Suppl ement to ISOfocus - unms.sk · PDF file(Revision of ISO 13715:2000) TC 17 Steel ISO/DIS...

ISO Update

Supplement to ISOfocus November 2014

International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered Period from 01 October to 31 October 2014

These documents are currently under consideration in the technical committee.

They have been registered at the Central Secretariat.

PC 278 Anti-bribery management systems

ISO/CD 37001 Anti-bribery management systems

TC 22 Road vehicles

ISO/CD 29061-3 Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 3: Installation of child restraint systems using vehicle seat belts

ISO/CD 29061-4 Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 4: Securing of child in child restraint system and daily handling aspects

ISO/CD 29061-5 Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 5: Installation and securing of child in a booster seat

TC 23 Tractors and machinery for agriculture and forestry

ISO/DTR 15155-1 Agricultural irrigation equipment — Test facilities for agricultural irrigation equipment — Part 1: Test facilities for agricultural irrigation equipment

TC 24 Particle characterization including sieving

ISO/CD 22412 Particle size analysis — Dynamic light scattering (DLS)

TC 27 Solid mineral fuels

ISO/CD 7404-1 Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Vocabulary

TC 37 Terminology and other language and content resources

ISO/CD 24624 Language resource management — Transcription of spoken language

TC 42 Photography

ISO/CD 19567 Photography — Digital cameras — Texture reproduction measurements

TC 44 Welding and allied processes

ISO/CD 14343 Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification

ISO/CD 18276 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels — Classification

TC 54 Essential oils

ISO/CD 13171 Essential oils — Oil of origanum (Origanum vulgare ssp. hirtum.)

TC 61 Plastics

ISO/CD TS 15791-2 Plastics — Development and use of intermediate-scale fire tests for products — Part 2:

ISO/CD 16396-2 Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

ISO/CD 19927 Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beamshear test

TC 83 Sports and other recreational facilities and equipment

ISO/CD 10256-1 Head and face protection for use in ice hockey — Part 1: General requirements

ISO/CD 10256-2 Head and face protection for use in ice hockey — Part 2: Skaters — Performance requirements

ISO/CD 10256-3 Head and face protection for use in ice hockey — Part 3: Skaters — Performance requirements

ISO/CD 10256-4 Head and face protection for use in ice hockey — Part 4: Goalkeepers — Performance requirements

ISO/CD 10256-5 Head and face protection for use in ice hockey — Part 5: Neck laceration protectors for ice hockey player

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/CD 18417 Iodine charcoal sorbents for nuclear facilities — Method for defining sorption capacity index

TC 92 Fire safety

ISO/CD 19021 Prescriptive test method for determination of smoke gases emitted by fire of materials and products used in transportation

TC 94 Personal safety -- Protective clothing and equipment

ISO/CD 18889 Protective gloves for pesticide operators — Performance requirements

ISO/CD 19918 Protective clothing — Protection against liquid chemicals — Measurement of cumulative permeation of chemicals with low vapour pressure through protective clothing and glove materials

ISO/DTS 16976-1 Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates

TC 106 Dentistry

ISO/CD 7787-1 Dental rotary instruments — Cutters — Part 1: Steel laboratory cutters

ISO/CD 9873 Dental hand instruments — Reusable mirrors and handles

ISO/CD 14457 Dentistry — Handpieces and motors

ISO/CD 19715 Dentistry — Filling instruments with contra set

TC 108 Mechanical vibration, shock and condition monitoring

ISO/CD 2017-3 Mechanical vibration and shock — Resilient mounting systems — -- Part 3: Technical information to be exchanged for application of vibration isolation to new buildings

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 1217:2009/CD Amd 1

Displacement compressors — Acceptance tests — Amendment 1: Calculation of isentropic efficiency and relationship with specific energy

TC 121 Anaesthetic and respiratory equipment

ISO/CD 9170-1 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum

TC 126 Tobacco and tobacco products

ISO/CD 19290 Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS

TC 130 Graphic technology

ISO/DTR 19300 Graphic technology — Guidelines for the use of standards for print media production

