synchrony EASY View (Instinctive) - Fact Sheets · synchrony EASY View (Instinctive) - Fact Sheets...
22
Carl Zeiss Vision Version 1/17 synchrony EASY View (Instinctive) - Fact Sheets Table of Contents EASY View (Instinctive) EASY View (Instinctive) 1.67 High Index 1 – 3 EASY View (Instinctive) 1.67 High Index PhotoFusion Gray 4 – 6 EASY View (Instinctive) 1.67 High Index Transitions Gray 7 – 9 EASY View (Instinctive) 1.59 Polycarbonate 10 – 11 EASY View (Instinctive) 1.59 PhotoFusion Gray/Brown 12 – 13 EASY View (Instinctive) 1.59 Transitions Gray/Brown 14 – 15 EASY View (Instinctive) 1.5 16 – 17 EASY View (Instinctive) 1.5 PhotoFusion Gray/Brown 18 – 19 EASY View (Instinctive) 1.5 Transitions Gray/Brown 20 – 21
Transcript of synchrony EASY View (Instinctive) - Fact Sheets · synchrony EASY View (Instinctive) - Fact Sheets...
Carl Zeiss Vision Version 1/17
synchrony EASY View (Instinctive) - Fact Sheets Table of Contents
EASY View (Instinctive)
EASY View (Instinctive) 1.67 High Index 1 – 3
EASY View (Instinctive) 1.67 High Index PhotoFusion Gray 4 – 6
EASY View (Instinctive) 1.67 High Index Transitions Gray 7 – 9
EASY View (Instinctive) 1.59 Polycarbonate 10 – 11
EASY View (Instinctive) 1.59 PhotoFusion Gray/Brown 12 – 13
EASY View (Instinctive) 1.59 Transitions Gray/Brown 14 – 15
EASY View (Instinctive) 1.5 16 – 17
EASY View (Instinctive) 1.5 PhotoFusion Gray/Brown 18 – 19
EASY View (Instinctive) 1.5 Transitions Gray/Brown 20 – 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 HC
Document Number: 00593.FS2 Reviewed by: Geoff Riley, 10 Oct 2016 For External Distribution Page 1 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
N88 L6738 SYNC SF P EAS V (INST) 167 HC –B- Country of
Origin required on Label
US FDA disclaimer Required
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Recommended Rx Range (D)
73 1.00 0.75 to 3.50 –10.00 to –5.25
73 3.00 0.75 to 3.50 –5.00 to –0.75
78 5.00 0.75 to 3.50 –0.50 to +2.00
73 6.00 0.75 to 3.50 +2.25 to +3.50
73 7.00 0.75 to 3.50 +3.75 to +6.00
3. Material & Coating Specifications:
Type 1.67 MR7
Refractive Index nd = 1.659 ne = 1.664
Abbe Number d = 32 e = 32
Density 1.35 g/cm3
UV Protection (ISO) UVA : 100 %, UVB : 100 % 2.0 mm Centre Thickness
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness
(mm) (± 1.0)
Nominal Edge
Thickness at ‘A’ (mm)
Nominal Packaged Weight
(g)
1.00 1.41 375.89 -6.00 7.9 13.6 69
3.00 3.14 168.79 -6.00 8.9 12.3 68
5.00 4.96 106.85 -6.00 8.7 9.8 68
6.00 5.75 92.17 -6.00 11.0 10.8 70
7.00 6.78 78.17 -6.00 12.2 10.5 73
1 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 HC
Document Number: 00593.FS2 Reviewed by: Geoff Riley, 10 Oct 2016 For External Distribution Page 2 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
5. Surfacing: Recommended centre & edge thicknesses for all regions:
Power Range (D)
USA Market Minimum Centre
Thickness
Int’l Market Minimum Centre Thickness (mm)
All Markets Minimum Edge Thickness (mm)
High Minus to -2.00 1.5 1.2
