Sub: Invitation of RE-E-tender for procurement of Medical...

C:\Users\Administrator\Desktop\Medical Equipment & Instruments 2016 (RETENDER) Two Bid System 08.11.2016.doc - 1 -

TENDER NO. 40/2016

Tender No. 412.U/16/30/3/Proposal/10-11 (Medical College)/Vol V Dated: 29.09.2016.

Sub: Invitation of RE-E-tender for procurement of Medical Equipments & Instruments (Two Bid)

Period for submission of e-Tender form From 06/10/2016 to 08/11/2016 Upto 2 PM

Pre-Bid meeting 06/10/2016 & 25/10/2016 at 2.30

PM

Last Date & Time of submission of e-tender 08/11/2016 upto 2.00 PM

Date & Time of Opening of e-Tender 08/11/2016 at 2.30 PM

Bid Security / Earnest Money to be sent through

Post/Delivered in hand

As mentioned in Annexure IV

Performance security / Security Deposit Money A Sum equivalent to 10 % of the bid value

INSTRUCTIONS FOR E-TENDERING All vendors/contractors are required to procure Class-IIIB Digital Signature certificate (DSC) with Both DSC Components i.e. Signing & Encryption to participate in the E-Tenders.

a. Vendor should get Registered at https://esictenders.eproc.in (No charges). However, those vendors who had already registered earlier in the old web portal need not register again.

b. Vendor also needs to submit Bid Processing Fee charges of Rs.2495/- (non-refundable) in the form of Demand Draft from any scheduled bank, in favour of M/s C1 India Pvt. Ltd. Payable at New Delhi for participating in the Tender.

c. Vendor needs to submit the Demand Draft for bid Processing Fee at the under mentioned Registered Address for successful submission of Tender, failing which, the vendor will not be able to participate in the e-tender. Along with the Demand Draft, vendor needs to send a covering letter mentioning about the payment details, company name, address, payment towards ESIC Bid Processing Fees (mention theTender ID and Tender Title) at the under mentioned address, one day before the due date and time of bid submission:

Kind Attn: Mr Mohit Chauhan C1 India Pvt. Ltd., 301, Gulf Petro Chem Building, 1st Floor, Udyog Vihar, Phase – 2, Gurgaon, Haryana – 122015 Note: Payment will be approved only after physical receipt of Demand Draft.

d. The vendor also needs to mention his company name, address, ESIC Bid Processing fees mentioning the Tender ID and Tender Title (at the back side of the Demand Draft of Rs. 2495/-).

e. Vendors also need to send the scanned copies of Demand Draft to [email protected] mentioning their Company Name, Address, Tender ID and Tender Title for approval of Bid Processing Fees at the back side of Demand Draft.

f. The bid can be uploaded upto 2PM on dated 08/11/2016 and any bid upload after the prescribed time shall not be considered irrespective of rates. The bid will be opened on the same dated i.e. on 08/11/2016 at 2.30 PM.

g. The Bidder should carefully read, understand and seek clarifications if any before uploading the bid. No claim whatsoever will be entertained for any alleged ignorance thereof.

ESI-PGIMSR, ESIC MEDICAL COLLEGE & EMPLOYEE’S STATE INSURANCE CORPORATION HOSPITAL & ODC (EZ)

(A Statutory Body Under Ministry of Labour, Govt. of India) DIAMOND HARBOUR ROAD, P.O.: JOKA, KOLKATA-700 104

An ISO 9001:2008 Certified

Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764, Email Id- [email protected]

https://esictenders.eproc.in/

mailto:[email protected]



HELPDESK NUMBERS

Sl.No. Name e-mail Phone no.

1 Mr. Elavarasan Raghunathan

[email protected] +91-022-66865600/10/11/+91-8655995550

2 Ms. Anjali Thombare [email protected] +91-022-66865600/10/11

3 Mr. Vijay Kalra [email protected] +91-0124-4302034/+91-9711770455

4 Mr. Ashish Kumar [email protected] +91-0124-4302034/+91-9971556555

5 Mr. Saurav Gautam [email protected] +91-0124-4302037/+91-9911874555

6 Mr. Partha Ghosh [email protected] +91-8811093299

7 Mr. Mohit Chauhan [email protected] +91-124-4302033

FOR ESCALATIONS CONTACT

Name Email 1. Mr. Ashish Goel [email protected] 2. Mr. Nimesh Bhardwaj [email protected] 3. Mr. Achal Garg [email protected]












TENDER NO. 40/2016


Sub: Invitation of RE-E-tender for procurement of Medical Equipments & Instruments (Two Bid)

From: The Medical Superintendent,

ESIC Hospital & O.D.C. (E.Z), Diamond Harbour Road, P.O.: Joka, Kolkata: 700 104.

To: ___________________________________ ___________________________________ Sir(s),

The Medical Superintendent invites open Re-e-tender for procurement of Medical Equipments & Instruments at ESIC Hospital Joka” as per specifications and/or quantities detailed

in the Schedule attached. The “Tender Documents” comprising the General Terms and Conditions of Contract (Annexure I) and the Special Terms and Conditions of Contract (Annexure II) which will

govern any contract made, the Tender Application Form (Annexure III), specification of Medical Equipments & Instruments (Annexure lV) and the Schedule of contract / specifications of items /

proforma for quoting rates (Annexure V) are enclosed herewith. If you are in a position to quote for the contract /supply in accordance with the requirements stated in the attached schedule, please submit your quotation to this office.

Tenderers are requested that, before quoting their rates or filing tender, the tender form may please be read out thoroughly (line by line), otherwise purchaser will not be held responsible for any error / oversight of his own.

The form is a Standard Form of Tender. Certain clause /clauses may not be applicable in some cases. So, Tenderers are requested to ignore such clause /clauses, which is/are not applicable in the instant case.

All the payment shall be made by Demand Draft drawn in favour of ESI Fund A/c No.1, payable at Kolkata. Cheques/cash will not be accepted.

If any modification of the schedule is considered necessary, you should communicate the same by means of separate letter sent along with the Tender.

Medical Superintendent, ESIC Hospital & ODC (E.Z), Joka, does not pledge himself to accept

the lowest or any tender and reserve to himself the right of accepting the whole or any part of the



An ISO 9001:2008 Certified

Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764, Email Id- [email protected]



tender or portion of the quantity offered and you shall supply the same / execute the work at the rate quoted by you. You are at liberty to tender for the whole or any part.

Acceptance by the purchaser shall be communicated in due course. You are requested that the

instructions contained in the said communication should be acted upon immediately / as asked for.

THE FIRM IS REQUESTED TO FOLLOW THE CHECK LIST AT THE TIME OF SUBMISSION OF TENDER DOCUMENT WITHOUT WHICH THE OFFER IS LIABLE TO BE CANCELLED.

CHECK LIST

1 Earnest Money Deposit by Demand Draft only Submitted [Yes/No]

2 Valid Trade Licence Submitted [Yes/No]

3 PAN/TAN other statutory documents Submitted [Yes/No]

4 Warranty Certificate: At least for two years[except item Sl.NO. 1 of department of anaesthesiology where warranty is mentioned in the respective specification]

Submitted [Yes/No]

5 VAT/CST certificate clearly showing the class/classes of goods/services for which VAT/CST registration has been obtained

Submitted [Yes/No]

6 Mandatory CMC for Five years after warranty Certificate along with rates[except item Sl.NO. 1 of department of anaesthesiology where warranty is mentioned in the respective specification]

Submitted [Yes/No]

7 Mandatory spare parts availability for five years after warranty Certificate Submitted [Yes/No]

8 Name & Address of Service Centre in and around Kolkata Submitted [Yes/No]

9 Certificate regarding provision of free calibration certificate for medical equipments for 07 years

Submitted [Yes/No]

10 Expected life of equipment certificate Submitted [Yes/No]

11 The Certificate that the quoted equipment have not been and are not being supplied to any other organization at a rate lower than being quoted here.

Submitted [Yes/No]

12 A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment., if applicable.

Submitted [Yes/No/NA]

Note: If valid trade licence constitutes/consists of more than one certificate/page then all the pages are to be enclosed failing which tender is liable to be cancelled.

Yours faithfully,

MEDICAL SUPERINTENDENT Enclosures:

Annexure – I (General Tender Terms & Conditions)

Annexure – II (Special Tender Terms & Conditions)

Annexure – III (Tender Application Form)

Annexure – lV (Specification of Medical Equipments & Instruments )

Annexure – V (Proforma for quoting rates) – Sheet I & Sheet II


Annexure-I

TENDER NO. 40/2016


GENERAL TERMS AND CONDITIONS

Period for submission of e-Tender form From 06/10/2016 to 08/11/2016 Upto 2 PM

Pre-Bid meeting 06/10/2016 & 25/10/2016 at 2.30 PM

Last Date & Time of submission of e-tender 08/11/2016 upto 2.00 PM

Date & Time of Opening of e-Tender 08/11/2016 at 2.30 PM

Bid Security / Earnest Money to be sent through Post/Delivered

in hand

As mentioned in Annexure IV

Performance security / Security Deposit Money A Sum equivalent to 10 % of the bid value

INSTRUCTIONS

INSTRUCTIONS FOR E-TENDERING All vendors/contractors are required to procure Class-IIIB Digital Signature certificate (DSC) with Both DSC Components i.e. Signing & Encryption to participate in the E-Tenders.

a. Vendor should get Registered at https://esictenders.eproc.in (No charges). However, those vendors who had already registered earlier in the old web portal need not register again.

b. Vendor also needs to submit Bid Processing Fee charges of Rs.2495/- (non-refundable) in the form of Demand Draft from any scheduled bank, in favour of M/s C1 India Pvt. Ltd. Payable at New Delhi for participating in the Tender.

c. Vendor needs to submit the Demand Draft for bid Processing Fee at the under mentioned Registered Address for successful submission of Tender, failing which, the vendor will not be able to participate in the e-tender. Along with the Demand Draft, vendor needs to send a covering letter mentioning about the payment details, company name, address, payment towards ESIC Bid Processing Fees (mention theTender ID and Tender Title) at the under mentioned address, one day before the due date and time of bid submission:

Kind Attn: Mr Mohit Chauhan C1 India Pvt. Ltd., 301, Gulf Petro Chem Building, 1st Floor, Udyog Vihar, Phase – 2, Gurgaon, Haryana – 122015 Note: Payment will be approved only after physical receipt of Demand Draft.

d. The vendor also needs to mention his company name, address, ESIC Bid Processing fees mentioning the Tender ID and Tender Title (at the back side of the Demand Draft of Rs. 2495/-).

e. Vendors also need to send the scanned copies of Demand Draft to [email protected] mentioning their Company Name, Address, Tender ID and Tender Title for approval of Bid Processing Fees at the back side of Demand Draft.

f. The bid can be uploaded upto 2PM on dated 08/11/2016 and any bid upload after the prescribed time shall not be considered irrespective of rates. The bid will be opened on the same dated i.e. on 08/11/2016 at 2.30 PM.

g. The Bidder should carefully read, understand and seek clarifications if any before uploading the bid. No claim whatsoever will be entertained for any alleged ignorance thereof.


(A Statutory Body Under Ministry of Labour, Govt. of India)

DIAMOND HARBOUR ROAD, P.O.: JOKA, KOLKATA-700 104 An ISO 9001:2008 Certified

Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764 Email Id- [email protected]

https://esictenders.eproc.in/




1. PREPARATION OF TENDER:

The Tenderer shall give full assistance and information as may be required in connection with the contract to the Medical Superintendent or any other officer nominated by him to inspect the premises of the tenderer at all reasonable times.

2. SIGNING OF TENDER:

a) The tender is liable to be rejected if complete information is not given therein or if the particulars and date (if any) asked for in the tender are not duly & fully filled in. Particular attention may be given to the dates of delivery and also to the particulars referred to in the conditions of contract so as to comply with them.

b) Individuals signing tender or other documents connected with the contract must specify: i) Whether signing as a „Sole Proprietor‟ of the firm or his Attorney? ii) Whether signing as a „Registered Active Partner‟ of the firm or his Attorney? iii) Whether signing for the firm „Per Procreation‟?

In the case of companies and firms registered under the Indian Partnership Act, the capacity in which signing e.g. Secretary, Manager, and Partner etc. or their attorney and produce copy of documents, empowering him to do so, if called upon to do so. NOTE: In case of unregistered firms, all the members or all Attorneys duly authorised by all of them or the Manager of the firm should sign the tender and subsequent documents. 3. LATEST HOUR FOR RECEIPT OF THE TENDER: e-Tender shall be submitted within the stipulated date and time. In the event of the stipulated date of opening of the tender being declared a closed holiday for Govt. Offices, the date of opening of the tender (s) will be the next working day. 4. PERIOD FOR WHICH THE OFFER WILL REMAIN OPEN:

i) All tenders should remain valid for acceptance for a period of twelve months from the date of opening of the tender or for such period as stated in Special Terms & Conditions.

ii) The contract / tender, if awarded, shall be valid initially for one year from the date of award of Contract subject to continuous satisfactory performance and on failure on this aspect by the contractor, the Competent Authority will reserve the right to terminate the contract. The period of the contract can be extended for further period at the discretion of the Competent Authority, to a maximum of one year, on terms and conditions of the hospital, while accepting the tender subject to continuous satisfactory performance.

iii) Quotations qualified by such vague and indefinite expressions such as „subject to immediate acceptance‟; „subject to prior sale‟ etc. will not be considered.

5. OPENING OF E- TENDER: The tender shall be opened on the date and time mentioned here in the document. 6. PRICES:

Prices quoted must be meaningful and measurable in the context. Price must be clearly shown in figures and words in Indian Currency. Tenderers should clearly specify whether prices quoted are inclusive of Sales Tax/VAT/duties/statutory charges or such charges as extra. Where no specific mention is made to Sales Tax/VAT/or other duties, prices quoted shall be deemed to be inclusive of such taxes/charges.

7. DELIVERY TERMS

a) The delivery of the stores / execution of work / providing the services etc. are required within a period as specified and as the place mentioned therein.

b) The tenderer shall deliver the stores/ execute the work at the destination / space defined to the consignee / authority in good order (of which the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, Kolkata shall be


the sole judge) within the limits of the time as deemed reasonable and specify in such quantities/qualities as may be ordered by him from time to time.

c) Time for and date of delivery: The essence of contract: - The time for and the date of delivery of the stores / date of execution of work as stipulated in the schedule shall be deemed to be the essence of contract and delivery / execution must be completed not later than the date(s) specified.

d) The Medical Superintendent may allow additional time under special circumstances such as strikes, lockouts, fire accidents, riots etc.

8. INSPECTION OF STORES /WORK: Supplies shall be accepted/work shall be certified as completed subject to inspection by Medical Superintendent, ESIC Hospital & ODC (EZ), Joka or his assigned representative. Any defect found in the materials / work done will render the supplies/work open to rejection and decision of the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, shall be final and legally binding. The rejected store shall be returned to the suppliers/work may be executed through others, at the risks and costs of contractor . 9. OTHER TERMS

A. Responsibility for executing Contract: The Contractor/Supplier is to be entirely responsible for the execution of the contract in all respects in accordance with the terms and conditions as specified in the acceptance of tender.

B. The Contractor/Supplier shall not sublet transfer or assign the contract to any part thereof without the written permission of the Medical Superintendent. In the event of the Contractor/Supplier contravening this condition, Medical Superintendent be entitled to place the contract elsewhere on the Contractors/Suppliers account at his risk and the Contractor/Supplier shall be liable for any loss or damage, which the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, may sustain in consequence or arising out of such replacing of the contract.

c. Earnest Money: The tenderer shall have to deposit earnest money as mentioned in Annexure IV with their tender, failing which the tender is liable to be rejected. The earnest money is to be paid by Demand Draft drawn in favour of ESI Fund A/c No. 1, payable at Kolkata. NO CHEQUES WILL BE ACCEPTED. In the event of the withdrawal / revocation of tenders before the date specified for acceptance, the earnest money shall stands forfeited. In the event of acceptance of the tender the earnest money may be adjusted towards the amount of security required to be deposited by the contractor in terms of Clause mentioned below, the earnest money will however, be returned without interest to the tenderer whose tender is not accepted. Earnest Money demand draft must be sent by Speed Post/delivered in hand so as to reach on and before the closing date and time of the tender to the following address to „The Medical Superintendent‟, ESIC Hospital & O.D.C. (E.Z), Diamond Harbour Road, P.O.: Joka, Kolkata, 700 104, West Bengal‟. At the top of the cover,

the following words should be written in block letters “procurement of Medical Equipments &

Instruments” along with “Tender No. 40 /2016”, failing which the tender is liable to be rejected. d. Security Deposit: On acceptance of the tender, within the period specified by the Medical Superintendent, the

contractor shall deposit as security. deposit 10% of the tender amount The hospital authority shall be entitled to forfeit the Security Deposit or any part thereof without prejudice to any other remedies provided in the contract or available under the law. The security shall be in the form of Demand Drafts payable at Kolkata in favour of ESI Fund A/c. No. 1 or in the form of Bank Guaranteee. a) If the contractor fails in fulfilling above-mentioned terms and conditions, such failure will constitute a breach

of the contract and the Medical Superintendent shall be entitled to make other arrangements at the risk and expense of the contractor.

b) On due performance and completion of the contract in all respects, the Security Deposit will be returned to the contractor without any interest on presentation of an absolute ‘No Demand Certificate’ in the prescribed form and upon return in good condition of any specifications, samples or other property belonging to the purchaser, which may have been issued to the contractor.

e. Recovery of sums due: Whenever any claim for the payment of a sum of money arises out of or under this

contract against the contractor the purchaser shall be entitled to recover of such sum by appropriating, in part or whole the security/earnest money deposited by the contractor, when the balance or the total sum to be recoverable, as the case may be shall be deducted from any sum then due or which at any time thereafter may become due to recoverable under this or any other contract with the purchaser. Should this sum not be


sufficient to cover the full amount recoverable, the contractor shall pay to the purchaser on demand the remaining balance due.

f. Insolvency and breach of contract: The Medical Superintendent may at any time by notice in writing summarily terminate the contract without compensation to the contractor in any of the following events, that is to say:-

i) If the contractor being an individual or if firm, any partner in the contractor’s firm, shall at any time be adjudged insolvent or shall have a receiving order or orders for administration of his estate made against him or shall take any proceedings for liquidation or composition under any insolvency not for the time being in force or shall make any convenience or assignment of his efforts or enter into any arrangements or composition with his creditors or suspend payment of if the firm be dissolved under partnership act, or

ii) If the contractor being a company shall pass a resolution or the court shall make an order for the liquidation of the affairs or a receiver of Manager on behalf of the debenture holder shall be appointed or circumstances shall have arisen which entitled the court or debenture holders to appoint a receiver or Manager.

iii) If the contract commits any breach of this contract not herein specifically proved for: Provided always that such determination shall not prejudice any right of action or remedy which shall have accrued or shall accrue thereafter to the purchaser and provided also that the contractor shall be liable to pay the purchaser for any extra expenditure, he is thereby put to but shall not be entitled to any gain on repurchased.

g. Arbitration: In the event of any dispute or difference arising out of the terms and conditions laid down in this tender, the same shall be referred to Arbitrator appointed by the medical superintendent. The procedure of the Arbitration will be governed by the provisions Arbitration Act 1996.

h. Document: The tenderer should have a valid Trade licence, VAT, PAN / TAN and produce self copies of such certificates along with the tender papers, failing which the tender is liable to be rejected.

i. Statutory requirements: In case the agency appoints manpower / labour in excess of or equal to the number as specified by law, the agency should comply with all statutory enactments including Contract Labour Regulation and Abolition Act, 1970; Minimum Wages Act where applicable; Payment of wages Act, where applicable; ESI Act, 1948, where applicable; EPF Act, 1952, where applicable; etc. All existing statutory liabilities relating to engagement of personnel related to labour laws shall be sole responsibility of the agency. In that case the successful agency will have to obtain a licence from the licensing officer after collecting the requisite certificate in form V from the hospital authority. The successful agency will have to maintain various registers and records, display notices, abstracts of the rules, etc., and issue employment card to the engaged labours. The list of workers employed by the contractor shall be communicated to the authority from time to time.

j. The successful bidder/tenderer shall obtain a valid license under the Contract Labour (R & A) Act, 1970 & Rules framed there under and shall continue to hold it till completion of the contract wherever applicable,

k. Right to accept / reject: The hospital authority reserves the right to reject any or all tender without assigning any reason whatsoever. Also, the hospital authority reserves the right to award any or part or full contract to any successful agency at its discretion and this will be binding on the tendered.

l. Assistance to contractor: The contractor shall not be entitled to assistance either, in the procurement of raw materials required for the fulfilment of the contract or in the securing of transport facilities.

m. The tenderer should have a place of business in and around Kolkata and the complete Postal Address, Telephone / Mobile / Fax / E-mail address, etc. should be provided, while submitting the completed tender form.

n. The list of personal deployed to be intimated to the authority from time to time. The personal employed by the tenderer should have proper uniform for identification.The persons so deployed shall not have any claim for permanent absorption in the hospital and such claim if raised shall be violation of the terms and conditions of the agreement of the hospital authority shall have the right to cancel the agreement to terminate such deployment termination.

o. The contractor will be responsible for such conduct of the persons engaged by him in the hospital, which will be conducive for maintaining as harmonious atmosphere as expected in the hospital and will be responsible for any act & omission of such persons.

p. In the event of any violation of laws, rules, statutory provisions by the contractor, this will amount to breach of contract and in such case, the hospital will have the right for terminating the contract, forthwith, without giving any notice or assigning any reason.

q. Validity of Contract: The contract, if awarded, shall be valid initially for one year from the date of award subject to continuous satisfactory performance. The period of the contract can be extended for further period at the discretion of the Competent Authority, to a maximum of one year, on terms and conditions of the hospital, while accepting the tender subject to continuous satisfactory performance. However, on failure on this aspect by the contractor, the hospital will have the right to terminate the contract forthwith in addition to forfeiting the


security amount deposited by the contractor and initiating administrative actions for black listing, etc. solely at the discretion of the hospital authority. This period of one year can further extended to a maximum of one year at the sole discretion of hospital authority without prejudice to any other right of the hospital authority.

r. The Tenderers will quote the rates in respect of jobs / services described above in various paras and shall fill

Annexure - V appended herewith along with the Tender Application form. s. The successful agency shall have to enter in to an agreement with the Hospital and the cost incurred in this

connection, shall have borne by the contractor. t. The rate once accepted by the hospital shall remain unaltered through the period of contract ,including any

extended period u. Medical Superintendent, ESIC Hospital & ODC (E.Z), Joka, does not pledge himself to accept the lowest or any

tender and reserve to himself the right of accepting the whole or any part of the tender or portion the quantity offered and you shall supply the same /execute the work at the rate quoted by you. You are liberty to tender for the whole or any part.

v. Acceptance by the purchaser shall be communicated in due course. You are requested that the instruction contained in the said communication should be acted upon immediately/as asked for.

w. The hospital authority reserve the right to award any part or full contract to any successful agency (ies) at its discretion and this will be binding on the Tenderers.

x. Failure and Termination: If the contractor fails to deliver the stores or any instalments thereof within the period prescribed for such delivery in the contract or any time liquidation the contract before the expiry of such period, Medical Superintendent may without prejudice to his right to recover damages for breach of the contract, be entitled at his option.

a. To recovery from the contractor as agreed liquidated damages, by way of penalty a sum equivalent to 2% of the price of any stores/services which the contractor has failed to deliver within the period fixed for delivery for the schedule for each month or part of the month during which the delivery of such stores may be in arrears, where delivery thereof is accepted after expiry of the aforesaid period, or

b. To purchase elsewhere, without notice to the contractor, on his account and at the risk of the contractor, the stores/services not delivered or store/services of similar description (where stores/services exactly complying with the particulars are not in the opinion of the Medical Superintendent, ESIC Hospital & ODC (E.Z), Joka, readily procurable such opinion being final). Without cancelling the delivery in respect of the consignments not yet due for delivery or

c. To cancel the contract or a portion thereof, and if so decided to purchase or authorise to purchase of store/services not so delivered or other of a similar description (where store/services exactly complying with the particulars are not, in the opinion of the Medical Superintendent readily procurable, such opinion being final) at the risk and cost of the contractor.

MEDICAL SUPERINTENDENT


Annexure-II

TENDER NO. 40/2016


SPECIAL TERMS AND CONDITIONS

The following special terms and conditions shall apply for RE-E-Tender for Procurement of Medical Equipments & Instruments (Two Bid). A.

1.0. The Tenderers should have a place of business in and around Kolkata and the complete Postal Address, telephone / Mobile / Fax / E-mail address, etc. while submitting the completed tender form.

2.0. The agency while submitting their tender form shall enclose Photostat copies of trade licence essential for carrying out the activities under reference, Sales tax / VAT, PAN and any such other documents specified hereto. Tender form incomplete in any respect and not supported with Earnest Money and the above-mentioned requisite documents, will be summarily rejected by the hospital.

3.0. The Competent Authority reserves the right to reject any or all tenders without assigning any reason whatsoever.

B.INSPECTION / INSTALLATION OF ITEMS / EQUIPMENTS: Supplies shall be accepted and work shall be certified as completed subject to satisfactory and complete

installation (upto full potentials claimed for that respective equipment/ Item) of the equipment / items supplied including supply of all accessories, and certified by the assigned officer, and subsequent inspection by Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, or his assigned representative. Any defect found in the materials / equipment / items supplied / work done will render the supplies / work open to rejection and decision of the Medical Superintendent, ESIC Hospital & ODC (EZ), Joka, shall be final and legally binding. The tenderers shall have to take the same (rejected store) back at their own cost and risk, and shall replace such rejections with the items of standard specifications / quality as acceptable to the Hospital Authority. Alternatively, the stores may be purchased from others / work may be executed through others, at the risks and costs of the tenderer, at the discretion of the authority. C. WARRANTY / GUARANTEE: Along with the Technical Bid the following information are to be provided exclusively. (i) All the equipments shall be carrying at least 2 (two) years warranty / guarantee against

defects of manufacturer/workmanship and poor quality of components. Accordingly, the tenderers shall indicate clearly and exhaustively the mandatory warranty / guarantee offered by them / by the manufacturing / supplying firms, its duration, as well as the various Terms & Conditions involved therein, at the time of submission of the Technical Bid papers.

(ii) The tenderer must be able to provide CMC for the equipments quoted at least for a period of five years beyond normal warranty period of 02 years [except item Sl.NO. 1 of department of

anaesthesiology where warranty is mentioned in the respective specification]. A declaration to such effect must be accompanied with the offer, in the technical bid.

(iii) Uptime guarantee: During the warranty/guarantee / CMC period the firm will maintain the

equipment in good working condition. All the complaints will be attended by the firm within 24 hours

ESI-PGIMSR, ESIC MEDICAL COLLEGE & EMPLOYEE’S STATE INSURANCE CORPORATION HOSPITAL & ODC(EZ)


An ISO 9001:2008 Certified Fax: 033 2467 2795, Phone: 033 2467 2799 / 6280 / 1764


of the dispatch of a complaint to their office. The firm shall ensure that machine is set right within 10 days (Ten Days) of the intimation. However, the tenderer have to arrange similar equipment as a standby at his cost and risk in case of breakdown. In case of the machine not being made functional within 10 days (Ten Days), Stiff Penalty equivalent to 2% of the cost of machine per week shall be levied for every week of delay at the discretion of the authority. In addition, the tenderer have to arrange similar equipment as a standby as stated above.

(iv) A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment has to be supplied.

D. Expected life of equipment certificate.

E. The Certificate that the quoted equipment have not been and are not being supplied to any other organization at a rate lower than being quoted here. F. A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment, if applicable. G. SOFT WARE UPGRADATION:

Free up-gradation of software (all update & upgrades) at least for 5 years is to be provided wherever applicable.

H. CERTIFICATES TO BE SUBMITTED ALONGWITH THE TECHNICAL BID: The following written guarantee / declaration must be provided exclusively without which the quotation shall be liable for rejection.

1. The name, addresses, phone no, fax no, etc, of the authorised service centre in and around Kolkata for each of the specific equipment / Article / item quoted.

2. A certificate about satisfactory performance of the equipment duly authenticated by other existing users of the equipment has to be supplied.

3. A declaration that the CMC (including all spares & labours) shall be made available at least for five years beyond normal warranty period of 02 years [except item Sl.NO. 1 of department of

anaesthesiology where warranty is mentioned in the respective specification] for each of the specific equipment / Article quoted.

4. A declaration indicating willingness to provide CMC services at least for five years after the expiry of the warranty period of 02 years [except item Sl.NO. 1 of department of anaesthesiology

where warranty is mentioned in the respective specification] for each of the specific equipment quoted. Accordingly, the tenderer must quote prices for CMC, separately, for each year, for 5 years. The quotation for the cost of such CMC are to be furnished along with cost of the equipment in the Price Bid. No such rate shall be mentioned in Technical Bid.

5. A declaration that the specific equipment/article with the given specifications has not been sold / supplied to any other organisation at a lesser price than the price quoted here for each of the specific equipment quoted here.

I. SAMPLES / DEMONSTRATION The firms should be prepared to demonstrate their item(s) / arrange for demonstration of items

within 3 (Three) weeks from the date of opening of tender for verification / inspection, etc., or at a later date as decided by the competent authority. The firm shall have to comply with such conditions failing which the tenderer shall be liable for rejection and forfeiture of the Earnest Money. The tenderer / firm / company shall arrange for demonstration of equipment / Item / article at his own cost and risk. Tenderer who fails to demonstrate the equipments/ instruments quoted will not be considered for selection. Wherever applicable / whenever asked, the firms shall have to submit samples of item(s) for verification /

inspection, approval, etc., if required and the firm shall have to comply with such conditions. It is,

therefore, in the own interest of the firm(s) concerned to get their proofs / samples, etc verified / inspected

before effecting supply at their own cost. Samples supplied should not be less than the quantity necessary


for the test given in the specifications (if any) or in the schedule to tender. Each sample should have a card

affixed to the sample which should bear the following information:

i. Your Name and address ii. Tender Number iii. Date of opening of tender iv. Item no. against which tendered v. Any other relevant description deemed fit.

Samples shall not be returned normally (until specifically asked for within one month of opening of tender in case of Implants, Equipments, Furniture and Instruments only, where the same shall be collected back from the hospital at the cost and risk of the Tenderers) and shall be the property of the ESIC.

J. DETAILS OF ITEMS QUOTED: It is mandatory to indicate the full name, make / brand, model number, and details specification of the equipments quoted by them, (in addition, a brochure of product information may be attached along with). Tenderers also have to indicate clearly the Name, Address and all Contact numbers of the MANUFACTURING FIRM and the firm responsible for providing CMC, of the equipment quoted by them.

K. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding 48 hours.

L. Onsite (in the hospital premises) Physical demonstration of the quoted model is preferable. However in difficulties demonstration is allowed only within the Kolkata city limit.

M. Cost of all accessories & consumables, not covered under CMC shall (per unit) also be quoted separately in the separate sheet II in price bid.

N. Free calibration certificate for the Medical Equipments for 07 years.

O. BUY BACK OFER {wherever specified in the Schedules / Specifications (Annexure –V)}:

Preference will be given to the bidder who offers for buy back of the condemned equipments. The rate for buy back offer of the condemned equipments is to be mentioned in the Price Bid. No such rate shall be mentioned in technical bid. The equipments which are offered for buy back may be inspected by the tenderers on any working day from 11 AM to 3PM.during the period of supply of blank tender form as mentioned in the tender notice(at the time of issue of Tender Documents). P.Tender selection will be made on the basis of rate quoted in Annexure- V by the technically suitable/qualified bidder.

Q.The payment to the contractor will be made mandatorily by electronic mode such as RTGS/NEFT etc. The contractor is instructed to supply the following information along with the tender.

(i) Name of the Bank (ii) Name of the branch (iii) Account Number (iv) IFSC Code (v) MICR Number

MEDICAL SUPERINTENDENT


Annexure - III TENDER APPLICATION FORM

1 Name of the firm:-

2

a Full Postal Address:-

a Cell Phone No.

b Telephone No:-

c Fax No.

E Email Id:

3 Name and Address of your Bankers stating the name in which the Account stands:-

a) Name of Bank

b) Name of Branch

c) A/c. No.

d) IFSC Code

e) MICR Number

4 Are you in the list of approved contractors of any other organisations / institutions, if any give details:-

5 Give details of any Government contracts executed during the last twelve months:-

6 Any other information which you consider necessary to furnish:

UNDERTAKING a) I, the undersigned certify that I have gone through the terms and condition mentioned in the tender

document and undertake to comply with them. b) The rates quoted by me are valid and binding upon me for the entire period of contract and it is certified

that the rates quoted and the lowest quoted for any other institution/hospital in India. c) The Earnest Money of Rs.___________ to be deposited by me has been enclosed herewith vide

Demand Draft No.________________ dated ______________ drawn on bank _____________________________ Branch _________________.

d) I/We give the rights to Medical Superintendent to forfeit the Earnest Money/Security money deposit by me/us if any delay occur on my/agent's part or fail to supply the articles within the appointed firms of desired quality.

e) There is no vigilance/CBI case or court case pending against the firm. f) I hereby undertake to supply the items as per directions given in the tender document/supply order

within stipulated period. g) Whether signing as - (please refer to point 02 of annexure -1) Date:- Signature of the Tenderer:- Place:- Full Name:-

Designation:- (Office seal of the tenderer)


(For Technical Bid Only)

The amount of Earnest Money / Bid Security to be deposited for each of the item quoted is mentioned against each serialised item below. The total amount of Earnest Money for all the quoted items may be drawn in a single demand draft. However, in such case, the detail break up of earnest money submitted for each item is to be furnished in a plain paper along with the bank draft.

ANNEXURE – IV

SL. NO.

NAME OF EQUIPMENT & INSTRUMENT

SPECFICATION Make/Model No. (to be filled in by tenderers)

Company /Manufacturer (to be filled in by tenderers)

REQUIREMENTS /QTY(FOR ESI-PGIMSR, JOKA)

EMD VALUE

QUOTED

(YES/NO)

DEPARTMENT OF ANESTHESIOLOGY ESIC-PGIMSR & MC & ESICH & ODC (EZ) JOKA 1 Anesthesia

Workstation (with

multiparameter patient

monitor)

1.Three gas (O2, N2O, Air) Anesthesia Gas Delivery Unit with the the following sub specifications:

a) The unit should have primary connection for central medical gas supply for O2, N2O and Air.

b) Provision for back up emergency supply through pin indexed O2 and N2O small cylinders.

c) Electronically controlled gas mixing and delivery system.

d) In case of O2 failure, the machine should automatically switch over to Air.

e) Audio visual alarm for O2 failure.

03 pcs 90000.00


f) Accurate control of minimum 25% O2 in fresh gas (through sensitive oxygen ratio controller) up to flow of > 1 L/min, in presence of N2O. At least 250 mL/min of O2 for low flow and minimal flow applications (fresh gas flow < 1 L/min).

g) Should be capable of accurate fresh gas delivery of up to 500 mL/min for minimal flow applications.

h) Ergonomically located integrated emergency O2 flush with self returning valve.

i) Should have single user-interface of at least 30 cm color display and electronic fresh gas doing for adult, child and neonate modes. The same user-interface should control and display all parameters including control of ventilator modes, display of pipeline and cylinder pressures, FiO2, ETCO2, airway pressures, tidal volume, minute ventilation, fresh gas flow, etc.

j) The user-interface should have configurable screen layouts for individual screen setups.

k) The machine should have fully automatic menu driven self test and user check list. In case of emergency


machine startup, it should be possible to bypass the self test completely.

l) The system leak test should be done through the Y-piece of the circle system and should not require user interaction during the test.

m) O2 safety flow adjustable from 0 – 12 L/min, through the vaporizer for emergency back up use.

n) Machine should also have an independent fresh gas outlet for connection to external circuit (Bain's circuit and Magill's circuit).

o) The machine should have a configurable nitrous-oxide-free operation (in case of necessity).

p) Fresh gas flow setting 50 mL/min to 12 L/min.

q) It should have the indicator to show the efficiency of fresh gas setting while used in low flow and minimal flow.

r) In the event of complete loss of external electric power and internal battery failure, it should be possible to manually ventilate the patient at 100% O2 and deliver anesthetic agent.

s) Major and critical components to be


made of corrosion proof and durable metal alloy.

2.Integrated Anaesthesia Ventilator:

a) Electronically controlled, electrically driven ventilator should not require any driving gas or pneumatic power for its operation.

b) Ventilator should be suitable to ventilate adult, child and neonate without changing ventilator bellows.

c) Ventilator should have fully automatic calculations and preset of patient specific ventilation settings based on ideal body weight of the patient.

d) Automatic breathing circuit compliance correction. Bellow should be enough light weight as not to offer any constant PEEP.

e) Modes of ventilation: Spontaneous ventilation, Manual ventilation, IPPV with plateau adjustment from 0 – 60 % of inspiratory time, PLV (pressure limited ventilation) with decelerating flow, Pressure controlled ventilation, SIMV-VCV, SIMV-PCV, Pressure Support (PS), PS with CPAP, PS with SIMV


(CMV/PCV).

f) Should be upgradeable to Volume assured mode - autoflow – delivering set tidal volume at minimum airway pressure.

g) Peak inspiratory flow up to 150 LPM.

h) Tidal volume adjustments from 20 mL to 1400 mL (upgradeable to minimum 5 mL).

i) PEEP from 0 – 20 mbar, electronically adjustable.

j) Respiratory frequency 3 – 100 /min.

k) I:E ratio: 5:1 to I:99

l) Should have the capability to ventilate with atmospheric O2, in case of O2 and power failure.

3.Circle breathing system, Circle absorber:

a) Compact circle breathing system suitable for standard, low flow and minimal flow with minimum patient circuit volume including circle absorber (approx. 3 L, excluding reservoir bag) for fast response to change in fresh gas compensation.

b) Fresh gas decoupled /


compensated breathing system for adult and children.

c) Integrated warmer in circle absorber for breathing gas conditioning and prevention of water condensation inside the circle system.

d) Breathing gas inlet and outlet of the circle system should be fitted with reusable (autoclavable) bacterial-viral filter.

e) Should have facility of gas sampling from the breathing system.

f) Manual APL on circle system valve with direct setting of release pressure.

g) Easy to fit and change circle absorber canister of about 1.5 L capacity.

4. Vaporizers: a) Temperature and pressure

compensated and flow interdependent vaporizer for Sevoflurane (1 such) and Isoflurane (1 such).

b) Vaporizer should have extended delivery range from 0 – 6%.


c) Vaporizers must have selective interlocking safety mechanism to prevent simultaneous operation of two vaporizers.

d) Should have transport lock and provide hermetic sealing of agent chamber during transport and storage.

e) The vaporizer should require no calibration in its life cycle.

