2 Surrey Place, Toronto, ON M5S 2C2 / T: 416-925-5141 / F: 416-925-5645 / W: www.surreyplace.on.ca

Surrey Place Centre is Accredited with Accreditation Canada and Achieved Exemplary Standing 2012 - 2016

Application Guidelines

Request for Proposals (RFP)

To complete construction for Surrey Place Centre’s Administrative Office

Issued: January 19, 2018

Application Deadline: February 2, 2018

Please Direct Submissions to: Edwin Cui

Financial Analyst and Procurement Officer Surrey Place Centre

2 Surrey Place Toronto, ON M5S 2C2

edwin.cui@surreyplace.on.ca

Living Your Potential – All Your Life! Enabling full participation for people with developmental disabilities.

Surrey Place Centre

Centre Surrey Place

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 2 of 15

Contents

1. Background

2. Overview

3. Project Details

4. Evaluation Criteria

5. Proposal Contents and Format

6. Terms and Conditions

7. Key Dates and Contact Information

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 3 of 15

1. Background This Request for Proposals (RFP) is issued by Surrey Place Centre (SPC) for the purpose of completing

construction for our new Administrative Office located at 777 Bay St.

SPC’s mission is to help people of all ages with developmental disabilities and autism spectrum disorder to lead

healthy and socially inclusive lives using our exemplary skills in interdisciplinary clinical services, education and

research. Our vision is “Living Your Potential – All Your Life!”

With a compassionate commitment to improving the lives of people with developmental disabilities and autism

spectrum disorder and their families, we believe in:

Collaboration. We succeed by working together with our clients, families and community and government

partners.

Accountability. We do what we say we will do and deliver the best possible results for the people we serve.

Innovation. We develop new ideas and approaches to share with the world.

Respect. We seek to understand before being understood and accept differences in a professional and

caring manner.

Responsiveness. We respond to the needs of our clients and partners promptly with excellence.

Our 2015-2020 strategic directions are:

Strengthening Our Capacity. We will strategically invest in our people and infrastructure to provide the

highest standards of service for our clients and their families.

Bridging the Gaps in the System. We will improve the quality and efficiency of developmental services

locally and provincially by strengthening and expanding our collaboration with the health system.

Building Upon and Leveraging Our Life-Span Model. We will expand and share our interdisciplinary

expertise for all ages with our community partners and improve our best practices through research and

education for the benefit of our clients throughout their life-span.

Shaping the Future. We will partner with government to enhance the provincial system of services and play

a role in influencing government policy related to developmental, autism spectrum disorder and health

services.

Building a Centre of Excellence. We will enhance our profile and overall effectiveness by focusing on quality

of care, applying best practices, creating and sharing knowledge and promoting innovations provincially,

nationally and internationally.

SPC offers a variety of groups and workshops for clients, families and caregivers, as well as extensive education

and consultation services to community agencies. Our comprehensive programs and services range from

assessment, diagnosis, and one-on-one treatment, to family counselling and group support and is provided by a

broad network of clinicians and professionals.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 4 of 15

SPC is affiliated with the University of Toronto and other academic institutions and is a teaching site for students

in a variety of health care professions.

SPC is accredited by Accreditation Canada (2016-2020).

SPC has approximately 400 employees located at 13 sites in the Greater Toronto Area. For additional information on SPC, please refer to:

SPC’s most recent Annual Report Website Link To Annual Report

SPC’s most recent Audited Financial Statements Website Link To Audited Financial Statements

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 5 of 15

2. Overview

Surrey Place Centre’s Administrative Office has been located at their current location (180 Dundas, Toronto) since February 2012. Although this site was initially suitable, a number of factors have necessitated the consideration of alternative option, in an effort to improve our clinical and administrative collaboration and efficiency.

After careful evaluation, SPC determined that 777 Bay St. is the most appropriate site to meet the needs of current and potential future programs and services. Staff will be relocated from 180 Dundas to 777 Bay in April 2018. We will occupy a suite on the 27th floor of 777 Bay St, which is approximately 350 meters or a 4-minute walk, from our central location at 2 Surrey Place.

This relocation has necessitated the need renovate the existing space to match our required office layout.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 6 of 15

3. Project Details The following pages detail the needs of the project, including construction specification:

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

SURREY PLACE CENTRE RENOVATION

777 BAY STREET, TORONT0 1 ONT ARIO

onespace

one team . one vision.

NO. DATE REVISIONS C • -J1\XX2D1' C-,E:< SET ...

0 ,,, TFlflFR

1. /U1:.1/.CH <H f--'f-f-?HII

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

COVER PAGE

=:.\T[

17079 Jrn· 19, 2C· b

='LO-TED Jt.JE

NTS Jar 19, 2c, b

1000

ONTARIO BUILDING CODE DATA MATRIX, PART 3

O.B.C. MATRIX

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

Item

J

•I

6

8

9

1C

1

14

13

17

10

19

ONESPACE UNLIMITED Cerlili,:.;,Jl_c er :.m.1,:.;.i:.;;:; ijLCJ9

.?17(:<J ·:;tcclcs .::.,vc, SL..itc 3CS V:..1L..g·1:..ir·, C · .. :..ir·o I LI P.K8 Tel ;,11::;1-8 118-12 1 :5 -,JX ::111:;::,-wc-12;5 er·::: ii iceo::,:;;orie::cpo::::eu 11·nTe:::: .com lh:: Ctr_ilicul;; cl [)rUC~v "Ur'lJC' of he, fiol::::er j:,; .·1;; ·101,:Jc:r'::; L_<:__:LJl'--J

NAME OF PROJECT SLRff' Fl/,Y crnTFE

LOCATION: 7T7 F/',.Y SPF=-T. TC~C~ -o

Ontario's 2006 Building Code Data Matrix Part 3 or 9

The Arch·~cd r:1-2d ab::Nc "OS cx:r~·sd ·c3pcns b c :c:1:rol v,'\h -~srec :o rl~si9n u:ti·,Yes

lhe Archi:ect', seal ".,r--:,~' is 1°e Arcl-ite:t's -l'.:lm

OBC Reference c;:efe"enc~s -Jre ~c Cvis·c-1 E unless rct~c -Al lor D vis·o·, A c- -Cl r~,r Civ cicr· C

l"roje:::t Je:::cripticr • lb:, D =-cl 1· • F::::rl 3 =:J Per, D

n i\dcitio-1 ', I to I' ,.1 - .I 7. l'_ 1.1.7 l;J Ii ".IC.' ,1 _J Ch,:.mst: or l_h:t LJ /, .trnl_.,:n

c~:C._JP J, ::::ny 12 g1~, en;: ::ireo

EL.ild'1J Are::: Ci'; [,:i:;;cir(j ::,)4.0t 4.IJ [A] (~rncvdrd Arc:-: :::1nly)

,,.,rcss ,iJ-rcc Exis~irg _."''!?"4:c.~?"'~-------(_~eri,:.; 1cleJ ,\re,:.; ::::T1ly)

4.12. [A] '4.1.L -,]

Jc; uw Gr::::ce -"~-- I Li - 'J & ,., ·1 1.L,',_),l<,_ ,,, 1.·1, -,.1.1 ' ' ,LA ' ,L, ' ' -

3.2.2.i...9

Spr'r .::Is~ Sys~en D'.ISTll\G

3.2.2.2:) 3.3.

-5.>' _f:;::i tu. 3.2.1.,~. j_'. J /. l[\[: 1 [Y

::l.1 ()_;z,:;

], 1Ci.2

SJ 1U.t.f

_J

' _J

sclcctccl tk,or :::rcas

bnserrtr LJ ir l'e.J nf '10f rniin]

• Yes n [\O

• Ye~ LJ l\u

• Yee; D l\o

• Yes I I [\o

Co1s~r.Jcfon R2s~.r"ct.icrs - CoTJJstib e

per"1 .. ec PP'"i° .. td A.:J1.nl Ccr:,-n.ctic-r, - CoTJJstib c • l\o 1-comb~st'b c

Rec1_,'rr;d

I i'e

Rcs'darcc

l~:..il.i·1;1

(f kk)

\:l·l-1

Sc-:i.lh

Arce of =[3- ''.1

r·-J//l. [,J/A

• buil :1r

f-w /c,nlo Asserd:, ic,;: I ·slPd

FRR h-:Jur·s '.1 or Je:::::::ii-'ot'v1

lows ;

?cc:f ln1n::

\.1euur·i·1;; _I __ luur:::

-~:I\ o· Sq1:~c·r "in:

\1eT:::2'3

=-1ows _ _., __ -fours

~I -bur'.:

--fours

N_/,\ _, [, /f---or

1/L l"crnittcd ''cp--1-:::c %

' -,,m)

I\/A

1--JA \J/A

I\/.A \J_:i_,\

\fox. 1~ ot .., '.Jpe·1in,;is :Jpe-1·r1q:,

t~ /::.. r·-1 / F.

1,J/.::.,

l·~/.t--.

(·!//l.

l·J/P..

l\,/.A

f-><IS 1-._,:;

Fx1c;-I\C;

FRF

i2.J

~,.//

3.2.C

n ::lr.:.:th J./.?.?:J-3~,.

n Jeth

j_L_1 , /J:: ::en J.1 1 /.

g rn_ rn ··J/A

\J/,'\

9 1 Ci.2.

9 1 Ci.·1 ..

J,J.1.J

3.,5. S.5.7.

:LU?. ?,r l.:':.I.'?'.. ·; 1C.1.s(-'}

j_L__j

Li~:~cc ~es·::::n o· C,c;::;c;i :;lio·1

r~/A. l~/A.

(~/;\

l~/A.

Co-1:::· Co···st

\J/,t.,

'} 1 J.~,, ':l I~)-~

'.::om:::. Cv1~:~r rfo-1::::.

:::lud::::iric

~J/i'-,

r-~/A

l--kr-:=::Jr1b Cc-··st,-.

N/.t...

I~/.::..

1·~/.'\

N/.::..

CJ CJ 1 ,-,. ,--, ,-,

(_) :,_,i L '' '"'· ( ', ,' I I I \. _) \ .. ,/

/-, ~, 1 ' I , '·j /

/ / ", I

I I I I \_ J \. j

P,,,,

/', ' I / I I

'/' I \' \ I ,, \I

s' \I

KEY PLAN SCALE: N.T.S

LI -F,, - <

L::: ~( /i\ \./\/ I ~\J (~ G[l\l[~:AL c; ~ 1•J - ~~ i"", I

E::; / \ / \ --

r.-.· F \ 7

I, ,, I (.· \ I I - -...._',

\ \ . ./ , __ _)

1) F ]\/IC) I Tl C) I'~ F: -< Tl Tl c: 1•J I\

" /--'\ 1 ··-~1 \ I T IJ ~, 1

F~EFL-C:T-[: I

-- ,·,, ,, 'LI -' I I \ /\ .' \_J V '/ - L1'1 \

:=E LI \I(~ (_~ (_) \;I ]\./ l._j

\/\/ /\ V '/ i--',

~ '.' •, ( ·.· ~· I I ' .' - \ __ / \....,/ \

Fl I\I Ir:;~ ~ I\I F I\I ~;~

F I I\J T=-F< IC) F-z

-L _:ETA,I ,L, -I ::; ]\I

\ \

I\/ I ]\/ I

,,\!("\~', / \/\/' , / /,_ ',' 1/ \_ / \ \.,

[)-T L'.[; 1)-TA IC'

[ ~: (--\I /-'-) =) _, \ __ ) \_,/ \ /\ I\I j

l\!I /',, X

I\~ I

,-. (~. ~ '----.... I,

s.._) \__/

_/ \,j

)L:\\~

[) -\ ( \ I I I-(' \_/ \____,' \

-,/ \ E [)ET IL'.[;

onespace

one team . one vision.

NO, DATE REVISIONS -J1\XX2D1'

?,Jlii.C' .17 0 ,,, TFlflFR

1 ' /U1 _:_1/ CH

NO_ DATE ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE !>ND THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE Of WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

All. CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

DRAWING LIST KEY PLAN OBC MATRIX

17079

NTS

=:.t-.T[ Jrn· 19, 2C·'t,

='LO-TED Jt-JE

Jar 19, 2C,'b

1001

PROJECT GENERAL SPECIFICATIONS

1. DRAWINGS, PERMITS, LICENSE AND REGULATIONS

1.1 READ INTERIOR CONSULTANT'S DRAWINGS AND SPECIFICATIONS IN CONJUNCTION WITH ALLOTHER CONSULTANT'S DRAWINGS IN THIS CONTRACT.

1.2 ANY DISAGREEMENTS, CONFLICTS AND DISCREPANCIES BETWEEN THE CONSULTANT'SDOCUMENTS SHALL BE REPORTED TO DIALOG UPON DISCOVERY OF SUCH FORCLARIFICATIONS AND INTERPRETATION PRIOR TO PROCEEDING WITH THE WORK.

1.3 CONFORM TO THE ONTARIO BUILDING CODE, LATEST EDITION, INCLUDING ALL IT'SAMENDMENTS AND REVISIONS, OTHER LAWS AND REGULATION HAVING JURISDICTIONS OVERTHE PROJECT.

1.4 PAY ROYALTIES AND LICENSE FEES AND INDEMNIFY AND SAVE THE OWNER HARMLESS FROMAND AGAINST ANY OF ALL LOSSES, COSTS (INCLUDING ALL LEGAL FEES ), CHARGES,DAMAGES, CLAIMS AND DEMANDS WHICH MAY ARISE BY REASON OF THE WORK IN THISCONTRACT.

1.5 OBSERVE AND ENFORCE ALL CONSTRUCTION SAFETY MEASURES AS REQUIRED BY THE FEDERAL,PROVINCIAL AND MUNICIPAL AUTHORITIES. COMPLY WITH MOST STRINGENT REQUIREMENTS IFDISCREPANCIES OCCUR. COORDINATE AND PERFORM ALL TESTS REQUIRED BY THEAUTHORITIES HAVING JURISDICTION REGARDING THE INSTALLATION AND INSPECTION OFWORK.

1.6 DRAWINGS ARE INTENDED TO CONVEY SCOPE OF THE WORK AND INDICATE GENERAL ANDAPPROXIMATE LOCATIONS, ARRANGEMENTS AND SIZE OF ITEMS AND EQUIPMENTS.CONTRACTOR TO VERIFY SITE EXISTING CONDITIONS OF THE SITE PRIOR TO PROCEEDING WITHTHE WORK.

1.7 COMPLY WITH ALL REQUIREMENTS, RULES AND REGULATIONS OF THE LANDLORD OR BUILDINGMANAGEMENT.

2. PROJECT COORDINATION BY THE CONTRACTOR ( BUT NOT LIMITED TO )

2.1 CO-ORDINATE, ADMINISTER AND SUPERVISE THE WORK. ENSURE ALL SUBCONTRACTORSEXAMINE ALL DRAWINGS AND SPECIFICATIONS AND ARE FAMILIAR WITH THE WORK OF OTHERWORK IN THIS CONTRACT

2.2 PERFORM WORK AS NECESSARY TO COMPLETE WORK IN ACCORDANCE WITH PROJECTSCHEDULE.

2.3 PROVIDE FORMS, TEMPLATES, ANCHORS, SLEEVES, INSERTS, AND ACCESSORIES REQUIRED TOBE FIXED OR INSERTED INTO WORK.

2.4 DIRECT ANY QUESTIONS, COORDINATION AND REFERENCES TO THE LANDLORD AND/ORBUILDING MANAGEMENT OR ANY OTHER REPRESENTATIVES NAMED BY THE LANDLORD ORBUILDING MANAGEMENT.

2.5 THE CONTRACTOR SHALL CONFIRM HIS APPARATUS, THE STORAGE OF PRODUCTS, AND THEOPERATIONS OF HIS EMPLOYEES TO LIMITS INDICATED BY LAWS, ORDINANCES, PERMITS ANDTHE CONTRACT DOCUMENTS AND SHALL NOT UNREASONABLY ENCUMBER THE PREMISEWITH HIS PRODUCTS.

2.6 THE CONTRACTOR SHALL NOT LOAD OR PERMIT TO BE LOADED ANY PART OF THE WORK WITHA WEIGHT OR FORCE THAT WILL ENDANGER SAFETY.

2.7 ARRANGE AND CHAIR REGULAR SITE MEETINGS OF PARTIES CONCERNED WITH PROGRESS OFPROJECT AT THE TIME OF MEETINGS. RECORD THE MINUTES OF THE EACH MEETING,ATTENDANCE AND DISTRIBUTE COPIES TO ALL PARTIES INVOLVED WITHIN 72 HOURS.

2.8 REPORT ANY PROBLEMS OR DELAYS RELATING TO THE WORK.

2.9 REQUEST ADDITIONAL INFORMATION REQUIRED TO PROPERLY COMPLETE THE WORK. ALLREQUEST FOR INFORMATION SHALL BE IN WRITING AND FORWARDED TO DIALOG.

2.10 COORDINATE AND ARRANGE FOR SHIPPING, RECEIVING, ELEVATOR USE AND SECURITYREQUIREMENT WITH LANDLORD OR BUILDING MANAGEMENT.

2.11 MAINTAIN ALL OPERATIONAL BUILDING SERVICES. SHUT DOWN OF SERVICES SHALL ONLY TAKEPLACE AS AUTHORIZED BY LANDLORD

3. EXAMINATION AND FIELD MEASUREMENTS AND SITE CONDITIONS

3.1 EXAMINE SITE OF SURFACES, STRUCTURES AND WORK UNDERLYING OR ADJACENT TO THEWORK TO BE PERFORMED. REPORT ANY FORESEEABLE INTERFERENCE AND/OR DIFFICULTIES TOPERFORM THE WORK IN THIS CONTRACT.

3.2 TAKE FIELD MEASUREMENTS RELATIVE TO WORK. FABRICATE AND ERECT WORK TO SUIT FIELDDIMENSIONS AND FIELD CONDITIONS. REPORT ANY DISCREPANCIES TO CONSULTANTS ATONCE. REPORT TO THE CONSULTANT IF THE FLOOR LEVEL VARIES MORE THAN 1/4" OVER 10'.

3.3 COMMENCEMENT OF WORK IMPLIES ACCEPTANCE OF THE EXISTING CONDITIONS ANDNO EXTRA CLAIMS BASED ON THESE CONDITIONS WILL BE PERMITTED.

3.4 OBTAIN MORE ACCURATE INFORMATION ABOUT LOCATIONS, ARRANGEMENT AND SIZES FROMTHE SITE AFTER CAREFUL STUDY AND COORDINATION OF DRAWINGS, SHOP DRAWINGS,INCLUDING PERTINENT ARCHITECTURAL, MECHANICAL, STRUCTURAL AND ELECTRICAL ANDBECOME FAMILIAR WITH CONDITIONS AND SPACES AFFECTING THESE MATTERS BEFOREPROCEEDING WITH THE WORK WHERE JOB CONDITIONS REQUIRE REASONABLE CHANGES ININDICATED LOCATIONS. MAKE CHANGES AT NO COST TO OWNER.

3.5 ENSURE THAT EQUIPMENT AND SHOP FABRICATED FITMENTS ARE IN UNITS OF PRACTICAL SIZEAND WEIGHT FOR TRANSPORTATION IN AND THROUGH THE BUILDING TO THE FINAL LOCATIONOF INSTALLATION WITHOUT ALTERATIONS OR DAMAGE TO THE BUILDING (INCLUDING FREIGHTELEVATOR).

4. SUBMITTALS

4.1 SUBMIT CONSTRUCTION SCHEDULE FOR THE WORK AS REQUESTED BY THE CONSULTANT OR BIDSUMMARY. INDICATE PHASING, MILESTONE DATES, RELATED ACTIVITIES, CRITICAL PATH ITEMSAND COMPLETION DATES ETC. 72 HOURS AFTER CONTRACT AWARD

4.2 UP-DATE SCHEDULE REGULARLY AND DISTRIBUTE TO ALL CONCERNED.

4.3 SUBMIT THE FOLLOWING SUBMITTALS INCLUDING, BUT NOT LIMITED TO, SCHEDULES,SAMPLES, PAINT DRAW DOWNS, ALL CUSTOM MILLWORK SHOP DRAWINGS, MOCK-UPS ANDWARRANTIES MUST BE SUBMITTED IN A TIMELY MANNER TO ALLOW FOR THE CONSULTANTS'REVIEW, SO AS NOT TO DELAY CONSTRUCTION PROGRESS. BE RESPONSIBLE FOR DELAYSRESULTING FROM LATE SUBMITTAL SUBMISSIONS.

4.4 CONTRACTOR TO REVIEW ALL SUBMITTALS PRIOR TO SUBMISSION TO THE CONSULTANTS ANDBE RESPONSIBLE FOR DIMENSIONS TO BE CONFIRMED AND CORRELATED AT THE JOB SITE FORINFORMATION THAT PERTAINS SOLELY TO FABRICATION PROCESS OR TO TECHNIQUES OFCONSTRUCTION AND INSTALLATION AND FOR THE COORDINATION OF WORK OF OTHERSECTIONS.

4.5 ALL SHOP DRAWINGS ARE IN THE SAME UNITS OF MEASUREMENT AS THE CONSULTANTSDRAWINGS AND SPECIFICATIONS. SHOP DRAWINGS PREPARED IN DIFFERENT UNITS WILL BEREJECTED WITHOUT REVIEW FOR RESUBMISSION. ANY DELAYS RESULTING FROM THERESUBMISSION SHALL BE SOLE RESPONSIBILITY OF THE CONTRACTOR.

4.6 CONTRACTOR TO BE RESPONSIBLE FOR THE PROPER NUMBER OF SHOP DRAWINGSRESUBMITTED AND APPROVAL OBTAINED FROM ALL AUTHORITIES HAVING JURISDICTION,WHICH REQUIRE THEM.

4.7 COMMENCE WORK RELATED ONLY TO RETURNED SHOP DRAWINGS MARKED "REVIEWED" OR "REVIEWED AS NOTED" UPON RECEIPT. DO NOT COMMENCE WORK RELATED TO THOSEMARKED " REVISE AND RESUBMIT" UNTIL SUCH SHOP DRAWINGS HAVE BEEN REVISED TO SHOWCORRECTIONS, RESUBMITTED AND RECEIVED BACK MARKED " REVIEWED" OR "REVIEWED ASNOTED".

4.8 SUBMIT 3 COPIES OF SUBMITTALS. TWO OF WHICH WILL BE RETURNED BACK TO CONTRACTORAFTER REVIEW. CONSULT WITH DESIGNER FOR SUBMISSION OF ELECTRONIC COPIES IN LIEU OFHARDCOPY.

4.9 MINIMUM SIZES OF SAMPLE SUBMITTALS ARE AS FOLLOWS :· TILES AND CARPET TILES: ACTUAL UNIT SIZE AS

MANUFACTURED· PAINTS DRAW DOWNS: 8 1/2" x 11"· SOLID WOOD SAMPLES: 6" X 6" MINIMUM THICKNESS OF

3/4"· WOOD VENEER: 12" X 12" C/W JOINT SEAM, ON BACKING

MATERIAL

· HARDWARE: ACTUAL UNIT SIZE AS MANUFACTURED OR CUTSHEET

· WOOD STAIN SAMPLE: 6" X 6" X MIN. 1/4" THK.· GLASS OR MIRROR: 6" X 6" IN SPECIFIED

THICKNESS· OTHERS ITEMS: PRACTICAL SIZE AS REQUESTED BY

CONSULTANT

4.10 WHERE SAMPLES ARE SPECIFIED, SUBMIT SAME AND OBTAIN APPROVAL PRIOR TO ORDERINGOR COMMENCING FABRICATION OF WORK. REFER TO DRAWINGS FOR SUBMITTALREQUIREMENTS

4.11 ALL SAMPLES BECOME THE PROPERTY OF THE OWNER.

4.12 PREPARE AND SUBMIT TO THE CONSULTANT A DETAILED, COMPREHENSIVE SCHEDULEINDICATING CRITICAL DATES OF WORK, DELIVERIES, ETC. SUBMIT THIS SCHEDULE IMMEDIATELYAFTER AWARD OF CONTRACT. CHANGES TO THE WORK SHALL NOT PROCEED WITHOUT WRITTENDIRECTION FROM THE CONSULTANTS, QUOTATIONS SHALL BE SUBMITTED IN A TIMELY MANNER COMPLETE WITH ALL COSTS FOR MATERIAL, LABOUR AND ANY DELAY TO THE CONSTRUCTIONSCHEDULE.

5. CUTTING, CORING AND PATCHING

5.1 INSPECT EXISTING CONDITIONS, INCLUDING ELEMENTS SUBJECT TO MOVEMENT OR DAMAGEDURING CUTTING AND PATCHING. AFTER UNCOVERING THE WORK, INSPECT CONDITIONSAFFECTING INSTALLATION OF NEW WORK.

5.2 ANY ALTERATION BY MEANS OF CUTTING, DRILLING, CORING OR OTHERWISE TO STRUCTURALCOLUMNS, FLOORS, WALLS OR ROOF ARE NOT PERMITTED WITHOUT PRIOR WRITTENPERMISSION BY LANDLORD AND REQUIRE REVIEW BY BASE BUILDING STRUCTURAL ENGINEER.CUTTING AND CORING OF REINFORCED CONCRETE STRUCTURE MAY NOT PROCEED WITHOUTX-RAYING OR SCANNING BY A QUALIFIED CONTRACTOR. SUBMIT COPIES OF THE SUCHINVESTIGATIVE MEASURES TO CONSULTANT PRIOR TO EXECUTION OF THE CUTTING, CORINGOR DRILLING.

5.3 IF UNCOVERED CONDITIONS ARE NOT AS ANTICIPATED, IMMEDIATELY NOTIFY THECONSULTANT AND SECURE NEEDED DIRECTION. DO NOT PROCEED UNTIL UNSATISFACTORYCONDITIONS ARE CORRECTED.

5.4 PATCH AND REPAIR ALL DAMAGED OR REMOVED FIREPROOFING IN THE PERFORMANCE OFTHE WORK. FIRE RESISTANCE RATING TO MATCH EXISTING.

5.5 SEAL ALL OPENINGS IN FIRE SEPARATION WITH A ULC APPROVED SYSTEM.

5.6 PROVIDE REQUIRED PROTECTION, INCLUDING, BUT NOT NECESSARILY LIMITED TO, SHORING,BRACING AND SUPPORT TO MAINTAIN STRUCTURAL INTEGRITY OF THE WORK.

6. SETTING OUT

6.1 LAYOUT ALL PARTITIONS AND DOORS (CHALKLINE). NOTIFY THE CONSULTANT AT ONCESHOULD ANY PROBLEMS IN LAYING OUT ARISE FROM THE SITE CONDITIONS OR OTHER CAUSES.OBTAIN CONSULTANT'S APPROVAL FOR ANY DEVIATIONS PRIOR TO CONTINUING WITH THEWORK.

6.2 PRIOR TO COMPLETION OF THE LAYOUT, SCHEDULE AND NOTIFY CONSULTANT OF THEANTICIPATED DATE FOR REVIEW AND APPROVAL OF THE COMPLETED LAYOUT.

6.3 ESTABLISH REFERENCE GRID LINE OR BENCH MARKS AS REQUIRED TO SET OUT AND TOPERFORM OTHER WORK IN THE PROJECT.

7. DELIVERY OF GOODS TO PLACE OF WORK AND MATERIAL STORAGE

7.1 SCHEDULE ALL DELIVERIES TO PLACE OF WORK TO MINIMIZE ON-SITE STORAGE. ALL DELIVERIESSHALL BE SCHEDULED IN ORDER TO ACHIEVE SCHEDULED CONSTRUCTION DATES WITHOUTDELAY.

7.2 DO NOT DELIVER MATERIALS WHICH REQUIRE A CLIMATE CONTROLLED AREA WHEN NO SUCHAREA IS AVAILABLE. REFER TO MANUFACTURER'S REQUIREMENTS.

7.3 DO NOT OVERLOAD FLOOR BEYOND LOADING CAPACITY OF THE FLOOR SYSTEM.

7.4 SUPERVISE DELIVERY, HANDLING AND STORAGE ON THE SITE OF ALL MATERIALS ANDEQUIPMENT TO BE INCORPORATED INTO THE WORK.

7.5 STORE IN A MANNER TO PROTECT THEM AGAINST DAMAGE, HARM, LOST IN WHOLE OR PARTAND CONTAMINATION FROM ANY CAUSE.

8. HOURS OF OPERATION

8.1 REFER TO BASE BUILDING CONSTRUCTION MANUAL AND REGULATIONS.

8.2 REFER TO OWNER'S RESTRICTIONS OR REQUIREMENTS ON HOURS OF OPERATIONS.

9. QUALITY CONTROL

9.1 THE OWNER AND CONSULTANT SHALL AT ALL TIMES HAVE ACCESS TO THE WORK. IF PARTS OFTHE WORK ARE IN FABRICATION AT LOCATIONS OTHER THAN THE PLACE OF WORK, THEOWNER AND THE CONSULTANT SHALL BE GIVEN ACCESS TO SUCH WORK WHEREVER IT IS INPROGRESS.

9.2 IF THE CONTRACTOR COVERS OR PERMITS TO BE COVERED WORK THAT HAS BEEN DESIGNATEDFOR TEST / INSPECTIONS / REVIEWS/ APPROVALS BEFORE SUCH TESTS / INSPECTIONS/ REVIEWS/APPROVALS ARE MADE, GIVEN OR COMPLETED, HE SHALL, IF SO DIRECTED UNCOVER SUCHWORK, HAVE THE INSPECTIONS/TESTS/ REVIEWS OR APPROVALS SATISFACTORILY COMPLETEDAND MAKE GOOD SUCH WORK AT HIS OWN EXPENSE.

9.3 ALL WORK MUST BE PERFORMED BY WORKERS SKILLED IN EACH SECTION OF THE WORK. THEHIGHEST QUALITY STANDARDS SET BY EACH INDUSTRY AUTHORITIES OR TRADE GUILD WILLGOVERN THE WORK.

9.4 WHERE AN INDUSTRY OR GOVERNMENT STANDARD DOES NOTEXIST, INSTALL MATERIALS AND SYSTEMS IN STRICTACCORDANCE WITH MANUFACTURER'S INSTRUCTION ANDRECOMMENDATIONS. REPORT ANY DISCREPANCIES BETWEENMANUFACTURER'S RECOMMENDATIONS AND CONTRACTDOCUMENTS TO CONSULTANT FOR RESOLUTION PRIOR TOPROCEEDING WITH THE WORK.

9.5 DEFECTIVE WORK, WHETHER THE RESULT OF POOR WORKMANSHIP, USE OF DEFECTIVEPRODUCTS, OR DAMAGESTHROUGH CARELESSNESS OR OTHER ACTS OR OMISSIONSOF THE CONTRACTOR WHICH HAS BEEN REJECTED BY THECONSULTANT SHALL BE CORRECTED IN TIMELY MANNER INACCORDANCE TO CONSTRUCTION DOCUMENTS AT EXPENSE OFCONTRACTOR.

10. TEMPORARY UTILITIES AND REMOVAL OF CONSTRUCTION REFUSE

10.1 CONTRACTOR TO PROVIDE TEMPORARY POWER TO BE USED FOR SMALL POWER TOOLS ANDLIGHTING. CONTRACTOR TO PROVIDE ADEQUATE TEMPORARY LIGHTING IN CONTRACT AREASFOR EXECUTION OF THE WORK.

10.2 CONTRACTOR MAY USE EXISTING PERMANENT WATER SUPPLY SYSTEM PROVIDED NO DAMAGEOR CONTAMINATION TO THE WATER SYSTEM OCCURS.

10.3 PROVIDE OR MAKE ACCESS TO AND MAINTAIN WASHROOM FACILITIES FORSUBCONTRACTORS DURING THE COURSE OF WORK.

10.4 PROVIDE TELEPHONE ON SITE FOR CONSTRUCTION USE.

10.5 ENSURE ALL GARBAGE AND DEBRIS ARE REMOVED FROM THE WORK ON A DAILY BASIS.CONTRACTOR SHALL PAY FOR ALL REMOVAL OF GARBAGE BY LANDLORD IF THIS BECOMESNECESSARY DUE TO CONTRACTOR'S INACTION IN REMOVAL OF GARBAGE.

10.6 ALL GARBAGE AND REFUSE DISPOSAL OFF SITE SHALL BE CARRIED OUT IN A TIMELY MANNERAND BY LEGAL MEANS.

11. CONSTRUCTION AIDS

11.1 ARRANGEMENTS FOR HOISTING BY ELEVATORS, UNLESS OTHERWISE SPECIFIED, MUST BE MADEWITH LANDLORD.

11.2 SPECIAL HOISTING REQUIREMENTS SUCH AS MOBILE CRANES AND OTHER TEMPORARYMETHODS SHALL BE PROVIDED BY THE CONTRACTOR AS A PART OF THE WORK.

12. PROTECTION

12.1 UNFINISHED SUBFLOOR :PROTECT AND MAINTAIN EXISTING OR NEW SUB FLOOR SURFACES FREE FROM DAMAGES ANDCONTAMINATION. PAY EXTRA ATTENTION AND MEASURES WHEN MOVING EXTRA HEAVYLOADS OR EQUIPMENT ON THEM. DO NOT OVERLOAD THE FLOOR AT ANY TIME.

12.2 FLOOR FINISH :USE NECESSARY MEASURES TO PROTECT EXISTING FLOOR FINISHES DESIGNATED TO REMAINDURING THE COURSE OF THE PROJECT.

12.3 ERECT SCAFFOLDING INDEPENDENT OF WALLS AND PARTITIONS. EMPLOY ALL NECESSARYENGINEERING PRACTICE REQUIRED TO ERECT SUCH SCAFFOLDING. PAY AND OBTAINNECESSARY ENGINEERING SERVICES, PERMIT(S) IF SO REQUIRED BY AUTHORITIES HAVINGJURISDICTION.

12.4 CONSTRUCT AND MAINTAIN SCAFFOLDING IN A RIGID, SECURE AND SAFE MANNER INCOMPLIANCE WITH APPLICABLE REGULATIONS. IF THE SCAFFOLDING SYSTEM REQUIRESSTRUCTURAL SUPPORT, ARRANGE AND PAY FOR THE COST OFRETAINING A QUALIFIED STRUCTURAL ENGINEER TODESIGN THE SCAFFOLDING SYSTEM.

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

onespace

one team . one vision.

NO. DATE REVISIONS C • -J1\XX2D1' C-,E:< SET ...

0 ,,, TFlflFR

1 . JCll ,.lJ.Cll

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

PARTITION TYPE GENERAL NOTES

=:,\T[

17079 Jrn· 19, 2C·'t,

='LO-TED Jt.JE

N.TS Jar 19, 2C,'b

1002

12.5 FIRE PROTECTION :COMPLY WITH THE FIRE PROTECTION REQUIREMENTS OF ALL AUTHORITIESHAVING JURISDICTION OVER THE PROJECT. OBEY FIREPROTECTION RULES AND TAKE REASONABLE PRECAUTIONS BYUSING SAFE PRACTICE PROCEDURES FOR STORAGE, USE ANDDISPOSAL OF FLAMMABLE MATERIALS.

12.6 PROVIDE VACUUM WATER REMOVER ON THE FLOOR NEAR THE WORK FOR QUICK IMMEDIATEREMOVAL OF WATER SPILLS AND OR LEAKAGE BEFORE DAMAGE TO SURFACES ORPENETRATION OCCURS.

12.7 PROVIDE PROTECTIVE SCREENS AND PREVENTATIVE MEASURES FOR DUST AND NOISEMIGRATION TO OTHER AREAS NOT IN CONTRACT.

12.8 CONTRACTOR TO BE RESPONSIBLE FOR ANY DAMAGE TO EXISTING SURFACES IN BOTHTENANT AND LANDLORD AREA RESULTING FROM THE PROJECT.

13. FASTENING

13.1 SUPPLY ALL ANCHORS, FASTENINGS AND ACCESSORIES ANDADHESIVES REQUIRED FORFABRICATION OF WORK.

13.2 ATTACH AND FASTEN WORK AND COMPONENTS IN A SAFE, POSITIVE, PERMANENT, SECUREMANNER SO THAT THEY CAN NOT WORK LOOSE, FALL OR SHIFT OUT OF POSITIONS AS A RESULTOF VIBRATION OR OTHER CAUSES WHICH MAY OCCUR IN THE NORMAL USE OFTHE BUILDING.

13.3 CONCEAL FASTENING WHEREVER POSSIBLE. KEEP EXPOSED FASTENING TO A MINIMUM, EVENLYSPACED AND LAID OUT SYMMETRICALLY.

13.4 ALL FASTENINGS TO BE PERMANENT. DO NOT USE WOOD PLUGS.

13.5 USE CAST-IN-PLACE INSERTS WHEREVER POSSIBLE FOR ANCHORAGE TO CONCRETE. WHERETHIS IS NOT POSSIBLE USE APPROVED ANCHORS RECOMMENDED FOR SPECIFIC JOB NDITIONS.

13.6 THE CONSULTANT MAY AT ANY TIME REQUEST THE RANDOM LOAD TESTING OF ANCHORS.ARRANGE AND CONDUCT THESE TESTS AS REQUIRED AT NO ADDITIONAL CHARGES.

13.7 DO NOT USE EXPLOSIVE ACTUATED FASTENINGS UNLESSAPPROVED BY THE LANDLORD.

14. SAFETY

14.1 UNLESS DESIGNATED OTHERWISE, THE CONTRACTOR WILL BE THE CONSTRUCTOR FOR THEAREA OF WORK AND WILL MAINTAIN SAFETY AT ALL TIMES TO THE SATISFACTION OF THEAUTHORITIES HAVING JURISDICTION. CONFORM TO ALL THE RULES AND REGULATIONS OFOCCUPATIONAL HEALTH AND SAFETY ACT.

14.2 PROVIDE TO OWNER CURRENT MATERIAL SAFETY DATA SHEET (MSDS) FOR EACH CONTROLLEDPRODUCT THEY HAVE, OR WILL HAVE AT PLACE OF WORK AND RETAIN COPY OFCONTRACTOR'S OWN USE.

14.3 FOLLOW THE RULES OF WHMIS LEGISLATION. NOTIFY CONSULTANT OF ANY ACCIDENTSOCCURRING AT PLACE OF THE WORK AND SUBMIT COPIES OF ACCIDENT REPORTS.

14.4 IN THE EVENT OF SUSPICION, OR UPON DISCOVERY OF BANNED OR CONTROLLED MATERIAL(S)ON SITE, IMMEDIATELY CEASE OPERATION AND NOTIFY CONSULTANT AND THE OWNER. STOPWORK IN THE AREA UNTIL LANDLORD OR PROPERTY MANAGER AUTHORIZES CONTINUATIONOF WORK. CONFORM TO ALL THE RULES AND REGULATIONS OF OCCUPATIONAL HEALTH ANDSAFETY ACT.

15. SECURITY AND LIFE SAFETY

15.1 SECURE PLACE OF WORK DURING THE COURSE OF THE WORK. BE RESPONSIBLE FORPREVENTING ACCESS BY NON-WORKERS. THE OWNER OR THE LANDLORD ACCEPT NORESPONSIBILITY FOR LOSSES, DAMAGE OR THEFT OF CONTRACTOR'S TOOLS, EQUIPMENT,PRODUCTS OR WORK.

15.2 STORE CONTRACT DOCUMENTS ON SITE IN A SECURE LOCATION THAT WILL ENSURE THEY CANBE VIEWED OR UPDATED ONLY UNDER DIRECT SUPERVISION OF THE CONTRACTOR'SSUPERINTENDENT.

15.3 KEEP OPERATIONAL AND MAINTAIN LIFE SAFETY SYSTEMS AT ALL TIMES EXCEPT WHEREOTHERWISE ALLOWED BY THE AUTHORITIES HAVING JURISDICTION.

15.4 MAINTAIN AND MAKE ACCESSIBLE ALL REQUIRED EXITS, ACCESS TO EXITS AND OTHER FIREFIGHTING MEANS AND EQUIPMENT. DO NOT BLOCK EXITS OR ACCESS TO EXITS.

16. SUBSTITUTIONS

16.1 OBTAIN WRITTEN PERMISSION FROM THE CONSULTANT BEFORE ALTERNATE EQUIPMENT,MATERIALS, OR METHODS ARE USED. SUBMIT FORMAL REQUEST FOR SUBSTITUTION TO THECONSULTANT FOR CONSIDERATION.

16.2 PRODUCT SUBSTITUTION WILL ONLY BE PERMITTED IF LISTED PRODUCT CANNOT BE OBTAINED, ISNO LONGER MANUFACTURED, OR CANNOT BE DELIVERED TO MAINTAIN CONSTRUCTIONSCHEDULE AND IF DELAY IS CAUSED BY CONDITIONS BEYOND THE CONTRACTOR'S CONTROL.

16.3 SUBMIT EVIDENCE THAT SUBSTITUTED PRODUCTS ARE EQUAL TO OR SUPERIOR TO SPECIFIEDPRODUCTS AND THEY CAN BE INCORPORATED INTO THE WORK WITHOUT COMPROMISINGADJACENT OR SURROUNDING WORK.

16.4 THERE WILL BE NO INCREASE ALLOWED TO PROJECT COST OR TIME AS A RESULT OF APPROVEDSUBSTITUTIONS REQUESTED BY CONTRACTOR.

17. CLEAN UP AND FINAL CLEANING

17.1 CLEAN AREA OF WORK DAILY OR MORE OFTEN AS DIRECTED, KEEP THE PROJECT FREE FROMACCUMULATION OF WASTE MATERIAL AND DEBRIS CAUSED BY THE WORK.

