Synchronous Optical Networks SONET - Academics | WPIrek/Undergrad_Nets/C04/SONET.pdfNetworks: SONET...

24
Networks: SONET 1 Synchronous Optical Networks SONET

Transcript of Synchronous Optical Networks SONET - Academics | WPIrek/Undergrad_Nets/C04/SONET.pdfNetworks: SONET...

Networks: SONET 1

Synchronous Optical NetworksSONET

Networks: SONET 2

Telephone Networks {Brief History}

• Digital carrier systems– The hierarchy of digital signals that the telephone

network uses.– Trunks and access links organized in DS (digital

signal) hierarchy– Problem: rates are not multiples of each other.

• In the 1980’s Bellcore developed the Synchronous Optical Network (SONET) standard.

• Previous efforts include: ISDN and BISDN.

Networks: SONET 3

North American Digital Hierarchy

PrimaryMultiplexEg. DigitalSwitch30 chan PCM

4th orderMultiplex

x4

2nd orderMultiplex

x4

3rd orderMultiplex

x4

34.368 Mbps2.048 Mbps 8.448 Mbps139.264 Mbps

CEPT 1CEPT 4

European Digital Hierarchy

28

M13Multiplex

M23Multiplex

x7

PrimaryMultiplexEg. DigitalSwitch24 chan PCM

M12Multiplex

x4

1

DS3 44.736 Mbps

DS1 1.544 Mbps DS2 6.312 Mbps DS3 44.736 Mbps

!!!

Figure 4.5Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 4

Networks: SONET 5

SONETSONET:: encodes bit streams into optical signals propagated

over optical fiber. SONET defines a technology for carrying many signals of different capacities through a synchronous,flexible, optical hierarchy.

• A bit-way implementation providing end-to-end transport of bit streams.

• All clocks in the network are locked to a common master clock so that simple TDM can be used.

• Multiplexing done by byte interleaving.• SONET is backward compatible to DS-1 and E-1 and forward

compatible to ATM cells.• Demultiplexing is easy.

Networks: SONET 6

SONET

• Transmission links of the telephone network have been changing to SONET where rates are arranged in STS (Synchronous Transfer Signal) hierarchy.

• The hierarchy is called SDH (Synchronous Digital Hierarchy) defined by CCITT.

• It is an ITU standard.

Networks: SONET 7

Networks: SONET 8

Low-SpeedMappingFunction

MediumSpeed

MappingFunction

High-Speed

MappingFunction

DS3

44.736

DS1DS2

CEPT-1

CEPT-4

139.264

ATM150 Mbps

STS-1

STS-1

STS-1STS-1STS-1

STS-1STS-1STS-1

STS-3c

STS-3c

OC-n

Scrambler E/O

51.84 Mbps

High-Speed

MappingFunction

MuxSTS-n

!!!

!!!

Figure 4.8Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 9

Networks: SONET 10

SONET Architecture

• SONET topology can be a mesh, but most often it is a dual ring.

• Standard component of SONET ring is an ADM (Add/Drop Multiplexer)– Drop one incoming multiplexed stream and

replace it with another stream.– Used to make up bi-directional line switching

rings.

Networks: SONET 11

a

b

c

d

a

b

c

d

(a) Dual ring (b) Loop-around in response to fault

Figure 4.12

ADM

ADM

ADM

ADM

Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 12SONET Ring

Networks: SONET 13

MUX DEMUX MUX DEMUX

MUX DEMUX

(a) pre-SONET multiplexing

removetributary

inserttributary

ADM

removetributary

inserttributary

(b) SONET Add-Drop multiplexing

Figure 4.9Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 14

a

b

c

3 ADMs

physical loop net

OC-3nOC-3n

OC-3n

Figure 4.10Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 15

Inter-OfficeRings

MetroRing

RegionalRing

Figure 4.13Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 16

STE: Section Terminating Equipment, e.g. a repeaterLTE: Line Terminating Equipment, e.g. a STS-1 to STS-3 multiplexerPTE: Path Terminating Equipment, e.g. an STS-1 multiplexer

optical

section

optical

sectionoptical

section

optical

sectionline

optical

sectionline

optical

sectionlinepath

optical

sectionlinepath

(a)

(b)

STSPTE

LTESTE

STS-1 Path

STS LineSection Section

Mux Muxreg reg regSONETTerminal

STE STELTE

STSPTE

SONETTerminal

Figure 4.14

SONET Architecture

Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 17

Networks: SONET 18

Mux = BIM (Byte Interleaved Multiplexer)

Reg = Regenerator

• Boosts power of optical signal• Optical signal converted to electrical signal.• Amplify electrical signal.• Amplified electrical signal converted back to optical signal.

Networks: SONET 19

Networks: SONET 20

Networks: SONET 21

B BB 87B

InformationPayload 9 Rows

125 µsTransportoverhead

90 bytes

SectionOverhead 3 rows

6 rowsLineOverhead

Figure 4.15

SONET frame

SPE Synchronous Payload Envelope

Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Networks: SONET 22

Pointer87 columns

9rows

first column is path overhead

SynchronousPayload

Envelope

framek

framek+1

Pointer

first octet

last octet

Figure 4.16Leon-Garcia & Widjaja: Communication Networks

SPE straddling SONET frame

Copyright ©2000 The McGraw Hill Companies

Networks: SONET 23

ATM Cells in an STS-3 Frame

Networks: SONET 24

STS-1 STS-1

STS-1 STS-1

STS-1 STS-1

Map

Map

Map

STS-1 STS-1

STS-1 STS-1

STS-1 STS-1B

yteInterleave

STS-3

IncomingSTS-1 Frames

Synchronized NewSTS-1 Frames

Figure 4.17Leon-Garcia & Widjaja: Communication NetworksCopyright ©2000 The McGraw Hill Companies

Synchronous Multiplexing in SONET