Super Clamps-general Clamp Industries Inc
-
Upload
tagor-sianipar -
Category
Documents
-
view
10 -
download
0
description
Transcript of Super Clamps-general Clamp Industries Inc
GENERAL CLAMP INDUSTRIES INC.A Division of United States Crane, Inc.
Product Catalog
IntroductionLev Lock • Universal Superclamp • Pipe Lifting Clamps
Swivel Jaw Adjustable Girder ClampsAutolock Runway Beam Trolleys with Anti-Drop PlatesGeared Runway Beam Trolleys with Anti-Drop Plates
Adjustable Runway Beam Trolleys with Anti-Drop PlatesAdjustable Angle Section Clamp • Fixed Jaw Adjustable Girder Clamps
Adjustable Universal Rail Lifting Clamps • Permanently Fixed Adjustable Girder ClampsAdjustable Runway Beam Trolleys • Fixed Jaw Adjustable Girder Dog
Adjustable Double Ended Monorail Construction Clamps • Adjustable Pulley ClampsHorizontal Plate Lifting Clamps
Introduction
Safety is Everybody's Business
Lev Lock
Specifications General Description
Universal Superclamp
Specifications General Description
Pipe Lifting Clamps
Specifications General Description
Swivel Jaw Adjustable Girder Clamps
Specifications General Description
Autolock Runway Beam Trolleys with Anti-Drop Plates
Specifications General Description
Geared Runway Beam Trolleys with Anti-Drop Plates
Specifications General Description
Adjustable Runway Beam Trolleys with Anti-Drop Plates
Specifications General Description
Adjustable Angle Section Clamp
Specifications General Description
Fixed Jaw Adjustable Girder Clamps
Specifications General Description
Adjustable Universal Rail Lifting Clamps
Specifications General Description
Permanently Fixed Adjustable Girder Clamps
Specifications General Description
Adjustable Runway Beam Trolleys
Specifications General Description
Fixed Jaw Adjustable Girder Dog
Specifications General Description
Adjustable Double Ended Monorail Construction Clamps
Specifications General Description
Adjustable Pulley Clamps
Specifications General Description
Horizontal Plate Lifting Clamps
Specifications General Description
SUPERCLAMP
IntroductionSafety is Everybody's Business
Our contribution to SAFETY is in securing the QUALITY and RELIABILITY of our 'SUPERCLAMP' products, which are used in Mining, On and Off-Shore Mineral Exploration, General Maintenance, and the Construction Industries.
Each 'SUPERCLAMP' product is proof tested to three times the safe working load. Tests to destruction ensuring a 5-1 factor of safety are employed throughout the design, development, and manufacturing process of the products.
Our worldwide distribution network will provide active and consultative support to assist in the selection of safety equipment to suit your lifting applications.
Should our standard range of 'SUPERCLAMP' products not fulfill your immediate requirements, then please contact your nearest authorized 'SUPERCLAMP' supplier who will gladly quote for any special applications you may have.
Yours sincerely,
UNITED STATES CRANE, INC.
SUPERCLAMP
LEV-LOCKSEMI-AUTOMATIC CHAIN SLING LOAD POSITIONER
ModelNo.
S.W.L.4/1
F.O.S.
S.W.L.5/1
F.O.S.A B
Max. H.T.HookSize
APPROX.WEIGHT
INC. CHAIN
TONS TONS Ins mm Ins mm TONS Lbs Kg
L2 2 1.6 10 254 6.5 165 3 44.3 20.1
L3 3.2 2.56 11 280 8 203 5 60.06 27.3
L5 5.4 4.32 14.5 370 10 254 10 105.6 48.0
L8 8 6.5 18.5 470 12 305 15 208.4 94.5
L12 12.5 10 23.5 597 15 381 20 340.56 154.8
General Description
The LEV-LOCK does not rely on friction but incorporates a positive automatic mechanical locking/release mechanism. The unit takes only seconds to attach to the crane hook, thus minimizing expensive load and lift procedures.