17.2 CONTRACTOR TO BE RESPONSIBLE TO KEEP ALL LANDLORD ACCESS AREAS CLEAN (I.E.ELEVATOR, ELEVATOR LOBBY, ETC.),

17.3 FINAL CLEANING SHALL INCLUDE BUT NOT BE LIMITED TO THE FOLLOWING ;· VACUUM AND REMOVE ALL DIRT, STAIN AND OTHER DISFIGUREMENT ON SURFACES.· CLEAN AND POLISH SURFACES OF HARDWARE, GLASS, MIRRORS, PLASTIC LAMINATES,

BAKED ENAMEL, GLAZED CERAMIC, STAINLESS STEEL AND NON-FERROUS METALS.· SEAL, WAX AND OR POLISH SURFACES THAT ARE SPECIFIED AS SUCH USING MANUFACTURES

RECOMMENDED PRODUCT/ METHODS.· CLEAN, REPAIR LUBRICATE AND ADJUST ALL MECHANISM AND MOVEABLE PARTS OF

EQUIPMENTS AND APPLIANCES, LEAVING IT IN NEW CONDITION AND OPERATING PROPERLY.

· ON COMPLETION, AS APPLICABLE, REMOVE ALLPROTECTIVE MATERIALS, HAVE A PROFESSIONAL SERVICE CLEAN CARPETS, WALLS,WINDOW SILLS AND BLINDS, PERIMETER CONVECTOR UNITS(INSIDE AND OUT), MILLWORK,LIGHT FIXTURES, INSIDE FACE OF THE WINDOW GLAZING AND CORRIDORS IMMEDIATELYADJACENT TO LEASED PREMISE.

17.4 UPON COMPLETION OF FINAL CLEANING, REMOVE CLEANING EQUIPMENT, MATERIALS ANDDEBRIS FROM THE SITE.

18. PROJECT RECORD DOCUMENTS

18.1 OBTAIN AND PAY FOR FROM CONSULTANTS ONE SET OF REPRODUCIBLE DRAWINGS TORECORD AS-BUILT CONDITIONS.

18.2 MARK ON THE PRINTS, AS WORK PROGRESS, ALL THE CHANGES AND DEVIATIONS FROM THEORIGINAL CONTRACT DRAWINGS.

18.3 MARK ON THE PRINTS ALL CHANGE ORDERS, REVISIONS, SITE INSTRUCTIONS AND INFORMATIONNOT COVERED BY SEPARATE DRAWINGS.

18.4 KEEP THE MARKED UP PRINTS ON SITE AT ALL TIMES FOR INSPECTION BY THE CONSULTANT.

18.5 UPON COMPLETION OF WORK, TRANSFER ALL UPDATED INFORMATION FROM THE PRINTS TODIGITAL FILES USING PROPER COMPUTER DRAFTING PRACTICE PRIOR TO APPLICATION FORFINAL PAYMENT.

18.6 SUBMIT TO THE CONSULTANT THE DIGITAL FILES OF AS-BUILT DRAWINGS PLUS ONE COPY OFWHITE PRINT.

19. MAINTENANCE INSTRUCTION AND DATA MANUAL

19.1 PRIOR TO SUBSTANTIAL PERFORMANCE, PROVIDE THE OWNER THREE SETS OFMAINTENANCE INSTRUCTION AND DATA MANUALS WHICH SHALL INCLUDE :

a) LIST OF EQUIPMENT, MATERIAL AND PRODUCTS, INCLUDING MANUFACTURER'S NAME,SERIAL NUMBER AND SUPPLIER'S NAMES AND PHONE NUMBERS.

b) OPERATION AND INSTALLATION INSTRUCTIONS , AND MAINTENANCE INSTRUCTIONS FOREACH ASSEMBLY, COMPONENT AND SYSTEM.

c) CLEANING AND MAINTENANCE INSTRUCTIONS FOR ALL MATERIALS, PRODUCTS ANDFINISHES.

d) COPIES OF ALL WARRANTIES.

20. WARRANTIES

20.1 ALL WORK SHALL COMPLY WITH THE TERMS OF THE CONTRACT, GENERAL CONDITIONS- GC12.3 OF CCDC 2 2008 OR CCDC 3, 1998 WHICHEVER MAY BE APPLIED TO THE PROJECT AND INTHE FOLLOWING LIST. CONTRACTOR SHALL EXTEND THE WARRANTY PERIOD AS NOTED. ALLWARRANTIES AVAILABLE FOR THE WORK OR PRODUCTS NOT LISTED SHALL BE IN FULL FORCE.

WOOD DOORS 3 YEARSHARDWARE 1 YEARSCABINET WORK 1 YEARS

21. UNITS OF DOCUMENTS

21.1 WHERE DRAWINGS HAVE BEEN PREPARED USING THE IMPERIAL METHOD OF MEASURE ANDPRODUCT IS SUPPLIED ONLY IN METRIC SIZES, OR WHERE DRAWINGS HAVE BEEN PREPAREDUSING THE METRIC METHOD OF MEASURE AND PRODUCT IS SUPPLIED ONLY IN IMPERIAL SIZES,USE THE SIZE WHICH CORRESPONDS AS CLOSELY AS POSSIBLE TO DIMENSIONS SHOWN. MAKECOMPENSATIONS AS REQUIRED WHERE IMPERIAL AND METRIC COMPONENTS MUST BE USED.

22. SEPARATE CONTRACTS

22.1 CONTRACTOR TO COORDINATE WITH THE FOLLOWING TRADES UNDER SEPARATE CONTRACTWITH THE CLIENT:· FURNITURE INSTALLERS· OTHER VENDORS OR SUPPLIERS UNDER DIRECT CONTRACT

WITH THE OWNER CONTRACTOR TO BE RESPONSIBLE FORSCHEDULING THE ABOVE FORCES WHERE SUCH WORKAFFECTS THE PROGRESS OF HIS WORK.

23. LANDLORD CONTACT

23.1 ACCESS TO THE SITE FOR MATERIALS, WORK FORCES AND FOR GARBAGE REMOVAL TO BECOORDINATED THROUGH THE LANDLORD,

24 DIGITAL COMMUNICATIONS

24.1 CONTRACTOR, AT HIS OWN EXPENSES, TO PROVIDE OR TO ARRANGE AND TO MAINTAIN,DURING THE COURSE OF THE PROJECT, A TIMELY MEANS OF GENERATING, TRANSMITTING,RECEIVING, VIEWING, PRINTING AND KEEPING RECORD OF DIGITAL IMAGES AND FILES ON-SITEWHEN REQUESTED BY THE CONSULTANT.

24.2 CONTRACTOR TO KEEP THE LIST OF AVAILABLE E-MAIL ADDRESSES, ON-SITE, OF PARTIESINVOLVED AT ALL TIMES.

24.3 CONTRACTOR IS RESPONSIBLE FOR TIMELY DISTRIBUTION OF SUCH DIGITAL IMAGES AND FILESTO APPROPRIATE TRADES UNDER HIS CONTRACT AND TO HIS OWN WORK FORCE AT HIS OWNEXPENSE.

24.4 ALL DIGITAL FILES AND IMAGES SHALL BE NON-EXECUTABLE FILES. FILES OF HAVING EITHER .JPGOR .PDF EXTENSION ARE ACCEPTABLE FORMAT.

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

onespace

one team . one vision.

NO. DATE REVISIONS C • -J1\XX2D1' C-,E:< SET ...

0 ,,, TFlflFR

1 . JCll ,.lJ.Cll

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

PARTITION TYPE GENERAL NOTES

=:,\T[

17079 Jrn· 19, 2C·'t,

='LO-TED Jt.JE

N.TS Jar 19, 2C,'b

1002A

FHC

Suite 2700

F G H J K L M

2

4

6

8

Suite 2702

Suite

2701

ME

CH

.M

EC

H.

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

,,-,,

,---....... ( 1 '•

I \ 1(1'.\) / ....... ____ /

~ -

OVERALL EXISTING FLOOR PLAN SC;\LE: 1 / 0"

'

~

'

[

,---­~ /.,11 ·)._ a

1

i.'.:;; 1-'----'i

L, ,-

'

-

--.

- -

I

L .-

' : ' ' ' ' '

: '

i !

i ,, '' ' ' ' ' ' ' ! '

\

\ ' ' '

-II

3C'-O" JC,' 1 1/4

[91<hc,]

- - -

b-

I --=:::r I

-. \

--

j C

I

onespace

one team . one vision.

NO. DATE REVISIONS C • -J1\XX2D1' C"E:< SET ,_.

- ?-11 o.c · .17 =-:'.°')~ TFlflFR '. 1 . )!) 1 / .Li .U·~ <H ~ff/1-,111

NO. DATE ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE !>ND THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE Of WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

All. CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

OVERALL FLOOR PLAN

=:.\T[

17079 Jrn· 19, 2C·'t,

='LO-TED Jt.JE

vs· • r-o· Jar 19, 2C,'b

1003

J K L M

Suite

2701

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

" (..J - Gl c'. I. \, ~

C

'~' :::

I /-\ /

ir,-\ / \ ,, ::---; ,r----' \ /

'

/~-_J;> I I

- -4';..-------~ i=' =====F=J

II\\

r

r · ', DEMOLITION PLAN

I ' ( J4)

\ / \ __ /

['-i144rm]

11 _JJ

11 11

1-\ 11 /--\

I I ~l] /) I I ;,----_ ' ,\ _: 1)

+-1 1

1

·-· : : \rJ4 1 ----+1--____,_,_1 L- ~

11 I I 11 I I

/ L'1L\-- -U --11 I I I ---'-.

\~ 11 :: 11 I \

I I

+II II /A'- II I \ ~ ----{}-----f-E'=c

1: / \ :: .- \ ~ r- --- ,, ,,... , 1 1 r- ---, < nL ; / c,,1 \ \ 1-,

I 1' \ / I 11 I 1\ \ i / 11 \r / I < J2)

~~3--' Y L~~U . . 1b-l ~~~~~~f~c:: c.J;~)1~~~~! .. \ -1 ~~~r~~-t/;/ ~ ( ]2 \ ( ]2) I / \ / \ J/ /

\ __ / \ __ ,/ < ~2 > / \ / \ ___ / ,,, .- /

/ \ _.. (D) I \/ I ,--,---~ F'r --~L _______ ~ y ~

I ,- 1 1T11 I -,------- 1-r 111 ' / \ /

( L'. ', >- t / \ ___ / I

/ ',\ \ -·' ) -

1----... / CC \ \ )c, /

\ ___ /

/

/

[;i1 /.lm11]

I

I . I

---- "

.----,,_ ( [:5) \, ___ / ,,-------.\

( C6) -~

.I .

--- a- = - - - - - - - - ~

11 I

/ ,/ 11 ( UL) \ , ./ \ ___ /

r t- ---'

/ J4\ I I I I I I 1

/ I- _1 _ ~ ,-1 ~ = = = = d I \_;-- +--'-I 11 I / L --- - s,._:::_:1_ 2----1 L 11

: I I I I I L .,,, 7 .____/ L - -=----=----=----=-----i I 1 , LlJ I I II / ... \ /~\ II

( _;'.)) I tt-t~- D Uc/ \JI 1

._ t I I I :c jtJ =~ - .. 1

- ---'1"'-I-

'\ / \

\ ;'J)·~lTF-fh=- j ______ JJ_ --, 1

I I .. \ /, \ ~--+J-1 U __ --,i I \~4) x /r---r----; ----:-- T--,--,1 LI I

I ( [jL ) .LJ // 1 1 11

(( ::lJ

r-----1 -,,1 \ \ ~ I \ __ /

I I ,,,,... II / C\ II / --~\Ji/

I

ii 1

\ L __ _

r-

/-------:-::\ /----:;\ 1/---:---:\. ;;--\ ;,-------.\ /~\ / \ I) L /

, j/. • ~ , \ JL_/ (_Cl) \ D2;- \ D ; [ / · .

--tt== ~9 ~=~ ,I~ , I ~1-==r-, I/-,- tr=i;_ 1 a '1 -==~IT,I: ----

11 I 11 r mr r , I II I v-r II

: : /~\ '", I : : I", I : : ", I I : : I // 1111 I I \ J 4 / .___ ..J I 1 .___ ..J 11 "'..J 11 L _,,,, II 1 \ + I II II II

::1 <\s ~ I _ ::; <7±> 11 .- ii t ii + -\ E==========°i1 /r 1 \ 11 l-- 11 II , \ II 11 (D4)

1 i- I I \~ 11 1,· __ IA_,·1·•~ -----i-,-- 11 \ __ ; ~X STI \IG E/'.SE --- :L L::: 11 G TO ~ Elvl;\I \I

1-

\_. I /,-----\ ;,-------\. . /-\

111 1 ( C7) 1111 ;·· ( J7) [ 1111 11 // ( C7) I ,_ I - ·- ~ 11 . ,_/ ~ =====E== ===='l..,1/== = I ii ·--...i I I ii

--------

G-11~- =;/"-- ]- lv10LITl'.J\ l1~CJTE~;: C[lv'.JLITIJI\I i,<[v 1\IC-[S ['['In 1-1,-,,j [n[['j[· ) \/1-.._)_ 1-.._)\ _ ~ \ .1

I .

2.

1.

l<LI _I\ I CJ l,CJ L':; CJ', I _UUI'. 1--'Li\l,C; I CJI! /\l)L;I IC)l\l1\L I 'l S TR JC Tl::; II S

Tl II"' :!'<!.'ii \JG -c :,= cl[/.:: I\ :=:Jl•Ll_l\CTI::;', v\/ -1 I 1\L_ cc1,1s lllJC CJI; _;ucJl.;1_'~ 6 Ic1,I I._. ll!A,_;L CUI, lllACJ I :ic::JPI CJI 'NU,< f-'l!I PAI/I I\ llY Cl 1--J !A :;:;-JI ;f.C (:,

I 11 ;; l!IC:/\ '· ·c\/lU '.: PlilC:-: 10 l)ll./JLI I JI-I. '.:i"I) ,AC R=-::;JH=-l:. Rlc=- -, CJ

I/EC--l_o\\JIC.o\._/ELC::::TRICAL E~CI\C:C:R'S C~i"CNII\CS FOR 111\JAL \JSTR,IC-01,:,. R[lvl::;\/[ ;\ __ ::,.,<,;',:== c::\IDU TC::.

10 He c:0I.;_) c 1- v c::c.A. cl\ c: Av::II\ lllh rFl\,AT~'A.-IC~J TC': C'JCCL,-; =-~ ,t:._~=-,A.s

IJFI-/JI I-JI--J .t;Rc-f.S Ti) RF -ip:J-FC:Tc-1) RFf',t. R

; .-' '·-·'·

11

1 ;

1\I I XI:) I II\J(; \/Vi\l I~), I :JC)l,J\~c;, VV \Jl)U\ 1\/ I·(, -,\ii S, HU IC\jS l\l'JI; Cc II ll\'.;s AI\.IP.CHJ I CJ I:H:l'.:I s--I) flARTIT 01\S -o BC: HA.CE COJD TC vlA.TCH EXIS-I\C \J CC~-IS-RUCTICl1, Flf·IIC::--1, /\'\JD TY='E

[><IST 1,1::: 1 _cor; 11'\JIS l[S r:; cTlvli\l\l 2o /\_L ][ f-J~:~~ If- C f- ~ H'( CC\J 1,;A.C I(>'.·.

R:E\!Q\/:=:: EX ST l'~C, DC)C)F\'S & =-F?,AJ/ES, CL.A.z:=::=:i sc~:=::E~\S, lvlt;KE GOJD E><ISTll1I::: FLJO'\ FII\JIS--1 A'.,, RC:Jl_,l'\C:J & D1°,=cT=J [3V C:Jt-lSUL T!J-ITS.

r?[\/0 _ [)( ::,T I\JG c;'i,!] C[ILll\ 1::: & rnJLKI =/.[):; /. __ su~_)=--\JSI~'~\ i\i"Jcr~,rzl\~c..., 1rz ~-.:1 & ~=--__ \G -1._,r;,; '~1

~ /\\J "-.LL vlLCI IA~IC,t._ & LL_::; ll<IC.A.L l)_ CLC. l1IC ILJ O i kf-\/()\/,AI ()I\ )~.4'v\/l\J(;s I~) """"j- -'.-'v1()\/f-l) -<---_;< I() [\C I\J=[r(S [!c;l''NIIIC;c: -o-; 1 l!AL '"STRUC- :Jl, 0/

/ \

/ -1 \ \ : ' \ _./ / \ / -~~·

/ \

/ \ ; L-, n ' • I , '

\\ J;/ I ' I \ ____ /

, \

./ '\ / c· 7 \ \ I '·, ; \ ._, / \ /

\______/

I '-., I -;' ) ' ) \ L'l"" 'I' I "'I· j ,_),_,, \ \_1 \

c:=-\1ClVl =XI'' 11-1;; 1-,IILL'#C>,K C 0tlll'Jll':/ A.I\LJ ':'H=-L\/'!C l'AICH A.\J RE"-" R 'NA __ S .1-..S REC._IIRED RElvlO\/E A_L ELC:CTR CA._ ,<,: F'_JI./JI\IG l/5 R=<JUIR[[ ;\L_ FLIJVIJII,::: TO [3[ C/-.FFTD

-

-

( .... ' i

~) y

-

-

"

I

I l:_) (\ I \ _ _j _

I " , . ,, [E- 0 ~1 . __ ":; I\_; '\ -; Tl r~ I J \_j .

[/ S-1 \~ G F'/\c;T TIC-1 --n u I\=\//\ -J.

(:()\J kAC: ID-·? I 0 PA. IC:H A \jl) ~- _; .A. I f-; .L, \J'( CAl\i, 0.c::: TO S .. Rc-ACC:5 _A,\jl) Rll I KH=-.t.D'.~-;

- - - -,x ~-)-I \Jc; F' !\ c: T Tl (!\I 1,) r,- -~lh/::-)\/1-~. - - -

- ,l

11 11 ,x --I-i C DOCl T0, r?, l-\:1C\ilD. 11

~") \ 1,) ,,

11

'u

~

~

:::; 1·

" .-, a ~

3 ~ ~ -

fo.J .. O l'llllC: \!-i.A.II S, C:F l1lC:, Fl C:JR L,1\1) SLJ=JFI C:OR \JC: TO F,E:=:: \/E 1'R:Jr'o,;ED c-I1\ SI--C:S.

cm;P_C:TE SCDPE oc- \;VCR< S--IA._L EE CO\C-IRlvC:J 'NHEI! C><F:c1s=ei. / \ , I ' 1 ·-. . ' / '

RE\10VE EXISTll 1IC ALL rtRT -ICl'l CISCOI\ \IEC- A\D RC:'vlOVE

I I :=:::<I STI f\J G F _(J1JR T'.J BE ~:=::r,/Ci\/:=::=:. =:~:=::F;_A,=;E

C:C::l11TRA.C-C::R TJ SA.I c:- Al \/_A_T-RIA.I S R1SUI TII\.C: FR:Jlvl JFl·/0I IT 01. cc-op RFlFC- \/jf-F~C- A-ir IC:,A.R cc •

1\l1!Y :J-1--ER TElvl I\J- ~::I.oSED l'l T--11',, CiJl;ITRi\C-(JC)CJ iC, I IU\VIL'::;, _IC) I I X ._.I-:_c;, L ::; ) IC l3L C:ISPOS-J c::, I_J'·JI -ss c-I -,-NIS- r::I,,c--r:: 8Y T II

7, ;\L_ C[DRIS i.f.lJ ~/ ;\-=-;I1.Ls 1/[SIJ_ TII\<::: , 0,:Jl.;I Tl 1= I\I1-/:)III:)I\J I() lll(:C)I/ 111 l--'I!()_;II-: v /)I 1111 CC:I\J I ·ZAC C .; ,t:..\Jl:: I~ J_ ~-l·/CJ\/_~: ;'CJ[·/ I IL l'kcl\/I Sf-S fol'JI; He -'.\.A Y J SH!Sf-I) :)c l;A.II

1 4.

cT\ICV[ ALL =><ISTII\.G - _:JC< - I\I SI I=c:: ,NIT 111\1 l\c;[A 0-WCRK TO S_AO & PR[PAR[ T8 ACC[P- ~[W -LOCR f-I1-.ISHcS lJ\JI f-SS l\l)IC:A I-) I() c/H;.l\l\

RE'v1C:VE .A.LL ]OC~S, \1\/ ~JCC\,\/S .A,\JD H.l,RDVV,t.~:=:: ll~C:ORflORo\Tc-1) I\J-C: CWFI. \JCS S:::--IFDU eel) -;-; =ice

[![v!C_ SI i=c: [)1,:;- =r;CT[c-I::;I-" -o [C '" F'Ll<:C '.:;lCUI--=- /-.L_ C:c'=\I1',C)':; /JI-. u::;I.;I-'_l I/JII ::;c U\CI-- J,.y

A. R18LJ\[!AJ, - C:01\.[!,JIT. P Pll1JC:, C:l,C:T V'/:Jc;K_ -TC. IS I() He 1---\/()\/-) I() f-ACII I AC p c:i f-p\j ()Pf-l\l '.:ell I\(;

\. ) ' / \ ; ~

/--\ / \ \

I [1 !,, :, \ )\_) (

\ / ~

,~. / \

/ 1 · < ) ,/ ,> \ / ·~-·

l\_L ELC:CTR CA.L o\J,I[) \IIECHANl::;.l\L SE'\\/I:::E:i

r/[\;10/[ [XISTll1I::: C[ILll'-I::: TIL[ /.l;J T J/ -!. J SCO'!I-J[CT !JI[! f-:c /1()\/f- Al I c - C: If-; CAI :;--1 I 'i A.\ J Vic C:H.l,\!l(;.t, :-;c c(vlC:c:; REc-ER TO HC:CH,A\IC,A_ p!jC ELC:CTR CA._ DRA\Nll1JCS.

1'A.TC--I AI\D 0,C:r'AIR C:JLllv~S ALL \/vl--ERE .AJ.ACEIIT '-NA __

I IAS [l[[\J r<[l;IC\/[D A\ Y I R=/GVO<[ R.A.TII\JG lT D<ISTII\G D[\llS r-lG \/'//.LL TO [3[ lvl1.II\ Ti\ \[J

······· ...................................

-L:Jc-;: TO c/[C=I \/[ 1\J = \1\i -L081\ I\J :;

C XI '1 I\~: I-f-A.c, ~> I I'! C, I ICH I c I>< I lJf-c '; ,!\ 1-1 , '

D1Fc-,1c::::~5 -c_:i -- RElvlCVED. ~,J :=:: \,\/ --BL,R CC:l_l\!C

_I :;1--- F ><--1._, ~ :=:: s. 'NILL BE R~:JUl~~D FJR \J E'v\i C[ L I\J :; F'L/,\.

onespace

one team . one vision.

NO, DATE REVISIONS C • -J1\XX2D1' C-,E:< SET '·'

?-110.C· .17 0 ,,, TFlflFR

1. /U1:.1/.U·~ <H f-'f-f-?HII

NO, DATE ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGE~ENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORt.4 TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

DEMOLITION PLAN

=::\T[

17079 Jrn- 19, 2C'8

='LO-TED Jt.JE

1/4' • 1'-0' Jar 19, 2c, b

1010

J K L M

2

4

P1 P1P2

P2

P1

P2P2

P1

P2

P1

P1

P1

P1

P2

P2

P1P1

P2

P1P1

P1

P3P1

P1

P2

P1

P2

P2

P1

P1

P1

P1

P1

P2

P1 P1

P1

P1

P1

2-1/2" METAL STUDS @ 16" O.C.

LINE OF FINISHED CEILING.REFER TO DWG 1030 FORCEILING CONDITION

APPLIED BASE CONDITION AS PERFLOOR FINISHES PLAN 1050

(1) LAYER 1/2" GWB EACH SIDE

2-1/2" CONTINUOUS METAL STUDRUNNER ANCHORED TO FLOOR@ 16" O.C.CONTINUOUS 14" BEAD OFNON-HARDENING ACOUSTICSEALANT ALONG THE BOTTOMOF GWB

D200 METAL TRIM

LINE OF FINISHED FLOOR

WALL FINISH, REFER TO DWG 1060

U/S OF POURED CONCRETESLAB 11'-0" AFF

BRACE ABOVE WHERE DOOROPENINGS OCCUR

SECURE TOP TRACK TO CEILINGGRID WITH RENOVATION CLIPS.C/W DOUBLE SIDED EXPANDEDCLOSED CELL COMPRESSIVEPVC GASKET (TYPICAL) C.H.8'-9"

2-1/2" CONTINUOUS METALSTUD RUNNER ANCHORED TOFLOOR @ 16" O.C.

LINE OF FINISHED FLOOR

U/S OF POURED CONCRETE SLAB11'-0" AFFD200 METAL TRIM

0 RATED SMOKE BARRIER WALL

2-1/2" METAL STUDS @ 16" O.C.

CONTINUOUS 14" BEAD OFNON-HARDENING ACOUSTICSEALANT ALONG THE BOTTOMOF GWB SEAL AL GAPS

APPLIED BASE CONDITION ASPER FLOOR FINISHES PLAN 1050

(1) LAYER 1/2" GWB EACH SIDE

FILL SPACE WITH FIRESTOP TOU/S OF SLABCHAULK AND SEAL ALL GAPS

3-5/8" CONTINUOUS METAL STUDRUNNER ANCHORED TO FLOOR@ 16" O.C.

LINE OF FINISHED FLOOR

U/S OF POURED CONCRETESLAB 11'-0" AFFD200 METAL TRIM

0 RATED SMOKE/ PLUMBING WALL

3-5/8" METAL STUDS @ 16" O.C.

CONTINUOUS 14" BEAD OFNON-HARDENING ACOUSTICSEALANT ALONG THE BOTTOMOF GWB SEAL AL GAPS

APPLIED BASE CONDITION ASPER FLOOR FINISHES PLAN 1050

(1) LAYER 1/2" GWB EACH SIDE

FILL SPACE WITH FIRESTOP TOU/S OF SLAB CHAULK ANDSEAL ALL GAPS

FILL CAVITY WITH 2-1/2" MINERALWOOL ATTENUATION BLANKET,MINIMUM 2.4 PCF DENSITY

LINE OF FINISHED CEILING.REFER TO DWG 1030 FORCEILING CONDITION

FILL CAVITY WITH 2-1/2" MINERALWOOL ATTENUATION BLANKET,MINIMUM 2.4 PCF DENSITY

LINE OF FINISHED CEILING.REFER TO DWG 1030 FORCEILING CONDITION

P1 PARTITION TYPE 1

P2 PARTITION TYPE 2

P3 PARTITION TYPE 3

23. ALL WOOD SOLIDS AND VENEERS TO BE FIRE TREATED AS NECESSARY TO MEETBUILDING CODE REQUIREMENTS.

24. ALL EXPOSED EDGES OF GWB TO BE TRIMMED WITH J-MOULD OR CORNER BEADOR AS OTHERWISE DETAILED

25. DO NOT APPLY GWB UNTIL BUCKS, ANCHORS AND BLOCKING, ELECTRICAL ANDMECHANICAL WORK HAVE BEEN INSPECTED AND APPROVED BY OUI.

26. MAINTAIN REQUIRED FIRE RATING AROUND MECHANICAL AND ELECTRICALEQUIPMENT AND OTHER INSERTIONS.

27. INSTALL ACCESSORIES STRAIGHT, PLUMB OR LEVEL, RIGID AND AT THE PROPERPLANE.

28. ANGLED PARTITIONS TO BE INSTALLED AT 45 DEGREES UNLESS OTHERWISE NOTED.

29. ENSURE THAT ALL OPENINGS FOR GLAZING ARE SQUARE AND SOLID FORRECEIVING GLASS OR GLAZING FRAMES.

30. WHERE MULTIPLE GLAZING PANELS ARE SHOWN, ALL SECTIONS TO BE EQUAL,UNLESS NOTED OTHERWISE.

31. UNLESS OTHERWISE NOTED, PARTITIONS SHOWN ON WINDOW MULLIONS TO BEINSTALLED CENTERED ON WINDOW MULLIONS. CAULKING FOR SOUNDATTENUATION TO BE PROVIDED FROM FLOOR TO CEILING.

32. WHERE NEW PARTITIONS BUTT ON AN EXTERIOR WINDOW MULLION, CLEANLYBUILD USING NEOPRENE GASKETS FROM FLOOR TO CEILING.

33. FILLER PANELS TO BE PROVIDED BETWEEN COLUMNS AND MULLIONS ASREQUIRED.

34. PROVIDE DOUBLE SIDED FOAM ACOUSTICAL TAPE OR GASKET WHERE PARTITIONSMEET WITH CORE WALLS, COLUMNS, CONVECTORS, COVERS, SLAB ANDCEILING.

35. ALL DOORS TO BE 6" AWAY FROM PARTITIONS ON HINGED SIDE OF DOOR UNLESSOTHERWISE NOTED.

36. UNDERCUT DOORS TO ALLOW FOR 1/8" CLEARANCE ABOVE FINISHED FLOORWHERE REQUIRED.

37. REFER TO DRAWING FLOOR FINISH PLAN FOR WALL BASE DETAILS

2-1/2" METALSTUDS @ 16" O.C.

(1) LAYER 1/2"GWB EACH SIDE

WALL FINISH,REFER TODWG 1020

CORNER TRIMREQUIRED WHENADJACENT TOP2 OR P3 WALLS

INSIDE

OUTSIDE

EXISTINGWINDOW SYSTEM

LINE OF EXISTINGRAD

FILL CAVITY WITH1-1/2" MINERALWOOLINSULATION

13. PROVIDE NECESSARY AND ADEQUATE BLOCKING OR REINFORCING WITHINPARTITION OR IN CEILINGS WHERE APPARENT LOADING IS ANTICIPATED.CONFIRM WITH DESIGNER AND REFER TO FURNITURE PLAN FOR ALL WALL HUNGCOMPONENTS. ALL MATERIALS USED FOR BLOCKING OR REINFORCEMENTSSHALL BE SOLID NON-COMBUSTIBLE OR BE OF FIRE RETARDANT TREATEDMATERIAL THROUGH OUT THE MATERIAL. NO MATERIAL IN AIR PLENUM AREA TOBE OF COMBUSTIBLE OR GIVE OFF TOXIC GAS OR AIRBORNE PARTICLES.

14. THE CONTRACTOR TO BE RESPONSIBLE FOR ALL CHASES, OPENINGS ANDPATCHING AS MAY BE REQUIRED BY MILLWORK, MECHANICAL, PLUMBING ORCABLING TRADES. REFER ALSO TO REFLECTED CEILING AND POWER, VOICE ANDDATA PLANS, & REVIEW THE REQUIREMENTS WITH THESE TRADES.

15. THE CONTRACTOR TO MAKE GOOD ALL DAMAGED SURFACES RESULTING FROMPROJECT. REPAIR AND MAKE GOOD SUCH DAMAGES IN PROJECT SPACE ANDLANDLORD AREAS WHERE MECHANICAL, PLUMBING, POWER, VOICE AND DATAPASS THROUGH.

16. REFER TO WALL FINISHES PLAN AND IDENTIFY ALL PREPARATION WORK REQUIRED.PATCH ANY HOLES, FILL CRACKS, REMOVE ANY BUMPS OR PROTRUSIONS ANDSAND SMOOTH. SKIM COAT ADDED AS REQUIRED.

17. WHERE NEW WORK CONNECTS WITH EXISTING AND/ OR WHERE EXISTING WORKIS ALTERED: ENSURE NECESSARY CUTTING, FITTING AND TIE-INS REQUIRED TO BESATISFACTORY AND PERFORMED UNDER THIS CONTRACT.

18. EXISTING COLUMNS AND CORE PARTITIONS TO BE PREPARED TO RECEIVESPECIFIED FINISH. THE CONTRACTOR MUST VISIT THE SITE TO EVALUATE EXTENT OFWORK PRIOR TO BID SUBMISSION.

19. THE CONTRACTOR IS TO REVIEW WITH MECHANICAL ENGINEER ALLMECHANICAL EQUIPMENT THAT REQUIRES ACCESS PANELS BEFORE DRYWALLCEILINGS ARE INSTALLED.

20. SOUND ATTENUATION BLANKET IN PARTITIONS TO BE CONTINUOUS BEHIND: ALLPOWER AND COMMUNICATION WALL OUTLETS AND ACROSS DOOR / WINDOWHEADERS WITHOUT INTERRUPTION TO PREVENT SOUND TRANSFER.

21. MAINTAIN CONTINUOUS SOUND ATTENUATION AT PERIMETER CONVECTOR UNITCAVITIES AND AT SOUND ATTENUATED PARTITION CONNECTIONS.

22. COMPLETE INSTALLATION TO BE SMOOTH, LEVEL OR PLUMB, FREE FROM WAVESAND OTHER DEFECTS AND READY TO ACCEPT SPECIFIED FINISH.

1. REFER TO GENERAL NOTES.

2. THIS DRAWING TO BE READ IN CONJUNCTION WITH ENGINEERING DRAWINGS.

3. REFER TO ELECTRICAL & MECHANICAL ENGINEER'S DRAWINGS FOR ANYREVISIONS FOR LIFE AND SAFETY.DISCREPANCIES BETWEEN OUI AND ENGINEER DRAWING TO BE REPORTED TOOUI.

4. APPLICATION FOR ALL PERMITS ARE TO BE BY THE CONTRACTOR, COSTS TO BEINCLUDED IN TENDER.

5. THE CONTRACTOR TO COORDINATE WITH THE TENANT'S CABLING CONSULTANTS.

6. THE CONTRACTOR SHALL CHECK ALL SITE CONDITIONS PRIOR TO SUBMITTINGQUOTATION.

7. THE CONTRACTOR MUST VERIFY ALL JOB DIMENSIONS, DRAWING DETAILS,SPECIFICATIONS AND REPORT ANY DISCREPANCIES TO OUI PRIOR TOINSTALLATION.

8. ALL TEMPORARY BUILDING SHUTDOWNS TO BE COORDINATED WITH LANDLORD.

9. FINAL CLEANING SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR.INCLUDING CLEANING FLOORS, WALLS, CONVECTORS, BLINDS, ALL GLAZINGAND CEILINGS. PROFESSIONALLY STEAM CLEAN CARPET AND WAXING OF HARDSURFACES AS PER MANUFACTURERS INSTRUCTIONS.

10. SUBMIT SHOP DRAWINGS FOR ALL CUSTOM MILLWORK AND OTHER CUSTOMMANUFACTURED ITEMS WHERE REQUIRED, FOR OUI REVIEW AND APPROVAL.ALSO REFER TO PROJECT GENERAL NOTES.ALL APPLIANCES BY OWNER SIZE TO BE VERIFIED PRIOR TO CONSTRUCTION OFMILLWORK.

11. THE CONTRACTOR SHALL PROTECT ALL ELEVATOR CAB SURFACES DURING THECONSTRUCTION PERIOD.

12. ALL PARTITIONS TO BE MARKED ON THE FLOOR AND APPROVED BY OUI PRIORTO INSTALLATION.

13. PROVIDE NECESSARY AND ADEQUATE BLOCKING OR REINFORCING WITHIN

PARTITION NOTES

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

;~, { ) '-~i

___ (\ ,----J\\J, ___ _

\

. .. .. _

-- ' 1---------

\1

II //

// l /~-­//

f/

' ' ' '

' ' ' ' ' -

,_

.... -~,\ WALL TYPES i L

11

\, ir:i:r:·/ s::_;.:\_l: 1" --- '.:/ -..._ ___ ,,

11

2,:J'-11

lg. 3611·· ,J

11

0' R 1 /4"

R+E OFFICE CD:'.:, I

§ cu

' -~

/-- ,_ PARTITION PLAN \ 11";n ' 1·,:--,.1 F· 1 /'" --- 1 ·_,-," '-'~':'/ , ., ' , ! ' - ..

--) I,,

PLAN DETAIL SC!\_l: ,_,.

R+E DEPT I CC2

1--· / \ . I \_,

)

G

11

s· ll 1 /4"

R+E OFFICE I 11:M I

·,-------\

(\'. r. ----++-----t-/

I .. ,,,/

T

m "·-. ,_ ,~1

'

D

'

n 7'- ' ()

C)

' u (/)

n '

SIM.

0' ii"

R+E OFFICE I ,::o:,

1/ 1 '/t:'

,/ \_,· \,~/

S-2 i/!f'

vV/:_L TC B~ R:=: \F~)~:=E=:i T'.J SJPPOR- -.;

;-·

/ '> \ /

''-4 1

IT/ ERVER ROOM Q C I

11

/--\ ---I+-(/ \ , I \ ____ ;

05

j(I' c,"

l·Jlt~r· 11·J

11

Hi'-8 1/L"

11

MEETING ROOM I C06

/ '\. =8---_I, ;

\___/

SMALL MEETING ROO I \ I C 17 ----t-t~\ /

G ,.

' I

11

/ 9 1/;;''

5' ,J" - 4' 0 i/K"

..r·; -~ I '

. _) \

OADD OFFICE I c ,, I

·---

,/-\, \ / /r---,\

\ .. +- 1---1-c--\ ___ /

];(-J ]/L"

~- VVA I Tl! FF FFll,IFCJ=iC:FrJ -c ~;1,J~F·~~FiT T/

L'-1 1/L'

/

Kl CHEN

n ' D

o· :;. ;· \ \ . \_/

/,----\. ----+--+i \

\ / \___/

'' ·,.

I

rr- 11100 -- .. --1

I

11

/

~-

·, ' '

C

' cc

' \ o:,

\ /,>--+-+-- ~

\ ",-._ /

\______,7'--

I I \ ;,

\ ' ,_ ..

c-

STORAGE ' WI I

'

'

c:..:'-1 1./.1''

11

,'.C'-1 1/4"

FINANCE DEPARTMENT I C:J7 I

/~\A~:l,.f\r) \ /scF:=-n~ ' .

- j' :/K

HR DEPARTMENT 0')

.,r--\ --t-+----<' )

\ ____ / (~) (~) cory1 ~~EA __ _

\ ___ / 1 7 _.. ••::::::=== :\:::::::=::::::::::::;f==;=i:=======~ -------¾c:-::::;;1---------'t,==== =;ii _,_ ----1 ::;~)U -'I'! l~. ~ -L 1 ,·

LL_I +-- +-+---<; \> \_/

I

I

11 '-:;" E.'-7 1/J"

'I-!/, HO t,IHT! -™--- +- -- ~ l. ::op,, ::::nl l•IITS t+=:===t::::i========''=== ;nov, co::,1-r;

11

\ \ ..

\ _ _/

I

G

11

/

Fl ANCE OFFICE

CJ)

9' 1''

,,._,

'

,,---------..,

\ )

,JJ

'

'"

/

HR OFFICE I -,·o I u~,~

HR OFFICE I ,: 1 :) I

~ ,, ~ u r,c • ~ ' i',O ' ,_

J :::

SIM.

onespace

one team .

NO. DATE C, ,. -J1\XX2D1'

1. /U1:.1/.U-~

NO. DATE

one vision.

REVISIONS

0 '.'J, TFlflFR -:)-: ~ff)l·,111

ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE !>ND THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE Of WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

All. CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

PARTITION PLAN

=::\T[

17079 Jrn· 19, 2C· b

='LO-TED Jt.JE

1/4' • 1'-0' Jar 19, 2c, b

1020

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

/

I

/

\,· UL.1 / . /

I

! • • !

• • ! •

/

f----~

/9'-11 .J/r]'

19' j/imm

R+E OFFICE -~,~~-

\ ·, I

I

R+E DEPT. I c:07

,,-rl ·, ' ' I ' ,, \ '

\-'--c::,-------/

c:.>--- -----.) " I I I I 11

~+~ ,,z=_=~.

i I RECE:,TIONI

//

I

\\ ~ I),! I \

'--~==~ \ ',,

FURNITURE PLAN /'-Ci"

'. ' !j

. -

. .

/

.

R+E OFFICE - ---D84 +--

\

:::::J r . - . !

()c,

~ , .. , .. n 'L J .... ' " -- --·

I I

I

--.. ·. ·- j~~--=-~~=: ··, /1 "1

\ CJ r:.;, V 1' n ' ' . - . ' I

' ' 1- . .,

/ ' .

LJ

~ I ] I ' ' (_~,

I ).>

I

l I c:,

' I

CJ rn n

] :1

-j

'fcj

C'-F/ ;\I'/;' T[ "J - w. \ ~ '-- - / \ \,I \

I\ I

I \

I

I ; \

' '

4 -"'

I I

jC'-U"

l9144rTml

R+E OFFICE -00'.j-l- - -

-

1/ 1/

I

c~--=-~~~) .. " I Li .--~

't ;(;' -

- - . )

',

I

I

(

\_----l

SMALL MEETING ROO I

,::. 1 / I

--.. • .

---= / '" p-?-;- \, / \ ' -~..,_, ,, '

I ( 111 ,, I,

~-- j\ / \ ;.L ___ ------::c, ~- / Jc->

. .-,T-!

gADI] OFFICE

[

,-'

I __ < ~ ''i' ( I ,-------:) " C ,, __ / -'------ __ / •,

,/ I

i

IT/ ERVER ROOM . ·-----

(_); .")