TC 164 Mechanical testing of metals

ISO/CD 9649 Metallic materials — Wire — Reverse torsion test

TC 170 Surgical instruments

ISO/CD 7153-1 Surgical instruments — Materials — Part 1: Metals

TC 190 Soil quality

ISO/CD 18400-104 Soil quality — Sampling — Part 104: Strategies and statistical evaluations

ISO/CD 18400-202 Soil quality — Sampling — Part 202: Preliminary investigations

ISO/CD 18400-203 Soil quality — Sampling — Part 203: Investigation of potentially contaminated sites

ISO/CD 18400-204 Soil quality — Sampling — Part 204: Guidance on sampling of soil gas

TC 204 Intelligent transport systems

ISO/CD 13111-1 Intelligent transport systems — The use of personal ITS station to support ITS service

provision for travellers — Part 1: General information and use cases definition

TC 205 Building environment design

ISO/CD 18566-1 Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 1: Definition, symbols, technical specifications and requirements

ISO/CD 18566-2 Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 2: Determination of heating and cooling capacity of ceiling mounted radiant panels

ISO/CD 18566-3 Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 3: Design of ceiling mounted radiant panels

TC 206 Fine ceramics

ISO/CD 17562 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique

TC 207 Environmental management

ISO 14024:1999/CD Amd 1

Environmental labels and declarations — Type I environmental labelling — Principles and procedures — Amendment 1

ISO/DTS 14027 Environmental labels and declarations — Type III environmental declarations — Product Category Rule (PCR) development

TC 215 Health informatics

ISO/DTS 16843-1 Health Informatics — Categorial structures for representation of acupuncture — Part 1: Acupuncture points

ISO/DTS 16843-2 Health Informatics — Categorial structures for representation of acupuncture — Part 2: Needling

ISO/CD 25237 Health informatics — Pseudonymisation

TC 219 Floor coverings

ISO/CD 10582 Resilient floor coverings — Specification for heterogeneous vinyl flooring to include luxury vinyl tile requirements

TC 227 Springs

ISO/CD 19690-1 Disc springs — Part 1: Calculation

ISO/CD 19690-2 Disc springs — Part 2: Technical specifications

TC 249 Traditional chinese medicine

ISO/CD 18746 Traditional Chinese Medicine — Intradermal acupuncture needles

TC 262 Risk management

ISO/CD Guide 73 Risk management — Vocabulary

ISO/CD 31000 Risk management — Principles and guidelines

TC 265 Carbon dioxide capture, transportation, and geological storage

ISO/CD 27913 Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems

ISO/CD 27917 Capture, transport and geological storage of CO2 — Vocabulary

TMBG Technical Management Board - groups

ISO/IEC CD Guide 98-3

Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

JTC 1 Information technology

ISO/IEC 10646:2014/PDAM 2

Information technology — Universal Coded Character Set (UCS) — Amendment 2: Bhaiksuki, Marchen, Tangut, Zanabazar Square, and other characters

ISO/IEC CD 7811-9 Identification cards — Recording technique — Part 9: Tactile identifier mark

ISO/IEC CD 29003 Information technology — Security techniques — Identity proofing

ISO/IEC 23001-9:2014/PDAM 1

Information technology — MPEG systems technologies — Part 9: Common encryption of MPEG-2 transport streams — Amendment 1: Support of Sparse Encryption

ISO/IEC CD 18047-6 Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz

ISO/IEC CD 30113-11 Information technology — Gesture-based interfaces across devices and methods — Part 11: Single-point gesture for common system actions

DIS circulated Period from 01 October to 31 October 2014

These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 4 Rolling bearings

ISO/DIS 3245.2 Rolling bearings — Needle roller bearings, drawn cup without inner ring — Geometrical product specifications (GPS), boundary dimensions and tolerances

2014-12-16

(Revision of ISO 3245:2007)

TC 6 Paper, board and pulps

ISO/DIS 302 * Pulps — Determination of Kappa number 2015-01-23


ISO/DIS 11476 * Paper and board — Determination of CIE whiteness, C/2° (indoor illumination conditions)

