Submittal, Models 51FB45 and 51FB55 and 51FBS, Aluminum ......CM = CEILING MODULE 9/16" (14) 5/16"...
Transcript of Submittal, Models 51FB45 and 51FB55 and 51FBS, Aluminum ......CM = CEILING MODULE 9/16" (14) 5/16"...
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 10 - 1 - 15 51F-1
ALUMINUM FILTER RETURN GRILLESFIXED LOUVERED BLADESMODELS: 51FB45, 51FB55 AND 51FBS
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
A A
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
1/2" (13)OR
3/4" (19)
1 1/4"(32)
MODELS:51FB45, 51FB55
MODEL:51FBS
3/4" (19)
DESCRIPTION:1. Material: Extruded aluminum.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 48" x 36" (1219 x 914) max. in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 20" x 20", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 508 x 508, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Metric available.
4. Blades are parallel to width (first dimension).5. Core is hinged and secured by 1/4 turn latches.
Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille)
6. Type N standard fastening is with sheet metal screws, (by others), through the neck of the outer frame for Type S Surface Mount installation.
7. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
MODELS:q 51FB45 45° deflection, 3/4" (19) spacingq 51FB55 45° deflection, 1/2" (13) spacingq 51FBS 0° deflection, 3/4" (19) spacing
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 10 - 1 - 15 51F-1
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
ALUMINUM FILTER RETURN GRILLESFIXED LOUVERED BLADESMODELS: 51FB45, 51FB55 AND 51FBS
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PL and FP Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in Panelq Border Type PLA: Aluminum Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® Panelq Border Type FPA: Aluminum Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FP (S or A) Fineline® Panel
Type PL (S or A) Lay-in Panel
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 10 - 1 - 15 51F-2
ALUMINUM FILTER RETURN GRILLESEGGCRATE GRID COREMODEL: 51FE
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
A
1/2"(13)
1 1/4" (32)
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
DESCRIPTION:1. Material: Extruded aluminum.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 48" x 36" (1219 x 914) max. in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 20" x 20", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 508 x 508, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Metric available.
4. Eggcrate core is 1/2" x 1/2" x 1/2" (13 x 13 x 13).5. Core is hinged and secured by 1/4 turn latches.
Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille) 6. Type N standard fastening is with sheet metal screws, (by
others), through the neck of the outer frame for Type S Surface Mount installation.
7. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 10 - 1 - 15 51F-2
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
ALUMINUM FILTER RETURN GRILLESEGGCRATE GRID COREMODEL: 51FE
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PL and FP Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in Panelq Border Type PLA: Aluminum Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® Panelq Border Type FPA: Aluminum Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FP (S or A) Fineline® Panel
Type PL (S or A) Lay-in Panel
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 10 - 1 - 15 51F-3
ALUMINUM FILTER RETURN GRILLESPERFORATED COREMODEL: 51FP
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
A
3/16"(5)
1 1/4" (32)
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
DESCRIPTION:1. Material: Extruded aluminum.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 48" x 36" (1219 x 914) max. in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 20" x 20", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 508 x 508, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Metric available.
4. Perforated face has 3/16" (5) holes on staggered 1/4" (6) centers. 51% free area.
5. Core is hinged and secured by 1/4 turn latches. Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille) 6. Type N standard fastening is with sheet metal screws, (by
others), through the neck of the outer frame for Type S Surface Mount installation.
7. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 10 - 1 - 15 51F-3
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
ALUMINUM FILTER RETURN GRILLESPERFORATED COREMODEL: 51FP
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PL and FP Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in Panelq Border Type PLA: Aluminum Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® Panelq Border Type FPA: Aluminum Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FP (S or A) Fineline® Panel
Type PL (S or A) Lay-in Panel
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 11 - 10 - 15 51FE45-1
ALUMINUM FILTER RETURN GRILLESEGGCRATE GRID CORE45° DEFLECTION • SIGHTPROOFMODEL: 51FE45
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
A
1/2"(13)
1 1/4" (32)
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
DESCRIPTION:1. Material: Extruded aluminum core and frame.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 48" x 24" (1219 x 610) max. in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 20" x 20", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 508 x 508, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Fractional and metric sizes are available.
4. 1/2" x 1/2" x 1/2" (13 x 13 x 13) aluminum grid core is angled at 45° to prevent "see through" from three directions.
5. Sight resistant parallel to width/ long dimension.6. Core is hinged and secured by 1/4 turn latches.
Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille)
7. Type N standard fastening is with sheet metal screws, (by others), through the neck of the outer frame for Type S Surface Mount installation.
8. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
5. Accessories:
q GK Foam Gasket
q EQT Earthquake Tabs
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 51F 11 - 10 - 15 51FE45-1
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
ALUMINUM FILTER RETURN GRILLESEGGCRATE GRID CORE45° DEFLECTION • SIGHTPROOFMODEL: 51FE45
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PL and FP Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in Panelq Border Type PLA: Aluminum Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® Panelq Border Type FPA: Aluminum Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FP (S or A) Fineline® Panel
Type PL (S or A) Lay-in Panel
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 61F 2 - 1 - 11 61F-1
STEEL FILTER RETURN GRILLESFIXED LOUVERED BLADESMODELS: 61FB45, 61FB55 AND 61FBS
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
A
1 1/4"(32)
1/2" (13)OR
3/4" (19)
MODELS:61FB45, 61FB55
A
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
MODEL:61FBS
3/4" (19)
DESCRIPTION:1. Material: Corrosion-resistant steel.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 36" x 24" (914 x 610) maximum in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Metric available.
4. Blades are parallel to width (first dimension).5. Core is hinged and secured by 1/4 turn latches.
Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille)
6. Type N standard fastening is with sheet metal screws, (by others), through the neck of the outer frame for Type S Surface Mount installation.
7. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
MODELS:q 61FB45 45° deflection, 3/4" (19) spacingq 61FB55 45° deflection, 1/2" (13) spacingq 61FBS 0° deflection, 3/4" (19) spacing
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 61F 2 - 1 - 11 61F-1
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
STEEL FILTER RETURN GRILLESFIXED LOUVERED BLADESMODELS: 61FB45, 61FB55 AND 61FBS
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PLS and FPS Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FPS Fineline® Panel
Type PLS Lay-in Panel
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 61F 2 - 1 - 11 61F-2
STEEL FILTER RETURN GRILLESEGGCRATE GRID COREMODEL: 61FE
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
A
1/2"(13)
1 1/4" (32)
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
DESCRIPTION:1. Material: Corrosion-resistant steel.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 48" x 36" (1219 x 914) maximum in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Metric available.
4. Eggcrate core is 1/2" x 1/2" x 1/2" (13 x 13 x 13).5. Core is hinged and secured by 1/4 turn latches.
Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille) 6. Type N standard fastening is with sheet metal screws, (by
others), through the neck of the outer frame for Type S Surface Mount installation.
7. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 61F 2 - 1 - 11 61F-2
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
STEEL FILTER RETURN GRILLESEGGCRATE GRID COREMODEL: 61FE
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PLS and FPS Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FPS Fineline® Panel
Type PLS Lay-in Panel
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 61F 2 - 1 - 11 61F-3
STEEL FILTER RETURN GRILLESPERFORATED COREMODEL: 61FP
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Page 1 of 2Dimensions are in inches (mm).
TYPE
S =
LIS
TED
SIZ
E - 3
/4" (
19)
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4
3/4"
(121
)
TYPE
S =
LIS
TED
SIZ
E
TYPE
L =
CEI
LIN
G M
OD
ULE
- 4"
(102
)
TYPE
S D
UC
T =
LIST
ED S
IZE
+ 1/
4" (6
)
TYPE
L D
UC
T =
CEI
LIN
G M
OD
ULE
- 3
3/4"
(95)
A
3/16"(5)
1 1/4" (32)
TYPE S = LISTED SIZE + 3 3/4" (95)
TYPE L = CEILING MODULE - 1/4" (6)
DESCRIPTION:1. Material: Corrosion-resistant steel.2. Provision for 1" (25) filter (by others) is standard.3. Type S available in nominal sizes 6" x 4" (152 x 102)
through 48" x 36" (1219 x 914) maximum in 1" (25) increments. Type L is available in ceiling module sizes: 12" x 12", 24" x 12", 24" x 24", 36" x 12", 36" x 24" and 48" x 24" (305 x 305, 610 x 305, 610 x 610, 914 x 305, 914 x 610 and 1219 x 610). Metric available.
4. Perforated face has 3/16" (5) holes on staggered 1/4" (6) centers. 51% free area.
5. Core is hinged and secured by 1/4 turn latches. Core panel is hinged on width dimension at top as standard (HT).
For other hinging requirements, specify one of the following:
q HB Hinged Bottomq HL Hinged Left (facing grille)q HR Hinged Right (facing grille) 6. Type N standard fastening is with sheet metal screws, (by
others), through the neck of the outer frame for Type S Surface Mount installation.
7. Standard Finish: AW Appliance White.
OPTIONS:1. Finish:
q SP Special ____________________ .
2. q F2 Provision for 2" (51) filter (by others).
3. Core Fastening:
q KK Knurled knob
q QT 1/4 turn slotted fastener
4. Installation Fastening:
q Type A Countersunk screwholes on face of outer frame (Type S Model).
FRAME/BORDER:q Type S Surface Mountq Type L Lay-in T-Bar
A = 2" (51) for 1" (25) filter. Standard. = 3" (76) for 2" (51) filter. Optional.
SCHEDULE TYPE: PROJECT: ENGINEER: CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
9 - 24 - 19 61F 2 - 1 - 11 61F-3
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
STEEL FILTER RETURN GRILLESPERFORATED COREMODEL: 61FP
Page 2 of 2Dimensions are in inches (mm).
CM - 1/4" (6)
CM = CEILING MODULE
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Available Border Type PLS and FPS Ceiling Module Sizes
Ceiling Module
Imperial Units (in.) Metric Units (mm)12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
Maximum grille neck size is CM Ceiling Module – 6" (152).
Panel Mounted/Ceiling Modulesq Border Type PLS: Steel Lay-in PanelThe grille or register is mounted in an extended panel to suit standard T-Bar Lay-in type ceilings.
q Border Type FPS: Steel Fineline® PanelThe grille or register is mounted in an extended panel that will fit a 9/16" (14) narrow regressed (bolt slot) T-Bar ceiling grid or 9/16" (14) Flat T-Bar with tegular ceiling tile.
Type FPS Fineline® Panel
Type PLS Lay-in Panel
SCHEDULE TYPE:PROJECT:ENGINEER:CONTRACTOR:
DATE B SERIES SUPERSEDES DRAWING NO.
6 - 14 - 16 6700 5 - 11 - 15 67F-1
STAINLESS STEEL FILTER RETURN GRILLESFIXED LOUVERED BLADES • REMOVABLE FACEMODELS: 67FB45(-O) AND 67FB55(-O) TYPE S OR L
Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.
Dimensions are in inches (mm).
DESCRIPTION:1. Construction: Type 304 stainless steel welded and reinforced framefeatures hairline mitered corners. Streamlined shaped grille blades on3/4" (19) or 1/2" (13) centers are fixed at 45 degrees to match andcompliment the supply grilles and registers.
2. Provision for 1" (25) filter (by others) is standard.3. Optional roll-formed Type 304 stainless steel opposed blade damper
has a screw driver operator accessible through face of register.Opposed blade damper is attached to removable grille.
4. Type S Surface Mount: Minimum size is 4" x 4" (102 x 102).Maximum size is 60" x 48" (1524 x 1219). For Lay-in T-Barapplications, order a listed size that is 3" (76) smaller than ceilingmodule size.
5. Standard frame has a 1 7/8" (48) face border.6. Standard fastening is Type A countersunk screw holes on the inside
neck of the outer frame. Grille is secured to the face of the outersubframe with Type QT stainless steel 1/4 turn slotted fasteners andis designed to be easily removable for access and cleaning.
7. For cleanroom applications where a quick release removable returngrille with mounting frame is required, but a filter is not, the grille maybe ordered without filter clips.
8. Standard finish is #4 Brushed Satin Polished.
� MODEL 67FB4545° Deflection HorizontalBlades on 3/4" (19) centers
� MODEL 67FB45-O45° Deflection HorizontalBlades on 3/4" (19) centers(with O. B. Damper)
� MODEL 67FB5545° Deflection HorizontalBlades on 1/2" (13) centers
� MODEL 67FB55-O45° Deflection HorizontalBlades on 1/2" (13) centers(with O. B. Damper)
OPTIONS:1. Construction:
� 316 Type 316 stainless steel.2. Finish:
� AW Appliance White.� SP Special ___________ .
3. Filter clips:� F2 Provision for 2" (51) filter
(by others).� FN No filter clips.
4. Core fastening:� WT 1/4 turn ‘wingnut’ fasteners.� HTQT Hinged at top with 1/4 turn slotted
fasteners on opposite side.5. � Other _________________ .