5. Safety features and alarms: a) The machine should have

adjustable alarm limits for all the parameters with auto set alarm function.

b) The machine should have automatic display of MAC/MACx values and automatic activation of low agent alarm

c) Airway pressure low limit should automatically change with PEEP setting changes.

d) Continuous monitoring and display of tidal volume, airway pressure, ETCO2, FiO2 (paramagnetic O2 sensor), anesthetic agent concentration (with automatic identification of anesthetic agent),


lung compliance (VCV modes).

e) Graphic display of curves and loops with fast analysis of change in lung mechanics provided by simultaneous display of reference and real time loops.

f) Bar graph display of tidal volume (inspiratory and expiratory volume).

g) Trending for alarms and measured values with graphic trend display.

h) The machine should calculate agent compensation and agent uptake by patient on a case to case basis and display total fresh gas consumption in the electronic logbook of the machine.

6. Accessories to be provided: a) Should have at least 3 pc of RS232

connectivity port to communicate with patient monitor or HIS for automatic data transfer.

b) Pin indexed yokes for O2 and N2O (one each)

c) The machine should have externally-fitted water and moisture trapping chamber (large capacity) fitted to the medical air pipeline


inlet.

d) Trolley with drawer.

e) Floor mounting with durable caster wheels with brake.

f) Writing surface.

g) Color coded and DISS coded pipeline connections and hoses for O2, N2O and Air.

h) Adult and Child breathing circuits (autoclavable).

i) Anesthetic face masks (silicone, latex free).

j) Water traps and sampling lines for gas analyzer.

k) Semi closed breathing system for adult and child (latex free).

l) Cylinder key (2 such) chained to the machine, near the cylinder yokes.

m) User manual.

7.Quality standard of the equipment, warranty and after sales service:

a) All the components of the of workstation (anesthesia gas delivery unit, vaporizer, ventilator, circle absorber and circle system), should be


manufactured by the same agency to maintain uniformity of parts and efficient after sales service.

b) Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.

c) Physical demonstration of the quoted model is mandatory.

d) Must have CE certification (EN 60601-2-13) w.r.t the essential requirement for safety and performance of the anesthesia workstation.

e) The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.

f) Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.

g) Facility for good after sale & service with trained engineers posted in


Kolkata.

Multi-parameter patient monitor (integrated with the anesthesia workstation) with the following technical specifications are required.

1.Parameters: a) Should be suitable for monitoring

adult, child and neonatal patients under anesthesia.

b) Should have minimum of ECG, SpO2, NIBP, 2 IBP, 2 Temperature as inbuilt standard parameters. All other parameters should be by upgrades as pods or modules and software.

c) ECG: Five lead ECG monitoring with simultaneous display of three leads of ECG wave forms. Simultaneous display of twelve lead ECG waveform should be possible.

d) Respiration: Through impedance pneumography from ECG.

e) SpO2: Should have digital display, plethysmography, and tone modulation with change of

f) SpO2. Should be supplied with Masimo SET technology with compatible sensors for Adult, Child


and Neonate.

g) NIBP: Oscillometric method of NIBP measurement with stepwise deflation. Adult, child, neonate preset modes. Compatible NIBP cuffs for Large adult, Adult, Child and Neonate. Should display systolic, diastolic, mean pressure in large, easy to read display. Measurement modes: automatic, manual and stat. Automatic mode adjustable intervals from 2 minute – 240 minutes and adjustable alarms.

h) IBP: Simultaneous monitoring of 2 IBP. Range – 50 to 400 mmHg.

i) Temperature: Simultaneous monitoring of two temperature: core and skin temperature.

j) Simultaneous monitoring of two IBP and one temperature should be possible.

a)User Interface:

a) Should be suitable for adult, child and neonatal monitoring.

b) Should have non-volatile memory for graphic and tabular trending of all monitored parameters as


standard.

c) Should have event recall for minimum of 50 events, graphical and tabular trends, drug dose calculations, alarm logs, OxyCRG, oxygenation-ventilation and hemodynamic calculations as standard.

d) Should have arrhythmia detection including life threatening arrhythmias such as ventricular tachycardia, ventricular fibrillation, asystole, as standard feature.

e) Should have manual and automatic setting of screen format.

f) Should have user selectable parameter priority and color selection for parameter on screen.

g) Should have excellent cable management with as minimum as possible cables at monitor and patient end for maximum user friendliness.

h) Should have facility for both wired and wireless networking.

i) Should have minimum eight channels of waveforms with


minimum 8 inch display.

j) Cursor tool for vertical and horizontal cursors.

k) Should have web browsing facility to review each networked monitor through hospital LAN via PC in hospital LAN from remote location should be possible as future upgrade.

b)Optional upgrades/ modules (to be

quoted separately):

a) Neuromuscular monitoring module for monitoring neuromuscular blockade.

b) Bispectral index module for monitoring depth of anesthesia.

c)Safety features:

a) Internal battery backup for minimum of 3 hours (Li-ion battery) to be provided.

b) CE and US FDA certification for the monitor as well as the individual parameter modules w.r.t the essential requirement for safety and performance of the monitor and accessories.

c) Should have defibrillator and ESU


protection, ECG Synchronization, IABP interface (ECG and Arterial for triggering and deflation with a device delay of < 20 milliseconds.

d)Accessories:

a) 5/12 lead ECG cable.

b) SpO2 Masimo set finger sensor with extension cable for adult, child and neonate.

c) Temperature probes (2 pc).

d) NIBP Hose.

e) NIBP cuffs (large adult, adult, child, neonate).

f) IBP reusable cable for 2 IBP and 10 pc disposable transducers.

g) BIS module and DSC cable..

h) NMT module and cable with acceleromyograph..

i) User manual.

e)Warranty and after-sales service:

a) All the components of multi-parameter patient monitor should be manufactured by the same agency to maintain uniformity of parts and


efficient after sales service.

b) Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.

c) Physical demonstration of the quoted model is mandatory.

d) The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.

e) Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.

f) Facility for good after sale & service with trained engineers posted in Kolkata.

2 Multi functional Surgical OT table ( C-arm fluoroscope

Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control with the following specifications :

Should be a mobile universal operating

03 pcs 100000.00


compatible ) with electronic control

table with Direct motor driven adjustment of height, lateral tilt, Trendelenburg/anti-Trendelenburg.

It should be 100% oil free. Should have a longitudinal adjustment of

250 mm. Should have pneumatic spring support for

leg section and back section. Adjustment of the column functions should

be electrically Motorised via cable remote control

Should have additional operating panel with status indicators for tabletop orientation on column.

Should have built-in electronic interface to allow remote diagnosis and software updates via modem.

Should have maintenance-free battery, integrated in the column, which can be charged via a separate charging cable that also serves for direct mains operations if needed.

Basic tabletop should consists of seat section and back section that can be adapted and extended to meet the requirements of all the surgical disciplines by combining it with other tabletop components.

The system should have Electrical and functional safety with Microprocessor and Sensor Technology Module.

Completely X-ray translucent tabletop. Pads should be integrally foamed,

electrically conductive, soft and detachable, Velcro-free system for optimum hygiene and durability.

Should have stable running gear with 4 large double castors with a minimum diameter of 150 mm for easy manoeuvring.

Should have foot switch for brake.


Should have H – shaped base providing a plenty of space for the surgical team's feet.

Tabletop frame, column cladding, side rails and running gear frame should be made from disinfectant-resistant, easy to clean stainless steel.

It should be operated manually without the remote.

Column drive Height adjustment (without pads) Trendelenburg/Anti-Trenelenburg Tilt Pneumatic spring-assisted leg section up/down Standard leg section up/down° Back section up/down Longitudinal slide Patient weight

Electro-mechanical motor 700 mm – 1.120 mm 30°/35º +-25° +20°/-90° +-90° +85°/-30° 250 mm More than 225 Kg

The systems should be quoted with following General accessories :

1. Arm positioning support with radiolucent upper arm pad and roll- 2 nos.

2. Shoulder support-1 pair. 3. Anaesthesia Screen-1 nos. 4. Suspended arm strap set-2 nos 5. Infusion pole with 4 hooks-1 nos. 6. Body strap with locking Clamps-2 nos. 7. Lateral support height adjustable-2 nos. 8. Clamps-4 no. 9. Semi-circular pad-1 nos.

The systems should be quoted with following Orthopaedic accessories :

1. Knee Arthroscopy adapter 2. Radial clamp


3. Leg holder 4. Side rail extension & adapter

5. The table should be USFDA, & CE and UL certified

6. It should be meeting international standards for medical and electrical safety standards;

3 Cardiac

Biomarker

Analyzer (Card-

based

Quantitative

Assay):

Technical Specifications of Cardiac Biomarker Analyzer (Card-based Quantitative Assay):

a) The card-based portable Cardiac

Biomarker Analyzer should be able to

quantitatively measure the following

parameters: Troponin I, BNP, CK-MB,

Myoglobin, D-Dimer, using

Fluorescence Immunoassay

Technology.

b) The analyzer must be small in

dimension and portable system.

c) The analyzer must be easy to operate,

intuitive user interface, requiring

minimum technical training of the

operator.

d) The unit should operate on AC adapter

and also on inbuilt Li-ion battery

backup.

02 pcs 20000.00


e) The sample requirement must be less

than 300 micro liters for a given panel

of test.

f) The single-use test card should be self

contained with all the reagents, sensors

& calibrating solutions required for the

test.

g) The system should have inbuilt

memory capacity of at least 500 test

results with date and time.

h) Operating temperature range between

18 and 30 degree Celsius.

i) The system should be provided with an

in-built thermal printer.

j) The system should be able to interface

with HIS and LIS software.

k) Should have built in QC check facility

for the instrument.

l) Should be able to perform all the

quantitative tests of a single sample in

less than 20 minutes.

m) Should be US FDA certified and CE

marked for all the main equipment as

well as the accessories and kits used.


4 The

Endoscope Drying Cabinet

The Endoscope Drying Cabinet should have the following technical specifications:

1. Approximate dimensions: Width X Depth x Height = 1280 mm x 470 mm x 2150 mm.

2. Approximate depth of chamber = 370 mm; approximate volume of chamber 0.6 cubic meters.

3. Number of endoscope positions: at least 6 (six).

4. Drying time = 120 minutes or less. 5. Storage time = 160 hours or more. 6. Power supply: 230V x 0.9 A, 50 Hz,

AC. 7. Power consumption should be less

than 150 watts. 8. Air supply: compressed air

pressurized medical grade dry air, internal pressure 3 – 8 bar, dew point = - 43 degree C.

9. Internal ventilator 30 cubic meter/h (approximately).

10. Hepa filter (filter class minimum 7) with 0.3micrometer/9997 DOP; HEPA filter resistance = 200 Pa

11. Cabinet doors must be lockable, with user access control to prevent unauthorized access.

02 pcs 5000.00


5 ELECTRO SURGICAL

UNIT

TECHNICAL SPECIFICATION FOR ELECTRO SURGICAL UNIT

The Micro-processor based isolated Electro Surgical Unit should be compatible with Argon Coagulator system, designed for all kind of General Surgeries with both monopolarand bipolar modes. The following features are required 1. The unit should be entirely

microprocessor based. 2. Machine should have LED displays. 3. “Highest power efficiency rating” - have

to be within the range more than 97 %. 4. Real time tissue impedance monitoring

technology to deliver the selected power perfectly into a wide range of tissue types reducing thermal spread, RF interference and Neuro muscular stimulation and spark using feedback technology of sensing tissue types at a rate as high as 200 times in a second.

5. Return Electrode Contact Quality Monitoring (REM) system with Adaptive REM facility.

6. The Machine should work with disposable dual plate patient's return electrode with good quality of polyhesive adhesive get.

7. Patients' return electrode should be available in three sizes, for adults, paediatric and neonatals.

8. The patient return electrode should be all disposable type.

03 pcs 5000.00


9. The service provider of the unit should have their working office/workshop in Kolkata.

10. Facilitating two surgeons at a time using one machine in the same surgery.

11. Numerical Error alarming system should be inbuilt.

12. With a single button on the machine, previous power setting can be recalled.

13. Should be type CF Equipment (IEC 601 – 1 & IEC 601-2-2) defibrillator proof.

14. Unit should be US FDA and CE certified 15. Facilitating under water procedures 16. Unit should have “Spray” mode with

Highest Crest Factor (in the range of 7-9) - (*Crest Factor as an indicator of a waveform's ability to coagulate bleeders without cutting effect.)

17. There should be option of changing the crest factor from low to high value with a single button.

18. There should be sufficient Coag modes present for all applications ( Preferably 4 coag modes)

19. Must be compatible with smoke Evacuator system, Argon Plasma Coagulator system and CUSA

Input power source; Operating Range : 170-260 VAC Line Frequency : 50-60 Hz Minimum High Frequency Leakage Bipolar Less than 60 mA Monopolar Less than 150


mA OUTPUT CHARACTERISTICS Highest Powers should be in the below ranges

Precise – 70 Watts Standard – 70 Watts Macro – 70 Watts

Low – 300 Watts Pure – 300 Watts Blend – 200 Watts

Deisccate – 120 Flug. High Crest Factor – 120 Flug, Low Crest Factor-120 Spray - 120

OUTPUT WAVEFORMS :-

BIPOLAR: 470 Khz sinusoid

Monopolar Cutting Pure: 393 kHz sinusoid Blend: 393 kHz bursts of sinusoid recurring of 27 Khz intervals. 50% duty cycle envelope

Monopolar Coagulation: Dessication:- Low 1: 240 +-40 Khz sinusoid recurring at 39 Khz. 8% duty cycle Low 2: 393 kHz sinusoid Low 3: 393 kHz sinusoid Fulguration:- High 1: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 57 Khz


High 2: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 30 Khz Spray:- 390 Khz damped sinusoidal bursts with a randomised repetition centered at 28 kHz. Frequency include 21 Khz ‹ f ‹ 35 KHz Output Is further modulated by a random 250 Hz envelope with a variable duty cycle Output power changes by ‹ 15% or 5 Watts, which ever is greater, as the line voltage varies from 90 – 135 volts and 186 – 264 volts (into a 300 ohm load)

6 Forced air warmer

Specifications for Forced air warmer 1. Forced air warmer for patient

warming with adjustable automatic temperature control between 32 - 44 degree Celsius, in steps of 4 degree Celsius; with outlet hose temperature monitoring system. The warmer unit should have the system of securely mounting on any IV pole or bed rail. Non-tipping mounting pole, with caster wheels, and wire basket to be provided with each warmer unit.

03 pcs 4000.00


7 Forced-air

(convective)

patient-warming

system

Forced-air (convective) patient-warming system Technical Specifications:

a) Servo-controlled forced–air (convective) patient

warming system, using thermistors placed at hose end.

b) Hose end temperature range must be

adjustable from 36°C to 44°C by 4°C

increments (±1°C).

c) Relative Average Noise Level at 1000 Hz (front

and back) must be less than 45 dBA. d) Air Flow: 55 to 86 cubic feet/min.

e) Must have air filtration system with 0.2 micron

filters.

f) Operating voltage 230V, 50Hz AC.

g) The components and accessories of the convective patient warmer must conform to the

following Quality Standards: Product Safety (EN

60601-1, UL 2601-1); Convective Warming

Blanket Flammability (NFPA 702, 16 CFR

1610); EMC (EN 60601-1-2, FCC 47 CFR Part

15, Class B); Enclosure Protection (IEC 60529 IP Code: IPX1); Convective Warmers (ASTM

F2196-02); Drop Test Compliance (EN 60601-

1), and must have the US-FDA 510(k)

certification.

5 (five)

11000.00

8 Portable USG

equipment for vascular imaging

and regional

anesthesia

Portable USG equipment for vascular imaging and

regional anesthesia Technical Specifications:

a) Portable ultrasound machine with multi-frequency

broadband linear array, curved array and sector array

transducers used for accurate localization of peripheral

nerves, nerve plexuses, and epidural space during

regional anesthesia and also localization of peripheral and central veins and arteries for vascular access.

b) Must have US FDA 510(k) certification for the main

equipment and accessories.

c) Must have the following Internationally approved

safety features & components: Electromechanical safety standards: EN 60601-1:1997;

EN 60601-1-1:2001; EN 60601-2-37:2001 +

Amendment A1:2005; CAN/CSA C22.2, No. 601.1-

M90; CEI/IEC 61157:1992; UL 60601-1

1 (one)

32000.00


EMC Standards: EN 60601-1-2:2007; CISPR11:2004

DICOM standard: NEMA PS 3.15:2000-Part 15

9 Ambulatory PCA

pump

Ambulatory PCA pump Technical Specifications: a) Ambulatory microprocessor controlled

programmable patient controlled analgesia (PCA)

pump.

b) Must have the following CE approved safety

features & components: IEC/EN 60601-1, Class IIIb

(according to Directive 93/42 EEC; EMC: IEC/EN 60601-1-2/ 60601-2-24.

c) Must have US FDA 510(k) certification for the main


10 (ten)

26000.00

10 Syringe infusion

pump

Syringe infusion pump Technical Specifications:

a) Syringe infusion pump for continuous precise delivery of intravenous drug infusions.



(according to Directive 93/42 EEC; EMC: IEC/EN

60601-1-2/ 60601-2-24.

12 (twelve)

12000.00

11 Volumetric

(piston) infusion pump

Volumetric (piston) infusion pump Technical Specifications: a) Volumetric infusion pump (piston mechanism) for

continuous accurate fluid infusions, with ultrasonic,

adjustable air bubble sensor.

b) Must have inbuilt re-chargable Li-ion battery of at

least 1600 mA. c) Must have the following CE approved safety features

& components: ISO 9001:2000 AND ISO 13485:2003

(in accordance with the Medical Devices Directive

93/42/EEC; Design Standard: EN 60601-1 (safety)

and IEC 601-1-2 (EMC); Electrical Safety Stabdards:

EN 60601-1, IEC 60601-2-24, IEC 60601-1-4.

4 (Four)

12800.00

12 Single chamber

temporary cardiac

pacemaker (VVI,

VOO, AAI, and AOO

modes)

Single chamber temporary cardiac pacemaker (VVI,

VOO, AAI, and AOO modes) Technical Specifications:

a) Single chamber temporary cardiac pacemaker

with VVI, VOO, AAI, and AOO modes.

b) VVI (AAI) modes must be selectable with and without acoustic signal.

c) Pacing Rate: 30 to 180 ppm

2 (two)

3600.00


d) Atrial Overdrive Pacing (RAP): 2X (60 to 360

ppm); 4X (120 to 720 ppm)

e) Output Amplitude: 0.3 to 12 V ± 5%

f) Pulse Width: 0.75 ms ± 0.02 ms g) Sensitivity: 1 to 20 mV, Asynchronous.

h) Refractory period: 250 ms

i) Battery Type: Should accept Standard 9 V,

Alkaline or Lithium batteries. Should have

economically long battery lifetime of up to 30

days of operation with a single 9 V Alkaline battery.

j) Weight must be less than 200g (with battery)

k) Connector Compatibility: Must accept standard

connector pins with diameters ranging from 0.9

to 2.0 mm. Must accept all standard myocardial heart wires and temporary pacing leads for

direct connection or through temporary

extension cable.

l) Protective cover must be present to safeguard

against accidental changes to settings.

m) Audible warning tone for low battery, including low battery indicator must be present.

n) Pacing run-away protection feature must be

present.

o) Arm Strap must be supplied.

p) The equipment must conform to ISO and CE stands for safety of operation and quality.

13 Pressure Infuser

Bag (Reusable): 1

L & 0.5 L sizes

Pressure Infuser Bag (Reusable): 1 L & 0.5 L sizes Technical Specifications:

a) Heavy duty pressure cuff specially designed for

rapid infusion/pressurized infusion of fluids.

b) Suitable for pressure up to 400 mm of Hg. c) Transparent material to enhance the visibility of

the fluid transfer/flow.

d) Easy to use, hook-and-loop fastener enables

easy replacement of Infusion bag without

removal of Pressure Cuff from drip stand. e) Instant venting through the three way stop cock

enables quick deflation of the cuff.

f) Clear & precise pressure gauge facilitates rapid

& reliable pressure control.

g) Squeeze bulb is supple, faster & easier to

operate for fast inflation.

20 pc of 0.5

L size

10 pc of 1 L size

1600.00(

0.5 L

size), and

1040.00

(1 L size)


h) Must conform to BIS / CE safety standards.

14 Percutaneous

dilatation

tracheostomy kit

(incorporating the Seldinger

technique and

reusable

“Guidewire

Dilating Forceps”)

Percutaneous dilatation tracheostomy kit

(incorporating the Seldinger technique and reusable

“Guidewire Dilating Forceps”) Technical Specifications: a) Percutaneous dilatation tracheostomy kit


“Guidewire Dilating Forceps”) with 7.0 mm ID cuffed

tracheostomy tube.

b) Must have US-FDA and CE approved safety features

& components.

4 (Four)

2400.00

15 Multimodal ICU Ventilator

Multimodal ICU Ventilator Technical Specifications:

a) Electric piston / turbine driven multimodal ICU

ventilator (Spont-PS, AC-VCV, AC-PCV, SIMV-VCV,

SIMV-PSV, Adaptive-BiPAP, PEEP, invasive and non-

invasive ventilation modes for adult & pediatric patients.

b) Must conform to the following Standards & Safety

Requirements: ISO 10651-2, ISO 10651-3, ASTM

F1100-90, IEC 60601-1, IEC 60601-1-2, IEC 60601-2-

12, UL 94 HB or better.

2 (Two)

12000.00

16 Portable multi-

parameter patient monitor

Portable multi-parameter patient monitor Technical Specifications: a) Portable multi-parameter patient monitor with

SpO2, ECG, NIBP, and Temperature, with wireless

LAN, and 3 h battery backup each mounted on

adjustable wall bracket.

b) Two (2) sets of standard accessories for ECG, SpO2 (adult, pediatric, neonate), NIBP cuff & hose (adult,

pediatric, neonate), temperature probe,

c) Must have US-FDA and CE approved safety features

& components.

4 (Four)

19200.0

0

17 Patient-transfer

slide-board

Patient-transfer slide-board Technical Specifications: a) Patient-transfer slide-board for Operation Theater,

(approx. dimensions: 1500 mm x 550 mm, L x W) made

of lightweight & resilient radiolucent material of high

impact tolerance, good anti-static properties,

maintenance-free and easy to clean.

b) Must be CE approved.

4 (Four)

2240.00

18 Adult half body basic CPR (BLS)

Adult half body basic CPR (BLS) training Manikin Technical Specifications:

2 (Two)

960.00


training Manikin

a) Half-body CPR (BLS) Training Manikin with

conforming to AHA (American Heart Association) 2015

guideline for CPR and ECC.

b) Must be able to support the performance of opening the airway, artificial breathing and external cardiac

compression.

c) While performing artificial aspiration, observable

chest rise must be present.

d) External chest compression: feedback for correct

compression dept (5-6 cm), correct compression site with prompt correct buzzing sound.

e) Excessive compression, prompt alarming buzzing

sound must be present.

f) Operation frequency: >100/min, with “tick” sound

g) Power: battery

19 Adult advanced CPR (ACLS)

training Manikin

with monitor &

printer

Adult advanced CPR (ACLS) training Manikin with monitor & printer: Technical Specifications:

a) Must combine the standards of the 2015 ACC-AHA

& ECC guidelines, with up-gradability to future revised

guidelines.

b) Guide standards of implementation of standards: the American Heart Association (AHA), 2015

International cardiopulmonary resuscitation (CPR) &

Emergency Cardiovascular Care (ECC).

c) Anatomical features must be clear, feel real, unified

color, realistic shape, and aesthetic appearance. d) Must simulate vital signs: the initial state, analog

mydriasis, the carotid artery pulsation.

e) After successful treatment, the simulated human

pupil must return to normal.

f) Must have feature of judging consciousness,

emergency call, pulse check, check breathing, remove foreign bodies of five operations.

g) Artificial respiration and heart functions.

h) Airway open manuvers.

I) Modes of operations: CPR training, simulation,

assessment and actual assessment. j) CPR display functions:Electronically monitored

airway open and press parts. Artificial respiration and

external cardiac compressions and the correct number

and the number of errors.

220V power supply.

k) Recording & Printer Features: Choice of operating

1 (one)

4000.00


simultaneously print operation and choice of operation

after the resuscitation.

The printed transcript must cover covers the mode of

operation, the sense of judgment, rescue breathing, pulse check, check breathing, remove foreign bodies,

each cycle of operation the number of compressions

and blowing, pressing the right / wrong number, press

the wrong reasons and frequency, inflatable the right /

wrong reasons and frequency of blowing the wrong

reasons, set the time, operating time and the evaluation.

RF remote control functions:

l) RF remote control: The instructor can start by

remote control CPR, stop, pupillary changes, with or

without pulse, printers, and other functions. Can also sense of judgment, emergency call, pulse check, check

breathing, remove foreign bodies to be recorded.

m) The material characteristics: face skin, neck skin,

chest skin, hair from high quality, and durable

material and should not distort while decontamination

and disassembly.

20 Child advanced

CPR (ACLS)

training Manikin

with monitor &

printer:

Child advanced CPR (ACLS) training Manikin with monitor & printer: Technical Specifications:



guidelines. b) Guide standards of implementation of standards:

the American Heart Association (AHA), 2015








f) Must have feature of judging consciousness, emergency call, pulse check, check breathing, remove

foreign bodies of five operations.



1 (one)

4000.00



assessment and actual assessment.

j) CPR display functions:Electronically monitored

airway open and press parts. Artificial respiration and external cardiac compressions and the correct number


220V power supply.



after the resuscitation. The printed transcript must cover covers the mode of

operation, the sense of judgment, rescue breathing,

pulse check, check breathing, remove foreign bodies,


and blowing, pressing the right / wrong number, press the wrong reasons and frequency, inflatable the right /


reasons, set the time, operating time and the

evaluation.


l) RF remote control: The instructor can start by remote control CPR, stop, pupillary changes, with or

without pulse, printers, and other functions. Can also

sense of judgment, emergency call, pulse check, check


m) The material characteristics: face skin, neck skin, chest skin, hair from high quality, and durable


and disassembly.


SL. NO. NAME OF EQUIPMENT & INSTRUMENT




EMD VALUE

QUOTED

(YES/NO)

DEPARTMENT. OF OBST. & GYNAE. ESI-PGIMSR, JOKA 1 Cardiotocographi

c fetal monitor

with Maternal

Monitor

Specification of Cardiotocographic fetal monitor

with Maternal Monitor.

Standard size colour TFT screen monitor for display

of wave forms and digital

Automatic fetal movement detection facility in wave

forms.

Standard twin pregnancy monitoring system

Support for external thermal printer or ink jet printer

Built- in rechargeable battery and AC/DC power

supply.

Built-in network capability.

24 hours monitoring, data storage and reload

capacity.

Fetal heart acceleration and deceleration

measurement ability

03 pcs 15000.00


Fetal heart base line beat to beat variation and

acceleration, deceleration analysis capability.

Printing functions with paper for documentation.

Automatic monitoring mode and convenient operation

by manual/digital keys and rotary knob.

Light and auto-alarm ability complying with

international standard.

OPTIONAL (Additional Specification):

Maternal monitoring parameters may be present in

addition to fetal monitoring system.

ECG

SPO2

NIBP

Respiratory rate

Temperature

Other parameters

2 Delivery Bed Specifications

Delivery Bed:

Overall size: 1880L X 900w X600-800H mm.

Tubular Frame work mounted on 125 mm dia

castor two with breaks.

Three Section top made of MS pipe with fixed

cushioned mattress.

02 pcs 5000.00


Height Adjustment preferably Hydraulic

height adjustment & back section

adjustment through electric actuator

system.

Trendlenburg/ Reverse Trendlenburg

Positions through pneumatic pump.

Leg end section can slide under the main

section. Wheel lock system must be

present.

Provided with a pair of upholstery lithonomy

position.

SS telescopic IV Rod.

Detachable SS Tray. 3 MICROSCOPE MICROSCOPE SPECIFICATIONS

Optical System: UIS2 (Universal infinity-corrected) optical system

Illumination:

Built-in transmitted Koehler illuminator 6V/30W halogen bulb 100-120V/220-240V ~ 0.85/0.45A 50/60Hz

Focusing:

Stage height movement by roller guide (rack and pinion) Stroke per rotation: 36.8mm Full stroke range: 25mm Upper limit stopper Tension adjustment on coarse focus adjustment knob

Revolving Nosepiece: Fixed quadruple nosepiece with inward tilt

Observation Tube:

Type: U-CBI30-2, Binocular U-CTR30-2, Trinocular

Field Number: 20 20

02 pcs 30000.00


Tube inclination:

Interpupillary distance adjustment range:

30°

48mm-75mm

30°

48mm-75mm

Light path selector: None

None (Bi 50%, Video/Photo 50% fixed)

Stage:

Size: 188mm(W) x 134mm(D)

Movement range: 76mm X-direction x 50mm Y-direction

Specimen holder: Double slide holder

Rubber grip: Equipped as standard

Condenser:

Type: Abbe condenser

NA: 1.25 with oil immersion

Aperture in iris: Built-in

Dimensions & Weight:

233mm(W) x 432mm(H) x 367.5mm(D), approximately 8.5kg (approx. 18.7lbs.)

4 Portable

Ultrasound

Specifications of Portable Ultrasound Machine

01 pc 10000.00


Machine

1. The unit should be compact, light weight,

portable,sturdy and resistant to break & damage..

2. It should be suitable for vascular access (CVC

placement,PICC) Nerve blocks(Lower as well as

upper extremity),E-FAST examination, AAA

Exam, small parts, applications in adults and

paed. patients and also suitable for

echocardiography & interventions. Multiple

preloaded applications presets should be available

for the above.

3. The unit must have real time compound

imaging for improved contrast resolution &

eliminating ultrasound artifacts to achieve

optimum image quality.

4. The unit must have automatic gain adjustment

for B mode imaging

5. Scanning depth must be available up to 35 cm.

6. System should support transducer technologies

like convex, linear and phased array.

7. Imaging modes of real time 2D, color Doppler,

Pulsed wave Doppler, Continuous wave Doppler

and Power Doppler must be available in all

probes.

8. Simultaneous connectivity of at least 2 probes.

9. System must have fast start up to scanning in

less than 60 seconds as essential in critical and

emergency situation in ICU, emergency & OT.

10. Cine memory on all modes

11. DICOM ready system with facility to print


along with printer, store, ready to connect to

PACS

12. Flat LCD/TFT monitor of at least 10” with

flicker free image

13. Alphanumeric soft keys keyboard with easy

access scans controls, facility to sanitize the

system keyboard

14. to avoid cross contamination must be

available

15. Onboard storage of at least 10,000 images

,USB port for connectivity to computer

16. Should be able to operate both on AC and

battery. Battery pack should be self recharging

and should last at least for 2 hours when fully

charged.

17. Transducers to be provide as standard.

High frequency Linear transducer 6-12 MHz

with 60mm size for vascular access, small parts,

vascular, muscuskeltal

interscalene,Supraclavicular,Axillary,Musculocuta

neus,Popliteal,Saphenous.

Higher frequency will be preferred.

Convex transducer 2-5 MHz for deep nerve

access specially Celiac,Sciatic

nerve,Epidural,Subgluteal & abdominal

applications.

Broad band phased array transducer,1-5 MHz

for accessing the cardiac function & other related

application.


Needle guide must be supplied for Linear &

Convex probes along with 20 compatible needles

with the unit.

18. System should be supplied with trolley.

19. Valid US FDA/CE(European)/BIS

certification.

5 Digital Fetal

Doppler

Specifications for digital Fetal Doppler:

Fetal doppler CE approved, with blue

blacklight for dark sight

Easy operation for everyone, over 10 years

quality satisfaction

Tm-100B Fetal Doppler CE Approved

Ultrasound frequency : 2.5+-0.25Mhz

Ultrasound output power : 10mW/cmDC

Power supply:9.6V rechargeable battery

Working environment temperature : 10-40

01 pc 2000.00

6 COLPOSCOPE

TECHNICAL SPECIFICATIONS COLPOSCOPE

1. Should be a basic model with binocular tubes

with inter papillary adjustment and vertical stand.

2. Should have a working range with fine focus of

minimum 40mm.

3. Should have a 12.5x or 13.5x or 15x eye piece.

4. Should have a standard objective of working

distance between 250 to 300mm.

01 pc 2000.00


5. The vertical stand should have at least 4

wheels and at least 2 of them should have

breaking facility.

6. The vertical joint should be rotatable and

should have vertical height adjustment.

7. The head should be tiltable and should have

positioning handle.

8. Should use a halogen light source with coaxial

illumination.


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT OF EYE 1 C-mount , camera,

TV Attachment for video

C-mount 1 6000.00 Single Chip camera (Ex-stock) 1 Color TV (Ex-stock) 1

2 SLIT LAMP WITH MOTORIZED STAND

SLIT LAMP WITH MOTORIZED STAND Binocular Microscope Eye piece 10x16×25×40× Step magnification 8D compensation of ametropia Interpupilary adjustment : 50-80 mm Slit width: minimum 0-8 mm continuously adjustable Slit length: continuous from 8 mm to 1 mm minimum Slit angle : 0-180 degree continuous Slit Inclination: 5,10, 15,20 degree Filters: Blue, Red free , Grey & heat absorbing Bulb: Tungsten bulb Imaging facility

01pc

30000.00

3 VISUAL FIELD

RECORDING

INSTRUMENT

TECHNICAL SPECIFICATION FOR VISUAL FIELD RECORDING INSTRUMENT

( PERIMETER SYSTEM) Specification:

Stimulus intensity 0.03 -10,000 Asb Stimulus Duration 0.1 – 9.98 secs Stimulus Wavelength Broadband visible light Maximum Bowl illumination 31.5 ASB GPA Software

01 pc 10000.00


Testing features: Threshold Testing Library Central Field Testing Patterns: 30-2, 24-2, 10-2 Macula Peripheral Field Test Patterns: 60-4, Nasal Step Screening Test Library Central Field Patterns: C-40, C-64, C-76, C-80, C-Armaly Peripheral Field Test Patterns: P-60, DD-81, FF-120, FF-135, FF-246, FF-Armaly, Nasal Step Specialty Test Library Esterman monocular Esterman binocular Superior 36 Superior 64 Stimulous / background color White on white User defined test storage User features: Fixation Monitoring Heiji Krakau blind spot monitor Video eye monitor Trial lens Holder Remote video eye monitoring capability Operator interface Help Menu Touch screen on CRT Motorized chin rest Printer Printex Thermal printer, table mounted Patient data input Name, Birth Date, ID, Trial Lens, VA, Pupil size IOP, C/D ratio, Diagnosis Code, Procedure Code, Comments


4 Flash Autoclave 1. Size: Minimum 20 Litre 2. Reservoir: 3 to 5 Litre 3. Tray: Minimum 3 in number 4. Air removal: vacuum pump 5. Total sterilization with vacuum dry: shouldn’t

take more than 30 min. 6. Exposure temperature: 121⁰ C/ 134⁰ C 7. Fully automatic, microprocessor controlled 8. Attached printer 9. European ‘B’ class certified

01 pc 10000.00

5 PHACOEMULSIFI

ER Based on peristaltic pump technology.

o Crystal phaco hand piece. o Multimode phaco (Continuous /

pulse / burst). o Occlusion mode phaco. o Cool microincision phaco. o In phaco mode.

Vaccum level 0-500 mm Hg

Pump flow rate 0-50cc

o Continuous irrigation facility. o Bipolar diathermy with selectable

power. o High speed anterior segment

vitrectomy preferably with electric cutter.

o Foot switch control for irrigation, I/A, phaco.

01 pc 10000.00


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT OF ANATOMY

REQUIREMENT OF LIST OF BONES: Technical Specifications:

1 Full skeleton 10 sets

24000.00

2 Vertebral column 10 sets

20000.00

3 Vertebral column with pelvis 10 sets

20000.00

4 Articulated pelvis 10 sets

20000.00

5 Full Skeleton Loose bones 10 sets

24000.00

6 Full Skull with mandible attached 10 sets

30000.00

7 Full Skull without mandible 10 sets

30000.00

8 Cut section of skull 10 sets

26000.00


SL. NO.





EMD VALUE

QUOTED (YES/NO)

REQUIREMENT OF ITEMS AND INSTRUMENTS Specifications

9 Tanks(portable)-STEEL(Accommodate at least 3 complete human bodies)

6 pcs

14400.00

10 Student microscopes (Light) 50pcs

25000.00

11 Revolving stools(Steel) 250 pcs

11000.00

12 Dissection tables(full size) 15 pcs

18000.00

13 Dissection tables(small size) 6 pcs

4800.00

14 Student lockers 100 pcs

30000.00

15 Full model human male and female (detachable)- Vinyl model

1 set each

500.00


SL. NO.