–1.75 to +2.00 2.0 or * 2.0 or * 1.3 *
+2.25 to High Pus 1.3
* Thicknesses are based on whichever is the limiting factor
6. Product Markings:
Ink Markings:
ode
Front Surface: Coding Back Surface: Coding
2 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 HC
Document Number: 00593.FS2 Reviewed by: Geoff Riley, 10 Oct 2016 For External Distribution Page 3 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
7. Product Range (Minus Cylinder):
Minus Cyls
0.00
-0.2
5
-0.5
0
-0.7
5
-1.0
0
-1.2
5
-1.5
0
-1.7
5
-2.0
0
-2.2
5
-2.5
0
-2.7
5
-3.0
0
-3.2
5
-3.5
0
-3.7
5
-4.0
0
+6.0075
S 5025
P +5.0075
H 5025
E +4.0075
R 5025
E +3.0075
S 5025
+2.00755025
+1.00755025
Plano255075
-1.00255075
-2.00255075
-3.00255075
-4.00255075
-5.00255075
-6.00255075
-7.00255075
-8.00255075
-9.00255075
-10.00
0.00
-0.2
5
-0.5
0
-0.7
5
-1.0
0
-1.2
5
-1.5
0
-1.7
5
-2.0
0
-2.2
5
-2.5
0
-2.7
5
-3.0
0
-3.2
5
-3.5
0
-3.7
5
-4.0
0
1.00
7.00
6.00
5.00
3.00
3 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 Photochromic
Document Number: 00594.FS1 Reviewed by: Geoff Riley, 22 Nov 2016 For External Distribution Page 1 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
N89 L6739 SYNC SF P EAS V (INST) 167 PH GRY HC AB- Country of
Origin required on Label
US FDA disclaimer Required
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Recommended Rx Range (D)
73 1.00 0.75 to 3.50 –10.00 to –5.25
73 3.00 0.75 to 3.50 –5.00 to –0.75
78 5.00 0.75 to 3.50 –0.50 to +2.00
73 6.00 0.75 to 3.50 +2.25 to +3.50
73 7.00 0.75 to 3.50 +3.75 to +6.00
3. Material & Coating Specifications:
Type 1.67 MR7
Refractive Index nd = 1.659 ne = 1.664
Abbe Number d = 32 e = 32
Density 1.35 g/cm3
UV Protection (ISO) UVA : 100 %, UVB : 100 % 2.0 mm Centre Thickness
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness
(mm) (± 1.0)
Nominal Edge
Thickness at ‘A’ (mm)
Nominal Packaged Weight
(g)
1.00 1.34 395.52 -6.00 7.9 13.6 69
3.00 3.05 173.77 -6.00 8.9 12.3 68
5.00 4.89 108.38 -6.00 8.7 9.8 68
6.00 5.67 93.47 -6.00 11.0 10.8 70
7.00 6.72 78.87 -6.00 12.2 10.5 73
4 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 Photochromic
Document Number: 00594.FS1 Reviewed by: Geoff Riley, 22 Nov 2016 For External Distribution Page 2 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
5. Surfacing: Recommended centre & edge thicknesses for all regions:
Power Range (D)
USA Market Minimum Centre
Thickness
Int’l Market Minimum Centre Thickness (mm)
All Markets Minimum Edge Thickness (mm)
High Minus to -2.00 1.5 1.2
–1.75 to +2.00 2.0 or * 2.0 or * 1.3 *
+2.25 to High Pus 1.3
* Thicknesses are based on whichever is the limiting factor
6. Product Markings:
Ink Markings:
ode
Front Surface: Coding Back Surface: Coding
5 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 Photochromic
Document Number: 00594.FS1 Reviewed by: Geoff Riley, 22 Nov 2016 For External Distribution Page 3 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
7. Product Range (Minus Cylinder):
Minus Cyls0.