LIS
TED
SIZ
E - 1
/16"
(2)
1 3/4"
A
(44)
2 7/8"(73)
LISTED SIZE + 2 3/4" (70)
LIS
TED
SIZ
E +
2 3/
4" (7
0)
1 7/8" (48)FACE BORDER
1/4 TURN SLOTTEDQUICK RELEASE FASTENERS
DU
CT
= LI
STED
SIZ
E +
1/4"
(6)
B
1/2"(13)OR3/4"(19)
OPTIONALOBD
FILTERCLIPS
Frame/Border: Type S Surface Mount
Without OBD: A = 2 1/4" (57) for 1" (25) filter. Standard.= 3 1/4" (83) for 2" (51) filter. Optional.
With OBD: B = 3 7/8" (98) for 1" (25) filter. Standard.= 4 7/8" (124) for 2" (51) filter. Optional.
Ceiling Module Listed/Filter Size
12 x 12 (305 x 305) 9 x 9 (229 x 229)24 x 12 (610 x 305) 21 x 9 (533 x 229)24 x 24 (610 x 610) 21 x 21 (533 x 533)36 x 24 (914 x 610) 33 x 21 (838 x 533)48 x 24 (1219 x 610) 45 x 21 (1143x 533)
Lay-in sizes (Imperial Ceiling Modules):
Standard and OptiOnal FiniSheS FOr GrilleS and diFFuSerS
Nailor offers a selection of standard colors and finishes available on our gril les, registers and dif fusers. For painted finishes, our state-of-the-art paint systems provide environmentally friendly finishing solutions with uniform coverage and coating thickness. The result is an exceptionally durable finish that resists scratching, corrosion and general wear. Additional facili t ies for special requirements, as well as a selection of anodized or brushed finishes, complete our ability to provide unmatched beauty and durability for any application.
POWDER COATNailor’s powder coat is a high-tech thermosetting polyester powder coating with superior physical properties that provide excellent color and gloss retention. The finish offers extreme durability and hardness that resists scratching, chipping and general wear. Surface preparation includes degreasing and a chemical cleaning followed by a clean rinse before a final powder coat finish is applied and baked. The environmentally friendly Nailor powder coat system assures uniform coverage and color consistency resulting in a long lasting superior finish. Colors, including simulated anodizing, which is far more economical than color anodizing, can be selected from Nailor’s standard color chart or non-standard colors and can be matched from sample chips provided to Nailor.
ELECTROCOATINGE-Coat is an environmentally friendly coating that provides complete coverage and a wide range of performance properties, formulated to meet corrosion, durability and other performance specifications. Electrocoating is a highly automated process in which paint is electrically deposited onto a metal foundation. Film build thickness is uniform and overall application efficiencies are in excess of 90%. Paint is consistent on all part-to-part surfaces, preventing sags, runs or drips. E-Coat offers flexibility, better first yield pass and quicker production times compared to other forms of paint applications. Electrocoating is an excellent solution that offers superior properties and uniform finish.
CLEAR ANODIZING (Aluminum products only)
Clear anodizing is a clear oxide coating that exemplifies an aluminum surface’s natural oxide coating producing a hard, scratch resistant surface that is resistant to general wear and mild chemicals. The process provides a natural looking, virtually maintenance free finish that will endure for many years.
COLOR ANODIZING (Aluminum products only)
Color anodizing is an electrolytic process where, after standard anodizing procedures, colored metallic pigments penetrate the oxide surface pores producing a corrosion resistant, colorfast finish. The process results in a natural metallic appearance that requires little maintenance.
BRUSHED AND CLEAR COATAvailable on specific aluminum products (consult applicable product page for availability). Surface is brushed to achieve a scratch finish texture before being degreased and chemically cleaned. A clear lacquer coating is then applied to provide a durable protective finish.
#4 BRUSHED SATIN POLISHED (Stainless Steel products only)
Surface is polished to ASTM A480 #4 standard to achieve a bright durable finish that is resistant to mild chemicals and corrosion. A final coating is not required due to the inherent anti-corrosion properties of the stainless steel.
PRIME COATPrime coat provides a stable base for painting in the field. Surface pretreatment includes degreasing and a chemical cleaning before an alkyd prime coat is applied. After a thorough cleaning for dust, etc. that can contaminate the final finish and cause premature flaking or peeling, finish coat should be field applied as soon as possible.
PAINT PREPARED ALUMINUM (Aluminum products only)
Allows for field applied paint. Surface preparation includes degreasing and a chemical cleaning followed by a clean rinse. Finish coat should be field applied as soon as possible.
MILL FINISHSurface is left untreated and requires cleaning, degreasing, etc. in the field before final finish can be applied if required.
NAILOR POWDER COAT PROPERTIES
ELECTROCOATING PROPERTIES
FILM THICKNESS 2.0 to 3.0 mils
HARDNESS 2 H
IMPACT RESISTANCE
Direct: 160 inch - lbs.Reverse 160 inch - lbs.
SALT SPRAY 1000 hours
FILM THICKNESS .8 to 1.2 mils
HARDNESS HB TO H
IMPACT RESISTANCE
80 inch - lbs
SALT SPRAY 100 hours
“Complete Air Control and Distribution Solutions.” www.nailor.com
Standard and OptiOnal FiniSheS FOr GrilleS and diFFuSerS
The following standard colors and finishes are available on applicable Nailor air distribution products. Consult individual product pages for availability
The pictured finishes have been represented as best as possible within printing limitations. However, actual finish may vary. Contact your Nailor representative for a color chip sample on the material specified for a more accurate representation.
DBK - Black (for registers ordered with factory mounted dampers) - BA - Perforated Diffusers (4300 series only) Appliance White (AW) face with black back pan and pattern controllers.
WGDSOF2015“Complete Air Control and Distribution Solutions.” www.nailor.com
F41
GRILLES A
ND
REG
ISTERS
F
LOUVERED FACE GRILLES AND REGISTERS
PERFORMANCE DATA:
FIXED BLADE RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 5145H, 6145H, 6745H, 5145V, 6145V, 6745V, 51FB45, 61FB45, 67FB45
For performance data notes, see F42.
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity PressureNeg. Static Pressure
100.001.003
200.002.014
300.006.031
400.010.055
500.016.086
600.022.124
700.031.168
800.040.220
900.050.278
1000.062.344
6 x 6 8 x 410 x 4
0.20 0.23CFMNoise Criteria
20–
40–
60–
80–
100–
12019
14024
16028
18032
20036
8 x 6 10 x 512 x 4
0.28 0.30CFMNoise Criteria
28–
56–
84–
112–
14015
16820
19625
22429
25233
28037
10 x 6 12 x 516 x 4
0.35 0.37CFMNoise Criteria
35–
70–
105–
140–
17516
21021
24526
28030
31534
35038
8 x 8 14 x 5 0.38 0.40CFMNoise Criteria
38–
76–
114–
152–
19017
22822
26627
30431
34235
38039
12 x 6 18 x 4 0.42 0.45CFMNoise Criteria
42–
84–
126–
168–
21018
25223
29427
33632
37836
42040
12 x 8 16 x 624 x 4
0.58 0.59CFMNoise Criteria
58–
116–
174–
232–
29019
34824
40628
46433
52237
58041
10 x 10 14 x 726 x 4
0.61 0.62CFMNoise Criteria
61–
122–
183–
244–
30519
36624
42729
48834
54937
61041
18 x 6 14 x 828 x 4
30 x 40.65 0.67
CFMNoise Criteria
65–
130–
195–
26015
32520
39025
45530
52034
58538
65041
12 x 10 16 x 824 x 5
20 x 60.74 0.74
CFMNoise Criteria
74–
148–
222–
29615
37020
44425
51830
59235
66639
74042
12 x 12 14 x 1018 x 8
24 x 638 x 4
0.90 0.89CFMNoise Criteria
90–
180–
270–
36016
45021
54026
63031
72036
81039
90042
14 x 14 16 x 1220 x 10
24 x 834 x 6
1.24 1.22CFMNoise Criteria
124–
248–
372–
49616
62021
74426
86831
99236
111640
124043
18 x 12 16 x 1422 x 10
28 x 838 x 6
1.37 1.34CFMNoise Criteria
137–
274–
411–
54817
68522
82227
95932
109637
123340
137043
24 x 10 20 x 1230 x 8
1.52 1.49CFMNoise Criteria
152–
304–
456–
60817
76022
91227
106432
121638
136841
152044
16 x 16 18 x 1422 x 12
30 x 81.64 1.58
CFMNoise Criteria
164–
328–
492–
65618
82023
98428
114833
131238
147641
164044
24 x 12 18 x 1620 x 14
30 x 1036 x 8
1.85 1.78CFMNoise Criteria
185–
370–
555–
74018
92523
111028
129533
148038
166541
185045
18 x 18 20 x 1624 x 14
28 x 1232 x 10
2.10 2.01CFMNoise Criteria
210–
420–
630–
84018
105023
126029
147034
168039
189042
210045
30 x 12 20 x 1822 x 16
26 x 1436 x 10
2.32 2.23CFMNoise Criteria
232–
464–
696–
92819
116024
139229
162434
185639
208842
232046
20 x 20 24 x 1826 x 16
30 x 1436 x 12
2.61 2.48CFMNoise Criteria
261–
522–
783–
104419
130524
156630
182735
208840
234943
261046
22 x 22 24 x 2026 x 18
30 x 1636 x 14
3.17 3.00CFMNoise Criteria
317–
634–
951–
126820
158525
190231
221935
253640
285343
317047
30 x 18 24 x 2234 x 16
40 x 143.54 3.34
CFMNoise Criteria
354–
708–
1062–
141620
177025
212431
247836
283241
318644
354048
24 x 24 26 x 2228 x 20
32 x 1836 x 16
3.79 3.56CFMNoise Criteria
379–
758–
1137–
151620
189525
227431
265336
303241
341144
379048
36 x 18 32 x 2040 x 16
46 x 144.27 4.01
CFMNoise Criteria
427–
854–
1281–
170821
213526
256232
298937
341642
384345
427049
26 x 26 28 x 2448 x 14
4.47 4.19CFMNoise Criteria
447–
894–
1341–
178821
223526
268232
312937
357642
402345
447049
30 x 24 28 x 2632 x 22
36 x 2040 x 18
4.77 4.46CFMNoise Criteria
477–
954–
143115
190822
238527
286233
333938
381642
429346
477050
28 x 28 30 x 2636 x 22
40 x 205.20 4.85
CFMNoise Criteria
520–
1040–
156015
208022
260027
312033
364038
416043
468046
520050
36 x 24 30 x 2840 x 22
44 x 205.74 5.35
CFMNoise Criteria
574–
1148–
172215
229622
287028
344434
401838
459243
516647
574051
30 x 30 34 x 2638 x 24
48 x 205.99 5.57
CFMNoise Criteria
599–
1198–
179715
239622
299528
359434
419339
479243
539147
599051
F42
GRIL
LES
AN
D R
EGIS
TERS
F
Performance Notes:1. All pressures are in inches w.g..
2. Core Velocity is in feet per minute.
3. Performance data is for grille with opposed blade damper. Apply the following correction factors for grille without damper.
Negative Static Pressure Listed Value x 0.91.
Noise Criteria Listed value – 4.
4. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12 watts. Dash (–) in space indicates an Noise Criteria of less than 15.
5. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006. Airflow Measurements:
1. Balancing factors are applicable with or without dampers, providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on the inlet face (a minimum of 4), while positioning probe as shown above, one inch out from the face.
3. Total the various velocity readings and divide by the number of readings taken to arrive at an average inlet velocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the average velocity by the appropriate Ak factor. Airflow (CFM) = Average velocity (Vk) x Ak.
