SYSTEMS OPTIMA WOODWORKS and METALWORKS · Custom Trapezoid Lay-in, Custom Trapezoid Tegular 6"...
Transcript of SYSTEMS OPTIMA WOODWORKS and METALWORKS · Custom Trapezoid Lay-in, Custom Trapezoid Tegular 6"...
OPTIMA®, WOODWORKS ®
and METALWORKS™
Radia l Custom Ce i l ings
CEILING SYSTEMS
B e t w e e n u s , i d e a s b e c o m e r e a l i t y ™
Cover:WoodWorks® Radial Custom in Natural Variations™ Light CherrySt. Mary’s Episcopal School, Windland Smith Rice Building, Memphis, TN
There were many criteria we considered in
our selection process for the appropriate
ceiling in the lobby of the University of Utah
Hospital. This is the introduction to the
building, an opportunity to make a new and
dramatic first impression. We had some
way-finding challenges to address.
We wanted a treatment that suggested
movement toward the central core. The
ability to customize the ceiling panel in the
radial shape was a major consideration.
We used the ceiling design as well as the
floor to facilitate intuitive movement
through the space. In addition, we needed
a clean, crisp aesthetic to complement
the architecture. Not to be overlooked was
the need for a high acoustic rating for a
lively space.
Michael Costantino, NCIDQ, LEED® AP
Principal, Architectural NEXUS
OPTIMA
WOODWORKS
METALWORKS
2
Optima® Radial Custom on Prelude® grid in Silver Satin and with 8" Axiom® Classic in White
University of Utah Hospital, West Pavilion, Salt Lake City, UT
MetalWorks™ Radial Custom in White and Silver Grey
Optima® Radial Custom in Whitewith Prelude® XL® grid in Adobe
WoodWorks® Radial Custom in Cherry Quarteredwith Clear Satin finish
Ty p i c a l A p p l i c a t i o n s• Office
• Education
• Hospitality and retail
• Healthcare
• Transportation
Radia l System Overv iew
Product Panels Length Width System Capabilities Suspension System
Optima Custom Trapezoid Lay-in, Custom Trapezoid Tegular
6" intervalsfrom 24"- 66" 12"- 48"
• Meets taper up to 5° • Minimum inside radius 12"• Center must be a separate
component
Interlude®, Suprafine®, Prelude® (accessible) with custom Cross Tees
WoodWorks Custom Trapezoid Job specific up to 8'
Job specific up to 4'
• 360°• Center must be a separate
component• Edges can be curved
DP59 (non-accessible) Access Hook-On (accessible)
MetalWorks Custom Trapezoid Job specific Job specific• 360°• Center must be a separate
componentRH200 (accessible)
3
METALWORKS™
MetalWorks Radial Custom in Silver Grey
Radia l Custom
Standard Fin ish Se lec t ion
Key Se lec t ion At t r ibutes
• Trapezoidal panels create radial effect
• Distinctive, aesthetic visual
• System typically utilizes the RH200 J-barand RH215 suspension systems
• All panels are 100% downward accessible
• Panel size determined by design choice
• Variety of perforations and colors available
• NRC 0.65-0.90 available for perforatedpanels
• Durable, Washable, Scrubbable,Soil-resistant
• Engineered and tested for use in seismic zones
• Class A fire performance
White(WH)
Silver Grey(SG)
Gun Metal Grey(MY)
Per fora t ion Opt ions(Actual 1:1 scale shown)
Microperforated Round-Diagonal
138
Extra MicroperforatedRound-Straight
Rg 0701
Unperforated
Custom RAL Colors (partial list)
RAL 1011 RAL 1012 RAL 1021RAL 1000 RAL 1001 RAL 2000 RAL 2002
RAL 3001 RAL 3014 RAL 4005 RAL 4007 RAL 5001 RAL 5002 RAL 5012 RAL 5014
RAL 6017
RAL 9001 RAL 9018
RAL 1027 RAL 1033
RAL 3005
RAL 5022 RAL 6000RAL 5018 RAL 6004
RAL 7042 RAL 8023
RAL 6019 RAL 6032RAL 6027 RAL 7005
RAL 7023 RAL 7031 RAL 8001 RAL 8003 RAL 8028
Refer to CS-3957 for a sampling of Custom RAL colors. Contact Armstrong ArchitecturalSpecialties at 1 877 ARMSTRONG, select options 1-1-4 for custom color matching requests.
Cus tom Fin ish Se lec t ion Due to printing limitations, shade may vary from actual product.
Note: For additional perforation and color options, visit armstrongceilings.com/metalworks or contact Architectural Specialties at 1 877 ARMSTRONG and select options 1-1-4.