The center of gravity of an out-of-balance load is determined by the crane operator moving the unit along the chain to the desired point. The initial lift results in the automatic locking of the unit which ensures the load is lifted in a level plane.
Alternatively, the units are capable of lifting loads at a predetermined angle or can be used as an adjustable anchor point when fixed between two overhead beams or structures.
The present range includes: 2T, 3T, 5T, 8T, and 12T SWL units. This product is now in stock and ready to be shipped.
Positions out of balance loads in a horizontal plane at an angle. Fail safe units up to 12 tons safe working loads. Tested to twice the safe working load. Self-lubricating - positive lock. Simple 'Hang-On' units. Site erection at an angle. Can be used with lifting beam. Eliminates C of G calculations. Allows fixing hooks to exceed all OSHA Federal and State Regulations.
SUPERCLAMP
UNIVERSAL SUPERCLAMP
ModelSWL Adjustment
To AccomodateBeam Flange
ThicknessHead Room
MaxHook Size
Max WebThickness
AverageWeight
Lbs kgInch
min-maxmm
min-maxinch mm Inch mm Inch mm Inch mm Lbs kg
USC 1 2240 1016 0" - 7 1/2" 0 - 190 1" 25.4 3 1/2" 89 2 1/4" 57 1 1/4" 32 15.8 7.2
USC 2 4480 2032 0" - 7 1/2" 0 - 190 1" 25.4 3 1/2" 89 2 1/4" 57 1 1/4" 32 17.6 8.0
USC 3 8960 4064 0" - 7 1/2" 0 - 190 1" 25.4 4" 101 2 1/4" 70 1 1/4" 32 27.2 12.4
USC 4 8960 4064 0" - 12" 0 - 305 1" 25.4 4" 101 2 1/4" 70 1 1/2" 38 29.7 13.5
USC 5 13440 6096 0" - 12" 0 - 305 1 3/4" 45 5" 126 3" 75 1 3/4" 45 35.2 16.0
General Description
The Universal "SUPERCLAMP" has been designed not only for vertical use, but also for side load applications where conventional clamps are not suitable. The USC is truly versatile in application and can be used for lifting, pulling or as an anchor point.
SUPERCLAMP
Pipe Lifting Clamps
MODEL
SWLat 0° Vertical
Adjustable to FitOutside Diameter
Inside ShackleCrown to Spacer
Inside ShackleWidth
AverageWeight
Lbs kgInch
min-maxmm
min-maxinch mm inch mm Lbs kg
P1 2240 1016 2 1/2" - 4 1/2" 63 - 115 3 1/4" 82 2 7/8" 73 15.0 6.8
P2 3360 1524 4" - 7" 101 - 178 3 1/4" 82 2 7/8" 73 31.0 14.1
P3 4480 2032 5" - 9" 127 - 228 3 1/4" 82 2 7/8" 73 41.0 18.6
P4 6720 3048 7" - 11" 178 - 279 5" 127 3 3/8" 92 70.0 31.9
P5 6720 3048 8" - 13" 203 - 330 5" 127 3 3/8" 92 80.0 36.4
P6 6720 3048 9" - 15" 228 - 381 5" 127 3 3/8" 92 76.3 34.5
P7 6720 3048 10" - 17" 254 - 432 5" 127 3 3/8" 92 110.0 50.0
P8 8960 4064 12" - 19" 305 - 482 5" 127 3 3/8" 92 140.0 63.6
P9 8960 4064 16" - 24" 406 - 610 5" 127 3 3/8" 92 169.0 77.0
General Description
"SUPERCLAMP" Pipe Lifting Clamps are designed for efficient and easy handling of cylindrical objects such as pipes or bars. The clamp is easily applied to cylindrical objects.
