T4639 97 Infinity Q4 - Dealer.com US · 2019-08-05 · c NEVER drive under the influence of alcohol...

FOREWORD

Your INFINITI represents a new way of thinkingabout car design. It integrates advanced engineer-ing and superior craftsmanship with a simple,refined aesthetic sensitivity associated with tradi-tional Japanese culture.

The result is a different notion of luxury and beauty.The car itself is important, but so also is the senseof harmony that the car evokes in its driver, and thesense of satisfaction you feel with the INFINITI—from the way it looks and drives to the high levelof dealer service.

To ensure that you enjoy your INFINITI to thefullest, we encourage you to read this Owner’sManual immediately. It explains all of the features,controls and performance characteristics of yourINFINITI; it also provides important instructions andsafety information.

A separate Warranty Information Booklet is to befound in your Owner’s literature portfolio. Alwayscarry it with you when you take your INFINITI to anauthorized dealer. The portfolio contents providecomplete information about all warranties coveringthis vehicle, the periodic maintenance required tokeep the warranties in effect as well as the INFINITIRoadside Assistance program.

INFINITI is dedicated to providing a satisfyingownership experience for as long as you own your

car. Should you have any questions regarding yourINFINITI or your INFINITI dealer, please contact ourConsumer Affairs department at 1-800-662-6200.In Hawaii 808-836-0848 (Oahu number). In Canada1-800-363-4520. Thank you.

WHEN READING THEMANUALThis manual includes information forall options available on this model.Therefore, you may find some informa-tion that does not apply to your vehicle.

All information, specifications and illustra-tions in this manual are those in effect at thetime of printing. INFINITI reserves the right tochange specifications or design at any timewithout notice.

MODIFICATION OF YOURVEHICLE

This vehicle should not be modified.Modification could affect its perfor-mance, safety or durability, and mayeven violate governmental regula-

tions. In addition, damage or perfor-mance problems resulting frommodification may not be coveredunder INFINITI warranties.

READ FIRST — THEN DRIVESAFELYBefore driving your vehicle please read yourOwner’s Manual carefully. This will ensurefamiliarity with controls and maintenance re-quirements, assisting you in the safe opera-tion of your vehicle.

WARNING

IMPORTANT SAFETYINFORMATIONREMINDERS FOR SAFETY!

Follow these five important drivingrules to help ensure a safe andcomfortable trip for you and yourpassengers!

Z 96.12.20/FY33d X

● NEVER drive under the influenceof alcohol or drugs.

● ALWAYS observe posted speedlimits and never drive too fast forconditions.

● ALWAYS use your seat belts andappropriate child restraint sys-tems.

● ALWAYS provide informationabout the proper use of vehiclesafety features to all occupants ofthe vehicle.

● ALWAYS review this Owner’sManual for important safetyinformation.

IMPORTANT INFORMATIONABOUT THIS MANUAL

You will see the various symbols in thismanual. They are used in the following ways:

WARNING

This is used to indicate the presenceof a hazard that could cause death orserious personal injury. To avoid orreduce the risk, the procedures mustbe followed precisely.

CAUTION

This is used to indicate the presenceof a hazard that could cause minor ormoderate personal injury or dangerto your vehicle. To avoid or reducethe risk, the procedures must befollowed carefully.

If you see this symbol, it means ‘‘Do not dothis’’ or ‘‘Do not let this happen’’.

© 1996 NISSAN MOTOR CO., LTD.TOKYO, JAPAN

All rights reserved. No part of this Owner’s Manual may bereproduced or stored in a retrieval system, or transmittedin any form, or by any means, electronic, mechanical,photocopying, recording or otherwise, without the priorwritten permission of Nissan Motor Co., Ltd.

SII0151

Z 96.12.20/ X

Z 96.12.20/ X

TABLE OF CONTENTS

INSTRUMENTS AND CONTROLS .......................................................... 1-1

PRE-DRIVING CHECKS AND ADJUSTMENTS............................................ 2-1

HEATER/AIR CONDITIONER/AUDIO ....................................................... 3-1

STARTING AND DRIVING................................................................... 4-1

IN CASE OF EMERGENCY .................................................................. 5-1

APPEARANCE AND CARE................................................................... 6-1

DO-IT-YOURSELF ............................................................................ 7-1

MAINTENANCE ............................................................................... 8-1

TECHNICAL AND CONSUMER INFORMATION........................................... 9-1

INDEX ........................................................................................ 10-1

Z 96.12.20/ X

Z 96.12.20/ X

1 INSTRUMENTS AND CONTROLS

Meters and gauges .................................... 1-3Warning/indicator light and chime ............. 1-7Security systems ...................................... 1-12Windshield wiper and washer switch ...... 1-14Rear window and outside door mirrordefogger switch ....................................... 1-15Headlight and turn signal switch ............. 1-16Front fog light switch ............................... 1-18Instrument brightness control ................. 1-18Hazard warning flasher switch ................. 1-19Heated seats (If so equipped) .................. 1-19Traction control (TCS) cancel switch ...... 1-20

Cigarette lighters and ashtrays ................ 1-21Cup holder ............................................... 1-22Console box ............................................. 1-23Power window ......................................... 1-24Sunroof (If so equipped) ......................... 1-25Clock ........................................................ 1-26Interior light ............................................. 1-26Personal light ........................................... 1-27Vanity mirror light .................................... 1-28Integrated HomeLinkT Transmitter .......... 1-28

Z 96.12.20/ X

SII0157

See the page indicated in parentheses for operating details.

INSTRUMENTS AND CONTROLS

1-2

Z 96.12.20/ X

METERS AND GAUGES

20

00

40

80

120160

200

240

km/hMPH

E CF H

x1000r/min

PREMIUM UNLEADEDFUEL ONLY

0

1

2

34 5

6

7

8

40

6080

100

120

140

160

P

R

N

D

2

1

SII0072


1-3

Z 96.12.20/ X

SPEEDOMETER

The speedometer indicates vehicle speed.

ODOMETER

The odometer records the total mileage thevehicle has been driven.

TRIP ODOMETER

The trip odometer records the distance ofindividual trips. Before each trip, set the tripodometer to zero by pushing the RESETbutton.

TACHOMETER

The tachometer indicates engine speed inrevolutions per minute (r/min).

CAUTION

When engine speed approaches thered zone, shift to a higher gear.Operating the engine in the red zonemay cause serious engine damage.

SII0073

SII0074


1-4

Z 96.12.20/ X

ENGINE COOLANT TEMPERA-TURE GAUGE

The gauge indicates engine coolant tempera-ture.

Engine coolant temperature will vary with theoutside air temperature and driving condi-tions.

CAUTION

If the gauge indicates over the nor-mal range, stop the vehicle as soonas safely possible. If the engine isoverheated, continued operation ofthe vehicle may seriously damagethe engine. See ‘‘In case ofemergency’’ section for immediateaction required.

FUEL GAUGE

The gauge indicates the APPROXIMATE fuellevel in the tank.

The gauge may move slightly during braking,turning, acceleration, or going up or downhill.

The gauge needle is designed to remain inapproximately the same position, even whenthe ignition key is turned ‘‘OFF’’.

Refill the fuel tank before the gaugeregisters Empty.

The indicator light comes on when the fueltank is getting low. Refuel as soon as it isconvenient, preferably before the gauge

SII0075

SII0076


1-5

Z 96.12.20/ X

reaches ‘‘E’’. There should be a small reserveof fuel in the tank when the fuel gauge needlereaches ‘‘E’’.


1-6

Z 96.12.20/ X

WARNING/INDICATOR LIGHT AND CHIME

or Brake warning light Supplemental air bag warning light CRUISE indicator light

Turn signal/hazard indicator lights Low washer fluid warning light Traction control system indicator light

High beam indicator light (Blue) orAnti-lock brake systemwarning light Slip indicator light

Charge warning light Stop/tail warning light Overdrive off indicator light

Door open warning light or Malfunction indicator light.

Seat belt warning light Engine oil pressure warning light

Checking bulbs

Apply the parking brake and turn the ignitionkey to ‘‘ON’’ without starting the engine. Thefollowing lights will come on:

, or , , or ,or , ,

The following lights come on briefly and thengo off:

,

If any light fails to come on, it may indicate aburned-out bulb or an open circuit in theelectrical system. Have the system repaired

promptly.


1-7

Z 96.12.20/ X

Engine oil pressure warn-ing light

This light warns of low engine oil pressure. Ifthe light flickers or comes on during normaldriving, pull off the road in a safe area, stopthe engine immediately and call an INFINITIdealer or other authorized repair shop.

The oil pressure warning light is notdesigned to indicate a low oil level.Use the dipstick to check the oil level.See ‘‘Engine oil’’ in the ‘‘Do-it-yourself’’ sec-tion.

CAUTION

Running the engine with the oil pres-sure warning light on could causeserious damage to the engine al-most immediately. Turn off the en-gine as soon as it is safe to do so.See Section 5, In case of emer-gency.

Charge warning light

If the light comes on while the engine isrunning, it may indicate that there is some-thing wrong with the charging system. Turnthe engine off and check the alternator belt. Ifthe belt is loose, broken, missing or if thelight remains on, see your INFINITI dealerimmediately.

CAUTION

Do not continue driving if the belt isloose, broken or missing. See sec-tion 5, In case of emergency.

Door open warning light

This light comes on when any of the doors arenot closed securely while the ignition key is‘‘ON’’.

Supplemental air bagwarning light

When the ignition key is in the ‘‘ON’’ or‘‘START’’ position, the supplemental air baglight will illuminate for about 7 seconds andthen turn off. This means the system isoperational.

If any of the following conditions occur, thesupplemental air bag needs servicing andyour INFINITI must be taken to your nearestauthorized INFINITI dealer.

1. The supplemental air bag light goes offwithin 7 seconds.

2. The supplemental air bag light flashesintermittently or remains on (after 7 sec-onds).

3. The supplemental air bag light does notcome on at all.

Unless checked and repaired, the Supplemen-


1-8

Z 96.12.20/ X

tal Restraint System may not function prop-erly.

For additional details on the Supplemental AirBag System, see section 2.

WARNING

If the supplemental air bag warninglight is on, it could mean that thesupplemental air bag system will notoperate in an accident.

Seat belt warning lightand chime

The light and chime remind you to fasten seatbelts. The light illuminates whenever theignition key is turned to ‘‘ON’’, and will remainilluminated until the driver’s seat belt isfastened. (When the ignition key is turned to‘‘ON’’ with the driver’s seat belt fastened, thelight will illuminate for about 7 seconds and

then go off.) At the same time, the chime willsound for about six seconds unless thedriver’s seat belt is securely fastened.

Refer to ‘‘Seat belts’’ in the ‘‘Pre-drivingchecks and adjustments’’ section for precau-tions on seat belt usage.

If the seat belt warning light blinks, there maybe something wrong with the pre-tensionerseat belt. In this case, the pre-tensioner willnot operate properly. Have it checked by yourINFINITI dealer.

For additional details on the pre-tensionerseat belt system, see section 2.

Low washer fluid warninglight

This light comes on when the washer tankfluid is at a low level. Add washer fluid asnecessary. See the ‘‘Do-it-yourself’’ section.

or Brake warninglight

This light functions for both the parking brakeand the foot brake systems.

Parking brake indicator:

The light comes on when the parking brake isapplied.

Low brake fluid warning:

The light warns of a low brake fluid level. If thelight comes on while the engine is runningwith the parking brake not applied, stop thevehicle and perform the following:

1. Check the brake fluid level. Add brake fluidas necessary. See ‘‘Brake fluid’’ in the‘‘Do-it-yourself’’ section.

2. If the brake fluid level is correct:

Have the warning system checked by anINFINITI dealer.


1-9

Z 96.12.20/ X

WARNING

O Your brake system may not beworking properly if the warninglight is on. Driving could be dan-gerous. If you judge it to be safe,drive carefully to the nearest ser-vice station for repairs. Other-wise, have your vehicle towed.

O Pressing the brake pedal with theengine stopped could increaseyour stopping distance and brak-ing will require greater pedal ef-fort as well as pedal travel.

O If the level is below the MINIMUMmark on the brake fluid reservoir,do not drive until the brake sys-tem has been checked at anINFINITI dealer.

or Anti-lock brakewarning light

If the light comes on while the engine isrunning, it may indicate there is somethingwrong with the anti-lock portion of the brakesystem. In either case, have the systemchecked by your INFINITI dealer.

If an abnormality occurs in the system, theanti-lock function will cease but the ordinarybrakes will continue to operate normally.

If the light comes on while you aredriving, contact your INFINITI dealer forrepair.

Traction control systemindicator light

When the traction control system switch is off,this light comes on. When the TCS indicatorlight and slip indicator light come on with thetraction control system switch turned on, thislight alerts the driver to the fact that thetraction control system’s fail-safe mode is

operating i.e. that the traction control systemis temporarily out of order.

Have the system checked by your INFINITIdealer. If an abnormality occurs in the system,the traction control function will be canceledbut the vehicle can still be driven. See‘‘Traction control system’’ in the ‘‘Starting anddriving’’ section.

Slip indicator light

This indicator will blink when the tractioncontrol system is operating, thus alerting thedriver to the fact that the road surface isslippery and the vehicle is nearing its tractionlimits.

Overdrive off indicatorlight

This light comes on when the overdrive switchis pushed to the ‘‘OFF ’’ position.

However when the ignition key is in the ‘‘ON’’or ‘‘START’’ position and the overdrive switch


1-10

Z 96.12.20/ X

is not in the ‘‘OFF ’’ position, the lightwill illuminate for about 2 seconds and thenturn off. This means the system is operational.

Turn signal/hazard indica-tor lights

The light flashes when the turn signal switchlever or hazard switch is turned on.

Stop/tail warning light

If the light comes on with the engine runningand with the light switch on, or when the brakepedal is depressed, one or more stop/tail lightbulbs are burned out. Replace the stop/taillight bulb.

High beam indicator light(Blue)

This light comes on when the headlight highbeam is on and goes out when the low beamis selected.

CRUISE indicator light

The light comes on while the vehicle speed iscontrolled by the cruise control system.

Key reminder chime

The chime will sound if the driver side door isopened while the key is left in the ignitionswitch (ignition switch is turned off). Removethe key and take it with you when leaving thevehicle.

Light reminder chime

A chime will sound when the driver side dooris opened if the light switch is turned on(ignition switch is turned off).

Turn the light switch off when you leave thevehicle.

Brake pad wear warning

The disc brake pads have audible wear warn-ings. When a brake pad requires replacement,it will make a high pitched scraping sound

when the vehicle is in motion whether or notthe brake pedal is depressed. Have the brakeschecked as soon as possible if the warningsound is heard.

or Malfunction indi-cator light (MIL)

If the Malfunction indicator light comes onsteady or blinks while the engine is running,it may indicate a potential emission controlproblem.

The Malfunction indicator light will come onin one of two ways:

O Malfunction indicator light on steady —An emission control system malfunctionhas been detected. Have the vehicleinspected by an authorized INFINITIdealer. You do not need to have yourvehicle towed to the dealer.

O Malfunction indicator light blinking — Anengine misfire has been detected whichmay damage the emission control system.


1-11

Z 96.12.20/ X

To reduce or avoid emission control sys-tem damage:

* do not drive at speeds above 45 MPH(72 km/h).

* avoid hard acceleration or deceleration.* avoid steep uphill grades.* if possible, reduce the amount of cargo

being hauled or towed.

The malfunction indicator light may stopblinking and come on steady.

Have the vehicle inspected by an autho-rized INFINITI dealer. You do not need tohave your vehicle towed to the dealer.

CAUTION

Continued vehicle operation withouthaving the emission control systemchecked and repaired as necessary

could lead to poor driveability, re-duced fuel economy, and possibledamage to the emission control sys-tem, which may affect your warrantycoverage.

Some conditions may cause the malfunctionindicator light to come on steady or blink.

For example, running the vehicle out of fuel,which causes the engine to misfire, may causethe malfunction indicator light to come onsteady or blink.

If you suspect that you experienced such acondition, drive the vehicle to an authorizedINFINITI dealer and have the vehicle in-spected. Avoid any unnecessary diagnosisduring the service by informing the dealer ofthe condition that may have occurred.

SECURITY SYSTEMSYour vehicle has two types of security system,as follows:

O Theft warning

O IPPS (Infiniti Personalized Protection Sys-tem)

The security condition will be shown by thesecurity indicator light.


1-12

Z 96.12.20/ X

SECURITY INDICATOR LIGHT

This light blinks whenever the ignition switchis in the ‘‘LOCK’’, ‘‘OFF’’ or ‘‘ACC’’ position.This function indicates the security systemsequipped on the vehicle.

Light remains on:

When IPPS is malfunctioning, this light willremain on while the ignition key is in the ‘‘ON’’position.

If the light still remains on and/or theengine will not start, see your INFINITI

dealer for IPPS service as soon aspossible. Please bring all IPPS keysthat you have when visiting yourINFINITI dealer for service.

THEFT WARNING

The theft warning system provides visual andaudio alarm signals to deter theft of thevehicle.

How to arm the theft warningsystem

1. Close all windows.

2. Remove the key from the ignition switch.

3. Close and lock all doors, hood and trunklid. The doors can be locked either with akey, multi-remote controller or door lockknob.

The system can be armed even if thewindows are open.

4. Confirm that the indicator light comes on.

The light will glow for about 30 secondsand then blink. The system is now armed.If, during this 30 second time period, thedoor or trunk lid is unlocked with a key ormulti-remote controller or the ignition keyis turned to ‘‘ACC’’ or ‘‘ON’’, the system willnot be armed. However, when the trunk lidis closed after being unlocked with a key ormulti-remote controller, the system returnsto the armed phase.

O If the key is turned slowly toward thefront of the vehicle when locking thedoor, the system may not activate. Ifthe key is returned beyond the ver-tical position toward the rear of thevehicle to remove the key, the sys-tem may be deactivated. When theindicator light fails to glow for 30seconds, unlock the door once andlock it again.

O Even when the driver and/or passen-gers are in the vehicle, the systemwill activate with all doors, hood,

SII0077


1-13

Z 96.12.20/ X

and trunk lid locked and ignition keyoff. When turning the ignition to‘‘ACC’’, the system will be released.

Theft warning system operation

The warning system will give the followingalarm:

O The headlights blink and the horn soundsintermittently.

O The alarm automatically turns off after 2 to3 minutes; however, the alarm will reacti-vate if the vehicle is tampered with again.

The alarm is activated by:

O Unlocking the door or opening the trunklid without using the key or multi-remotecontroller. (Even if the door is opened byreleasing the door inside lock knob or thetrunk lid is opened by operating the trunklid release switch, the alarm is activated.)

O Opening the hood.

How to stop alarm

The alarm will stop by unlocking a door ortrunk lid with the key or by pushing either theunlock or trunk lid release button on the multi-remote controller. The alarm will not stop if theignition switch is turned to ‘‘ACC’’ or ‘‘ON’’.

If the system does not operate as de-scribed above, have it checked by yourINFINITI dealer.

IPPS (Infiniti Personalized Pro-tection System)

The IPPS will not allow the engine to startwithout the use of the registered IPPS key.

If the engine failed to start using the registeredIPPS key (for example when keys are contact-ing), restart the engine using the followingprocedures:

1. Leave the ignition key in the ‘‘ON’’ positionfor approximately 5 seconds.

2. Turn ignition key to the ‘‘OFF’’ or ‘‘LOCK’’

position and wait approximately 5 sec-onds.

3. Repeat step 1 and 2 again.

4. Restart the engine while keeping the keyseparate from any other keys on thekey-chain.

WINDSHIELD WIPER ANDWASHER SWITCH

The windshield wiper and washer operateswhen the ignition key is in the ‘‘ACC’’ or ‘‘ON’’position.

IIC041-A


1-14

Z 96.12.20/ X

Push the lever down to operate the wiper. Pullthe lever toward you to operate the washer.

The intermittent operation time can be ad-justed by turning the knob as follows:O While driving: from 0.4 to 12 seconds

O While stopped: from 4 to 20 seconds

CAUTION

The following could damage thewasher system:

O Do not operate the washer con-tinuously for more than 30 sec-onds.

O Do not operate the washer if thereservoir tank is empty.

WARNING

In freezing temperatures the washer

solution may freeze on the wind-shield and obscure your vision whichmay lead to an accident. Warmwindshield with the defroster beforeyou wash the windshield.

REAR WINDOW AND OUT-SIDE DOOR MIRROR DE-FOGGER SWITCH

To defog the rear window glass and the

outside door mirrors, start the engine andpush the switch on. (The indicator light willcome on.) Push the switch again to turn thedefogger off.

It will automatically turn off in approximately15 minutes.

CAUTION

When cleaning the inner side of thewindow, be careful not to scratch ordamage the rear window defogger.

SII0078


1-15

Z 96.12.20/ X

HEADLIGHT AND TURNSIGNAL SWITCH

Lighting

Turn the switch to the ‘‘AUTO’’ position:

When the ignition key is in the ‘‘ON’’ position,the parking light, headlight and other lightsturn on automatically, depending on thebrightness of the surroundings. When theignition key is turned to the ‘‘ACC’’, ‘‘OFF’’ or‘‘LOCK’’ position with the autolamp switch in

the maximum ‘‘Short’’ position, the light willturn off automatically.

When the light switch is turned to the‘‘ ’’ position, the headlight low or highbeam will turn off.

Turn the switch to the ‘‘ ’’ position:

The parking, side marker, tail, license plateand instrument lights will come on.

Turn the switch to the ‘‘ ’’ position:

Headlights will come on and all the otherlights remain on.

Headlight beam select

To select the high beam, push the leverforward. Pull it back to select the low beam.

Passing signal

Pulling the lever toward you will flash theheadlight high beam.

SII0079

SII0080


1-16

Z 96.12.20/ X

Autolamp switch (Shut-off delay)

The length of time the autolamps stay on afterthe ignition key is turned to ‘‘OFF’’ whileheadlight switch is in the ‘‘AUTO’’ positiondepends on how far the autolamp switch isturned. If the switch is turned fully in theabove direction, the headlights will stay on fora longer time (a few minutes).

Photo sensor for autolamp

Be sure not to put anything on top of thephoto sensor located on the top left-hand side of the instrument panel. Thephoto sensor controls the autolamp; if itis covered, the photo sensor reacts as ifit is dark and the headlights will illumi-nate.

Daytime running light system(For Canada)

The headlights automatically illuminate at a

reduced intensity when the engine is startedwith the parking brake released. The daytimerunning lights operate with the headlightswitch in the ‘‘OFF’’ position or in the ‘‘ ’’position. Turn the headlight switch to the‘‘ ’’ position for full illumination whendriving at night.

If the parking brake is applied before theengine is started, the daytime running lightsdo not illuminate. The daytime running lightsilluminate once the parking brake is released.The daytime running lights will remain onuntil the ignition switch is turned off.

WARNING

When the daytime running light sys-tem is active, tail lights on yourvehicle will not be on. It is necessaryat dusk to turn on your headlights.

SII0081 SII0082


1-17

Z 96.12.20/ X

Failure to do so could cause anaccident injuring yourself and oth-ers.

Turn signal switch

Move the lever up or down to signal theturning direction. When the turn is completed,the turn signals cancel automatically.

Lane change signal

To indicate a lane change, move the lever up

or down to the point where lights beginflashing.

FRONT FOG LIGHTSWITCH

Turn the knob to activate the fog lights. Thefog lights can only be activated when theheadlight switch is in the ‘‘ ’’ position.

INSTRUMENT BRIGHT-NESS CONTROL

The instrument brightness control operateswhen the light switch is in the ‘‘ ’’ or‘‘ ’’ position.

Turn the control to adjust the brightness ofinstrument panel lights and power windowswitch lights.When the control is turned in the upperdirection until a click sound is heard, the lightintensity will be at maximum. When thecontrol is turned in the lower direction until a

SII0083

SII0084

SII0085


1-18

Z 96.12.20/ X

click sound is heard, the light will be turnedoff.

HAZARD WARNINGFLASHER SWITCH

Push the switch on to warn other drivers whenyou must stop or park under emergency con-ditions. All turn signal lights will flash.

WARNING

O When stalled or stopped on the

roadway under emergency condi-tions, move the vehicle well offthe road.

O Do not use the switch while mov-ing on the highway unless un-usual circumstances force you todrive so slowly that your vehiclemight become a hazard to othertraffic.

O Turn signals do not work whenthe switch is operating.

The flasher can be actuated with the ignitionswitch either off or on.

Some state laws may prohibit the use ofthe hazard warning flasher switch whiledriving.

HEATED SEATS (If soequipped)

The front seats are warmed by built-in heaters.The switches located on the center consolecan be operated independently of each other.

1. Start the engine.

SII0086

SII0087


1-19

Z 96.12.20/ X

CAUTION

The battery could run down if theheater is operated while the engineis not running.

2. Push the ‘‘LOW’’ or ‘‘HIGH’’ position of theswitch, as desired, depending on the tem-perature. The indicator light in the switchwill illuminate.

The heater is controlled by a thermostat,automatically turning the heater on and off.The indicator light will remain on as longas the switch is on.

3. When the vehicle’s interior is warmed orbefore you leave the vehicle, be sure toturn the switch off.

CAUTION

Do not use the seat heater for a longtime or when no one is seated there.

O Do not put anything on the seatwhich insulates heat, such as ablanket, cushion, seat cover, etc.Otherwise, the seat may becomeoverheated.

O Do not place anything hard orheavy on the seat or pierce it witha pin or similar object. This mayresult in damage to the heater.

O Any liquid spilled on the heatingseat should be immediatelywiped up with a dry cloth.

O When cleaning the seat, neveruse benzine, thinner, or any simi-lar materials.

O If any abnormalities are found orthe heating seat does not oper-ate, turn the switch OFF and havethe system checked by yourINFINITI dealer.

TRACTION CONTROL (TCS)CANCEL SWITCH

To cancel the TCS (traction control system),push the TCS cancel switch on. The indicator

SII0088


1-20

Z 96.12.20/ X

‘‘TCS OFF’’ will come on. Push it again to turnit ON.

See ‘‘Traction control system’’ in the ‘‘Startingand driving’’ section.

CIGARETTE LIGHTERSAND ASHTRAYS

The cigarette lighter operates when the igni-tion switch is in the ‘‘ACC’’ or ‘‘ON’’ position.

Push the lighter in all the way, then release it.When the lighter is heated, it will spring out.

Return the lighter to its original position afteruse.

To empty the ashtray, pull up on the horizon-tal bar and remove the tray.

SII0089

SII0090


1-21

Z 96.12.20/ X

WARNING

The cigarette lighter should not beused while driving in order that fullattention may be given to the drivingoperation.

CAUTION

The cigarette lighter socket is apower source for the cigarettelighter element only. The use of thecigarette lighter socket as a powersource for any other accessory is notrecommended.

CUP HOLDER

To open, push the cup holder opener switch.

To close, lower the cup holder lid and pushdown lightly.

Use the cup holder properly and according tothe size of the cups.

The inner cases can be removed for cleaning.

WARNING

The cup holder should not be used

SII0091

SII0092


1-22

Z 96.12.20/ X

while driving in order that full atten-tion may be given to the drivingoperation.

CAUTION

O Avoid abrupt starting and brakingwhen the cup holder is being usedto prevent spilling the drink. If theliquid is hot, it can scald you oryour passenger.

O Use only soft cups in the cupholder. Hard objects can injureyou in an accident.

CONSOLE BOX

Upper part:

O Push the button on the side of the lid toopen the upper part sideways.

O The lid can be opened from the driver andfront passenger seats.

O The dividing plates can be moved to thedesired positions.

O The front part is designed to be used as acard case and coin case.

To open the lid, the right and left sides it mustbe closed securely.

Lower part:

While pushing up the button, open the cover.

WARNING

O The console box should not beused while driving in order thatfull attention may be given to thedriving operation.

O Keep the center console box lidclosed while driving to preventinjury in an accident or a suddenstop.

SII0093


1-23

Z 96.12.20/ X

POWER WINDOW

WARNING

O Make sure that all passengershave their hands, etc. inside thevehicle before closing the win-dows. Use the window lock switchto prevent unexpected use of thepower windows.

O Do not leave children unattendedinside the vehicle. They couldunknowingly activate switches orcontrols and become trapped in awindow. Unattended childrencould become involved in seriousaccidents.

The power windows only operate when theignition key is in the ‘‘ON’’ position.

OPERATING DRIVER’SSWITCH

To open or close the window, push down orpull up the switch and hold it. The mainswitch (driver side switches) will open orclose all the windows.

Locking passenger’s window

When the lock button is pushed in, only thedriver side window can be opened or closed.Push it in again to cancel.

Automatic operation

To fully open the driver side window, com-pletely press down the ‘‘AUTO’’ switch andrelease it; it need not be held. The window willautomatically open all the way. To stop thewindow, just pull up the switch toward the‘‘CLOSE’’ side.

OPERATING PASSENGER’SSWITCH

The passenger side switch will open or closeonly the corresponding window. To open or

SII0094A

SII0095


1-24

Z 96.12.20/ X

close the window, hold the switch down or up.

SUNROOF (If so equipped)The sunroof will only operate when the igni-tion key is in the ‘‘ON’’ position.

Sliding the sunroof

To open the roof, keep pressing the switch tothe ‘‘OPEN’’ side.

To close the roof, keep pressing the switch tothe ‘‘CLOSE’’ side.

Tilting the sunroof

To tilt up, first close the sunroof, then keeppushing the ‘‘UP’’ side of the tilt switch. To tiltdown the sunroof, keep pushing the ‘‘DOWN’’side.

WARNING

O In an accident you could bethrown from the vehicle throughan open sunroof. Always use seatbelts and child restraints prop-erly.

O Do not allow anyone to stand upor extend any portion of theirbody out of the opening while thevehicle is in motion or while thesunroof is closing.

CAUTION

O Remove water drops, snow, iceor sand from the sunroof beforeopening.

O Do not place any heavy object onthe sunroof or surrounding area.

If the sunroof does not close

Have your INFINITI dealer check and repair thesunroof.

SII0096


1-25

Z 96.12.20/ X

CLOCK

The digital clock displays time when theignition key is in ‘‘ACC’’ or ‘‘ON’’.

If the power supply is disconnected, theclock will not indicate the correct time.Readjust the time.

Adjusting the time

Push the ‘‘H’’ button to adjust the hour.

Push the ‘‘M’’ button to adjust theminute.

INTERIOR LIGHTThe interior light switch has a three-position.

While the switch is in the center ‘‘O’’ position,the front and rear personal, console and footwell lights will illuminate under the followingconditions:

O driver’s door is unlocked.

— remain on for a maximum of 30seconds.

O driver’s door is opened.

— remain on for a maximum of 30seconds after driver’s door is closed.

O ignition key is removed from key cylinder.

— remain on for a maximum of 30seconds.

The lights will go off when the ignition key isin the ‘‘ACC’’ or ‘‘ON’’ position, or the driver’sdoor is closed and locked.

The lights will also go off after 30 minuteswhile doors are open.

When some doors are opened, the door steplight for each open door will come on and theclosed door’s personal lights will darken.

SII0097

SII0098


1-26

Z 96.12.20/ X

CAUTION

Leaving the interior light switch inthe ON position for extended periodsof time will result in a dischargedbattery.

PERSONAL LIGHT

When the switch is pushed in with the interiorlight switch in the center ‘‘O’’ position, the

light will turn on. When the switch is pushedagain, the light will turn off.

The lights will turn on/off depending on whatside of the switch is pressed:

j1 The light stays on when pressed to thisposition.

j2 When the front door is opened, both theright and left seat lights come on. Theyturn off when the door is closed. When therear door is opened both left and rightlights come on. When it is closed, the

lights turn off immediately.

j3 When the switch is pressed, both right andleft lights come on.

* The switches face forward in the vehicle.

If the interior light switch is in OFF position,the personal light will not turn on when theany of the doors are opened.

SII0099

SII0100


1-27

Z 96.12.20/ X

VANITY MIRROR LIGHT

The light on the vanity mirror will turn onwhen the cover on the vanity mirror is opened.

INTEGRATED HomeLinkTTRANSMITTERThe Integrated HomeLinkT Transmitter pro-vides a convenient way to consolidate thefunctions of up to three individual hand-heldtransmitters into one built-in device.

THE INTEGRATED HomeLinkTTRANSMITTER:

O will operate garage doors, gates, home/office lighting systems and security sys-tems by storing and transmitting the pro-gramming information of your currenthand-held transmitters.

O is built-in and powered by your vehicle’sbattery and charging system. No separatebatteries are necessary.

WARNING

Do not use this IntegratedHomeLinkT Transmitter with any ga-rage door opener that lacks safetystop and reverse features as re-quired by federal safety standards(these standards became effectivefor models manufactured after April1, 1982). A garage door openerwhich cannot ‘‘detect’’ an object inthe path of a closing garage door andthen automatically stop and reversethe door, does not meet currentfederal safety standards. Using agarage door opener without thesefeatures increases the risk of seriousinjury or death.

SII0101


1-28

Z 96.12.20/ X

PROGRAMMING THEHomeLinkT TRANSMITTER

WARNING

During the programming procedureyour garage door or security gatewill open and close (if the transmit-ter is within range). Make sure thatpeople or objects are clear of thegarage door, gate, etc. that you are

programming.

Your vehicle’s engine should beturned off while programming yourtransmitter. The IntegratedHomeLinkT Transmitter may notwork with older garage door openersthat do not meet current FederalConsumer Safety Standards.

1. Test the Integrated HomeLinkT Transmit-ter by pressing any button. The red indi-cator light should come on. If you havepreviously programmed a button proceedto step 3.

2. Clear all channels on the IntegratedHomeLinkT Transmitter by holding downboth outside buttons (#1 & #3) until thered light begins to flash rapidly (approxi-mately 20 seconds). Then release bothbuttons.

3. Select which of the three IntegratedHomeLinkT Transmitter buttons you wantto program.

4. Hold your hand-held transmitter againstthe bottom surface of the IntegratedHomeLinkT Transmitter so that you canstill see the red indicator light.

5. Press the desired button until the redindicator light flashes slowly. Do notrelease the button. Continue holding andpress the hand-held transmitter buttonthrough step 6.

6. Hold down both buttons until the redindicator light on the IntegratedHomeLinkT Transmitter flashes rapidly(This may take 1 to 90 seconds). Thenrelease both buttons. The rapid flashingmeans that the transmitter has been suc-cessfully programmed to match yourhand-held transmitter. You can now usethe Integrated HomeLinkT Transmitter in-

SII0102


1-29

Z 96.12.20/ X

stead of your hand-held transmitter.