EMD VALUE

QUOTED (YES/NO)

Laminated Histology Charts and models and viscerae and Slides- provided separately MODELS/CHARTS FOR MUSEUM: Specifications

16 Full skeleton 3 sets 720.00 for

Model & 78.00 for

Chart

17 Vertebral column 3 sets 720.00 for

Model & 78.00 for

Chart

18 Vertebral column with pelvis 3 sets 720.00 for

Model & 78.00 for

Chart

19 Articulated pelvis 3 sets 720.00 for

Model & 78.00 for

Chart

20 Full Skeleton Loose bones 3 sets 720.00 for

Model & 78.00 for


Chart

21 Cardiac muscle 1 set 240.00 each

Model & Rs. 26.00 For each

chart)

22 Skeletal muscle 1 set 240.00 each


chart)

23 Smooth muscle 1 set 240.00 each


chart)

24 Compact bone 1 set 240.00 each


chart)

25 Spongy bone 1 set 240.00 each


chart)

26 Spleen 1 set 240.00 each


chart)


27 Lymph node 1 set 240.00 each


chart)

28 Tonsil 1 set 240.00 each


chart)

29 Thymus 1 set 240.00 each


chart)

30 Trachea 1 set 240.00 each


chart)

31 Lung 1 set 240.00 each


chart)

32 Submandibular gland 1 set 240.00 each


chart)

33 Sublingual gland 1 set 240.00


each Model & Rs. 26.00 For each

chart) 34 Parotid gland 1 set 240.00


chart)

35 Tongue 1 set 240.00 each


chart)

36 Esophagus 1 set 240.00 each


chart)

37 Stomach(body) 1 set 240.00 each


chart)

38 Stomach (pylorus) 1 set 240.00 each


chart)

39 Liver 1 set 240.00 each



chart) 40 Pancreas 1 set 240.00


chart)

41 Duodenum 1 set 240.00 each


chart)

42 Jejunum 1 set 240.00 each


chart)

43 Ileum 1 set 240.00 each


chart)

44 Large intestine 1 set 240.00 each


chart)

45 Cecum with APPENDIX 1 set 240.00 each

Model &


Rs. 26.00 For each

chart) 46 Gall bladder 1 set 240.00


chart)

47 Kidney 1 set 240.00 each


chart)

48 Ureter 1 set 240.00 each


chart)

49 URINARY BLADDER with prostate 1 set 240.00 each


chart)

50 TESTIS with vas deferens 1 set 240.00 each


chart)

51 Ovary 1 set 240.00 each

Model & Rs. 26.00


For each chart)

52 UTERUS with uterine tube 1 set 240.00 each


chart)

53 Vagina 1 set 240.00 each


chart)

54 Thyroid 1 set 240.00 each


chart)

55 Suprarenal gland 1 set 240.00 each


chart)

56 Pituitary gland 1 set 240.00 each


chart)

57 Skin 1 set 240.00 each



chart) 58 Mammary gland 1 set 240.00


chart)

59 Spinal cord 1 set 240.00 each


chart)

60 Cerebrum 1 set 240.00 each


chart)

61 Cerebellum 1 set 240.00 each


chart)

62 Eye 1 set 240.00 each


chart)

63 Placenta 1 set 240.00 each


chart)


64 Umbilical cord 1 set 240.00 each


chart)

65 Ear 1 set 240.00 each


chart)

66 Tongue 1 set 240.00 each


chart)

67 Zona pellucida 1 set 240.00 each


chart)

68 Morula 1 set 240.00 each


chart)

69 Blastocyst 1 set 240.00 each


chart)

70 Sperm 1 set 240.00



chart) 71 Ovum-matured 1 set 240.00


chart)

72 Ovum-immatured 1 set 240.00 each


chart)

73 Placenta 1 set 240.00 each


chart)

74 Placental barrier 1 set 240.00 each


chart)

75 Turner syndrome 1 set 240.00 each


chart)

76 Kleinfelter syndrome 1 set 240.00 each



chart) 77 Fallot’s tetralogy 1 set 240.00


chart)

78 Velamentous placenta 1 set 240.00 each


chart)

79 Battledore placenta 1 set 240.00 each


chart)

80 Trilaminar germ disc 1 set 240.00 each


chart)

81 Bilaminar germ disc 1 set 240.00 each


chart)

82 Developing notochord 1 set 240.00 each

Model &


Rs. 26.00 For each

chart) 83 Neural tube defects 1 set 240.00


chart)

84 Physiological hernia 1 set 240.00 each


chart)

85 Developing foregut 1 set 240.00 each


chart)

86 Developing midgut 1 set 240.00 each


chart)

87 Developing hindgut 1 set 240.00 each


chart)

88 Devleoping heart 1 set 240.00 each

Model & Rs. 26.00


For each chart)

89 Descent of testis 1 set 240.00 each


chart)

90 Developing kidney 1 set 240.00 each


chart)

91 Anatomy of pouch of douglas 1 set 240.00 each


chart)

92 Developing male reproductive system 1 set 240.00 each


chart)

93 Developing female reproductive system 1 set 240.00 each


chart)

94 Developing brain 1 set 240.00 each



chart) 95 Developing tongue 1 set 240.00


chart)

96 Developing eye 1 set 240.00 each


chart)

97 Developing lens 1 set 240.00 each


chart)

98 Devloping inner ear 1 set 240.00 each


chart)

99 Developing pinna 1 set 240.00 each


chart)

100 Middle ear 1 set 240.00 each


chart)


101 Semicircular canals 1 set 240.00 each


chart)

102 Long bone of child showing blood supply 1 set 240.00 each


chart)

103 Long bone of adult showing blood supply and ossification

1 set 240.00 each


chart)

104 Developing pituitary 1 set 240.00 each


chart)

105 Developing suprarenal 1 set 240.00 each


chart)

106 Neural crest cells and derivatives 1 set 240.00 each


chart)

107 Karyotyping 1 set 240.00



chart) 108 Development of diaphragm 1 set 240.00


chart)

109 Development of liver 1 set 240.00 each


chart)

110 Development of spleen 1 set 240.00 each


chart)

111 Development of lungs 1 set 240.00 each


chart)

112 Bifurcaion of trachea 1 set 240.00 each


chart)

113 Larynx 1 set 240.00 each



chart) 114 Pharynx 1 set 240.00


chart)

115 Mandible 1 set 240.00 each


chart)

LIST OF VISCERAE TO BE PROVIDED FOR MUSEUM DISPLAY PURPOSE IN GLASS VESSELS (MOUNTED) THORAX (MUSEUM)

116 Right lung 2 pcs

3600.00

117 Left lung 2 pcs

3600.00

118 Heart 2 pcs

5600.00

119 Heart with pericardium 2 pcs

5600.00

120 Trachea with oesophagus 2 pcs

5600.00

121 Trachea 2 pcs

5600.00

122 Diaphragm 3 pcs

8400.00

ABDOMEN, PELVIS & PERINEUM (MUSEUM) 123 Liver 2 pcs

2400.00


124 Kidney –right and left 4 each

4800.00

125 Kidney (both) + urinary bladder 1pc

1200.00

126 Spleen 4 pcs

4800.00

127 Duodenum + pancreas + spleen 3 pcs

3600.00

128 Stomach 4 pcs

4800.00

129 Jejunum + ileum 3 pcs

3600.00

130 Caecum with appendix 3 pcs

3600.00

131 Rectum + anal canal 3 pcs

3600.00

132 Small intestine 3 pcs

3600.00

133 Large intestine 3 pcs

3600.00

134 Male composite viscera 2 pcs

2400.00

135 Female composite viscera 2 pcs

2400.00

136 Urinary bladder with prostate gland 2 pcs

2400.00

137 Urinary bladder 2 pcs

2400.00

138 Testis right and left 4each

4800.00

139 Perineum male 1 pc

1200.00

140 Perineum female 1pc

1200.00

BRAIN & SPINAL CORD(MUSEUM)

141 Spinal cord 4pcs 7200.00


142 Meninges 3 pcs

5400.00

143 Whole brain (both the hemispheres) 2pcs 3600.00

144 Cerebrum - half brain (one hemisphere) 2 each

3600.00

145 Cerebellum 3pcs

5400.00

146 Cerebellum + brain stem 3 pcs

5400.00

147 Brainstem 2 pcs

3600.00

148 Cerebrum with brain stem 2 pcs

3600.00

HEAD & NECK(MUSEUM) 149 Sagittal section

(showing pns, pharynx, larynx & nasal cavity) 3 each

3000.00

150 Eyeball 12 pcs

12000.00

151 Eyeball sagittal section 4 pcs

4000.00

152 Eyeball coronal section 4 pcs

4000.00

153 Lens 4 pcs

4000.00

154 Thyroid gland with isthmus 3 pcs

3000.00

155 Composite viscera (tongue + larynx+ pharynx) 4 sets 4000.00 LIMBS (MUSEUM) 156 Axilla with arm 2 pcs

3200.00

157 Cubital fossa 2 pcs

3200.00

158 Palm 2 pcs

3200.00


159 Wrist 2 pcs

3200.00

160 Complete upper limb 3 pcs

4800.00

161 Complete lower limb 3 pcs

4800.00

162 Ts forearm 2 pcs

3200.00

163 Ts arm 2pcs

3200.00

164 Femoral triangle with back of thigh 2 pcs

3200.00

165 Leg with foot 2 pcs

3200.00

166 Ts thigh 2 pcs

3200.00

167 Ts leg 2 pcs

3200.00

SLIDE SETS REQUIRED 168 Cardiac muscle 50 sets 300.00

169 Skeletal muscle 50 sets 300.00 170 Smooth muscle 50 sets 300.00

171 Ts- compact bone 50 sets 300.00 172 Ts-spongy bone 50 sets 300.00

173 Hyaline cartilage 50 sets 300.00 174 Elastic cartilage. 50 sets 300.00

175 Fibro cartilage 50 sets 300.00

176 Artery 50 sets 300.00 177 Vein 50 sets 300.00

178 Spleen 50 sets 300.00 179 Lymph node 50 sets 300.00

180 Tonsil 50 sets 300.00

181 Thymus 50 sets 300.00


182 Trachea 50 sets 300.00

183 Lung 50 sets 300.00 184 Submandibular gland 50 sets 300.00

185 Sublingual gland 50 sets 300.00 186 Parotid gland 50 sets 300.00

187 Tongue 50 sets 300.00

188 Esophagus 50 sets 300.00 189 Stomach(body) 50 sets 300.00

190 Stomach (fundus) 50 sets 300.00 191 Stomach (pylorus) 50 sets 300.00

192 Liver 50 sets 300.00

193 Pancreas 50 sets 300.00 194 Duodenum 50 sets 300.00

195 Jejunum 50 sets 300.00 196 Ileum 50 sets 300.00

197 Submandibular gland 50 sets 300.00 198 Appendix 50 sets 300.00

199 Gall bladder 50 sets 300.00

200 Kidney 50 sets 300.00 201 Ureter 50 sets 300.00

202 Urinary bladder 50 sets 300.00 203 Testis 50 sets 300.00

204 Vas deferens 50 sets 300.00

205 Prostate 50 sets 300.00 206 Ovary 50 sets 300.00

207 Uterine tube 50 sets 300.00 208 Uterus 50 sets 300.00

209 Vagina 50 sets 300.00 210 Thyroid 50 sets 300.00


211 Suprarenal gland 50 sets 300.00

212 Pituitary gland 50 sets 300.00 213 Skin ls (thick) 50 sets 300.00

214 Skin (thin) 50 sets 300.00 215 Mammary gland (active) 50 sets 300.00

216 Mammary gland (inactive) 50 sets 300.00

217 Spinal cord 50 sets 300.00 218 Cerebrum 50 sets 300.00

219 Cerebellum 50 sets 300.00 220 Retina 50 sets 300.00

221 Cornea 50 sets 300.00

222 Placenta 50 sets 300.00 223 Umbilical cord 50 sets 300.00

224 Tongue 50 sets 300.00


225 CADAVER

STORAGE TANKS (Full SS)

CADAVER STORAGE TANKS (Full SS) (Accommodate full human cadavers- at least 2 in each tank) Specification

1. OVER ALL SIZE: 72” (L) x 60” (W) x 24” (H)

WITH CASTER

2. FOUR SIDES ENCLOSED BY 1.6 MM SS SHEET 3. BOTTOM SHELVES MADE OF 1.6 MM SS SHEET

4. BOTTOM STRUCTURE MADE OF 40 X 40 X 6 MM ANGLE FRAME

5. LIDS MADE OF 1.2 MM SS SHEET (DOUBLE SHEET MOULDED) WITH ONE HAVING

HANDLE-6.

6. INSIDE ONE HAVING BOWL FOR DRAINAGE WATER. WHEN GET THE SOLUTION

7. RAISED INSIDE THE CABINET THEN CLOSED THE ADJUSTABLE KNOB. 8. MOUNTED ON 200 MM CASTER (HEAVY DUTY)

9. EVERY JOIN WITH ARGON WELDING.

10. FINISH WITH GLOSSY POLISH.

06 pcs 15000.00


SL. NO.





EMD VALUE

QUOTED

(YES/NO)

Department of Orthopedics 1 Prone position head rest (gel padded), dimensions: 280

x 240 X 140 mm adult size

01 pc

400.00

2 Universal patient positioner (gel padded) large, 380 X 140 X 80 mm for shoulder, lateral torso and under knees support adult size

02 pcs

480.00

3 Dome shape flat bottom gel positoner, large 510 x 150 X 125 mm (semicircular cushion positioner) for chest, pelvis and leg support in prone position, adult size.

02 pcs

400.00

4 High Definition Arthroscopy Set

Specification of High Definition Arthroscopy Set: True High Definition (HD 3 Chip) Camera System 1080p-1 No

720p, 1080i, 1080p Selectable Multiple digital outputs (HD & SD Outputs) Light source communication Electronic zoom (in p-modes only) Autoclavable Camera Head Shockflex prism mounting Resolution 1920X1080p, Light up card edge receptable Progressive scanning, Aspect ratio 16:9 2 Camera Head Buttons for 4 Remote Fuctions

300W Xenon Light Source- 1 No

Automatically adjust to optimal light intensity Auto Bulb saver function

01 set 70000.00


Stand by Mode Homogenized Light distribution Light Guide Locking Mechanism OLED Window

Fiber Optic Light Guide Cable 5mm, Autoclavable-1 No High Definition Monitor- 1 No

24 '' or More Fully High Definition Monitor Fully compatible with HD and Digital peripherals Sealed front panel in light-weight design with

VESA mount Wide-screen 16:9 aspect ratio PIP functionality Conntrast Ratio-1000:1 Resolution- 1920x1200

High Definition Arthroscope, 4mm, 30 deg, Autoclavable-1 No Arthroscope sheath- 1 No

5.9mm, Dual Stopcock system, Autoclavable, including Obturator

Shaver Console -1 No

Shaver Console 230 Volt Capacity to recognize the Hand piece, display of

speed The console should have option for connecting

Large Bone Drill & Saw Handpiece. Shaver Hand Piece-1 No

500- 12,000rpm, 500- 2,500 cpm, Single and Multi-turn Oscillate


Chuck for small drilling (for shoulder anchors etc) -1 No

Shaver Hand Piece should adapt the chuck Cutters

Full Radius resector, 4.2mm, 13 cm-6 Nos Bendable Cutter-6 Nos Bender for bendable cutter-1 No

Wireless Foot control-1 No

3 pedal foot control Hand Instruments

Wide bite Straight punch-1 No Alligator Grasper-1 No Hook Probe-1 No 90 deg rotary puch,right 90 deg rotary punch,left

Arthroscopic Pump System-1 No

Easy to setup and use. Flow not less than 2 lt / min. Pressure ranging 30 - 150 mmHg Weight should not more than 7 lbs System should be supplied with auclavable remote

control Inflow / out flow tubing set-10 Nos Arthroscopy Trolley(Indian)-1 No

The System should be CE/US FDA Approved.


5 C-ARM

MACHINE (IMMAGE INTENSIFIER)

SPECIFICATION OF C-ARM MACHINE (IMMAGE INTENSIFIER) (C-ARM FULLY MICROPROCESSOR BASED SYSTEM WITH FEATHER TOUCH PANAL) IMAGE INTENSIFIER:

6 & 9 with high imaging System with high performance capability

CONTROL PANNEL & GENERATOR:

All operation on control panel k-board. Microprocessor based control with feather touch

panel. Generator unisearch IMD unit. Excellent fluoroscopy. Radiography output 25mA. On requirement Fluoroscopy: foot switch & on the control panel. Kvp variation of 40 -110kvp. 3 step mode selection, normal (LIH), PULSE and

LIVE control. Digital kvp metering display. Digital ma metering display. Foot switch.

X-RAY TUBE HEAD (User Friendly Design):

Duel focus having 0.6mmand 1.8mm focus. Anode heat storage capacity 30kj. Anode cooling rate250 w/hr. Type of Generator – khz hf X-Ray Tube - Fluro 0.6mm X 0.6mm Focal Spot - 1.5mm X 1.5mm Fluro / Radio KVP - 40-110kvp Fluro mA - 0-4 mA Fluro Timer - 5 Minute

01 set 18000.00


MAS - Up to 200 Power Requirement - 220V/50-60 hz & 3.5 kw Image Intensifier - 9 Inch

C-ARM FEATURE Rotation 360Degree Source to II Distance 90Cms Arc orbital Movements 110Degree Pann movements 0-25Degree Horizontal Travel 22 cms Vertical motorized movement 32cms Detachable Cassette Holder (Option) 10” x

12”&8” x 10” TV MONITORS

15” / 17” Colour (Option) 625 Lines 50-60 hz High resolution display capability monitor.

MEMORY OPTION 26 frame memory Computer compatible (Option) 100 frame memory (Option)

6 Orthopaedic

Electric Drill System

Orthopaedic Electric Drill System:

04 pcs (against condemnationof Battery operated drill)

10000.00

Driving Unit includes Motor, Stand, foot Control, Flexible Shaft-1Pc, Tool Kit, Oil Bottle & special container

Cannulated Drill Hand piece max. speed 1200 RPM & with Fixed S.S.Chuck (0-1/4”)

Reaming Handpiece with Max. Speed 400 R.P.M. Cannulated & AO type quick coupling.

Drill Chuck Adaptor with Jacob’s Stainless Steel


Chuck (USA) Pistol Grip Sagital Saw (Set of five blades) Flexible Reamers (2 pieces with reaming pieces

6mm – 13mm) 7 DIGITAL

ELECTRONIC TOURNIQUET

SPECIFICATION OF DIGITAL ELECTRONIC TOURNIQUET:

Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of set point. Online Setting: Increase and decrease in pressure

settings Timer: Timer range from 9hours to 59minutes. Internal least count: Timer 1minute/Internal

1/1000 second. Alarm & Display Indication:-

When set pressure is over When pressure goes 25mmHg above set

pressure. When pressure goes 25mmHg below set

pressure. In battery mode, when battery voltage

reaches 9V. Memory: Pressure set in earlier session is stored

and displayed, when machine is switched on again.

Pressure Table: Maintains set pressure under leak condition.

Backup: 3hours battery backup. (on full charge) Switch over: Automatic switch over from offline

to online (vise versa). Power: 230V(AC)/50Hz ± 10% (Voltage

fluctuations from 180-270).

04 pcs 2500.00


Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—washable &

easy fitting (Paediatric, small, medium, big & large).

Digital Display: Digital Display of time elapsed, set time, actual and set pressure.

8 SMALL

FRAGEMENT INSTRUMENT SET

SMALL FRAGEMENT INSTRUMENT SET Content List:--

i) Drill Bit Q.C.End 2.5mm Dia—115mm

Length—2Pcs.,

ii) Drill Bit Q.C.End 3.2mm Dia—130mm

Length—2Pcs.,

iii) Counter Sink—6mm Head—1Pc.,

iv) Quick Coupling Handle—T-Type—1Pc.,

v) Tap with T-Handle for 3.5mm Cortical Screw—

2Pcs.,

vi) Tap with T-Handle for 4.0mm Cancellous

Screw—2Pcs.,

vii) Drill & Tap Sleeve combined 2.5/3.5mm—1Pc.,

viii) Insert Drill Sleeve 2.5mm—1Pc.,

ix) Screw Driver Shaft Q.C.End ---2.5mm Tip—

1Pc.,

x) Hexagonal Screw Driver 2.5mm tip—1Pc.,

xi) Small Depth Gauge—1Pc., Sharp Hook—1Pc.,

xii) Small Neutral & Loaded Drill Guide—1Pc.,

03 sets 1200.00


xiii) Spanner—11mm—1Pc.,

xiv) Small Plate Bender—pair—1Pair.,

xv) Plier Cum Wire Bender—1Pc.,

xvi) K-Wire Bender—1Pc.,

xvii) Reduction Forceps—Serartted---Ratchet

Lock—140mm—1Pc.,

xviii) Reduction Forceps—Pointed---Ratchet


xix) Self Centering Bone Holding Forceps—

190mm—1Pc.,

xx) Hohmann Retractor 8mm wide, short narrow

point, 160mm Length. 2Pcs.,

xxi) Hohmann Retractor 15mm wide, 160mm

Length—2Pcs..,

xxii) Periosteal Elevator ---Straight—160mm

length —8mm—1Pc.,

xxiii) Instrument Box with two trays length 300mm—1Pc.

9 LARGE FRAGEMENT INSTRUMENT SET

LARGE FRAGEMENT INSTRUMENT SET Content List:--

i) Drill Bit Q.C.End 3.2mm Dia—130mm

Length—3 Pcs.,

ii) Drill Bit Q.C.End 4.5mm Dia—130mm

Length—1Pc.,

iii) Counter Sink—8mm Head—1Pc.,

03 sets 1500.00


iv) Quick Coupling Handle—T-Type—1Pc.,

v) Tap with T-Handle for 4.5mm Cortical Screw—

2Pcs.,

vi) Tap with T-Handle for 6.5mm Cancellous

Screw—1Pc.,

vii) Insert Drill Sleeve 3.2mm—1Pc.,

viii) Drill & Tap Sleeve combined 3.2/4.5mm —

1Pc.,

ix) Drill & Tap Sleeve combined 3.2/6.5mm—1Pc.,

x) Screw Driver Shaft Q.C.End ---3.5mm Tip—

1Pc.,

xi) Large Hexagonal Screw Driver 3.5mm tip—

1Pc.,

xii) Large Depth Gauge—1Pc.,

xiii) Sharp Hook—1Pc.,Spanner—11mm—1Pc.,

xiv) Large Neutral & Loaded Drill Guide—1Pc.,

xv) Pointed Drill Guide with 4.5mm Tap Sleeve &

3.2mm Drill Sleeve—1Pc.,

xvi) Large Plate Bender—pair—1Pair.,

xvii) Instrument Box with two trays length

300mm—1Pc.


10 BASIC

INSTRUMENT SET

BASIC INSTRUMENT SET Content List:--

i) Universal Open Hand Drill –2Pcs.,

ii) Wire Tightner Cum Wire Twister—1Pc.,

iii) Guide Wire Introducer with Four Pegs—1

Pc.,

iv) Plier Cum Wire Bender Cum Wire Cutter –9”

–1Pc.,

v) Wire Cutter Double Action Length 250mmm-

1Pc.,

vi) Self Centering Bone Holding Forceps

150mm—1 Pair,

vii) Self Centering Bone Holding Forceps

240mm—1 Pair,

viii) Self Centering Bone Holding Forceps

280mm—1 Pair,

ix) Reduction Forceps –Serrated—Speed Lock—

170mm—2 Pair,

x) Reduction Forceps –Serrated—Speed Lock—

200mm—2 Pair,

xi) Reduction Forceps –Serrated—Speed Lock—

240mm—2 Pair,

xii) Pattela Bone Holding Forceps –Four

Prongs—1 Pc.,

03 sets 1500.00


xiii) Lane Bone Holding Forcep with Ratchet

200mm—2 Pc.,

xiv) Lane Bone Holding Forcep with Ratchet

170mm—2 Pc.,

xv) Lane Bone Holding Forcep with Ratchet

200mm—2 Pc.,

xvi) Bone Cutting Forceps (Straight) Double

Action—190mm –1 Pc.,

xvii) Bone Cutting Forceps (Straight) Double


xviii) Bone Cutting Forceps (Curved) Double

Action—190mm –2 Pcs.,

xix) Bone Cutting Forceps (Curved) Double


xx) Chisel with Fibre Handles 5,10,20,30mm --

- 1 Pc. Each.

xxi) Osteotome with Fibre Handle Straight

5.10.14.16.20mm—1 Pc. Each.

xxii) Osteotome with Fibre Handle Curved

5.10.14.16.20mm—1 Pc. Each

xxiii) Bone Currette Double ended 4mmx6mm –

2Pcs.

xxiv) Bone Currette Double ended 6mmx9mm –

2Pcs.

xxv) Langenback Retractor---Small—1Pc.


xxvi) Langenback Retractor---Large—1Pc.

xxvii) Bristow Retractor---1Pc.

xxviii) Self Retaining Retractor—Small—2 pcs.

xxix) Self Retaining Retractor—Medium—2 pcs.

xxx) Self Retaining Retractor—Large—1 pc.

xxxi) Periosteal Elevator Curved—6,10,14,20---

1 Pc. Each

xxxii) Bone Hammer 200,350,500gms--- 1 pc. Each

11 Large External Fixator

Large External Fixator Rod of dia 11 mm in

– Carbon fibre – lengths 100 – 400 mm – carbon fibre rod, curved for pelvis

Clamp, clip-on self-holding, MR-safe Aperture for rods 11 mm Schanz screw 5mm with lengths 125 – 200 mm All instruments must be enclosed in a Vario with

lid with an insert for Schanz Screws The instruments should have Combination

Wrench of diameter 11.0mm The instruments should have Socket Wrench of

diameter 11.0mm,cannulated The instruments should have Combination

Clamp, clip-on, self-holding, MR-safe The instruments should have Clamp, clip-on,

self-holding, MR-safe The instruments should have Universal Chuck

with T-Handle The instruments should have Adapter for

Seldrill™ Schanz Screw with diameter 5.0 mm The instruments should have Compressor, open

03 sets 1200.00


The instruments should have Short Trocar with diameter 3.5 mm

The instruments should have Long Trocar with diameter 3.5 mm

The instruments should have Handle for Drill Sleeve

The instruments should have Short Drill Sleeve 5.0/3.5

The instruments should have Long Drill Sleeve 5.0/3.5

The instruments should have Short Threaded Drill Sleeve 6.0/5.0

The instruments should have Long Threaded Drill Sleeve 6.0/5.0

The instruments should have Connecting Rod 5.0 mm, length 150 mm, Stainless Steel

12 Medium

External Fixator

Medium External Fixator Rod of dia 8 mm in

o Carbon fibre o lengths 120 – 320 mm

Clamp, clip-on self-holding, MR-safe Aperture for rods 8 mm Schanz screw 4mm & 5 mm with lengths 80 –

175 mm All instruments must be enclosed in a Vario with


Wrench with diameter 8.0 mm The instruments should have Wrench, hexagonal

with diameter 3.5 mm with T-Handle The instruments should have Combination

Clamp, medium, clip-on, self-holding, MR-safe The instruments should have Clamp, medium,

clip-on, self-holding, MR-safe The instruments should have Drill Sleeve 4.0/2.5

03 sets 1200.00


The instruments should have Adapter for Seldrill™ Schanz Screw diameter 4.0 mm


The instruments should have Universal Chuck, small, with T-Handle



The instruments should have Trocar with diameter 2.5 mm





The instruments should have Threaded Drill Sleeve 4.0


13 Portable X-

Ray Machine

Portable X-Ray Machine Specification;--- MICROPROCESSOR BASED DIAGNOSTIC 50 mA X-RAY MACHINE with following features

X-RAY TUBE UNIT –Oil filled stationary anode X-ray tube unit with focal spot 2.2 mm x 2.2 mm

RADIOGRAPHIC OUTPUT – mA Max mAs KV 50 250 45-55 40 200 60-75

01 pc 5000.00


30 150 80-85 KV SELECTOR – Select KV from 45 to 85 KV in

5 steps each SUPPLY VOLTAGE COMPENSATOR – Adjust

supply voltage from 180 v to 250 v automatically

LIGHT BEAM DIAPHRAGM Electronic DISPLAY – Digital display of mA ,

KVp & mAs OVERLOAD PROTECTOR IN BUILT mAs SELECTOR up to 250 mAs

Portable Stand ( can be dismantle Into smaller Parts)


SL. NO.





EMD VALUE

QUOTED

(YES/NO)

PHYSIOTHERAPY DEPARTMENT

1 T.E.N.S Therapy unit

T.E.N.S Therapy unit >with 4 channel. >Micro computer based model >Digital display >Separate display for each channel intensity &Timer. >Pulse for TENS International standard:1-200 Hz/sec >Pulse width International standard:50-200micro sec. >Output current 1 - 60 ma for each channel. >Should have preprogrammed indication menu >Must have real time current sensing system with auto output off during poor contact for patient safety. >Mounted with trolley with wheel for easy transfer. >Should have international safety standard with CE certified.

01pc 2000.00

2 Shortwave diathermy atleast 400 watt(micro processor controlled)

Shortwave diathermy atleast 400 watt(micro processor controlled) 1)High performance solid state generator with digital display. 2)High performance multi jointed arm 3)Continuous & pulsed mode(allows thermal & non thermal treatment) 4)Patient safety switch. 5)Must have CE certified. 6)Safety standard class 1

01 pc 8000.00


7)Captive & inductive applicator. 8)Frequency 27.12 Mhz 9)Must have disc electrode with adjustable arm. 10)Pad electrodes for larger ,smaller & irregular surface area(small sinus electrode preferable) 11)Strap & other standard accessory preferable(knee jt,low back, upper back.)

Gymnasium Equipments

3 Suspension frame

Suspension frame with bed and all accessories

01pc 1000.00

4 Multi gym or multi exerciser therapy unit

Multi gym or multi exerciser therapy unit

01pc 2000.00

5 Quadriceps exercise table

Quadriceps exercise table with quadriceps hamstring torsion arm. Foam padded table & torque unit with two lever arm, Adjustable resistance.

01pc 1000.00

6 Parallel bar adult

Parallel bar adult (height adjustable) 01pc 1000.00

7 Static cycle

Static cycle >Dual shock absorber. >Adjustable tension. >Digital meter showing- Distance, speed,& calorie.

01pc 200.00

8 Complex exerciser unit

Complex exerciser unit should have suitable for shoulder elbow chest abdomen and lower limb exercise should be gradeable and adjustable for resistance foam padded table top on tubular frame the unit should be dimension 185-195 X 70-80 cm wide and the height should be 80 -85 cm complete unit consist of one table pan assembly and following attachement - ankle, hip,

01pc 2000.00


wrist,knee,abdominal and back exerciser it should include strap, harness,and over head pulley systems different iron weight plates starting from 0.25 kg and 1 kg total upto 30 kg pelvic rest 1 quadriceps rest 1 supination pronation wheel 1 wooden cabinet for storage

Physical Fitness Equipments

9 Treadmill Treadmill - >Motorized at least 125 kg capacity, >AC motor : capacity >_2.0 H.P (peak>_4.0 H.P) >speed 1-18 kph, >Incline 0-16%, >convenient hand controlled speed &incline. >Quick speed, quick incline. >Easy incline, 5 program upland running. >Diverse speed & incliner program. >Self stop.

01pc 2000.00

OCCUPATIONAL THERAPY

10 Fluidotherapy

Fluidotherapy it should be used for double extrimity simaltaneously operated in pulse or continious mode treatment time adustable adustable air speed machine should mounted with wheel or trolley safety standard class 1 digital display should have dry heat media (cellulose particles) with the machine as accessories

01pc 1000.00


For hand exercise & rehabilitation

11 Finger Goniometer

Finger Goniometer 01pc 500.00

12 Goniometer Goniometer 01pc 500.00 13 Peg board Peg board 01pc 500.00

14 Wrist circumductor

Wrist circumductor 01pc 500.00

15 Grip exerciser Grip exerciser 01pc 500.00 16 Finger

exerciser Table

Finger exerciser Table 01pc 500.00

17 Finger dexterity board

Finger dexterity board 01pc 500.00

18 Hand Gym kit board

Hand Gym kit board 01pc 500.00

General exercise items

19 Over head pulley

Over head pulley 01pc 500.00

20 Inclined sanding board

Inclined sanding board 01pc 500.00

21 Horizontal sanding board

Horizontal sanding board 01pc 500.00

22 Shoulder wheel

Shoulder wheel 01pc 500.00

23 Balance board

Balance board 01pc 500.00


24 Foot placement ladder

Foot placement ladder 01pc 500.00

25 Bolster set Bolster set 01pc 500.00 26 Wedge board

set Wedge board set

01pc 500.00

27 Quadriceps table

Quadriceps table 01pc 500.00

28 Stand in frame

Stand in frame 01pc 500.00

29 Trampoline Trampoline 01pc 500.00

30 ADL training kit

ADL training kit 01pc 500.00

31 Low rise exercise platform

Low rise exercise platform 01pc 500.00

32 Cp prone stander

Cp prone stander 01pc 500.00

33 Cp chair Cp chair 01pc 500.00

34 Wheel chair for transfer training

Wheel chair for transfer training

01pc 500.00

35 Multiple gym exerciser

Multiple gym exerciser 01pc 500.00

Department of Orthopaedic (ESI Hospital , Manicktala)

1 DIGITAL ELECTRONIC TOURNIQU

Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of

2 sets 4000


ET:-

set point. Online Setting: Increase and decrease

in pressure settings Timer: Timer range from 9hours to

59minutes. Internal least count: Timer

1minute/Internal 1/1000 second. Alarm & Display Indication:- When set pressure is over When pressure goes 25mmHg above set



reaches 9V. Memory: Pressure set in earlier session

is stored and displayed, when machine is switched on again.


Backup: 3hours battery backup. (on full charge)

Switch over: Automatic switch over from offline to online (vise versa).

Power: 230V(AC)/50Hz ± 10% (Voltage fluctuations from 180-270).

Stabilizer: Inbuilt.


Cuffs: Different Sizes of five cuffs—washable & easy fitting (Paediatric, small, medium, big & large).


2 Titanium Elastic Nails

instrument set

Titanium Elastic Nails

The nail should be available in diameters – 2.0, 2.5, 3.0, 3.5 and 4.0 and length 440mm to cover all indications

The nail tip should be designed in such a way that the insertion is easy and the nail glides along medullary canal.

The design of the nail should allow fracture reduction and facilitate nail manipulation.

The implant should be available in titanium alloy (Ti-6AI-7Nb) that gives mechanical stability and elastic property.

The implant should have markings that allow direct rotational control of the nail tip in the medullary canal to reduce exposure to image intensifier

Titanium Elastic Nail set

The system should have a double drill Sleeve 4.5/3.2

The system should have a Drill Bit, 2.7mm dia., L 125/100mm 3-flute, for quick coupling



The system should have a Pin Wrench, 4.5mm, L 120mm

01 set

20,000


The system should have a Spanner Wrench for nos. 357.180/357.181

The system should have a Slotted Hammer 400g, detachable

The system should have a Locking Pliers that is flat nosed for TEN

The system should have a straight impactor and a bevelled impactor

The system should have an F-Tool The system should have an Awl that is curved and

has a sharp tip. The system should have an Extraction Pliers with

thread for TEN The system should have a Cutting Pliers for TEN The system should have a Hammer Guide The system should have an Inserter The system should have a SYNCASE Silicone Mat

170 x 460 mm The system should have a Lid for no. 675.420 The system should have a Tray, bottom, for

Instruments for 675.420 The system should have a Tray, middle, for

Instruments for 675.420 The system should have a Tray, top, for Implants

for no. 675.420 The system should have a SYNCASE Basic Tray,

height 145mm, neutral The system should have a Transport Case for

Syncase 3 Collinear

Reduction Clamp

The system should have a collinear reduction clamp with sliding mechanism that accepts four different attachment arms which can be mounted in four different positions using the mounting notches to accommodate various fracture types.

01 set 10,000


The cannulated feed rod of collinear reduction clamp should have a cannulation of ø 3 mm for temporary K wire fixation and a trigger for continuous and variable force application.

The reduction clamp should have a release button for adjustment of the attachment arm and release lever for the adjustment of the feed rod.

The system should have a reduction attachment for reduction against LCP plates for both large and small fragment plates which can be mounted on the tip of feed rod.

The system should also have a reduction attachment for reduction against LCP/ LC - DCP plates and for reduction against the bone which can be mounted on the tip of feed rod.

The system should have a combination wrench of Ø 8.0 mm for mounting the reduction attachments

The collinear reduction clamp should have various attachment arms which give a reduction tool according to different clinical needs - Hohmann shaped arm; Pelvic Arm; Percutaneous Arm, Bone Hook Shape arm.

4 PULSE LAVAGE SYSTEM

1. Irrigation pressure electronically

controlled.

02 sets

2000


2. Autoclavable & reusable tubes of medical grade silicon.

3. Complete Sterility is maintained. 4. Easy loading of the tube in the machine. 5. Efficient peristaltic pump. 6. Water Resistance Display. 7. Foot control operate machine. 8. Pre Set features. 9. Four types of irrigation possible. 10. Inbuilt fuse and voltage control rectifier. 11. Power Supply 230 V AC 50 Hz ± 10% 12. Stainless Steel Body

Department of Pathology & Central Research Laboratory (for ESI PGIMSR, Manicktala) 1 CRYOSTAT CRYOSTAT

1. Freely standing cryostat with chamber temperature

down to -35°C. Actively cooled quick freeze shelf with optional 2 station Peltier unit for freezing down to -40°C with Specimen storage shelf to store up to 8 chucks.

2. Maintenance free microtome with section thickness

setting preferably from 1 to 100 µm. 3. Equipment must be suitable for sectioning of

specimen having diameter at least up to 50 mm & facility of Specimen orientation must be provided.

4. Vertical Specimen Stroke length: 56 mm or above,

Horizontal Specimen feed: Approx. 25 mm

5. Provision must be available for Motorized (preferably at 600 μm/s &900 μm/s. – as rapid & slow respectively) coarse feed . Machine should have the Trimming facility via motorized coarse feed.

01 pc

40000.00


6. Blade holder system to hold both high profile & low profile blade preferably simultaneously. Disposable Blade holder system must be provided with lateral displacement and integrated glass anti-roll guide.

7. Should have facility for UV disinfection.

8. Preferably have Ag Protect nanosilver coating.

9. Electronic locking key to avoid any inadvertent changes in program setting & closed drainage system to allow control disposal of fluids

10. Automatic hot gas defrost, 1 automatic defrost cycle/24 hours, selectable time .

11. Specimen retraction : 20 μm

12. Specimen orientation : X‐Y axis 8 deg and Z axis 360 deg

13. Instrument should be supplied with disposable

blade holder for high and low profile blades, disposable blades (high profile and low profile), Specimen chucks, Brushes, Oil etc.

14. A 2 K.V.A online UPS also to be supplied with the instrument for at least 30 min standard backup.

2 SEMI-MOTORIZED ROTARY MICROTOME

SEMI-MOTORIZED ROTARY MICROTOME 1. Precision specimen orientation system with clear

zero reference point. 2. Force balancing system should be available for

effortless and uniform hand wheel rotation. 3. Section thickness setting from 0.5 to 100 μm, with

02 pcs

60000.00


a provision of step-by-step increment. 4. Specimen feed of appx. 28 mm or above and

vertical stroke length of 70 mm. 5. Trimming section thickness setting range: 5 – 500

μm with a provision of step-by-step increment 6. Precise specimen orientation of 8° in horizontal

and vertical direction. 7. Coarse feed : motorized with variable speeds. 8. Knife holder base with lateral displacement

facility for utilization of the entire Blade edge with clearance angle indication

9. Hand wheel lockable at any position with

additional 12’O’clock locking by simply pulling the handle

10. Slot cover to protect the interior of the instrument from sectioning debris.

11. specimen size: 50 X 55 mm

12. Section waste tray must be provided.

13. Section thickness indication-visual display.

14. System should be equipped with both High profile & Low profile disposable blade holder.

15. 5 packet of each blade (High profile & Low profile)

to be supplied with the instrument.

16. 2 K.V.A UPS also to be supplied with the instrument for standard 30 min back‐up.


17. It should be CE/ISO certified .

3 FULLY AUTOMATED SLIDE PREPARATION SYSTEM

FULLY AUTOMATED SLIDE PREPARATION SYSTEM

1. The system must be walk away fully Automated

Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.

2. There should be options for varying temperature and incubation time.

3. The system must be fully automated to do baking, deparaffinization, antigen retrieval and staining within the same system .

4. The System should be open for Primary antibodies.

5. The system should be able to generate fully prepared 60 IHC Slides in a 9-10 hour shift.

6. The system must have individual Slide heaters for all the slide positions,slide temperature should be individually controlled.

7. The system should have a mechanism which will

be able to control evaporation and protect tissue integrity on each slides.

8. The reagents and the antibody should get mixed

01 pc

48000.00


through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.

9. Only 100 micro litre of Primary antibody must be required for all types of slides irrespective of the size of the tissue section.

10. There should be free supply of reagents, buffer s and DAB for the first 200 Slides.

11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case identification.

12. The system should be US FDA certified.

13. Online UPS must be provided with minimum one hour back.

14. The system should have compatible computer

and software of latest technology available during installation. The software should be upgradable.


4 Real-Time

PCR Real-Time PCR:

1. The Real time PCR System must have International and/or National

quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and /or IVD certified.

