Summary of LOWFS Meeting
Transcript of Summary of LOWFS Meeting
Low-order Wave-front Sensing and Control, and Point-spread-function Calibration, for
Direct Imaging of Exoplanets
(short title : LOWFSC & PSF for Exoplanets)
Olivier Guyon (University of Arizona)Wesley Traub (JPL)
Background
2-day meeting held at JPL, Feb 26 & 27
Originally aimed at reporting progress and discussing concepts/techniques related to NASA Space Technology Research Opportunities-Early Stage Innovations (ESI) grant:“Wavefront control for high performance coronagraphy on segmented and centrally obscured telescopes” (PI: Guyon)
Meeting also included a wider discussion on control and calibration of low-order aberration and PSF calibration for NASA mission (AFTA, Exo-C and beyond)
Meeting website:http://exep.jpl.nasa.gov/lowfsc/
Presentations are available on the website
Outline (roughly follows workshop schedule)
Relevance to Exoplanets Direct Imaging
Coronagraphs sensitivity to low-order aberrations– Full apertures– Segmented apertures
Low order wavefront sensing
Control algorithms
AFTA-WFIRST
Lab testbeds & Ground-based systems
PSF calibration & reconstruction
Relevance to exoplanet direct imaging
← Simulated image of an exoplanet near the coronagraphs's IWA in the absence of low order aberrations
[1] Low-order aberrations will add light in the search region of the coronagraph, and create an uneven ring of light around the focal plane mask (from IWA to IWA+angular resolution)→ poorer raw contrast→ confusion between exoplanet(s) and stellar leakage
[2] Low-order aberrations (pointing, focus) are most easily excited in the optical system:Telescope pointing jitter induced by reaction wheelsRidig body motions of optics induced by thermal effects and vibrations
[3] Low-order aberrations are mostly restricting the coronagraph's IWA, which is key to mission science return
Low-IWA coronagraphs are the most sensitive to low-order aberrations
→ Control and calibration (PSF subtraction) of low-order aberrations is key to mission success
Relevance to exoplanet direct imaging
Tele
scop
e di
ffrac
tion
limit
x co
rona
grap
h IW
A
Sensitivity, wavefront stability
PSF calibration
LO aberrations
Coronagraph sensitivity to low-order aberrations (Figures from J. Krists' presentation)
● Smaller IWA coronagraphs tend to be more sensitive (there are fundamental reasons for that)
● Coronagraphs can, to some extent, be designed to mitigate LO aberration sensitivity● There exists a well defined fundamental limit defining how sensitive coronagraphs systems
have to be as a function of contrast and IWA (R. Belikov's presentation)
[Presentations: Krist, Shaklan, Belikov, Guyon, Traub]
Fo
cal
pla
ne
mas
k ra
diu
s a
[λ/D
]
Output central obstruction
Log (peak contrast outside 1.5 λ/D)
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0.0
0.0
5
0.2
5
0.3
0
0.3
9
0.3
5
0.2
0
0.1
5
0.1
0
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0.0
0.0
5
0.2
5
0.3
0
0.3
9
0.3
5
0.2
0
0.1
5
0.1
0
Coronagraph design can mitigate sensitivity to low-order aberrationsExample: Centrally obscured pupil PIAACMC design optimization, 2% l/D disk
~ two orders of magnitude contrast difference between badly tuned PIAACMC and tuned PIAACMCFor 0.3 output central obstruction, IWA = 1.4 design is much better than IWA = 1.8 l/D design, even when working at ~3 l/D
Segmented abertures (ESI effort, PI: Guyon)Future large space telescopes, able to take spectra of habitable planets, will likely be segmented and centrally obscured.Coronagraph solutions exist for such apertures.