I

l:<I'.:: \C t:'iSl tJ,.ILLl I\C ICJ -iUII/. \\

\

T[I\I[)[!',; [ '•I');\ \/\/11\1 ,-, ,I \ /-.::., \,i ,,i \ I, ,

./ \• '' 1, '-.J

L

L

/

,~'::-----~­

I \._ ,/

I/~. ,~1

I \ __ ,,, \

r

( ~', I ! I ' ' ' \~l)

------

KITCHEN o j I

I ,,

L _jJ:..,

/I (_:-1 /

I •

I I

~

z )._--..,

(_;1

I

I

I /

/'

I i

' /

\

/

Ul / I' I /S

I

/ /

/

/

'

I

co

\

I

ORAGE l) , 1

/

:z:: ::z )> )> z z .-._ C; ~ er ,,.--c-):\

i' 1

1 1

1

\ ' I ,~.-l_j

."':r:'-1 ·./f'

I917:'im-"1

' ::z:

FINANCE DEPARTMENT UU/ I

Cly-\ \ '

' ' I

'~~ ~(.,/ c.---·

~---(' --.... _.__,' I ', \ I ' \

\ / / '-------( __ J'-,)

'

I

::c

HR DEPA TMEN: I JI ;t:· ==

r--, (' -- -'--y-,,

i \ ", \~,./ ,/

I

L' / y

',, I

FINANCE OFFI E

(~)_(""'\

I I ', ' ' ' ' ' \. --c__J---'-._I

I

HR OFFICEI I '_"JO I '.,I._,_,

(--1_--, _,,,

I ', \

I I I I / ,I

'.. ~/

HR OFFICE I Cl~ I

/

~

0

" " " ~ l ~

~ ~-

onespace

one team. one vision.

NO, DATE REVISIONS C' -J1\XX2D1' C'lE:< SET ,_.

1. JCllri.l:' .1 / -:H If N lf R

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

FURNITURE PLAN

=:.\T[

17079 Jrn· 19, 2C·'t,

='LO-TED Jt.JE

1/4' • 1'-0' Jar 19, :zc,·.::,

1021

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

REFLECTED

SYMBOL

I

R+ 0 FICE I cc

R+E EP CO)

RE EPTION '.)(;1

(---:\ REFLECTED CEILING PLAN

CEILING LEGEND

DESCRIPTION 1---3/\-\ '.::YS llvl ' ' .. f' ' ,~--( L; - '' ~ A~

Vl,L,\J ~ ~Ac-, 1 R EFc: CC:RTAl\1-C:ED CE _11,GS ~;-YL[ 1'=<TORl1I.A 1111= IISS, </[D -, AJ,I E_ SIZE

'l ,. " ,---n ,, L'J Xbu

:::8LC:R: "i \I 1; IIT[ TE',:I Ji. H-F-2:;e,7

i ii. =~G[ [;[-AL TRIii GR D·1 "/1 ,c," • • _1, ,_, CL/'551::: ST/'.O SYST[lvl :::~:r\1 .A.C r\.A.\ ~:\' VC:cHfRSCN t)L/-E)/°'.)-b/-5i:

'.Tl 1\11~ I IIIG T ;::::,' ,,) o" /\11

0

'

R E O FICE

\

IT/ ERVER 00 I 011 I

-O--i-1----',G., -'s-,,, ._-J

'

SM

,, '

A\

I 81

' :_) ~

0 1 02 I

j

Hf-----+---++-~ ' ,,

MEETIN ROOM

-f\ A

SYMBOL DESCRIPTION A REFER TO ELECTRICAL DRAWINGS

I - ' R-'.fSSf ', PCI c; H I ' ' 1,;1.A.\UF,°CTIJF'ER: EJFIOF,0 SE _ICHTll,C STVLE: i3Rlcil-3'3

C) C,,

~ ~,IZ[: DA. co c, ~;' n IROlvli ' ' ' ,,,

L1\l.;I R .3D:~G K I lf 1\I fR \11 j/,,1 - ,, (\j\j ', lil!,RK- I \Jc; ,,

' CO \~-.ACT: JOHN l,;j O \ ,< q 5-879-4C6-~

INA CE DE ART EN OJ5 I

cm'i I

SYMBOL DESCRIPTION

' ' ~ • C,

" I'-., I

" ,;_,

~ -~

A REFER TO ELECTRICAL DRAWINGS

FLIJJRS::E\T Ll:?HT Fl\-~RE

I I.;IA\ f,L,CIURf-: Cl_ CC( ; -(_'

- ,->_)

STYLE RECESSED 1J,t,RA.L_EL LE\l~ED L ~-·, TROFFE~ S[:LC- _3,,A_ ,:'\CF SIZE: ~('i, .c:---"

L _) XOU

COLC,\: \i'v'I IIT[ I Alvl f' .'i~:::u K

onespace

one team. one vision.

NO, DATE REVISIONS C' -J1\XX2D1' C-,E:< SET ,,

0 ,,, TFlflFR

1. /U1 .. 1/.CH <H f--'f-f-?HII

NO, DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

REFLECTED CEILING PLAN

=:.\T[

17079 Jrn· 19, 2c,·3

='LO-TED Jt.JE

1/4' • r-o· Jar 19, 2C,'b

1030

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

NOTE:

POWER

SYMBOL n ' ' u

;1,--e= ~

-e= ~

C,,I

rr

~ ':'JI,,/

,., \::__',/

<1111

<I

""l

J!,' 11 7;/'-"

IS 13Grrn1l

,,'_,.," " ' /

.7,0'-(j" /

_OCL 1cri Of f _OOR VICuULl':i IC :1: \/lR f IU) 'Nllf- f,C:1 IU~l :'i'-f." 7'-ri"

i!-C' 1 1 /4"

IS175rrml /

7'-'./'

--r----------" 11------0 C--------H---------0 -----+-------Jl------11------C IC----+---+-----J ------ C----------"1------H-----~ ------ C----+---~ 1----------"1---+---J -----+-- C---------' C----+--------J •

,-

,- -.

:··-~ x1

"-· ;;?

i /,/ x·1

' )

' _)

R+E OFFIC ~ B,c\c~

C;

,J h i

R+E OFFICE

/---,, ' ,, ' ' " \--'._._,/

1~Y=~~~

'._il

I ' ' ' ' ' ' ' \ _.1-t=:"":)

1

1 1 1 1

l> t> t> /

X

i FINANCE DEPARTMENT

I CO? I

/__J:- - , ,-,

,-----. -~~(-,

\ \ I /

t>

' ' ' I

F(': =, u \

COUIH~R TC::; ci"l'rE:; (CEIHEREC O /~Ci FILII-J:; C.A3 \JE-'1

!

-· I

0

'

" R+E DEPT OUILll -CR

l'-10\: ,6,\J 1\/1 I\ C~l\/'Jll-!

I \ \

I ' ' / I; 6 5" FINANCE OFFICE~ -++--'-

C ,,., '-.J

C ' ~ l~

C I

POWER PLAN

'

) _,

( ' ,)

1i '' \\:= = = )_,'

RECEPTION I

,,,,- I ,! ,.

pn\\/-R TC c; \, ---:; :::11\. \\//\

( C ,fffR ,D)

w

'

1---- ,' 'I

' r

I Cl

~ SMALL MEETING ROO v I I 017

----+1--0U I Ll '

/.-.-~---~ -----a /\ I ------"-.-,-- - -.,

\L/ OAD!D OFFICE 'I ' '·-;-. _ _-/ C ·' C I

A 1 [) Pu :=:R -c

(:;c,,jff;[J; 1111::11T ,en T\/ -~~ n­v--!1- ,r; cl\1 ,-, T,

__ /_.-· ('I L'Jc-· .A.\,_',1 \./ ):)'.,,\,.'L,',·

,_ L 6' ::ll i"Ll~llU ~\ -·' -~ I// I 1-1c;1 IT ,en TV ,J, '?111,,; cr.1

()

' C)

·c:. IT/ ERVER ROO CL I \VAL_ (C Ei'ITR ED) ) HEIG-T F:JC; Tv TO ?E

VER ~IED iJ!I SITE

F( '

G1 I I

' w

J' u·

-we DJPLEX RECEFTC:L~S 0\1 28 f'IVF : RCJ T

j'-ti 1 /:,"

\__ )

u

' ·..,, .. '.-' c,·· COPY AREA I JI L

CP

(·'8'' /\-~)

·,._ ~J

c--'---~

,J_..)

X )>­

, .. _,

I' I

KITCHEN I C_ D'3 I

[I 1~/ I'. '­I

,, PCV\.'-R -:Jr<· _,_

.- ,1~'

Cl I

(), 1 ,:_:, I

T

I ')

(

T

,_·,1 (___:-

,~IC---C-FJ D '-/-/ =-R =-c ::r DIS'1\·V,:\Sf-:=: '-

\_ -- .1_/ 0-,

x·

/ \ ' ' '

, __ T'-'

I A,

-5"

rc:-

HR DEPA ] MEN~ Ole

l

X

C

xl

- I

' I • ~\::-~:--. I

REFER TO ELECTRICAL DRAWINGS FOR FULL ELECTRICAL REQUIREMENTS. REFER TO DRAWINGS 1070 AND 1080 FOR OUTLET LOCATIONS TO BE COORDINATED WITH MILLWORK/ FURNITURE.

AND COMMUNICATIONS LEGEND

DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION k~~--SS-IJ - uSH lvl :; I_, 1,I - \

- ou~: i'/UNUlvlf 1-11 \JIC!\llS ':lf'i\ - \\ 1/\LL \/UUfl llU u'J IL:IS \ 1\//\ I I )u ~;,I ~>< Hf/;ff'I , , I f ;\ I ' ,;,1''

/\J J' u /"-"" - C:=:\-F-'.:=: c; F l'vlE~-\JC Ti.EL~ LOCf,JIOI: l' /;CCCl!IIVIO- -E: \~) I " H- lvl CJ, \I f \ t, I '.>-1" Af- hl

-._) ,) )

[J ~ (~)\I ~.A. I.A. Uu 11 ,- ( ) Iv' \ - ,) -

\/.//j,L_ 1110,IITED DUP _EX R~:=E:::i-/'.CLE _,\IL~SG :.=i-H:=:~;vv1s:=: lfJ-~[) I._) \ / \ !

TC) R, I \ST:\I I -1) !SL -

COSH,R /J I 1,1:; IT =::ONSl'.3-\:=; ,,-, ( 2 \I ~:=::.:.::=:l;l,\CL:=:S u ) \

SP~C - f I; ~) hi f f \//, I ('1 \ < / ,-. \ \ ~TV,;ORK DF'.C)-;S BY C

El,J:: OF lvlE~TI\G li\3LE LC:AJl:::I\IS T!J A.C:::8 (\/Ii/ Ci =:,.A.-:=:: ,.,, \"

\L/

5~:c,L,F:ATE \/ENC!J:;c ( ,-.,·,,\,'\ J,-LET) ( 2 \I :.A.TA. 0, TL~-s ' \ \ \.....' '\ \

ll!JTE: LiJC.6J o·\ -o BE COOR DI 1,1/'-~[ \/,J,D,L_ 1110,IHED :CF:O,_ll~D ~.A.UL- \TECJcU1'TE"; (" \ =:u-;L:=:/ REC:=:1)-_A,:=:_:=:S (::::.A.I·-~:::: =:; :'-', "

\LI uU \//1-1 I :cu 8[\ si-= RE::~ ::;TAC L~ .AT T(::; I ::;,LL 4C F.F. Ul:LESS o- 1-'")'s,',/ c-- 1110-=c \ =-\//C)R /.. D<o=s CY S[:C/,R!T[ \/[I\COR - \ I', J_

C:]I c-;, I,, </- \j SI I llRI.JSI 1,-; ST/\ \ -c::c:: c;--,i : \ I '-/-/C:: I\< CCll:I II\A~:1~::1,z C) Cl!I All 11 I I/

"' _,

(' ,/\,'Ii f c;v Hf H, 1\ Iv/; C-1 \ c; ~:~)\/~ ~ f-' I ;\ I f 10 Hf V-/i\L_ lvlO.~ITED DU 1' _EX SE-:/\:;//\-:=: n :c;cu1- :=:: \\/ \ 0 :cc1mr::s 1-1 Tl I[ ,,, /, L \ ·,, I <'' ·' ·, V '/'.' _µ,, - ) f_U':iH 'iii I H r\Jt.V/ - l()(JR f \ ':H kf::--1 I H(L\Jlfl) !, (f' /\. - J' Ulll ~cc - /\ ,L)

o----,:=:~V\/ (:=-w:i-:::s v_

I ['' T/ ,, !, -, [ :JUT_=- <r \,\/i\l ,,--; T(', Fl<·("';,\/ ~- =:-1\,\'---;:: ICT ;\\I) ,;/J;\ \ ,,v \..1i·\J_ V ' ' ' 10 :-:YS - \/ ~-) - uk'\I URf \/f 1-1 ) ~:, R u SUI 1 'I V V\/IRlr\J:;

\'\//\ I lvlCU 1,1 I - I J \, ~ \t/C~k< I) ,'.O 'S fiV I !

-/\F:\ESS. SI -~/\ 11 VI N \" ? (NI I V/()l?K cc:,\ I I 0 <' ~ '.·> ~:,JR V

,, \/ f k;\ )I,)

', ', , ' Ckl.A.ll H: :J\\/~\ i -. l~11-1:;c; ~I IHl X2 IJU\/tlUi I\UIC,A. - c.; C)U.A.\ IIY Cl SI.A 01-1':o I :_: 'v "( u

's1\//\ L \I I 1, ,_ J BE SER\/ C~D BY Ei\C- ~~~[)_ :=:A.CH ST/',-0 \I ,

) \ \~ _ RK 1Jk:0~1s -'f R I 0 11()1\J -o '?[C= I.,/

_,

)

I EB 'NIFTLESS CESS r)OI l~TS /'7\ \ ET\,\.1 C F< K DRo=s BY [ IB] \/V,A._L \/OIJl\-~D -ELE-'-0\IE 0 / -L~- / I\~;

S[PARA-[ ![l,IDOR lvl ti \JLIIU\ \ 1\/.A.LL \;ICU\ ll) CUI _l S~P f -"11 - I f RC:lvl IU-' fX ._, -~

F!EFEP TO E\:; \E~F:3 -,, :::;: !:,_'1,I/ I\IC~~; Ft'1:::::' ~ ', H .t. F: [) \1\/ R~ CD\ I~ ECT DI~ ( 1 \ ;,f-'I -x kfC:ff'I "I f _, " '\ ,, '--' '· '

[\ACT n l:J,IGUR,LJIOl-1. s=.AR[ TO J[ ,.S[C )

,DR :\CD Tl C l~/\L [i/J /\ =-:,'?::ps 'jjQ/•~-o [ IJ ET'i'/0°/K =;, Fi ::: 1i ~; BY SEr'i\.F:.A-E VC:IJD:~p /\ '/'-'\ 110-, ;\I Tl IIR'vlCST/',-S i\l-1 D S\,\/ -1:: IS TO n, lvOll~IT,D f :;1,,1-1-/1-lil I 1\1 () - I J U,I f-' I .Ar\lS A.\ \ /_J,'-, ) (I\ETNOF:K CO\ -F}.A,CTC) :::;,; TO CR:=:,A-:=: THEIF: (J \,\/ \ __ ' '')

' ; 'IF· Y' FCU:cl.;l~I\JT I :-, T C .A.I ;_~Ur111 A,I I I\ V _,-,,_, ,. /

\ CJ='-1\I\C;S 11,1 Tl 1- \f/i\ I I !

oJ,c I :'-'T u

-~ \ \ I I

(/'/\ ·---.,.,

',.~_)

,:::::

HR OFFICE ~ I JI,, I

~ C - " C\ C\

I t: -3 ~

~ -~

onespace

one team . one vision.

NO, DATE REVISIONS ,s; ·J 1 XXX2D 1 CHEC< SE-,,

L, 201 BJ> 17 =-J::;;; TEIOER 1 ' '.)01 /.1 '.) .(H - '.) ---<'. H R\'111

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY DF ONESPACE AND THEY ARE NOT TO BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEh.4ENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONfORh.4 TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\IT

SURREY PLACE CENTRE

ADDRESS 777 Bay street Toronto, Ontario

DR.t..\'il\C;

POWER AND COMMUNICATION PLAN

=:,\T[

17079 .Jar, 19, 2C"8

1/4' • 1'-0' -Jor 19, 2C b

1040

R+E DEPT. [22D

POWER AND COMMUNICATION PLAN N.T.S.

0

SIT/SERVER ROO ;;, []I[]

3'-o"

TWO DUPLEX RECEPTACLES ON 20 AMP CIRCUIT

b 3'- 1 8" ~ 3'-o"

MINIMUM 1 ~- • DUPLEX

RECEPTACLE ON EACH WALL OF

--- LOCATION OF FLOOR MODULES TO BE VERIFIED WITH FURNITURE

MEETING ROOM ,,-1=*"''1-------"=llo=------'==ll=J--..

OUTLETS AND TV POWER TO BE

1,r--------- -----.itec-tHl::;#-~~~.::-it--::.iir ~---+----"l'- L _J ALIGNED ON WALL

7'-6"

"T1 "T1 z z )> )> z z 0 0 rr, rr,

(CENTRED) HEIGHT FOR TV TO BE VERIFIED ON s1==:::::i

SMALL MEETING ROO []TI]

__ ......,_OUTLETS AND TV

l+- ---+t----+r---+---+-++----;+--+I POWER TO

BE ALIGNED ON WALL (CENTRED) HEIGHT FOR TV TO BE VERIFIED ON SITE

OUTLETS AND TV POWER • TO BE ALIGNED ON ~

CT[J WALL (CENTRED) HEIGHT FOR TV TO BE

VERIFIED ON SITE COPY AREA

[]}I]

OUTLET FOR PHONE AND MINI COMPUTER ( 18" AFF)

c-L----+-L--,

OWER FOR E @ 3 'AFF ~ ==±=='J

POWER FOR PHOTOCOPIER

:::'J z )> z 0 rr,

7'-0" 7'-0"

"T1 "T1 z z )> )> z z 0 0 rr,

0 rr,

FINANCE DEPARTMENT [QQ[J

POWER REQUIRED FOR COUNTER TOP PRINTER (CENTERED OVER FILING CABINET)

0

0

0

HR OFFICE []Q[J

0

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

WALL FINISH SYMBOL

I F' 1 I

I F2 I

I I F-' ' . __ )

I 11 ;-1 11,,

"

I ''1i\ /-1 '/ 1; './ I

'

' " ' ('10

C I C C C :::; -=; ~ ~ '

' )

' ------'<------------~"

!/ '· WALL PLAN I I \,.,1cso_/ SC/c.,_=-., 1./4" 1'-0" ___ _,

LEGEND DESCRIPTION FAII\T

-

I\I I'.~ I 1 I/ 1.11 U F/\'.:Tl" RC: R • SHER'/'illl \1\/ _L ;\lvl :• (, r ·1 I u \,

I I .,. , JI •.J ~ \' ~-; \/'-/ / [, ,) [1 'I I I ·/

u' '. ,, \•II ') /-\ V ._"',. I v'i I I I

~ /\Ii\ I 111 ':: I " L_

l' 1 NI IF''''TLF-F Vi\ ,_, /\·,_,, ;·=- <.: iHER/ill~ 'v\/ L II - /\-_,,_;

C'.JI ( ' j ~·' " '\ 'Ii 'c , , ....)I 1c.:c.:v\,'-/I I , \' ! '

'/ ~ \ ' ~ i/1,1 / ', !........ .,) " .. ~ .. ) "" I,) \1 V

!-'Al~, I I~ I :V I ' ' l!Al,11 IFA"Tl R=-R· I I ' ,_, ' ,..__, _; - \, SHER,,NIN ''/-/ _L ,A.Iv! c -··LrJ" (j,j ,_), \: S\/\i C55'9 (' r' \~ (' :" ----:) D V ,j ,_,. V \

(T!, -[ _,, \,/-\,-

11: ,, L v,., /\ - T LE 1 1,; ,61,1 U ~ 2,'.; I l, ~:- ~), (,I/\

\, \)

:;:=:F: E'' :::.i: ell/ ,_) '

1""1L1", JR· ..___,. \_, ,_1 '- \' r- · 'E'E \)_\' ~, I,,-, ,..--.1rry\ I\·~-:, - ,,_, ,:; .:: J

\:: ZE / " x1 --L_

,, I " I YI ' l"""'I ) " ' (·:I J I ,J \1-.)u ·/I -( 1,11, \ ' -

'" , I i \ " \.., '

1Rn T -..J \ V V 1T:L1'1 L R V• .... • V ' \, SI \•E~•\Ci', - ,' \.' ', ,j

1' !\T-E =i 1,1 • /7 r'i\/E::::;:,L,1\-) / ·,_) ,.__; ' \ ' '

\,\ ,' ') (" -, ; '/ '~ _I_) \J=-fj =-ER - - '

1/,AN 1.J FXCTl. R =-R• K1'"'1~('1C::FDI ', \ '_, ' _, ' ' LRRnR ' ' ' , ' ) \ c-F'I-" :) """\ ...... -)

c-R ' - EC• R C:CO \I JR-,' I . ,--::,,.D, \ \\/::JC] C:DLOclR \ / 1 C:: I-' 1 ,c E- --'El' E iRl=-T :=1" T) ,,11 ,, C'- ,_,I \/ ',_] """\ '_., "'-' _, '

\. \

2S' · 1 J/4"

R+E OFFICE Ccj I

R+E DEPT. I co? I

RECEPTION I OC1

\. \

R+E OFFICE R+E OFFICE I C,J4 c::i5 I

I ·_1 ; )

I :,;

, ' I

"

CJ I

;r,

IT/ ERVER ROOM .... __ ~I ' I ,,

I __,

NOTES: A L '1,/ A LL'i A\ c, r·· ,-, L , \1 ',I c; Tr·, -_, [ , ,_ YI,, ~ , . ·. J·v ..__ ,, I ._, v , p I 'IL::-c;c '·-H=-R'''' c::- ,.,,',T=-c, ._,I\ _,_.~: '.j _ ':, ,_;_ I~.._, _ ,.

) {'

SMALL MEETING ROO 1 011

-,.-,

OADD OFFICE , •. ,. I ·~· D

r• i,LL C"LI[' ',•;,,n-, ['""RC T('' E',=-·~Tl,, '1=-c·, -,,-, L. ! ', 0'.___,) -' 1/'i ,,) 1..__,1 _, ) 1..._,11, .. ) \...) ....-' - ·-' /' 1·- - I 'J

1Ji/ I CH I 'Ii\/ I ;\ I\ I; H C :1 - - ~u lvl - 'i I CJ -l ~ Pi\lfrcc 1 -';; 1 J~1_ccc CT c,1,;,;1sc r\J() I - I)_ S,Ll\,11:,1 ~ (:- \,V()()I~ c-: LI\J ~: ~-

'.ii -ll/11 f I: ~CR i'.}'~R P

3. '.:;L2,S'3 D0011S -o I Ii\\/[ VIA\L.1'/\C-.J-1[11 ST/1\D;\RD 1\\IQ[; ZE=> :\_UVI l,IJI./ FR/•J./F /Fll,I 'iH

E,-.,-c•HELL ,-,1, \_] ,_,. ,_, ,_,. ·.

MEETING ROOM I :H)li I

COPY AREA I •; I 4 I

T/

KITCHEN I Ole I

STORAGE I 11 1

jc,' , 1/4'

l9175rr_

FINANCE DEPARTMENT ,c-,7 I --'"' '

HR DEPARTMENT o 2 1

FINANCE OFFlqE I eios

)') ~

HR OFFICE I o1:: I

/

~ ' - " N N N -,. 0 -~ ~~

onespace

one team . one vision.

NO. DATE REVISIONS C' -J1\XX2D1' C'lE:< SET ,,

I. Jillri.l:' .I~ -!)-! lfN lfR

NO. DATE ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE !>ND THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

All. CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORl-4 TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

WALL FINISH PLAN

=:.t..T[

17079 Jrn- 19, 2c,·3

='LO-TED Jt.JE

1'50 Jar 19, 2C,'b

1050

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

- --\ FLOOR FINISH PLAN I

\..,_:coo/ SC/c.,_=.., 1/4" 1'-0"

FLOOR Fl NISH PLAN LEGEN D SYMBOL DESCRI PTION

-

F 1 [\/ ,:-,1,1 U ~ '' I l. ~'. - ~)

( '· I ( ,. ,,,. \.)

,,:-,1 [S /TY='[: Ll['i,L \I (cT4r:,<[C F ,, ---, -~ ' - - -- ' '

. __,, ' \ 2i ,' ,-...., \ ,,-,, - \ I / -

\ ,-lL!",JR OFF ""I-IT=- \J/:T _ Fl XI SH i I ,_, ,_, '-' '- · .. ·.i'./ -

' ' c~ ZE: " ,-1 "··; ,-1 / ,,

' L /.L '-- /

- - --l 1, I' --l 1 /-'<;.-

-p- T (,_; \ I,_) u : TE:: ---:,,~,,1\1=-F! \..;'\'!_. -p-1 T I,_:; \ ',_) ,_,

n ~) '' I", \l,)u I r· r·: I '/ '"

n l ~; I I ·• •. / ~ ' . I,\ I

- ' v~ ! .,_ I ' ,, ',./--\ JI,)

X -p ,-F' F':;, ,-1--'E [' ,,_) \ I \ \ ,,_, ,_; / En ,, L

"'1_1/ \ L--Rll 'T-/\ =-\ '/\ =-

S,A.R'ET -I_E 1 'Ji\\111-1-CTL 1'[-' \/ ' ' ·-· :-_.,, ' \ \. SI I ---,,, ,/.-4, \I'/ ,, n I T1' ,-,,---

\ .. / '-' \ \ ,I-', 'J

----i---[S/TY=[ 1[ L' T _[ -- j_< < ,A, '-/ /' '-,_ --1 0-,R: C/\7 =- 7,:::,~,.~,C) ' ~ _, \ ) ' CT ' I ' IJS IL Li\ I IC\I 11 ' I' LI I I I'

'-, / , '- '' ',/ l, \ ''----) -~ -- 3/\SE 82

.X. CJ i! 'Tr-- -r /_',, _! -· ,,'' ) \ / .' ' ' \. ,; '·' J

rn1 1'-1 ~- ,/ .1-"\ r, I "' -, -i 1,1AT1

\/ I\YI I I I /1/\II U =-/\CTI, RE R: ,\R\/CTR(',\ ('

/ \ '/ ,_) \ '<-I \ \J

::, =-R ES/TY=E: 11\/i=ER t-, L TEXTURE ,,-,,ll- 1 R-'' .~; /\ \ _)/\ \_)

1" -'\_ :"''1U"1 I)· h - ('nn ""'"'L \/111 I I L 0 (:,:j::) I ( II 1 ,,.,

' I ' ~·u '-' u , .. '-''-''-'

I ; /I I >" x1 ,", " ' J '·-, / '- / ---- =1AC:E-B,3 _,, ,,_. .

! () I-! _A,I )1),"";('1\/- I) f ('1 l i\ I \ \ , ' '" , .1--s,

r-I H ~ I I. ,· \ µ I ~

lJ138rnmJ

R+E OFFICE I IJCj

I

R+E DEPT. I ,x:7 I

F-S

RE :E PTION I

E',--E -11 I f .. '-' _\_, \

\'

R+E OFFICE

CD

/-- --"\

( CT I

\, ____ _//

I

I

I

I ~

I ,_ ----

I\/

u

R+E OFFICE I OC5

[: '!ECTIO'J OF C!-,RF'ET =ir,,,-TE'< J

~ ' -

SMALL MEETING ROO I : 17 I

I\/

OADD OFFICE

I '"/

I

FLOOR BASE LEGEND SYMBOL

/"­/ =:',/ \--~

DESCRIPTION

, ' I ' I ' I I,; )- i\

- c- 2 p- -BE--~ ·-=- : ',u::C - '\

I I

'- 1i'JG' / \ ' ,. , \ /

'~ ,,/

\Jtl~ 1_1 =-tCTIJ RFR: ,, JH \JSC \ 1-F S[rci cc: TIG TL~CK [lLS[

C:C:LC)l._,R: 11S CR[Y V-/C;

REFER TO JETIIL

--lL,S~ j ~:J--l--l~ -; I.I /J-1 U F /\'. Tl/RE R: I CJ I-f-1 '.:1 CJ I, -E c;=-p ES /TY='E: TR/\DI-ICJ~J.L v';/\LL B/SC: - - . . :

I-~ IC-j I ,1

l':L,)L\/ ''i'' , ,-I ·· .. I I ',1\ 1 I, J

R=-FE-, T10' DE-''-IL· - \ ,_; ; :--',, .

MEETING ROOM I o::G I

ALIC\l -ILE Fr,:;=- \i-/Tf---\'\i.:\L_

-,,

I

H

' '

'

-/- "\

,j'.)' 1 1/L"

= FE:-1cr, OF ::,t,F=1ET =i1,_-TB'<l

'. ( 1 ) FINANCE DEPARTMENT ~---/ I OD7 I

HR DEPARTMENT I UI L I

f h '-~~/;------c1---+------"-c:---+---k:--____c_(( - I / ) I

1\LIG\I -ILE~~--+---­cc::-;= \N'.Tl KITCHEN ff-. ) '.r) _jJJ----+~ \i\/A,L _ ___:_

I :u I

/'/ - -,

I,, -1 '

/ ,,, - / -

TJ

lJ I_

---

I

[E] STORAGE

I ,J11

' ----

J ~

l '<F1TIO~ OF =i~T -TEF'J

FLOOR TRANSITION STRIP LEGEND SYMBOL DESCRIPTION

I Ri\lJI'/ 11:;1,1 :, RIP '

,·c,c--T,-- - ,--,,--,,, T-- ,_ 'J,,1T--'J c,c-1:1 -1·( I < v 1 _uul\ \Al'-=:: ul\ ~

T'i A l1J C: Tl 1: ' 1 c:-,, n ') I\, , ,_, ..__. \J ,_, I\ I - L

C'E:OIE'' ::,El,,, TK .~J \ :~, : \ .\J I,_) \

(() '.JU !: AN'.;IJI/ IJ .A U.;111\UJI

RF=-FR T,,, F --1r=i TR,1·-1-1 c: Tl<''' r:,F- -,II ._ -,, \,,J\ \t\\L, ,J\J _, ,

I FINANCE OFFICE

C08 I I

HR OFFICE "",' I ,_,1__,::, '

HR OFFICE 0 D I

1" C: \ i . ) \

,­N "-' I N -/

3 -·--, '

onespace

one team . one vision.

NO, DATE REVISIONS C' -J1\XX2D1' C-jE:< SET ,_

?-llii.C' .17 0 ,,, TFlflFR

1. /U1 .. 1/.U,~

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

FLOOR FINISH PLAN

=:.t..T[

17079 Jrn· 19, 2C'8

='LO-TED Jt.JE

1/4' • 1'-0' Jar 19, 2C,'b

1060

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COMkff-f! IC

1\RCI I. l)k,~\'V f\LS FCR \N/\I AGSlVl~LY.

f---1,f\ll,J ~) ~ VvOAI I :::)\/ < \JC; II\IISI ,tDC\/= T -= ].A,S[

/ FL.AT -R/i·JSTCI-. I "I->-' ('·~J!'l'l 1 '1' ,J \ \ f---\.1' u .J I I ,'

i\l l •• 'vll•Jl.lvl =1"ISH;

f':J 1CLLi'. 'J ILL 0/\S[ i\S ~=R f'JSH lf'.:H-.J

/-G~Cl_,T

I 'CkCl_. 6.II\ I l_c I I ;)C ~

( 1 .\ TILE BASE DETAIL

~----------C/\\=:)[T Ill'~ S I

L TRAl,51- ::H SF'.11' --Tl_c =Loo=, =11\ISf-

-~

' I -c::;:::: I -i ·. ·. ·. ·. · .. ·. i · ... ·. ·. · .. ·. i · .•. I I I I. i I'. I I. i I'. I I 1 '·---

1

. . ' .

. ,.. -· ·-,.. . . . . . . "

•

:.1>, 17 ·. l .

.. b

. . <I' 'j -

I I \If ~) - -x1•; 111,::

1~·\ TRANSITION DETAIL ' \ I/Jr.I I SC/,L=- - [~ s ~.:_'./

17

. I>

I>

V

·. ~-·v

f!f ff -/ I CJ /\l<CI

F~1R \/1/i\ I

V ;_

17 I>

' ' ' '

' ' ' ' '

' ' ' ' ' '

=11\1=,-ED ~:A-ITf---1 -IC)(-'(

-. - ___ ) _____________________________ _ i I ' I ) I ) I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I f

,1 \ 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I 'I I'\ I'\ I '1 I

. I> ·I>

I>

( 2 '\, BASE DETAIL - RUBBER BASE ON CARPET 1\,106'_) S::'.i\U:. - \IIS

..-s .\, TRANSITION DETAIL \ li''i:i' / S::::i\LE - \ITS "" _, / , ___ /

~----------Ci\~FET =11"1S­

-~Mf,: TICI\ '',-Rli'

L -

VCT =LOCR =11.11s~

_ I-._ Cl LXIG 11,.G T-.ISI =:i ,LOOC:

-;cf le: .4.RCI .

I c:1:; \N,4.

.. V

/\.SScVIE_Y

I>

·v

1 3 \ RUBBER BASE DETAIL ··<-~_!) 2 ~1\Ll - f\J I ::i

\ \ \ \" \ . -..

. I> .

onespace

one team. one vision.

NO. DATE REVISIONS C • -J1\XX2D1' C"E:< SET C.•

1. JCllri.i:· .1 / -:J-! lfN lfR

NO. DATE ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE !>ND THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE Of WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

All. CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

FLOOR FINISH DETAILS

=:,\T[

17079 Jrn· 19, 2C·'t,

='LO-TED Jt.JE

NTS Jar 19, 2C,'b

1061

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

--{/:.,~'

=: E L I\ G ---------lr-+-~

' .

, _ I • r' 1 / ,, -,-v~ :~::: ,_) •.j - / 1)2,

_ hi:: C =- CO :JR ------if---'l------- -----' ,,

I -----++--------- 1--,-+' -~\------++-1r-+C C VI I·./ lJ \I I Ci\T Ci\ S C)P1I\ =>csl-lC)\

(El',SUPE -v IS I I

C--1---1

·~ # -----t I I '-i

/ \ Cll,TI ,T I \

I \ I \

-'U LI-' I :JI: I I ., I \ TV. I

I I I I I I

RUl8lR 8ASl---- I I I

-_l_ :_-::.:

- _l_ 0 CD _ l­~,

1-'i >· :-

. "

I LJ f­

:=: en

(;\ INTERIOR ELEVATION - RECEPTION c:::;1~-r,,1 =- 1 /'l" - 1 '_,-·," .• ,,:--s_ I / ,_,

T Ei.R ------½++-­

c:-111 ·i c:

/ /

I \ I \

< \ I

\ I \ I

\ I \ I

\ I \ I

\ I -

/ ' > > ,, EC)

,

r,--, n ,--, r,- "- , n

\'VORKSltTIC\JS

I< I l.ASI

II I TO Ui· p -,<:-• D- '.JI \i,\N II I T-B.AR 1 CEl_l•IC .. II 'r r=======r - -+0-- 11 I I I ·.1 11 I I ' ,, I II I I I '

• I .o I II I - 1 I 11

I • I ' II ,, '

II II

I II r=======r - - - 11 I I II I ', I II I ·,0 I II I -

1

I 11 I ' , I 11

'

(/,,\ INTERIOR ELEVATION - FINANCE DEPARTMENT '. 1 "U 1 ·, __ ,~_,/ ~; CA.I =-· 1 ,,/?" = 1 ' - ~-_:,"

I I II I II II I I II I

I I I I I I I

I 11 . I 11 r=======r---11 •.D r=======r---11

I

I _ I II :..J I ~ I II I '- I II I ', I II

-

I ·,o I II I :D I II I - I 11 I - I I I ' , I 11 , I ' , I I

' ,, '

t .

['-''"' ....

, , _

- • - " p Y ' 0 r C -+--------- -----' ' T ' • :J/ ,j _ '.,,1/ ,,_)IV I 1--~-+--~--------+H--

8AC K r-1c I 1 , I · -. ,, 1 -t,"

=, C) 11'! I ~~, I< T.\/

'+:--¾- - -+ - - 11 - - -1- ~ I , , I !1 I ''"

< 1' I - - .::P/ ' ,_,, I ~===±===== ' ~fi _l__ (_)

" '.l:'.: -_I ~I 1_[: 5-

')J L f-

Cl ,:r;

-'U\/1/LI< I ::__:11Z 1 --l'._il\l /\~ U /I 'II :.:::vlF'L.T,c:

'+-- -'I.--' ~ ~ l

,-------, I -_ I I i _1 I I 'r,. D ·.J I

RUlllR lASl---- I :,c I

=,C II'! -::,-,~ \-V'.J~<STATl'.J~~S 1'6" ,L.f- ,.-. YI ., • J

I - I I -. I • • I

' " "

L \ INTERIOR ELEVATION - MEETING ROOM '\1C/O /

·, _ _/

- [-l..,\R ------+--~

C: I I ~IC

Er (+: .,,

=oo·-NER =-:Jp T.V. --1+-"--------~ 1'

• ~ /

0 ,y 'I

oL LJ ~-=:: LC_)

- C:::: C_) I IT

I >= - ~~

C) u:, I -~

II II II

LJ c::===--:::i

\ I

\\ \\

1, / j ~ 'cD'r,. c;::::. 11===,.)\\

11 . I/ \\ JL • II \I ,,

(-4 \ INTERIOR ELEVATION - SMALL MEETING ROOM I\ '·J/C• /

'-, ___ / F: I - ' ' = -1.,'

' ,

C:'.)l'·il'vlU•I l'.HS CUT _E-

CU I-=-- .A.=lC\/t_ C'?[C[I\Z/\

:~Ol'./lvl.ll\ :~1\TJC;I\I',• 01.!T =-T

:J.!T_C:T ./\T l'fi" l.ff

onespace

one team. one vision.

NO. DATE REVISIONS C' -J1\XX2D1' C'lE:< SET ·-·

1. JCllri.l:' .1 / -:H lfN lfR

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

INTERIOR ELEVATIONS

=:,\T[

17079 Jrn- 19, 2C'8

='LO-TED Jt.JE

1/2' • 1'-0' Jar 19, 2C,'b

1070

4'-0

"

2'-6"

5'-6

"

DIM

.T

O B

E V

ER

IF

IE

D W

IT

H

P

HO

TO

CO

PIE

R W

IT

H T

OP

U

P

1'-10" 2'-6" 1'-10"

6'-0"1" 1"

1'-6

"

MIN

.

1'-6" 1'-6" 1'-6" 1'-6"

8'-6

"

3'-0

"

TO

S

UIT

CO

UN

TE

R H

T.

