SUBJECT INDEXNOTE: LINKS NOT ACTIVE IN THIS VERSION

Papers are listed by both Primary and Secondary INCE Subject Classification

Each paper is listed twice – once under primary and once under secondary classification

Select the paper number (nc13_xxx) to link to paper

00 GENERAL

01 International INCE nc13_186 INCE/USA student awards and activities - Past, present and future Steve Sorenson

05 Publications

nc13_195 Presenting a paper at an INCE conference J. Stuart Bolton, Courtney B. Burroughs, Paul R. Donavan and Christopher W.

Menge

06 History and Philosophy

nc13_186 INCE/USA student awards and activities - Past, present and future Steve Sorenson

07 Education

nc13_180 A dual-level integrated course in vibration and acoustics for noise control education M.G. Prasad nc13_195 Presenting a paper at an INCE conference J. Stuart Bolton, Courtney B. Burroughs, Paul R. Donavan and Christopher W.

Menge 08 Noise Programs

nc13_194 Noise control strategies: Lessons from Safe-in-Sound Excellence in Hearing Loss

Prevention AwardsTM

Deanna K. Meinke, Thais C. Morata and Charles Hayden nc13_113 Buy-Quiet Roadmap: A web-based application supporting procurement of low-noise

equipment in the context of a hearing conservation program Beth Cooper, David A. Nelson and Amy Gelfand nc13_180 A dual-level integrated course in vibration and acoustics for noise control education M.G. Prasad nc13_166 Using public input to develop scientifically sound noise pollution policy for Vermont's

rural land uses and communities: Methodology and initial results Eddie Duncan

10 EMISSION: NOISE SOURCES

nc13_113 Buy-Quiet Roadmap: A web-based application supporting procurement of low-noise equipment in the context of a hearing conservation program

Beth Cooper, David A. Nelson and Amy Gelfand

11 Noise-Generating Devices

11.4 Air-moving and distribution devices

nc13_48 Development of a test appartus to determine optimal fan configurations for haul trucks and LHDs

J. Shawn Peterson, M. Jenae Lowe, David Yantek and Lynn Alcorn nc13_128 Extending noise- and power-optimized fan selection into the sound quality domain

using iso-acoustic and iso-power methods David Nelson nc13_173 Computational aeroacoustic modeling of open fan and comparison of predicted and

experimental noise fields Sitae Kim, Yaying Niu and Yong-Joe Kim nc13_121 Notebook fan noise user study Eric Baugh, Marco Beltman and Rina Doherty nc13_55 Laboratory evaluation of noise and airflow for haul truck fans David S. Yantek and J. Shawn Peterson nc13_204 Testing of fans with microperforated housings Seungkyu Lee and J. Stuart Bolton nc13_97 Effect of inlet guide vanes on centrifugal compressor acoustics Neil Figurella, Rick Dehner, Ahmet Selamet, Kevin Tallio, Keith Miazgowicz,

Robert Wade, Ahsanul Karim, Philip Keller and Michael Becker

11.5 Electric power devices

nc13_12 Acoustic comparison of a hybrid-electric and an internal combustion Snowmobile Jared Giesbrecht, David Kuyek and Simon Ouellette

11.6 Other power devices

nc13_97 Effect of inlet guide vanes on centrifugal compressor acoustics Neil Figurella, Rick Dehner, Ahmet Selamet, Kevin Tallio, Keith Miazgowicz,

Robert Wade, Ahsanul Karim, Philip Keller and Michael Becker nc13_129 Noise control for a natural gas compressor station with reciprocating and centrifugal

compressors Timothy G. Simmons

nc13_114 Modification of simulated far-field engine noise by changing near field measurement singular values

Michael D. Hayward, Brandon M. Sobecki, J. Stuart Bolton and Patricia Davies nc13_8 Improving predictions of gas turbine exhaust silencer performance James Hill, Colin Malecki, Paul Williams and Ray Kirby

11.7 Rolling contact noise sources

nc13_107 Generation mechanisms of tire-pavement noise Tyler P. Dare and Robert J. Bernhard nc13_159 System-wide OBSI study to evaluate success of diamond grinding to attain project

noise reduction goal J. Eric Cox and Christopher W. Menge nc13_200 Effect of rotation on the natural frequencies of coupled tire structural-acoustic modes Rui Cao and J. Stuart Bolton nc13_196 An update on the Arizona Quiet Pavement Pilot Program through year eight Paul R. Donavan and Carrie Janello

12 Stationary Noise Sources

nc13_46 Community based social marketing process to define measures for low noise behavior with outdoor machinery

Sebastian Wschiansky, Maja Fischer and Stephanie Moser

12.1 Large equipment

nc13_62 Design of a noise abatement system for optimized performance of an industrial condensing cooling tower

Mervyn Choy, Amir Golpaygan, Chris Hugh and Joseph Lasowski

12.2 Construction and demolition equipment

nc13_103 Rugged coulomb friction jackhammer moil point chisel noise damper Henry A. Scarton, Kyle R. Wilt and Christopher T. Wall

12.3 Computers and business equipment

nc13_9 Revision of ISO 9296 - International rules for declaration of IT equipment noise emissions embark upon new era

Ikuo Kimizuka nc13_23 Technical issues of the qualification method of the inverse square law characteristics

for sound power determination of IT equipment Ikuo Kimzuka, Masaki Suzuki, Akio Takanashi, Kouji Tanaka and Kohei Shimoda nc13_44 Considerations for improving the efficiency of daily calibration work of multi-channel

simultaneous measurement system for sound power level determination Kohei Shimoda, Ikuo Kimizuka, Shigeru Tashiro and Kouji Tanaka

nc13_121 Notebook fan noise user study Eric Baugh, Marco Beltman and Rina Doherty nc13_60 Holographic visualization of sound radiation from computer hard drives Yong Thung Cho and J. Stuart Bolton

12.4 Home appliances and small equipment

nc13_155 Development of a tuned vibro-acoustic absorber for a clothes washer application Kevin Herreman and Crystal Young nc13_157 Statistical energy analysis model of a dishwasher Kevin Herreman nc13_158 Value of a sound rating for dishwashers Kevin Herreman and Crystal Young nc13_161 Product Noise Rating (PNR) as applied to dishwashers: A test case Crystal Young and Kevin Herreman nc13_208 Vibro-acoustic source characterization of the tub in a washing machine Jeong-Guon Ih, Agustinus Oey, Yong-Ho Heo and Kyung-Seop Hong