00
-0.2
5
-0.5
0
-0.7
5
-1.0
0
-1.2
5
-1.5
0
-1.7
5
-2.0
0
-2.2
5
-2.5
0
-2.7
5
-3.0
0
-3.2
5
-3.5
0
-3.7
5
-4.0
0
+6.0075
S 5025
P +5.0075
H 5025
E +4.0075
R 5025
E +3.0075
S 5025
+2.00755025
+1.00755025
Plano255075
-1.00255075
-2.00255075
-3.00255075
-4.00255075
-5.00255075
-6.00255075
-7.00255075
-8.00255075
-9.00255075
-10.00
0.00
-0.2
5
-0.5
0
-0.7
5
-1.0
0
-1.2
5
-1.5
0
-1.7
5
-2.0
0
-2.2
5
-2.5
0
-2.7
5
-3.0
0
-3.2
5
-3.5
0
-3.7
5
-4.0
0
1.00
7.00
6.00
5.00
3.00
6 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 Transitions Signature VII
Document Number: 00572.FS1 Reviewed by: Geoff Riley, 23 Jan 2017 For External Distribution Page 1 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
Y73 L6804 SYNC SF P EAS V (INST) 167 TR GRY HC DB- Country of
Origin required on Label
US FDA disclaimer Required
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Recommended Rx Range (D)
73 1.00 0.75 to 3.50 –10.00 to –5.25
73 3.00 0.75 to 3.50 –5.00 to –0.75
78 5.00 0.75 to 3.50 –0.50 to +2.00
73 6.00 0.75 to 3.50 +2.25 to +3.50
73 7.00 0.75 to 3.50 +3.75 to +6.00
3. Material & Coating Specifications:
Type 1.67 MR7
Refractive Index nd = 1.659 ne = 1.664
Abbe Number d = 32 e = 32
Density 1.35 g/cm3
UV Protection (ISO) UVA : 100 %, UVB : 100 % 2.0 mm Centre Thickness
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness
(mm) (± 1.0)
Nominal Edge
Thickness at ‘A’ (mm)
Nominal Packaged Weight
(g)
1.00 1.38 384.06 -6.00 7.9 13.6 69
3.00 3.11 170.42 -6.00 8.9 12.3 68
5.00 4.94 107.29 -6.00 8.7 9.8 68
6.00 5.72 92.66 -6.00 11.0 10.8 70
7.00 6.75 78.52 -6.00 12.2 10.5 73
7 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 Transitions Signature VII
Document Number: 00572.FS1 Reviewed by: Geoff Riley, 23 Jan 2017 For External Distribution Page 2 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
5. Surfacing: Recommended centre & edge thicknesses for all regions:
Power Range (D)
USA Market Minimum Centre
Thickness
Int’l Market Minimum Centre Thickness (mm)
All Markets Minimum Edge Thickness (mm)
High Minus to -2.00 1.5 1.2
–1.75 to +2.00 2.0 or * 2.0 or * 1.3 *
+2.25 to High Pus 1.3
* Thicknesses are based on whichever is the limiting factor
6. Product Markings:
Ink Markings:
ode
Front Surface: Coding Back Surface: Coding
8 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.67 Transitions Signature VII
Document Number: 00572.FS1 Reviewed by: Geoff Riley, 23 Jan 2017 For External Distribution Page 3 of 3
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
7. Product Range (Minus Cylinder):
Minus Cyls0.