2. The Real time PCR System should have an open platform system, and must

have provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases

3. Ready to use DNA and RNA master mixes should be available

4. The Real time PCR System must at least have the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :

Human Immunodeficiency virus Hepatitis B virus Hepatitis C virus Cytomegalo virus Epstein Barr virus Herpes Simplex virus

5. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.

6. System should be capable of running two different assays simultaneously in a

single run. 7. System should be able to run both standard mode PCR as also FAST mode runs.

8. The Automated Real time PCR System should be accompanied with a desktop or

laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine. Systems should be supplied with latest Pentium computer with color monitor and printer. It should have an interface to laboratory host computer. System software should be based on Windows XP and validated for IVD application.

01 pc

48000.00


9. Remote data monitoring via connected/networked PC and download data

10. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.

11. Thermal Cycler Mechanism:- Peltier based heating and cooling mechanism for maximum uniformity with even heating and cooling, with temperature accuracy of ±0.5°C and temperature uniformity of ±1°C.

12. Calibrated dyes set on installation:- FAM/SYBR Green, VIC/JOE, NED/TAMRA/Cy3, ROX/Texas Red, Cy5. Calibration for new dyes within the wavelength range should be possible by following the custom dye calibration procedure in the User’s Manual without purchase of additional filter sets.

13. Sample Layout:- Should be flexible for the tube input volumes having capability of running 96 or more samples.

14. Any additional step of centrifugation of tubes while performing the assay

should NOT be there.

15. Should come with standard chemistries for gene expression, quantification, mutation scanning, allelic discrimination, genotyping and methylation studies. System should be able to add a melt curve during a run if required. Instrument should be able to distinguish between 5,000-10,000 DNA genome equivalents (a two-fold difference in copy number) with confidence level up to 99.7%.

16. Temperature range should be from 4°C - 98°C with a ramp rate of 1.2°C / sec and a ramp rate of 3.6ºC for FAST run. Peak block heating rate of 5.5°C.

17. Halogen lamp source with 5 different wavelengths with minimum cross-talks. The assay should not be based on one single wavelength of light. Should be able to detect all wells equally with same optical path length. Should maintain iso-optical detection in all wells for maximum uniformity with CCD camera.

18. System should be 5 color & capable for multiplexing. Should have 5 excitation filters and 5 emission filters to cover wide chemistries. Each sample in each well should be monitored with dedicated fiber optic bundle to have improved sensitivity for fluorescence measurement and to avoid cross talk.

19. Reaction Volume 5 μl-30 μl


20. Should NOT require any passive reference dye

21. System should use close tube process to avoid any cross contamination.

22. Software: Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine, with additional features of creation of customer genotyping, DNA quantification, gene expression, and pathogen detection assays, resulting in creating template files that can easily be saved and used to run assays that require set protocols.

5 MINI VERTICAL GEL SYSTEM

MINI VERTICAL GEL SYSTEM

1. Gel Size should be minimum 8.3 x7.3 cm (W x L)

2. Glass Plate Size minimum dimension should be

Inner - 10.1 x 7.3 cm

Outer - 10.1 x 8.2 cm

3. Should be IEC 1010/ CE Certified.

4. Same system should be able to perform western blotting, 2D/tube gel electrophoresis & electro elution also.

5. No. of wells: 10, thickness: 1.0 mm

6. The system should accommodate upto 4 handcast or precast gels at a time.

7. Typical run time should be less than an hour

8. Buffer volume: Less than 200 ml for each of the chambers

9. Should come with the facility to run 4 gels together with companion running module.

01 pc

4000.00


10. Buffer volume : 700 ml for 2 gels and 1000 ml for 4 gels.

11. Same System Should be compatible with electroelution and western blotting in the same tank

12. Should come with consumables for at least 100 reactions.

13. POWER SUPPLY:-

• Voltage Output range (programmable): 5-250 V, fully adjustable in 1 V increments;

• Current Output range (programmable): 0.01 to 3.0 A, fully adjustable in 0.01 A increments

• Power output range (programmable): 1-300 W, fully adjustable in 1 W increments

Output Type: Constant voltage, Current or Power with automatic

crossover

Output terminals: 4 pair recessed banana jacks in parallel

Pause / resume function should be available.

2-line, 16 character backlit LCD is preferred.

Add-on safety features like “No-load” detection, rapid resistance change detection, ground leak detection;

overload / short-circuit detection; overvoltage protection; over-temperature protection are must. The system should comply with EN61010 or equivalent safety compliance.


Input protection: Fuse on hot and neutral.

6 SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING

SEMIDRY TRANSBLOT SYSTEM FOR WESTERN BLOTTING

• The system should allow fast, efficient and economical blotting without buffer tank or gel cassettes.

• Spring mounted platinum coated titanium anode and

stainless steel cathode plate electrode to provide consistency and reproducibility in results, durability and extended life-span of the equipment.

• Maximum Gel Size should be 24 cm x 16 cm

• The system should be capable of transferring multiple gels

simultaneously.

• Current requirement should be upto 3000mA.

• Special agarose gel support frame for performing southern blotting in the same system as an add-on facility would be preferred.

• Should come with consumables for atleast 100 runs Power pack should have maximum output: 250V, 3.0A, 300W with the programmable facility for each parameters are as follows.


• Current Output range (programmable): 0.01 to 3.0 A, fully

adjustable in 0.01 A increments

• Power Output range (programmable): 1-300 W, fully

1 pc

8000.00


adjustable in 1 W increments

Output Type: Constant voltage, Current or Power with automatic crossover


Timer: up to 99 hr, 59 min



Add-on safety features like “No-load” detection, rapid resistance

change detection, ground leak detection; overload / short- circuit detection; overvoltage protection; over-temperature protection

are must.

The system should comply with EN61010 or equivalent safety compliance.


7 Fast

blotting

system

Fast blotting system

1. Fast blotting system for blotting four gels simultaneously

2. Should have USB ports for filmware transfer

3. System should have a cooling fan

4. should have inbult power pack supply

5. should have user interface

6. should have an audible alarm

01 pc

4000.00


7. should have user notification with following features

power fail during run

no load detection

no cassette detection

end of run

8. should have user defined programmable methods minimum 25

8 ELECTROPORATOR

ELECTROPORATOR

1. Electroporator system with the capability to electroporate eukaryotic cells, prokaryotic cells (bacteria), yeasts and other microorganisms.

2. Instrument should have features for adjusting voltage & pulse length

3. Pulse Voltage range : 10-3,000 V

4. Should include all accessories for electroporation

5. It should also have required software, pre-set optimized programmes and other accessories

01 pc

16000.00

9 MILLI Q WATER PURIFICATION SYSTEM

MILLI Q WATER PURIFICATION SYSTEM The complete water purification system should comprise of two stages as below: Stage I Stage 1 of the system must comprise of the following:-

01 pc

20000.00


The tap water supply generally has a particulate reading of 1200 ppb. A suitable pre-filtration system for bringing the concentration from 1200 ppb to 100 ppb before use with the R.O. System should be provided. RO water system with a dispensing rate of 1 Liter per minute or better and large cartridges of over 20 inches each for a long life. The removal efficiency of the RO water system should be as follows:- Suspended solids- 100%, Bacteria - 99.5%, Viruses -99.5%, Pyrogens - 99.5%, Organic, molecular weight >250 daltons - 97-99.5%, Monovalent inorganics - 94-96%, Divalent Inorganics - 96-98%, Trivalent Inorganics- 98-99%. The water quality should be suitable enough for general microbiology, general immunology and other activities such as glassware washing, deionization systems, glassware rinsing, buffer solution preparation, standard solution preparation etc. 2 extra prefilter, carbon filters ( total 3 each) to be included. Storage tank of around 15 -20 Liter at outlet of RO. System should include automatic flush valve, which extends RO membrane life: It should automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity. STAGE II For Ultra pure water Water quality must be good enough for Inorganic analysis: Ion chromatography, Inductively coupled plasma/mass spectroscopy, Atomic absorption, flame emission spectroscopy, trace metal analysis, Organic analysis such as Liquid chromatography, HPLC, Gas chromatography, Electrophoresis, Total organic carbon, Tissue culture, Clinical, General Microbiology, General Immunology, Recombinant DNA etc. Purification technique used / filters included to be as follows :- Carbon filtration, De-ionization - 2 no’s of polishing grade mixed bed, Organic adsorption cartridge, Ultrafiltration 0.1 micron, Ultraviolet reactor ( with dual wave length of 185 & 254 nm), hollow fiber filter (optional). Smart independent dispensing system (Dispensing Gun) for low volumes of ultra pure water. In line pressure regulator. Dispensing flow: 1.5 - 2 L /minute of Type I or


1 L/ m with hollow fiber filter Extra membranes to be included within the offer: Pre-filters and Carbon Filters for RO system :- 18 No.’s each R.O. : 2 No.’s Polishing Station / Ultrapure Station : 2 Sets each complete. All items necessary to operate equipments must be quoted.


10 LIQUID

NITROGEN VAPOUR STORAGE SYSTEM

LIQUID NITROGEN VAPOUR STORAGE SYSTEM

1. Liquid Nitrogen (LN2) storage system for long term preservation of Frozen samples in 100% vapor phase at -190 degrees Centigrade with no contact of sample with lLN2

2. Should be jacketed model

3. Capacity for at least 30 litres of LN2 in outer jacket

4. Minimal interior temperature gradient from bottom of

Chamber to below the lid

5. LN2 level indicator and safety relief valve should be present

Minimum 8000 of 2ml cryovial storage capacity in racks and boxes (all racks and cryoboxes should also be provided with 1 set spare rack and its set of boxes)

6. LN2 system should be safely mounted on castors for easy and safe mobility when when loaded

7. Automated real time display monitor below the lid

8. Automatic filling and control of LN2 level

9. Alarms for deviations from set values of level and

temperatures

10. Self diagnosis at start up

11. Program lock to prevent unauthorized intervention

12. Should have temperature log software for

01 pc 4000.00


monitoring the parameters continuously and its history

13. Liquid Nitrogen Cylinders (2 in number) to connect

to the storage vessel in order to automatically re-fill LN2 in the storage vessel as and when required. Capacity of Cylinders to be minimum 200 litres each, 22 PSI liquid delivery, equipped with LN2 level and pressure gauges and safety relief valve and mounted and restrained on castors for easy mobility.

14. Should be connected through Y connection: 1, LN2

transfer hoses 03.

15. Should have inventory system for 2 ml cryovials

16. Racks should have locking system to prevent fall out of sample storage boxes

17. Should provide 2 sets of LN2 safe cryogloves IQ/OQ/PQ validation documents should be provided

11 BIOSAFETY

CABINET( Class II type B2)

BIOSAFETY CABINET( Class II type B2)

1. Biosafety cabinet Class II type B2 with 100% exhaust for cell and tissue culture work.

2. Compliant with standard norms for biological safety, air quality, filtration and electrical safety.

3. Should allow working with agents assigned as BSL – 1& 2.

4. 4 feet wide with internal working area of at least 6 square feet.

5. Programmable microprocessor controlled operation.

6. Single piece stainless steel working tray without

welded joints to collect contamination or rust.

01 pc

10000.00


7. Robust dual wall cabinet construction with negative pressure plenums around the work zone.

8. High performance, long life fan systems

(HEPA/ULPA) with efficiency of air filter >99.9%. 9. Average airflow: Inflow – 100fpm or higher,

Downflow – 60fpm or higher

10. Low noise level (<60dBA) and vibration free.

11. Adequately illuminated work zone with provision of UV light for decontamination.

12. Digital display for Air flow, UV, etc with timer

function for UV light. 13. Front window/sash should be made of non-

reflecting, laminated safety glass.

14. Should be provided with electrical outlet, water/media and gas inlet.

15. Should have supporting stand with wheels, foot-rest and adjustable lab chair

12 CO2

INCUBATOR

CO2 INCUBATOR

1. System : A system with access port and reversible doors, Alarm for CO2 level and temperature and rounded corners in Inner chambers

2. Contamination control : Preferably by Copper mixed alloy interior chamber with UV light / HEPA Air filter

3. Capacity : 160-225 litres

4. Model/Body : Low profile, stackable

5. Temp. Range : RT + 5ºC to 50ºC

01 pc

12000.00


6. Temp. Uniformity : ± 0.3ºC or lesser

7. Temp. Control : ± 0.1ºC or better using

microprocessor based accuracy technology with digital display

8. Humidity : 95% ± 5% RH

9. CO2 Range : 0-20% with accuracy of ±0.2% or

better

10. CO2 Sensor : Infra-red based sensor

11. No. of Shelves : 4 or more 12. Other Feature : The system should have

International QC certification and be supplied with CO2 cylinder

13 SONICATOR

SONICATOR

1. Model should be probe based, compact, benchtop

size, programmable and suitable for cell disruption and homogenization.

2. Power rating 500W or higher with working frequency of 20-25 kHz.

3. Piezoelectic based converter with required

converter cable.

4. Amplitude setting range 20% to 100% or better.

5. Programmable timer with adjustable pulse sonication.

6. Efficiency 90% or higher.

01 pc

10000.00


7. Supplied with standard probe (with replaceable

tip) along with additional probes for sample volume 0.2ml to 250ml.

8. Digital display for monitoring parameters like

wattage, amplitude and energy.

9. Jack stand, mounting system and sound proof box included.

10. Inbuilt overload protection.

11. Lead free and ROHS compliant.

14 SHAKER INCUBATOR (Refrigerated)

SHAKER INCUBATOR (Refrigerated) 1. Model : Refrigerated table top shaker with

provision of stationary tray for incubation of petridish/ culture plates and clamp sets for flask of different sizes (100ml to 2 litre)

2. Body : Exterior : Made of steel Interior : Made of stainless steel

3. Temperature range : 10ºC - 75ºC or better

4. Temperature accuracy : ± 0.5ºC

5. Shaking Amplitude : 25mm/ 30-350 rpm with ± 2%

deviation

6. Tray size : 40 cm X 40 cm or bigger

7. Other features : Accurate PID control for temperature reliability.

8. Timer and alarm for speed and temperature.

01 pc

6000.00


9. Fluorescent lighting and UV for decontamination.

10. Safety device for overload and overheating protection

15 MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE

MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE

Bench top model with small footprint with heating, cooling and mixing functions Facility for interchangeable block (with automatic block recognition feature) to accommodate plates and tubes ranging from 0.2ml to 50ml, Touch keypad with digital display of time, temperature and mixing speed, All three parameters to be freely programmable.

Mixing: circular with anti-spill technology for efficient mixing without wetting and contamination in tubes and plates and mixing frequency up to 30000 rpm.

Temperature: Peltier based system, temperature

range from 150C below ambient to 1000C accuracy of ±0.50C at 20-450C, heating rate of at least 60C/minute and cooling rate of 2.50C/minute.

Heated lid to prevent condensation on lid and sides

of the tube.

01 pc 16000.00


To be supplied with block for 24x1.5ml Micro

Centrifuge tube. 16 AUTOMATED

NUCLEIC ACID

WORKSTATION/NA

PURIFICATION SYSTEM

AUTOMATED NUCLEIC ACID WORKSTATION/NA PURIFICATION SYSTEM

• Should be a complete compact automated

nucleic acid isolation/purification workstation.

• Should be able to process 8 samples at a

time.

• Sample volume 100-1000µl

• Elution volume 50-200µl

• Should able to process broad variety of samples types including

whole blood, blood cells, plasma, fresh or FFPE tissue, body fluids, cultured cells, bacteria, clinical sample. (Should free from cross-contamination &can be used for PCR/RT PCR reaction.)

• Run time should be 20-25 minute or less

according to batch size.

• Should be based on Magnetic bead technology for isolation of Nucleic acid. (DNA/RNA/TNA)

• There should not be use of any manual steps

& no other external device like vacuum pump or tubing/pumps are required.

01 pc 44000.00


• Should have preinstalled protocols & no

external program cards are allowed.

• Should have integrated HEPA filter, UV decontamination for less

cross contamination as well as bar code scanning facility for easy sample tracing including tip loss & clot detection.

• Should be provided with starter Nucleic acid

(DNA/RNA) purification/isolation kit.

• All international certificates including CE, CB & original software license should be provided.

• Power supply 100-240 vac + /-

10%50/60HZ+/-5% 17 VERTICAL -

80°C FREEZER

VERTICAL -80°C FREEZER

1. Temperature range -50°C to -86°C and adjustable with a setting accuracy of +1°C

2. Internal capacity should be minimum 400 litres and should accommodate 15 racks, 240 boxes of 2” height to keep 24000 nos. 2ml vials at least

3. Powder coated solid outer cabinet to prevent corrosion

4. Inner cabinet should be made of oxidation free, rust free and scratch less stainless steel

5. Should have 5 chambers with 4 height adjustable shelves, each chamber should have individual inner door to prevent cold loss

6. Full racks and boxes should be quoted 7. Must maintain -86C° even at ambient temperature of

32°C 8. Pull down time should be < 5 hrs

01 pc

48000.00


9. Microprocessor control for operation with integrated audio visual temperature alarm function with digital monitoring display.

10. Must have auto restart function after power failure with non-volatile memory

11. Should have automatic reset function to protect the microprocessor controller from damage by electrical spikes

12. Battery back for display and alarm during power cut. 13. Should provide electronic chart recorder system

with integrated alarm and auto-dialer facility. By this, user should be able to access data anytime from anywhere using internet, it should to warn the user about the freezer malfunction through phone and email notification. Historic data recording i.e graph should be viewed by hours, days or months with atleast three months data displayed at one time

14. Heavy duty hermetically sealed two stage compressor ( 4x¾HP) to maintain inner temperature below -86°C

15. Refrigerant should be CFC free 16. Should have space saving foot print (WxD): 80 x 86

cm 17. Should have diagnostic software for fault condition. 18. Should provide C02 back up system with all

necessary set ups i.e CO2 cylinder etc

19. Should have heated air vent to ease the door open during vacuum formation within the chamber

20. Power consumption should be < 8.5kWh/day 21. One fan circulation to lower the noise and power

consumption 22. Insulation should be of 130mm thick with

combination vacuum insulation panel and polyurethane foam. Vacuum insulation should have metal coated polymer film barrier seal to maintain vacuum strongly.

23. Should have lockable castors for free and easy mobility


24. To be operational on 220 to 240 Volts at 50 Hz. Single phase

25. Should have CE and UL certification 26. Should be supplied with compatible voltage

stabilizer 18 Binocular

LED Microscope

Binocular LED Microscope

1. Microscope should have Infinity Corrected Optical system for Bright field applications.

2. Microscope should have right hand stage Stand with 4 positions Nosepiece, Universal Power Supply, Mechanical stage with non-extending rack and slide holder, Long life LED Illumination with Auto off facility, built in handle and cord wrap. Dust cover, Manual.

3. Binocular tube with 30° inclination for easy viewing.

4. Magnification from 40X to 1000X with 10 X eyepieces with Objectives of 4x,10x,40x & 100x (OIL)

5. FOV should be 20mm 6. IPD should range from 52mm – 75mm 7. Abbe Condenser 0.9A dry with relevant sliders. 8. Should have integrated vertical handle for easy

carrying & easy lifting with integrated cord wrap to eliminate damage to microscope components.

9. Slide holder should be student friendly to avoid slide chipping.

10. Should have transmitted LED illumination of 6000K temp., 25,000hrs. life at full intensity-providing cool white light with a lifetime of at least 20 years for cost saving

11. Stage should maintain its dimension with round edges eliminating chance of injury with additional protection from friction damage.

12. Preferably AgTreat (anti microbial) to be incorporated for eliminating growth of bacteria

10 pcs

60000.00


13. Should have time delay shut off automatically to save energy with disabled & enabled option also.

19 PLATELET

FUNCTION

ANALYSER

PLATELET FUNCTION ANALYSER

1. Must be suitable for Simple, rapid and precise assessment of platelet function

2. Accurate detection of inherited, acquired or induced platelet dysfunction

3. Detect vWD 4. Detect platelet P2Y12 receptor blockades in

patient undergoing therapy with P2Y12 receptor antagonist

5. Start up reagent and cartridge for 100 tests 6.Test system Principle: High-shear force dynamic flow system • Measuring channel: Single measuring channel • Incubation category: Two incubation wells • Incubation temperature: 37.9 °C ± 1.0 °C • Incubation warm-up time: < 15 minutes (room to operating temperature) • Trigger solution: Illuminated trigger solution viewing area 7. Sample Handling • Type of sample: Citrated whole blood • Sample mechanism: Manual pipette dispensing (800 μL) • Barcode identification: external barcode reader for sample identification 8. Reagent Handling • Type: Single disposable self-contained test cartridges • Reagent recognition: Positive optical coding reagent cartridge identification

01 pc

44000.00


• Additional reagent: Trigger solution 9. Throughput • Single test: P2Y, Col/EPI, or Col/ADP: 6 tests/hour • Duplicate test: Col/EPI or Col/ADP: 10 tests/hour 10.Software • Interface: Color LCD touchscreen • Host connection: Unidirectional, external RS-232 DB-9 port or ethernet network • Stored patient results, control results, and maintenance events: Last 1,000 results • USB port: Software updates, printer, barcode scanner,and result export • Quality control: Built in • Onboard help • Instrumentation status: Clear status messages (red, yellow, and green) 11. Power Supply • Operating voltage: 100 – 240 VAC • Main frequency: 50 – 60 Hz • Current (maximum): 1.38 A @ 90 VAC 12.Environmental Conditions • Operating temperature: 18 °C – 29 °C • Non-operating storage: -29 °C – 50 °C • Relative humidity: 20 – 90 % • Operating humidity: 20 – 90 % RH (non-condensing) • Non-operating storage humidity: 0 – 95 % RH (non-condensing) • Degree of protection: according to IEC 60529 • Heat emission: 94 kcal/h (375 BTU/h) 13. Online UPS with 30 minutes backup


20 BLOCK

CABINET

BLOCK CABINET

1) Made of CRC sheet duly powder coated.

2) Should have index card holder and handle

for each drawer.

3) Should be provided with lock and key

4)Capacity 20000 blocks

02 pc 16000.00

21 SLIDE

CABINET

SLIDE CABINET

1) For placing slides in horizontal manner

2) For safe and easy handling of 75 × 25 mm

slides.

3) Made of mild steel sheet.

4) Well designed for performance and

durability.

5) Powder coated paint outer finish with

smoothly working doors fitted with handle,

lock and key.

6) The anodized aluminium slide strays for

holding 75 × 25 mm slides, have been

arranged separately so as not to disturb

other compartments while taking out or

putting in the slides.

7) The size of the tray approx 350 × 210 × 35

mm and nicely fitted with uniformly slotted

aluminium carrier each holding slides in

horizontal position.

8) Fitted with index card holder.

9) Capacity 20000 slides.

02 pc 8000.00


22 UV

Sterilization cabinet

UV Sterilization cabinet

1. Destroys unwanted PCR products in less than 30 minutes

2. Built in timer control 3. Protects the sample from user

contamination 4. Protects the user from Biohazard samples 5. Four powerful, timer controlled UV tubes,

combined with optimal reflectors, provide efficient irradiation of the complete work surface

6. Doors equipped with safety cutouts 7. To be provided with safety trays and easy

to clean tray liners 8. Safety interlocks on the cabinet doors

prevents the user from any exposure to the

UV light 9. To be provided with required accessories such

as height adjustable stool, etc

01 pc 3000.00

23 Micro Centrifuge for 0.2ml PCR

tubes

Micro Centrifuge for 0.2ml PCR tubes

1. Quiet and reliable. 2. Small foot print. 3. Independent on/off switch 4. 2 place rotor for 8x0.2 ml tubes 5. 6 place rotor for 1.5ml tubes 6. Fixed speed of 6000rpm/2000g

04 pcs

32000.00

24 Micro Centrifuge for 1.5

ml/0.5ml PCR

Micro Centrifuge for 1.5 ml/0.5ml PCR Tubes

1. Quiet and Reliable 2. Small foot print

3. Built in power supply

03pcs

24000.00


Tubes

4. Digital display of time and speed

5. Standard 6 place rotor for 1.5 ml tubes

6. Spare 12 places rotor for 0.5 ml tubes

25 Vertical

Laminar

Air Flow

Cabinet

Vertical Laminar Air Flow

Cabinet 1) Inner work surface width a minimum of 2 feet

for easy handling of samples 2) Laminar Air Flow Cabinet should be tested for

cross-contamination and product protection using microbiological test methods specified in EN12469.

3) Sentinel Microprocessor-Based Control & Alarm

System 4) ISO Class 4 Air Cleanliness

5) Front Sliding sash 6) Cabinet Construction

a) Main Body : 1.2 mm / 0.05”/ 18 gauge electro-galvanised steel with white oven-baked epoxy powder-coated finish

b) Work Zone : 1.2 mm (0.05") 18 gauge Stainless Steel, grade 304, 4B finish. Single

piece stainless steel work surface with a curved front edge for maximum operator comfort

c) Side Walls : Colourless and Transparent UV absorbing tempered glass to enhance

visibility inside the work area. 7) Raised Front edge.

8) Temperature compensated Air velocity sensor.

9) HEPA Filter Typical efficiency - 99.99 % for particles size at 0.3 microns.

10) Additional disposable pre-filter with 80 %

02 pcs 16000.00


arrestance to trap large particles in the inflow

air prior to reaching the main filter, protecting against damage and prolonging filter life.

11) External surfaces should be powder coated with Isocide Anti-microbial coating to eliminate

99.9 % of surface bacteria within 24 hours of exposure.

12) Permanently lubricated, high performance, energy efficient, centrifugal motor/fans. less

electrical energy consumption. Completely integrated assembly to optimize motor cooling.

All rotating parts should be balanced for smooth, quiet and vibration-free operation.

13) Sound Emission : < 61 dBA as per IEST-RP-CC002.2

14) Electrical 220-240V, AC.

15) To be provided with additional accessories-

i) Support stand with adjustable height. ii) UV lamp for decontamination. iii) Ergonomic height adjustable Lab chair.


SL. NO.





EMD VALUE

QUOTED (YES/NO)

26 Class II

Biological Safety Cabinet Type A2

Class II Biological Safety Cabinet

Type A2

1. Size atleast 1.2 X 0.6 X 0.6 meters

2. EN 12469 Certified 3. Recirculation 70% & Exhaust 30%

4. Average Air Flow Velocity: (1) Inflow : 0.45 m/s (90 fpm) at

initial setpoint, audible/visual

alarm should activate at 0.40 m/s (80 fpm)

(2) Downflow : 0.30 m/s (60 fpm) at initial setpoint with uniformity of better than +/- 20%

5. Noise Level < 62 dBA according to EN 12469

6. Cabinet Construction: (1) Main Body: 1.2 mm (0.06") 16

gauge electrogalvanized steel with

white oven-baked epoxy antimicrobial powder coated finish

Work Zone: 1.5 mm (0.06") 16 gauge stainless steel, type 304,

with 4B finish Interior work area formed from a single piece of stainless steel with large radius

corners to simplify cleaning. 7. ULPA filters with efficiency greater than

99.999 % for superior operator and

03pcs 36000.00


product protection

8. Standard Compliance : 1) Filter performance - IEST-RP-

CC034.1, IEST-RP-CC007.1,

IEST-RP 2) Electrical Safety - IEC 61010-1 /

EN 61010-1 / UL 3101-1 / hsirig, CSA C22.2 No. 1010.1-92

3) ISO Class 3 air cleanliness in work

zone.

9. Negative pressure plenum should surround contaminated positive pressure plenum for quiet, uniform airflow

10. Microprocessor Control with temperature compensated airflow sensor

for supervising all cabinet functions.

11. Antimicrobial coating on all painted surfaces to protect against surface

contamination.

12. Advanced separatorless mini-pleated ULPA filters tested to > 99.999% efficiency for 0.1 - 0.3 micron

particulates.

13. Digital read-out with alpha-numeric display should indicate all input, status

and alarm functions.

14.The cabinet work zone should not have welded joints to collect contaminants or

rust.

15.Blower should be Electronically Commutated Motor (ECM)

16. A recessed central area and stainless

steel drain pan channels for preventing liquids from entering the lower filtration and blower systems


17.Angled viewing window and narrow

profile front grille to improve reach into the work area

18.Front armrest raised above the work zone to improve comfort and to ensure

no airflow blockage

19.Frameless, shatterproof sash for easier cleaning, and for larger, unobstructed

viewing area

20.The Biological Safety Cabinet Should be individually tested, documented by serial

number and validated with the following test methods.

21.Inflow / downflow velocity PAO Aerosol

challenge for filter integrity Light, noise and vibration Airflow pattern

visualization Electrical safety to IEC61010-1

22.Electrical 220-240V, AC,

23.To be provided with additional accessories-

(a) UV Lamp (b) Ergonomic height adjustable chair.

27 Vortex

Mixer

Vortex Mixer 1) 1200 rpm 2) 220/230 V AC

3) Size 12” × 12”

03pcs 30000.00

28 Water

Bath

Water Bath 1) Double walled made of stainless steel.

2) Outer wall powder coated 3) Space between double walls is filled with

glass wool for insulation 4) Provided with drain plug for easy emptying

5) Reliable immersion heating elements

03 pcs 3000.00


6) Thermostat controlled temperature from

ambient to 100 degree Celsius +/- 0.5 7) Digital Display of temperature with

appropriate regulators, on /off switch,

alarm 8) Suitable to operate on 220 V AC supply

9) To be provided with accessories (1) Stirrer with S/S rods and blades (2) Test tube racks of S/S

29 Single

channel micropipette

Single channel micropipette 1) Single channel variable volume 0.1µl-

2/2.5/5 µl

2) Systematic error should not be more than 3% at minimum volume and 1% at maximum volume

3) Minimum resolution of volume 0.001µl 4) Easy digital volume setting

5) Enhanced UV resistance 6) Precise reproducibility for long hours 7) Tip ejection automatic

8) User technical manual to be supplied in English

9) Certificate of calibration and inspection should be provided

10) Spare parts and accessories to be provided

with pipettes. 11) Should provide compatible stands

05 pcs 2500.00


SL. NO.





EMD VALUE

QUOTED (YES/NO)

Department of Pathology(For ESIC

HOSPITAL, JOKA & Manicktala)









01 pc For ESIC HOSPITAL, JOKA

48000.00





8. The reagents and the antibody should get mixed through air whirlpool and no mechanical part should be involved for mixing the reagents and antibodies.









2 Fully Automated

Urine Analyzer

Fully Automated Urine Analyzer 1. Random access system for physical, chemical and

sediment analysis on urine specimens.

2. Multiparameter Chemistry analysis of at least 10

parameters including:

(a) Specific gravity

(b) pH

(c) Albumin

(d) Glucose

(e) Ketone Bodies

(f) Bilirubin

(g) Urobilinogen

(h) Blood/Hemoglobin

(i) Micro albumin

(j) Nitrite

3. Analysis of standard urinary sediments consisting of

different cells, casts and crystals.

4. Throughput-60/hour including sediment analysis in

random access mode.

5. Microprocessor based photometric analysis of

chemical parameters and flat flow cell technology

with high speed and 800-1000 frame imaging for

sediment analysis.


40000.00


6. Interconnected parallel pc with appropriate soft

ware for –

Retrival of analysis data

Display of analysis data

Image display of formed elements

Storage of data of results and others atleast

10,000 in number

7. Bar coded facility for reagent and sample

identification

8. Laser colored printing of results and data

9. Power back up with UPS for at least 2 hours

10. Accessories

a. Sample rack to hold 50 samples-05

b. Reagents for start up- 1000 analysis

c. International certification for medical equipments

3 Bone decalcifier

automated,

electrolytic

decalfication system

Bone decalcifier automated, electrolytic decalfication system, holding capacity for 30 cassettes and at least 700ml decalcifying solution, digitally controlled.


2000.00

4 LBC Specifications for LBC

1. Automated system for processing of Gynaecological and non- gynaecological cytology samples for liquid based cytology


30000.00


along with automated stainer. 2. Should have ability to make single slides which

is uniform and reproducible. 3. Should have a controlled membrane transfer

technology to make a thin smear with uniform distribution of cells.

4. System should allow residual material to be used for ancillary testing such as HPV, CT/NG, Immunocytochemistry, Special Stains, cell blocks etc.

5. Should have an automated slide stainer with an ability to run at least 30 slides in half an hour.

6. UPS with two hour power backup. 7. CE certificate

Accessories:

1. Microscopic slides- 2 boxes of 100 slides 2. Filter- 2 box to process 200 samples 3. Solution -2 box to process 200 samples 4. Preservative solution -2 box to process 200

samples 5. Staining kit for staining at least 200 smears 6. All the standard accessories to be provided with

the equipment. 5 Patient and data

management

system

Patient and data management system for laboratory services

1. Fast processing system with high end security having

several different modules for patient and data

management of the laboratories.

2. Should have the ability to generate unique

identification number of the patient starting from

lab registration, sample collection, testing and

report delivery with generation of bar code id, and


40000.00


stickers.

3. An integrated token system for the patients while

waiting for sample collection.

4. Computer with bar code reader in registration,

sample collection, different labs ( clinical pathology,

Cytopathology, hematology, histopathology,

different sections of biochemistry and microbiology)

5. Easy to operate

6. Ability to store data of at least 5000 patients per

day.

7. Data to be accessible on mobile, laptop, tablets etc

and the ability to deliver SMS to target

people(patients as well as doctors).

8. Result modification before final report delivery.

9. Can be integrated with other automated lab

equipments.

10. New features can be upgraded time to time as per

requirements

11. Accessories for the system to be supplied along with

the software.

6 Automated Cover Slipper

Automated Cover Slipper 1. Fully automated unit with a through

put of 400 slides/hr. at least

2. Should be compatible with different


40000.00


sizes and thickness of cover slip as

written below.

(a) Size – 40mm, 50mm, 55mm, 60mm.

(b) Thickness – 0.13 – 0.17mm.


solvent like xylene, d-limonene and

aliphatic hydrocarban –based

substitute and mounting medium like

DPX etc.

4. Should be able to handle both histology

and cytology sample simultaneously.

5. Should have an in-built filter to remove

any vapors or fumes.

6. Easy to operate with different program

setting and a touch screen panel.

7. Should be able to accept slides from

different automated slide stains.

8. UPS for 1hours back up.

9. International CE certification for

medical equipment.

Accessories – 1. Cover slips of different sizes &

thickness – 500 each.

2. Dust cover.


3. Standard accessories with the main

equipment.

7 Human morbid tissue

materials

Specification for human morbid tissue materials

For ESIC HOSPITAL, JOKA

Cardio-Vascular Mitral stenosis Atheroma aorta Lt. ventricular hypertrophy Fibrinous pericarditis Dilated Cardiomyopathy Infective endocarditis

2 each 500.00

Respiratory Lobar pneumonia Bronchiectasis Emphysema Pulmonary Tuberculosis fibrocaseous & miliary Bronchogenic carcinoma Silicosis Bysinosis

2 each 500.00

Gastro-Intestinal Peptic ulcer Typhoid ulcer of S.I.

2 each 100.00

Renal Granular contracted kidney Large white kidney Hydronephrosis Renal cell carcinoma Renal stone

2 each 200.00

Vascular Syphilitic Aortits 2 each 50.00

Bone Osteomyelitis-sequestrum TB spine Osteogenic sarcoma Giant cell tumor

2 each 200.00


Female Genital Fibroid uterus Carcinoma cervix

2 each 100.00

Hepato-Biliary Micro-nodular cirrhosis Fatty liver Metastatic liver HCC

2 each 200.00

Female Breast Carcinoma breast 2 each 50.00

Male Genital Carcinoma Penis Seminoma of testis Benign hyperplasia of Prostate

2 each 100.00

Lymph Node TB Lymph Node Hodgkins LN 2 each 50.00

8 GROSSING TABLE WITH BIOSAFETY HOOD

1. Should be of High-quality stainless steel construction with Formalin container and height adjustment via electro hydraulic mechanism.

2. Vacuum breaker-protected water supply 3. Ventilation system with Two

options(outside source or inbuilt) 4. Large sink with mixing faucet 5. Ample lighting 6. Magnetic instrument holder 7. Washable dissecting board 8. Must have Service centre in Kolkata

9. Accessories to be provided with Grossing Station:

Grossing board to accommodate a wide range of

tissue types. Should have two adjustable wells to ensure grossing to an exact thickness

Integrated rulers on the standard and large boards

to enable gross measurement of specimens. Trimming knives and scalpel blades to provide the

sharp cuts necessary for exact grossing

01 pc (for ESI Hospital , Manicktala)

4,000.00


techniques. Tissue tampers for allowing a firm hold on

specimens while making horizontal cuts. 2-4 grossing forks designed to hold specimens

including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.

Dust cover Dictating unit with microphone UPS 1.0 KVA Integrated imaging system Infrared control.

9 GROSSING STATION

Item: : Histopathological Grossing table / Grossing Station elevated floor model with Electrical and mechanical controls with UPS 1.0 KVA . Details: 1. Cutting board with black viewing surface, to accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness. 2. Connecting tubes for water supply and drainage.

3. Sprinkler system for easy cleaning of the working

area.

4. Specimen safe drain system.

5. Fine grating S.S. sink.

6. Electronic scale upto 2000g at least.

7. Integrated S.S. rulers in cm / mm scale on the standard and large boards. 8. Light tubes and adjustable spot lights.

9. Filtration system to suck-off polluted air, with easily Replaceable filter, alum oxide. 10. Magnifying Glass with long handle (flexible).

01 pc (for ESI Hospital , Joka)

4000.00


11. Separate metal table for grossing with drawers.

12. Formalin Container.

13. Dictating Unit with microphone and controlling unit & foot switch Essential Accessories must be supplied with the

main consignment

Trimming knives and scalpel blades to provide the sharp cuts necessary for exact grossing techniques.

Tissue tampers for allowing a firm hold on specimens while making horizontal cuts.

2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form and integrity.

Protective Dust Cover UPS 1.0 KVA Capacity

10 LABORATORY MICROWAVE PROCESSOR SYSTEM FOR ENZYME RETRIEVAL

Nomenclature: Laboratory Microwave Processor System for Enzyme Retrieval Table- top Model 20 to 30 Litre capacity. Description: Table-top model, capacity 20-30 Litre, convection mode, S.S. body, preferably ceramic enamel inner wall, programmable digital temperature controller and display within a range of 40°C to 108°C, built-in temperature probe, automatically controlled programmable timer setting and digital display, wattage level 800 - 1000 watt : MW leakage proof design, overheating prevented design, audible alarm with user adjustable time delays, throughput of 80 – 100 slides per run, dewaxing, rehydration and antigen retrieval in approximately 30


3000.00


minutes,IEC/CE/ISO Certified model. Essential Accessories :

1. Compatible Plastic Rack for holding slides: 5 (five) numbers

2. MW compatible specimen containers assorted sizes: 5 (five) numbers

3. U.P.S. 1 KVA: 1 (one)Number 4. Operator’s Guide

11 pH METER DIGITAL

Nomenclature : pH Meter digital pen type. ( Minor variation of quoted specification may be accepted within a short range as available in the market nearest to the requirement of the consignor) Principle: Microprocessor controlled pen type equipment.

pH range: 0 – 14 pH Units.

mV range: 0 to ± 1999 mV.