12.5 Power tools

nc13_47 Design and evaluation of noise control measures for a pneumatic nail gun Vignesh Jayakumar, Andrew Hubbard, George Schneider, Stephen Louie and Edward

Zechmann nc13_117 The air-arc interaction in air carbon arc gouging M. Jenae Lowe and Jessie J. Mechling nc13_120 Comparison of laboratory measurements of noise from constant voltage and constant

current air carbon arcing M. Jenae Lowe and Kevin C. Schuster

13 Moving Noise Sources

13.1 Aircraft

nc13_25 Incorporating real atmospheres into aviation noise models using meteorological data from the AERMOD atmospheric dispersion model

Rachel Romond and Victor W. Sparrow nc13_30 Modeling of ground reflection effects in aircraft flyover noise synthesis Michael Arntzen, Jeroen Sijl and Dick G. Simons nc13_31 Acoustic ray tracing parallelization Michael Arntzen, Jie Shen, Ana Lucia Varbanescu, Henk Sips and Dick G. Simons nc13_43 Auralization architectures for NASA's next generation aircraft noise prediction

program Stephen A. Rizzi, Leonard V. Lopes, Casey L. Burley and Aric R. Aumann nc13_45 A comparative analysis of the subjective assessment of standard and noise abatement

aircraft procedures Abhishek Sahai and Eike Stumpf

nc13_53 Verification of aircraft acoustic source data for the Aviation Environmental Design Tool

Eric Boeker and Amanda Rapoza nc13_74 Practical aircraft simulation noise modeling Troy D. Schultz, Joseph J. Czech and Kenneth J. Plotkin nc13_187 Refinement of an ECG-based approach for detecting awakenings in a study on

aircraft noise-induced sleep disturbance Sarah McGuire and Mathias Basner nc13_11 A simplified approach to simulating sonic booms indoors Clothilde Giacomoni and Patricia Davies nc13_50 Simulator study of indoor annoyance caused by shaped sonic boom stimuli with and

without rattle augmentation Jonathan Rathsam, Alexandra Loubeau and Jacob Klos nc13_3 A preliminary test conducted to understand perceptual characteristics of rotorcraft

noise Andrew McMullen, Patricia Davies and Selen Okcu nc13_141 Application of a broadband active vibration control system to a helicopter trim panel Randolph H. Cabell, Noah H. Schiller and Frank Simon nc13_147 Sound synthesis approach for noise annoyance assessment of rotorcraft operations D. Sabbatini, S. Hartjes, H.G. Visser, M. Gennaretti, G. Bernardini and K. Janssens nc13_148 Acoustical holography imaging of full-scale jet noise fields Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James nc13_149 Acoustical holography and proper orthogonal decomposition methods for the

analysis of military jet noise Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James nc13_198 Psychoacoustic analysis of synthesized jet noise Selen Okcu, Jonathan Rathsam and Stephen A. Rizzi nc13_167 Vibroacoustic tailoring of a fuselage panel with multidisciplinary considerations Albert Allen and Adam Przekop

13.2 Highway vehicles

nc13_10 Evaluation of a heavy equipment cab interior sound field and implications on modeling

David C. Copley nc13_64 Influence of car body noise attenuation ability on traffic sound perception and driving

safety Ranran Ding and Yu Du nc13_81 A case study on development of a porous ducted air induction system solution for a

new Chrysler vehicle Rakesh Khurana and Weiguo Zhang nc13_83 Using sound enhancement techniques to define and refine vehicle interior sound

image/quality Rakesh Khurana, Jeffrey Orzechowski, Francois Orange, Patrick Boussard and

Dennis Sulisz

nc13_139 Vehicle design for robust driveline NVH due to imbalance and runout: A Case study Omar Shubailat, Roger King, Mohamad Qatu and Youssef Hammi nc13_145 Time-domain ASQ method for pass-by noise engineering K. Janssens and F. Bianciardi nc13_191 An evaluation of aerodynamic noise produced by car side mirrors Wagner Duarte Machado and Eduardo Bauzer Medeiros

13.3 Off-road vehicles

nc13_12 Acoustic comparison of a hybrid-electric and an internal combustion Snowmobile Jared Giesbrecht, David Kuyek and Simon Ouellette

13.4 Railbound vehicles

nc13_56 Noise and vibration measurements for the DCTA Stadler DMU David A. Towers, Timothy M. Johnson and Scott S. Edwards

13.7 Large engine-powered mobile equipment

nc13_110 Noise source identification on a stageloader system Hugo E. Camargo, David S. Yantek, Robert Randolph, Kyle Schwartz, Patricio

Ravetta and Ricardo Burdisso nc13_137 Experimental vibro-acoustic analysis for troubleshooting compactor cab booming

noise Hongan Xu, John Wang, Owen Dickinson and Hyunseok Kang nc13_42 Vibration and noise monitoring activities in the construction industry: How

communication technologies help offering efficient services Daniel Vaucher De La Croix, Erik Aflalo and Christian Frénéat

13.9 Spacecraft

nc13_111 Analysis of launch abort system vent noise in Orion spacecraft Indranil Dandaroy

14 Specialized Industrial Machinery and Equipment

14.1 Machinery used in manufacturing industries

nc13_129 Noise control for a natural gas compressor station with reciprocating and centrifugal compressors