2015-01-23


TC 8 Ships and marine technology

ISO/DIS 29404 * Ships and marine technology — Specific requirements for offshore wind farm components — Supply chain information flow

ISO/DIS 15016.2 Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data

2014-12-07


TC 10 Technical product documentation

ISO/DIS 13715 * Technical product documentation — Edges of undefined shape — Indication and dimensioning

2015-01-16


TC 17 Steel

ISO/DIS 5003 * Vignole railway rails 43 kg/m and above 2015-01-09


TC 20 Aircraft and space vehicles

ISO/DIS 8575 * Aerospace — Fluid systems — Hydraulic system tubing


ISO/DIS 20105 * Space data and information transfer systems — Operation of CFDP over encapsulation service

2015-01-07

ISO/DIS 20106 * Space data and information transfer systems — Mission operations common object model

2015-01-07

ISO/DIS 20107 * Space data and information transfer systems — Spacecraft onboard interface services — Device virtualization service

2015-01-07

ISO/DIS 20205 * Space data and information transfer systems — Spacecraft Onboard Interface Systems — Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control

2015-01-28

ISO/DIS 20206 * Space data and information transfer systems — IP over CCSDS space links 2015-01-28

ISO/DIS 20207 * Space data and information transfer systems — CCSDS Space Link Protocols over ETSI DVB-S2 Standard

2015-01-28

ISO/DIS 20208 * Space data and information transfer systems — Delta-DOR Raw Data Exchange Format

2015-01-28

ISO/DIS 20210 * Space data and information transfer systems — Mission Operations Message Abstraction Layer - JAVA API

2015-01-28

ISO/DIS 20211 * Space data and information transfer systems — Spacecraft Onboard Interface Services — Device Access Service

2015-01-28

ISO/DIS 20213 * Space data and information transfer systems — Spacecraft onboard interface services — Message transfer service

2015-01-28

ISO/DIS 20214 * Space data and information transfer systems — Security architecture for space data systems

2015-01-28

ISO/DIS 20215 * Space data and information transfer systems — CCSDS cryptographic algorithms

2015-01-28

ISO/DIS 20216 * Space data and information transfer systems — Spacecraft onboard interface services — Device data pooling service

2015-01-28

ISO/DIS 20217 * Space data and information transfer systems — Spacecraft onboard interface services — File and packet store services

2015-01-28

TC 21 Equipment for fire protection and fire fighting

ISO/DIS 16852 * Flame arresters — Performance requirements, test methods and limits for use

2015-03-24

(Revision of ISO 16852:2008, ISO 16852:2008/Cor 1:2008, ISO 16852:2008/Cor 2:2009)

TC 22 Road vehicles

ISO/DIS 10924-5 * Road vehicles — Circuit breakers — Part 5: Circuit breakers with tabs with rated voltage of 450 V

2015-01-16

ISO/DIS 15082 * Road vehicles — Tests for rigid plastic safety glazing materials 2015-01-29



ISO/DIS 789-3 * Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters

(Revision of ISO 789-3:1993)

ISO/DIS 5131 * Tractors for agriculture and forestry — Measurement of noise ate the operator's position — Survey method

2015-01-16


ISO/DIS 4254-7 * Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters

2015-03-24


TC 24 Particle characterization including sieving

ISO/DIS 3310-1 * Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth

2015-01-15

(Revision of ISO 3310-1:2000, ISO 3310-1:2000/Cor 1:2004)

ISO/DIS 9044 * Industrial woven wire cloth — Technical requirements and tests 2015-01-16


TC 27 Solid mineral fuels

ISO/DIS 5074 * Hard coal — Determination of Hardgrove grindability index 2015-01-07


TC 28 Petroleum products and lubricants

ISO/DIS 4263-3.2 * Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids

2014-12-17


TC 34 Food products

ISO/DIS 16634-2 * Food products — Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products

2015-03-03

(Revision of ISO/TS 16634-2:2009)