Resolution: 0.01 pH; 1 mV. Accuracy: ±0.01 pH ± 1 digit; ± mV ± 1 digit Operating temperature: 10˚C to 50˚C.

05 pcs (04 pcs for ESI Hospital , Joka & 01 pcs for ESI Hospital Manicktala)

5000.00


Operating Panel & Display: Panel for different functions with digital LED Display.

12 AUTOMATIC

PRECISION MICROBALANC

E

Nomenclature: Electronic precision weighing balance 150g (approx) with display and UPS. (Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Description : Electronic precision microbalance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Power cord Indian type. Capacity: Maximum capacity : Approx. 150 g Readability : 0.01 g Repeatability : 0.01 g Linearity : ± 0.02 g ( at ambient temperature) Essential Accessories must be supplied with the main consignment & committed in the bid 1. Calibration weight. 2. Protective cover.

02 pcs (01 pc for ESI Hospital , Joka & 01 pc for ESI Hospital Manicktala)

10,000.00


13 Hot plates electric with digital temperature controller, temperature range upto 300°C, heat-proof powder coated cast iron top, spiral heaters, thermostatic heat control

2 pcs (For ESI-

PGIMSR, JOKA) 4000

14 Electric Vacuum Embedding Bath

______________________ 1 pc (For ESI-

PGIMSR, JOKA) 10,000

15 Distilled Water Still

(Deionizer), removal of inorganic and organic ions, dissolved particles, microorganisms, etc., with vacuum system, analytical grade water purification & electro-deionization system, multi-stage (prefiltration, particle clearing, reverse osmosis, electro-deionization and ultra-violet purification) with display and self performance check, connectivity to data management system/ PC with printer for traceability of water quality

1 pc (For ESI-

PGIMSR, JOKA) 20000

16 Band Saw all S.S. 8 cm with rounded ends electric

Maximum job height 200mm, maximum throat 200mm, approx table dimension 600x600mm, blade size approx 3500x30x1.0 mm(thickness), blade speed 20 to 100 m per min, with saw and coolant motor

2 pc (For ESI-

PGIMSR, JOKA) 1000

17 Staining Racks S.S. horizontal with handle cradle type for 10 slides/ 20 slides

20 pc (For ESI-

PGIMSR, JOKA) 100

18 Precision Chemical Balance

Precision Chemical Balance with assorted precision brass weights 1mg to 200g,

2 pc, (For ESI-

PGIMSR, JOKA) 1000

19 Laboratory Counter Laboratory Counter Clay-Adams 9 keys spring loaded, including eight individual counting keys and one totalizer heavy duty metallic body, good visibility of rotating digits, digit range 0 to 100 for each, audible alarm at 100 count in total,. Options for counting of cell, simple computation and percentage counting.

6 pcs (For ESI-

PGIMSR, JOKA) 50


Individual key counting limit of 999 cells. Bilateral sturdy resetting knobs.

20 Automatic Timer Clock Digital

Automatic Timer Clock Digital with Split and Lap timer, range upto 3 hours

6 pc(For ESI-

PGIMSR, JOKA) 100

21 Bone Saw 8 inches blade rounded point

Bone Saw 8 inches blade rounded point, high carbon steel blade to withstand 70°C temperature of friction, sharp cutting edges of teeth, ergonomic handle design

2 pc (For ESI-

PGIMSR, JOKA) 50

22 Drill for boring glass

______________ 2 pcs (For ESI-

PGIMSR, JOKA) 100

23 Blow piece with bellow for bending glass

_____________ 2 pcs(For ESI-

PGIMSR, JOKA) 50

24 Sternal Puncture

Needle Sternal Puncture Needle (Klima and Salah type)Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size:15G, 1 7/8inches Adult size

6 each (For

ESI-PGIMSR,

JOKA)

100

25 Sternal Puncture

Needle Sternal Puncture Needle(Klima and Salah type) Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size: 18G, 1 ½ inches Child size

6 each (For

ESI-PGIMSR,

JOKA)

100

26 Liver Biopsy Needle Trucut needle s.s.

_____________ 6 pcs (For ESI-

PGIMSR, JOKA) 100

27 Box weight analytical

______________ 1pc (For ESI-

PGIMSR, JOKA) 50


28 Stop watch digital with LED/LCD display reading at 1/5 display

_____________

6 pc (For ESI-

PGIMSR, JOKA) 100

29 Ultra-violet lamp table top model

_____________ 1 pc (For ESI-

PGIMSR, JOKA) 2000

30 Surgical Instruments assorted

Surgical Instruments assorted

Autopsy knife blade 100mm with handle



Dissecting scalpel blade curved tip with handle

Dissecting scalpel blade pointed tip with handle

Forceps Artery 7.5 inch

Forceps Cartilage Curved 5 inches

Forceps Cartilage Straight 5 inches

Forceps dissecting plain serrated jaws broad tip 5.5.inches


Forceps dissecting plain serrated jaws Fine tip 5.5.inches

2 sets (For ESI-

PGIMSR, JOKA) 4000


Forceps Iris

Forceps Sinus

Forceps Specimen

Forceps Tissue 5 inches


Knife Professional 250x20mm

Knife Senior 225x25mm

Mallet S.S.

Needle Teasing S.S.

Probe Curved end S.S.

Probe Straight S.S.

Scissors Angle Fine Pointed Dissecting 4.5 inches

Scissors Fine Pointed Curved 5.5 inches

Scissors Fine Pointed Straight 4.5 inches

Scissors Mayo Dissecting Curved 5.5 inches

Scissors Mayo Dissecting Straight 5.5 inches

Scissors Mayo Dissecting Straight 9 inches

Scissors Surgical Curved blunt/sharp point5.5 inches

Scissors Surgical Straight blunt/blunt

Scissors Surgical Straight sharp/sharp


Speculum Nasal

Sponge Holder

Surgical blade holder 6 inches

Trimming knife blade 130mm with handle


31 Dark Room Lamp __________________ 1pc (For ESI-

PGIMSR, JOKA) 50

32 Deep Pan S.S. __________________ 5 pc (For ESI-

PGIMSR, JOKA) 50

33 Paraffin Pouring Pitcher with long spout and heat resistant handle S.S.

__________________ 2 pcs (For ESI-

PGIMSR, JOKA) 50

34 Sampling scoop S.S.

__________________ 2 pcs (For ESI-

PGIMSR, JOKA) 50

35 Sampling spatula S.S. 6 inches

__________________ 2 pcs (For ESI-

PGIMSR, JOKA) 50


__________________ 2 pcs (For ESI-

PGIMSR, JOKA) 50


37 Funnel S.S. dia 10mm/4 inches

__________________ 5 pcs (For ESI-

PGIMSR, JOKA) 50


__________________ 5 pcs (For ESI-

PGIMSR, JOKA) 50

39 Microtome Knife Carbon steel Profile C 120 mm

__________________ 2 pcs(For ESI-

PGIMSR, JOKA) 50

40 Microtome Knife Holder with handle

__________________ 2 pcs (For ESI-

PGIMSR, JOKA) 50

41 Belgian Hone Best quality

__________________ 1 pc (For ESI-

PGIMSR, JOKA) 50

42 Leather Strop superfine quality double sided

__________________ 1 pc (For ESI-

PGIMSR, JOKA) 50

43 Knife Sharpener automatic

__________________ 1pc (For ESI-

PGIMSR, JOKA) 5,000

44 Post-mortem set



Autopsy knife

__________________ 2 sets (For ESI-

PGIMSR, JOKA) 4,000


blade 325mm with handle

Calipers

Curettes

Cuscoe’s speculum

Dilators

Enterotomes and viscerotomes







Forceps Iris


Forceps Sinus

Forceps Specimen

Irrigation device

Kidney tray 8 inches

Knife Brain

Knife Cartilage

Knife Professional

Knife Resection

Metallic ruler tape flexible

Nasal speculum

Needle holders

Retractors

Rib shears

Scalpels assorted sizes


Scissors Dissecting

Scissors Fine


Pointed Curved 5.5 inches


Scissors Iris




Scissors Metzenbaum




Sternal Saw


Stryker Skull Saw

Surgical staplerwith reloadable staple cartridges

Tenaculum

Towel forceps

Tray 12 x 12 inches

Tray 12 x 18 inches

Trocars

45 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Adult type, 11G, Stainless steel instrument tray with lid 8 inches x 8 inches

__________________ 2 pcs(For ESI-

PGIMSR, JOKA) 50

46 Bone marrow Biopsy Needle Jamshidi Type Heavy duty

__________________ 2 pcs (For ESI-

PGIMSR, JOKA) 50


stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Pediatric type, 13G, Stainless steel instrument tray with lid 8 inches x 8 inches

47 Test tube rack HDPE 30positions

__________________ 5 pcs(For ESI-PGIMSR, JOKA)

100

48 Bone decalcifier electric

__________________ 1 pc (For ESI-PGIMSR, JOKA)

4000

49 Class II Biosafety

Laminar

Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45

1 pc (for ESI

PGIMSR

Manicktala)

2000


Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system

50 Homogenizer with

two probes

Homogenizer with two probes

Small dispersing instrument for volumes from 0.1-100 ml Quick-connect coupling for probes Stainless steel probes Option of using with plastic disposable dispersing elements • High performance drive Probe for volume Range (H20): 0.1 to 10 mL, 1-100 ml Speed Range: 8000 to 30,000rpm Maximum Viscosity (cps): 20000 Preferably built-speed control Use Options: Handheld or stand-mounted Motor: 125w Noise Level: 65dB or less Overload Protection: Yes

1 pc (for ESI

PGIMSR

Manicktala)

10,000


Should be supplied with all the accessories like Stand, boss clamp, clamp etc


SL. NO.





EMD VALUE

QUOTED (YES/NO)

CLINICAL LABORATORY (For ESI-PGIMSR, JOKA)

51 Sedimentation apparatus Westergren with

Sedimentation apparatus Westergren with

1. metallic rack with spring-loaded pipette holder and round base with rubber cushion, provided with spirit level 5 station

2. Glass Westergren pipettes, class A glass with precision etched and printed marks and ground lower end and smooth rounded top end : 5 (Five) tubes

3. Pipette filler for Westergren tube : 1 (One) No.

12 sets(For

ESI-PGIMSR,

JOKA)

1000

52 Sedimentation apparatus Wintrobe

Sedimentation apparatus Wintrobe with

1. metallic rack with screw adjusted pipette holder and round base with rubber cushion 5 station

2. Glass Wintrobe’s tubes, class A glass with precision etched and printed marks in mm in both ascending and descending order, polished and rounded opening : 5 (Five) tubes

3. Glass Landau’s tubes, class A glass with bulb and precision etched and printed marks at 0 to 50 mm : 5 (Five) tubes

4. Filling pipette with long stem and rubber teat : 5(Five) No.s

5 sets(For ESI-

PGIMSR, JOKA) 100

53 Urinometer precision glass with

___________________ 20(For ESI-

PGIMSR, JOKA) 500


mercury bulb and graduated stem with temperature mark

54 Albuminometer Esbach’s Corning glass with precision marking with corrosion-resistant rubber stopper in wooden/polymer case

_________________ 20(For ESI-

PGIMSR, JOKA) 500

55 Crucible with pestle chinaware tough quality

_________________ 2(For ESI-

PGIMSR, JOKA) 50

56 Crucible Gooch with adaptor

_________________ 2(For ESI-

PGIMSR, JOKA) 50

57 Balance sensitive electronic precision weighing balance 2000g (approx) with display and UPS.

Electronic precision balance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and

_________________ 2(For ESI-

PGIMSR, JOKA) 2000


control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Maximum capacity: Approx. 12000g Readability : 0.1g Repeatability : 0.1g Linearity : ± 0.3g (at ambient temperature) Essential Accessories 1. UPS of capacity 0.5 KVA. 2. Power cord Indian type. 3. Extension cable


5m. 4. Calibration weight. 5. Protective cover.

58 Balance chemical with fractional weights.

Balance chemical with fractional weights.

Conventional chemical balance , corrosion and rust prevented metallic body resistant to expansion on heat; corrosion prevented balance pivot wedges; rust and corrosive-chemical resistant stainless steel double weighing pans; zeroing mechanism; side opening glass cabinet with base screws.

Weight box holding calibrated brass fractional weights resistant to rust and sulfation; provided with forceps.

Weight range 1 mg to 200 g.

2(For ESI-

PGIMSR, JOKA) 5000

59 Test tube rack HDPE 10 positions

60(For ESI-

PGIMSR, JOKA) 100

60 Spectrophotometer

Spectrophotometer

Analysis Option: a. Absorbance

b. 1 point end linear & non linear.

c. 2 point end linear & non

1(For ESI-

PGIMSR, JOKA) 5000


linear.

d. Rate linear & non linear.

e. Immunoturbidimetry.

Light Sources: Pre aligned Quartz halogen lamp.

Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice.

Measurement Time : Selectable.

Cuvette a. Flow cell Cuvette.

b. External rectangular Cuvette.

Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C.

Aspiration System: Motor driven pump.

Aspiration Volume Programmable.

Cuvette Blanking: Automatic.

Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system,

selection through keyboard.

Calibration: Automatic against standard /


calibration.

Quality control: a. 2 levels of control (at least)

b. Levey - Jennings diagram.

c. Manual entry of QC

Memory Storage: a. Minimum 200 patients result.

b. Calibration result.

c. Quality control result for 01 month.

Display:

a. Graphic LCD.

b. Display of reaction curve, absorbance, temperature.

c. Display of result of real time.

d. Graphical display of reaction time.

e. Calibration curve graphical display.

Key board:

a. Chemical and moisture prevented single touch alphanumeric membrane key panel.

Printer:


a. Built in thermal printer with full graphic facility.

b. Parallel full page ink printer with formatting options.

Reporting format: a. Conventional

b.SI unit(Optional/Interconvertible).

Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength.

Automatic Flagging: a. Absorbance and linearity cheek.

b. Reagent stability.

c. Substrate depletion.

Peripheral interfacing: a. Parallel ports for external printer , keyboard and PC. Software PC Compatible.

Power Cord Indian Type 3-pin power cord locally available and replaceable .

Dust Cover Washable dust-covers for main unit and key-board, etc.

Working Manual Working Manual in original

61 Lumbar puncture needle s.s.

____________________ 12(For ESI-

PGIMSR, JOKA) 50


62 VOLUME DISPENSER

Nomenclature:Volume Dispenser Automatic. Type : Inert amber colored glass bottle reservoir with bottle top Ball-valve polymer pump graduated for variable volume adjustments, autoclavable, corrosion resistant . Capacity: Reservoir capacity 1000 ml.

Bottle top dispenser pump capacity 0 – 5.0 ml. with increments of 0.1 ml

01 pc (For ESI-PGIMSR, JOKA)

3000.00


SL. NO.





EMD VALUE

QUOTED (YES/NO)

Department of BLOOD BANK (For ESIC HOSPITAL, JOKA)

1 ULTRA LOW TEMPERATURE LAB DEEP FREEZER

ULTRA LOW TEMPERATURE LAB DEEP FREEZER Nomenclature : Laboratory deep freezer floor model electrically operated, capacity of approx 550 L- 600 L ( Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Principle: Electrically operated vertical floor model with ultra cooling device, stainless steel interior, 4-5 replaceable storage compartment with stainless steel racks, temperature selector and Temperature Controller, eye- level display and temperature recorder, gasket sealing system to avoid ice formation, calibration mode should be built-in with the system and lock system in door. Temp. range: Selectable range from -400 C to - 80˚C.

Operating Panel & Display: Button/ switch panel for different functions and programmes,viz, start, stop, temperature control, temperature and time setting with

01 pc

25000.00


LED Display. Battery backup for alarm & display. Display of set and actual running values. Alarm: Acoustic Signal for over or under-temperature, improper locking of door(optional), or error. Essential Accessories must be supplied with the main consignment & committed in the bid 1. Thermometer. 2. UPS 2.0 KVA. 3. Power cord Indian type. 4. Storage boxes.

2 Automated Immunohematol

ogy detection system

Specification Automated Immunohematology detection

system by Gel Card Technology. 1. Semi-automated immunohematology analyzer

incorporated with centrifugation, reading and interpretation abilities for the tests performs by the column agglutination technology for transfusion related cross matching on anti human globulin and enzyme phase (to detect both IgG & IgM antibodies), blood grouping, partial Rh-D typing, antibody screening &identification in a single step.

2. The following range of investigations must be provided in the system.

i. ABO Blood grouping with partial D screening.

ii. Weak anti D test with ICT method.

iii. Antibody screening and identification.

iv. Single antigen test cards and antisera for Rh-C/c, E/e, Cw, Kell, Fya, Fyb, Jka, Jkb, Lewisa Lewisb,

01 pc 20000.00


Lutherana, Lutheranb, MNS, etc.

v. Special gel cards for antihuman globulin test positive IgG, IgM, IgA, C3d, C3c etc.

vi. Provision for acid elution method.

vii. Special blood grouping cards for donor and recipient for DVI variant.

viii. Syphilis antibody detection.

Detail procedure for all compatible methodologies mention as above must be provided. 3. Automated card reading and report generation with

bar code security.

4. Expression of results in grades of agglutination.

5. Capacity for 20 – 24 gel cards with ‘V’ bottom tubes in single run.

6. Peltier heating of incubator with programmable controls for 15 minutes and digital display of temperature.

7. Centrifugation force with 80 – 84G.

8. Clear transparent top for centrifuge and incubator with rust and corrosion resistant body.

9. The system must be devoid of any wash phase.

10. Incorporated capabilities for validation storage and reproduction of results.

11. Parallel computer connection with bidirectional portability and appropriate software to be provided along with the equipment.


12. Compatible printer for printing of different data and customized report to be provided along with the equipment.

13. A quality control system must be incorporated in the equipment for all the lab.

14.

i. Provision for 2 and 3 red cell panel for antibody screening, 11 cell panel for antibody identification and pooled ‘O’ cell with known phenotype for donor screening as per NACO Guidelines.

ii. Provision for NaCl/Enzyme and cold agglutinins cards, modified bromelin solution, papain, cell stab, cell thaw and cell freeze reagent.

15. CE/ISI compliance of the system.


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT. OF SURGERY ESI-PGIMSR, JOKA

1 OPERATING HAND

INSTRUMENTS OPERATING HAND INSTRUMENTS Set for LAPROSCOPIC SURGERY

01 set 10000.00

1 Trocar /Cannula Size 11 mm

3

Trocar with pyramidal tip ,multi function automatic valve,

stopcock for insufflation

2 Trocar/Cannula Size 5.5mm

3



3 Maryland Dissecting forceps, 5mm, working length 33cm

1

Rotating, Dismantable with channel for cleaning & connector

pin for unipolar coagulation. Insulated Metal Handle without

ratchet & Milled Radel shaft insulation. Easy to change insert.

4 Curved Kelly Dissecting forceps, 5mm, working length 33cm

1





5 Right Angle Dissecting forceps, 5mm, working length 33cm

1




6 Babcock Grasping forceps 5mm, working length 33cm

1

5mm, Rotating, Dismantable with channel for cleaning

Non insulated handle with ratcheting mechanism, easy to change insert

7 Alligator Light Grasping forceps,5mm, working length 33cm

1

5mm, Rotating, Dismantable with channel for cleaning & connector

pin for unipolar coagulation. Insulated Metal Handle with ratchet

& Milled Radel shaft insulation. Easy to change insert.

8 Fundus Grasper , 5mm, working length 33cm

2


Metal Handle with ratchet & Milled Radel shaft insulation.

Easy to change insert.

9 Tooth Grasper / Allis, 5mm, working length 33cm, with double row of teeth

1

Rotating, Dismantable with channel for cleaning




10 Endo Grasper , 5mm, working length 33cm

1


Metal Handle with ratchet and non-ratchet & Milled Radel shaft insulation.


11 Double Action Claw , 5mm, working length 33cm

1


Insulated Metal Handle with ratchet and non ratchet facility &

Milled Radel shaft insulation. Easy to change insert.

12 Metzenbaum Scissor, 5mm, working length 33cm

1


pin for unipolar coagulation. Insulated Metal Handle without ratchet


13 Straight Metzenbaum Scissor, 5mm, working length 33cm

1




14 Hook Scissor, 5mm, working length 33cm

1





15 Dissecting Electrode (L shaped) , 5mm, working length 33cm

1

5mm instrument with proper insulation upto working tip

16 Dissecting Electrode (Spatula) , 5mm, working length 33cm

1


17 Clip Applicator 10 mm dia for Ethicon LT-300

1

10mm, Rotating, with channel for cleaning

Metal Handle without ratchet .

18 Suction / Irrigation cannulas. Trumpet valve.

1

5mm all metal & single hand control trumpet with perforations at

distal tip for smooth function.

19 Reducer 10 / 5 mm for reducing 10 mm to 5mm dia.

1

20 Aspiration Needle, 5mm

1

21 Gall Bladder Extractor

1



22 Monopolar Cable

1


23 5mm Bipolar Fenestrated Forceps with Ring Handle and cable

1

24 Reusuable bipolar cable

1

25 5mm Straight tip needle holder with metal handle and ratcheting

1

mechanism, can be dismantled, with channel for cleaning.


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPT OF DERMATOLOGY ESI PGIMSR, JOKA KOLKATA

1 Radiofrequency machine

Radiofrequency machine Number of items: 2 Power required: 230v/50 hz Dimensions 260x300x150 Weight 7kg Electrodes insulated Frequency 0.20-2.93 Mhz Cut: 70%cut, 30% coagulation Coagulation : 60%coagulation, 40% cut Fulguration: available intensity control: Linear

02 pcs

2000.00

2 Centrifuge machine

Centrifuge machine Number of items- 2 Capacity in ml: 24x5 Type of head: Angle No. of tubes: 24 Maximum speed: 3500 rpm Maximum RCF: 1250 W×D×M (MM) : 210×210×250 Supply: 221-240v, 50Hz, single phase

02 pcs

500.00

3 Binocular microscope

Binocular microscope Optical system: UIS2 (UNIVERSAL INFINITY CORRECTED) CE certified Antifungal treated optical lens

02 pcs

6000.00


Illumination: built in transmitted Koeheler illuminator, 6v/30W halogen bulb 100-120V/220-240V ̴ 0.85/0.45A , 50/60 Hz Focussing: Stage height movement by roller guide (rock & pinion), stroke/rotation=36.8mm Full stroke range: 25mm Revolving nose piece: Fixed, quadruple nose piece with inward tilt Binocular observation: field no. 20, tube inclination:30 degree, interpupillary distance adjustment range: 48mm-75mm Stage: size-188mm x 134mm, movement range: 76mm (X direction) x 50mm (Ydirection) Specimen holder: double size holder Rubber grip: equipped as standard Condenser: type- Abbe condenser, NA: 1.25 with oil immersion, aperture in diaphragm: built in Dimensions & weight: 233mm (W) X 411mm (H) X 367.5 mm (D), 8KG

DEPT OF ENT ESI PGIMSR, JOKA KOLKATA

1 Surgical Operating Microscope

Specification of Surgical Operating Microscope Surgical operating microscope for micro ear surgery and micro laryngeal surgery with the following associated features;

1. Integrated HD monitor to display surgical steps to

students.

2. Integrated HD video recording system with HD camera

system.

3. Integrated HD still photography enabling system with

camera attachment facility.

4. Data storage, transmission and documentation facility

with appropriate software.

5. Stereo co-observation tube for assistant surgeons and

01 set

50000.00


students.

6. Lens for ear and laryngeal surgery (400, 200)

7. Lens covers and microscope covers for sterility

purposes

8. Microscope stand and wheels.

2 Rigid Oesophagoscope set Adult

Specification for Rigid Oesophagoscope set Adult: 1. 0 degree telescope diameter 5.5mm, length 53 cm, autoclavable with incorporated fibre optic light transmission 2. Telescope guide for use with 50cm esophagoscope 3. fibre optic light carrier for use with 50cm esophagoscope 4.Rigid oval esophagoscope, outer diameter 12 X 16 mm, length 50 cm 5. Rigid oval esophagoscope, outer diameter 10X14 mm, length, 50 cm 6. Prismatic light deflector, autoclavable with fibre optic light cable connection 7. fibre optic light carrier for use with 30cm esophagoscope 8. Rigid oval esophagoscope, outer diameter 12.2X 16.2 mm, length 30 cm 9. Rigid oval esophagoscope, outer diameter 10.2 X14.2 mm, length 30 cm 10. Rigid oval esophagoscope, outer diameter 8.6X 12.1 mm, length 30 cm 11. Fibre optic light carrier for use with 20 cm hypopharyngoscope 12. Rigid Oval Hypopharyngoscope, outer diameter 10X14 mm. length 20 cm 13. handle for Esophagoscopes 14. Adjustable magnifier autoclavable(swivel action) 15. Cotton carrier(55cm) 16. Rigid suction tube with rubber tip, straight, working length 55cm 17.spring handle sponge holder, working length 55cm

01 set

10000.00


18. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 2.5mm,working length 55cm 19. biopsy forceps and foreign bodies, working length 55cm 20. cupped forceps for biopsies, working length 55cm 21. Peanut removal forceps ,working length 55cm 22. Cotton applicator, working length 30cm 23. Straight suction tube with rubber tip, working length 35cm 24. Spring handle sponge holder, working length 35cm 25. Alligator forceps, sheath diameter 2mm,working length 35cm 26. Peanut forceps, working length 35cm 27. Cupped forceps for biopsy ,working length 35cm 28. Universal forceps for biopsy and foreign bodies ,working length 35cm

3 Rigid oesophagoscopy set , Paediatric

Specification for rigid oesophagoscopy set , Paediatric 1, Oesophagoscope tube, size 6,length 30 cm 2. Oesophagoscope tube, size 5, length 30 cm 3. Oesophagoscope tube, size 4, length 30 cm 4. Oesophagoscope tube, size 3.5, length 18.5 cm 5. Oesophagoscope tube, size 3, length 18.5 cm 6. Prismatic light deflector ,autoclavable with connection for fibreoptic light cable 7. Rubber telescope guide 8. Adjustable magnifier (swivel action) autoclavable 9. 0 degree telescope, diameter 2.9 mm, autoclavable, fibreoptic light transmission incorporated 10. Optical forceps,2x2 tip, with spring action handle for use with telescope (for coins and flat foreign body) to be used with 30 cm oesphagoscope 11. Optical forceps with spring action handle for use with telescope (for peanuts and soft foreign body) to be used with 30 cm oesphagoscope 12. Optical forceps with spring action handle for hard foreign bodies to be used with 30 cm oesphagoscope 13. Peanut removal forceps with double action jaws, sheath diameter 1.5mm,working length 35cm 14. Biopsy and foreign body forceps, double action jaws, sheath

01 set

10000.00


diameter 1,5mm, working length 35cm 15. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 1.5mm, working length 35cm 16. Cupped forceps for biopsy, double action jaws, sheath diameter 1.5mm, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Straight cotton applicator working length 35cm - 3 such

4 Rigid bronchoscopy set, adult

Rigid bronchoscopy set, adult 1. 30 degree telescope, diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 2. 90 degree telescope diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 3. Rigid bronchoscope, size 8.5, length 43cm 4. Rigid bronchoscope, size 7.5, length 43cm 5. Rigid bronchoscope, size 6.5, length 43cm 6. Deflecting device for bronchoscopes and telescopes 7. FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 8. Adapters to respirator - 2 such 9. Rubber telescope guides - 2 such 10. Glass window plug - 2 such 11. Instrument guides for suction catheter - 2 such 12. Injection canula for positive pressure assisted ventilation, LUER lock, outer diameter 3.5 mm for use with bronchoscopes 13. Optical forceps, alligator, large jaws for hard foreign bodies 14. Optical biopsy forceps, circular cup, 4.3mm 15. Flexible forceps for biopsy 16. Alligator forceps for hard foreign bodies, double action jaws, diameter 2.5mm, working length 50cm 17. Peanut removal forceps, double action jaws, sheath diameter 2.5mm, working length 50 cm 18. Cupped forceps for biopsy, double action jaws ,sheath diameter 2.5mm, working length 50 cm 19. Cotton carrier, working length 50cm - 6 such 20. Sponge holder with spring handle, working length 50cm 21. Cytology brush with ring handle, working length 55cm 22. Coagulation suction tube, insulated, working length 50 cm

01 set

10000.00


accompanied by unipolar high frequency cord with 5mm plug, length 300cm 23. Straight suction tube with rubber tip, working length 50cm - 2 such 24. Curved suction tube with rubber tip, working length 50 cm 25. Suction tubes 4mm diameter, length 50 cm - 2 such 26. Aspirator, can be connected to suction tubes or suction catheter 27. Spare glass for aspirator 28. HUZLY Aspirator and bronchial irrigator 29. Laryngeal syringe, 5ccm, LUER lock, with canula 30. Bronchial atomizer, with graduated container and rubber bulb, length 50cm 31. Laryngeal atomizer with bulb, length 50 cm 32. Suction catheter, 7 Fr with connector 33. Suction catheter, 5 Fr with connector

5 Rigid bronchoscopy set, Paediatric

Rigid bronchoscopy set, Paediatric 1. Bronchoscope size 6, length 30cm 2. Bronchoscope size 4.5, length 30cm 3. Bronchoscope size 3.7, length 30cm 4. Bronchoscope size 3.5, length 26cm 5. Bronchoscope size 3, length 26cm 6. . FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 7. Adapters to respirator - 2 such 8. Rubber telescope guides - 2 such 9. Glass window plug - 2 such 10. Instrument guides for suction catheter, short, for children and infants - 2 such 11. Injection canula , only, LUER lock, outer diameter 3.5 mm for use with bronchoscopes - 2 such 12. Prismatic light deflector, autoclavable with connection for fibreoptic light cable 13. Cotton applicator, working length 35cm - 3 such 14. Sponge holder with spring handle, working length 35cm 15. Foreign body basket with ring handle, working length 35cm 16. Cytology brush with ring handle, working length 35cm

01 set

10000.00


17. Straight suction tube with rubber tip, working length 35cm 18. Curved suction tube with rubber tip, working length 35cm 19. Suction tube, 3mm, working length 35cm, curved 20. Bronchial atomizer, graduated container and rubber bulb, working length 40 cm 21. Graduated containers - 2 such 22. Aspirator with spare glass and cut off hole, can be connected to suction tube or catheter

6 AUDIOMETER

AUDIOMETER REQUIREMENT The audiometer should have the following specifications: *It should be a Clinical PC-based audiometer. *The manufacturer should provide instructions and provision for calibrating the instrument. *The following tests should be able to be performed by the audiometer:

Pure tone audiometry, Speech audiometry ( Including

Speech reception threshold and speech discrimination

score), SISI, ABLB, AUTO THRESHOLD , TONE DECAY

*It should have the following provisions: SMPS

Switch Mode Power Supply capable of withstanding

extreme

voltage fluctuations (115 V to 270 V)

INPUT: Tone, Speech, Tape, Pulse Tone.

OUTPUT: Left, Right, Bone, L + R. F/F Left, F/F Right, F/F

L+R.

HEADPHONES: TDH-39/TDH-49.

BONE: B-71 BONE CONDUCTOR.

Air : 120 dB Max, 125 Hz to 12 kHz., -20 dB Min.

01 set

10000.00


Bone : 80 dB Max, 250 Hz to 6 kHz., -20dB Min.

Noise : Wide Band, Narrow Band, Speech Band.

Built-in Mike, Ext. Mike, Mike Sensitivity Control.

Interrupt Lock.

Printer Facility-Sequential Merged Graphs.

Memory Review.

Computer Interface.

Storage of the patient data in the hard disc for future

reference.

Connectivity to an external USB Printer to print the

reports.

7 IMPEDENCE AUDIOMETER

IMPEDENCE AUDIOMETER

It should meet the international standards

Should be able to test the following

1. Tympanometry

2. Acoustic reflex test

Should have facility for producing printed report

Should have facility for data storage

01 set

10000.00

8 TYMPANOMASTOID SET

SURGICAL INSTRUMENTS TYMPANOMASTOID SET

1. SHEA aural speculum – set of 4, black finish – 3 sets

2. Tumarkin tapered slotted aural speculum – set of 4 – 3

01 set

2000.00


set

3. Adsonforcep – plain – S.Steel – 6 such

4. Adsonforcep – 1x2 teeth – S.Steel – 6such

5. Hartmann aural forcep – 3 such

6. Lempert endaural speculum – right – 3 such

7. Mollison self retaining mastoid retractor 3 such

8. Plester self retaining retractor 2x2 prong – 3 such

9. Plester self retaining retractor 3x3 prong – 3such

10. Plester self retaining retractor – right solid blade – 3

such

11. Plester self retaining retractor – left solid blade – 3such

12. Farabeuf periosteum elevator – straight – 3 such

13. Freer’selevator double ended – 3 such

14. Howarth elevator – 3such

15. Zollner suction tube with 4 microtips – 3 such

16. Verhoeven suction tubes – no. 12,14,16,18,20,22,24 – 3

sets

17. Verhoeven suction tube adaptor – 3 such

18. Micro aural crocodile serrated – fine straight – 3 such

19. Micro aural cup – straight – 3 such

20. Micro aural cup – upward – 3 such


21. Micro aural scissors – straight – 3 such

22. House dieter malleus nipper – up – 3such

23. House dieter malleus nipper – down – 3 such

24. Caw Thorne hook – micro pick 90 degree angled – 3

such


such

26. Wullstein needle – very slight curved – 3 such

27. Wullstein needle – slight curved – 3 such

28. Wullstein needle – straight – 3such

29. Rosen curette curved straight shaft – 3uch

30. Sickle knife – 3 such

31. BealesRaspatory – 3 such

32. Circular cutting knife 60 degree – 3 such

33. Ball probe – 3such

34. Rosen elevator for lifting drum – 3such

35. Plester first incision knife – 3 such

36. Curved circular cutting knife – 3 such

37. House curette double ended – 3 such

38. House curette double ended slightly curved – 3 such

39. Myringotomy knife – 3such


40. Small curved scissor – 3 such

41. Mastoid micromotor drill (30000 rpm) 1

42. Straight hand piece for mastoid drill 1

43. Contra angle hand piece for mastoid drill 1

44. SS cutting burrs ( 8mm,6mm,4mm,2mm,1mm0.8mm) 1

each

45. Diamond polishing burrs (6mm, 4mm, 2mm 1mm) 1

each

9 STAPEDECTOMY SET

STAPEDECTOMY SET Each instrument one number required

Round Knife 45° diameter 1 mm, length 16 cm

Flag knife

Micro elevator

Sickle Knife, double-edged, standard model, slightly

curved, length 16 cm

Pick 90°, 16 cm, 0.6 mm

Pick 90°, 16 cm, 0.8 mm

Ear Forceps extra delicate, serrated, 0.4 x 3.5 mm,

working length 8 cm

Ear Forceps extra delicate, pointed, serrated, 1 x 4.5

mm, working length 8 cm

Scissors delicate standard model, blade length 8 mm,

01 set

50000.00


working length 8 cm

Malleus Nipper, extra delicate, upbiting, width 0.8


Ear Forceps extra delicate, oval cupped jaws, 0.6




Perforator, 16 cm,diameter: 0.4 mm.


Perforator, length 16 cm, diameter 0.8 mm

Footplate burr

Measuring Rod, length 16 cm, Marker pins at 3 mm,

4 mm, 5 mm

Holding Forceps, for holding Stapes and Total

Prostheses, length 13.5 cm

Crimping Forceps for Total Prosthesis, length 10.5 cm

Scissors, for Total Prostheses, length 11 cm

Micro Hook, 2.5 mm, 45°, length 16 cm

Diamond Straight Shaft Burr, length 7 cm, Diameter

1.4 mm

Needle. 16.5 cm, light curve.

Seeker, ball end angled 45°, 15.5 cm, size 3.


Suction Cannula, angular, LUER- Lock, working length

6 cm, O.D. 0.7 mm- 2 in number

Suction Cannula, angular, LUER Lock, working length

6 cm, O.D.: 1.0 mm- 2 in number


6 cm, 1.3 mm- 2 in number





Adaptor, for suction cannulas- 2 in number

Curette, large, spoon sizes 2 x 3.2 mm and 1.6 x 2.6

mm, length 15 cm

Curette, small, spoon sizes 1 x 1.6 mm and 1.3 x 2 mm, length 15

10 ADENO-TONSILLECTOMY

ADENO-TONSILLECTOMY 1.BoyleDevis mouth gag- 1 (with full set of tongue blades) 2.Draffin Bipod- 2such 3.Magauran plate-1such 4. Tonsil holding forcep-1such 5. Tonsillar knife with dissector - 1such 6.Mollison’s blunt tonsillar dissector and anterior pillar retractor-1such 7.Serrated tonsillar dissector and anterior pillar retractor- 1such 8.Long straight tonsil hemostatic forceps- 1such 9. Naegus artery replacement forcep- 1such 10.Naegus ligature slipper and knot tier- 1such 11. Eve’s tonsillar snare- 1such 12. Long dissecting scissor- straight- 1such 13.Yankauer’s oral suction- 1such 14. St. clair thomson’s adenoid curette with cage- 3 sizes- 1each

01 set

200.00


15. Long tooth forcep- 1such 16. Quinsy forcep- 1such

11 SEPTO-RHINOPLASTY

SEPTO-RHINOPLASTY

1. Thudicum’s nasal speculum- 3 sizes- 1 each

2. St. Clair thomson’s long bladed nasal speculum- 3 sizes- 1 each

3. Killian’s self retaining nasal speculum- 2

4. Freer’smucoperichondrium elevator-2

5. Luc’s forceps- 2 sizes- 1 each

6. Killian’s nasal gouge- 1such

7. Tilley’s antral Harpoon-1such

8. Tilley’s antral trocar and cannula-1such

9. Tilley’s Forcep- 1 such

10. Turbinectomy scissors- 1 such

11. Walsham’sforcep- 1 such

12. Asch’s forcep- 1 such

13. 2mm osteotome-1 such

14. 2mm osteotome with guard-1 such


16. 10mm osteotome with gurad-1 such

17. Mallet-1 such

18. Cartilage scissor-1 such

01 set

400.00


19. Aufritch retractor-1 such

20. Killian’s ala retractor-1 such

21. Push rasp-1 such

22. Pull rasp-1 such

23. Joseph saw-1 such

12 MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY

MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY 1. Kleinsasser’smicrolaryngoscope- 1such

2. Anterior commisure laryngoscope- 1 such

3. Light cable for laryngoscope-2

4. Riecker’s chest holder

5. Microlaryngeal cup forceps- straight, right turn, left

turn, up turn- 1each

6. Microlaryngeal alligator forceps- 2

7. Microlaryngeal scissors- straight, right turn, left turn- 1

each

8. Microlaryngeal blunt dissector with handle- 1 such

9. Microlaryngeal knife with handle- 1such

10. Vocal cord retractor with handle-1 such

11. Microlaryngeal suction- 1 such

12. Microlaryngeal suction with diathermy- 1such

01 set

400.00


13 GENERAL INSTRUMENTS

GENERAL INSTRUMENTS

1. AdsonTooth forceps- (5”)-4 such

2. AdsonNontooth forceps- (5”)-4 such

3. Needle holder- (6”/5”/4”)- 6 each

4. Curved needle holder-( 4”)- 4

5. Mosquito Artery forceps- curved(4”)- 24

6. Medium artery forceps-curved(5”/4”)- 6 each

7. Large artery forceps- curved(7”)- 6

8. Right angle artery forceps- large/medium(7”)- 4

9. Kocher’s artery forceps(6”)- 4

10. Sinus forceps-2

11. Kocher’s gland holding forceps(6”)- 2

12. Babcock’s gland holding forceps(6”)- 6

13. Alle’s tissue holding forceps(5”)- 12

14. Tissue cutting scissors- straight/curved(5”)- 2 each

15. Medium dissecting scissors- curved(6”)-4

16. Small dissecting scissors- curved(4”)- 4

17. Langenberg’s retractor- 4

18. Metal suction cannula- 3 sizes(

2.5mm/3mm/4mm)- 4 each

01 set

200.00


19. Humpy’s knife- 1

20. Malleable sinus probe-2

21. Towel clip- 24

22. Kidney dish( 6”/8”)- 4 each

23. Sponge Holding Forceps (8”)-6

24. Catspaw- 4 pair

25. Gallipot-6

26. Tilley’s Forceps- 4

27. Hartman’s forcep-4

28. Chettle forcep-6

14.