Note to Canadian users:

Prior to 1992, D.O.C. regulations requiredmany hand-held transmitters to stop transmit-ting after one or two seconds, even thoughyou continue to hold down the button. If youthink you have one of these hand-held trans-mitters, you should press and re-press thetransmitter button every 2 seconds withoutever releasing the integrated HomeLinkTTransmitter button. The indicator light on theIntegrated HomeLinkT Transmitter shouldblink rapidly indicating a successful program-ming procedure. If it returns to the slow blinkof program mode, continue to periodicallyreactivate your hand-held transmitter until asuccessful programming procedure is indi-cated by the rapidly flashing indicator light.

OPERATING THE TRANSMIT-TER

To operate, simply press the appropriate

button on the Integrated HomeLinkT Trans-mitter. The red indicator light illuminateswhile the signal is being transmitted. Theeffective transmission range of the IntegratedHomeLinkT Transmitter may differ from yourhand-held transmitter.

PROGRAMMING PROBLEMDIAGNOSIS

Be sure to keep your original hand-heldtransmitter for possible reprogramming if nec-essary.

O Make sure batteries in the hand-heldtransmitter are fully charged.

O Hold your hand-held transmitter againstthe bottom surface of the IntegratedHomeLinkT Transmitter so that you canstill see the red indicator light.

O Hold buttons for duration of the program-ming without interruption.

O Rotate your hand-held transmitter end-

over-end and program again. For bestresults, place the end opposite the batterycompartment against the IntegratedHomeLinkT Transmitter when program-ming.

ROLLING CODES (If soequipped)

If your hand held transmitter appears to trainto the HomeLinkT Transmitter, but does notopen your garage door, and your garage dooropener was manufactured after 1995, yourgarage door opener may have a ‘‘Code

SIP0198


1-30

Z 96.12.20/ X

Protected’’ or ‘‘Rolling Code’’ feature. This typeof system will change the ‘‘code’’ of yourgarage door opener every time you open orclose your garage door.

To determine if you have one of thesesystems, depress the button on theHomeLinkT Transmitter that you have justprogrammed. If the LED on the HomeLinkTTransmitter flashes rapidly for 1 to 2 seconds,then remains on, your garage door opener hasa rolling code system.

To operate your ‘‘Rolling Code’’ garage dooropener from your HomeLinkT Transmitter,follow these steps:

1. Program your hand held transmitter to theHomeLinkT Transmitter by following theprocedures outlined above (if not yet pro-grammed).

2. Program your garage door opener receiverto recognize your HomeLinkT Transmitter(The HomeLinkT Transmitter follows the

same procedure to train to the receiver asyour hand held transmitter did when it wasfirst installed):

a) Remove the cover panel from yourgarage door opener receiver. Thereceiver should be located by thegarage door opener motor.

b) Locate the training button on thegarage door opener receiver. Theexact location and color of the buttonmay vary by garage door openerbrand. If you have difficulty locatingthe training button, reference yourgarage door opener manual. If youhave difficulty programming your ga-rage door opener equipped with arolling code system to recognize theHomeLinkT Transmitter with the‘‘Rolling Code’’ feature, call INFINITIConsumer Affairs Department.

c) Press the training button on the ga-

rage door opener receiver for 1 to 2seconds.

d) Return to the HomeLinkT Transmitterin the vehicle, and depress the pro-grammed HomeLinkT button for theduration of the fast blink on theHomeLinkT Transmitter (1 to 2 sec-onds). Release the button, and re-press to confirm that the system hastrained.

e) Your garage door opener should nowrecognize your HomeLinkT Transmit-ter. You may use either yourHomeLinkT Transmitter or youroriginal hand held transmitter to openyour garage door.

CLEARING THE PROGRAM-MING INFORMATION

Should you sell your vehicle, be sure to clearthe channels of the Integrated HomeLinkTTransmitter. To clear the channels, simulta-


1-31

Z 96.12.20/ X

neously hold down the outside two buttons(#1 & #3) until the red indicator light beginsto flash rapidly (approximately 20 seconds).This will clear all three buttons. Individualbuttons cannot be cleared, but can be repro-grammed at any time by following the pro-gramming procedures described above.

IF YOUR VEHICLE IS EVERSTOLEN

If your vehicle has been stolen, you shouldchange the codes of any device that wasprogrammed into the Integrated HomeLinkTTransmitter as soon as possible. Consult theowners manual of each device, or call themanufacturer or dealer of those devices.

When your vehicle is recovered, youwill need to reprogram the IntegratedHomeLinkT Transmitter with your newtransmitter information.

FCC Notice:

This device complies with FCC rules

part 15. Operation is subject to thefollowing two conditions: (1) This de-vice may not cause harmful interfer-ence and (2) This device must acceptany interference that may be received,including interference that may causeundesired operation.

The transmitter has been tested andcomplies with FCC and DOC/MDC rules.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’s au-thority to operate the device.

DOC: ISTC 1763K1313

FCC I.D.: CB2V67690


1-32

Z 96.12.20/ X

2 PRE-DRIVING CHECKS AND ADJUSTMENTS

Key ............................................................. 2-2Door locks .................................................. 2-3Multi-remote control system ...................... 2-5Hood release .............................................. 2-9Glove box lock .......................................... 2-10Trunk lid lock ........................................... 2-10Fuel filler lid lock ...................................... 2-11Seats ........................................................ 2-13Supplemental restraint system ................. 2-16Seat belts ................................................. 2-29

Child restraints for infants andsmall children ............................................ 2-37Automatic drive positioner ........................ 2-45Tilting steering column ............................ 2-47Telescopic steering column ..................... 2-48Outside mirror remote control ................. 2-48Foldable outside mirrors .......................... 2-49Automatic anti-dazzling inside mirror ...... 2-49Sun visors ................................................ 2-50

Z 96.12.20/ X

KEY

You can only drive your vehicle using themaster or security keys which are registered tothe IPPS (Infiniti Personalized Protection Sys-tem) components in your vehicle. These keyshave a transponder chip in the key head. (The

wallet key cannot be used to drive yourvehicle.)

The master key and wallet key can be used forall locks.

When the key case with the wallet keyis placed into your wallet, be carefulnot to apply excessive force to thewallet as it or other cards could bedamaged.

The security key cannot be used for the trunklid or glove box locks.

To protect belongings when you leave a keywith someone, give them the security keyonly.

Never leave these key in the vehicle.

Record the key number on the key numberplate supplied with your keys and keep it in asafe place (such as your wallet), NOT IN THEVEHICLE. INFINITI does not record any keynumber so it is very important to keep track of

your key number plate.

A key number is only necessary when youhave lost all keys and do not have one toduplicate from. If you still have a key, this keycan be duplicated by your INFINITI dealer.

IPPS KEY - Master and Security keys:

The key number is necessary when you needextra IPPS keys. As many as 5 IPPS keys canbe used with one vehicle. New keys must beregistered to the IPPS components in yourvehicle by your INFINITI dealer. At this time,you should bring all IPPS keys that you haveto your INFINITI dealer for registration. This isbecause the registration process will erase allmemory of the IPPS components.

SIP0091

PRE-DRIVING CHECKS AND ADJUSTMENTS

2-2

Z 96.12.20/ X

DOOR LOCKSLocking front doors with key

To lock the door, turn the key toward the frontof the vehicle.

To unlock, turn it toward the rear.

Locking the front door will simultaneouslylock the other doors.

Locking the doors without key

To lock the doors from the outside without akey, move the inside lock knob to the ‘‘LOCK’’position, then close the door.

When locking the door this way, be certain notto leave the key inside the vehicle.

The inside lock knob of the front door cannotbe set to the ‘‘LOCK’’ position with front dooropened and with the key in the ignition. If thisis attempted, all doors will unlock.

WARNING

O Always have the doors lockedwhile driving. Along with the useof seat belts, this providesgreater safety in the event of anaccident by helping to preventpersons from being thrown fromthe vehicle. This also helps keepchildren and others from uninten-tionally opening the doors, andwill help keep out intruders.

O Before opening any door, alwayslook for and avoid oncoming traf-fic.

O Do not leave children unattendedinside the vehicle. They couldunknowingly activate switches orcontrols. Unattended children

SIP0180

SIP0092


2-3

Z 96.12.20/ X

could become involved in seriousaccidents.

CHILD SAFETY REAR DOORLOCK

Child safety locking helps prevent doors frombeing opened accidentally, especially whensmall children are in the vehicle.

When the lever is in the lock position,

the rear door can be opened only fromthe outside.

POWER DOOR LOCK

The power door lock system allows you tolock or unlock all doors simultaneously.

O Turning the front door key to the front ofthe vehicle will lock all doors.

O Turning the front door key one time to therear of the vehicle will unlock the corre-sponding door. From that position, return-ing the key to Neutral (where the key can

only be removed and inserted.) and turn-ing it to the rear again within 3 secondswill unlock all doors.

O Pushing the front door lock knob in willlock all doors.

If the front doors are open with the keyin the ignition when the inside lockknob is set to the lock position, all doorknobs will unlock. When the open frontdoor is closed, all the knobs will lockthen quickly unlock automatically.

SIP0005SIP0181

SIP0093


2-4

Z 96.12.20/ X

O Operating the lock-unlock switch will lockor unlock all doors.

WARNING

O Before opening the door, alwayslook for and avoid oncoming traf-fic.

O Do not leave children unattendedinside the vehicle. They couldunknowingly activate switches orcontrols. Unattended childrencould become involved in seriousaccidents.

MULTI-REMOTE CONTROLSYSTEMIt is possible to lock/unlock all doors, torelease the trunk lid and to activate the panicalarm by using the remote controller fromoutside the vehicle.Before locking the doors, make sure thekey is not left in the vehicle.The remote controller can operate at a dis-tance of approximately 33 ft (10 m) from thevehicle. (The effective distance depends uponthe conditions around the vehicle.)As many as four remote controllers can beused with one vehicle. For information con-cerning the purchase and use of additionalremote controllers, contact your INFINITIdealer.

CAUTION

Listed below are conditions or oc-currences which will damage theremote controller.

O Do not allow the remote control-ler to become wet.

O Do not drop the remote control-ler.

O Do not strike the remote control-ler sharply against another ob-ject.

O Do not place the remote control-ler for an extended period in anarea where temperatures exceed140°F (60°C).


2-5

Z 96.12.20/ X

HOW TO USE MULTI-REMOTECONTROL SYSTEM

Locking doors

1. Remove the ignition key.

2. Close all doors.

3. Push the lock button on the remote con-troller.

4. All doors will lock.

5. The hazard indicator flashes twice.

O When the lock button is pushed with alldoors locked, the hazard indicator flashestwice as a reminder that the doors arealready locked.

SIP0094


2-6

Z 96.12.20/ X

Unlocking doors

1. Push the unlock button on the remotecontroller.

2. Only the driver side door will unlock. Pushthe unlock button on the remote controlleragain within 5 seconds.

3. All doors will unlock.

4. The interior light will stay on for 30seconds after unlocking the driver sidedoor when the interior light switch is in thecenter ‘‘O’’ position.

The interior light can be turned off withoutwaiting for 30 seconds by inserting the keyinto the ignition, then turning to the ‘‘ACC’’position or by locking the doors.

Releasing the trunk lid

1. Push the trunk lid release button for longerthan 0.5 seconds.

2. The trunk lid will open.

The trunk will not open with the trunklid release cancel switch turned to OFF.(See ‘‘Trunk lid lock’’ for details.)

Using the panic alarm

If you are near your vehicle and feel threat-ened, you may activate the alarm to callattention as follows:

1. Push the panic alarm button on the remotecontroller.

2. The theft warning alarm and headlight willstay on for 30 seconds.

3. The alarm will stop when any of the keyfunctions are used except the panic alarmbutton.

BATTERY REPLACEMENT

Replace the battery as follows:

SIP0086


2-7

Z 96.12.20/ X

1. Open the lid using a suitable tool.

2. Replace the battery with a new one.Recommended battery: CR2025 or equiva-lent

3. Close the lid securely.

4. Press the key button two or three times tocheck its operation.

If the battery is removed for any reasonother than replacement, perform step 4above.

O An improperly disposed battery canhurt the environment. Always con-firm local regulations for battery dis-posal.

O The remote controller is water-proof; however, if it does get wet,immediately wipe completely dry.

O The operational range of the remotecontroller extends to approximately33 ft (10 m) from the vehicle.

This range may vary with conditions.

FCC Notice:

Changes or modifications not expresslyapproved by the manufacturer compli-ance could void the user’s authority tooperate the equipment.This device complies with Part 15 of theFCC Rules and RSS-210 of IndustryCanada. Operation is subject to thefollowing two conditions: (1) This de-vice may not cause harmful interfer-ence, and (2) this device must acceptany interference received, including in-terference that may cause undesiredoperation of the device.


2-8

Z 96.12.20/ X

HOOD RELEASE

1. Pull the hood lock release handle locatedbelow the instrument panel; the hood willthen spring up slightly.

2. Pull the lever at the front of the hood withyour fingertips and raise the hood.

3. When closing the hood, slowly close thehood and make sure it locks into place.

WARNING

O Make sure the hood is completelyclosed and latched before driv-ing. Failure to do so could causethe hood to fly open and result inan accident.

O If you see steam or smoke coming

from the engine compartment, toavoid injury, do not open thehood.

SIP0095


2-9

Z 96.12.20/ X

GLOVE BOX LOCK

When locking or unlocking the glove box, usethe master key and wallet key.

The glove box may be opened by pulling thehandle.

CAUTION

Keep the glove box lid closed whiledriving to help prevent injury in anaccident or a sudden stop.

TRUNK LID LOCK

Trunk lid release switch opera-tion

The trunk lid release switch is located underthe driver’s armrest.

To open the trunk lid, pull the release switch.To close, push the trunk lid down securely.

SIP0096

SIP0097


2-10

Z 96.12.20/ X

Key operation

To open the trunk lid, turn the key clockwise.To close remove the key, lower and push thetrunk lid down securely.

WARNING

Do not drive with the trunk lid open.This could allow dangerous exhaustgases to be drawn into the vehicle.See ‘‘Exhaust gas’’ in the ‘‘Starting

and driving’’ section.

TRUNK LID RELEASE CAN-CEL SWITCH

When the cancel switch located inside theglove box is ‘‘OFF’’, the trunk lid cannot beopened with the trunk lid release switch or theremote controller. It can be opened only withthe master key or wallet key.

FUEL FILLER LID LOCK

Opener switch

To open the fuel filler lid, push the openerswitch. To lock, close the fuel filler lidsecurely.

SIP0098

SIP0099

IPD063M


2-11

Z 96.12.20/ X

Pulling opener

Pulling the mechanical opener located in thetrunk room can also open the fuel filler lid.

FUEL FILLER CAP

The fuel filler cap is a screw-on ratchetingtype. Tighten the cap clockwise until ratchet-ing clicks are heard.

WARNING

O Gasoline is extremely flammableand highly explosive under cer-tain conditions. You could beburned or seriously injured if it is

misused or mishandled. Alwaysstop engine and do not smoke orallow open flames or sparks nearthe vehicle when refueling.

O Fuel may be under pressure. Turnthe cap one-half turn and wait forany ‘‘hissing’’ sound to stop, toprevent fuel from spraying outand possible personal injury.Then remove the cap.

O Use only a genuine fuel filler capas a replacement. It has a built-insafety valve needed for properoperation of the fuel system andemission control system. An in-correct cap can result in a seriousmalfunction and possible injury.

SIP0121 SIP0100


2-12

Z 96.12.20/ X

CAUTION

If fuel is spilled on the car body,flush it away with water to avoidpaint damage.

Fuel filler cap holder

Put the fuel filler cap on the cap holder whilerefueling.

SEATS

POWER SEAT

WARNING

O Do not adjust the driver’s seatwhile driving in order that fullattention may be given to thedriving operations.

O Do not leave children unattendedinside the vehicle. They may in-advertently activate switches andcontrols.

Operating tips

O The power seat motor has an auto-resetoverload protection circuit. If the motorstops during operation, wait 30 seconds,then reactivate the switch.

O Do not operate the power seat for a long

period of time when the engine is off. Thiswill discharge the battery.

Forward and backward

Pressing the switch forward or backward willslide the seat forward or backward to thedesired position.

SIP0101

SIP0102


2-13

Z 96.12.20/ X

Reclining

Moving the recline switch forward or back-ward will move the seatback forward or back-ward to the desired position.

WARNING

O Do not ride in a moving vehiclewhen the seatback is reclined.This can be dangerous. The

shoulder belt will not be againstyour body. In an accident youcould be thrown into it and re-ceive neck or other serious inju-ries. You could also slide underthe lap belt and receive serious

SIP0103

SIP0150 SIP0151


2-14

Z 96.12.20/ X

internal injuries.

O For most effective protectionwhen the vehicle is in motion, theseat should be upright. Always sitwell back in the seat and adjustthe seat belt properly. See ‘‘Pre-cautions on seat belt usage’’ laterin this chapter.

Seat lifter

Pull or lower either side of the switch to adjustthe seat cushion to the desired angle andheight.

Lumbar support

Push either side of the switch to adjust theseat lumbar area.

SIP0104 SIP0105


2-15

Z 96.12.20/ X

HEAD RESTRAINTS

Adjust the top of the head restraint level withthe top of your ears.

To raise the head restraint, just pull it up. Tolower, push the lock knob and push the headrestraint down.

WARNING

Head restraints should be adjusted

properly as they may provide signifi-cant protection against injury in anaccident. Do not remove them.Check the adjustment after someoneelse uses the seat.

To adjust the head restraint, push it forward orrearward as shown.

SUPPLEMENTALRESTRAINT SYSTEM

SUPPLEMENTAL AIR BAG,AND (If so equipped) SUPPLE-MENTAL SIDE AIR BAG SYS-TEMS

This Supplemental Restraint System sectioncontains important information concerning thedriver and passenger supplemental air bags,supplemental side air bags and pre-tensionerseat belt.Supplemental air bag system: This sys-tem can help cushion the impact force to theface and chest of the driver and front passen-ger in certain frontal collisions.Supplemental side air bag system: Thissystem can help cushion the impact force tothe chest area of the driver and front passen-ger in certain side impact collisions. Thesupplemental side air bag is designed toinflate on the side where the vehicle isimpacted.

IPD082M

IPD083M


2-16

Z 96.12.20/ X

These supplemental restraint systems are de-signed to supplement the crash protectionprovided by the driver and front passengerseat belts and are not a substitute for them.Seat belts should always be correctly wornand the driver and front passenger seated asuitable distance away from the steeringwheel, instrument panel and front door finish-ers. (See ‘‘Seat belts’’ for instructions andprecautions on seat belt usage.)

When the ignition key is in the ‘‘ON’’ or‘‘START’’ position, the supplementalair bag warning light illuminates forabout 7 seconds and then turns off. Thismeans the system is operational.

WARNING

Supplemental air bag equippedmodels:O The supplemental air bags ordi-

narily will not inflate in the event

of a side impact, rear impact, rollover, or lower severity frontalcollision. Always wear your seatbelts to help reduce the risk orseverity of injury in various kindsof accidents.

SIP0188 SIP0189


2-17

Z 96.12.20/ X

O The seat belts and the supple-mental air bags are most effec-tive when you are sitting wellback and upright in the seat.Supplemental air bags inflate

with great force. If you are unre-strained, leaning forward, sittingsideways or out of position in anyway, you are at greater risk ofinjury or death in a crash and may

also receive serious or fatal inju-ries from the supplemental airbag if you are up against it whenit inflates. Always sit backagainst the seatback and use theseat belts.

O Keep hands on the outside of thesteering wheel. Placing them in-side the steering wheel rim couldincrease the risk that they areinjured when the supplementalair bag inflates.

SIP0154 SIP0155


2-18

Z 96.12.20/ X

SIP0156 SIP0157 SIP0158


2-19

Z 96.12.20/ X

SIP0159 SIP0160 SIP0161


2-20

Z 96.12.20/ X

WARNING

O Never let children ride unre-strained or extend their hands orface out of the window. Do notattempt to hold them in your lapor arms. Some examples of dan-gerous riding positions are shownin the previous illustrations.

O Children may be severely injuredor killed when the supplementalair bag or supplemental side airbag inflates if they are not prop-erly restrained.

O Also never install a rear-facingchild restraint in the front seat.An inflating supplemental air bagcould seriously injure or kill yourchild. See ‘‘Child restraints for

infants and small children’’ fordetails.

WARNING

Supplemental side air bag equippedmodels:O The supplemental side air bag

SIP0199

SIP0200


2-21

Z 96.12.20/ X

ordinarily will not inflate in theevent of a frontal impact, rearimpact or lower severity side col-lision. Always wear your seatbelts to help reduce the risk orseverity of injury in various kindsof accidents.

O The seat belts and the supple-mental side air bag are mosteffective when you are sittingwell back and upright in the seat.Supplemental side air bag in-flates with great force. Do notallow anyone to place their hand,leg or face near the supplementalside air bag on the side of theseatback of the front seat. Do notallow anyone sitting in the frontseat to extend their hand out ofthe window or lean against thedoor.

When sitting in the rear seat, donot hold onto the seatback of thefront seat. If the supplementalside air bag inflates, the occupantmay be seriously injured. Be es-pecially careful with children,who should always be properlyrestrained.

O Do not use seat covers on thefront seatbacks. They may inter-fere with supplemental side airbag inflation.


2-22

Z 96.12.20/ X

Supplemental air bag equipped mod-els: The driver supplemental air bag islocated in the center of the steering wheel; thefront passenger supplemental air bag ismounted in the dashboard above the glovebox. The supplemental air bags are designedto inflate in higher severity frontal collisions,although they may inflate if the forces in

another type of collision are similar to those ofa higher severity frontal impact. They may notinflate in certain frontal collisions. Vehicledamage (or lack of it) is not always anindication of proper supplemental air bagoperation.

Supplemental side air bag equippedmodels: The supplemental side air bags are

located in the outside of the seatback of thefront seats. The supplemental side air bag (onthe driver or front passenger seat) is designedto inflate in higher severity side collisions,although it may inflate if the forces in anothertype of collision are similar to those of ahigher severity side impact. It is designed toinflate on the side where the vehicle isimpacted. It may not inflate in certain sidecollisions. Vehicle damage (or lack of it) isnot always an indication of proper supplemen-tal side air bag operation.

When the supplemental air bag or supplemen-tal side air bag inflates, a fairly loud noise maybe heard, followed by release of smoke. Thissmoke is not harmful and does not indicate afire, but care should be taken not to inflate it,as it may cause irritation and choking. Thosewith a history of breathing trouble should getfresh air promptly.

Supplemental air bags and supplemental sideair bags, along with the use of seat belts, helpto cushion the impact force on the face andchest of the front occupants. They can helpsave lives and reduce serious injuries. How-

SIP0201


2-23

Z 96.12.20/ X

ever, an inflating supplemental air bag maycause facial abrasions or other injuries.Supplemental air bags and supplemental sideair bags do not provide restraint to the lowerbody.

The seat belts should be correctly worn andthe driver and passenger seated upright as faras practical away from the steering wheel ordash board. Since the supplemental air bagsand supplemental side air bags inflate quicklyin order to help protect the front occupants,the force of the supplemental air bag orsupplemental side air bag inflating can in-crease the risk of injury if the occupant is tooclose to or is against the supplemental air bagmodule or supplemental side air bag moduleduring inflation. The supplemental air bag orsupplemental side air bag will deflate quicklyafter the collision is over.

When the ignition key is in the ‘‘ON’’ or‘‘START’’ position, the supplementalair bag warning light illuminates forabout 7 seconds and then turns off. Thismeans the system is operational.

WARNING

● Supplemental air bag equippedmodels: Do not place any objectson the steering wheel pad or onthe instrument panel. Also, do notplace any objects between anyoccupant and the steering wheelor instrument panel. Such objectsmay become dangerous projec-tiles and cause injury if thesupplemental air bag inflates.

● Supplemental side air bagequipped models: Do not placeany objects near the seatback ofthe front seats. Also, do not placeany objects (an umbrella, bag,etc.) between the front door fin-isher and the front seat. Such

objects may become dangerousprojectiles and cause injury if thesupplemental side air bag in-flates.

● Right after inflation, severalsupplemental air bag and supple-mental side air bag componentswill be hot. Do not touch them;you may severely burn yourself.

● No unauthorized changes shouldbe made to any components orwiring of the supplemental airbags or supplemental side airbags. This is to prevent acciden-tal inflation of the supplementalair bag or supplemental side airbag or damage to these systems.

● Do not make unauthorizedchanges to your vehicle’s electri-


2-24

Z 97.1.7/ X

cal system, suspension system,front end structure or side panel.This could affect proper operationof the supplemental air bags orsupplemental side air bags.

O Tampering with these supple-mental systems may result in se-rious personal injury. Tamperingincludes changes to the steeringwheel and the instrument panel,and the front seats assembly byplacing material over the steeringwheel pad, above the dashboardand near the seatback of the frontseat, or by installing additionaltrim material around thesesupplemental systems.

O Work around and on the supple-mental air bags or supplementalside air bags should be done by

an authorized INFINITI dealer. In-stallation of electrical equipmentshould also be done by an autho-rized INFINITI dealer. The SRSwiring harnesses* should not bemodified or disconnected. Unau-thorized electrical test equipmentand probing devices should notbe used on these supplementalsystems.

* The SRS wiring harnesses arecovered with yellow insulation ei-ther just before the harness con-nectors or for the complete har-ness, for easy identification.

When selling your vehicle, we request that youinform the buyer about the supplemental airbags and supplemental side air bags andguide the buyer to the appropriate sections inthis Owner’s Manual.

Pre-tensioner seat belt system

The front seat pre-tensioner seat belt systemactivates in conjunction with the supplementalair bag. Working with the seat belt retractor, ithelps tighten the seat belt the instant thevehicle becomes involved in certain types ofcollisions, thereby restraining seat occupants.

The pre-tensioner is encased with the seatbelt’s retractor. These seat belts are used thesame as conventional seat belts.

When the pre-tensioner seat belt activates,smoke is released and a loud noise may beheard. The smoke is not harmful, but careshould be taken not to inhale it as it maycause irritation and choking.

WARNING

O The pre-tensioner seat belt can-not be reused after activation. It


2-25

Z 96.12.20/ X

must be replaced together withthe retractor as a unit.

O If the vehicle becomes involved ina frontal collision but the pre-tensioner is not activated, be sureto have the pre-tensioner systemchecked and, if necessary, re-placed by your INFINITI dealer.

If any abnormality occurs in the pre-tensionersystem, the seat belt warning light will flashintermittently after the ignition key is turned tothe ‘‘ON’’ or ‘‘START’’ position. In this case,the pre-tensioner seat belt will not functionproperly.

When selling your vehicle, we request that youinform the buyer about the pre-tensioner seatbelt system and guide the buyer to theappropriate sections in this Owner’s Manual.

WARNING

O No unauthorized changes shouldbe made to any components orwiring of the pre-tensioner seatbelt system. This is to preventaccidental retraction of the pre-tensioner seat belt or damage tothe pre-tensioner seat belt opera-tion. Tampering with the pre-tensioner seat belt system mayresult in serious personal injury.

O Work around and on the pre-tensioner system should be doneby an authorized INFINITI dealer.Installation of electrical equip-ment should also be done by anauthorized INFINITI dealer. Unau-thorized electrical test equipmentand probing devices should not

be used on the pre-tensioner seatbelt system.

O If you need to dispose of thepre-tensioner or scrap the ve-hicle, contact an authorizedINFINITI dealer. Correct pre-tensioner disposal proceduresare set forth in the appropriateINFINITI Service Manual. Incor-rect disposal procedures couldcause personal injury.


2-26

Z 96.12.20/ X

WARNING LABELS

The warning labels about the supplemental airbags are placed in the vehicle.

SUPPLEMENTAL AIR BAGWARNING LIGHT

The supplemental air bag warning light, dis-playing ‘‘AIR BAG’’ in the instrument panel,monitors the circuits of the supplemental airbag and supplemental side air bag systems.The circuits monitored by the supplemental airbag warning light are the diagnosis sensorunit, satellite sensors, supplemental air bagmodules, supplemental side air bag modulesand all related wiring.

When the ignition key is in the ‘‘ON’’ or

SIP0202

SIP0108


2-27

Z 96.12.20/ X

‘‘START’’ position, the supplemental air bagwarning light illuminates for about 7 secondsand then turns off. This means the system isoperational.

If any of the following conditions occur, thesupplemental air bag and supplemental sideair bag systems need servicing:

1. The supplemental air bag light goes offwithin 7 seconds.

2. The supplemental air bag light flashesintermittently or remains on (after 7 sec-onds).

3. The supplemental air bag light does notcome on at all.

Under these conditions, the supplemental airbags or supplemental side air bags may notoperate properly. It must be checked andrepaired. Take your vehicle to the nearestauthorized INFINITI dealer.

WARNING

If the supplemental air bag warninglight is on, it could mean that thesupplemental air bags or supple-mental side air bags will not operatein an accident.

Repair and replacement proce-dure

The supplemental air bags or supplementalside air bags are designed to inflate on aone-time-only basis. As a reminder, unless itis damaged, the supplemental air bag lightwill remain illuminated after inflation hasoccurred. Repair and replacement of thesesupplemental systems should be done only byauthorized INFINITI dealers.

To ensure long-term functioning, thesesystems must be inspected 10 yearsafter the date of manufacture noted on

the certification label located on thedriver side center pillar.

When maintenance work is required on thevehicle, the supplemental air bags, supple-mental side air bags and related parts shouldbe pointed out to the person conducting themaintenance. The ignition key should alwaysbe in the ‘‘LOCK’’ position when workingunder the hood or inside the vehicle.

WARNING

● Once the supplemental air bag orsupplemental side air bag hasinflated, the supplemental air bagmodule or supplemental side airbag module will not functionagain and must be replaced. Thesupplemental air bag module orsupplemental side air bag mod-ule should be replaced by anauthorized INFINITI dealer. The


2-28

Z 97.1.7/ X

supplemental air bag module orsupplemental side air bag mod-ule cannot be repaired.

O The supplemental air bag andsupplemental side air bag sys-tems should be inspected by anauthorized INFINITI dealer if thereis any damage to the front end orside portion of the vehicle.

O If you need to dispose of thesesupplemental systems or scrapthe vehicle, contact an authorizedINFINITI dealer.

Correct disposal procedures areset forth in the appropriateINFINITI Service Manual. Incor-rect disposal procedures couldcause personal injury.

SEAT BELTS

PRECAUTIONS ON SEATBELT USAGE

Your chances of being injured in an accidentand/or the severity of injury or killed may begreatly reduced if you are wearing your seatbelt and it is properly adjusted. INFINITIstrongly encourages you and all of yourpassengers to buckle up every time you drive,even if your seating position includes asupplemental air bag.

Some states, provinces or territoriesrequire that seat belts be worn at alltimes when a vehicle is being driven.

WARNING

O Every person who drives or ridesin this vehicle should wear a seatbelt at all times. Children should

SIP0190


2-29

Z 96.12.20/ X

be properly restrained and, if ap-propriate in a child restraint.

O The belt should be adjusted prop-erly and to a snug fit. Failure todo so may reduce the effective-

ness of the entire restraint systemand increase the chance or sever-ity of injury in an accident. Seri-ous injury or death can occur ifthe seat belt is not worn properly.

O Always route the shoulder beltover your shoulder and acrossyour chest. Never run the beltbehind your back, under your armor across your neck. The beltshould be away from your faceand neck, but not falling off yourshoulder.

O Position the lap belt as low andsnug as possible AROUND THEHIPS, NOT THE WAIST. A lap beltworn too high could increase therisk of internal injuries in an ac-cident.

O Be sure the seat belt tongue issecurely fastened to the properbuckle.

O Do not wear the belt inside out ortwisted. Doing so may reduce itseffectiveness.

SIP0163 SIP0164


2-30

Z 96.12.20/ X

O Do not allow more than one per-son to use the same belt.

O Never carry more people in thevehicle than there are seat belts.

O If the seat belt warning lampglows continuously while the ig-nition is turned ‘‘ON’’ with alldoors closed and all seat beltsfastened, it may indicate a mal-function in the system. Have thesystem checked by your INFINITIdealer.

O Once the pre-tensioner has acti-vated, it cannot be reused andmust be replaced together withthe retractor. See your INFINITIdealer.

O All seat belt assemblies includingretractors and attaching hardware

should be inspected after any col-lision by your INFINITI dealer.INFINITI recommends that allseat belt assemblies in use dur-ing a collision be replaced unlessthe collision was minor and thebelts show no damage and con-tinue to operate properly. Seatbelt assemblies not in use duringa collision should also be in-spected and replaced if eitherdamage or improper operation isnoted.

Child safety

Children need adults to help protectthem.

WARNING

Infants and children need specialprotection. The vehicle’s seat beltsmay not fit them properly. Theshoulder belt may come too close tothe face or neck. The lap belt maynot fit over their small hip bones. Inan accident, an improperly fittingseat belt could cause serious or fatalinjury. Always use appropriate childrestraints.

All U.S. states and provinces of Canadarequire the use of approved child restraints forinfants and small children. (See ‘‘Child re-


2-31

Z 96.12.20/ X

straints for infants and small children’’ later inthis section.)

In addition, there are many types of childrestraints available for larger children whichshould be used for maximum protection.

Infant or small child:

INFINITI recommends that infants or smallchildren be placed in child restraints thatcomply with Federal Motor Vehicle SafetyStandards or Canadian Motor Vehicle SafetyStandards. You should choose a child re-straint which fits your vehicle and alwaysfollow the manufacturer’s instructions for in-stallation and use.

Children:

Children who are too large for child restraintsshould be seated and restrained by the seatbelts which are provided.

INFINITI recommends that children sit in therear seat if available. According to accident

statistics, children are safer when properlyrestrained in the rear seat than in the frontseat.

If the child’s seating position has a shoulderbelt that fits close to the face or neck, the useof a booster seat (commercially available) mayhelp overcome this. The booster seat shouldraise the child so that the shoulder belt isproperly positioned across the top, middleportion of the shoulder and the lap belt is lowon the hips. The booster seat should fit thevehicle seat and have a label certifying that itcomplies with Federal Motor Vehicle SafetyStandards or Canadian Motor Vehicle SafetyStandards. Once the child has grown so theshoulder belt is no longer on or near the faceand neck, use the shoulder belt without thebooster seat.

WARNING

Never let a child stand or kneel onany seat and do not allow a child inthe cargo areas while the vehicle ismoving. The child could be seriouslyinjured or killed in an accident.

