SWASTIK ’S SHRINK WRAPPING MACHINE (TUNNEL)....SWASTIK ’S SHRINK WRAPPING MACHINE (TUNNEL)....
Transcript of SWASTIK ’S SHRINK WRAPPING MACHINE (TUNNEL)....SWASTIK ’S SHRINK WRAPPING MACHINE (TUNNEL)....
SWASTIK’S SHRINK WRAPPING MACHINE (TUNNEL).
Machine Operation :-
Place the bottle with the printed sleeve inserted on it, on the roller of the machine. This roller will take the bottle inside theshrink wrapping tunnel. Here the label/ sleeve will be shrink wrapped to the bottle by using the heating principle. After
which the bottle will out of the machine from the other side.
Salient Features :-
• Specially designed S.S. tubular finned heaters for minimum power consumption and maximum heat transfer.
• Heavy duty turbo blower for effective and efficient hot air circulation.
• Class insulation provided with glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubingfor conveyor rods.
• Over backed heat resistant power coated used.
• Lading and cooling zone provided as standard feature as outlet.
• Heavy duty D.C. motor provide with gearbox and controller for heavy load conveyor.
• Stainless steel conveyor roller with silicone coated.
• Auto temperature control.
• Full heavy duty power coated tunnel covers and electric panel board.
TECHNICAL SPECIFICATION:-
MODELS SRK/200/DX SRK/300/DX SRK/450/DX SRK/600/DX
TUNNEL DIM W X HX L (mm)
220 x 160 x 180 325 x 300 x 800 475 x 350 x 1000 625 x 475 x 1100
MACHINE DIM W x Hx L(mm)
475 x 1200 x 1300 575 x 1500 x 1800 750 x 1600 x 2000 800 x 1600 x 2500
POWER FORHEATERS
4KW/220V/440V 7KW/440V 9KW/440V 1KW/440V
POWER CON. MOTOR 1/8 HP DC 220V 0.25 HP DC 220 V 0.5 HP DC 220 V 0.5 HP DC 220 V
SPEED OF THECONVEYOR
Variable by A.C.control
Variable by A.C.control
Variable by A.C.control
Variable by A.C.control
TEMPERATURE 80-250 C 80-250 C 80-250 80-300
NOTE :- THE MEASURE DIFFERENCE FOR ECONOMIC MODEL ARE :-• CONVEYOR SPEED : 3 SPEED BY STEP PULLEY.
• WITHOUT COOLING ZONE.
• THIS MACHINE IS CONSTRUCTED WITH SILICONE COATED ROLLERS, IF TEFFLON MASH MATERIAL ISREQUIRED, IT WILL COST EXTRA.
SWASTIK TECHNOPACK Pvt. Ltd., MUMBAI, INDIA, Tel: - +91-22-6692 4906/07, 2847 6631. Email: - [email protected]
TECHNICAL SPECIFICATION:- SRK/1000
MODELS SRK/1000/DX
TUNNEL DIM W X H X L (mm) 1000 x 200 x 1500
MACHINE DIM W x H x L(mm) 1500 x 1500 x 3500
POWER FOR HEATERS 14KW/220V/440V
POWER CON. MOTOR 1 HP AC 220V
SPEED OF THE CONVEYOR1-4 MTR/MINVariable by A.C. frequency drive
SPEED OF BLOWER MOTOR VARIABLE BY AC FREQUENCY CONTROL
COOLING ZONE AREA 1500 W X 700 L
TEMPERATURE 80-300 C
SWASTIK TECHNOPACK Pvt. Ltd., MUMBAI, INDIA, Tel: - +91-22-6692 4906/07, 2847 6631. Email: - [email protected]
2
SWASTIK TECHNOPACK P. Ltd., MUMBAI, INDIA. Email :- [email protected]
3