P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

OTHER PRODUCTS FEATURED IN THIS BROCHURE:

Series XXI Pedestal, Lateral and Vertical Files

Series XXI Kiosks

Acclaim Pedestal Files

Sterling Seating

Dakota Seating

OE-00321/WD/S44/SG/ULI1098

©1998 OEI, Green Bay, WI, 54302

20% POST CONSUMER WASTE

PLEASE RECYCLE

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

FUNDAMENTAL Fundamental-serving as an original or generating source.

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

With System XXI components, avast array of office settings can becreated—from basic workstations tomanagerial offices; receptioniststations to multi-unit team pods;simple to complex—System XXIcan adapt to meet these requirements.

System XXI was designed with theneeds of the office worker in mind.Flexibility, efficiency, productivity,aesthetics—were all commondenominators in the creation ofSystem XXI. In addition, assituations change, System XXIchanges. Recent introductionsinclude: stackable panels, variouscurvilinear worksurfaces includingcurved corner, piano and shoe

Variables such as building structure,job functions, work flow/trafficpatterns, storage needs, noise control,electrical codes, communicationand computer needs, lighting, ADArequirements and visual/acousticalprivacy requirements were allconsidered when System XXIwas developed.

shaped, additional worksurfaceedge treatments, radiused frontoverheads, power and data accesspanels and multiple storage options.

When your office needs call for themost technologically advancedfurniture system, make your choiceSystem XXI.

Interior designers are always

on the lookout for office

furniture that provides a

comfortable, ergonomic

work area—

Yet, can utilize the least

amount of floor space

possible. Expansions,

downsizing, mergers,

acquisitions—

All are common terms used

now and will continue to be

used into the future.

Office furnishings must be

able to adapt to these

changes.

Ergonomics—the buzzword

and standard that office

furniture must measure up

against.

With so many factors to

take into account, which

office panel system do

interior designers specify?

SYSTEM XXI

—A panel system that meets

the needs of office workers

today—and tomorrow.

All hang-on components (such as overheads, shelves, worksurfaces and tackboards) areheight adjustable in 1" increments on all System XXI panels.

Stackable panel sections allow you to easily convert a shorter panel (used in teaming areas) to a taller panel for full privacy.

System XXI Panel Information

Panels range in height from 32" to84" and widths of 12" to 60" andare available in fabric acoustical,fabric/laminate, curved, glass andopen frame panels to accommodatemost office situations. Three- andone-half inches of panel glide adjusta-bility accommodates uneven floors.

Additional panel heights can beachieved or existing panel heightsmatched through the use of theSystem XXI stackable panel sections.

A durable, roll-formed, steel frameprovides the basis for the System XXIpanel core. The internal data/communication wireways are alsoproduced with roll-formed steel.

The System XXI panel wasdesigned with acoustical control inmind. The aluminum foil septumacts as a sound barrier. Two layersof fiberglass insulation on each sideof the panel absorb high and lowfrequency sounds. This combinationprovides a quiet work environmentfor your entire office. A vinyl panelhinge not only acts as a sound barrier,but also provides a light shieldwhen two panels are joined together.System XXI panels have beenengineered to provide .80 NRC and23 STC ratings—which meansacoustical efficiency in your office.

With employee safety in mind,System XXI panels were designedto meet or exceed applicable ANSI/BIFMA standards. System XXI panelsalso meet or exceed UL 1286requirements.

FUNCTION Function-one of a group of related actions contributing to a larger action.

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

FUSION Fusion-a merging of diverse elements into a unified whole.

Series XXI pedestal files are available in the Kiosks allow for employees tofollowing options: file/file; box/box/file; have all their belongings in onebox/file and pencil/box/file—in four different area. The kiosk shown hasstyles: freestanding, mobile, worksurface shelf units, lateral file drawerssupporting and hanging. and a lockable closet area.

