SYNTECH · Overview of FEIN machines and sets 14 Compact angle grinder WSG 14-70 E 16 Sets and...

Machining stainless steel surfaces with FEINFor results that shine

METAL

SYNTECH

2

CONTENTS

stainless steel shines with possibilities. Make the most of them with FEIN tools and expertise

With robust solutions from FEIN, it’s simple and easy to get stuck in.

Sanding down welded seams, cutting out profi les, or polishing and satin-fi nishing surfaces to a mirror polish – our durable and practical solutions take account of the particular char-acteristics of the material (such as heat build-up during surface machining of stainless steel plates), giving you the keys to one of the most exciting markets of the future.

Stainless steel is corrosion-resistant and hard-wearing, and literally shines with design possibili-ties. But until now only users with decades of hands-on experience had the necessary practical expertise. As an experienced partner to the metal industry, FEIN has an in-depth understand-ing of the requirements of stainless steel machining and offers a range of optimum solutions in this area. These solutions include durable, robust FEIN products and also special accessories and accessory sets that are specifi cally tailored to typical stainless steel applications. Whether you need to give a mirror fi nish to large surfaces or machine pipes or profi les in hard-to-reach places such as hand rails, FEIN can help you achieve optimum results in a fraction of the time.

Typical applications range from coarse sanding to satin-fi nishing for a mirror polish. Our tools use cool grinding to avoid warping of the metal. Flexible-use machines such as the FEIN sanding polisher and the perfectly matched modular sets are your guarantee of optimum results.

Optimum grinding of welded seams without damaging adjacent surfaces; perfect satin-fi nishing and polishing for pipe bends – for these tasks, the tools have to be just right for the surface. With FEIN belt grinders you can grind transitional areas that used to require manual machining, in a single proc-ess, without dismantling.

Cleaning, removing tarnishing and deburring … FEIN power tools such as straight grind-ers offer unique robustness and take up little space. With these tools in your toolkit, even grinding transitions in hard-to-reach places is an easy job.

Machining surfaces Machining pipes and profi les Machining corners and edges

SYNTECH

3

Applications

Machining surfaces 4 All applications at a glance 5

Machining pipes and profi les 6 All applications at a glance 7

Machining pipes and profi les with GRIT 8All applications at a glance 9

Machining corners and edges 10All applications at a glance 11

From rough sanding to mirror polish – 12FEIN stainless steel sets

Products

Overview of FEIN machines and sets 14

Compact angle grinder WSG 14-70 E 16Sets and accessories 17

Compact angle grinder WSG 14-125 S 19

Sanding polisher WPO 14-25 E 21

Sets and accessories 22

Straight grinder MShy 648-1 Z + accessories 26 Straight grinder AHSI 636 c + accessories 27

Pipe sander RS 12-70 E 28Sets and accessories 29

GRIT belt grinders 32

GRIT GX 33GRIT GX 75 2H 34GRIT GX add-on modules 35GRIT GX accessories 36

GRIT GI 37GRIT GI 150 2H 38GRIT GI add-on modules 39GRIT GI accessories 40

CONTENTS

SYNTECH

4

SURFACES

Cleaning off dirt Rough material removal Removing welded seams

Fast and efficient cleaning and finishing for large surfac-es. The corrugated fleece adapts optimally to embossed surfaces.

Grind surfaces with sanding sleeves for excellent mate-rial removal.

With high torque but lower-speed grinding with ser-rated discs. This avoids high heat build-up on the mate-rial.

Effectively remove tarnishing with the corrugated fleece or fleece disc. For optimum adaptation to welded seams.

Professional-looking satin-finishing. For a smooth finish across the whole surface.

Precise sanding of minor scratches with finishing disc. For deeper scratches use Pyramix sanding discs with hook-and loop fastening.

Optimum preparation for polishing surfaces. The right sanding pattern with rotating procedures.

High-quality polishing results for surfaces, pipes and profiles. Larger tool diameters are available for larger immersion depths.

Top-class results right to the finish – machining surfaces with FEIN

Large or small, smooth or textured, glossy or matt – the machining solution you choose depends on what your surface looks like now and how you want it to look when you’ve fin-ished the job. FEIN is the first manufacturer to offer the necessary expertise, the tools, and the right accessories and specially matched stainless steel sets for surface machining.

Removing scratches Removing tarnishing Satin-finishing

Preparing for polishing Polishing to a mirror polish

SYNTECH

5

SURFACES

suitable very suitable

FEIN power tools and accessories for machining stainless steel surfaces

WSG 14-70 E

WSG 14-125 S

WPO 14-25 E

Mac

hin

es

Page

Ori

gin

al F

EIN

ac

cess

ori

es

Cle

anin

g o

ff d

irt

Ro

ugh

mat

eria

l re

mov

al

Rem

ovin

g w

eld

ed

seam

s

Rem

ovin

g sc

ratc

hes

Rem

ovin

g ta

rnis

hin

g

Sat

in-fi

nis

hin

g

Prep

arin

g fo

r p

oli

shin

g

Poli

shin

g to

a

mir

ror

po

lish

WSG 14-70 E 16 – 18 Stainless steel set – preparation for polishing surfaces / pipes / profi les

Serrated disc/roughing disc

Fleece sanding disc

WSG 14-125 S 19

WPO 14-25 E 20 – 25 Standard stainless steel set - Surfaces

Stainless steel set – Satin-fi nishing surfaces

Stainless steel set – Sanding surfaces

Stainless steel set – Polishing surfaces/pipes/profi les

Extra soft fl eece polishing ring, 150 / 200 mm

Fleece sanding disc

Corrugated fl eece Ø 150 / 200 mm

sET

sET

sET

sET

sET

SYNTECH

6

PIPES AND PROFILES

Clean pipes and profiles quickly and efficiently. The cor-rugated fleece adapts optimally to any given structure.

Cleaning off dirt

Removing tarnishing

Effective removal of scratches on bent pipes.

Removing scratches

Perfect mirror polish even on bent pipes with the pipe sander RS 12-70E

Removing welded seams

Remove welded seams without damaging adjacent sur-faces: with the special FEIN medium serrated disc.

The sanding polisher WPO 14-25 E: effectively remove tarnishing. Flexible corrugated fleece adapts optimally to the shape of the material.

Polishing to a mirror polish

For stainless steel profiles and flat material: satin-finish-ing with disc fleece wheels.

Satin-finishing

Polishing of profiles – with optimum preparation using Pyramix and the rotation process.

Preparing for polishing

Better machining all round for pipes and profiles? No problem with our stainless steel sets

The optimum machining of stainless steel pipes and profiles involves a wide range of different challenges. When used in hand rails, for example, they often serve as design elements as well as functional elements. In cases like these, optimum surface quality is of prime importance. FEIN power tools and stainless steel sets enable you to machine even hard-to-reach places without any need for dismantling – and in a fraction of the time.

SYNTECH

7 suitable very suitable

Mac

hin

es

Page

Ori

gin

al F

EIN

ac

cess

ori

es

Cle

anin

g o

ff d

irt

Rem

ovin

g sc

ratc

hes

Rem

ovin

g w

eld

ed

seam

s

Rem

ovin

g ta

rnis

hin

g

Sat

in-fi

nis

hin

g

Prep

arin

g fo

r p

oli

shin

g

Poli

shin

g to

a

mir

ror

po

lish

WSG 14-70 E 16 – 18 Stainless steel set - Sanding

pipes/profi les

Stainless steel set – Preparing to polish surfaces/pipes/profi les

WPO 14-25 E 21 – 25 Stainless steel set - Polishing

surfaces/pipes/profi les

Stainless steel set – Satin-fi nishing profi les

Standard stainless steel set – Pipes

Polishing ring (rigid cloth, soft cloth)

Fleece sanding disc

RS 12-70 E 28 – 30 Corrugated fl eece Ø 200mm

Basic set

FEIN power tools and accessories for machining stainless steel pipes and profi les

WSG 14-70 E

WPO 14-25 E

RS 12-70 E

sET

sET

sET

sET

sET

sET

sET

SYNTECH

8

PIPES AND PROFILES

Industrial machining of pipes and profiles? Better choose GRIT

Stationary GRIT belt grinders are powerful, robust and modular. With a combination of spe-cial grinding belts, they create individual grinding patterns. As another benefit, because pipes and profiles are often ground as part of automatic production processes, GRIT machines are also optimised for volume production.