1'-6

"

1'-2"

2"

2"1'-9"1'-1"

3'-0"

1'-6"

3'-0"

1'-2" 1'-2"

3'-6"

FRIDGE(NIC)

DISHWASHER(NIC)

2'-6"1" 2"

2'-9"

0"

3'-0"

2'-0"

2'-4"

1'-5"2"

1'-6"

1"

2'-2"

1'-6

"

3'-0

"

9"

4"

3'-0

"

2'-5"

1'-6

"

3'-0

"

4'-0"

5'-0"

3'-0"

2'-9" 6'-2"

9" 1'-5"

3'-10"

6'-2"EQ EQ

3'-4"

3'-6"

5'-6"+

/-

HE

IG

HT

T

O B

E V

ER

IF

IE

D O

N S

IT

E

EQ EQ

4"

1'-6"

1'-0"

TO

R

OD

2'-0" 1'-6"

3'-10"

2"

1"

·

·

4"

2'-6"

1'-6"

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

MILLWORK SYMBOL

~,

( f-'I I) \ /

!~ / \ < Iii I) \ ,/

I H '" '.'<_1-

I -vv- I

I -iv- .. , I

,~. (Fl\ \ __ /

; \,

/ \ ") \ ·~ I

'~'

' '

FINISHES LEGEND DESCRIPTION

1)LASTIC LA,IJlll,.ATE f 1 (CJ.Jl,1-C:R) lvlL.\U-ASTUR=R• -CJRVIIC.6 C-:01 Ol,R· rl .. A.S,l, - ·-~ ,D,T- ~c;.qr, ,~4 f-1\ISH SC:C\/J\. '.) -I\Jl'.-i-

PLASTIC LAJ;lll,.ATE #2 '

lvlL.\U-ACTUR=1,1 -JRVIIC.6 COLOl_,I\: ~,J=\,V V\/1 II-= 7CC,3C-5f, srJI - ::c 0JR' CC)\I ? f-1\ISH l;l;\11 f- -I\JISH

l.;l-1 /\Iii I II, f I l,;IA\U-;'I<; I lJk-k; ulJ H'.>A.k; COLOLF, 3CO CL!.SS C H -E f-1\l~;H; !VIAi I l SU1)1)LIEF( -L \I \;IJDC:'.cTll\10 COI\J-,D.CT: C~ Ci '~1. 7C~ ::, . 9 462

HAC;[)',i'JAF,E fr' - CA.BI~:::- 1)UL_ lvlL\U-ACTl!R=1,; 1 :1 i=u=u STVL=• G:'/J:)2D PULL f-1 \IS H HR l. ,• - f-I) \IC: K - I

PRODUCT # G:;D!J2D 12811J :?\/

H/\--(1)\'\'/\~:~ #) '

/\SI~//~·~ c:v~:I - /\SS~ l\,1---3 Y lvlA\U-/\<:IUk-k; -A--1 f-ST''LC: E.JRJ ~ RGO (COl!lr' _ETE Vi TH 311JS)

SI/

1-/.RlYN/ .. k=- f:C 1\LJ~S 1\bLl 1/,t:iLl LlG 1)//JL.f- lkf-·; f-!ICHf-1 f-U STY_E :'AF -EIGHT TABLE LEC F I.IISH; SA-I\I :cH~:OlvlC:

-;\l.C[T \/li\l~l,f- ,luRf-k; ;\\/fkl'.' \J :-; /\\1)/\RIJ \/1:;J-I 1 ;.:;: C)/1'.)U;J kf-1 1\1'-JI & :)l,J(;lf-H/NCLE =-/\UCET - I (,I •, - I () L c1 - l L: c- c; \_; \/ l

K CH-\ SII\K IVA\U=-ACTURER; =-RANKE 1/Cl;I I iSfi'lOS 1 ' I ()I

f-1\ISH \JAN f-'-'- ';lf-f-

CCA.1 ROI)