Segment motion / cophasing is significant challenge: segments would need to be held / calibrated at pm level for 1e10 contrast
Number of segments
Cophasing error [rad]
Important scaling rules:
More segments = relaxed requirement if motions are uncorrelated
But, stability timescale is identical
[Presentation: Guyon]
10
PIAACMC : example coronagraph for segmented
aperture
Low Order Wavefront SensingApproach: Use startlight that the coronagraph rejects to measure pointing errors and other low order modes: direct imaging of the light spot, or phase constrast reveals low-order aberrations
• Opaque focal plane mask: use light reflected by the focal plane mask• Phase mask: use light reflected by the Lyot stop
[Presentations: Guyon, Traub, Kern, Trauger, Lozi, Miller, Shi, Wallace]
Control algorithmsTuning control loop to disturbances is essential for high performance control of low-order modes
Vibrations can be efficiently removed
[Presentations: Poyneer (overview), Lozi (LQG practical guide)]
Example: GPI testing in lab demonstrates ability to notch out vibration frequencies
Example performance on lab bench (Lozi)Input disturbance: 18nmStandard integrator control: 7.9nmLinear Quadratic Gaussian / Kalman filter: 0.77nm
AFTA-WFIRST : Thermal disturbances are slow, and relatively easy to control
[Presentations: Kuan & Content (thermal), Content (vibration/jitter), Shi/Wallace (LOWFS)]
AFTA-WFIRST : Vibrations induced by reaction wheels require fast LOWFS / correction
[Presentations: Kuan & Content (thermal), Content (vibration/jitter), Shi/Wallace (LOWFS)]
Controlling vibrations > ~50Hz is challeniging with LOWFS
Ongoing modeling suggests this is an issue that will affect coronagraph performanceCan be addressed by LOWFS optimization, control algorithm and PSF calibration
Integrated modeling of LOWFS under way (Shi/Wallace)
Testbeds, systems
[Presentations: Lozi, Kern, Trauger, Bendek, Miller, Jovanovic, Singh, Macintosh, Poyneer, Vasisht]
Sensing and control of low-order aberrations for high contrasting imaging developped and demonstrated on multiple testbeds and systems:
Lab:JPL HCIT LOWFS on PIAA coronagraphNASA Ames LOWFS (EXCEDE, AFTA-FIRST)UofA (for segmented and centrally obscured systems)
Ground:LOWFS on Subaru systemLow order control on GPILow order control on P1640
Ames testbed: ~2e-3 l/D closed loop control
[Presentation: Lozi & Bendek]
HCIT system with PIAA
[Presentation: Kern]
90 e-3 l/D disturbance→ 1.1 e-3 l/D
Subaru LOWFS System (Light reflected by Lyot stop – demonstrated with Vortex, 4QPM, PIAA)
[Presentation: Jovanovic & Singh]
On-sky LOWFS control of TTFResidual <mas
PALM3000 / P1640 system
[Presentation: Vasisht]
TT quad cell sensor + LOWFS (to dial out fixed low order aberrations) + high order sensor
PSF calibration
[Presentations: Soumer, Males, Pueyo]
This is a very large unknown in link between instrument design and science return.
Both ground-based and space (HST) systems have demonstrated the ability to perform PSF subtraction at the sub-% levelCurrently using passive calibration (database of PSFs): ADI, LOCI
Active speckle control in dark field can be quite different problem. Active control may make PSF databases less relevant, but adds precious telemetry (speckle modulation)
More study needed to understand how well PSF can be calibrated on future space-based high contrast imaging systems
Experience from ground and HST will be helpful, but holds little predictive power at present.
HST experienceHR8799 planets (imaged first from ground based telescopes) recovered in 1998 HST imagesPSF calibration tools and experienced developed after years of HST experience
Ground experience : detection limit ~100x below raw contrast level thanks to
post-processing
Skemer et al 2012 First CCD image of Beta Pic B
23
PSF calibration improved ~10x using LOWFS telemetry (Vogt et al. 2011)
Co-added science image Standard PSF subtraction MMA
Using telemetry from LOWFS and speckle control can greatly improve PSF calibration
24
Conclusions
Low-order aberrations pose a serious challenge to high contrast imaging
It is important to MEASURE low-order aberrations during observations:- measurement can drive a control loop- measurement will be used for PSF calibration, possibly in ways we
do not yet understand
Thanks to a combination of disturbance modeling, LOWFS design/optimization, and PSF calibration modeling, we are now, for the first time, becoming able to PREDICT the detection limit for a future space telescope
Experience from HST and ground-based system will be precious: while working at different contrast levels, the fundamental challenges and solutions are similar.
Next workshop to be announced soon (late 2014)