Pregnant women

INFINITI recommends that pregnant womenuse seat belts. Contact your doctor for specificrecommendations. The lap belt should beworn snug and positioned as low as possiblearound the hips, not the waist.

Injured persons

INFINITI recommends that injured personsuse seat belts, depending on the injury. Checkwith your doctor for specific recommenda-tions.


2-32

Z 96.12.20/ X

3-POINT TYPE WITH RETRAC-TOR

WARNING

Every person who drives or rides inthis vehicle should wear a seat beltat all times.

Fastening the belts

1. Adjust the seat.

WARNING

O Do not ride in a moving vehicle

when the seatback is reclined.This can be dangerous. Theshoulder belt will not be againstyour body. In an accident youcould be thrown into it and re-ceive neck or other serious inju-ries. You could also slide underthe lap belt and receive seriousinternal injuries.

O For most effective protectionwhen the vehicle is in motion, theseat should be upright. Always sitwell back in the seat and adjustthe seat belt properly.

2. Slowly pull the seat belt out of the retractorand insert the tongue into the buckle untilit snaps.

SIP0182


2-33

Z 96.12.20/ X

The retractor is designed to lock duringa sudden stop or on impact. A slowpulling motion will permit the belt tomove, and allow you some freedom ofmovement in the seat.

3. Position the lap belt portion low andsnug on the hips as shown.

4. Pull the shoulder belt portion toward theretractor to take up extra slack.

The front passenger side seat belt and rear3-point seat belts have a cinching mechanismfor child seat installation. It is referred to as

the automatic locking mode. When the cinch-ing mechanism is activated the seat beltcannot be withdrawn again until the seat belttongue is detached from the buckle and fullyretracted. Refer to ‘‘Child Restraint Systems forInfants and Small Children’’ later in thissection for more information.

The automatic locking mode should beused only for child seat installation.During normal seat belt use by anoccupant, the locking mode should notbe activated. If it is activated it maycause uncomfortable seat belt tension.

Unfastening the belts

To unfasten the belt, press the button on thebuckle. The seat belt will automatically retract.

SIP0183 SIP0184


2-34

Z 96.12.20/ X

Checking seat belt operation(3-point type with retractor)

Your seat belt retractors are designed to lockbelt movement by two separate methods:

1) When the belt is pulled quickly from theretractor.

2) When the vehicle slows down rapidly.

You can check their operation as follows:

O Grasp the shoulder belt and pull quicklyforward. The retractor should lock andrestrict further belt movement.

If the retractor does not lock during this checkor if you have any question about beltoperation, see your INFINITI dealer.

Shoulder belt height adjustment(For front seats)

The shoulder belt anchor height should beadjusted to the position best for you. (See‘‘Precautions on seat belt usage’’.)

To adjust, squeeze the release buttons, andthen move it to the desired position, so thatthe belt passes over the center of the shoul-der. The belt should be away from your faceand neck, but not falling off of your shoulder.

WARNING

After adjustment, release the buttonand check that it does not move upand down to make sure the shoulder

belt anchor is securely fixed in po-sition.

2-POINT TYPE WITHOUTRETRACTOR (Rear center lapbelt)Selecting correct set of belts

SIP0074A

SIP0088


2-35

Z 96.12.20/ X

The center seat belt buckle and tongue areidentified by the ‘‘CENTER’’ mark. The centerseat belt tongue can be fastened only into thecenter seat belt buckle.

Fastening the belts

1. Insert the tongue into the buckle markedCENTER until it snaps.

2. To lengthen, hold the tongue at a rightangle to the belt and pull on the belt.

To shorten, pull the free end of the beltaway from the tongue, then pull the beltclip to take up the slack.

3. Position the lap belt low and snug onthe hips as illustrated.

Unfastening the belts

To unfasten the belt, press the button on thebuckle.SIP0075

SIP0119 SIP0077


2-36

Z 96.12.20/ X

SEAT BELT EXTENDERS

If, because of body size or driving position, itis not possible to properly fit the lap-shoulderbelt and fasten it, an extender is availablewhich is compatible with the installed seatbelts. The extender adds approximately 8inches (200 mm) of length and may be usedfor either the driver or front passenger seatingposition. See your INFINITI dealer for assis-tance if the extender is required.

WARNING

O Only INFINITI belt extenders,made by the same companywhich made the original equip-ment belts, should be used withthe INFINITI belts.

O Persons who can use the standardseat belt should not use an ex-

tender. Such unnecessary usecould result in serious personalinjury in the event of an accident.

SEAT BELT MAINTENANCE

O To clean the seat belt webbings,apply a mild soap solution or any non-caustic solution recommended for gentlycleaning cloth upholstery or carpets. Thenbrush it, wipe with a cloth and allow it todry in the shade. Do not allow the seatbelts to retract until they are completelydry.

O If dirt builds up in the shoulder belt guideof the seat belt anchors, the seat belts mayretract slowly. Wipe the shoulder beltguide with a clean, dry cloth.

O Periodically check to see that theseat belt and the metal componentssuch as buckles, tongues, retractors, flex-

ible wires and anchors work properly. Ifloose parts, deterioration, cuts or otherdamage on the webbing are found, theentire belt assembly should be replaced.

CHILD RESTRAINTS FORINFANTS AND SMALL CHIL-DREN

WARNING

O Infants and small children shouldalways be placed in an appropri-ate child restraint while riding inthe vehicle. Failure to use a childrestraint can result in serious in-jury or death.

O Children and infants should neverbe carried on your lap. It is notpossible for even the strongestadult to resist the forces of a


2-37

Z 96.12.20/ X

severe accident. The child couldbe crushed between the adult andparts of the vehicle. Also, do notput the same seat belt aroundboth your child and yourself.

O INFINITI recommends that thechild restraint be installed in therear seat. According to accidentstatistics, children are safer whenproperly restrained in the rearseat than in the front seat.

O An improperly installed child re-straint could lead to serious in-jury or death in an accident.

In general, child restraints are designed to beinstalled with a lap belt or the lap portion of athree-point type seat belt.

Child restraints specially designed for infantsand small children are offered by several

manufacturers. When selecting any child re-straint system, keep the following points inmind:

1) Choose only a restraint with a label certi-fying that it complies with Federal MotorVehicle Safety Standard 213 or CanadianMotor Vehicle Safety Standard 213.

2) Check the child restraint in your vehicle tobe sure it is compatible with the vehicle’sseat and seat belt system. Choose a childrestraint that meets the guidelines of theSociety of Automotive Engineers recom-mended practice J1819 for child restraintinstallation.

3) If the child restraint is compatible withyour vehicle, place your child in the childrestraint and check the various adjust-ments to be sure the child restraint iscompatible with your child. Always followall recommended procedures.

All U.S. states and provinces of Canada

require that infants and small childrenbe restrained in approved child re-straint systems at all times while thevehicle is being operated.

WARNING

O Never install a rear-facing childrestraint in the front seat. Aninflating supplemental air bagcould seriously injure or kill yourchild. A rear-facing child restraintmust only be used in the rearseat. See ‘‘Installation on frontpassenger seat’’ for details.

O Improper use of a child restraintcan result in increased injuriesfor both the infant or child andother occupants in the vehicle.

O Follow all of the child restraint


2-38

Z 96.12.20/ X

manufacturer’s instructions forinstallation and use. When pur-chasing a child restraint, be sureto select one which will fit yourchild and vehicle. It may not bepossible to properly install sometypes of child restraints in yourvehicle.

O If the child restraint is not an-chored properly, the risk of achild being injured in a collisionor a sudden stop greatly in-creases.

O Adjustable seatbacks should bepositioned to fit the child re-straint, but as upright as pos-sible.

O After attaching the child restraint,test the restraint before you place

the child in it. Tilt the restraintfrom side to side. Try to tug itforward and check to see if thebelt holds it in place. If the re-straint is not secure, tighten thebelt as necessary, or put the re-straint in another seat and test itagain.

O For a front facing child restraint,if the seat position where it isinstalled has a 3-point typelap/shoulder belt, check to makesure the shoulder belt does not goin front of the child’s face or neck.If it does, put the shoulder beltbehind the child restraint.

O When your child restraint is not inuse, store it in the trunk or keep itsecured with a seat belt to pre-vent it from being thrown around

in case of a sudden stop or acci-dent.

CAUTION

Remember that a child restraint leftin a closed vehicle can become veryhot. Check the seating surface andbuckles before placing your child inthe child restraint.

INSTALLATION ON REARSEAT

Center lap belt

When you install a child restraint in a rearcenter seat, follow these steps:

1. Position the child restraint on the seat asillustrated. It can be placed in a forwardfacing or rear facing direction, depending


2-39

Z 96.12.20/ X

on the size of the child. Always follow therestraint manufacturer’s instructions.

2. Route the seat belt tongue through thechild restraint and insert it into the buckleuntil you hear and feel the latch engage. Besure to follow the child restraintmanufacturer’s instructions for belt rout-ing.

3. Remove all slack in the lap belt for a verytight fit by pulling forcefully on the lap beltadjustment.

4. Before placing the child in the childrestraint, use force to tilt the child restraintfrom side to side, and tug it forward tomake sure that it is securely held in place.

5. If it is not secure, try to tighten the beltagain, or put the restraint in another seat.

6. Check to make sure the child restraint isproperly secured prior to each use.

Outboard shoulder/lap belt

WARNING

O The 3-point belt on your vehicle isequipped with a locking moderetractor which must be usedwhen installing a child restraint.

O Failure to do so will result in thechild restraint not being properlysecured. It could tip over or oth-erwise be unsecured and causeinjury to the child in a suddenstop or collision.

When you install a child restraint in a rearoutboard seat, follow these steps:

1. Position the child restraint on the seat. Itcan be placed in a forward facing or rearfacing direction, depending on the size ofthe child. Always follow the restraintIPD123M


2-40

Z 96.12.20/ X

manufacturer’s instructions.

2. Route the seat belt tongue through thechild restraint and insert it into the buckleuntil you hear and feel the latch engage. Besure to follow the child restraint manufac-turer’s instructions for belt routing.

3. Pull on the shoulder belt until all of thebelt is fully extended and a click is heard.At this time, the belt retractor is in theautomatic locking mode (child restraintmode). It will revert back to ‘‘emergencylocking’’ when the belt is fully retracted.

4. Allow the belt to retract. A clicking soundwill be heard as the belt retracts. Thisindicates that the retractor is in the auto-matic locking mode. Pull up on the belt toremove any slack in the belt.


6. Check that the retractor is in the automaticlocking mode by trying to pull more beltout of the retractor. If you cannot pull anymore belt webbing out of the retractor, thebelt is in the automatic locking mode.

7. Check to make sure that the child restraintis properly secured prior to each use. If thelap belt is not locked, repeat steps 3through 6.

After the child restraint is removed and theseat belt is allowed to wind back into theretractor, the automatic locking mode (childrestraint mode) is canceled; the seat belt maybe used as normal and will only lock during asudden stop or impact.

SIP0079


2-41

Z 97.3.12/ X

Top strap child restraint

If your child restraint has a top strap, installthe anchor bracket to the provided anchorpoint. Anchor bracket hardware must be in-stalled. The top strap anchor bracket hardwareis available through your INFINITI dealer.

Part #88894-89900Secure the child restraint with the centerlap belt or the lap portion of an outboard3-point belt and latch the top strap hookonto the appropriate anchor bracket. Toinstall the anchor bracket, a metric bolt

of the dimensions listed below must beused.

Bolt diameter: 8.0 mmBolt length: more than 1.18 in (30mm)

Thread pitch: 1.25 mm

The top strap should be secured to theattaching bolt which provides the straightestinstallation of the top strap.

WARNING

Child restraint anchor points are de-signed to withstand only those loadsimposed by correctly fitted child re-straints. Under no circumstances arethey to be used for adult seat belts orharnesses.

Anchor point locations

Anchor points are located under the rearparcel shelf finisher.

When installing a top strap child re-straint on the rear seat for the firsttime, consult your INFINITI dealer fordetails.

IPD087 SIP0109


2-42

Z 96.12.20/ X

INSTALLATION ON FRONTPASSENGER SEAT

WARNING

O Never install a rear-facing childrestraint in the front passengerseat. Supplemental air bags in-flate with great force. A rear-

facing child restraint could bestruck by the supplemental airbag in a crash and could seriouslyinjure or kill your child.

O If you install a forward-facingchild restraint in the front-passenger seat, place the pas-senger seat as far back as pos-sible.

O A child restraint with a top strapshould not be used in the frontpassenger seat.

O The 3-point belt in your vehicle isequipped with a locking moderetractor which must be usedwhen installing a child restraint.

O Failure to use the retractor’s lock-ing mode may result in the childrestraint not being properly se-

SIP0165

SIP0161


2-43

Z 96.12.20/ X

cured. The restraint could tip overor otherwise be unsecured andcause injury to the child in asudden stop or collision.

When you install a child restraint in the frontseat, follow these steps:

1. Position the child restraint on the frontpassenger seat. It should be placed ina forward facing direction only. Movethe seat as far back from the instrumentpanel as possible. Always follow the childrestraint manufacturer’s instructions.Child restraints for infants must beused in the rear-facing direction andtherefore must not be used in thefront seat.

2. Route the seat belt tongue through thechild restraint and insert it into the buckleuntil you hear and feel the latch engage. Besure to follow the child restraint manufac-turer’s instructions for belt routing.

3. Pull on the shoulder belt until all of thebelt is fully extended and a click is heard.

At this time, the belt retractor is in theautomatic locking mode (child restraintmode). (It will revert back to ‘‘emergencylocking’’ when the belt is fully retracted.)

4. Allow the belt to retract. A clicking soundwill be heard as the belt retracts. Thisindicates that the retractor is in the auto-matic locking mode. Pull up on the belt toremove any slack in the belt.


6. Check that the retractor is in the automaticlocking mode by trying to pull more beltout of the retractor. If you cannot pull anymore belt webbing out of the retractor, thebelt is in the automatic locking mode.

7. Check to make sure that the child restraintis properly secured prior to each use. If the

IPD080M


2-44

Z 97.3.12/ X

lap belt is not locked, repeat steps 3through 6.

After the child restraint is removed and theseat belt is allowed to wind back into theretractor, the automatic locking mode (childrestraint mode) is canceled; the seat belt maybe used as normal and will only lock during asudden stop or impact.

AUTOMATIC DRIVEPOSITIONERThis system is designed so that the driver’sseat and steering column will automaticallymove when the driver removes the key fromthe ignition switch, opens the driver’s doorwith the key turned to ‘‘LOCK’’ or ‘‘OFF’’, orturns the key from ‘‘ACC’’ to ‘‘OFF’’ with thedoor open while the automatic transmissionshift lever is in the ‘‘P’’ position. The seat willslide backward and the steering wheel willmove up.

When one of the following conditions is met,

the seat and steering wheel will return to theiroriginal positions:

O When the key is inserted.

O When the door is closed with the keyturned to ‘‘LOCK’’ or ‘‘OFF’’.

O When the key is turned from ‘‘ACC’’ to‘‘ON’’ while the automatic transmissionselector lever is in the ‘‘P’’ position.

Procedure for storing memory

Two positions can be stored in the automaticdrive positioner memory. Follow these pro-cedures to use the memory system.

1. Turn the ignition ‘‘ON’’.

2. Set the automatic transmission shift leverto the ‘‘P’’ position.

3. Adjust the driver’s seat and steering col-umn to the desired positions by manuallyoperating the adjusting switches. (See‘‘Seats’’, ‘‘Tilting steering column’’ in ‘‘Pre-driving checks and adjustments’’.)

During this step, do not turn the ignition toany positions other than ‘‘ON’’.

4. Push the main memory switch (‘‘SET’’)

SIP0110


2-45

Z 96.12.20/ X

and, within 5 seconds, push the memoryswitch ‘‘1’’ or ‘‘2’’.

O The indicator light for the pushed memoryswitch will come on and stay on forapproximately 5 seconds after pushing theswitch. After the indicator light goes off,the selected positions are stored in theselected memory (‘‘1’’ or ‘‘2’’).

Confirming memory storage

O Turn the ignition ‘‘ON’’ and push the mainmemory switch (‘‘SET’’). If the mainmemory has not been stored, the indicatorlight will come on for approximately 0.5seconds. When the memory has stored theposition, the indicator light will stay on forapproximately 5 seconds.

O If the battery cable is disconnected, or ifthe fuse blows, the memory will be can-celed. In such a case, reset the desiredpositions using the following procedures.

1. Open and close the driver’s door more

than two times with the ignition key in the‘‘LOCK’’ position.

2. Reset the desired position using the pre-vious procedure.

Selecting the memorized posi-tion

O When the ignition is ‘‘ON’’ and memoryswitch ‘‘1’’ or ‘‘2’’ is pushed, the driver’sseat and steering column, will move to thememorized position.

O When memory switch ‘‘1’’ or ‘‘2’’ is pushedwith the driver’s door open and then thekey inserted into the ignition switch withinapproximately 1 minute, the driver’s seatand steering column will move to thememorized position.

The automatic drive positioner system will notwork or will stop operating under the follow-ing conditions:

O When the vehicle speed is above 4 MPH (7km/h).

O When any two or more of the memoryswitches are simultaneously pressed whilethe automatic drive positioner is operating.

O When the adjusting switch for the driver’sseat or the steering column is turned onwhile the automatic drive positioner isoperating.

O When the cancel switch is turned on.

If the seat memory indicator lights blinkwhile the engine is running, it mayindicate that there is something wrongwith the system. See your INFINITIdealer for repair.


2-46

Z 96.12.20/ X

Cancel switch

O The cancel switch located on the steeringcolumn is ON when it is in ( ).

The cancel switch is OFF when it is out( ).

O When the cancel switch is turned on, theautomatic drive positioner system will notfunction.

When the switch is turned off, the systemwill function.

TILTING STEERING COL-UMN

Tilt operation

Push the lever to adjust the steering wheel upor down to the desired position.

When the steering column is at the upperextent of its adjustment, pushing the manualswitch upward will not move the steeringcolumn further. After releasing the switch, thesteering wheel may lower slightly. This is nota malfunction.

Jump up operation

The automatic drive positioner system willmake the steering wheel jump upautomatically. This lets the driver get into andout of the seat more easily.

WARNING

Do not adjust the steering wheelwhile driving. You could lose controlof your vehicle and cause an acci-dent.

SIP0111

SIP0112


2-47

Z 96.12.20/ X

TELESCOPIC STEERINGCOLUMN

Push the lever to adjust the steering wheelforward or backward to the desired position.

OUTSIDE MIRROR RE-MOTE CONTROL

The outside mirror will operate only when theignition switch is in the ‘‘ACC’’ or ‘‘ON’’position.

Push the switch to the ‘‘L’’ or ‘‘R’’ side to selectthe right or left side mirror, then adjust usingthe control button.

These mirrors will be heated when the rearwindow defogger switch is operated.

WARNING

Objects viewed in the outside mirroron the passenger side are closerthan they appear. Be careful whenmoving to the right. Using only thismirror could cause an accident. Useinside mirror or glance over yourshoulder to properly judge distancesto other objects.

SIP0113 SIP0114


2-48

Z 96.12.20/ X

FOLDABLE OUTSIDE MIR-RORS

Push the outside mirror backward to fold it.

AUTOMATIC ANTI-DAZZLING INSIDE MIRROR

The automatic anti-dazzling inside mirror op-erates when the ignition key is in the ‘‘ON’’position.

The inside mirror is designed so that itautomatically changes reflection according tothe intensity of the headlight of the followingvehicle.

Normally, use the AUTO position.

AUTO position:

Push the AUTO switch. (The indicator light onthe AUTO switch will come on.)

The mirror reflection ratio changes automati-cally according to external lighting and bright-ness conditions.

DAY position:

Push the DAY switch. (The indicator light onthe DAY switch will come on.)

IPD073M SIP0185


2-49

Z 96.12.20/ X

The mirror reflection ratio is held at a highreflection ratio.

Do not hang any object on the sensor orapply glass cleaner. Doing so will re-duce the sensitivity of the sensor, re-sulting in improper operation.

SUN VISORS

CAUTION

O Do not store the main sun visorbefore storing the sub-sun visor.

O Do not pull the sub-sun visor forc-edly downwards.

1. To block out glare from the front, swingdown the main sun visor.

2. To block glare from the side, remove themain sun visor from the center mount andswing it to the side.

3. Then, to block glare from the front too,swing down the sub-sun visor.

SIP0116


2-50

Z 96.12.20/ X

3 HEATER, AIR CONDITIONER AND AUDIO SYSTEM

Ventilator .................................................... 3-2Automatic air conditioner ........................... 3-3Audio system ............................................. 3-6CB radio or car phone .............................. 3-18

Z 96.12.20/ X

VENTILATOR

Open or close, and adjust the air flow direc-tion of ventilators.

SIH0032

SIH0018

SIH0033

HEATER, AIR CONDITIONER AND AUDIO SYSTEM

3-2

Z 96.12.20/ X

AUTOMATIC AIR CONDITIONER

SIH0027


3-3

Z 96.12.20/ X

Start the engine and operate the controls toactivate the air conditioner.

WARNING

O The air conditioner cooling func-tion operates only when the en-gine is running.

O Do not leave children, unreliableadults, or pets alone in your ve-hicle. On hot, sunny days, tem-peratures in a closed vehiclecould quickly become highenough to cause severe or possi-bly fatal injuries to people oranimals.

O Do not use the recirculation modefor long periods as it may causethe interior air to become staleand the windows to fog up.

O Positioning of the heater and airconditioner controls should not bedone while driving, in order thatfull attention may be given to thedriving operation.

Cooling and/or dehumidifiedheating mode ‘‘AUTO’’

This mode may be used all year round. Thesystem works automatically to maintain aconstant temperature. Air flow distribution andfan speed are also controlled automatically.

1. Push the ‘‘AUTO’’ switch on. (‘‘AUTO’’ willappear on the display.)

2. Turn the temperature control knob to setthe desired temperature.

O For normal operation, adjust the tempera-ture control knob to about 77°F (25°C).

Heating mode ‘‘ECON’’

Use this mode when you need to heat only.

1. Push the ‘‘ECON’’ (ECONOMY) switch on.(‘‘ECON’’ appears on the display.)


O The temperature of the passenger compart-ment will be maintained automatically. Airflow distribution and fan speed are alsocontrolled automatically.

O Do not set the temperature lower than theoutside air temperature. Otherwise the sys-tem may not work properly.

O If the windows fog up, do not use the‘‘ECON’’ mode.

Dehumidified defrosting‘‘ FRONT’’

1. Push the front defroster ‘‘ FRONT’’switch on. (The indicator light on the


3-4

Z 96.12.20/ X

switch will come on.)


O To remove ice or fog from the outside ofthe windows, push the manual fan controlswitch ‘‘ ’’ and set to the maximumposition.

O As soon as possible after the windshield isclean, push the ‘‘AUTO’’ switch to return tothe auto mode.

O When the front defroster ‘‘ FRONT’’switch is pushed, the air conditioner willautomatically be turned on at outside tem-peratures above 30°F (−1°C) to defrost thewindshield. The air recirculation mode‘‘ ’’ will automatically be turned off.

Outside air is drawn into the passengercompartment to improve defrosting perfor-mance.

Air recirculation switch ‘‘ ’’

Push the air recirculation switch ‘‘ ’’ torecirculate interior air inside the vehicle. Theindicator light on the switch will come on.

Push it again to draw outside air into thepassenger compartment. The indicator will goout.

O The air recirculation switch ‘‘ ’’ cannotbe activated when the air conditioner is inthe front defrosting mode ‘‘ FRONT’’.

Manual fan speed control switch‘‘ ’’

Push the fan control switch ‘‘ ’’ to changethe fan speed manually.

O Push the ‘‘AUTO’’ switch to return toautomatic control of the fan speed.

Manual air flow control switch

Pushing the manual air flow control switchselects the air outlet to provide:

: Air flow from front center, side and rearventilators.

: Air flow from front center, side and rearventilators, and front and rear footoutlets.

: Air flow mainly from front and rear footoutlets.

: Air flow from defroster and front andrear foot outlets.

To turn the system off ‘‘OFF’’

Push the ‘‘OFF’’ switch.

Ambient temperature switch‘‘AMB’’

Push the ambient temperature switch. Theoutside ambient temperature will be displayedfor approximately five seconds.


3-5

Z 96.12.20/ X

Operating tips

O When the engine coolant temperature andoutside air temperature are low, the airflow from the foot outlets may not operatefor 20 to 150 seconds. This is not amalfunction. After the coolant temperaturewarms up, air flow from the foot outletswill operate normally.

The sensor on the instrument panel helpsmaintain a constant temperature. Do not putanything on or around this sensor.

Ventilation air filter

The air conditioning system is equipped witha ventilation air filter which collects dirt,pollen, dust, etc. To make sure air conditionerheats, defogs, and ventilates efficiently, re-place the filter in accordance with the main-tenance schedule in this manual. To replacethe filter, contact your INFINITI dealer.

The filter should be replaced if air flowis extremely decreased or when win-dows fog up easily during operatingheater or air conditioning system.

Servicing air conditioner

The air conditioning system in your INFINITIis charged with a refrigerant designed with theenvironment in mind. This refrigerant willnot harm the earth’s ozone layer. How-ever, special charging equipment and lubri-cant are required when servicing your INFINITIair conditioner. Using improper refrigerants orlubricants will cause severe damage to your

air conditioning system. See ‘‘Air conditioningsystem refrigerant and lubricantrecommendations’’ in the ‘‘Technical and con-sumer informations’’ column in the technicaland consumer information section of thismanual.

Your INFINITI dealer will be able to serviceyour environmentally ‘‘friendly’’ air condition-ing system.

AUDIO SYSTEM

RADIO

Turn the ignition key to ‘‘ACC’’ or ‘‘ON’’ andpress the power on switch to turn on the radio.If you listen to the radio with the engine notrunning, the key should be turned to the‘‘ACC’’ position.

Radio reception is affected by station signalstrength, distance from radio transmitter,buildings, bridges, mountains and other ex-ternal influences. Intermittent changes in re-

IHA017M


3-6

Z 96.12.20/ X

ception quality normally are caused by theseexternal influences.

RADIO RECEPTION

Your INFINITI radio system is equipped withstate-of-the-art electronic circuits to enhanceradio reception. These circuits are designed toextend reception range, and to enhance thequality of that reception.

However there are some general characteris-tics of both FM and AM radio signals that canaffect radio reception quality in a movingvehicle, even when the finest equipment isused. These characteristics are completelynormal in a given reception area, and do notindicate any malfunction in your INFINITIradio system.

Remember that a moving vehicle is not theideal place to listen to a radio. Because of themovement, reception conditions will con-stantly change. Buildings, terrain, signal dis-tance and interference from other vehicles can

work against ideal reception. Described beloware some of the factors that can affect yourradio reception.

FM RADIO RECEPTION

Range: FM range is normally limited to 25 to30 miles (40 to 48 km), with monaural (singlechannel) FM having slightly more range thanstereo FM. External influences may sometimesinterfere with FM station reception even if theFM station is within 25 miles (40 km). Thestrength of the FM signal is directly related tothe distance between the transmitter and

receiver. FM signals follow a line-of-sightpath, exhibiting many of the same character-istics as light. For example they will reflect offobjects.

Fade and drift: As your vehicle moves awayfrom a station transmitter, the signals willtend to fade and/or drift.

Static and flutter: During signal interferencefrom buildings, large hills or due to antennaposition, usually in conjunction with in-creased distance from the station transmitter,static or flutter can be heard. This can bereduced by adjusting the TREBLE controlcounterclockwise to reduce treble response.

Multipath reception: Because of the reflectivecharacteristics of FM signals, direct and re-flected signals reach the receiver at the sametime. The signals may cancel each other,resulting in momentary flutter or loss ofsound.

IHA018M


3-7

Z 96.12.20/ X

AM RADIO RECEPTION

AM signals, because of their low frequency,can ‘‘bend’’ around objects and skip along theground. In addition, the signals can bebounced off the ionosphere and bent back toearth. Because of these characteristics. AMsignals are also subject to interference as theytravel from transmitter to receiver.

Fading: Occurs while the vehicle is passingthrough freeway underpasses or in areas withmany tall buildings. It can also occur forseveral seconds during ionospheric turbu-lence even in areas where no obstacles exist.

Static: Caused by thunderstorms, electricalpower lines, electric signs and even trafficlights.


3-8

Z 96.12.20/ X

AUDIO MAIN OPERATION

SIH0028


3-9

Z 96.12.20/ X

Head unit

The radio has an FM Diversity receptionsystem, which employs two antennas. One isa rod type antenna; the other is an antennaprinted on the window. This system automati-cally switches to the antenna which is receiv-ing less noise.

The tape deck employs an amorphous headwhich allows for improved reproduction ofhigh frequency ranges. Noise is also greatlyreduced by the combined use of the Dolby NR(noise reduction) system. The auto loudnesscircuit enhances the low frequency rangeautomatically in radio reception and tape/CDplayback.

Bose speaker

A large output amplifier featuring a lowdistortion ratio is connected directly to eachspeaker unit to provide increased output andexcellent tonal quality. The equalizing circuitpermits regeneration of forcible base sound.This equalizing circuit permits the soundefficiency to be matched with the interiorconditions of your INFINITI for a selectionbetween ‘‘natural sound’’ and ‘‘high-fidelitysound’’.

Power volume control knob

Turn the ignition key to ‘‘ACC’’ or ‘‘ON’’, thenpush the ‘‘POWER/VOLUME’’ knob while thesystem is off to call up the mode (radio, tapeor CD) which was playing immediately beforethe system was off. When no CD or tape isloaded, the last available mode is called up.While the system is on, pushing the‘‘POWER/VOLUME’’ knob turns the system off.

To turn the radio off, press the POWER/VOLUME knob.

VOL (volume) control knob

Turn the POWER/VOLUME control knob toadjust the volume.


3-10

Z 96.12.20/ X

Adjusting tone quality andspeaker sound balance

To adjust BASS, TREB (treble), BAL (balance)and FADER the control knobs must be re-leased from their stowed positions. Pushingthe knobs once moves them to the releasedposition.

In the released position, the knobs controltone quality. Turn the control knobs to adjustBASS and TREB to the most pleasing level.

From the released position, the knobs must be

pulled out in order to control BAL and FADER.BAL adjusts the sound level between the rightand left speakers, and FADER adjusts thesound level between the front and rear speak-ers.

Once sound quality is set to the desired levels,return the control knobs to the stowed posi-tion by pushing them in completely andreleasing.

RADIO OPERATION

FMzAM button

Pushing the FMzAM button will change theband FM1, FM2 or AM.

O When FMzAM button is pushed while theignition switch is at ‘‘ACC’’ or ‘‘ON’’, theradio will come on at the station lastplayed.

O The last station played will also come onwhen the power knob is turned to ON.

O If a compact disc or tape is playing whenthe FMzAM button is turned to ON, thecompact disc or tape will automatically beturned off and the last radio station playedwill come on.

TUNE button

Use these buttons for manual tuning. To movequickly through the channels, hold either ofthe tuning buttons down for more than 0.5seconds.

SIH0034


3-11

Z 96.12.20/ X

WARNING

The radio should not be tuned whiledriving in order that full attentionmay be given to the driving opera-tion.

SEEK/SCANbuttons

Use these buttons for SEEK or SCAN tuning.To change from one station to the next, holdeither of the buttons down for less than 1.5seconds.

If a button is held down for more than 1.5seconds, the ‘‘SCAN’’ indication lights up andSCAN tuning begins from low to high fre-quencies and stops at each broadcastingstation for five seconds. Pushing the buttonagain during this five second period will stopSCAN tuning and the radio will remain tunedin that station.

Station memory operations

Twelve stations can be set for the FM band(FM1 and FM2).

Six stations can be set for the AM band.

1. Tune to the desired station using ‘‘SEEK’’or ‘‘TUNE’’ button.

2. Push the desired select button for morethan 1.5 seconds. (For example in thediagram ch2 is to be memorized. The radiomutes when the select button is pushed.)

3. The indicator, ‘‘ch2’’ will then come on andthe radio will resume. Memorizing is nowcomplete.

4. Other buttons can be set in the samemanner.

If the battery cable is disconnected, or if thefuse blows, the radio memory will be can-celed. In that case, reset the desired stations.

SIH0031


3-12

Z 96.12.20/ X

CASSETTE TAPE PLAYER OP-ERATION

Turn the ignition key to ‘‘ACC’’ or ‘‘ON’’, thenlightly insert the cassette tape into the tapedoor. The cassette tape will be automaticallypulled into the player.

The radio or CD will turn off (If it is on) andthe cassette tape will begin to play.

CAUTION

Do not force the cassette tape intothe tape door.

This could cause player damage.

If the system is turned off by pushing thePOWER/VOLUME knob with the cassette tapestill in the player, the tape will resume playingwhen the POWER/VOLUME knob is pushedagain.

‘‘TAPE’’ button

O When this button is pushed with thesystem turned off and a tape loaded, thesystem will come on and the tape will play.

O When this button is pushed with either theradio or compact disc turned on and thetape loaded, the compact disc or the radiowill automatically be turned off and thetape will play.

While the tape is playing, pushing the TAPEbutton stops the tape. Pushing the buttonagain allows the tape to play.

‘‘FF’’ (fast forward), ‘‘REW’’ (re-wind) button

Push the FF (fast forward) button to fastforward the tape. To rewind the tape, push theREW (rewind) button. Either the indicator light‘‘ ’’, ‘‘ ’’, ‘‘ ’’ or ‘‘ ’’ willcome on when the FF or REW function isstarted.

‘‘APS (Automatic ProgramSearch) FF’’, ‘‘APS REW’’button

When the ‘‘APS FF’’ button is pushed while thetape is being played, the next program willstart to play from the beginning. Push the‘‘APS FF’’ button several times to skip throughprograms. The tape will advance the numberof times the button is pushed (up to 9programs).

When the ‘‘APS REW’’ button is pushed once,the program being played starts over from thebeginning. Push several times to fast rewindprograms. The tape will go back the number oftimes the button is pushed. Either the indica-tor light ‘‘ ’’, ‘‘ ’’, ‘‘ ’’ or‘‘ ’’ will come on when the ‘‘APS FF’’ or‘‘APS REW’’ function is started.

This system searches at the blank intervalsbetween selections. If there is a blank intervalwithin one program or there is no interval


3-13

Z 96.12.20/ X

between programs, the system may not stop inthe desired or expected location.

‘‘PROG’’ (program) button

Push the ‘‘PROG’’ (program) button to changethe tape side while the tape is being played.

The cassette tape will automatically changedirections to play the other side when the firstside is completed.