~---r-+- CLOSET S-::LF

J

( , \ CLOSET PLAN \ 1:J2J / SC.AL - 1/2"=1'<( '--__ /

~~~"~ r-------------, F

- -~-u_O_

,I

VERl"Y SIZE V/ITI I (J'vVI·~=<

l<T~-Efl

l;\s f I fii BELCVV

'

' lfl -VISIC\ 8 Y O '/v' 1--~ :=:: ::;;

-,

/-- 1 '1 KITCHEN AND COPY AREA FLOOR PLAN \1]20_/ SC.t-.11 - 1/7';_1'-•]

... ____ /

\~CJLIJ\11'1 J[VC[~D

(-;-, KITCHEN ELEVATION

\,:_ut'?/ SC.At= - '/2 '= 1'-:J"

I ' ' ' ' \'1/-

FI_LEF! PXE_ -

I ,,,I /'\ 1 I / I I / , I

: / :: / \ : I / 11 1 \. I :c:~===:::i: :c:~ =========~:::i: I I I I / ' I 111 Ii,/ \,1

" ' I\ I I\ 1-'l I , I I , ,, I

lc:::":;;;===:::il le:-=========~::,: I ' I I " I I \ II \ / I I , I I , I I

'I ' I I ' l J , ' I 'I I ' " I L------ '--- --- -------'

r-- -- -----, r--- , - ,----, ' , : , ' ' ' ' ', ' ' , ' , ~/

' ' ' ' ',J I\ ,'1

: ', / : I , ,, I

' , ' : ',, ,,," : L __ --V-----J L _______ ...J

C - __ ,.?7',t\, ' ---- ,, - ' , ' , ' , ', , ' , '

/ \ , ' , ' , ' r 'f \ t>

\. /'I ' , ' , ' ,

\, ,/

' / ' , ' , ' , ' , \\ //

L _____ -----,~~-----------

' ' ' ' ' ' ' ' ' ' ,- - - ---, -

' ' ' ' I i I ' ' - ' ' L _____________ .J

-------+---+-f-----+- DIS HV/.A.S-ER

IP"['? C/\0 hl[TS

I

C:XTER ::;p 61\SE C/\B I\ET ~;,_,f-,f-ACl1• U b=-

=><T[R CC:: I ::o::o-, CI\Illf,[T SuR11\C1 TC n,1

- 1 ul I H!.kl)'i'!/\Rf- I'.; -lf-1

WASTE C~AW:=:R ~A~JWARE TO [[

/\_L SHC:_\/ES TJ BE AJJLSTAB_E ON RC:::::ESSC:J

11 :--11

I '1'-'/-2 I

vi=-AL F' L/\.':-=Rs •NIT CLIPS.

A I Cf-)f-l\l Nc;s -()fi /.f-1 f-11 /I"-!(-,. TO BE \/C:P =-1:::J Vi TH OV{\ER =ic; :::c; -(J l\!A\1_1=-AC:TLF;I\C;

,------------------, ' ! ' ' ', ' ' ' ' ' '

' ------------------~

/-;-~ / - \

r1·000! I "--j

I I

I

I

I

I

I

I

I

I

11,,,,_,I \' "

--1

I

I

I

I

I

I

I

I

I

I

FILLC:R PA\EL

, ----------]

/-,--,., CABINET DRAWERS FRONT ELEVATION · ,c.,._c- 1"=''-0" \"':::,s:::' ~ , _____ /

,------:..~"' :::------, ' /1 I ., \ 11 /1 1', I I.,,/ ',, ii FIi I\ II /II' I 1,.-" '-,II /'III\ II /'11', I 1,..,...- ', I I ,, I I / ' I I ,, I I , I

, I / 11 ,, \ 11 /' 11 ', I 1'', ...... --1 ic:=T-====:::i: :c:~========-::ii ic:=T-====:::i: ic:======:.=:::i: I ', _...- I I,/ 11/ ,11 ,," 11 ', I

' ', / ' y '' ~, " ' L------~~ .. ,,.::-::.. _____ J 1, :i , 1 1 ,,. r---------, I', 11\ /I ', /' I I I lc:=~====:::il le:~========-::ii c:=~====:::i c:====~=:::i: I I I ', 11 ' / I ', ,,-' I

I ' I I ' / I ' -' I I I I ' 11 \ / I ' / I 'I ', I I , l J,' I I ', 111 'I / , I I I ___ ,,1 I ' I I ' ~ I 1/ I 1 ,r, L. ""'--------v---- _.J '--------- ________ ....

-- +- -+-fl fk 'e.Nfl

- - +- ---+-CC_UHhl cEv2·c

--- +- ---+- t:3.A.: f< ::;i )LAS ---j ~ ~ ~~~~~~~=====! = 1__,J_ __ ---jll' if' v 1 ·" - LC j 1 r-1---?l~i~-- I -1 '·. ., L ; I I I I -' ' I I L _J I L-::,-..:, _____ .:.., I

r---:---:-- -, I ,,. ' I I 1 1 / , I I I I / , I L _J ,, '

r---:---:-- 1 r-,, /1 m I I I , / I

L=~ =~~: ',, / I i i I ' / : I I I ', ,/ I L _J L _____ _..,..,, _____ .J

--- ---- ---i f---+-- ,1 __ rn ° eJI c L

/ /

( ,',\ KITCHEN ELEVATION ' . 1~_?_~~-) SC:AI - - - // "-1 '-Cf

[X-[RclCl"i :?LS[ CA[ IJ=­SU~'.I.P.c=s TC1 G[:

f-X f-kl'.Jk "f-1f-1f-R C!\-l \J­SU~F.A.C:=: -c ~:=:.

I\T[RIOR Sl.R,Ac=:c TO [[

n/\CKSPI ~11 TO n,

;\L_ SHlLi=-S U t:i=-AU~US IA~L~ ~\ Rlc~ssl~ lvl:C:T/\._ 1)1_/l'.cTEC;S \/,;ITI- CL 1<:•.

'L-

.4.I e;::o=-r~l~JGS FCR t.='F'I IAI\CFS I() Ill \ii Ill 11; vVI C;\Nl\l ll

I ) k I Uk I Cl li1A111.J - ,i\'.; I lJ •; 1'-J :;

U\L=-'..:S C '1l-;; VVISl \CI =-U:

COU\TERT01) TC ElE; 'F'L-1> C0Vll'/Ul,I C/.TIOl~S cu _ll

·1

~I~ P'.)\1/ I< I :: I~ I·'

- \i 1 L(,,111 ! !TE, __ (PL-1)1

1'-'v.._, I LI\/ , 1 \

, _/ (~~·~)

' \ /

{ ' ' , r" I I

I OUTI "T AB8\iE -,, ' -

,'-\ =:i _=-LJLC~-<lflG ,,:_'

,'--'s__]

,_ -------1 F!EC._,IRE::1

' '

/---,., : 4 \ KITCHEN EATING AREA ELEVATION \ 1,-,,ri / s:ALC - 1/2"=''-o" \..,_:::-_-,/

I

.. AS.TE

/

'

(~ 0~-,\ CABINET DRAWER FRONT ELEVATION \1cso/ s::::ALC - 1--/2"=1·-o"

... , __ _,/

'.'.' '

, 'I '

I / ', l 1 / ', I I ,,. ' I I ,, ' I I ,,, ', I I ,,." ', I I ,," ', I I ,," ', I

11: ,,, ,, I I ,," ,, : 11111 " ' : : ,,. ' I

I ,," ', I I ,," ', I

~~==================~ ~======= ==========~t I', /'II', ,,,,. I

Il l , ,, I I , ,, I 111 ' ,,. I I ' _.. I 1111

: ',, ,,.,,.' ii ',, ,,,,." "', >--+- - _Llr\ I ' ,, I I ' .,/ I I - ' \ I I F LLE~' +-+-- --+ 11 ', I . ,,., 11 ', . I ,,,,. I ,·'/\ \ I ' ~ " 11 ' !!/ I ~1/'J~I I 1' 11'------- , .../---------' I~----~ ---------'

/ / '<-- ---------

PHC-CCDPIEF: LJV Ji I Ll,S

'.JIJILcl ----)cvvE::;:

[i] ~ '

/ / /

COPY AREA ELEVATION

CABINET PULL

ROUTER 1" HIGH ARIAL FONT LETIERS

"WASTE" "RECYCLE"

(REFER TO ELEVATION FOR QTY OF EACH WORD)

/

[\'.-[RIOR [;\S[ C;\[11\l[T 'L-SlJkf- -', 0 Hf-

T:'', -, - . ..._, _,_,

VI -

BLCKS1JLAS-j TO BE;

F'i!_L A.R DV-/A.R = -::J ~-<, •

IJk.1\\i\i- ,: H/\.kl~\i\//\-?~ I CJ Hf-;

B.L.':C: -c: SU T FLO::R

;\I ',1-f- \;-,: 10 Hf-ADJUSTABLC: C\ RC:CC:SSEC l!IE-A.L 1)1L/\STE0;'.:; ITH :::Lli)S.

/\I ::=1r,~ ~1c;s -:J< l\F'F'I /\\J:IS ICJ Hf- /f-k f-lf-; •NII- C-Nl·J-k I' RIC R I () lvl/.l\ U f " I UR I ~Jc;

onespace

one team . one vision.

NO, DATE REVISIONS ,s. ·J 1 XXX2D 1 CHEC< SE-,_.

1 . /'Ufr\.C' . 1 / - '.) ,: I f-N )H-\

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE AND THEY ARE NOT TO BE REPRODUCED IN WHOLE OR IN PART WITHOUT WRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEh.lENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONfORt.4 TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\IT

SURREY PLACE CENTRE

ADDRESS 777 Bay street Toronto, Ontario

DR.t-.\'il\C;

MILLWORK DETAILS

=:,\T[

17079 .Jar, 19, 2C 8

AS NOTED -Jor 19, 2C b

1080

1"

1"

2"

1'-3"

3'-0

"

3'-0"

3"

2'-1"

1"

2"

4"

3"

6"

1'-6"

1'-0"

(CENTRE)

4"

EQ

.E

Q.

EQ

.E

Q.

2'-1"

3'-0"

3"

4"

2'-1"

3'-0

"

3'-0

"

2'-0"

4"

3"

2'-1"

3'-0"

2'-0"

2'-1"

4"

3"

MIN.

1"

2"

1"

3"

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

LAMINATE COUNTER.

' >< , REFER TO ELEVATION

- =- - -----------',,---" 1/"'1'. I '/ FOR FINISH

/

-~ ""'·'"'"" '"'" ~----------- -,11_ TO BE: I HW-1 I

DRAWERS ON FULL likaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa~~ ---_-_---:-~ -- EXTENSION METAL DRAWER

SLIDES -r---------: :.: ====:jjk ,,,-__:_' __ INTERIOR SURFACES TO BE:

~

I

---------. I I ', I

LINE OF FINISHED FLOOR

/ · ' SECTION - DRAWER CABINET ·_1 <.;,_-·-_,,_,_-\ 1001 - --- '/2" 1 ,:_/ ,,- /

LINE OF FINISHED FLOOR

/ s ' SECTION - WASTE BINS

I

I

UNLESS OTHERWISE NOTED ON ELEVATIONS

RECESSED BASE TO SUIT FLOOR FINISH

LAMINATE COUNTER SELF EDGED TO MATCH COUNTERTOP

(TYP .)CABINET PULLS

TO BE: I HW-1 I

FULL EXTENSION HEAVY DUTY METAL SLIDES

CUTOUT TO WEDGE REFUSE CONTAINER

'--tt- -tttt----1NSTALL WITH LID

.,_-tttt----1 HW-2 I IIII _______ INTERIOR SURFACES TO BE

~__, .\

RECESSED BASE TO SUIT FLOOR FINISH

, ,,;- LAMINATE ' ~ COUNTERTOP.

SELF EDGED

I _:::>-<::-

/-s-"\ DETAIL - COUNTER EDGE \ 11_li:i1 / SC/-.L=- (" u ... -

:.; -~-, ---). /\ -"---- 1/2" REVEAL TO

MATCH EXTERIOR CABINET LAMINATE

~FINISH

CABINET HARDWARE AS PER ELEVATIONS

. -

LAMINATE COUNTER. REFER TO ELEVATION FOR FINISH

(TYP.)CABINET PULLS

TO BE: I HW-1 I

NEW SINK & FITIINGS s-I

- --------t tt- --- INTERIOR SURFACES TO BE:

LINE OF FINISHED FLOOR

SECTION - SINK CABINET S:::AU:. , _/'j_'' 1' :Y'

_) ,,,,-

I

j ' .

. .

'~ ~ 12"

........, MIN . CLEAR INTERIOR DIMENSION

/-;;-"\ SECTION - UPPER CABINET ' '

UNLESS OTHERWISE NOTED ON ELEVATIONS

RECESSED BASE TO SUIT FLOOR FINISH

FRENCH CLEAT, PROVIDE CONTINUOUS BLOCKING AS REQUIRED

INTERIOR SURFACES TO BE

ADJUSTABLE SHELF ON METAL STANDARDS WITH CLIPS

""~ CABINET PULLS TO BE: I HW-1 I

LINE OF FINISHED FLOOR '

/- --........ f 9 \ DETAIL - TOE KICK I 1''"' I s:::,'\LC .5"_1· J'' \" ... ',, ,, ,./

-I

. - ----------_ -

LINE OF FINISHED FLOOR

LAMINATE COUNTER SELF EDGED TO MATCH COUNTERTOP

_.----

I -

-

I

1-1111,'=;r--- CABINET PULLS

AS PER ELEVATIONS

/

(1) ADJUSTABLE SHELF ON METAL STANDARDS WITH CLIPS, TO MATCH INTERIOR FINISH AS PER ELEVATIONS

CABINET EXTERIOR lllf-------SURFACES AS PER

ELEVATIONS

CABINET INTERIOR SURFACES AND - r-1 11t1-----GABLES TO BE: UNLESS

OTHERWISE NOTED ON ELEVATIONS --,,

- RECESSED BASE TO SUITE FLOOR

1-----------

------

/·:·-._ SECTION - CABINET WITH SHELF i' .J '1

\~-~·_'./ SCAL=- 1' :"

_,,..---- LAMINATE - -_ - /k---"___ SURFACE = COUNTER.

: 1·>·,;. · REFER TO

-----

I

r-------+ ·---------------- -. --- "----, ELEVATION

~ -- \ /-~-\OR FINISH

DISHWASHER (NIC)

SECTION - LOWER CABINET• DISHWASHER SC/L=- - 1-1/2"=1'-(1'·

\ 108 I) Sll,I '---__ ,,

SIZE OF i ---------- DISHWASHER

_..,r TO BE VERIFIED WITH OWNER

LINE OF FINISHED FLOOR

.,,------ WHERE BACKSPLASH IS INDICATED ON ELEVATION, SILICONE BOTTOM OF TILE AT COUNTER, DO NOT GROUT.

(·; ;,_ DETIAL - COUNTER WALL '- 11·r.;·,, SC,'\L=- J"-1' :} '---~-/

'

'

/ '" ( l \

\.'._·~,-~)

SECTION - CLOSET SHELF s:::;,u_ 1 1 '-1

DEPTH TO ALIGN WITH LOWER CABINET

PROVIDE CONTINUOUS -- BLOCKING AS REQUIRED

TOP OF SHELF @

~-1 1/4" CHROME COAT ROD

------- --41f--lNTERIOR SURFACES TO BE

- -- ++ ------- -+ti-- FRENCH CLEAT, PROVIDE CONTINUOUS BLOCKING AS REQUIRED

FRIDGE (NIC)

---,,'--ADJUSTABLE SHELF ON METAL STAN DAROS WITH CLIPS

= CABINET PULLS

- TO BE: I HW-1 I

/-;;\ SECTION - UPPER CABINET ABOVE FRIDGE ' ' \, 1,:~-~') SCi\L=- - 1-'/2"=1'-o"

'-....._ ___ ,,

LAMINATE ~- l COUNTERTOP. ~ ::::::::::::::::::::::::::::::::::::::::::::::::~

1

- S ELF ED G ED

-- -- ~· 1 I -------11 Ii/ 3 I

/·. ;·\ DETIAL - COUNTER SELF EDGED \1C·!::1·) SCi\L=- S::."-1' ,:i''

,,_/

onespace

one team . one vision.

NO. DATE REVISIONS C • -J1\XX2D1' C"lE:< SET ,_.

1. JCllri.1:- .1 / -:J-! lfN lfR

NO. DATE ISSUED

All. DRAWINGS ARE THE PROPERTY OF ONESPACE !>ND THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE Of WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

All. CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME.

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

MILLWORK DETAILS

17079

AS NOTED

=:,\T[

Jrn·

='LO-TED Jt.JE

Jar 19, 2c, b

1081

TYPETYPE

HEADERJAMB

RO

LL

ER

C

AT

CH

SCREEN

GLAZING/

Door No.

RELOC.EXIST.NEWRELOC.EXIST.NEW ELEV.

CO

MB

IN

AT

IO

N L

OC

K

DO

OR

S

IL

EN

CE

R

CA

RD

R

EA

DE

R

LO

CK

S

ET

DE

AD

B

OL

T

LA

TC

HS

ET

LABEL

FIRE

FRAME

TYPE FIN.MAT.TYPEFIN.MAT.TYPETHICKHEIGHTWIDTH

DOOR LOCATION

GROUND FLOOR

REMARKS

02

-- C--

R+E OFFICE TO R+E DEPT.

---- ---- --

04GL

-- C-- ---- ---- --

05

---- ---- -- --

06 CORRIDOR TO FINANCE DEPT.

--

--

--

--

-- --

---- --

---- --

--

--

---- --

--

--

--

-- --

-- --

-- --

-- --

-- --

3'-2"

GL

CORRIDOR TO MEETING ROOM

--

07 FINANCE DEPT. TO FINANCE OFFICE

C

08 CORRIDOR TO HR DEPT.

-- -- --

01 RECEPTION TO R&E DEPT.

-- -- -- -- --

AL

-- --

03

--

C

-- -- -- -- -- --

10

---- ---- ---- --

12

-- D-- ---- ---- --

13

---- ---- -- --

14 CORRIDOR TO IT/SERVICE ROOM

--

--

--

--

---- --

---- --

--

--

--

---- --

-- --

-- --

-- --

-- --

PT

PT

CORRIDOR TO SMALL MEETING RM

CORRIDOR TO OADD OFFICE

--

15 COAT CLOSET IN RECEPTION

B

E

11 HR DEPT. TO STORAGE

--

A

-- -- -- -- -- --

HM

HM

HM

-- -- ---- -- --

09 HR DEPT. TO HR OFFICE

-- -- --

--

16 CORRIDOR TO OFFICE MAIN ENTRANCE

HR DEPT. TO HR OFFICE

--

--

--

--

2 - 2'-6"

-- -- -- -- -- -- -- -- -- -- -- ----

4'-0"

3'-2"

3'-2"

3'-2"

3'-2"

3'-2"

3'-2"

3'-2"

3'-2"

3'-2"

3'-2"

3'

7'

1.5"

3'-2"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

1.5"

C

GL

GL

GL

GL

HW

GL

GL

HW

HW

--

GL

GL

GL

GL

GL

GL

STAIN

STAIN

STAIN

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

7'

7'

7'

7'

7'

7'

7'

7'

7'

7'

7'

7'

7'

7'

PF

PT

HW - HOLLOW WOOD GL - GLASS PT - PAINT FINISH

--

17 CORRIDOR TO OFFICE

--

-- -- -- -- -- -- -- -- -- -- -- ---- -- -- --

WA

LL

S

TO

P

C

CGL GL

CGL GL

CGL GL

CGL GL

C

GL GL

PF - PRE-FINISH HM - HOLLOW METAL AL - ALUMINUM

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

AL

PF

SLIDING DOOR

R+E OFFICE TO R+E DEPT.

R+E OFFICE TO R+E DEPT.

TYPE A

SINGLE HOLLOW

WOOD DOOR

TYPE B

SINGLE HOLLOW

WOOD DOOR

TYPE C

SINGLE GLASS

WITH HOLLOW METAL

FRAME DOOR

TYPE D

SINGLE SLIDING

TEMPERED GLASS

DOOR

TYPE E

DOUBLE HOLLOW

WOOD DOOR

TYPE A

TYPE D

TYPE B

TYPE C

SCREEN

GLAZING/

Door No.

RELOC.EXIST.NEWRELOC.EXIST.NEW ELEV.

FRAME

TYPE FIN.MAT.TYPEFIN.MAT.TYPETHICKHEIGHTWIDTH

DOOR LOCATION

GROUND FLOOR

02

---- ---- --

PF

04GL

-- B-- ---- --

05

---- ---- --

06

-- -- ---- ---- --

-- --

-- --

-- --GL

CORRIDOR TO MEETING ROOM

01

-- -- -- -- --

AL

03

-- -- -- -- --

R+E OFFICE TO R+E DEPT.

R+E OFFICE TO R+E DEPT.

--

--

7'-4"

1.5"

6'-2"

1.5"

1.5"

1.5"

1.5"

1.5"

A

GL - GLASS

GL

GL

GL

GL

GL

GL

--

--

7'

7'

7'

7'

HR DEPT. TO HR OFFICE

HR DEPT. TO HR OFFICE

6'-2"

6'-2"

6'-2"

6'-2"

A

A

D

D

GL GL

GL GL

PF - PRE-FINISHED

PF

PF

PF

PF

PF

07

-- -- ---- ---- --1.5"7'

CORRIDOR TO SMALL MEETING RM4'-9"

EGL GL

PF

AL - ALUMINUM

AL

AL

AL

AL

AL

AL

FINANCE OFFICE TO FINANCE DEPT.08

-- -- -- -- --

AL

-- 1.5"

5'-9"

C --GL GL

PF

R+E OFFICE TO R+E DEPT.

FINANCE OFFICE TO FINANCE DEPT.09

-- -- -- -- --

AL

-- 1.5"

7'-4"

B --GL GL

PF

FINANCE DEPT. TO HR DEPT.11

-- -- -- -- --

AL

-- 1.5"

13'-11 "

F --4'-0"GL GL

PF

7'

4'-0"

2'-10"

2'-10"

FINANCE DEPT. TO HR. DEPT.10

-- -- -- -- --

AL

-- 1.5"

10'-0"

G --4'-0"GL GL

PF

7/8

SANDBLASTED WINDOW

FILM DESIGN

1. REFER TO FINISHES PLAN LEGEND 1050 FOR PAINT FINISH SPECIFICATIONS.2. ALL HARDWARE TO BE BRUSHED STAINLESS. WHERE FINISH IS NOT AVAILABLE, SUBSTITUTE WITH BRUSHED NICKEL3. PC350 FRAMES TO BE CLEAR ANODIZED ALUMINUM.4. ALL DIMENSIONS ARE IMPERIAL. CONTRACTOR TO OBTAIN SITE DIMENSIONS PRIOR TO MANUFACTURING.5. ALL NEW PAINT GRADE DOORS TO BE 1 3/4" THICK 5PLY SOLIDCORE WOOD DOOR C/W MASONITE FACES FOR PAINT FINISH. SHOP FINISH UNLESS NOTED OTHERWISE.6. RESERVED7. DOOR & GLAZING SIZES SHOWN ARE NOMINAL SIZES. CONTRACTOR TO NEW FRAME DIMENSIONS PRIOR TO MANUFACTURING.8. CONTRACTOR TO OBTAIN SITE DIMENSIONS PRIOR TO MANUFACTURING AND CO-ORDINATE WITH DOOR & FRAME SUPPLIERS FOR OPENING REQUIREMENTS9. PC350 TO SUPPLY FRAMES C/W MOUNTED HINGES AND STRIKE PLATES FOR PC FRAMES, CONTRACTOR TO INSTALL. CONTRACTOR TO SUPPLY AND INSTALL ANY DOORS,

NON-PC350 FRAMES, TEMPERED GLAZING AND ANY ADDITIONAL HARDWARE REQUIRED FOR ALL DOORS.10. GENERAL CONTRACTOR TO CONFIRM WITH PC 350. LUMO WILL SUPPLY OFFSET PULL FOR THE SLIDING DOOR.11. SLIDING DOORS TO HAVE CLOSING ASSIST HARDWARE.12. CONTRACTOR TO CO-ORDINATE HINGE ROUGH-IN FOR PC350 FRAMES WITH MANUFACTURER'S TEMPLATES.13. REFER TO MANUFACTURERS CUT SHEETS & FOLLOW RECOMMENDED INSTALLATION INSTRUCTIONS.14. NEW CLOSER WHERE SPECIFIED ARE TO BE METAL AND MOUNTED ON ROOM INTERIOR UNLESS OTHERWISE NOTED.15. ALL TENANT DOORS TO BE KEYED TO TENANTS KEYING REQUIREMENTS AND LANDLORDS' KEYING SYSTEM (TBD). GENERAL CONTRACTOR IS TO ENSURE LANDLORD'S 'MASTER'

KEYING REQUIREMENTS ARE MET AND CO-ORDINATE TENANT'S KEYING REQUIREMENTS WITH TENANT, LANDLORD AND LOCKSMITH.LOCKSMITH: TBDLANDLORD CONTACT: TBDCLIENT CONTACT: ANTHONY JOSEPH

16. GENERAL CONTRACTOR TO PROVIDE SHOP DRAWINGS & SCHEDULE FOR DESIGNER APPROVAL PRIOR TO ORDERING ANY MATERIAL FOR THE FOLLOWING:DOORSFRAMES (INCLUDING PC350)HARDWARE

NOTES

DOOR NOTES:1. ALL WOOD DOORS TO BE 1-3/4" THICK SOLID CORE WOOD DOOR AS PER DOOR SCHEDULE2. REFER TO WALL FINISHES PLAN 1060 FOR SPECIFICATIONS FOR DOORS FINISH.3. PAINTED DOORS AND FRAMES TO RECEIVE (1) COAT OF PRIMER AND (2) COATS OF LATEX PAINT4. ALL WOOD DOORS TO BE SHOP FINISHED.5. CONTRACTOR TO VERIFY THROAT SIZE OF ALL DOORS AND ADVISE DESIGNER OF ANY DISCREPANCIES.

HARDWARE NOTES:1. ALL NEW HARDWARE FINISH TO BE BRUSHED STAINLESS STEEL OR BRUSHED NICKEL.2. KEY ALL LOCKS TO BASE BUILDING MASTER AND SUBMASTERS. CO-ORDINATE LOCK REQUIREMENTS AS NOTED WITH PROPERTY MANAGEMENT OFFICE AND SURREY PLACE CENTRE3. DOOR SIZES SHOWN ARE NOMINAL SIZES. CONTRACTOR TO OBTAIN SITE DIMENSIONS PRIOR TO MANUFACTURING.4. MOUNT CLOSERS ON INTERIOR SIDE OF ROOM UNLESS OTHERWISE NOTED5. CONTRACTOR TO SUBMIT HARDWARE SCHEDULE (SHOP DRAWING) FOR APPROVAL6. ALL SWING DOOR LEVERS TO MATCH MORGAN HARDWARE CORPORATION STYLE: ATLANTA WITH ROUND ROSETTE OR APPROVED ALTERNATE

TYPE E - (MIN 36" CLEAR

OPENING REQUIREMENT)

TYPE F TYPE G

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

DOOR SCHEDULE

SCREEN SCHEDULE

NC ___ \i-RIIY

• • • • • • • • • • •

• • • • • • • • • • • • • • • •

•

6' /' ,. 4" .ALL Dll•,1['6 Cl~S 7' 4" 3' L"

.,:;;~--, ---,c;'-'-~1-:J'-, ---,~4,-J~--~,--s'"-,-,-f-f"-, ,. C~, ST= 2"t~----,-_-,:i,-, ----,~~'-/-,, ~,--,-,-/-41.l<-,, . .,___ -'le--'!.- ' __..,,_ I -'].,,---'].. ,,;-' ' ..,,.., , ___ _

,, I

I

l > I

I I

, cc: r·-

/ ;; _ __,

:.i-~':c---========== .. ..l',._ ___ C[~"'-l

'..:Ll:..,\R 11:.Hl'l:.Rl:.L:: :~1 .t..'~s (n:.1::.c)

°)\

' ' ' ' ! l=!==---- 111~ I

I I

if -.'-1 _ _.c_, _L_____:k .. , ' --------~~, / -SC--¾---- X) I>

-_'i\1 :~t.J.lrnlAS -1;, Wl~)C\N FI f,1 -::, RF ."'PP IFn c;r,., l~~S D[ :::,1 ~C,C)'v1 -----

-~ ~-\OTE: \/E~ =---r ,

EC , l 1 ,\L_ lJl\~=.I\::.; Dr,1s >I.--"- I---- + --+ -! Cil'J SI Ir

'~ N ~ C: ~ ;::-- -- -

C iU; \,:, , I

-...J ~ '.c -;,, z

-/~ -..... : -~ \ i' -· ,' \ 10(j' ... ___ ,

::::o\nA.CTC~~ I::, \;i,ll,IC I f--''.:,'.::<i :-,:-;1;1-1,Js

SCREEN ELEVATIONS S:::AL[: ~1-S

----'~'.TE VE~ FY

.~:e::'' ::,r,.1 :·, r 0 c" c; _,,..,,. j

:\_L Ullv'll,J'.:.:1cr-..s

' .-,'-1 f----------j ~ ---..j l-,'C' . '~

" N

~~.L_ _______ ~

3\1 SA.f\lCOLAST=C· -,:,'II\DCW illlvl -c B::: 1\PPLIED Cl~ 11,SIUI:. er "";OD\.1

\<_

' ' ' '

I

I I

I

II Cf

1'-- _______ _J L_ ___ Jj

, ':.1 C

' 'i-- r---

c:1 rA--s: 1r\H-_;rrz-1: C-Lt•SS (=>::;35c,)

12" OF=-SET l;U __ Hi'.J\Llll:.

1C'-V'

'

-

,

', -4-tr===== ==Jc==== =ji ,., (~ C'.

oz '...:l _J

o·:, w,. C y(),C

~ ~\-,;: ;/

.,, .. ,-~. ~"' t- t----- --i --~--- --1 '

'..:;LA.SS '.DY '.".)I\Jll;ACI'.)< TC, ,,~t-.TCH l"C-35-J sc:;:EE\S

-l'JOTE: VE~IFY AL_ =I 1-/:::1\SICHS Q\J STE

0:: 0

' ,c i<

::::oc.3~:J 4t SLIJ \JC. JOCR /,NJ SICELIGf-T FR/•.kE ',\'llf- t\_l.llvll\U\1 ---i.A I r r,J C( )Vr h'S

, " 0~ u7 ,-,-

. c~ - ,. 0 CC: CC CO

• I i"°i .'" sr :5 _I ,·i

o" e

FC:: '

• • • • • • • • • • •

FQ

• • • • • • • • • • • • • • •

~c ~

~:: :-, ::! ::

::---.~ ..

13'-1' 7/':','

-:_:L=-/,R Uv1P=.hU a.".SS ,'.[IY '.:'.nJIIC.ACI'.) \'. - :::, tPTCH l"C350 sc=s::=::E\JS

'

• •

SCREEN SCHEDULE

=-o t ,

I

-\OTE '•JE:;.: FY FL J v:::r..s1mb :J\J STE

( /

E:CRUD:'::C i\'~:JDIZEJ ;\LU\,1l'JL.lv' =-R:\1/E

JCl~B_E \-IET1\L STU~S 1\T JC:JR & W '~D:JW FR/J,1 ES 1\ \Jl'. J1\\'i::i'.'_;

AN[) ,A\IJS

• • • • • • • • • • • • • • • • •

r < 1 f-d. )r 1: A\J'.)IJl/r i .ALUl•,W,JL \/ =-p,t,J1/E C/'i,' S,E,\L:'::C' c;_1\SS L.1\JIT .

r 1xr

• • • • • • • • • • • • • • • '

':-i 1)- I (;--i

' S ,Y

L

'

I

I

j

i

• • • • • • • • • • • • •

•

• • • • • • •

·~

• •

SC_ D occ,R

DOOR SCHEDULE

:;vf--' --11).

-'A< 1111'.)\j

i

13 'v11·,1 --::;yr-:·:;1_\1

::3C:\f.U ::3:J -

•

ljOUl 1 :-;1u1is -

,Al 1;uu1< 11 _;:,,I) ,t,:,m .A \.f? S

)'' ,·;. -)"

,, , ..

' '-'-

' '-' '-

'-'

' ' '-'

c,

/ /

/ ,,

'

/

' ' ' /

/ /

/ ,.

,,

n

---------.3\/1 ':;,t},DELASTED

-~" L ,· /' ~,,

2' ,,,,

, , ~)

<

'

r.1 :11 f ·

L

:¥' L

' . ·11 ;c----¾

~t-",c1-'"S;j-

,, C) c

I

.

rnAV[ TJ C[ ~[, NISI l=J. RC:0 \ISH I\-::R :::R S DE-,) lv'i:.TCH \"=-\/1/ SCLID DOC) :~1

(VI 1\1 V \-VI 111 /1N ~ 01~1:,

'/,/ l~IJC\iV =- I'/ 1,) R=-

/'-._)PI -1:, '.)l,J I\'...:: 1:,- '.)f­-;c,c, ~-1

4' 0 ..

.

' 1,,

0 ~ '; , ..

-"c-======l

2'' 2· ~· O"

1+ __ 2_-_5_··_,_,_~_,_,_,_:~ ---',., ,------ ,~,~ --- -----'s- tj-

/ \ I \

I \ I \

I \ I \

~ > Cl

\ I \ I

\ I \ I

\ I \/ _l__ ___ y_ ____ -----'s-

DOOR ELEVATIONS

onespace

one team . one vision.

NO. DATE REVISIONS C' -J1\XX2D1,

?,Jlii.C' .17 0 '.'J, TFlflFR 1. /U1 .:.1/.U-~

NO. DATE ISSUED

ALL DRAWINGS ARE THE PROPERTY OF ONESPACE 1>111D THEY ARE NOT TO BE REPROOUCED IN WHOLE OR IN PART WITHOUT IYRITTEN CONSENT FROM ONESPACE.

DRAWINGS ARE INTENDED TO CONVEY SCOPE OF WORK AND INDICATE GENERAL AND APPROXIMATE LOCATION, ARRANGEMENT AND SIZES OF MATERIALS AND PRODUCTS.

ALL CONSTRUCTION TO BE ACCORDING TO BEST COMMON PRACTICE AND CONFORM TO THE ONTARIO BUILDING CODE IN EFFECT AT THE TIME •

CLIE\T

SURREY PLACE CENTRE

ADDRESS 777 Bay stree~ Toronto, Ontario

JR,A,\,'/1\::;

DOOR AND SCREEN SCHEDULE DOOR AND SCREEN DETAILS

=::\T[

17079 Jrn· 19, 2C,'t,

='LO-TED Jt..TE

NTS Jar 19, 2C,'b

1100

SCHEDULE OF GRILLES AND DIFFUSERS

TYPE MANUFACTURER MODEL DESCRIPTION

VOLUME

CONTROL

FINISH OPTIONS REMARKS

A E.H. PRICE LTA

LIGHT TROFFER DIFFUSER

SADDLE

YES -

LENGTH: 48" (1200mm)

WIDTH: 20" (500mm)

PROVIDE LP MODEL AS REQUIRED.

COORDINATE WITH LIGHT FIXTURE SELECTION PRIOR TO ORDER.

REFER TO FLOOR PLANS FOR NECK SIZE AND AIRFLOWS.

B E.H. PRICE LTA

LIGHT TROFFER DIFFUSER

SINGLE SIDED

YES -

LENGTH: 48" (1200mm)

PROVIDE LP MODEL AS REQUIRED.

COORDINATE WITH LIGHT FIXTURE SELECTION PRIOR TO ORDER.

REFER TO FLOOR PLANS FOR NECK SIZE AND AIRFLOWS.

C E.H. PRICE AST210 LINEAR DIFFUSER YES

TO ARCH.

DIRECTION

1-SLOT, 1" SLOT WIDTH

LENGTH: 60" (1500mm)

T-BAR LAY IN

ENGINEERED PLENUM

REFER TO FLOOR PLANS FOR NECK SIZE AND AIRFLOWS.

D E.H. PRICE SCD SQUARE CONE DIFFUSER YES

TO ARCH.

DIRECTION

SIZE: 20"x20" (500mm x 500mm)

FRAME: 31

T-BAR LAY IN

REFER TO FLOOR PLANS FOR NECK SIZE AND AIRFLOWS.

E E.H. PRICE 80 EGG CRATE YES

TO ARCH.

DIRECTION

DUCTED: F BORDER

NON-DUCTED: CORE

REFER TO FLOOR PLANS FOR SIZE OF GRILLES.

NOTES

1. CONFIRM FINISH WITH ARCHITECT PRIOR TO ORDER

2. REFER TO DRAWINGS FOR QUANTITIES.

SCHEDULE OF ELECTRIC DOMESTIC HOT WATER STORAGE HEATERS

TAG MANUFACTURER MODEL LOCATION

SIZE

DIA. x HEIGHT

(IN.)

STORAGE

CAPACITY

(USGAL)

INPUT

(kW)

RECOVERY

(GPH @

100°F RISE)

POWER

(V/∅/Hz)

REMARKS

DHWT A.O. SMITH DEL-6

STORAGE ROOM

CEILING

14-1/4" x 15-1/2" 6 1.5 6 208/1/60

MOUNT HEATER ABOVE

CEILING C/W DRAIN PAN &

DCW SOLENOID VALVE

WIRED TO LIQUITEK LEAK

DETECTION SENSOR.

NOTES

1. REFER TO SPECIFICATIONS FOR ADDITIONAL DETAILS.

MECHANICAL DRAWING LIST

DRAWING NO. DRAWING NAME

M1

DRAWING LIST, SYMBOL LIST, SCHEDULES

M2 LEVEL 27 - HVAC - DEMOLITION

M3 LEVEL 27 - PLUMBING & FIRE PROTECTION - DEMOLITION

M4 LEVEL 27 - HVAC - NEW WORK

M5 LEVEL 27 - PLUMBING & FIRE PROTECTION - NEW WORK

M6 SPECIFICATIONS

GENERAL NOTES

1. CONTRACTOR SHALL VISIT THE SITE PRIOR TO SUBMITTING BID TO VERIFY

EXISTING CONDITIONS AND TO CONFIRM THAT EQUIPMENT AND SERVICES

CAN BE INSTALLED AS INDICATED ON THE DRAWINGS. CONTRACTOR TO

INCLUDE FOR ALL COSTS ASSOCIATED TO FACILITATE INSTALLATION. IT IS

THE CONTRACTORS RESPONSIBILITY TO NOTIFY THE ENGINEERS OF ANY

DISCREPANCIES, OMMISSIONS, AND INTERFERENCES.

2. ENSURE THAT ALL NEW AND EXISTING EQUIPMENT REQUIRING MAINTENANCE

IS ACCESSIBLE AND THAT ACCESS REQUIREMENTS ARE NOT OBSTRUCTED BY

NEW OR EXISTING SERVICES. PROVIDE ACCESS DOORS/PANELS TO MATCH

BASE BUILDING STANDARDS WHERE REQUIRED.

3. PROVIDE ALL REQUIRED CUTTING AND PATCHING TO PERFORM THE SCOPE

OF WORK AS OUTLINED IN THE DRAWINGS.

4. ALL EQUIPMENT THAT IS TO BE REMOVED IS TO BE TURNED OVER TO THE

LANDLORD OR DISPOSED OF AS DIRECTED. REMOVE ALL EQUIPMENT

COMPLETE INCLUDING HANGARS, DUCTWORK, PIPING CONNECTIONS, POWER

AND CONTROL WIRING AND DEVICES, ETC.

5. REMOVE ALL OBSOLETE PIPING, DUCTWORK, HANGARS, ETC. ABOVE CEILING.

UNIT PRICES

NOTE: WORK ASSOCIATED WITH BELOW NOTED UNIT PRICES SHALL PROCEED ONLY

ONCE INSTRUCTED TO DO SO. COMMENCEMENT OF WORK WITHOUT PRIOR

INSTRUCTION TO PROCEED WILL NOT BE GROUNDS FOR SUBMISSION OF

ADDITIONAL COSTS.

#1 ADDITION AND/OR DELETION OF ONE (1) SPRINKLER HEAD OF EACH TYPE AS

SHOWN ON THE DRAWINGS.

#2 ADDITION AND/OR DELETION OF 3.0 M (10 FT) OF SPRINKLER PIPING COMPLETE

WITH FOUR (4) ELBOWS, HANGERS, ETC. FOR REROUTING OF BRANCH PIPING AS

REQUIRED.

SCHEDULE OF VARIABLE AIR VOLUME BOXES

UNIT

DESIGNATION

MANUFACTURER MODEL

AIRFLOW RANGE

(CFM)

ATTENUATOR

LENGTH

(IN.)

DISCHARGE

NC

OPTIONS

MIN. MAX.

7 E.H. PRICE SPV8000 99 650 36 24

ACCESS DOOR: ADQ

PNEUMATIC CONTROLS KIT: PKIT-NO

CP101 PNEUMATIC CONTROLLER

LINER: SM-3/4" THICK

NC VALUES TAKEN AT ΔP = 1.5"w.c. ACROSS UNIT

NOTES

1. ALL VAV BOXES SHALL BE PROVIDED WITH DEDICATED ROOM TEMPERATURE SENSOR

2. PRESSURE INDEPENDENT COMPLETE WITH CROSS FLOW SENSOR.

3. PNEUMATIC CONTROLLER/ACTUATOR SHALL BE SUPPLIED AND INSTALLED BY VAV BOX MANUFACTURER.

4. REFER TO FLOOR PLANS FOR LOCATIONS AND QUANTITIES.

SCHEDULE OF FANS

TAG MANUFACTURER MODEL LOCATION AREA SERVED WEIGHT

DESIGN

AIRFLOW

(CFM)

ESP

(IN. WC)

RPM MOTOR HP

SPEED

CONTROLLER

SOUND

(SONES)

ELECTRICAL

REMARKS

FLA

(A)

POWER

(V/∅/Hz)

EF-1 GREENHECK CSP-A200 CEILING PLENUM MEETING ROOM 25 125 0.50 861 44 W YES 1.0 0.43 115/1/60

WALL MOUNTED SPEED CONTROLLER IN

MEETING ROOM

EF-2 GREENHECK CSP-A200 CEILING PLENUM KITCHEN 26 75 0.50 770 30 W YES 0.5 0.43 115/1/60

CONTROLLED VIA SWITCH. SPEED

CONTROLLER MOUNTED ON FAN.

EF-3 GREENHECK CSP-A200 CEILING PLENUM COPY AREA 26 75 0.50 770 30 W YES 0.5 0.43 115/1/60

CONTROLLED VIA SWITCH. SPEED

CONTROLLER MOUNTED ON FAN.

EF-4 GREENHECK CSP-A700 CEILING PLENUM IT / SERVER ROOM 37 400 0.50 829 121 W YES 0.6 3.20 115/1/60

CONTROLLED VIA T-STAT IN ROOM. SPEED

CONTROLLER MOUNTED ON FAN.

NOTES

1. REFER TO SPECIFICATIONS FOR ADDITIONAL REQUIREMENTS

2. INLINE FANS SHALL BE PROVIDED WITH NSN TYPE MOUNTING HANGARS.

3. DIRECT DRIVE FAN C/W SPEED CONTROLLER

PLUMBING FIXTURE SCHEDULE

TAG PRODUCTS DESCRIPTION ACCESSORIES SAN HW CW VENT NOTES

S-1 SINK

FRANKE COMMERCIAL #LBS6808-1/1 SINGLE BOWL

COUNTERTOP MOUNT SINK, 1 HOLE, 508 MM (20") WIDE X 521 MM

(20-1/2") LONG X 203 MM (8") HIGH DEEP, COUNTER MOUNTED,

BACKLEDGE, GRADE 18-10 20 GA. (0.9 MM) TYPE 302 STAINLESS

STEEL, SELF-RIMMING, SATIN FINISH RIM AND BOWLS,

MOUNTING KIT PROVIDED, FULLY UNDERCOATED TO REDUCE

CONDENSATION AND RESONANCE, FACTORY APPLIED RIM

SEAL, 3-1/2" (89 MM) CRUMB CUP WASTE ASSEMBLY WITH 1-1/2"

(38 MM) TAILPIECE.

AMERICAN STANDARD RELIANT+ #4205.104.002 SINGLE HANDLE FAUCET, POLISHED CHROME FINISH, CENTER HOLE ONLY,

WASHERLESS CERAMIC DISC CARTRIDGE, 8.3 LPM (2.2 GPM) REGULATOR, SWING SPOUT, 232 MM (9-1/8") PROJECTION

REACH, LEVER HANDLE, DELUXE PULL-OUT SPRAY WITH ADJUSTABLE SPRAY PATTERN AND LOCK & TURN ACTIVATION

BUTTON.

LAWLER #TMM-1070, BELOW DECK MECHANICAL WATER MIXING VALVE, BRONZE BODY, TEMPERATURE ADJUSTING DIAL,

10 MM (3/8") INLETS AND OUTLET COMPRESSION FITTINGS, HIGH TEMPERATURE THERMOSTATIC LIMIT STOP, SHUT-OFF

WITH AUTOMATIC RESET WHEN TEMPERATURE EXCEEDS 120 ºF (48.8 ºC), INTEGRAL CHECKS, OFFER TEMPERATURE

RANGE FROM FULL COLD THROUGH 46 °C (114.8 °F).

MCGUIRE #LFH170BV FAUCET SUPPLIES, CHROME PLATED FINISH POLISHED BRASS, COMMERCIAL DUTY 1/4 TURN BALL

VALVE ANGLE STOPS, 13 MM (1/2") I.D. INLET X 127 MM (5") HORIZONTAL EXTENSION TUBES, COMBINATION V.P. LOOSE KEY

HANDLES, ESCUTCHEON AND FLEXIBLE COPPER RISERS.

MCGUIRE #8912CB P-TRAP, HEAVY CAST BRASS ADJUSTABLE BODY, WITH SLIP NUT, 38 MM (1-1/2") SIZE, BOX FLANGE AND

SEAMLESS TUBULAR WALL BEND.

1-1/2" 1/2" 1/2" 1-1/4"

DETAIL OF VAV BOX INSTALLATION

SCALE: NTS

36" (900mm) LONG

ATTENUATOR

FLEXIBLE DUCT

MAXIMUM 6 FT

(1800mm)

SUPPLY AIR DIFFUSER

REFER TO FLOOR PLANS FOR SIZE AND TYPE

RIGID SPIRAL DUCT AS

REQUIRED. DUCT TO BE SAME

SIZE AS FLEXIBLE DUCT

FLEXIBLE DUCT SIZE TO

MATCH DIFFUSER NECK SIZE

SPIN ON COLLAR WITH

BALANCING DAMPER

REFER TO FLOOR

PLANS FOR DUCT SIZES

RIGID INLET DUCT SAME

SIZE AS VAV BOX INLET.

LENGTH TO BE

MINIMUM 4 x DIAMETER

ACCESS DOOR

CONTROLLER.

MAINTAIN 36" (900mm)

CLEAR SPACE IN

FRONT OF PANEL

CONICAL TAKE OFF

MA

IN

D

UC

T

VAV BOX

DETAIL OF TRANSFER AIR DUCT

SCALE: NTS

25mm (1") THICK

ACOUSTIC LINING

MIN. 1500mm (60")

MIN. 1500mm (60")

25mm (1") THICK

ACOUSTIC LINING

RETURN GRILLE

EQ

.E

Q.

HANGARS

ELBOW TO RETURN GRILLE

MIN. DUCT WIDTH

DUCT WIDTH

PARTITION WALLSTRUCTURAL SLAB

AA

SECTION A-A

NOTE: REFER TO FLOOR PLANS FOR QUANTITIES AND DUCT SIZES

DETAIL OF EXHAUST FAN

SCALE: NTS

CEILING

STRUCTURAL SLAB

VARIABLE SPEED CONTROLLER OR

ON/OFF SWITCH. REFER TO DRAWINGS

AND SCHEDULES FOR TYPE

EXHAUST / TRANSFER FAN

SUSPENDED ABOVE CEILING C/W

NSN TYPE VIBRATION ISOLATION

FLEXIBLE CONNECTION

MATERIAL (TYPICAL)

ACOUSTICALLY LINED EXHAUST

PLENUM TO BE SAME DIMENSIONS

OF EXHAUST GRILLE

EXHAUST AIR GRILLE.

REFER TO PLANS FOR SIZE

MIN. 5 FT (1500mm) ACOUSTICALLY

LINED EXHAUST AIR DUCT

MIN. 5 FT (1500mm) ACOUSTICALLY

LINED EXHAUST AIR DUCT

EXHAUST AIR OPENING

IN DUCT

1" x 22 GA. STRAP HANGAR SECURED

TO DUCT AND STRUCTURE

NOTES:

1. ACOUSTICALLY LINED DUCTWORK TO BE 1" (25mm) THICK. REFER TO SPECIFICATIONS FOR ADDITIONAL DETAILS.

2. REFER TO DRAWINGS AND SCHEDULES FOR DETAILS ON EXHAUST FAN, CONTROL, AND DUCTING ARRANGEMENT AND SIZES.

3. PROVIDE ACCESS TO ALL EQUIPMENT AND DEVICES. COORDINATE INSTALLATION LOCATION WITH EXISTING STRUCTURE

AND SERVICES.

DETAIL OF HOT WATER TANK ABOVE CEILING

SCALE: NTS

STRUCTURAL SLAB

CEILING

N.O.

SINK

1-1/2" DRAIN CONNECTION

FROM DISHWASHER

TRAP PRIMER

CONNECT TO EXISTING

DRAIN LINE ON TENANT

FLOOR BELOW. (TYP)

FUNNEL FLOOR DRAIN

DHW TANK DRAIN TERMINATE

OVER FFD C/W AIR GAP

1-1/2"∅

2"∅

CONNECT TO EXISTING

DRAIN IN CEILING

SPACE BELOW

3/4"∅ 1/2"∅

1/2"∅

3/4

"∅

1/2"∅ DCW & DHW TO SINK

1/2"∅ DHW TO DISHWASHER

1-1/4"∅

1-1/2"∅

CONNECT TO EXISTING

BUILDING VENT

NORMALLY OPEN

SOLENOID VALVE

(120/1/60)

GALVANIZED DRAIN

PAN WITH MIN. 2"

UPTURNED EDGE

DRAIN PAN & DHW TANK

SUSPENDED FROM

STRUCTURE

EXPANSION TANK C/W N.O.

ISOLATION VALVE WITH

HANDLE REMOVED LEAK DETECTION SENSOR

WIRED TO SOLENOID VALVE.

UPON DETECTION OF WATER,

SOLENOID TO CLOSE

HOT WATER TANK RELIEF

HOT WATER TANK

DRAIN PAN OVERFLOW

DRAIN

PIPE DOWN

PIPE UP

VALVE

SUPPLY AIR DUCT UP & DOWN

RETURN / EXHAUST AIR DUCT UP & DOWN

DUCTWORK FLEXIBLE CONNECTION

1" THICK ACOUSTICALLY LINED DUCTWORK

SQUARE ELBOW WITH TURNING VANES

TEMPERATURE SENSOR

CONTROL VALVE

DUCT CONTINUATION (ROUND & RECTANGULAR)

PIPE CONTINUATION

SUPPLY AIR DIFFUSER C/W FLEX DUCT & SPIN ON

CONNECTION WITH BALANCING DAMPER

RETURN / EXHAUST GRILLE

SEMI RECESSED SPRINKLER HEAD

CONCEALED SPRINKLER HEAD

P-TRAP

CO

CLEAN OUT (FLOOR & CEILING)

CO

PIPE WYE CONNECTION

PIPE 45° CONNECTION

PIPE ELBOW

PIPE TEE

CONTROL WIRING / PNEUMATIC TUBING

MECHANICAL SYMBOLS

DESCRIPTIONSYMBOL

SWITCH / SPEED CONTROLLER

FLOW DIRECTION

SUPPLY / RETURN GRILLE

CAPPED PIPE

RTU-1 EQUIPMENT TAG

AIRFLOW DIRECTION

A

200

94

2

QUANTITY

DIFFUSER TYPE

NECK / FACE SIZE

AIRFLOW (L/s)

CONNECT TO EXISTINGCTE

VAV

283

189

8

VAV

1.5

283

189

8

VAV SIZE

MAX AIRFLOW (L/s)

MIN AIRFLOW (L/s)

HEATING (kW)

DIFFUSER TAG

VAV BOX TAG

DOMESTIC COLD WATER (DCW) PIPING

DOMESTIC HOT WATER (DHW) PIPING

onespace unlimited inc.

DRAWING LIST,

SYMBOL LIST,

SCHEDULES

N/A

M1

'

I~ I/E3"'-y : .. ·• . -4;,·. . " ... . *·4_ ·".- : "' . _.

"· ._ :.: • . . . •. ., .• "!'. ·:· ... ·~ : . ,, . " : .. · . : ~ ..... .·• ,,

" . . • . •

.i ~

- i i - - - - ,_

-~~II = f-

• ~1 - I I

• , 1--- - - - - - ---------------- --r----------- 1

' " - --

+ -- ' "----

' - ' I

i '·'?

I \::..,

---

r r - + 1 . '1 ~ • -is.• • ... ,d_ ..... . . .. - ~ ............... " ...... .. . .. .. .. ... .. . .. . .. .. .. ..... I · . .. ... . ..........

,,·,,,:. .·. .. . " • • .. ... I • · . • • . . . . . . .. . ....

• •• . : • ' . . - ·.-:. ·: :: .-.-.-.-.. '.'.' . .- .-.-.-.-.. '.'.' . .- ·:::::: .·.·.-.-.-.-. . -.-.-.-.-.-.-.-. . . .... "'

' '--- I I

·1 I )~ 7

~ '

l I - - - - --~ i -

71 / I I

/ I / J /

L j _L _J - - - - - - - f-+ -C

I\ .

r -<1;,·. .

··:-.. -~;.:~·· ......... . ... ' :,d ~:: •. lfl. •. -~ .. ,, . " : .... . . . . .

~ ,, -I

---

--~l • • ., ' r \

~ i , - -l \

~

' . ' ~- ' ' . . I/ 1 - ... _

rs- I ' - I l

' '--- ' ' C-- - - - -------- -- __ -_J __ - ------

y

[' I ' I ' ' ' ' I

II I I~ l ~ I ""9' i---tx1---?

I - i Ltxl---? -

I r:lJ -J I • • ,---,

,<!;.·. . ..... :1 '.

" , .... •. . .. . • .: Ill •• •'· ·- ,·' ..... 1 . . .. _"' •

I-- lfff ' ,

I

.. ~ ..

r J .

I\

~0 ISi~ 0

•. :::JIIC: -. : ~

q ~I

j- j-ISi-(f)

-, ® ,,------._.. ---+O+-