Timothy G. Simmons

14.3 Mining and quarrying equipment

nc13_132 Some practical aspects of noise control at a coal handling plant Marek L. Szary, Manoj K. Mohanty, Joseph C. Hirschi and Peter L. Weber

nc13_117 The air-arc interaction in air carbon arc gouging M. Jenae Lowe and Jessie J. Mechling nc13_120 Comparison of laboratory measurements of noise from constant voltage and constant

current air carbon arcing M. Jenae Lowe and Kevin C. Schuster nc13_48 Development of a test appartus to determine optimal fan configurations for haul

trucks and LHDs J. Shawn Peterson, M. Jenae Lowe, David Yantek and Lynn Alcorn nc13_37 Development of elastomeric drill chuck isolators to reduce roof bolting machine

drilling noise David H. Johnson, Robert J. Michael, Shane J. Callaghan and Joshua J. Fontana nc13_54 Sound radiation modeling and correlation of a longwall cutting drum Junyi Yang, Hugo Camargo, David S. Yantek and Bryce Gardner nc13_55 Laboratory evaluation of noise and airflow for haul truck fans David S. Yantek and J. Shawn Peterson nc13_110 Noise source identification on a stageloader system Hugo E. Camargo, David S. Yantek, Robert Randolph, Kyle Schwartz, Patricio

Ravetta and Ricardo Burdisso

14.5 Power generation and transmission

nc13_40 Large-scale calculation of possible locations for specific wind turbines under consideration of noise limits

Fabian Probst, Wolfgang Probst and Bernd Huber nc13_41 Efficient evaluation of wind turbine noise Dejan Arsić, John Huff Jr. and Jakob Putner

20 PHYSICAL PHENOMENA

21 Physical Mechanisms of Noise Generation

nc13_15 Transient, planar, nonlinear acoustical holography for reconstructing acoustic pressure and particle velocity fields

Yaying Niu and Yong-Joe Kim

21.6 Flow noise, aerodynamic sound

nc13_21 Acoustical performance of two commercial windscreens Jerry G. Lilly nc13_111 Analysis of launch abort system vent noise in Orion spacecraft Indranil Dandaroy nc13_202 Study of the effect of grazing flow on the performance of microperforated and

perforated panels Arun Viswanathan and J. Stuart Bolton nc13_174 Acoustical studies on corrugated tubes B. Rajavel and M.G. Prasad

nc13_191 An evaluation of aerodynamic noise produced by car side mirrors Wagner Duarte Machado and Eduardo Bauzer Medeiros nc13_167 Vibroacoustic tailoring of a fuselage panel with multidisciplinary considerations Albert Allen and Adam Przekop nc13_49 Multi-source aeroacoustic noise prediction method Jonathan Christian and Jonathan Scott nc13_28 An improved screening method for addressing flow excited branch resonance in

process piping systems Farhana Lamis, Raj Arjunan and Arindam Ghosh

23 Propagation, Transmission & Scattering of Sound

23.1 Radiating surfaces

nc13_2 Sound radiation properties of complex modes of vibration Oliver Unruh and Michael Sinapius nc13_58 Sound radiation of circularly oscillating spherical and cylindrical shells John Wang and Hongan Xu nc13_54 Sound radiation modeling and correlation of a longwall cutting drum Junyi Yang, Hugo Camargo, David S. Yantek and Bryce Gardner nc13_63 The procedures of mapped radiation mode analysis based near-field acoustic

holography Haijun Wu, Weikang Jiang and Haibin Zhang nc13_114 Modification of simulated far-field engine noise by changing near field measurement

singular values Michael D. Hayward, Brandon M. Sobecki, J. Stuart Bolton and Patricia Davies nc13_116 Sound field reconstruction at high frequencies by using a piece-wise interpolation

method Yangfan Liu and J. Stuart Bolton nc13_122 Advancements toward a high-powered carbon nanotube thin-film loudspeaker Andrew R. Barnard, Timothy A. Brungart, Timothy E. McDevitt, David M. Jenkins

and Brian L. Kline

23.9 Transmission

nc13_123 Numerical study of transmission loss through a slow gas layer adjacent to a plate Noah H. Schiller, Benjamin S. Beck and Adam C. Slagle

24 Sound Propagation in the Atmosphere

nc13_25 Incorporating real atmospheres into aviation noise models using meteorological data

from the AERMOD atmospheric dispersion model Rachel Romond and Victor W. Sparrow nc13_31 Acoustic ray tracing parallelization Michael Arntzen, Jie Shen, Ana Lucia Varbanescu, Henk Sips and Dick G. Simons

24.2 Absorption of sound in air

nc13_57 Effects of relative humidity on environmental noise propagation Gillian Redman

24.3 Effects of fog and precipitation

nc13_14 Experimental study on the convergence behavior of modified FXLMS algorithm for active impact noise control

Guohua Sun, Mingfeng Li and Teik C. Lim

24.6 Meteorological factors; Effects of wind, temperature and humidity

nc13_57 Effects of relative humidity on environmental noise propagation Gillian Redman

24.8 Reflection and absorption at small angles over a ground surface

nc13_30 Modeling of ground reflection effects in aircraft flyover noise synthesis Michael Arntzen, Jeroen Sijl and Dick G. Simons

26 Sound Propagation in Ducts

26.1 General theory of propagation in ducts

nc13_92 Effect of flow on the noise attenuation of a muffler system Tongan Wang, Kristopher Lynch, Tyler Relf and John Maxon nc13_170 The effect of indoor air quality requirements on down-duct noise: HVAC noise

control in a post-fibrous duct liner world David Manley

30 NOISE CONTROL ELEMENTS

nc13_132 Some practical aspects of noise control at a coal handling plant Marek L. Szary, Manoj K. Mohanty, Joseph C. Hirschi and Peter L. Weber

31.1 Barriers and screens, shielding

nc13_185 Use of advanced tools and techniques to resolve an atypical parallel noise barrier

case Paul Burge, John Crawford and Peter Wasko

32 Enclosures for Noise Sources

nc13_151 Enhancing muffler or silencer performance by adding bypass ducts Y. Zhang, D. W. Herrin and T. W. Wu

34 Filters, Mufflers, Silencers and Resonators

nc13_151 Enhancing muffler or silencer performance by adding bypass ducts Y. Zhang, D. W. Herrin and T. W. Wu

34.1 Dissipative type

nc13_8 Improving predictions of gas turbine exhaust silencer performance James Hill, Colin Malecki, Paul Williams and Ray Kirby

34.2 Reactive type

nc13_92 Effect of flow on the noise attenuation of a muffler system Tongan Wang, Kristopher Lynch, Tyler Relf and John Maxon

34.3 Helmholtz resonators

nc13_94 Modified Herschel-Quincke tube for passive duct-borne HVAC noise control Seth M. Harrison

