SUPERVISOR SAFETY TRAINING

80
1 SUPERVISOR SAFETY TRAINING

description

SUPERVISOR SAFETY TRAINING. Your Safety Manager or Safety Representative is not the program nor is he responsible for you and your subordinates safety. YOU ARE!. WHO, ME???. SUPERVISOR'S SAFETY TRAINING. You are not only a big part of the Safety Program. YOU ARE THE KINGPIN. - PowerPoint PPT Presentation

Transcript of SUPERVISOR SAFETY TRAINING

Page 1: SUPERVISOR SAFETY TRAINING

1

SUPERVISOR SAFETY TRAINING

Page 2: SUPERVISOR SAFETY TRAINING

2

• Your Safety Manager or Safety Representative is not the program nor is he responsible for you and your subordinates safety.

YOU ARE!

WHO, ME???

Page 3: SUPERVISOR SAFETY TRAINING

3

SUPERVISOR'S SAFETY TRAINING

Page 4: SUPERVISOR SAFETY TRAINING

4

You are not only a big part of the Safety Program

YOU ARE THE KINGPIN

•Without you there is no Safety Program•Don’t risk an unnecessary injury, illness, or

accident. It’s the law, your job and it’s COMMON SENSE!

Page 5: SUPERVISOR SAFETY TRAINING

5

OBJECTIVE:

• Upon completion of this training you will have a better understanding of your role and responsibilities as a supervisor in regards to safety:

Page 6: SUPERVISOR SAFETY TRAINING

6

Topics we will discuss:

• Governing Law and Directives

• Command’s Safety Policy

• Why is Supervisors Safety Training Required?

• Who are Supervisory Personnel?

• Supervisor’s Responsibilities

Page 7: SUPERVISOR SAFETY TRAINING

7

Topics (continued)

• NAVOSH Deficiency Abatement Program

• Mishap Prevention, Investigation, and Reporting

• Operational Risk Management (ORM)

• Hazardous Material Control & Management

Page 8: SUPERVISOR SAFETY TRAINING

8

GOVERNING DIRECTIVES

Occupational Safety and Health Act (OSH ACT) of 1970

Section 5(a) of the OSHA ACT: GENERAL DUTY CLAUSE

“Employers will furnish to employees a place of employment free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees”.

Page 9: SUPERVISOR SAFETY TRAINING

9

Why is Supervisors Safety Training Required?

• OPNAVINST 5100.23F (NAVOSH Program Manual) requires the training be received within 180 days of assignment as a supervisor. The training enables supervisors to:

Develop skills to manage OSH programs at work unit level)

Page 10: SUPERVISOR SAFETY TRAINING

10

Enable recognition of unsafe and unhealthful working conditions

Manage the activity’s OSH Program at the work unit level

Evaluate OSH performance of subordinates

Conduct MISHAP InvestigationProperly use and maintain personal

protective equipment (PPE)

Page 11: SUPERVISOR SAFETY TRAINING

11

WHAT IS A SUPERVISOR?• OPNAVINST 5100.23 defines as military personnel, E-5 or

above, and civilian personnel who give direction to one or more military and/or civilian personnel.

• Another definition might be, “One who has the responsibility for providing subordinates directions and controls their day to day work activities”.

SUPERVISOR

•Supervisors are the link between •management and workers.

Page 12: SUPERVISOR SAFETY TRAINING

12

What are my responsibilities as a Supervisor?

• Federal law states that as a supervisor you are legally required to ensure that all those over which you supervise follow the safety rules and regulations of the organization (the Navy, CFAY).

• You must protect those under you from all hazards (recognized and potential).