System XXI Storage Options

Storage is a necessary componentof every office. By combining over-heads, open shelves, center drawers,pedestal files, lateral files, verticalfiles and kiosks, storage is not aproblem with System XXI.

Overheads are available with flipperdoor fronts (which open above thecabinet) or radiused front doors(which recede into the cabinet).Both styles are available with lami-nate, steel or fabric covered fronts.

Series XXI pedestals, laterals, verticalsand kiosks provide additional filestorage. Pedestals are available infour different styles: mobile, free-standing, hanging and worksurfacesupporting with various combinationsof drawer types. Laterals may bespecified in two, three, four and fivehigh models—in three differentwidths (30," 36," or 42"). Drawers,receding doors, posting shelves andcupboard options can also be addedto Series XXI lateral files. Vertical filescome in four heights and two differentwidths (15" and 18"). Kiosks have acloset option that may be combinedwith drawer or shelf options tomeet the user's specific needs.

Corner shelf units may be added topanel configurations to make use ofthe often wasted space above theworksurface.

Worksurfaces are available in a varietyof sizes in rectangular, curved,D-shaped, corner, piano, shoe andkeyboard shapes. PositionMateTM,a two-layered keyboard surface,offers a unique, contemporarydesign along with 123/4" of adjustability.PositionMateTM allows the user toadjust the keyboard unit of theworksurface to his or her ownsit/stand height. Perfect for all dataentry operations.

Various edge treatments may beordered to suit the individual customer preference.

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

FLEXIBLE Flexible-capable of responding or conforming.

System XXI is available with ERP panels offer an additional Bottom open frame access panels allow direct access from wall Extendible posting shelves are3 different electrical options 4" of raceway for the routing of faceplates or boxes into the vertical wireways of the panel. available on all Series XXI lateral(from left to right): an 8 wire communication/data cables. Telephone and data outlets are combined into one by using data files. Perfect when you need asystem with 3 convenience This is done through a wire- manufacturers’ faceplates on the System XXI raceway cover. space to rest a notepad, thecircuits and 1 isolated ground way that is separated with a shelf fits into a 1 1/2" openingcircuit; a 10 wire 442 system continuous steel septum from on the lateral file.with 2 convenience circuits and the electrical wireway.2 isolated ground circuits—(each circuit has its ownindependent neutral wire); anda 10 wire 622 system with 3convenience circuits and 3isolated ground circuits.

System XXI Power and DataInformation

The office of the future will beequipped with the most up-to-datetechnology available. All those cordsand cables need to be channeledsomewhere—preferably out of sightand off the worksurface. Thesetotal-electronic offices requirecomplex electrical routing systems.All System XXI panels provide interiorwireways for the routing of dataand communications cables.

For the office with ever-expandingdata and communication require-ments, System XXI offers theextended raceway panel (ERP) withtwo separate data and electrical race-ways at the bottom of the panel.

The System XXI electrical offeringcomes in 8- and 10- wire versions.The multiple configurations of circuitryallow the user access of up to sixcircuits at any receptacle location.

Grommets, available in round orslimline versions, offer a central areain which to feed cords and cablesthrough the worksurface to poweroutlets.

System XXI data access panels areavailable for the mounting of datafaceplates in three different locations:in the bottom raceway of the panel;above the worksurface and belowthe worksurface. The two work-surface height options allow themounting of data faceplates directlyon the fabric surface of the panel.All data cabling is concealedinternally within the panel.

The System XXI PowerUpTM optionprovides both data jacks and aduplex receptacle in a flip-topmodule. PowerUpTM can be mountedin any System XXI worksurface.

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

FORM Form-the structural element, plan or design of a project.

Countertopextends 4"

Overhead mounted task lights Laminate covered doors create Countertops can be installed Countertops are available inattach flush under overhead complete privacy and are avail- to provide easy access for straight, curved and right-angleunits for additional lighting for able with handles that meet physically challenged individuals. configurations. They extendthe worker. ADA requirements. only 4" into the aisleway to

eliminate protruding hazardsfor the visually and physicallyimpaired.