------4

--I • • ' '

--iCAP

-iJ . . -. : " ..

'I- ~

~ 1:

L,

,-I,

\-----I

\-----~ _, 0

I I -

~ r

J L [8t

onespace

'-' one team . one vision .

NO. DATE REVISIONS

03. 17JAN2018 TENDER 02. 27NOV2017 PERMIT 01. 24NOV2017 COORDINATION NO. DATE ISSUED

• RDZ ENGINEERS LTD

CLIENT

3 - 530 R own t ree D a i r·y Road Va u g h an, Ontar io L 4 L 8H2 emc i l : i n f o@rdze n g . ca

SURREY PLAY CENTRE

ADDRESS 777 Bay Street, Toronto, Ontarto

DRAWING

PROJECT NUMBER

17013

SCALE

DATE Jan 12, 2018

PLOTIED DATE

Jan 12, 2018

DRAWING NO.

1500 X 3001500 X 3001350 X 300

13

50

X

3

00

325 X 200

2500 X 300

EF

R/AR/A

R/A

1200 LONG SLOPED

PLENUM (TYPICAL

FOR ALL)

HEAT

PUMP

DCW TO HP

R/A

R/A

8

8

300 X 250

350 X 350

250 X 250

40

0 X

2

50

350 X 200

350 X 350

35

0 X

3

50

35

0 X

2

50

R/A

3 1

2

1

1

4

5

7

6

EXISTING PNEUMATIC VAV

BOX TO REMAIN (TYPICAL)

REMOVE EXISTING

PLENUM AND LINEAR

DIFFUSER C/W FLEX

DUCT (TYP.)

EXISTING RETURN AIR

TRANSFER DUCTS ABOVE

CEILING TO REMAIN

onespace unlimited inc.

LEVEL 27

HVAC

DEMOLTION

1:50

M2

KEYED NOTES

CUT BACK AND REMOVE DUCTING TO THE EXTENT SHOWN. CAP AND SEAL DUCT AIR

TIGHT.

REMOVE EXISTING VAV BOX AND HAND OVER TO LANDLORD OR DISPOSE OF AS

DIRECTED.

REMOVE RETURN AIR ELBOW SILENCER AND RELOCATE TO MEETING ROOM AS

IDENTIFIED IN THE NEW WORK DRAWINGS.

REMOVE RETURN AIR TRANSFER DUCT AND RELOCATE TO SMALL MEETING ROOM

AS IDENTIFIED IN THE NEW WORK DRAWINGS.

REMOVE EXISTING HEAT PUMP MOUNTED ABOVE THE CEILING COMPLETE WITH

DUCTING, THERMOSTAT, DOMESTIC WATER CONNECTION, AND DRAIN. CUT BACK

WATER AND DRAIN PIPING BACK TO MAIN AND CAP AND ISOLATE.

REMOVE VAV BOX INLET FLEX DUCTING AND REPLACE WITH RIGID DUCTING.

REMOVE EXISTING EXHAUST FAN COMPLETE WITH ALL DUCTING AND POWER

CONNECTIONS.

8. UNLESS OTHERWISE NOTED, REMOVE ALL EXISTING THERMOSTATS AND RELOCATE

AS REQUIRED. CLEAN AND RECALIBRATE ALL THERMOSTATS.

9. REMOVE ALL EXISTING DIFFUSERS AND FLEX DUCTING AS INDICATED. HANDOVER

TO LANDLORD OR DISPOSE OF AS DIRECTED.

10.REMOVE ALL DUCTWORK AS INDICATED, COMPLETE WITH ALL HANGARS.

M2

1

LEVEL 27 - HVAC - DEMOLITION

Scale: 1:50

J

0

n II :~, II '' u \

\ I I

n I

!k, +--v------y---11 __ _, I \

u c:=......i,_=:::1 c:=....J......=:::1

K

n II :~, II I u I

L

---=

/ r 11 1

11

n II

i~--.:j II u

11 n

11

II :r---U--~ T

G)

® @

© ®

® 0

M

.r·

. • j

,· I

I I I

2

4

onespace

'-' one team . one vision.

NO. DATE REVISIONS

03. 17JAN2018 TENDER 02. 27NOV2017 PERMIT 01. 24NOV2017 COORDINATION NO. DATE

• CLIENT

ISSUED

RDZ ENGINEERS LTD 3 - 530 R own t ree D a i r·y Road Va u g h an , On t ar io L 4 L 8H2 emc i l : i n f o @ rdze n g . ca

SURREY PLAY CENTRE

ADDRESS 777 Bay Street, Toronto, Ontarto

DRAWING

PROJECT NUMBER DATE

17013 Jan 12, 2018

SCALE PLOTIED DATE

Jan 12, 2018

DRAWING NO.

HEAT

PUMP

DHW TANK

ABOVE CEILING

TO BE REMOVED

COMPLETE

DRAIN DN

DRAIN DN

REMOVE EXISTING

SPRINKLER HEAD

(TYPICAL FOR ALL)

REMOVE EXISTING

SPRINKLER HEAD

(TYPICAL FOR ALL)

1

4

3

2

REMOVE EXISTING

SPRINKLER HEAD

(TYPICAL FOR ALL)

EXISTING DCW PIPING

IN CEILING SPACE

REMOVE EXISTING

SPRINKLER HEAD

(TYPICAL FOR ALL)

onespace unlimited inc.

LEVEL 27

PLUMBING & FIRE PROTECTION

DEMOLTION

1:50

M3

KEYED NOTES

REMOVE EXISTING SINK AND UNDERCOUNTER ELECTRIC DHW HEATER COMPLETE.

CUT BACK DCW, DHW, DRAIN, AND VENT PIPING BACK TO MAIN AND PREPARE FOR

EXTENSION TO NEW WORK.

CUT BACK DCW AND DRAIN PIPING FROM HEAT PUMP BACK TO MAIN AND CAP AND

ISOLATE.

REMOVE EXISTING ELECTRIC DHW HEATER SUSPENDED ABOVE CEILING COMPLETE

WITH ALL PIPING CONNECTIONS BACK TO MAIN, POWER CONNECTION, DRAINAGE,

ETC.

EXISTING PLUMBING STACK WITHIN WALL DOWN TO FIXTURES AND FLOOR BELOW.

CUT BACK ALL PIPING BACK TO MAIN AND CAP AND ISOLATE. COORDINATE ANY

WORK ON FLOOR BELOW WITH THE LANDLORD AND TENANT.

5.

REMOVE ALL SPRINKLER HEADS IN THE TENANT SPACE.

M3

1

LEVEL 27 - PLUMBING & FIRE PROTECTION - DEMOLITION

Scale: 1:50

0

J

• \

•

•

K

11

11

11

• 11

11

11 -

II A

11 11 • I • •

L

I I

I I - -11

11

11

111 ~ II

l ----=-====ll_=-=u__

M

-

-~ 1~ /1 11,~ II )>

..... ------==---_- ___ ===:J v UI ~-------~_1 __ -_-_-_---d _J re- ____ _

If-- - - - -- -

•

~-/- t

; / - ~ 'I

" lln F TIL ~ ~ jl I I J I II L / L - - -lh- = -==jl

• 11 ~ -L

-,---. I wJ I I IL -- - I I I 1

1 ~~ 11 - -

~ _J

~===== ;

L---,~ r- o _LI t ~ Q 11 u 0 I y-- - 11 _jJ

j -' ' __Li -

11: ,I / I~ -...10 L

- I-++-

IF = \ 1J = \ l]f = \ r)l1 / = ~-II ~_jll ~_jll ~_j11L/ 11 I I • I I 11 • 11 • 11

-~ : __ I I I I I I

CD

® @

©

/

-

t

onespace

'-' one team. one vision.

NO. DATE REVISIONS

03. 17JAN2018 TENDER 02. 27NOV2017 PERMIT 01. 24NOV2017 COORDINATION NO. DATE ISSUED

•

RDZ ENGINEERS LTD 3 - 53. 0 R own t ree _Da i r·y Road Va u ghan , On t ar io L4 L 8H2 emc 1I : i n f o @ rdze n g . ca

CLIENT

SURREY PLAY CENTRE

ADDRESS 777 Bay Street, Toronto, Ontarto

DRAWING

PROJECT NUMBER DATE 17013 Jan 12, 2018

SCALE PLOTIED DATE

Jan 12, 2018

DRAWING NO.

1500 X 3001500 X 3001350 X 300

13

50

X

3

00

325 X 200

2500 X 300

8

8

300 X 250

40

0 X

2

50

350 X 200

R/A

3 3 3

3

3

CAP

5

CAP

R/A

13

EF-1

5

CAP

CAP

CAP

EXISTING R/A OPENING

CAP

2

6

CAP

C

150

24

CAPCAP

R/A

13

CAP

R/A

R/A

1

1

EF-2

EF-4

9

EF-3

8

7

E

500x250

35

VAV

7

100

240

200x150

200x150

300x250

200x150

15

0∅

20

0∅

200∅

15

0∅

15

0∅

15

0∅

20

0∅

250x150 250x200 250x150

30

0x2

50

CTE

A

150∅

35

A

200∅

57

A

150∅

47

A

150∅

47

A

200∅

47

A

200∅

47

A

200∅

47

A

200∅

57

A

200∅

57

#

150∅

35

A

150∅

35

A

200∅

47

A

200∅

47

OED

300x300

189

B

150∅

24

E

500x250

189

D

150∅

24

C

150∅

24

C

150∅

24

OED

200x200

59

B

150∅

24

200x150

A

200∅

47

A

200∅

47

C

150∅

35

C

150∅

35

C

150∅

35

C

150∅

35

C

150∅

35

C

150∅

35

A

200∅

47

B

150∅

35

B

150∅

12

E

500x250

35

200x150

OED

300x250

35

20

0x1

50

B

150∅

35

15

0∅

EXISTING R/A

OPENING

EXISTING R/A

OPENING

E

500x250

-

E

500x250

-

E

500x250

-

E

500x250

-

E

500x250

-

OED

200x200

59

C

150∅

35

C

150∅

35

OED

300x250

35

onespace unlimited inc.

LEVEL 27

HVAC

NEW WORK

1:50

M4

KEYED NOTES

24"x12" RETURN AIR DUCT OPENING IN WALL COMPLETE WITH 1" ACOUSTIC LINING.

DUCT TO BE MINIMUM 5 FT IN LENGTH.

PROVIDE RIGID DUCT FROM SUPPLY MAIN TO VAV BOX. MATCH VAV BOX INLET SIZE.

VACUUM AND CLEAN ALL EXISTING HOT WATER PERIMETER HEATERS AT

COMPLETION OF CONSTRUCTION. TYPICAL FOR ALL HEATERS.

4.BALANCE ALL DIFFUSERS AND VAV BOXES TO THE AIRFLOWS IDENTIFIED (TYPICAL).

25mm ARCHITECTURAL SLOT MIN. 5500mm LONG (BY OTHERS)

MEETING ROOM EXHAUST FAN EF-1 SUSPENDED ABOVE CEILING AND WIRED TO

VARIABLE SPEED CONTROLLER ON WALL. ALL DUCTWORK TO BE PROVIDED WITH

25mm THICK ACOUSTIC LINING.

KITCHEN EXHAUST FAN EF-2 SUSPENDED ABOVE CEILING AND WIRED TO ON/OFF

SWITCH IN KITCHEN.

COPY AREA EXHAUST FAN EF-3 SUSPENDED ABOVE CEILING AND WIRED TO ON/OFF

SWITCH IN COPY AREA.

SERVER ROOM EXHAUST FAN EF-4 SUSPENDED ABOVE CEILING COMPLETE WITH

WALL MOUNTED THERMOSTAT. THERMOSTAT TO BE SET TO MAINTAIN MAXIMUM 75°F

IN THE SPACE.

10.CLEAN AND RECALIBRATE ALL EXISTING AND RELOCATED THERMOSTATS (TYP)

11. MINIMUM SETTING FOR VAV BOXES SERVING INTERIOR ZONES IS 0%. MINIMUM

SETTING FOR VAV BOXES SERVING PERIMETER ZONES IS 30%.

12. CONTRACTOR TO TEST ALL EXISTING VAV BOXES TO ENSURE PROPER CONTROL

OPERATION. SUBMIT REPORT TO ENGINEER.

RELOCATED RETURN AIR SILENCER.

14 ON CALL FOR HEATING, VAV BOX TO MODULATE TO MINIMUM POSITION AND VAV BOX

CONTROLLER TO MODULATE PERIMETER HEATER CONTROL VALVE TO MAINTAIN

SPACE TEMPERATURE SETPOINT.

M4

1

LEVEL 27 - HVAC - NEW WORK

Scale: 1:50

J

0 ~

I I I I I I I

?Wl I I' / ii:

I . '

} "fT

·~ '

I .' I 3/

I~ _·1

I

I

.

'O· \ j I

I ... '

I I I

... m l('

I

I

t' ~ I > / ---

//

/

_/

/\

l,v

/

I I I

I I ~· ~

I .. · I . J __

[> C

~

K L

0

I .> I o

[

\

n 0

C\ n ' 0 /J)

C'1

-

-

I

r _____ --j

0

I

Ill

I II

J~[JrJJL. I

I

G)

@ ®

® ®

0 ® ®

@)

I

I ~ (Ii

7 I

M

I

/2', ·----

,r- 11

~ I

onespace

'-' one team. one vision.

NO. DATE REVISIONS

03. 17JAN2018 TENDER 02. 27NOV2017 PERMIT 01. 24NOV2017 COORDINATION NO. DATE

• CLIENT

ISSUED

RDZ ENGINEERS LTD 3 - 530 R own t ree Da i r·y Road Va u ghan, Ontar io L 4 L 8H2 emc i l : i n f o@rdze n g . ca

SURREY PLAY CENTRE

ADDRESS 777 Bay Street, Toronto, Ontarto

DRAWING

PROJECT NUMBER DATE 17013 Jan 12, 2018

SCALE PLOTIED DATE

Jan 12, 2018

DRAWING NO.

EXISTING DCW PIPING

IN CEILING SPACE

CTE

19Ø

S-1

DHWT

13Ø DCW & DHW, 32Ø

VENT, 38Ø DRAIN TO

SINK & DISHWASHER.

PROVIDE 13Ø DHW

CONNECTION TO

DISHWASHER

SANITARY PIPING IN CEILING

SPACE ON FLOOR BELOW.

COORDINATE AND CONFIRM FINAL

DRAIN TIE-IN LOCATION WITH

LANDLORD AND TENANT BELOW.

38Ø @ 1.0%

2

1

CONFIRM EXACT TIE-IN

LOCATION ON SITE

PROVIDE SEMI-RECESSED

TYPE SPRINKLER HEAD

(TYPICAL FOR ALL)

PROVIDE SEMI-RECESSED

TYPE SPRINKLER HEAD

(TYPICAL FOR ALL)

PROVIDE SEMI-RECESSED

TYPE SPRINKLER HEAD

(TYPICAL FOR ALL)

SAN

onespace unlimited inc.

LEVEL 27

PLUMBING & FIRE PROTECTION

NEW WORK

1:50

M5

KEYED NOTES

PROVIDE ELECTRIC DOMESTIC HOT WATER DHWT SUSPENDED ABOVE CEILING C/W

DRAIN PAN, SOLENOID VALVE ON DCW PIPING, AND LIQUITEK LEAK DETECTION

WATER SENSOR IN THE DRAIN PAN.

PROVIDE 1/2"∅ DHW AND DCW CONNECTIONS TO SINK AND DISHWASHER COMPLETE

WITH ISOLATION VALVES. SANITARY DRAINAGE TO CONNECT TO EXISTING DRAINAGE

MAIN IN CEILING SPACE OF FLOOR BELOW. VENT PIPING TO CONNECT TO NEAREST

EXISTING VENT MAIN ON THIS FLOOR.

3. COORDINATE ALL SPRINKLER HEADS AND PIPING WITH EXISTING SERVICES WITHIN

THE CEILING SPACE.

4. ALL SPRINKLER HEADS ARE TO BE NEW AND SHALL BE CENTERED ON THE CEILING

TILES. FLEXIBLE SPRINKLER PIPING IS NOT ACCEPTABLE.

5. REFER TO ARCHITECTURAL, INTERIOR DESIGN, MECHANICAL, ELECTRICAL, AND

STRUCTURAL DRAWINGS FOR REFLECTED CEILING PLANS, WALL AND STRUCTURE

LOCATIONS, AND TYPES OF CEILINGS, BULKHEADS, ETC. COORDINATE THE EXACT

LOCATION OF ALL SPRINKLER HEADS WITH THE STRUCTURE, DUCTING, LIGHTING,

ETC.

M5

1

LEVEL 27 - PLUMBING & FIRE PROTECTION - NEW WORK

Scale: 1:50

J K

I I I I I I I I

~ ii ii ii

l ... ' ... ml(' ~· ~ ~· -~ ·--[ ii DO OOL DO

/ ---- / ----r----

~ ~

~ \ A

I I I I I --

ii R ~EI I EP' ii ii ~ I Or

A L

., Ill ~ Nu 00

~ ii ~ ii 01 I

ii

I

I I ii ii

I~ i

I~ ~

1;Eff /

I/ \

RE 'IOtl ii rn 1 I

I ~ / I I

- \

I l ' -- -

016 ~ - I~

~ I/ ii

( - -H

/ \

\ ~ n 0 ---,

ii ii ~

~ ER\ E~ , l,v "

~ C n

[> ' 15 I C p O A #1 / ~

~ ...

t n - I f---H 11

~ ii -¢-,--._ CO Y A'' 6

~ ~ - - - ,- I

014

-

-

I

r _____ ______,

'O· \ j I

ETI GR

7 I 06

~

~

ii N

v ~ - -

~ ,.

ii ~

ii -¢­A

K•T• l

1 _,

I 13 Ill -

~ - . ,__ -

ii j J

L

\

"'

D _ II

II

/ ·

-¢- ii

A

---, -/ ~

~ ~ /

-

_ , ~ :)~

-b s -lLI

1 ~ v ii

K:1~ I

I -

f l AN< ;E DEPA· Ttv1 .:i~ I 07 I

I

M

-¢-M

G)

®

I

\ '

\ '

I

M

Fl .AJ'll ~i=, ,. FFI I E I OU

;_;;-OF ICE I

OF ICE I VI l I

2

-~

4

onespace

'-' one team. one vision.

NO. DATE REVISIONS

03. 17JAN2018 TENDER 02. 27NOV2017 PERMIT 01. 24NOV2017 COORDINATION NO. DATE

• CLIENT

ISSUED

RDZ ENGINEERS LTD 3 - 530 R own t ree Da i r·y Road Va u ghan, Ontar io L 4 L 8H2 emc i l : i n f o@rdze n g . ca

SURREY PLAY CENTRE

ADDRESS 777 Bay Street, Toronto, Ontarto

DRAWING

PROJECT NUMBER DATE 17013 Jan 12, 2018

SCALE PLOTIED DATE

Jan 12, 2018

DRAWING NO.

MECHANICAL SPECIFICATIONS

GENERAL

1. DRAWINGS AND SPECIFICATIONS ARE TO BE READ IN CONJUNCTION WITH DIVISION 01

GENERAL INSTRUCTIONS.

2. REFER TO THE LANDLORDS BASE BUILDING REQUIREMENTS AND TENANT DESIGN MANUAL

AND ADHERE TO CONSTRUCTION POLICIES AND GUIDELINES. BASE BUILDING STANDARDS AND

HOURS OF WORK SHALL APPLY.

3. DRAWINGS ARE CONSIDERED DIAGRAMMATICAL AND SHOW APPROXIMATE LOCATIONS OF

EQUIPMENT AND APPLICABLE SERVICES. CONTRACTOR IS RESPONSIBLE FOR COORDINATION

ON SITE WITH THE GENERAL CONTRACTOR, OTHER TRADES, AND SPECIALTY VENDORS, AND

FOR ACCURATE MEASUREMENTS OF THE BUILDING ON SITE. THE ASSOCIATED DRAWINGS ARE

NOT TO BE SCALED OR USED FOR PREFABRICATION WORK.

4. ALL WORK SHALL BE IN CONFORMANCE WITH THE ONTARIO BUILDING CODE, THE AUTHORITY

HAVING JURISDICTION, AND ALL OTHER APPLICABLE CODES AND STANDARDS (ASHRAE, CSA,

ETC.).

5. ALL MECHANICAL EQUIPMENT SHALL BE IN CONFORMANCE WITH ASHRAE 90.1 EFFICIENCIES

AND PERFORMANCE REQUIREMENTS. FAILURE TO MEET THESE STANDARDS WILL RESULT IN

REPLACEMENT OF THE EQUIPMENT AT THE CONTRACTORS COST.

6. APPLY FOR, OBTAIN, AND PAY FOR ALL PERMITS AND INSPECTIONS REQUIRED. TURN OVER

ALL INSPECTION CERTIFICATES FROM GOVERNING AUTHORITIES TO THE ENGINEER TO

CERTIFY THAT THE WORK MEETS THE REQUIREMENTS OF THE GOVERNING AUTHORITY.

7. WHERE THERE IS A DISCREPANCY BETWEEN THE DRAWINGS AND SPECIFICATIONS, INCLUDE

FOR THE MOST COSTLY ARRANGEMENT.

8. PROVIDE PROPER SHOP DRAWINGS FOR ALL EQUIPMENT AND SYSTEMS, BEARING A DATED

REVIEW STAMP FROM THE MECHANICAL CONTRACTOR IDENTIFYING THAT A REVIEW OF THE

SUBMISSION HAS BEEN COMPLETED BY THE CONTRACTOR. FAILURE TO DO SO WILL RESULT IN

THE SHOP DRAWING BEING RETURNED FOR RESUBMISSION. ALTERNATE EQUIPMENT ARE

ACCEPTABLE AS IDENTIFIED IN THE SPECIFICATIONS. IF ALTERNATE EQUIPMENT IS PROVIDED,

THE EQUIPMENT PERFORMANCE MUST MEET OR EXCEED THE SPECIFIED EQUIPMENT

PERFORMANCE. CONTRACTOR SHALL BE RESPONSIBLE FOR COORDINATION WORK

RESULTING FROM EQUIPMENT DIMENSION DIFFERENCES, WEIGHT, AND CONNECTION DETAILS.

9. MECHANICAL SHOP DRAWINGS WILL BE REVIEWED BY THE ENGINEER AND WILL BE RETURNED

TO THE CONTRACTOR WITHIN ONE (1) WEEK OF RECEIPT, BEARING THE ENGINEERS SHOP

DRAWING STAMP AND COMMENTS OF “REVIEWED”, “REVIEWED AS NOTED”, OR “REVISE AND

RESUBMIT”.

10. PROVIDE ALL REQUIRED CUTTING, PATCHING, FLASHING WORK, AND CLEAN UP ASSOCIATED

WITH YOUR SCOPE OF WORK.

11. CONTRACTOR SHALL BE RESPONSIBLE FOR MAINTAINING ACCURATE RED-LINE AS-BUILT

DRAWINGS ON SITE. CLEARLY MARK AND LABEL ANY CHANGES TO THE CONTRACT

DOCUMENTS, INCLUDING DIMENSIONED LOCATIONS OF INACCESSIBLE CONCEALED WORK,

LOCATIONS OF CONTROL DEVICES WITH IDENTIFICATION, UNDERGROUND PIPING AND

DUCTWORK WITH SIZES AND INVERT ELEVATIONS. OBTAIN AND PAY FOR ELECTRONIC

AUTOCAD DRAWINGS FROM THE CONSULTANT FOR THE PREPARATION OF AS-BUILT

DOCUMENTS IN AUTOCAD FORMAT.

12. PROVIDE TWO (2) OPERATING AND MAINTENANCE (O&M) MANUALS (PLUS ONE DIGITAL COPY)

TO THE CONSULTANT FOR REVIEW, IN A THREE RING BINDER WITH TABLE OF CONTENTS AND

TABS INCLUDING A FRONT COVER, INTRODUCTION SHEET, COPY OF EACH REVIEWED SHOP

DRAWING, OPERATING AND MAINTENANCE DATA FOR EACH PIECE OF EQUIPMENT, START-UP

AND VERIFICATION TEST REPORTS, AS-BUILT DRAWINGS, AIR AND WATER BALANCING

REPORTS, AND WARRANTIES. SUBMIT MANUALS TO THE ENGINEER FOR REVIEW.

13. PROVIDE ONE (1) YEAR WARRANTY ON ALL MECHANICAL WORK IN ACCORDANCE WITH THE

CONTRACT DOCUMENTS AND FREE FROM DEFECTS FROM THE DATE OF ISSUE OF A

CERTIFICATE OF SUBSTANTIAL PERFORMANCE FOR THE WORK. REPAIR AND/OR REPLACE ANY

DEFECTS THAT APPEAR IN THE WORK DURING THE WARRANTY PERIOD WITHOUT ADDITIONAL

EXPENSE TO THE OWNER.

14. PROVIDE ON-SITE TRAINING FOR THE OWNER AND OPERATIONS PERSONNEL PRIOR TO

TURNOVER FOR ALL NEW EQUIPMENT AND CONTROLS. ALL EQUIPMENT REQUIRING

MAINTENANCE SHALL BE IDENTIFIED AND LOCATION REVIEWED WITH THE OWNER.

15. PROVIDE TEMPORARY 1” FILTERS ON ALL BASE BUILDING RETURN OPENINGS WITHIN THE

AREA OF WORK DURING CONSTRUCTION. REPLACE FILTERS WEEKLY AND REMOVE UPON

COMPLETION OF CONSTRUCTION.

16. CHANGE NOTICE QUOTATIONS FOR EXTRA OR DELETED WORK SHALL BE SUBMITTED FOR

APPROVAL PRIOR TO PROCEEDING. QUOTATIONS ARE TO BE DETAILED AND INCLUDE

ITEMIZED BREAKDOWN OF ALL MATERIALS AND LABOUR, PRICED IN ACCORDANCE WITH THE

MECHANICAL CONTRACTORS ASSOCIATION RATES, LESS 25%. OVERHEAD AND PROFIT,

UNLESS OTHERWISE SPECIFIED IN DIVISION 01, ARE TO BE SET AT A MAXIMUM OF 7% AND 5%

RESPECTIVELY. FAILURE TO SUBMIT THE REQUIRED DOCUMENTATION WILL RESULT IN

REJECTION.

17. PRIOR TO OBTAINING PERMIT SIGN OFF AND/OR SUBSTANTIAL COMPLETION, SUBMIT THE

FOLLOWING FOR REVIEW: AS-BUILT DRAWINGS; FINAL AIR AND WATER BALANCING REPORT

INCLUDING ALL DEFICIENCIES COMPLETED; NFPA 13 CONFORMANCE LETTER; FIRE STOPPING

COMPLETENESS LETTER; FIRE DAMPER TEST REPORT; BACKFLOW DEVICE TEST REPORT; AND,

WARRANTY.

HVAC (SHEETMETAL)

1. ALL DUCTWORK SHALL BE CONSTRUCTED IN ACCORDANCE WITH THE LATEST SMACNA AND

ASHRAE STANDARDS AND RECOMMENDATIONS.

2. DUCTWORK TO BE GALVANIZED SHEET METAL UNLESS OTHERWISE INDICATED. PROVIDE

SATIN COAT FINISH FOR DUCTWORK TO BE PAINTED, G60 COATING ON ALL OTHER DUCTWORK.

3. SEAL ALL JOINTS IN SUPPLY AND EXHAUST AIR DUCTWORK WITH TRANSCONTINENTAL MP

DUCT SEALER OR EQUIVALENT.

4. PROVIDE BALANCING DAMPERS FOR ALL NEW AND EXISTING DUCT BRANCHES AS REQUIRED

TO PROVIDE A FULLY BALANCED SYSTEM. DAMPERS SHALL BE FREE TO MOVE IN EITHER

DIRECTION WITHOUT BINDING AND SHALL NOT RATTLE. INSTALL WITH SUFFICIENT CLEARANCE

FOR CEILING ACCESS AND PROVIDE ACCESS DOORS AS REQUIRED.

5. PROVIDE DYNAMIC TYPE FIRE DAMPERS WHERE INDICATED ON THE DRAWINGS AND WHERE

DUCTWORK PASSES THROUGH CONSTRUCTION WITH A FIRE RATING, COMPLETE WITH

APPROVED ACCESS DOORS. FIRE DAMPERS SHALL BE IN ACCORDANCE WITH ULC LISTINGS

AND NFPA 90A REQUIREMENTS.

6. DUCTWORK SHALL BE INSULATED TO MEET ASHRAE 90.1 AND THE GOVERNING AUTHORITY

REQUIREMENTS. INSULATE DUCTWORK WITH JOHNS MANVILLE “MICROLITE EQ FSK” FLEXIBLE

BLANKET TYPE INSULATION WITH FSK FACING, OR EQUAL, OR JOHNS MANVILLE “800 SERIES

SPIN-GLAS” FSK FACE BOARD TYPE INSULATION.

A. DUCTWORK CONCEALED ABOVE CEILINGS SHALL BE INSULATED WITH FLEXIBLE BLANKET

TYPE. EXPOSED DUCTWORK SHALL BE INSULATED WITH BOARD TYPE.

B. INSULATE SUPPLY AIR DUCTWORK INSIDE THE BUILDING 40MM (1-1/2”) THICK

C. INSULATE EXHAUST AIR DUCTWORK FROM EXTERIOR PENETRATION TO MINIMUM 3 M (10 FT)

WITHIN THE BUILDING, 50MM (2”) THICK

D. INSULATE OUTSIDE AIR DUCTWORK AND PLENUMS, 50MM (2”) THICK

E. EXTERIOR DUCTWORK, 50MM (2”) THICK

F. DO NOT INSULATE DUCTWORK EXPOSED WITHIN THE SPACE IT SERVES.

7. ACOUSTIC DUCT LINING SHALL BE MINIMUM 25MM (1”) THICK MEETING 25/50 FLAME SPREAD

AND SMOKE DEVELOPED RATINGS, NFPA 90A, ASTM C1071 AND ASTM G21 REQUIREMENTS, AND

SHALL BE COATED WITH AN ANTIMICROBIAL AGENT SO AS TO NOT SUPPORT MICROBIAL

GROWTH.

8. MAKE GOOD ALL INSULATION WHEN CONNECTING TO EXISTING DUCTWORK.

9. FLEXIBLE DUCTWORK SHALL BE EQUAL TO FLEXMASTER “TRIPLE LOCK” ALUMINUM AIR DUCT,

MAXIMUM LENGTH OF 1.8 M (6 FT), AND OF THE SAME SIZE AS THE DIFFUSER NECK. WHERE

LENGTH OF DUCT BETWEEN MAIN AND DIFFUSER IS LONGER THAN 1.8 M (6 FT), PROVIDE RIGID

DUCT FROM DUCT MAIN TO LIMIT FLEX DUCT LENGTH.

10. PROVIDE GRILLES AND DIFFUSERS OF NEW QUALITY TO THE SPECIFICATIONS INDICATED ON

THE DRAWINGS. MATCH BASE BUILDING STANDARDS WHERE REQUIRED. COORDINATE FINAL

INSTALLATION LOCATION WITH THE ARCHITECTURAL REFLECTED CEILING PLAN AND LIGHTING

AND SPRINKLER LAYOUTS.

11. PROVIDE FLEXIBLE CONNECTIONS BETWEEN DUCTWORK AND ALL FANS, ERVS, ETC.

12. TEST, ADJUST, AND BALANCE ALL AIR SYSTEMS TO OBTAIN THE DESIGN AIR QUANTITIES

NOTED TO WITHIN 10%. MARK THE FINAL POSITION ON ALL BALANCING DAMPERS AND

ADJUSTABLE AIR TURNING DEVICES. SUBMIT BALANCING REPORT TO THE ENGINEER FOR

REVIEW AND INCLUDE FOR ADJUSTMENTS AS DIRECTED BY THE ENGINEER TO MEET THE

DESIGN REQUIREMENTS. WORK SHALL BE PERFORMED BY THE OWNER'S TESTING AND

BALANCING CONTRACTOR OR BY A CONTRACTOR APPROVED BY THE OWNER. THE COST FOR

BALANCING SHALL BE CARRIED BY THE MECHANICAL CONTRACTOR. MECHANICAL

CONTRACTOR SHALL BE AVAILABLE TO MAKE ADJUSTMENTS TO THE SYSTEM, REPAIR

DUCTWORK, ETC. DURING BALANCING. ADJUST OR REPLACE FAN SHEAVES AS REQUIRED TO

OBTAIN DESIGN AIR QUANTITIES.

13. PROVIDE ALL CONTROLS, WIRING, AND APPURTENANCES NECESSARY FOR THE COMPLETE

AND OPERATING SYSTEMS. CONNECT ALL ROOM AND EQUIPMENT THERMOSTATS AS

NECESSARY.

PLUMBING AND DRAINAGE

1. PROVIDE ALL PLUMBING SYSTEMS AS PER THE DRAWINGS AND SPECIFICATIONS, ONTARIO

BUILDING CODE AND PLUMBING CODE, AND BY LOCAL BY-LAWS.

2. MAKE ALL WATER, WASTE, AND VENT PIPING CONNECTIONS AS REQUIRED. PROVIDE VENTING,

TRAPS, AND PRIMING AS PER THE APPLICABLE APPLICATIONS.

3. ALL SANITARY DRAIN, STORM RAIN WATER LEADERS, AND MAIN VENT STACKS SHALL BE CAST

IRON COMPLETE WITH MJ JOINTS. BRANCH VENTS MAY BE COPPER PIPING, AND SANITARY

DRAINS UNDER 75 MM (3”) AND CONDENSATE DRAINS MAY BE HARD TEMPERED COPPER

DRAINAGE TUBE (DWV).

4. UNLESS OTHERWISE NOTED, SLOPE ALL 75 MM (3”) DRAINAGE PIPING AT 2% SLOPE AND ALL 100

MM (4”) AND LARGER DRAINAGE PIPING AT 1% SLOPE.

5. VERIFY ALL EXISTING AND NEW DRAINAGE PIPING INVERTS PRIOR TO COMMENCING WITH

WORK.

6. PROVIDE CLEANOUTS FOR ALL DRAINAGE PIPING WHERE INDICATED ON THE DRAWINGS AND

AS REQUIRED PER LOCAL CODES. CLEANOUTS FOR PIPING 75 MM (3”) AND SMALLER SHALL BE

OF THE SAME SIZE AS THE PIPE. CLEANOUTS FOR PIPING 100 MM (4”) AND LARGER SHALL BE

MINIMUM 100 MM (4”) IN SIZE.

7. PROVIDE NEW PLUMBING FIXTURES OF FIRST QUALITY, CLEANED, AND IN PERFECT CONDITION.

FINAL LOCATION OF ALL NEW PLUMBING FIXTURES AND EQUIPMENT SHALL BE COORDINATED

WITH THE FINAL ARCHITECTURAL LAYOUT. COORDINATE ALL ROUGH IN REQUIREMENTS WITH

THE GENERAL CONTRACTOR PRIOR TO PERFORMING WORK. INSTALL ALL FIXTURES IN

ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION INSTRUCTIONS.

8. PROVIDE TRAP SEAL PRIMER FOR ALL NEW FLOOR DRAINS AND HUB DRAINS.

9. SUPPORT COPPER PIPING 25 MM (1”) AND SMALLER WITH INDEPENDENT SUPPORTS EVERY 1.8

M (6 FT) AND COPPER PIPING LARGER THAN 25 MM (1”) EVERY 2.4 M (8 FT). PROVIDE

INDEPENDENT SUPPORTS EVERY 2.4 M (8 FT) FOR ALL CAST IRON PIPING. PROVIDE OVERSIZED

PIPE SADDLES TO ACCOMMODATE PIPING INSULATION. DO NOT PROVIDE INSULATION OVER

HANGERS OR SUPPORTS.

10. PIPING SHALL BE INSULATED TO MEET ASHRAE 90.1 AND THE GOVERNING AUTHORITY

REQUIREMENTS. INSULATE PIPING WITH JOHNS MANVILLE “MICRO-LOK” FIBER GLASS PIPING

INSULATION WITH REINFORCED VAPOR RETARDER FACING AND FACTORY APPLIED CLOSURE

SYSTEM OR EQUAL.

A. DOMESTIC COLD WATER PIPING LESS THAN 100 MM (4”), 25 MM (1”) THICK

B. DOMESTIC COLD WATER PIPING 100 MM (4”) AND LARGER, 40 MM (1-1/2”) THICK

C. DOMESTIC HOT WATER PIPING LESS THAN 40 MM (1-1/2”), 25 MM (1”) THICK

D. DOMESTIC HOT WATER PIPING 40 MM (1-1/2”) AND LARGER, 40 MM (1-1/2”) THICK

E. HORIZONTAL STORM DRAINAGE PIPING FROM ROOF DRAINS TO THE MAIN VERTICAL RISER,

25 MM (1”) THICK

F. CONDENSATE DRAINAGE PIPING FROM AIR CONDITIONING EQUIPMENT TO MAIN VERTICAL

RISER OR INDIRECT DRAINAGE POINT, 25 MM (1”) THICK

G. INSTALL INSULATION CONTINUOUS THROUGH WALLS AND PARTITIONS.

11. INCLUDE FOR PIPE FREEZING AS REQUIRED TO CONNECT TO EXISTING PIPING SYSTEMS

WHERE ISOLATION VALVES ARE NOT AVAILABLE OR DO NOT HOLD.

SPRINKLERS AND FIRE PROTECTION

1. ALL SPRINKLER AND FIRE PROTECTION WORK SHALL BE TO THE APPROVAL OF THE

OWNERS/LANDLORDS INSURANCE UNDERWRITER AND SHALL BE IN ACCORDANCE WITH THE

ONTARIO BUILDING CODE, ONTARIO FIRE CODE, NFPA, AND ALL OTHER GOVERNING

AUTHORITIES. WORK SHALL BE PERFORMED BY THE LANDLORDS APPROVED SPRINKLER

CONTRACTOR.

2. ALL SPRINKLER AND FIRE PROTECTION SYSTEMS SHALL REMAIN IN SERVICE AT ALL TIMES

DURING CONSTRUCTION. WHERE SHUT DOWNS ARE REQUIRED PROVIDE 48 HOURS NOTICE

TO THE LANDLORD AND LOCAL AUTHORITIES AND OBTAIN APPROVAL PRIOR TO PROCEEDING.

3. PROVIDE A COMPLETE, HYDRAULICALLY SIZED AUTOMATIC SPRINKLER AND FIRE PROTECTION

SYSTEM IN ACCORDANCE WITH NFPA 13. MODIFY EXISTING HYDRAULICALLY SIZED SPRINKLER

AND FIRE PROTECTION SYSTEM AS REQUIRED TO SUIT THE SCOPE OF WORK FOR THE

PROJECT. PROVIDE COVERAGE AS INDICATED IN THE DRAWINGS AS WELL AS WHERE

REQUIRED PER NFPA 13 AND THE LOCAL AUTHORITIES.

4. SUBMIT SHOP DRAWINGS INCLUDING HYDRAULIC CALCULATIONS, FLOOR PLANS, AND

EQUIPMENT CUT SHEETS TO THE ENGINEER AND AUTHORITY HAVING JURISDICTION FOR

REVIEW PRIOR TO COMMENCING WORK. SHOP DRAWINGS SHOULD BE STAMPED BY A

QUALIFIED ENGINEER IN GOOD STANDING WITH THE PROFESSIONAL ENGINEERS OF ONTARIO

AND CURRENTLY PRACTICING IN THE FIRE PROTECTION INDUSTRY.

5. NEW SPRINKLER HEADS SHALL MATCH BASE BUILDING STANDARDS.

6. REMOVE AND ADD NEW SPRINKLER HEADS AS INDICATED AND REQUIRED TO PROVIDE

COVERAGE TO THE NEW LAYOUT. DO NOT REUSE SPRINKLER HEADS.

7. SPRINKLER PIPING SHALL BE SCHEDULE 40 BLACK STEEL PIPING COMPLETE WITH ALL

FITTINGS, HANGERS, AND APPURTENANCES. ALL PIPING TO SPRINKLER HEADS SHALL BE

HARD PIPED.

8. MAINTAIN GENERALLY A GOOD APPEARANCE OF CEILING SYSTEMS. COORDINATE LOCATIONS

OF SPRINKLER HEADS WITH ALL DIFFUSERS, LIGHTING FIXTURES, AND OTHER ARCHITECTURAL

ELEMENTS.

9. PROVIDE NEW FIRE EXTINGUISHERS WHERE SHOWN ON THE PLANS OR WHERE REQUIRED BY

CODE. NEW EXTINGUISHERS SHALL MATCH EXISTING BASE BUILDING STANDARDS.

10. UNLESS OTHERWISE NOTED, MOUNT FIRE EXTINGUISHERS WHERE SHOWN ON THE PLANS

SUCH THAT THE CENTERLINE IS APPROXIMATELY 1.2 M (4 FT) ABOVE FINISHED FLOOR.

11. SUBMIT A SEPARATE PRICE FOR THE ADDITION AND/OR DELETION OF ONE (1) SPRINKLER HEAD

OF EACH TYPE. ANY NUMBER OF ADDITIONS OR DELETIONS CAN BE INCORPORATED.

12. SUBMIT A SEPARATE PRICE FOR THE ADDITION AND/OR DELETION OF 3.0 M (10 FT) OF PIPING

COMPLETE WITH FOUR (4) ELBOWS, HANGERS, ETC. FOR REROUTING OF BRANCH PIPING AS

REQUIRED. WORK SHALL ONLY PROCEED WHEN INSTRUCTED.

onespace unlimited inc.

SPECIFICATIONS

N/A

M6

onespace

'-' one team . one vision.

NO. DATE REVISIONS

03. 17JAN2018 TENDER 02. 27NOV2017 PERMIT 01. 24NOV2017 COORDINATION NO. DATE ISSUED

• RDZ ENGINEERS LTD

CLIENT

3 - 530 R own t ree D a i r·y Road Va u g h an, Ontar io L 4 L 8H2 emc i l : i n f o@rdze n g . ca

SURREY PLAY CENTRE

ADDRESS 777 Bay Street, Toronto, Ontarto

DRAWING

PROJECT NUMBER

17013

SCALE

DATE Jan 12, 2018

PLOTIED DATE

Jan 12, 2018

DRAWING NO.

x

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

SYMBOL

CJ,,~,

I///. ~~l

I - I

0,0

@

D

$,$,$

--0 '-o-----{[]]. []

--o'-o-, o

DWG No.

E1

E2

E3

E4

E5

E6

E7

EB

DESCRIPTION

LIGHTING

FLUORESCENT LUMINAIRES. SIZE AS SHOWN ON PLANS.

EXISTING RECESSED FLUORESCENT LUMINAIRE TO BE REMOVED OR RELOCATED. REFER TO LIGHTING LUMINAIRE SCHEDULE

EXISTING RECESSED FLUORESCENT LUMINAIRE TO REMAIN. REFER TO LIGHTING LUMINAIRE SCHEDULE

EXISTING RECESSED FLUORESCENT LUMINAIRE IN RELOCATED POSITION.

NEW RECESSED FLUORESCENT LUMINAIRE FIXTURE TO MATCH EXITSING MANUFACTURER.

INCANDESCENT OR LED LUMINAIRE - CEILING MOUNTED OR FLOOR MOUNTED

PENDANT LIGHTING

LUMINAIRES ON EMERGENCY LIGHTING CIRCUIT.

SWITCHING SINGLE POLE, SINGLIE THROW TOGGLE SWITCH (' 3' DENOTES 3-WAY, '4' DENOTIES 4-WAY, 'PL' DENOTES PILOT LIGHT, 'LV' DENOTIES LOW VOLTAGE, 'K' DENOTES KEY OPERATIED).

LUTRON DIMMER ON/OFF, SLIDER TYPE. LED 0-10VDC DVSTV-WH. DIMMER TO BE COMPATIBLE WITH DIMMABLE LED DRIVER.

OCCUPANCY SENSOR, WALL CEILING MOUNTED

DAYLIGHT HARVESTING PHOTOSENSOR

PHOTOCELL

PUSHBUTTON

POWER DEVICES CIRCUIT BREAKER

FUSED DISCONNECT SWITCH

UNFUSED DISCONNECT SWITCH

FEEDER

POWER TRANSFORMER

ELECTRICAL DRAWING LIST

DESCRIPTION

ELECTRICAL LIEGEND OF SYMBOLS, DRAWING LIST & GENERAL NOTES

ELECTRICAL SPECIFICATIONS

ELECTRICAL LIGHTING FLOOR PLAN

ELECTRICAL POWER & SYSTEMS FLOOR PLAN

ELECTRICAL DEMOLITION PLAN

ELECTRICAL PANEL SCHEDULIE

ELECTRICAL DETAILS

LUMINAIRE SCHEDULE

SYMBOL

c¢j)c

qp

C

9 ~.$v

-··-

• • •

SURREY PLACE CENTRE 777 BAY

TORONTO, STREET ONTARIO

ELECTRICAL LEGEND

DESCRIPTION SYMBOL DESCRIPTION SYMBOL

15A-125V 1PH-3W GROUNDED DUPLIEX RECEPTACLE, WAUL MOUNTED

15A-125V, WAILL MOUNTED RECEPTACLE ON DEDICATED CIRCUIT

SINGLE RECEPTACLE, 30A-2P, 20BV TWISTLOCK SUSPENDED C/W REQUIRED WIRING, FLEX WIREMESH STRAIN RELIEF /GRIP 3#10 AWG.

15A-125V 1PH-3W GROUNDED QUAID RECEPTACLE IN COMMON BOX, WAILL MOUNTED

15A-150V-3W GROUNDED DUPLEX RECEPTACLE MOUNTED ABOVE COUNTER FOR GENERAL POWER CONNECTION

SINGLE RECEPTACLE, 15A-1 P, 120V SUSPENDED C/W REQUIRED WIRING. FLIEX WIREMESH STRAIN RELIEF /GRIP.

15A-125V 2P-3W GROUNDED DUPLEX RECEPTACLE, WAILL MOUNTED SPLIT WIRED.

15A-125V 2P-3W GROUNDED DUPLEX RECEPTACLE, COUNTIER HEIGHT SPLIT WIRED.

15A-125V 1 PH-3W GROUNDED DUPLEX RECEPTACLE MOUNTED IN FLUSH FLOOR BOX.

15A-125V 1 PH-3W GROUNDED QUAD RECEPTACLE MOUNTIED IN FLUSH FLOOR BOX.

15A-125V 1PH-3W GROUNDED DUPLEX RECEPTACLIE CEILING MOUNTED

ELECTRICAIL JUNCTION BOX

CONTACTOR.

RELAY

POWER DIRECT CONNECTION TO EQUIPMENT AS INDICATED.

ELECTRICAL CONNECTION TO EQUIPMENT AS INDICATIED.

MOTOR STARTER AND VARIABLE SPEED CONTROLLIER SUPPLIED BY DIV. 15, WIRED AND INSTAULED BY DIV. 16.

DENOTES 2 COMPARTMENTS WIREMOLD RACEWAY C/W NUMBER OF POWER AND COMMUNICATION RECEPTACLE OUTLETS AND OR PROVISION FOR SYSTEM FURNITURE SYSTEM. G4000 SERIES AS NOTED ON DRAWING PLAN.

BPI OPENING ON WIREMOLD SYSTIEM.

WAILL MOUNTED BASE POWER IN FOR SYSTEMS FURNITURE'S POWER AND COMMUNICATION PROVISION. REFER TO DETAIL.

INCOMING SERVICES FOR POWER, COMMUNICATION AND AV SYSTEMS.

POWER POLE TWO COMPARTMENTS FOR POWER AND COMMUNICATION. ALUMINUM C/W 3 DUPLIEX RECEPTACLIES OUTLETS, 20A, 120V AND PROVISION FOR COMMUNICATION.

CEILING MOUNTED BASE POWER IN FOR SYSTEMS FURNITURE'S POWER AND COMMUNICATION PROVISION. REFER TO DETAIL.

[l~

['J

a Si!

" ~.</ t;l, ~

8,~

g;i

Q

1 t-~--

@,@,~,ISl

B 0

... v"v llzl

LIFE SAFETY SYSTEMS FIRE ALARM HORN - CEILING OR WALL MOUNTED

FIRE ALARM BELL - CEILING OR WALL MOUNTED

FIRE ALARM HORN/STROBE COMBINATION STROBE

FIRE ALARM MANUAIL PUUL STATION.

CEILING/WAUL MOUNTED FIRE ALARM HORN/STROBE COMBINATION

FIREMAN'S HANDSET.

F.A. HEAT DETECTOR (RATIE OF RISE) -CEILING OR WAILL MOUNTIED

120V SMOKE AILARM - CEILING OR WAUL MOUNTED

F.A. SMOKE DETECTOR - CEILING OR WAILL MOUNTED

FIRE AILARM CONTROL PANEL

FIRE ALARM ANNUNCIATOR PANEL C/W GRAPHIC

EMERGENCY LIGHTING BATTERY UNIT C/W UNIT MOUNTED LIED HEADS.

REMOTE EMERGENCY LIED DOUBLE HEAIDS

REMOTE EMERGENCY LED SINGLE HEAD

EXIT SIGN C/W TWO EMERGENCY LED HEADS AND BATTERY UNIT

CEILING OR WAUL MOUNTED EXIT LIGHT, ARROW(S) INDICATE DIRECTION

FIRE ALARM EVAC SPEAKER- RECESSED CEILING MOUNTED

SPEAKERS FOR MUSIC/PAGING

COMMUNICATION SYSTEMS {PIY 16 ID PROVIDE EMPJY CONPLJIJS P\JI I WIRES AND rnm ET RACK BOXES PNI Y CARI ING AND DEVICES 8Y TEI ECOMMIJNICATION CONTRACTOR) TELEPHONE WALL OUTLET C/W 3/4"C HOME RUN TO NEAREST IT ROOM

DATA OUTLET - WALL, ROOF OR CEILING MOUNTED C/W 3/4"C HOME RUN TO NEAREST IT ROOM. MAXIMUM 4 DROPS PER WALLBOX - IF MORE THAN CONTRACTOR TO PROVIDE MULTI-GANG BOX AND FACEPLATE TO ACCOMMODATE AS REQUIRED. NUMBER BESIDES DENOTES QUANTITY OF DATA JACKS.

COMBINATION DATA & TELEPHONE OUTLET - WALL MOUNTED C/W 3/4"C HOME RUN TO NEAREST IT ROOM. MAXIMUM 4 DROPS PER WALLBOX - IF MORE THAN CONTRACTOR TO PROVIDE MULTI-GANG BOX AND FACEPLATE TO ACCOMMODATE AS REQUIRED •

WALL MOUNTED CLUSTER OF OUTLETS. REFER TO DETAIL DRAWING FOR REQUIREMENT

PAY PHONE WAUL OUTLET C/W 3/4"C HOME RUN TO NEAREST IT ROOM

WAl..1/FLOOR MOUNTED OUTL.Er VGA, HDMI. 1 "C CONDUIT UP TO EACH WALL/f'LOOR MOUNTED FLOOR BOX LOCATION.

GENERAL NOTES

1. THIS IS A MASTER LIEGEND. NOT AILL SYMBOLS SHOWN MAY BE USED ON THIS PROJECT.

2. THESE DRAWINGS ARE DIAGRAMMATIC ONLY. BEFORE ANY ELECTRICAL EQUIPMENT IS ROUGHED IN. ITS EXACT LOCATION MUST BE DETERMINED FROM THE ARCHITIECTURAL PLANS AND INTERIOR DESIGNER DRAWINGS DETAILS AND ELEVATIONS OR DETAILS ON THE ELIECTRICAL DRAWINGS. WHERE THIS DETAILED INFORMATION IS NOT SHOWN ON THE DRAWINGS, VERIFY THE EXACT LOCATION ON SITE.

3. AILL MEASUREMENTS SHOWN ON THE DRAWINGS ARE IN METRIC MILLIMETRE(S) OTHERWISE INDICATIED.

15. CO-ORDINATE EXACT LOCATION AND RATING OF AILL MOTORS AND STARTERS WITH MECHANICAL TRADE CONTRACTOR PRIOR INSTAULATION OF CONDUIT AND WIRING.

16. DIV.16 TO COORDINATE WITH DIV.15 ON SITE FOR THE EXACT LOCATIONS AND INSTAULATION DETAILS FOR AUL DUCT SMOKE DETECTORS PRIOR TO INSTAILLATION.

17. RECEPTACLES SHALL BE MOUNTED DIRECTILY BELOW PULLSTATION AT EXITS (WHERE SHOWN TOGETHER) AND DIRECTLY BELOW SWITCHES AT ROOM ENTRANCES.

18. ALL ELECTRICAL OPENINGS SHOWN ARE MINIMUM SIZE ONLY. ELECTRICAL CONTRACTOR TO DETERMINE, VERIFY AND SUBMIT SCALED ROUGH-IN DRAWINGS FOR ALL ELECTRICAL OPENINGS TO CONSULTANTS FOR REVIEW PRIOR TO CONSTRUCTION.

[ill

lccwKI

[GJ

1:0 [ill]

IT[J

[}ill]

IJII

-

wr GFI

JB

AFF

EX

REL

ER

DEL

N

QC

TS

NL

WC

Cl)

HD

FR

ST