LOUVERED FACE GRILLES AND REGISTERS
PERFORMANCE DATA:
FIXED BLADE RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 5145H, 6145H, 6745H, 5145V, 6145V, 6745V, 51FB45, 61FB45, 67FB45
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity PressureNeg. Static Pressure
100.001.003
200.002.014
300.006.031
400.010.055
500.016.086
600.022.124
700.031.168
800.040.220
900.050.278
1000.062.344
32 x 32 36 x 3038 x 28
46 x 226.84 6.34
CFMNoise Criteria
684–
1368–
205216
273623
342029
410435
478839
547244
615648
684052
48 x 24 34 x 3436 x 32
38 x 3048 x 28
7.69 7.13CFMNoise Criteria
769–
1538–
230717
307623
384529
461435
538340
615244
692148
769052
36 x 36 38 x 3442 x 30
46 x 2848 x 26
8.69 8.02CFMNoise Criteria
869–
1738–
260717
347624
434529
521436
608341
695245
782149
869053
38 x 38 42 x 3444 x 34
48 x 309.70 8.94
CFMNoise Criteria
970–
1940–
291018
388024
485030
582036
679041
776045
873049
970053
40 x 40 42 x 3646 x 34
48 x 3210.77 9.90
CFMNoise Criteria
1077–
2154–
323118
430824
538530
646236
753942
861645
969350
1077054
42 x 42 46 x 4211.89 10.92
CFMNoise Criteria
1189–
2378–
356719
475625
594531
713437
832342
951246
1070150
1189054
44 x 44 13.07 11.98CFMNoise Criteria
1307–
2614–
392119
522825
653531
784237
914942
1045646
1176350
1307054
46 x 46 14.30 13.10CFMNoise Criteria
1430–
2860–
429020
572026
715032
858038
1001043
1144047
1287051
1430055
48 x 48 15.59 14.26CFMNoise Criteria
1559–
3118–
467720
623626
779532
935438
1091343
1247247
1403151
1559055
1"(25)
Air Measurement
Alnor Velometer with 2220A or 6070P Jet Probe
LOUVERED FACE GRILLES AND REGISTERS
G
GRILLES A
ND
REG
ISTERS
Performance Data – MetricFixed Blade Return Grilles and Registers • 5100, 6100 and 6700 SeriesModels: 5145H, 6145H, 6745H, 5145V, 6145V, 6745V, 51FB45, 61FB45, 67FB45
Listed Alternate CoreAk
Factor
Core Velocity, M/S 30 61 91 122 152 183 213 244 274 305
Duct Size Size Area VP 0.2 0.5 1.5 2.5 4.0 5.5 7.7 9.9 12.4 15.4(mm) (mm) (m2) Negative SP 0.7 3.5 7.7 13.7 21.4 30.8 41.8 54.7 69.1 85.5
152 x 152203 x 102
0.02 0.23L/S 9 19 28 38 47 57 66 76 85 94
254 x 102 NC — — — — — 19 24 28 32 36
203 x 152254 x 127
0.03 0.30L/S 13 26 40 53 66 79 92 106 119 132
305 x 102 NC — — — — 15 20 25 29 33 37
254 x 152305 x 127
0.03 0.37L/S 17 33 50 66 83 99 116 132 149 165
406 x 102 NC — — — — 16 21 26 30 34 38
203 x 203356 x 127
0.04 0.4L/S 18 36 54 72 90 108 126 143 161 179NC — — — — 17 22 27 31 35 39
305 x 152457 x 102
0.04 0.45L/S 20 40 59 79 99 119 139 159 178 198NC — — — — 18 23 27 32 36 40
305 x 203406 x 152
0.05 0.59L/S 27 55 82 109 137 164 192 219 246 274
610 x 102 NC — — — — 19 24 29 34 37 41
254 x 254356 x 178
0.06 0.62L/S 29 58 86 115 144 173 202 230 259 288
660 x 102 NC — — — — 19 24 29 34 37 41
457 x 152356 x 203 762 x 102
0.06 0.67L/S 31 61 92 123 153 184 215 245 276 307
711 x 102 NC — — — 15 20 25 30 34 38 41
305 x 254406 x 203 508 x 152
0.07 0.74L/S 35 70 105 140 175 210 244 279 314 349
610 x 127 NC — — — 15 20 25 30 35 39 42
305 x 305356 x 254 610 x 152
0.08 0.89L/S 42 85 127 170 212 255 297 340 382 425
457 x 203 965 x 102 NC — — — 16 21 26 31 36 39 42
356 x 356406 x 305 610 x 203
0.12 1.22L/S 59 117 176 234 293 351 410 468 527 585
508 x 254 864 x 152 NC — — — 16 21 26 31 36 40 43
457 x 305406 x 356 711 x 203
0.13 1.34L/S 65 129 194 259 323 388 453 517 582 647
559 x 254 965 x 152 NC — — — 17 22 27 32 37 40 43
610 x 254508 x 305
0.14 1.49L/S 72 143 215 287 359 430 502 574 646 717
762 x 203 NC — — — 17 22 27 32 38 41 44
406 x 406457 x 356 762 x 203
0.15 1.58L/S 77 155 232 310 387 464 542 619 697 774
559 x 305 NC — — — 18 23 28 33 38 41 44
610 x 305457 x 406 762 x 254
0.17 1.78L/S 87 175 262 349 437 524 611 698 786 873
508 x 356 813 x 203 NC — — — 18 23 28 33 38 41 45
457 x 457508 x 406 711 x 305
0.20 2.01L/S 99 198 297 396 495 595 694 793 892 991
610 x 356 813 x 254 NC — — — 18 23 28 33 38 41 45
762 x 305508 x 457 660 x 356
0.22 2.23L/S 109 219 328 438 547 657 766 876 985 1095
559 x 406 914 x 254 NC — — — 19 24 29 34 39 42 46
508 x 508610 x 457 762 x 356
0.24 2.48L/S 123 246 369 493 616 739 862 985 1108 1232
660 x 406 914 x 305 NC — — — 19 24 30 35 40 43 46
559 x 559610 x 508 762 x 406
0.29 3.00L/S 150 299 449 598 748 898 1047 1197 1346 1496
660 x 457 914 x 356 NC — — — 20 25 31 35 40 43 47
762 x 457610 x 559 1016 x 356
0.33 3.34L/S 167 334 501 668 835 1002 1169 1336 1503 1671
864 x 406 NC — — — 20 25 31 36 41 44 48
610 x 610660 x 559 813 x 458
0.35 3.56L/S 179 358 537 715 894 1073 1252 1431 1610 1789
711 x 508 914 x 406 NC — — — 20 25 31 36 41 44 48
914 x 457812 x 508 1168 x 356
0.40 4.01L/S 202 403 605 806 1008 1209 1411 1612 1814 2015
1016 x 406 NC — — — 21 26 32 37 42 45 49
660 x 660711 x 610
0.42 4.19L/S 211 422 633 844 1055 1266 1477 1688 1898 2109
1219 x 356 NC — — — 21 26 32 37 42 45 49
PDGRRA51616745Metric 2-22-2012
LOUVERED FACE GRILLES AND REGISTERS
G
GRIL
LES
AN
D R
EGIS
TERS
Performance Data – MetricFixed Blade Return Grilles and Registers • 5100, 6100 and 6700 SeriesModels: 5145H, 6145H, 6745H, 5145V, 6145V, 6745V 51FB45, 61FB45, 67FB45
L/S - liters per second
M/S - meters per second (velocity)
VP - velocity pressure - Pa
Neg. SP - negative static pressure - Pa
NC - Noise Criteria (values) based on 10 dB roomabsorption, re 10-12 watts.
Performance Notes:1. Performance data is for grille with opposed blade damper.Apply the following correction factors for grille without damper.
Neg. SP Listed Value x 0.91.
NC Listed value – 4.
2. Data derived from tests conducted in accordance withANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers,providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on theinlet face (a minimum of 4), while positioning probe as shownabove, one inch out from the face.
3. Total the various velocity readings and divide by the num-ber of readings taken to arrive at an average inlet velocity(Vk in M/S).
4. Calculate the airflow (L/S) by multiplying the averagevelocity by the appropriate Ak factor. Airflow (L/S) = Average velocity (Vk) x Ak.
1" (25)
Air Measurement
Alnor Velometer with 2220A or 6070P Jet Probe
PDGRRA51616745Metric 2-22-2012
Listed Alternate CoreAk
Factor
Core Velocity, M/S 30 61 91 122 152 183 213 244 274 305
Duct Size Size Area VP 0.2 0.5 1.5 2.5 4.0 5.5 7.7 9.9 12.4 15.4(mm) (mm) (m2) Negative SP 0.7 3.5 7.7 13.7 21.4 30.8 41.8 54.7 69.1 85.5
762 x 610711 x 660 914 x 508
0.02 4.46L/S 225 450 675 900 1125 1351 1576 1801 2026 2251
812 x 559 1016 x 457 NC — — 15 22 27 33 38 42 46 50
711 x 711762 x 660 1016 x 508
0.03 4.85L/S 245 491 736 982 1227 1472 1718 1963 2208 2454
914 x 559 NC — — 15 22 27 33 38 43 46 50
914 x 610762 x 711 1118 x 508
0.03 5.35L/S 271 542 813 1083 1354 1625 1896 2167 2438 2709
1016 x 559 NC — — 15 22 28 34 38 43 47 51
762 x 762864 x 660 1219 x 508
0.04 5.57L/S 283 565 848 1131 1413 1696 1979 2261 2544 2827
965 x 610 NC — — 15 22 28 34 39 43 47 51
813 x 813914 x 559 1168 x 559
0.04 6.34L/S 323 646 968 1291 1614 1937 2259 2582 2905 3228
965 x 711 NC — — 16 23 29 35 39 44 48 52
1219 x 610864 x 864 965 x 762
0.05 7.13L/S 363 726 1089 1452 1814 2177 2540 2903 3266 3629
914 x 813 1219 x 711 NC — — 17 23 29 35 40 44 48 52
914 x 914965 x 865 1168 x 711
0.06 8.02L/S 410 820 1230 1640 2050 2460 2871 3281 3691 4101
1067 x 762 1219 x 660 NC — — 17 24 29 36 41 45 49 53
965 x 9651067 x 914 1219 x 762
0.06 8.94L/S 458 915 1373 1831 2289 2746 3204 3662 4120 4577
1117 x 864 NC — — 18 24 30 36 41 45 49 53
1016 x 10161067 x 914 1219 x 813
0.07 9.90L/S 508 1016 1525 2033 2541 3049 3558 4066 4574 5082
1168 x 965 NC — — 18 24 30 36 42 45 50 54
1067 x 10671118 x 1016 1219 x 914
0.08 10.92L/S 561 1122 1683 2244 2805 3367 3928 4489 5050 5611
1168 x 965 NC — — 19 25 31 37 42 46 50 54
1118 x 11181168 x 1067
0.12 11.98L/S 617 1234 1850 2467 3084 3701 4317 4934 5551 6168
NC — — 19 25 31 37 42 46 50 54
1168 x 1168 0.13 13.10L/S 675 1350 2024 2699 3374 4049 4724 5399 6073 6748
NC — — 20 26 32 38 43 47 51 55
1219 x 1219 0.14 14.26L/S 736 1471 2207 2943 3678 4414 5150 5886 6621 7357
NC — — 20 26 32 38 43 47 51 55
F45
GRILLES A
ND
REG
ISTERS
F
LOUVERED FACE GRILLES AND REGISTERS
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity PressureNeg. Static Pressure
100.001.005
200.002.018
300.006.041
400.010.073
500.016.114
600.022.164
700.031.223
800.040.292
900.050.369
1000.062.456
6 x 6 8 x 410 x 4
0.20 0.23CFMNoise Criteria
20–
40–
60–
80–
10016
12021
14026
16030
18034
20038
8 x 6 10 x 512 x 4
0.28 0.30CFMNoise Criteria
28–
56–
84–
112–
14017
16822
19627
22431
25235
28039
10 x 6 12 x 516 x 4
0.35 0.37CFMNoise Criteria
35–
70–
105–
140–
17518
21023
24528
28032
31536
35040
8 x 8 14 x 5 0.38 0.40CFMNoise Criteria
38–
76–
114–
152–
19019
22824
26629
30433
34237
38041
12 x 6 18 x 4 0.42 0.45CFMNoise Criteria
42–
84–
126–
16815
21020
25225
29429
33634
37838
42042
12 x 8 16 x 624 x 4
0.58 0.59CFMNoise Criteria
58–
116–
174–
23216
29021
34826
40630
46435
52239
58043
10 x 10 14 x 726 x 4
0.61 0.62CFMNoise Criteria
61–
122–
183–
24416
30521
36626
42731
48836
54939
61043
18 x 6 14 x 828 x 4
30 x 40.65 0.67
CFMNoise Criteria
65–
130–
195–
26017
32522
39027
45532
52036
58540
65043
12 x 10 16 x 824 x 5
20 x 60.74 0.74
CFMNoise Criteria
74–
148–
222–
29617
37022
44427
51832
59237
66641
74044
12 x 12 14 x 1018 x 8
24 x 638 x 4
0.90 0.89CFMNoise Criteria
90–
180–
270–
36018
45023
54028
63033
72038
81041
90044
14 x 14 16 x 1220 x 10
24 x 834 x 6
1.24 1.22CFMNoise Criteria
124–
248–
372–
49618
62023
74428
86833
99238
111642
124045
18 x 12 16 x 1422 x 10
28 x 838 x 6
1.37 1.34CFMNoise Criteria
137–
274–
41115
54820
68525
82230
95935
109640
123343
137046
24 x 10 20 x 1230 x 8
1.52 1.49CFMNoise Criteria
152–
304–
45615
60820
76025
91230
106435
121641
136844
152047
16 x 16 18 x 1422 x 12
30 x 81.64 1.58
CFMNoise Criteria
164–
328–
49216
65621
82026
98431
114836
131241
147644
164047
24 x 12 18 x 1620 x 14
30 x 1036 x 8
1.85 1.78CFMNoise Criteria
185–
370–
55516
74021
92526
111031
129536
148041
166544
185048
18 x 18 20 x 1624 x 14
28 x 1232 x 10
2.10 2.01CFMNoise Criteria
210–
420–
63016
84021
105026
126032
147037
168042
189045
210048
30 x 12 20 x 1822 x 16
26 x 1436 x 10
2.32 2.23CFMNoise Criteria
232–
464–
69616
92822
116027
139232
162437
185642
208845
232049
20 x 20 24 x 1826 x 16
30 x 1436 x 12
2.61 2.48CFMNoise Criteria
261–
522–
78316
104422
130527
156633
182738
208843
234946
261049
22 x 22 24 x 2026 x 18
30 x 1636 x 14
3.17 3.00CFMNoise Criteria
317–
634–
95117
126823
158528
190234
221938
253643
285346
317050
30 x 18 24 x 2234 x 16
40 x 143.54 3.34
CFMNoise Criteria
354–
708–
106217
141623
177028
212434
247839
283244
318647
354051
24 x 24 26 x 2228 x 20
32 x 1836 x 16
3.79 3.56CFMNoise Criteria
379–
758–
113717
151623
189528
227434
265339
303244
341147
379051
36 x 18 32 x 2040 x 16
46 x 144.27 4.01
CFMNoise Criteria
427–
854–
128118
170825
213529
256236
298941
341646
384349
427053
26 x 26 28 x 2448 x 14
4.47 4.19CFMNoise Criteria
447–
894–
134118
178825
223530
268236
312941
357646
402349
447053
30 x 24 28 x 2632 x 22
36 x 2040 x 18
4.77 4.46CFMNoise Criteria
477–
954–
143119
190826
238531
286237
333942
381646
429350
477054
28 x 28 30 x 2636 x 22
40 x 205.20 4.85
CFMNoise Criteria
520–
1040–
156019
208026
260031
312037
364042
416047
468050
520054
36 x 24 30 x 2840 x 22
44 x 205.74 5.35
CFMNoise Criteria
574–
1148–
172219
229626
287032
344438
401842
459247
516651
574055
30 x 30 34 x 2638 x 24
48 x 205.99 5.57
CFMNoise Criteria
599–
1198–
179719
239626
299532
359438
419343
479247
539151
599055
PERFORMANCE DATA:
FIXED BLADE RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 5155H, 6155H, 6755H, 5155V, 6155V, 6755V, 51FB55, 61FB55, 67FB55
For performance data notes, see F46.