ISO/DIS 27105 * Milk and cheese — Determination of hen's egg white lysozyme content by high performance liquid chromatography

2015-01-30

(Revision of ISO/TS 27105:2009)

ISO/DIS 11290-1 * Microbiology of the food chain — Horizontal method for the detection and enumeration of Listeria monocytogenes and other Listeria spp. — Part 1: Detection method

2015-03-31

(Revision of ISO 11290-1:1996, ISO 11290-1:1996/Amd 1:2004)

ISO/DIS 11290-2 * Microbiology of the food chain — Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. — Part 2: Enumeration method

(Revision of ISO 11290-2:1998, ISO 11290-2:1998/Amd 1:2004)

ISO/DIS 18465 * Microbiology of the food chain - Quantitative analysis of emetic toxin (cereulide) using LC-MS/MS

2015-03-10

ISO/DIS 17780 * Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable oils

2015-01-24

TC 35 Paints and varnishes

ISO/DIS 2811-1 * Paints and varnishes — Determination of density — Part 1: Pycnometer method

2015-03-17


ISO/DIS 20567-1 * Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing

2015-03-17


ISO/DIS 20567-2 * Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body

2015-03-17


TC 39 Machine tools

ISO/DIS 19085-1 * Woodworking machines — Safety — Part 1: Common requirements 2015-03-03

ISO/DIS 19085-2 * Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines

2015-03-17

TC 43 Acoustics

ISO/DIS 389-3 * Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators

2015-03-10

(Revision of ISO 389-3:1994, ISO 389-3:1994/Cor 1:1995)

ISO/DIS 362-3 * Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories

2015-01-07


ISO/DIS 9692-3 * Welding and allied processes — Recommendations for joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys

2015-03-10


TC 58 Gas cylinders

ISO/DIS 15453 * Gas cylinders - Seamless steel and aluminium-alloy gas cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions

2015-01-23

TC 59 Buildings and civil engineering works

ISO/DIS 16757-2 * Data structures for electronic product catalogues for building services — Part 2: Geometry

2015-02-08

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO/DIS 17348 * Petroleum and natural gas offshore platforms — Guidelines for materials selection for high content CO2 environment for casings, tubings and downhole equipment

2015-03-03

TC 68 Financial services

ISO/DIS 10962.2 * Securities and related financial instruments — Classification of financial instruments (CFI code)


TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO/DIS 11040-1 * Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges

2015-01-09


TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS 12749-4 * Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing

2015-01-07

ISO/DIS 16639 * Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities

2015-01-28

TC 92 Fire safety

ISO/DIS 16730-1 * Fire safety engineering — Procedures and requirements for verification and validation of calculation methods — Part 1: General

2015-01-28


TC 94 Personal safety -- Protective clothing and equipment

ISO/DIS 20349-1 * Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries

2015-02-03


ISO/DIS 20349-2 * Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes

2015-02-03


ISO 12312-1:2013/DAmd 1

* Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1

2015-03-10

TC 106 Dentistry

ISO/DIS 3964 * Dentistry — Coupling dimensions for handpiece connectors 2015-03-03


ISO/DIS 14801 * Dentistry — Implants — Dynamic fatigue test for endosseous dental implants 2015-03-10


TC 117 Fans

ISO/DIS 5801 * Fans — Performance testing using standardized airways 2015-03-17

(Revision of ISO 5801:2007, ISO 5801:2007/Cor 1:2008)

TC 126 Tobacco and tobacco products

ISO/DIS 6565 * Tobacco and tobacco products — Draw resistance of cigarettes and pressure 2015-01-23

drop of filter rods — Standard conditions and measurement


TC 127 Earth-moving machinery

ISO 9244:2008/DAmd 1

* Earth-moving machinery — Machine safety labels — General principles — Amendment 1

2015-01-21

TC 131 Fluid power systems

ISO/DIS 12829 * Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope

ISO/DIS 21018-4 * Hydraulic fluid power — Monitoring the level of particulate contamination in the fluid — Part 4: Use of the light extinction technique

