Submittal ata and Specifications - Plastec Vent Sub Data_Aluminum WH5.pdf · Submittal ata and...
Transcript of Submittal ata and Specifications - Plastec Vent Sub Data_Aluminum WH5.pdf · Submittal ata and...
Submittal Data and Specifications
PLASTEC VENTILATION, INC.www.plastecvent.net Phone: 941-751-7596 Fax: 941-751-7598
Aluminum Weather Hood and Pedestal – Model WH5
Material of Construction and Temperature Limitation: Gray powder coat finish, 0.125" cast aluminum, type 5052 H32 aluminum. All assembly hardware is stainless steel. Temperature limitation is 400º F.
Application: Provides an attractive and user friendly weather hood and fan/motor support pedestal for outside applications.
Manufacturer: Shall be manufactured under the authority of Plastec Ventilation, Inc.
Shall have the following Features and Benefits:• Corrosion resistant gray powder coat finish• Attractive design • Corrosion resistant aluminum construction > 5052 H32 aluminum > Gauge thickness 0.125" > Pedestal weight limitation of 800 lbs static vertical load• Stainless steel assembly hardware• User friendly inspection hood > Reversible front to back and back to front opening > Easy to apply locks, disconnect switch, etc. > Self locking in open position• Height of weather hood can be adjusted (at factory or in the field). Requires a drill.• Utility Blower outlet orientation up to 8 positions in 45º increments
Warranty:This equipment is warranted to be free from defects in material and workmanship for two years from date of original shipment. For the complete warranty agreement, see I, O & M on www.plastecvent.net.
PROJECT ARCHITECT
CONTRACTOR DATE SUBMITTED BY ENGINEER
SPECIFICATION RELATED FAN POSITION MODEL # QTY NOTES
1 of 2
Shown withPlastec 25 Utility Blower
Submittal Data and Specifications
PLASTEC VENTILATION, INC.www.plastecvent.net Phone: 941-751-7596 Fax: 941-751-7598
Aluminum Weather Hood and Pedestal – Model WH5
DIMENSIONAL DATA (inches)
18.00
15.00
17.63
31.75
20.88
14.00
19.25
11.00
5.00
5.00
17.63
3.51
1.5 1.5
52.0"
Reversible Inspection Hood
Self Locking Flange on each end
Flanges (2) with pre-drilled holes (4) for Motor Support Stand
Weather Hood
Support Brackets (2)
ClearanceOpening / Closing
2 of 2