SUPERCLAMP
Swivel Jaw AdjustableGirder Clamps
MODEL
SWLat 0° Vertical
Jaw Grip Adjustment Jaw AperatureInside Shackle
Crown to SpacerAverageWeight
Lbs kgInch
min-maxmm
min-maxInch mm inch mm Lbs kg
S5 6720 3048 3 1/2" - 12" 80 - 315 1" 26 3 1/4" 95 22.0 10.0
S5A 6720 3048 3 1/2" - 12" 80 - 315 1" 26 4 1/8" 105 30.4 13.8
S6 11200 5080 3 1/2" - 12" 80 - 315 1" 26 4 1/8" 105 30.4 13.8
S6A 11200 5080 3 1/2" - 12" 80 - 315 1" 26 4 1/8" 105 33.5 15.2
S11 22400 10160 3 1/2" - 12" 80 - 315 1" 26 5 1/8" 130 45.4 20.8
General Description
Swivel Jaw Adjustable Girder Clamps incorporate the additional benefit of horizontal jaw adjustment. This enables the full length and maximum width of the swivel jaw to anchor evenly on a considerable surface area of the beam flange. Additional tools or width adjusting components are not required.
SUPERCLAMP
Autolock Runway BeamTrolleys with Anti-Drop Plates
MODEL
SWLat 0° Vertical
Width Adj.
To Accommodate Beam
Flange Thickness max
To Accommodate
Flange Web max
Inside ShackleTo Trolley
Body
AverageWeight
Lbs kginchmin-max
mmmin-max
inch mm inch mm inch mm Lbs kg
A-1 6720 3048 3" - 8" 75 - 203 1-1/8" 28 1-3/16" 30 5 1/4" 135 38.0 17.2
A-2 13440 6096 4" - 12"100 - 315
1-3/16" 30 1-9/16" 40 5 1/8" 130 79.4 36.0
A-3 22400 10160 4" - 12"100 - 315
1-3/16" 30 1-9/16" 40 5 1/2" 140 90.2 40.9
General Description
A self locking "SUPERCLAMP" Unit with Anti-Drop Plates designed for maximum speed of application, minimum maintenance requirements and maximum safety. The practical and versatile design provides the user with a high quality product, tailored to the needs of those persons who require the use of securing attachments.
SUPERCLAMP
Geared Runway Beam Trolleyswith Anti-Drop Plates
MODEL
SWLat 0° Vertical
Width AdjustmentTo Accomodate BeamFlange Thickness max
Inside ShackleCrown to Spacer
AverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm Lbs kg
GBT 1 6720 3048 3" - 8" 75 - 203 1 1/8" 28 4" 100 70.5 32.0
GBT 2 13440 6096 4" - 12" 100 - 315 1 1/4" 31 4" 100 122.3 55.5
GBT 3 22400 10150 4" - 12" 100 - 315 1 1/2" 38 5 1/8" 130 168.7 76.5
GBT 4 33600 15270 8" - 18" 203 - 457 3" 76 8" 205 300.0 136.0
GBT 5 44800 20363 8" - 18" 203 - 457 3" 76 8 1/4" 225 358.0 163.0
General Description
"SUPERCLAMP" Geared Runway Beam Trolleys have taken requirements of the user into consideration. Designed and manufactured with 'Anti-Drop Plates,' this product range assures ease of application in use, maximum safety and hold, and low maintenance requirements. As with all "SUPERCLAMP" products, the quality is of the highest standard to comply with user requirements.
