System Identification

Testing and Adjusting 320D, 323D, 324D, 325D, 328D LCR and 330D Excavators Tool Control System

System Identification SMCS - 5000-546

Shutdown

Previous Screen

Product: EXCAVATOR Model: 330D L EXCAVATOR B6H Configuration: 330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine

Media Number -RENR7389-04 Publication Date -01/04/2006 Date Updated -20/04/2006

i02399453

Table 1

Identification for the Tool Control System 320D through 330D

Tool Control

System

Device for Activation of the Work Tool

Number of Pumps that Supply Oil Flow to the Work Tool

Possible Oil Flow

Direction

Medium Pressure Circuit

1 Hydraulic Pedal 1 Pump 1 Way NO

2 Two Hydraulic Pedal 1 or 2 Pump 1 or 2 Way NO

3 Foot Switch 2 Pump 1 Way NO

3' Hydraulic Pedal 2 Pump 1 Way NO

5 Joystick Thumbwheelor Electric Pedal

1 Pump 2 Way NO

11 Two Hydraulic Pedal 1 or 2 Pump 1 or 2 Way YES

14

Joystick Thumbwheel (2 Way) Inside Switch on the Right Joystick (1 Way)

1 or 2 Pump 1 or 2 Way Optional (1)

16 Hydraulic Pedal 2 Pump 1 Way NO

17 Joystick Thumbwheel (2 Way) Inside Switch on the Right Joystick (1

1 or 2 Pump 1 or 2 Way Optional (1)

Página 1 de 3330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4...

24/10/2007https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

Note: System 14 and System 17 use an independent control valve if the optional medium pressure circuit is present.

System 1, System 5 and System 16 use only attachment control valve (1) .

System 2, System 3, System 3 Prime, System 14 and System 17 use only attachment control valve (1) and auxiliary control valve (2) .

System 11 use attachment control valve (1), auxiliary control valve (2), and the auxiliary control valve (medium pressure) (3) .

Way)

For more detailed steps in the operation of the devices for activation of the work tool, see Systems Operation Section, "Switches".

( 1 ) System 14 and System 17 have a medium pressure circuit as an option. Not all machines that are equipped with System 14 and System 17 have medium pressure.

Illustration 1 g01198467Main Control Valve as view from the front of the valve

(1) Attachment Control Valve

(2) Auxiliary Control Valve

(3) Auxiliary Control Valve (Medium Pressure)



320D, 323D, 324D, 325D, 328D and 330D excavators can have a tool control system on the machine. Refer to the table in order to determine the tool control system. The tool control system is set by the factory and stored in the ECM.

Refer to the Systems Operation for a description of each system.

The tool control system should only be changed on the monitor if certain components on the machine are changed first.

Each tool control system has ten "TOOL#s". Some tool control systems have parameters that can be set for each "TOOL#". In order to customize the "TOOL#" for a particular work tool, change the parameter values for the work tool. The default parameters of the work tool that can be changed are explained for each tool control system.

The correct "TOOL#" must be selected during the operation of the work tool. Parameters for the "TOOL#" must be properly programmed. Refer to the specifications of the manufacturer in order to set the parameters of the "TOOL#".

Copyright 1993 - 2007 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.

Wed Oct 24 08:47:11 EST 2007



System Identification

Documents

Transcript of System Identification