Deburring Radius grinding Grinding mitre joints

GRIT deburring machines with stainless steel brushes for efficient deburring of manageably sized workpieces.

Precision grinding, grinding out and notching in seconds with GRIT radius grinding modules.

Preparing welded seams

Virtually vibration-free preparation of welded seams, maximum material removal and low tool costs: with the GRIT grinding belt quality “R”.

Removing scratches

Scratches are removed in an automated process.

Accurate grinding of mitre joints with mitre joint grind-ing plate and GIR.

GRIT gives profiles a perfect satin finish.

Satin-finishing

GRIT belt grinder GICS: creating a grinding pattern to prepare for polishing pipes.

Preparing for polishing

SYNTECH

9

GRIT stationary belt grinders and accessories for machining stainless steel pipes and profiles

GX 75 2H

GI 150 2H + GIBE

GX 75 2H + GXR

GI 150 2H + GIBE + GIL

GX 75 2H + GXC + GXW

GI 150 2H + GIBE + GIR

GXE

GICS GIE


Mac

hin

es

Page

Deb

urr

ing

Rad

ius

grin

din

g

Gri

nd

ing

mit

re

join

ts

Rem

ovin

g

scra

tch

es

Prep

arin

g w

eld

ed

seam

s

Sat

in-fi

nis

hin

g

Prep

arin

g fo

r p

oli

shin

g

GX 75 2H 34

GX 75 2H + GXR 33 – 35

GX 75 2H + GXC + GXW 33 – 35

GXE 33 – 35

GI 150 2H + GIBE 37 – 39

GI 150 2H + GIBE + GIL 37 – 39

GI 150 2H + GIBE + GIR 37 – 39

GICS 37 – 39

GIE 37 – 39

SYNTECH

10

CORNERS AND EDGES

Perfect machining of corners and edges – with tools and expertise from FEIN

Professional sanding and polishing of corners and edges is one of the most demanding tasks in the machining of stainless steel surfaces. This is because they are often difficult to access, which requires the machines and tools used to be extremely manageable and manoeuvrable.

GRIT deburring machines with stainless steel brushes for efficient deburring of manageably sized workpieces.

Deburring Preparing welded seams Removing welded seams

Removing tarnishing

GRIT high-performance grinding belts for maximum material removal.

FEIN medium serrated discs for removing fine welded seams without damaging adjacent surfaces.

Ideal for hard-to-reach spots: the handy straight grinder.

SYNTECH

11

Mac

hin

es

Page

Ori

gin

al F

EIN

ac

cess

ori

es

Deb

urr

ing

Prep

arin

g

wel

ded

sea

ms

Rem

ovin

g

wel

ded

sea

ms

Rem

ovin

g ta

rnis

hin

g

WSG 14-70 E 16

WSG 14-125 S 19

WPO 14-25 E 21 – 24 Sanding fleece with corrugation Ø 200mm

GX 75 2H 34

GXE 35 Stainless steel brush

GI 150 2H + GIBE 38

GIE 39 Stainless steel brush

MShy 648 1Z 26

ASHI 636 C 27

FEIN power tools, GRIT stationary belt grinders and accessories for machining corners and edges

WSG 14-70 E

WSG 14-125 S

WPO 14-25 E

GX 75 2H GI 150 2H + GIBEGXE GIE

MShy 648 1Z

ASHI 636 C


SYNTECH

12

FEIN STAINLESS STEEL SETS

From rough grinding to mirror polish – FEIN stainless steel setsFEIN supplies carefully chosen accessories for any desired surface quality in tried-and-tested FEIN stainless steel sets. The sets are specifi cally matched for the particular machine – the compact angle grinder WSG 14-70 or the sanding polisher WPO 14-25 E – and the applica-tion. Please refer to the following table to fi nd out which set is best for your application. All you need to know is the initial condition of the surface, the area of use or workpiece, and the desired result.

Surface with minor scratches

Surface with rough welded seam

Surface with fi ne welded seam

Pipes with scratches

Pipes / profi les with welded seams

1 Standard stainless steel set - Surfaces p 23

2 Stainless steel set – Sanding surfaces p 23

4 Stainless steel set – Preparing to polish surfaces / pipes / profi les p 17

6 Standard stainless steel set – Pipes p 23

7 Stainless steel set – Sanding pipes / profi les p 17

SYNTECH

4 7 1 2 3 6 8 5

13

FEIN STAINLESS STEEL SETS

FEIN compact angle grinder WSG 14-70 E

FEIN sanding polisher WPO 14-25 E

Stainless steel set – Preparing to polish surfaces / pipes / profiles

Stainless steel set – Sanding pipes / profiles

Standard stainless steel set – Surfaces


Stainless steel set – Satin-finishing surfaces


Stainless steel set – Satin-finishing profiles

Stainless steel set – Polishing surfaces / pipes / profiles

Surface with minor scratches

Surface with rough welded seam

Surface with fi ne welded seam

Pipes with scratches

Pipes / profi les with welded seams

1 Standard stainless steel set - Surfaces p 23

3 Stainless steel set – Satin-fi nishing surfaces p 23

4 Stainless steel set – Preparing to polish surfaces / pipes / profi les p 17 5 Stainless steel set – Polishing surfaces / pipes / profi les S. 24

6 Standard stainless steel set – Pipes p 23

7 Stainless steel set – Sanding pipes / profi les p 17 8 Stainless steel set – Satin-fi n. prof. p 24

SYNTECH

The FEIN stainless steel range – robust machines and sets

Surfaces, pipes and profiles, or corners and edges: FEIN offers a complete range of diverse, specialised products for machining stain-less steel! From individual machines like angle grinders, sanding polishers, pipe sanders and stationary belt grinders from GRIT by FEIN, which you can tailor to your applications with the right acces-sories, to specially matched sets for the most typical stainless steel applications.

Need to remove dirt, tarnishing, scratches or welded seams? Need to prepare a surface for polishing or polish it to a mirror polish? FEIN has the right solution for any stainless steel surface and any stainless steel application. Durable, robust tools and accessories that allow you to work faster, more conveniently and more efficiently than ever before.

SYNTECH

15

Overview of FEIN machines and sets

Stainless steel set - Sanding pipes / profiles

Stainless steel set - Preparing to polish surfaces / pipes / profiles

Stainless steel set – Satin-finishing profiles

Standard stainless steel set – Surfaces

Stainless steel set – Polishing surfaces / pipes / profiles

Radius grinding module GXR Rotary grinding module GXC Cooling lubricant module GXW Deburring machine GXE

Radius grinding module GIR Centreless grinder GICS Surface grinding module GIL Deburring machine GIE



Stainless steel set – Satin-finishing surfaces

PRODUCT OVERVIEW

Compact angle grinder 14-70 E Page 16

Compact angle grinder wsG 14-125 s Page 19

sander / Polisher wPO 14-25 Page 21

straight grinder Mshy 648-1 Z Page 26

straight grinder AhsI 636 c Page 27

Pipe sander Rs 12-70 E Page 28

Belt grinder GRIT Gx 75 2h Page 34

Belt grinder GRIT GI 150 2h Page 38

SYNTECH

16

WSG 14-70 E

Compact angle grinder wsG 14-70 E – ideal for material removal

As a powerful compact angle grinder with variable speed for machining stainless steel, the WSG 14-70 E offers an optimised speed range for stainless steel surfaces and high cutting perform-ance, particularly for precise material removal. The speed is infi-

nitely variable and the tool’s HIGH POWER MOTOR supplies it with very high torque. Robust and flexible, this is the ideal machine for the surface machining of stainless steel.

Particularly ergonomic shape so you can work comfortably and without fatigue.

Infinitely variable speed. The selected speed remains constant in all load situations.

Effective material removal over the full working range and load of up to 150 %.Impressive lifetime and very

long service lives thanks to the special self-supporting motor design, metal drive head and dustproof ball bearing. Best vibration values for up to

8 hours even without the anti-vibration handle.

