SUE 3000High Speed Transfer DeviceBrochure

Uninterrupted power supply

As a long-established supplier of High Speed Transfer Devices, with more than 2000 systems and devices already supplied world-wide, ABB can rely on a unique know-how in this area of specialization.

The SUE 3000 High Speed Transfer Device guarantees an optimum safeguarding of energy supply. The device ensures the continued supply to the consumer through automatic transferring to a stand-by feeder and protects the subsid-iary process from expensive stoppage times. Furthermore, through the possibility of manually-initiated transfers – for targeted clearings, for example – the operation of the installation is considerably simplified.

Voltage decreases or complete supply interruptions represent the most important and critical problems in the quality of energy supply today. It is especially true that voltage disturbances with electronic control systems and other sensitive installations can lead to complete loss of production and long stoppage times.

HMI (Human machine interface) of the SUE 3000 (3 Circuit-breaker configuration)

1

2

3

4

5

SUE 3000 High Speed Transfer System

− Configuration with 2 or 3 circuit-breakers − Flexible, project specific configuration and parameter-

isation with “functional block programming language” (FUPLA)

− Flexible communication concept (IEC 61850-8-1, SPABUS, LON, MODBUS RTU, IEC 60870-5-103, Ethernet interface, Webserver, Profibus DP with Adapter unit)

− Integrated disturbance recorder

1 Analysis of transfer with disturbance recorder | 2 Comfortable FUPLA programming | 3 Oscillogram of a fast transfer | 4 Oscillogram of a transfer at the 1st phase coincidence

As a perfectly integrated High Speed Transfer System (HSTS), in combination with the multifunctional protection and control units REF542plus and optimized ABB vacuum circuit-breakers type VM1-T (operating time about 16ms) SUE 3000 reaches extremely short transfer times of approximately 30ms. The ap-plication of the SUE 3000 High Speed Transfer Device marks technically and economically the optimized solution for ensur-ing uninterrupted power supply to many processes.

(106) DI_HSTD BLOCK OVER CURRENT

(24) HSTD BLOCK CB COUPLING

D2

114

155

(107) HSTD GENERAL BLOCK

(118) HSTD BLOCK CB COIL FAIL

D7

S7

S6

(131) CB1 ISOLATED

(131) CB1 ISOLATED

≥1Zeit [ms]: 5000

(67)

(67)

76

(73) 86

(119) HSTD BLOCK SB ISOLATED

(24) HSTD BLOCK CB DECOUPLING

(118) HSTD BLOCK CB COIL FAIL

(119) HSTD BLOCK CB ISOLATED

153

(83) DI_HSTD BLOCK INITIATIONS

S Q

R Q

S Q

R Q

≥1

≥1

≥1 S QRES

QNR≥1

≥1

1. Voltage of the busbar2. Main feeder current3. Stand-by feeder current4. Total CB open time (Fault entry until CB open) 5. Dead time without current flow

1. Voltage of the busbar2. Difference voltage between stand-by and busbar voltage3. Main feeder current4. Stand-by feeder current5. Transfer duration

1 2

3 41

2

3

4 5

Central Unit and HMI of SUE 3000

Contact

DE

AB

B 2

472

10 G

B p

rinte

d in

Ger

man

y (0

1.11

- P

DF

-AM

C)ABB AG

Calor Emag Medium Voltage ProductsOberhausener Strasse 3340472 Ratingen, GermanyPhone: +49(0)21 02/12-0Fax: +49(0)21 02/12-17 77E-Mail: powertech@de.abb.com

ABB AG Calor Emag Medium Voltage ProductsPetzower Strasse 814542 Werder (havel) OT Glindow, GermanyPhone: +49(0)21 02/12-0Fax: +49(0)21 02/12-17 77E-Mail: powertech@de.abb.com

www.abb.com/mediumvoltage

Note:We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts - is forbidden without prior written consent of ABB AG.

Copyright© 2011 ABBAll rights reserved