SUPERCLAMP
Adjustable Runway Beam Trolleyswith Anti-Drop Plates
MODEL
SWLat 0° Vertical
Width AdjustmentTo Accommodate BeamFlange Thickness max
Inside ShackleCrown to Spacer
AverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm Lbs kg
BA 1 2240 1016 2 1/2" - 8" 63 - 203 1" 26 3 1/2" 90 14.3 6.5
BA 2 3360 1524 3" - 8" 75 - 203 1" 26 3 1/2" 90 15.9 7.2
BA 3 4480 2032 3" - 8" 75 - 203 1" 26 3 1/2" 90 15.9 7.2
General Description
This range of lightweight handpush "SUPERCLAMP" Runway Beam Trolleys offers easy to use mobile securing attachments for load and lifting requirements. Developed for lighter industrial application, this product range is completely recommended for maintenance departments and must be an integrated part of every engineers tool kit. The left and right hand threaded adjusting bar only requires turning so as to ensure appropriate adaptation to a beam width, and the trolley is ready for use. No additional tools or width adjusting components required. Fitted with a width adjustment locking mechanism and Wheelguarding Anti-Drop Plates, this range of products could well be one of the great innovations to secure Safety and Health in the home workshop and at work.
SUPERCLAMP
Adjustable Angle Section Clamp
MODEL
SWLat 0° Vertical
To Fit Angle Sections Jaw ApertureInside Shackle
Crown to SpacerInside Shackle
WidthAverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm inch mm Lbs kg
AC 1 1120 508 1 1/2" - 4" 38 - 101 3/5" 15 3 1/4" 82 2 7/8" 73 9.9 4.5
AC 2 2240 1016 1 1/2" - 4" 38 - 101 3/5" 15 3 1/4" 82 2 7/8" 73 12.1 5.5
AC 3 3360 1524 - 6" 50 - 152 3/4" 19 3 1/4" 82 3 1/2" 89 25.3 11.5
AC 4 6720 3048 - 6" 101 - 203 1" 25.4 5" 127 3 5/8" 92 47.5 21.5
General Description
This "SUPERCLAMP" product serves as an anchor or lifting point when attached to an overhead steel angle section approved for lifting applications. The 'V-Block' Clamping Jaw ensures that the clamp is securely fixed to the Angle Section when adequately tightened. "SUPERCLAMP" Angle Section Clamps are designed for safety and versatility - each model being suited to accommodate a wide range of steel angle sections. No tools required as the Adjusting Mechanism is an integral part of the design features and incorporates an Adjusting Bar with handle.
SUPERCLAMP
Fixed Jaw AdjustableGirder Clamps
MODEL
SWLat 0° Vertical
Jaw Grip Adjustment Jaw ApertureInside Shackle
Crown to SpacerAverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm Lbs kg
S1 4480 2032 3" - 7 1/2" 75 - 190 7/8" 22 3-3/4" 95 8.8 4.0
S2 6720 3048 3" - 7 1/2" 75 - 190 7/8" 22 3-3/4" 95 11.3 5.1
S2A 6720 3048 3" - 7 1/2" 75 - 190 7/8" 22 3-3/4" 95 16.3 7.4
S3 8960 4064 6" - 10" 150 - 254 7/8" 22 3-9/10" 100 22.9 10.4
S3X 11200 5080 3" - 7 1/2" 75 - 190 7/8" 22 4-1/8" 105 19.9 9.0
S3A 11200 5080 6" - 12" 150 - 305 1 5/8" 42 4-1/8" 105 32.8 14.9
S4S 13440 6095 8" - 18" 200 - 457 1 5/8" 42 4-1/8" 105 41.5 18.8
S4A 22400 10160 8" - 18" 200 - 457 1 5/8" 42 5-1/8" 130 60.2 27.3
S12 33601 15241 8" - 18" 200 - 457 2" 50 5-7/8" 150 118.4 53.8
S14 33601 15241 16" - 24" 406 - 610 2 1/2" 63 5-7/8" 150 126.1 57.1
General Description
There Fixed Jaw Adjustable Girder Clamps are truly versatile in application and may be used for lifting, pulling or as an anchor point. Designed specifically to provide maximum JAW GRIP ADJUSTMENT. These products are engineered for practical use where mobility is essential. The clamps are easily applied and do not require additional tools or width adjusting components such as spacing washers.