2015-01-28

TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings

ISO/DIS 18163 * Clothing — Digital fittings — Vocabulary and terminology used for the virtual garment

2015-01-14

TC 136 Furniture

ISO/DIS 7170 * Furniture — Storage units — Determination of strength and durability 2015-01-23


ISO/DIS 7171 * Furniture — Storage units — Determination of stability 2015-01-23


ISO/DIS 7173 * Furniture - Seating - Test methods for the determination of strength and durability

2015-01-08


ISO/DIS 19682 * Furniture — Tables — Test methods for the determination of stability, strength and durability

2015-01-08

TC 142 Cleaning equipment for air and other gases

ISO/DIS 16890-1 * Air filters for general ventilation — Part 1: Technical specifications, requirements and efficiency classification system based upon Particulate Matter (PM)

2015-03-10

TC 147 Water quality

ISO/DIS 7027-1 * Water quality — Determination of turbidity — Part 1: Quantitative methods 2015-03-10


ISO/DIS 17294-2 * Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes

2015-03-24


ISO/DIS 18635 * Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment and suspended (particulate) matter — Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)

2015-03-31

TC 149 Cycles

ISO/DIS 11243 * Cycles — Luggage carriers for bicycles — Requirements and test methods

2015-03-03


TC 159 Ergonomics

ISO/DIS 7250-3 * Basic human body measurements for technological design — Part 3: Worldwide and regional design values for use in ISO equipment standards

ISO/DIS 20685-2 * 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions

TC 171 Document management applications

ISO/DIS 32000-2 * Document management — Portable document format — Part 2: PDF 2.0 2015-01-22

TC 184 Automation systems and integration

ISO/DIS 11354-2 * Advanced automation technologies and their applications — Requirements for establishing manufacturing enterprise process interoperability — Part 2: Maturity model for assessing enterprise interoperability

2015-01-28

TC 188 Small craft

ISO/DIS 9094.3 * Small craft — Fire protection 2014-12-17

(Revision of ISO 9094-2:2002, ISO 9094-1:2003)

ISO/DIS 10087 * Small craft — Craft identification — Coding system 2015-03-17


ISO/DIS 11591 * Small craft — Field of vision from helm position 2015-03-10


ISO/DIS 14895 * Small craft — Liquid-fuelled galley stoves and heating appliances 2015-03-24


TC 190 Soil quality

ISO/DIS 15009 * Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption

2015-03-03


TC 192 Gas turbines

ISO/DIS 19859.2 * Gas turbine applications — Requirements for power generation 2014-12-25

TC 194 Biological and clinical evaluation of medical devices

ISO/DIS 10993-6 * Biological evaluation of medical devices — Part 6: Tests for local effects after implantation

2015-03-17


TC 201 Surface chemical analysis

ISO/DIS 18554 * Surface Chemical Analysis - Electron Spectroscopies - Proceedures for Identifying, Estimating and Correcting for Unintended Degradation by X-rays in a Material Undergoing Analysis by X-Ray Photoelectron Spectroscopy

2015-01-21

TC 204 Intelligent transport systems

ISO/DIS 17515-1 * Intelligent transport systems — Communications access for land mobiles (CALM) - Evolved Universal Terrestrial Radio Access Network (E-UTRAN) — Part 1: General usage

2015-01-09

TC 209 Cleanrooms and associated controlled environments

ISO/DIS 14644-14 * Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration

2015-03-03

TC 210 Quality management and corresponding general aspects for medical devices

ISO/DIS 18250-8 * Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications

2015-01-21


ISO/DIS 14199 * Health informatics — Information models — Biomedical Research Integrated Domain Group (BRIDG) Model

2015-01-07

TC 220 Cryogenic vessels

ISO/DIS 21013-3 * Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination

2015-03-17


TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

ISO/DIS 24521 * Activities relating to drinking water and wastewater services — Guidelines for the management of basic onsite domestic wastewater services

