Asset / Package

Name: ISO 12944 - System C

Location: Prepared By: Thick,James

Our Ref: 030814-JTHICK-C1F4A Prepared On: 14 Jan 2008

System C: Structural SteelA high durability (above 15 years) coating specification designed for environments classified by ISO 12944-2 as C3 medium corrosivity.

Surface Preparation & Comments• Abrasive blast clean to Sa2.5 (ISO 8501-1:1988) or SSPC-SP6. If oxidation has occurred between blasting

and application, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner.

• Stripe coats should be applied to all welds, lap joints, plate edges, corners, sharp edges, and any other areas where spray application of the overall coating system may prove difficult resulting in low dry film thickness'

• For further information on International's products and services visit www.international-pc.com

Product Name Description Coat

Type VS%

DFTmicron

TSRm2/l

Overcoating interval at 10C Min - Max

Overcoating interval at 25C Min - Max

Intercure 200HS

Rapid Recoat Epoxy

Full Coat 80 150 5.33 5 Hour(s) - Extended * 3 Hour(s) - Extended *

Interthane 990 Polyurethane Full

Coat 57 50 11.40 16 Hour(s) - Extended * 6 Hour(s) - Extended *

200

For further information regarding prices, availability and technical information please consult International Protective Coatings. We may at our discretion provide free of charge technical service support to customers consisting of the provision of a technical service representative who may periodically or on a reasonable request visit the site and liaise with the customer concerning product requirements, application training and general advice concerning our products. We accept no liability whatsoever in connection with the provision of or a failure to provide such free of charge technical support. We reserve the right to reassess this offer should the costs to us change significantly during the quotation period. Subject to our Standard Terms and Conditions which are available on request. Please also refer to our current Product & Material Safety Datasheets prior to using any products. * See International Protective Coatings Definitions and Abbreviations.