SUBMITTAL DATA: SEZ-KD09NA4 & SUZ-KA09NA2 · SEZ-KD09NA4.TH SEZ-KD09NAR1.TH SEZ-KD09NA4R1.TH...
Transcript of SUBMITTAL DATA: SEZ-KD09NA4 & SUZ-KA09NA2 · SEZ-KD09NA4.TH SEZ-KD09NAR1.TH SEZ-KD09NA4R1.TH...
Job Name:
System Reference: Date:
APPLIES TO INDOOR UNIT:□ SEZ-KD09NA4.TH□ SEZ-KD09NAR1.TH□ SEZ-KD09NA4R1.TH
Outdoor Unit:SUZ-KA09NA2
INDOOR UNIT FEATURES• Concealed horizontal-ducted unit for applications with short duct runs• Quiet operation• Ultra-thin body: 7-7/8" high • Built-in condensate lift mechanism (lifts to 21-21/32")• Multiple control options available:
- kumo cloud® smart device app for remote access- Third-party interface options- Wired or wireless controllers
• Static capability up to 0.20 in. WG
OUTDOOR UNIT FEATURES• Variable speed INVERTER-driven compressor• Innovative Joint Lap DC Motor leads to high efficiency and reliability• Pulse Amplitude Modulation technology• High-performance grooved piping for increased heat exchange efficiency
SUBMITTAL DATA: SEZ-KD09NA4 & SUZ-KA09NA29,000 BTU/H HORIZONTAL-DUCTED HEAT PUMP SYSTEMS
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
M-SERIES
Cooling at 95°F1
Maximum Capacity Btu/h 9,000
Rated Capacity Btu/h 9,000
Minimum Capacity Btu/h 3,900
Maximum Power Input W 700
Rated Power Input W 700
Moisture Removal Pints/h 1.5
Sensible Heat Factor 0.82
Power Factor (208/230V) % 89
Cooling at 82°F
Maximum Capacity Btu/h 9,600
Rated Capacity Btu/h 9,600
Minimum Capacity Btu/h 4,300
Maximum Power Input W 600
Rated Power Input W 600
Heating at 47°F2
Maximum Capacity Btu/h 12,800
Rated Capacity Btu/h 12,000
Minimum Capacity Btu/h 4,200
Maximum Power Input W 1,240
Rated Power Input W 1,100
Power Factor % 95
Heating at 17°F3
Maximum Capacity Btu/h 7,600
Rated Capacity Btu/h 7,600
Maximum Power Input W 880
Rated Power Input W 880
Heating at 5°F4Maximum Capacity Btu/h 6,000
Maximum Power Input W 720
Heating at -4°F5 Maximum Capacity Btu/h 4,400
Efficiency
SEER 18.8
EER1 12.8
HSPF (IV) 11.0
COP at 47°F2 3.20
COP at 17°F in Maximum Capacity3 2.53
COP at 5°F in Maximum Capacity4 2.44
ENERGY STAR® Certified (ENERGY STAR products are third-party certified byan EPA-recognized Certification Body.)