High Speed Microdebrider system for Nasal Endoscopic Surgeries, consisting of :-

Main Console

1. The system should be suitable for wide variety of procedures ranging from Rhinology, Other transnasal procedures, Otology/ Neuro otology / Nasopharyngeal / laryngeal / tracheal / bronchial/ and hand piece for Adenoid specific application.

2. Should have large Touch screen monitor. The various parameters should be able to adjust either from touch screen panel or from the multifunction foot switch.

1pc

10000


3. Should be able to connect multiple hand pieces at a time like debrider hand pieces (Up to 5000 RPM in Oscillating mode & 12000 RPM in Forward mode), low speed Otology drills (Up to 16000 RPM) and High speed Otology drills (Up to 80000 RPM).

4. Should have inbuilt pumps each for Irrigation and Cooling.

5. Should have multifunction ergonomically designed foot control with

light emission for easy identification.

6. Should be able to control Speed / Mode, Forward / Reverse toggle, Active hand piece change from the Foot control itself.

7. Should have option for remote control Irrigation to operate from sterile

area.

8. Should have in built Lens cleaning system.

9. Should have 0 Degree, 30 Degree, 45 Degree & 70 Degree endoscope sheath compatibility for Automatic Lens cleaning system.

10. Should have provision to connect facial nerve monitor with the

Otology drill.

11. Main Console should have an option to operate manual foot paddle from console itself in case the foot paddle are not working.

12. Should have the provision to mount the console on various sizes of IV pole.

Hand piece:

1. Should be compatible with main console.


2. Should be able work up to the speed of 12000 RPM in forward rotation and 5000RPM in oscillation mode.

3. Should have finger tip control to rotate only the tip of the blade up to 360 deg.

4. Should have straight suction path to reduce clogging and allow efficient tissue removal.

5. Should have integrated blade locking system to lock the blade tip rotation.

6. Should have integrated side grooves and cable clips to provide better tubing management.

7. Should have Titanium body to avoid rusting.

8. Should be able to operate 120 Degree curved blade for Maxillary Sinus Application.

9. Should be able to operate Diamond & Cutting burs for DCR Surgeries.

10. Should have provision to operate Inferior Turbinate blade for Turbinoplasty and Adenoid blade Adenoidectomy.

11. Should be compatible with Frontal Trephination System. Microdebrider blades and burrs

1) Straight Blade 0 Degree 4 mm- 01 pc. 2) 40 Degree Curved Blade 4 mm 01 pc. 3) 60 Degree Curved Blade 4 mm 01 pc. 4) 120 Degree Curved Blade 3.5 mm 01 pc. 5) Inferior Turbinate Blade 2.9 mm 01 pc. 6) 40 Degree Adenoid Blade 4 mm 01 pc. 7) Tonsillectomy Blade 4 mm 01 pc.


8) High Speed Diamond DCR Bur 2.5 mm 03 pcs. 9) Tapered Diamond Bur 4 mm 01 pc. 10) Laryngeal Blade 2.9 mm 22.5 cm Long 01 pc.

High Speed Otology Drill (Motor) 1) Coolant Tubing 02 pcs. 2) 7.5 cm Straight & Angled Attachment 01 pc. Each 3) 1 mm to 7 mm Cutting Bur 01 pc. Each 4) 1 mm to 7 mm Diamond Bur 01 pc. Each

Low Speed Otology Drill (Motor) 1) Crura Saw 0.75 mm 01 pc. 2) Perforator 0.5 mm 01 pc. 3) 0.6 mm to 0.8 mm Diamond Burr 01 pc. Each

Automatic Lens Cleaning System 1) 0 Degree Endoscopic Sheath 05 pcs. 2) 30 Degree Endoscopic Sheath 05 pcs. 3) 45 Degree Endoscopic Sheath 05 pcs. 4) 70 Degree Endoscopic Sheath 05 pcs. 5) Finger Switch 01 pc.

ALL THE ABOVE EQUIPMENTS SHOULD BE CE AND FDA & ISO APPROVED AND FROM SINGLE MANUFACTURER COMPANY NO LOCAL ACCESSORIES WOULD BE ACCEPTABLE. NO ECONOMY CLASS, E CLASS OR E LINE MODEL SHOULD BE ACCEPTED.

SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT OF MICROBIOLOGY ESI-PGIMSR, JOKA 1 Real time

Polymerase Chain Reaction (PCR) System

SPECIFICATIONS Real time Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection

01pc 36000.00


with Qualitative and Quantitative detection

a. The Real time PCR System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and IVD certified.

b. The Real time PCR System should be an open platform system, and must have provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases.

c. The Real time PCR System must at least have the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :

i. Human Immunodeficiency virus

ii. Hepatitis B virus

iii. Hepatitis C virus

iv. Cytomegalo virus

v. Ebstein Barr virus

vi. Herpes Simplex virus

vii. Mycobacterium tuberculosis

d. There should be provision for using the system as simple Thermocycler for qualitative molecular detection of infectious diseases.

e. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of


reports) with original operating system and free software support for the lifetime of the machine.

f. The Automated Real time PCR System should have already been installed in at least two (02) reputed Academic and / or Medical institutions and / or reputed accredited diagnostic laboratories in the Eastern region of India.

g. Technical Parameters:

Features Specification Thermal Cycler Mechanism

Air based heating and cooling mechanism for maximum uniformity with even heating and cooling.

Sample Layout Should be flexible for the tube input volumes having capability of running 96 or more samples.

Additional Intra-assay Centrifugation

Any additionalstep of centrifugation of tubes while performing the assay should NOT be there.

Uniformity

Should have uniform temperature distribution. Should maintain iso-optical detection in all wells for maximum uniformity. Temperature uniformity should be in the range of ±0.02oC.

Chemistries Should come with standard chemistries for gene expression, quantification, mutation scanning, genotyping and methylation studies.

Temp Range Up to 99℃ Light Source

Different LED’s with 5 different wavelengths with minimum cross-talks (one LED with one wavelength). The assay should not be based on onesingle wavelength of light.Should be able to detect all wells equally with same optical path length.

Light Source Lifespan

Warranty on light source for minimum of 10 years.

Excitation Should be minimum 5 plex. Should have capability of further


Plexing increasing the multiplexing beyond 5-Plex in singe tube. Dynamic Range Should be of 10 orders of magnitude Reaction Volume

10 µl-100 µl

Passive Reference Required?

Should NOT require any passive reference dye

Tube Format Should be able to mark the caps of the tubes. Should have flexible tube format. NOT CAPILLARIES.

Software Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine.

In vitro diagnostics Approval

Real Time In vitro Diagnostics approved validated kits on quoted model as mentioned above should be available with instrument manufacturer. Instrument should also be In vitro diagnostics certified for use in diagnostic laboratory.

2 Automated (Multicapillary

) Capillary Electrophoresis

System

Automated (Multicapillary) Capillary Electrophoresis System:

a. The automated multicapillary electrophoresis System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or IVD certified and/or ISI certified.

b. It should be a fully automated capillary electrophoresis system for fragments of DNA and RNA, which is based on high throughput nucleic acid analysis of at least 60 samples in one run within 30 minutes.

c. System should comewithReady-to-rungelcartridgesallowing samplesto be

01pc 36000.00


analyzed replacing laborintensiveagarosegel electrophoresiseliminating the need for handling carcinogenic compounds likeethidium bromide.

d. Post PCR samples should be directly analyzed for fragment analysis using the system without prior purification of samples.

e. The instrument should be usable for genotyping, restriction digestion, qualitative monoplex or multiplex PCR, PCR-based cDNA library screening and other routine molecular biology applications.

f. System should work with an input volume of equal or less than 1 μl offering a high sensitivity ofupto 1000pg.

g. Instrument should come with user-friendly analysis software including an accompanying Laptop with original operating system and free software support and upgradation for the lifetime of the instrument.

h. The Real time monitoring of the sample analysis should be visible on the computer screen.

i. Operating temperature : 20-28°C

j. Excitation Source : light-emitting diode (LED)

k. Detection Source : Photomultiplier Tube

l. The instrument must eliminate the need for a


separate Gel Doc system after Electrophoresis.

m. The instrument should be able to provide Standardized and accurate analysis with a resolution down to 5 base pairs.

3 Biosafety

Cabinet: Class II Type A2

with accessories

Biosafety Cabinet: Class II Type A2 with accessories:

a. The Biosafety cabinets must have International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.

b. Class II Type A2 biological safety cabinet with factory installed programmable UV light for surface disinfection.

c. Standard 4 ft model: Exterior dimension preferably not to exceed, 52 X 64 X 33 inch (W X H X D) ± 10%

d. Double Blower system; Brushless DC motor technology for saving energy consumption.

e. SmartFlow Indicator, with Digital airflow verification technology (The balance of downflow and inflow should control the cleanliness and containment – preventing room contamination from reaching the BSC work surface and keeping any biological hazards in the BSC work area from escaping out the front opening.)

f. Ergonomic design with 10° Slopped front,

02pc 10000.00


preferably with Armrest.

g. Supply / exhaust air filter specification: H14 HEPA or better. The HEPA or ULPA filters shall capture contamination in the room air and in air drawn from the BSC work area to create clean downflow and the exhaust air.

h. Service Valves (through side walled access ports)

i. Receptacles in the Rear Wall: load capacity of up to 5A

j. Smart Clean front window Design easily lowered for cleaning of inner surface & protects operator.

k. The provider must provide at least two (2) ergonomically designed compatible, height adjustable hydraulic or screw turn low back support revolving stools with each Biosafety cabinets for user operations.

4 Micropipettes

(0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.

Micropipettes (0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.

a. Each set shall contain 3 adjustable volume Fully autoclavablemicro pipettes of the following ranges:

i. 0.5 - 10μl

ii. 10 - 100μl

02 sets 2000.00


iii. 100 - 1000μl

b. Six (06) reusable T.I.P.S boxes with 96 Pipette tips in each boxes; Three pairs of boxes are to be compatible to the above three different sets of Micro pipettes.

c. The boxes and the tips should also be fully autoclavable.

d. The micropipettes should have Spring Loaded Tip Cone for improved ergonomics which should be tight fit to the tip.

e. Adjustment opening to adjust the pipettes to a specific liquid and volume.

f. Control Button with very low operating force, positioned for perfect ergonomics.

g. Ejector withvery low operating force, positioned for perfect ergonomics.

h. Volume Display: 4 Digits with magnification.

i. There should be quick connection clip toremove lower part easily.

5 Vortex Mixer Vortex Mixer (with accessories):

a. Digital vortex Mixer for Molecular Biology Applications with International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.

b. Should be ideal for applications demanding

01pc 1000.00


repeatable results.

c. Variable speed control at least from 500 to 3000 rpm. A higher range is allowable.

d. Touch keypad controls and LED display for speed and time. Not merely Analog controls, for ensuring reproducibility in molecular diagnostics.

e. Microprocessor control to maintain set speed for consistent mixing.

f. Timer displays elapsed time; auto shutoff at end of cycle.

g. Should be allowable to be used in 220 to 240 V and 50/60 Hz electrical supply.

h. Should have robust durable electrical connectivity conforming to standard Indian sockets.

i. The following accessories have to be quoted along with the vortex mixer, which can be steadily fitted and connected with the mixer:

I. 24 to48 numbers vertical Microtube Holder for mixing 0.25 to 2.0mL microcentrifuge tubes / PCR tubes or high-density foam inserts to accommodate 24 to 60 microtubes.

II. Vertical tube holder for mixing at least four (04) 50 ml tubes together.

III. Vertical tube holder for mixing at least


four (04) 5 ml (09 to 13 mm diameter) tubes together.

6 Molecular

grade DNAse RNAse free Water Purification System

Molecular grade DNAse RNAse free Water Purification System

a. The entire water purification system should be equipped with three part equipments, quoted together by the same bidder, including:

i. A Pretreatment Water filtration reverse osmosis system

ii. A Pretreatment Iron, hardness and particleremoval system

iii. A Molecular grade Water purification system proper.

b. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) must have National and/or International quality and safety certification, e.g. ISI and/or CE and/or UL/cUL certified.

c. The Molecular grade Water purification Systemproper (iii) must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified.

d. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should

01pc 30000.00


be able to be connected in series connection, directly from the pipeline ground-water feed and should be able to deliver output water quality compliant to the acceptable limit of the feed water of the Molecular grade Water purification system proper(iii) as mentioned below in tight fitted series connection.

e. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to deliver at least 15litres of water per hour to the Molecular grade Water purification system proper(iii).

f. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system (ii) should at least be equipped with the following technology:

i. * 2 Stage pretreatment system

ii. * 5 micron and 1 micron wrapped type depth filter

iii. * 3 Pressure gauges

iv. * Less than 50 Db noise levels

v. * Automatic low/high pressure cut off

vi. * DC pump with 0-2 pressure at 120L /hr

vii. * Inlet screen filter to DC pump


viii. * Optional filters : 0.5 micron

ix. * Optional filters : Activated carbon

g. The Molecular grade Water purification system proper (iii) should be able to deliver the required quality of pure and ultrapure water from its feed water acceptance level of:

1) 2000micro Siemens conductivity

2) Fouling Index (SDI) < 12

3) Total Chlorine < 3 ppm and

4) TOC <2000 ppb

h. The Molecular grade Water purification system proper (iii) should beable to deliver reagent Grade Type 2 water (pure quality) and Reagent grade Type 1 standard water (ultrapure quality) as defined by standard international quality control organizations like ISO:3696 standards and / or Clinical and Laboratory Standards Institute-Clinical Laboratory Reagent Water standards and / or ASTM standards.

i. The Molecular grade Water purification system proper (iii) should have two different points of delivery. It should be able to deliver through one point of delivery, reagent Grade Type 2 water (pure quality) bacteria and pyrogen free water, which may be used for basic laboratory needs, such as buffer and reagent preparation,


microbiology media preparation, histology and rinsing of glassware of the following grade:

Type 2 Pure grade Water outlet

Parameter Value

Resistivity, Mega Ω @ 25 °C 10 – 15

Programmable water flow rate / minutes ̴01

TOC, ppb (μg/l) < 30

Bacteria, cfu/ml < 10, reducible to < 0.1 *

Particulates > 0.22 μm, Particulates/ml < 1 *

Silica rejection 99.9%

Pyrogens (endotoxins), EU/ml < 0.001 **

RNases, ng/ml < 0.01 **

DNases, pg/μl < 4 **

(*) With special filter for microbiological grade water

(**) With special filter for molecular grade water

j. The Type 2 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following


technologies:

1) Pretreatment cartridge

2) Reverse Osmosis with a high flux polyamide membranewith 94- 99% ion rejection backed by Pump with temperature feedback mechanism so that the flow rate should be 3 ltr/hr at room temperature .

3) Electro Deionization with auto regeneration by electric current, eliminating the need for chemical regeneration or replacement of DI resin cartridges with carbon beads at cathode of the EDI module to prevent scaling inside of the module

4) Activated Carbon cartridge

5) UV lamp with 254 nm Wave lengthbefore entering the tank

6) Recovery loop with capillary tube and diaphragm valve to minimize water wastage

7) Carbon beads at cathode of the EDI module to prevent scaling of the module

8) Permeate divert valve which will divert low quality water to the drain

9) Coaxial resistivity cell with a flow


through design and a cell constant of 0.01cm-1

10) Display both compensated and non-compensated temperature accurate within ±0.1°C.

11) The reservoir tankshould be blow moulded, cylindrical PE reservoir with a conical bottom and opaque walls with a minimum of 30 litres capacity.

12) Sensor rod float switch, programmed to have high and low level cut-off based on water level in the tank.

13) The reservoir tank should possess a tank vent filter made of soda lime, activated carbon and 0.22 micron hydrophobic membrane to trap contaminants present in atmospheric air.

14) The Point of Delivery units should be of adjustable height and rotating arm-adjustable to any glassware.

15) There should be multicolour monitor displaying resistivity, TOC, level of water in reservoir, volume dispensed etc.

k. The Molecular grade Water purification system proper (iii) should also be able to deliver


through a different point of delivery, Type 1 water (ultrapure) DNA, RNA, DNAse, RNAse free water for molecular biological applications, suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture of the following grade:

Type 1 Ultrapure Molecular grade Water outlet

Parameter Value

Resistivity, Mega Ω @ 25 °C Around 18.2 (> 18)

Programmable water flow rate / minutes ̴ 0.05 to 2


Bacteria, cfu/ml < 0.1 *







l. The Type 1 water (pure quality) production system / chamber of the Molecular grade Water


purification system proper (iii) should be enabled at least with the following technologies:

1) Water source feed should be a closed connection from the Type 2 water reservoir tank eliminating any possibilities of contamination.

2) Re-filtration through two stage mixed bed ion exchange and activated carbon cartridge to remove ionic and organic contaminants to trace levels.

3) Low pressure mercury vapour lamp made of quartz with 185/254 nm dual wavelength UV lamp.

4) Should contain high-precision resistivity meters with following features-

a. Coaxial electrodes to warrant cell constant stability.

b. Low cell constant (0.01 cm-1) for optimum measurement accuracy of low ionic contamination

c. Temperature measurement with a 0.1 °C resolution for proper report of temperature compensated resistivity

5) Should contain a built in TOC


monitorwith a Quartz celland UV lamp which should accurately measure online TOC from 1- 999 ppb.

6) To prevent deterioration of water quality during periods of non-use, the ultrapure water system will be able to recirculate water to maintain high water quality.

7) Special filter packs for ultrafiltration and DNAse RNAse removal at the point of delivery or dispensing unit.

8) Controllable & user login password protected dispensing unit for Type 1 ultrapure water with ultrafiltration cartridge at the collection end with Log Reduction Value between 5.6 and 7.65 over challenge range of 220 and 22000 Eu / mL.

m. To avoid maintenance errors and to improve traceability, the internal primary consumable water purification cartridges should have a built-in RFID tag.

n. To comply with Standard requirements, the resistivity meter shall be able to display the non-temperature-compensated resistivity.

7 Automatic

Electronic Automatic Electronic Laboratory Balance 01pc 400.00


Laboratory Balance

a. The Electronic Laboratory balance should have International and/or National quality and safety certification, e.g. CE and/or UL/cUL-listed and/or ISI certified.

b. The maximum weighing capacity should be 500 grams with a tare range of 0 to 500 gm. A higher range is allowable.

c. The minimum readability should be 0.1 mg differences.

d. The balance should be fitted with durable electrical connectivity compatible to Indian electrical standard sockets and operable in 220 to 240 V and 50/60 Hz electrical supply.

e. The balance plate should be covered with High draft shield fibre / glass covers with mounted front and rear fibre / glass panels, including sliding doors.

f. The balance should have digital electronic display and preferably soft touch controls for Power, Tare and calibration options.

8 Carbon dioxide

(CO2) Incubator

Carbon dioxide (CO2) Incubator: Technical specifications

1. CO2 Incubator with work chamber volume approx. 150 to 190 liters / 5.3 to 6.5 cu. ft (± 10%).

2. Air jacketed heating system with temperature

01pc 400.00


control by microprocessor. 3. Temperature range from ambient +3 o C to + 55

o C. 4. Temp. Deviation with respect to time is + 0.1K. 5. Continuous air Contamination prevention by in

chamber Class 100 HEPA Air Filtration. 6. Event based Decontamination with in-built moist

heat High temperature cycle, with ease operability, preferably single switch operation of sterilization cycle. The built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc without removing sensor, fan or any other fitting. The system should employ automatic decontamination routine at moist heat of 90o C or equivalent.

7. CO2 control by Microprocessor based & by heat resistant Thermal Conductivity detector to withstand heat of decontamination.

8. CO2 range 0 to 20% or better and CO2 accuracy + 0.1% by volume.

9. System should have Interactive Control with Touch screen for rapid access of important information for each critical parameter in the Incubator.

10. Humidity range should be 95% rH or higher. Recovery time for humidity loss during door opening for 30 seconds upto 96% rH of initial value should not be more than 20 minutes.


11. At least 3 nos. stainless steel perforated shelves should be supplied.

12. It should be supplied with access port to allow any cable, plug or tubing to be easily inserted into or out of the chamber.

13. Interior chamber should be made of stainless steel with electropolish finishing of inner surface with rounded corners on all sides for easy cleaning. The shelves and fan impeller also should be made of stainless steel and should not have nuts or bolts for shelf supports to reduce the scope of growth of contamination. No plastic parts should be inside to avoid VOC.

14. Built-in audible and visual water level alarm should be available when the water reservoir (water tray less system to avoid contamination) needs to be refilled to ensure a constant high level of humidity and to prevent cultures from drying out.

15. Independent electronic over temperature protection with separate sensor should be available for sample protection.

16. The system should have large digital display for both temp. & CO2 simultaneously.

17. System should have at least two doors, one main door and one glass doors.

18. Suitable for 230V, single phase 50Hz operation. 19. Suitable servo voltage stabilizer with high

voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc.


20. Double stage CO2 pressure regulator with stainless steel diaphragm.

21. 18Kg CO2 Cylinder filled with CO2 gas 99.5% or better purity required for operation of CO2 Incubator, along with cost of refill should also be quoted.

9 Hot air oven

Hot air oven Technical specifications

1. Should be CE certified internationally quality control approved instrument.

2. Corrosion-resistant galvanized steel chambers. 3. Digital display and timer facility 4. Upper temperature cut off ( automatic) 5. Microprocessor temperature control. 6. At least 2 tilt proof wire-mesh shelves 7. Chambers and heating elements should made of

corrosion resistant steel. 8. Chambers should be easy to clean. 9. Volume minimum 75 litres 10. Operating temperatures from 50° to 250°C. 11. Easy to use, microprocessor-controlled touch

button operation.

02 pcs 2500.00

10 Automatic

Evacuation-

replacement

system for the

Automatic Evacuation-replacement system for the culture of anaerobes, capnophiles, and microaerophile:

1. Automatic evacuation-replacement system

01pc 4000.00


culture of

anaerobes,

capnophiles,

and

microaerophile

with at least One to Three (1-3) gas inlet connections: CO2, H2, and O2 and One to Four (1-4) jar outlet connections.

2. The System should be internationally quality control certified, e.g. CE / ISO / ISI certified.

3. The System should have pre-programmed functions with easy to use, preferably single touch key operations for preparing Anaerobic, Microaerophilic and Capnophilic culture conditions.

4. Following associated transparent Polymethylmethacrylaat (PMMA) jars with Gas tight fit by means of a snap-shut adaptor on the lid of the jar and stainless steel petri dish holders of the following dimensions are required to be supplied along with:

a. Two (02) equivalent jars: Diameter and height: Ø =123mm, h=240mm (±10%) Volume: 2.75 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 9-10cm (±10%)

b. Two (02) numbers of Petridish holders: Petri dish holder for 12 Petri dishes with Ø 9/10cm made of stainless steel

c. Two (02) equivalent jars: Diameter and height: Ø =175mm,


h=240mm (±10%) Volume: 5.65 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 14.5cm (±10%)

d. Two (02) numbers of Petridish holders: Petri dish holder for 10 Petri dishes with Ø 14.5cm made of stainless steel

e. One (01) number micro well plate holder: Holder for micro-well plates of 9 x 13 cm, made of stainless steel

f. One (01) equivalent jars: Diameter and height: Ø =230mm, h=240mm (±10%) Volume: 9.66 L (±10%) Contents: 3 stack of 12 Petri dishes with Ø 10cm (±10%)

g. One (01) number of Petridish holder: Petri dish holder for 3 x 12 Petri dishes with Ø 9/10cm, made of stainless steel, to be fitted in the height of 240 mm jar.

5. Palladium coated catalyst pouches ideal for the big jars:

a. SIX (06) Sets of catalysts, ideal for the big size jars are to be provided along with, which can be easily re-


used by reactivation in Hot air oven. 6. Reducing valve: To reduce the pressure in

the gas cylinder to the system working pressure, a reducing valve has to be provided with the gas cylinder(s). This must be a 2-step reducing valve, preferably calibrated and supplied by the same manufacturer, which has manufactured the Automated evacuation-replacement system. The working pressure should be adjustable to 1.8 Bar or 26 psi.

7. Option of user programming function (free user programming of oxygen level, gas mixture and evacuation level) should be there.

8. Option for Preprogrammed recipe for oxygen level, gas mixture and evacuation level should be there.

9. The bidder should also quote for 18Kg CO2, H2, and O2 Cylinders filled with CO2, H2, and O2 gases 99.5% or better purity required for operation, along with cost of refill should also be quoted.

11 Hot air sterilizer, 160ºC

Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ----

2 1000


Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system

12 Venereal Diseases

Research

Laboratory (VDRL)

shaker

Bench top, 12” x 12” platform size Built in timer 0-15 minutes Maximum speed of 180 rpm Built in speed regulator

2 100

13 Macintosh fields

anaerobic jar

Anaerobic system

Supplied with transparent unbreakable poly carbonate jar of approximately 3.5 lt capacity

2 50


Sturdy aluminum lid clamp and sealing ring with built in safety features

Pressure valve with safety valve and two way pressure guage

Anaerobic indicator tablet

Anaerobic gas pack 3.5 lt

Petri plate carrier

14 Dissecting

microscope

Eye piece 10 x Adjustable mirror

2 2000


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT OF DENTAL

1. Chair Unit Specifications of dental Equipments /Instruments of newly Developed upcoming Dental Surgery

1. Chair Unit : Electrically operated programmable

chair, both hand and foot control operation, over

hanging delivery unit, spittoon with auto flush,

High and low intensity operating light,

motorized suction (with auto drain) X-ray viewer,

three way syringe, zero backache doctor’s stool.

a) Light cure unit : Light emitting diode (LED)

b) Air rotar with Controlled box : along with

(i) Air compressor: Minimum 1.5 HP, Oil free

(ii) Air rotor Hand piece: 2 to 3 Lakhs RPM

01 each

10000.00

2 Dental Electro

Surgery Unit with

multiple tips

Dental Electro Surgery Unit with multiple tips

01 pc 1000.00

3 Automatic dental X-

ray film developer –

Automatic dental X-ray film developer –IOPA (Intra oral Peri

apical radiograph) automatic processor

01 pc 1000.00


IOPA (Intra oral Peri

apical radiograph)

automatic processor

4 Lead apron for use

along with dental X-

ray unit

Lead apron for use along with dental X-ray unit

01 pc 100.00

5 Electric High Speed

Micro motor

Electric High Speed Micro motor of about 35000 RPM with reverse forward switch, foot control, with Both straight and contra angle Hand Piece.

01 pc 5000.00

6 Ultrasonic Scalar Ultrasonic Scalar : with four tips

02 pcs 100.00


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT. OF RADIOLOGY ESI-PGIMSR, JOKA

1 500 MA X-RAY

MACHINE Technical specification of 500 MA X-RAY MACHINE

A 500 mA. Multipulse High frequency X-Ray machine for Radiography. RATINGS: 50KW High frequency X-Ray generator for radiography . Radiography Parameters: 35 to 125KVor150 KV Multi steps as many as possible Small Focus – 100 mA & 200 mA Large focus – 300mA, 400mA and 500mA mAs – 1.25 to 200 mAs in multiple steps as many as possible. Control: Floor or Wall mountable control panel, ON and OFF switches Automatic safety system to block unwanted exposure factors beyond tube ratings. Digital display of active KVP, mA and mAs. Hand switch with flexible long retractable cord. Compact durable soft touch keypad. Table or Vertical Bucky selection and table top radiography switch. Ready and X-Ray on switch with indications. Tube Unit: Rotating anode tube unit with dual focus x-ray tube insert. Anode Speed:- Minimum 2800 rpm. Focal spot:- Dual focus, Small focus:- 0.6mm to 1 mm Large focus:- 1.2mm to 2.00 mm Protection:- Totally thermal Protection. HV/HT cable compatible with X-ray tube.

01 set(against condemnation)

40000.00


Motorized tube movement with all round tube angulation preferable Collimater: Manual light beam diaphragm. Tube Stand: Floor to ceiling stand and with counter balanced tube head 360 degree rotation (rotatable+/- 180 degree), tube rotation with column axis all round movement ( Longitudinal, Transversal, UP & Down), mounted on floor ceiling rails for convenient movement. Safety lock in case of wire shortage. Ceiling suspension tube preferable. Table: Motorized table with 6 way movement (table height adjustment) . Motorized bucky with grid ratio 8:1 (80 to 100 lines per inch). Stainless steel cassette tray with electromagnetic brakes. Stain free laminated table top. Operating Voltage: 400-440 volt AC 50 HZ. Three Phase. Chest Stand: Motorized or manual Vertical Bucky Stand with counter balanced. Head to Toe Vertical travel (455mm to 1900mm). Electromagnetic locking method (lock released when switch is pressed). Also separate Cassette holder attachment with the Vertical Bucky Stand for direct exposures. Accessories:- Compression Band, Hand Grip & foot step. Unit should have the AERB approval.


DEPARTMENT OF PAEDIATRIC

1 NEONATAL

RESUSCITATION

UNIT WITH

WARMER

NEONATAL RESUSCITATION UNIT WITH WARMER:- NEONATAL RESUSCITATION UNIT (MICRO-COMPUTER CONTROLLED) WITH WARMER SPECFICATION:-

a) Controlled Resuscitation system. Oxygen

Administration facility, Low Pressure suction and

warming with infrared Radiant Heat Source.

b) Inline Manometer,

c) Oxygen Administration Facility: i) Oxygen Flow

control facility with flow meter (o to 15 lit/min).ii)

Oxygen Pressure Adjustment valve, iii) Humidifier

Bottle, iv) Facility to keep Oxygen cylinder, v)

Connecting hose for wall Outlet. vi) Silicon

Autocluvable Resuscitation Bag with 00 and 01 size

of Masks.

d) Slow Suction: This is a specially designed

electrically operated slow suction. Apart from

others, it is non-motorized slow suction. The

suction pressure can be adjusted as per

requirement.(0-110 mm Hg.)

e) Servo Control System to maintain an optimum skin

temperature.

02 pcs (against condemnation)

4000.00


f) Precise cradle Temperature control.

g) Manual Warming Facility.

h) Stop Watch- additional Facility provided to note

down timings during monitoring various vital signs

of baby, e.g. temp. Heat rate, Respiration Rate.

i) Reminder Timer.

j) Apgar Timer with Birth Time Recorder.

k) a) Power Source: 230 +/- 10% volts. 50 Hz.

B) Control Method: Micro-Computer Controlled

intelligent proportionate Power Control.

c) Heater Capacity: 600 Watts.

d) Light Source: 60 watts bulb to examine babies.

e) Power Consumption: 850 watts.

m) Temperature Controller Specifications:- I. Skin Mode Control: From Body Temperature to 38 C.

II. Air Mode Control: From Room Temperature to 39 C. III. Resolution: 0.1 C. IV. Accuracy: +/- 0.2 C. n) Alarms: (Audio visual with auto Reset facility) Alarm Condition Message on Display

Skin + I.C. HI

Skin - I.C. LO

Air +1.5 C HI

Air - 3 C LO


Skin >38C OVER

Air<39C OVER Skin/Air Sensor Failure Fail Heating system Failure HEAT OFF o) Safety Cutoff; When Skin Temperature exceeds 38C. When Cradle Temperature exceeds 39C. p) Power Failure Alarm: Audio –visual. q) Distance between Heater source and Baby: 88 (34.5) r)Dimensions: Height X Width x Depth-cm (inch) 203 (80) X 63.5(25) X 100 (39.5) s) Baby Tray: Length 72 (28.3) x width 45 (17.7) t) Should have 1 drawer system attached with the equipment for storage facility. w) It should be in compliance with ISO 9001:2000. Should have Q.A. International Certification Limited.

2 DOUBLE SURFACE LED PHOTOTHERAPY

DOUBLE SURFACE LED PHOTOTHERAPY Specification:- Wide Effective Area.

Unit should have blue cool led light source with wave length of

450-460 nm.

Long Life->20,000 Hrs.

No UV / IR Radiation.

No Heat Generation.

Low Power consumption.

Negligible Maintenance Cost.

Light Weight & Compact.

Height and Angle Adjustment facility.

Mounted on Castor Wheels for Easy Mobility.

02 pcs(against condemnation)

2000.00


Can be used in Conjunction with any make radiant Warmer.

Digital time Totalizer.

Irradiance> 60 u/W/cm2/nm.at 45 cm from the light source.

Wavelength 450-460 nm (peak 455 nm free of UV and IR

radiation.

Height adjustable from 1198+/-20 mm to 1680+/-20 mm

UNDER SURFACE SOURCE UNIT:

Unit should have blue cool led light source with wave length of

450-460 nm.

Free of UV/IR radiation.

Light intensity is variable from 7-60 um/nm/cm2.at a distance of

45 cm.

Infant care Trolley in Stainless Steel Specification:-

Mechanical Specification:-

Convenient working level with 6 mm thick imported acrylic

collapsible side support, accessible from all sides.

Acrylic Tray with Foam mattress. IV Pole & Facility to take X-

ray.

Head up /down facility.

Stand with separate Infant care trolley.

Mounted on 4” castor wheels for easy mobility.

Infant care Trolley with transparent acrylic bed and bubbles

mattress for baby. Fabrication in mild steel, baby bed area in

Stainless steel.

3 CPAP MACHINE SPECIFCATION OF CPAP MACHINE SYSTEM: Valve based continuous flow CPAP and IPPR. Bubbler based bubble CPAP. DISPLAYS: Digital and Analog Display of CPAP pressure in


2000.00


CPAP Mode. Continuous Digital display of Delivered pressure in IPPR Mode. ALARMS; CPAP High and low Alarms (Audio Visual)

PRESSURE GAUGE: -20 to 100 cm H2O

GAS MIXNG: Air-Oxygen Mixer using calibrated Rotameters.

AIR SOURCE: Inbuilt Air Compressor (Optional) (20 to 90

PSI).

O2 SOURCE: Inlet for Oxygen Gas (20 to 90 PSI).

POWER: 230V A.C. 50 Hz.

Asccessories: Warmidifier, Breathing Circuits(Disposable).

CPAP Interface, Nasal Prongs, Dummy Test Lung.


SL. NO.





EMD VALUE

QUOTED (YES/NO)

Department of Biochemistry 1 SEMI AUTOMATED

BIOCHEMISTRY ANALYZER

SPECIFICATION FOR SEMI AUTOMATED BIOCHEMISTRY ANALYZER. I. Item : Semi Automated Biochemistry Analyzer with UPS 0.5 KVA. II. Analysis Option: a. Absorbance b. 1 point end linear & non linear. c. 2 point end linear & non linear. d. Rate linear & non linear. e. Immunoturbidimetry. OPTICAL SYSTEM III. Light Sources: Pre aligned Quartz halogen lamp. IV. Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice. V. Measurement Time : Selectable. CUVETTE SYSTEM Cuvette : a. Flow cell Cuvette. b. External rectangular Cuvette. VII. Cuvette Temperature: Peltier control &

01 pc 6000.00


programmable at 25˚C, 30˚C and 37˚C. VIII. Aspiration System: Motor driven pump. IX. Aspiration Volume: Programmable. X. Cuvette Blanking: Automatic. FUNCTIONS

XIII. Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system, selection through keyboard. XIV. Calibration: Automatic against standard / calibration. XV. Quality control: a. 2 levels of control (at least) b. Levey - Jennings diagram. c. Manual entry of QC result. XVI. Memory Storage: a. Minimum 200 patients result. b. Calibration result. c. Quality control result for 01 month. XVII. Display: a. Graphic LCD. b. Display of reaction curve, absorbance, temperature. c. Display of result of real time. d. Graphical display of reaction time. e. Calibration curve graphical display. XVIII. Key board: a. Chemical and moisture prevented single touch alphanumeric membrane key panel.

OPERATOR INTERFACE


XIX. Printer: a. Built in thermal printer with full graphic facility. b. Parallel full page ink printer with formatting options. XX. Reporting format: a. Conventional b.SI unit(Optional/Interconvertible). XXI. Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength. XXII. Automatic Flagging: a. Absorbance and linearity cheek. b. Reagent stability. c. Substrate depletion. XXIII. Peripheral interfacing: a. Parallel ports for external printer , keyboard and PC. Software PC Compatible. XXV .Power Cord : Indian Type 3-pin power cord locally available and replaceable . XXVI: Dust Cover : Washable dust-covers for main unit and key-board, etc. XXVII: Working Manual : Working Manual by

manufacturer in original

2 HbA1c analyzer Specification for HbA1c analyzer Analytes HbA1c Principle HPLC Technology Sample Volume Less than or equal to 3ml. Sample loading Should load (50-60) samples simultaneously capacity with continuous loading facility.

01 pc 2000.00

SOFTWARE

ADDITIONAL


Throughput < 8 minutes per sample Assay time Minimum Assay Time Assay Should be able to detect correct HbA1c values in the presence of commonly occurring abnormal haemoglobin variants. Primary tube sampling Facility should be there Calibrators External /Internal Control Control should provide External /Internal normal and abnormal control. Check facility Should be able to check all system parameters (cartridge, reagent, waste etc) CV < 3% Approvals Any two approval from the following CE / FDA /IFCC/NGSP approvals

3 Test Tube rack _________________________ 20 pcs 50

4 Water Bath Rectangular

Water Bath Rectangular: Thermostatic control /; Boiling Water baths, with lids having 8-12 Holes with shaker Specification: Temperature range from ambient to 950C. Thermostatic control with an accuracy of +/- 10C. Double walled with inner wall of stainless steel and outer of MS powder coated, with lids of SS. The unit is provided with immersion type heaters to work on 220 V.A.C. The unit is supplied with indicating lamps. Main chord and Plug. Size of the inner chamber- 355x100mm; 1.5kw with shaker.

