SURGE PROTECTORS SPB SERIES SPECIFICATION
6
SPECIFICATION 83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected] For more information, please visit us at allanson.com DESCRIPTION: FEATURES: TECHNICAL SPECIFICATION: Allanson’s SPB series (Bar) Surge Protection Device (SPD) is designed to protect power equipment against power surges or disturbance. The surge protector can absorb single or multiple surges up to 10kA or 20kA (depending on the model number). SPB series protect devices from surge disturbance between Line to Neutral, Line to Ground and Neutral to Ground IP65 rated SPD for both indoor and outdoor application 277V versions are designed to protect devices with input voltage rating from 120V to 277V 480V versions are designed to protect devices with input voltage rating from 277V to 480V Green LED lights up to indicate normal operation. If LED goes off, the surge protector should be replaced SPD Type: 4CA Max case temperature of 85°C STANDARDS: “20KA” Protects against surges and transients per ANSI C62.41-2002 category C high (10KV, 1.2/50μs & 10KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave; “10KA” Protects against surges and transients per ANSI C62.41-2002 category C low (6KV, 1.2/50μs & 3KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave “20KA” Protects against surges and transients per new ANSI C82.77-5 2015 category C high (20KV, 1.2/50μs & 10KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave; “10KA” Protects against surges and transients per new ANSI C82.77-5 2015 category C medium (10KV, 1.2/50μs & 5KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave UL recognised component (UL1449) • • • • • • • • • • Part Number Description Mains Voltage Continuous Max Voltage Rating AC DC Max Clamping Voltage 8/20 μS @ 20kA SPB20KA-120-277 120-277V 320 420 1600 SPB20KA-277-480 277-480V 550 745 3000 SPB10KA-120-277 Surge Protector, SPB Series, Bar, 120-277V, 10KA Surge Protector, SPB Series, Bar, 120-277V, 20KA Surge Protector, SPB Series, Bar, 277-480V, 10KA Surge Protector, SPB Series, Bar, 277-480V, 20KA 120-277V 320 420 1500 SPB10KA-277-480 277-480V 550 715 2500 * Product can be purchased as a single unit or a carton of 20 units. SURGE PROTECTORS SPB SERIES SPECIFICATION GUIDE
Transcript of SURGE PROTECTORS SPB SERIES SPECIFICATION
SPEC
IFIC
ATIO
N
83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected]
For more information, please visit us at allanson.com
DESCRIPTION:
FEATURES:
TECHNICAL SPECIFICATION:
Allanson’s SPB series (Bar) Surge Protection Device (SPD) is designed to protect power equipment against power surges or disturbance. The surge protector can absorb single or multiple surges up to 10kA or 20kA (depending on the model number).
SPB series protect devices from surge disturbance between Line to Neutral, Line to Ground and Neutral to GroundIP65 rated SPD for both indoor and outdoor application277V versions are designed to protect devices with input voltage rating from 120V to 277V480V versions are designed to protect devices with input voltage rating from 277V to 480VGreen LED lights up to indicate normal operation. If LED goes o�, the surge protector should be replacedSPD Type: 4CA Max case temperature of 85°C
STANDARDS:“20KA” Protects against surges and transients per ANSI C62.41-2002 category C high (10KV, 1.2/50μs & 10KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave; “10KA” Protects against surges and transients per ANSI C62.41-2002 category C low (6KV, 1.2/50μs & 3KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave“20KA” Protects against surges and transients per new ANSI C82.77-5 2015 category C high (20KV, 1.2/50μs & 10KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave; “10KA” Protects against surges and transients per new ANSI C82.77-5 2015 category C medium (10KV, 1.2/50μs & 5KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring waveUL recognised component (UL1449)
•
••
•
•
• •
•
•
•
Part Number Description MainsVoltage
ContinuousMax Voltage Rating
AC DC
MaxClamping Voltage
8/20 µS @ 20kA
SPB20KA-120-277 120-277V 320 420 1600
SPB20KA-277-480 277-480V 550 745 3000
SPB10KA-120-277 Surge Protector, SPB Series, Bar, 120-277V, 10KA
Surge Protector, SPB Series, Bar, 120-277V, 20KA
Surge Protector, SPB Series, Bar, 277-480V, 10KA
Surge Protector, SPB Series, Bar, 277-480V, 20KA
120-277V 320 420 1500
SPB10KA-277-480 277-480V 550 715 2500
* Product can be purchased as a single unit or a carton of 20 units.