Page 13: SUPERVISOR SAFETY TRAINING

13

As a Supervisor you must monitor the following

programs if they are being utilized in your work center:

*HEARING CONSERVATION *SIGHT CONSERVATION*RESPIRATORY PROTECTION *FOOT PROTECTION*HEAD PROTECTION *HAND PROTECTION *BLOODBORNE PATHOGENS*ASBESTOS CONTROL *MAN-MADE VITREOUS FIBERS *BACK INJURY PREVENTION/ERGONOMICS*LEAD *CONFINED SPACE ENTRY*OCCUPATIONAL REPRODUCTIVE HAZARDS*WEIGHT HANDLING/MATERIAL HANDLING*ENERGY CONTROL (LOCK-OUT/TAG-OUT)*HAZARDOUS MATERIAL

Page 14: SUPERVISOR SAFETY TRAINING

14

Lists 14 things a manger or supervisorLists 14 things a manger or supervisor

are to do to support the OSH Program

THESE WILL BE HIGHLIGHTED HIGHLIGHTED AS WE COVER THE VARIOUS

TOPICS

DANGERPETROL PLANTNO DRILLING

Gee, I hope itsSafe to drill here!

Page 15: SUPERVISOR SAFETY TRAINING

15

• Role Models (if you cut corners, so will they).• YOU SET THE TONE IN A WORKCENTER

• Provide detailed Instructions for a particular job.

• If a worker asks about a particular substance or process, give a complete answer. If you don’t know, find out.

• LEAD BY EXAMPLE

#1 SET THE EXAMPLE#1 SET THE EXAMPLE

Page 16: SUPERVISOR SAFETY TRAINING

16

• YOUR PEOPLE SHOULD: • Follow safety rules and instructions• Report Hazards• Correct Hazards• Report Mishaps

#2 CORRECT RECOGNIZED #2 CORRECT RECOGNIZED HAZARDS:HAZARDS:

A. INSPECTIONSB. WORKER INFO/INPUTC. SOMEONE SEES A MISHAP

Page 17: SUPERVISOR SAFETY TRAINING

17

#2 CORRECT RECOGNIZED #2 CORRECT RECOGNIZED HAZARDS (CONT’D):HAZARDS (CONT’D):

-CORRECT A HAZARD IMMEDIATELY-USE INTERIM CONTROLS UNTIL CORRECTED-CONTACT THE SAFETY OFFICE ASAP IF HAZARD IS CONSIDERED BY YOU TO BE LIFE THREATENING- ASK SAFETY FOR A RISK ASSESSMENT WHEN HAZARD IS NOT LIFE THREATENING AND CANNOT BE CORRECTED IMMEDIATELY

Page 18: SUPERVISOR SAFETY TRAINING

18

You must have a broad understanding of

the command’s Safety Program.

Your safety program depends on your subordinates being actively involved.

THIS IS A GOOD METHOD TO GET THEM INVOLVED

#3 ASSIGN OSH #3 ASSIGN OSH RESPONSIBILITIESRESPONSIBILITIESTO SUBORDINATESTO SUBORDINATES

Page 19: SUPERVISOR SAFETY TRAINING

19

#4 DOCUMENT SUBORDINATES#4 DOCUMENT SUBORDINATESOSH PERFORMANCEOSH PERFORMANCE

OPNAVINST 5100.23F, para. 0207 states,“Supervisors develop procedures ..to measure &

recognize superior and deficient performance”. It alsosays “performance evals shall include personal

accountability consistent with the duties of the position”.

Its Performance Evaluation

Time!

EMPLOYEEPERFORMANCE

Page 20: SUPERVISOR SAFETY TRAINING

20

#5 ENSURE EMPLOYEES#5 ENSURE EMPLOYEES RECEIVE OSH RECEIVE OSH

TRAININGTRAININGNEW EMPLOYEE:-COMMAND OSH POLICY-WORK UNIT OSH POLICY ..YOU NEED AN OSH POLICY AS A SUPERVISOR-INDIVIDUAL RESPONSIBILITY FOR SAFETY-EMPLOYEE REPORTING PROCEDURES (NAVOSH 5100/11)-HAZARDS OF THE WORKSITE SPECIFIC CHEMICALS & THE HAZCOM PLAN-INTRO TO THE OCCUPATIONAL HEALTH PROGRAM… DD2272-PPE REQUIREMENTS (HINT…. USE THE ORIENTATION CHECKLIST CERTIFICATE)