ow MW

4. DETAILS ARE INTIENDED TO BE FOR GENERAIL ARRANGEMENTS ONLY. THEY DO NOT SHOW AUL NECESSARY COMPONENTS, BUT ARE MERELY A GUIDE AS TO THE ORIENTATION OF EQUIPMENT WHICH IS REQUIRED.

19. AT ALL FLOOR/WAUL OPENINGS AND SLEEVES FOR ELECTRICAL USE, DIV. 16 SHALL PROVIDE PROPER RE-ENTRY TYPE FIRE SEALANT/BARRIER MATERIAL AS DEFINED AND SPECIFIED.

5. PROVIDE AUL GROUNDING IN ACCORDANCE WITH THE RULES AND REGULATIONS OF AUTHORITIES HAVING JURISDICTION.

6. INDICATION ON SWITCH SAME AS FOR OUTLET(S) IT CONTROLS.

7. ARROWHEAD ON CONDUIT INDICATES HOMERUN TO PANEL

8. ON AUL CONDUIT RUNS OF 33M OR MORE, INSTAILL PULLBOXES WHERE REQUIRED TO SUIT SITE CONDITIONS.

9. WHERE CONDUITS CROSS EXPANSION JOINTS OF BUILDING AS SHOWN ON ARCHITECTURAIL DRAWINGS, PROVIDE APPROVED TYPE EXPANSION JOINTS COMPLIETE WITH GROUNDING STRAPS AND CLAMPS.

1 O. CO-ORDINATE ALL SWITCH AND RECEPTACLE LOCATIONS WITH ARCHITECTURAIL AND MECHANICAL DRAWINGS PRIOR TO INSTALLATION.

11. INSTAUL AILL LIGHTING LUMINAIRES CONDUIT, HEAT DETECTORS ETC., IN MECHANICAIL ROOMS, BOILER ROOMS, FAN ROOMS AND MACHINE ROOM AFTER MECHANICAL EQUIPMENT, DUCTS, PIPES, ETC., ARE IN PLACE. LOCATE LUMINAIRE WITH CHAIN HANGERS TO BEST POSSIBLIE AIDVANTAGE.

12. VERIFY EXACT LOCATION OF ALL FLOOR OUTILETS BEFORE INSTALLATION OF CONDUIT

13. WHERE SITE CONDITIONS INDICATE CONFLICT BETWEEN THE INSTALLATION OF ELECTRICAL EQUIPMENT AND/OR MECHANICAL EQUIPMENT OR STRUCTURAIL MEMBERS, PREPARE COMPLIETE INTERFERENCE DRAWINGS FOR DISCUSSION WITH RESPECTIIVE CONSULTANTS.

20. DIVISION 16 TO CUT WAUL FOAM TO ACCOMMODATE AUL CONDUITS AND JUNCTION BOXES THROUGHITOUT ALL EXTERIOR WALLS. COORDINATE WITH GENERAL CONTRACTOR PRIOR TO INSTAULATION.

21. CONDUIT ROUTES ARE DIAGRAMMATIC ONLY. AT EXPOSED PRECAST SLAB RUN CONCEALED IN THE WALLS.

22. ALL RECESSED OR PENDANT LIGHITING FIXTURES ARE TO BE SUPPORTED WITH A SUSPENDED WIRE. DO NOT USE CEILING STRUCTURE FOR SUPPORT.

23. CIRCUITING SHOWN ARE FOR GROUPING PURPOSES ONLY. DIVISION 16 TO VERIFY EXISTING CIRCUITS BEING USED FOR POWER & LIGHTING TO EACH EXISTING PANELS. DIVISION 16 TO PROVIDE NEW CIRCUITS C/W WIRING AND CONDUIT TO MEET TO NEW POWER & LIGHTING LAYOUT & CIRCUITING REQUIREMENT.

24. DIVISION 16 TO ENSURE THAT ALL EXISTING ELIECTRICAL CIRCUITS FEEDING EXISTING ELECTRICAIL & MECHANICAIL EQUIPMENT /DEVICE WHICH ARE TO REMAIN ARE PROPERLY WORKING AND OPERATIONAL PROVIDE NEW FEEDERS AS REQUIRED TO SUIT.

25. NEW SWITCHES TO MATCH EXISTING TYPE AND COLOR, DECORA TYPE.

26. NEW RECEPTACLE OUTLET SHALL BE DECORA TYPE SERIES.

27. PROVIDE REQUIRED FIRE STOPPING SEALANT TO AILL FLOOR AND WALL OPENINGS (FLOOR AND CEILING) WHEN CONDUITS PASSING BETWEEN FIRE RATIED FLOOR/CEILING WALLS.

14. REFER TO ARCHITECTURAL REFLIECTED CEILING PLANS AND ELEVATIONS FOR EXACT 28. COMMUNICATION CABLING BY OTHERS (COMMUNICATION CONTRACTOR). LOCATIONS OF LUMINAIRES, SPEAKER, DETECTORS AND CEILING MOUNTED RECEPTACLES. CONDUIT, JUNCTION BOXES, INSERTS, PULLWIRES BY DIV.16.

DESCRIPTION

MISCELLANEOUS SYSTEMS

SECURITY ENTRY CONTROL BUTTON

CCTV SECURITY CAMERA. PROVIDE NECESSARY JUNCTION BOX C/W 1 "C BACK TO MAIN SECURITY CONTROL PANEL LOCATION AT IT ROOM

SECURITY (PAN, TILT & ZOOM) CAMERA

SECURITY ELIECTRIC STRIKE LOCATION

DURESS ALARM BUTTON

SECURITY DOOR CONTACT LOCATION

SECURITY CARD READER

DOOR BELL PUSHBUTTON

DOOR RELIEASE PUSHBUTTON FOR MAGLOCK SYSTEM

ELECTRO MAGNETIC LOCK

SECURITY MOTION DETECTOR

WIRELIESS ACCESS POINT IN CEILING. PROVIDE REQUIRED JUNCTION BOX AND COMMUNICATION OUTLIET, SURFACE MOUNT. EXACT LOCATION TO BE COORDINATED ON SITE.

MISCELLANEOUS LEGEND DENOTES REFER TO NOTE

DENOTES REFER TO DETAIL AND DRAWING NUMBER.

DENOTES WATIERTIGHT (CSA ENCLOSURE 4)

DENOTES GROUND FAULT INTERRUPTER.

JUNCTION BOX

ABOVE FINISHED FLOOR

DENOTIES EXISTING TO REMAIN

DENOTES EXISTING IN NEW LOCATION. EXTEND EXISTING WIRING & CONDUIT TO SUIT

DENOTIES EXISTING TO BE REMOVED AND RELOCATED

DENOTES EXISTING TO BE DELETED TO ITS ENTIRETY.

DENOTIES NEW EQUIPMENT/DEVICE (TO MATCH EXISTING DEVICE UNLESS OTHERWISE NOTED)

OVERCOUNTER

T-SLOT TYPE RECEPTACLE. 15/20A, 120V

DENOTIES LIGHTING FIXTURE CONNECTED ON NIGHT LIGHT CIRCUIT.

WATER COOLIER

THERMOSTAT AND SPEED CONTROLLER BY DIV. 15 AND WIRED 8Y DIV. 16.

ELECTRICAL CONNECTION TO HAND DRYER. SUPPLIED BY OTHERS AND INSTAILLED AND WIRED BY DIV. 16.

ELECTRICAL CONNECTION FOR FRIDGE

ELECTRICAL CONNECTION FOR STOVE

ELECTRICAL CONNECTION FOR DISHWASHER

ELECTRICAL CONNECTION FOR MICROWAVE

PANEL AND CIRCUIT NUMBER DESIGNATION

TYPICAIL PANEL NOMENCLATURE DESCRIPTION ARE AS FOLLOWS: -L CIRCUIT NUMBER

,-,.,~

LOCATION-FLOOR NUMBER

DESIGNATION (A-Z=NORMAL POWER EXCEPT E,F,W,Z=EMERGENCY POWER)

VOLTAGE (2=208V OR 120/208V, 6=347 /600V)

PANELBOARD - 'pp' DENOTIES POWER PANEL - 'LP' DENOTIES LIGHTING PANEL

DEMOLITION NOTES

1. DIV. 16 TO VISIT SITE TO DETERMINE THE EXACT EXTENT OF RENOVATION.

2. DIV. 16 TO REMOVE EXISTING RECEPTACLE OUTLETS FOR POWER AND COMMUNICATION AND LIGHTING FIXTURES WHICH ARE NOT TO BE REUSED c/w ASSOCIATED WIRING, AND CONDUIT UNLIESS OTHERWISE NOTED.

3. DIVISION 16 TO RELOCATE EXISTING POWER RECEPTACLIE OUTLETS AND LIGHTING LUMINAIRES AS NOTED ON DRAWING PLANS.

onespace

'-' one team. one vision.

NO. DATE REVISIONS

2. 17JAN2018 TENDER 1. NO.

01DEC2017 DATE

PERMIT ISSUED

GABRIELE G. MOBILIO

,",L_ lJ--!<~ill'CS ;e.1-~ I-It. f-'h"OH:.k i' :.;,- or,~'.::-'<Ct. ;:;r·,j 1--llr ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =-A:.:T

1:r'J-·.', '-JC> ,'\--!f- 11·,IH. )f-1) 1,: . )\]\'f-Y s::rn_;r (Jf- ','/l)f-// .'\\I:· IHJl:>oTE CC:''1EFAL A''1C A°'PF:C):lt/A.TE L:::•C.A-Cl'1, ,",P'i','.\\]r,=·;=-\n Al·.n '.'; 7F'I llF 111.<-FS.'IA ~; ,4.1-H'. ::ipr,r:11::Tc:

l'.I C'.:l·.STP.J\,-1:--;'J -Cl =lF <:'.C:CJ!c-.>I~_:"-; TC =i=-c;T CCI/VCl•I PF'?C:T•'.:F At,-.i c;\ff~)f;".,1 TD -HF CJUAF.1~; RI., I I, '·-JC ,:or;-=-[\] ,---,::T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B.ECTFICAL l.EGEN)8, DRAWING LBT AN> GEt£RAL NO I ES

PROJECT NUMBER

17-290 DATE

SCALE

N.T.a PLOfilD DATE

DRAWING NO.

E1

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

1. CODES & STANDARDS 1.1. COMPLETE THE INSTALLATION OF THE WORK IN ACCORDANCE WITH THE LATEST EDITIONS OF THE ONTARIO BUILDING CODE.

ONTARIO ELECTRICAL SAFETY CODE, C.S.A. STANDARDS, U.LC., N.F.P.A., O.H.S.A. AND OTHER CODES, AS REQUIRED. COMPLY WITH ELECTRICAL AND BUILOING CODE BULLETINS IN FORCE AT TIME OF BID SUBMISSION. WHILE NOT IDENTIFIED AND SPECIFIED BY NUMBER IN THIS DIVISION, THEY ARE TO BE CONSIDERED AS FORMING PART OF RELATED STANDARDS. ALSO, ALL ELECTRICAL WORK SHALL COMPLY WITH LANDLORD'S REQUIREMENTS AND BASE BUILDING STANDARDS.

2. EXISTING CONDITIONS 2.1. VISIT THE SITE AND EXAMINE THE EXISTING CONDITIONS AFFECTING THE WORK OF THIS DIVISION. NO CLAIM FOR EXTRA

PAYMENT SHALL BE MADE FOR EXTRA WORK MADE NECESSARY BY CIRCUMSTANCES ENCOUNTERED DUE TO CONDITIONS WHICH WERE VISIBLE UPON, OR REASONABLY INFERABLE FROM AN EXAMINATION OF THE SITE PRIOR TO SUBMISSION OF THE BID. THIS INCLUDES THE EXISTING SERVICES ABOVE CEILING.

2.2. BE AWARE THAT THERE MAY BE ASBESTOS FIBRES PRESENT IN VARIOUS FINISHES OR ON VARIOUS SURFACES, IN CERTAIN AREAS OF THE BUILDING. ARRANGE WORK SO AS NOT TO DISRUPT THESE MATERIALS, OR TAKE FULL AND NECESSARY MEANS TO PROTECT ALL PERSONNEL FROM CONTACT WITH THEM, IN A WAY TO BE APPROVED BY THE LANDLORD. INCLUDE ALL COSTS ASSOCIATED WITH ANY REMEDIAL WORK, IN THE BID.

3. DEFINIIJONS 3.1. WHEREVER THE WORDS "PROVIDE" OR "SUPPLY AND INSTALL", ARE USED, IT SHALL BE UNDERSTOOD TO MEAN "PROVIDE

AND INSTALL, INCLUSIVE OF ALL LABOUR, MATERIALS, INSTALLATION, TESTING, AND CONNECTIONS" FOR THE ITEM TO WHICH IT REFERENCES.

3.2. WHEREVER THE WORDS "EQUAL", "APPROVED", OR " APPROVED EQUAL" ARE USED, IT SHALL BE UNDERSTOOD TO MEAN "EQUAL", "APPROVED", OR "APPROVED EQUAL" IN THE OPINION OF THE CONSULTANT ONLY.

4. MATERIALS AND EQUIPMENT 4.1. ALL MATERIALS AND EQUIPMENT SHALL BE NEW, C.S.A. CERTIFIED AND MANUFACTURED TO THE STANDARDS SPECIFIED. 4.2. WHERE THERE IS NO ALTERNATIVE TO SUPPLYING EQUIPMENT WHICH IS NOT C.S.A. CERTIFIED, OBTAIN SPECIAL APPROVAL

FROM THE ELECTRICAL SAFETY AUTHORITY.

5. PERMITS AND FEES 5.1. THE ELECTRICAL CONTRACTOR SHALL ACT AS THE OWNER'S AGENT IN ACCORDANCE WITH SECTION 2 OF THE O.E.S.C. AND

SHALL IMMEDIATELY UPON AWARD OF CONTRACT, SUBMIT TO THE LOCAL ELECTRICAL INSPECTION DEPARTMENT, THE NECESSARY NUMBER OF DOCUMENTS FOR EXAMINATION, SPECIAL INSPECTION AND APPROVAL, PRIOR TO THE COMMENCEMENT OF THE WORK, AND PAY ALL COSTS AND ASSOCIATED FEES. IF REQUIRED, PREPARE ANY ADDITIONAL DRAWINGS/DOCUMENTS REQUIRED BY THE AUTHORITY.

5.2. THE CONSULTANT WILL PROVIDE UPON REQUEST, AT THE CONTRACTOR'S COST, THE REQUIRED QUANTITY OF DRAWINGS. 5.3. PROVIDE CERTIFICATE(S) OF ACCEPTANCE FROM THE AUTHORITIES INSPECTION DEPARTMENT, UPON COMPLETION OF WORK.

6. INSURANCE 6.1. PROVIDE AND MAINTAIN INSURANCE TO PROTECT THE LANDLORD, TENANT AND TRADES FROM ALL POSSIBLE CLAIMS.

SUBMIT WITH BID FOR AN AMOUNT ACCEPTABLE TO LANDLORD AND TENANT.

7. CONTRACT DOCUMENTS 7.1. THE DRAWINGS FOR THE ELECTRICAL WORK ARE DIAGRAMMATIC PERFORMANCE DRAWINGS ONLY, INTENDED TO CONVEY THE

SCOPE OF WORK AND INDICATE THE GENERAL ARRANGEMENT AND APPROXIMATE SIZE AND LOCATION OF ELECTRICAL EQUIPMENT. THE DRAWINGS DO NOT INTEND TO SHOW ARCHITECTURAL, INTERIOR DESIGN, MECHANICAL, STRUCTURAL OR BASE BUILOING DETAILS. BE RESPONSIBLE FOR A THOROUGH KNOWLEDGE OF SAME BEFORE PROCEEDING WITH THE WORK.

7.2. DO NOT SCALE OR MEASURE DRAWINGS, BUT OBTAIN INFORMATION REGARDING ACCURATE DIMENSIONS FROM THE DIMENSIONS SHOWN ON THE DESIGN CONSULTANT'S/ARCHITECT'S DRAWINGS, OR BY SITE REQUIREMENTS.

7.3. ANY DISCREPANCIES BETWEEN DRAWINGS AND/OR SPECIFICATIONS AND EXISTING CONDITIONS, MUST BE REFERRED TO THE DESIGN CONSULTANT/ARCHITECT BEFORE ANY WORK AFFECTED IS BEGUN.

7 .4. COOPERATE AND COORDINATE WITH OTHER CONTRACTORS IN LAYING OUT OF WORK SO AS NOT TO CONFLICT WITH THE WORK OF OTHER CONTRACTORS. CARRY OUT WORK PROMPTLY AS PER CONSTRUCTION SCHEDULE AND COORDINATE WITH WORK OF OTHER CONTRACTORS.

7 .5. MAKE, AT NO ADDITIONAL COST, ANY CHANGES OR ADDITIONS TO MATERIALS AND EQUIPMENT NECESSARY TO ACCOMMODATE STRUCTURAL CONDITIONS (OFFSETS AROUND BEAMS, COLUMN, ETC.)

8. lliIENI 8.1. IT IS THE INTENT OF THESE DRAWINGS AND SPECIFICATIONS THAT THE CONTRACTOR PROVIDES COMPLETE AND

OPERATIONAL SYSTEMS AS REQUIRED, WHERE DIFFERENCES OCCUR, THE MAXIMUM CONDITION SHALL GOVERN. 8.2. ANY MISCELLANEOUS ITEMS, HARDWARE, DEVICES, WIRING, ETC., NOT SPECIFICALLY DESCRIBED, BUT REQUIRED FOR THE

OPERATION OF THE SYSTEM, MUST BE PROVIDED AND INCLUDED AS PART OF THE BID.

9. SHOP DRAWINGS 9.1. SUBMIT FOUR ( 4) COPIES OF SHOP DRAWINGS OF ALL SPECIFIED EQUIPMENT FOR REVIEW AND RECORDS BEFORE

COMMENCEMENT OF WORK. 9.2. CHANGES MADE TO THE SHOP DRAWINGS BY THE CONSULTANT WILL NOT AFFECT THE CONTRACT PRICE.

10. INSERTS HANGERS AND SI EfYES 10.1. PROVIDE HANGERS, INSERTS, SLEEVES AND SUPPORTS AS REQUIRED. 10.2. INSERTS ARE TO BE OF A LEAD SHIELD TYPE. 10.3. HANGERS MUST NOT BE WELDED TO STRUCTURAL STEEL MEMBERS AND BURNING OF HOLES IN STRUCTURAL STEEL IS

PROHIBITED. 10.4. SLEEVES ARE TO BE OF A TYPE SUITABLE FOR THE APPLICATION AND BE SEALED AND MADE WATERTIGHT. SLEEVES

THROUGH CONCRETE SHALL BE SCHEDULE 40 STEEL PIPES, SIZED FOR FREE PASSAGE OF CONDUIT AND INSTALLED FLUSH WITH UNDERSIZE OF CONCRETE SLAB AND EXTEND 1 ODMM ( 4 ") ABOVE FINISHED FLOOR UNLESS OTHERWISE NOTED.

10.5. DO NOT USE ANY BASE BUILDING SUPPORTS OR EQUIPMENT, INCLUDING CEILING SUPPORT SYSTEM.

11. CUTTING AND PATCHING 11.1 ALL CUTTING AND PATCHING REQUIRED TO THE EXISTING BUILDING STRUCTURE FOR THE WORK SHALL BE INCLUDED

UNDER THIS CONTRACT AND BE ACCEPTABLE TO THE LANDLORD. OBTAIN WRITIEN APPROVAL FROM LANDLORD BEFORE ANY CUTTING IS CARRIED OUT.

11.2 WHERE CONDUITS PASS THROUGH FIRE RATED WALLS OR FLOORS, PROVIDE FIRE STOPPING MATERIAL LISTED WITH, AND BEAR LAIBEL OF CSA AND ULC, AND MAINTAIN SAME FIRE RATING OF BUILDING COMPONENT PENETRATION.

12. LOCATION OF OUTLETS 12.1 REFER TO DESIGN CONSULTANT'S/ARCHITECT'S DRAWINGS FOR EXACT LOCATIONS OF ALL LIGHTING FIXTURES AND WIRING

DEVICES. 12.2 CHANGE LOCATION OF OUTLETS AT NO COST OR CREDIT, PROVIDING DISTANCE DOES NOT EXCEED 3M (10'-0") AND

INFORMATION IS GIVEN PRIOR TO INSTALLATION. 12.3 ALL OUTLETS TO BE MARKED ON JOB SITE FOR APPROVAL BY DESIGN CONSULTANT/ARCHITECT PRIOR TO INSTALLATION.

13. PLYWOOD 13.1 PROVIDE ALL PLYWOOD BACKBOARDS REQUIRED FOR THE WORK OF THIS DIVISION. PLYWOOD BACKBOARDS SHALL BE

21 MM (3/4") THICK, OF HIGHEST QUALITY FIRE RETARDANT FIR. REFER TO DRAWINGS FOR SIZE. PRIME AND PAINT BACKBOARDS WITH FIRE RETARDANT PAINT EQUAL TO CGSB SPEC. #1-GP-151M, OF A COLOUR AS SELECTED BY THE DESIGN CONSULTANT/ARCHITECT.

14. ACCESS DOORS 14.1 WHEREVER ANY BASE BUILDING EQUIPMENT REQUIRES ACCESSIBILITY, MAINTENANCE OR ADJUSTMENT, PROVIDE ACCESS

DOORS APPROVED BY DESIGN CONSULTANT/ARCHITECT AND LANDLORD. ARRANGE FOR ITS INSTALLATION BY THE DIVISION IN WHOSE WORK IT OCCURS.

15. CORE DRILLING 15.1 BEFORE CORE DRILLING FLOOR SLAB OR STRUCTURAL WALLS, X-RAY SLAB OR WALLS AND HAVE THE LOCATIONS

ACCEPTED BY THE LANDLORD IN WRITING. 15.2 ANY EXISTING BUILDING SERVICE DAMAGED BY CORE DRILLING MUST BE REPAIRED IMMEDIATELY AT NO COST TO LANDLORD

OR TENANT. 15.3 FLOOR DRILLING TO BE CARRIED OUT AFTER NORMAL WORKING HOURS AND AT A TIME ACCEPTABLE TO LANDLORD AND

ALLOWANCES FOR THIS WORK SHALL BE INCLUDED IN BID PRICE SUBMITIED.

16. NOISE AND VIBRATION 16.1 ELECTRICAL EQUIPMENT IS TO OPERATE WITHOUT OBJECTIONABLE NOISE OR VIBRATION. IF, IN THE OPINION OF THE

CONSULTANT, THE EQUIPMENT OPERATES WITH EXCESSIVE NOISE OR VIBRATION, THEN THE EQUIPMENT MUST BE REPLACED OR NOISE OR VIBRATION ELIMINATED.

16.2 CONNECTIONS TO NOISE-PRODUCING AND VIBRATING EQUIPMENT MUST BE MADE WITH FLEXIBLE CONDUIT. THIS INCLUDES TRANSFORMERS, DIMMING EQUIPMENT RACKS, AND MOTORS. USE A MINIMUM OF 1 M (3 FT) OF FLEXIBLE CABLE WITH SLACK AT EACH DEVICE.

16.3 VIBRATION ISOLATORS ARE TO BE PROVIDED WHERE INDICATED OR REQUIRED. TRANSFORMERS TO BE ISOLATED FROM THE STRUCTURE, WITH SPRING AND RUBBER ISOLATORS WHEN WALL MOUNTED OR SUSPENDED AND 12MM (1/2") HIGH DENSITY NEOPRENE SANDWICH PADS (TYPE MWP) WHEN FLOOR MOUNTED.

17. TENANT'S EQUIPMENT 17.1 WHERE SPECIFIED, INSTALL ALL EQUIPMENT PROVIDED BY THE TENANT. RECEIVE, STORE AND INSTALL EQUIPMENT AND

ACCEPT FIJLL RESPONSIBILITY FOR ITS CORRECT OPERATION. PROVIDE CONDUIT, WIRE, BOXES, SWITCHES, OUTLETS, DEVICES, FLEX CONNECTIONS, ETC., AS REQUIRED.

18. WORK IN NEW AND RENOVATED AREAS 18.1 WHEN DELETING AND/OR MAKING SAFE EXISTING ELECTRICAL WORK, ENSURE THAT IT INCLUDES REMOVAL OF ALL

DISCONNECTED WIRING BACK TO THE ASSOCIATED PANEL BOARD OR DISTRIBUTION EQUIPMENT. 18.2 DISCONNECT AND REMOVE EXISTING LUMINAIRES, DEVICES, OUTLETS, ETC., WHICH ARE NOT TO BE REUSED. SUCH ITEMS

SHALL BE CARTONED AND TURNED OVER TO THE LANDLORD AT A PLACE DESIGNATED BY THE LANDLORD. CUT BACK AND CAP UNUSED RACEWAY AND OUTLETS AND REMOVE UNUSED WIRING BACK TO PANELBOARD IN AN APPROVED MANNER. REMOVE ALL REDUNDANT COMMUNICATIONS CABLES BACK TO HUB ROOMS AND/OR TELEPHONE RISER ROOMS.

18.3 ENSURE THAT ALL EXISTING EQUIPMENT WHICH ARE TO BE REUSED AND/OR RELOCATED IS THOROUGHLY INSPECTED AND REFURBISHED TO ENSURE CORRECT OPERATION WHEN PUT BACK INTO SERVICE AND MEETS THE LOCAL ELECTRICAL SAFETY AUTHORITY'S APPROVAL. OUTLET BOXES AND WIRING AND/OR CONDUITS WHICH ARE CORRODED OR DAMAGED ARE TO BE REPLACED.

18.4 ALL EXISTING ELECTRICAL EQUIPMENT WHICH IS NO LONGER REQUIRED SHALL BE REMOVED AND DISPOSED OF, OFF SITE.

18.5 WHERE EXISTING OUTLET BOXES ARE REMOVED FROM EXISTING UNDER FLOOR DUCTS, PLUG AND CAP EXISTING HOLES FLUSH WITH FLOOR USING APPROVED FITIINGS. REMOVE ALL REDUNDANT WIRE AND CABLE BACK TO SERVICE.

18.6 BE RESPONSIBLE AND PAY FOR ANY DAMAGE TO THE BASE BUILDING INCURRED BY WORK OF THIS DIVISION, OR REPAIR TO THE SATISFACTION OF THE CONSULTANT.

18.7 CARRY OUT THE WORK WITH A MINIMUM OF NISE, DUST AND DISTURBANCE. 18.8 PROVIDE TOOLS AND CLEAN UP EQUIPMENT. OBTAIN THE LANDLORD'S PERMISSION FOR THE USE OF ECTRICAL

ELEVATOR, PLUMBING OR DRAINAGE OUTLETS. 18.9 PROVIDE DAILY CLEAN UP AND PROPER DISPOSAL OF DEBRIS GENERATED BY DAILY OPERATIONS. ON

COMPLETION OF THE WORK, ALL TOOLS, SURPLUS MATERIALS AND WASTE MATERIALS SHALL BE REMOVED AND THE PREMISES LEFT IN A CLEAN AND PERFECT CONDITION.

18.10 REMOVE AND REROUTE EXISTING CONDUITS WHICH ARE TO REMAIN IN "FINISHED" AREAS WHICH ARE TO BE EXPOSED.

18.11 CONDUITS WHICH ARE TO BE CUT BACK ARE TO TERMINATE IN A JUNCTION BOX. 18.12 CLEAN LUMINAIRE REFLECTORS AND LENSES, LAMPS, AND OTHER SURFACES THAT HAVE BEEN EXPOSED TO

CONSTRUCTION DUST AND DIRT. CLEAN THE INSIDES AND OUTSIDES OF PANELBOARDS, SPLITTERS AND OTHER ELECTRICAL EQUIPMENT, AND COMPLETELY REMOVE ALL DEBRIS AND TOOLS FROM THE PROJECT.

19.INTERRUPTION OF SERVICES 19.1 INTERRUPTION OF ELECTRICAL SERVICE TO ANY PART OF THE BUILOING SHALL OCCUR ONLY BY

PER-ARRANGEMENT WITH AND AT TIMES SUITABLE TO THE LANDLORD. 19.2 INTERRUPTIONS SHALL ONLY OCCUR DURING PREMIUM TIME PERIODS; ALL ALLOWANCES FOR THIS SHALL BE

INCLUDED IN THE PRICE SUBMITIED.

20JDENTIFlCAJION 20.1 PROVIDE LAMACOID NAMEPLATES ON ALL PANELS; DISCONNECT SWITCHES, SPLITIERS, ETC., TO MATCH BASE

BUILDING. NAMEPLATES SHALL BE MECHANICALLY ATIACHED TO EQUIPMENT BY MEANS OF RIVETS OR SELF TAPPING SCREWS.

20.2 PROVIDE TYPEWRITTEN DIRECTORIES FOR NEW AND EXISTING PANELS. CONFIRM EXISTING IDENTIFICATION AND CORRECT WHERE NECESSARY.

20.3 CLEARLY MARK ALL EXPOSED CONDUIT, PULLBOXES, JUNCTION BOXES, ETC., TO INDICATE THE NATURE OF THE SERVICE TO MATCH BASE BUILDING STANDARDS.

21.VAI UATION OF CHANGES 21.1 PROVIDE COMPLETE BREAKDOWN OF MATERIAL, LABOUR, OVERHEAD, PROFIT, ETC., WHEN SUBMITTING QUOTATIONS

FOR CHANGE NOTICES ON THIS PROJECT. 21.2 THE HOURLY LABOUR RATE SHALL BE INCLUSIVE OF ALL CHARGES FOR SUPERVISION, VARIABLE LABOUR

FACTORS, HAND TOOLS, PAYROLL BURDENS, HEIGHT FACTORS, WARRANTIES, STORAGE, RENTALS, ADDITIONAL BONDING, PARKING, CLEAN-UP, AS-BUILT DRAWINGS, HOISTING, FREIGHT AND DELIVERY, BUT EXCLUSIVE OF OVERHEAD AND PROFIT.

21.3 THE LABOUR HOURS SHALL BE BASED ON THE LATEST ISSUE OF THE NATIONAL ELECTRICAL CONTRACTORS ASSOCIATION (NECA) LABOUR UNITS, COLUMN ONE NORMAL FOR THE DURATION OF THIS CONTRACT.

21.4 THE MATERIAL PRICES SHALL BE BASED ON THE CURRENT NATIONAL PRICES SYSTEM (NPS) CATALOGUE LESS APPLICABLE TRADE DISCOUNTS.

2?-fNGINEERS FlNAI INSPECTION 22.1 FINAL INSPECTION IS IMPERATIVE. PRIOR TO CLOSING OF CEILINGS, THIS CONTRACTOR SHALL CONTACT E-LUMEN

INTERNATIONAL INC. (905) 265-8900 AND THE LANDLORD'S REPRESENTATIVE TO PERFORM A FINAL INSPECTION WHEN CEILING TILES HAVE BEEN INSTALLED IT WILL BE NECESSARY FOR THE CONTRACTOR TO REMOVE PORTIONS FOR INSPECTION.

23.COMPLETION OF CONTRACT 23.1 ALL EQUIPMENT MUST BE CLEANED AND TESTED BEFORE FINAL ACCEPTANCE BY CONSULTANT. 23.2 FROM THE DATE OF ISSUANCE OF A "CERTIFICATE OF SUBSTANTIAL PERFORMANCE", PROVIDE A WRITIEN

GUARANTEE FOR ONE YEAR COVERING ALL EQUIPMENT, MATERIALS AND WORKMANSHIP, OTHER THAN LAMPS. INSERT IN OPERATIONS AND MAINTENANCE MANUAL.

23.3 DEFECTS AND DEFICIENCIES WHICH ORIGINATE OR BECOME EVIDENT DURING THE WARRANTY PERIOD MUST BE REPAIRED OR REPLACED, AT NO COST.

23.4 REPLACE, AT NO COST, ALL INCANDESCENT LAMPS BURNED-OUT DURING A THIRTY (30) DAY PERIOD AND ALL BURNED-OUT FLUORESCENT AND HID LAMPS FOR A PERIOD OF NINETY (90) DAYS AFTER DATE OF ISSUANCE OF CERTIFICATE OF "SUBSTANTIAL PERFORMANCE" FOR THE CONTRACT FOR THE WORK.

23.5 IF, DURING THE WARRANTY PERIOD, TRANSFORMERS, BALLASTS OR OTHER NOISE AND VIBRATION PRODUCING EQUIPMENT ARE CONSIDERED BY THE CONSULTANT TO EXCEED ACCEPTABLE STANDARDS, THEN THESE MUST BE REPLACED WITHOUT DELAY OR ADDITIONAL COST TO THE TENANT. ALL WORK RELATING TO THE REPLACEMENT OF DEFECTIVE ITEMS, MUST BE CARRIED OUT AFTER NORMAL WORKING HOURS AND AT A TIME WHICH IS ACCEPTABLE TO THE TENANT.

24.AS BUILT DRAWINGS 24.1 AT THE COMPLETION OF WORK AND BEFORE FINAL ACCEPTANCE, PROVIDE AS-BUILT DRAWINGS OF THE

INSTALLATION IN AUTOCAD RELEASE 2000 FORMAT. AN ELECTRONIC COPY (AUTOCAD FORMAT) OF ALL DRAWINGS WILL BE PROVIDED TO THE ELECTRICAL CONTRACTOR BY THE CONSULTANT AT NO COST. THE DRAWINGS WILL REFLECT THE TENDER AND/OR CONSTRUCTION SET OF DRAWINGS. SHOULD THE CONTRACTOR REQUIRE ADDITIONAL ELECTRONIC COPIES DURING CONSTRUCTION, A COST OF $100.00 PER DRAWING (PLUS GST) WILL BE CHARGED BY THE CONSULTANT.

24.2 INCORPORATE ALL CHANGES AND DEVIATIONS FROM TENDER DRAWINGS, UTILIZING NORMAL RECOGNIZED DRAFTING PROCEDURES THAT MATCH THE ORIGINAL DRAFTING METHODOLOGY.

24.3 ALL MAIN BRANCH CONDUIT RUNS, JUNCTION BOX LOCATIONS, CONDUIT RUNS FOR ALL FLOOR OUTLETS, ETC., MUST BE REFLECTED ON THE DRAWINGS.

24.4 REMOVE THE ELECTRICAL ENGINEER'S STAMP AND COMPANY NAME FROM ALL DRAWINGS. 24.5 CLEARLY INDICATE THE WORDS "AS-BUILT" IN THE TITLE BLOCK COLUMN OF THE DRAWINGS AS WELL AS THE

ELECTRICAL CONTRACTOR'S NAME AND ADDRESS. 24.6 SUBMIT A PRINT TO CONSULTANT FOR REVIEW. WHEN FOUND ACCEPTABLE BY THE CONSULTANT, SUBMIT THREE

(3) SETS OF PRINTS TOGETHER WITH THE CAD-DISK FOR PRESENTATION TO THE LANDLORD AND TENANT.

25.0PERATION AND MAINTENANCE MANUALS 25.1 PROVIDE 2 (TWO) SETS OF OPERATION AND MAINTENANCE MANUALS SUBMITIED IN HARD COVER 3-RING

BINDERS. INCLUDE THE FOLLOWING INFORMATION IN THE OPERATIONS AND MAINTENANCE MANUALS: 1. NAMES AND ADDRESS OF LOCAL SUPPLIERS FOR THE ITEMS INCLUDED. 2. TECHNICAL DATA, PRODUCT DATA, SUPPLEMENTED BY BULLETINS, COMPONENT ILLUSTRATIONS, EXPLODED VIEWS, TECHNICAL DESCRIPTIONS OF ITEMS, AND PARTS LISTS. ADVERTISING OR SALES LITERATURE IS NOT ACCEPTABLE. 3. THE CONSULTANT'S REVIEWED SHOP DRAWINGS. 4. CERTIFICATE(S) OF ACCEPTANCE FROM THE AUTHORITIES INSPECTION DEPARTMENT. 5. VERIFICATION REPORTS AND CERTIFICATE(S) FOR ANY NEW FIRE ALARM COMPONENTS OR TIE-INS AND ANY BASE BUILOING TIE-INS FOR MISCELLANEOUS SYSTEMS (I.E. SECURITY, LIGHTING CONTROL, DIGITAL METERING). 6. LOAD BALANCE REPORT. 7. WRITIEN GUARANTEE.

25.2 REVIEW INFORMATION PROVIDED IN THE MAINTENANCE INSTRUCTIONS AND MANUALS WITH THE TENANT'S OPERATING PERSONNEL AND LANDLORD'S OPERATING PERSONNEL WHERE BASE BUILDING SYSTEMS ARE REVISED, TO ENSURE A COMPLETE UNDERSTANDING OF THE ELECTRICAL EQUIPMENT AND SYSTEMS AND THEIR OPERATION.

26.DEMOLITION 26.1 VISIT THE SITE, EXAMINE THE EXISTING CONDITIONS AND BECOME FAMILIAR WITH THE EXTENT OF THE

NECESSARY REMOVAL, RELOCATION, RECONNECTING, AND REROUTING OF ELECTRICAL EQUIPMENT AND WIRING AS NECESSARY FOR THE COMPLETION OF THE PROJECT.

26.2 REVIEW AND CONFIRM WITH THE ARCHITECT/DESIGNER'S DRAWINGS FOR THE COMPLETE EXTENT OF DEMOLITION AND ALTERATION.

26.3 MAKE SAFE AND DISCONNECT ALL POWER AND SYSTEMS, AS AND WHEN, AND TO THE EXTENT REQUIRED TO FACILITATE WITH THE DEMOLITION.

26.4 ENSURE THAT ALL ELECTRICAL, LIFE SAFETY SERVICES, AND SERVICES FOR EXISTING EQUIPMENT, IN AREAS OUTSIDE THE AREAS OF THIS WORK, THAT ARE REQUIRED TO REMAIN IN SERVICE, SHALL DO SO.

26.5 RELOCATE ANY ELECTRICAL FEEDERS OR EQUIPMENT THAT ARE REQUIRED TO REMAIN IN SERVICE, THAT ARE SECURED TO EXISTING WALLS, FLOORS OR CEILINGS TO BE DEMOLISHED OR THAT ARE BURIED AND REQUIRED TO BE EXCAVATED FOR NEW WORK.

26.6 REMOVE AND REPLACE ANY ELECTRICAL EQUIPMENT ON WALLS OR CEILINGS THAT WILL BE DEMOLISHED AND REBUILT.

26. 7 WHEN DELETING AND/OR MAKING SAFE EXISTING ELECTRICAL WORK, ENSURE THAT IT INCLUDES ALL WIRING BACK TO THE ASSOCIATED PANELBOARDS OR CONTROL PANEL.

26.8 DISCONNECT AND REMOVE EXISTING LIGHT FIXTURES, DEVICES, OUTLETS, E.T.C. WHICH ARE NOT TO BE REUSED. SUCH ITEMS SHALL BE CARTONED AND TURN OVER TO THE OWNER AT A PLACE DESIGNATED BY THE OWNER. CUT BACK AND CAP UNUSED RACEWAY AND OUTLETS AND REMOVED UNUSED WIRING BACK TO PANELBOARD IN APPROVED MANNER.

26.9 INCLUDE IN DEMOLITION WORK FOR REMOVAL OF ALL COMMUNICATION DEVICES, OUTLETS, AND CABLES, E.T.C., WHICH ARE NOT TO BE REUSED. REMOVE ALL UNNECESSARY CABLES AND EQUIPMENT IN HUB ROOMS AND/OR TELEPHONE ROOMS WITH EXTREME CARE TO AVOID ANY ACCIDENTAL SHUTDOWN TO EXISTING SERVICES SERVING OTHER PARTS OF THE BUILDING.

26.10 PROVIDE BLANK COVERPLATE WHERE OUTLETS ARE REMOVED FROM EXISTING WALLS TO REMAIN. 26.11 ALL EXISTING ELECTRICAL EQUIPMENT WHICH IS NO LONGER REQUIRED SHALL BE REMOVED AND DISPOSED OF,

OFF SITE. 26.12 BE RESPONSIBLE AND PAY FOR ANY DAMAGE TO THE BASE BUILDING INCURRED BY WORK OF THIS DIVISION, OR

REPAIR TO THE SATISFACTION OF THE CONSULTANT. 26.13 CARRY OUT THE WORK WITH MINIMUM OF NOISE, DUST AND DISTURBANCE.

MATERIAi s AND METHODS

1. CONDUITS AND CONDUIT FlffiNGS 1.1 PROVIDE ALL CONDUIT UP TO AND INCLUDING 10JMM (4") SIZE, AS EMT THIN WALL WITH STEEL SET SCREW TYPE FITTINGS AND

WEATHERPROOF CONNECTORS WITH "o" RINGS IN SPRINKLERED BUILDINGS. BUSHINGS AND CONNECTORS TO BE C/W INSULATED THROAT.

1.2 PROVIDE FLEXIBLE METAL CONDUIT FOR CONNECTION TO MOTORS. 1.3 INSTALL CONDUITS TO CONSERVE HEADROOM, PARALLEL AND PERPENDICULAR TD BUILDING LINES. DO NOT CADDIE CLIP CONDUITS TO

CEILING HANGERS. 1.4 ALL EMPTY CONDUITS SHALL BE COMPLETE WITH NYLON FISH WIRE. 1.5 RUN TWO (2) 27MM (1 ") SPARE CONDUITS UP TO CEILING SPACE FOR EACH RECESSED PANELBOARD. TERMINATE THESE CONDUITS IN A

155MMX155MMX103MM (6"X6"X4") COVERED JUNCTION BOX IN CEILING SPACE. 1.6 ALL COMMUNICATIONS CONDUIT SHALL BE REAMED AND INSTALLED COMPLETE WITH INSULATED BUSHINGS AT EACH END. THE

CONTRACTOR SHALL INFORM THE CONSULTANT OF ANY COMMUNICATIONS CONDUIT LENGTHS IN EXCESS OF 70M (230 FT.) PRIOR TO INSTALLATION.

1.7 ALL COMMUNICATIONS CONDUIT SHALL BE REAMED AND INSTALLED COMPLETE WITH INSULATED BUSHINGS AT EACH END. THE CONTRACTOR SHALL INFORM THE CONSULTANT OF ANY COMMUNICATIONS CONDUIT LENGTHS IN EXCESS OF 70M (230 FT.) PRIOR TO INSTALLATION.

2. SPLITTERS JUNCTION BOXES AND PULL BOXES 2.1 SPLITIERS SHALL HAVE SHEET STEEL ENCLOSURE, WITH WELDED CORNERS AND FORMED HINGED COVER SUITABLE FOR LOCKING IN

CLOSED POSITION. CONNECTION BARS ARE TO MATCH REQUIRED SIZE AND NUMBER OF INCOMING AND OUTGOING CONDUCTORS AS INDICATED.

2.2 JUNCTION BOXES AND PULLBOXES SHALL BE SUITABLE FOR SURFACE MOUNTING AND BE OF WELDED STEEL CONSTRUCTION WITH SCREW-ON FLAT COVERS.

2.3 FOR FLUSH-MOUNTED PULL AND JUNCTION BOXES, PROVIDE COVERS WITH 27MM (1 'J MINIMUM EXTENSION ALL AROUND. 2.4 INSTALL JUNCTION AND PULL BOXES IN INCONSPICUOUS BUT ACCESSIBLE LOCATIONS. 2.5 A MINIMUM OF ONE PULL BOX SHALL BE INSTALLED FOR EVERY 100 FT. (30M) OF CONDUIT. (NOTE: EACH 90 DEG. BEND SHALL

EQUATE TO A 30 FT. (9M) LENGTH OF CONDUIT). 2.6 NO MORE THAN TWO (2) - 90 DEG. BENDS SHALL BE INSTALLED BETWEEN ANY TWO ADJACENT PULL BOXES.

3. OUTLET BOXES 3.1 OUTLET BOXES SHALL BE ELECTRO-GALVANIZED STEEL, SIZED AS REQUIRED BY CODE. 3.2 PROVIDE EACH LIGHT SWITCH, RECEPTACLE, COMMUNICATION AND OTHER OUTLET WITH AN OUTLET BOX. INSTALL PLUMB AND TRUE.

PROVIDE 78MM (3") DEEP 1004 BOXES FOR DIMMING SWITCHES. 3.J ADAPT ALL OUTLET BOXES TO THEIR RESPECTIVE LOCATIONS AND SUPPORT INDEPENDENTLY OF THE CONDUIT. DO NOT CADDLE CLIP

TO CEILING HANGERS. 3.4 PROVIDE BLANK COVERPLATES FOR BOXES WITHOUT WIRING DEVICES. 3.5 DO NOT INSTALL OUTLET BOXES BACK TO BACK IN PARTITIONS. STAGGER TO PREVENT SOUND TRANSFER. 3.6 TWO DR MORE OUTLET BOXES THAT OCCUR AT THE SAME LOCATION SHALL BE GANGED TOGETHER IN THE SAME COVERPLATE UNLESS

OTHERWISE NOTED.

4. GROUNDING 4.1 GROUND ALL EQUIPMENT IN ACCORDANCE WITH LATEST EDITION OF THE ELECTRICAL SAFETY CODE. PROVIDE SEPARATE GREEN

INSULATED GROUND CONDUCTOR IN EVERY CONDUIT TO ALL DEVICES, LUMINAIRES AND FEEDERS (PANELBOARDS, SPLITTERS, DISCONNECT SWITCHES, ETC.).

5. WIRE AND CABLE 5.1 ALL WIRE AND CABLE SHALL BE COPPER, MINIMUM 12 GAUGE, NO. 12 AND NO. 10 SOLID, NO. 8 AND LARGER STRANDED, WITH RW90

INSULATION, 600VOLT RATING. 5.2 BX/112 MAY BE USED IN CEILING SPACE FROM CEILING DISTRIBUTION BOX DOWN TO RECEPTACLES IN PARTITIONS. BX RUNS IN CEILING

SPACE NOT TO EXCEED 3048MM(10'-0") IN LENGTH. DO NOT RUN BX CABLES INTO PANELBOARDS. 5.3 SIZE ALL WIRE FOR MAXIMUM 2:1 VOLTAGE DROP. 5.4 ALL HOME RUNS TO BE IN CONDUIT.

6. LOCAL SWITCHES 6.1 PROVIDE SPECIFICATION GRADE LOCAL 20A. 120 VOLT SWITCHES, DECORA TYPE WHITE WITH WHITE MATCHING COVERPLATES:

- P&S 1/DECORA SERIES C/W SCREWLESS FACEPLATES

6.2 REFER TO LEGEND FOR OTHER TYPES.

7. RECEPTACLES 7.1 PROVIDE SPECIFICATION GRADE 15A. 120 VOLT, "U" GROUND RECEPTACLES, DUPLEX TYPE WHITE WITH WHITE MATCHING COVERPLATES:

- P&S ;j!DECORA SERIES - P&S DECORA COVERPLATE

7.2 REFER TO LEGEND FOR OTHER TYPES. 7.3 RECEPTACLES ON SEPARATE CIRCUITS ARE TO HAVE CIRCUIT NUMBER IDENTIFIED ON THE WALL PLATE AND FIJRTHER IDENTIFIED WITH

THE EXACT LOCATION LISTED IN THE PANEL DIRECTORY.

8. LIGHTING CONTROL DIMMING SYSTEM 8.1 SYSTEM SHALL CONSIST OF FACTORY PRE-ASSEMBLED DIMMING AND SWITCHING PANELS, CENTRALIZED PRESET LIGHTING CONTROL(S),

LOW VOLTAGE WALLSTATIONS AND/OR CONTROL INTERFACES, AND SOLID-STATE HIGH FREQUENCY FLUORESCENT DIMMING BALLAST (WHERE APPLICABLE). THE MANUFACTURER SHALL BE LUTRON ELECTRONICS CO., INC. THE LIGHTING CONTROL SYSTEM SHALL PROVIDE SHADE CONTROL CAPABILITY (WHERE APPLICABLE). ADDITIONAL ITEMS MAY ALSO BE REQUIRED AND ARE DESCRIBED HEREIN AND/OR SHOWN ON THE DRAWINGS.

9. MECHANICAL TRADE WIRING 9.1 UNLESS OTHERWISE NOTED, ALL STARTERS AND CONTROL WIRING TO BE PROVIDED BY DIVISION 15. DIVISION 16 TO RECEIVE, INSTALL

STARTERS AND PROVIDE ALL POWER WIRING AND REQUIRED ISOLATING DISCONNECT SWITCHES. 9.2 CONFIRM ELECTRICAL REQUIREMENTS AND EXACT LOCATIONS OF ALL MECHANICAL EQUIPMENT WITH DIVISION 15 PRIOR TO INSTALLATION.

10. LUMINAIRES 10.1 PROVIDE ALL LUMINAIRES AS SHOWN ON THE DRAWINGS AND AS SPECIFIED IN THE LUMINAIRE SCHEDULE. 10.2 ALL LUMINAIRES SHALL BE COMPLETE WITH NEW LAMPS, BALLASTS, ACCESSORIES AND MOUNTING APPURTENANCES. 10.3 ALL LUMINAIRES TO BE CSA APPROVED. 10.4 AIM AND ADJUST ALL LUMINAIRES IN PRESENCE OF CONSULTANT. 10.5 ALL NEW DOWNLIGHT AND SURFACE MOUNTED LUMINAIRES INSTALLED IN OR ON THE BASE BUILDING CEILINGS SHALL BE INDEPENDENTLY

SUPPORTED FROM BUILDING STRUCTURE WITH TENSO CHAINS UNLESS OTHERWISE NOTED. 10.6 COOPERATE WITH ALL OTHER TRADES FOR THE PROPER INSTALLATION OF ALL LUMINAIRES.

11. SWITCHBOARDS AND PANEL BOARDS 11.1 PROVIDE ALL THE NECESSARY BREAKERS C/W ACCESSORIES IN THE EXISTING PANEL TO SERVE ALL THE FEEDERS MODIFY OR

ADD/EXTEND ENCLOSURES IF REQUIRED CONTRACTOR TO REVIEW SITE CONDITION AND INCLUDE ALL NECESSARY ACCESSORIES TO RELOCATE THE EXISTING PANEL IF REQUIRED.

12. MEGGERING AND BALANCING 12.1 MEGGER ALL POWER CIRCUIT FEEDERS. IF GROUND RESISTANCE ON ANY CIRCUIT IS LESS THAN THAT REQUIRED BY CSA OR OTHER

GOVERNING REGULATIONS, SUCH CIRCUITS ARE TO BE CONSIDERED DEFECTIVE AND MUST BE REPLACED. 12.2 MEASURE PHASE CURRENT TO PANELBOARDS WITH NORMAL LOADS OPERATING AT TIME OF ACCEPTANCE. ADJUST BRANCH CIRCUIT

CONNECTIONS AS REQUIRED TO OBTAIN BEST BALANCE OF CURRENT BETWEEN PHASES AND SUBMIT A REPORT FOR INSERTION INTO MANUALS.

13. SERVICE EQUIPMENT 13.1 ALL NEW PANELBOARDS, DISCONNECT SWITCHES, METERS, ETC., TO BE SAME MANUFACTURE, RATING AND TYPE AS BASE BUILDING

EQUIPMENT UNLESS OTHERWISE NOTED. MOLDED CASE CIRCUIT BREAKERS TO BE BOLT-ON AND SAME MANUFACTURER, RATING AND TYPE AS BASE BUILDING BREAKERS. IF UNABLE TO MATCH BASE BUILDING EQUIPMENT, ONE OF THE FOLLOWING MANUFACTURER'S EQUIPMENT MUST BE PROVIDED: SCHNEIDER, CUTLER-HAMMER AND SIEMENS.

1 J.2 DRY TYPE TRANSFORMERS SHALL BE OF THE SAME MANUFACTURER AS THE BASE BUILDING BUT WITH A DESIGN K FACTOR OF 1 J AND WITH ELECTROSTATICALLY SHIELOED WINDINGS. PROVIDE DOUBLE LUGS ON TRANSFORMER NEUTRALS FOR CONNECTION OF CABLES. IF UNABLE TO MATCH BASE BUILDING TRANSFORMER, ONE OF THE FOLLOWING MANUFACTURER'S TRANSFORMERS MUST BE PROVIDED: SCHNEIDER DELTA ACMEHAMMOND MAGNETEK/POLYGON

13.J CEILING MOUNT TRANSFORMERS UP TO 45 KVA WITH SUSPENSION RODS AND SPRING ISOLATORS, TRANSFORMERS 75 KVA AND LARGER TO BE FLOOR MOUNTED ON KORFUND ISOLATION PADS UNLESS OTHERWISE NOTED.

14. MEGGFRING AND BAI ANGING 14.1 MEGGER ALL POWER CIRCUIT FEEDERS. IF GROUND RESISTANCE ON ANY CIRCUIT IS LESS THAN THAT REQUIRED BY

CSA OR OTHER GOVERNING REGULATIONS, SUCH CIRCUITS ARE TO BE CONSIDERED DEFECTIVE AND MUST BE REPLACED. 14.2 MEASURE PHASE CURRENT TO PANELBOARDS WITH NORMAL LOADS OPERATING AT TIME OF ACCEPTANCE. ADJUST

BRANCH CIRCUIT CONNECTIONS AS REQUIRED TO OBTAIN BEST BALANCE OF CURRENT BETWEEN PHASES AND SUBMIT A REPORT FOR INSERTION INTO MANUALS.

