SUBJECT: Registration ’ Configuring the Dialler PLATFORM

TelstraClear Technical Document

(C) Copyright TelstraClear Limited of 8

paradise.net Technical Assistance Customers phone toll free: Fax toll free: E-mail: Internet:

0800 46 72 72 0800 36 72 00 [email protected] www.paradise.net.nz

Freepost: TelstraClear Limited Freepost 4768 Private Bag 92143 Auckland

Disclaimer: This information is provided on an �as-is� basis. This is all the information on this product that paradise.net Technical Assistance can provide. We take no responsibility for any difficulties or problems that may arise from the installation and/or use of this product.

SUBJECT: Registration � Configuring the Dialler PLATFORM: Macintosh OS 9.x

What you need to get started ! An account with paradise.net ! Your username ! Your password

Internet Setup Assistant Start the Internet Setup Assistant by running it from your Macintosh HD. The Internet Setup Assistant can usually be found at the following Hard Drive location: ! Macintosh HD/Applications/Utilities/Assistants/Internet Setup Assistant

If you are having trouble finding it manually, you can use Sherlock: ! On the Apple menu, click Sherlock 2 ! Ensure the Macintosh HD is the highlighted option (top left) ! Type internet setup assistant into the search field ! Click the Magnifying glass (at right) to start the search ! You are likely to get two or three (or more) results. To start the assistant,

double-click on any one of them







A. Internet Access Click Yes

B. Internet Access Click Yes







1. Introduction Just click the right arrow to continue

2. Configuration Name In the first field, type paradise Put the dot next to Modem Click the right arrow to continue







3. Modem Settings Modem: Select your modem (usually Apple or iMac Internal 56k� but this is probably already selected for you). Port: Is likely to be Internal Modem, unless you have an external modem. In this case, select the port your modem is connected to. Ensure there is a dot in Tone Ignore dial tone? Leave it blank Click the right arrow to continue

4. Configuration Information In the first field, type the dial-up number: 086 727 235 - Wellington local calling zone 086 727 234 - Rest of New Zealand Kapiti Coast Customers who have Saturn lines must use the Wellington number 086 727 235. Kapiti Coast customers who have Telecom lines must use the Rest of NZ number 086 727 234. This includes Telecom customers who have the upgrade allowing zero charges for Wellington calls. Hot Tip! If you have Call Waiting and would like to disable it temporarily, then just prefix the number with either #29 (for Saturn) or *52 (for Telecom). Click the right arrow to continue.







5. PPP Connect Scripts Ensure the dot is in No Click the right arrow to continue.

6. IP Address Ensure the dot is in No Click the right arrow to continue.







7. Domain Name Servers In the first (large) field, type the following two numbers carefully (use the Return key to drop to the next line): ! 203.96.152.4 ! 203.96.152.12

In the second field, type: ! paradise.net.nz

Click the right arrow to continue.

8. E-mail Address and Password In the first field, type your own paradise e-mail address. Make sure to type it all in lower-case letters and it must use the correct form. Eg: [email protected] Type your paradise password into the second field (all in lower-case). Click the right arrow to continue.







9. E-mail Account and Host Computer In the first field, type: ! [email protected] (Substituting your own username)

In the second field, type: ! smtp.paradise.net.nz

Be absolutely sure to use lower-case letters and take extra special care with smtp � it�s a surprisingly dyslexic combination. Click the right arrow to continue.

10. Newsgroup Host Computer Type: news.paradise.net.nz Click the right arrow to continue.







11. Proxies Ensure the dot is in No Click the right arrow to continue.

12. Conclusion You can click on the Show Detail button to get a summarized read-out of the information we just worked through. Have a look through that information to double-check. Once you have confirmed your settings on the details screen, remove the tick from Connect when finished and click on Go Ahead to save your settings and complete the wizard. Congratulations! That�s it. If you haven�t already done so, you should continue with the set-up documents for Internet Explorer and Outlook Express.

SUBJECT: Registration ’ Configuring the Dialler PLATFORM

Documents

Transcript of SUBJECT: Registration ’ Configuring the Dialler PLATFORM