00
-0.2
5
-0.5
0
-0.7
5
-1.0
0
-1.2
5
-1.5
0
-1.7
5
-2.0
0
-2.2
5
-2.5
0
-2.7
5
-3.0
0
-3.2
5
-3.5
0
-3.7
5
-4.0
0
+6.0075
S 5025
P +5.0075
H 5025
E +4.0075
R 5025
E +3.0075
S 5025
+2.00755025
+1.00755025
Plano255075
-1.00255075
-2.00255075
-3.00255075
-4.00255075
-5.00255075
-6.00255075
-7.00255075
-8.00255075
-9.00255075
-10.00
0.00
-0.2
5
-0.5
0
-0.7
5
-1.0
0
-1.2
5
-1.5
0
-1.7
5
-2.0
0
-2.2
5
-2.5
0
-2.7
5
-3.0
0
-3.2
5
-3.5
0
-3.7
5
-4.0
0
1.00
7.00
6.00
5.00
3.00
9 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.59
Document Number: 00084.FS4 Reviewed by: Geoff Riley, 10 Oct 2016 For External Distribution Page 1 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
130 L2222 SYNC SF P EAS V (INST) 159 UT --- Country of Origin required on Label
US FDA disclaimer Required
324 L2221 SYNC SF P EAS V (INST) 159 PG ---
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Rx Range Recommended (D)
75 1.50 1.00 to 3.50 -9.00 to -5.25
75 3.50 1.00 to 3.50 -5.00 to -0.75
75 5.50 1.00 to 3.50 +0.50 to +2.00
75 7.50 1.00 to 3.50 +2.25 to +5.00
3. Material & Coating Specifications:
Type 1.59 Polycarbonate
Refractive Index nd = 1.586 ne = 1.59
Abbe Number d = 30 e = 29
Density 1.20 g/cm3
UV Protection (ISO) Coated: 2.0mm Centre Thickness
UVA : 100 %, UVB : 100 %
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness (± 1.0mm)
Nominal Edge Thickness at
‘A’ (mm)
1.50 1.57 337.58 -5.75 7.8 12.6
3.50 3.54 149.72 -5.75 7.7 10.1
5.50 5.42 97.79 -5.75 8.3 8.3
7.50 7.47 70.95 -8.00 11.3 11.7
5. Surfacing: Recommended centre & edge thicknesses:
Power Range (D)
Minimum Centre Thickness
Minimum Edge Thickness (mm)
High Minus to -2.00 1.5
–1.75 to +2.00 2.0 or * 1.5 *
+2.25 to High Pus 1.0
* Thicknesses are based on whichever is the limiting factor
10 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.59
Document Number: 00084.FS4 Reviewed by: Geoff Riley, 10 Oct 2016 For External Distribution Page 2 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
6. Product Markings:
Product Markings: Recommended Range Chart: Front Surface: Semi-Visible Markings
Front Surface: Ink Markings
Back Surface Markings
-9.00
-8.00
-7.00
-6.00
-5.00
-4.00
-3.00
-2.00
-1.00
PLANO
+1.00
+2.00
+3.00
+4.00
+5.00
SPHERE
SPHERE
-1.00
-1.00
-2.00
-2.00
-3.00
-3.00
-4.00
-4.00
1.50
3.50
5.50
7.50
Compact PRO 5 PhotoFusion technology
(Minus cyl convention)
11 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.59
Photochromic
Document Number: 00247.FS4 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 1 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
F54 L6114 SYNC SF P EAS V (INST) 159 PH GRY HC --- Country of Origin required on Label
US FDA disclaimer Required
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Rx Range Recommended (D)
72 1.50 1.00 to 3.00 -9.00 to -5.25
72 3.50 1.00 to 3.00 -5.00 to -0.75
72 5.50 1.00 to 3.00 +0.50 to +2.00
72 7.50 1.00 to 3.00 +2.25 to +5.00
3. Material & Coating Specifications:
Type 1.59 Polycarbonate
Refractive Index nd = 1.586 ne = 1.59
Abbe Number d = 30 e = 29
Density 1.20 g/cm3
UV Protection (ISO) Coated, Activated: 2.0mm Centre Thickness
UVA : 100 %, UVB : 100 %