SPECIALIZED TRAINING:-SPECIFIC TO THE WORKSITE-MUST COVER RELEVANT NAVOSH STANDARDS & COVER ANY SOPs

Page 21: SUPERVISOR SAFETY TRAINING

21

# 6 PARTICIPATE IN OSH# 6 PARTICIPATE IN OSH COMMITTEE MEETINGSCOMMITTEE MEETINGS-TO IMPROVE SAFETY BOTH BASE & COMMAND WIDE-WE NEED YOUR INPUT

#7 PARTICIPATE IN OTHER OSH#7 PARTICIPATE IN OTHER OSH ACTIVITIES ACTIVITIES OSH POLICY COUNCIL TRAFFIC SAFETY COMMITTEESAFETY AWARDS CEREMONY

#8 CONDUCT YOUR OWN OSH#8 CONDUCT YOUR OWN OSHMEETINGS/TRAININGMEETINGS/TRAINING

STAND-UP SAFETY MEETING JOB-SPECIFIC HAZARD TRAINING

Page 22: SUPERVISOR SAFETY TRAINING

22

HAZARDS!• Hazards are generally grouped into two

broad categories:(1) those dealing with Safety and Injuries(1) those dealing with Safety and Injuries

(2) Those dealing with Health and Illnesses(2) Those dealing with Health and Illnesses

#9 CONDUCT WORKSITE #9 CONDUCT WORKSITE INSPECTIONSINSPECTIONSOPNAVINST 5100.23F, para. 0903, “line supervisorsOPNAVINST 5100.23F, para. 0903, “line supervisorsare responsible for day-to-day inspections & are responsible for day-to-day inspections & corrective actions”corrective actions”*YOU KNOW YOUR WORKPLACE*YOU KNOW YOUR WORKPLACE*BE PRO-ACTIVE, IDENTIFY & CORRECT*BE PRO-ACTIVE, IDENTIFY & CORRECT DEFICIENCIES DEFICIENCIES BEFORE BEFORE SAFETY ARRIVESSAFETY ARRIVES

Page 23: SUPERVISOR SAFETY TRAINING

23

#10 PARTICIPATE IN SAFETY #10 PARTICIPATE IN SAFETY OFFICE WORKSITE OFFICE WORKSITE

INSPECTIONSINSPECTIONS-LEARN WHAT TO LOOK FOR-LEARN WHAT TO LOOK FOR

-CORRECT DEFICIENCIES IDENTIFIED-CORRECT DEFICIENCIES IDENTIFIEDIMMEDIATELYIMMEDIATELY!!!!!!

Unsafe Conditions can be Unsafe Conditions can be identified byidentified by:

• Inspections (Safety or Supervisor)

• Mishap Analysis (someone got hurt)

• Hazard Reports (OPNAV 5100/11)

• Risk Analysis

Page 24: SUPERVISOR SAFETY TRAINING

24

#11 ENCOURAGE SAFETY #11 ENCOURAGE SAFETY THROUGH AWARDS PROGRAMTHROUGH AWARDS PROGRAM

To stimulate interest in accident prevention, a Safety To stimulate interest in accident prevention, a Safety Awards Program has been developed and implemented.Awards Program has been developed and implemented.