Yes
Electrical
Voltage, Phase, Frequency 208/230V, 1 phase, 60Hz
Guaranteed Voltage Range V AC 187-253
Voltage: Indoor - Outdoor, S1-S2 V AC 208/230
Voltage: Indoor - Outdoor, S2-S3 V DC 24
Voltage: Indoor - Remote Controller V DC 12
Recommended Fuse/Breaker Size A 15
Recommended Wire Size (Indoor - Outdoor) AWG 14
SPECIFICATIONS: SEZ-KD09NA4 & SUZ-KA09NA2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Indoor Unit
MCA A 1
Fan Motor Full Load Amperage A 0.51
Fan Motor Output W 96
Airflow Rate at Cooling, Dry CFM 317-247-194
Airflow Rate at Cooling, Wet CFM 285-222-174
Airflow Rate at Heating, Dry CFM 317-247-194
Sound Pressure Level (Cooling) dB(A) 30-26-23
Sound Pressure Level (Heating) dB(A) 30-26-23
External Static Pressure in.WG 0.02-0.06-0.14-0.20
Drain Pipe Size In. (mm) 1-1/4 (32)
Condensate Lift Mechanism, Maximum Distance In. (mm) 21-21/32 (550)
Heat Exchanger Type Plate fin coil
External Finish Color Galvanized
Unit Dimensions
W: In. (mm) 31 1/8 (790)
D: In. (mm) 27-9/16 (700)
H: In. (mm) 7-7/8 (200)
Package Dimensions
W: In. (mm) 39-3/8 (1,000)
D: In. (mm) 35-7/16 (900)
H: In. (mm) 14-3/16 (360)
Unit Weight Lbs. (kg) 42 (19)
Package Weight Lbs. (kg) 64 (29)
Indoor Unit OperatingTemperature Range
Cooling Intake Air Temp (Maximum / Minimum)* °F 95F D.B / 71F W.B // 67F D.B / 57F W.B
Heating Intake Air Temp (Maximum / Minimum) °F 80F D.B // 70F D.B
Outdoor Unit
MCA A 9
MOCP A 15
Fan Motor Full Load Amperage A 0.5
Fan Motor Output W 55
Airflow Rate CFM 1,229 / 1,172
Refrigerant Control LEV
Defrost Method Reverse cycle
Heat Exchanger Type Plate fin coil
Blue Fin Coating on Heat Exchanger Yes
Sound Pressure Level, Cooling1 dB(A) 48
Sound Pressure Level, Heating2 dB(A) 50
Compressor Type DC INVERTER-driven
Compressor Model KNB073FRVMC
Compressor Rated Load Amps A 6.2
Compressor Locked Rotor Amps A 7.7
Compressor Oil Type // Charge oz. FV50S //9.1
External Finish Color Ivory Munsell 3Y 7.8/1.1
Base Pan Heater Optional
SPECIFICATIONS: SEZ-KD09NA4 & SUZ-KA09NA2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Unit Dimensions
W: In. (mm) 31-1/2 (800)
D: In. (mm) 11-1/4 (285)
H: In. (mm) 21-5/8 (550)
Package Dimensions
W: In. (mm) 37 (940)
D: In. (mm) 14-15/16 (380)
H: In. (mm) 24-13/16 (630)
Unit Weight Lbs. (kg) 81 (37)
Package Weight Lbs. (kg) 88 (40)
Outdoor Unit OperatingTemperature Range
Cooling Air Temp (Maximum / Minimum)* °F 115 / 14
Cooling Thermal Lock-out / Re-start Temperatures** °F -1 / 3
Heating Air Temp (Maximum / Minimum) °F 75 / -4
Heating Thermal Lock-out / Re-start Temperatures** °F -9 / -4
RefrigerantType R410A
Charge Lbs, oz 2, 5
Piping
Gas Pipe Size O.D. (Flared) In.(mm) 3/8 (9.52)
Liquid Pipe Size O.D. (Flared) In.(mm) 1/4 (6.35)
Maximum Piping Length Ft. (m) 65
Maximum Height Difference Ft. (m) 40
Maximum Number of Bends 10
Notes
AHRI Rated Conditions(Rated data isdetermined at a fixedcompressor speed)
1Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB2Heating at 47°F (Indoor // Outdoor) °F 70 DB, 60 WB // 47 DB, 43 WB3Heating at 17°F (Indoor // Outdoor) °F 70 DB, 60 WB // 17 DB, 15 WB
Conditions4Heating at 5°F (Indoor // Outdoor) °F 70 DB, 60 WB // 5 DB, 4 WB5Heating at -4°F (Indoor // Outdoor) °F 70 DB, 60 WB // -4 DB, -5 WB
*Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.**System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.