Ergonomic shape

Variable speed

HIGH-POWER-MOTOR

Long service lives

Minimal vibrations

Technical dataModel WSG 14-70 EPower / consumption watts 1200Power / output watts 750Idling speed rpm 2500 – 7000Cable with plug m 4Weight kg 2,2Tool holderFlanges M 14Sanding disc Ø mm 125Elastic backing pad Ø mm 125Order number 7 221 43

Included in price

1 safety hood, 1 pair of flanges, 1 extra handle, 1 key

Benefits:

Variable speed allows various tools to be used and preserves surfaces.

Reliable, countersunk switch

H 07 industrial cable

Dustproof tacho control

Sealed electronic parts

Soft start

Restart lock

Carbon brushes with self-cutoff function

SYNTECH

17

7 4

WSG 14-70 E – SETS AND ACCESSORIES

Other accessories

Stainless steel sets

Tool casePlastic, 450 x 310 x 135 mm

Order number 3 39 01 118 01 0

Plastic boxCase insert with lockable lid for small parts and accessories, suitable for tool case 3 39 01 181 01 0, max. 5 per case

Order number 3 39 01 119 00 0

Anti-vibration handleM8, vibration-absorbing, to reduce vibra-tions during longer jobs

Order number 3 21 19 119 01 7

Stainless steel set – Sanding pipes / profiles Sand fine welded seams without damaging adjacent surfaces. With subsequent surface finish.

IAlso included:10x medium serrated sanding discs (6 37 30 018 01 0)1 flap wheel, grain 120 (6 37 21 052 01 0)1 finishing disc (6 37 32 005 01 0)

Set requiresAngle grinder FEIN WSG 14-70 E

Order number 6 37 21 052 02 0

Stainless steel set – Preparing to polish surfaces / pipes / profilesQuickly and effectively removes scratches; optimum preparation for polishing with matched sanding pattern; when preparing for polishing, effective material removal in little time.Also included:1 cooling backing pad assy. (6 38 06 193 01 0)50 sanding discs, grain 80 (6 37 28 096 01 9)5 Pyramix sanding discs, grain 280 (6 37 17 223 01 0)5 Pyramix sanding discs, grain 400 (6 37 17 224 01 0)5 Pyramix sanding discs, grain 600 (6 37 17 225 01 0)5 Pyramix sanding discs, grain 1200 (6 37 17 226 01 0)

Set requiresAngle grinder FEIN WSG 14-70 E

Order number 6 38 06 193 02 0

Elastic backing pad with M14 flange, for fibre sanding discs Ø 125mm

Order number 6 38 06 087 01 3

Support platewith hook and loop section, for use withsanding discs with hook and loop fasten-ing, M14

Order number 6 38 06 168 01 2

INOX round twist brush Ø 115 mm, M14

Order number 6 37 22 049 01 8

Inner flange

Order number 6 38 01 120 00 6

Threaded flange M14for roughing discs, cutting wheels, ser-rated sanding discs and round twist brushes

Order number 6 38 02 052 00 0

Threaded flange M14for elastic backing pads and tapered twist brushes

Order number 6 38 01 154 00 7

Support platewith hook and loop section, for use with sanding fleece, M14

Order number 6 38 06 172 01 0

Universal dust extraction deviceØ 125 mm, for serrated sanding discs, elastic backing pads, support plates and tapered twist brushes

Order number 9 26 02 067 01 6

Strip brushfor universal dust extraction device

Order number 3 32 18 101 01 4

Fleece sanding discsØ 115 mm, stable, with hook and loop fastening, for use with support plate 6 38 06 172 01 0

Grain No. in pack Order numbercoarse 10 6 37 32 001 01 8 medium 10 6 37 32 002 01 1 fine 10 6 37 32 003 01 5

SYNTECH

18

Flap wheel, grain 120, pack of 1

Order number 6 37 21 052 01 0

Finishing disc, pack of 1Ø 125 mm, for final finish

Order number 6 37 32 005 01 0

Other accessories

Cooling backing pad Ø 115 mm, rear-ventilated backing pad, ideal for Pyramix sanding discs

Order number 6 38 06 193 01 0

Sanding disc grain 80, pack of 50Ø 115 mm, for removing very deep scratches and fine welded seams

Order number 6 37 28 096 01 9

Pyramix sanding discØ 115 mm

for removing deep scratchesGrain No. in pack Order number280 5 6 37 17 223 01 0

for removing minor scratches, creating sanding pattern, reducing roughness depth Grain No. in pack Order number400 5 6 37 17 224 01 0

for removing very minor scratches, creat-ing sanding pattern, reducing roughness depth Grain No. in pack Order number800 5 6 37 17 225 01 0

Reducing roughness depth, optimum preconditions for subsequent polishingGrain No. in pack Order number1400 5 6 37 17 226 01 0

Serrated sanding disc medium, pack of 10Ø 125 mm, for removing fine welded seams without damaging adjacent surfaces

Order number 6 37 30 018 01 0

WSG 14-70 E – AND ACCESSORIES

SYNTECH

19

Compact angle grinder wsG 14-125 s – mechanically reduced speed for maximum performance

As a powerful compact angle grinder with reduced speed yet high torque and speed stability, the WSG 14-125 S is ideal for machining stainless steel with serrated discs.


Impressive lifetime and very long service lives thanks to the special self-supporting motor design, metal drive head and dustproof ball bearing.

Ergonomic shape

Long service livesBest vibration values for up to 8 hours even without the anti-vibration handle.

Minimal vibrations

Effective material removal over the full working range and load of up to 150 %.

HIGH-POWER-MOTOR

Technical dataModel WSG 14-125 SPower / consumption watts 1200Power / output watts 750Cable with plug rpm 7000Cable with plug m 4Weight kg 2,2Tool holderFlanges M 14Sanding disc Ø mm 125Elastic backing pad Ø mm 125Order number 7 221 44

Benefi ts:

Unique ergonomic design for fatigue-free working. Equally suited to right- and left-handers.

Reliable, countersunk switch


Dustproof tacho control

Captive safety hood with protection against twisting

Sealed electronic parts

Soft start

Restart lock

Carbon brushes with self-cutoff functionIncluded in price

1 safety hood, 1 pair of flanges, 1 extra handle, 1 key

WSG 14-125 S

SYNTECH

20

Accessories

Tool casePlastic, 450 × 310 × 135 mm

Order number 3 39 01 118 01 0


Order number 3 39 01 119 00 0

Anti-vibration handleM8, vibration-absorbing, to reduce vibra-tions during longer jobs

Order number 3 21 19 119 01 7

Elastic backing padwith M14 flange, for fibre sanding discs Ø 125 mm

Order number 6 38 06 087 01 3


Order number 6 37 22 049 01 8

Inner flange

Order number 6 38 01 120 00 6

Threaded flange M14for roughing discs, cutting wheels, ser-rated sanding discs and round twist brushes

Order number 6 38 02 052 00 0

Threaded flange M14for elastic backing pads and tapered twist brushes.

Order number 6 38 01 154 00 7

Universal dust extraction deviceØ 125 mm, for serrated sanding discs, elastic backing pads, support plates and tapered twist brushes.

Order number 9 26 02 067 01 6

Strip brushfor universal dust extraction device.

Order number 3 32 18 101 01 4

WSG 14-125 S – ACCESSORIES

SYNTECH

21

Technical dataModel WPO 14-25 EPower / consumption watts 1200Power / output watts 750Idling speed rpm 900 – 2500Cable with plug m 4Weight kg 2,4Tool holderFlange M 14Polishing tool Ø mm 250Order number 7 221 49

Included in price

1 extra handle, 1 Allen key

Benefi ts:

Extremely powerful even at low speeds thanks to mechanical gear reduction and FEIN HIGH POWER MOTOR.

Infinitely variable speed, ideal for sanding, satin-finishing, brush-ing and high-gloss polishing of stainless steel.

Universal suitability as fully-functional sander, polisher and satin-finisher.

Outstanding ergonomics

Spindle lock

Right- or left-handed operation

Restart lock

Soft start


Dustproof ball bearing


Wide range of accessories available

sanding polisher wPO 14-25 E – power and fl exibility in one

The WPO 14-25 E combines several machines in one: a fully-func-tional sander, polisher and satin-fi nisher. Thanks to mechanical gear reduction and the FEIN HIGH POWER MOTOR, this machine is

Variable speed

Double gear reduc

extremely powerful even at low speeds. The variable speed adjust-ment makes it ideal for machining stainless steel surfaces.