01 pc 1000

5 Colorimeter Specification:Photoelectric colorimeter with filter Digital Colorimeter - Highly Stable & accurate Ideal Clinical instruments for Blood & Chemical Analysis. Models Available ME 953 C 5 Filter ME 954 C 8 Filter ME 944 C 8 Filter With Battery Option. Range : 400 nm to 700 nm Filters 5 High Standard Filters, Accuracy ±

4 Nos 400


0.02 O.D., Reproducibility ± 0.01 O.D., Out Put Optical Density 0 to 1.99, Display 2 ½ Digit LED Display, Detector Selenium Photo Cell, Light Source 6.2 V 0.3 Amp. Tungston Filament Lamp, Min. Volume 1 µl., Power 230 V ± 10% 50 Hz AC, Size (LXBXH) 225 x 230 x 150 mm, Weight 4 kg. (Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.


SL. NO.





EMD VALUE

QUOTED (YES/NO)

DEPARTMENT OF PHARMACOLOGY 1 Cannula-made of corning glass (Arterial- hollow bulb with

three arms, Venous–hollow glass tube- 4-5cm length & 3-4 mm diameter Syms cannula)

10 each 500.00

2 Four Unit isolated organ bath palmer F.67 For Internal Organs with stirring arrangements, made of transparent acrylic sheet, chemically welded to make leak proof. Complete with uprights, organ & oxygen tubes, capillary tubing, and frontal lever etc.Temperature by immersion heater and control by thermostat.

1 500.00

3 Dissection instruments and injection syringes as required Sets containing surgical standard scissors-2, curved scissors-2, pointed scissors-2, artery forceps-2, Mosquito artery forceps-2, scalpel handle-2, plain forceps-2, toothed forceps-2, small retractors-2, etc. Probes-2, hooks-2. To be supplied with proper cover and box.

1 500.00

4 X-blocks as required(Open and Closed) Machined from solid Brass rod, richly chromium plated to hold 9mm, 6mm and 12.5 mm rods

10 each 500.00

5 Hook grip rods as required- Should be suitable to fit in an X-block

25 500.00

6 Plain stand 25 500.00

7 Hair Aesthesiometer-Palmer W.290 1 500.00

8 Copper Trays (10”x8”x1”) 25 500.00

9 Microscopes ordinary - With fixed bright filed two lens condenser and iris diaphragm, heavy metal stand with triple nose piece. Coarse adjustment by rack and pinion and fine adjustment by precision grade slow motion arrangement in a beautiful storing cabinet -

2 500.00


Total magnification 675 x Eye pieces H10x, H15x Objectives 10x, 45x (spring loaded)

10 Chemical Balance – Sensitive Balance beam scale, capacity: 120g/0.01g 220g/0.01g 320g/0.01g 1200g/0.01g 2200g/0.01g 3200g/0.01g. Power AC/DC with lithium battery. Display: LCD/LED with back light. Fan size: diameter 130mm.

1 500.00

11 Skin and Rectal Thermometer Barun - 1 500.00

12 Starling's or Heart Lever:-This lever is used to record the contraction of heart. The differences between this & other isotonic levers is that fulcrum lies at one end beyond the point of attachment. It consist of a frame carrying a light lever arm with holes and notches supported by a fine adjustable nickel silver spring attached to an adjustable hook.

2 500.00

13 Microscope with mechanical Stage and oil immersion 2 500.00

14 Frontal writing lever - This lever is designed in such a way that the writing point rotates freely about its axle. This helps in reducing the tension between the smoked paper and the recording tip. The contraction are recorded as straight line

2 500.00

15 Fixit lever - the levers can be fixed to the spindle in the center p f which a vulcanite spindle on one of these pins lever fits, sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustment are made.

2 500.00

16 Colorimeters 1 500.00

17 Condon’s Drop Recorder-Palmer B-75 1 500.00

18 Jacquets graphic chronometer 1 500.00

19 Museum drugs specimen boxes rectangular, acrylic with cover. Sizes:- 9”x5”x4”(inch)& 6”x4”x3”(inch)

50 each 500.00

20 Microscope lamps - standard quality 2 500.00

21 Multimeter 1 500.00


22 Operating Table- JKA-172 : Suitable for Rabbits, Rats, Guinea Pigs and such like small animals. Top is of Stainless Steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers.

1 500.00

23 Instrument Trolley (30”X18”X30”) 1 500.00

24 Instrument Trolley( 48”X24”X30”) 1 500.00

25 Manometer mercury glass U-tube (5 mm bore , two vertical limbs 30 mm height half filled with mercury (upto 250 mm of Hg)

2 500.00

26 Tracheal cannula metal ( z-shaped & y- shaped)

2 each 500.00

27 Bull dog clip 10 500.00

28 Rat holder- single u and ring pattern 38 mm with Universal joint

2 500.00

29 Mercury manometer –Meriam, All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly, lapped to eliminate leakage and are fitted with feather weight stainless steel capillary. Standard Mercury Mercury Manometers: Without stopcock, with adjustable scale.

2 500.00

30 Autoclave electric-small 1 500.00

31 Sterilizer electric size 12”x8”x6” 1 500.00

32 Stimulator electronic Arthus Thomas- Selectable pulse per second in different steps and pulse with, continuous variable volt in multiple of 1 and 10 with internal, external and single pulse mode

1 500.00

33 Flame Photometer 1 500.00

34 Manometers

Mercury All Manometers are fabricated from true-bore

Borosilicate glass, floats are perfectly, lapped

to eliminate leakage and are fitted with

feather weight stainless steel capillary.

1 50


Standard Mercury Manometers: Without

stopcock, with adjustable scale.

35 Marey’s

Tambours Traditional (5cm to 10cm diameter) 2 50

36 Physiographs

with

transducers,

couples and

other relevant

accessories

(Earthing chord, chart paper, ink pen, ink

etc.) Recording system, amplifier, different

couplers like bio potential, EKG, strainage,

pulse respiration, temperature and isotonic

couplers, speed selection is easy and

instantaneous. Channel width is 70 mm, Ink

writing pen is 120 mm in length to minimize

arc distortion. Main Amplifier is fitted in the

console having switch selectable sensitivity

range from 50 microvolt per cm to 100 milli

volts per cm in eleven steps as

50,100,200,500 mv/cm and

1,2,5,10,20,50,100 mv/cm.

1 2000

37 Kymograph

(students)

Electrical

independent

unit

Electrically driven recording drums suitable

for use by students for general experiments. Drive mechanism consists of Constant speed

electric motor and accurate Gear-box contained in the base together with robust plate clutch. Engagement of various gear

ratios are effected by sliding the lever into the slot marked with surface speed or by a knob

in separate models. Main cylinder and Stainless Steel spindle have been standardized to make the same universal and

interchangeable. Double electric contact arms are clamped on the main spindle and a stout double-contact block is fitted on top of

23 4000


the base. Gear ratios i.e. 640 mm, 320 mm,

25mm, 12.5mm, 2.5mm, 1.2mm, 0.25mm, and 0.12mm per sec, are effected by sliding lever into the slot marked with 8-surface

speeds. Highly accurate speeds

Auto concentration curve (crc) mode and

normal mode.

Sturdy body

Corrosion resistant

Low power consumption

Audio and visual alarm

Easy height adjustment

Writing lever

Starling Heart Lever

Isometric Lever

Vibrating read, variable interrupter Time marking – tuning fork (100 hz), spring

time marker, electromagnetic time marker

38 Tracheal Canula

Metal Made of Brass with adjustable Air-vent.

Should be able to use for endo-tracheal

intubation of big animals like Dog & Cats

4 50

39 Weighing-

Machine for

small animals

like rats and

guinea pig

Animal weighing scale; Livestock scale: slip

proof-pan, waterproof-design, with railing and

door. High legs for rough ground

2 50

40 Weighing-

Machine for big

animals like

Animal weighing scale; Livestock scale: slip

proof-pan, waterproof-design, with railing and

door. High legs for rough ground

1 50


cats and dogs

41 Apparatus for

isolated rabbit

intestine

A Cylindrical copper bath with heating

element controlled by thermostat. Complete

unit with uprights, glass inner vessel and

oxygen tube with platinum tip frontal lever

from SS capillary tubing, fitted on teak base

board

25 4000

42 Animal trolley

with 12 cages

Fabricated from 1 square hollow pipe and

angel of S.S. 304 quality material. The racks

are mounted on four heavy duty 4, dia castors

for easy handling and quiet transportation.

Complete with argon arc joints and mirror

finish. Available to hold 24 animal cages of

size: 29X22X14 cms. (LXBXH). Rack size:

39X12X60 (LXBXH).

1 50

43 Dissection

Instruments Sets containing surgical standard scissors-2,

curved scissors-2, pointed scissors-2, artery

forceps-2, Mosquito artery forceps-2, scalpel

handle-2, plain forceps-2, toothed forceps-2,

small retractors-2 etc. Probes-2, hooks-2,.

To be supplied with proper cover and box.

1 50

44 Frog Boards ____________________ 25 50

45 Stop watches

Digital – Digital Stop Watch, Digital Stop

Watch is perfect for any laboratory

applications. The large LED display, high

resolution enhances the functionality in

several of situations. These are available in

two ranges as per specification. Range

6 50


1:99:59:59 Hrs:Min:Sec. Resolution: 1 sec

(for range 1) Min:Sec:Milisec. Range

2:99:59:99 Hrs: Min: Sec Resolution:

10milisec (for range 2) Display: 6 digit LED

Display Alarm: Buzzer after set time.

46 Chemical

balance-

ordinary

apothecary’s

Best quality with divided doors show case,

capacity 250 gms. Sensivity 1-2 mgm having

all stone agates fitted in open graduated beam

1 100

47 Pill tiles ______________ 30 100

48 Porcelin dishes ______________ 30 100

49 Pestle and

Morter

______________ 30 100

50 Iron spatula ______________ 30 100

51 Horn spatula ______________ 30 100

52 Galli

pot/ointment

pot

______________ 30 100

53 Glass rods ______________ 100 100

54 Plethysmograph

assorted High Resolution Volume.

Resolution: 0.01 ml, Accuracy+/-0.01ml. Easy to use pedal switch. LCD Graphic

Display

1 100


55 Antihistamine

chamber with

manometer

Should be a complete Histamine aerosol

apparatus having a acrylic box with nebulizer

sphygmomanometer and chloroform bellows

for assay of antihistamine drugs on guinea-

pig etc.

1 100

56 Actophotomete

r (activity cage)

The frame is equipped with 32 infrared

photocells, 16 placed in axis X and 16 placed

in axis Y. The Photocell work at a wavelength

of 950 nm and its information is multiplexed

at a rate of 40Hz. Hole board plate is

provided with 16 holes of diameter and

detection depth. It should contain

incorporated electric facility (variable) 0 to

100 volts for activating rats and indicating on

meter.cm

1 500

57 Rotarod

Assembly Should have 5 chambers, 75 mm width each with a rotating rod of 25mm diameter having

speeds of 5.10 to 15.20 and 25 r.p.m.

Digital rpm indicator and digital time

counters.

Each counter runs from the beginning of

the test until the animal falls from the drum to the lane.

Electronic change of speed from 4-120 rpm.

1 500

58 Electro

convulsiometer

Should be able to use for producing minimal

and supra minimal seizures required for

assaying of anti-epileptic and anticonvulsant

drugs. Should provide minimum 50Hz

stimulus current which can be adjusted

0.15mA to 330mA in steps, with one pain

1 1000


corneal electrode 4,6 or 8mm cups. And one

pair of ear clips work on 220 AC. Should

contain electronic timer device from 0.1 to 3

seconds in steps to control the stimulus

current and LED indicator for duration of

stimulus.

59 Analgesiometer

Thick pure aluminum plate (12mm) provides a very high temperature

stability and even surface distribution.

Plate temperature can be held at a set

point between above ambient to 70 degree C (+/-0.2 degree C).

A built-in timer activated by an external

foot switch allows the precise measurement of the reaction time (0.1

sec resolution).

Remote foot-switch controls the test

start/stop allowing rapid Hands-free experiments.

Provided with the calibration certificate of the

temperature indicator.

1 500

60 Cooke’s pole

climbing

apparatus

Should be having 2 (two) chambers, an outer

chamber made of thick plywood sheet with an

observation window and inner animal

chamber made of clear acrylic sheet with a

brass bar at the bottom. A built in shock of

200V AC, 50 Hz single phase with min of

0.2mA and is to be controlled by min of 11

position solid state timer up to 30 seconds.

Should be having output terminal for

kymograph recorder. Animal dropping tray to

1 1000


be provided to keep the equipment clean.

61 Metabolic cage

(diuretic study)

Classic metabolic cages with electronics to

monitor the receptacles for food and water.

Each may be removed without disturbing the

animal. Optional infrared beam arrays

(similar to those of the Activity Cages) can be

mounted on either side of the cage to monitor

coordinate activity and rearing behavious.

Each cage is comprised of interchangeable

parts which can be cleaned in a standard

vivarium wash station.

6 1000

62 Tablet

Disintegration

machine glass

tubing (length

of 6ft)

Hooper diameter of minimum 2”. Should be

fitted with min 4 steel hammers fixed to a disc

and Shaft being revolved at the speed of 3000

RPM. Rotation in vertical manner is made by

EHP Motor which carries a specially designed

Basket to hold 6 nos. of Tablets/Capsules

under specified weight, moving vertically in

temperature controlled glass vessels/Beakers

placed on Hot Plate. Having special type of

starter facility operatable on 220 volts AC

supply.

1 500


SL. NO.





EMD VALUE

QUOTED

(YES/NO)

DEPARTMENT OF ANESTHESIOLOGY (MANICKTALA)

1 Monitor for

Continuous Measurement of Cardiac Function

A. Monitor for Continuous Measurement of Cardiac Function:

1. It should be arterial line based continuous

monitoring device for Cardiac output, Cardiac

Index, Systemic Vascular Resistance and Stroke

Volume.

2. It must be supplied with good quality display

device and ten Flotrac and necessary catheter

system.

3. The device should be compatible with Flotrac

sensor system

4. Necessary accessories should be supplied for

systemic vascular resistance measurement

5. It must be CE and/or FDA certified

01 pc 14000.00

2 Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status

B. Monitor for continuous measurement of body tissue oxygenation and oxygen delivery status:

1. It should be auto-calibration based arterial-

venous line based measuring device to provide

continuous measurement of ScVO2, SvO2 , Extra

01 pc 8000.00


vascular Lung water index and Ejection fraction

as well as End Diastolic volume of heart

2. The monitor should be supplied with 10 (ten)

relevant and related sensors for measurement of

hemodynamic variables

3. Suitable display and storage device for data

should be supplied

4. It should be CE and/or FDA certified

3 Instant Hand held blood pH and Lactate monitor

D. Instant Hand held blood pH and Lactate monitor: 1. Portable, cartridge based hand held device

capable of measuring blood pH, Lactate and

other variables such as Troponin, Ionised

Calcium, Prothrombine Time, Creatinine Kinase-

MB and Brain Natriuretic Peptide

2. Measurements should be quantitative in nature

3. It should be supplied with wireless based printer

and electronic simulator for calibration

4. It must be FDA and/or CE certified

01 pc 6000.00

4 Lumber Puncture Simulator with Epidural block trainer

E. Lumber Puncture Simulator with Epidural block trainer:

1. The device should be a 3D image guided one

suitable for training of epidural needle insertion

2. It should be based on real time motion picture

based capturing system with display of procedure

on screen

3. The system should be capable of evaluation of

01 pc 16000.00


trainee’s performance

4. All relevant interfaces and accessories should be

supplied with the simulator


5 Spinal Injection

Trainer F. Spinal Injection Trainer:

1. Mounted trainer should be able to be used

multiple times

2. It should be supplied with three sets of

accessories like fluid bags and simulators

3. One vertebrae must be visible for proper

identification of performance site

4. Trainee should be able to be guided by

perceptible tissue resistance while going through

different levels of tissues


01 pc 2000.00


6 Central Venous Catheter Simulator

G. Central Venous Catheter Simulator: 1. Simulator should have life like anatomical

structures for identification of parts related to

central venous catheter insertion

2. It should allow trochar and guide wire insertion

for complete training

3. Device should be supplied with five replaceable

skin pads for each site of training

4. It should be supplied with all accessories like

artificial blood (two units), fluids, spare vessels

(two numbers), battery and other relevant items

5. Facility to check correct position of catheter

placement should be there


01 pc 8000.00

7 Cricotracheotomy trainer

H. Cricotracheotomy trainer: 1. It should be able to train routine as well as

percutaneous tracheotomy procedure

2. It should have easily palpable anatomical land

marks for identification of structures

3. Trainer must be steady in nature and should be

supplied with five sets of spare skin for

cricotracheotomy


01pc 2000.00

8 Peripheral Nerve Stimulator/ Locator

I. Peripheral Nerve Stimulator/ Locator: 1. The device should be able to locate nerves

03 pcs 5000.00


percutaneously through electrical stimulation

based technique

2. It should be able to be used with monopolar as

well as bipolar based stimulation technology

3. Current intensity preferably be between 0 to 60

mA and stimulating impulse upto 1ms

4. Should be able to measure and display actual

current passing through tissues

5. It must be supplied with insulated cannula , ten

in number each for size 22, 24 & 25 G as well as

re-chargble battery and charger.

6. Needle quality should be able to give best image

under ultrasound guided procedures

7. It should be FDA and/or CE certified

9 Multi-frequency

based deep heat generator

J. Multi-frequency based deep heat generator: 1. Equipment should be multi-frequency based

dual outlet heat generator using long waves with a emission frequency range between 450 to 500 KHz

2. It must have coupling system of capacitive and resistive therapy system for heat generation at different depth of application area

3. Electrode pairs and handle tips with various diameters such as 30,50 and 70 mm must be supplied with the equipment

4. Power must be 100 W/KOhm or more

01 pc 16000.00


5. It should be CE and / or FDA certified

10 Airway management Trainer:

K. Airway management Trainer: 1. Trainer must have good quality land marks of

upper airway and pulmonary structures for proper identification during intubation training.

2. It should allow various techniques of intubations and different methods of airway related activities like application of suction, Sellick’s maneuver, observation of pupil and carotid pulse palpation

3. It should be supplied with two sets of artificial lungs


01 pc 2000.00

11 Handheld instant hemoglobinometer with facility to measure Methaemoglobin

L. Handheld instant hemoglobinometer with facility to measure Methaemoglobin:

1. It should be able to be applied to patients of all

age groups and necessary probes/accessories to

be supplied in two in numbers for each age group

2. It should work even in low perfusion status and

should be least interfered by electrical

disturbances

3. It should be able to provide pulse variability

index, blood hemoglobin and methemoglobin

level non-invasively on continuous as well as

point of care basis

4. Perfusion index should be between o.o2 to 20%

5. Waveforms and/or digital display mode of

01 pc 4000.00


presentation


12 NUCLEOPLASTY

SYSTEM 1. It should work on principle of Co-ablation

2. It should work through generation of

bipolar Radiofrequency without requiring

grounding

3. Terminal end temperature generation

must not be above 70 degree C

4. It should be capable of being used in both

Lumber and Cervical region

5. Supplied probe must have depth

penetration marks and stop lock for safety

and control.

6. It must be supplied with 17G (6 inch) and

19G (3inch) accessory needles, 5

needles of each size. Respective size

Probe also to be supplied.

01 pc 30,000


SL. NO.





EMD VALUE

QUOTED

(YES/NO)

Department of Forensic Medicine(For ESI-PGIMSR, JOKA)

1 Clinical thermometer Traditional type 2 50

2 Stykar autopsy saw

with accessories Light weight equipment, 10 feet cord with hospital grade plug -should cut bone easily to minimise operator fatigue - Saw should be attached to HEPA bone dust collector.

2 100

SL. NO.





EMD VALUE

QUOTED

(YES/NO)

Department of Community Medicine (For ESI-PGIMSR, JOKA)

1 Horrock’s

Apparatus

(Complete set

with chemicals &

Manual)

_____________________ 01 pc 50


Dept. of Human Physiology

DEPARTMENT OF HUMAN PHYSIOLOGY

SL. NO.





EMD VALUE

QUOTED (YES/NO)

1 Audiometry Audiometry & Tympanometry in one instrument; potable - demo piece; special Audiometry window; MPANL (maximum permissible ambient noise level) specified internationally by standard institutes like OSHA and ANSI for proper acoustic treatment

1 6000.00


PLEASE QUOTE YOUR RATE. ANNEXURE –V

SHEET - I





Unit Cost (to be filled in by tenderers)

Total Amount (in figure)

Buy back rate(in figures)

Final amount after reducing buy back rate


Workstation (with multiparameter patient monitor)


a. The unit should have primary connection for central medical gas supply for O2, N2O and Air.

b. Provision for back up emergency supply through pin indexed O2 and N2O small cylinders.

c. Electronically controlled gas mixing and delivery system.

d. In case of O2 failure, the machine should automatically switch over to Air.

e. Audio visual alarm for O2 failure.

f. Accurate control of minimum 25% O2 in fresh gas (through sensitive oxygen ratio controller) up to flow of > 1 L/min, in presence of N2O. At least 250 mL/min of O2 for low flow and minimal flow

03 pcs


applications (fresh gas flow < 1 L/min).

g. Should be capable of accurate fresh gas delivery of up to 500 mL/min for minimal flow applications.

h. Ergonomically located integrated emergency O2 flush with self returning valve.

i. Should have single user-interface of at least 30 cm color display and electronic fresh gas doing for adult, child and neonate modes. The same user-interface should control and display all parameters including control of ventilator modes, display of pipeline and cylinder pressures, FiO2, ETCO2, airway pressures, tidal volume, minute ventilation, fresh gas flow, etc.

j. The user-interface should have configurable screen layouts for individual screen setups.

k. The machine should have fully automatic menu driven self test and user check list. In case of emergency machine startup, it should be possible to bypass the self test completely.

l. The system leak test should be done through the Y-piece of the circle system and should not require user interaction


during the test.

m. O2 safety flow adjustable from 0 – 12 L/min, through the vaporizer for emergency back up use.

n. Machine should also have an independent fresh gas outlet for connection to external circuit (Bain's circuit and Magill's circuit).

o. The machine should have a configurable nitrous-oxide-free operation (in case of necessity).

p. Fresh gas flow setting 50 mL/min to 12 L/min.

q. It should have the indicator to show the efficiency of fresh gas setting while used in low flow and minimal flow.

r. In the event of complete loss of external electric power and internal battery failure, it should be possible to manually ventilate the patient at 100% O2 and deliver anesthetic agent.

s. Major and critical components to be made of corrosion proof and durable metal alloy.


a. Electronically controlled, electrically


driven ventilator should not require any driving gas or pneumatic power for its operation.

b. Ventilator should be suitable to ventilate adult, child and neonate without changing ventilator bellows.

c. Ventilator should have fully automatic calculations and preset of patient specific ventilation settings based on ideal body weight of the patient.

d. Automatic breathing circuit compliance correction. Bellow should be enough light weight as not to offer any constant PEEP.

e. Modes of ventilation: Spontaneous ventilation, Manual ventilation, IPPV with plateau adjustment from 0 – 60 % of inspiratory time, PLV (pressure limited ventilation) with decelerating flow, Pressure controlled ventilation, SIMV-VCV, SIMV-PCV, Pressure Support (PS), PS with CPAP, PS with SIMV (CMV/PCV).

f. Should be upgradeable to Volume assured mode - autoflow – delivering set tidal volume at minimum airway pressure.

g. Peak inspiratory flow up to 150 LPM.


h. Tidal volume adjustments from 20 mL to 1400 mL (upgradeable to minimum 5 mL).

i. PEEP from 0 – 20 mbar, electronically adjustable.

j. Respiratory frequency 3 – 100 /min.

k. I:E ratio: 5:1 to I:99

l. Should have the capability to ventilate with atmospheric O2, in case of O2 and power failure.

3.Circle breathing system, Circle absorber:

a. Compact circle breathing system suitable for standard, low flow and minimal flow with minimum patient circuit volume including circle absorber (approx. 3 L, excluding reservoir bag) for fast response to change in fresh gas compensation.

b. Fresh gas decoupled / compensated breathing system for adult and children.

c. Integrated warmer in circle absorber for breathing gas conditioning and prevention of water condensation inside the circle system.

d. Breathing gas inlet and outlet of the


circle system should be fitted with reusable (autoclavable) bacterial-viral filter.

e. Should have facility of gas sampling from the breathing system.

f. Manual APL on circle system valve with direct setting of release pressure.

g. Easy to fit and change circle absorber canister of about 1.5 L capacity.

4. Vaporizers: a. Temperature and pressure

compensated and flow interdependent vaporizer for Sevoflurane (1 such) and Isoflurane (1 such).

b. Vaporizer should have extended delivery range from 0 – 6%.

c. Vaporizers must have selective interlocking safety mechanism to prevent simultaneous operation of two vaporizers.

d. Should have transport lock and provide hermetic sealing of agent chamber during transport and storage.


e. The vaporizer should require no calibration in its life cycle.

5. Safety features and alarms: a. The machine should have adjustable

alarm limits for all the parameters with auto set alarm function.

b. The machine should have automatic display of MAC/MACx values and automatic activation of low agent alarm

c. Airway pressure low limit should automatically change with PEEP setting changes.

d. Continuous monitoring and display of tidal volume, airway pressure, ETCO2, FiO2 (paramagnetic O2 sensor), anesthetic agent concentration (with automatic identification of anesthetic agent), lung compliance (VCV modes).

e. Graphic display of curves and loops with fast analysis of change in lung mechanics provided by simultaneous display of reference and real time loops.

f. Bar graph display of tidal volume (inspiratory and expiratory volume).


g. Trending for alarms and measured values with graphic trend display.

h. The machine should calculate agent compensation and agent uptake by patient on a case to case basis and display total fresh gas consumption in the electronic logbook of the machine.

6. Accessories to be provided: a. Should have at least 3 pc of RS232

connectivity port to communicate with patient monitor or HIS for automatic data transfer.

b. Pin indexed yokes for O2 and N2O (one each)

c. The machine should have externally-fitted water and moisture trapping chamber (large capacity) fitted to the medical air pipeline inlet.

d. Trolley with drawer.

e. Floor mounting with durable caster wheels with brake.

f. Writing surface.

g. Color coded and DISS coded pipeline connections and hoses for O2, N2O and Air.

h. Adult and Child breathing circuits


(autoclavable).

i. Anesthetic face masks (silicone, latex free).

j. Water traps and sampling lines for gas analyzer.

k. Semi closed breathing system for adult and child (latex free).

l. Cylinder key (2 such) chained to the machine, near the cylinder yokes.

m. User manual.


a. All the components of the of workstation (anesthesia gas delivery unit, vaporizer, ventilator, circle absorber and circle system), should be manufactured by the same agency to maintain uniformity of parts and efficient after sales service.

b. Authorization for standing by, terms of warranty & AMC & supply of spares for 7 years.

c. Physical demonstration of the quoted model is mandatory.

d. Must have CE certification (EN 60601-2-13) w.r.t the essential requirement for safety and performance of the anesthesia


workstation.

e. The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.

f. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.

g. Facility for good after sale & service with trained engineers posted in Kolkata.

Multi-parameter patient monitor (integrated with the anesthesia workstation) with the following technical specifications are required.

1.Parameters: a. Should be suitable for monitoring

adult, child and neonatal patients under anesthesia.

b. Should have minimum of ECG, SpO2, NIBP, 2 IBP, 2 Temperature as inbuilt standard parameters. All other parameters should be by


upgrades as pods or modules and software.

c. ECG: Five lead ECG monitoring with simultaneous display of three leads of ECG wave forms. Simultaneous display of twelve lead ECG waveform should be possible.

d. Respiration: Through impedance pneumography from ECG.

e. SpO2: Should have digital display, plethysmography, and tone modulation with change of

f. SpO2. Should be supplied with Masimo SET technology with compatible sensors for Adult, Child and Neonate.

g. NIBP: Oscillometric method of NIBP measurement with stepwise deflation. Adult, child, neonate preset modes. Compatible NIBP cuffs for Large adult, Adult, Child and Neonate. Should display systolic, diastolic, mean pressure in large, easy to read display. Measurement modes: automatic, manual and stat. Automatic mode adjustable intervals from 2 minute – 240 minutes and adjustable alarms.


h. IBP: Simultaneous monitoring of 2 IBP. Range – 50 to 400 mmHg.

i. Temperature: Simultaneous monitoring of two temperature: core and skin temperature.

j. Simultaneous monitoring of two IBP and one temperature should be possible.

a)User Interface:

a. Should be suitable for adult, child and neonatal monitoring.

b. Should have non-volatile memory for graphic and tabular trending of all monitored parameters as standard.

c. Should have event recall for minimum of 50 events, graphical and tabular trends, drug dose calculations, alarm logs, OxyCRG, oxygenation-ventilation and hemodynamic calculations as standard.

d. Should have arrhythmia detection including life threatening arrhythmias such as ventricular tachycardia, ventricular fibrillation, asystole, as standard feature.

e. Should have manual and automatic


setting of screen format.

f. Should have user selectable parameter priority and color selection for parameter on screen.

g. Should have excellent cable management with as minimum as possible cables at monitor and patient end for maximum user friendliness.

h. Should have facility for both wired and wireless networking.

i. Should have minimum eight channels of waveforms with minimum 8 inch display.

j. Cursor tool for vertical and horizontal cursors.

k. Should have web browsing facility to review each networked monitor through hospital LAN via PC in hospital LAN from remote location should be possible as future upgrade.

b)Optional upgrades/ modules (to be

quoted separately):

a. Neuromuscular monitoring module for monitoring neuromuscular


blockade.

b. Bispectral index module for monitoring depth of anesthesia.

c)Safety features:

a. Internal battery backup for minimum of 3 hours (Li-ion battery) to be provided.

b. CE and US FDA certification for the monitor as well as the individual parameter modules w.r.t the essential requirement for safety and performance of the monitor and accessories.

c. Should have defibrillator and ESU protection, ECG Synchronization, IABP interface (ECG and Arterial for triggering and deflation with a device delay of < 20 milliseconds.

d)Accessories:

a. 5/12 lead ECG cable.

b. SpO2 Masimo set finger sensor with extension cable for adult, child and neonate.

c. Temperature probes (2 pc).

d. NIBP Hose.

e. NIBP cuffs (large adult, adult, child,


neonate).

f. IBP reusable cable for 2 IBP and 10 pc disposable transducers.

g. BIS module and DSC cable..

h. NMT module and cable with acceleromyograph..

i. User manual.

e)Warranty and after-sales service:

a. All the components of multi-parameter patient monitor should be manufactured by the same agency to maintain uniformity of parts and efficient after sales service.


c. Physical demonstration of the quoted model is mandatory.

d. The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables


should also be quoted separately.

e. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.

f. Facility for good after sale & service with trained engineers posted in Kolkata.

2 Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control


Should be a mobile universal operating table with Direct motor driven adjustment of height, lateral tilt, Trendelenburg/anti-Trendelenburg.

It should be 100% oil free. Should have a longitudinal adjustment of

250 mm. Should have pneumatic spring support for

leg section and back section. Adjustment of the column functions should

be electrically Motorised via cable remote control

Should have additional operating panel with status indicators for tabletop orientation on column.

Should have built-in electronic interface to allow remote diagnosis and software updates via modem.

Should have maintenance-free battery, integrated in the column, which can be charged via a separate charging cable that also serves for direct mains operations if needed.

03 pcs




Completely X-ray translucent tabletop. Pads should be integrally foamed,

electrically conductive, soft and detachable, Velcro-free system for optimum hygiene and durability.


Should have foot switch for brake. Should have H – shaped base providing a

plenty of space for the surgical team's feet. Tabletop frame, column cladding, side rails

and running gear frame should be made from disinfectant-resistant, easy to clean stainless steel.




The systems should be quoted with following


General accessories :




1. Knee Arthroscopy adapter 2. Radial clamp 3. Leg holder 4. Side rail extension & adapter

5. The table should be USFDA, & CE and UL certified

6. It should be meeting international standards for medical and electrical safety standards;

3 Cardiac Biomarker

Analyzer (Card-based

Quantitative Assay):


a. The card-based portable Cardiac

Biomarker Analyzer should be able to

quantitatively measure the following

parameters: Troponin I, BNP, CK-MB,

Myoglobin, D-Dimer, using

Fluorescence Immunoassay

02 pcs


Technology.

b. The analyzer must be small in dimension

and portable system.

c. The analyzer must be easy to operate,

intuitive user interface, requiring

minimum technical training of the

operator.

d. The unit should operate on AC adapter

and also on inbuilt Li-ion battery backup.

e. The sample requirement must be less

than 300 micro liters for a given panel of

test.

f. The single-use test card should be self

contained with all the reagents, sensors

& calibrating solutions required for the

test.

g. The system should have inbuilt memory

capacity of at least 500 test results with

date and time.

h. Operating temperature range between 18

and 30 degree Celsius.

i. The system should be provided with an in-

built thermal printer.

j. The system should be able to interface with

HIS and LIS software.


k. Should have built in QC check facility

for the instrument.

l. Should be able to perform all the

quantitative tests of a single sample in

less than 20 minutes.

m. Should be US FDA certified and CE

marked for all the main equipment as

well as the accessories and kits used.

4 The Endoscope Drying Cabinet





4. Drying time = 120 minutes or less. 5. Storage time = 160 hours or more. 6. Power supply: 230V x 0.9 A, 50 Hz,

AC. 7. Power consumption should be less

than 150 watts. 8. Air supply: compressed air

pressurized medical grade dry air, internal pressure 3 – 8 bar, dew point = - 43 degree C.



11. Cabinet doors must be lockable, with user access control to prevent

02 pcs


unauthorized access.

5 ELECTRO SURGICAL UNIT


The Micro-processor based isolated Electro Surgical Unit should be compatible with Argon Coagulator system, designed for all kind of General Surgeries with both monopolarand bipolar modes. The following features are required 1. The unit should be entirely microprocessor

based. 2. Machine should have LED displays. 3. “Highest power efficiency rating” - have to

be within the range more than 97 %. 4. Real time tissue impedance monitoring

technology to deliver the selected power perfectly into a wide range of tissue types reducing thermal spread, RF interference and Neuro muscular stimulation and spark using feedback technology of sensing tissue types at a rate as high as 200 times in a second.




03 pcs





11. Numerical Error alarming system should be inbuilt.

12. With a single button on the machine, previous power setting can be recalled.

13. Should be type CF Equipment (IEC 601 – 1 & IEC 601-2-2) defibrillator proof.

14. Unit should be US FDA and CE certified 15. Facilitating under water procedures 16. Unit should have “Spray” mode with

Highest Crest Factor (in the range of 7-9) - (*Crest Factor as an indicator of a waveform's ability to coagulate bleeders without cutting effect.)




Input power source; Operating Range : 170-260 VAC Line Frequency : 50-60 Hz Minimum High Frequency Leakage Bipolar


Less than 60 mA Monopolar Less than 150 mA OUTPUT CHARACTERISTICS Highest Powers should be in the below ranges




OUTPUT WAVEFORMS :-


Monopolar Cutting Pure: 393 kHz sinusoid Blend: 393 kHz bursts of sinusoid recurring of 27 Khz intervals. 50% duty cycle envelope

Monopolar Coagulation: Dessication:- Low 1: 240 +-40 Khz sinusoid recurring at 39 Khz. 8% duty cycle Low 2: 393 kHz sinusoid Low 3: 393 kHz sinusoid Fulguration:- High 1: 470+-40KHz damped sinusoidal burstswith a


repetition frequency of 57 Khz High 2: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 30 Khz Spray:- 390 Khz damped sinusoidal bursts with a randomised repetition centered at 28 kHz. Frequency include 21 Khz ‹ f ‹ 35 KHz Output Is further modulated by a random 250 Hz envelope with a variable duty cycle Output power changes by ‹ 15% or 5 Watts, which ever is greater, as the line voltage varies from 90 – 135 volts and 186 – 264 volts (into a 300 ohm load)

6 Forced air warmer

Specifications for Forced air warmer 1.Forced air warmer for patient warming with adjustable automatic temperature control between 32 - 44 degree Celsius, in steps of 4 degree Celsius; with outlet hose temperature monitoring system. The warmer unit should have the system of securely mounting on any IV pole or bed rail. Non-tipping mounting pole, with caster wheels, and wire basket to be provided with each warmer unit.

03 pcs

7 Forced-air

(convective)

patient-warming system

Forced-air (convective) patient-warming

system Technical Specifications:

a) Servo-controlled forced–air (convective)

patient warming system, using

thermistors placed at hose end.

b) Hose end temperature range must be


increments (±1°C). c) Relative Average Noise Level at 1000 Hz

(front and back) must be less than 45

dBA.

d) Air Flow: 55 to 86 cubic feet/min.

e) Must have air filtration system with 0.2 micron filters.

5 (five)


f) Operating voltage 230V, 50Hz AC.

g) The components and accessories of the

convective patient warmer must conform

to the following Quality Standards: Product Safety (EN 60601-1, UL 2601-

1); Convective Warming Blanket

Flammability (NFPA 702, 16 CFR 1610);

EMC (EN 60601-1-2, FCC 47 CFR Part

15, Class B); Enclosure Protection (IEC

60529 IP Code: IPX1); Convective Warmers (ASTM F2196-02); Drop Test

Compliance (EN 60601-1), and must

have the US-FDA 510(k) certification.

8 Portable USG

equipment for

vascular imaging and regional

anesthesia

Portable USG equipment for vascular

imaging and regional anesthesia Technical Specifications: a) Portable ultrasound machine with multi-

frequency broadband linear array, curved array

and sector array transducers used for accurate

localization of peripheral nerves, nerve

plexuses, and epidural space during regional

anesthesia and also localization of peripheral and central veins and arteries for vascular

access.

b) Must have US FDA 510(k) certification for the

main equipment and accessories.

c) Must have the following Internationally approved safety features & components:

Electromechanical safety standards: EN 60601-

1:1997; EN 60601-1-1:2001; EN 60601-2-

37:2001 + Amendment A1:2005; CAN/CSA

C22.2, No. 601.1-M90; CEI/IEC 61157:1992;

UL 60601-1 EMC Standards: EN 60601-1-2:2007;

CISPR11:2004


1 (one)

9 Ambulatory PCA

pump

Ambulatory PCA pump Technical Specifications: a) Ambulatory microprocessor controlled

programmable patient controlled analgesia

(PCA) pump.


features & components: IEC/EN 60601-1, Class

10 (ten)


IIIb (according to Directive 93/42 EEC; EMC:

IEC/EN 60601-1-2/ 60601-2-24.

c) Must have US FDA 510(k) certification for the

main equipment and accessories.

10 Syringe infusion pump


a) Syringe infusion pump for continuous

precise delivery of intravenous drug infusions.


features & components: IEC/EN 60601-1, Class

IIIb (according to Directive 93/42 EEC; EMC: IEC/EN 60601-1-2/ 60601-2-24.