35 Absorptive Materials

nc13_204 Testing of fans with microperforated housings Seungkyu Lee and J. Stuart Bolton

35.1 Mechanisms of absorption – Theory

nc13_65 Selection of appropriate models and implementation of efficient computational strategies for modeling porous materials in a vibro-acoustic context

Jean-Pierre Coyette, David Burd, Erwan Jacq, Gregory Lielens, Benoît Van den Nieuwenhof and Bernard Van Antwerpen

nc13_150 Varying backing cavity depths to achieve broadband absorption using micro-perforated panels

X. Hua, D. W. Herrin and P. Jackson nc13_202 Study of the effect of grazing flow on the performance of microperforated and

perforated panels Arun Viswanathan and J. Stuart Bolton

35.5 Materials for special applications

nc13_196 An update on the Arizona Quiet Pavement Pilot Program through year eight Paul R. Donavan and Carrie Janello nc13_107 Generation mechanisms of tire-pavement noise Tyler P. Dare and Robert J. Bernhard

nc13_159 System-wide OBSI study to evaluate success of diamond grinding to attain project noise reduction goal

J. Eric Cox and Christopher W. Menge

35.6 Perforated facings for absorptive materials

nc13_150 Varying backing cavity depths to achieve broadband absorption using micro-perforated panels

X. Hua, D. W. Herrin and P. Jackson

38.3 Active vibration control for noise reduction

nc13_14 Experimental study on the convergence behavior of modified FXLMS algorithm for active impact noise control

Guohua Sun, Mingfeng Li and Teik C. Lim

38.5 Change of configuration or design for noise control purposes

nc13_79 Efficient analysis of modifications to complex structures for vibration reduction Andrew S. Wixom and J. Gregory McDaniel nc13_169 Acoustic emission monitoring of changes in shape memory polymer under structural

test Emmanuel Ayorinde, Mohammad Al-Zubi, Xin Wu and Feizhong Deng

40 VIBRATION AND SHOCK

41 Characteristics of Sources of Vibration and Shock

nc13_168 A spectro-geometric method for the vibration analysis of built-up structures Shiliang Jiang, Wen L. Li and Tiejun Yang nc13_2 Sound radiation properties of complex modes of vibration Oliver Unruh and Michael Sinapius nc13_139 Vehicle design for robust driveline NVH due to imbalance and runout: A Case study Omar Shubailat, Roger King, Mohamad Qatu and Youssef Hammi nc13_169 Acoustic emission monitoring of changes in shape memory polymer under structural

test Emmanuel Ayorinde, Mohammad Al-Zubi, Xin Wu and Feizhong Deng nc13_193 Protecting historic structures from construction vibration Rob Greene nc13_208 Vibro-acoustic source characterization of the tub in a washing machine Jeong-Guon Ih, Agustinus Oey, Yong-Ho Heo and Kyung-Seop Hong

41.3 Transients and shocks, impacts

nc13_47 Design and evaluation of noise control measures for a pneumatic nail gun Vignesh Jayakumar, Andrew Hubbard, George Schneider, Stephen Louie and Edward

Zechmann

42 Vibrating Surfaces and Structures

nc13_203 Simulation of random response of typical honeycomb panels subjected to a diffuse sound field

Bryce Gardner, Ignatius Vaz and Mohamed Ali Hamdi nc13_26 Measurement and modeling of damping for time-domain structural acoustics

simulations Benjamin Cotté, Augustin Parret-Fréaud and Antoine Chaigne nc13_58 Sound radiation of circularly oscillating spherical and cylindrical shells John Wang and Hongan Xu nc13_125 Near-field structure-borne sound holography: Theory vs. practice Dietmar Greussing

43 Propagation in Structures

nc13_32 Passive control of vibration and sound transmission for vehicle structures via embedded Acoustic Black Holes

S.C. Conlon, F. Semperlotti and J.B. Fahnline nc13_79 Efficient analysis of modifications to complex structures for vibration reduction Andrew S. Wixom and J. Gregory McDaniel

43.2 Transmission and attenuation in solid structures

nc13_112 Ground-borne vibration control in a building-like structure using multi-positive position feedback

Josué Enríquez-Zárate and Gerardo Silva-Navarro

46 Vibration Isolators and Attenuators

46.2 Vibration isolators

nc13_37 Development of elastomeric drill chuck isolators to reduce roof bolting machine drilling noise

David H. Johnson, Robert J. Michael, Shane J. Callaghan and Joshua J. Fontana

46.4 Active vibration control

nc13_82 Experimental comparison of two active vibration control approaches: Velocity feedback and negative capacitance shunt damping

Benjamin Beck and Noah Schiller

nc13_156 Active control of sinusoidal disturbances using inverse model LMS algorithm Mingfeng Li, Teik C. Lim and Jie Duan nc13_141 Application of a broadband active vibration control system to a helicopter trim panel Randolph H. Cabell, Noah H. Schiller and Frank Simon

47 Vibration-Damping Materials and Structures

nc13_26 Measurement and modeling of damping for time-domain structural acoustics simulations

Benjamin Cotté, Augustin Parret-Fréaud and Antoine Chaigne nc13_32 Passive control of vibration and sound transmission for vehicle structures via

embedded Acoustic Black Holes S.C. Conlon, F. Semperlotti and J.B. Fahnline nc13_103 Rugged coulomb friction jackhammer moil point chisel noise damper Henry A. Scarton, Kyle R. Wilt and Christopher T. Wall

47.4 Dynamic absorbers

nc13_59 Embedded mechanical bandpass filters using acoustic metamaterial waveguides coupled by cavity modes

Hongfei Zhu and Fabio Semperlotti nc13_155 Development of a tuned vibro-acoustic absorber for a clothes washer application Kevin Herreman and Crystal Young

49 Effects of Vibration and Mechanical Shock

49.2 On structures and machines

nc13_35 Finite element analysis of vibro-acoustic response of sandwich plates with corrugated cores subject to airborne excitation

Yibo Wang, Hui Zheng and Zhiping Wei

49.4 In buildings

nc13_4 A simpler and effective method to perform building vibration analyses consistent with FTA's "detailed" method