F46
GRIL
LES
AN
D R
EGIS
TERS
F
LOUVERED FACE GRILLES AND REGISTERS
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity PressureNeg. Static Pressure
100.001.005
200.002.018
300.006.041
400.010.073
500.016.114
600.022.164
700.031.223
800.040.292
900.050.369
1000.062.456
32 x 32 36 x 3038 x 28
46 x 226.84 6.34
CFMNoise Criteria
684–
136815
205220
273627
342033
410439
478843
547248
615652
684056
48 x 24 34 x 3436 x 32
38 x 3048 x 28
7.69 7.13CFMNoise Criteria
769–
153816
230721
307627
384533
461439
538344
615248
692152
769056
36 x 36 38 x 3442 x 30
46 x 2848 x 26
8.69 8.02CFMNoise Criteria
869–
173817
260721
347628
434533
521440
608345
695249
782153
869057
38 x 38 42 x 3444 x 34
48 x 309.70 8.94
CFMNoise Criteria
970–
194018
291022
388028
485034
582040
679045
776049
873053
970057
40 x 40 42 x 3646 x 34
48 x 3210.77 9.90
CFMNoise Criteria
1077–
215418
323123
430829
538535
646241
753947
861650
969355
1077059
42 x 42 44 x 4046 x 38
48 x 3611.89 10.92
CFMNoise Criteria
1189–
237819
356724
475630
594536
713442
832347
951251
1070155
1189059
44 x 44 46 x 4213.07 11.98
CFMNoise Criteria
1307–
261419
392124
522830
653536
784242
914947
1045651
1176355
1307059
46 x 46 14.30 13.10CFMNoise Criteria
143015
286020
429025
572031
715037
858043
1001048
1144052
1287056
1430060
48 x 48 15.59 14.26CFMNoise Criteria
155915
311820
467725
623631
779537
935443
1091348
1247252
1403156
1559060
PERFORMANCE DATA:
FIXED BLADE RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 5155H, 6155H, 6755H, 5155V, 6155V, 6755V, 51FB55, 61FB55, 67FB55
Performance Notes:1. All pressures are in inches w.g..
2. Core Velocity is in feet per minute.
3. Performance data is for grille with opposed blade damper. Apply the following correction factors for grille without damper.
Negative Static Pressure Listed Value x 0.91.
Noise Criteria Listed value – 4.
4. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12 watts. Dash (–) in space indicates an Noise Criteria of less than 15.
5. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006. Airflow Measurements:
1. Balancing factors are applicable with or without dampers, providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on the inlet face (a minimum of 4), while positioning probe as shown above, one inch out from the face.
3. Total the various velocity readings and divide by the number of readings taken to arrive at an average inlet velocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the average velocity by the appropriate Ak factor. Airflow (CFM) = Average velocity (Vk) x Ak.
1"(25)
Air Measurement
Alnor Velometer with 2220A or 6070P Jet Probe
F43
GRILLES A
ND
REG
ISTERS
F
LOUVERED FACE GRILLES AND REGISTERS
PERFORMANCE DATA:
FIXED BLADE RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51FH, 61FH, 67FH, 51FV, 61FV, 67FV, 51FBS, 61FBS
For performance data notes, see F44.
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity PressureNeg. Static Pressure
100.001.002
200.002.009
300.006.020
400.010.035
500.016.055
600.022079
700.031.107
800.040.140
900.050.177
1000.062.219
6 x 6 8 x 410 x 4
0.20 0.23CFMNoise Criteria
20–
40–
60–
80–
100–
12016
14018
16021
18025
20030
8 x 6 10 x 512 x 4
0.28 0.30CFMNoise Criteria
28–
56–
84–
112–
140–
16817
19619
22422
25226
28031
10 x 6 12 x 516 x 4
0.35 0.37CFMNoise Criteria
35–
70–
105–
140–
175–
21018
24520
28023
31527
35032
8 x 8 14 x 5 0.38 0.40CFMNoise Criteria
38–
76–
114–
152–
190–
22819
26621
30424
34228
38032
12 x 6 18 x 4 0.42 0.45CFMNoise Criteria
42–
84–
126–
168–
21015
25219
29422
33625
37829
42033
12 x 8 16 x 624 x 4
0.58 0.59CFMNoise Criteria
58–
116–
174–
232–
29015
34819
40622
46426
52230
58034
10 x 10 14 x 726 x 4
0.61 0.62CFMNoise Criteria
61–
122–
183–
244–
30515
36619
42722
48827
54930
61035
18 x 6 14 x 828 x 4
30 x 40.65 0.67
CFMNoise Criteria
65–
130–
195–
260–
32516
39020
45523
52027
58531
65035
12 x 10 16 x 824 x 5
20 x 60.74 0.74
CFMNoise Criteria
74–
148–
222–
296–
37016
44421
51824
59228
66632
74035
12 x 12 14 x 1018 x 8
24 x 638 x 4
0.90 0.89CFMNoise Criteria
90–
180–
270–
360–
45017
54021
63024
72029
81032
90035
14 x 14 16 x 1220 x 10
24 x 834 x 6
1.24 1.22CFMNoise Criteria
124–
248–
372–
496–
62017
74422
86825
99229
111633
124036
18 x 12 16 x 1422 x 10
28 x 838 x 6
1.37 1.34CFMNoise Criteria
137–
274–
411–
548–
68518
82223
95926
109631
123334
137037
24 x 10 20 x 1230 x 8
1.52 1.49CFMNoise Criteria
152–
304–
456–
608–
76018
91223
106427
121632
136835
152038
16 x 16 18 x 1422 x 12
30 x 81.64 1.58
CFMNoise Criteria
164–
328–
492–
656–
82019
98423
114827
131232
147635
164038
24 x 12 18 x 1620 x 14
30 x 1036 x 8
1.85 1.78CFMNoise Criteria
185–
370–
555–
740–
92519
111024
129527
148032
166535
185039
18 x 18 20 x 1624 x 14
28 x 1232 x 10
2.10 2.01CFMNoise Criteria
210–
420–
630–
840–
105019
126024
147028
168033
189036
210039
30 x 12 20 x 1822 x 16
26 x 1436 x 10
2.32 2.23CFMNoise Criteria
232–
464–
696–
928–
116019
139224
162428
185633
208836
232040
20 x 20 24 x 1826 x 16
30 x 1436 x 12
2.61 2.48CFMNoise Criteria
261–
522–
783–
1044–
130519
156624
182728
208833
234936
261040
22 x 22 24 x 2026 x 18
30 x 1636 x 14
3.17 3.00CFMNoise Criteria
317–
634–
951–
126815
158520
190225
221929
253633
285336
317040
30 x 18 24 x 2234 x 16
40 x 143.54 3.34
CFMNoise Criteria
354–
708–
1062–
141615
177020
212425
247829
283234
318637
354041
24 x 24 26 x 2228 x 20
32 x 1836 x 16
3.79 3.56CFMNoise Criteria
379–
758–
1137–
151615
189520
227425
265330
303234
341137
379041
36 x 18 32 x 2040 x 16
46 x 144.27 4.01
CFMNoise Criteria
427–
854–
1281–
170817
213522
256226
298930
341635
384338
427042
26 x 26 28 x 2448 x 14
4.47 4.19CFMNoise Criteria
447–
894–
1341–
178817
223522
268226
312930
357635
402338
447042
30 x 24 28 x 2632 x 22
36 x 2040 x 18
4.77 4.46CFMNoise Criteria
477–
954–
1431–
190818
238523
286227
333931
381635
429339
477043
28 x 28 30 x 2636 x 22
40 x 205.20 4.85
CFMNoise Criteria
520–
1040–
1560–
208018
260023
312027
364031
416036
468039
520043
36 x 24 30 x 2840 x 22
44 x 205.74 5.35
CFMNoise Criteria
574–
1148–
1722–
229618
287023
344427
401831
459236
516640
574044
30 x 30 34 x 2638 x 24
48 x 205.99 5.57
CFMNoise Criteria
599–
1198–
1797–
239618
299523
359428
419332
479236
539140
599044
F44
GRIL
LES
AN
D R
EGIS
TERS
F
LOUVERED FACE GRILLES AND REGISTERS
PERFORMANCE DATA:
FIXED BLADE RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51FH, 61FH, 67FH, 51FV, 61FV, 67FV, 51FBS, 61FBS
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
Core VelocityVelocity PressureNeg. Static Pressure
100.001.003
200.002.014
300.006.031
400.010.055
500.016.086
600.022.124
700.031.168
800.040.220
900.050.278
1000.062.344
32 x 32 36 x 3038 x 28
46 x 226.84 6.34
CFMNoise Criteria
684–
1368–
2052–
273618
342024
410428
478832
547237
615641
684045
48 x 24 34 x 3436 x 32
38 x 3048 x 28
7.69 7.13CFMNoise Criteria
769–
1538–
2307–
307618
384524
461429
538333
615237
692141
769045
36 x 36 38 x 3442 x 30
46 x 2848 x 26
8.69 8.02CFMNoise Criteria
869–
1738–
2607–
347619
434524
521429
608334
695238
782142
869046
38 x 38 42 x 3444 x 34
48 x 309.70 8.94
CFMNoise Criteria
970–
1940–
2910–
388019
485025
582030
679034
776038
873042
970046
40 x 40 42 x 3646 x 34
48 x 3210.77 9.90
CFMNoise Criteria
1077–
2154–
3231–
430820
538526
646230
753935
861638
969343
1077047
42 x 42 46 x 4211.89 10.92
CFMNoise Criteria
1189–
2378–
3567–
475620
594526
713431
832335
951239
1070143
1189047
44 x 44 13.07 11.98CFMNoise Criteria
1307–
2614–
392115
522820
653526
784231
914935
1045639
1176343
1307047
46 x 46 14.30 13.10CFMNoise Criteria
1430–
2860–
429015
572021
715027
858032
1001036
1144040
1287044
1430048
48 x 48 15.59 14.26CFMNoise Criteria
1559–
3118–
467716
623621
779527
935432
1091336
1247240
1403144
1559048
Performance Notes:1. All pressures are in inches w.g..
2. Core Velocity is in feet per minute.
3. Performance data is for grille with opposed blade damper. Apply the following correction factors for grille without damper.
Negative Static Pressure Listed Value x 0.91.
Noise Criteria Listed value – 4.
4. Noise Criteria (NC) values are based upon 10dB room absorption, re 10-12 watts. Dash (-) in space indicates an Noise Criteria of less than 15.
5. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006. Airflow Measurements:
1. Balancing factors are applicable with or without dampers, providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on the inlet face (a minimum of 4), while positioning probe as shown above, one inch out from the face.
3. Total the various velocity readings and divide by the number of readings taken to arrive at an average inlet velocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the average velocity by the appropriate Ak factor. Airflow (CFM) = Average velocity (Vk) x Ak.
1"(25)
Air Measurement
Alnor Velometer with 2220A or 6070P Jet Probe
F106
GRIL
LES
AN
D R
EGIS
TERS
F
EGGCRATE RETURN AND EXHAUST GRILLES
PERFORMANCE DATA:
EGGCRATE RETURN AND EXHAUST GRILLES AND REGISTERS • 5100, 6100 & 6700 SERIES
MODELS: 51EC, 61EC, 67EC, 51FE, 61FE
For performance data notes, see F107.