Dolby NR (noise reduction)button

Push the ‘‘DOLBY NR’’ button for Dolbynoise reduction encoded tapes to reduce highfrequency tape noise. The indicator will comeon.

Dolby noise reduction is manufactured underlicense from Dolby Laboratories LicensingCorporation. ‘‘DOLBY NR’’ and the double-Dsymbol are trademarks of Dolby LaboratoriesLicensing Corporation.

TAPE EJECT button

When this button is pushed with the tapeloaded, the tape will be ejected.

When the tape is ejected while it is beingplayed, the system will be turned off.

Metal or chrome tape usage

The cassette player will automatically set tohigh performance play when playing a metalor chrome cassette tape.

Precautions on cassette playeroperation

O To maintain good quality sound,INFINITI recommends that you usecassette tapes of 60 minutes orshorter in length.

O Cassette tapes should be removedfrom the player when not in use.Store cassettes in their protectivecases and away from direct sunlight,heat, moisture or magnetic sources.

Direct sunlight can cause the cas-sette to become deformed. The useof deformed cassettes may causethe cassette to jam in the player.

O Do not use cassettes that have peel-ing or loose labels. If used, the labelcould jam in the player.

O If a cassette has loose tape, insert apencil through one of the cassettehubs and rewind the tape firmly.Loose tape may cause jamming andwavering sound quality.

O Over a period of time, the playbackhead, capstan and pinch roller maygather a tape coating residue as thetape passes over the head. Thisresidue accumulation can cause aweak or wavering sound and shouldbe removed periodically with a headcleaning tape.

INFINITI offers a genuine tape player


3-14

Z 96.12.20/ X

cleaning kit. See your INFINITIdealer for details.

COMPACT DISC (CD) PLAYEROPERATION

Turn the ignition key to the ‘‘ACC’’ or ‘‘ON’’position and insert the compact disc into theslot with the label side facing up. The compactdisc will be guided automatically into the slotand start playing.

If the radio or tape is already operating, it willautomatically turn off and the compact discwill play.

CAUTION

Do not force the compact disc intothe slot. This could damage theplayer.

If the system has been turned off while thecompact disc was playing, pushing the

POWER/VOLUME knob will start the compactdisc. (When the system is turned off by the CDEJECT button ‘‘ ’’, however, the previousmode will begin.)

‘‘CD play/stop’’ button

O When this button is pushed with thesystem off and the compact disc loaded,the system will turn on and the compactdisc will start to play.

O When this button is pushed with thecompact disc loaded but the tape or theradio playing, the tape or radio will auto-matically be turned off and the compactdisc will start to play.

O When this button is pushed while thecompact disc is playing, the compact discwill stop playing. When this button ispushed with the compact disc stopped, thecompact disc will start to play.

‘‘CD CHG’’ (changer) button

When this button is pushed with the systemoff and the CD magazine loaded, the systemwill turn on and a compact disc will play. Afterloading the disc, the total number of tracks onthe disc and total play time will appear on thedisplay. The play time will then appear.

If the radio, tape or compact disc is alreadyoperating, it will automatically turn off and thecompact disc autochanger will play.

TUNE/DISC buttons

Use these buttons for selecting the compactdisc inserted into the CD magazine.

‘‘FF’’ (fast forward), ‘‘REW’’ (re-wind) button

When the ‘‘FF’’ (fast forward) or ‘‘REW’’ (re-wind) button is pushed while the compact discis being played, the compact disc will play


3-15

Z 96.12.20/ X

while fast forwarding or rewinding. When thebutton is released, the compact disc willreturn to normal play speed.

‘‘APS (Automatic ProgramSearch) FF’’, ‘‘APS REW’’button

When the ‘‘APS FF’’ button is pushed while thecompact disc is being played, the programnext to the present one will start to play fromits beginning. Push several times to skipthrough programs. The compact disc willadvance the number of times the button ispushed. (When the last program on thecompact disc is skipped through, the firstprogram will be played.)When the ‘‘APS REW’’button is pushed, the program being playedreturns to its beginning. Push several times toskip back through programs. The compactdisc will go back the number of times thebutton is pushed.

‘‘PROG’’ (program) button

When this button is pushed while the compactdisc is being played, play pattern will changeas follows:

ALL: All the programs will be played repeat-edly in sequence.

1: Only one program (the one being playedwhen the ‘‘PROG’’ button is pushed) will berepeated.

RANDOM: Programs will be played at ran-dom, not following the sequence on thecompact disc. The same program may berepeated twice.M (no mark): All the programs will be playedin sequence and stop when the last program isfinished.

O When the compact disc is ejected,the play pattern will automaticallychange to ALL.

CD EJECT button

When the CD EJECT ‘‘ ’’ button is pushedwith the compact disc loaded, the compactdisc will be ejected.

When this button is pushed while the compactdisc is being played, the compact disc willcome out and the system will turn off.

If the compact disc comes out and is notremoved, it will be pulled back into theslot to protect it.

DISC indicator light

This light comes on when the compact disc isloaded.

CAUTION

O During cold weather or rainydays, the player may malfunctiondue to the humidity. If this oc-


3-16

Z 96.12.20/ X

curs, remove the CD and dehu-midify or ventilate the playercompletely.

O The player may skip while drivingon rough roads.

O The CD player sometimes cannotfunction when the compartmenttemperature is extremely high.Decrease the temperature beforeuse.

O Do not expose the CD to directsunlight.

COMPACT DISC (CD) AUTOCHANGER OPERATION(If so equipped)

Insert the CD magazine into the changer withthe label side facing up.

Insert the CD magazine into the changer, asillustrated. Close the sliding lid of the com-

pact disc auto changer.

When ejecting the CD magazine, press theEJECT button ‘‘ ’’ located inside the com-pact disc auto changer.

1. Disc loading

O Hold the disc with the label facing up.Load the disc as shown in the illustration.

IHA028-A

SIH0036


3-17

Z 96.12.20/ X

O When the disc is properly set to the CDmagazine, the * marked area (white area)will be raised.

2. Disc removal

O Pull the * marked area with your fingers topartially remove the disc from the maga-zine.

O Use your fingertips to grasp the edge ofthe disc. Remove the disc as shown in theillustration.

CAUTION

Do not touch the playing surface ofthe disc.

Do not use 8 cm discs. They maycause player damage even if usingwith the optional adapter.

POWER ANTENNA

The antenna will automatically extend whenthe radio is turned on, and retract whenswitched off. If the radio is left on, the antennawill retract and extend with the ignition key‘‘OFF-ON’’ operation.

CAUTION

O Before turning the radio on, makesure that no one is near the an-tenna outlet and there is enoughspace for it to extend.

O To prevent damage, be sure thatantenna is fully retracted beforethe vehicle enters an automaticcar wash.

O Dirt and other foreign matter onthe power antenna rod may inter-rupt its operation. Clean the rod

periodically with a damp cloth.This type of cleaning is especiallyimportant during the winter sea-sons in areas where road salt andother chemicals may be spreadon road surfaces and splashedonto the antenna rod.

CB RADIO OR CAR PHONE

If equipped with a genuine cellular phone,

SIH0035


3-18

Z 96.12.20/ X

your INFINITI features a non-directional mi-crophone in the steering column cover, so it isnot necessary to look at or speak directly intothe microphone when calling.To do so could detract from the drivingoperation and cause an accident.

See the manual for car phone operation.

Some models are pre-wired to accept thegenuine INFINITI cellular phone. In addition,the some models have the phone antenna builtinto the rear glass window.

When installing a CB radio or a car phone inyour INFINITI, be sure to observe the follow-ing cautions, otherwise the new equipmentmay adversely affect the Multiport Fuel Injec-tion system and other electronic parts.

CAUTION

● Keep the antenna as far as pos-sible away from the ElectronicControl Unit (including radio).

● Keep the antenna wire more than8 inches (20 cm) away from theMultiport Fuel Injection harness.Do not route the antenna wirenext to any harness.

● Adjust the antenna standing-waveratio as recommended by themanufacturer.

● Connect the ground wire from theradio chassis to the body.

● For details, consult your INFINITIdealer.


3-19

Z 96.12.20/ X

Z 96.12.20/ X

4 STARTING AND DRIVING

Precautions when starting and driving ...... 4-2Avoiding collision and rollover .................. 4-4Drinking alcohol/drugs and driving ............ 4-5Ignition switch ........................................... 4-5Before starting the engine .......................... 4-7Starting the engine ..................................... 4-8Driving with automatic transmission ......... 4-8Parking brake ........................................... 4-13Cruise control ........................................... 4-14Break-in schedule ..................................... 4-16Economy hints ......................................... 4-17Parking/parking on hills ........................... 4-18Power assisted system ............................ 4-19Brake system ............................................ 4-19Anti-lock brake system ............................ 4-20Traction control system ........................... 4-22Cold weather driving ................................ 4-22

Z 96.12.20/ X

PRECAUTIONS WHENSTARTING AND DRIVING

WARNING

Do not leave children, unreliableadults, or pets alone in your vehicle.They could accidentally injure them-selves or others through inadvertentoperation of the vehicle. Also, onhot, sunny days, temperatures in aclosed vehicle could quickly becomehigh enough to cause severe or pos-sibly fatal injuries to people or ani-mals.

EXHAUST GAS (Carbon Mon-oxide)

WARNING

Do not breathe exhaust gases. Theycontain colorless and odorless car-bon monoxide. Carbon monoxide isdangerous and can cause uncon-sciousness or death.

● If you suspect that exhaust fumesare entering the vehicle, drivewith all windows fully open, andhave the vehicle inspected imme-diately.

● Do not run the engine in closedspaces such as a garage.

● Do not park the vehicle with theengine running for any extendedlength of time.

● Keep the trunk lid closed whiledriving, otherwise exhaust gasesmay be drawn into the passengercompartment. If you must drivewith the rear lid open follow theseprecautions:

1. Open all the windows.

2. Set the air recirculate switch‘‘OFF’’ and the fan control at‘‘high’’ to circulate the air.

● If electrical wiring or other cableconnections must be routed to atrailer through the seal on thetrunk lid or the body, follow themanufacturer’s recommendationto prevent carbon monoxide entryinto the vehicle.

● If a special body or other equip-ment is added for recreational or

STARTING AND DRIVING

4-2

Z 96.12.20/ X

other usage, follow themanufacturer’s recommendationto prevent carbon monoxide entryinto the vehicle. (Some recre-ational vehicle appliances suchas stoves, refrigerator, heaters,etc. may also generate carbonmonoxide.)

O The exhaust system and bodyshould be inspected by a quali-fied technician whenever:

a. The vehicle is raised for ser-vice.

b. You suspect that exhaustfumes are entering into thepassenger compartment.

c. You notice a change in thesound of the exhaust system.

d. You have had an accident in-volving damage to the exhaustsystem, underbody, or rear ofthe vehicle.

THREE WAY CATALYST

The three way catalyst is an emission controldevice installed in the exhaust system. Ex-haust gases in the three way catalyst areburned at high temperatures to help reducepollutants.

WARNING

O The exhaust gas and the exhaustsystem are very hot. Keeppeople, animals or flammablematerials away from the exhaustpipe.

O Do not stop or park the vehicleover flammable materials such asdry grass, waste paper or rags.They may ignite and cause a fire.

CAUTION

O Do not use leaded gasoline.Deposits from leaded gasolinewill seriously reduce the threeway catalyst ability to reduce ex-haust pollutants.

O Keep your engine tuned up. Mal-functions in the ignition, fuel in-jection, or electrical systems cancause overrich fuel flow into thethree way catalyst, causing it tooverheat. Do not keep driving if


4-3

Z 96.12.20/ X

the engine misfires, or if notice-able loss of performance or otherunusual operating conditions aredetected. Have the vehicle in-spected promptly by an autho-rized INFINITI dealer.

O Avoid driving with an extremelylow fuel level. Running out of fuelcould cause the engine to misfire,damaging the three way catalyst.

O Do not race the engine whilewarming it up.

O Do not push or tow your vehicle tostart the engine.

AVOIDING COLLISION ANDROLLOVER

WARNING

Failure to operate this vehicle in asafe and prudent manner may resultin loss of control or an accident.

Be alert and drive defensively at all times.Obey all traffic regulations. Avoid excessivespeed, high speed cornering, or sudden steer-ing maneuvers, because these driving prac-tices could cause you to lose control of yourvehicle. As with any vehicle, a loss ofcontrol could result in a collision withother vehicles or objects, or cause thevehicle to rollover, particularly if theloss of control causes the vehicle toslide sideways. Be attentive at all times,and avoid driving when tired. Never drivewhen under the influence of alcohol or drugs

(including prescription or over-the-counterdrugs which may cause drowsiness). Alwayswear your seat belt as outlined in the ‘‘SeatBelts’’ section of this manual, and also instructyour passengers to do so.


4-4

Z 96.12.20/ X

DRINKING ALCOHOL/DRUGS AND DRIVING

WARNING

Never drive under the influence ofalcohol or drugs. Alcohol in theblood stream reduces coordination,delays reaction time and impairsjudgement. Driving after drinking al-cohol increases the likelihood of be-ing involved in an accident injuringyourself and others. Additionally, ifyou are injured in the accident alco-hol can increase the severity of in-jury.

INFINITI is committed to safe driving. But, youmust choose not to drive under the influenceof alcohol. Every year thousands of people areinjured or killed in alcohol related accidents.Although the local laws vary on what isconsidered to be legally intoxicated, the fact is

that alcohol affects all people differently andmost people underestimate the effects ofalcohol.

Remember, drinking and driving don’t mix!

And that’s true for drugs too (over the counter,prescription, and illegal drugs). Don’t drive ifyour ability to operate your vehicle is impairedby alcohol, drugs, or some other physicalcondition.

IGNITION SWITCHThe switch includes an anti-theft steering lockdevice.

‘‘LOCK’’ Normal parking position (0)

The ignition key can only be removed whenthe switch is in this position.

The ignition lock is designed so that the keycannot be turned to ‘‘LOCK’’ and removed untilthe selector lever is moved to the ‘‘P’’ position.

When removing the key from the ignition,

SIS0007


4-5

Z 96.12.20/ X

make sure the selector lever is in the ‘‘P’’position.

If the selector lever is not returned to ‘‘P’’, thekey cannot be moved toward LOCK.

When the key cannot be turned toward the‘‘LOCK’’ position, proceed as follows to re-move the key:

1) Move the selector lever into the ‘‘P’’ posi-tion.

2) Turn the ignition key slightly in the ‘‘ON’’direction.

3) Turn the key toward the ‘‘LOCK’’ position.

4) Remove the key.

If the key is removed from the ignition switch,the select lever cannot be moved from ‘‘P’’(Park). The selector lever can be movedif the ignition switch is in the ‘‘ON’’position and the foot brake pedal isdepressed.

To lock the steering wheel, remove thekey. To unlock the steering wheel,insert the key and turn it gently whilerotating the steering wheel slightlyright and left.

WARNING

Never remove the key while driving.If the key is removed, the steeringwheel will lock. This may cause thedriver to lose control of the vehicleand could result in serious vehicledamage or personal injury.

‘‘OFF’’ (1)

The engine can be turned off without lockingthe steering wheel.

The ignition lock is designed so that the keycannot be turned to ‘‘LOCK’’ and removed untilthe selector lever is moved to the ‘‘P’’ position.

‘‘ACC’’ (Accessories) (2)

This position activates electrical accessoriessuch as the radio when the engine is notrunning.

‘‘ON’’ Normal operating position (3)

This position turns on the ignition system andthe electrical accessories.

’’START’’ (4)

This position activates the starter motor,starting the engine.


4-6

Z 96.12.20/ X

Emergency release lever

When the battery is flat, the key may not bereleased from the ignition switch even if theselector lever is in ‘‘P’’. Proceed as follows toremove the key:

1. Remove the instrument lower panel fromunder the steering column.

2. Push the emergency release lever forignition key release under the steeringcolumn.

3. Turn the key toward the ‘‘LOCK’’ position.

4. Remove the key from the ignition switch.

IPPS (Infiniti Personalized Pro-tection System)

The IPPS will not allow the engine to startwithout the use of the registered IPPS key.

If the engine failed to start using the registeredIPPS key (for example when keys are contact-ing), restart the engine using the followingprocedures:

1. Leave the ignition key in the ‘‘ON’’ positionfor approximately 5 seconds.

2. Turn ignition key to the ‘‘OFF’’ or ‘‘LOCK’’position and wait approximately 5 sec-onds.

3. Repeat step 1 and 2 again.

4. Restart the engine while keeping the keyseparate from any other keys on thekey-chain.

BEFORE STARTING THEENGINEO Make sure the area around the vehicle is

clear.

O Maintenance items listed here should bechecked periodically, e.g., each time youcheck engine oil.

O Check that all windows and lights areclean.

O Visually inspect tires for condition. Alsocheck tire pressure.

O Lock all doors.

O Position seat and adjust head restraints.

O Adjust inside and outside mirrors.

O Fasten seat belts and ask all passengers todo likewise.

O Check the operation of warning lightswhen key is turned to the ‘‘ON (3)’’position.

SIS0008


4-7

Z 96.12.20/ X

STARTING THE ENGINE1. Apply the parking brake.

2. Move the selector lever to ‘‘P’’ (Park) or‘‘N’’ (Neutral). (‘‘P’’ preferred.)

The selector lever cannot be moved outof ‘‘P’’ and into any of the other gearpositions if the ignition key is turned to‘‘LOCK’’, ‘‘OFF’’ or ‘‘ACC’’ or if the keyis removed from the ignition switch.

The starter is designed not to operate ifthe selector lever is in one of thedriving positions.

3. Crank the engine with your foot off theaccelerator pedal by turning the ignitionkey to ‘‘START’’. Release the key when theengine starts. If the engine starts, but failsto run, repeat the above procedure.

— If the engine is very hard to startin extremely cold or hot weather, de-press the accelerator pedal and hold

it to help start the engine.

CAUTION

Do not operate the starter for morethan 15 seconds at a time. If theengine does not start, turn the keyoff and wait 10 seconds beforecranking again, otherwise the startercould be damaged.

4. Warm-upAllow the engine to idle for at least 30seconds after starting. Drive at moderatespeed for a short distance first, especiallyin cold weather.

DRIVING WITH AUTOMATICTRANSMISSIONThe automatic transmission in your vehicle iselectronically controlled by a microcomputer to

produce maximum power and smooth opera-tion.

Shown on the following pages are the recom-mended operating procedures for this trans-mission. Follow these procedures for maxi-mum vehicle performance and drivingenjoyment.


4-8

Z 96.12.20/ X

Starting the vehicle

O After starting the engine, fully depress thefoot brake pedal before shifting the selectorlever to the ‘‘R’’, ‘‘N’’, ‘‘D’’, ‘‘2’’ or ‘‘1’’ posi-tion. Be sure the vehicle is fully stopped be-fore attempting to shift the selector lever.

This automatic transmission is de-

signed so that the foot brake pedalMUST be depressed before shiftingfrom ‘‘P’’ to any drive position whilethe ignition switch is ‘‘ON’’.

The selector lever cannot be moved outof ‘‘P’’ and into any of the other gearpositions if the ignition key is turned tothe ‘‘LOCK’’, ‘‘OFF’’ or ‘‘ACC’’ positionor if the key is removed from theignition switch.

1. Keep the foot brake pedal depressed andpush the selector lever button to shift intoa driving gear.

2. Release the parking brake and foot brake,then gradually start the vehicle in motion.

WARNING

O If the selector lever cannot bemoved from the P (Park) positionwhile the engine is running andthe brake pedal is depressed, thestoplights may not work. Malfunc-tioning stoplights could cause anaccident injuring yourself andothers.

O Do not depress the acceleratorpedal while shifting from ‘‘P’’ or‘‘N’’ to ‘‘R’’, ‘‘D’’, ‘‘2’’ or ‘‘1’’.Always depress the brake pedaluntil shifting is completed. Fail-ure to do so could cause you tolose control and have anaccident.

SIS0009


4-9

Z 96.12.20/ X

O Cold engine idle speed is higher,so use caution when shifting intoa forward or reverse gear beforethe engine has warmed up.

O Never shift to ‘‘P’’ or ‘‘R’’ whilevehicle is moving. This couldcause an accident.

O On slippery roads, do not down-shift. This may cause a loss ofcontrol.

CAUTION

When stopping the vehicle on anuphill grade, do not hold the vehicleby depressing the accelerator pedal.The foot brakes should be used forthis purpose.

Push the button to shift into ‘‘P’’, ‘‘R’’ or from‘‘D’’ to ‘‘2’’. All other positions can be selectedwithout pushing the button.

‘‘P’’ (Park):

Use this selector position when the vehicle isparked or when starting the engine. Make surethe vehicle is completely stopped. For maxi-mum safety, depress the brake pedal, thenpush in the selector lever button and move thelever to the ‘‘P’’ position. Apply the parking

SIS0010

SIS0011


4-10

Z 96.12.20/ X

brake. When parking on a hill, apply the park-ing brake first, then selector the lever into the‘‘P’’ position.

‘‘R’’ (Reverse):

Use this position to back up. Always be surethe vehicle is completely stopped when se-lecting ‘‘R’’. With the brake pedal depressed,

push in the selector lever button and move thelever to the ‘‘R’’ position.

‘‘N’’ (Neutral):

Neither forward or reverse gear is engaged.The engine can be started in this position.You may shift to ‘‘N’’ and restart a stalledengine while the vehicle is moving.

‘‘D’’ (Drive):

Use this position for all normal forwarddriving.

‘‘2’’ (Second gear):

Use for hill climbing or engine braking ondownhill grades.

Do not downshift into the ‘‘2’’ position atspeeds over 62 MPH (100 km/h). Do not ex-ceed 62 MPH (100 km/h) in the ‘‘2’’ position.

‘‘1’’ (Low gear):

Use this position when climbing steep hillsslowly or driving slowly through deep snow,

sand or mud, or for maximum engine brakingon steep downhill grades.

Do not shift into the ‘‘1’’ position at speedsover 62 MPH (100 km/h). Do not exceed 25MPH (40 km/h) in the ‘‘1’’ position.

Accelerator downshift— In ‘‘D’’ position —

For passing or hill climbing, fully depress theaccelerator pedal to the floor. This shifts thetransmission down into second gear or firstgear, depending on the vehicle speed.

SIS0012


4-11

Z 96.12.20/ X

Overdrive switch

ON: For normal driving, push the over-drive switch ‘‘ON ’’ with the se-lector lever in the ‘‘D’’ position. Thetransmission is upshifted into OVER-DRIVE as the vehicle speed increases.

The overdrive will not engage until theengine has warmed up.

OFF: For driving up and down long slopeswhere engine ‘‘braking’’ would beadvantageous, push the switch ‘‘OFF

’’. When cruising at a low speedor climbing a gentle slope, you mayfeel uncomfortable shift shocks as thetransmission shifts between 3rd andoverdrive repeatedly. In this case, setthe overdrive switch in the ‘‘OFF

’’ position. The indicator lightwill come on at this time.

When driving conditions change, reset theoverdrive switch in the ‘‘ON ’’ position.

Remember not to drive at high speeds forextended periods of time with the overdriveswitch set in the ‘‘OFF ’’ position. Thisreduces the fuel economy.

Fail-safe

When the Fail-safe operation occurs, the nexttime the key is turned to the ‘‘ON’’ position, the‘‘O/D OFF’’ indicator light will blink for ap-proximately 8 seconds after coming on for 2seconds. While the vehicle can be drivenunder these circumstances please note that

the gears in the automatic transmission will belocked in third gear.

If the vehicle is driven under extremeconditions, such as excessive wheelspinning and subsequent hard braking,the Fail-safe system may be activated.This will occur even if all electricalcircuits are functioning properly. In thiscase, turn the ignition key ‘‘OFF’’ andwait for 3 seconds. Then turn the keyback to the ‘‘ON’’ position. The vehicleshould return to its normal operatingcondition. If it does not return to itsnormal operating condition have yourINFINITI dealer check the transmissionand repair if necessary.

SIS0015


4-12

Z 96.12.20/ X

Shift lock release button

If the battery charge is low, the select levermay not be moved from the ‘‘P’’ position evenwith the brake pedal depressed and the selectlever button pushed.

To move the select lever, push the shift lockrelease button and select lever button. Theselect lever can be moved to Neutral (‘‘N’’).

To push the shift lock release button, followthe procedure as illustrated.

If there is any problem moving the lever out of‘‘P’’, have your INFINITI dealer check theautomatic transmission system as soon aspossible.

WARNING

If the selector lever cannot be movedfrom the P (Park) position while theengine is running and the brake

pedal is depressed, the stoplightsmay not work. Malfunctioning stop-lights could cause an accident injur-ing yourself and others.

PARKING BRAKE

To apply: Fully depress the parking brakepedal.

To release:

1. Firmly apply the foot brake.

SIS0014

ISD019M


4-13

Z 96.12.20/ X

2. Move the selector lever to the ‘‘P’’ (Park)position.

3. Pull the release lever.

4. Before driving, be sure the brake warninglight goes out.

WARNING

O Be sure the parking brake is fullyreleased before driving. Failureto do so can cause brake failureand lead to an accident.

O Do not release the parking brakefrom outside the vehicle.

O Do not use the gear shift in placeof the parking brake. When park-ing, be sure the parking brake isfully engaged.

O Do not leave children unattendedin a vehicle. They could releasethe parking brake and cause anaccident.

CRUISE CONTROLThe cruise control allows driving at a speedbetween 30 to 89 MPH (48 to 144 km/h)without keeping your foot on the acceleratorpedal.

SIS0013


4-14

Z 96.12.20/ X

To turn on the cruise control, push themain switch on. The indicator light on theswitch will come on.

To set cruising speed, accelerate yourvehicle to the desired speed, push theCOAST/SET switch and release it. (The‘‘CRUISE’’ light will come on.) Take your footoff the accelerator pedal. Your vehicle willmaintain the set speed.

O When passing a vehicle, depress theaccelerator pedal. When you release thepedal, the vehicle will return to the previ-ously set speed.

O The vehicle may not maintain the set speedwhen going up or down steep hills. If thishappens, drive without the cruise control.

To cancel the preset speed, follow any ofthese methods:

a) Push the cancel button; The ‘‘CRUISE’’light will go out.

b) Tap the brake pedal; The ‘‘CRUISE’’ lightwill go out.

c) Move the selector lever to the ‘‘N’’ position;The ‘‘CRUISE’’ light will go out.

d) Turn the main switch off. Both the ‘‘ON’’indicator and ‘‘CRUISE’’ lights will go out.

O If you depress the brake pedal whilepushing the ‘‘ACCEL/RESUME’’ switch or‘‘COAST/SET’’ switch and reset at thecruising speed, the cruise control willdisengage. Turn the main switch off onceand then turn it on again.

O The cruise control will automatically can-cel if the vehicle slows down below ap-proximately 8 MPH (13 km/h).

To reset at a faster cruising speed, useone of the following methods:

a) Depress the accelerator pedal. When thevehicle attains the desired speed, push andrelease the ‘‘COAST/SET’’ switch.

b) Push and hold the ‘‘ACCEL’’ set switch.When the vehicle attains the speed youdesire, release the switch.

c) Push, then quickly release the ‘‘ACCEL’’set switch. Each time you do this, the setspeed will increase by about 1 MPH (1.6km/h).

To reset at a slower cruising speed, useone of the following methods:

a) Lightly tap the brake pedal. When thevehicle attains the desired speed, push the‘‘COAST/SET’’ switch and release it.

b) Push and hold the ‘‘COAST/SET’’ switch.Release the switch when the vehicle slowsdown to the desired speed.

c) Push, then quickly release the ‘‘COAST/SET’’ switch. Each time you do this, the setspeed will decrease by about 1 MPH (1.6km/h).

To resume the preset speed, push and


4-15

Z 96.12.20/ X

release the ‘‘RESUME’’ set switch. The vehiclewill resume the last set cruising speed whenthe vehicle speed is over 30 MPH (48 km/h).

Precautions

O If the cruise control system malfunctions,it will cancel automatically. The cruiseindicator in the meter assembly will thenblink to warn the driver.

O If the cruise indicator blinks, turn thecruise control switch (Main switch) ‘‘OFF’’and have the system checked by yourINFINITI dealer.

O The cruise indicator may sometimes blinkwhen the cruise control switch (Mainswitch) is turned ‘‘ON’’ while pushing the‘‘ACCEL/RESUME’’ switch or ‘‘COAST/SET’’switch or ‘‘CANCEL’’ switch (located on thesteering wheel). To properly set the cruisecontrol system, perform the steps above inthe order indicated.

WARNING

Do not use the cruise control whendriving under the following condi-tions:

O when it is not possible to keep thevehicle at set speed.

O in heavy traffic or in traffic thatvaries in speed.

O on winding or hilly roads.

O on slippery roads (rain, snow,ice, etc.)

O in very windy areas.

Doing so could cause a loss of ve-hicle control and result in an acci-dent.

BREAK-IN SCHEDULEYour driving habits during the first 1,000 miles(1,600 km) of vehicle operation are importantto the future reliability and economy of yournew INFINITI. Listed below are driving recom-mendations that will allow proper break-in ofengine components. Driving the vehicle toohard during the break-in may result in vehicledamage or shortened engine life.

O Do not drive over 55 MPH (90 km/h) anddo not run the engine over 4,000 rpm.Avoid driving for long periods at constantspeed, either fast or slow.

O Do not accelerate at full throttle in anygear.

O Avoid quick starts.

O Avoid hard braking as much as possible.

O Do not tow a trailer for the first 500 miles(800 km).


4-16

Z 96.12.20/ X

ECONOMY HINTSO Accelerate slowly and smoothly. Maintain

cruising speeds with a constant acceleratorposition.

O Drive at moderate speeds on the highway.

O Avoid unnecessary stopping and braking.Keep a safe distance behind other vehicles.

O Select a gear range suitable to road con-ditions.

O Avoid unnecessary prolonged engineidling.

O Keep your engine tuned up.

O Follow the recommended periodic mainte-nance schedule.

O Keep the tires inflated at the correct pres-sure. Improper tire pressure will increasewear and waste fuel.

O Make sure the front wheels are properlyaligned. Improper alignment will cause

premature tire wear and lower fueleconomy.

O Air conditioner operation lowers fueleconomy. Use the air conditioner onlywhen necessary.

O When cruising at highway speeds, it ismore economical to use the air conditionerand leave the windows closed to reducedrag.


4-17

Z 96.12.20/ X

PARKING/PARKING ONHILLS

WARNING

Do not park the vehicle over flam-mable materials such as dry grass,waste paper or rags. They may igniteand cause a fire.

1. Firmly apply the parking brake.

2. Move the selector lever to the ‘‘P’’ (PARK)position.

WARNING

Safe parking procedures require thatboth the parking brake be set and thetransmission placed into the ‘‘P’’position. Failure to do so could

cause the vehicle to move unexpect-edly or roll away and result in anaccident. Make sure the shift leverhas been pushed as far forward as itcan go and cannot be moved.

3. To help prevent the vehicle from rollinginto the street when parked on a slopingdrive way, it is a good practice to turn thewheels as illustrated.

O HEADED DOWNHILL WITH CURB:j1

Turn the wheels into the curb and movethe vehicle forward until the curb sidewheel gently touches the curb.

O HEADED UPHILL WITH CURB:j2

Turn the wheels away from the curb andmove the vehicle back until the curb sidewheel gently touches the curb.

ISD001


4-18

Z 96.12.20/ X

O HEADED UPHILL OR DOWNHILL, NOCURB:j3

Turn the wheels toward the side of theroad so the vehicle will move away fromthe center of the road if it moves.

4. Turn the ignition key to the ‘‘LOCK’’position and remove the key.

WARNING

O Never leave the engine runningwhile the vehicle is unattended.

O Never leave children unattendedin the vehicle.

POWER ASSISTED SYS-TEMThe power assisted steering is designed touse a hydraulic pump, driven by the engine, toassist steering.

If the engine stops or the drive belt breaks,you will still have control of the vehicle.However, much greater steering effort isneeded, especially in sharp turns or at lowspeeds.

BRAKE SYSTEMThe brake system has two separate hydrauliccircuits. If one circuit develops a problem, youwill still have braking at two wheels.

Vacuum assisted brakes

The brake booster aids braking by usingengine vacuum. If the engine stops, you canstop the vehicle by depressing the brakepedal. However, greater foot pressure on thebrake pedal will be required to stop the vehicleand the stopping distance will be longer.

Wet brakes

When the vehicle is washed or driven throughwater, the brakes may get wet. As a result,your braking distance will be longer and the

vehicle may pull to one side during braking.

To dry brakes, drive the vehicle at a safespeed while lightly pressing the brake pedal toheat-up the brakes. Do this until the brakesreturn to normal. Avoid driving the vehicle athigh speeds until the brakes function cor-rectly.

Parking brake bedding

The parking brake shoes must be ‘‘beddeddown’’ whenever the stopping effect of theparking brake is weakened or whenever theparking brake shoes and/or drums are re-placed, in order to assure the best brakingperformance.

This procedure is described in the Vehicleservice manual and can be performed by yourINFINITI dealer.

Using the brakes

Avoid resting your foot on the brake pedalwhile driving. This will overheat the brakes,


4-19

Z 96.12.20/ X

wear out the brake linings and pads faster andreduce gas mileage.

To help save the brakes and to prevent thebrakes from overheating, reduce speed anddownshift to a lower gear before going downa slope or long grade. Overheated brakes mayreduce braking performance and could resultin loss of vehicle control.

WARNING

While driving on a slippery surface,be careful when braking, accelerat-ing or downshifting. Abrupt brakingor accelerating could cause thewheels to skid and result in an acci-dent.

ANTI-LOCK BRAKE SYS-TEMThe anti-lock brake system controls the brakes

at each wheel so the wheels will not lock whenbraking abruptly or when braking on slipperysurfaces. The system detects the rotationspeed at each wheel and varies the brake fluidpressure to prevent each wheel from locking.By preventing wheel lockup, the system helpsthe driver maintain steering control and helpsto minimize swerving and spinning on slip-pery surfaces.

Using the system

Depress the brake pedal and hold it down.

WARNING

Do not pump the brake pedal. Doingso may result in increased stoppingdistances.

Normal operation

The anti-lock brake system will not operate atspeeds below 3 to 6 MPH (5 to 10 km/h) to

completely stop the vehicle. (The speeds willvary according to road conditions.) When theanti-lock system senses that one or morewheels are close to locking up, the actuator(under the hood) rapidly applies and releaseshydraulic pressure (like pumping the brakesvery quickly). While the actuator is working,you may feel a pulsation in the brake pedaland hear a noise or vibration from the actuatorunder the hood. This is normal and indicatesthat the anti-lock system is working properly.However, the pulsation may indicate that roadconditions are hazardous and extra care isrequired while driving.