Erich Thalheimer, Tom Herzog and Jacob Poling nc13_112 Ground-borne vibration control in a building-like structure using multi-positive

position feedback Josué Enríquez-Zárate and Gerardo Silva-Navarro

50 IMMISSION: PHYSICAL ASPECTS OF ENVIRONMENTAL NOISE

51 Building Noise Control

nc13_73 Proceedings in regulating private noise sources in sensitive areas in Germany Christian Fabris nc13_105 Acoustical design of the perception based engineering laboratory at Ray W. Herrick

Laboratories Center for High Performance Buildings Nathan Bryce Sevener nc13_136 Degradation in airborne sound isolation due to structural loading in wood frame

buildings and meeting building code requirements Alicia J. Wagner Larsen

51.1 Sound fields in rooms and enclosed spaces

nc13_29 Acoustics of modern and old museums António P.O. Carvalho, Hélder J.S. Gonçalves and Luísa M.M. Garcia nc13_85 Physics based spatial acoustics in virtual scenes Steven G. Mattson, Michael Williams, Ryan Schneider and Darrel Younk nc13_86 Playback of physics based spatial acoustics to create an immersive environment Steven G. Mattson, Kevin Nelson, Michael Williams and Ryan Helminen nc13_162 Update to Beranek's room volume to room constant figure Jeffrey L. Fullerton nc13_10 Evaluation of a heavy equipment cab interior sound field and implications on

modeling David C. Copley nc13_178 Compatibility of outdoor concerts in urban areas: Planning case study Mark Bliss nc13_72 Acoustical challenges in long term care facilities Zohreh Razavi nc13_127 Consultant and student collaboration on sound level measurements in a hospital Benjamin Davenny, Robert Celmer, Rachel Parlock, Tiffany Stahura, Thomas Kaytt,

Stephen Lindsey nc13_211 A comparison of hospital noise survey results with patient satisfaction scores Kenric Van Wyk, Melinda Miller and Kristen Murphy

51.2 Reduction of noise levels by increased absorption

nc13_162 Update to Beranek's room volume to room constant figure Jeffrey L. Fullerton

51.3 Sound transmission thru windows, doors, walls, ceilings, floors

nc13_6 Noise transmission loss of sandwich composite panels with passive layered control treatments

Sebastian Ghinet, Haisam Osman and Anant Grewal

nc13_33 Comparison of finite element models for residential building walls and low frequency sound transmission

Beom Soo Kim and Victor W. Sparrow nc13_152 High transmission loss glass wall design Isaac Old and Eddie Duncan nc13_104 Speech privacy and single steel stud wall construction John LoVerde and Wayland Dong

51.4 Sound-insulating structures, transmission coefficients and transmission loss

nc13_90 Simulating the variance of Sound Transmission Class ratings from real measurement parameters

Elliot Dick and David Berg nc13_123 Numerical study of transmission loss through a slow gas layer adjacent to a plate Noah H. Schiller, Benjamin S. Beck and Adam C. Slagle

51.5 Flanking and impact transmission

nc13_133 Laboratory measurements of the reduction of various impact noise sources by floor coverings

Jinyun Chung and Bonggyu Cho

51.6 Heating, ventilating and air conditioning

nc13_94 Modified Herschel-Quincke tube for passive duct-borne HVAC noise control Seth M. Harrison nc13_96 Qualification of air-conditioning unit base pan using Weibull analysis Parag H. Mathuria and Richard J. Wood nc13_170 The effect of indoor air quality requirements on down-duct noise: HVAC noise

control in a post-fibrous duct liner world David Manley nc13_62 Design of a noise abatement system for optimized performance of an industrial

condensing cooling tower Mervyn Choy, Amir Golpaygan, Chris Hugh and Joseph Lasowski nc13_81 A case study on development of a porous ducted air induction system solution for a

new Chrysler vehicle Rakesh Khurana and Weiguo Zhang nc13_174 Acoustical studies on corrugated tubes B. Rajavel and M.G. Prasad

51.9 Plumbing and piping noise

nc13_28 An improved screening method for addressing flow excited branch resonance in process piping systems

Farhana Lamis, Raj Arjunan and Arindam Ghosh

nc13_49 Multi-source aeroacoustic noise prediction method Jonathan Christian and Jonathan Scott

52 Community Noise Control

52.1 Community noise levels

nc13_20 Characterization of the "Ranchlands' Hum"'; A Calgary community noise nuisance Michael Smith, Grimika Gupta, Emily Marasco, Marcia Epstein, Richard Patching,

Ken Scott and Spoorthi Nayak, nc13_76 The technical challenges of permitting power distribution and transmission systems

subject to ambient noise degradation standards Patricia Pellerin, Erik Kalapinski, Scott Noel and Tanya Ambrose nc13_118 An ambient noise model for background noise corrections Charles Oppenheimer and Seth Bard nc13_41 Efficient evaluation of wind turbine noise Dejan Arsić, John Huff Jr. and Jakob Putner nc13_53 Verification of aircraft acoustic source data for the Aviation Environmental Design

Tool Eric Boeker and Amanda Rapoza nc13_88 Construction noise control program for the Clinton Combined Sewer Overflow

Tunnel Project Erich Thalheimer, Scott Manchester and Jacob Poling

52.2 Airport noise

nc13_142 Noise-induced sleep disruption among hospitalized patients: Brain-based approaches toward sleeping soundly on noisy nights

Jeffrey M. Ellenbogen

52.3 Road traffic noise

nc13_70 Guideline for monitoring noise from road infrastructures Salvatore Curcuruto, Francesca Sacchetti, Delio Atzori, Rinaldo Betti, Enrico

Lanciotti, Giuseppe Marsico, Enrico Mazzocchi, Stefano Curcio, Maurizio Bassanino, Paola Maggi, Mauro Mussin and Jacopo Fogola

52.4 Rail vehicle noise

nc13_56 Noise and vibration measurements for the DCTA Stadler DMU David A. Towers, Timothy M. Johnson and Scott S. Edwards

52.5 Industrial noise

nc13_153 Noise measurements and regulatory evaluations for three wastewater treatment plants

