SpeedNet-SystemSpeedNet-System Blowing-in ProtocolBlowing-in ProtocolProject-No.: SM123456789SM123456789 Start Time: 28.03.2017 11:0528.03.2017 11:05route section: Manhole 1 - Pit 1Manhole 1 - Pit 1Company (Contractor) Lancier Cable GmbHLancier Cable GmbH Operator: Mr. SmithMr. SmithComment: nonenone

Duct ParametersDuct Parameters Cable ParametersCable Parameters Machine/CompressorMachine/CompressorBlow in… Speed Pipe (single)Speed Pipe (single)Duct-Type: SNR10 (10x1,0; 10/8)SNR10 (10x1,0; 10/8)Manufacturer: EgeplastEgeplastSNR-Color: RedRedCable Duct Identification: withoutwithout

Cable: Mini Cable (Ext. D. <6,5mm)Mini Cable (Ext. D. <6,5mm)Manufacturer: FiberHomeFiberHomeCable-Type: A-D(ZN)2Y nx12 ... LgA-D(ZN)2Y nx12 ... LgAmount of Fibers: 7272Cable-Diameter [mm]: 6.56.5meter count: Start: 4300Start: 4300 End: 2508End: 2508

Blowing Machine: MaxicatMaxicat+ Lubricator: nonoLubrication: PreLube 5000PreLube 5000Compressor: Kaeser M15Kaeser M15+ Oil seperator yesyes+ After cooler yesyes

SummarySummaryLength: 1807 m Temperature: 15.4°C 15.4°C GPS Position: 51.78278,7.7345651.78278,7.73456Start Time: 28.03.2017 11:0528.03.2017 11:05 End Time: 28.03.2017 11:40 Total Time: 2112s = 0.59h

Automatically generated by a Maxicat machine of: LANCIER CABLE GmbH | Gildestraße 15 | 48317 Drensteinfurt

MaxiCat C3

with automatic recording of the

Fiber Optic Cable Laying

NEW

Screenshot 1 Screenshot 2

Fiber Optic Cable Laying

Upgrade Kit for existing cable blowing machines

The upgrade has to be done by the qualified stuff of LANCIER

MiniCat• by upgrading, the exsisting machine needs to be modified in

order to connect the extern electronic device.

MaxiCat• the upgrade is available either as direct-mount-set or external

unit

MaxiCat C3

• longer drive belts for a better thrust transmission• exchangeable clamps for various duct diameters• large air outlet for better blowing-in performance• powered top and bottom drive belts• electronic display for blowing speed and length

MaxiCat C3 with automatic recording

Due to the new integrated electronic recording system, the MaxiCat is one of the most innovative fiber optic cable blowing machine in the world market. The machine is approved by German Telecom. All relevant data and parameters will be recorded in a PDF file.

NEW

Features1. Recording of the blowing-in process

• blowing length; blowing speed• motor pressure • thrust• duct pressure • environmental data (GPS; temperature)

2. Pre-selected settings• duct-, cable information• project , route section• compressor, etc.

3. Live diagramm preview 4. Internal memory for re-selecting

Accessories

Cable-Ø Duct external-Ø Blowing speed Thrust Order No.

5 - 12 mm 10 - 20 mm 0 - 100 m/min. 0 - 40 daN 77550

Blowing System Power-Supply Upgrade Kit Order No.

MiniCat battery mode / external external 77646

MaxiCat battery mode / external internal/external 77831

Sealing and Tool Kit• for cable-Ø 5 - 12 mm• duct external-Ø 10 - 20 mm

Mounting Frame• for laying cables in ducts

with an external diameter of 32, 40 and 50 mm

• also for laying 2 cables simultaneously