Subaru to Exhibit Semi-Trash Pumps at World of … solids sucked through the strainer, while an...

3
FOR IMMEDIATE RELEASE Contacts: Pam Meyer 847-847-2963 [email protected] Subaru Industrial Power Products Rachel Gibbons 701-373-0062 [email protected] IRONCLAD Marketing Subaru to Exhibit Semi-Trash Pumps at World of Concrete 2016 LAS VEGAS (Feb. 2, 2016) — Suitable for handling water with small solids and light debris, Subaru semi-trash pumps offer a heavy-duty overhead cam gasoline engine, a large volute discharge opening and dependable performance. The line is backed by Subaru’s 5-year limited warranty, covering both the engine and pump. Subaru will exhibit its semi-trash pumps on Feb. 2-5, 2016 at booth C4537 during World of Concrete in Las Vegas. Subaru’s line of semi-trash pumps consists of two models: the PKX201ST and the PKX301ST. The 2-inch PKX201ST is powered by the Subaru EX13, a 4.5-horsepower engine, and provides a delivery volume of 153 gallons per minute. The 3-inch PKX301ST offers a delivery volume of 246 gallons per minute and is driven by the EX17, a 6.0-horsepower engine. The pump and engine built as an integrated unit provides maximum performance and dependability. The semi-trash pumps are constructed with heavy-duty materials to offer durability for the most demanding job sites. A hardened cast-iron volute effectively withstands suspended particles and small solids sucked through the strainer, while an abrasion-resistant, cast-iron three-blade impeller and a replaceable wear plate ensure long life and low maintenance. After adding water to the pump casing, the semi-trash pumps are self-priming, and the advanced volute design drives water straight into the cavity for fast priming. The silicon-carbide seal increases the durability of the self-lubricating mechanical seal and provides many hours of trouble-free service.

Transcript of Subaru to Exhibit Semi-Trash Pumps at World of … solids sucked through the strainer, while an...

Page 1: Subaru to Exhibit Semi-Trash Pumps at World of … solids sucked through the strainer, while an abrasion-resistant, cast-iron three-blade impeller and a replaceable wear plate ensure

FOR IMMEDIATE RELEASE

Contacts:

Pam Meyer 847-847-2963

[email protected] Subaru Industrial Power Products

Rachel Gibbons

701-373-0062 [email protected]

IRONCLAD Marketing

Subaru to Exhibit Semi-Trash Pumps at World of Concrete 2016

LAS VEGAS (Feb. 2, 2016) — Suitable for handling water with small solids and light debris,

Subaru semi-trash pumps offer a heavy-duty overhead cam gasoline engine, a large volute

discharge opening and dependable performance. The line is backed by Subaru’s 5-year limited

warranty, covering both the engine and pump. Subaru will exhibit its semi-trash pumps on Feb.

2-5, 2016 at booth C4537 during World of Concrete in Las Vegas.

Subaru’s line of semi-trash pumps consists of two models: the PKX201ST and the PKX301ST.

The 2-inch PKX201ST is powered by the Subaru EX13, a 4.5-horsepower engine, and provides a

delivery volume of 153 gallons per minute. The 3-inch PKX301ST offers a delivery volume of

246 gallons per minute and is driven by the EX17, a 6.0-horsepower engine. The pump and

engine built as an integrated unit provides maximum performance and dependability.

The semi-trash pumps are constructed with heavy-duty materials to offer durability for the most

demanding job sites. A hardened cast-iron volute effectively withstands suspended particles and

small solids sucked through the strainer, while an abrasion-resistant, cast-iron three-blade

impeller and a replaceable wear plate ensure long life and low maintenance. After adding water

to the pump casing, the semi-trash pumps are self-priming, and the advanced volute design

drives water straight into the cavity for fast priming. The silicon-carbide seal increases the

durability of the self-lubricating mechanical seal and provides many hours of trouble-free

service.

Page 2: Subaru to Exhibit Semi-Trash Pumps at World of … solids sucked through the strainer, while an abrasion-resistant, cast-iron three-blade impeller and a replaceable wear plate ensure

A rugged, long-lasting strainer is standard and protects pump components from large solids,

while the hole diameter helps prevent large debris from entering the suction hose. A strong

aluminum die-cast housing withstands the debris allowed. For durability and protection, a heavy-

duty steel roll cage wraps around the entire pump. Other standard features include a toolkit and

hose band.

The semi-trash pumps offer a low-tone muffler and a sound-suppressing air cleaner for quiet

operation and meet EPA/CARB emission standards. The pumps also feature a U.S. Forest

Service-approved spark arrestor.

The automatic decompression, easy-pull recoil starter and Hot Spark® ignition system provide

easy and reliable starting. The large-capacity fuel tank extends operation time, while its special

coating helps prevent rust from forming inside the tank. A large fuel opening allows easy

pouring and the cleanable mesh intake strainer helps prevent debris from reaching the engine.

Four extra-large anti-vibration mounts ensure a smooth-running engine and keep the unit from

shifting during operation.

Routine maintenance can be completed in the field with common hand tools. Four stainless steel

cap screws hold together the aluminum casings, and all wear parts are exposed when the cover is

removed, making maintenance convenient. The large plastic plugs make draining and filling

easier and eliminate corrosion between the plugs and casing. Additionally, suction and discharge

nipples have standard NPT fittings for quick, easy hose connections.

About Subaru Industrial Power Products

Subaru Industrial Power Products is a subsidiary of Fuji Heavy Industries Ltd., Tokyo. Fuji

Heavy Industries is a diversified global manufacturer of Subaru automobiles, aircraft, industrial

engines and equipment. Subaru Industrial Power Products is responsible for sales and support of

Subaru industrial engines and power products in North America. For more information, contact

Subaru Industrial Power Products, 905 Telser Road, Lake Zurich, IL 60047, call 847-540-7300,

email [email protected], visit www.subarupower.com or find us on Facebook. Learn

more about our products by viewing our videos on YouTube.

###

Page 3: Subaru to Exhibit Semi-Trash Pumps at World of … solids sucked through the strainer, while an abrasion-resistant, cast-iron three-blade impeller and a replaceable wear plate ensure

Suggested Tags:

Semi-Trash pump, dewatering pump, World of Concrete, Subaru Industrial Power Products

Suggested Social Posts:

Facebook: @Subaru Industrial Power Products will exhibit its semi-trash pumps at @World of

Concrete. Swing by booth C4537 to see Subaru’s pumps, along with their other generator and

engine products #WOC2016. {Include Link & Photo}

Twitter: At #WOC2016 check out booth C4537 to see Subaru Industrial Power Products’

generators, pumps and engines. {Include Link & Photo}

LinkedIn: Subaru Industrial Power Products will exhibit its semi-trash pumps at World of

Concrete along with their other products including generators and engines. Find Subaru at booth

C4537. {Include Link & Photo}