Ergonomic shape



Infi nitely variable speed. The selected speed remains con-stant in all load situations.

Maintains constant speeds even under very high load.

Impressive lifetime and very long service lives thanks to the special self-supporting motor design, metal drive head and dustproof ball bearing.

Long service livHIGH-POWER-MOTOR

WPO 14-25 E

SYNTECH

22

Technical dataModel WPO 14-25 EPower / consumption watts 1200Power / output watts 750Idling speed rpm 900 – 2500Cable with plug m 4Weight kg 2,4Tool holderFlanges M 14Polishing tool Ø mm 250Order number 7 221 49 50

1 × lamella fleece cylinder grain 180

2 × key

1 × FEIN WPO 14-25 E

1 × plastic case

1 × work arbour

1 × elastic sanding cylinder grain 60

1 × corrugated sanding fleece

10 × sanding fleece with fine hooks and support plate

Holder

Included in price

1 FEIN WPO 14-25 E, 1 plastic case, 1 holder, 1 safety hoop, 1 work arbour, 1 standard stainless steel set for surfaces (1 corrugated sanding fleece, 1 support plate with hook and loop fastening, 10 sanding fleeces with fine hooks, 1 elastic sanding cylinder grain 60, 1 lamella fleece cylinder grain 180, 1 work arbour, 2 keys

Benefits:

Infinitely variable speed, ideal for sanding, satin-finishing, brush-ing and high-gloss polishing of stainless steel

Universal suitability as fully-functional sander, polisher and satin-finisher

Spindle lock

Right- or left-handed operation

Restart lock

Soft start




Wide range of accessories available

stainless steel starter set – for standard applications in surface machining

The stainless steel starter set covers all standard applications in surface machining: removing tarnishing, dirt and minor scratches and achieving a high-quality satin finish.

WPO 14-25 E – STAINLESS STEEL START SET

SYNTECH

23

1

3

2

6

Standard stainless steel set – SurfacesSet for standard applications in surface machining: cleaning off dirt with corrugated fleece, removing tarnishing and achieving a high-quality satin finish.

Also included:1 elastic sanding cylinder, grain 60 (6 37 21 006 01 2)1 lamella fleece cylinder (6 37 21 009 01 8)1 corrugated sanding fleece (6 37 23 021 01 3)1 fine fleece sanding disc, pack of 10 (6 37 32 003 01 5)1 support plate (6 38 06 172 01 0)1 work arbour (6 38 03 066 02 4)1 pin-type face spanner (6 29 10 022 00 2)1 open-ended spanner 19 x 22 (6 29 04 003 00 0)

Set requiresSanding polisher WPO 14-25 EHolder (6 37 33 006 01 0)Work arbour (6 38 03 067 02 8)Safety hoop (3 02 29 216 00 5)

Order number 6 37 21 006 04 0


Stainless steel set – Satin-finishing surfacesPerfect, smooth satin finish. Very low build-up of heat during machining.

Also included:1 elastic sanding cylinder, grain 60 medium (6 37 21 006 01 2)1 elastic sanding cylinder, grain 180 fine (6 37 21 007 01 6)1 sine fleece sanding cylinder, grain 180 fine (6 37 21 051 01 0)

Set requiresSanding polisher WPO 14-25 EHolder (6 37 33 006 01 0)Safety hoop (3 02 29 216 00 5)Work arbour (6 38 03 067 02 8)

Order number 6 37 21 050 02 0

Stainless steel set – Sanding surfacesEffective material removal for surfaces.

Also included:1 expansion cylinder (6 38 06 192 01 0)5 sanding sleeves, grain 60 (6 37 14 132 01 0)5 sanding sleeves, grain 80 (6 37 14 133 01 0)5 sanding sleeves, grain 120 (6 37 14 134 01 0)


Order number 6 38 06 192 02 0

Standard stainless steel set – PipesSet for standard applications in the machining of straight pipes. Cleaning off dirt, removing tarnishing and achieving a high-quality satin finish.

Also included:1 sanding belt roller (6 38 06 181 01 6)1 sanding belt, grain 60, pack of 10 (6 37 14 044 01 0)1 sanding belt, grain 120, pack of 10 (6 37 14 045 01 4)1 medium fleece belt (6 37 14 048 01 9)1 fine fleece belt (6 37 14 049 01 3)1 adhesive strip (6 38 09 004 01 9)


Order number 6 38 06 181 03 0

WPO 14-25 E – SETS AND ACCESSORIES

SYNTECH

24

8 5

WPO 14-25 E – SETS AND ACCESSORIES

Sanding belt roller 100 × 70 mm

Order number 6 38 06 181 01 6

Sanding belts600 × 30 mm

Korn No. in pack Order number 60 10 6 37 14 044 01 0 120 10 6 37 14 045 01 4 240 10 6 37 14 046 01 7

Adhesive strip for re-fastening sanding belts in closed pipe systems, 50 m

Order number 6 38 09 004 01 9

Fleece sanding discsØ 115 mm, stable, with hook and loop fastening, for use with support plate 6 38 06 172 01 0

Grain No. in pack Order numbercoarse 10 6 37 32 001 01 8 medium 10 6 37 32 002 01 1 fine 10 6 37 32 003 01 5

Support plateØ 115 mm, with hook and loop section, for use with sanding fleece, M14

Order number 6 38 06 172 01 0


Order number 6 37 22 049 01 8

Lamella fleece cylinderØ 100 × 100 mm

for medium satin finishGrain Version Order number100 medium 6 37 21 008 01 4

for fine satin finishGrain Version Order number180 fine 6 37 21 009 01 8

for very fine satin finishGrain Version Order number280 very fine 6 37 21 010 01 0

Corrugated sanding fleeceWidth approx. 30 mm, bore 14 mm, for light-duty deburring, deoxidation, light-duty sanding, decorative work

Ø mm Order number 150 6 37 23 021 01 3 200 6 37 23 022 01 6

Elastic sanding cylinderØ 100×100 mm

Grain Version Order number60 medium 6 37 21 006 01 2 180 fine 6 37 21 007 01 6

Sine fleece sanding cylinderØ 100 _ 100 mm, with sine wave, for smooth satin finish

Grain Version Order number180 fine 6 37 21 051 01 0

Flap wheelØ 150 mm

for remedying minor mistakes and scratchesOrder number 6 37 21 003 01 7 for medium brush strokesOrder number 6 37 21 004 01 5 for fine brush strokes, satin finish Order number 6 37 21 005 01 9

Other accessories


Stainless steel set – Satin-finishing profilesSatin-finishing of profiles for a perfect sanding pattern.

Also included:1 flap wheel (6 37 21 003 01 7)1 flap wheel (6 37 21 004 01 5)1 flap wheel (6 37 21 005 01 9)1 work arbour (6 38 03 066 02 4)1 pin-type face spanner (6 29 10 022 00 2)1 open-ended spanner 19x22 (6 29 04 003 00 0)

Set requiresSanding polisher WPO 14-25 EHolder (6 37 33 006 01 0)Safety hoop (3 02 29 216 00 5)

Order number 6 37 21 003 04 0

Stainless steel set – Polishing surfaces / pipes / profilesGives surfaces a mirror polish. No lint build-up on the polishing rings.