SPECIFICATIONS: SEZ-KD09NA4 & SUZ-KA09NA2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Filter Box with MERV 8 Filters □ FBL 1-1
Wireless Signal Receiver □ PAR-SA9CA-E
Wireless Signal Receiver □ PAR-FA32MA-W
Wireless Signal Receiver □ PAR-FA32MA-E
Wireless Remote Controller □ PAR-FL32MA-E
Backlit, Wall-mounted, Wireless Controller □ MHK1
Portable Central Controller □ MCCH1
Wired MA Controller □ PAR-33MAA
Simple MA Controller □ PAC-YT53CRAU
Touch MA Controller □ PAR-CT01MAU-SB
Wired Remote Sensor □ PAC-SE41TS-E
Wireless Temperature and Humidity Sensor □ PAC-USWHS003-TH-1
Outside Air Sensor for MHK1 □ MOS1
Flush Mount Remote Temperature Sensor □ PAC-USSEN001-FM-1
System Control Interface □ MAC-333IF-E
Wireless Interface □ PAC-USWHS002-WF-1
Thermostat Interface □ PAC-US444CN-1
kumo station® □ PAC-WHS01HC-E
USNAP Interface □ PAC-WHS01UP-E
IT Extender □ PAC-WHS01IE-E
BACnet® and MODBUS® Interface □ PAC-UKPRC001-CN-1
External Fan / Heater Control Relay Adapter □ CN24RELAY-KIT-CM3
Wire for Remote on/off with CN32 connector □ PAC-715AD
Connector and wire for Operation status/error using CN51 □ PAC-725AD
Connector cable for remote display □ PAC-SA88HA-EP
Remote Operation Adapter1 □ PAC-SF40RM-E
3D i-see Sensor™ Corner Panel □ PAC-SF1ME-E
Grille with 3D i-see Sensor™ □ SLP-18FAEU
Installation/Trim Panels □ PLFY-ITP2
Space Panel □ PAC-SJ38AS-E
Bottom Return Plate (Converts low-profile ducted indoor unit from rear return to bottom return) □ BRP-1
External Drain Pump □ PAC-KE07DM-E
Blue Diamond Sensor Extension Cable — 15 Ft. □ C13-103
Blue Diamond Alarm Extension Cable — 6.5 Ft. □ C13-192
Blue Diamond MultiTank — collection tank for use with multiple pumps □ C21-014
Blue Diamond Rubber Foot Pads □ F10-010
Mini Condensate Pump — 230 volt application □ SI30-230
Advanced Blue Diamond Mini Condensate Pump w/ Reservoir & Sensor (208/230V) [recommended] □ X87-721 - 208/230V
Drain Pan Level Sensor □ DPLS2
(30A/600V/UL) [fits 2" X 4" utility box] - Black □ TAZ-MS303
ACCESSORIES: SEZ-KD09NA4
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
(30A/600V/UL) [fits 2" X 4" utility box] - White □ TAZ-MS303W1 Unable to use with wireless remote controller
Air Outlet Guide □ MAC-881SG
Optional Defrost Heater □ MAC-640BH-U
Hail Guard □ HG-B4
Outdoor Unit 3-1/4 inch Mounting Base (Pair) - Plastic □ DSD-400P
Condensing Unit Mounting Pad 16" x 36" x 3" □ ULTRILITE1
Outdoor Unit Stand — 12" High □ QSMS1201M
Outdoor Unit Stand — 18" High □ QSMS1801M
Outdoor Unit Stand — 24" High □ QSMS2401M
Heavy Duty Wall Mounting Bracket— Coated Steel □ QSWB2000M-1
Heavy Duty Wall Mounting Bracket — 316 Series Stainless Steel □ QSWBSS
15' x 1/4" x 15' / 3/8" Lineset (Twin-Tube Insulation) □ MLS143812T-15
30' x 1/4" x 30' / 3/8" Lineset (Twin-Tube Insulation) □ MLS143812T-30
50' x 1/4" x 50' / 3/8" Lineset (Twin-Tube Insulation) □ MLS143812T-50
65' x 1/4" x 65' / 3/8" Lineset (Twin-Tube Insulation) □ MLS143812T-65
ACCESSORIES: SUZ-KA09NA2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
(46-7/8)1190
(39)990
(31-1/8)790
N
(48-25/32)1239
(40-29/32)1039
(33-1/16)839
M
Drain pipe(O.D.ø32(1-1/4))
Terminal block (Remote controller transmission line)
Terminal block (Indoor/outdoor connecting line)
2 Refrigerant pipingflare connection (liquid)
ø12.7(1/2)
mm(in.)
