GUARD 8000 rpm D28474W 6000 rpm D28494N 6000 rpm D28494S 5000 rpm
SUPER FAST SYSTEM. · SUPER FAST SYSTEM. Only a small amount needed Cut 1500 rpm - light pressure...
Transcript of SUPER FAST SYSTEM. · SUPER FAST SYSTEM. Only a small amount needed Cut 1500 rpm - light pressure...
![Page 1: SUPER FAST SYSTEM. · SUPER FAST SYSTEM. Only a small amount needed Cut 1500 rpm - light pressure End 900 rpm - no pressure • Eliminates P1500 sanding marks • Removes the need](https://reader034.fdocuments.in/reader034/viewer/2022050117/5f4dd7dab56352103952f469/html5/thumbnails/1.jpg)
SUPER FASTSYSTEM.
Only a smallamountneeded
Cut 1500 rpm - light pressureEnd 900 rpm- no pressure
• Eliminates P1500 sanding marks• Removes the need for P3000• Prepares for second stage polishing
• Eliminates holograms• Removes swirl marks• Gives an excellent gloss �nish
• Ideal for darker colours a�er using G360 Super Fast Compound
• Eliminates minor swirl marks• Leaves an enhanced deep gloss �nish
+44 (0) 1920 465 041 | [email protected] | www.farecla.comfareclaproductsltd
Remove P1500 sanding marksRemove process marks -swirls and holograms
Enhance depth of gloss
Mark defect witha G Plus AutopenAP-5YW (yellow)
P3000
P1500 Only a smallamountneeded
900 - 1300rpm
Wipe cleanFC-3
Only a smallamountneeded
800 - 1100rpm
Wipe cleanFC-3
SURFACE FINISHINGSPECIALISTS
NOT REQUIRED
NOTE: Correct machine speed, minimal product and applying no pressure are the keysto achieving optimum results. Clean the G Mop Super High Cut Pad regularly with a G Plus Spurring Brush 1090005
G360 Super Fast Compound.SFC101 (1kg)
G Mop SuperHigh Cut Pad.GMC650 (6” / 150mm)
G360 Super Fast Compound.SFC101 (1kg)
G Mop Fexlible YellowCompounding Foam. GMC624 (6” / 150mm)
G360 Super Fast Finish.SFF101 (1 ltr)
G Mop Flexible BlackFinishing Foam.GMF624 (6” / 150mm)
For best results and longer pad life always use a G Mop Flexible Back Plate,GMB146 (14mm thread), GMB586 (5/8” thread) or GMB166 (16mm thread).
#FARECLAG360
REMOVEDEFECT
IDENTIFYDEFECT
Step 1: HIGH CUT
Step 2: MEDIUM CUT
Optional Step 3: FINE CUT
LIT1
997
(V3
01-2
020)