Also included:1 sisal polishing ring (6 37 23 011 01 4)2 rigid polishing ring cloth (6 37 23 013 01 1)2 soft polishing ring cloth (6 37 23 014 01 9)1 brush paste (6 37 26 001 01 8)1 pre-polishing paste (6 37 26 002 01 1)1 colouring paste (6 37 26 003 01 5)1 work arbour (6 38 03 027 03 8)1 pin-type face spanner (6 29 10 022 00 2)1 open-ended spanner 19x22 (6 29 04 003 00 0)

Set requiresSanding polisher WPO 14-25 EHolder (6 37 33 006 01 0)Safety hoop (3 02 29 216 00 5)

Order number 6 37 23 011 04 0

SYNTECH

25

WPO 14-25 E – AND ACCESSORIES

Anti-vibration handleM8, vibration-absorbing, to reduce vibrations during longer jobsr

Order number 3 21 19 119 01 7

Sanding belt, grain 120, pack of 10For removing minor scratches, intermediate sanding

Order number 6 37 14 045 01 4

Sanding belt, grain 60, pack of 10For removing deep scratches

Order number 6 37 14 044 01 0

Expansion cylinderØ 100 × 100 mm, for vibration-free, secure holding of sanding sleeves

Order number 6 38 06 192 01 0

Sanding sleeve

For removing small welded seams and very deep scratches and mill scaleGrain No. in pack Order number60 5 6 37 14 132 01 0

For removing deep scratches Grain No. in pack Order number80 5 6 37 14 133 01 0

For removing scratches, stage prior to satin-finishingGrain No. in pack Order number120 5 6 37 14 134 01 0

Fleece belts with button closure for re-fastening, ideal for closed pipe systems, 600 × 30 mm

Version Order number coarse 6 37 14 047 01 1 medium 6 37 14 048 01 9 fine 6 37 14 049 01 3

Polishing rings, sisal for fine sanding / brushing and smoothing

stainless steel after pre-sanding with grain 280 – 400

With “yellow” brush paste Matt sheen polishing of stainless steel

with “yellow” brush paste Width approx. 30 mm, bore 14 mm

Ø mm Order number 150 6 37 23 011 01 4 200 6 37 23 012 01 7

Polishing rings, cloth, rigid Width approx. 15 mm, bore 14 mm For pre-polishing and polishing stain-

less steel with “orange” pre-polishing paste

Ø mm Order number 150 6 37 23 013 01 1 200 6 37 23 015 01 3

Polishing rings, cloth, soft Width approx. 15 mm, bore 14 mm For high gloss polishing of stainless

steel and chrome with “white” colour-ing paste

Ø mm Order number 150 6 37 23 014 01 9 200 6 37 23 016 01 6

Polishing rings, fleeceextra soft Width approx. 15 mm, bore 14 mm For finish polishing of stainless steel

with colouring paste

Ø mm Order number 150 6 37 23 019 01 2 200 6 37 23 020 01 4

Other accessories

Polishing wheel Ø 150 mm, width 60 mm, elastic For brush polishing, grain 16 (coarse),

soft “green”

Order number 6 37 13 013 01 8

For fine surfaces, grain 24 (medium), soft “blue”

Order number 6 37 13 015 01 0

For fine polishing, grain 46 (fine), soft, “brown"

Order number 6 37 13 016 01 3

Requires: Work arbour Order number 6 38 03 066 02 4

Flap wheelWidth 50 mm, for polishing rust-resistant steel

Ø mm Order number 200 6 37 21 001 00 1

Microfibre clothFine weave quality for cleaning polishing residue. Hem-free version means no scratches and no lint

Order number 6 37 33 003 01 0

Vienna chalkStainless steel cleaning powder to remove polishing paste and fingerprints, 1 kg

Order number 6 37 26 007 01 4

Brush paste“Yellow”, for sisal / cloth for giving matt sheen to non-ferrous metals, iron / steel and stainless steel

Order number 6 37 26 001 01 8

Pre-polishing paste”Orange”, for rigid cloth, for pre-pol-ishing and polishing non-ferrous metals, iron / steel and stainless steel

Order number 6 37 26 002 01 1

Colouring paste“White”, for soft cloth, for giving high gloss polish to non-ferrous metals, iron /steel, stainless steel and chrome

Order number 6 37 26 003 01 5

HolderFor side handle, can be swivelled through 360°

Order number 6 37 33 006 01 0

Work arbourFor satin-finishing tools (cylinders and rollers), length 100 mm, tool holder Ø 19 mm

Order number 6 38 03 067 02 8

With wheel flange M 14, for polishing rings, holding range 15 – 35 mm

Order number 6 38 03 027 03 8

With wheel flange M 14, for lamella sanding discs, buffing and polishing discs, holding range 15 – 50 mm

Order number 6 38 03 066 02 4

Safety hoopAs hand guard

Order number 3 02 29 216 00 5

SYNTECH

26

straight grinder Mshy 648-1 Z – unbeatable speed stability

The MShy 648-1 Z is a manoeuvrable and powerful straight grinder that’s ideal for use in places with difficult accessibility. Its narrow neck is perfect for hard-to-reach places. It offers good speed stability and is perfectly designed for machining stainless steel, for example satin-

MSHY 648-1 Z

finishing and polishing corners and edges. The spindle with multiple bearings makes for quiet operation and therefore accurate working.

Multiple-bearing spindle ensures quiet operation and therefore precise working.

Narrow, non-slip neck and handle for a secure grip

Metal gearbox housing.

Speed optimised for machining stainless steel. For satin- finishing and polishing corners and edges.

High precision

Ergonomic shape

Long service life

Stable speed

Technical dataModel MShy 648-1 ZPower / consumption watts 650Power / output watts 420Idling speed rpm 5200Cable with plug m 4Weight kg 3.1Tool holder Collet Ø mm 8Sanding wheel max. Ø mm 50Order number 7 223 13

Benefits:

Collet for shank up to Ø 8 mm

Small width across corners thanks to offset shape

Tool case Metal 700 × 180 × 100 mm

Order number 3 39 01 021 01 1

Collets Insertion depth 30 mm

Ø mm Order number3 6 32 07 087 00 1 6 6 32 07 059 00 6 8 6 32 07 069 00 5 ¼ 6 32 07 088 00 9

Accessories

Work arbour

for sanding discs

Order number 6 38 03 058 01 1

Included in price

1 set of keys

SYNTECH

27

AHSI 636 C

straight grinder AhsI 636 c – a little gem from FEIN

Small but highly versatile: with its extremely compact design the AHSI 636 c is the ideal straight grinder for all corners and edges, for example on hand rails.

When you have to work in narrow spaces the small width across the corners is simply unbeatable. It’s handy, robust and offers good speed stability. The drill chuck allows you to clamp any kind of tool.

Tool holder with key-type drill chuck up to Ø 10 mm for using a wide range of tools with shank.

Metal gearbox housing

Small, compact design prevents fatigue.

Specially designed for brushing and polishing tools: uncompro-mising speed stability.

Stable speed

Ergonomic shapeDrill chuck for flexibility

Long service life

Technical dataModel AHSI 636 cPower / consumption watts 280Power / output watts 150Idling speed rpm 4500Cable with plug m 3Weight kg 1.5Tool holderSanding wheel max. Ø 50Order number 7 223 02

Tool casePlastic, 450 × 310 × 135 mm

Order number 3 39 01 118 01 0


Order number 3 39 01 119 00 0

Accessories

Work arbourfor sanding discs

Order number 6 38 03 058 01 1

Benefits:

Drill chuck with protective cover

Drill in steel up to Ø 4 mm

Small width across corners thanks to offset shape

Included in price

1 set of keys

SYNTECH

28

Pipe sander Rs 12-70 E – the easy way to handle tight curves

The RS 12-70 E can be easily manoeuvred around tight curves and enables you to rework ready-fitted hand rails. With infinitely variable speed it’s ideal for sanding, satin-finishing and high-gloss

360° peripheral sanding in just 2 steps.

Metal gearbox, metal sanding arms and dustproof ball bearing.


Effective sanding of welded seams thanks to optimum cut-ting speeds.

Infinitely variable speed for sanding, satin-finishing and high-gloss polishing of ready-fitted hand rails.

Rapid progress of work

Long service life

HIGH-POWER-MOTOR

High torque

polishing. And thanks to flexible sanding belts it adapts optimally to even the tightest pipe bends.

Benefits:

Optional guide pulleys for narrow distances from the wall

Restart lock


Wide range of accessories

Technical dataModel RS 12-70 EPower / consumption watts 1200Power / output watts 750Idling speed rpm 2700 – 7000Cutting speed m/sec 22Minimum distance from wall mm 50Weight kg 3,8Cable with plug m 4Pipes up to Ø mm 8 – 80Order number 7 221 13 50

RS 12-70 E

SYNTECH

29

PIPE SANDER START SET

stainless steel starter set – for standard applications in pipe machining

The starter set covers all standard applications for pipes and pipe bends: cleaning, removing mill scale and scratches, creating sanding pattern and achieving a high-quality satin finish.