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVelocity PressureNeg. Static Pressure
300.006.012
400.010.021
500.016.033
600.022.048
700.031.065
800.040.085
900.050.107
1000.062.132
1200.090.190
1400.122.259
6 x 6 8 x 410 x 4
0.20 0.25CFMNoise Criteria
60–
80–
100–
120–
140–
16015
18020
20023
24029
28034
8 x 6 10 x 512 x 4
0.27 0.33CFMNoise Criteria
81–
108–
135–
162–
189–
21617
24321
27024
32430
37835
10 x 6 12 x 516 x 4
0.35 0.41CFMNoise Criteria
105–
140–
175–
210–
245–
28018
31522
35025
42031
49036
8 x 8 14 x 5 0.38 0.44CFMNoise Criteria
114–
152–
190–
228–
26615
30418
34223
38026
45632
53237
12 x 6 18 x 4 0.42 0.50CFMNoise Criteria
126–
168–
210–
252–
29415
33619
37823
42026
50432
58837
12 x 8 16 x 624 x 4
0.58 0.66CFMNoise Criteria
174–
232–
290–
348–
40617
46420
52224
58027
69633
81238
10 x 10 14 x 726 x 4
0.61 0.69CFMNoise Criteria
183–
244–
305–
366–
42717
48820
54925
61028
73234
85439
18 x 6 14 x 828 x 4
30 x 40.65 0.74
CFMNoise Criteria
195–
260–
325–
390–
45517
52021
58525
65028
78034
91039
12 x 10 16 x 824 x 5
20 x 60.74 0.82
CFMNoise Criteria
222–
296–
370–
444–
51818
59221
66625
74029
88835
103640
12 x 12 14 x 1018 x 8
24 x 638 x 4
0.90 0.99CFMNoise Criteria
270–
360–
450–
540–
63018
72022
81026
90030
108036
126041
14 x 14 16 x 1220 x 10
24 x 834 x 6
1.24 1.35CFMNoise Criteria
372–
496–
620–
744–
86819
99223
111627
124031
148837
173642
18 x 12 16 x 1420 x 10
28 x 838 x 6
1.37 1.49CFMNoise Criteria
411–
548–
685–
822–
95920
109624
123327
137031
164437
191842
24 x 10 20 x 1230 x 8
1.52 1.65CFMNoise Criteria
456–
608–
760–
91215
106420
121624
136828
152032
182438
42043
16 x 16 18 x 1422 x 12
30 x 81.64 1.76
CFMNoise Criteria
492–
656–
820–
98415
114820
131224
147628
164032
196838
229643
24 x 12 18 x 1620 x 14
30 x 1036 x 8
1.85 1.98CFMNoise Criteria
555–
740–
925–
111015
129520
148024
166528
185032
222038
259043
18 x 18 20 x 1624 x 14
28 x 1232 x 10
2.10 2.23CFMNoise Criteria
630–
840–
1050–
126015
147020
168025
189028
210032
252038
294043
30 x 12 20 x 1822 x 16
26 x 1436 x 10
2.32 2.48CFMNoise Criteria
696–
928–
1160–
139216
162420
185626
208829
232033
278439
324844
20 x 20 24 x 1826 x 16
30 x 1436 x 12
2.61 2.75CFMNoise Criteria
783–
1044–
1305–
156616
182720
208826
234929
261033
313239
365444
22 x 22 24 x 2026 x 18
30 x 1636 x 14
3.17 3.33CFMNoise Criteria
951–
1268–
1585–
190217
221921
253626
285330
317034
380440
443845
30 x 18 24 x 2234 x 16
40 x 143.54 3.71
CFMNoise Criteria
1062–
1416–
1770–
212417
247822
283226
318630
354034
424840
495645
24 x 24 26 x 2228 x 20
32 x 1836 x 16
3.79 3.96CFMNoise Criteria
1137–
1516–
1895–
227418
265323
303227
341131
379035
454841
530646
36 x 18 32 x 2040 x 16
46 x 144.29 4.46
CFMNoise Criteria
1287–
1716–
2145–
257418
300323
343227
386131
429035
514841
600646
26 x 26 28 x 2448 x 14
4.47 4.65CFMNoise Criteria
1341–
1788–
2235–
268219
312924
357628
402332
447036
536442
625847
30 x 24 28 x 2632 x 22
36 x 2040 x 18
4.77 4.95CFMNoise Criteria
1431–
1908–
238515
286219
333924
381629
429332
477036
572442
667847
28 x 28 30 x 2636 x 22
40 x 205.20 5.39
CFMNoise Criteria
1560–
2080–
2600–
312019
364024
416029
468032
520036
624041
728046
36 x 24 30 x 2840 x 22
44 x 205.74 5.94
CFMNoise Criteria
1722–
2296–
2870–
344420
401825
459229
516633
574037
688843
803648
30 x 30 34 x 2638 x 24
48 x 205.99 6.19
CFMNoise Criteria
1797–
2396–
2995–
359420
419325
479229
539133
599037
718843
838648
–
F107
GRILLES A
ND
REG
ISTERS
F
EGGCRATE RETURN AND EXHAUST GRILLES
PERFORMANCE DATA:
EGGCRATE RETURN AND EXHAUST GRILLES AND REGISTERS • 5100, 6100 & 6700 SERIES
MODELS: 51EC, 61EC, 67EC, 51FE, 61FE
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVelocity PressureNeg. Static Pressure
300.006.012
400.010.021
500.016.033
600.022.048
700.031.065
800.040.085
900.050.107
1000.062.132
1200.090.190
1400.122.259
32 x 32 36 x 3038 x 28
46 x 226.84 7.0
CFMNoise Criteria
2052–
2736–
342015
410420
478826
547230
615634
684037
615634
684037
48 x 24 34 x 3436 x 32
38 x 3048 x 28
7.69 7.92CFMNoise Criteria
2307–
3076–
384516
461421
538326
615230
692135
769038
692135
769038
36 x 36 38 x 3442 x 30
46 x 2848 x 26
8.69 8.91CFMNoise Criteria
2607–
3476–
434516
521422
608327
695231
782135
869038
1042844
1216649
38 x 38 42 x 3444 x 34
48 x 309.70 9.93
CFMNoise Criteria
2910–
3880–
485016
582022
679027
776031
873036
970039
1164045
1358050
40 x 40 42 x 3646 x 34
48 x 3210.77 11.00
CFMNoise Criteria
3231–
4308–
538516
646222
753928
861632
969337
1077040
1292446
1507851
42 x 42 44 x 4046 x 38
48 x 3611.89 12.13
CFMNoise Criteria
3567–
4756–
594517
713423
832328
951232
1070137
1189040
692146
769051
44 x 44 46 x 4213.07 13.31
CFMNoise Criteria
3921–
5228–
653517
784223
914928
1045633
1176337
1307040
1568446
1829851
46 x 46 14.30 14.55CFMNoise Criteria
4290–
5720–
715018
858024
1001029
1144033
1287037
1430040
1716046
2002052
48 x 48 15.59 15.84CFMNoise Criteria
4677–
6236–
779518
935424
1091329
1247233
1403137
1559040
1870846
2182652
Performance Notes:1. All pressures are in inches w.g..2. Core Velocity is in feet per minute.3. Performance data is for grille tested without damper. Apply the following correction factors for addition of opposed blade damper to grille.
Neg. Static Pressure Listed Value x 1.25.
Noise Criteria Add + 6 to listed value.
4. Noise Criteria (NC) values are based on a room absorption of 10 dB, re 10-12 watts. Dash (—) in space denotes a Noise Criteria level of less than 15.5. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers, providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on the inlet face (a minimum of 4), while positioning probe as shown above, one inch out from the face.
3. Total the various velocity readings and divide by the number of readings taken to arrive at an average inlet velocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the average velocity by the appropriate Ak factor.
Airflow (CFM) = Average velocity (Vk) x Ak.
1"(25)
Air Measurement
Alnor Velometer with 2220A or 6070P Jet Probe
F108
GRIL
LES
AN
D R
EGIS
TERS
F
EGGCRATE RETURN AND EXHAUST GRILLES
PERFORMANCE DATA:
SIGHT-PROOF EGGCRATE RETURN AND EXHAUST GRILLES AND REGISTERS • 5100
MODEL: 51EC45
ListedDuct Size(inches)
NominalDuct Area(sq. ft.)
Duct Velocity, FPMVelocity PressureNeg. Static Pressure
200.002.016
250.004.025
300.006.037
350.008.050
400.010.065
450.013.082
500.016.101
550.019.123
600.022.146
650.026.171
10 x 10 0.69Airflow, CFMNoise Criteria
139–
174–
20816
24320
27824
31327
34730
38233
41735
45137
22 x 10 1.53Airflow, CFMNoise Criteria
306–
382–
45818
53522
61126
68830
76433
84036
91738
99341
22 x 22 3.36Airflow, CFMNoise Criteria
672–
84016
100822
117627
134431
151334
168138
184941
201743
218546
46 x 22 7.03Airflow, CFMNoise Criteria
140621
175726
210830
246034
281137
316340
351442
386545
421747
456849
Performance Notes:1. All pressures are in inches w.g..2. Core Velocity is in feet per minute.3. Performance data is for grille tested without damper. Apply the following correction factors for addition of opposed blade damper to grille.
Neg. Static Pressure Listed Value x 1.10.
Noise Criteria Add 5 dB to listed value.
4. Noise Criteria (NC) values are based on a room absorption of 10 dB, re 10-12 watts. Dash (–) in space denotes a Noise Criteria level of less than 15.5. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
F117
GRILLES A
ND
REG
ISTERS
F
PERFORATED RETURN GRILLES
PERFORMANCE DATA:
PERFORATED RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51PR, 51FP, 61PR, 61FP, 67PR, 51PRC, 61PRC
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVelocity PressureNeg. Static Pressure
300.006.024
400.010.042
500.016.067
600.022.095
700.031.130
800.040.170
900.051.215
1000.062.265
1200.090.382
6 x 6 8 x 410 x 4
0.20 0.20CFMNoise Criteria
60–
80–
100–
12015
14021
16026
18032
20037
24044
8 x 6 10 x 512 x 4
0.27 0.27CFMNoise Criteria
81–
108–
135–
16216
18922
21628
24333
27038
32445
10 x 6 12 x 516 x 4
0.35 0.33CFMNoise Criteria
105–
140–
175–
21017
24524
28029
31534
35039
42046
8 x 8 14 x 5 0.38 0.36CFMNoise Criteria
114–
152–
190–
22818
26625
30429
34235
38040
45647
12 x 6 18 x 4 0.42 0.40CFMNoise Criteria
126–
168–
210–
25218
29425
33630
37835
42040
50447
12 x 8 16 x 624 x 4
0.58 0.53CFMNoise Criteria
174–
232–
290–
34820
40627
46431
52236
58041
69648
10 x 10 14 x 70.61 0.56
CFMNoise Criteria
183–
244–
305–
36620
42727
48831
54937
61042
73249
18 x 6 14 x 828 x 4
30 x 40.65 0.60
CFMNoise Criteria
195–
260–
325–
39020
45527
52032
58537
65042
78049
12 x 10 16 x 824 x 5
20 x 60.74 0.67
CFMNoise Criteria
222–
296–
370–
44421
51828
59232
66637
74043
88850
12 x 12 14 x 1018 x 8
24 x 638 x 4
0.90 0.80CFMNoise Criteria
270–
360–
45015
54022
63028
72033
81038
90044
108051
14 x 14 16 x 1220 x 10
24 x 834 x 6
1.24 1.09CFMNoise Criteria
372–
496–
62016
74423
86829
99234
111639
124045
148852
18 x 12 16 x 1422 x 10
28 x 838 x 6
1.37 1.20CFMNoise Criteria
411–
548–
68517
82223
95930
109635
123339
137045
164452
24 x 10 20 x 1230 x 8
1.52 1.33CFMNoise Criteria
456–
608–
76017
91224
106430
121635
136840
152046
182453
16 x 16 18 x 1422 x 12
30 x 81.64 1.42
CFMNoise Criteria
492–
656–
82017
98424
114830
131235
147640
164046
196853
24 x 12 18 x 1620 x 14
30 x 1036 x 8
1.85 1.60CFMNoise Criteria
555–
740–
92517
111024
129530
148035
166540
185046
222053
18 x 18 20 x 1624 x 14
28 x 1232 x 10
2.10 1.80CFMNoise Criteria
630–
840–
105017
126024
147030
168036
189040
210046
252053
30 x 12 20 x 1822 x 16
26 x 1436 x 10
2.32 2.00CFMNoise Criteria
696–
928–
116017
139225
162430
185637
208841
232047
278454
20 x 20 24 x 1826 x 16
30 x 1436 x 12
2.61 2.22CFMNoise Criteria
783–
1044–
130518
156625
182730
208837
234941
261047
313254
22 x 22 24 x 2026 x 18
30 x 1636 x 14
3.17 2.69CFMNoise Criteria
951–
1268–
158518
190226
221931
253637
285342
317048
380455
30 x 18 24 x 2234 x 16
40 x 143.54 3.00
CFMNoise Criteria
1062–
1416–
177019
212426
247832
283237
318642
354048
424855
24 x 24 26 x 2228 x 20
32 x 1836 x 16
3.79 3.20CFMNoise Criteria
1137–
1516–
189519
227427
265333
303238
341143
379049
454856
36 x 18 32 x 2040 x 16
46 x 144.29 3.60
CFMNoise Criteria
1287–
1716–
214519
257427
300333
343238
386143
429049
514856
26 x 26 28 x 2448 x 14
4.47 3.76CFMNoise Criteria
1341–
1788–
223520
268228
312934
357639
402544
447050
536457
30 x 24 28 x 2632 x 22
36 x 2040 x 18
4.77 4.00CFMNoise Criteria
1431–
1908–
238521
286228
333934
381639
429344
477050
572457
28 x 28 30 x 2636 x 22
40 x 205.20 4.36
CFMNoise Criteria
1560–
2080–
260021
312028
364034
416040
468044
520050
624057
36 x 24 30 x 2840 x 22
44 x 205.74 4.80
CFMNoise Criteria
1722–
2296–
287022
344429
401835
459240
516645
574050
688858
30 x 30 34 x 2638 x 24
48 x 205.99 5.00
CFMNoise Criteria
1797–
2396–
299522
359429
419335
479240
539145
599051
718858
For performance data notes, see F118.