-NEEDS YOUR PARTICIPATION & INPUT-NEEDS YOUR PARTICIPATION & INPUTSEE CFAYINST 5100.D CH-1, CHAP 11SEE CFAYINST 5100.D CH-1, CHAP 11

-Reporting a “Safe Act” -Annual Award for “No Mishaps”-Submit an OPNAV 5100/11 -Report a “near miss”

-Notify SUPERVISOR of a safety discrepancy -Other annual awards (driving, materials handling, construction)

#12 RECEIVE YOUR OWN TRAINING#12 RECEIVE YOUR OWN TRAINING-WHAT IS REQUIRED BY YOUR WORKSITE-WHAT IS REQUIRED BY YOUR WORKSITE

IF UNSURE, ASK IF YOUR TRAINING IS ADEQUATEIF UNSURE, ASK IF YOUR TRAINING IS ADEQUATESUPERVISOR MISHAP INVESTIGATION TRAININGSUPERVISOR MISHAP INVESTIGATION TRAINING

Page 25: SUPERVISOR SAFETY TRAINING

25

# 13 PERSONAL PROTECTIVE# 13 PERSONAL PROTECTIVEEQUIPMENTEQUIPMENT

-SUPERVISORS RESPONSIBLE THAT PEOPLE USE IT-SUPERVISORS RESPONSIBLE THAT PEOPLE USE IT-TRAIN PERSONNEL ON HOW TO TAKE CARE OF IT-TRAIN PERSONNEL ON HOW TO TAKE CARE OF IT

-IF UNSURE OF PPE REQUIREMENTS FOR A -IF UNSURE OF PPE REQUIREMENTS FOR A PROCESS OR MACHINERY,ASK SAFETY FOR A PROCESS OR MACHINERY,ASK SAFETY FOR A

RISK ANALYSISRISK ANALYSIS

Page 26: SUPERVISOR SAFETY TRAINING

26

#14 ENCOURAGE THE SHARING #14 ENCOURAGE THE SHARING OF IDEASOF IDEAS

-USE YOUR PEOPLE’S IDEAS TO MAKE WORK -USE YOUR PEOPLE’S IDEAS TO MAKE WORK EASIEREASIER

-GOOD IDEAS BENEFIT EVERYONE-GOOD IDEAS BENEFIT EVERYONE SAFETY

Page 27: SUPERVISOR SAFETY TRAINING

27

• FACILITY INSPECTIONS• Inspections conducted at least annually by the

CFAY Safety Office.• Supervisors are notified verbally of inspection

results at time of inspection.• Deficiency Notices (for significant findings) are

issued by the Safety Office within 15 working days after the inspection.

• Deficiencies not corrected within 30 days are entered into the NAVOSH Deficiency Abatement Program.

Page 28: SUPERVISOR SAFETY TRAINING

28

HAZARD RECOGNITIONRECOGNITION• Falls

• Struck By

• Struck Against

• Caught In, On, Or Between

• Contact

• Breathing/Swallowing

Page 29: SUPERVISOR SAFETY TRAINING

29

HAZARD ABATEMENTABATEMENT• Engineering Controls

• Guards

• Warning Devices

• Administrative Controls

• Training

• Personal Protective Equipment (least preferred)

Page 30: SUPERVISOR SAFETY TRAINING

30

Severity + Probability Severity + Probability of Occurrence = RACof Occurrence = RAC

HOW DO WE DECIDE HOW SEVERE A PROBLEM IS?

Page 31: SUPERVISOR SAFETY TRAINING

31

NAVOSH Deficiency Notice• Written for workplace hazards with a RAC 1, 2, or 3

that can not be corrected immediately.

• The official in charge of the operation shall take prompt action to correct the hazard.

• A copy of the notice must be posted in the area of the hazard until the hazard has been corrected.

• The posted notice should be updated as necessary to accurately reflect the status of the abatement action and interim controls.

JT BaffoonDivision Supervisor

NAVOSH

DEFICIENCY

NOTICE

Page 32: SUPERVISOR SAFETY TRAINING

32

Causes of mishaps can be divided into two categories

• Unsafe conditions

– Easier to recognize and correct

– Covered by regulations that identify and regulate conditions

– Identified during scheduled inspections

– Every individual’s responsibility to correct or report unsafe conditions

UH OH

Page 33: SUPERVISOR SAFETY TRAINING

33

Unsafe Acts

• More difficult to recognize and correct because they involve human factors.

