Success story bilz ter shrink fit collet ti al6v4
Click here to load reader
Transcript of Success story bilz ter shrink fit collet ti al6v4
1
Success Story
Customer benefit
Backbone back-up elementRep: Norbert RomothMachine: INDEX G 200Parts: 1500Material: TiAl6V4
Competion: RegoFixCollets ER25Ø 6mm (finishing)Ø 10mm (roughing )
Cutting data:Finishing:Vc= 75,36 fz= 0,05Roughing:Vc= 50,24 fz= 0,08
Finishing :Cutting time: 20sTool life: 500 pieceRoughing :Cutting time: 75sTool life: 500 piece
Reduction of the cutting time: 48s7,82min 7,02min 11,39%
Increase tool life: 300%
Cost calculation:
Reduction of the cutting time: 48s / work piece
Parts: 1500 pieceMachine cost: 3 €/min
Cost reduction:
LMT tools:TER0600/25 (finishing)TER1000/25 (roughing)
Cutting data: Finishing:Vc= 84,78 fz= 0,06Roughing:Vc= 50,24 fz= 0,2
Finishing :Cutting time: 17sTool life: 1500 pieceRoughing :Cutting time: 30sTool life: 1500 piece
Situation Solution
31.500 €
32.000 €
32.500 €
33.000 €
33.500 €
34.000 €
34.500 €
35.000 €
35.500 €
RegoFix BILZ
- 3.600€