2015-01-22

TC 249 Traditional chinese medicine

ISO/DIS 18664 * Traditional Chinese Medicine — Determination of heavy metals in herbal 2015-01-28

medicines used in Traditional Chinese Medicine

TC 261 Additive manufacturing

ISO/DIS 17296-1 * Additive manufacturing — General principles — Part 1: Terminology 2015-01-29


ISO/IEC DIS 20243 * Open Trusted Technology Provider Standard (O-TTPS) — Mitigating maliciously tainted and counterfeit products

2015-01-29

ISO/IEC DIS 40314 * Information technology — Mathematical Markup Language (MathML) Version 3.0 2nd Edition

ISO/IEC/IEEE DIS 29119-5

* Software and systems engineering — Software testing — Part 5: Keyword-driven testing

2014-12-30

ISO/IEC DIS 18328-2

* Information technology — ICC-managed devices — Part 2: Physical characteristics and test methods for cards with devices

2015-01-23

ISO/IEC 14496-3:2009/DAmd 5

* Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 5: Support for Dynamic Range Control

2015-01-09

ISO/IEC DIS 14496-11

* Information technology — Coding of audio-visual objects — Part 11: Scene description and application engine

2015-01-09

(Revision of ISO/IEC 14496-11:2005)


* Information technology — Coding of audio-visual objects — Part 22: Open Font Format

2015-01-09

(Revision of ISO/IEC 14496-22:2009, ISO/IEC 14496-22:2009/Amd 1:2010, ISO/IEC 14496-22:2009/Cor 1:2010, ISO/IEC 14496-22:2009/Amd 2:2012)


* Information technology — Coding of audio-visual objects — Part 31: Video coding for browsers

2015-01-14


* Information technology — MPEG systems technologies — Part 10: Carriage of Timed Metadata Metrics of Media in ISO Base Media File Format

2015-01-23

ISO/IEC DIS 23003-4

* Information technology — MPEG audio technologies — Part 4: Dynamic Range Control

ISO/IEC 23008-2:2013/DAmd 4

* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 4

2015-01-16

ISO/IEC DIS 23008-3

* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio

2015-01-29


* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 12: Image file format

2015-01-14

ISO/IEC 23009-1:2014/DAmd 2

* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 2: Spatial relationship description, generalized URL parameters and other extensions

2015-01-07

ISO/IEC 24800-2:2011/DAmd 1

* Information technology — JPSearch — Part 2: Registration, identification and management of schema and ontology — Amendment 1: JPEG Ontology for Image Description

2015-01-09

ISO/IEC 24800-3:2010/DAmd 1

* Information technology — JPSearch — Part 3: Query format — Amendment 1: JPSearch API

2015-01-09

ISO/IEC DIS 29170-2

* Information technology — Advanced image coding and evaluation — Part 2: Evaluation procedure for nearly lossless coding

2015-01-16


* Information technology — Radio frequency identification for item management — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C

2015-01-28


ISO/IEC DIS 29794-1

* Information technology — Biometric sample quality — Part 1: Framework 2015-01-22


ISO/IEC DIS 18384-1

* Information technology — Reference Architecture for Service Oriented Architecture (SOA RA) — Part 1: Terminology and Concepts for SOA

2015-01-14

ISO/IEC DIS 18384-2

* Information Technology - Reference Architecture for Service Oriented Architecture (SOA RA) — Part 2: Reference Architecture for SOA Solutions

2015-01-14

ISO/IEC DIS 18384-3

* Distributed Application Platforms and Services (DAPS) — Reference Architecture for Service Oriented Architecture (SOA) — Part 3: Service Oriented Architecture Ontology

2015-01-14

FDIS circulated Period from 01 October to 31 October 2014

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown

* Available in English only

Vote terminates

IIW International Institute of Welding

ISO/FDIS 14373 * Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels

2014-12-03


JPC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology

ISO/IEC FDIS 13273-1

* Energy efficiency and renewable energy sources — Common international terminology — Part 1: Energy efficiency

2015-01-10


* Energy efficiency and renewable energy sources — Common international terminology — Part 2: Renewable energy sources