(35-7/16)
(27-9/16)
(19-11/16)
(41-3/4)
(33-7/8)
(26)
(47-1/4)
(39-3/8)
(31-1/2)
(39-3/8)
(31-1/2)
(23-5/8)
(41-3/4)
(33-7/8)
(26)
(47-3/16)
(39-5/16)
(31-7/16)
(45-3/8)
(37-1/2)
(29-5/8)
(43-5/16)
(35-7/16)
(27-9/16)700
Drain pipe(O.D.ø32(1-1/4))(Emergency draining)
ø6.35(1/4)
ø9.52(3/8)
SEZ-KD15NA4
900 952 998 8609
800 1000 8607
70020
24
16
L
900
500
K
9
5
J
1060
660
H800600
7660798752
Knockout hole ø27(1-3/32) (Remote controller transmission line)
Knockout hole ø27(1-3/32) (Indoor/outdoor connecting line)
G
1200
F
1000
E
11
D
1060
C
1100
B
1152
SEZ-KD09NA4
SEZ-KD12NA4
SEZ-KD18NA4
Model A
1198
Gas pipe Liquid pipe
L-ø2.9(1/8)
2×2-ø2.9(1/8)
2×E-ø2.9(1/8)
Control box
Air filter
Suspension bolt hole4-14×30(9/16×1-3/16) Slot
Refrigerant pipingflare connection (gas)
1
1 2
Drain pipe(O.D.ø32(1-1/4))(Spontaneous draining)
Airinlet
Airoutlet
N
M
175±5(6-29/32±7/32)
Less than 300
Le
ss t
ha
n 5
50
(11-13/16)
(21
-21
/32
)
Mo
re t
ha
n 2
0
Mo
re t
ha
n 1
0
57(2
-1/4
)
57(2
-1/4
)
(1-31/32 ~ 5-29/32)
(30-1
9/32)
(17-23/32)
(11-1
3/16)
(17-2
3/32)
More than 300
(13
/16
)(13
/32
)
(3-9
/16
)
(5-2
9/3
2)
(2-25/32)(4-19/32)
70
10(13/32)
(3-1
5/1
6)
(1-15/16) (24-5/8)
450
37(1-15/32)
20
0(7
-7/8
)
H
157.5(6-7/32)20(13/16)
100(3-15/16)
37(1-15/32)
12(1/2)
12(1
/2)
88(3
-15
/32
)
10
0(3
-15
/16
)XJ=
K
10
0(3
-15
/16
)
88(3
-15
/32
)
777
50(1-31/32)
50 ~ 150
50(1-31/32)G
450
10(13/32)
49
25(1
)
17
0(6
-23
/32
)
10
2(4
-1/3
2)
116
10
02
5(1
)
23(29/32)
C
B (
Su
sp
en
sio
n b
olt p
itch
)2
3(2
9/3
2)
A9
0
D (
Du
ct)
10
0(3
-15
/16
)X(E
-1)=
F
10
0(3
-15
/16
)
15(19/32)
Drain hose (I.D.ø32(1-1/4))<accessory>
(Actual length)
Note2
Access door
Required space for service and maintenance
Access doorCeiling surface
Make the access door at the appointed position properlyfor service maintenance.
Note1. Use M10 screw for the suspension bolt (field supply).
2. Keep the service space for the maintenance at the bottom.
3. This chart indicates for SEZ-KD15NA4 model, which has 3 fans.
SEZ-KD09,12NA4 models have 2 fans.
SEZ-KD18NA4 model has 4 fans.
4. When an inlet duct is used, remove the air filter (supply with the unit), then install the filter (field supply) at suction side.
15
9(6
-9/3
2)
345(13-19/32)
20
(13
/16
)
30
(1-3
/16
)
23
(29
/32
)
270(10-21/32)
20
(13
/16
)
625(Suspension bolt pitch)
700(27-9/16)
677(26-21/32)
15
0(D
uct)
Unit: mm (inch)
(46-7/8)1190
(39)990
(31-1/8)790
N
(48-25/32)1239
(40-29/32)1039
(33-1/16)839
M
Drain pipe(O.D.ø32(1-1/4))
Terminal block (Remote controller transmission line)
Terminal block (Indoor/outdoor connecting line)
2 Refrigerant pipingflare connection (liquid)
ø12.7(1/2)
mm (in.)