Jeff D. Szymanski

nc13_144 Limitations of noise ordinances for addressing substation noise Damien Bell nc13_177 Potential effects on soundscape from hydroelectric power Mark Storm

52.6 Construction noise

nc13_88 Construction noise control program for the Clinton Combined Sewer Overflow Tunnel Project

Erich Thalheimer, Scott Manchester and Jacob Poling nc13_134 Assessment of construction noise annoyance by construction machinery Sungchan Lee and Hyemi Lee nc13_68 Identifying noise monitoring locations for efficient compliance monitoring of

construction sites and mines Douglas Manvell

52.7 Sport and recreation areas and events

nc13_38 An indicator for rating environmental quality of urban parks Jan Jabben, Edwin Verheijen and Miriam Weber nc13_178 Compatibility of outdoor concerts in urban areas: Planning case study Mark Bliss nc13_176 Preserving and restoring authentic acoustic environments that will inspire the

American public Kurt Fristrup

53 In-Plant Noise Control

53.1 In-plant noise levels

nc13_84 An empirical method to improve accuracy of in-situ sound power measurements of industrial equipment

Robert S. Johnson, Sr. and Frank H. Brittain

53.2 Exposures of workers

nc13_137 Experimental vibro-acoustic analysis for troubleshooting compactor cab booming noise

Hongan Xu, John Wang, Owen Dickinson and Hyunseok Kang

54 Shipboard and Offshore Platform Noise Control

54.3 Underwater noise

nc13_52 Underwater noise monitoring to predict marine life impacts during ocean floor rock blasting

Peter Guldberg and Ryan Callahan

56 Noise Surveys

56.1 Outdoors

nc13_42 Vibration and noise monitoring activities in the construction industry: How communication technologies help offering efficient services

Daniel Vaucher De La Croix, Erik Aflalo and Christian Frénéat nc13_70 Guideline for monitoring noise from road infrastructures Salvatore Curcuruto, Francesca Sacchetti, Delio Atzori, Rinaldo Betti, Enrico

Lanciotti, Giuseppe Marsico, Enrico Mazzocchi, Stefano Curcio, Maurizio Bassanino, Paola Maggi, Mauro Mussin and Jacopo Fogola

56.2 Indoors

nc13_68 Identifying noise monitoring locations for efficient compliance monitoring of

construction sites and mines Douglas Manvell nc13_127 Consultant and student collaboration on sound level measurements in a hospital Benjamin Davenny, Robert Celmer, Rachel Parlock, Tiffany Stahura, Thomas Kaytt

and Stephen Lindsey nc13_211 A comparison of hospital noise survey results with patient satisfaction scores Kenric Van Wyk, Melinda Miller and Kristen Murphy

56.3 Soundscapes

nc13_177 Potential effects on soundscape from hydroelectric power Mark Storm

60 IMMISION: EFFECTS OF NOISE

61 Perception of Sound

nc13_29 Acoustics of modern and old museums António P.O. Carvalho, Hélder J.S. Gonçalves and Luísa M.M. Garcia nc13_64 Influence of car body noise attenuation ability on traffic sound perception and driving

safety Ranran Ding and Yu Du

nc13_86 Playback of physics based spatial acoustics to create an immersive environment Steven G. Mattson, Kevin Nelson, Michael Williams and Ryan Helminen nc13_164 Understanding and preserving quiet areas Nicholas P. Miller nc13_175 Identifying varying preferences in a paired comparison jury study using unsupervised

clustering techniques Glenn Pietila and Teik C. Lim

61.2 Theories of hearing

nc13_71 Accounting for the absolute threshold of hearing when analyzing low level sound Menachem Rafaelof

61.3 Hearing levels and hearing thresholds of populations

nc13_71 Accounting for the absolute threshold of hearing when analyzing low level sound Menachem Rafaelof

62 Psychological Effects

62.3 Hearing conservation programs

nc13_194 Noise control strategies: Lessons from Safe-in-Sound Excellence in Hearing Loss Prevention AwardsTM

Deanna K. Meinke, Thais C. Morata and Charles Hayden

62.5 Effects of noise on health

nc13_20 Characterization of the "Ranchlands' Hum"'; A Calgary community noise nuisance Michael Smith, Grimika Gupta, Emily Marasco, Marcia Epstein, Richard Patching,

Ken Scott and Spoorthi Nayak

63 Psychological Effects

nc13_164 Understanding and preserving quiet areas Nicholas P. Miller nc13_72 Acoustical challenges in long term care facilities Zohreh Razavi nc13_198 Psychoacoustic analysis of synthesized jet noise Selen Okcu, Jonathan Rathsam and Stephen A. Rizzi

63.2 Perceived noisiness, annoyance

nc13_3 A preliminary test conducted to understand perceptual characteristics of rotorcraft noise

Andrew McMullen, Patricia Davies and Selen Okcu nc13_45 A comparative analysis of the subjective assessment of standard and noise abatement

aircraft procedures Abhishek Sahai and Eike Stumpf nc13_50 Simulator study of indoor annoyance caused by shaped sonic boom stimuli with and

without rattle augmentation Jonathan Rathsam, Alexandra Loubeau and Jacob Klos nc13_76 The technical challenges of permitting power distribution and transmission systems

subject to ambient noise degradation standards Patricia Pellerin, Erik Kalapinski, Scott Noel and Tanya Ambrose nc13_134 Assessment of construction noise annoyance by construction machinery Sungchan Lee and Hyemi Lee nc13_147 Sound synthesis approach for noise annoyance assessment of rotorcraft operations D. Sabbatini, S. Hartjes, H.G. Visser, M. Gennaretti, G. Bernardini and K. Janssens

63.3 Speech intelligibility and interference, speech levels, speech communication

nc13_104 Speech privacy and single steel stud wall construction John LoVerde and Wayland Dong nc13_102 Evaluating anthropogenic noise effects on animal communication Robert J. Dooling, Sandra H. Blumenrath, Ed Smith and Kurt Fristrup

63.4 Sleep disturbance

nc13_142 Noise-induced sleep disruption among hospitalized patients: Brain-based approaches toward sleeping soundly on noisy nights