2 × 10 sanding belts 20 x 815 mm P120 / P180

1 metal tool case

5 fleece belts 20 x 820 mm, very fine

2 × 10 sanding belts 40 x 815 mm P120 / P180

Pipe sander RS 12-70 E

Benefits:

Effective sanding of welded seams thanks to optimum cutting speeds of the sanding belts.

Infinitely variable speed for sanding, satin-finishing and high-gloss polishing of ready-fitted hand rails.

Flexible sanding belts optimally adapt to even tight pipe bends, creating surfaces without awkward transitions.

360° peripheral sanding in just 2 steps

Optional guide pulleys for narrow distances from the wall

Self-start lock

Restart lock

Wide range of accessories



Technical dataModel RS 12-70 EPower / consumption watts 1200Power / output watts 750Idling speed rpm 2700 – 7000Sanding speed m/sec 22Minimum distance from wall mm 50Weight kg 3.8Cable with plug m 4Pipes up to Ø mm 8 – 80Order number 7 221 13 51

Included in price

2 × 10 sanding belts 20 x 815 mm P120 / P180 2 × 10 sanding belts 40 × 815 mm P120 / P180 5 fleece belts 20 × 820 mm, very fine1 metal tool case

SYNTECH

30

RS 12-70 E – SETS AND ACCESSORIES

Pipe sander sets

Basic pipe sander setCleaning off dirt, removing scratches and achieving a perfect satin finish

Also included:2 x 10 sanding belts, 20 x 815 mm, P 120 / P1802 x 10 sanding belts, 40 x 815 mm, P 120 / P1805 fleece belts, 20 x 820 mm, very fine 280

Order number 6 37 14 050 02 1

Pipe sander polishing setFrom preparing to polish to achieving a perfect mirror polish

Also included:2 x 10 sanding belts, 20 x 815 mm, P 320 / P4001 x 3 polishing belts, 20 x 815 mm1 tube pre-polishing cream, red (200 ml)1 tube colouring paste, white (200 ml)

Order number 6 37 14 052 02 3

Ceramic sanding belts Maximum material removal and very long service life. Also suitable for remo-ving fine welded seams

Dimensions No. in pack Order nr.20 × 815 mm 10 6 37 14 130 01 0 40 × 815 mm 10 6 37 14 131 01 0

Sanding belts Highly flexible sanding belts, ideal for sanding pipe bends

20 × 815 mmDimensions No. in pack Order nr.120 10 6 37 14 050 01 5 180 10 6 37 14 051 01 4 320 10 6 37 14 052 01 7 400 10 6 37 14 053 01 1

40 × 815 mmDimensions No. in pack Order nr.120 10 6 37 14 054 01 9 180 10 6 37 14 055 01 3

Polishing belts, pack of 320 x 815 mm, very soft version, for smooth mirror polish even with tight pipe bends

20 × 815 mmGrain No. in pack Order number80 5 6 37 14 056 01 6 120 5 6 37 14 057 01 0 280 5 6 37 14 058 01 8

Polishing belts, pack of 320 × 815 mm, very soft version, for smooth mirror polish even with tight pipe bends

Order number 6 37 26 010 01 8

Accessories

Pre-polishing cream, red For pre-polishing in conjunction with polishing belts

Order number 6 37 26 008 01 2

Colouring paste, white For colouring and high-gloss polishing in conjunction with polishing belts

Order number 6 37 26 009 01 6

Guide pulleyFor narrow spaces (distance from wall 50 mm)

Order number 3 13 35 017 01 1

Vienna chalk

Order number 6 37 26 007 01 4

Microfibre cloth

Order number 6 37 33 003 01 0

SYNTECH

SYNTECH

GRIT belt grinders – one system, a wealth of possibilities

Developing solutions to metal machining problems is one of FEIN’s core competencies. GRIT has been setting the standard in belt grind-ers for 25 years. In acquiring the GRIT brand, we are continuing to expand our expertise in this area. And you benefit from the com-bined know-how of two leading brand-name manufacturers. GRIT by FEIN stands for belt grinders that are optimally adapted to your application. There are two GRIT systems to satisfy all requirements:

GRIT GX for use in the workshop and the exceptionally powerful and heavy-duty GRIT GI system for industrial use. Both GRIT sys-tems are based on the unique, modular ‘building block’ concept. You benefit from powerful basic belt grinders and add-on modules for specific applications, covering every imaginable task in manual trades and industry.

SYNTECH

33

GRIT GX

Gx – for use in the workshop

Designed for use in manual trades or small-scale volume produc-tion, the GRIT GX range offers outstanding efficiency. From rough grind to final finish, with GRIT GX machines you can work quickly

and with high quality. They can be easily retooled between different applications and they are safe to use and built to last.

Belt grinder GX 75 2H + GXC + GXW

Deburring machine GXE + GIXS / GIXBE

Radius grinder GX 75 2H + GXR

Deburring machine

Radius grinder Radius grinding moduleBelt grinder (base unit)

Cooling lubricant module

Rotary grind-ing module

Centreless rotary grinder Belt grinder (base unit)

GXE 7 901 05GIXS 9 90 01 002 00 0GIXBE 9 90 01 009 00 0

GXR 9 90 01 001 00 0GX 75 2H 7 901 02

GX 75 2H 7 901 02GXW 7 901 04

GXC 7 901 03

Machine base without dust extraction

Machine base with dust extraction

SYNTECH

34

GRIT GX 75 2H

Belt grinder GRIT Gx 75 2h

The powerful belt grinder in the two-speed version is the basis of the modular GX range and can also be used on its own as a fully functional belt grinder.

Robust 3-phase motor

For grinding at a constant speed.

Speed level

Optimum speeds for machin-ing stainless steel; GX 75 2H can be switched to 1500 rpm or 3000 rpm.

Machine base

High working safety.

Height-adjustable sup-port for surface grinding

Self-regulating belt tension

Comfortable operation

Tool-free

Easy belt adjustment

Technical dataModel GX 75 2HPower / consumption kW 1.5 / 2Idling speed rpm 1500 / 3000Belt dimensions mm 75 × 2000Weight kg 75Order number 7 901 02

Benefits:

Effective material removal in short time thanks to high motor output

Very low-vibration in use

Accurate working thanks to patented belt tensioning system

Extremely efficient: coarse sanding, finishing welded seams, chamfering, deburring and surface grinding

Adjustable working height.

Removable swarf container.

SYNTECH

35

GRIT GX ADD-ON MODULES

Radius grinding module GXRGrinding exact radii on pipes is all a question of choosing the right machine. In a few simple steps, the addition of the GXR module transforms the GX 75 2H base unit belt grinder into a professional radius grinder equipped as standard with depth stop, cross slide and quick tensioning system. This makes precise grinding not only straightforward but also much more comfortable..

Technical data Model GXR

Pipes up to Ø mm 16 – 75

Dimensions of profiles / flat material max. mm 75 × 75

Belt dimensions mm 75 × 2250

Weight kg 54

Order number 9 90 01 001 00 0

Rotary grinding module GXCThe GXC rotary grinding module also offers excellent efficiency and flexibil-ity when it comes to grinding the out-side of pipes in automated production lines. It allows you to achieve perfect surfaces with minimal effort. In a few simple steps it can be converted into a centreless rotary grinder.

Technical dataModel GXC

Power / consumption kW 0.18



Weight kg 48

Order number 7 901 03

Cooling lubricant module GXWIn combination with the GXC, signifi-cantly reduces heat build-up while bind-ing swarf.

Technical data Model GXW


Weight kg 8.6


Deburring machine GXEAn outstanding addition to the GRIT GX range: the deburring machine GXE takes care of the last step in the proc-ess. It’s extremely effective at deburr-ing pipes, profiles and flat materials. The wide range of GRIT deburring brushes can tackle almost any deburr-ing job.

Technical dataModel GXE


Idling speed rpm 1500

Tool dimensions max. Ø x width mm 250 × 60

Weight kg 32


Machine bases GIXS / GIXBEBoth machine bases, either with or without dust extraction, are ideal for the deburring machine GXE. Quick to fit, built to last and extremely stable. Machine bases can also be used for the GI range (GI 100 and GIE).