• More accidents are attributed to unsafe acts than to unsafe conditions (approx. 85%).

• Many accidents can be attributed to both.

• Unsafe acts occur both on and off duty.

Page 34: SUPERVISOR SAFETY TRAINING

34

Mishap Prevention, Investigation and Reporting

• Mishaps which result in damage to facilities and equipment, injury, occupational illnesses or death degrade operational readiness and increase operational cost.

• Prevention is everyone’s responsibility.

Page 35: SUPERVISOR SAFETY TRAINING

35

All Mishaps Require Investigation

• Severity of mishap determines the level at which it will be investigated

• Operational mishaps are divided into four classes

Page 36: SUPERVISOR SAFETY TRAINING

36

Class A Mishap The resulting total cost of reportable

material property damage is $1,000,000 or more; or an injury or occupational illness results in a fatality or permanent total disability. Class B Mishap

The resulting total cost of reportable material property damage is $200,000 or more, but less than $1,000,000; or an injury or occupational illness results in permanent partial disability; or three or more personnel are inpatient hospitalized.

Page 37: SUPERVISOR SAFETY TRAINING

37

Class C MishapThe resulting total cost of reportable material property damage is $20,000 or more, but less than $200,000; a non-fatal injury that causes any loss of time from work beyond the day or shift on which it occurred, or a non-fatal illness or disease that causes loss of time from work or disability at any time (lost time case).

Class D MishapThe resulting total cost of reportable material property damage is less than $20,000, or non-fatal injury (no lost time or first aid case) that does not meet the criteria of a Class C mishap.

Page 38: SUPERVISOR SAFETY TRAINING

38

OPERATIONALRISK MANAGEMENT

OPERATIONALRISK MANAGEMENT

Page 39: SUPERVISOR SAFETY TRAINING

39

“ “ Commanders have a fundamental Commanders have a fundamental responsibility to safeguard highly valued responsibility to safeguard highly valued personnel and material resources, and to personnel and material resources, and to accept only the minimal level of risk necessary accept only the minimal level of risk necessary to accomplish an assigned mission.”to accomplish an assigned mission.”

From OPNAVINST 3500.39/MCO 3500.27(Operational Risk Management)signed on 3 April 1997.

Page 40: SUPERVISOR SAFETY TRAINING

40

he process of dealing with risk

associated with military operations,

which includes risk assessment, risk

decision making, and implementation of

effective risk controls.

OOperationalperationalRRisk isk MManagementanagement

T

Page 41: SUPERVISOR SAFETY TRAINING

41

OrganizationalOrganizationalCultureCulture

“The way we do things here”

Drives Key Decisions

Page 42: SUPERVISOR SAFETY TRAINING

42

“Risk Management... We already do it!”

When you discuss ORMORM with personnel in the Navy, this is what you often hear...

Page 43: SUPERVISOR SAFETY TRAINING

43

The unplanned result of a behavior that is likely a part of an organization’s culture.

Accident:Accident:Mish

ap

Mishap

Page 44: SUPERVISOR SAFETY TRAINING

““ChangeChange is the is the Mother of All Risks” Mother of All Risks”

If you detect a shift in:• The initial plan

• Environment• Equipment• Personnel

and evaluate the

ChangeChange!!!

Page 45: SUPERVISOR SAFETY TRAINING

45

The Navy has a number of operational mishaps, but...

Driving your car is probably the most dangerous thing that you do!!!!