(35-7/16)
(27-9/16)
(19-11/16)
(41-3/4)
(33-7/8)
(26)
(47-1/4)
(39-3/8)
(31-1/2)
(39-3/8)
(31-1/2)
(23-5/8)
(41-3/4)
(33-7/8)
(26)
(47-3/16)
(39-5/16)
(31-7/16)
(45-3/8)
(37-1/2)
(29-5/8)
(43-5/16)
(35-7/16)
(27-9/16)700
Drain pipe(O.D.ø32(1-1/4))(Emergency draining)
ø6.35(1/4)
ø9.52(3/8)
15 kBtu/h900 952 998 860
9800 1000 860
7700
20
24
16
L
900
500
K
9
5
J
1060
660
H800600
7660798752
Knockout hole ø27(1-3/32) (Remote controller transmission line)
Knockout hole ø27(1-3/32) (Indoor/outdoor connecting line)
G
1200
F
1000
E
11
D
1060
C
1100
B
1152
09 kBtu/h
12 kBtu/h
18 kBtu/h
Sizes A
1198
Gas pipe Liquid pipe
L-ø2.9(1/8)
2×2-ø2.9(1/8)
2×E-ø2.9(1/8)
Control box
Air filter
Suspension bolt hole4-14×30(9/16×1-3/16) Slot
Refrigerant pipingflare connection (gas)
1
1 2
Drain pipe(O.D.ø32(1-1/4))(Spontaneous draining)
Airinlet
Airoutlet
N
M
175±5(6-29/32±7/32)
Less than 300
Le
ss t
ha
n 5
50
(11-13/16)
(21-2
1/3
2)
Mo
re t
ha
n 2
0
Mo
re t
ha
n 1
0
57(2
-1/4
)
57(2
-1/4
)
(1-31/32 ~ 5-29/32)
(30-1
9/32)
(17-23/32)
(11-1
3/16)
(17-2
3/32)
More than 300
(13/1
6)(1
3/3
2)
(3-9
/16)
(5-2
9/3
2)
(2-25/32)(4-19/32)
70
10(13/32)
(3-1
5/1
6)
(1-15/16) (24-5/8)
450
37(1-15/32)
20
0(7
-7/8
)
H
157.5(6-7/32)20(13/16)
100(3-15/16)
37(1-15/32)
12(1/2)
12(1
/2)
88(3
-15
/32
)
10
0(3
-15
/16
)XJ=
K
10
0(3
-15
/16
)
88(3
-15
/32
)
777
50(1-31/32)
50 ~ 150
50(1-31/32)G
450
10(13/32)
49
25(1
)
17
0(6
-23
/32
)
10
2(4
-1/3
2)
116
10
02
5(1
)
23(29/32)
C
B (
Su
sp
en
sio
n b
olt p
itch
)2
3(2
9/3
2)
A9
0
D (
Du
ct)
10
0(3
-15
/16
)X(E
-1)=
F
10
0(3
-15
/16
)
15(19/32)
Drain hose (I.D.ø32(1-1/4))<accessory>
(Actual length)
Note2
Access door
Required space for service and maintenance
Access doorCeiling surface
Make the access door at the appointed position properlyfor service maintenance.
Note1. Use M10 screw for the suspension bolt (field supply).
2. Keep the service space for the maintenance at the bottom.
3. This chart indicates for size 15 kBtu/h model, which has 3 fans.
Sizes 09,12 kBtu/h models have 2 fans.
Sizes 08 kBtu/h model has 4 fans.
4. When an inlet duct is used, remove the air filter (supply with the unit), then install the filter (field supply) at suction side.
15
9(6
-9/3
2)
345(13-19/32)
20
(13
/16
)
30
(1-3
/16
)
23
(29
/32
)
270(10-21/32)
20
(13
/16
)
625(Suspension bolt pitch)
700(27-9/16)
677(26-21/32)
15
0(D
uct)
Unit: mm (inch)
DIMENSIONS: SEZ-KD09NA4
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
cle
ar
*1
*1 4 in. (100 mm) or more whenfront and sides of the unit are clear
*2 When any 2 sides of left, rightand rear of the unit are clear
holes
(KA09/12/15NA)(KA09/12/15NAH)
REQUIRED SPACE
Liquid refrigerant pipe joint Refrigerant pipe
(flared) Ø 1/4
Gas refrigerant pipe joint
Refrigerant pipe (flared) Ø 3/8 (09/12 kBtu/h)
Ø 1/2 (15 kBtu/h)
4 in. (1
00 mm)
or more
14 in. (350 mm)or more8 in. (2
00 mm)
or more *2
4 in. (100 mm)or more
Unit: inch(mm)
FORM# SEZ-KD09NA4 / SUZ-KA09NA2 - 201903
1340 Satellite Boulevard, Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
DIMENSIONS: SUZ-KA09NA2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.