System Area Manager

Hardware and Network Details

2

System Details Tab

• The System Tab displays System Information including:

– Machine Name– User– Domain/Workgroup– Manufacturer– Machine Model– Serial Number– Inventory Number– Operating System, version and

service pack– Asset Number– Date Installed– Asset value– Owner– Location– Function– System Client version

3

System Detail Tab

• Board Info– Manufacturer, Model, Serial Number

• BIOS – Manufacturer, Revision, Release Date and SMBIOS

Rev

• CPU– Processor Model, Manufacturer, Current CPU

Utilization, Clock Speed, and Number of Logical CPUs

• Memory– Total Physical and Virtual Memory available verses

currently in use– Number of memory slots and maximum supported

memory

• Slots– ID, Width and Status

• USB• Serial Ports

– Name and Max Baud

• Display Adapter– Description, Driver, Monitor Name, Model, Memory

and Monitor Serial Number

Hardware Details Tab

• All environmental sensors discovered on your platform are displayed in the Hardware Tab. This includes fans, temperatures, voltages, power redundancy loss and physical security. The number and type of sensors displayed is dependent upon the system platform and its configuration.

4

5

Hardware Sensors

• The SyAM Software utilizes various standards to access hardware sensors such as IPMI 1.0, 1.5, 2.0, it also access sensors using propretary Super IO device support

• Hard Drive Sensors are directly accessed on the hard disk utilizing the SMART standard

• CPU Core Temperatures are accessed diretcly from the CPU cores MSR’s

• The wattage value is retrieved from Enterprise Servers with Node Manager support or from the intelligent agent within the SyAM Software that calculates based upon the systems configuraiton, utilization and running state

Network Details Tab

• The Network Tab displays detailed information on adapters connecting the managed system to the network, including adapter and connection speed, connection status, IP address, and MAC address. Additionally the send and receive byte counts and calculated utilization over the last approximately 60 seconds is provided.

6