F118
GRIL
LES
AN
D R
EGIS
TERS
F
PERFORATED RETURN GRILLES
PERFORMANCE DATA:
PERFORATED RETURN GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51PR, 51FP, 61PR, 61FP, 67PR, 51PRC, 61PRC
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVelocity PressureNeg. Static Pressure
300.006.024
400.010.042
500.016.067
600.022.095
700.031.130
800.040.170
900.051.215
1000.062.265
1200.090.382
32 x 32 36 x 3038 x 28
46 x 226.84 5.69
CFMNoise Criteria
2052–
273615
342023
410429
478836
547241
615646
684051
820858
48 x 24 34 x 3436 x 32
38 x 3048 x 28
7.69 6.40CFMNoise Criteria
2307–
307616
384524
461430
538336
615241
692147
769052
922859
36 x 36 38 x 3442 x 30
26 x 2848 x 26
8.69 7.20CFMNoise Criteria
2607–
347616
434524
521431
608337
695242
782147
869052
1042859
38 x 38 42 x 3444 x 34
48 x 309.70 8.02
CFMNoise Criteria
2910–
388017
485024
582031
679037
776042
873048
970053
1164060
40 x 40 42 x 3646 x 34
48 x 3210.77 8.89
CFMNoise Criteria
3231–
430817
538524
646231
753938
861643
969349
1077054
1292461
42 x 42 44 x 4046 x 38
48 x 3611.89 9.80
CFMNoise Criteria
3567–
475618
594525
713432
832338
951243
1070149
1189054
1426861
44 x 44 46 x 4213.07 10.76
CFMNoise Criteria
3921–
522818
653525
784232
914938
1045644
1176349
1307054
1568461
46 x 46 14.30 11.76CFMNoise Criteria
4290–
572019
715026
858033
1001039
1144044
1287049
1430054
1716061
48 x 48 15.59 12.80CFMNoise Criteria
4677–
623619
779526
935433
1091339
1247244
1403149
1559054
1870861
Performance Notes:1. All pressures are in inches w.g..2. Core Velocity is in feet per minute.3. Performance data is for grille tested without damper. Apply the following correction factors for addition of opposed blade damper to grille.
Neg. Static Pressure Listed Value x 1.10.
Noise Criteria Add 5 dB to listed value.
4. Noise Criteria (NC) values are based on a room absorption of 10 dB, re 10-12 watts. Dash (–) in space denotes a Noise Criteria level of less than 15.5. Data derived from tests conducted in accordance with ANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers, providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on the inlet face (a minimum of 4), while positioning probe as shown above, one inch out from the face.
3. Total the various velocity readings and divide by the number of readings taken to arrive at an average inlet velocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the average velocity by the appropriate Ak factor.
Airflow (CFM) = Average velocity (Vk) x Ak.
1"(25)
Air Measurement
Alnor Velometer with 2220A or 6070P Jet Probe
Listed Alternate Core Ak Core Velocity 100 200 300 400 500 600 700 800 900 1000Duct Size Size Area Factor VP .001 .002 .006 .010 .016 .022 .031 .040 .050 .062(inches) (inches) (sq. ft.) Neg. SP .003 .014 .031 .055 .086 .124 .168 .220 .278 .344
8 x 4 CFM 20 40 60 80 100 120 140 160 180 2006 x 6 10 x 4 0.20 0.23 NC – – – – – 19 24 28 32 36
10 x 5 CFM 28 56 84 112 140 168 196 224 252 2808 x 6 12 x 4 0.28 0.30 NC – – – – 15 20 25 29 33 37
12 x 5 CFM 35 70 105 140 175 210 245 280 315 35010 x 6 16 x 4 0.35 0.37 NC – – – – 16 21 26 30 34 38
CFM 38 76 114 152 190 228 266 304 342 3808 x 8 14 x 5 0.38 0.40 NC – – – – 17 22 27 31 35 39
CFM 42 84 126 168 210 252 294 336 378 42012 x 6 18 x 4 0.42 0.45 NC – – – – 18 23 27 32 36 40
16 x 6 CFM 58 116 174 232 290 348 406 464 522 58012 x 8 24 x 4 0.58 0.59 NC – – – – 19 24 28 33 37 41
14 x 7 CFM 61 122 183 244 305 366 427 488 549 61010 x 10 26 x 4 0.61 0.62 NC – – – – 19 24 29 34 37 41
14 x 8 30 x 4 CFM 65 130 195 260 325 390 455 520 585 65018 x 6 28 x 4 0.65 0.67 NC – – – 15 20 25 30 34 38 41
16 x 8 20 x 6 CFM 74 148 222 296 370 444 518 592 666 74012 x 10 24 x 5 0.74 0.74 NC – – – 15 20 25 30 35 39 42
14 x 10 24 x 6 CFM 90 180 270 360 450 540 630 720 810 90012 x 12 18 x 8 38 x 4 0.90 0.89 NC – – – 16 21 26 31 36 39 42
16 x 12 24 x 8 CFM 124 248 372 496 620 744 868 992 1116 124014 x 14 20 x 10 34 x 6 1.24 1.22 NC – – – 16 21 26 31 36 40 43
16 x 14 28 x 8 CFM 137 274 411 548 685 822 959 1096 1233 137018 x 12 22 x 10 38 x 6 1.37 1.34 NC – – – 17 22 27 32 37 40 43
20 x 12 CFM 152 304 456 608 760 912 1064 1216 1368 152024 x 10 30 x 8 1.52 1.49 NC – – – 17 22 27 32 38 41 44
18 x 14 30 x 8 CFM 164 328 492 656 820 984 1148 1312 1476 164016 x 16 22 x 12 1.64 1.58 NC – – – 18 23 28 33 38 41 44
18 x 16 30 x 10 CFM 185 370 555 740 925 1110 1295 1480 1665 185024 x 12 20 x 14 36 x 8 1.85 1.78 NC – – – 18 23 28 33 38 41 45
20 x 16 28 x 12 CFM 210 420 630 840 1050 1260 1470 1680 1890 210018 x 18 24 x 14 32 x 10 2.10 2.01 NC – – – 18 23 29 34 39 42 45
20 x 18 26 x 14 CFM 232 464 696 928 1160 1392 1624 1856 2088 232030 x 12 22 x 16 36 x 10 2.32 2.23 NC – – – 19 24 29 34 39 42 46
24 x 18 30 x 14 CFM 261 522 783 1044 1305 1566 1827 2088 2349 261020 x 20 26 x 16 36 x 12 2.61 2.48 NC – – – 19 24 30 35 40 43 46
24 x 20 30 x 16 CFM 317 634 951 1268 1585 1902 2219 2536 2853 317022 x 22 26 x 18 36 x 14 3.17 3.00 NC – – – 20 25 31 35 40 43 47
24 x 22 40 x 14 CFM 354 708 1062 1416 1770 2124 2478 2832 3186 354030 x 18 34 x 16 3.54 3.34 NC – – – 20 25 31 36 41 44 48
26 x 22 32 x 18 CFM 379 758 1137 1516 1895 2274 2653 3032 3411 379024 x 24 28 x 20 36 x 16 3.79 3.56 NC – – – 20 25 31 36 41 44 48
32 x 20 46 x 14 CFM 427 854 1281 1708 2135 2562 2989 3416 3843 427036 x 18 40 x 16 4.27 4.01 NC – – – 21 26 32 37 42 45 49
28 x 24 CFM 447 894 1341 1788 2235 2682 3129 3576 4023 447026 x 26 48 x 14 4.47 4.19 NC – – – 21 26 32 37 42 45 49
28 x 26 36 x 20 CFM 477 954 1431 1908 2385 2862 3339 3816 4293 477030 x 24 32 x 22 40 x 18 4.77 4.46 NC – – 15 22 27 33 38 42 46 50
30 x 26 40 x 20 CFM 520 1040 1560 2080 2600 3120 3640 4160 4680 520028 x 28 36 x 22 5.20 4.85 NC – – 15 22 27 33 38 43 46 50
30 x 28 44 x 20 CFM 574 1148 1722 2296 2870 3444 4018 4592 5166 574036 x 24 40 x 22 5.74 5.35 NC – – 15 22 28 34 38 43 47 51
34 x 26 48 x 20 CFM 599 1198 1797 2396 2995 3594 4193 4792 5391 599030 x 30 38 x 24 5.99 5.57 NC – – 15 22 28 34 39 43 47 51
Imperial Units
Performance DataModel 67FB45 Fixed Blade Return Grilles and Registers
E88
RETURN AIR/FILTER GRILLES AND REGISTERS
E
HO
SPIT
AL/
CLE
AN
RO
OM
DIF
FUSE
RS
E89
RETURN AIR/FILTER GRILLES AND REGISTERS
Listed Alternate Core Ak Core Velocity 100 200 300 400 500 600 700 800 900 1000Duct Size Size Area Factor VP .001 .002 .006 .010 .016 .022 .031 .040 .050 .062(inches) (inches) (sq. ft.) Neg. SP .003 .014 .031 .055 .086 .124 .168 .220 .278 .344
36 x 30 46 x 22 CFM 684 1368 2052 2736 3420 4104 4788 5472 6156 684032 x 32 38 x 28 6.84 6.34 NC – – 16 23 29 35 39 44 48 52
34 x 34 38 x 30 CFM 769 1538 2307 3076 3845 4614 5383 6152 6921 769048 x 24 36 x 32 48 x 28 7.69 7.13 NC – – 17 23 29 35 40 44 48 52
38 x 34 46 x 28 CFM 869 1738 2607 3476 4345 5214 6083 6952 7821 869036 x 36 42 x 30 48 x 26 8.69 8.02 NC – – 17 24 29 36 41 45 49 53
42 x 34 48 x 30 CFM 970 1940 2910 3880 4850 5820 6790 7760 8730 970038 x 38 44 x 34 9.70 8.94 NC – – 18 24 30 36 41 45 49 53
42 x 36 48 x 32 CFM 1077 2154 3231 4308 5385 6462 7539 8616 9693 1077040 x 40 46 x 34 10.77 9.90 NC – – 18 24 30 36 42 45 50 54
44 x 40 48 x 36 CFM 1189 2378 3567 4756 5945 7134 8323 9512 10701 1189042 x 42 46 x 38 11.89 10.92 NC – – 19 25 31 37 42 46 50 54
46 x 42 CFM 1307 2614 3921 5228 6535 7842 9149 10456 11763 1307044 x 44 13.07 11.98 NC – – 19 25 31 37 42 46 50 54
CFM 1430 2860 4290 5720 7150 8580 10010 11440 12870 1430046 x 46 14.30 13.10 NC – – 20 26 32 38 43 47 51 55
CFM 1559 3118 4677 6236 7795 9354 10913 12472 14031 1559048 x 48 15.59 14.26 NC – – 20 26 32 38 43 47 51 55
CFM - cubic feet per minute
VP - velocity pressure - inches w.g.
Neg. SP - negative static pressure - inches w.g.
NC - Noise Criteria values are based on 10 dB roomabsorption, re 10-12 watts.
Core Velocity is in feet per minute.
Performance Notes:1. Performance data is for grille with opposed bladedamper. Apply the following correction factors for grillewithout damper:
Neg. SP Listed Value x 0.91.
NC Listed value – 4.
2. Data derived from tests conducted in accordance withANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers,providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on theinlet face (a minimum of 4), while positioning probe asshown above, one inch out from the face.
3. Total the various velocity readings and divide by thenumber of readings taken to arrive at an average inletvelocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the averagevelocity by the appropriate Ak factor. Airflow (CFM) = Average velocity (Vk) x Ak.
