Support maker 3 d printing software
-
Upload
support-maker -
Category
Internet
-
view
28 -
download
2
Transcript of Support maker 3 d printing software
-
Support Maker
-
Auto Arrange objects Objects are laying in random position. so cant utilize space of platform.
There are 2 method of arrange objects.
1. Default
2. Size
Objects are arranged automatically, so that minimum space of platform occupy.
Arrange Object using Size method .Here Big size objects are arranged first,left to right.
-
Cut objects Tick on Hide Objects and set value to hide on that height.
Objects are arranged automatically, so that minimum space of platform occupy.
-
Detach objects Import .STL file which contain Multiple objects.
Then open Tools > select region to detach it from object.
-
Join objects Select two or more object from platform.
Then open Tools > select Join.
-
Export objects There are 3 type of Export objects.
1. All 2.Selected 3. Individual
All Object
Make 1 .STL file in all object.
Selected Object
Only Selected object export.
Individual Object
Make .STL file in individual object.
-
Guide Support objects Just select profile of slicer,so that software can identify thickness of layer for
guide.
Then open Manual > select region to Guide layer to enable guidance.
Red circle is the island at which support must put.
Just moves mouse on the area of the object where need guidance. Red
circle appears at the island where support should add within that layer.
-
Lite View Settings Import big sized objects.
Moving and rotating seems slow in normal view.
Then open View > lite view setting to Guide layer to enable guidance.
Objects are now in lite view, and its moving and rotating so much fast.
Untik the lite view to normal view.
-
Mirror Support Mirror Copy of object in XY axis.
Add manual Support object.
Then open List > set mirror support object.
Selected 4 support were mirror copy in 180 degree.
Manual support Mirror copy
Manual
support
Mirror copy
object in xy
axis
-
Mirror Support Mirror Copy of object in Y axis.
Add manual Support object.
Then open List > set mirror support object.
Selected 4 support were mirror copy in 180 degree.
Mirror copy
object in
y axis
-
Round Support object In circle shaped object we can add support in circle surface with single
click using round support.
Set number of support to put in round support and click on object surface.
Then open List > set mirror support object.
Selected 4 support were mirror copy in 180 degree.
Given 16 support were copied in circular way.
-
Pipe Setting object open Pipe menu > set settings like radius,top length & bottom length.
Press A key and click on object where to put top and end point of pipe.
A pipe on selected points were created.
Top and End points of pipe can be move.
-
Convert .SLC file To .STL file IMPORT .SLC FILE
.SLC FILE can view in wireframe mode.
Open Tools and Click on 3D slice to make SLC to STL
STL file is created . We can put support easily.
We can set Manual support by bamboo support or tree support.
.SLC
file
.STL
file
Click on 3D slice
to make Slc to Stl
-
Convert .SLC To Supported .SLC Import SLC file.
Then open view button click wireframe .SLC file can better view in wireframe because its a slice file.
Then make SLC to STL.
Stl file is generated. Now we can add support in Converted STL file
Then add manual bamboo support .
After that untick 3d slice,to make it again SLC.
Here we get SLC file with support .Now export it in SLC to reuse in other platform.
Import that supported SLC file can check it by doing its slice.
-
Information about object & support weight
Open Settings click on resin button set density of resin which is used to print object
Click on information button show object weight with out support.
Here weight of object displayed , but support weight is blank, because of no support added yet.
Now open manual support set some bamboo support .
Now add some more support and we will see the difference in weight of support and percentage
Object
Weight Manual bamboo
support
SupportWeig
ht
-
Multi Pipe Support Import Multi pipe file.
Add Manual Bamboo Support.
Then open Pipe menu. Add Multiple pipe support by selecting Multiple point at once.
Multiple pipe support added by one click.
Pipe support can edit also.
Without support pipe With Support pipe
-
Add label to object Open Text panel.
Select location of text on object. And add text at left side.
All operation that applies on object.can also apply on text.here we scale the text.
Here we can add the base plate of the object.Then Click on slicing button.
Here we can see the text on slice .So that we can print it object and text.
Text
Text
-
Thank You !