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness (± 1.0mm)
Nominal Edge Thickness at
‘A’ (mm)
1.50 1.62 327.16 -5.75 7.6 12.5
3.50 3.61 146.81 -5.75 7.5 9.9
5.50 5.47 96.89 -5.75 8.1 7.9
7.50 7.53 70.38 -8.00 11.1 11.3
5. Surfacing: Recommended centre & edge thicknesses:
Power Range (D)
Minimum Centre Thickness
Minimum Edge Thickness (mm)
High Minus to -2.00 1.5
–1.75 to +2.00 2.0 or * 1.5 *
+2.25 to High Pus 1.0
* Thicknesses are based on whichever is the limiting factor
12 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.59
Photochromic
Document Number: 00247.FS4 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 2 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
6. Product Markings:
Product Markings: Recommended Range Chart: Front Surface: Semi-Visible Markings
Front Surface: Ink Markings
Back Surface Markings
-9.00
-8.00
-7.00
-6.00
-5.00
-4.00
-3.00
-2.00
-1.00
PLANO
+1.00
+2.00
+3.00
+4.00
+5.00
SPHERE
SPHERE
-1.00
-1.00
-2.00
-2.00
-3.00
-3.00
-4.00
-4.00
1.50
3.50
5.50
7.50
Compact PRO 5 PhotoFusion technology
(Minus cyl convention)
13 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.59
Transitions Signature VII
Document Number: 00420.FS2 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 1 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
V66 L6438 SYNC SF P EAS V (INST) 159 TR GRY HC --- Country of Origin required on Label
US FDA disclaimer Required
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Rx Range Recommended (D)
72 1.50 1.00 to 3.00 -9.00 to -5.25
72 3.50 1.00 to 3.00 -5.00 to -0.75
72 5.50 1.00 to 3.00 +0.50 to +2.00
72 7.50 1.00 to 3.00 +2.25 to +5.00
3. Material & Coating Specifications:
Type 1.59 Polycarbonate
Refractive Index nd = 1.586 ne = 1.59
Abbe Number d = 30 e = 29
Density 1.20 g/cm3
UV Protection (ISO) Coated, Activated: 2.0mm Centre Thickness
UVA : 100 %, UVB : 100 %
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness (± 1.0mm)
Nominal Edge Thickness at
‘A’ (mm)
1.50 1.62 327.16 -5.75 7.6 12.5
3.50 3.61 146.81 -5.75 7.5 9.9
5.50 5.47 96.89 -5.75 8.1 7.9
7.50 7.53 70.38 -8.00 11.1 11.3
5. Surfacing: Recommended centre & edge thicknesses:
Power Range (D)
Minimum Centre Thickness
Minimum Edge Thickness (mm)
High Minus to -2.00 1.5
–1.75 to +2.00 2.0 or * 1.5 *
+2.25 to High Pus 1.0
* Thicknesses are based on whichever is the limiting factor
14 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.59
Transitions Signature VII
Document Number: 00420.FS2 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 2 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
6. Product Markings:
Product Markings: Recommended Range Chart: Front Surface: Semi-Visible Markings
Front Surface: Ink Markings
Back Surface Markings
-9.00
-8.00
-7.00
-6.00
-5.00
-4.00
-3.00
-2.00
-1.00
PLANO
+1.00
+2.00
+3.00
+4.00
+5.00
SPHERE
SPHERE
-1.00
-1.00
-2.00
-2.00
-3.00
-3.00
-4.00
-4.00
1.50
3.50
5.50
7.50
Compact PRO 5 PhotoFusion technology
(Minus cyl convention)
15 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.5
Document Number OEM5-5-1.FS1 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 1 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