Technical data Model GIXS

Dimensions mm 304×356×769

Weight kg 18

Order number 9 90 01 002 00 0

Technical data Model GIXBE

Power W 370

Max. vacuum mbar 2.65


Weight kg 58

Order number 9 90 01 009 00 0

Add-on modules

Machine base with-out dust extraction


SYNTECH

36

Stainless steel clamping jaw Interchangeable, for vice when machin-ing stainless steel, pack of 1

Order number 6 99 02 004 00 0

Length stop Length 1000 mm, infinitely variable, easy to fit

Order number 6 99 02 001 00 0

Contact rollers Easy to fit, ball bearings on both sides

Ø mm Order number17.0 6 99 02 021 00 017.2 6 99 02 022 00 018.0 6 99 02 023 00 019.0 6 99 02 024 00 020.0 6 99 02 025 00 021.0 6 99 02 026 00 021.3 6 99 02 027 00 022.0 6 99 02 028 00 022.2 6 99 02 029 00 022.5 6 99 02 030 00 023.0 6 99 02 031 00 023.1 6 99 02 032 00 024.0 6 99 02 033 00 028.6 6 99 02 043 00 028.8 6 99 02 044 00 029.0 6 99 02 045 00 030.0 6 99 02 046 00 031.7 6 99 02 047 00 032.0 6 99 02 048 00 033.0 6 99 02 049 00 033.7 6 99 02 050 00 034.0 6 99 02 051 00 035.0 6 99 02 052 00 024.5 6 99 02 034 00 025.0 6 99 02 035 00 025.4 6 99 02 036 00 025.9 6 99 02 037 00 026.0 6 99 02 038 00 026.4 6 99 02 039 00 026.9 6 99 02 040 00 027.0 6 99 02 041 00 028.0 6 99 02 042 00 0

36.0 6 99 02 053 00 037.5 6 99 02 054 00 038.0 6 99 02 055 00 038.1 6 99 02 056 00 038.3 6 99 02 057 00 040.0 6 99 02 058 00 041.0 6 99 02 059 00 041.2 6 99 02 060 00 042.0 6 99 02 061 00 042.4 6 99 02 062 00 042.6 6 99 02 063 00 043.0 6 99 02 064 00 043.3 6 99 02 065 00 044.0 6 99 02 066 00 044.5 6 99 02 067 00 045.0 6 99 02 068 00 046.0 6 99 02 069 00 048.0 6 99 02 070 00 048.3 6 99 02 071 00 049.0 6 99 02 072 00 050.0 6 99 02 073 00 050.8 6 99 02 074 00 051.0 6 99 02 075 00 053.0 6 99 02 076 00 053.7 6 99 02 077 00 054.0 6 99 02 078 00 055.0 6 99 02 079 00 057.0 6 99 02 080 00 058.0 6 99 02 081 00 059.0 6 99 02 082 00 060.0 6 99 02 083 00 060.3 6 99 02 084 00 063.0 6 99 02 085 00 063.5 6 99 02 086 00 065.0 6 99 02 087 00 067.0 6 99 02 088 00 069.0 6 99 02 089 00 070.0 6 99 02 090 00 073.0 6 99 02 091 00 075.0 6 99 02 092 00 076.0 6 99 02 093 00 076.1 6 99 02 094 00 076.2 6 99 02 095 00 080.0 6 99 02 096 00 082.5 6 99 02 097 00 088.9 6 99 02 098 00 090.0 6 99 02 099 00 0

Cooling lubricant emulsion Concentrate, 10 l, mixing ratio 1:30, yields 300 l of ready-to-use cooling lubricant

Order number 6 99 02 100 00 0

Flexible steel hose

Order number 3 90 00 000 002

Dust container For extinguishing sparks, metal lid for hose connection, plastic, side handles, capacity approx. 20 l

Order number 6 99 02 000 00 0

Tensioning beltFor flexible steel hose

Order number 3 90 00 000 003

GRIT grinding material R The top grinding belt on the market. Achieves much shorter working times and has superior service life and performance. Especially recommended for machining stainless and high-alloy steels. Extra heavy polyester fabric, fully bonded with artificial resins, with zirconium corundum. Additional top layer for cooling during grinding. Please refer to the table below for order numbers.

75 × 2000Grain No. in pack Order number24 10 6 99 03 000 00 0 36 10 6 99 03 002 00 0 40 10 6 99 03 004 00 0 60 10 6 99 03 007 00 0 80 10 6 99 03 009 00 0 120 10 6 99 03 013 00 0

75 × 2250Grain No. in pack Order number36 10 6 99 03 020 00 0

GRIT GX ACCESSORIES

GXR accessories GXW accessories

GXE accessories

General accessories

GRIT grinding material A Grinding belts with fine grain for fine sanding of metals to final finish. Opti-mum surface results. Heavy cotton fab-ric, fully bonded with artificial resins, with corundum. Please refer to the table below for order numbers.

75 × 2000Grain No. in pack Order number220 10 6 99 03 017 00 0 320 10 6 99 03 018 00 0 400 10 6 99 03 019 00 0

GRIT grinding material S Satin grinding belts with cork granulate for typical satin finishing, grain 220. Fully bonded with artificial resins, waterproof cotton fabric, elastic cork granulate for best surface results.

75 × 2000Grain No. in pack Order number220 10 St. 6 99 03 113 00 0

Stainless steel brush Ø 250 mm x 60 mm, with very high wire drawing strength for highly effici-ent use, mounting hole Ø 51 mm.

0.2 mm-thick wire for thin-walled pipes and profiles. 0.35 mm-thick wire for universal use.

Stainless steel version:Wire thickness mm Order number0.20 6 99 02 009 00 0 0.35 6 99 02 010 00 0

SYNTECH

37

GRIT GI – for industrial use

Industry places very high demands on belt grinders, from volume production to very tough special applications. The GRIT GI range is designed with these very requirements in mind. All belt grinders

have extremely powerful motors and with their robust design, can easily cope with long running periods and high loads. Their ease of use makes them both efficient and safe to use.

Belt grinder GI 150 2H / GI 75 2H + GIBE

Radius grinder GI 150 2H + GIBE + GIR

Longitudinal grinder GI 150 2H + GIBE + GIL

Deburring machine GIE + GIXS / GIXBE Rotary grinding

Deburring machine



Deburring machine Centreless grinder

GIXS 9 90 01 002 00 0GIXBE 9 90 01 009 00 0GIE 7 902 07 GICS 7 902 06

Longitudinal grinding moduleLongitudinal grinder Machine base with dust extraction

Belt grinder (base unit)

Radius grinding moduleRadius grinder

GIBE 9 90 01 004 00 0



GI 150 2H 7 902 05 GIR 9 90 01 007 00 0

GRIT GI

Belt grinder Machine base with dust extraction


GIBE 9 90 01 004 00 0GI 75 2H 7 902 02GI 150 2H 7 902 05

GIL 7 902 08GIBE 9 90 01 004 00 0GI 150 2H 7 902 05

SYNTECH

38

Surface grinding table

Can be adjusted for linear grinding

Speed level

High-performance belt grinders with 2 speed settings and differ-ent widths (75 mm or 150 mm).

Motor

Powerful, robust S1 motor delivers constant speed and high cutting power – even in continuous use.

Belt tensioner

Comfortable operation: low-vibration, patented belt tensioning system.

Technical data

Model GI 150 2H GI 75 2H GIBEPower / consumption kW 2.6 – 3.1 2.6 – 3.1Idling speed rpm 1500 / 3000 1500 / 3000Belt dimensions mm 150 × 2000 75 × 2000Weight kg 82 65 55Order number 7 902 05 7 902 02 9 90 01 004 00 0

Benefits:

Robust design guarantees lasting reliability – even in the toughest conditions. Can be con-verted to a radius and surface grinder.

The GIBE machine base with double dust extraction has a wealth of handy features. It is insensitive to sparks and with a metal swarf container, steel suction hoses and cartridge filter, it responds optimally to the needs of industrial operations.

The basic equipment for industrial belt grinding: GRIT GI belt grind-ers. Every component is specially designed to cope with tough pro-fessional use while the exceedingly powerful motor keeps the speed

constant and delivers high cutting power. GRIT GI belt grinders are available in widths of 75 mm and 150 mm and in a two-speed version.

Belt grinders GI 150 2h / GI 75 2h

GRIT GI 150 2H / GI 75 2H

High working safety

Stop, safety gap and individu-ally adjustable eye guard.

Comfortable operation

Adjustable working height, height-adjustable support.

