Installation Manual2

System Requirements

Macintosh HTDM, RTAS

A Digidesign qualified G3 or G4 Power Macintosh (G4 suggested) run-ning Pro Tools|24 MIX, Pro Tools|24 MIX Plus, Pro Tools|24 Mix(with Pro Tools software 5.1 or later), Pro Tools |HD (with Pro Toolssoftware 5.3 or later), ProTools LE with Digi 001 or AudioMedia III(with Pro Tools software 5.0 or later), M-Box (with Pro Tools LE software5.2 or later). Qualified ATA/IDE or SCSI drive, 128 MB RAM (256 MB sugge-sted), Apple System software version 9.0 or later, Apple Mac OS X 10.2.4or later.

Windows RTAS

A Digidesign qualified Intel Pentium III or IV (Pentium IV suggested) orAMD Athlon systems running Pro Tools|24 MIX, Pro Tools|24 MIX Plus,Pro Tools|24 Mix (with Pro Tools software 5.3.1 or later), Pro Tools|HD(with Pro Tools software 5.3.1 or later) ProTools LE with Digi 001 or 002(with Pro Tools software 5.3.1 or later). Windows 2000 Professional SP2 isrequired for Pro Tools|MIX systems, Windows XP home or professionaledition is required for Pro Tools|HD, Digi 001 or Digi 002 systems.Windows 98SE or ME can also be used with the Digi 001 but only using ProTools software 5.1.1. 128 MB Ram (256 MB suggested).

Macintosh VST

Power Macintosh G3 or G4 with MacOS 8.6 or later system software (theVST version is not Mac OS X compatible), 64 MB RAM. Screen settings:800x600, thousands of colors, 20 MB of free hard disk space. Suggested:Power Macintosh G4 with 256 MB RAM and 1024x768 screen. An ASIOcard is recommended for low latency real time play. Optimized for G4.

Windows DX, VST

Intel Pentium III or IV with Windows 95, 98, ME, NT 4.0, 2000, XP,64 MB RAM. Screen settings: 800x600, high colors (16 bit), 20 MB of freehard disk space. Suggested: Intel Pentium IV with 256MB RAM and1024x768 screen. An ASIO card is recommended for low latency real timeplay. Optimized for Pentium III and IV.

Macintosh and Windows Sequencers and Editors

Sequencers and sound editors compatible with VST plug-ins or DX plug-ins, such as Cubase VST PC version 3.7.2 or Mac version 4.1.1, (or later),Logic Audio PC and Mac version 4.5 (or later), Digital Performer (*usingVST wrapper: www.audioease.com), Sonar 2.2 (or later), Sound Forge 5 (orlater), Cool Edit Pro 2 (or later), Peak 2.0 (or later).

Chapter 1

Installation Manual 3

Installation

Macintosh installation notes

Double-click on the Install T-RackS VST icon to install T-RackS VST in MacOS. The installer will ask you to select a VstPlugIns folder: this must be yoursequencer's default folder for VST plug-ins. Documentation for T-RackSwill be placed in the root folder of your system disk.

Double-click on the Install T-RackS for Pro Tools icon to install T-RackSHTDM RTAS in Mac OS and Mac OS X. Documentation for T-RackS willbe placed in the root folder of your system disk.

Uninstallation: run the installer application again, this time selecting the'Uninstall' mode.

You may have to manually delete some files:

T-RackS VST files are in the default VstPlugIns folder.The files TrackS.vpa and TrackS.xrs, and the T-RackS Presets are in theExtensions folder.

In Mac OS, T-RackS RTAS-HTDM files are in the folders:System : DAE : Plug-insSystem : DAE : Plug-in Settings

In Mac OS X, T-RackS RTAS-HTDM files are in the folders:Library : Application Support : Digidesign : Plug-InsLibrary : Application Support : Digidesign : Plug-In Settings

Windows installation notes

Double-click the Setup.exe application to start the installer.The installer will guide you through the rest of the procedure.

Uninstallation: run the installer again, and select the 'Remove' option.

Chapter 2

Installation Manual4

Authorization

Until it's authorized, T-RackS will work in demo mode.To authorize T-RackS you need three codes:

Serial NumberThe serial number is printed on the registration card included in the package.

Digital IDThe Digital ID is a code generated by T-RackS and it is displayed in theauthorization window every time you start a not authorized version of T-RackS. It is unique to each computer system.

