SWING ARM MAGNIFYING LAMPMODEL No: SAM 100

Part No: 5460530

OPERATING & MAINTENANCEINSTRUCTIONS

LS0514

2

Thank you for purchasing your new CLARKEswing arm magnifying lamp.

Before using this product, read this leafletthoroughly, and follow the instructionscarefully, you can then look forward to itgiving long and reliable service.

GUARANTEE

This CLARKE product is guaranteed againstfaulty manufacture for a period of 12months from the date of purchase. Yourreceipt is required as proof of purchase.This guarantee is invalid if the product isfound to have been abused, or tamperedwith in any way, or not used for thepurpose for which it was intended.

Faulty goods should be returned to theirplace of purchase, no product can bereturned to us without prior permission. Thisguarantee in no way effects your statutoryrights

ENVIRONMENTAL RECYCLINGPOLICY

Through purchase of this product, thecustomer is taking on the obligation todeal with the WEEE in accordance with theWEEE regulations in relation to thetreatment, recycling & recovery andenvironmentally sound disposal of theWEEE.

In effect, this means that this product must not bedisposed of with general household waste. It mustbe disposed of according to the laws governingWaste Electrical and Electronic Equipment(WEEE) at a recognised disposal facility.

ELECTRICAL CONNECTIONS

This product is supplied with a 13 amp, BS1363 plug, for connection to a domestic240 Volt (50Hz) electrical supply. Should itbe necessary to renew the plug at anytime, ensure the replacement is of identicalspecification.

IMPORTANT: The wires in the mains lead arecoloured in accordance with the followingcode:

Green & Yellow -Earth, Blue - Neutral

Brown - Live

As the colours of the flexible cord of thisappliance may not correspond with thecoloured markings identifying terminals inyour plug proceed as follows:

Connect GREEN & YELLOWcable to terminal marked with aletter “E” or Earth symbol “ ”or coloured GREEN or GREEN &YELLOW.

Connect BROWN cable toterminal marked with a letter “L”or coloured RED.

Connect BLUE cable to terminalmarked with a letter “N” orcoloured BLACK.

In the event that this product is fitted with aplug which is moulded onto the electriccable (i.e.. non-rewirable) please note:

1. The plug must be thrown away if it is cutfrom the electric cable. There is adanger of electric shock if it is theninserted into a socket outlet.

2. Never use the plug without the fusecover fitted.

3. Should you wish to replace adetachable fuse carrier, ensure that thecorrect replacement is used (asindicated by marking or colour code).

4. Replacement fuse covers can beobtained from your local dealer ormost electrical stockists. 5. If the mainscable becomes frayed or damaged inany way, do not use the lamp until ithas been replaced. Contact your localdealer for a replacement part.

Fuse Rating. The fuse in the plug is 3 amps,and must be replaced with one of thesame rating and ASTA approved to BS1362.

3

ASSEMBLY AND OPERATION

Your magnifying lamp is in two parts, thelamp with adjustable arms, and the clampassembly (item 7), which comprises a “g”clamp on to which is mounted a holder foraccommodating the spigot on theunderside of the lamp base. The holdermay be rotated by up to 180°, by slacken-ing the knob (item 11), and re-tighteningwhere required. This allows the lamp to beupright, with the “g” clamp mounted onsurfaces at varying angles up to thevertical.

SETTING UPThe lamp is designed so that it will remainstable in any desired position. Wheninstalling your lamp, first slacken off thepivot pinch bolts, using the large adjusterknobs (item 6), to allow the arms to movefreely. Tighten the pinch bolts so that theyare firm, but do not over tighten. When thepivots are correctly tightened, the lampshould be capable of maintaining stabilityin any position, without the need forreadjustment.

MAINTENANCEThe unit requires little maintenance, and is limitedto changing the tube when necessary, andcleaning the lens.

Liquid glass cleaner may be used to clean the lens,used sparingly and with a soft dry cloth. Do notwet the tube or electrical connections.

To change the tube, slacken off two of the tubes’spring retaining clips (item 13), allowing the tube tobe withdrawn. Pull off the 4 pin plug, and connectit on the new tube. Place the tube on its seating,ensuring the wires connected to the plug arepushed back behind the tube shield. They shouldnot be allowed to hang free, alongside or restingagainst the tube. Be careful not to force the plugas the pins are offset to prevent the plug frombeing connected at 90° to its’ correct position.Finally, retighten the spring retaining clip screws.Replacement tube - domestic florescent, 22 watt210 o/d.

IMPORTANT: You should always switch the lampOFF, and unplug from the mains beforechanging the tube or cleaning the lens.

PARTS LIST & DIAGRAM

Item Description Part No.

1 Cover SAM 10001

2 Lens 5" SAM 10002

3 Tube 5460535

4 Switch Assembly SAM 10003

5 Transformer SAM 10004

6 Adjuster Knob N/A

7 ‘G’ Clamp SAM 10007

8 Stand SAM 10008

9 Base SAM 10009

10 Transformer Cover SAM 10010

11 Clamp Screw Knob N/A

12 Spring N/A