System XXI Optional

Accessories

Paper management choices cover a

wide range of options—from pencil

cups to paper trays (horizontal,

diagonal and vertical); binder bins to

CD storage. These optional pieces

can be freestanding on the work-

surface or panel-mounted from

several different toolbars—to fit the

needs of the individual user.

An optional center drawer (with

inset pencil tray) attaches easily

under the worksurface and provides

additional small item storage. All

lockable accessories and storage

options may be keyed-alike for

individual office space.

The flexible CPU sling and the CPU

security unit both offer CPU storage

under the worksurface—freeing up

valuable worksurface space.

Monitor lifts are another option that

provide adjustability to fit the needs

of the user. The lift adjusts the

computer monitor from 4"-11"

above the worksurface.

Tackboards, keyboard pads, coat-

racks, markerboards and nameplate

accessories are also available to

complement System XXI.

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

Flipper doors are availablein steel, laminate or fabriccovered fronts to meet thedesign requirements of alloffices.

Binder bins, diagonal A fresh design for paperstorage and letter trays management! Pencil cups,provide basic paper CD holders and multi-management options to compartment trayskeep worksurfaces free accompany binder bins,of clutter. diagonal storage and letter

trays to complete thepaper management offering.

Mobile pedestals withcushioned tops providea temporary seatingsolution when spaceis at a premium.

An ergonomic leader! Need more storage space?PositionMateTM allows for Consider a corner shelfthe keyboard worksurface unit—which can be adjustedto adjust to the users’ to accommodate computerspecifications—sitting monitors and other or standing. Meets ANSI/ equipment.BIFMA standards for primaryworksurfaces up to 48"wide.

A sliding tool rail mountsand moves easily and can Lightweight, radiused frontbe ’’stacked‘‘ for more flipper doors open andefficient use of space. recede into the overhead unit.

Low shelf units can bemoved up or down in 1"increments on the panelto fit the needs of theemployee.

Peninsula ends create aperfect ’’conference‘‘ table Acclaim pedestal files offerfor those unexpected full drawer pulls and anmeetings. extra caster for stability.

An articulating keyboardarm allows users to adjusttilt and height, and pushthe tray under the surfacewhen not in use. Themouse pad slides freely to accommodate left- andright-hand users.

SOLUTIONS ACCESSIBILITY

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI

PowerUpTM brings power/data access to the worksur-face. The flip-up modulecontains one duplex 110-voltreceptacle and two data The acoustical panel isports to fit Lucent engineered to provide .80Technologies data jacks. NRC and 23 STC ratings.The standard three-prong These high absorption andplug electrical cord comes barrier ratings contributein three lengths and provides to an acoustically efficientpower to the module. environment.

Grommets can be specified Slimline grommets areon any System XXI located flush with theworksurface. They provide panel and lift up easilya great option where more when access for cablescable access is needed. and wires is required.

Data access panels areavailable with above or belowworksurface height access.They allow attachment ofsingle-gang, double-gangand surface-mount databoxes and plates to the Worksurface support panelsface of the panel, with all end the run of worksurfacescables routed inside the and lend additional supportpanel, out of sight. to the panel.

The Flexible CPU sling The CPU security kit Worksurfaces feature threepermits a CPU (up to 65" adjusts to fit most any CPU edge treatment options:circumference) to be unit and can be installed in 3mm PVC, post-formedconveniently located the field. The security kit can and T-edge (bullnose).anywhere along the under- be adjusted to discourageside of a worksurface. the removal of the internal

circuit cards as well as theentire CPU.

The base feed routespower to the panel wirewayfrom the wall or floorjunction box locations.

Top power feeds routecables up to the ceiling formaximum flexibility.

The monitor lift optionallows for the user to movetheir computer monitor arange of 4"-11" above theworksurface.

PRODUCTIVITY DETAILS

P A N E LS Y S T E M SF U R N I T U R ESYSTEMXXI