Page 46: SUPERVISOR SAFETY TRAINING

46

Page 47: SUPERVISOR SAFETY TRAINING

6003N

Page 48: SUPERVISOR SAFETY TRAINING

387

245

150

79

40

36

24

23

16

12

Motor vehicle

Suicide

Natural

Crime

Drown

Exercise

Fall

Aviation

Gun

Alcohol

Top Ten Causes of Death

Navy & Marine Corps Enlisted, 5/1/94 –

2/12/97

34 Months34 Months

1,088 Deaths1,088 Deaths

3001

Page 49: SUPERVISOR SAFETY TRAINING

56

21

15

9

4

3

3

2

1

Aviation

Natural

Suicide

Motor vehicles

Exercise

Fall

Crime

Drowning

Guns

Top Ten Causes of Death

Navy & Marine Corps Officers, 5/1/94 –

2/12/97

34 Months34 Months

125 Deaths125 Deaths

3002A

Page 50: SUPERVISOR SAFETY TRAINING

50

Total =$3.53 B

The Cost of Navy MishapsFY 92-97

Per Year = $587.8MPer Month = $ 49.0MPer Week = $ 11.3MPer Day = $ 1.6MPer Hour = $ 67.3KPer Minute= $ 1.1KPer Second = $ 19.00

Aviation 84%

Afloat5%

Other11%

Page 51: SUPERVISOR SAFETY TRAINING

51

Implementing ORM in Your Command

• Provide basic ORM training to command personnel

• Incorporate identified hazards, assessments and controls into briefs, notices and written plans

• Conduct a thorough risk assessment for all new or complex evolutions

• Address ORM process in safety, training and lessons learned reports

Page 52: SUPERVISOR SAFETY TRAINING

52

ORMORM is a process…is a process…notnot a program! a program!

It must become an inherent way of doing business

Page 53: SUPERVISOR SAFETY TRAINING

53

1. Identify HazardsIdentify Hazards

2. Assess Hazards

3. Make Risk Decisions

4. Implement Controls

5. Supervise

Page 54: SUPERVISOR SAFETY TRAINING

54

Gather the right experience together.“Experience is the name everyone gives to their

mistakes.” (Oscar Wilde, 1892)

Analyze manageable pieces of the event.Remember the definition of a hazard - condition with the potential to cause personal injury or death, property damage or mission degradation.

Identify HazardsIdentify Hazards

OOperationalperationalRRisk isk MManagementanagement

11

Page 55: SUPERVISOR SAFETY TRAINING

55

1. Identify Hazards

2. Assess Hazards2. Assess Hazards

3. Make Risk Decisions3. Make Risk Decisions

4. Implement Controls

5. Supervise

Page 56: SUPERVISOR SAFETY TRAINING

56

The worst credible consequence which can occur as a result

of a hazard.

Severity

Page 57: SUPERVISOR SAFETY TRAINING

57

The likelihood that a hazard will result in a mishap or loss.

Probability:

Page 58: SUPERVISOR SAFETY TRAINING

58

1 1 2 3

1 2 3 4

2 3 4 5

3 4 5 5

A B C D

I

II

III

IV

Page 59: SUPERVISOR SAFETY TRAINING

59

1. Identify Hazards

2. Assess Hazards

3. Make Risk Decisions

4. Implement Controls4. Implement Controls

5. Supervise

Page 60: SUPERVISOR SAFETY TRAINING

60

Engineering controls

Administrative controls

Personal protective equipment

Implement ControlsImplement Controls

OOperationalperationalRRisk isk MManagementanagement

44

Page 61: SUPERVISOR SAFETY TRAINING

61

1. Identify Hazards

2. Assess Hazards

3. Make Risk Decisions

4. Implement Controls

5. Supervise

Page 62: SUPERVISOR SAFETY TRAINING

62

SuperviseSupervise

OOperationalperationalRRisk isk MManagementanagement

55 Monitor for effectiveness of controls

Watch for changes

Page 63: SUPERVISOR SAFETY TRAINING

63

1. Manage by planning

2. Accept no unnecessary risk

3. Make risk decisions at the right level

4. Accept risk when benefits outweigh the cost

Page 64: SUPERVISOR SAFETY TRAINING

64

SET THE EXAMPLE

Page 65: SUPERVISOR SAFETY TRAINING

65

SET THE EXAMPLE

A Nun’s Story with Audrey Hepburn

Page 66: SUPERVISOR SAFETY TRAINING

66

Resource constraints New technology Complex evolutions Stress Feeling of “Invincibility”

Sources of Risk

Page 67: SUPERVISOR SAFETY TRAINING

67

Personal work ethic Environmental influences Human nature Speed, tempo of operation High energy levels

Sources of Risk(cont.)(cont.)