Self-test feature

The anti-lock brake system consists of elec-tronic sensors, electric pumps, and hydraulicsolenoids controlled by a computer. Thecomputer has a built-in diagnostic feature thattests the system each time you start the engineand move the vehicle at a low speed inforward or reverse. When the ‘‘self-test’’ oc-


4-20

Z 96.12.20/ X

curs, you may hear a ‘‘clank’’ noise and/or feela ‘‘pulsation’’ in the brake pedal. This isnormal and is not an indication of anymalfunction. If the computer senses any mal-function, it switches the anti-lock brake sys-tem OFF and turns on the ‘‘ABS’’ brakewarning light in the dashboard. The brakesystem will then behave normally, but withoutanti-lock assistance.

If the light comes on during the self check, orwhile you are driving, you should take yourvehicle to your INFINITI dealer for repair atyour earliest convenience.

WARNING

The anti-lock brake system is a so-phisticated device, but it cannot pre-vent accidents resulting from care-less or dangerous driving tech-niques. It can help maintain vehicle

control during braking on slipperysurfaces, but remember that thestopping distance on slippery sur-faces will be longer than on normalsurfaces, even with the anti-locksystem. Stopping distances mayalso be longer on rough, gravel orsnow covered roads, or if you areusing tire chains. Always maintain asafe distance from the vehicle infront of you. Ultimately, the respon-sibility for safety of self and othersrests in the hands of the driver.

Tire type and condition may alsoaffect braking effectiveness.

O When replacing tires, install thespecified size of tires on all 4wheels.

O When installing a spare tire,

make sure it is the proper sizeand type as specified on the tireplacard. For tire placard locationinformation, refer to ‘‘Tireplacard’’ in the ‘‘Technical andconsumer information’’ section ofthis Owner’s Manual.


4-21

Z 96.12.20/ X

TRACTION CONTROL SYS-TEMOn slippery surfaces such as wet asphaltroads, vehicle wheels may spin when thevehicle is accelerated. This wheel spin re-duces acceleration, or causes the vehicle toswerve, thus decreasing vehicle stability.

When the vehicle drive wheels begin to spin,the traction control system controls the enginetorque using an electronic control system andit also controls automatic control shifting ifnecessary. This reduces spinning of the drivewheels, and results in improved vehicle ac-celeration performance. It also improves thevehicle’s stability by preventing swerving mo-tion.

O Indicator lightIf trouble occurs in the traction controlsystem, the warning lights ‘‘SLIP’’ and‘‘ ’’ come on in the meter panel.As long as these warning lights are on, the

traction control function is canceled. Thevehicle will behaves like a model withoutthe traction control system.

WARNING

This system is designed to preventthe wheels from spinning. However,it does not prevent vehicle slippingor spinning due to abrupt steeringoperation at high speeds or by care-less or dangerous driving tech-niques. Be especially careful whendriving on slippery surfaces and al-ways drive safely.

COLD WEATHER DRIVING

Freeing a frozen door lock

To prevent a door lock from freezing, applyde-icer or glycerin through the key hole. If thelock becomes frozen, heat the key before

inserting it into the key hole.

Be careful not to damage the plastic part of thekey.

Anti-freeze

When it is anticipated that the temperature willdrop below 32°F (0°C), check the anti-freeze(ethylene glycol base) to assure proper winterprotection. For details, see ‘‘Engine coolingsystem’’ in the ‘‘Do-it-yourself’’ section.

Battery

If the battery is not fully charged duringextremely cold weather conditions, the batteryfluid may freeze and damage the battery. Tomaintain maximum efficiency, the batteryshould be checked regularly. For details, see‘‘Battery’’ in the ‘‘Do-it-yourself’’ section.

Draining of coolant water

If the vehicle is to be left outside withoutanti-freeze, drain the cooling system by open-ing the drain valves located under the radiator


4-22

Z 96.12.20/ X

and on the engine block. Refill before oper-ating the vehicle. See ‘‘Changing enginecoolant’’ in the ‘‘Do-it-yourself’’ section.

Tire equipment

1. SUMMER tires are of a tread design toprovide superior performance on dry pave-ment. However, the performance of thesetires will be substantially reduced in snowyand icy conditions. If you operate yourvehicle on snowy or icy roads, INFINITIrecommends the use of MUD & SNOW orALL SEASON tires on all four wheels.Please consult your INFINITI dealer for thetire type, size, speed rating and availabilityinformation.

2. For additional traction on icy roads, stud-ded tires may be used. However, someprovinces and states prohibit their use.Check local, state and provincial lawsbefore installing studded tires.

Skid and traction capabilities of stud-

ded snow tires, on wet or dry surfaces,may be poorer than that of non-studdedsnow tires.

3. Tire chains may be used if desired. Makesure they are of proper size for the tires onyour vehicle and are installed according tothe chain manufacturer’s suggestions.

Use of tire chains may be prohibited accord-ing to location. Check the local laws beforeinstalling tire chains. When installing tirechains, make sure they are of proper size forthe tires on your vehicle and are installedaccording to the chain manufacturer’s sugges-tions. Use only SAE Class ‘‘S’’ chains.Other types may damage your vehicle. Usechain tensioners when recommended by thetire chain manufacturer to ensure a tight fit.Loose end links of the tire chain must besecured or removed to prevent the possibilityof whipping action damage to the fenders orunderbody. If possible, avoid fully loadingyour vehicle when using tire chains. In addi-

tion, drive at a reduced speed. Otherwise, yourvehicle may be damaged and/or vehicle han-dling and performance may be adverselyaffected.

Never install tire chains on a T-type spare tire.Do not use tire chains on dry roads.

Special winter equipment

It is recommended that the following items becarried in the vehicle during winter:

1. A scraper and stiff-bristled brush to re-move ice and snow from the windows andwiper blades.

2. A sturdy, flat board to be placed under thejack to give it firm support.

3. A shovel to dig the vehicle out of snow-drifts.

4. Extra window washer fluid to refill thereservoir tank.


4-23

Z 96.12.20/ X

Driving on snow or ice

WARNING

O Wet ice (32°F, 0°C and freezingrain), very cold snow or ice canbe slick and very hard to drive on.The vehicle will have a lot lesstraction or ‘‘grip’’ under theseconditions. Try to avoid drivingon wet ice until the road is saltedor sanded.

O Whatever the condition, drivewith caution. Accelerate and slowdown with care. If accelerating ordownshifting too fast, the drivewheels will lose even more trac-tion.

O Allow more stopping distance un-der these conditions. Braking

should be started sooner than ondry pavement.

O Allow greater following distanceson slippery roads.

O Watch for slippery spots (glareice). These may appear on anotherwise clear road in shadedareas. If a patch of ice is seenahead, brake before reaching it.Try not to brake while actually onthe ice, and avoid any suddensteering maneuvers.

O Do not use cruise control on slip-pery roads.

O Snow can trap dangerous exhaustgases under your vehicle. Keepsnow clear of the exhaust pipeand from around your vehicle.

Engine block heater/Engineheater (If so equipped)

An engine block heater/engine heater to assistextreme cold temperature starting is availablethrough your INFINITI dealer.

WARNING

Do not use your heater with an un-grounded electrical system or two-pronged (cheater) adapters. You canbe injured by an electrical shock ifyou use an ungrounded connection.


4-24

Z 96.12.20/ X

5 IN CASE OF EMERGENCY

Roadside assistance program .................... 5-2Flat tire ....................................................... 5-2Jump starting ............................................. 5-6Push starting .............................................. 5-9If your vehicle overheats ............................ 5-9Tow truck towing ..................................... 5-10Freeing vehicle from sand, snow ormud .......................................................... 5-12

Z 96.12.20/ X

ROADSIDE ASSISTANCEPROGRAMEvery new INFINITI comes with a 4 year,unlimited mileage Roadside Assistance plan.In the event of a roadside emergency, Road-side Assistance Service is available to you.Please refer to your Warranty Booklet fordetails. Both the Warranty Booklet and Road-side Assistance Calling Card in your Owner’sLiterature Portfolio provide the Toll-FreeNumber to call for assistance. Roadside As-sistance is provided 24 hours a day, 365 daysa year, for four years from the date sold to giveemergency roadside help, in the event ofmechanical or nonmechanical trouble(s) suchas flat tires, out-of-gas, dead battery, lost keysmechanical breakdown, accident, etc.

FLAT TIREIf you have a flat tire, follow the instructionsbelow.

Stopping the vehicle

1. Safely move the vehicle off the road andaway from traffic.

2. Turn on the hazard warning flashers.

3. Park on a level surface and apply theparking brake. Shift the automatic trans-mission to ‘‘P’’.

4. Turn off the engine.

5. Raise the hood to warn other traffic, and tosignal professional road assistance per-sonnel that you need help.

6. Have all passengers get out of the vehicleand stand in a safe place, away from trafficand clear of the vehicle.

WARNING

O Make sure that the parking brakeis securely applied and the auto-matic transmission is shifted intoP (Park).

O Never change tires when the ve-hicle is on a slope, ice or slipperyareas. This is hazardous.

O Never change tires if oncomingtraffic is close to your vehicle.Wait for professional road assis-tance.

If needed, Roadside Assistance is available.Please refer to your Warranty Booklet orRoadside Assistance I.D. Card for the toll-freenumber to call.

IN CASE OF EMERGENCY

5-2

Z 96.12.20/ X

Getting the spare tire and tools

Jacking tools and spare tire are located insidethe trunk as illustrated.

If the spare tire clamp cannot be removedeasily, use the jack rod as shown.

Blocking wheels

Place suitable blocks at both the front andback of the wheel diagonally opposite the flattire to prevent the vehicle from rolling when itis jacked up.

SIE0015

SIE0002


5-3

Z 96.12.20/ X

WARNING

Be sure to block the wheel as thevehicle may move and cause per-sonal injury.

Jacking up and removing wheel

Carefully read the caution label at-tached to the jack body and the follow-ing instructions.

1. Place the jack directly under the jack-uppoint as illustrated above so that top of thejack contacts the vehicle at the jack uppoint. Align the center of both the jackhead and the notch at the jack up point asshown. Also fit the notched portion of thevehicle in the groove of the jack head asshown.

The jack should be used on level firmground.

2. Loosen each wheel nut one or two turns byturning counterclockwise with the wheel

nut wrench. Do not remove the wheelnuts until the tire is off the ground.

3. Carefully raise the vehicle until the tireclears the ground. To lift the vehiclesecurely hold the jack with both hands asshown above. Remove the wheel nuts, andthen remove the tire.

WARNING

O Never get under the vehicle whileit is supported only by the jack.

SIE0006

SIE0001


5-4

Z 96.12.20/ X

O Use the jack provided with yourvehicle. Do not use the jack pro-vided with your vehicle on othervehicles. The jack is designedonly for lifting your vehicle duringa tire change.

O Use the correct jack up points;never use any other part of thevehicle for jack support.

O Never jack up the vehicle morethan necessary.

O Never use blocks on or under thejack.

O Do not start or run engine whilevehicle is on the jack as it maycause the vehicle to move.

O Do not allow passengers to stayin the vehicle while it is on thejack.

O This model is equipped with alimited slip differential carrier;never run the engine with onerear wheel off the ground. It maycause the vehicle to move.

Installing wheel

1. Clean mud or dirt from the surface be-tween the wheel and hub.

2. Carefully put the wheel on and tighten thewheel nuts finger tight.

3. With the wheel nut wrench, tighten wheelnuts alternately and evenly until they aretight.

4. Lower the vehicle slowly until the tiretouches the ground. Then, with the wheelnut wrench, tighten the wheel nuts se-curely in the sequence as illustrated.

WARNING

O Incorrect wheel nuts or improp-

SIE0032


5-5

Z 96.12.20/ X

erly tightened wheel nuts cancause the wheel to become looseor come off. This could cause anaccident.

O Do not use oil or grease on thewheel studs or nuts. This couldcause the nuts to become loose.

O As soon as possible tighten thewheel nuts to the specified torquewith a torque wrench.

Wheel nut tightening torque:72 to 87 ft-lb(98 to 118 Nzm)

O Adjust tire pressure to the COLDpressure.

COLD pressure:

After vehicle has been parked forthree hours or more or driven less

than 1 mile (1.6 km).

COLD tire pressures are shown onthe tire placard located on the frontface of the rear left wheel housinginside the vehicle.

O Retighten the wheel nuts when thevehicle has been run for 600 miles(1,000 km) after installing an alumi-num wheel.

5. Securely store the spare tire and jackingequipment in the vehicle.

WARNING

O Always make sure that the sparetire and jacking equipment areproperly secured after use.Such items can become danger-ous projectiles in an accident orsudden stop.

O The T-type spare tire and smallsize spare tire are designed foremergency use. See specific in-structions under the heading‘‘Wheel and tire’’ in the ‘‘Do-it-yourself’’ section.

JUMP STARTINGTo start your engine with a booster battery,the instructions and precautions below mustbe followed.

SIE0016


5-6

Z 96.12.20/ X

WARNING

O If done incorrectly, jump startingcan lead to a battery explosion,resulting in severe injury ordeath. It could also damage yourvehicle.

O Explosive hydrogen gas is alwayspresent in the vicinity of the bat-tery. Keep all sparks and flamesaway from the battery.

O Do not allow battery fluid to comeinto contact with eyes, skin, clothor painted surfaces. Battery fluidis a corrosive sulphuric acid so-lution which can cause severeburns. If the fluid should comeinto contact with anything, imme-diately flush the contacted areawith water.

O Keep battery out of the reach ofchildren.

O The booster battery must be ratedat 12 volts. Use of an improperlyrated battery can damage yourvehicle.

O Whenever working on or near abattery, always wear suitable eyeprotectors (e.g., goggles or in-dustrial safety spectacles) and re-move rings, metal bands, or anyother jewelry. Do not lean overthe battery when jump starting.

O Do not attempt to jump start afrozen battery. It could explodeand cause serious injury.

O Your vehicle has an automaticengine cooling fan. It could comeon at any time. Keep hands andother objects away from it.

If needed, Roadside Assistance is available.Please refer to your Warranty InformationBooklet or Roadside Assistance I.D. Card forthe toll-free number to call.

Always follow the instructions below.Failure to do so could result in damageto the charging system and cause per-sonal injury.

SIE0017


5-7

Z 96.12.20/ X

1. If the booster battery is in another vehicle,position the two vehicles to bring theirbatteries into close proximity to eachother.

Do not allow the two vehicles totouch.

2. Apply parking brake. Move the selectorlever to ‘‘P’’. Switch off all unnecessaryelectrical systems (light, heater, air condi-tioner, etc.).

3. Remove vent caps on the battery (if soequipped). Cover the battery with an oldcloth to reduce explosion hazard.

4. Connect jumper cables in the sequence asillustrated.

CAUTION

O Always connect positive (+) topositive (+) and negative (−) tobody ground (e.g., strut mountingbolt, etc. — not to the battery).

O Make sure that cables do nottouch moving parts in the enginecompartment and that clamps donot contact any other metal.

5. Start the engine of the other vehicle and letit run for a few minutes.

6. Keep the engine speed of the other vehicleat about 2,000 rpm, and start your enginein the normal manner.

CAUTION

Do not engage the starter motor formore than 10 seconds. If the enginedoes not start right away, turn thekey off and wait 3 to 4 secondsbefore trying again.

7. After starting your engine, carefully dis-connect the negative cable and then thepositive cable.

8. Replace the vent caps (if so equipped). Besure to dispose of the cloth used to coverthe vent holes as it may be contaminatedwith corrosive acid.


5-8

Z 96.12.20/ X

PUSH STARTING

CAUTION

O This model cannot be pushstarted. This may cause transmis-sion damage.

O Three-way catalyst equippedmodels should not be started bypushing since the three-way cata-lyst may be damaged.

O Never try to start the vehicle bytowing it; when the engine starts,the forward surge could cause thevehicle to collide with the towvehicle.

If needed, Roadside Assistance is available.Please refer to your Warranty Booklet orRoadside Assistance I.D. Card for the toll-freenumber to call.

IF YOUR VEHICLE OVER-HEATSIf your vehicle is overheating (indicated by anextremely high temperature gauge reading), orif you feel a lack of engine power, detectabnormal noise, etc., take the following steps:

WARNING

O Do not continue to drive if yourvehicle overheats. Doing so couldcause a vehicle fire.

O To avoid the danger of beingscalded, never remove the radia-tor cap while the engine is stillhot. When the radiator cap isremoved, pressurized hot waterwill spurt out, possibly causingserious injury.

O Do not open the hood if steam iscoming out.

1. Move the vehicle safely off the road, applythe parking brake and move the selectorlever to ‘‘P’’.

Do not stop the engine.

2. Turn off the air conditioner switch. Openall the windows, move the heater or airconditioner temperature control to ‘‘maxi-mum hot’’ and fan control to ‘‘high speed’’.

3. If engine overheating is caused by climb-ing a long hill on a hot day, run the engineat a fast idle (approximately 1,500 rpm)until the temperature gauge indication re-turns to normal.

4. Get out of the vehicle. Look and listen forsteam or coolant escaping from the radiatorbefore opening the hood. Wait until no


5-9

Z 96.12.20/ X

steam or coolant can be seen before pro-ceeding.

5. Open the engine hood.

WARNING

If steam or water is coming from theengine, stand clear to prevent get-ting burned.

6. Visually check drive belts for damage orlooseness. Also check to make sure thecooling fan is running. The radiator hosesand radiator should not leak water. Ifcoolant is leaking, the cooling fan belt ismissing or loose, or the cooling fan doesnot run, stop the engine.

WARNING

O Be careful not to allow yourhands, hair, jewelry or clothing tocome into contact with, or to getcaught in, the running fan, belts,or motor fan.

O The fan motor can start at anytime when the coolant tempera-ture is high.

7. After the engine cools down, check thecoolant level in the reservoir tank with theengine running. Add coolant to the reser-voir tank if necessary. Have your vehiclerepaired at the nearest INFINITI dealer.

If needed, Roadside Assistance is avail-able. Please refer to your Warranty Infor-mation Booklet or Roadside AssistanceI.D. Card for the toll-free number to call.

TOW TRUCK TOWINGWhen towing your vehicle, all State (Provin-cial in Canada) and local regulations fortowing must be followed. Incorrect towingequipment could damage your vehicle. Tow-ing instructions are available from yourINFINITI dealer. Local service operators willgenerally be familiar with the applicable lawsand procedures for towing. To assure propertowing and to prevent accidental damage toyour vehicle, INFINITI recommends that youhave a service operator tow your vehicle. It isadvisable to have the service operator care-fully read the following precautions.

WARNING

O Never ride in a vehicle that isbeing towed.

O Never get under your vehicle afterit has been lifted by a tow truck.


5-10

Z 96.12.20/ X

CAUTION

O When towing, make sure that thetransmission, axles, steering sys-tem and power train are in work-ing condition. If any unit is dam-aged, a dolly must be used.

O When towing with the frontwheels on the ground:Turn theignition key to the ‘‘OFF’’ positionand secure the steering wheel ina straight- ahead position with arope or similar device. Neverplace the ignition key in the‘‘LOCK’’ position. This will resultin damage to the steering lockmechanism.

O Attach safety chains for alltowing.

If needed, Roadside Assistance is available.Please refer to your Warranty InformationBooklet or Roadside Assistance I.D. Card forthe toll-free number to call.

INFINITI recommends that your vehicle betowed with the driving (rear) wheels off theground as illustrated.

CAUTION

O If you have to tow an automatictransmission model with fourwheels on ground or with frontwheels raised (with rear wheelson ground), release the parkingbrake and move the select leverto the ‘‘N’’ position. Push the shiftlock release button to move theselect lever to neutral (‘‘N’’ posi-tion). Refer to ‘‘Driving with au-tomatic transmission’’ in the‘‘Starting and driving’’ section fordetails of the shift lock releasebutton usage.

Observe the following restrictedtowing speeds and distances.

ICE026M


5-11

Z 96.12.20/ X

Speed: Below 30 MPH (50 km/h)

Distance: Less than 40 miles (65km)

O If the speed or distance mustnecessarily be greater, removethe propeller shaft before towingto prevent damage to the trans-mission.

O Never tow an automatic transmis-sion model from the rear (i.e.,backward) with four wheels onthe ground as this may causeserious and expensive damage tothe transmission.

FREEING VEHICLE FROMSAND, SNOW OR MUD

O Use the towing hooks only as illustrated,not other parts of the vehicle. Otherwise,the vehicle body will be damaged.

O Use the towing hooks only to free avehicle stuck in sand, snow, mud, etc.Never tow the vehicle for a long distanceusing only the towing hooks.

O The towing hook is under tremendousforce when used to free a stuck vehicle.Always pull the cable straight out from thefront or rear of the vehicle. Never pull onthe hook at a sideways angle.

O Stand clear of a stuck vehicle.

WARNING

Do not spin your tires at high speed.This could cause them to explodeand result in serious injury. Parts ofyour vehicle could also overheat andbe damaged.

SIE0018


5-12

Z 96.12.20/ X

6 APPEARANCE AND CARE

Cleaning exterior and interior ..................... 6-2Corrosion protection .................................. 6-5

Z 96.12.20/ X

CLEANING EXTERIOR ANDINTERIORIn order to maintain the appearance of yourvehicle, it is important to take proper care ofit.

In the following cases, please wash yourvehicle as soon as possible to protect thepaint surface.

O After a rainfall to prevent possible damagefrom acid rain

O After driving on coastal roads

O When contaminants such as soot, birddroppings, tree sap, metal particles orbugs get on the paint surface

O When dust or mud builds up on thesurface

Whenever possible, store or park your vehicleinside a garage or in a covered area.

When it is necessary to park outside, park in

a shady area or protect the vehicle with a bodycover.

Be careful not to scratch the paintsurface when putting on or removingthe body cover.

Washing

Thoroughly rinse surface dirt off the vehiclewith a wet sponge and plenty of clean water.Clean the vehicle thoroughly using a mildsoap such as Nissan Car Wash, or a generalpurpose dishwashing liquid mixed with clean,lukewarm (never hot) water. Rinse the vehicleagain with plenty of clean water.

Inside flanges, seams and folds on the doors,hatches and hood are particularly vulnerableto the effects of road salt. Therefore, theseareas must be regularly cleaned. Make surethat the drain holes in the lower edge of thedoor are open. Spray water under the bodyand in the wheel wells to loosen the dirt andwash away road salt.

Avoid leaving water spots on the paint surfaceby using a damp chamois to dry the vehicle.

CAUTION

O Do not use strong householdsoap, strong chemical deter-gents, gasoline or solvents.

O Do not wash the vehicle in directsunlight or while the vehicle bodyis hot, as the surface may be-come water-spotted.

O Avoid using tight-napped or roughcloths, such as washing mitts.Care must be taken when remov-ing caked-on dirt or other foreignsubstances so that the paint sur-face is not scratched or damaged.

Waxing

If you wish to wax your vehicle, only use a wax

APPEARANCE AND CARE

6-2

Z 96.12.20/ X

specified for use over clear coats, such asNissan Liquid or Spray Wax, because yourINFINITI has been finished with the finest paintand hard clear coats. Your INFINITI dealer canassist you in choosing the proper product.

O Wax your vehicle only after a thoroughwashing. Follow the instructions suppliedwith the wax.

O Do not use a wax containing any abra-sives, cutting compounds or cleaners thatmay damage the vehicle finish.

O If the surface does not polish easily, use a‘‘road tar’’ remover and wax again.

Machine compound or aggressive pol-ishing on a base coat/clear coat paintfinish may dull the finish or leave swirlmarks.

Removing spots

Remove tar and oil spots, industrial dust,insects, and tree sap as quickly as possible

from the paint surface to avoid lasting damageor staining. Special cleaning products areavailable at your INFINITI dealer or automotiveaccessory stores.

Underbody

In areas where road salt is used in winter, theunderbody must be cleaned regularly. Thiswill prevent dirt and salt from building up andcausing underbody and suspension corrosion.Before the winter period and again in thespring, the underseal must be checked and, ifnecessary, re-treated.

Cleaning glass

When cleaning the rear window, it may beeasier to clean if the high-mounted stop lightis removed first.

Be careful when removing the high-mountedstop light to reduce the risk of damaging thehigh-mounted stop light wires.

SIA0006A

APPEARANCE AND CARE

6-3

Z 96.12.20/ X

The high-mounted stop light must be properlyreinstalled before driving your vehicle.

Use glass cleaner to remove smoke and dustfilm from the glass surfaces. It is normal forglass to become coated with a film after thevehicle is parked in the hot sun. Glass cleanerand a soft cloth will easily remove this film.

CAUTION

When cleaning the inside of thewindow, do not use sharp-edgedtools, abrasive cleaners or chlorinebased disinfectant cleaners. Theycould damage the rear windowdefroster.

Cleaning aluminum alloy wheels

Wash regularly, especially during wintermonths in areas where road salt is used. Saltcould discolor the wheel if not removed.

Chrome parts

Clean chrome parts regularly with a non-abrasive chrome polish to maintain the finish.

Bumpers and foldable mirrors

INFINITI recommends bumpers and foldablemirror housings be waxed with a non-abrasivewax from time to time to maintain appearance.

Cleaning interior

Occasionally remove loose dust from theinterior trim, plastic parts and seats using avacuum cleaner or soft brush. Wipe the vinyland leather surfaces with a clean, soft clothdampened in mild soap solution, then wipeclean with a dry soft cloth. Before using anyfabric protector, read the manufacturer’s rec-ommendations. Some fabric protectors con-tain chemicals that may stain or bleach theseat material.

CAUTION

O Never use benzine, thinner, orany similar material.

O The leather seats should be regu-larly coated with a leather waxlike saddle soap. Never use carwax.

O Never use fabric protectors un-less recommended by themanufacturer.

APPEARANCE AND CARE

6-4

Z 96.12.20/ X

Floor mat positioning aid

This model includes a front floor mat bracketto act as a floor mat positioning aid. INFINITIfloor mats, specially designed for your ve-hicle, incorporate grommets. To install, sim-ply position the mat using the floor matbracket hook through the floor mat grommethole while centering the mat in the floor pancontour.

Periodically check to make certain that themats are properly positioned.

Floor mats

The use of genuine floor mats can extend thelife of your vehicle carpet and make it easier toclean the interior. No matter what matsare used, be sure they are fitted foryour vehicle and are properly posi-tioned in the footwell to prevent inter-ference with pedal operation. Matsshould be maintained with regular clean-ing and replaced if they become exces-sively worn.

Seat belts

The seat belts can be cleaned by wiping themwith a sponge dampened in a mild soapsolution. Allow the belts to dry completelybefore using them.

WARNING

Do not allow wet belts to roll up in

the retractor. NEVER use bleach,dye, or chemical solvents sincethese may severely weaken the seatbelt webbing.

CORROSION PROTECTION

Most common factors contribut-ing to vehicle corrosion:

1. The accumulation of moisture-retainingdirt and debris in body panel sections,cavities, and other areas.

2. Damage to paint and other protectivecoatings caused by gravel and stone chipsor minor traffic accidents.

Environmental factors influencethe rate of corrosion:

Moisture

Accumulation of sand, dirt and water on thevehicle body underside can accelerate corro-

SIA0007

APPEARANCE AND CARE

6-5

Z 96.12.20/ X

sion. Wet floor coverings will not dry com-pletely inside the vehicle, and should beremoved for drying to avoid floor panelcorrosion.

Relative humidity

Corrosion will be accelerated in areas of highrelative humidity, especially those areas wherethe temperatures stay above freezing whereatmospheric pollution exists, or where roadsalt is used.

Temperature

A temperature increase will accelerate the rateof corrosion to those parts which are not wellventilated.

Air pollution

Industrial pollution, the presence of salt in theair in coastal areas, or heavy road salt use willaccelerate the corrosion process. Road saltwill also accelerate the disintegration of paintsurfaces.

To protect your vehicle fromcorrosion:

O Wash your vehicle often to keep thevehicle clean.

O Always check for minor damage to thepaint and repair it as soon as possible.

O Keep drain holes at the bottom of thedoors open to avoid water accumulation.

O Check the underbody for accumulation ofsand, dirt or salt. If present, wash withwater as soon as possible.

CAUTION

O NEVER remove dirt, sand or otherdebris from the passenger com-partment by washing it out with ahose. Remove dirt with a vacuumcleaner or broom.

O Never allow water or other liquidsto come in contact with electroniccomponents inside the vehicle asthis may damage them.

O See your INFINITI dealer forassistance.

APPEARANCE AND CARE

6-6

Z 96.12.20/ X

7 DO-IT-YOURSELF

Maintenance precautions ............................ 7-2Check locations in engine compartment .... 7-4Engine cooling system ............................... 7-5Engine oil ................................................... 7-7Automatic transmission fluid ................... 7-10Power steering fluid ................................. 7-12Brake fluid ................................................ 7-13Window washer fluid ............................... 7-14Battery ...................................................... 7-14Drive belts ................................................ 7-16

Spark plug replacement ........................... 7-16Air cleaner ................................................ 7-17Wiper blade .............................................. 7-17Parking brake ........................................... 7-19Brake pedal ............................................... 7-20Brake booster ........................................... 7-20Fuses ........................................................ 7-21Fusible links .............................................. 7-22Light bulbs ............................................... 7-23Wheels and tires ...................................... 7-30

Z 96.12.20/ X

MAINTENANCE PRECAU-TIONSWhen performing any inspection or mainte-nance work on your vehicle, always take careto prevent serious accidental injury to yourselfor damage to the vehicle. The following aregeneral precautions which should be closelyobserved.

WARNING

O Park the vehicle on a level surface,apply the parking brake securelyand block the wheels to prevent thevehicle from moving. Move the se-lector lever to P (Park).

O Be sure the ignition key is ‘‘OFF’’or ‘‘LOCK’’ when performing anyparts replacement or repairs.

O Your vehicle is equipped with anautomatic engine cooling fan. Itmay come on at any time withoutwarning, even if the ignition keyis in the OFF position and theengine is not running. To avoidinjury, always disconnect thenegative battery cable beforeworking near the fan.

O If you must work with the enginerunning, keep your hands, clothing,hair and tools away from movingfans, belts and any other movingparts.

O It is advisable to remove necktieand any jewelry, such as rings,watches, etc. before working onyour vehicle.

O If you must run the engine in anenclosed space such as a garage,be sure there is proper ventilationfor exhaust gases.

O Never get under the vehicle whileit is supported only by a jack. If itis necessary to work under thevehicle, support it with safetystands.

O Keep smoking materials, flameand sparks away from fuel andthe battery.

O The fuel filter or fuel lines shouldbe serviced by an INFINITI dealerbecause the fuel lines are underhigh pressure even when the en-gine is off.

DO-IT-YOURSELF

7-2

Z 96.12.20/ X

CAUTION

O Do not work under the hood whilethe engine is hot. Turn off theengine and wait until it coolsdown.

O Never connect or disconnect ei-ther the battery or any transistor-ized component connector whilethe ignition key is on.

O Never leave the engine or theautomatic transmission relatedcomponent harness connectordisconnected while the ignition ison.

O Avoid direct contact with usedengine oil. Improperly disposed

motor oil and/or other vehicle flu-ids can hurt the environment. Al-ways conform to local regulationsfor disposal of vehicle fluid.

This ‘‘Do-it-yourself’’ section gives instruc-tions regarding only those items which arerelatively easy for most owners to perform.More involved service should be done by yourINFINITI dealer.

You should be aware that incomplete orimproper servicing may result in operatingdifficulties or excessive emissions, and couldaffect your warranty coverage. If in doubtabout any servicing, have it done byyour INFINITI dealer.

DO-IT-YOURSELF

7-3

Z 96.12.20/ X

CHECK LOCATIONS IN ENGINE COMPARTMENT

SID0128

DO-IT-YOURSELF

7-4

Z 96.12.20/ X

ENGINE COOLING SYSTEMThe engine cooling system is filled at thefactory with a high-quality, year-round, anti-freeze coolant solution. The anti-freeze solu-tion contains rust and corrosion inhibitors,therefore additional cooling system additivesare not necessary.

CAUTION

When adding or replacing coolant,use only an ethylene glycol anti-freeze with the proper mixture ratioof 50% anti-freeze and 50% distilledwater.

Outsidetemperature

down toAnti-

freezeDistilledwater

°C °F

−35 −30 50% 50%

The use of other types of coolantsolutions may damage your enginecooling system.

WARNING

O Never remove the radiator capwhen the engine is hot. Seriousburns could be caused by highpressure fluid escaping from theradiator. Wait until the engineand radiator cool down. See pre-cautions in ‘‘If your vehicleoverheats’’ found in the ‘‘In caseof emergency’’ section.

O The radiator is equipped with apressure cap. Use a genuine capwhen replacement is required.

CHECKING ENGINE COOLANTLEVEL

Check the coolant level in the reservoir tankwhen the engine is cold. If the coolant level isbelow ‘‘MIN’’, add coolant up to the ‘‘MAX’’level. If the reservoir tank is empty, check thecoolant level in the radiator when the en-gine is cold. If there is insufficient coolant inthe radiator, fill the radiator with coolant up tothe filler opening and also add it to thereservoir tank up to the ‘‘MAX’’ level.

If the cooling system requires coolant

SID0059

DO-IT-YOURSELF

7-5

Z 96.12.20/ X

frequently, have it checked by yourINFINITI dealer.

CHANGING ENGINE COOL-ANT

O Major cooling system repairs should beperformed by your INFINITI dealer. Theservice procedures can be found in theappropriate INFINITI Service Manual.

O Improper servicing can result in reducedheater performance and engine overheat-ing.

WARNING

O To avoid the danger of beingscalded, never change the cool-ant when the engine is hot.

O Never remove the radiator capwhen the engine is hot. Seriousburns could be caused by high

pressure fluid escaping from theradiator.

1. Park the vehicle in the shade and set theair conditioner temperature control to themaximum hot temperature after turning theignition key to the ‘‘ON’’ position.

2. Open the radiator filler cap and drain valve.

SID0060A

SID0061

DO-IT-YOURSELF

7-6

Z 96.12.20/ X

Open the drain plugs on both sides of theengine block.

3. Flush the cooling system by running freshwater through the radiator.

4. Close both drain plugs securely.

5. See the ‘‘Technical information’’ section forcooling system capacity. Fill the radiator

slowly with the proper mixture of coolantand water. Fill the reservoir tank up to the‘‘MAX’’ level. Then install the radiator fillercap.

