Synapsense Power Metering Data Sheet

8/11/2019 Synapsense Power Metering Data Sheet

1/4

copyright 2011 SynapSense Corporation Page1

Copyright 2011. All Rights Reserved. SynapSense Corporation. SynapSense, the SynapSense logo, and SynapSoft are trademarks of SynapSenseCorporation. All third-party brand and product names are the trademarks of their respective owners and are used solely for informational purposes.

SynapSensePower Metering

Technical Data Sheet

Overview

SynapSensePower Metering offers 3-phase AC power metering for wye or delta loads. It uses the

SquareD PowerLogic ION 6200 meter to provide an adjustable display for easy to read energy, power,

current, voltage, power factor, and harmonic data. The meters high accuracy is revenue grade and

compatible with a wide range of solid or split core current transducers (CTs) from 50 amp up to 4000 amp

models.

The meter comes pre-installed in a wall-mount, single High Density Meter (HDM) enclosure. The HDM

enclosure includes and knockouts for conduit connections. Terminal blocks for 3-phase AC wiring,

CTs, ground, and Modbus RS422/RS485 connections are pre-wired to the meter.

Power Metering works in tandem with the SynapSense Web Console. The Web Console is configured

with a wye or delta and enables you to visually see the 3-phase current, voltage, demand power, power

factor, total harmonic distortion, and energy data including summary information. The Web Console also

enables you to track historical information from the power meter, using the historical data graphs.

Power Metering GeneralSpecifications

SynapSense Power Metering shown in an HDMEnclosure

Features 3-phase power metering

Per phase data

Meter display provides local dataaccess; the Web Consoleprovides up to 21 data points withhistorical charting

Available with split core CTsranging from 50 to 4000 amp in avariety of models

Power MeterType

PowerLogic ION6200

RevenueCertification

ANSI and Measurement Canadaoptions

Factory-sealed version availablein Canada

Communications RS-422/485 Modbus RTU forintegration with SynapSense WebConsole

Pulse Outputs Optional: kWh summary informationavailable via the SynapSense WirelessSensor Network (WSN)

3-PhaseMetering

100 to 480 VAC L-L (50 to 60 Hz)


2/4

copyright 2011 SynapSense Corporation Page2Rev A-5-2014

SynapSense Proprietary & Confidential

Power Meter Overview

The SquareD ION 6200 Energy Meter features:

64 samples per cycle

IEC 60687 class 0.5 compliant

Four quadrant energy and demand 49 real-time, true RMS electrical parameters

Per phase voltage, current, peak current,

demand, watts, VARs, kWh, and more

Neutral current, Total Harmonic Distortion

(THD), frequency, power factor

Power Meter Accuracy

Accuracy Speci ficati on

Voltage L-N 0.3% reading, L-L 0.5% reading

Frequency 0.1 Hz

Current >= 5% of full scale: 0.3% reading


3/4



Veris CT General Specifications

Specification Description

Overview The H681x-xxx series of 5 Ampsplit-core current transformersprovide secondary amperage

proportional to the primary(sensed) current. For use withpower meters, data loggers,chart recorders, and otherinstruments.

Leads 18AWG, 600VAC, 6' standardlength

OperatingTemperature Range

15 to 60C (5 to 140F)

Storage TemperatureRange

-40 to 70C (-40 to 158)

Humidity Range 0-95% non-condensing

Max. Voltage L-N

Sensed Conductor

600VAC (basic insulationrating)

Frequency Range 50/60 Hz

Altitude of Operation 3km maximum

Installation Category Cat II or Cat III

Veris CT Ratings

Model Sensing

Current

(A)

Frequency

(Hz)

Output

(A)

Weight

(kg)

H6810 0 to 300 50/60 0 to 5 0.340

H6811 0 to 800 50/60 0 to 5 0.580

H6812 0 to 2400 50/60 0 to 5 0.870

Veris CT Accuracy

Model # F.S. Accuracy

(96%)

Burden

Capacity (VA)

H6810-100A-5A 4 .07

H6810-200A-5A 1 2.5

H6810-300A-5A 1 2.5

H6811-400A-5A 1 5.0

H6811-600A-5A 1 5.0

H6811-800A-5A 1 12.5

H6812-800A-5A 1 5.0

H6812-1200A-5A 1 22.5

H6812-1600A-5A 1 22.5

H6812-2400A-5A 1 22.5

Veris CT Mechanical Dimensions


4/4



High Density Metering Enclosure

Specification Description

Overview One or four High Density MeterEnclosure with ION6200meters; ideal for outdoor as well

as indoor applications at allvoltage levels including 600Vdelta and 347/600V wyesystems

Meter Series ION6200

Voltage 12, 4T*

Phasing 3

Enclosure Size 1 or 4

# Meters 1 to 4**

Enclosure Rating R*** or 1

*Voltage Ordering Notes

12 = 208Y/120V wye; 240V delta

48 = 480Y/277V wye; (PM210/PM750)

4T = with provided 2.5:1 CTP (control power transformer);

480Y/277V wye (6200)

** # Meters Ordering Notes

Please indicate the number of meters to be pre-installed

when placing your order. You may order any number of

meters in the enclosure between one and the maximum

number of meters each enclosure will hold.

***Please enter R as the last digit for Type 3R outdoor on

one or four HDM enclosures with the 6200 series meter.

Synapsense Power Metering Data Sheet

Documents

Transcript of Synapsense Power Metering Data Sheet