Symposiumz Nano Material and Device Modeling Brochure Reg Form

8/7/2019 Symposiumz Nano Material and Device Modeling Brochure Reg Form

1/3

his MBA (EPGP) with focus on Strategy and Operations Management from Indian Instituteof Management, Indore, India. He is also certified for Executive Leadership Program (ELP)

from Joseph M. Katz Business School, University of Pittsburgh, U.S.A. He has over 15 yearsof experience in diverse industries. He started his career as scientist in Bhabha AtomicResearch Centre and was control and instrumentation in-charge of plants in Nuclear Fuel

Complex, Hyderabad. He moved to Bosch in early 2000 and managed software projects forin-vehicle infotainment in Germany and India. Later, he joined Philips/NXP semiconductors

and was leading a technology cluster. For his extraordinary contribution to demonstratesignificant saving and sales opportunity, he won Business Improvement Competition in

Bangalore, India and Hanoi, Vietnam.

Mr. K. Sripadaraja

Mr.K.Sripadaraja is a Sr. Applications Engineer, bigtec Solutions PvtLtd, Bangalore. He obtained his M.Sc degree in Electronic Sciencefrom Bangalore University in 2007. He worked as a Project Assistant in

Indian Institute of Science, Bangalore from September 2007 toOctober 2008. His current responsibilities include Design of smallsignal circuits to integrate with MEMS sensors, MEMS design support

/design optimization, conducting trainings on IntelliSuite softwareand taking part in technical discussions related to fabrication of Smart

Sensors. He has published a paper in International Journal and also presented papers in

conferences.

Organized by

Department of Biomedical Engineering

PSG College of Technology, Coimbatore - 641 004 Website : www.psgtech.edu

PSG College of Technology

CoordinatorDr. A. Kandaswamy

Professor and HeadDepartment of Biomedical Engineering

ONE DAY NATIONAL WORKSHOP

ON

NANOMATERIALS AND

DEVICE MODELING

March 4,

2011

The duly filled in Registration forms along with DD should be sent to :

M.Alagappan, Co-CoordinatorAssistant Professor (Sr.Gr), Department of Biomedical Engineering

PSG College of Technology, Coimbatore 641 004.Phone:+91422 - 2572177 Extn:4664 Fax:+91422 2573833

E-Mail:[email protected], [email protected] Website: www.psgtech.edu

Registration Details

* Industry Participants and R&D Institutions : 1000

* Academicians and Research Scholars : 750

* PG/UG Students : 500

Payment should be made throughDemand Draft, drawn in favour ofBMEA-PSG CTpayable atCoimbatore.

Last date for receipt offilled in Registrationform :26.02.2011


2/3


Department of Biomedical Engineering

About the Workshop

PSG College of Technology established in the year 1951 by the PSG & Sons' Charities

Trust is an AICTE approved autonomous institution affiliated to Anna University,

Coimbatore and is an ISO 9001:2000 certified institution. PSG College of Technology

believes in creating and disseminating knowledge and skills in core and frontier

disciplines through innovative educational programmes, industrial training,

research and consultancy and developing a new cadre of professionals with a high

level of competence, deep sense of social commitment and ethics.

Biomedical Engineering Department was established in the year 2006. It offers an Under

Graduate programme in Biomedical Engineering and a Post Graduate programme in

Nanotechnology. The objectives of the Department are to enable the PG students to

acquire integrated experience in the design and development of MEMS / NEMS devices

and development of Nanomaterials, to offer training on specific topics of interest in the

areas of Nanotechnology and to pay adequate attention to the Indian Conditions, needs

and resources of urban and rural areas while training the students.

The field of Nanomaterials is inspiring major research efforts around the globe with

its endless possibilities.

MEMS is also a promising field in this Century for its potential in making smaller,

lighter and more functional devices at lower cost.

But the major challenge is to understand the fundamentals for the growth of these

fields and their control over the environment. This workshop aims to merge these

two fields to open the scope for new research.