6. Start the engine and warm it up until itreaches normal operating temperature.Then race the engine 2 or 3 times under noload. Watch the coolant temperature gaugefor signs of overheating.

7. Stop the engine. After it completelycools down, refill the radiator up to thefiller opening. Fill the reservoir tank up tothe ‘‘MAX’’ level.

8. Check the drain valve for any sign ofleakage.

ENGINE OIL

CHECKING ENGINE OILLEVEL

1. Park the vehicle on a level surface andapply parking brake.

2. Run the engine until it reaches operatingtemperature.

3. Turn off the engine. Wait more than 15minutes for the oil to drain back intothe oil pan.

SID0062

SID0063

DO-IT-YOURSELF

7-7

Z 96.12.20/ X

4. Remove the dipstick and wipe it clean.Reinsert it all the way.

5. Remove the dipstick again and check theoil level. It should be between the ‘‘H’’ and‘‘L’’ marks. If the oil level is below the ‘‘L’’mark, remove the oil filler cap and pourrecommended oil through the opening. Donot overfill.

6. Recheck oil level with dipstick.

It is normal to add some oil between oilmaintenance intervals or during the

break-in period, depending on the se-verity of operating conditions.

CAUTION

Oil level should be checked regu-larly. Operating with insufficientamount of oil can damage the en-gine, and such damage is not cov-ered by warranty.

CHANGING ENGINE OIL

1. Park the vehicle on a level surface andapply the parking brake.

2. Run the engine until it reaches operatingtemperature, and then turn it off.

3. Turn the engine off and wait more than 10minutes.

4. Place a large drain pan under the drainplug.

5. Remove the oil filler cap.

SID0064

SID0065

DO-IT-YOURSELF

7-8

Z 96.12.20/ X

6. Remove the drain plug with a wrench andcompletely drain the oil.

If oil filter is to be changed, remove andreplace it at this time. See ‘‘Changing theoil filter’’.

CAUTION

Be careful not to burn yourself. Theengine oil will be hot.

Waste oil must be disposed of prop-erly. Check your local regulations.

7. Clean and re-install the drain plug andwasher. Tighten the drain plug with awrench.

Drain plug tightening torque:22 to 29 ft-lb(29 to 39 Nzm)

Do not use excessive force.

8. Refill the engine with recommended oiland install the cap securely.

See the ‘‘Technical information’’ section foroil type and refill capacity.

9. Start the engine.

Check for leakage around the drain plug.Correct as required.

10.Turn the engine off and wait more than 15minutes. Check the oil level. Add engineoil if necessary.

11.Dispose of waste oil in the proper manner.

WARNING

O Prolonged and repeated contactwith used engine oil may causeskin cancer.

O Try to avoid direct skin contactwith used oil. If skin contact ismade, wash thoroughly with soapor hand cleaner as soon as pos-sible.

O Keep used engine oil out of reachof children.

DO-IT-YOURSELF

7-9

Z 96.12.20/ X

CHANGING ENGINE OIL FIL-TER

1. Park the vehicle on a level surface andapply the parking brake.

2. Turn the engine off.

3. Loosen the oil filter with an oil filterwrench. Remove the oil filter by turning itby hand.

CAUTION

Be careful not to burn yourself. Theengine oil will be hot.

4. Wipe the engine oil filter mounting surfacewith a clean rag.

Be sure to remove any old rubber gasketremaining on the mounting surface of theengine.

5. Coat the rubber gasket on the new filterwith clean engine oil.

6. Screw in the oil filter until a slight resis-tance is felt, then tighten additionally morethan 2/3 turn.

7. Start the engine and check for leakagearound the oil filter. Correct as required.

Check the oil level. Add engine oil as neces-sary.

AUTOMATIC TRANSMIS-SION FLUID

WARNING

O When the engine is running, keephands, jewelry and clothing awayfrom any moving parts such ascooling fan, and drive belt.

O Automatic transmission fluid ispoisonous and should be storedcarefully in marked containersout of the reach of children.

TEMPERATURE CONDITIONSFOR CHECKING

O The fluid level should be checked usingthe ‘‘HOT’’ range on the dipstick after thefollowing conditions have been met:

— The engine should be warmed up to

SID0066

DO-IT-YOURSELF

7-10

Z 96.12.20/ X

operating temperature.

— The vehicle should be driven at least 5minutes.

— The automatic transmission fluid shouldbe warmed to between 122 and 176°F (50and 80°C).

O The fluid can be checked at fluid tempera-tures of 86 to 122°F (30 to 50°C) usingthe ‘‘COLD’’ range on the dipstick after theengine is warmed up and before driving.However, the fluid should be re-checkedusing the ‘‘HOT’’ range.

1. Park the vehicle on a level surface and setthe parking brake.

2. Start the engine and then move the selec-tor lever through each gear range endingin ‘‘P’’.

3. Check the fluid level with the engineidling.

4. Remove the dipstick and wipe it clean withlint-free paper.

5. Reinsert the dipstick into the charging pipeas far as it will go.

6. Remove the dipstick and note the reading.

SID0129 SID0130

DO-IT-YOURSELF

7-11

Z 96.12.20/ X

If the level is at the low side of eitherrange, add fluid to the charging pipe.

CAUTION

DO NOT OVERFILL.USE ONLY Nissan Matic ‘‘D’’ (Con-tinental U.S. and Alaska) or GenuineNissan Automatic TransmissionFluid (Canada). DexronTMIII/MerconTM or equivalent may also beused. Outside the continental UnitedStates and Alaska contact a INFINITIdealer for more information regard-ing suitable fluids, including recom-mended brand(s) of DexronTM

III/MerconTM or DexronTM

IIE/MerconTM Automatic Transmis-sion Fluid.

NOTE:

If the vehicle has been driven for a longtime at high speeds, or in city traffic inhot weather, or if it is being used topull a trailer, an accurate fluid levelcannot be read. You should wait untilthe fluid has cooled down (about 30minutes).

POWER STEERING FLUID

The fluid level should be checked using the‘‘HOT’’ range on the dipstick at fluid tempera-ture of 122 to 176°F (50 to 80°C) or using the‘‘COLD’’ range on the dipstick at fluid tem-perature of 32 to 86°F (0 to 30°C).

SID0131

DO-IT-YOURSELF

7-12

Z 96.12.20/ X

CAUTION

O Do not overfill.

O Recommended fluid is typeDEXRONTMIIE, DEXRONTMIII orequivalent.

BRAKE FLUID

Check the fluid level in the reservoir. If thefluid is below the Min. line or the brakewarning light comes on, add DOT 3 fluid upto the Max. line. If fluid must be addedfrequently, the system should be checked byyour INFINITI dealer.

WARNING

Use only new fluid. Old, inferior, orcontaminated fluid may damage thebrake system. The use of improperfluids can damage the brake systemand affect the vehicle’s stoppingability.

CAUTION

Do not spill the fluid on paintedsurfaces. This will damage thepaint. If fluid is spilled, wash withwater.

SID0069

DO-IT-YOURSELF

7-13

Z 96.12.20/ X

WINDOW WASHER FLUID

Add fluid when the low washer fluid warninglight comes on. Add a washer solvent to thewater for better cleaning. In the winter season,add a windshield washer anti-freeze. Followthe manufacturer’s instructions for the mixtureratio.

CAUTION

Do not substitute engine anti-freezecoolant for window washer solution.This may result in damage to thepaint.

BATTERYO Keep the battery surface clean and dry. Any

corrosion should be washed off with asolution of baking soda and water.

O Make certain the terminal connections areclean and securely tightened.

O If the vehicle is not to be used for 30 daysor longer, disconnect the ‘‘—’’ negativebattery terminal cable to prevent discharge.

WARNING

O Do not expose the battery toflames or electrical sparks. Hy-drogen gas generated by batteryaction is explosive. Do not allowbattery fluid to contact your skin,eyes, fabrics, or painted sur-faces. After touching a battery orbattery cap, do not touch or rubyour eyes. Thoroughly wash yourhands. If the acid contacts youreyes, skin or clothing, immedi-ately flush with water for at least15 minutes and seek medical at-tention.

O When working on or near a bat-tery, always wear suitable eyeprotection and remove alljewelry.

SID0070

DO-IT-YOURSELF

7-14

Z 96.12.20/ X

O Keep the battery out of the reachof children.

Check the fluid level in each cell (Remove thebattery cover if it is necessary). It should bebetween the MAX. and MIN. lines.

If it is necessary to add fluid, add onlydistilled water to bring the level to theindicator in each filler opening. Do notoverfill.

1. Remove the cell plugs.

2. Add distilled water up to the MAX. level.

3. Install the cell plugs.

Indicator

Check if the indicator in each filler openingindicates ‘‘OK’’ (outer circle is blue and centercircle is red).

If it indicates ‘‘ADD WATER’’ (outer circle isred and center circle is white), add only

distilled water in each filler opening. Do notoverfill.

If it indicates ‘‘CHARGING NECESSARY’’(outer circle is white and center circle is red),the battery needs to be charged.

WARNING

Do not overcharge and do not exposethe battery to flames or electricalsparks when charging.

JUMP STARTING

If jump starting is necessary, see the ‘‘In caseof emergency’’ section. If the engine does notstart by jump starting, the battery may have tobe replaced. Contact your INFINITI dealer.

SID0114 SID0115

DO-IT-YOURSELF

7-15

Z 96.12.20/ X

DRIVE BELTSWARNING

Be sure the ignition key is ‘‘OFF’’.The engine could rotate unexpect-edly.

1. Visually inspect each belt for signs ofunusual wear, cuts, fraying or looseness. Ifthe belt is in poor condition or loose, haveit replaced or adjusted by your INFINITIdealer.

2. Have the belts checked regularly for con-dition and tension in accordance with themaintenance schedule in this manual.

SPARK PLUG REPLACE-MENT

Platinum-tipped spark plugs

It is not necessary to replace the platinum-tipped spark plugs as frequently as the con-ventional type spark plugs since they will lastmuch longer. Follow the maintenance sched-ule, but do not reuse them by cleaning orregapping.

If replacement is required, see your INFINITIdealer for servicing.

SID0071

IDI072M

DO-IT-YOURSELF

7-16

Z 96.12.20/ X

WARNING

Be sure the engine and ignitionswitch are off and that the parkingbrake is engaged securely.

CAUTION

Be sure to use the correct wrench toremove the plugs. An incorrectwrench can cause damage.

Always replace spark plugs with recom-mended or equivalent ones.

AIR CLEANER

Viscous paper type

The filter element should not be cleaned andreused. Replace it according to the mainte-nance intervals shown in the ‘‘Maintenance’’section. When replacing the filter, wipe theinside of the air cleaner housing and the coverwith a damp cloth.

WARNING

Operating the engine with the aircleaner off can cause you or othersto be burned. The air cleaner notonly cleans the air, it stops flame ifthe engine backfires. If it isn’t there,and the engine backfires, you couldbe burned. Don’t drive with it off,and be careful working on the enginewith the air cleaner off.

WIPER BLADE1) CLEANING

If your windshield is not clear after usingthe windshield washer or if a wiper bladechatters when running, wax or other ma-terial may be on the blade or windshield.

SID0072

DO-IT-YOURSELF

7-17

Z 96.12.20/ X

Clean the outside of the windshield with awasher solution or a mild detergent. Yourwindshield is clean if beads do not formwhen rinsing with clear water.

Clean the blade by wiping it with a clothsoaked in a washer solution or a milddetergent. Then rinse the blade with clearwater. If your windshield is still not clearafter cleaning the blades and using thewiper, replace the blades.

2) REPLACEMENT

1. Turn the ignition switch to the ‘‘ACC’’ or‘‘ON’’ position and the windshield wiperswitch ‘‘ON’’. Turn the ignition switch‘‘OFF’’ when the wiper is in the fully upposition. The wiper will stop as illustrated.

The wiper should be in the fully upposition to avoid scratching the enginehood or wiper arm. 2. Pull the wiper arm.

3. Push the lock pin, then remove the wiperblade.

SID0121

IDI018M

DO-IT-YOURSELF

7-18

Z 96.12.20/ X

4. Insert the new wiper blade onto the wiperarm until a click sounds.

CAUTION

After wiper blade replacement, re-turn the wiper arm to its originalposition.

Otherwise it may be damaged whenthe engine hood is opened.

Make sure the wiper blade contactsthe glass, otherwise the arm may bedamaged from wind pressure.

If you wax the surface of the hood, becareful not to let wax get into thewasher nozzle. This may cause clog-ging or improper windshield washeroperation. If wax gets into the nozzle,remove it with a needle or small pin.

PARKING BRAKE

From the released position, depress the park-ing brake pedal slowly and firmly, and checkthe distance between the initial and finalposition of the pedal. If it is out of the rangeshown above, see your INFINITI dealer.

SID0036

IDI070MA

DO-IT-YOURSELF

7-19

Z 96.12.20/ X

BRAKE PEDALWith the engine running, check the distancebetween the upper surface of the pedal and themetal floor. If it is out of the range shownabove, see your INFINITI dealer.

Self-adjusting brakes

Your vehicle is equipped with self-adjustingbrakes.

The disc-type brakes self-adjust every time thebrake pedal is applied.

WARNING

See your INFINITI dealer for a brakesystem check if the brake pedalheight does not return to normal.

Brake pad wear indicators

The disc brake pads on your vehicle haveaudible wear indicators. When a brake padrequires replacement, it will make a highpitched scraping or screeching sound whenthe vehicle is in motion whether or not thebrake pedal is depressed. Have the brakeschecked as soon as possible if the wearindicator sound is heard.

Under some driving or climate conditions,occasional brake squeak, squeal or othernoise may be heard. Occasional brake noiseduring light to moderate stops is normal and

does not affect the function or performance ofthe brake system.

The rear drum brakes (if so equipped) do nothave audible wear indicators. Should you everhear an unusually loud noise from the reardrum brakes, have them inspected as soon aspossible by your INFINITI dealer.

Proper brake inspection intervalsshould be followed. For more informa-tion regarding brake inspections, see theappropriate maintenance schedule infor-mation in the ‘‘Maintenance Schedule’’section of this manual.

BRAKE BOOSTERCheck the brake booster function as follows:

1. With the engine off, press and release thebrake pedal several times. When brakepedal movement (distance of travel) re-mains the same from one pedal applicationto the next, continue on to the next step.

IDI071MA

DO-IT-YOURSELF

7-20

Z 96.12.20/ X

2. While depressing the brake pedal, start theengine. The pedal height should drop alittle.

3. With the brake pedal depressed, stop theengine. Keeping the pedal depressed forabout 30 seconds, the pedal height shouldnot change.

4. Run the engine for one minute withoutdepressing the brake pedal, then turn it off.Depress the brake pedal several times. Thepedal travel distance will decrease gradu-ally with each depression as the vacuum isreleased from the booster.

If the brakes do not operate properly, see yourINFINITI dealer.

FUSES

CAUTION

Never use a fuse of higher amperagerating than that specified on the fusebox cover. This could damage theelectrical system or cause a fire.

Engine compartment

If any electrical equipment does not operate,

check for an open fuse.

1. Be sure the ignition key and the headlightswitch are ‘‘OFF’’.


3. Remove the fuse box cover jA .

4. Remove the fuse with the fuse puller.

5. If the fuse is open, replace it with a newfuse.

6. If a new fuse opens again, have theelectrical system checked and repaired byyour INFINITI dealer.

SID0132

DO-IT-YOURSELF

7-21

Z 96.12.20/ X

Passenger compartment

If any electrical equipment does not operate,check for an open fuse.

1. Be sure the ignition key and the headlightswitch are ‘‘OFF’’.

2. Open the fuse box cover.

3. Remove the fuse with the fuse puller.

4. If the fuse is open, replace it with a newfuse.

5. If a new fuse opens again, have theelectrical system checked and repaired byyour INFINITI dealer.

FUSIBLE LINKS

If any electrical equipment does not operateand fuses are in good condition, check thefusible links. If any of these fusible links aremelted, replace only with genuine parts. Seeyour INFINITI dealer.

SID0075 SID0076

DO-IT-YOURSELF

7-22

Z 96.12.20/ X

LIGHT BULBSHEADLIGHTS

The headlight is a semi-sealed beam typewhich uses a replaceable headlight (halogen)bulb. A bulb can be replaced from inside theengine compartment without removing theheadlight assembly.

CAUTION

High pressure halogen gas is sealedinside the bulb. The bulb may breakif the glass envelope is scratched orthe bulb is dropped.

Hold the plastic base when handlingthe bulb. Never touch the glass en-velope.

Replacing the headlight bulb


2. Disconnect the battery negative cable.

3. Remove the air cleaner box for left side

headlight bulb replacement or the batteryfor right side headlight bulb replacement.

4. Turn the bulb cover counterclockwise,then remove it.

5. Disconnect the bulb connector.

6. Push and turn the retaining pin to loosenit.

7. Remove the headlight bulb. Do not shakeor rotate the bulb when removing it.

8. Install the new bulb in the reverse order ofremoval.

CAUTION

DO NOT TOUCH THE BULB.

O Use the same number and watt-age as originally installed:

SID0077

DO-IT-YOURSELF

7-23

Z 96.12.20/ X

High/Low beam

Wattage(W)

60/55

Bulb no. HB2

O Aiming is not necessary after re-placing the bulb. When aimingadjustment is necessary, contactyour INFINITI dealer.

O Do not leave the bulb out of theheadlight reflector for a long pe-riod of time as dust, moisture,and smoke may enter the head-light body and affect the per-formance of the headlight.

Adjusting the headlight aim

Before adjusting the headlights, make surethat all of the tires are properly inflated, thevehicle is on level ground and there is no

excess weight in the vehicle that would effectthe level of the vehicle.

First, open the hood.

You will see two gauges on the headlight. Thegauge on the side further away from theengine is the horizontal gauge. The gauge thatis closer to the engine is the vertical gauge.

The vertical gauge adjustment screw is abovethe headlight. The air bubble in this gaugeshould be centered on the ‘‘j’’ mark. Thiscan be done with a Phillips screwdriver. Turn

the adjustment screw clockwise and the head-light beam will raise, moving the air bubble inthe gauge forward. Turn the adjustment screwcounterclockwise and the headlight beam willlower, moving the air bubble backward.

The horizontal gauge adjustment gear is abovethe headlight. The inner red line should alignwith the indicator line. This can be done witha Phillips screwdriver as illustrated. Turn thePhillips screwdriver clockwise to turn theheadlight beam toward the inside of thevehicle, and turn it counterclockwise to turn

SID0078

SID0001

DO-IT-YOURSELF

7-24

Z 96.12.20/ X

the headlight beam toward the outside of thevehicle.

OTHER LIGHTS

Item Wattage (W) Bulb No.Front turn signal/side marker/parkinglight 27/8 1157NA

Rear combination lightstop/tail 21/5 7443turn signal 21 7440tail 5 168back-up light 21 7440

License plate light 5 168High-mounted stop light 18 —Front personal light 8 —Rear personal light 8 —Vanity mirror light 1.4 —Step light 2.7 158Footwell light 3.4 158Trunk light 3.4 158Front fog light 55 H3

DO-IT-YOURSELF

7-25

Z 96.12.20/ X

SID0053A

DO-IT-YOURSELF

7-26

Z 96.12.20/ X

Replacement procedures

All other lights are either type A, B, C, D, E orF . When replacing a bulb, first remove thelens and/or cover.

SID0116

DO-IT-YOURSELF

7-27

Z 96.12.20/ X

SID0079

DO-IT-YOURSELF

7-28

Z 96.12.20/ X

SID0080

DO-IT-YOURSELF

7-29

Z 96.12.20/ X

WHEELS AND TIRESIf you have a flat tire, see ‘‘In case ofemergency’’ section.

Maximum inflation pressure

Do not exceed the maximum inflation pres-sures shown on the side wall of the tire.

Tire inflation pressure

Periodically check the tire pressure (includingspare). Incorrect tire pressure may adverselyaffect tire life and vehicle handling. Tire pres-

sure should be checked when the tires areCOLD. Tires are considered COLD after thevehicle has been parked for three or morehours, or driven less than 1 mile (1.6 km).COLD tire pressures are shown on the tireplacard located on the front face of the rear leftwheel housing inside the vehicle.

WARNING

O The vehicle weight capacity isindicated on the tire placard. Donot load your vehicle beyond thiscapacity. Overloading your ve-hicle may result in reduced tirelife, unsafe operating conditionsdue to premature tire failure, orunfavorable handling characteris-tics and could also lead to aserious accident. Loading beyondthe specified capacity may

SID0117

IDI002

DO-IT-YOURSELF

7-30

Z 96.12.20/ X

also result in failure of other ve-hicle components.

O Before taking a long trip, orwhenever you have loaded yourvehicle heavily, use a tire pres-sure gauge to ensure that the tirepressure is at the specified level.

O Do not drive your vehicle over 85MPH (140 km/h) unless it isequipped with high speed capa-bility tires. Driving faster than 85MPH (140 km/h) may result in tirefailure, loss of control and pos-sible injury.

Types of tires

CAUTION

When changing or replacing tires,be sure all four tires are of the sametype (i.e., Summer, All Season orSnow) and construction. YourINFINITI dealer may be able to helpyou with information about tire type,size, speed rating and availability.Replacement tires may have a lowerspeed rating than the factoryequipped tires, and may not matchthe potential maximum vehiclespeed. Never exceed the maximumspeed rating of the tire.

All season tires

INFINITI specifies All Season tires on somemodels to provide good performance for useall year around, including snowy and icy roadconditions. All Season Tires are identified by‘‘ALL SEASON’’ and/or ‘‘M&S’’ on the tiresidewall. Snow tires have better snow tractionthan All Season tires and may be moreappropriate in some areas.

Summer tires

Summer tire performance in snow and ice willbe substantially reduced. Summer tires do nothave the tire traction rating ‘‘M&S’’ on the tiresidewall.

If you plan to operate your vehicle in snowy oricy conditions, INFINITI recommends the useof ‘‘SNOW’’ or ‘‘ALL SEASON’’ tires on all fourwheels.

Snow tires

If snow tires are needed, it is necessary to

DO-IT-YOURSELF

7-31

Z 96.12.20/ X

select tires equivalent in size and load ratingto the original equipment tires. If you do not,it can adversely affect the safety and handlingof your vehicle.

Generally, snow tires will have lower speedratings than factory equipped tires and maynot match the potential maximum vehiclespeed. Never exceed the maximum speedrating of the tire.

For additional traction on icy roads, studdedtires may be used. However, some provincesand states prohibit their use. Check local,state and provincial laws before installingstudded tires. Skid and traction capabilities ofstudded snow tires, on wet or dry surfaces,may be poorer than that of non-studded snowtires.

Tire chains

Use of tire chains may be prohibited accord-ing to location. Check the local laws beforeinstalling tire chains. When installing tire

chains, make sure they are of proper size forthe tires on your vehicle and are installedaccording to the chain manufacturer’s sugges-tions. Use only SAE Class ‘‘S’’ chains.Other types may damage your vehicle. Usechain tensioners when recommended by thetire chain manufacturer to ensure a tight fit.Loose end links of the tire chain must besecured or removed to prevent the possibilityof whipping action damage to the fenders orunderbody. If possible, avoid fully loadingyour vehicle when using tire chains. In addi-tion, drive at a reduced speed. Otherwise, yourvehicle may be damaged and/or vehicle han-dling and performance may be adverselyaffected.

Never install tire chains on T-type spare tires.Do not use the chains on dry roads.

Tire rotation

INFINITI recommends that tires be rotatedevery 7,500 miles (12,000 km).

Wheel nut tightening torque:72 to 87 ft-lb(98 to 118 Nzm)

See ‘‘Flat tire’’ in the ‘‘In case of emergency’’section for tire replacing procedures.

IDI069M

DO-IT-YOURSELF

7-32

Z 96.12.20/ X

WARNING

O After rotating the tires, adjust thetire pressure.

O Retighten the wheel nuts any timeafter the aluminum wheels havebeen run for the first 600 miles(1,000 km).

O Do not include the T-type sparetire or any other small size sparetire in the tire rotation.

Tire wear and damage

WARNING

O Tires should be inspected peri-odically for wear, cracking, bulg-ing, or objects caught in thetread. If excessive wear, cracks,bulging, or deep cuts are found,the tire should be replaced.

O The original tires have a built-intread wear indicator. When thewear indicator is visible, the tireshould be replaced.

O Improper service for a T-typespare tire may result in seriouspersonal injury. If it is necessaryto repair the T-type spare tire,contact your INFINITI dealer.

Changing tires and wheels

When replacing a tire, use the same size andload carrying capacity as the original equip-ment tires. Recommended types and sizes areshown in ‘‘Wheels & tires’’ in the ‘‘Technicalinformation’’ section.

IDI004

DO-IT-YOURSELF

7-33

Z 96.12.20/ X

WARNING

O The use of tires other than thoserecommended or the mixed use oftires of different brands, con-struction (bias, bias-belted or ra-dial), or tread patterns can ad-versely affect the ride, braking,handling, ground clearance,body-to-tire clearance, snowchain clearance, speedometercalibration, headlight aim andbumper height. Some of theseeffects may lead to accidents andcould result in serious personalinjury.

O If the wheels are changed for anyreason, always replace withwheels which have the same off-set dimension. Wheels of a dif-

ferent offset could cause earlytire wear, possibly degraded ve-hicle handling characteristicsand/or interference with the brakediscs/drums. Such interferencecan lead to decreased brakingefficiency and/or early brakepad/shoe wear. Refer to ‘‘Wheelsand tires’’ in the ‘‘Technical andconsumer information’’ sectionfor wheel’s offset dimensions.

O Do not install a deformed wheelor tire even if it has been re-paired. Such wheels or tirescould have structural damage andcould fail without warning.

Wheel balance

Unbalanced wheels may affect vehicle han-dling and tire life. Even with regular use,

wheels can get out of balance. Therefore, theyshould be balanced as required.

Wheel balance service should be per-formed with the wheels off the vehicle.Spin balancing the driving wheels onthe vehicle could lead to transmissiondamage.

Care of wheels

O Wash the wheels when washing the vehicleto maintain their appearance.

O Clean the inner side of the wheels whenthe wheel is changed or the underside ofthe vehicle is washed.

O Do not use abrasive cleaners when wash-ing the wheels.

O Inspect wheel rims regularly for dents orcorrosion. Such damage may cause loss ofpressure or poor seal at the tire bead.

O INFINITI recommends that the road wheelsbe waxed to protect against road salt inareas where it is used during winter.

DO-IT-YOURSELF

7-34

Z 96.12.20/ X

Spare tire (T-type spare tire)

Observe the following precautions if theT-type spare tire must be used, otherwise yourvehicle could be damaged or involved in anaccident.

CAUTION

● The T-type spare tire should beused only for emergency. Itshould be replaced by the stan-dard tire at the first opportunity.

● Drive carefully while the T-typespare tire is installed. Avoidsharp turns and abrupt brakingwhile driving.

● Periodically check tire inflationpressure, and always keep it at60 psi (420 kPa, 4.2 bar).

● Do not drive your vehicle atspeeds faster than 50 MPH (80km/h).

● Do not use tire chains on a T-typespare tire. Tire chains will not fitproperly on the T-type spare tireand may cause damage to thevehicle.

● When driving on roads coveredwith snow or ice, the T-type sparetire should be used on the frontand original tire used on the rearwheels (drive wheels). Use tirechains only on the rear two origi-nal tires.

● Tire tread of the T-type spare tirewill wear at a faster rate than theoriginal tire. Replace the T-typespare tire as soon as the treadwear indicators appear.

● Because the T-type spare tire issmaller than the original tire,ground clearance is reduced. Toavoid damage to the vehicle donot drive over obstacles. Also donot drive the vehicle through anautomatic car wash since it mayget caught.

● Do not use the T-type spare tireon other vehicles.

● Do not use more than one T-typespare tire at the same time.

● Do not tow a trailer while theT-type spare tire is installed.

DO-IT-YOURSELF

7-35

Z 96.12.20/ X

Z 96.12.20/ X

8 MAINTENANCE

General maintenance .................................. 8-2Periodic maintenance ................................. 8-5

Z 96.12.20/ X

Your new INFINITI has been designed to haveminimum maintenance requirements withlonger service intervals to save you both timeand money. However, some day-to-day andregular maintenance is essential to maintainyour INFINITI’s good mechanical condition, aswell as its emission and engine performance.

It is the owner’s responsibility to make surethat the specified maintenance, as well asgeneral maintenance, is performed.

As the vehicle owner, you are the only onewho can ensure that your vehicle receives theproper maintenance care. You are a vital linkin the maintenance chain.

General maintenance

General maintenance includes those itemswhich should be checked during normal day-to-day operation of the vehicle. They areessential if your vehicle is to continue tooperate properly. It is your responsibility to

perform these procedures regularly asprescribed.

These checks or inspections can be done byyourself, a qualified technician or, if youprefer, your INFINITI dealer.

Periodic maintenance

The maintenance items listed in this part arerequired to be serviced at regular intervals.

However, under severe driving conditions,additional or more frequent maintenance willbe required.

Where to go for service

If maintenance service is required or yourvehicle appears to malfunction, have thesystems checked and serviced by an autho-rized INFINITI dealer.

INFINITI technicians are well-trained special-ists and are kept up to date with the latestservice information through technical bulle-tins, service tips, and in-dealership informa-

tion systems. They are completely qualified towork on INFINITI vehicles before work be-gins.

You can be confident that your INFINITIdealer’s service department performs the bestjob to meet the maintenance requirements onyour vehicle — in a reliable and economicway.

GENERAL MAINTENANCEDuring the normal day-to-day operation of thevehicle, general maintenance should be per-formed regularly as prescribed in this section.If you detect any unusual sounds, vibrationsor smell, be sure to check for the cause orhave your INFINITI dealer do it promptly. Inaddition, you should notify your INFINITIdealer if you think that repairs are required.

When performing any checks or maintenancework, closely observe the precautions in the‘‘Do-it-yourself’’ section.

MAINTENANCE

8-2

Z 96.12.20/ X

Additional information on the followingitems with ‘‘*’’ is found in the ‘‘Do-it-yourself’’ section.

OUTSIDE THE VEHICLE

The maintenance items listed here should beperformed from time to time, unless otherwisespecified.

Tires* Check the pressure with a gaugeperiodically when at a service station, includ-ing the spare, and adjust to the specifiedpressure if necessary. Check carefully fordamage, cuts or excessive wear.

Wheel nuts* When checking the tires, makesure no nuts are missing, and check for anyloose nuts. Tighten if necessary.

Tire rotation* Tires should be rotated every7,500 miles (12,000 km).

Wheel alignment and balance If thevehicle pulls to either side while driving on astraight and level road, or if you detect uneven

or abnormal tire wear, there may be a need forwheel alignment.

If the steering wheel or seat vibrates at normalhighway speeds, wheel balancing may beneeded.

Windshield wiper blades* Check forcracks or wear if they do not wipe properly.

Doors and engine hood Check that alldoors and the engine hood, operate properly.Also ensure that all latches lock securely.Lubricate hinges and latches if necessary.Make sure that the secondary latch keeps thehood from opening when the primary latch isreleased.

When driving in areas using road salt or othercorrosive materials, check lubrication fre-quently.

INSIDE THE VEHICLE

The maintenance items listed here should bechecked on a regular basis, such as when

performing periodic maintenance, cleaning thevehicle, etc.

Lights* Make sure that the headlights, stoplights, tail lights, turn signal lights, and otherlights are all operating properly and installedsecurely. Also check headlight aim.

Warning lights and buzzers/chimesMake sure that all warning lights andbuzzers/chimes are operating properly.

Windshield wiper and washer* Checkthat the wipers and washer operate properlyand that the wipers do not streak.

Windshield defroster Check that the aircomes out of the defroster outlets properlyand in sufficient quantity when operating theheater or air conditioner.

Steering wheel Check for changes in thesteering conditions, such as excessive freeplay, hard steering or strange noises.

Seats Check seat position controls such as

MAINTENANCE

8-3

Z 96.12.20/ X

seat adjusters, seatback recliner, etc. to en-sure they operate smoothly and that all latcheslock securely in every position. Check that thehead restraints move up and down smoothlyand that the locks (if so equipped) holdsecurely in all latched positions.

Seat belts Check that all parts of the seatbelt system (e.g. buckles, anchors, adjustersand retractors) operate properly and smoothly,and are installed securely. Check the beltwebbing for cuts, fraying, wear or damage.

Accelerator pedal Check the pedal forsmooth operation and make sure the pedaldoes not catch or require uneven effort. Keepthe floor mats away from the pedal.

Brakes Check that the brakes do not pull thevehicle to one side when applied.

Brake pedal* Check the pedal for smoothoperation and make sure it has the properdistance under it when depressed fully. Checkthe brake booster function. Be sure to keep the

floor mats away from the pedal.

Parking brake* Check that the lever has theproper travel and confirm that your vehicle isheld securely on a fairly steep hill with onlythe parking brake applied.

Automatic transmission ‘‘Park’’ mecha-nism On a fairly steep hill check that yourvehicle is held securely with the selector leverin the ‘‘P’’ position without applying anybrakes.

UNDER THE HOOD AND VE-HICLE

The maintenance items listed here should bechecked periodically e.g. each time you checkthe engine oil or refuel.

Windshield washer fluid* Check thatthere is adequate fluid in the tank.

Engine coolant level* Check the coolantlevel when the engine is cold.

Radiator and hoses Check the front of the

radiator and clean off any dirt, insects, leaves,etc., that may have accumulated. Make surethe hoses have no cracks, deformation, dete-rioration or loose connections.

Brake fluid level* Make sure that the brakefluid level is between the ‘‘MAX’’ and ‘‘MIN’’lines on the reservoir.

Battery* Check the fluid level in each cell.It should be between the ‘‘MAX’’ and ‘‘MIN’’lines.

Engine drive belts* Make sure that no beltis frayed, worn, cracked or oily.

Engine oil level* Check the level afterparking the vehicle on a level spot and turningoff the engine. (Be sure to wait a few minutesto allow the oil to drain back into the sump.)

Power steering fluid level* and linesCheck the level when the fluid is cold and theengine is turned off. Check the lines for properattachment, leaks, cracks, etc.

MAINTENANCE

8-4

Z 96.12.20/ X

Automatic transmission fluid level*Check the level after putting the selector leverin ‘‘P’’ with the engine idling.

Exhaust system Make sure there are noloose supports, cracks or holes. If the soundof the exhaust seems unusual or there is asmell of exhaust fumes, immediately locatethe trouble and correct it. (See the carbonmonoxide warning in the ‘‘Starting anddriving’’ section.)