Jeffrey M. Ellenbogen nc13_187 Refinement of an ECG-based approach for detecting awakenings in a study on

aircraft noise-induced sleep disturbance Sarah McGuire and Mathias Basner

63.7 Sound quality

nc13_175 Identifying varying preferences in a paired comparison jury study using unsupervised clustering techniques

Glenn Pietila and Teik C. Lim nc13_176 Preserving and restoring authentic acoustic environments that will inspire the

American public Kurt Fristrup nc13_38 An indicator for rating environmental quality of urban parks Jan Jabben, Edwin Verheijen and Miriam Weber

nc13_83 Using sound enhancement techniques to define and refine vehicle interior sound image/quality

Rakesh Khurana, Jeffrey Orzechowski, Francois Orange, Patrick Boussard and Dennis Sulisz

nc13_128 Extending noise- and power-optimized fan selection into the sound quality domain using iso-acoustic and iso-power methods

David Nelson

65 Effects of Noise on Domesticated and Wild Animals

nc13_102 Evaluating anthropogenic noise effects on animal communication Robert J. Dooling, Sandra H. Blumenrath, Ed Smith and Kurt Fristrup

65.2 Wildlife

nc13_52 Underwater noise monitoring to predict marine life impacts during ocean floor rock blasting

Peter Guldberg and Ryan Callahan

69 Criteria and Rating of Noise

nc13_158 Value of a sound rating for dishwashers Kevin Herreman and Crystal Young nc13_161 Product Noise Rating (PNR) as applied to dishwashers: A test case Crystal Young and Kevin Herreman

70 ANALYSIS

71 Instruments for Noise and Vibration Measurement

nc13_135 Improving the quality of noise measurements Carsten Thomsen

71.1 Transducers

nc13_16 Recovery of the free sound field using particle velocity measurements Chuan-Xing Bi, Ding-Yu Hu and Yong-Bin Zhang nc13_21 Acoustical performance of two commercial windscreens Jerry G. Lilly nc13_199 Using the concept of constant divergence of the sound pressure level for determining

the free-field sensitivity of microphones by comparison Valentin Buzduga nc13_122 Advancements toward a high-powered carbon nanotube thin-film loudspeaker Andrew R. Barnard, Timothy A. Brungart, Timothy E. McDevitt, David M. Jenkins

and Brian L. Kline

nc13_199 Using the concept of constant divergence of the sound pressure level for determining the free-field sensitivity of microphones by comparison

Valentin Buzduga

72 Measurement Techniques

nc13_16 Recovery of the free sound field using particle velocity measurements Chuan-Xing Bi, Ding-Yu Hu and Yong-Bin Zhang nc13_39 Multi-function, multi-point measurement system including data recorder and

frequency analyser based on a dedicated computer and a multi-channel wireless sensor

Yasutaka Nakajima, Kenji Shinohara, Tetsuya Ozaki, Kiyokatsu Iwahashi, Yu Kurosawa, Yuichi Yonemoto, Toshihiro Ueta, Naru Sato, Daisuke Sakaue and Masaharu Ohya

nc13_135 Improving the quality of noise measurements Carsten Thomsen nc13_145 Time-domain ASQ method for pass-by noise engineering K. Janssens and F. Bianciardi nc13_185 Use of advanced tools and techniques to resolve an atypical parallel noise barrier

case Paul Burge, John Crawford and Peter Wasko

72.2 Vibration level

nc13_4 A simpler and effective method to perform building vibration analyses consistent with FTA's "detailed" method

Erich Thalheimer, Tom Herzog and Jacob Poling

72.3 Sound intensity

nc13_206 Imaging contributions to noise measures: The future for simulation tools Steffen Marburg

72.4 Sound power

nc13_23 Technical issues of the qualification method of the inverse square law characteristics for sound power determination of IT equipment

Ikuo Kimzuka, Masaki Suzuki, Akio Takanashi, Kouji Tanaka and Kohei Shimoda nc13_44 Considerations for improving the efficiency of daily calibration work of multi-channel

simultaneous measurement system for sound power level determination Kohei Shimoda, Ikuo Kimizuka, Shigeru Tashiro and Kouji Tanaka

72.5 Transmission loss

nc13_84 An empirical method to improve accuracy of in-situ sound power measurements of industrial equipment

Robert S. Johnson, Sr. and Frank H. Brittain nc13_17 Traditional and angle-dependent evaluation of a reverberant-anechoic transmission

loss suite Paul Bauch and Andrew R. Barnard nc13_133 Laboratory measurements of the reduction of various impact noise sources by floor

coverings Jinyun Chung and Bonggyu Cho nc13_152 High transmission loss glass wall design Isaac Old and Eddie Duncan

73 Test Facilities

nc13_17 Traditional and angle-dependent evaluation of a reverberant-anechoic transmission loss suite

Paul Bauch and Andrew R. Barnard nc13_105 Acoustical design of the perception based engineering laboratory at Ray W. Herrick

Laboratories Center for High Performance Buildings Nathan Bryce Sevener nc13_11 A simplified approach to simulating sonic booms indoors Clothilde Giacomoni and Patricia Davies nc13_43 Auralization architectures for NASA's next generation aircraft noise prediction

program Stephen A. Rizzi, Leonard V. Lopes, Casey L. Burley and Aric R. Aumann nc13_100 Calibration of a long-wavelength acoustic flowmeter using a lumped impedance

acoustic model Lee J. Gorny, Keith A. Gillis and Michael R. Moldover

74 Signal Processing

74.3 Digital processing and simulation

nc13_91 Simplify signal processing comparison with graphical system design Michael Denton and Kurt Veggeberg nc13_82 Experimental comparison of two active vibration control approaches: Velocity

feedback and negative capacitance shunt damping Benjamin Beck and Noah Schiller nc13_156 Active control of sinusoidal disturbances using inverse model LMS algorithm Mingfeng Li, Teik C. Lim and Jie Duan

74.5 Diagnosis and failure prediction

nc13_100 Calibration of a long-wavelength acoustic flowmeter using a lumped impedance acoustic model

Lee J. Gorny, Keith A. Gillis and Michael R. Moldover nc13_160 Time-frequency beamforming for nondestructive evaluations of plate using ultrasonic