* Smart Nanomaterials : A Quick Tour

* Nanostructured Coatings for Engineering Applications

* MEMS Devices and their influence in Industry

* Introduction to intelliSuite : A Computer Aided Engineering Tool

The objectives of the workshop are to widen our views on the topics such as

Resource Faculty

Dr. John Philip

Dr.John Philip is heading the Smart Materials and RadiationTechnique (SMART) section in Metallurgy and Materials Group of

Indira Gandhi Centre for Atomic Research, Kalpakkam. He obtainedhis Ph.D. from Indian Institute of Technology, Madras in 1992. Beforejoining DAE, he worked for nearly five years as post-doctoral fellow

and visiting faculty at various institutions abroad such as CRPP- CNRS,

France, University of Hull, UK and ESPCI, Paris. He is also a faculty ofHomi Bhabha National Institute. He has received several awards suchas Science and Technology Excellence award of DAE (2006), INSmedal (2007) of Indian Nuclear Society, ISNT NDT National award (2009) and MRSI medal

(2011). He is recipient of many international fellowships which include Monbusho(Japan), CIES (France), Switzerland Research Fellowship. He has executed an Indo-French

project on nano-emulsion during 2000-2003. He is a recipient of perspective researchgrant of BRNS on development of advanced nanofluids. He has six patents in his creditand over 75 publications in leading refereed international journals and 60 conference

papers. He has delivered more than 35 invited lectures in India and abroad. Media hashighlighted his work on several occasions. He is a reviewer of several international

journals and research funding agencies in India and abroad. The research activities ofDr.Philip are in the broad area of smart nanomaterials, nanofluids, soft-matter, NDT,

thermal imaging and radiography.

Dr. R. Ramaseshan

Dr.R.Ramaseshan is an Assistant Professor at Homi Bhabha NationalInstitute, Indira Gandhi Centre for Atomic Research, Kalpakkam. Heobtained his Ph.D. from Indian Institute of Technology, Madras in

1998. He is also a part of Thin Films & Coatings Section, Surface &Nano Science Division and Materials Science Group at IGCAR,Kalpakkam. He was a Visiting Scientist in IGCAR from 2006 to 2007.He

served as a Visiting Faculty at Osaka University, Japan from 2002 to2006. He was a Specialty Engineer at Kawasaki Heavy Industries Ltd,

Akashi, Japan from 1998 to 2002. He also held a position of Research Associate inDepartment of Materials Science, Osaka Prefecture University, Japan from 1996 to 1998.He is a member of Japan Society of Powder and Powder Metallurgy, Indian Institute of

Metals and a Life Member of Indian Physics Association. He has several InternationalPublications and his current research area are Monolithic and Multilayer Thin films

Synthesis using Magentron sput tering technique, Nanomechanical characterization ofthin films and wear resistance analysis of thin f ilms.

Mr. Pranava Tripathi

Mr. Pranava Tripathi is leading Software Development Centre for Bosch

Sensortec in RBEI Coimbatore. His responsibility includes developmentand delivery of SW to demonstrate and use capability of various MEMSproducts by Bosch Sensortec. He graduated in Electronics Engineering

from Kamala Nehru Institute of Technology, U.P. India. He is a Microsoft

Certified Professional (MCP) for Software solution development. He did


3/3

Name of the participant/s : ............................

............................

............................

Designation : ............................

Qualification : ............................

Organization : ............................

............................

Address for Correspondence : ............................

............................

............................

Phone : .......................................................

Email : ........................................................

Details of Registration Fee : DD for ...............................................

with number ...........of.. (bank)

dated

(If students, forward through the Head of the Department)

Signature of the HoD Signature of the Participant/s

ONE DAY NATIONAL WORKSHOP ON

NANOMATERIALS AND

DEVICE MODELING

March 4, 2011


Symposiumz Nano Material and Device Modeling Brochure Reg Form

Documents

Transcript of Symposiumz Nano Material and Device Modeling Brochure Reg Form