SURGE PROTECTORSSPB SERIES
SPECIFICATION GUIDE
SPEC
IFIC
ATIO
N
83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected]
For more information, please visit us at allanson.com
#21-4102321
WIRING DIAGRAM:
DIMENSIONS:
TECHNICAL SPECIFICATION (CONT’D):
Pulse Rating(8 x 20 μSec)
Strikes
Surge (A)
1 2 10 100 1,000
10,000 6,500 3,000 1,500 700
OutputGROUND
COM
LINE
SurgeProtector
LED Driver(s)and/or
Electronic Ballast(s)
Green
White
Black
“10KA”
Pulse Rating(8 x 20 μSec)
Strikes
Surge (A)
1 2 15 120
20,000 15,000 10,000 3,000
“20KA”
SPB10KA-120-277 / SPB10KA-277-480SPB20KA-120-277 / SPB20KA-277-480
Weight: 0.16 lbs / 73g
5.90”1.50”
12.00”6.02”
0.69”1.04”1.06”0.63”
0.29”
0.26”
SURGE PROTECTORSSPB SERIES
SPECIFICATION GUIDE
SPEC
IFIC
ATIO
N
83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected] FR
Pour de plus amples informations, Visitez-nous à Allanson.com
DESCRIPTION:
CARACTÉRISQUES:
SPÉCIFICATIONS TECHNIQUES:
Le protecteur de surtension de la série SPB (Barre) est conçu pour protéger les équipements électriques contre les surtensions et perturbations. Le protecteur de surtension peut absorber une ou plusieurs surtensions de 10Ka ou 20Ka selon le model.
La série SPB protège les équipement contre les perturbations entre le �l chargé et le �l neutre, le �l chargé et le�l de mise à la terre.Indice de protection IP65 La version 277V est conçue pour protéger l’unité doté d’une entrée de 120V à 277V.La version 480V est conçue pour protéger l’unité doté d’une entrée de 277V à 480V.Témoin à DEL lors d’opération normale (remplacer le protecteur de surtension si le témoin ne s’allume pas)SPD type 4CATempérature maximale de 85°C
STANDARDS:“20KA” Protects against surges and transients per ANSI C62.41-2002 category C high (10KV, 1.2/50μs & 10KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave; “10KA” Protects against surges and transients per ANSI C62.41-2002 category C low (6KV, 1.2/50μs & 3KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave“20KA” Protects against surges and transients per new ANSI C82.77-5 2015 category C high (20KV, 1.2/50μs & 10KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring wave; “10KA” Protects against surges and transients per new ANSI C82.77-5 2015 category C medium (10KV, 1.2/50μs & 5KA, 8/20μs) standard Combination waves and (6KV, 100KHz) Ring waveUL recognised component (UL1449)
•
••
•
•
• •
•
•
•
# de pièce Description VoltageVoltage
maximum en continueAC DC
Tension d’écrêtage maximum
8/20 µS @ 20kA
SPB20KA-120-277 120-277V 320 420 1600
SPB20KA-277-480 277-480V 550 745 3000
SPB10KA-120-277 Protecteur de surtension, série SPB, Barre, 120-277V, 10KA
Protecteur de surtension, série SPB, Barre, 120-277V, 20KA
Protecteur de surtension, série SPB, Barre, 277-480V, 10KA
Protecteur de surtension, série SPB, Barre, 277-480V, 20KA
120-277V 320 420 1500
SPB10KA-277-480 277-480V 550 715 2500
* Les produits peuvent être commandés à l’unité ou en boite de 20 unités.
PROTECTEUR DE SURTENSION SÉRIE SPB
GUIDE DE SPÉCIFICATION
SPEC
IFIC
ATIO
N
83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected]
Pour de plus amples informations, Visitez-nous à Allanson.com
#21-410F2521
FR
Poids: 0.16 lbs / 73g
2.23”
1.65”
12.00”
0.63”
1.71”
DIAGRAMME DE RACCORDEMENT:
DIMENSIONS:
SPÉCIFICATIONS TECHNIQUES (CONT’D):
Taux Impulsion(8 x 20 μSec)
Foudre
Surtension (A)
1 2 10 100 1,000
10,000 6,500 3,000 1,500 700
Sortie
MISE À LA TERRE
NEUTRE
LIGNE CHARGÉBloc(s) d’alimentationà DEL et/ou Ballast(s)
électronique
Protecteurs de surtensionVert
Blanc
Noir
“10KA”
Taux Impulsion(8 x 20 μSec)
Foudre
Surtension (A)
1 2 15 120
20,000 15,000 10,000 3,000
“20KA”
SPB10KA-120-277 / SPB10KA-277-480SPB20KA-120-277 / SPB20KA-277-480
PROTECTEUR DE SURTENSION SÉRIE SPB
GUIDE DE SPÉCIFICATION
ESPE
CIFI
CACI
ONES
83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected]
Para mas información visite nuestra web: allanson.com
DESCRIPCIÓN:
CARACTERÍSTICAS:
ESPECIFICACIONES TECNICAS:
El Dispositivo de Protección contra Sobretensiones (SPD) de la serie SPB (Bar) de Allanson está diseñado para proteger los equipos eléctricos contra sobretensiones o alteraciones. El protector contra sobretensiones puede absorber una o varias sobretensiones de hasta 10 kA o 20 kA (según el número de modelo).