Authorization CodeThis is the final code that you can immediately obtain online with yourSerial Number and Digital ID.

Follow this procedure to authorize your T-RackS:

1) Write down carefully (or copy) your Digital ID.

This must be the Digital ID of the system where you are planning to installand use T-RackS.Note that Digital ID and Authorization Code have no letters I and O. Thoseyou might see are actually numbers: one and zero, respectively.

2) Launch your browser and connect to the T-RackS registration page:

http://www.t-racks.com/TRReg.html

Your browser needs to support frames and Javascript; all recent versions ofNetscape Navigator and Internet Explorer will suffice. You will access the T-RackS registration form.

3) Fill in all required fields, including your Serial Number and Digital ID. Allcodes should be entered in capital letters. Remember to include a workinge-mail address: it will be used to send your Authorization Code. PressSubmit.

4) Open your e-mail client software and check for new mail in the addressyou've just inserted in the registration form. You will shortly receive a mes-sage confirming your registration and giving you an Authorization Code.

Important: in this same message you will also find a login id that will grantaccess to your personal area on our web site. Use this login whenever youneed additional authorizations as well as to obtain downloads or contacttechnical support.

Chapter 3

Installation Manual 5

5) If you had closed your applications, launch T-RackS again. Otherwise,just return to the authorization window.

6) Type carefully your Serial Number in the Serial Number field in theauthorization window.

7) Type carefully your Authorization Code in the Authorization Code field inthe authorization window.

8) Press OK. If all information has been entered correctly, T-RackS willnow be authorized. Remember to write down your Authorization Code.

If you use a different computer for music and for the internet, just notedown the Digital ID, move on to your internet computer and use it to visitthe registration page, fill in the registration form (with the Digital ID copiedfrom the other system), and get the e-mail confirming your registration.Then note down the Authorization Code, return to your music computer andcomplete the procedure.

If you have no access to the internet in the T-RackS CD you will find aPDF file called Authorization Code Request Form. Open the file (withAcrobat Reader), print the form, fill in the required fields and faxeverything to +39-59-2861671 to receive your Authorization Code within24 hours of your fax (standard European business hours). Please writeclearly: if we can't decipher the codes, we won't be able to generate aworking Authorization Code.

If you have no access to a fax machine fill in the aforementionedAuthorization Code Request Form and mail it to this address:

IK Multimedia Production srlVia dell'Industria 4641100 ModenaITALY

You'll be given your Authorization Code by return mail within 15 workingdays.

For all other questions contact support@t-racks.com.

Installation Manual6

Version-specific information

Automation

The DX version does not support automated parameters.

Sample rates

All versions support sample rates up to 96k.

Presets

This is where the presets folder is installed:

T-RackS VST Mac OS 9[extensions folder] : Tracks Presets

T-RackS HTDM Mac OS 9[system folder] : DAE : Plug-In Settings : T-RackS Clip[system folder] : DAE : Plug-In Settings : T-RackS Comp[system folder] : DAE : Plug-In Settings : T-RackS Eq[system folder] : DAE : Plug-In Settings : T-RackS Lm[system folder] : DAE : Plug-In Settings : T-RackS Suite

T-RackS HTDM Mac OS X[system disk] : Library : Application Support : Digidesign : Plug-In Settings :T-RackS Clip[system disk] : Library : Application Support : Digidesign : Plug-In Settings :T-RackS Comp[system disk] : Library : Application Support : Digidesign : Plug-In Settings :T-RackS Eq[system disk] : Library : Application Support : Digidesign : Plug-In Settings :T-RackS Lm[system disk] : Library : Application Support : Digidesign : Plug-In Settings :T-RackS Suite

T-RackS DX and VST Windowsuser-selected during installation, default is:[program files]\IK Multimedia\T-RackS Plug-In\TRackS Presets\

Controllers

The following controllers are supported by T-RackS HTDM (Macintoshand Windows)

Digidesign 002Digidesign Pro ControlDigidesign Control 24Mackie HUI

Chapter 4

T-RackS is a registered trademark of IK Multimediawww.ikmultimedia.com

www.t-racks.com

IK Multimedia ProductionVia dellIndustria 46 - 41100 Modena Italytel +39 059 285496 fax +39 059 2861671

info@ikmultimedia.com

All specifications are subject to change without further notice.

2003 IK Multimedia ProductionAll other trademarks are property

of their respective owners.