2015-01-10

TC 6 Paper, board and pulps

ISO/FDIS 12625-9 * Tissue paper and tissue products — Part 9: Determination of ball burst 2014-12-03

strength


ISO/FDIS 12625-15 * Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant

2014-12-03

ISO/FDIS 12625-16 * Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method

2014-12-03

TC 8 Ships and marine technology

ISO/FDIS 9876 * Ships and marine technology — Marine facsimile receivers for meteorological charts

2014-12-29


ISO/FDIS 22554 * Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type

2014-12-09


ISO/FDIS 17941 * Ships and marine technology — Hydraulic hinged watertight fireproof doors 2014-12-29

TC 10 Technical product documentation

ISO/FDIS 14084-2 * Process diagrams for power plants — Part 2: Graphical symbols 2014-12-29


ISO/FDIS 24253-1 * Crop protection equipment — Spray deposit test for field crop — Part 1: Measurement in a horizontal plane

2014-12-07

ISO/FDIS 24253-2 * Crop protection equipment — Spray deposit test for field crop — Part 2: Measurement in a crop

2014-12-14

TC 34 Food products

ISO 29842:2011/FDAmd 1

* Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1

2014-12-16

ISO 8455:2011/FDAmd 1

* Green coffee — Guidelines for storage and transport — Amendment 1 2014-12-23

TC 35 Paints and varnishes

ISO/FDIS 3233-3 * Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material

2014-12-24


TC 42 Photography

ISO/FDIS 15781 * Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time

2014-12-30



ISO/FDIS 18278-1 * Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

2014-12-17


TC 45 Rubber and rubber products

ISO/FDIS 1823 * Rubber hose and hose assemblies for oil suction and discharge service — Specification

2014-12-17

(Revision of ISO 1823-1:1997, ISO 1823-2:1997)

ISO 28017:2011/FDAmd 1

* Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification — Amendment 1

2014-12-17

TC 59 Buildings and civil engineering works

ISO/FDIS 12006-2 * Building construction — Organization of information about construction works — Part 2: Framework for classification

2014-12-29


TC 61 Plastics

ISO 899-1:2003/FDAmd 1

* Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1

2014-12-17

TC 72 Textile machinery and accessories

ISO/FDIS 23771 * Textile machinery — Guide to the design of textile machinery for reduction of the noise emissions

2014-12-03

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO/FDIS 11040-4 * Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling

2014-12-28


ISO/FDIS 11040-7 * Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling

2014-12-28

TC 98 Bases for design of structures

ISO/FDIS 2394 * General principles on reliability for structures 2014-12-04


TC 106 Dentistry

ISO/FDIS 24234.2 * Dentistry — Dental amalgam 2014-12-03

(Revision of ISO 24234:2004, ISO 24234:2004/Amd 1:2011)

ISO/FDIS 7494-2 * Dentistry — Dental units — Part 2: Air, water, suction and wastewater system

2014-12-10

(Revision of ISO 11144:1995, ISO 7494-2:2003)

TC 107 Metallic and other inorganic coatings

ISO/FDIS 4528 * Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

2014-12-03


TC 108 Mechanical vibration, shock and condition monitoring

ISO/FDIS 10816-21 * Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox

2014-12-28

ISO 5349-2:2001/FDAmd 1

* Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace — Amendment 1

2014-12-24

TC 119 Powder metallurgy

ISO/FDIS 14317 * Sintered metal materials excluding hardmetals — Determination of compressive yield strength

2014-12-29


TC 120 Leather

ISO/FDIS 14931 * Leather — Guide to the selection of leather for apparel (excluding furs) 2014-12-03


TC 121 Anaesthetic and respiratory equipment

ISO/FDIS 5356-1 * Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets

2014-12-10


TC 131 Fluid power systems

ISO/FDIS 18413 * Hydraulic fluid power — Cleanliness of parts and components — Inspection document and principles related to contaminant collection, analysis and data reporting

2014-12-14


TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/FDIS 3501 * Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force