SUPERCLAMP
Adjustable UniversalRail Lifting Clamps
MODELSWL
at 0° Vertical Jaw Grip AdjustmentInside Shackle
Crown to SpacerAverage Weight
Lbs kg inch mm Lbs kg
R1 6720 3048 All Standard RailSections to 113 A
3 3/4" 95 13.2 6.0
R2 11200 5080 4 1/8" 105 17.0 7.7
General Description
Developed for standard Rail Sections. The "SUPERCLAMP" Universal Rail Clamp is adjustable, and provides a reliable and secure grip on the rail when tightened. Its lightweight, versatile adjustability and low maintenance requirements makes this "SUPERCLAMP" product a highly recommendable unit for all engaged in Rail Construction, Rail Maintenance and Rail Manufacture.
FOR BRIDGE TYPE RAILS, STANDARD S2A FIXED JAW"SUPERCLAMP" GIRDERCLAMP FITS ALL SECTIONS
SUPERCLAMP
Permanently FixedAdjustable Girder Clamps
MODEL
SWLat 0° Vertical
Jaw Grip Adjustment Jaw ApertureLifting Eye
Vertical AperatureAverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm Lbs mm
PFC1 2240 1016 3" - 7 1/2" 75 - 190 7/8" 22 1 1/2" 40 4.6 2.1
PFC2 4480 2032 3" - 7 1/2" 75 - 190 7/8" 22 1 1/2" 40 5.5 2.8
PFC3 6720 3048 3" - 7 1/2" 75 - 190 7/8" 22 1 1/2" 40 8.5 3.8
General Description
Permanently Fixed Adjustable "SUPERCLAMP" Girder Clamps (PFC) are designed for light industrial applications, particularly where a permanent overhead anchor point is required. These high-strength, inexpensive, light weight clamps are excellent for application in small garages and hobbyist workshops.
SUPERCLAMP
Adjustable Runway Beam Trolleys
MODEL
SWLat 0° Vertical
Width AdjustmentTo Accommodate BeamFlange Thickness (max)
Inside ShackleCrown to Spacer
AverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm Lbs kg
B1 6720 3048 3" - 8" 75 - 203 1 1/8" 28 4" 100 60.6 27.5
B2 13440 6096 4" - 12" 100 - 315 1 1/4" 31 4" 100 107.2 48.5
B3 22400 10160 4" - 12" 100 - 315 1 1/2" 38 5 1/8" 130 158.7 72.0
General Description
"SUPERCLAMP" Adjustable Runway Beam Trolleys are of acknowledged and experienced design. The unique quality features of this new range of manual travelling gear are the Wheelguarding Anti-drop Plates, which are incorporated into the practical design of these transferable and mobile securing attachments. To complement this range, reference is made to "SUPERCLAMP" Geared Runway Beam Trolleys which allow additional ease of load conveyance.
SUPERCLAMP
Fixed Jaw Adjustable Girder Dog
MODEL
SWLat 0° Vertical
Jaw Grip Adjustment
Jaw ApertureInside Shackle
Crown to SpacerInside Shackle
WeightAverage
Lbs kginch
min-maxmm
min-maxinch mm inch mm inch mm Lbs kg
S15 44800 20320 8" - 18" 200 - 457 2" 51 8-1/4" 210 4 1/2" 114 139.1 53.2
S16 44800 20320 16" - 24" 406 - 610 2 1/2" 63 8-1/4" 210 4 1/2" 114 175.2 79.5
S17 56000 25400 8" - 18" 200 - 457 2" 51 8-1/8" 203 5" 127 156.6 71.2
S18 56000 25400 16" - 24" 406 - 610 2 1/2" 63 8-1/8" 203 5" 127 199.0 90.5
S19 67200 30480 8" - 18" 200 - 457 2 1/2" 63 8-1/8" 203 5" 127 207.6 94.4
S20 67200 30480 16" - 24" 406 - 610 3' 76 8-1/8" 203 5" 127 238.8 108.5
General Description
"SUPERCLAMP" GIRDERDOGS incorporate all of the reputedly excellent and reliable design features for which our products are known. The GIRDERDOGS design is enhanced by a well balanced distribution of sideplates, ensuring maximum grip and hold over an adequate length of Girder or Beam Flange. They are safe in use, and once in position, are easily applied to a steel beam. No additional width adjusting tools or components required.