520 L2237 SYNC SF P EAS V (INST) 15 UNC --- Country of Origin required on Label
Yes, US FDA disclaimer Required 693 L2238 SYNC SF P EAS V (INST) 15 HC ---
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Rx Range Recommended (D)
75/80 1.50 0.75 to 3.50 -9.00 to -5.25
75/80 3.50 0.75 to 3.50 -5.00 to -0.75
75/80 5.50 0.75 to 3.50 +0.50 to +2.00
75/80 7.50 0.75 to 3.50 +2.25 to +5.00
3. Material & Coating Specifications:
Type 1.5 Polymer
Refractive Index nd = 1.499 ne = 1.500
Abbe Number d = 58 e = 56
Density 1.32 g/cm3
UV Protection (ISO) UVA : 94 %, UVB : 100 %
Coating Type Hard Coated & Uncoated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness (± 1.0mm)
Nominal Edge Thickness at
‘A’ (mm)
1.50 1.55 341.94 -3.00 11.9 13.5
3.50 3.50 151.43 -6.00 9.9 12.8
5.50 5.40 98.15 -6.00 8.4 8.8
7.50 7.44 71.24 -6.00 12.0 9.1
5. Surfacing: Recommended centre & edge thicknesses for all regions:
Power Range (D)
USA Market Minimum Centre
Thickness
Int’l Market Minimum Centre Thickness (mm)
All Markets Minimum Edge Thickness (mm)
High Minus to -2.00 2.0 2.0
–1.75 to +2.00 2.0 or * 2.0 or * 1.5 *
+2.25 to High Pus 1.5
* Thicknesses are based on whichever is the limiting factor
16 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.5
Document Number OEM5-5-1.FS1 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 2 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
6. Product Markings:
Product Markings: Recommended Range Chart: Front Surface: Semi-Visible Markings
Front Surface: Ink Markings
Back Surface Markings
-9.00
-8.00
-7.00
-6.00
-5.00
-4.00
-3.00
-2.00
-1.00
PLANO
+1.00
+2.00
+3.00
+4.00
+5.00
SPHERE
SPHERE
-1.00
-1.00
-2.00
-2.00
-3.00
-3.00
-4.00
-4.00
1.50
3.50
5.50
7.50
Compact PRO 5 PhotoFusion technology
(Minus cyl convention)
17 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.5
Photochromic
Document Number: 00300.FS3 Reviewed by: Geoff Riley, 13 Oct 2016 For External Distribution Page 1 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code: LGC: LGC Description: Notes: FDA:
H08 L6471 SYNC SF P EAS V (INST) 15 PH GRY HC A-- Country of Origin required on Label
US FDA disclaimer Required H09 L6472 SYNC SF P EAS V (INST) 15 PH BRN HC A--
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Rx Range Recommended (D)
73/78 1.50 0.75 to 3.50 -9.00 to -5.25
73/78 3.50 0.75 to 3.50 -5.00 to -0.75
73/78 5.50 0.75 to 3.50 +0.50 to +2.00
73/78 7.50 0.75 to 3.50 +2.25 to +5.00
3. Material & Coating Specifications:
Type 1.5 Polymer
Refractive Index nd = 1.499 ne = 1.500
Abbe Number d = 58 e = 56
Density 1.32 g/cm3
UV Protection (ISO) Coated, Activated: 2.0mm Centre Thickness
UVA : 100 %, UVB : 100 %
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness (± 1.0mm)
Nominal Edge Thickness at
‘A’ (mm)
1.50 1.56 339.74 -3.00 11.9 13.5
3.50 3.50 151.43 -6.00 9.9 12.8
5.50 5.40 98.15 -6.00 8.4 8.8
7.50 7.45 71.14 -6.00 12.0 9.1
5. Surfacing: Recommended centre & edge thicknesses for all regions:
Power Range (D)
USA Market Minimum Centre
Thickness
Int’l Market Minimum Centre Thickness (mm)
All Markets Minimum Edge Thickness (mm)
High Minus to -2.00 2.0 2.0
–1.75 to +2.00 2.0 or * 2.0 or * 1.5 *