1"(25)
Alnor Velometer with 2220A or 6070P Jet Probe
Air Measurement
Imperial Units
Performance DataModel 67FB45 Fixed Blade Return Grilles and Registers
E
HO
SPITA
L/CLEA
NRO
OM
DIFFU
SERS
E90
RETURN AIR/FILTER GRILLES AND REGISTERS
Metric Units
Listed Alternate Core Ak Core Velocity 0.51 1.01 1.52 2.03 2.54 3.05 3.55 4.06 4.57 5.08Duct Size Size Area Factor VP 0.2 0.5 1.5 2.5 4.0 5.5 7.7 10 12 15
(mm) (mm) (sq. m) Neg. SP 0.7 3.5 7.7 14 21 31 42 55 69 86203 x 102 L/S 9 19 28 38 47 57 66 76 85 94
152 x 152 254 x 102 .019 21 NC – – – – – 19 24 28 32 36254 x 127 L/S 13 26 40 53 66 79 92 106 119 132
203 x 152 305 x 102 .026 28 NC – – – – 15 20 25 29 33 37305 x 127 L/S 17 33 50 66 83 99 116 132 149 165
254 x 152 406 x 102 .033 34 NC – – – – 16 21 26 30 34 38L/S 18 36 54 72 90 108 126 143 161 179
203 x 203 356 x 127 .035 37 NC – – – – 17 22 27 31 35 39L/S 20 40 59 79 99 119 139 159 178 198
305 x 152 457 x 102 .039 42 NC – – – – 18 23 27 32 36 40406 x 152 L/S 27 55 82 109 137 164 192 219 246 274
305 x 203 610 x 102 .054 55 NC – – – – 19 24 28 33 37 41356 x 178 L/S 29 58 86 115 144 173 202 230 259 288
254 x 254 660 x 102 .057 58 NC – – – – 19 24 29 34 37 41356 x 203 762 x 102 L/S 31 61 92 123 153 184 215 245 276 307
457 x 152 711 x 102 .060 62 NC – – – 15 20 25 30 34 38 41406 x 203 508 x 152 L/S 35 70 105 140 175 210 244 279 314 349
305 x 254 610 x 127 .069 69 NC – – – 15 20 25 30 35 39 42356 x 254 610 x 152 L/S 42 85 127 170 212 255 297 340 382 425
305 x 305 457 x 203 965 x 102 .084 83 NC – – – 16 21 26 31 36 39 42406 x 305 610 x 203 L/S 59 117 176 234 293 351 410 468 527 585
356 x 356 508 x 254 864 x 152 .115 113 NC – – – 16 21 26 31 36 40 43406 x 356 711 x 203 L/S 65 129 194 259 323 388 453 517 582 647
457 x 305 559 x 254 965 x 152 .127 125 NC – – – 17 22 27 32 37 40 43508 x 305 L/S 72 143 215 287 359 430 502 574 646 717
610 x 254 762 x 203 .141 139 NC – – – 17 22 27 32 38 41 44457 x 356 762 x 203 L/S 77 155 232 310 387 464 542 619 697 774
406 x 406 559 x 305 .152 147 NC – – – 18 23 28 33 38 41 44457 x 406 762 x 254 L/S 87 175 262 349 437 524 611 698 786 873
610 x 305 508 x 356 914 x 203 .172 165 NC – – – 18 23 28 33 38 41 45508 x 406 711 x 305 L/S 99 198 297 396 495 595 694 793 892 991
457 x 457 610 x 356 813 x 254 .195 187 NC – – – 18 23 29 34 39 42 45508 x 457 660 x 356 L/S 109 219 328 438 547 657 766 876 985 1095
762 x 305 559 x 406 914 x 254 .216 207 NC – – – 19 24 29 34 39 42 46610 x 457 762 x 356 L/S 123 246 369 493 616 739 862 985 1108 1232
508 x 508 660 x 406 914 x 305 .242 231 NC – – – 19 24 30 35 40 43 46610 x 508 762 x 406 L/S 150 299 449 598 748 898 1047 1197 1346 1496
559 x 559 660 x 457 914 x 356 .294 279 NC – – – 20 25 31 35 40 43 47610 x 559 1016 x 356 L/S 167 334 501 668 835 1002 1169 1336 1503 1671
762 x 457 863 x 406 .329 310 NC – – – 20 25 31 36 41 44 48660 x 559 813 x 457 L/S 179 358 537 715 894 1073 1252 1431 1610 1789
610 x 610 711 x 508 914 x 406 .352 331 NC – – – 20 25 31 36 41 44 48813 x 508 1168 x 356 L/S 202 403 605 806 1008 1209 1411 1612 1814 2015
914 x 457 1016 x 406 .397 373 NC – – – 21 26 32 37 42 45 49711 x 610 L/S 211 422 633 844 1055 1266 1477 1688 1898 2109
660 x 660 1219 x 356 .415 390 NC – – – 21 26 32 37 42 45 49711 x 660 914 x 508 L/S 225 450 675 900 1125 1351 1576 1801 2026 2251
762 x 610 813 x 559 1016 x 457 .443 415 NC – – 15 22 27 33 38 42 46 50762 x 660 1016 x 508 L/S 245 491 736 982 1227 1472 1718 1963 2208 2454
711 x 711 914 x 559 .483 451 NC – – 15 22 27 33 38 43 46 50762 x 711 1118 x 508 L/S 271 542 813 1083 1354 1625 1896 2167 2438 2709
914 x 610 1016 x 559 .533 497 NC – – 15 22 28 34 38 43 47 51864 x 660 1219 x 508 L/S 283 565 848 1131 1413 1696 1979 2261 2544 2827
762 x 762 965 x 610 .556 518 NC – – 15 22 28 34 39 43 47 51
Performance DataModel 67FB45 Fixed Blade Return Grilles and Registers
E
HO
SPIT
AL/
CLE
AN
RO
OM
DIF
FUSE
RS
E91
RETURN AIR/FILTER GRILLES AND REGISTERS
L/S - litres per second
VP - velocity pressure - Pa
Neg. SP - negative static pressure - Pa
NC - Noise Criteria values are based on 10 dB room absorption, re 10-12 watts.
Core Velocity is in meters per second.
Performance Notes:1. Performance data is for grille with opposed bladedamper. Apply the following correction factors for grillewithout damper:
Neg. SP Listed Value x 0.91.
NC Listed value – 4.
2. Data derived from tests conducted in accordance withANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers,providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on theinlet face (a minimum of 4), while positioning probe asshown above, one inch out from the face.
3. Total the various velocity readings and divide by thenumber of readings taken to arrive at an average inletvelocity (Vk in m/s).
4. Calculate the airflow (L/S) by multiplying the averagevelocity by the appropriate Ak factor. Airflow (L/S) = Average velocity (Vk) x Ak.
1"(25)
Alnor Velometer with 2220A or 6070P Jet Probe
Air Measurement
Metric Units
Listed Alternate Core Ak Core Velocity 0.51 1.01 1.52 2.03 2.54 3.05 3.55 4.06 4.57 5.08Duct Size Size Area Factor VP 0.2 0.5 1.5 2.5 4.0 5.5 7.7 10 12 15
(mm) (mm) (sq. m) Neg. SP 0.7 3.5 7.7 14 21 31 42 55 69 86914 x 762 1168 x 559 L/S 323 646 968 1291 1614 1937 2259 2582 2905 3228
813 x 813 965 x 711 .635 589 NC – – 16 23 29 35 39 44 48 52864 x 864 965 x 762 L/S 363 726 1089 1452 1814 2177 2540 2903 3266 3629
1219 x 610 914 x 813 1219 x 711 .714 663 NC – – 17 23 29 35 40 44 48 52965 x 864 1168 x 711 L/S 410 820 1230 1640 2050 2460 2871 3281 3691 4101
914 x 914 1067 x 762 1219 x 660 .807 746 NC – – 17 24 29 36 41 45 49 531067 x 864 1219 x 762 L/S 458 915 1373 1831 2289 2746 3204 3662 4120 4577
965 x 965 1118 x 864 .901 831 NC – – 18 24 30 36 41 45 49 531067 x 914 1219 x 813 L/S 508 1016 1525 2033 2541 3049 3558 4066 4574 5082
1016 x 1016 1168 x 864 1.00 920 NC – – 18 24 30 36 42 45 50 541118 x 1016 1219 x 914 L/S 561 1122 1683 2244 2805 3367 3928 4489 5050 5611
1067 x 1067 1168 x 965 1.10 1015 NC – – 19 25 31 37 42 46 50 541168 x 1067 L/S 617 1234 1850 2467 3084 3701 4317 4934 5551 6168
1118 x 1118 1.21 1114 NC – – 19 25 31 37 42 46 50 54L/S 675 1350 2024 2699 3374 4049 4724 5399 6073 6748
1168 x 1168 1.33 1218 NC – – 20 26 32 38 43 47 51 55L/S 736 1471 2207 2943 3678 4414 5150 5886 6621 7357
1219 x 1219 1.45 1326 NC – – 20 26 32 38 43 47 51 55
Performance DataModel 67FB45 Fixed Blade Return Grilles and Registers
E
HO
SPITA
L/CLEA
NRO
OM
DIFFU
SERS
Listed Alternate Core Ak Core Velocity 100 200 300 400 500 600 700 800 900 1000Duct Size Size Area Factor VP .001 .002 .006 .010 .016 .022 .031 .040 .050 .062(inches) (inches) (sq. ft.) Neg. SP .005 .018 .041 .073 .114 .164 .223 .292 .369 .456
8 x 4 CFM 20 40 60 80 100 120 140 160 180 2006 x 6 10 x 4 0.20 0.23 NC – – – – 16 21 26 30 34 38
10 x 5 CFM 28 56 84 112 140 168 196 224 252 2808 x 6 12 x 4 0.28 0.30 NC – – – – 17 22 27 31 35 39
12 x 5 CFM 35 70 105 140 175 210 245 280 315 35010 x 6 16 x 4 0.35 0.37 NC – – – – 18 23 28 32 36 40
CFM 38 76 114 152 190 228 266 304 342 3808 x 8 14 x 5 0.38 0.40 NC – – – – 19 24 29 33 37 41
CFM 42 84 126 168 210 252 294 336 378 42012 x 6 18 x 4 0.42 0.45 NC – – – 15 20 25 29 34 38 42
16 x 6 CFM 58 116 174 232 290 348 406 464 522 58012 x 8 24 x 4 0.58 0.59 NC – – – 16 21 26 30 35 39 43
14 x 7 CFM 61 122 183 244 305 366 427 488 549 61010 x 10 26 x 4 0.61 0.62 NC – – – 16 21 26 31 36 39 43
14 x 8 30 x 4 CFM 65 130 195 260 325 390 455 520 585 65018 x 6 28 x 4 0.65 0.67 NC – – – 17 22 27 32 36 40 43
16 x 8 20 x 6 CFM 74 148 222 296 370 444 518 592 666 74012 x 10 24 x 5 0.74 0.74 NC – – – 17 22 27 32 37 41 44
14 x 10 24 x 6 CFM 90 180 270 360 450 540 630 720 810 90012 x 12 18 x 8 38 x 4 0.90 0.89 NC – – – 18 23 28 33 38 41 44
16 x 12 24 x 8 CFM 124 248 372 496 620 744 868 992 1116 124014 x 14 20 x 10 34 x 6 1.24 1.22 NC – – – 18 23 28 33 38 42 45
16 x 14 28 x 8 CFM 137 274 411 548 685 822 959 1096 1233 137018 x 12 22 x 10 38 x 6 1.37 1.34 NC – – 15 20 25 30 35 40 43 46
20 x 12 CFM 152 304 456 608 760 912 1064 1216 1368 152024 x 10 30 x 8 1.52 1.49 NC – – 15 20 25 30 35 41 44 47
18 x 14 30 x 8 CFM 164 328 492 656 820 984 1148 1312 1476 164016 x 16 22 x 12 1.64 1.58 NC – – 16 21 26 31 36 41 44 47
18 x 16 30 x 10 CFM 185 370 555 740 925 1110 1295 1480 1665 185024 x 12 20 x 14 36 x 8 1.85 1.78 NC – – 16 21 26 31 36 41 44 48
20 x 16 28 x 12 CFM 210 420 630 840 1050 1260 1470 1680 1890 210018 x 18 24 x 14 32 x 10 2.10 2.01 NC – – 16 21 26 32 37 42 45 48
20 x 18 26 x 14 CFM 232 464 696 928 1160 1392 1624 1856 2088 232030 x 12 22 x 16 36 x 10 2.32 2.23 NC – – 16 22 27 32 37 42 45 49
24 x 18 30 x 14 CFM 261 522 783 1044 1305 1566 1827 2088 2349 261020 x 20 26 x 16 36 x 12 2.61 2.48 NC – – 16 22 27 33 38 43 46 49
24 x 20 30 x 16 CFM 317 634 951 1268 1585 1902 2219 2536 2853 317022 x 22 26 x 18 36 x 14 3.17 3.00 NC – – 17 23 28 34 38 43 46 50
24 x 22 40 x 14 CFM 354 708 1062 1416 1770 2124 2478 2832 3186 354030 x 18 34 x 16 3.54 3.34 NC – – 17 23 28 34 39 44 47 51
26 x 22 32 x 18 CFM 379 758 1137 1516 1895 2274 2653 3032 3411 379024 x 24 28 x 20 36 x 16 3.79 3.56 NC – – 17 23 28 34 39 44 47 51
32 x 20 46 x 14 CFM 427 854 1281 1708 2135 2562 2989 3416 3843 427036 x 18 40 x 16 4.27 4.01 NC – – 18 25 29 36 41 46 49 53
28 x 24 CFM 447 894 1341 1788 2235 2682 3129 3576 4023 447026 x 26 48 x 14 4.47 4.19 NC – – 18 25 30 36 41 46 49 53
28 x 26 36 x 20 CFM 477 954 1431 1908 2385 2862 3339 3816 4293 477030 x 24 32 x 22 40 x 18 4.77 4.46 NC – – 19 26 31 37 42 46 50 54
30 x 26 40 x 20 CFM 520 1040 1560 2080 2600 3120 3640 4160 4680 520028 x 28 36 x 22 5.20 4.85 NC – – 19 26 31 37 42 47 50 54
30 x 28 44 x 20 CFM 574 1148 1722 2296 2870 3444 4018 4592 5166 574036 x 24 40 x 22 5.74 5.35 NC – – 19 26 32 38 42 47 51 55
34 x 26 48 x 20 CFM 599 1198 1797 2396 2995 3594 4193 4792 5391 599030 x 30 38 x 24 5.99 5.57 NC – – 19 26 32 38 43 47 51 55
Imperial Units
Performance DataModel 67FB55 Fixed Blade Return Grilles and Registers
E94
RETURN AIR/FILTER GRILLES AND REGISTERS
E
HO
SPIT
AL/
CLE
AN
RO
OM
DIF
FUSE
RS
E95
RETURN AIR/FILTER GRILLES AND REGISTERS
Listed Alternate Core Ak Core Velocity 100 200 300 400 500 600 700 800 900 1000Duct Size Size Area Factor VP .001 .002 .006 .010 .016 .022 .031 .040 .050 .062(inches) (inches) (sq. ft.) Neg. SP .005 .018 .041 .073 .114 .164 .223 .292 .369 .456
36 x 30 46 x 22 CFM 684 1368 2052 2736 3420 4104 4788 5472 6156 684032 x 32 38 x 28 6.84 6.34 NC – 15 20 27 33 39 43 48 52 56
34 x 34 38 x 30 CFM 769 1538 2307 3076 3845 4614 5383 6152 6921 769048 x 24 36 x 32 48 x 28 7.69 7.13 NC – 16 21 27 33 39 44 48 52 56
38 x 34 46 x 28 CFM 869 1738 2607 3476 4345 5214 6083 6952 7821 869036 x 36 42 x 30 48 x 26 8.69 8.02 NC – 17 21 28 33 40 45 49 53 57
42 x 34 48 x 30 CFM 970 1940 2910 3880 4850 5820 6790 7760 8730 970038 x 38 44 x 34 9.70 8.94 NC – 18 22 28 34 40 45 49 53 57
42 x 36 48 x 32 CFM 1077 2154 3231 4308 5385 6462 7539 8616 9693 1077040 x 40 46 x 34 10.77 9.90 NC – 18 23 29 35 41 47 50 55 59
44 x 40 48 x 36 CFM 1189 2378 3567 4756 5945 7134 8323 9512 10701 1189042 x 42 46 x 38 11.89 10.92 NC – 19 24 30 36 42 47 51 55 59
46 x 42 CFM 1307 2614 3921 5228 6535 7842 9149 10456 11763 1307044 x 44 13.07 11.98 NC – 19 24 30 36 42 47 51 55 59
CFM 1430 2860 4290 5720 7150 8580 10010 11440 12870 1430046 x 46 14.30 13.10 NC 15 20 25 31 37 43 48 52 56 60
CFM 1559 3118 4677 6236 7795 9354 10913 12472 14031 1559048 x 48 15.59 14.26 NC 15 20 25 31 37 43 48 52 56 60
CFM - cubic feet per minute
VP - velocity pressure - inches w.g.