SUPERCLAMP
Adjustable Double Ended MonorailConstruction Clamps
MODELSWL
at 0° VerticalJaw Grip Adjustment Jaw Aperture
Max. Ht.Adjustment
AverageWeight
Lbs kg inch mm inch mm inch mm Lbs kg
S7 6720 3048 3" - 7 1/2" 75 - 190 7/8" 22 - - 16.7 7.6
S7A 6720 3048 3" - 7 1/2" 75 - 190 7/8" 22 1 1/4" 32 17.2 7.8
S8 8960 4064 6" - 10" 150 - 254 1 5/8" 42 - - 33.6 15.3
S8A 11200 5080 6" - 10" 150 - 254 1 5/8" 42 1 1/4" 32 40.7 18.5
General Description
These Monorail Construction Clamps are designed to enable Speedy Erection of permanent or temporary Overhead Conveying Systems where existing steel girders are of an adequately balanced horizontal level. Both clamps are fully adjustable by operating the left and right hand threaded adjusting bars incoporated into the unit. The designed-in Stationary Height Stabilizer Block ensures a rigid construction of the Unit. Additional tools or width adjusting components are not required to apply the unit onto existing steel girders.
SUPERCLAMP
Adjustable Pulley Clamps
MODEL
SWLat 0° Vertical
Jaw Grip Adjustment
Jaw ApertureSheave
Diameter
Sheave Groove for
Wire Rope to max
AverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm inch mm Lbs kg
PC1 3360 1524 3" - 7 1/2" 75 - 190 7/8" 22 8" 203 1/2" 13.0 25.6 11.6
General Description
"SUPERCLAMP" Adjustable Pulley Clamps (PC) are of practical design and find their day-to-day applications where lifting and pulling machines are used. Handling loads is easier and safer since the "SUPERCLAMP" Adjustable Pulley Clamp eliminates the use of diverse components generally required to secure single sheave pulleys. This single sheave unit is adapted to the width of a girder by adjusting the left and right hand threaded adjusting bar. "SUPERCLAMP" Pulley Clamps (PC) are highly versatile and an ideal product for permanent or transferable applications.
SUPERCLAMP
Horizontal Plate Lifting Clamps
MODEL
SWLin pairs
Jaw AdjustableInside Shackle
Crown to SpacerInside Shackle
WidthAverageWeight
Lbs kginch
min-maxmm
min-maxinch mm inch mm Lbs kg
HPC-1 3360 1524 0" - 1 1/2" 0 - 38 3" 76 3" 76 11.5 5.2
HPC-2 4480 2032 0" - 2" 0 - 50 3" 76 3" 76 14.5 6.5
HPC-3 6720 3048 0" - 3" 0 - 76 4 1/4" 108 3 1/4" 82 31.0 14.0
HPC-4 8960 4064 0" - 4" 0 - 101 4 1/4" 108 3 1/4" 82 45.8 20.7
General Description
Horizontal Plate Lifting Clamps are designed to be used as Orignal "SUPERCLAMP" Pairs only. The rigidly competent designs incorporate an easily replaceable Toothed Cam Toe which ensures maximum grip and hold. The standard Jaw Apertures allow for a wide range of mild steel plate thickness to be horizontally lifted. Parts are easily replaceable. "SUPERCLAMP" Horizontal Plate Lifting Clamps are equipped with a Lifting Shackle, and easily replaceable components.