Underbody The underbody is frequently ex-posed to corrosive substances such as thoseused on icy roads or to control dust. It is veryimportant to remove these substances, other-wise rust will form on the floor pan, frame,fuel lines and around the exhaust system. Atthe end of winter, the underbody should bethoroughly flushed with plain water, beingcareful to clean those areas where mud anddirt may accumulate. See the ‘‘Appearance andcare’’ section for additional information.

Fluid leaks Check under the vehicle for fuel,oil, water or other fluid leaks after the vehiclehas been parked for a while. Water drippingfrom the air conditioner after use is normal. Ifyou should notice any leaks or if gasolinefumes are evident, check for the cause andhave it corrected immediately.

PERIODIC MAINTENANCETo ensure smooth, trouble-free, safe andeconomical driving, INFINITI provides twodifferent maintenance schedules that may beused, depending upon the conditions in whichyou usually drive. These schedules containboth distance and time intervals, up to 60,000miles (96,000 km)/48 months. For mostpeople, the odometer reading will indicatewhen service is needed. However, if you drivevery little, your vehicle should be serviced atthe regular time intervals shown in the sched-ule. After 60,000 miles (96,000 km) or48 months, continue periodic mainte-

nance at the same mileage/time inter-vals.

Schedule 1

Follow Periodic Maintenance Schedule 1 ifyour driving habits frequently include one ormore of the following driving conditions:

O Repeated short trips of less than 5miles (8 km).

O Repeated short trips of less than 10miles (16 km) with outside tempera-tures remaining below freezing.

O Operating in hot weather in stop-and-go ‘‘rush hour’’ traffic.

O Extensive idling and/or low speeddriving for long distances, such aspolice, taxi or door-to-door deliveryuse.

O Driving in dusty conditions.

MAINTENANCE

8-5

Z 96.12.20/ X

O Driving on rough, muddy, or saltspread roads.

O Towing a trailer, using a camper ora car-top carrier.

Schedule 2

Follow Periodic Maintenance Schedule 2 ifnone of the driving conditions shown inSchedule 1 apply to your driving habits.

MAINTENANCE

8-6

Z 96.12.20/ X

SCHEDULE 1Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: Perform service at the mileage intervals only

MAINTENANCE OPERATION MAINTENANCE INTERVAL

Perform at number of miles, kilometers ormonths, whichever comes first.

Miles x 1,000 3.75 7.5 11.25 15 18.75 22.5 26.25 30 33.75 37.5 41.25 45 48.75 52.5 56.25 60(km x 1,000) (6) (12) (18) (24) (30) (36) (42) (48) (54) (60) (66) (72) (78) (84) (90) (96)Months 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48

EMISSION CONTROL SYSTEM MAINTENANCEService ‘‘A’’

Engine oil R R R R R R R R R R R R R R R REngine oil filter (Use Part No. 15208-31U00 or equivalent) R R R R R R R R R R R R R R R R

Service ‘‘E’’Air cleaner filter See NOTE (1) [R] [R]

Service ‘‘F’’Vapor lines I* I*Fuel lines I* I*

Service ‘‘G’’Drive belts See NOTE (2) I*

Service ‘‘J’’Engine coolant See NOTE (3) R*

Service ‘‘H’’Spark plugs (PLATINUM-TIPPED type) [R]

Service ‘‘L’’Fuel filter See NOTE (4)*

NOTE: (1) If operating mainly in dusty conditions, more frequent maintenance may be required.(2) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months.(3) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months.(4) If vehicle is operated under extremely adverse weather conditions or in areas where ambient temperatures are either extremely low or extremely high, the filters

might become clogged. In such an event, replace them immediately.* Maintenance items and intervals with ‘‘*’’ are recommended by INFINITI for reliable vehicle operation. The owner need not perform such maintenance in order

to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required.

MAINTENANCE

8-7

Z 96.12.20/ X



Perform at number of miles, kilometers ormonths, whichever comes first.

Miles x 1,000 3.75 7.5 11.25 15 18.75 22.5 26.25 30 33.75 37.5 41.25 45 48.75 52.5 56.25 60

(km x 1,000) (6) (12) (18) (24) (30) (36) (42) (48) (54) (60) (66) (72) (78) (84) (90) (96)

Months 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48

CHASSIS AND BODY MAINTENANCE

Service ‘‘B’’

Brake pads & discs I I I I I I I I

Steering gear & linkage, axle & suspension parts I I I I I I I I

Steering linkage ball joints & front suspension ball joints I I I I I I I I

Exhaust system I I I I I I I I

Ventilation air filter R R R R R R R R

Service ‘‘D’’

Brake lines & cables I I I I

Automatic transmission fluid & differentialgear oil See NOTE (1) I I I I

Service ‘‘K’’

Supplemental air bag, and (If soequipped) supplemental side air bag sys-tems

See NOTE (2)

NOTE: (1) If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) oil at every 30,000miles (48,000 km) or 24 months.

(2) Inspect the supplemental air bag and supplemental side air bag systems 10 years after the date of manufacture noted on the F.M.V.S.S.certification label.

MAINTENANCE

8-8

Z 96.12.20/ X



Perform at number of miles, kilometers or months,whichever comes first.

Miles x 1,000 7.5 15 22.5 30 37.5 45 52.5 60(km x 1,000) (12) (24) (36) (48) (60) (72) (84) (96)Months 6 12 18 24 30 36 42 48

EMISSION CONTROL SYSTEM MAINTENANCEService ‘‘B’’

Engine oil R R R R R R R REngine oil filter (Use Part No. 15208-31U00 or equivalent) R R R R R R R R

Service ‘‘E’’Air cleaner filter [R] [R]

Service ‘‘F’’Vapor lines I* I*Fuel lines I* I*

Service ‘‘G’’Drive belts See NOTE (1) I*

Service ‘‘J’’Engine coolant See NOTE (2) R*

Service ‘‘H’’Spark plugs (PLATINUM-TIPPED Type) [R]

Service ‘‘L’’Fuel filter See NOTE (3)*

NOTE: (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months.(2) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months.(3) If vehicle is operated under extremely adverse weather conditions or in areas where ambient temperatures are either extremely low or extremely high, the filters

might become clogged. In such an event, replace them immediately.* Maintenance items and intervals with ‘‘*’’ are recommended by INFINITI for reliable vehicle operation. The owner need not perform such maintenance in order

to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required.

MAINTENANCE

8-9

Z 96.12.20/ X



Perform at number of miles, kilometers or months,whichever comes first.

Miles x 1,000 7.5 15 22.5 30 37.5 45 52.5 60

(km x 1,000) (12) (24) (36) (48) (60) (72) (84) (96)

Months 6 12 18 24 30 36 42 48

CHASSIS AND BODY MAINTENANCE

Service ‘‘D’’

Brake lines & cables I I I I

Brake pads & discs I I I I

Automatic transmission fluid & differential gear oil I I I I

Ventilation air filter R R R R

Service ‘‘F’’

Steering gear linkage axle & suspension parts I I

Exhaust system I I

Service ‘‘K’’

Supplemental air bag, and (If so equipped) supple-mental side air bag systems

See NOTE (1)

NOTE: (1) Inspect the supplemental air bag and supplemental side air bag systems 10 years after the date of manufacture noted on the F.M.V.S.S.certification label.

MAINTENANCE

8-10

Z 96.12.20/ X

EXPLANATION OF MAINTE-NANCE ITEMS

Additional information on the followingitems with ‘‘*’’ is found in the ‘‘Do-it-yourself’’ section.

Emission control system mainte-nance

Drive belts* Check drive belts for wear,fraying or cracking and also for proper ten-sion. Replace the drive belts if found dam-aged.

Air cleaner filter Under normal drivingconditions, the air cleaner filter should bereplaced in accordance with the maintenanceschedule. However, driving the vehicle industy areas may cause more rapid clogging ofthe element. Consequently, the element mayhave to be replaced more frequently.

Vapor lines Check vapor lines and connec-tions for failure or looseness. If leaks arefound, replace them.

Fuel lines Check the fuel hoses, piping andconnections for leaks, looseness or deteriora-tion. Replace any parts if they are damaged.

Fuel filter If the vehicle is operated underextremely adverse weather conditions or inareas where ambient temperatures are eitherextremely low or extremely high, the filtermight become clogged. In such an event,replace the filter immediately.

Engine coolant* Drain and flush the coolingsystem.

Engine oil & oil filter* Under normaldriving conditions, the engine oil and oil filtershould be replaced in accordance with themaintenance schedule. However, under severedriving conditions, they may have to bereplaced more frequently.

Spark plugs* Replace with new plugs hav-ing the correct heat range.

Chassis and body maintenance

Brake lines & cables Check the brake linesand hoses (including brake booster vacuumhoses, connections & check valve) and park-ing brake cables for proper attachment, leaks,cracks, chafing, abrasion, deterioration, etc.

Brake pads & discs Check these and theother neighboring brake components for wear,deterioration and leaks. Under severe drivingconditions, they may have to be inspectedmore frequently.

Automatic transmission fluid & differ-ential gear oil* Visually inspect for signs ofleakage. Under severe driving conditions, thefluid or oil should be replaced at the specifiedinterval.

Steering gear & linkage, axle & suspen-sion parts Check for damage, looseness andleakage of oil or grease. Under severe drivingconditions, more frequent inspection shouldbe performed.

MAINTENANCE

8-11

Z 96.12.20/ X

Steering linkage ball joints & frontsuspension ball joints Check the balljoints for damage, looseness and greaseleakage.

Exhaust system Visually check the exhaustpipes, muffler, and hangers for proper attach-ment, leaks, cracks, chafing, abrasion, dete-rioration, etc. Under severe driving conditions,inspection should be performed more fre-quently.

Ventilation air filter Under normal condi-tions, the ventilation air filter should bereplaced in accordance with the maintenanceschedule. However, in some situations, the airfilter may clog more rapidly (depending on theair conditioner’s working environment). If thishappens, the air flow may decrease, or thewindows may fog up easily when the airconditioner is in use, the air filter should bereplaced immediately at your INFINITI dealer.

Supplemental air bag, and (If so

equipped) supplemental side air bagsystems Check the supplemental air bag andsupplemental side air bag components forproper attachment, damage, deformities,cracks, rust, etc. Work around and on thesupplemental air bags or supplemental sideair bags should be done by an authorizedINFINITI dealer.

MAINTENANCE

8-12

Z 96.12.20/ X

9 TECHNICAL AND CONSUMER INFORMATION

Major systems and how they work ............ 9-2Engine and drive train ................................ 9-2Brake systems ........................................... 9-10For your driving comfort - automatic airconditioning .............................................. 9-11Hard clear coat ......................................... 9-12Supplemental restraint system ................. 9-12Capacities and recommendedfuel/lubricants ........................................... 9-16Recommended SAE viscosity number ..... 9-21Engine ....................................................... 9-23Wheels and tires ...................................... 9-24

Dimensions and weights .......................... 9-25When traveling or registering your vehiclein another country .................................... 9-25Vehicle identification ................................ 9-26Vehicle loading information ..................... 9-30Trailer towing ........................................... 9-32Uniform tire quality grading ..................... 9-36Emission control system warranty ........... 9-37Reporting safety defects (For U.S.A.) ...... 9-37Readiness for Inspection/Maintenance(I/M) test (For U.S.A.) ............................... 9-38

Z 96.12.20/ X

MAJOR SYSTEMS ANDHOW THEY WORKThe common theme that applies to almost allof the automotive systems described in thissection is electronic controls. Because of theirspeed, precision and reliability, electroniccomponents are used wherever possible toincrease the efficiency and driveability of yourINFINITI.

The typical control system employs ‘‘sensors’’,which collect information about operatingconditions and driver demand and send it,usually in the form of an electrical voltagesignal, to an ‘‘engine control module’’, whichis a small, on board computer. The enginecontrol module monitors the information pro-vided by the sensors, calculates the optimumor best control, and makes it happen throughsignals to electrical ‘‘actuators’’ in the engineor transmission or brake system—whereverthe control must take place. The results canseem miraculous.

ENGINE AND DRIVE TRAIN

INFINITI VH41DE Engine withElectronic Concentrated EngineControl System (ECCS)

SUMMARY—ECCS ENGINE

The magic of the ECCS system is that itcoordinates the functions and control of air-fuel mixture, ignition timing, exhaust gasrecirculation, and idle speed by the operationof a high-speed computer. The preciselycoordinated control of all of these functionsallows the engine to operate more efficientlyand emission free than would have beenpossible under earlier technologies.

TECHNICAL AND CONSUMER INFORMATION

9-2

Z 96.12.20/ X

SIT0036


9-3

Z 96.12.20/ X

To get the most from an engine—in the wayof performance, smooth driveability, economyand control of harmful emissions—a numberof decisive factors must be controlled asprecisely as possible under all driving condi-tions. These ‘‘factors’’ include the following:

O The timing and overlap of the intake andexhaust valves in relation to the position ofthe pistons in the engine.

O The mixture of air and fuel that enters theengine cylinders during each intake strokeof the pistons.

O The timing of the spark that ignites thepressurized charge of air and fuel near theend of the compression stroke of thepistons.

O The temperature of the combustion thatoccurs in the cylinders, especially underload.

O Engine idle speed under all conditions.

The engine in your INFINITI has degrees ofprecision in the automatic control of thesefactors that, only a few years ago, were notthought possible by any known technology.Such a high performance engine must operatesmoothly and efficiently at all speeds. And itmust do so with a minimum of fuel consump-tion and a minimum of emissions into theenvironment.

MIXTURE CONTROL

A gasoline engine requires a relatively ‘‘rich’’mixture of fuel to air during idle, a ‘‘lean’’mixture for mid-range and ‘‘cruise’’ condi-tions, and a ‘‘richer’’ mixture for high load,high RPM operation. The changes in amountof fuel delivered to the engine must occursmoothly, sometimes in response to suddenchanges in demand from the driver. TheINFINITI ECCS can give the engine preciselythe amount of fuel required for each condition,according to a precise measurement of theamount of air that is allowed into the engine

either through automatic devices provided foridle control or in response to your footpressure on the vehicle throttle.

All of the atmospheric air that is drawn intothe engine is measured by a mass air flowsensor.

This type of mass air flow sensor can respondvery quickly to changes in intake air quantityand density, which means as you step on thethrottle of your INFINITI to move into freewaytraffic, a voltage signal is sent to the ECM(engine control module) instantly, and theECM responds just as quickly to provide morefuel by allowing the port fuel injectors to stayopen precise milliseconds longer. The resultis smooth acceleration, without ‘‘stumble’’ or‘‘hesitation’’.


9-4

Z 96.12.20/ X

SEQUENTIAL MULTIPORTFUEL INJECTION SYSTEM

Your INFINITI engine uses a separate fuelinjector for each cylinder. These are placedinto the intake ports, so that they can sprayatomized fuel under pressure into the intakeair stream. These injectors are controlled‘‘sequentially’’, which means that they operatein each cylinder according to the firing order.Each injector opens to spray its carefullymetered amount of fuel just before the intakevalve of the cylinder opens.

Constant Pressure

Fuel injector operation depends upon a supplyof fuel that is always maintained at a constantpressure in relation to the pressure in theengine intake manifold. Under pressure, thefuel travels through the line, through a largeand efficient fuel filter mounted under thehood, and into a ‘‘fuel rail’’ which feeds theinjectors. Fuel flows into the bases of the

injectors, where it is available to flow out ofthe injector nozzles and into the intake portswhen the injectors are opened electrically bysignals from the ECM.

By allowing more or less fuel to return to thetank, the fuel pressure regulator maintains thepressure at the injectors at the specified valueabove manifold pressure.

That allows the ECM to adjust the flow of fuelinto the engine simply by controlling theamount of time the injectors stay open. Thelonger the injectors are held open, in milli-seconds, the more fuel flow.

IGNITION TIMING CONTROL

For best efficiency, ignition timing must bedynamic, that is it must change dependingupon the engine operating conditions. It mustrespond to engine load, RPM changes, enginetemperature changes, altitude, and so on. Forprecisely correct, automatic, adjustments inignition timing to take place, the ECM must

have sensors that tell about such conditions.The most important of these is the camshaftposition sensor. The camshaft position sensortells the ECM the engine speed and thepositions of the pistons under all conditions.

CONTROL OF COMBUSTIONTEMPERATURE

Oxides of nitrogen, in a number of chemicalvariations, are among the major componentsof photochemical air pollution. These nitrogenoxide compounds are formed in the enginewhen the combustion temperatures are higherthan about 2,000°F (1,093°C). One way todecrease nitrogen oxide formation in theengine, then, is to cool the temperature ofcombustion slightly. This is done by allowinga small amount of burned, and therefore inert,exhaust gases to recirculate back into theengine intake manifold where they can bedrawn into the cylinders.


9-5

Z 96.12.20/ X

IDLE AIR CONTROL SYSTEM

The idle speed of an engine may be affectedby a number of conditions. For example, acold engine is inclined to run sluggishly atidle as well as under load. Such accessoriesas air conditioning and power steering mayload the engine during idle and bring the idlespeed down. Accessories that draw a largeamount of current from the alternator, such asheadlamps, window defoggers, cooling fans,etc., increase the load on the engine. So, toprovide smooth idle under all conditions, andto provide the best overall fuel economy, theECCS system gives computer controlled, au-tomatic idle speed control. Using the infor-mation provided by the sensors, the ECMcalculates the best idle speed and brings itabout through the IACV-AAC valve, whichallows more, or less, air into the intakemanifold. Because the air is measured by themass air flow sensor, the injectors alwaysfollow along with the correct pulse duration,

so the mixture is always correct.

ON BOARD DIAGNOSTIC SYS-TEM

The ECM (engine control module) has an onboard diagnostic system function, whichmonitors the engine and automatic transmis-sion related circuits/components for prob-lems. If the ECM senses a problem, it storesthe information for retrieval by an experiencedINFINITI technician at your dealership. Sodiagnosis and repair, even of this sophisti-cated system, may be made easier and moreaccurate.


9-6

Z 96.12.20/ X

INFINITI electronically controlled 4-speed automatic transmission

SIT0037


9-7

Z 96.12.20/ X

The function of an automotive transmission, isto provide a means of matching engine speedand vehicle speed in such a way that theengine is kept in the most efficient RPM rangeat all times.

Automatic Transmission ControlFunctions

Using the information provided by the sen-sors, the control unit calculates the bestpossible operation of the transmission for anycondition by controlling the following func-tions:

1. Shift timing.

2. Lock-up timing.

3. Engine brake operation timing.

Self Diagnosis

Any electrical malfunction in the system willbe sensed by the automatic transmissioncontrol unit, which stores the information inmemory.


9-8

Z 96.12.20/ X

INFINITI ANTI-LOCK BRAKE/TRACTION CONTROL SYSTEM (ABS & TCS)

SIT0038


9-9

Z 96.12.20/ X

BRAKE SYSTEMS

INFINITI ANTI-LOCK BRAKESYSTEM (ABS)

In sudden braking and on wet surfaces, thewheels are more easily locked. If the frontwheels lock, steering control may be difficult.

If the rear wheels lock, swerving or spinningof the vehicle may result. To reduce thispossibility, short and quick pumping of thebrakes is needed, but this technique can bedifficult for some drivers, especially in anemergency. The Anti-Lock brake system (ABS)can perform this pumping action quickly andis automatic when the driver depresses thebrake pedal firmly. Since the braking force iscontrolled delicately by electronic control,wheel lock-up is minimized, and steeringoperation remains normal.

Brake pedal kickback remains minimal, andsmooth pedal feel is ensured even when theABS is operating.

System malfunction

If the ABS/TCS control unit detects a malfunc-tion in any of the ABS system electricalcircuits, it will de-activate the anti-lock func-tion by cutting electrical power to the ABSactuator. The braking system will then work asusual, without the anti-lock function.

If the control unit stops the ABS systemoperation, the ABS warning lamp will glow.This will aid your INFINITI dealership techni-cian in diagnosis of the problem.

TRACTION CONTROLSYSTEM

The ABS/TCS control unit detects conditionsof driving wheel slippage by using the wheelspeed signals sent from the 4 wheels. Whenslipping is excessive, the traction controlsystem cuts fuel to the engine to reduceslipping and it also controls automatic trans-mission shifting if necessary. The systemcontrols throttle openings so that optimum

engine torque can be obtained in accordancewith the driver’s acceleration requirements.This system helps to make the vehicle easierto drive by reducing the driver’s mentalburden of accelerating delicately when startingor accelerating in slippery conditions, forexample snow-covered surfaces.

System malfunction

If the ABS/TCS control unit detects a malfunc-tion in any of the TCS system electricalcircuits, it will de-activate the TCS function bycutting electrical power to the throttle actuatorcontrol module. The system will then work asusual, without the TCS function.

If the control unit stops the TCS systemoperation, the TCS OFF indicator and SLIPindicator will glow. This will aid your INFINITIdealership technician in diagnosis of theproblem.


9-10

Z 97.3.12/ X

FOR YOUR DRIVINGCOMFORT - AUTOMATICAIR CONDITIONINGFor precision control over the interior climateof your INFINITI, there is a fully automatic airconditioning system. The system uses sen-sors, a control unit or ‘‘auto amplifier’’, andactuators to provide the most comfortabletemperature, humidity and air flow inside thevehicle. The auto amplifier also has a selfdiagnosis feature to recognize any systemcircuit malfunction and aid your INFINITIdealership technician in a quick, accuraterepair if it becomes necessary.

The auto amplifier receives information fromthe control panel, by which you may requestthe interior ‘‘weather’’ you wish, and fromsensors placed in strategic locations in thevehicle. Once you have signaled a targettemperature at the control panel, the autoamplifier uses information from the sensors tocalculate what must be done. ITI040M


9-11

Z 96.12.20/ X

HARD CLEAR COAT(New cross linking clear coat )

Your INFINITI paint coating has been appliedwith the finest appearance and best durabilityin mind:● To ensure enhanced appearance, (i.e.,

solid, pearl and metallic paint clearness),the hard clear coat (2-coat/1-bake, or3-coat/2-bake type) is used instead of theconventional clear coat (acrylic resin).

● Improved scratch resistance—The hard clear coat has higher resistanceagainst scratches which may be caused bycar wash equipment than the conventionalcoats.

● Refinishing the clear coat should only bedone using hard clear type materials, toensure compatibility in the rate of refin-isher gloss retention.

SUPPLEMENTAL RE-STRAINT SYSTEM

SUPPLEMENTAL AIR BAG,AND (If so equipped) SUPPLE-MENTAL SIDE AIR BAG SYS-TEMS

Supplemental air bags are designed to inflatein certain types of frontal collisions, andsupplemental side air bags are designed toinflate in certain types of side collisions.

Supplemental air bags help cushion the im-pact force to the front occupants’ face andchest in certain types of frontal collisions inconjunction with the seat belts.

Supplemental side air bags help cushion theimpact force to the front occupants’ chest incertain types of side collisions in conjunctionwith the seat belts.

When supplemental air bags receive a signalfrom the diagnosis sensor unit for certain

ITI047-A


9-12

Z 97.1.7/ X

types of frontal collisions, the supplementalair bags inside the supplemental air bagmodules fill with gas, inflating instantly.

When supplemental side air bags receivesignals from the satellite sensor in the lowercenter pillar and the diagnosis sensor unit forcertain types of side collisions, the supple-mental side air bag inside the supplementalside air bag module fills with gas, inflatinginstantly.

The collision mode under which inflationoccurs is different for the supplemental air bagand the supplemental side air bag. For ex-ample, even if the supplemental air bagactivates, the supplemental side air bag mightnot activate.

In addition, in left side collisions, only the leftsupplemental side air bag is designed toinflate and in right side collisions, only theright supplemental side air bag is designed toinflate.

Pre-tensioner seat belt systemThe front seat belt pre-tensioner, working withthe retractor, helps tighten the seat belt whenthe vehicle is involved in certain types ofcollisions, thus helping to restrain the occu-pants on the front seats. This, in conjunctionwith the supplemental air bag systems, re-duces impact forces to the occupants in acollision.When the pre-tensioner receives a signal atthe time of a collision, gas inside the pre-tensioner expands, thereby rotating the rotatorto operate the retractor. The pre-tensionerswill not usually operate when the vehicle isinvolved in side or rear-end collisions or theseat belts are not fastened.


9-13

Z 96.12.20/ X

SIT0053A


9-14

Z 96.12.20/ X

SIT0056


9-15

Z 96.12.20/ X

CAPACITIES AND RECOMMENDED FUEL/LUBRICANTSThe following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow theprocedure instructed in the ‘‘Do-it-yourself’’ section to determine the proper refill capacity.

Capacity (Approximate)Recommended specifications

US measure Imp measure Liter

Fuel 21-1/8 gal 17-5/8 gal 80 Unleaded premium gasoline with an octane rating of at least 91 AKI (RON 96)*1

Engine oil (Refill)O API SG or SH and Energy Conserving II*2, *3O API Certification Mark*2, *3With oil filter 5-5/8 qt 4-5/8 qt 5.3

Without oil filter 5-1/4 qt 4-3/8 qt 5.0

Cooling system

With reservoir 12-3/8 qt 10-1/4 qt 11.7Anti-freeze coolant (Ethylene glycol base)

Reservoir 3/4 qt 5/8 qt 0.7

Differential gear oil — — — API GL-5*3

Automatic transmissionfluid

Refill to the proper oil level according to the instructions in the‘‘Do-it-yourself’’ section

Nissan Matic ‘‘D’’ (Continental U.S. and Alaska) or Genuine Nissan AutomaticTransmission Fluid (Canada).*5

Power steering fluid Type DEXRONTMIIE, DEXRONTMIII or equivalent

Brake fluid Genuine Brake Fluid*4 or equivalent DOT 3 (US FMVSS No. 116)

Multi-purpose grease — — — NLGI No. 2 (Lithium soap base)

Air conditioning systemrefrigerant — — — HFC-134a (R-134a)

Air conditioning systemlubricants

Nissan A/C System OilType S or equivalent

*1: For further details, see ‘‘Fuel requirement’’.*2: For further details, see ‘‘Engine oil and oil filter recommendation’’.*3: For further details, see ‘‘Recommended SAE viscosity number’’.*4: Available in mainland U.S.A. through your INFINITI dealer.*5: DexronTM III/MerconTM or equivalent may also be used. Outside the continental United States and Alaska contact an INFINITI dealer for more information regarding suitable fluids, including

recommended brand(s) of DexronTM III/MerconTM or DexronTM IIE/MerconTM Automatic Transmission Fluid.


9-16

Z 96.12.20/ X

FUEL REQUIREMENT

In order to maintain engine and exhaustsystem durability and performance, UN-LEADED PREMIUM gasoline with an octanerating of at least 91 AKI (Anti-Knock Index)number (Research octane number 96) must beused.

If premium gasoline is not available, UN-LEADED REGULAR gasoline with an octanerating of 87 AKI (Anti-Knock Index) number(Research octane number 91) may be tempo-rarily used, but only under the followingprecautions:

O Have the fuel tank filled only partially withunleaded regular gasoline, and fill up withpremium unleaded gasoline as soon aspossible.

O Avoid full throttle driving and abrupt ac-celeration

Use UNLEADED fuel only. Under nocircumstances should leaded gasoline

be used. It will damage your three-waycatalyst and increase dangerous emis-sions from your vehicle exhaust.

CAUTION

Using a fuel other than that specifiedcould adversely affect the emissioncontrol devices and systems, andcould also affect warranty coverage.

Under no circumstances should aleaded gasoline be used, since thiswill damage the three way catalyst.

Reformulated gasoline

Some fuel suppliers are now producing refor-mulated gasolines. These gasolines are spe-cially designed to reduce vehicle emissions.INFINITI supports efforts towards cleaner airand suggests that you use reformulated gaso-line when available.

Gasoline containing oxygenates

Some fuel suppliers sell gasoline containingoxygenates such as ethanol, MTBE andmethanol with or without advertising theirpresence. INFINITI does not recommend theuse of fuels of which the oxygenate contentand the fuel compatibility for your INFINITIcannot be readily determined. If in doubt, askyour service station manager.

If you use oxygenate-blend gasoline, pleasetake the following precautions as the usage ofsuch fuels may cause vehicle performanceproblems and/or fuel system damage.

O The fuel should be unleaded andhave an octane rating no lower thanthat recommended for unleadedgasoline.

O If an oxygenate-blend, excepting amethanol blend, is used, it shouldcontain no more than 10% oxygen-


9-17

Z 96.12.20/ X

ate. (MTBE may, however, be addedup to 15%.)

O If a methanol blend is used, it shouldcontain no more than 5% methanol(methyl alcohol, wood alcohol). Itshould also contain a suitableamount of appropriate cosolventsand corrosion inhibitors. If not prop-erly formulated with appropriatecosolvents and corrosion inhibitors,such methanol blends may cause fuelsystem damage and/or vehicle per-formance problems. At this time, suf-ficient data is not available to ensurethat all methanol blends are suitablefor use in INFINITI vehicles.

If any undesirable driveability problems suchas engine stalling and hard hot starting areexperienced after using oxygenate-blend fuels,immediately change to a non-oxygenate fuelor a fuel with a low blend of MTBE.

Take care not to spill gasoline duringrefueling. Gasoline containing oxygen-ates can cause paint damage.

Aftermarket fuel additives

INFINITI does not recommend the use of anyfuel additives (i.e. fuel injector cleaner, octanebooster, intake valve deposit removers, etc.)which are sold commercially. Many of theseadditives intended for gum, varnish or depositremoval may contain active solvent or similaringredients that can be harmful to the fuelsystem and engine.

Octane rating tips

In most parts of North America, you shoulduse unleaded gasoline with an octane rating ofat least 87 or 91 AKI (Anti-Knock Index)number. However, you may use unleadedgasoline with an octane rating as low as 85AKI (Anti-Knock Index) number in these highaltitude areas [over 4,000 ft (1,219 m)] suchas: Colorado, Montana, New Mexico, Utah,

Wyoming, northeastern Nevada, southernIdaho, western South Dakota, western Ne-braska, and that part of Texas which is directlysouth of New Mexico.

Using unleaded gasoline with an oc-tane rating lower than stated above cancause persistent, heavy ‘‘spark knock’’.(‘‘Spark knock’’ is a metallic rappingnoise.) If severe, this can lead to en-gine damage. If you detect a persistentheavy spark knock even when usinggasoline of the stated octane rating, orif you hear steady spark knock whileholding a steady speed on level roads,have your dealer correct the condition.Failure to correct the condition is mis-use of the vehicle, for which INFINITI isnot responsible.

Incorrect ignition timing will result in knock-ing, after-run or overheating. This in turn maycause excessive fuel consumption or damageto the engine. If any of the above symptoms


9-18

Z 96.12.20/ X

are encountered, have your vehicle checked atan INFINITI dealer or other competent servicefacility.

However, now and then you may noticelight spark knock for a short time whileaccelerating or driving up hills. This isno cause for concern, because you getthe greatest fuel benefit when there islight spark knock for a short time underheavy engine load.

ENGINE OIL AND OIL FILTERRECOMMENDATION

Selecting the correct oil

It is essential to choose the correct quality,and viscosity oil to ensure satisfactory enginelife and performance. Nissan recommends theuse of a low friction oil (energy conserving

oil) in order to improve fuel economy andconserve energy. Oils which do not have thespecified quality label should not be used asthey could cause engine damage.

Only those engine oils with the AmericanPetroleum Institute (API) CERTIFICATIONMARK on the front of the container should be

SIT0025


9-19

Z 96.12.20/ X

used. This type of oil supersedes the existingAPI SG or SH and Energy Conserving IIcategories.

If you cannot find engine oil with the CERTI-FICATION MARK, an API SG or SH andEnergy Conserving II oil with API ServiceSymbol may be used. An oil with a singledesignation ‘‘SG’’ or ‘‘SH’’, or in combinationwith other categories (for example, ‘‘SG/CC’’or ‘‘SG/CD’’) may also be used if one with theAPI CERTIFICATION MARK cannot be found.

Mineral based or synthetic type oils may beused in your INFINITI vehicle. These oils musthowever, meet the API quality and SAEviscosity ratings specified for your vehicle. Donot mix mineral based and synthetic type oilsin the engine at the same time.

Oil additives

INFINITI does not recommend the use of oiladditives. The use of an oil additive is notnecessary when the proper oil type is used

and maintenance intervals are followed.

Oil which may contain foreign matter or hasbeen previously used should not be used.

Oil viscosity

The engine oil viscosity or thickness changeswith temperature. Because of this, it is impor-tant that the engine oil viscosity be selectedbased on the temperatures at which thevehicle will be operated before the next oilchange. The chart ‘‘Recommended SAE vis-cosity number’’ shows the recommended oilviscosities for the expected ambient tempera-tures. Choosing an oil viscosity other thanthat recommended could cause serious enginedamage.

Selecting the correct oil filter

Your new vehicle is equipped with a high-quality genuine Nissan oil filter. When replac-ing, use the genuine oil filter or its equivalentfor the reason described in ‘‘change intervals’’.

Change intervals

The oil and oil filter change intervals for yourengine are based on the use of the specifiedquality oils and filters. Oil and filter other thanthe specified quality, or oil and filter changeintervals longer than recommended couldreduce engine life. Damage to engines causedby improper maintenance or use of incorrectoil and filter quality and/or viscosity is notcovered by the new INFINITI vehicle warran-ties.

Your engine was filled with a high qualityengine oil when it was built. You do not haveto change the oil before the first recommendedchange interval. Oil and filter change intervalsdepend upon how you use your vehicle.Operation under the following conditions mayrequire more frequent oil and filter changes.


9-20

Z 96.12.20/ X

— repeated short distance driving at coldoutside temperatures,

— driving in dusty conditions,

— extensive idling,

— towing a trailer.

RECOMMENDED SAE VIS-COSITY NUMBER

O SAE 5W-30 viscosity oil is preferredfor all temperatures. SAE 10W-30viscosity oil may be used if theambient temperature is above 0°F(−18°C).

SIT0002A


9-21

Z 96.12.20/ X

O For differential gear oil, 80W-90 ispreferable for ambient temperaturesbelow 104°F (40°C).

AIR CONDITIONING SYSTEMREFRIGERANT AND LUBRI-CANT RECOMMENDATIONS

The air conditioning in your INFINITIvehicle must be charged with the refrig-erant HFC-134a (R-134a) and the lubri-cant, Nissan A/C system oil Type S orthe exact equivalents.

CAUTION

Use of any other refrigerant or lubri-cant will cause severe damage andyou will need to replace yourvehicle’s entire air conditioning sys-tem.