Neg. SP - negative static pressure - inches w.g.
NC - Noise Criteria values are based on 10 dB room absorption, re 10-12 watts.
Core Velocity is in feet per minute.
Performance Notes:1. Performance data is for grille with opposed bladedamper. Apply the following correction factors for grillewithout damper:
Neg. SP Listed Value x 0.91.
NC Listed value – 4.
2. Data derived from tests conducted in accordance withANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers,providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on theinlet face (a minimum of 4), while positioning probe asshown above, one inch out from the face.
3. Total the various velocity readings and divide by thenumber of readings taken to arrive at an average inletvelocity (Vk in FPM).
4. Calculate the airflow (CFM) by multiplying the averagevelocity by the appropriate Ak factor. Airflow (CFM) = Average velocity (Vk) x Ak.
1"(25)
Alnor Velometer with 2220A or 6070P Jet Probe
Air Measurement
Imperial Units
Performance DataModel 67FB55 Fixed Blade Return Grilles and Registers
E
HO
SPITA
L/CLEA
NRO
OM
DIFFU
SERS
E96
RETURN AIR/FILTER GRILLES AND REGISTERS
Metric Units
Listed Alternate Core Ak Core Velocity 0.51 1.01 1.52 2.03 2.54 3.05 3.55 4.06 4.57 5.08Duct Size Size Area Factor VP 0.2 0.5 1.5 2.5 4.0 5.5 7.7 10 12 15
(mm) (mm) (sq. m) Neg. SP 0.7 3.5 7.7 14 21 31 42 55 69 86203 x 102 L/S 9 19 28 38 47 57 66 76 85 94
152 x 152 254 x 102 .019 21 NC – – – – 16 21 26 30 34 38254 x 127 L/S 13 26 40 53 66 79 92 106 119 132
203 x 152 305 x 102 .026 28 NC – – – – 17 22 27 31 35 39305 x 127 L/S 17 33 50 66 83 99 116 132 149 165
254 x 152 406 x 102 .033 34 NC – – – – 18 23 28 32 36 40L/S 18 36 54 72 90 108 126 143 161 179
203 x 203 356 x 127 .035 37 NC – – – – 19 24 29 33 37 41L/S 20 40 59 79 99 119 139 159 178 198
305 x 152 457 x 102 .039 42 NC – – – 15 20 25 29 34 38 42406 x 152 L/S 27 55 82 109 137 164 192 219 246 274
305 x 203 610 x 102 .054 55 NC – – – 16 21 26 30 35 39 43356 x 178 L/S 29 58 86 115 144 173 202 230 259 288
254 x 254 660 x 102 .057 58 NC – – – 16 21 26 31 36 39 43356 x 203 762 x 102 L/S 31 61 92 123 153 184 215 245 276 307
457 x 152 711 x 102 .060 62 NC – – – 17 22 27 32 36 40 43406 x 203 508 x 152 L/S 35 70 105 140 175 210 244 279 314 349
305 x 254 610 x 127 .069 69 NC – – – 17 22 27 32 37 41 44356 x 254 610 x 152 L/S 42 85 127 170 212 255 297 340 382 425
305 x 305 457 x 203 965 x 102 .084 83 NC – – – 18 23 28 33 38 41 44406 x 305 610 x 203 L/S 59 117 176 234 293 351 410 468 527 585
356 x 356 508 x 254 864 x 152 .115 113 NC – – – 18 23 28 33 38 42 45406 x 356 711 x 203 L/S 65 129 194 259 323 388 453 517 582 647
457 x 305 559 x 254 965 x 152 .127 125 NC – – 15 20 25 30 35 40 43 46508 x 305 L/S 72 143 215 287 359 430 502 574 646 717
610 x 254 762 x 203 .141 139 NC – – 15 20 25 30 35 41 44 47457 x 356 762 x 203 L/S 77 155 232 310 387 464 542 619 697 774
406 x 406 559 x 305 .152 147 NC – – 16 21 26 31 36 41 44 47457 x 406 762 x 254 L/S 87 175 262 349 437 524 611 698 786 873
610 x 305 508 x 356 914 x 203 .172 165 NC – – 16 21 26 31 36 41 44 48508 x 406 711 x 305 L/S 99 198 297 396 495 595 694 793 892 991
457 x 457 610 x 356 813 x 254 .195 187 NC – – 16 21 26 32 37 42 45 48508 x 457 660 x 356 L/S 109 219 328 438 547 657 766 876 985 1095
762 x 305 559 x 406 914 x 254 .216 207 NC – – 16 22 27 32 37 42 45 49610 x 457 762 x 356 L/S 123 246 369 493 616 739 862 985 1108 1232
508 x 508 660 x 406 914 x 305 .242 231 NC – – 16 22 27 33 38 43 46 49610 x 508 762 x 406 L/S 150 299 449 598 748 898 1047 1197 1346 1496
559 x 559 660 x 457 914 x 356 .294 279 NC – – 17 23 28 34 38 43 46 50610 x 559 1016 x 356 L/S 167 334 501 668 835 1002 1169 1336 1503 1671
762 x 457 863 x 406 .329 310 NC – – 17 23 28 34 39 44 47 51660 x 559 813 x 457 L/S 179 358 537 715 894 1073 1252 1431 1610 1789
610 x 610 711 x 508 914 x 406 .352 331 NC – – 17 23 28 34 39 44 47 51813 x 508 1168 x 356 L/S 202 403 605 806 1008 1209 1411 1612 1814 2015
914 x 457 1016 x 406 .397 373 NC – – 18 25 29 36 41 46 49 53711 x 610 L/S 211 422 633 844 1055 1266 1477 1688 1898 2109
660 x 660 1219 x 356 .415 390 NC – – 18 25 30 36 41 46 49 53711 x 660 914 x 508 L/S 225 450 675 900 1125 1351 1576 1801 2026 2251
762 x 610 813 x 559 1016 x 457 .443 415 NC – – 19 26 31 37 42 46 50 54762 x 660 1016 x 508 L/S 245 491 736 982 1227 1472 1718 1963 2208 2454
711 x 711 914 x 559 .483 451 NC – – 19 26 31 37 42 47 50 54762 x 711 1118 x 508 L/S 271 542 813 1083 1354 1625 1896 2167 2438 2709
914 x 610 1016 x 559 .533 497 NC – – 19 26 32 38 42 47 51 55864 x 660 1219 x 508 L/S 283 565 848 1131 1413 1696 1979 2261 2544 2827
762 x 762 965 x 610 .556 518 NC – – 19 26 32 38 43 47 51 55
Performance DataModel 67FB55 Fixed Blade Return Grilles and Registers
E
HO
SPIT
AL/
CLE
AN
RO
OM
DIF
FUSE
RS
E97
RETURN AIR/FILTER GRILLES AND REGISTERS
L/S - litres per second
VP - velocity pressure - Pa
Neg. SP - negative static pressure - Pa
NC - Noise Criteria values are based on 10 dB room absorption, re 10-12 watts.
Core Velocity is in meters per second.
Performance Notes:1. Performance data is for grille with opposed bladedamper. Apply the following correction factors for grillewithout damper:
Neg. SP Listed Value x 0.91.
NC Listed value – 4.
2. Data derived from tests conducted in accordance withANSI/ASHRAE Standard 70 – 2006.
Airflow Measurements1. Balancing factors are applicable with or without dampers,providing uniform airflow exists into grille or register.
2. Take velocity readings at a number of locations on theinlet face (a minimum of 4), while positioning probe asshown above, one inch out from the face.
3. Total the various velocity readings and divide by thenumber of readings taken to arrive at an average inletvelocity (Vk in m/s).
4. Calculate the airflow (L/S) by multiplying the averagevelocity by the appropriate Ak factor. Airflow (L/S) = Average velocity (Vk) x Ak.
1"(25)
Alnor Velometer with 2220A or 6070P Jet Probe
Air Measurement
Metric Units
Listed Alternate Core Ak Core Velocity 0.51 1.01 1.52 2.03 2.54 3.05 3.55 4.06 4.57 5.08Duct Size Size Area Factor VP 0.2 0.5 1.5 2.5 4.0 5.5 7.7 10 12 15
(mm) (mm) (sq. m) Neg. SP 0.7 3.5 7.7 14 21 31 42 55 69 86914 x 762 1168 x 559 L/S 323 646 968 1291 1614 1937 2259 2582 2905 3228
813 x 813 965 x 711 .635 589 NC – 15 20 27 33 39 43 48 52 56864 x 864 965 x 762 L/S 363 726 1089 1452 1814 2177 2540 2903 3266 3629
1219 x 610 914 x 813 1219 x 711 .714 663 NC – 16 21 27 33 39 44 48 52 56965 x 864 1168 x 711 L/S 410 820 1230 1640 2050 2460 2871 3281 3691 4101
914 x 914 1067 x 762 1219 x 660 .807 746 NC – 17 21 28 33 40 45 49 53 571067 x 864 1219 x 762 L/S 458 915 1373 1831 2289 2746 3204 3662 4120 4577
965 x 965 1118 x 864 .901 831 NC – 18 22 28 34 40 45 49 53 571067 x 914 1219 x 813 L/S 508 1016 1525 2033 2541 3049 3558 4066 4574 5082
1016 x 1016 1168 x 864 1.00 920 NC – 18 23 29 35 41 47 50 55 591118 x 1016 1219 x 914 L/S 561 1122 1683 2244 2805 3367 3928 4489 5050 5611
1067 x 1067 1168 x 965 1.10 1015 NC – 19 24 30 36 42 47 51 55 591168 x 1067 L/S 617 1234 1850 2467 3084 3701 4317 4934 5551 6168
1118 x 1118 1.21 1114 NC – 19 24 30 36 42 47 51 55 59L/S 675 1350 2024 2699 3374 4049 4724 5399 6073 6748
1168 x 1168 1.33 1218 NC 15 20 25 31 37 43 48 52 56 60L/S 736 1471 2207 2943 3678 4414 5150 5886 6621 7357
1219 x 1219 1.45 1326 NC 15 20 25 31 37 43 48 52 56 60
Performance DataModel 67FB55 Fixed Blade Return Grilles and Registers
E
HO
SPITA
L/CLEA
NRO
OM
DIFFU
SERS