La serie SPB protege los dispositivos de alteraciones de sobretensión entre Línea a Neutro, Línea a Tierra y Neutro a TierraSPD con clasi�cación IP65 para aplicaciones en interioresy exterioresLas versiones de 277V están diseñadas para proteger dispositivos con una clasi�cación de voltaje de entrada de 120V a 277VLas versiones de 480V están diseñadas para proteger dispositivos con entrada de voltaje nominal de 277 V a 480 VEl LED verde se enciende para indicar un funcionamiento normal.Si el LED se apaga, se debe reemplazar el protector contrasobretensiones.Tipo de SPD: 4CATemperatura máxima de 85 ° C
NORMAS:“20KA” Protege contra sobretensiones y transitorios según ANSI C62.41-2002 categoría C alta(10KV, 1.2 / 50μs y 10KA, 8 / 20μs) ondas combinadas estándar y onda de anillo (6KV, 100KHz);“10KA” Protege contra sobretensiones y transitorios según ANSI C62.41-2002 categoría C baja(6KV, 1.2 / 50μs y 3KA, 8 / 20μs) ondas combinadas estándar y onda de anillo (6KV, 100KHz)“20KA” Protege contra sobretensiones y transitorios según la nueva ANSI C82.77-5 2015 categoría C alta(20KV, 1.2 / 50μs y 10KA, 8 / 20μs) ondas combinadas estándar y onda de anillo (6KV, 100KHz);“10KA” Protege contra sobretensiones y transitorios según el nuevo ANSI C82.77-5 2015 de categoría C media(10KV, 1.2 / 50μs y 5KA, 8 / 20μs) ondas combinadas estándar y onda de anillo (6KV, 100KHz)Componente reconocido por UL (UL1449)
•
•
•
•
•
• • •
•
•
•
Catálogo Descripción TensiónVoltaje
Clasificación ContinuaMáxima TensiónAC DC
Max Voltajede Fijación
8/20 µS @ 20kA
SPB20KA-120-277 120-277V 320 420 1600
SPB20KA-277-480 277-480V 550 745 3000
SPB10KA-120-277 Protector de Sobretensión, Serie SPB, Bar, 120-277V, 10KA
Protector de Sobretensión, Serie SPB, Bar, 120-277V, 20KA
Protector de Sobretensión, Serie SPB, Bar, 277-480V, 10KA
Protector de Sobretensión, Serie SPB, Bar, 277-480V, 20KA
120-277V 320 420 1500
SPB10KA-277-480 277-480V 550 715 2500
* * El producto se puede comprar por unidad o en caja de 25 unidades.
PROTECTOR DE SOBRETENSIONSERIE SPB
GUIA DE ESPECIFICACIONES
ESPE
CIFI
CACI
ONES
83 Commerce Valley Drive E., Markham, ON L3T 7T3 ● 1.800.661.7251 ● [email protected]
Para mas información visite nuestra web: allanson.com
#21-410S2621
DIAGRAMA DE CABLEADO:
DIMENSIONES:
ESPECIFICACIONES TECNICAS (CONT’D):
Clasificación de Pulso(8 x 20 μSec)
Strikes
Sobretensión (A)
1 2 10 100 1,000
10,000 6,500 3,000 1,500 700
SalidaTIERRA
NEUTRO
LINEA
Protector deSobretensión
Fuente(s) de Poder LEDy / o
Balastra(s)Electrónica
Verde
Blanco
Negro
“10KA”
Clasificación de Pulso(8 x 20 μSec)
Strikes
Sobretensión (A)
1 2 15 120
20,000 15,000 10,000 3,000
“20KA”
SPB10KA-120-277 / SPB10KA-277-480SPB20KA-120-277 / SPB20KA-277-480
Peso:0.16 lbs / 73g
5.90”1.50”
12.00”6.02”
0.69”1.04”1.06”0.63”
0.29”
0.26”
PROTECTOR DE SOBRETENSIONSERIE SPB
GUIA DE ESPECIFICACIONES