The refrigerant HFC-134a (R-134a) in yourINFINITI vehicle will not harm the earth’sozone layer. Although this refrigerant does notaffect the earth’s atmosphere, certain govern-mental regulations require the recovery and

recycling of any refrigerant during automotiveair conditioning system service. Your INFINITIdealer has the trained technicians and equip-ment needed to recover and recycle your airconditioning system refrigerant.

Contact your INFINITI dealer when servicingyour air conditioning system.

ITI002M


9-22

Z 96.12.20/ X

ENGINEModel VH41DE

Type Gasoline, 4-cycle

Cylinder arrangement 8-cylinder, V-slanted at 90°

Bore × Stroke in (mm) 3.661 × 2.886 (93.0 × 73.3)

Displacement cu in (cm3) 252.01 (4,130)

Firing order* 1-8-7-3-6-5-4-2*

Idle speed rpmSee the ‘‘Emission ControlLabel’’ on the underside ofthe hood.

Ignition timing (BTDC) degree/rpm

CO percentage at idle speed [No air]

Spark plug

Standard PFR5G-11, XFR5A-11

Hot type PFR4G-11, XFR4A-11

Cold type PFR6G-11, XFR6A-11

Camshaft operation Timing chain

Alternator belt size

Width × Length in (mm) 0.839 × 29.53(21.3 × 750)

The spark ignition system of this vehicle meets all require-ments of the Canadian Interference-Causing Equipment Regu-lations.

ITI003M


9-23

Z 96.12.20/ X

WHEELS AND TIRESConventional Spare (T-type)

Road wheel Aluminum 16 x 7JJ —

Steel — 16 x 4T

Offset in (mm) 1.57 (40) 1.18 (30)

Tire size P215/60R16 94V T135/90D16


9-24

Z 96.12.20/ X

DIMENSIONS AND WEIGHTSSedan

Overall length in (mm) 199.2 (5,060)

Overall width in (mm) 71.7 (1,820)

Overall height in (mm) 56.9 (1,445)

Front tread in (mm) 60.6 (1,540)

Rear tread in (mm) 60.6 (1,540)

Wheelbase in (mm) 111.4 (2,830)

Gross vehicle weightrating

lb (kg)

See the ‘‘F.M.V.S.S. certi-fication label’’ on thedriver’s side lock pillar.

Gross axle weight rating

Front lb (kg)

Rear lb (kg)

WHEN TRAVELING ORREGISTERING YOURVEHICLE IN ANOTHERCOUNTRYIf you plan to travel in another country,you should first find out if the fuel available issuitable for your vehicle’s engine.

Using fuel with too low an octane rating maycause engine damage. All gasoline vehiclesmust be operated with unleaded gasoline.Therefore, avoid taking your vehicle to areaswhere appropriate fuel is not available.

When transferring the registration ofyour vehicle to another country, state,province or district, it may be necessary tomodify the vehicle to meet local laws andregulations.

The laws and regulations for motor vehicleemission control and safety standards varyaccording to the country, state, province or


9-25

Z 96.12.20/ X

district; therefore, vehicle specifications maydiffer.

When any vehicle is to be taken intoanother country, state, province or dis-trict and registered, its modifications,transportation, and registration are theresponsibility of the user. INFINITI isnot responsible for any inconveniencethat may result.

VEHICLE IDENTIFICATION

VEHICLE IDENTIFICATIONNUMBER PLATE

The vehicle identification number plate isattached as shown. This number is the iden-tification for your vehicle and is used in thevehicle registration.

VEHICLE IDENTIFICATIONNUMBER (Chassis number)

The number is stamped as shown.ITI014M

SIT0029


9-26

Z 96.12.20/ X

ENGINE SERIAL NUMBER

The number is stamped on the engine asshown.

F.M.V.S.S. CERTIFICATION LA-BEL

The F .M.V.S.S. certification label is affixed asshown.

EMISSION CONTROL INFOR-MATION LABEL

The emission control information label isattached as shown.

SIT0055

SIT0030 SIT0031


9-27

Z 96.12.20/ X

TIRE PLACARD

The cold tire pressure is shown on the tireplacard located on the front face of the rear leftwheel housing inside the vehicle.

AIR CONDITIONER SPECIFI-CATION LABEL

The air conditioner specification label is af-fixed on the strut tower as shown.

SIT0054

SIT0033


9-28

Z 96.12.20/ X

INSTALLING FRONT LICENSEPLATE

Use the following steps to mount the licenseplate:

Before mounting the license plate, confirmthat the following parts are enclosed in thevinyl bag.

O License plate bracket

O J-nut x 2

O Screw x 2

O Screw grommet x 2

1. Temporarily place the license plate bracketwhile aligning part jA of the front bumperwith part jB of the rear surface of thelicense plate bracket.

2. To determine where to drill the hole, markalong both sides of the mounting hole byusing a felt-tip pen.

O Remove the license plate bracket andSIT0034


9-29

Z 96.12.20/ X

connect the arcs to form ovals. Mark thepoint in the center of each oval. These arethe ‘‘pilot’’ drilling locations.

3. Carefully drill two ‘‘pilot’’ holes using a0.39 inch (10 mm) drill bit at the markedlocations. (Be sure that the drill onlygoes through the fascia, or damageto the nut may occur.)

4. Insert grommets into the hole on thefascia.

5. Insert a flat-blade screwdriver into thegrommet hole to add 90° turn onto the partjC .

6. Insert a J-nut into the license plate bracketbefore placing the license plate bracket onthe fascia.

7. Install the license plate bracket withscrews.

8. Install the license plate with bolts that areno longer than 0.55 inch (14 mm).

VEHICLE LOADING INFOR-MATION

WARNING

O It is extremely dangerous to ridein a cargo area inside of a ve-hicle. In a collision, people ridingin these areas are more likely tobe seriously injured or killed.

O Do not allow people to ride in anyarea of your vehicle that is notequipped with seats and seatbelts.

O Be sure everyone in your vehicleis in a seat and using a seat beltproperly.

Terms

It is important to familiarize yourself with thefollowing terms before loading your vehicle:

O Curb Weight (actual weight of your ve-hicle) - vehicle weight including: standardand optional equipment, fluids, emergencytools, and spare tire assembly. This weightdoes not include passengers andcargo.

O GVW (Gross Vehicle Weight) - curb weightplus the combined weight of passengersand cargo.

O GVWR (Gross Vehicle Weight Rating) -maximum total weight (load) limit speci-fied for the vehicle.

O GAWR (Gross Axle Weight Rating) - maxi-mum weight (load) limit specified for thefront or rear axle.


9-30

Z 96.12.20/ X

Determining vehicle load capac-ity

The load capacity of this vehicle is determinedby weight, not by available cargo space. Forexample, a luggage rack, bike carrier, cartopcarrier or similar equipment does not increaseload carrying capacity of your vehicle.

To determine vehicle load capacity:

Vehicle weight can be determined by using acommercial-grade scale, found at places suchas a truck stop, gravel quarry, grain elevator,or a scrap metal recycling facility.

1) Determine the curb weight of your vehicle.

2) Compare the curb weight amount to theGVWR specified for your vehicle to deter-mine how much more weight your vehiclecan carry.

3) After loading (cargo and passengers), re-weigh your vehicle to determine if eitherGVWR or GAWR for your vehicle is ex-

ceeded. If GVWR is exceeded, removecargo as necessary. If either the front orrear GAWR is exceeded, shift the load orremove cargo as necessary.

Loading tips

O The GVW must not exceed GVWR orGAWR as specified on the FMVSS Certi-fication Label.

O Do not load the front and rear axle to theGAWR. Doing so will exceed the GVWR.

WARNING

O Properly secure all cargo to helpprevent it from sliding or shifting.Do not place cargo higher thanthe seatbacks. In a sudden stop orcollision, unsecured cargo couldcause personal injury.

O Do not load your vehicle any-

heavier than the GVWR or themaximum front and rear GAWRs.If you do, parts on your vehiclecan break, or it can change theway your vehicle handles. Thiscould result in loss of control andcause personal injury.

O Overloading can shorten the lifeof your vehicle. Failures causedby overloading are not covered byyour warranty.


9-31

Z 96.12.20/ X

TRAILER TOWING

Your new vehicle was designed to be usedprimarily to carry passengers and cargo.Remember that towing a trailer will placeadditional loads on your vehicle’s engine,drive train, steering, braking and other sys-tems.

Information on trailer towing and the specialequipment required should be obtained from aprofessional trailer dealer/installer.

Maximum load limits

Maximum trailer loads

Never allow the total trailer load to exceed1,000 lb (454 kg). The total trailer load equalstrailer weight plus its cargo weight. Towingloads greater than 1,000 lb (454 kg) or usingimproper towing equipment could adverselyaffect vehicle handling, braking and perfor-mance.

WARNING

Vehicle damage and/or personal in-jury resulting from improper towingprocedures is not covered byINFINITI warranties. Information ontrailer towing and required towingequipment should be obtained fromdealers who specialize in providingtrailers and other towing equipment.

Tongue load

Keep the tongue load between 9 and 11% ofthe total trailer load. If the tongue loadbecomes excessive, rearrange cargo to allowfor proper tongue load.

Maximum gross vehicle weight/maximumgross axle weight

The gross vehicle weight of the towing vehiclemust not exceed the gross vehicle weightrating (GVWR) shown on the F .M.V.S.S.certification label. The gross vehicle weight

SIT0035

ITI002


9-32

Z 96.12.20/ X

equals the combined weight of the unloadedvehicle, passengers, luggage, hitch, trailertongue load and any other optional equip-ment. In addition, front or rear gross axleweight must not exceed the gross axle weightrating (GAWR) shown on the F .M.V.S.S.certification label.

TOWINGLOAD/SPECIFICATION CHART

Unit: lb (kg)

MAXIMUMTOWING LOAD

1,000 (454)

MAXIMUMTONGUE LOAD

110 (49)

Trailer hitch

Choose a proper hitch for your vehicle andtrailer. Make sure the trailer hitch is securelyattached to the vehicle, to help avoid personalinjury or property damage due to sway caused

by crosswinds, rough road surfaces or pass-ing trucks.

CAUTION

O Do not use axle-mounted hitches.

O The hitch should not be attachedto or affect the operation of theimpact-absorbing bumper.

O Do not modify the vehicle exhaustsystem, brake system, etc. whenthe hitch is installed.

O To reduce the possibility of addi-tional damage if your vehicle isstruck from the rear, where prac-tical, remove the hitch when notin use. Remove the receiver whennot in use. After the hitch is re-moved, seal the bolt holes toprevent exhaust fumes, water or

dust from entering the passengercompartment.

O Regularly check that all hitchmounting bolts are securelymounted.

Tire pressures

O When towing a trailer, inflate the vehicletires to the recommended cold tire pres-sure indicated on the tire placard (locatedon the inside of the center console lid).

O Trailer tire condition, size, load rating andproper inflation pressure should be inaccordance with the trailer and tiremanufacturers’ specifications.

Safety chain

Always use a suitable chain between yourvehicle and the trailer. The chain should becrossed and should be attached to the hitch,


9-33

Z 96.12.20/ X

not to the vehicle bumper or axle. Be sure toleave enough slack in the chain to permitturning corners.

Trailer lights

Trailer lights should comply with Federaland/or local regulations. When wiring thevehicle for towing, connect the stop and taillight pickup into the vehicle electrical circuit ata point between the sensor and stop lightswitch or light switch.

Trailer brakes

If your trailer is equipped with a brakingsystem, make sure it conforms to Federaland/or local regulations and that it is properlyinstalled.

WARNING

Never connect a trailer brake systemdirectly to the vehicle brake system.

Pre-towing tips

O Be certain your vehicle maintains a levelposition when a loaded or unloaded traileris hitched. Do not drive the vehicle if it hasan abnormal nose-up or nose-down con-dition; check for improper tongue load,overload, worn suspension or other pos-sible causes of either condition.

O Always secure items in the trailer toprevent load shifts while driving.

O Be certain your rear view mirrors conformto all federal, state or local regulations. Ifnot, install any mirrors required for towingbefore driving the vehicle.

Trailer towing tips

In order to gain skill and an understanding ofthe vehicle’s behavior, you should practiceturning, stopping and backing up in an areawhich is free from traffic. Steering stability,and braking performance will be somewhat

different than under normal driving condi-tions.

O Always secure items in the trailer toprevent load shift while driving.

O Avoid abrupt starts, acceleration or stops.

O Avoid sharp turns or lane changes.

O Always drive your vehicle at a moderatespeed.

O Always block the wheels on both vehicleand trailer when parking. Parking on aslope is not recommended; however, ifyou must do so, and if your vehicle isequipped with automatic transmission,first block the wheels and apply the park-ing brake, and then move the transmissionshift lever into the ‘‘P’’ position. If youmove the shift lever to the ‘‘P’’ positionbefore blocking the wheels and applyingthe parking brake, transmission damagecould occur.


9-34

Z 96.12.20/ X

O When going down a hill, shift into a lowergear and use the engine braking effect.When ascending a long grade, downshiftthe transmission to a lower gear andreduce speed to reduce chances of engineoverloading and/or overheating.

O If the engine coolant rises to an extremelyhigh temperature when the air conditioningsystem is on, turn off the air conditioner.Coolant heat can be additionally vented byopening the windows, switching the fancontrol to high and setting the temperaturecontrol to the ‘‘HOT’’ position.

O Trailer towing requires more fuel thannormal circumstances.

O Avoid towing a trailer for the first 500miles (800 km).

O Have your vehicle serviced more often thanat intervals specified in the recommendedmaintenance schedule.

O When making a turn, your trailer wheels

will be closer to the inside of the turn thanyour vehicle wheels. To compensate forthis, make a larger than normal turningradius during the turn.

O Crosswinds and rough roads will ad-versely affect vehicle/trailer handling, pos-sibly causing vehicle sway. When beingpassed by larger vehicles, be prepared forpossible changes in crosswinds that couldaffect vehicle handling. If swaying doesoccur, firmly grip the steering wheel, steerstraight ahead, and immediately (butgradually) reduce vehicle speed. Thiscombination will help stabilize the vehicle.Never increase speed.

O Be careful when passing other vehicles.Passing while towing a trailer requiresconsiderably more distance than normalpassing. Remember the length of the trailermust also pass the other vehicle beforeyou can safely change lanes.

O To maintain engine braking efficiency andelectrical charging performance, do notuse overdrive (automatic transmission).

O Avoid holding the brake pedal down toolong or too frequently. This could causethe brakes to overheat, resulting in re-duced braking efficiency.

When towing a trailer, change fluid inthe transmission more frequently.

See the ‘‘Maintenance’’ section.


9-35

Z 96.12.20/ X

UNIFORM TIRE QUALITYGRADINGDOT Quality Grades: All passenger car tiresmust conform to Federal Safety Requirementsin addition to these grades.

Treadwear

Treadwear grade is a comparative ratingbased on tire wear rate when tested undercontrolled conditions on specified governmenttest courses. For example, a tire graded 150would wear one and a half (1-1/2) times aswell on the government course as a tiregraded 100. However, relative tire perfor-mance depends on actual driving conditions,and may vary significantly from the norm dueto variations in driving habits, service prac-tices and differences in road characteristicsand climate.

Traction A, B and C

Traction grades are A (the highest), B and C.

They represent a tire’s ability to stop on wetpavement as measured under controlled con-ditions, on specified government test surfacesof asphalt and concrete. A tire marked with aC may have poor traction performance.

WARNING

The traction grade assigned to yourvehicle tires is based on straight linebraking traction tests and does notinclude cornering (turning) traction.

Temperature A, B and C

Temperature grades are A (the highest), B,and C. They represent a tire’s resistance toheat build-up, and its ability to dissipate heatwhen tested under controlled conditions on aspecified indoor laboratory test wheel. Sus-tained high temperature can cause tire mate-rial to degenerate, reducing tire life. Excessive

temperatures can lead to sudden tire failure.Grade C corresponds to a performance levelwhich all passenger car tires must meet underthe Federal Motor Vehicle Safety Standard No.109. Grades A and B represent higher levels ofperformance on laboratory test wheels thanthe minimum required by law.

WARNING

The temperature grade is estab-lished for a tire that is properlyinflated and not overloaded. Exces-sive speed, underinflation, or exces-sive loading, either separately or incombination, can cause heatbuild-up and possible tire failure.


9-36

Z 96.12.20/ X

EMISSION CONTROLSYSTEM WARRANTYYour INFINITI is covered by the followingemission warranties.

For U.S.A.

1) Emission Defects Warranty

2) Emissions Performance Warranty(See Warranty Information Booklet for de-tails.)

For Canada

Emission Control System Warranty

Details of these warranties may be found withother vehicle warranties in your WarrantyInformation Booklet that comes with yourINFINITI. If you did not receive a WarrantyInformation Booklet, or it has become lost,you may obtain a replacement by writing to:

O INFINITI Division, NissanNissan Motor Corporation U.S.A.

Consumer Affairs DepartmentP .O. Box 47038, Gardena, CA 90248-0191

O Nissan Canada Inc.P .O. Box 1709, Station ‘‘B’’Mississauga, Ontario,L4Y 4H6

O INFINITI DivisionNissan Motor Corporation in Hawaii, Ltd.Consumer Affairs Department2880 Kilihau StreetHonolulu, Hawaii 96819

REPORTING SAFETYDEFECTS (For U.S.A.)If you believe that your vehicle has adefect which could cause a crash or couldcause injury or death, you should imme-diately inform the National Highway Traf-fic Safety Administration (NHTSA) inaddition to notifying INFINITI.

If NHTSA receives similar complaints, itmay open an investigation, and if it findsthat a safety defect exists in a group ofvehicles, it may order a recall and remedycampaign. However, NHTSA cannot be-come involved in individual problemsbetween you, your dealer, or INFINITI.

To contact NHTSA, you may either callthe Auto Safety Hotline toll-free at 1-800-424-9393 (or 366-0123 in Washington,D.C. area) or write to: NHTSA, U.S.Department of Transportation, Washing-ton, D.C. 20590. You can also obtainother information about motor vehiclesafety from the Hotline.

You may notify INFINITI by contactingour Consumer Affairs Department, toll-free, at 1-800-662-6200.In Hawaii call 808-836-0848.


9-37

Z 96.12.20/ X

READINESS FORINSPECTION/MAINTENANCE (I/M) TEST(For U.S.A.)Due to legal requirements in somestates/areas, your vehicle may be required tobe in what is called the ‘‘ready condition’’ foran Inspection/Maintenance (I/M) test of theemission control system.

The vehicle is set to the ‘‘ready condition’’when it is driven through certain drivingpatterns. Usually, the ready condition can beobtained by ordinary usage of the vehicle.

If a powertrain system component is repairedor the battery is disconnected, the vehicle maybe reset to a ‘‘not ready’’ condition. Beforetaking the I/M test, drive the vehicle throughthe following pattern to set the vehicle to theready condition. If you cannot or do not wantto perform the driving pattern, an INFINITIdealer can conduct it for you.

WARNING

Always drive the vehicle in a safemanner according to traffic condi-tions and obey all traffic laws.

1. Start the engine when the engine coolanttemperature gauge needle points to ‘‘C’’.Allow the engine to idle until the gaugeneedle points between the ‘‘C’’ and ‘‘H’’(normal operating temperature).

2. Accelerate the vehicle to 55 MPH (88km/h), then quickly release the acceleratorpedal completely and keep it released forat least 6 seconds.

3. Quickly depress the accelerator pedal for amoment, then drive the vehicle at a speedof 53 to 60 MPH (86 to 96 km/h) for atleast 5 minutes.

4. Stop the vehicle and turn the engine off.

5. Repeat steps 1 through 4 at least one moretime.

If step 1, 2 or 3 is interrupted, repeat thepreceding step. Any safe driving mode isacceptable between steps. Do not stop theengine until step 3 is completed.


9-38

Z 96.12.20/ X

10 INDEX

A

Air conditionerAir conditioner specification label....................... 9-28Air conditioner system refrigerant and lubricationrecommendations................................................. 9-22

AM radio reception ....................................................... 3-8Anti-lock brake system ............................................... 4-20Audio system ................................................................ 3-6Automatic

Automatic anti-dazzling inside mirror ................. 2-49Automatic drive positioner................................... 2-45Automatic transmission fluid............................... 7-10Driving with automatic transmission..................... 4-8For your driving comfort - automatic airconditioning ......................................................... 9-11

Avoiding collision and rollover .................................... 4-4

B

Battery ......................................................................... 7-14Battery replacement ...................................................... 2-7Before starting the engine ............................................ 4-7Brake

Anti-lock brake system ........................................ 4-20

Brake booster ....................................................... 7-20Brake fluid............................................................ 7-13Brake pedal .......................................................... 7-20Brake system........................................................ 4-19Brake systems ...................................................... 9-10Brake wear indicators................................. 1-11, 7-20INFINITI anti-lock brake system (ABS)................ 9-10Parking brake ............................................. 4-13, 7-19

Break-in schedule ....................................................... 4-16

C

Capacities and recommended fuel/lubricants ............ 9-16Cargo (See vehicle loading information) ................... 9-30Cassette tape player operation................................... 3-13Changing

Changing engine coolant....................................... 7-6Changing engine oil .............................................. 7-8Changing engine oil fil ter.................................... 7-10

Checking engine coolant level ..................................... 7-5Checking engine oil level ............................................. 7-7Child restraints for infants and small children .......... 2-37Child safety rear door lock........................................... 2-4Cigarette lighters and ashtrays................................... 1-21Cleaning exterior and interior....................................... 6-2

Clearing the programming information...................... 1-31Clock ........................................................................... 1-26Cold weather driving .................................................. 4-22Compact disc (CD) auto changer operation .............. 3-17Compact disc (CD) player operation ......................... 3-15Console box................................................................ 1-23Control of combustion temperature ............................. 9-5Coolant

Changing engine coolant....................................... 7-6Checking engine coolant level............................... 7-5Engine coolant temperature gauge ........................ 1-5

Corrosion protection ..................................................... 6-5Cruise control ............................................................. 4-14Cup holder .................................................................. 1-22

D

Defogger switchRear window and outside door mirror defoggerswitch ................................................................... 1-15

Dimensions and weights ............................................ 9-25Door locks .................................................................... 2-3Drinking alcohol/drugs and driving ............................. 4-5Drive belts .................................................................. 7-16

Z 96.12.20/ X

DrivingCold weather driving ........................................... 4-22Driving with automatic transmission..................... 4-8For your driving comfort - automatic airconditioning ......................................................... 9-11Precautions when starting and driving ................. 4-2

E

Economy hints ............................................................ 4-17Emission control ......................................................... 9-37Emission control information label ............................ 9-27Engine ......................................................................... 9-23

Before starting the engine ..................................... 4-7Changing engine coolant....................................... 7-6Changing engine oil .............................................. 7-8Changing engine oil fil ter.................................... 7-10Checking engine coolant level............................... 7-5Checking engine oil level ...................................... 7-7Engine and drive train ........................................... 9-2Engine coolant temperature gauge ........................ 1-5Engine cooling system........................................... 7-5Engine oil ............................................................... 7-7Engine oil and oil fil ter recommendation ........... 9-19Engine serial number........................................... 9-27

Starting the engine ................................................ 4-8Exhaust gas (Carbon monoxide) .................................. 4-2Explanation of maintenance items.............................. 8-11

F

Flat tire ......................................................................... 5-2Fluid

Automatic transmission fluid............................... 7-10Brake fluid............................................................ 7-13Power steering fluid............................................. 7-12Window washer fluid ........................................... 7-14

FM radio reception ....................................................... 3-7F .M.V.S.S. certification label ..................................... 9-27Foldable outside mirrors ............................................ 2-49For your driving comfort - automatic airconditioning ................................................................ 9-11Freeing vehicle from sand, snow or mud.................. 5-12Front fog light switch ................................................. 1-18Fuel

Capacities and recommended fuel/lubricants...... 9-16Fuel filler cap....................................................... 2-12Fuel filler lid lock ................................................ 2-11Fuel gauge ............................................................. 1-5Fuel requirement .................................................. 9-17

Sequential multiport fuel injection system............ 9-5Fuses........................................................................... 7-21Fusible links ............................................................... 7-22

G

GaugeEngine coolant temperature gauge ........................ 1-5Fuel gauge ............................................................. 1-5

General maintenance..................................................... 8-2Glove box lock............................................................ 2-10

H

Hazard warning flasher switch.................................... 1-19Head restraints ............................................................ 2-16Headlight and turn signal switch ............................... 1-16Heated seats (If so equipped) .................................... 1-19Hood release ................................................................. 2-9How to use multi-remote control system .................... 2-6

I

Idle air control system.................................................. 9-6If your vehicle is ever stolen...................................... 1-32

INDEX

10-2

Z 96.12.20/ X

If your vehicle overheats .............................................. 5-9Ignition switch .............................................................. 4-5Ignition timing control .................................................. 9-5INFINITI anti-lock brake system (ABS) ...................... 9-10INFINITI personalized protection system (IPPS) ........ 1-12Installation on front passenger seat .......................... 2-43Installation on rear seat ............................................. 2-40Installing front license plate....................................... 9-29Instrument brightness control..................................... 1-18Integrated HomeLinkT Transmitter ............................. 1-28Interior light ................................................................ 1-26IPPS (INFINITI personalized protectionsystem)................................................................ 1-14, 4-7

J

Jump starting...................................................... 5-6, 7-15

K

Key ................................................................................ 2-2

L

License plateInstalling front license plate................................ 9-29

LightFront fog light switch .......................................... 1-18Headlight and turn signal switch......................... 1-16Interior light ......................................................... 1-26Light bulbs........................................................... 7-23Other lights .......................................................... 7-25Personal light ....................................................... 1-27Security indicator light ........................................ 1-13Supplemental air bag warning light .................... 2-28Vanity mirror light................................................ 1-28Warning/indicator light and chime........................ 1-7

LockAnti-lock brake system ........................................ 4-20Child safety rear door lock.................................... 2-4Door locks.............................................................. 2-3Fuel filler lid lock ................................................ 2-11Glove box lock..................................................... 2-10INFINITI anti-lock brake system (ABS)................ 9-10Power door lock..................................................... 2-4Trunk lid lock....................................................... 2-10

Luggage (See vehicle loading information) ............... 9-30

M

MaintenanceExplanation of maintenance items....................... 8-11General maintenance.............................................. 8-2Periodic maintenance............................................. 8-5Seat belt maintenance ......................................... 2-37

Major systems and how they work .............................. 9-2Mirror

Automatic anti-dazzling inside mirror ................. 2-50Foldable outside mirrors...................................... 2-49Outside mirror remote control ............................. 2-48Rear window and outside door mirror defoggerswitch ................................................................... 1-15Vanity mirror light................................................ 1-28

Mixture control ............................................................. 9-4Multi-remote control system ........................................ 2-5

O

Odometer....................................................................... 1-4Oil

Changing engine oil .............................................. 7-8Changing engine oil fil ter.................................... 7-10Checking engine oil level ...................................... 7-7

INDEX

10-3

Z 96.12.20/ X

Engine oil ............................................................... 7-7Engine oil and oil fil ter recommendation ........... 9-19

On board diagnostic system......................................... 9-6Operating passenger’s switch..................................... 1-24Operating the transmitter ............................................ 1-30Outboard shoulder/lap belt ......................................... 2-41Outside mirror remote control .................................... 2-48Overheat

If your vehicle overheats ....................................... 5-9

P

ParkingParking brake ............................................. 4-13, 7-19Parking/parking on hills ...................................... 4-18

Periodic maintenance.................................................... 8-5Personal light.............................................................. 1-27Power

Power antenna...................................................... 3-18Power assisted system......................................... 4-19Power door lock..................................................... 2-4Power seat ........................................................... 2-13Power steering fluid............................................. 7-12Power window...................................................... 1-24

PrecautionsPrecautions on seat belt usage........................... 2-29Precautions when starting and driving ................. 4-2

Pre-tensioner seat belt system ................................... 2-22Programming problem diagnosis ............................... 1-30Programming the HomeLinkT Transmitter................. 1-29Push starting ................................................................ 5-9

R

Radio ............................................................................. 3-6AM radio reception ................................................ 3-8FM radio reception ................................................ 3-7Radio operation.................................................... 3-11Radio reception ...................................................... 3-7

Readiness for inspection/maintenance (I/M) test(For U.S.A.)................................................................. 9-38Rear window and outside door mirror defoggerswitch .......................................................................... 1-15Recommended SAE viscosity number........................ 9-21Refrigerant recommendation ....................................... 9-22Reporting safety defects (For U.S.A.)......................... 9-37Roadside assistance program....................................... 5-2Rolling codes (If so equipped)................................... 1-30

S

SafetyChild safety rear door lock.................................... 2-4Reporting safety ................................................... 9-37

Seat belt3-point type with retractor ................................... 2-33Precautions on seat belt usage........................... 2-29Pre-tensioner seat belt system ............................ 2-22Seat belt extenders .............................................. 2-37Seat belt maintenance ......................................... 2-37Seat belts............................................................. 2-29

Seats ........................................................................... 2-13Security indicator light ............................................... 1-13Security systems......................................................... 1-12Sequential multiport fuel injection system .................. 9-5Spark plug replacement.............................................. 7-16Speedometer ................................................................. 1-4Starting

Before starting the engine ..................................... 4-7Jump starting............................................... 5-6, 7-15Precautions when starting and driving ................. 4-2Push starting.......................................................... 5-9Starting the engine ................................................ 4-8

INDEX

10-4

Z 96.12.20/ X

SteeringPower steering fluid............................................. 7-12Telescopic steering column ................................. 2-48Tilting steering column........................................ 2-47

Sun visors................................................................... 2-50Sunroof (If so equipped) ............................................ 1-25Supplemental restraint system.................................... 2-16Supplemental air bag, and (If so equipped) supplementalside air bag systems ................................................. 2-16Supplemental air bag warning light........................... 2-28Supplemental restraint system ................................... 9-12Switch

Front fog light switch .......................................... 1-18Hazard warning flasher switch............................. 1-19Headlight and turn signal switch......................... 1-16Ignition switch........................................................ 4-5Operating passenger’s switch .............................. 1-24Rear window and outside door mirror defoggerswitch ................................................................... 1-15Trunk lid release cancel switch ........................... 2-11Windshield wiper and washer switch .................. 1-14

T

Tachometer.................................................................... 1-4

Telescopic steering column........................................ 2-48The Integrated HomeLinkT Transmitter...................... 1-28Theft warning .............................................................. 1-13Three way catalyst ....................................................... 4-3Til ting steering column .............................................. 2-47Timing belt.................................................................. 9-23Tire

Flat tire................................................................... 5-2Tire placard .......................................................... 9-28Tire pressure ........................................................ 7-30Uniform tire quality grading ................................ 9-36Wheels and tires ........................................ 7-30, 9-24

Tow truck towing ........................................................ 5-10Towing

Tow truck towing ................................................. 5-10Towing load/specification chart........................... 9-33Trailer towing ....................................................... 9-32

Traction control system .................................... 4-22, 9-10Traction control (TCS) ................................................ 1-20Trailer towing .............................................................. 9-32Transmission

Automatic transmission fluid............................... 7-10Driving with automatic transmission..................... 4-8

Trip odometer ............................................................... 1-4Trunk lid lock ............................................................. 2-10

Trunk lid release cancel switch.................................. 2-11

U

Uniform tire quality grading ....................................... 9-36

V

Vanity mirror light ...................................................... 1-28Vehicle identification................................................... 9-26

Vehicle identification number(Chassis number)................................................. 9-26Vehicle identification number plate..................... 9-26

Vehicle loading information ....................................... 9-30Ventilator....................................................................... 3-2

W

WarningHazard warning flasher switch............................. 1-19Supplemental air bag warning light .................... 2-28Theft warning ....................................................... 1-13Warning/indicator light and chime........................ 1-7

Wheels and tires ............................................... 7-30, 9-24When traveling or registering your vehicle inanother country .......................................................... 9-25

INDEX

10-5

Z 96.12.20/ X

Window washer fluid .................................................. 7-14Windshield wiper and washer switch......................... 1-14Wiper

Windshield wiper and washer switch .................. 1-14Wiper blade.......................................................... 7-17

INDEX

10-6

Z 96.12.20/ X

MEMO

Z 96.12.19/ X

GAS STATIONINFORMATION

Fuel requirement

In order to maintain engine and exhaustsystem durability and performance, UN-LEADED PREMIUM gasoline with an octanerating of at least 91 AKI (Anti-Knock Index)number (Research octane number 96) must beused.

If premium gasoline is not available, UN-LEADED REGULAR gasoline with an octanerating of 87 AKI (Anti-Knock Index) number(Research octane number 91) may be tempo-rarily used, but only under the followingprecautions:

● Have the fuel tank filled only partially withunleaded regular gasoline, and fill up withpremium unleaded gasoline as soon aspossible.

● Avoid full throttle driving and abrupt ac-celeration

CAUTION

Use UNLEADED fuel only. Under nocircumstances should leaded gaso-line be used. It will damage yourthree-way catalyst and increase dan-gerous emissions from your vehicleexhaust.

Recommended engine oil speci-fications:

● API SG or SH and Energy Conserving II

● API Certification Mark

● SAE 5W-30 viscosity oil is preferred for allambient temperatures.

See ‘‘Engine oil and oil filter recommendation’’in the ‘‘Technical and consumer information’’section.

Tire cold pressure:

See tire placard located on the front face of therear left wheel housing inside the vehicle.

Recommended new vehiclebreak-in procedure:

During the first 1,000 miles (1,600 km) ofvehicle use, follow the recommendations out-lined in the ‘‘BREAK-IN SCHEDULE’’ Informa-tion found in the ‘‘Starting and driving’’ sec-tion of this Owner’s Manual. Follow theserecommendations for the future reliability andeconomy of your new vehicle. Failure to followthese recommendations may result in vehicledamage or shortened engine life.

Z 96.12.20/ X

QUICK REFERENCE

SIT0052

Hood release 2-9Windshield washer fluid 7-14

Battery 7-14Engine coolant 7-5

Power steering fluid 7-12

Automatic transmission fluid 7-10

Air conditioner 3-3Audio system 3-6

Fuel 2-11, 9-14

Spare tire 5-2, 7-35

Engine oil 7-7

Brake fluid 7-13

Meters and gauges 1-3Trunk lid release 2-10Fuel filler lid release 2-11

Seat belt 2-27

Door lock 2-3

Z 96.12.20/ X

T4639 97 Infinity Q4 - Dealer.com US · 2019-08-05 · c NEVER drive under the influence of alcohol...

Documents

Transcript of T4639 97 Infinity Q4 - Dealer.com US · 2019-08-05 · c NEVER drive under the influence of alcohol...