2014-12-31


ISO/FDIS 6259-3 * Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

2014-12-03


ISO/FDIS 13844 * Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

2014-12-24


ISO/FDIS 13845 * Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pipes — Test method for leaktightness under internal pressure and with angular deflection

2014-12-24


TC 147 Water quality

ISO/FDIS 17690 * Water quality — Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection

2014-12-23

ISO/FDIS 9697 * Water quality — Measurement of gross beta activity in non-saline water — Thick source method

2014-12-28


ISO/FDIS 17244 * Water quality - Determination of the toxicity of water samples on the embryo-larval development of Japanese oyster (Crassostrea gigas) and blue mussel (Mytilus edulis or galloprovincialis)

2014-12-28

TC 156 Corrosion of metals and alloys

ISO/FDIS 18086 * Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria

2014-12-21

TC 164 Mechanical testing of metals

ISO/FDIS 6892-3 * Metallic materials — Tensile testing — Part 3: Method of test at low temperature

2014-12-03


TC 172 Optics and photonics

ISO/FDIS 9022-3 * Optics and photonics — Environmental test methods — Part 3: Mechanical stress


ISO/FDIS 9022-6 * Optics and photonics — Environmental test methods — Part 6: Dust


ISO/FDIS 9022-7 * Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain


ISO/FDIS 9022-8 * Optics and photonics — Environmental test methods — Part 8: High pressure, low pressure, immersion


TC 190 Soil quality

ISO/FDIS 11074 * Soil quality — Vocabulary 2014-12-17

(Revision of ISO 11074:2005, ISO 11074:2005/Cor 1:2006)


ISO/FDIS 22077-1 * Health informatics — Medical waveform format — Part 1: Encoding rules

2014-12-21

(Revision of ISO/TS 11073-92001:2007)

TC 221 Geosynthetics

ISO/FDIS 10318-1 * Geosynthetics — Part 1: Terms and definitions 2014-12-24


ISO/FDIS 10318-2 * Geosynthetics — Part 2: Symbols and Pictograms 2014-12-24


TC 238 Solid biofuels

ISO/FDIS 16948 * Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen

2014-12-31

ISO/FDIS 16968 * Solid biofuels — Determination of minor elements 2014-12-10

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 17070 * Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

2014-12-03


ISO/FDIS 17228 * Leather — Tests for colour fastness — Change in colour with accelerated ageing

2014-12-03



ISO/IEC/IEEE FDIS 23026

* Systems and software engineering — Engineering and management of websites for systems, software, and services information

2014-12-30

(Revision of ISO/IEC 23026:2006)

ISO/IEC/IEEE FDIS 26531

* Systems and software engineering — Content management for product life-cycle, user and service management documentation

2014-12-30

ISO/IEC 14496-12:2012/FDAmd 3

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 3: Enhanced audio support and other improvements

2014-12-11

ISO/IEC 15444-12:2012/FDAmd 3

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 3: Font streams and other improvements to file format

2014-12-11

ISO/IEC 23002-4:2014/FDAmd 2

* Information technology — MPEG video technologies — Part 4: Video tool library — Amendment 2: FU and FN descriptions for HEVC

2014-12-29


* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: HEVC Conformance testing and reference software

2014-12-30


* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance Specification for HEVC

2014-12-30


* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 11: MPEG Media Transport Composition Information

2014-12-30


* Information technology for learning, education and training — Information model for competency — Part 2: Proficiency level information model

2014-12-23

ISO/IEC 19794-1:2011/FDAmd 2

* Information technology — Biometric data interchange formats — Part 1: Framework — Amendment 2: Framework for XML encoding

2014-12-23


* Information technology — Biometric sample quality — Part 6: Iris image data

2014-12-17

Suppl ement to ISOfocus - unms.sk · PDF file(Revision of ISO 13715:2000) TC 17 Steel ISO/DIS...

Documents

Transcript of Suppl ement to ISOfocus - unms.sk · PDF file(Revision of ISO 13715:2000) TC 17 Steel ISO/DIS...