Page 68: SUPERVISOR SAFETY TRAINING

68

Leaders - Ask Yourself...

•Do I have employees with enough self-discipline to do their jobs to the standards I have set?

Page 69: SUPERVISOR SAFETY TRAINING

69

Leaders - Ask Yourself...•Do I have employees with enough self-discipline to do their jobs to the standards I have set?

•Does the command have leaders who are ready, willing, and able to enforce these standards?

Page 70: SUPERVISOR SAFETY TRAINING

70

Leaders - Ask Yourself...•Do I have employees with enough self-discipline to do their jobs to the standards I have set?

•Does the command have leaders who are ready, willing, and able to enforce these standards?

•Has our training given people the skills to meet these standards?

Page 71: SUPERVISOR SAFETY TRAINING

71

Leaders - Ask Yourself...•Do I have employees with enough self-discipline to do their jobs to the standards I have set?

•Does the command have leaders who are ready, willing, and able to enforce these standards?

•Has our training given people the skills to meet these standards?

•Are the standards clear and practical?

Page 72: SUPERVISOR SAFETY TRAINING

72

Leaders - Ask Yourself...•Do I have employees with enough self-discipline to do their jobs to the standards I have set?

•Does the command have leaders who are ready, willing, and able to enforce these standards?

•Has our training given people the skills to meet these standards?

•Are the standards clear and practical?

•Do you have the necessary support for doing our jobs, including equipment, maintenance, facilities and services?

Page 73: SUPERVISOR SAFETY TRAINING

73

Improved mission effectiveness

Reduction in mishaps

OOperationalperationalRRisk isk MManagementanagement

BenefitsBenefits

Page 74: SUPERVISOR SAFETY TRAINING

74

Hazardous Material Control and Management Program

Page 75: SUPERVISOR SAFETY TRAINING

75

Page 76: SUPERVISOR SAFETY TRAINING

76

Every item of HM being used in a work space must be on that work space’s Authorized Use List (AUL)

Each employee must know where the MSDS’s are kept.

All employees must receive training about Hazard Communication (Right to Know)

before they work with HM and annually thereafter.

Page 77: SUPERVISOR SAFETY TRAINING

77

Page 78: SUPERVISOR SAFETY TRAINING

78

*Before a new item of HM is introduced within a work space it must first be approved and added to the AUL. *CFAY Form 5100/17

*Each employee must be trained on each item of HM before being required to use that HM. The training must be documented.

*A Material Safety Data Sheet (MSDS) must be on hand for each item of HM used and available during all work shifts.

Page 79: SUPERVISOR SAFETY TRAINING

79

QUIZ TIME

Page 80: SUPERVISOR SAFETY TRAINING

80

Passing score is 80% or more. If the employee fails the test, please have him/her review the contents of training and retake a test until he/she passes the test.

Name: ________________________________ Command/Code: ____________________________ Job Title: __________________________________ Phone Number: ________________ e-Mail Address: _________________________________ 

QUIZQUIZ 1. Who is responsible for your subordinates’ safety? (Answer)_____________________________

2. Your safety program depends on your subordinates being actively involved.

a. True b. False

3. It is the Safety Office’s responsibility to ensure that necessary Personal Protective

Equipment (PPE) is used. a. True b. False

4. Who will train how to take care of PPE? (Answer)____________________________________

5. More accidents are attributed to unsafe conditions than to unsafe acts.

a. True b. False

6. Within how many days after assigned as a supervisor does supervisor have to receive the Supervisor Safety Training? (Answer)__________________________

7. How often do supervisors have to receive the Supervisor Safety Refresher Training?

(Answer)_______________________