15. SERVICE EQUIPMENT 15. 1 ALL NEW PANELBOARDS, DISCONNECT SWITCHES, METERS, ETC., TO BE SAME MANUFACTURE, RATING AND TYPE AS BASE

BUILDING EQUIPMENT UNLESS OTHERWISE NOTED. MOLDED CASE CIRCUIT BREAKERS TO BE BOLT-ON AND SAME MANUFACTURER, RATING AND TYPE AS BASE BUILDING BREAKERS. IF UNABLE TO MATCH BASE BUILOING EQUIPMENT, ONE OF THE FOLLOWING MANUFACTURER'S EQUIPMENT MUST BE PROVIDED: SCHNEIDER, CUTLER-HAMMER AND SIEMENS.

15.2 DRY TYPE TRANSFORMERS SHALL BE OF THE SAME MANUFACTURER AS THE BASE BUILDING BUT WITH A DESIGN K FACTOR OF 13 AND WITH ELECTROSTATICALLY SHIELDED WINDINGS. PROVIDE DOUBLE LUGS ON TRANSFORMER NEUTRALS FOR CONNECTION OF CABLES. IF UNABLE TO MATCH BASE BUILOING TRANSFORMER, ONE OF THE FOLLOWING MANUFACTURER'S TRANSFORMERS MUST BE PROVIDED: SCHNEIDER DEL A

15.3 CEILING MOUNT TRANSFORMERS UP TO 45 KVA WITH SUSPENSION RODS AND SPRING ISOLATORS, TRANSFORMERS 75 KVA AND LARGER TO BE FLOOR MOUNTED ON KORFUND ISOLATION PADS UNLESS OTHERWISE NOTED.

16. I !ff SAFETY SYSTEM 16.1 PROVIDE COST FOR ADDITION, RELOCATION, CLEAN, VERIFICATION AND TESTING OF THE LIFE SAFETY SYSTEM

COMPONENTS. ALL TIE-IN TO BASE BUILDING LIFE SAFETY SYSTEM TO REMAIN. ALL NEW LIFE SAFETY DEVICES TO MATCH BASE BUILDING STANDARDS. PROVIDE VERIFICATION CERTIFICATE TO OWNER.

16.2 EXISTING FIRE ALARM PULL STATIONS, SMOKE DETECTORS AND BELL TO REMAIN OR TO BE RELOCATED AS INDICATED ON DRAWINGS.

16.3 PROVIDE NEW FIRE ALARM EVAC SPEAKERS, SMOKE DETECTORS, PULL STATION AS NOTED ON PLANS AND C/W CONDUIT & WIRING. NEW F .A. DEVICES ARE TO BE CONNECTED TO THE EXISTING FIRE ALARM SYSTEM.

16.4 DIV. 16 TO CARRY ADDITIONAL EXIT SIGNS AS DIRECTED BY BUILDING INSPECTOR

onespace

'-' one team.

NO. DATE

2. 17JAN2018

1. 01 DEC2017

NO. DATE

one vision.

REVISIONS

TENDER

PERMIT

ISSUED

GABRIELE G. MOBILIO

,",L_ lJ--!<~ill'CS ;e.1-~ I-It. f-'h"OH:.k i' :.;,- or,~'.::-'<Ct. ;:;r·,j 1--llr ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =-A:.:T

1:r'J-·.', '-JC> ,'\--!f- 11·,IH. )f-1) 1,: . )\]\'f-Y s::rn_;r (Jf- ','/l)f-// .'\\I:· IHJl:>oTE CC:''1EFAL A''1C A°'PF:C):lt/A.TE L:::•C.'\-Cl'1, ,",P'i','.\\]r,=·;=-\n Al·.n '.'; 7F'I llF 111.;,,-FS.'IA ~; ,4.1-H'. ::ipr,r:11::Tc:

,",I C'.:l·,STP.Jc-1:--;,1 -n =lF ;,:;c,:,1c-.,1~.:: TC 'F'.'.T CCI/VCl•I PF'?C:T•'.:F At\-.i c;\ff~)f;".,1 TD -HF CH\TAF.1~; RI., 11, · .. 1c ,:or;,=-1 .. 1 ,---,:;T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B.ECTFICAL SI CllCATlONS

PROJECT NUMBER

17-290

SCALE

N.T.a

DATE

PLOfilD DATE

DRAWING NO.

E2

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

1:l

I 11

0, \

\

I I"--. I

~ o,

00XT I I -r

V

I

I I

. ''~ ·T--+----llf~ 3, V

=

I I

-'

I

-\ ""

11 LA1 I;

-

I '-.

0

n

u

LA1

Q SMAI MEETING ROOM n c7-

,...--_ .:;=>./ ,=-

l II ~ "' --< ,I

/ ol

oA/Jo OFf iCE. __ \, )-' JI•: I -e-t=:P· • -

' '

o,

C{DPY AR 'A CIII:::

MEETING ROOt-. I ' L,[, I

~ 8)1

'.'.'.:I l\ Af-:::IA.

XT

z )> z 0 re,

.,

o - ~

Cc ~

LJ

o,

o,

0,

Kl .CHEN :]}I]

0

IP HE•I

QC

n

z )> z 0 re,

--

0

/

,.0 A

~ I

/ I ~/

I

) _., n

:r: ;o

./

I "-

LQD,

LA1

STORAGE CiITJ

-

~/

I ~1 ~/

1:/11

-

NOTES: 1. ALL 20"x60" RECESSED LIGHTING FIXTURES SHOWN ON PLAN ARE TYPE 'L.A1' UNLESS OTHERWISE NOTED.

2. PROVIDE NEW LIGHTING FIXTURE AS NOTED ON DRAWINGS AND CONNECT TO EXISTING LIGHTING CIRCUITS. DIV. 16 TO RE-USE EXISTING BASE BUILDING'S NORMAL AND EMERGENCY LIGHTING CIRCUITS WITHIN TENANT SPACE. ENSURE EXISTING NORMAL LIGHTING CIRCUITS ARE NOT CONTROLLING ADJACENT TENANTS LIGHTING SYSTEM. REWIRE AND PROVIDE PROPER CIRCUITS TO SUIT. DIV. 16 TO CONNECT ALL LIGHTING FIXTURES ACCORDINGLY.

0 PROVIDE NEW PICTOGRAM RUNNING MAN AND CONNECT TO EXISTING EXIT SIGN AC CIRCUIT TO SUIT.

4. PROVIDE NEW OCCUPANCY SENSORS, LIGHTING DIMMERS/SWITCHES AS NOTED AND CONNECT TO NEW LIGHTING LUMINAIRE SHOWN TO SUIT.

5. DIV. 16 TO ENSURE ALL LIGHTING LUMINAIRES SHALL BE CONTROLLED BY EXISTING BASE BUILDING CONTROL SYSTEM. PROVIDE REQUIRED MODIFICATIONS TO SUIT.

'.z LA1 H--tffL--- H o Hlt--t~-iu h-..i-~ ,

FNANCE •IEPAF!Th cNT ~

-

LA1

re,

I

I

!

LA1 I/

v FIN, NCE a=~ICE

---"'.J I o,

' e---~ ·--+I :':] z

)> z

-a-- - - - ..

-15

I A

'4B CEPAn I'-" OE]

IJ\1

l!A1 T

)

'--,---crl\11) -

I I

I

l

-

• LA1

Ifill

LA1

-(;) A

HR OFFICE ~

HR OFFICE

,ii'icl I

/

)

"" / I/ LA1 / ~~ LA1 ·, ~ "' I/ _ ~ --~~------------+--------~ ~ ~~~~ /~""'~~~~~~=~~~~=* 1/~"---.~>----------(u

~--------) ,~~,I -I

J I

onespace

'-' one team. one vision.

NO. DATE REVISIONS

2. 17JAN2O18 TENDER 1. O1DEC2O17 PERMIT NO, DATE ISSUED

~<t;,'i'ESSllJN~f..

<J~~ ~ ...Q!LlZfillli. % w '" ~ F, SANTIA g

1,~~~ ~ ""' Ct OF ll"

~¥,.G \NEER ING ,.,, ,J "c E" ,- "~ ' !:: o'r '1,

h " "' . ~ . ; w 0 0 O z

"'TAI'-' GABRIELE G.

MOBILIO

l",L_ lJ--!<~ilf·CS ,C.k~ I-It. f-'h"OH:.k i' :.;,- or,~'.::-'-'0/;t. ;'.!J .• j 1-IU ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =iA:.:T

1:i,J-·.', \JC> .<s-cr 11·.IH . .>rlJ 1,: . .''-1\'h s::rncr !Jr 1!/t.>ru .'\\I:· IHJl:>oTE c::·>1EFAL ,:,,·,c A=iPF:C>:ltJA.TE L:::•c.'\-Cl'1, ,",P'i','.,,\]r,=·;=-\n Al·.n '.'; 7F'I llF 111.'\-FS.'IA ~; ,4.1-H'. =ipr,r:11::Tc:

,",I C'.:l·,STP.Jc-1:-;,1 -n =lF ;,:;c,:,1c-.,1~.:: TC 'F'.'.T CCIJVCl•I PF'?C:T•'.:F Al-.) c;\ff~)f;".,1 TD -HF C:,UAF.1~; R1..11, ·-.1c ,:or;-=-1-.1 1-T::T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B..ECTFICAL LJQHTNQ PLAN

PROJECT NUMBER

17-290 DATE

SCALE

1/4'-f-<1' PLOfilD DATE

DRAWING NO.

E3

,,,,

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

)

1:l

I; I; f ·;,,,

27RB

-'

I n

-" ' "

NOTES:

0 4'x8'x3/4" TELEPHONE PLYWOOD BACKBOARD. PROVIDE 2"C C/W PULLSTRING AT THIS LOCATION AND BACK TO BASE BUILDING TELEPHONE ROOM BACKBOARD LOCATION.

PROVIDE NEW FIRE ALARM EVAC SPEAKER TO MATCH EXISTING AND CONNECT TO EXISTING FIRE ALARM FLOOR EVAC SIGNAL CIRCUIT TO SUIT.

~ AT HIGH LOCATION.

4. REFER TO INTERIOR DESGN DRAWINGS FOR EXACT LOCATION AND HEIGHTS OF ALL RECEPTACLE OUTLETS.

~ CHASE (CORE DRILL) EXISTING FLOOR AND PROVIDE 3-1 "C FOR POWER AND COMMUNICATION/HDMI TO SUIT.

' '

- \ l1@27Rl' 77 \ 27RB-77 l1@27RB-77

I rltr, 2-7F B 78 - r,tr:;:2'ZR l' 'ZB ,-1r:;:2 RB 8 ., ., ., .,

I

LJ

,

Q ~/ 0 27RB-67 0

27RB-i

I -

\

27R8-143

27RB-45 - ""R+" e" o""F"'FIC"'E~-

'

R+E DEPT. DD

~'~ t~:7 1YPICA!g ./ Cl

:r--

111 _b2=7=RBJ~-46~9~ ~ = 2~7~R;[jl-80 llf 1-'11'. sz-· <l1l v

O'Q ~ R,a.8-~7~0 =, RECEPTION

~

,~~,I

-

-

'I

,

I/ 0 <

0 ~ -~J ~J ~,I\

MEETI~~fOM • 0 ,,.~

0 J' 4 r',i 5 '\ ~/

)> )> )> z z z 0 0 0

(IJ fTl fTl

0 fTl

0 0 27RB143

©1 c§2 -,~cr'j1'lffL.:~ _!!]-- 2 .... ~7=R=iB-;=4->9-~"""9'l=. 'lt'\~ p~: ·~1 27RB-5;~ /

27 'B-4J 7RB-57 • '1 ,;rl+--#ca-s-',;}l~;!. -!,J • • -. ~,.-l§jfli, ,_cn:r-+-/-a __ 21 is-45' • i _i.;:..:.i 3 /I FINANC~ :~ ~

27RB-45 R+E OFFICE _ ..... _ ""'-="""'"9

-

27RB-~

:;o Rs>

Ile Cl

I

il' :'l 2 RB-69

,' .-- -

--

-\

Q

R4l1_~b~€Jl'"'•,,:_,,1a_@•~===~~_:9,1-----, • 27RB-47 27RB-4 """1 27 RB-Sl

0 (_ ..,,1:, - 1 3/4"C (POWER) /

; ;

\ -- ') It'~' Aw It'~' 2-l"C (COMMr HDMll ,_~-+-/-a

~j' \ ®27RB-57 27 RJd ,...1-+-~ 27RB-66' .§ -

27RB-70-I

-

-

Z:,@27R~-53

([J) 27RB 70

/1,

0 ., ., 0 z z )> )> z z 0 0

L':::::ci=='::lYJ.~@2i'R l=a3-:il::ci::::::::i::::::::'.gJ(j1)2'7R8 e------------ -;-------11 I

Ile"' A A ' ~B -59 q ilCE

~~ ·il,_~_B_-_7~1_LJ __ ~--+=-~LJ __ ~ '~·7_R_B-_~-,.-<,n 2,~- 45 t=:::f" @REL

~

27R8-~ / I\ o __

\ ~

83 -

N - ~

27R8-?o iRB -='59 (!])27Rll-70

I

I

27RB-~ 1 TS .

27R8-48 TS@i

CONTROL PANEL

i

COPY AREA ::J:IIJ

#

KITCHEN I u c

~ I 27R8-68 •

STORAGE ,:,11

1/1, / --

0 0 ., ., z z )> )> z z 0 0 -= Cl ,-,- 2-7RB-7a - Cl - - ,2'7RB· '75-

:r w\ll!27R8=73 :r 75. · r2'i'R8 'i';J-:;o :;o

0 0 1~11 ~ HRDEPAR rr~

l

@REL

J ~~ -~

7RB-65 0

-

)> z 0 fTl

I

0

0

1U1 27 ~

RNANCE OFFICE ~

0

0 HR OFFCE ~

- \\\ ( 1 [ 1YPIClAL

~ y---=1--1 H OFFICE

onespace

'-' one team.

NO. DATE

2. 17JAN2018 1. 01 DEC2017 NO. DATE

one vision.

REVISIONS

TENDER PERMIT ISSUED

GABRIELE G. MOBILIO

l",L_ lJ--!<~ilf·CS ,C.f-'~ I-It. f-'h"Ol-t.k i' :.;,- or,~'.::-'<Ct. ;'.!J.,j 1--lt.l ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =iA:.:T

1:i,,--_,, ".JC> .'\--!f- 11-.1H . .>f-lJ 1,: . -''-1\'r'r s::rn_;r 1Jr 1:.:t.>ru .'\\I:· 11,Dl:>oTE CC:''1EFAL A''1C A=iPF:C>:ltJA.TE L:::•C.'\-Cl'1. ,",P'i'.'.\'.Jr,=·;=-\n Al·.n '.'; 7F'I llF 111.<-FS.'IA ~; ,4.1-H'. =ipr,r:11::Tc:

,",I C'.:l·,STP.Jc-1:-;,1 -n =lF ;,:;c,:,1c-.,1~.:: TC 'F'.'.T CCIJVCl•I PF'?C:T•'.:F At\-.i c;\ff~)f;".,1 TD -HF C:,UAF.1~; RI., 11, · .. 1c ,:or;,=-f".j ,---,:;T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B.ECTFICAL POWER AND SYSTEMS PLAN

PROJECT NUMBER

17-290

SCALE

1/4' - 1'-G"

DATE

PLOfilD DATE

DRAWING NO.

E4

J K L M

2

4

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

1:l -'

I ,

- - - -" ' " " "

-b 0 ~

0 0 0 0 0

€1 0 0 0 0 0 ! 0 0 0 0 Q 0

u

€)

1#71 €:': 0 0 0 0 I I

f<,j 0 0 0 0 D 0

0 0 0 0 0 D --- Q . /

'0 0 0

\ \ /

7 <ID([]) 7 ([])<ID ([]) $ lb '1 rhd I

®'- ((]) 0 0) 0 0

-$;/) .f!J)J 0 0 () @ER 0 I I - -- ---0 "

'>; ,, I

0 0 0 0 /) $ Q A ([)

I H~UM 1

"I I I I

0 [ ~----/ A.db 0 & G)ER

-

0 0

0 = ·-9-'.w l)D .

O,!,<p 'v I I , . (0 0 ~

[] €::: -

A I

~ / \ //-- §c

~ DHW l I I

r-\ 0 I

! < 0 [> 0 ,--..__

I'\ ~ (( J@ l8l w

'"' 7

I

I I I

I I

' " . -- -J I ) ~ I I

n

'

I I I I

~

€:': -I I

i -1.

( -

I I > I I / · .

/ / ~// / /

([]) / /

/ //

I I

rr.l t I I

l€l

I I

18l I ([])

I '

·, ·· ..

I . I I ·----- €1 - €1

€1 €1 QJ QJ ~ ~

I I I I

~ f

/ "

NOTES: 1. ALL EXISTING LUMINAIRES AND EXIT SIGNS TO BE DELETED UNLESS OTHERWISE NOTED.

2. ALL EXISTING POWER AND COMMUNICATION OUTLETS/DEVICES C/W WIRING TO BE DELETED UNLESS OTHERWISE NOTED.

0 ALL EXISTING FIRE ALARM EVAC SPEAKERS TO BE RELOCATED. REFER TO E4 FOR LOCATION AS NOTED.

0 MECHANICAL DEVICES TO BE DELETED C/W ALL ASSOCIATED WIRING AND CONDUIT AND CIRCUmNG UP TO PANEL.

-' "

~ @i ,-

I I I I 1,.

I ,<,I "" - " €:': = ~

,

I I I I

$

" QJJ ..,,. -----.

I I I I

' I D([])

I I

IIMhl',

I I I I I I

~" - --

I I I . I

I

I J)ll.

0 I I I I I I @ER

-

..,,. " ~" '

' ' '

I I I I I I - -

C,

I~ .I ~" ~

I I I I I 17 " D -" ( "' I/ u I/ ""

onespace

'-' one team.

NO. DATE

2. 17JAN2018 1. 01 DEC2017 NO. DATE

one vision.

REVISIONS

TENDER PERMIT ISSUED

GABRIELE G. MOBILIO

,",L_ lJ--!<~ill'CS ;e.1-~ I-It. f-'h"OH:.k i' :_;,- or,~'.::-'<Ct. ;:;r·_j 1--llr ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =-A:.:T

1:r'J-·.', '-JC> ,'\--!f- 11·,IH. )f-1) 1,: . )\]\'f-Y s::rn_;r (Jf- ','/l)f-// _'\\l:­IHJl:>oTE CC:''1EFAL A''1C A°'PF:C):lt/A.TE L:::•C.A-Cl'1, ,",P'i','.\\]r,=-·;=-\n Al·.n '.'; 7F'I llF 111.<-FS.'IA ~; ,4.1-H'. ::ipr,r:11::Tc:

l'.I C'.:l·.STP.J\,-I:--;'J -Cl =lF ;,;"'.l,(")fc-.>I~.:--; Tl, =i=-:c.T CCI/VCl•I PF'?C:T•'.:F At\-.i c;\ff~)f;".,1 TD -HF CH\TAF.I~; RI., I1, · .. 1c ,:or;,=-I\] ,---,::T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B..ECTFICAL DEMOUTION PLAN

PROJECT NUMBER

17-290

SCALE

1/4'-f-<1'

DATE

PLOfilD DATE

DRAWING NO.

ES

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

LOAD BRKR CCl cc., BRKR LOAD LOAD DESCRIPTION LOAD DESCRIPTION (W) SIZE NO. PH NO. SIZE (W)

l\lS 111\I:_; 15A 1 A 2 15A l/lS 11\J:._;

I '.( I :;i 11·-1 ;; 15A 3 B 4 15A I /1:'0 11\1 '.'.

[ l':,Tll.I::; 15A 5 C 6 15A c;Is-II·I:,

l/l':_; 111\1:_; 15A 7 A 8 15A l>'.I'_:_: 11·-J:._;

,;ISTII.IS 15A 9 B 10 15A ,".ICll•I>

E'<ISTll'.JG 15A 11 C 12 15A E/IS-IIIS

,"ISTIIIS 15A 13 A 14 15A r->:Is-IIIs

c->:1~:111·1:_; 15A 15 B 16 15A l/lS 11\J:._;

LXISI 11'.J'..:: 15A 17 C 18 15A L/12 11\1::.;

['l",TIII::: 15A 19 A 20 15A [/l:~;-II\I::;

l/1'_:_; 111\1:_; 15A 21 B 22 15A l/1'_:_: 11·-J:._;

I.\ I STI l·-1 ::. 15A 23 C 24 15A 1>:1c;-11\1:;

E<l':,mi::; 15A 25 A 26 15A E\IS-11\J::;

E)(ISTII.IS 15A 27 B 28 15A E>:Is-I1Is

F/ISrn·-1::-; 15A 29 C 30 15A F'/1~-II\I::;

lXISI 11'.JG 15A 31 A 32 15A l/lS ll·f:.;

l'<IC:::Tll·-1:'; 15A 33 B 34 15A 1/1~-II\J~;

l>'.I':_; 111\1:_; 15A 35 C 36 15A l/1'.:: 11·-J:._;

I .:(I'. 111·-J'.', 15A 37 A 38 15A I /l'C II\I :;

E\I .mi::; 15A 39 B 40 15A E>ls-11'1:,

E>'.ISTII\IG 15A 41 C 42 15A E".IS-IIIS

RECEPTACLES - OFFICE 15A 43 A 44 v:: l/1'.:: 11·-.1::.; RECEPTACLES - OFFICE 15A 45 B 46

RECEPTACLES - OFFICE 15A 47 C 48 15A SECURITY CONTROL PANEL

RECEPTACLES - OFFICE 15A 49 A 50 20A* RECEPTACLES - TELECOM

RECEPTACLES - PRINTER 20A* 51 B 52 15A FRIDGE

RECEPTACLES - OFFICE 15A 53 C 54 20A* KITCHEN COUNTER

RECEPTACLES - OFFICE 15A 55 A 56 15A DISHWASHER

RECEPTACLES 15A 57 B 58 20A* KITCHEN COUNTER

RECEPTACLES - OFFICE 15A 59 C 60 20A* KITCHEN COUNTER

RECEPTACLES - TV 15A 61 A 62 /2 DHWT PRINTER 20A* 63 B 64 p

RECEPTACLES - OFFICE 15A 65 C 66 15A EF-1, EF-2, EF-3

RECEPTACLES - OFFICE 15A 67 A 68 15A RECEPTACLES - TV

RECEPTACLES - OFFICE 15A 69 B 70 15A RECEPTACLES

RECEPTACLES - OFFICE 15A 71 C 72 15A EF-4

RECEPTACLES - OFFICE 15A 73 A 74 20A* RECEPTACLES - TELECOM

RECEPTACLES - OFFICE 15A 75 B 76 20A* RECEPTACLES - TELECOM

RECEPTACLES 15A 77 C 78 15A RECEPTACLES - OFFICE

RECEPTACLES 15A 79 A BO 15A RECEPTACLES

RECEPTACLES - OFFICE 15A 81 B B2 15A SPARE

RECEPTACLES - OFFICE 15A B3 C 84 15A SPARE

VOLTS: 120/ZOBV TYPE: 0FLUSH

PHASE: 3ii! LOAD(kW): XXX ~SURFACE

PANEL: PANEL 'RP-27RB' WIRE: 4W LOAD(AMPS): XXX ~ SPRINKLERPROOF

(EXISTING) MAINS: 225A LOCATION: STORAGE RM 0MAIN BREAKER

I.C.(KA): FED FROM: D SPD

NOTES: 1. PROVIDE DOUBLE SIZED NEUTRAL BUS. 2. THE MAINS SHALL BE COPPER AND SUITABLE FOR BOLT-ON BREAKERS. 3. COMPLETE CIRCUIT DIRECTORY WITH lYPEWRITTEN LEGEND SHOWING LOCATION OF EACH CIRCUIT. 4. CIRCUIT NUMBER FOR GROUPING PURPOSE ONLY. 5. "*N - DENOTES NEW BREAKER TO MATCH EXISTING. 6. ......... - DENOTES LOCK-lYPE BREAKER. 7. PANEL IS EXISTING C/W BREAKERS AS NOTED.

onespace

'-' one team.

NO. DATE

2. 17JAN201 B

1. 01 DEC2017

NO. DATE

one vision.

REVISIONS

TENDER

PERMIT

ISSUED

GABRIELE G. MOBILIO

,",L_ lJ--!<~ill'CS ;e.1-~ I-It. f-'h"OH:.k i' :.;,- or,~'.::-'<Ct. ;:;r·,j 1--llr ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =-A:.:T

1:r'J-·.', '-JC> ,'\--!f- 11·,IH. )f-1) 1,: . )\]\'f-Y s::rn_;r (Jf- ','/l)f-// .'\\I:· IHJl:>oTE CC:''1EFAL A''1C A°'PF:C):lt/A.TE L:::•C.A-Cl'1, ,",P'i','.\\]r,=·;=-\n Al·.n '.'; 7F'I llF 111.<-FS.'IA ~; ,4.1-H'. ::ipr,r:11::Tc:

l'.I C'.:l·.STP.J\,-1:--;'J -Cl =lF <:'.C:CJ!c-.>I~_:"-; TC =i=-c;T CCI/VCl•I PF'?C:T•'.:F At,-.i c;\ff~)f;".,1 TD -HF CJUAF.1~; RI., I I, '·-JC ,:or;-=-[\] ,---,::T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B.ECTFICAL PANEL SCI-EDll.E

PROJECT NUMBER

17-290 DATE

SCALE

N.T.a PLOfilD DATE

DRAWING NO.

E6

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

D

D

TWO GANG BACK BOX

TO PANEL r 3/4" HOME RUN

p-

- -· ~

0 0

D D D

0 0

D D D

LTWO GANG COVERPLA JE

LEX ~ DEDICATED CIRCUIT DUP RECEPTACLE FOR COMPUTER (GREY)

SYMBOL ON PLAN:

®

1· C TO CEILING SPACE BENDED 90 DEGREE

I--+-+-- MOUNTING PLATES AND JACKS SUPPLIED AND INSTALLED BY COMMUNICATIONS CONTRACTOR.

--....----SPARE

SINGLE GANG COVERPLATE

WALL MOUNTED OUTLET DETAIL E7 SCALE: N.T.S.

5

INJERNAL DIVIDING STRIP----,

INTERNAL DIVIDING STRIP---,

1 "C AND WIRE FOR POWER

NOTES:

SECTION

2-1 "C C/W PULLSTRING EXTENDED UP TO CEILING SPACE

1. FLOOR MOUNTED (SURFACE) BOX. LOW PROFILE SERVICE FITTINGS. WELLMARK. FM4-11 SERIES C/W NUMBER OF POWER, COMMUNICATION AND AV OUTLETS AS REQUIRED/SHOWN.

OUTLET FOR HDMI

SYMBOL ON PLAN: -~ 2. DIV. 16 TO PROVIDE PROPER FLOOR MOUNUMENT C/W APPROPRIATE MOUNTING PLATE

AND DEVICES TO SUIT.

FLOOR MOUNTED OUTLET E7 SCALE: N.T.S.

-2

'--.:~

6

E7

SINGLE GANG - r 3/4" HOME RUN -1" C TO

BACK BOX TO PANEL CEILING SPACE BENDED 90 DEGREE

p- ~,....

.... - ..... .. .. - ... 0 - DATA

D D cY' ,-

SPARE 0 - ,-

JACKS

D D o/

L SINGLE GANG LSINGLE GANG COVERPLATE COVERPLATE

- DEDICATED CIRCUIT DUPLEX RECEPTACLE FOR COMPUTER (GREY)

SYMBOL ON PLAN:

@v

WALL MOUNTED OUTLET DETAIL SCALE: N.T.S.

SINGLE GANG - r 3/ 4" HOME RUN -1" C TO

BACK BOX TO PANEL CEILING SPACE BENDED 90 DEGREE

p- ~,....

. ~ ~

0 0 DATA D 0 SPARE ' - JACKS

r, 0 VOICE

0 - SPARE D JACKS

L SINGLE GANG L SINGLE GANG COVERPLATE COVERPLATE

- DEDICATED CIRCUIT DUPLEX RECEPTACLE FOR COMPUTER (GREY)

SYMBOL ON PLAN:

@'1

WALL MOUNTED OUTLET DETAIL SCALE: N.T.S.

/ 3 , NOT USED '\.. E7 SCALE: N.T.S.

1 101

NOTES:

f-2·c 101 1/T SERVER RM.

0 EXISTING PLYWOOD BACKBOARD @ EXISTING BASE BUILIDING MAIN TELEPHONE ROOM.

(&> 2"C C/W PULLWIRE. PROVIDE REQUIRED PULLBOX.

0 PROVIDE 8'x4'x3/4" FIRE RATED PLYWOOD BACKBOARD @ 1/T SERVER ROOM. PROVIDE REQUIRED PLYWOOD BACKBOARD C/W 1/6 AWG GROUND WIRE AND CONNECT TO EXISTING BASE BUILDING GROUNDING SYSTEM. COORDINATE FOR EXACT INSTALLATION OF BACKBOARD AND PROVIDE BONDING CONNECTIONS FROM IT EQUIPMENT TO BASE BUILDING GROUND SYSTEM.

7 COMMUNICATION DETAIL E7 SCALE: N.T.S.

3/4" HOME RUNl -3/4" C UP TO CEILING TO PANEL SPACE & BENDED 90"

p- 0--

- . - -BARRIER

0 D D FOR TV

GI -,,, TWO GANG _/ 0 BACK BOX

D D

LTWO GANG COVERPLATE

SYMBOL ON PLAN:

(jl)q:J

NOTES: ,. THIS DETAIL IS TO BE USED FOR ALL WALL MOUNJED RECEPTACLE, COMMUNICATION, TV AND A/V OUTLETS AS PER INJERIOR DESIGNER DRAWINGS. EACH BOX SHALL BE EQUIPPED WITH PROPER CONDUIT SYSTIEM AND MOUNTED AT HIGH LOCATION.

2. NUMBER BESIDES INDICATES QUANTITY OF CLUSTER OUTLETS.

-/ 4 '\ WALL MOUNTED T.V. OUTLET DETAIL

'--.:~ SCALE: N .T .S.

NOTES: 1 ALL CONDUITS TO BE PROVIDED BY DIV. 1 6.

2 ALL SECURITY CABLING TO BE PROVIDED BY SECURITY CONTRACTOR INSTALLATION AND TERMINATION OF ALL SECURITY DEVICES BY SECURITY CONTRACTOR.

3. DIV. 16 TO COORDINATE WITH SECURITY CONTRACTOR FOR A PROPER AND EXACT TERMINATION OF CONDUITS PRIOR TO ROUGHING-IN.

TO SECURITY CONTROL PANEL

@-LOCATED AT IT ROOM

15mmC "'--LINE OF CEILING

= [TI']

15mmC.

~ ~ rn

100x100x100 [ill ELEClRIC J.B FOR CARD

STRIKE READER

DOOR FRAME

i-DOOR FRAME

SECURE SIDE Of INGRESS SIDE Of DOOR DOOR

8 SECURITY CARD READER DETAIL E7 SCALE: N.T.S.

onespace

'-' one team.

NO.

2. 1. NO.

DATE

17JAN2018 01DEC2017 DATE

one vision.

REVISIONS

TENDER PERMIT

ISSUED

GABRIELE G. MOBILIO

,",L_ lJ--!<~ill'CS ;e.1-~ I-It. f-'h"OH:.k i' :.;,- or,~'.::-'<Ct. ;:;r·,j 1--llr ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =-A:.:T

1:r'J-·.', '-JC> ,'\--!f- 11·,IH. )f-1) 1,: . )\]\'f-Y s::rn_;r (Jf- ','/l)f-// .'\\I:· IHJl:>oTE CC:''1EFAL A''1C A°'PF:C):lt/A.TE L:::•C.'\-Cl'1, ,",P'i''\\]r,=·;=-\n Al·.n '.'; 7F'I llF 111.;,,-FS.'IA ~; ,4.1-H'. ::ipr,r:11::Tc:

,",I C'.:l·,STP.Jc-1:--;,1 -n =lF ;,,:;c,:,1c-.,1~.:: TC 'F'.'.T CCI/VCl•I PF'?C:T•'.:F At\-.i c;\ff~)f;".,1 TD -HF CH\TAF.1~; RI., 11, · .. 1c ,:or;,=-1 .. 1 ,---,:;T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

B.ECTFICAL DETALS

PROJECT NUMBER

17-290

SCALE

N.T.a

DATE

PLOfilD DATE

DRAWING NO.

E7

onespace unlimited inc.

architecture + interior design3700 STEELES AVE WEST. SUITE 305. VAUGHAN, ONTARIO L4L 8K8TEL: (416) 848-1245 FAX: (416) 848-1246 WWW.ONESPACEUNLIMITED.COM

N° 057663

CONSULTING ENGINEERS

LIGHTING - ELECTRICAL

LUMINAIRE SCHEDULE

TYPE LAMP llESCBlfIIQN MANUFA!:;IUBEB ALTERNATE 32.5W LED, 2400LUMENS,

6" DIA RECESSED IN CEILING DOWNLIGHT C/W 40' PRESCOLITE EUROFACE A 80CRI, 3000'K LIED BEAM ANGLE AND 0-1 OV DIMMABLE DRIVER TO OPERATE AT 347V. CAT.# LC6ML-DMl-347-CP-6LCML-24L-35K-8-WH CAT.#SRM-25

40W LIED, 3000LU MENS, 6" DIA RECESSED IN CEILING ADJUSTABLE LED DOWNLIGHT C/W 30' BEAM ANGLE AND 0-10V DIMMABLE EUROFACE 8 80CRI, 3500'K PRESCOLITE DRIVER TO OPERATE AT 347V. CAT.# LC6ML-DMl-347-CP-6LCML-30L-35K-8-WH CAT.#SRM-38

40W LIED, 3000LUMENS, 8" DIA RECESSED IN CEILING LED DOWNLIGHT C/W 40" BEAM ANGLE AND 0-1 OV DIMMABLE DRIVER TO EUROFACE C 80CRI, 3500'K PRESCOLITE OPERATE AT 347V. CAT.# LC8ML-DMl-347-CP-8LCML-30L-35K-8-WH CAT.#BRM-38

LA1 34W, 4000LUMENS, DIRECT /INDIRECT 2o"xso· RECESSED PARALLIEL LENSED AIR HANDLING LED TROFFER IN T-BAR CEILING C/W PEERLESS 3500"K, 80CRI 0-10V DIMMABLE DRIVER TO OPERATE AT 347V. CAT.# SDLCL3AACF SERIES

LA2 SOW, 5000LUMENS, 20"x60" RECESSED PARALLIEL LENSED AIR HANDLING LED TROFFER IN T-BAR CEILING C/W 0-10V DIMMABLIE DRIVER PEERLESS 3500'K, 80CRI TO OPERATE AT 347V. CAT.# SDLCL3AACF SERIES

ULTRA BRIGHT LIED EXIT SIGN, GREEN PICTOGRAM EXIT SIGN, EDGELIT, C860 APPROVED, DIRECTIONAL FACES AS PER DRAWINGS BEGHELLI EMERGILITE XT ARROW(S) INDICATE DIRECTION OF EXIT FLOOR PLAN, UNIVERSAL MOUNTING & UNIVERSAL VOLTAGES. TO OPERATE AT 120/347V AC. SINGLE, CAT. #GD-RM-L SERIES (EGRESS)TRAVEL DOUBLE & UNIVERSAL FACES. VOLTAGES TO MATCH EXISTING LUMACELL

EMERGENCY BATIERY UNIT GREEN PICTOGRAM EXIT COMBO, EDGELIT, TO OPERATE AT 120V/347V AC. VOLTAGES TO MATCH BEGHELLI

C/W SINGLE/DOUBLE LED 7W AIMLITE XC1/XC2 EXISTING. CAT. #GD-RM-12-72-SERIES

MR16 HEADS AND ULTRA UNIVERSAL MOUNTING LUMACELL BRIGHT LED EXIT SIGN

onespace

'-' one team. one vision.

NO. DATE REVISIONS

2. 17JAN2018 TENDER 1. 01DEC2017 PERMIT NO. DATE ISSUED

~<t::,'i'ESSllJN~f..

<J~ ~ ~ ...Q!LlZfillli. % w '" ~ F. SANTIA g

1,~~~ ~ ""' Ct OF ll"

~¥,.G \NEER ING ,.,, ,J \>-c E",. "~ ' !:: o'r '"I,

h " "' . ~ . ; w 0 0 O z

'!,TAI<'

GABRIELE G. MOBILIO

,",L_ lJ--!<~ill'CS ;e.1-~ I-It. f-'h"OH:.k i' :.;,- or,~'.::-'<Ct. ;:;r·,j 1--llr ARC: ,,JT -c 3E :::::=ip,:,c;rrn II. 1!il-C_:: OR 'J =-A:.:T

1:r'J-·.', '-JC> ,'\--!f- 11·,IH. )f-1) 1,: . )\]\'f-Y s::rn_;r (Jf- ','/l)f-// .'\\I:· IHJl:>oTE CC:''1EFAL A''1C A°'PF:C):lt/A.TE L:::•C.A-Cl'1, ,",P'i','.\\]r,=·;=-\n Al·.n '.'; 7F'I llF 111.<-FS.'IA ~; ,4.1-H'. ::ipr,r:11::Tc:

l'.I C'.:l·.STP.J\,-I:--;'J -Cl =lF <:'.C:CJ!c-.>I~_:"-; TC =i=-c;T CCI/VCl•I PF'?C:T•'.:F Al,) c;\JF~)f;".,1 TD -HF C:,UAF.I~; RI., I1, · .. 1c ,:or;,~ I\] ,---,::T ;'.T T I THI

CLIENT

SURFEY PLAY CENTRE

ACCT m Bay street, TOI onto, Ontar1o

DRAWING

LUMINAFIE SCI--EDULE

PROJECT NUMBER

17-290

SCALE

N.T.a

DATE

PLOfilD DATE

DRAWING NO.

ES

,,,,

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 7 of 15

4. Evaluation Criteria Proposals will be evaluated based upon the following criteria: 1. Vendor Suitability

1.1. Corporate Experience: 1.1.1. Demonstrated experience in providing appropriate furniture for clinical programs 1.1.2. Organizational reputation in its industry and particular areas of expertise which may be of value beyond the normal engagement

1.2 Understanding of the Requirements 1.3 Implementation Plan and Approach 1.4 The quality of the proposal submitted in meeting the scope requirements

2. Total Pricing 3. Completion Date Please note that:

Submissions that do not meet the evaluation criteria will be disqualified.

In order to be fair to all applicants, late submissions and phone calls or emails to discuss the applications status will not be accepted.

Only short listed applicants will be contacted.

All short listed applicants will be notified of the status of their application.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 8 of 15

5. Proposal Contents and Format The following format and sequence should be followed in order to provide consistency in Applicants’ responses

and ensure each Proposal receives full consideration. Please complete the following bid form- Section 5.1:

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 9 of 15

5.1 Tender Form:

NAME OF BIDDER ___________________________________________

ADDRESS ___________________________________________

___________________________________________

TELEPHONE ___________________________________________

BID PRICE

I/We the undersigned, having carefully examined the Bid Documents, having visited and investigated the Place

of the Work, and examined all conditions, circumstances and limitations affecting the Work, offer to enter into a

Contract with the Owner to perform the Work required by the Bid Documents for the stipulated price of:

For a total price of: ________________________________________________________________

___________________________________ DOLLARS ($_________________)

The price offered excludes Harmonized Sales Tax (HST) but includes all other eligible taxes. The price offered

includes all stipulated cash allowances.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 10 of 15

COST ANALYSIS / SUB CONTRACTORS:

The following is a breakdown of sub-contractors (if applicable), upon whose proposals this tender is based.

Item: Subcontractor:

Price:

Demolition

Drywall

Paint

Carpet, flooring

Plumbing

Electrical

Miscellaneous: supervision, permits, clean up, hoist

Other

Other

Other

Other

Other

OVERHEAD & PROFIT

We submit the following; for the purposes of additions or deletions from the contract, the contractor shall limit

their Overhead and Profit to:

__________________________________________ Percent (__________________________%) of the costs

Overhead & Profit percentage to include for all costs incurred by the General Contractor including but not

limited to administration, site supervision, foreman, laborer etc.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 11 of 15

ADDENDA

I/We the undersigned have received, carefully examined and incorporated Addenda No. ___ to No. ___

inclusive.

DECLARATIONS

I/We the undersigned declare that:

1. I/We agree to perform the Work in compliance with the Contract documents and reach Substantial

Performance of the Work within ____ weeks after award of the Contract.

2. No person, firm or corporation other than the undersigned has any interest in this bid or in the

proposed Contract for which this bid is made.

3. This bid is open for acceptance by the Owner for a period of thirty (30) days from the date of

submission.

DATE _________________________

_________________________

SIGNATURE WITNESS

Name and Title _________________________

END OF SECTION

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 12 of 15

6. Terms and Conditions

6.1 Delivery of Proposal

Edwin Cui Financial Analyst

Surrey Place Centre 2 Surrey Place, Toronto, ON, M5S 2C2

Please also submit one (1) electronic copy to: edwin.cui@surreyplace.on.ca in PDF format by February 2, 2018 at 1:00pm EST. 6.2 Proposal Time Limit Each bidding company shall commit that the proposal is valid and accurate for 30 days from the closing date February 2, 2018 . 6.3 Selection Process Surrey Place Centre (SPC) reserves the right to accept or reject any proposals. SPC will review all applications. The award will be based on a review of the proposals against all evaluation criteria and will not necessarily be awarded based on the lowest price offered. Each firm will be provided with fair access to information, as requested by e-mail or in writing (see Key Dates). Additional written materials, to ascertain the qualification of applicant may be requested. 6.4 Inquiries Respondent should e-mail (please do not telephone) all questions to: edwin.cui@surreyplace.on.ca. 6.5 Liability Insurance All firms are requested to warrant that the firm does not currently have any outstanding liability claims that may impact on the future health of the firm. Additionally, the firm must maintain sufficient liability insurance relevant for a client of our size. The liability coverage must be confirmed. 6.6 Conflict of Interest Applicants responding Applicants responding to this RFP may not have any personal or business interest that would present an actual, potential or apparent conflict of interest with the performance of the contract to be awarded.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 13 of 15

6.7 Distribution of the Invitation for Proposals This invitation has been released: 1. By notice to potential applicants identified by Surrey Place Centre using the Government of Ontario`s Vendor of Records system 2. By publication on Surrey Place Centre’s website and MERX.COM. 6.8 Surrey Place Centre is not Committed to Applicant’s Expenses The application process will not necessarily result in a commitment to sign a contract with the Applicant. SPC shall not be liable for any expenses incurred by any Applicant, including the expenses associated with the cost of preparing the Application. 6.9 Expense claim and reimbursement rules SPC will not pay or reimburse an auditor for any hospitality, incidental or food expenses, including but not limited to expenses in respect of meals, snacks, beverages, gratuities, laundry or dry cleaning, valet services, dependent care, home management and personal telephone calls. Reimbursement for allowable expenses can be claimed and reimbursed only when the contract specifically provides for it. 6.10 Successful Applicant The successful applicant will be required to enter into a Service Agreement with Surrey Place Centre. Please be advised that successful Applicants will be required to:

Provide the goods in the defined period of time;

Provide invoices to Surrey Place Centre on account of their services, accordingly;

Provide Surrey Place Centre with an HST number for their business; and

Report their income and directly remit the payment of all taxes or payments assessed or levied against or in respect of their business, including income tax, Canada Pension Plan, and all other premiums or levies required by law to the appropriate Government Agency.

The successful applicants will be required to adhere to all Surrey Place Centre’s Human Resources Policies.

6.11 External Factors Surrey Place Centre reserves the right to withdraw this RFP or terminate the resulting contract within the terms of the contract without penalty. Surrey Place Centre programs and services receive funding from various sources and therefore all contracted services are subject to budget constraints.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 14 of 15

6.12 Bid dispute resolution process and procedure Unsuccessful vendors can request a debriefing within 60 calendar days following the date of the contract award

notification. The request should be submitted to Procurement Officer. The Procurement Officer will respond to

the vendor and arrange a vendor debriefing with 10 business days of receiving the request.

When conducting vendor debriefings, Surrey Place Centre will:

Confirm with each vendor the date, time and location of the debriefing session in writing;

Conduct separate debriefings with each vendor;

Not disclose information concerning other vendors, other than the names and addresses of vendors

who participated in the competitive process

Not answer questions unrelated to the competitive process;

Provide a general overview of the evaluation process set out in the procurement document;

Discuss strengths and weaknesses of a vendor’s submission in relation to the specific evaluation criteria.

Provide suggestions on how the supplier may improve future submissions;

Address questions and issues raised by the supplier in relation to their submission.

Subsequent the vendor debriefing, if a vendor wishes to dispute the outcome of the procurement process, the

aggrieved party is to file the bid protest in writing, with Vice President, Finance and Administration, by

registered mail, within 10 business days of the debriefing meeting. A protest in writing shall include the

following:

The name and address of the Complainant;

Identification of the contract or bid solicitation being protested;

The date of debriefing and name of procurement officer who conducted the debriefing;

Detailed and factual statement of the grounds for protest;

The Complainant’s arguments and supporting documentation; and

The Complainant’s requested remedy.

The Vice President, Finance and Administration will respond, in writing, to the Complainant within 10 business

days of receiving the protest. The final decision on the issue will come from the Vice President, Finance and

Administration, in consultation with the Chief Executive Officer and shall be considered final and conclusive.

6.13 Information disclosure Any confidential information supplied to Surrey Place Centre may be disclosed by Surrey Place Centre where it is obliged to do so under the Freedom of Information and Protection of Privacy Act (FIPPA), by an order of a court or tribunal or otherwise required at law.

Surrey Place Centre – 777 Bay St. Construction Request for Proposal

Page 15 of 15

7. Key Dates and Contact Information

RFP Issue Date January 19, 2018

Deadline for proposals February 2, 2018

Evaluation Committee recommendation to the Board of Directors for approval

February 7, 2018

Edwin Cui Financial Analyst Surrey Place Centre 2 Surrey Place, Toronto, ON M5S 2C2 edwin.cui@surreyplace.on.ca