Super High Energy Ni-MH battery system Nickel-Metal ... · Super High Energy Ni-MH battery system...
Transcript of Super High Energy Ni-MH battery system Nickel-Metal ... · Super High Energy Ni-MH battery system...
FeaturesBasic configuration : 24 V, 36 V battery systems including :
Super High Energy Ni-MH battery systemNickel-Metal HydrideMobility module
The Mobility module includes latest improvements achieved by Saft with cells, housing, connections and electronic devices for safety, cycle and calendar life, reliability and cost.
L
W
H
• Built-in BMS (Battery Manage-ment System) managing charge, discharge and state of charge based on proprietary algorithm.
• Anodised aluminium casing to withstand shocks and vibrations.
• LED display for fuel gauge and battery status.
• Communication and remote control possible through the BPCI® (Battery Protection and Communication Interface) bus.
• Robust main connector and specific connector for charge. Energy recovery (regenerative charge) during use is possible depending on the battery status.
• Auto-sleep mode and on/off key to protect the battery when unused or short-circuited.
• Designed for ease of parallel assembly.
• State-of-health indicator.• Discharge current up to 40 A
continuous.• 2 years/500 cycles smart
warranty.
Benefits• Ready for intensive use.• Plug-and-play design.• Autonomy on demand thanks to
plug-and-play parallel assembly.• Robust and easy connecting.• Remote on/off control HMI
(Human Machine Interface) possible.
• Protection against common mishandling (high temperature, short-circuit…).
• Electrical deactivation in sleep mode.
VH D VH FConfiguration 20S 30S 20S 30SNominal voltage (V) 24 36 24 36
Typical capacity at C/3 drain rate after9 15
full charge at 3A at + 20°C (Ah)
Minimum capacity at end of life (Ah) 6 10
Specific energy (Wh/kg) 57 58 62 64
Energy density (Wh/dm3) 103 112 124 135
Height (mm) H 170 228 231 320
Length (mm) L 185
Width (mm) W 81
Weight (kg) 4.9 6.5 6.5 9.6
Volume (dm3) 2.5 3.4 3.5 4.8
Operating temperature range for chargeand discharge (°C) - min / max
- 10 / + 40
Extended temperature range for discharge(°C) - min / max
- 20 / + 60
Transport and storage temperaturerange (°C) - min / max
+ 5 / + 25
95 % of capacity (h) 53
Balancing time to 100%of capacity typical use (h)
5
Balancing time to 100%of capacity after long storage (h)
48
Maximum peak current (A)- 0.1 s (0°C / + 20°C)
up to 120 / 150
Maximum peak current (A) - 1 s up to 80
Maximum peak current (A) - 10 s up to 60
Maximum discharge current (A) - 1 min up to 40
Maximum one shot full dischargecurrent (A) - continuous
up to 30 (starting at + 20°C)
Mobility module withElectrical characteristics
Operating conditions
Typical charge time
Maximum discharge current
Mechanical characteristics
Vol
tage
(V)
Vol
tage
(V)
Vol
tage
(V)
Vol
tage
(V)
• Compatible with a wide range of constant current power supplies (CCPS).
• Preventive maintenance thanks to state-of-health feature.
• Recyclability and respect for the environment.
Smart warranty• 2 years or 500 cycles (70%
depth of discharge) at + 20°C.• Integrated memory recording
operating and storage conditions.
• Computer-based software to access data.
Applications • Electric bicycles, scooters,
wheelchairs and other light electric vehicles.
• Caddies, robotics and other material handling devices.
• Professional applications.
Components • Neutrik 4-pin Speakon®
connector for discharge.• Neutrik 4-pin XLR connector for
charge and BPCI® communication.
• Charge fuse : 15 A ATO.• Discharge fuse : 40 A ATO. • Aluminium casing with ABS top
and bottom covers.
Options available• Waterproof casing (IP54).• Handle and mounting brackets
for integration.• Color anodization for aluminum
casing.• Serial communication kit for PC
access (with Saft software).
Recommendations • Recharge up to 6 months after
full charge.• Storage temperature :
+ 5 to + 25°C.• Do not immerse into water.• CCPS and accessories available
for system integration.
80 2 4 6 10 12 14 181616
18
20
22
24
26
28
30
Tem
pera
ture
(°C
)
20
25
30
35
40
45
16
18
20
22
24
26
28
30
Temperature °CVoltage (20 cells)
Time (hour)
Charge at 3 A at room temperature with Saftintegrated charge controller(example for a 20S VH F module)
30 A20 A10 A
+ 40°C+ 20°C0°C
+ 40°C+ 20°C0°C
Discharge at room temperature at different ratesafter charge with Saft integrated charge controller
(example for a 20 VH D 9500 XP)
Capacity (Ah)0 42 8631 75 9
Capacity (Ah)
Discharge at 20 A and different temperatures aftercharge with Saft integrated charge controller
(example for a 20S VH D 9500 XP)
0 42 8631 75 916
18
20
22
24
26
28
30
T° cut off
24
30
27
36
33
39
42
45
Discharge at 30 A and different temperatures aftercharge with Saft integrated charge controller
(example for a 30S VH D 9500 XP)
Capacity (Ah)0 42 8631 75 9
SaftRechargeable Battery Systems12, rue Sadi Carnot93170 Bagnolet - FranceTel.: +33 (0)1 49 93 19 18Fax: +33 (0)1 49 93 19 68Email: [email protected]
www.saftbatteries.com
DOC N°11123-2-1109Data in this document are subject to change without notice and become contractual only after written confirmation by Saft.Photo credits: SaftPublished by the Communication DepartmentSaft S.A. Stock capital 31.944.000 RCS Bobigny B 383 703 873 Designed by Soyouzgraphic