Round-Straight Rg 2516
Round-Staggered Rv 4058
Square-Straight Qg 4025
4
WoodWorks Radial Custom in Natural Variations Light Cherry
WOODWORKS®
Radia l Custom
Per fora t ion Opt ions(Actual 1: 8 scale shown)
Key Se lec t ion At t r ibutes
• Rich, natural wood veneer finishes
• Custom veneer options and veneer management available to coordinate withmillwork or other existing wood surfaces
• FSC-certified options available
• Variety of trapezoidal sizes, up to 8'length, and up to 4' width
• Perforation options provide NRC 0.40-0.65 based on pattern and infill selected
• Engineered and tested for applications inseismic zones
• ASTM E84 surface burning characteristics: Composite Class A per ASTM E1264.Flame Spread Index 25 or less. SmokeDeveloped Index 450 or less
S tandard Veneer Se lec t ion
* Premium veneer option
Natural Variations™ (Real Wood Veneers)
Beech(NBE)
Light Cherry(NLC)
Maple(NMP)
Dark Cherry(NDC)
Patina(BAP)
Native*(BAN)
Bamboo(Rapidly Renewable)
Constants™ (Real Wood Veneers)
Maple(CMA)
Cherry(CCY)
Walnut(CWA)
Custom Veneer Se lec t ion (par t ia l l i s t )
Note: In addition to standard options, custom veneers, perforations and continuous upturns are available on WoodWorksproducts. Contact Architectural Specialties for details at 1 877 ARMSTRONG and select options 1-1-4.
Custom Anigre
Quartered Figured
Custom Cherry
Quartered
Custom Sapele
Quartered
Custom African
MahoganyQuartered
Custom Red Oak
Rift
Round-StraightRg 6006 (W2)
Round-StraightRg 6011 (W4)
Round-DiagonalRd 6006 (W3)
Oval-Straight SlottedLg 9508 (W6)
Oval-Straight SlottedLg 9512 (W5)
Unperforated (W1)
5
K e y S e l e c t i o n A t t r i b u t e s
• Smooth, non-directional finish on scratch-resistant surface
• DuraBrite® surface for excellent durabilityand superior light reflectance (reduceslighting and energy costs up to 18%)
• Outstanding acoustical performance inboth Articulation Class (190-200) and NRC(0.90-0.95)
• Durable:– Washable, Impact-resistant – Scratch-resistant, Soil-resistant
• Humidity-resistant HumiGuard® Plus performance to inhibit panel sag
• ASTM E1264 Classification – Type XII,Form 2, Pattern E
OPTIMA®
Radia l Custom
S t a n d a r d F i n i s h S e l e c t i o n
White(WH)
6
Optima Radial Custom in White with Prelude® grid
1-sided 2-sided
equal
12" min
30"24"
36"42"48"54"60"66"
24"–
66"
12'– 0"
12"
5° max
1-sided 2-sided
equal
2.5° maxeach
2.5° max
Taper:
• The maximum taper angle per side for all trapezoids is 2.5 degrees• For two-sided trapezoids, the taper angle must be equal on both sides
(i.e., symmetrical) for a maximum of 5 degrees
* Note: These do not apply to WoodWorks® or MetalWorks™ Radial ceilings. Please consult with Architectural Specialtiesat 1 877 ARMSTRONG and select options 1-1-4, or visit armstrongceilings.com/radial for more details.
One-sided or symmetricaltwo-sided trapezoid
Width 12"-48"
Length 24"-66" in 6" increments
Minimum radius 12'-0"(12" minimum panel edge)
Taper maximum 2.5° angle per side
Opt ima ® Radia l Overv iew The following are key design factors to consider for Optima Radial ceilings.Please review these system capabilities and limitations carefully.* For additionalinformation, consult the Optima Radial Technical Guide, CS-4161.
One-sided:
• A one-sided trapezoidal panel is available• Refer to Optima Radial Technical Guide for additional capabilities
Two-sided:• A two-sided trapezoidal panel is available• Each tapered side MUST be symmetrical• Refer to Optima Radial Technical Guide for additional capabilities
Width:
• Trapezoid panels are available in widths from 12" to 48"
Length:
• Trapezoidal panels are available in 8 lengths from 24" to 66"• Lengths are only available in the following 6" increments:
24," 30," 36," 42," 48," 54," 60" and 66"
Minimum radius:
• The minimum achievable radius is 12'. This is based on a minimumpanel edge of 12" with the maximum tapers noted below
• Optima Radial CANNOT be used inside this 12' radius –drywall may be a suitable alternative
7
armstrongceilings.com/radial
• Latest product and program news
• Real-time selection and specification information
• Glossary of technical terms
• Contacts – reps, where to buy, who will install
• Submittal pages
• Specification writing tool
• Product literature and samples – try Swatch It™ on the web
Online tool that allows you to visually create and download MetalWorks and WoodWorks ceiling and wall swatches –color, perforation and pattern – watch as your swatch comes to life! armstrongceilings.com/swatchit
LEED® is a registered trademark of the U.S. Green Building CouncilAll other trademarks used herein are the property of AWI Licensing Company and/or its affiliates © 2010 AWI Licensing Company • Printed in the United States of America
TechLineSM / 1 877 ARMSTRONG
1 877 276 7876
armstrongceilings.com/radial
CS-3648-110
B e t w e e n u s , i d e a s b e c o m e r e a l i t y ™
CEILING SYSTEMS