+2.25 to High Pus 1.5
* Thicknesses are based on whichever is the limiting factor
18 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.5
Photochromic
Document Number: 00300.FS3 Reviewed by: Geoff Riley, 13 Oct 2016 For External Distribution Page 2 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
6. Product Markings:
Product Markings: Recommended Range Chart: Front Surface: Semi-Visible Markings
Front Surface: Ink Markings
Back Surface Markings
-9.00
-8.00
-7.00
-6.00
-5.00
-4.00
-3.00
-2.00
-1.00
PLANO
+1.00
+2.00
+3.00
+4.00
+5.00
SPHERE
SPHERE
-1.00
-1.00
-2.00
-2.00
-3.00
-3.00
-4.00
-4.00
1.50
3.50
5.50
7.50
Compact PRO 5 PhotoFusion technology
(Minus cyl convention)
19 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.5
Transitions® Signature VII
Document Number: 00363.FS3 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 1 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
1. Customer Product Codes
CAT Code:
LGC: LGC Description: Notes: FDA:
V63 L6392 SYNC SF P EAS V (INST) 15 TR BRN HC DE- Country of Origin required on Label
US FDA disclaimer Required V64 L6391 SYNC SF P EAS V (INST) 15 TR GRY HC DE-
2. Product Range:
Nominal Diameter (mm)
Nominal Base Curve (D)
Add Power Range (D) Rx Range Recommended (D)
73/78 1.50 0.75 to 3.50 -9.00 to -5.25
73/78 3.50 0.75 to 3.50 -5.00 to -0.75
73/78 5.50 0.75 to 3.50 +0.50 to +2.00
73/78 7.50 0.75 to 3.50 +2.25 to +5.00
3. Material & Coating Specifications:
Type CR-607®
Refractive Index nd = 1.497 ne = 1.499
Abbe Number d = 61 e = 57 Density 1.27 g/cm
3
UV Protection (ISO) Activated: 2.0mm Centre Thickness
UVA : 100 %, UVB : 100 %
Coating Type Hard Coated
4. Lens Geometry:
Nominal Base
True Front Curve (D) (1.530)
Radii (mm)
Nominal Back Curve
(D)
Centre Thickness (± 1.0mm)
Nominal Edge Thickness at
‘A’ (mm)
1.50 1.57 337.58 -3.00 11.9 13.4
3.50 3.50 151.43 -6.00 9.9 12.6
5.50 5.40 98.15 -6.00 8.4 8.8
7.50 7.47 70.95 -6.00 12.0 9.2
5. Surfacing: Recommended centre & edge thicknesses for all regions:
Power Range (D)
USA Market Minimum Centre
Thickness
Int’l Market Minimum Centre Thickness (mm)
All Markets Minimum Edge Thickness (mm)
High Minus to -2.00 2.0 2.0
–1.75 to +2.00 2.0 or * 2.0 or * 1.5 *
+2.25 to High Pus 1.5
* Thicknesses are based on whichever is the limiting factor
20 of 21
PRODUCT FACT SHEET
Product Name synchrony Semi-Finished Progressive Easy View (Instinctive) 1.5
Transitions® Signature VII
Document Number: 00363.FS3 Reviewed by: Geoff Riley, 02 Sep 2016 For External Distribution Page 2 of 2
© 2016 Carl Zeiss Vision International GmbH Turnstraße 27 Phone: +49 (7361) 591-302 Germany 73430 Aalen www.zeiss.com/vision
Subject to change in design and scope of delivery and as a result of ongoing technical development.
6. Product Markings:
Product Markings: Recommended Range Chart: Front Surface: Semi-Visible Markings
Front Surface: Ink Markings
Back Surface Markings
-9.00
-8.00
-7.00
-6.00
-5.00
-4.00
-3.00
-2.00
-1.00
PLANO
+1.00
+2.00
+3.00
+4.00
+5.00
SPHERE
SPHERE
-1.00
-1.00
-2.00
-2.00
-3.00
-3.00
-4.00
-4.00
1.50
3.50
5.50
7.50
Compact PRO 5 PhotoFusion technology
(Minus cyl convention)
21 of 21