Lamb wave Je-Heon Han and Yong-Joe Kim nc13_193 Protecting historic structures from construction vibration Rob Greene nc13_96 Qualification of air-conditioning unit base pan using Weibull analysis Parag H. Mathuria and Richard J. Wood

74.6 Source localization and transmission paths

nc13_69 Developing portable beam-forming device to detect squeak and rattle noise sources Youngkey K. Kim, Seongil Hwang, Jungoo Kang, Kang-Duk Ih and Yang-Hann Kim nc13_206 Imaging contributions to noise measures: The future for simulation tools Steffen Marburg

74.7 Processing by microphone arrays

nc13_39 Multi-function, multi-point measurement system including data recorder and frequency analyser based on a dedicated computer and a multi-channel wireless sensor

Yasutaka Nakajima, Kenji Shinohara, Tetsuya Ozaki, Kiyokatsu Iwahashi, Yu Kurosawa, Yuichi Yonemoto, Toshihiro Ueta, Naru Sato, Daisuke Sakaue and Masaharu Ohya

nc13_69 Developing portable beam-forming device to detect squeak and rattle noise sources Youngkey K. Kim, Seongil Hwang, Jungoo Kang, Kang-Duk Ih and Yang-Hann Kim nc13_160 Time-frequency beamforming for nondestructive evaluations of plate using ultrasonic

Lamb wave Je-Heon Han and Yong-Joe Kim

74.8 Frequency domain and spectral analysis

nc13_91 Simplify signal processing comparison with graphical system design Michael Denton and Kurt Veggeberg

75 Methods of Mathematical Modeling

nc13_168 A spectro-geometric method for the vibration analysis of built-up structures Shiliang Jiang, Wen L. Li and Tiejun Yang nc13_203 Simulation of random response of typical honeycomb panels subjected to a diffuse

sound field Bryce Gardner, Ignatius Vaz and Mohamed Ali Hamdi

75.1 Statistical methods

nc13_118 An ambient noise model for background noise corrections Charles Oppenheimer and Seth Bard

75.2 Statistical energy analysis

nc13_157 Statistical energy analysis model of a dishwasher Kevin Herreman

75.3 Finite element methods

nc13_33 Comparison of finite element models for residential building walls and low frequency sound transmission

Beom Soo Kim and Victor W. Sparrow nc13_35 Finite element analysis of vibro-acoustic response of sandwich plates with corrugated

cores subject to airborne excitation Yibo Wang, Hui Zheng and Zhiping Wei nc13_59 Embedded mechanical bandpass filters using acoustic metamaterial waveguides

coupled by cavity modes Hongfei Zhu and Fabio Semperlotti nc13_65 Selection of appropriate models and implementation of efficient computational

strategies for modeling porous materials in a vibro-acoustic context Jean-Pierre Coyette, David Burd, Erwan Jacq, Gregory Lielens, Benoît Van den

Nieuwenhof and Bernard Van Antwerpen nc13_173 Computational aeroacoustic modeling of open fan and comparison of predicted and

experimental noise fields Sitae Kim, Yaying Niu and Yong-Joe Kim

75.6 Modal analysis

nc13_60 Holographic visualization of sound radiation from computer hard drives Yong Thung Cho and J. Stuart Bolton nc13_200 Effect of rotation on the natural frequencies of coupled tire structural-acoustic modes Rui Cao and J. Stuart Bolton

75.7 Imaging of acoustical and vibrational fields

nc13_15 Transient, planar, nonlinear acoustical holography for reconstructing acoustic pressure and particle velocity fields

Yaying Niu and Yong-Joe Kim nc13_63 The procedures of mapped radiation mode analysis based near-field acoustic

holography Haijun Wu, Weikang Jiang and Haibin Zhang

nc13_116 Sound field reconstruction at high frequencies by using a piece-wise interpolation method

Yangfan Liu and J. Stuart Bolton nc13_125 Near-field structure-borne sound holography: Theory vs. practice Dietmar Greussing nc13_148 Acoustical holography imaging of full-scale jet noise fields Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James nc13_149 Acoustical holography and proper orthogonal decomposition methods for the

analysis of military jet noise Alan T. Wall, Kent L. Gee, Tracianne B. Neilsen and Michael M. James

75.9 Analytical models

nc13_6 Noise transmission loss of sandwich composite panels with passive layered control treatments

Sebastian Ghinet, Haisam Osman and Anant Grewal

76 Modeling, Prediction and Simulation

76.1 Propagation models, noise levels

nc13_74 Practical aircraft simulation noise modeling Troy D. Schultz, Joseph J. Czech and Kenneth J. Plotkin

76.4 Computer software programs

nc13_85 Physics based spatial acoustics in virtual scenes Steven G. Mattson, Michael Williams, Ryan Schneider and Darrel Younk

77 Sampling, Quality Control Procedures and Measurement Uncertainty

nc13_90 Simulating the variance of Sound Transmission Class ratings from real measurement parameters

Elliot Dick and David Berg

80 REQUIREMENTS

81 Standards nc13_9 Revision of ISO 9296 - International rules for declaration of IT equipment noise

emissions embark upon new era Ikuo Kimizuka

82 National Government Legislation and Regulations

nc13_46 Community based social marketing process to define measures for low noise behavior with outdoor machinery

Sebastian Wschiansky, Maja Fischer and Stephanie Moser nc13_73 Proceedings in regulating private noise sources in sensitive areas in Germany Christian Fabris nc13_153 Noise measurements and regulatory evaluations for three wastewater treatment

plants Jeff D. Szymanski

83 State and Local Legislation and Regulations

nc13_40 Large-scale calculation of possible locations for specific wind turbines under consideration of noise limits

Fabian Probst, Wolfgang Probst and Bernd Huber

85 Ordinances, including Zoning Requirements

nc13_144 Limitations of noise ordinances for addressing substation noise Damien Bell nc13_166 Using public input to develop scientifically sound noise pollution policy for Vermont's

rural land uses and communities: Methodology and initial results Eddie Duncan

86 Building Codes

nc13_136 Degradation in airborne sound isolation due to structural loading in wood frame buildings and meeting building code requirements

Alicia J. Wagner Larsen