Optional dust extraction

Prepared for connection to extraction systems.

Integrated dust extraction

Effective double extraction, hot swarf is safely collected in a metal swarf container and filtered into the exhaust air through a fine dust cartridge filter.

Can be extended with add-on modules (e.g. for radius grind-ing, surface grinding etc.).

Modularity

SYNTECH

39

Add-on modules

Radius grinding module GIRFast and precise: The radius grinding module GIR is optimally designed for industrial use. Its high grinding capac-ity is your guarantee of efficiency. And with a belt width of 150 mm, GIR is also suitable for workpieces of larger diameters.

Technical dataModel GIR




Weight kg 109

Order number 9 90 01 007 00 0

Centreless grinding centre GICSThe perfect machine for grinding the outsides of pipes and round materials in volume production: the centreless grinding centre GICS. From rough grind to final finish, the GICS offers impressive working speed and quality of results to match. It gives stainless steel the perfect final grind.

Technical data Model GICS

Power / consumption kW 3,1

Idling speed rpm 1500 –3000

Peripheral speed m/sec 30


Weight kg 200


Longitudinal grinding module GILThe indispensable tool for machine and hand rail construction and welded structures: the GIL module. It is the only system on the market to feature automated infeed for longitudinal grinding. GIL achieves perfect surfaces quickly and efficiently and is ideal for machining stainless steel.

Technical dataModel GIL

Power / consumption kW 0,18



Weight kg 64


Deburring machine GIEStainless steel workpieces can be quickly and effectively deburred with the deburring machine GIE. The robust design and powerful drive make this machine ideal for industrial use. It’s also easy to accommodate in tight spaces, either as a tabletop unit or with optional support stand.

Technical dataModel GIE


Idling speed rpm 1500 / 3000

Tool dimensions 250 × max. Ø x width mm 60 / 120

Weight kg 34


Machine bases GIXS / GIXBEBoth machine bases, either with or without dust extraction, are ideal for the deburring machine GXE. Quick to fit, built to last and extremely stable. Machine bases can also be used for the GI range (GI 100 and GIE).

GRIT GI ADD-ON MODULES



Technical data Model GIXS


Weight kg 18

Order number 9 90 01 002 00 0

Technical data Model GIXBE

Power W 370

Max. vacuum mbar 2.65


Weight kg 58

Order number 9 90 01 009 00 0

SYNTECH

40

GRIT GI ACCESSORIES

Contact rollers Long service lives, low roll resistance thanks to high-quality ball bearings, easy to interchange

Ø mm Order number20.0 6990210100022.0 6990210200025.0 6990210300025.4 6990210400026.9 6990210500028.0 6990210600030.0 6990210700032.0 6990210800033.7 6990210900035.0 6990211000038.0 6990211100038.1 6990211200038.3 6990211300040.0 6990211400042.4 6990211500044.5 6990211600048.3 6990211700050.0 6990211800050.8 6990211900060.0 6990212000060.3 6990212100063.5 6990212200069.0 6990212300076.1 6990212400076.2 6990212500084.0 6990212600088.9 69902127000101.6 69902128000104.0 69902129000108.0 69902130000114.3 69902131000133.0 69902132000139.7 69902133000168.3 69902134000193.7 69902135000

Mitre joint grinding plate GIG For precision mitre joint grinding, easy assembly. Max. pipe Ø: 0° – Ø 110 mm, 30° – Ø 80 mm, 45° – Ø 60 mm

Order number 6 99 02 175 00 0

Suction nozzleFor optimum dust extraction, for con-nection to the GIBE machine base with double extraction

Order number 6 99 02 182 00 0

GIT swivel joint For adapting working area to tight spaces, infinitely variable swivelling range of up to 90°

Order number 6 99 02 176 00 0

Pipe guide set 3

Complete, for both sides of machine, pipes up to 6000 mm in length

Order number 6 99 02 179 50 3

Cooling lubricant emulsionConcentrate, 10 l, mixing ratio 1:30, yields 300 l of ready-to-use cooling lubricant

Order number 6 99 02 100 00 0

Dust containerWith metal lid for hose connection

Order number 6 99 02 000 00 0



GRIT grinding material A Grinding belts with fine grain for fine sanding of metals to final finish. Optimum surface results. Heavy cotton fabric, fully bonded with artificial resins, with corundum. Please refer to the table below for order numbers.




GRIT grinding material SSatin grinding belts with cork granulate for typical satin finishing, grain 220. Fully bonded with artificial resins, waterproof cotton fabric, elastic cork granulate for best surface results.




GIR accessories GIL accessories

GIE accessories

GIBE / GIXBE accessories

General accessories

GICS accessories

Pipe guide set 1


Order number 6 99 02 179 50 1

Pipe guide set 2


Order number 6 99 02 179 50 2

Cartridge filter

Fits GIBE

Order number 3 90 00 001 97 6

Cartridge filterFits GIXBE

Order number 3 90 00 001 00 5

Stainless steel brush Ø 250 mm x 60 mm, with very high wire drawing strength for highly efficient use, mounting hole Ø 51 mm

0.2 mm-thick wire for thin-walled pipes and profiles. 0.35 mm-thick wire for universal use. 0.5 mm-thick wire for thick-walled pipes and profiles and great deburring results

Stainless steel version:Wire thickness mm Order number0.20 6 99 02 009 00 0 0.35 6 99 02 010 00 0

GRIT grinding material R The top grinding belt on the market. Achieves much shorter working times and has superior service life and performance. Especially recommended for machining stainless and high-alloy steels. Extra heavy polyester fabric, fully bonded with artificial resins, with zirconium corundum. Additional top layer for cooling during grinding. Please refer to the table below for order numbers.




SYNTECH

SYNTECH

FEIN surface machining of stainless steel

Make the most of the 3-year FEIN PLUS warranty We offer the 3-year FEIN PLUS warranty for all your FEIN power tools. All you need to do is register your new FEIN power tool at www.fein.com within 6 weeks of purchase.

Do you have any further questions? Or would you like to test FEIN power tools? Your specialist supplier will be happy to help:

Germany: C. & E. FEIN GmbH, Hans-Fein-Str. 81, 73529 Schwäbisch Gmünd-Bargau

Great Britain: FEIN Industrial Power Tools UK Ltd., 4 Badby Park, Heartlands Business Park, Daventry, Northants NN11 8YT, Phone 01327 308730

USA: FEIN Power Tools Inc., 1030 Alcon Street, Pittsburgh, PA 15220, Phone 1-412-922-8886, Toll Free: 1-800-441-9878

Canada: FEIN Canadian Power Tool Company, 323 Traders Blvd. East, Mississauga, Ontario L4Z 2E5, Phone 905 890-1390, Toll Free: 1-800-265-2581

FEIN Quebec Ltee, 2810 De Miniac, St. Laurent, Quebec H4S 1K9, Phone 514 331-7390, Toll Free: 1-800-789-8181

Australia: FEIN Power Tools Pty. Ltd., Unit 7/55 – 61 Pine Road, Yennora N.S.W. 2161; P.O. Box 328, Fairfield N.S.W. 1860, Phone 1300 798 688

Regional Office of Asia Pacific: FEIN Power Tools Asia Limited, A1, 11/F, Block A, Mai Hing Industrial Building, 16-18 Hing Yip Street, Kwun Tong, Kowloon, Hong Kong, Phone +852 2341-1026, Fax +852 2341-2250

Prin

ted

in G

erm

any.

Dia

gram

s no

t bin

ding

. Tec

hnic

al d

etai

ls s

ubje

ct t

o ch

ange

. 1 8

8 55

614

01

0 0

3.09

EN

www.fein.com

SYNTECH

Linda

Typewritten Text

SYNTECH SURFACE FINISHING SPECIALISTS PO BOX 19-341, 12B SAUNDERS PLACE, AVONDALE, AUCKLAND NEW ZEALAND PHONE: +64 9 820 2121, FAX: +64 9 820 0101 EMAIL: [email protected] www.syntechnz.com

SYNTECH · Overview of FEIN machines and sets 14 Compact angle grinder WSG 14-70 E 16 Sets and...

Documents

Transcript of SYNTECH · Overview of FEIN machines and sets 14 Compact angle grinder WSG 14-70 E 16 Sets and...