Sys 1 Tt Vol 2 Issue 6 Jun11
3
BENTLY NEVADA SYSTEM 1® TIPS & TRICKS June 2011, Volume 2, Issue 6 Dear System 1 User, The June issue of System 1® Tips and Tricks focuses on reciprocating compressor plots, so it will not apply to all of our users. In this issue we’ll show you how to create or re-create the recommended Best Practice Recip plots. This a simple process, just follow the steps below. We hope you enjoy this issue. Sincerely, Your Southern Region FAE team This month’s tip by: John Kitchens, Field Application Engineer, Sugar Land, TX Versions: 6.51 SP2 and later Applies to: System 1 Data Plots User Level: Power User Diagnostic User IT Group Mid Level User Occasional User New User How to create or re-create the recommended Best Practice Recip plots 1 In System 1 Display select the Management Layout View and expand the hierarchy to reveal the reciprocating compressor of interest.
-
Upload
chrisengdahl -
Category
Documents
-
view
201 -
download
2
Transcript of Sys 1 Tt Vol 2 Issue 6 Jun11
BENTLY NEVADA SYSTEM 1® TIPS & TRICKS
June 2011, Volume 2, Issue 6
Dear System 1 User, The June issue of System 1® Tips and Tricks focuses on reciprocating compressor plots, so it will not apply to all of our users. In this issue we’ll show you how to create or re-create the recommended Best Practice Recip plots. This a simple process, just follow the steps below. We hope you enjoy this issue. Sincerely, Your Southern Region FAE team This month’s tip by: John Kitchens, Field Application Engineer, Sugar Land, TX
Versions: 6.51 SP2 and later Applies to: System 1 Data Plots
User Level: Power User Diagnostic User IT Group Mid Level User Occasional User New User
How to create or re-create the recommended Best Practice Recip plots
1 In System 1 Display select the Management Layout View and expand the hierarchy to reveal the reciprocating compressor of interest.
2 Select the compressor of interest at the compressor level in the hierarchy. See the screen shot to the right.
3 Right click on the compressor to bring up the pop-up menu. Left click on “Create Plot Sets” and left click on “Both”. Wait for the computer to complete the tasks.
4 This will create the recommended plot sets. Then any additional plots that you prefer, such as trend plots, rod position, or rod load can be created from the machine hierarchy and added to the plot group.
DID YOU KNOW? Bently Nevada offers Supporting Service Agreements. A Supporting Services Agreement (SSA) is a custom-tailored combination of individual remote and site-based service offerings that addresses the unique needs of your site and your installation. We work with you as a partner to keep your instrumentation performing optimally at all times and to provide hands-on assistance that helps you realize the full potential of your condition monitoring system. You can find more information on SSA’s at this link: http://www.ge-mcs.com/en/bently-nevada-services-and-support/services-and-support/service-agreements.html
Bently Nevada Technical Support: [email protected] 775-215-1818
Bently Nevada website: http://www.ge-mcs.com/en/bently-nevada.html System 1 Blog (You’ll need to join the forum): http://supportcentral.ge.com/blog/blogs_frame.asp?prod_id=20858