12 (twelve)

11 Volumetric

(piston) infusion

pump

Volumetric (piston) infusion pump Technical Specifications:

a) Volumetric infusion pump (piston

mechanism) for continuous accurate fluid

infusions, with ultrasonic, adjustable air bubble sensor.

b) Must have inbuilt re-chargable Li-ion battery

of at least 1600 mA.

c) Must have the following CE approved safety

features & components: ISO 9001:2000 AND

ISO 13485:2003 (in accordance with the Medical Devices Directive 93/42/EEC; Design

Standard: EN 60601-1 (safety) and IEC 601-1-2

(EMC); Electrical Safety Stabdards: EN 60601-

1, IEC 60601-2-24, IEC 60601-1-4.

4 (Four)

12 Single chamber

temporary cardiac pacemaker (VVI,

VOO, AAI, and AOO

modes)

Single chamber temporary cardiac

pacemaker (VVI, VOO, AAI, and AOO modes) Technical Specifications:

a) Single chamber temporary cardiac

pacemaker with VVI, VOO, AAI, and

AOO modes.

b) VVI (AAI) modes must be selectable with

and without acoustic signal. c) Pacing Rate: 30 to 180 ppm

d) Atrial Overdrive Pacing (RAP): 2X (60 to

360 ppm); 4X (120 to 720 ppm)

e) Output Amplitude: 0.3 to 12 V ± 5%

f) Pulse Width: 0.75 ms ± 0.02 ms g) Sensitivity: 1 to 20 mV, Asynchronous.

h) Refractory period: 250 ms

i) Battery Type: Should accept Standard 9 V,

2 (two)


Alkaline or Lithium batteries. Should

have economically long battery lifetime

of up to 30 days of operation with a

single 9 V Alkaline battery. j) Weight must be less than 200g (with

battery)

k) Connector Compatibility: Must accept

standard connector pins with diameters

ranging from 0.9 to 2.0 mm. Must

accept all standard myocardial heart wires and temporary pacing leads for


extension cable.

l) Protective cover must be present to

safeguard against accidental changes to settings.

m) Audible warning tone for low battery,

including low battery indicator must be

present.

n) Pacing run-away protection feature

must be present. o) Arm Strap must be supplied.

p) The equipment must conform to ISO

and CE stands for safety of operation

and quality. 13 Pressure Infuser

Bag (Reusable): 1

L & 0.5 L sizes


a) Heavy duty pressure cuff specially

designed for rapid infusion/pressurized

infusion of fluids.

b) Suitable for pressure up to 400 mm of Hg.

c) Transparent material to enhance the

visibility of the fluid transfer/flow.

d) Easy to use, hook-and-loop fastener

enables easy replacement of Infusion bag without removal of Pressure Cuff

from drip stand.

e) Instant venting through the three way

stop cock enables quick deflation of the

cuff.

f) Clear & precise pressure gauge facilitates

20 pc of 0.5 L size

10 pc of 1

L size


rapid & reliable pressure control.

g) Squeeze bulb is supple, faster & easier

to operate for fast inflation.

h) Must conform to BIS / CE safety standards.

14 Percutaneous

dilatation

tracheostomy kit

(incorporating the

Seldinger

technique and reusable

“Guidewire


Percutaneous dilatation tracheostomy kit

(incorporating the Seldinger technique and

reusable “Guidewire Dilating Forceps”) Technical Specifications:

a) Percutaneous dilatation tracheostomy kit

(incorporating the Seldinger technique and reusable “Guidewire Dilating Forceps”) with 7.0

mm ID cuffed tracheostomy tube.

b) Must have US-FDA and CE approved safety

features & components.

4 (Four)

15 Multimodal ICU

Ventilator

Multimodal ICU Ventilator Technical Specifications: a) Electric piston / turbine driven multimodal

ICU ventilator (Spont-PS, AC-VCV, AC-PCV,

SIMV-VCV, SIMV-PSV, Adaptive-BiPAP, PEEP,

invasive and non-invasive ventilation modes for

adult & pediatric patients.

b) Must conform to the following Standards & Safety Requirements: ISO 10651-2, ISO 10651-

3, ASTM F1100-90, IEC 60601-1, IEC 60601-1-

2, IEC 60601-2-12, UL 94 HB or better.

2 (Two)

16 Portable multi-

parameter patient

monitor

Portable multi-parameter patient monitor Technical Specifications:

a) Portable multi-parameter patient monitor with SpO2, ECG, NIBP, and Temperature, with

wireless LAN, and 3 h battery backup each

mounted on adjustable wall bracket.

b) Two (2) sets of standard accessories for ECG,

SpO2 (adult, pediatric, neonate), NIBP cuff &

hose (adult, pediatric, neonate), temperature probe,

c) Must have US-FDA and CE approved safety

features & components.

4 (Four)

17 Patient-transfer

slide-board

Patient-transfer slide-board Technical Specifications:

a) Patient-transfer slide-board for Operation Theater, (approx. dimensions: 1500 mm x 550

mm, L x W) made of lightweight & resilient

4 (Four)


radiolucent material of high impact tolerance,

good anti-static properties, maintenance-free

and easy to clean.


18 Adult half body basic CPR (BLS)

training Manikin


a) Half-body CPR (BLS) Training Manikin with

conforming to AHA (American Heart

Association) 2015 guideline for CPR and ECC.

b) Must be able to support the performance of opening the airway, artificial breathing and

external cardiac compression.

c) While performing artificial aspiration,

observable chest rise must be present.

d) External chest compression: feedback for correct compression dept (5-6 cm), correct

compression site with prompt correct buzzing

sound.

e) Excessive compression, prompt alarming

buzzing sound must be present.


g) Power: battery

2 (Two)

19 Adult advanced

CPR (ACLS)

training Manikin

with monitor & printer

Adult advanced CPR (ACLS) training Manikin

with monitor & printer: Technical Specifications:

a) Must combine the standards of the 2015 ACC-AHA & ECC guidelines, with up-

gradability to future revised guidelines.

b) Guide standards of implementation of

standards: the American Heart Association

(AHA), 2015 International cardiopulmonary

resuscitation (CPR) & Emergency Cardiovascular Care (ECC).

c) Anatomical features must be clear, feel real,

unified color, realistic shape, and aesthetic

appearance.

d) Must simulate vital signs: the initial state, analog mydriasis, the carotid artery pulsation.

e) After successful treatment, the simulated

human pupil must return to normal.


emergency call, pulse check, check breathing,

1 (one)


remove foreign bodies of five operations.



I) Modes of operations: CPR training, simulation, assessment and actual assessment.

j) CPR display functions:Electronically

monitored airway open and press parts.

Artificial respiration and external cardiac

compressions and the correct number and the

number of errors. 220V power supply.

k) Recording & Printer Features: Choice of

operating simultaneously print operation and

choice of operation after the resuscitation.

The printed transcript must cover covers the mode of operation, the sense of judgment,

rescue breathing, pulse check, check breathing,

remove foreign bodies, each cycle of operation

the number of compressions and blowing,

pressing the right / wrong number, press the

wrong reasons and frequency, inflatable the right / wrong reasons and frequency of blowing

the wrong reasons, set the time, operating time

and the evaluation.


l) RF remote control: The instructor can start by remote control CPR, stop, pupillary changes,

with or without pulse, printers, and other

functions. Can also sense of judgment,


remove foreign bodies to be recorded.

m) The material characteristics: face skin, neck skin, chest skin, hair from high quality, and

durable material and should not distort while

decontamination and disassembly.

20 Child advanced

CPR (ACLS)

training Manikin with monitor &

printer:

Child advanced CPR (ACLS) training Manikin

with monitor & printer: Technical Specifications: a) Must combine the standards of the 2015

ACC-AHA & ECC guidelines, with up-

gradability to future revised guidelines.

b) Guide standards of implementation of

1 (one)


standards: the American Heart Association

(AHA), 2015 International cardiopulmonary

resuscitation (CPR) & Emergency

Cardiovascular Care (ECC). c) Anatomical features must be clear, feel real,

unified color, realistic shape, and aesthetic

appearance.

d) Must simulate vital signs: the initial state,

analog mydriasis, the carotid artery pulsation.

e) After successful treatment, the simulated human pupil must return to normal.



remove foreign bodies of five operations.

g) Artificial respiration and heart functions. h) Airway open manuvers.

I) Modes of operations: CPR training,

simulation, assessment and actual assessment.

j) CPR display functions:Electronically

monitored airway open and press parts.

Artificial respiration and external cardiac compressions and the correct number and the

number of errors.

220V power supply.

k) Recording & Printer Features: Choice of

operating simultaneously print operation and choice of operation after the resuscitation.

The printed transcript must cover covers the

mode of operation, the sense of judgment,

rescue breathing, pulse check, check breathing,

remove foreign bodies, each cycle of operation

the number of compressions and blowing, pressing the right / wrong number, press the

wrong reasons and frequency, inflatable the

right / wrong reasons and frequency of blowing

the wrong reasons, set the time, operating time

and the evaluation. RF remote control functions:


remote control CPR, stop, pupillary changes,

with or without pulse, printers, and other

functions. Can also sense of judgment,

emergency call, pulse check, check breathing, remove foreign bodies to be recorded.


m) The material characteristics: face skin, neck

skin, chest skin, hair from high quality, and

durable material and should not distort while

decontamination and disassembly.

SL. NO.





Unit Cost (to be

filled in by

tenderers)

Total Amount

(in figure)

Buy back rate(i

n figures)

Final amount after reducing buy back

rate

DEPARTMENT. OF OBST. & GYNAE. ESI-PGIMSR, JOKA

1 Cardiotocographi

c fetal monitor

with Maternal

Monitor

Specification of Cardiotocographic fetal

monitor with Maternal Monitor.

Standard size colour TFT screen monitor

for display of wave forms and digital

Automatic fetal movement detection

facility in wave forms.

Standard twin pregnancy monitoring

system

Support for external thermal printer or ink

03 pcs


jet printer

Built- in rechargeable battery and AC/DC

power supply.


24 hours monitoring, data storage and

reload capacity.


measurement ability

Fetal heart base line beat to beat variation

and acceleration, deceleration analysis

capability.

Printing functions with paper for

documentation.

Automatic monitoring mode and

convenient operation by manual/digital

keys and rotary knob.

Light and auto-alarm ability complying

with international standard.


Maternal monitoring parameters may be

present in addition to fetal monitoring

system.


ECG

SPO2

NIBP

Respiratory rate

Temperature

Other parameters


Delivery Bed:

Overall size: 1880L X 900w X600-

800H mm.

Tubular Frame work mounted on

125 mm dia castor two with

breaks.

Three Section top made of MS pipe

with fixed cushioned mattress.

Height Adjustment preferably

Hydraulic height adjustment &

back section adjustment through

electric actuator system.

Trendlenburg/ Reverse

Trendlenburg Positions through

pneumatic pump.

Leg end section can slide under the

main section. Wheel lock system

must be present.

Provided with a pair of upholstery

lithonomy position.

02 pcs



Detachable SS Tray. 3 MICROSCOPE MICROSCOPE SPECIFICATIONS


Illumination:


Focusing:



Observation Tube:

Type: U-CBI30-2, Binocular U-CTR30-2, Trinocular

Field Number: 20 20

Tube inclination:


30°

48mm-75mm

30°

48mm-75mm



02 pcs


Stage:





Condenser:






4 Portable

Ultrasound

Machine

Specifications of Portable Ultrasound

Machine

1. The unit should be compact, light

weight, portable,sturdy and resistant to

break & damage..

2. It should be suitable for vascular

access (CVC placement,PICC) Nerve

blocks(Lower as well as upper

extremity),E-FAST examination, AAA

01 pc


Exam, small parts, applications in adults

and paed. patients and also suitable for

echocardiography & interventions.

Multiple preloaded applications presets

should be available for the above.

3. The unit must have real time

compound imaging for improved

contrast resolution & eliminating

ultrasound artifacts to achieve optimum

image quality.

4. The unit must have automatic gain

adjustment for B mode imaging

5. Scanning depth must be available up

to 35 cm.

6. System should support transducer

technologies like convex, linear and

phased array.

7. Imaging modes of real time 2D, color

Doppler, Pulsed wave Doppler,

Continuous wave Doppler and Power

Doppler must be available in all probes.

8. Simultaneous connectivity of at least

2 probes.

9. System must have fast start up to

scanning in less than 60 seconds as

essential in critical and emergency

situation in ICU, emergency & OT.


11. DICOM ready system with facility

to print along with printer, store, ready


to connect to PACS

12. Flat LCD/TFT monitor of at least

10” with flicker free image

13. Alphanumeric soft keys keyboard

with easy access scans controls, facility

to sanitize the system keyboard

14. to avoid cross contamination must

be available

15. Onboard storage of at least 10,000

images ,USB port for connectivity to

computer

16. Should be able to operate both on

AC and battery. Battery pack should be

self recharging and should last at least

for 2 hours when fully charged.

17. Transducers to be provide as

standard.

High frequency Linear transducer 6-

12 MHz with 60mm size for vascular

access, small parts, vascular,

muscuskeltal

interscalene,Supraclavicular,Axillary,Mu

sculocutaneus,Popliteal,Saphenous.


Convex transducer 2-5 MHz for deep

nerve access specially Celiac,Sciatic


applications.

Broad band phased array


transducer,1-5 MHz for accessing the

cardiac function & other related

application.

Needle guide must be supplied for

Linear & Convex probes along with 20

compatible needles with the unit.

18. System should be supplied with

trolley.


certification.

5 Digital Fetal

Doppler


Fetal doppler CE approved, with

blue blacklight for dark sight

Easy operation for everyone, over

10 years quality satisfaction

Tm-100B Fetal Doppler CE

Approved

Ultrasound frequency : 2.5+-

0.25Mhz

Ultrasound output power :

10mW/cmDC

Power supply:9.6V rechargeable

battery

Working environment temperature :

10-40

01 pc

6 COLPOSCOPE 01 pc


TECHNICAL SPECIFICATIONS

COLPOSCOPE

1. Should be a basic model with

binocular tubes with inter papillary

adjustment and vertical stand.

2. Should have a working range with fine

focus of minimum 40mm.

3. Should have a 12.5x or 13.5x or 15x

eye piece.

4. Should have a standard objective of

working distance between 250 to

300mm.

5. The vertical stand should have at

least 4 wheels and at least 2 of them

should have breaking facility.

6. The vertical joint should be rotatable

and should have vertical height

adjustment.

7. The head should be tiltable and

should have positioning handle.

8. Should use a halogen light source

with coaxial illumination.


SL. NO. NAME OF EQUIPMENT &

INSTRUMENT






Buy back

rate(in figures)




C-mount 1 Single Chip camera (Ex-stock) 1 Color TV (Ex-stock) 1


SLIT LAMP WITH MOTORIZED STAND Binocular Microscope Eye piece 10x16×25×40× Step magnification 8D compensation of ametropia Interpupilary adjustment : 50-80 mm Slit width: minimum 0-8 mm continuously adjustable Slit length: continuous from 8 mm to 1 mm minimum Slit angle : 0-180 degree continuous Slit Inclination: 5,10, 15,20 degree Filters: Blue, Red free , Grey & heat absorbing Bulb: Tungsten bulb Imaging facility

01pc

3 VISUAL FIELD

RECORDING

INSTRUMENT



Stimulus intensity 0.03 -10,000 Asb Stimulus Duration 0.1 – 9.98 secs

01 pc


Stimulus Wavelength Broadband visible light Maximum Bowl illumination 31.5 ASB GPA Software Testing features: Threshold Testing Library Central Field Testing Patterns: 30-2, 24-2, 10-2 Macula Peripheral Field Test Patterns: 60-4, Nasal Step Screening Test Library Central Field Patterns: C-40, C-64, C-76, C-80, C-Armaly Peripheral Field Test Patterns: P-60, DD-81, FF-120, FF-135, FF-246, FF-Armaly, Nasal Step Specialty Test Library Esterman monocular Esterman binocular Superior 36 Superior 64 Stimulous / background color White on white User defined test storage User features: Fixation Monitoring Heiji Krakau blind spot monitor Video eye monitor Trial lens Holder Remote video eye monitoring capability Operator interface Help Menu Touch screen on CRT Motorized chin rest Printer


Printex Thermal printer, table mounted Patient data input Name, Birth Date, ID, Trial Lens, VA, Pupil size IOP, C/D ratio, Diagnosis Code, Procedure Code, Comments

4 Flash Autoclave 1. Size: Minimum 20 Litre 2. Reservoir: 3 to 5 Litre 3. Tray: Minimum 3 in number 4. Air removal: vacuum pump 5. Total sterilization with vacuum dry:

shouldn’t take more than 30 min. 6. Exposure temperature: 121⁰ C/

134⁰ C 7. Fully automatic, microprocessor

controlled 8. Attached printer 9. European ‘B’ class certified

01 pc

5 PHACOEMULSIFI

ER Based on peristaltic pump

technology. o Crystal phaco hand

piece. o Multimode phaco

(Continuous / pulse / burst).

o Occlusion mode phaco. o Cool microincision phaco. o In phaco mode.



o Continuous irrigation facility. o Bipolar diathermy with

01 pc


selectable power. o High speed anterior

segment vitrectomy preferably with electric cutter.



INSTRUMENT








DEPARTMENT OF ANATOMY

REQUIREMENT OF LIST OF BONES: Technical Specifications:

1 Full skeleton 10 sets

2 Vertebral column 10 sets


4 Articulated pelvis 10 sets

5 Full Skeleton Loose bones 10 sets

6 Full Skull with mandible attached 10 sets

7 Full Skull without mandible 10 sets

8 Cut section of skull 10 sets



INSTRUMENT








REQUIREMENT OF ITEMS AND INSTRUMENTS Specifications

9 Tanks(portable)-STEEL(Accommodate at least 3 complete human bodies)

6 pcs

10 Student microscopes (Light) 50pcs

11 Revolving stools(Steel) 250 pcs

12 Dissection tables(full size) 15 pcs

13 Dissection tables(small size) 6 pcs

14 Student lockers 100 pcs

15 Full model human male and female (detachable)- Vinyl model

1 set each





Unit Cost (to be filled in by

tenderers)

Total Amount (in

figure)



Laminated Histology Charts and models and viscerae and Slides- provided separately MODELS/CHARTS FOR MUSEUM: Specifications

16 Full skeleton 3 sets 17 Vertebral column 3 sets



19 Articulated pelvis 3 sets 20 Full Skeleton Loose bones 3 sets

21 Cardiac muscle 1 set 22 Skeletal muscle 1 set

23 Smooth muscle 1 set

24 Compact bone 1 set 25 Spongy bone 1 set

26 Spleen 1 set 27 Lymph node 1 set

28 Tonsil 1 set

29 Thymus 1 set 30 Trachea 1 set

31 Lung 1 set 32 Submandibular gland 1 set

33 Sublingual gland 1 set 34 Parotid gland 1 set

35 Tongue 1 set

36 Esophagus 1 set 37 Stomach(body) 1 set

38 Stomach (pylorus) 1 set 39 Liver 1 set

40 Pancreas 1 set

41 Duodenum 1 set 42 Jejunum 1 set

43 Ileum 1 set 44 Large intestine 1 set

45 Cecum with APPENDIX 1 set 46 Gall bladder 1 set


47 Kidney 1 set

48 Ureter 1 set 49 URINARY BLADDER with prostate 1 set

50 TESTIS with vas deferens 1 set 51 Ovary 1 set

52 UTERUS with uterine tube 1 set

53 Vagina 1 set 54 Thyroid 1 set

55 Suprarenal gland 1 set 56 Pituitary gland 1 set

57 Skin 1 set

58 Mammary gland 1 set 59 Spinal cord 1 set

60 Cerebrum 1 set 61 Cerebellum 1 set

62 Eye 1 set 63 Placenta 1 set

64 Umbilical cord 1 set

65 Ear 1 set 66 Tongue 1 set

67 Zona pellucida 1 set 68 Morula 1 set

69 Blastocyst 1 set

70 Sperm 1 set 71 Ovum-matured 1 set

72 Ovum-immatured 1 set 73 Placenta 1 set

74 Placental barrier 1 set 75 Turner syndrome 1 set


76 Kleinfelter syndrome 1 set

77 Fallot’s tetralogy 1 set 78 Velamentous placenta 1 set

79 Battledore placenta 1 set 80 Trilaminar germ disc 1 set

81 Bilaminar germ disc 1 set

82 Developing notochord 1 set 83 Neural tube defects 1 set

84 Physiological hernia 1 set 85 Developing foregut 1 set

86 Developing midgut 1 set

87 Developing hndgut 1 set 88 Devleoping heart 1 set

89 Descent of testis 1 set 90 Developing kidney 1 set

91 Anatomy of pouch of douglas 1 set 92 Developing male reproductive system 1 set

93 Developing female reproductive system 1 set

94 Developing brain 1 set 95 Developing tongue 1 set

96 Developing eye 1 set 97 Developing lens 1 set

98 Devloping inner ear 1 set

99 Developing pinna 1 set 100 Middle ear 1 set

101 Semicircular canals 1 set 102 Long bone of child showing blood supply 1 set

103 Long bone of adult showing blood supplyand ossification

1 set


104 Developing pituitary 1 set

105 Developing suprarenal 1 set 106 Neural crest cells and derivatives 1 set

107 Karyotyping 1 set 108 Development of diaphragm 1 set

109 Development of liver 1 set

110 Developmnt of spleen 1 set 111 Development of lungs 1 set

112 Bifurcaion of trachea 1 set 113 Larynx 1 set

114 Pharynx 1 set

115 Mandible 1 set LIST OF VISCERAE TO BE PROVIDED FOR MUSEUM DISPLAY PURPOSE IN GLASS VESSELS (MOUNTED) THORAX (MUSEUM)

116 Right lung 2 pcs

117 Left lung 2 pcs

118 Heart 2 pcs

119 Heart with pericardium 2 pcs

120 Trachea with oesophagus 2 pcs

121 Trachea 2 pcs

122 Diaphragm 3 pcs

ABDOMEN, PELVIS & PERINEUM (MUSEUM) 123 Liver 2 pcs

124 Kidney –right and left 4 each


125 Kidney (both) + urinary bladder 1pc

126 Spleen 4 pcs

127 Duodenum + pancreas + spleen 3 pcs

128 Stomach 4 pcs

129 Jejunum + ileum 3 pcs

130 Caecum with appendix 3 pcs

131 Rectum + anal canal 3 pcs

132 Small intestine 3 pcs

133 Large intestine 3 pcs

134 Male composite viscera 2 pcs

135 Female composite viscera 2 pcs

136 Urinary bladder with prostate gland 2 pcs

137 Urinary bladder 2 pcs

138 Testis right and left 4each

139 Perineum male 1 pc

140 Perineum female 1pc

BRAIN & SPINAL CORD(MUSEUM)

141 Spinal cord 4pcs


142 Meninges 3 pcs

143 Whole brain (both the hemispheres) 2pcs

144 Cerebrum - half brain (one hemisphere) 2 each

145 Cerebellum 3pcs

146 Cerebellum + brain stem 3 pcs

147 Brainstem 2 pcs

148 Cerebrum with brain stem 2 pcs

HEAD & NECK(MUSEUM) 149 Sagittal section

(showing pns, pharynx, larynx & nasal cavity)

3 each

150 Eyeball 12 pcs

151 Eyeball sagittal section 4 pcs

152 Eyeball coronal section 4 pcs

153 Lens 4 pcs

154 Thyroid gland with isthmus 3 pcs

155 Composite viscera (tongue + larynx+ pharynx)

4 sets

LIMBS (MUSEUM) 156 Axilla with arm 2 pcs

157 Cubital fossa 2 pcs

158 Palm 2 pcs


159 Wrist 2 pcs

160 Complete upper limb 3 pcs

161 Complete lower limb 3 pcs

162 Ts forearm 2 pcs

163 Ts arm 2pcs

164 Femoral triangle with back of thigh 2 pcs

165 Leg with foot 2 pcs

166 Ts thigh 2 pcs

167 Ts leg 2 pcs

SLIDE SETS REQUIRED 168 Cardiac muscle 50 sets

169 Skeletal muscle 50 sets 170 Smooth muscle 50 sets

171 Ts- compact bone 50 sets 172 Ts-spongy bone 50 sets

173 Hyaline cartilage 50 sets 174 Elastic cartilage. 50 sets

175 Fibro cartilage 50 sets

176 Artery 50 sets 177 Vein 50 sets

178 Spleen 50 sets 179 Lymph node 50 sets

180 Tonsil 50 sets

181 Thymus 50 sets


182 Trachea 50 sets

183 Lung 50 sets 184 Submandibular gland 50 sets

185 Sublingual gland 50 sets

186 Parotid gland 50 sets 187 Tongue 50 sets

188 Esophagus 50 sets

189 Stomach(body) 50 sets 190 Stomach (fundus) 50 sets

191 Stomach (pylorus) 50 sets 192 Liver 50 sets

193 Pancreas 50 sets

194 Duodenum 50 sets 195 Jejunum 50 sets

196 Ileum 50 sets 197 Submandibular gland 50 sets

198 Appendix 50 sets 199 Gall bladder 50 sets

200 Kidney 50 sets

201 Ureter 50 sets 202 Urinary bladder 50 sets

203 Testis 50 sets 204 Vas deferens 50 sets

205 Prostate 50 sets

206 Ovary 50 sets 207 Uterine tube 50 sets

208 Uterus 50 sets 209 Vagina 50 sets

210 Thyroid 50 sets


211 Suprarenal gland 50 sets

212 Pituitary gland 50 sets 213 Skin ls (thick) 50 sets

214 Skin (thin) 50 sets 215 Mammary gland (active) 50 sets

216 Mammary gland (inactive) 50 sets

217 Spinal cord 50 sets 218 Cerebrum 50 sets

219 Cerebellum 50 sets 220 Retina 50 sets

221 Cornea 50 sets

222 Placenta 50 sets 223 Umbilical cord 50 sets

224 Tongue 50 sets


225 CADAVER


CADAVER STORAGE TANKS (Full SS)

(Accommodate full human cadavers- at least 2 in each tank) Specification

1. OVER ALL SIZE: 72” (L) x 60” (W)

x 24” (H) WITH CASTER




HANDLE-6.





06 pcs


SL. NO. NAME OF

EQUIPMENT & INSTRUMENT





Total Amount

(in figure)



Department of Orthopedics 1 Prone position head rest (gel padded), dimensions:

280 x 240 X 140 mm adult size

01 pc

2 Universal patient positioner (gel padded) large, 380 X 140 X 80 mm for shoulder, lateral torso and under knees support adult size

02 pcs

3 Dome shape flat bottom gel positoner, large 510 x 150 X 125 mm (semicircular cushion positioner) for chest, pelvis and leg support in prone position, adult size.

02 pcs



720p, 1080i, 1080p Selectable Multiple digital outputs (HD & SD Outputs) Light source communication Electronic zoom (in p-modes only) Autoclavable Camera Head Shockflex prism mounting Resolution 1920X1080p, Light up card edge receptable Progressive scanning, Aspect ratio 16:9 2 Camera Head Buttons for 4 Remote

Fuctions 300W Xenon Light Source- 1 No

Automatically adjust to optimal light intensity

Auto Bulb saver function Stand by Mode

01 set


Homogenized Light distribution Light Guide Locking Mechanism OLED Window


24 '' or More Fully High Definition Monitor Fully compatible with HD and Digital

peripherals Sealed front panel in light-weight design with





Shaver Console 230 Volt Capacity to recognize the Hand piece, display

of speed The console should have option for

connecting Large Bone Drill & Saw Handpiece.

Shaver Hand Piece-1 No

500- 12,000rpm, 500- 2,500 cpm, Single and Multi-turn


Oscillate Chuck for small drilling (for shoulder anchors etc) -1 No

Shaver Hand Piece should adapt the chuck Cutters






Easy to setup and use. Flow not less than 2 lt / min. Pressure ranging 30 - 150 mmHg Weight should not more than 7 lbs System should be supplied with auclavable

remote control Inflow / out flow tubing set-10 Nos Arthroscopy Trolley(Indian)-1 No



5 C-ARM MACHINE (IMMAGE INTENSIFIER)




All operation on control panel k-board. Microprocessor based control with feather

touch panel. Generator unisearch IMD unit. Excellent fluoroscopy. Radiography output 25mA. On requirement Fluoroscopy: foot switch & on the control

panel. Kvp variation of 40 -110kvp. 3 step mode selection, normal (LIH), PULSE

and LIVE control. Digital kvp metering display. Digital ma metering display. Foot switch.


Duel focus having 0.6mmand 1.8mm focus. Anode heat storage capacity 30kj. Anode cooling rate250 w/hr. Type of Generator – khz hf X-Ray Tube - Fluro 0.6mm X 0.6mm Focal Spot - 1.5mm X 1.5mm Fluro / Radio KVP - 40-110kvp Fluro mA - 0-4 mA Fluro Timer - 5 Minute

01 set


MAS - Up to 200 Power Requirement - 220V/50-60 hz & 3.5

kw Image Intensifier - 9 Inch

C-ARM FEATURE Rotation

360Degree Source to II Distance

90Cms Arc orbital Movements

110Degree Pann movements 0-

25Degree Horizontal Travel 22

cms Vertical motorized movement 32cms Detachable Cassette Holder (Option) 10” x




6 Orthop

aedic Electric Drill System

Orthopaedic Electric Drill System:

04 pcs( against condemnation of Battery Operated Drill)





Drill Chuck Adaptor with Jacob’s Stainless Steel Chuck (USA)

Pistol Grip Sagital Saw (Set of five blades) Flexible Reamers (2 pieces with reaming

pieces 6mm – 13mm)

7 DIGITAL ELECTRONIC TOURNIQUET


Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of set

point. Online Setting: Increase and decrease in

pressure settings Timer: Timer range from 9hours to


1minute/Internal 1/1000 second. Alarm & Display Indication:-

When set pressure is over When pressure goes 25mmHg

above set pressure. When pressure goes 25mmHg

below set pressure. In battery mode, when battery

voltage reaches 9V.

04 pcs


Memory: Pressure set in earlier session is stored and displayed, when machine is switched on again.





Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—

washable & easy fitting (Paediatric, small, medium, big & large).


8 SMALL

FRAGEMENT INSTRUMENT SET


i. Drill Bit Q.C.End 2.5mm Dia—115mm

Length—2Pcs.,

ii. Drill Bit Q.C.End 3.2mm Dia—130mm

Length—2Pcs.,

iii. Counter Sink—6mm Head—1Pc.,

iv. Quick Coupling Handle—T-Type—1Pc.,

v. Tap with T-Handle for 3.5mm Cortical

Screw—2Pcs.,

vi. Tap with T-Handle for 4.0mm Cancellous

03 sets


Screw—2Pcs.,

vii. Drill & Tap Sleeve combined 2.5/3.5mm—

1Pc.,

viii. Insert Drill Sleeve 2.5mm—1Pc.,

ix. Screw Driver Shaft Q.C.End ---2.5mm Tip—

1Pc.,

x. Hexagonal Screw Driver 2.5mm tip—1Pc.,

xi. Small Depth Gauge—1Pc., Sharp Hook—

1Pc.,

xii. Small Neutral & Loaded Drill Guide—1Pc.,

xiii. Spanner—11mm—1Pc.,

xiv. Small Plate Bender—pair—1Pair.,

xv. Plier Cum Wire Bender—1Pc.,

xvi. K-Wire Bender—1Pc.,

xvii. Reduction Forceps—Serartted---Ratchet


xviii. Reduction Forceps—Pointed---Ratchet


xix. Self Centering Bone Holding Forceps—

190mm—1Pc.,

xx. Hohmann Retractor 8mm wide, short narrow


xxi. Hohmann Retractor 15mm wide, 160mm

Length—2Pcs..,

xxii. Periosteal Elevator ---Straight—160mm



xxiii. Instrument Box with two trays length 300mm—1Pc.



i. Drill Bit Q.C.End 3.2mm Dia—130mm

Length—3 Pcs.,

ii. Drill Bit Q.C.End 4.5mm Dia—130mm

Length—1Pc.,



v. Tap with T-Handle for 4.5mm Cortical

Screw—2Pcs.,

vi. Tap with T-Handle for 6.5mm Cancellous

Screw—1Pc.,

vii. Insert Drill Sleeve 3.2mm—1Pc.,

viii. Drill & Tap Sleeve combined 3.2/4.5mm —

1Pc.,

ix. Drill & Tap Sleeve combined 3.2/6.5mm—

1Pc.,

x. Screw Driver Shaft Q.C.End ---3.5mm Tip—

1Pc.,

xi. Large Hexagonal Screw Driver 3.5mm tip—

1Pc.,

xii. Large Depth Gauge—1Pc.,

03 sets


xiii. Sharp Hook—1Pc.,Spanner—11mm—1Pc.,

xiv. Large Neutral & Loaded Drill Guide—1Pc.,

xv. Pointed Drill Guide with 4.5mm Tap Sleeve

& 3.2mm Drill Sleeve—1Pc.,

xvi. Large Plate Bender—pair—1Pair.,

xvii. Instrument Box with two trays length

300mm—1Pc.

10 BASIC

INSTRUMENT SET


i. Universal Open Hand Drill –2Pcs.,

ii. Wire Tightner Cum Wire Twister—1Pc.,

iii. Guide Wire Introducer with Four Pegs—1

Pc.,

iv. Plier Cum Wire Bender Cum Wire Cutter

–9” –1Pc.,

v. Wire Cutter Double Action Length

250mmm-1Pc.,

vi. Self Centering Bone Holding Forceps

150mm—1 Pair,

vii. Self Centering Bone Holding Forceps

240mm—1 Pair,

viii. Self Centering Bone Holding Forceps

280mm—1 Pair,

ix. Reduction Forceps –Serrated—Speed

03 sets


Lock—170mm—2 Pair,

x. Reduction Forceps –Serrated—Speed


xi. Reduction Forceps –Serrated—Speed


xii. Pattela Bone Holding Forceps –Four

Prongs—1 Pc.,

xiii. Lane Bone Holding Forcep with Ratchet

200mm—2 Pc.,

xiv. Lane Bone Holding Forcep with Ratchet

170mm—2 Pc.,

xv. Lane Bone Holding Forcep with Ratchet

200mm—2 Pc.,

xvi. Bone Cutting Forceps (Straight) Double


xvii. Bone Cutting Forceps (Straight) Double


xviii. Bone Cutting Forceps (Curved) Double


xix. Bone Cutting Forceps (Curved) Double


xx. Chisel with Fibre Handles 5,10,20,30mm -

-- 1 Pc. Each.

xxi. Osteotome with Fibre Handle Straight

5.10.14.16.20mm—1 Pc. Each.


xxii. Osteotome with Fibre Handle Curved

5.10.14.16.20mm—1 Pc. Each

xxiii. Bone Currette Double ended 4mmx6mm –

2Pcs.

xxiv. Bone Currette Double ended 6mmx9mm –

2Pcs.

xxv. Langenback Retractor---Small—1Pc.

xxvi. Langenback Retractor---Large—1Pc.

xxvii. Bristow Retractor---1Pc.

xxviii. Self Retaining Retractor—Small—2 pcs.

xxix. Self Retaining Retractor—Medium—2

pcs.

xxx. Self Retaining Retractor—Large—1 pc.

xxxi. Periosteal Elevator Curved—6,10,14,20---

1 Pc. Each

xxxii. Bone Hammer 200,350,500gms--- 1 pc. Each




Clamp, clip-on self-holding, MR-safe Aperture for rods 11 mm Schanz screw 5mm with lengths 125 – 200

mm All instruments must be enclosed in a

Vario with lid with an insert for Schanz

03 sets


Screws The instruments should have Combination

Wrench of diameter 11.0mm The instruments should have Socket

Wrench of diameter 11.0mm,cannulated The instruments should have Combination

Clamp, clip-on, self-holding, MR-safe The instruments should have Clamp, clip-

on, self-holding, MR-safe The instruments should have Universal

Chuck with T-Handle The instruments should have Adapter for

Seldrill™ Schanz Screw with diameter 5.0 mm

The instruments should have Compressor, open








The instruments should have Connecting Rod 5.0 mm, length 150 mm, Stainless Steel

12 Mediu

m Medium External Fixator

Rod of dia 8 mm in 03 sets


External Fixator


Clamp, clip-on self-holding, MR-safe Aperture for rods 8 mm Schanz screw 4mm & 5 mm with lengths

80 – 175 mm All instruments must be enclosed in a

Vario with lid with an insert for Schanz Screws

The instruments should have Combination Wrench with diameter 8.0 mm

The instruments should have Wrench, hexagonal with diameter 3.5 mm with T-Handle

The instruments should have Combination Clamp, medium, clip-on, self-holding, MR-safe

The instruments should have Clamp, medium, clip-on, self-holding, MR-safe

The instruments should have Drill Sleeve 4.0/2.5



The instruments should have Universal Chuck, small, with T-Handle





The instruments should have Short Drill


Sleeve 5.0/3.5 The instruments should have Long Drill

Sleeve 5.0/3.5 The instruments should have Short

Threaded Drill Sleeve 6.0/5.0 The instruments should have Threaded

Drill Sleeve 4.0 The instruments should have Long

Threaded Drill Sleeve 6.0/5.0

13 Portable X-Ray Machine



RADIOGRAPHIC OUTPUT – mA Max mAs KV 50 250 45-55 40 200 60-75 30 150 80-85

KV SELECTOR – Select KV from 45 to 85 KV in 5 steps each

SUPPLY VOLTAGE COMPENSATOR – Adjust supply voltage from 180 v to 250 v automatically

LIGHT BEAM DIAPHRAGM Electronic DISPLAY – Digital display of mA

, KVp & mAs OVERLOAD PROTECTOR IN BUILT mAs SELECTOR up to 250 mAs


01 pc


SL. NO.






Total Amount (in

figure)



PHYSIOTHERAPY DEPARTMENT

1 T.E.N.S Therapy unit


01pc


Shortwave diathermy atleast 400 watt(micro processor controlled) 1)High performance solid state generator with digital display. 2)High performance multi jointed arm 3)Continuous & pulsed mode(allows thermal & non thermal treatment) 4)Patient safety switch. 5)Must have CE certified. 6)Safety standard class 1 7)Captive & inductive applicator. 8)Frequency 27.12 Mhz 9)Must have disc electrode with adjustable arm.

01 pc


10)Pad electrodes for larger ,smaller & irregular surface area(small sinus electrode preferable) 11)Strap & other standard accessory preferable(knee jt,low back, upper back.)


3 Suspension frame


01pc



01pc



01pc


Parallel bar adult (height adjustable) 01pc

7 Static cycle


01pc


Complex exerciser unit should have suitable for shoulder elbow chest abdomen and lower limb exercise should be gradeable and adjustable for resistance foam padded table top on tubular frame the unit should be dimension 185-195 X 70-80 cm wide and the height should be 80 -85 cm complete unit consist of one table pan assembly and following attachement - ankle, hip, wrist,knee,abdominal and back

01pc


exerciser it should include strap, harness,and over head pulley systems different iron weight plates starting from 0.25 kg and 1 kg total upto 30 kg pelvic rest 1 quadriceps rest 1 supination pronation wheel 1 wooden cabinet for storage



01pc

OCCUPATIONAL THERAPY

10 Fluidotherapy

Fluidotherapy it should be used for double extrimity simaltaneously operated in pulse or continious mode treatment time adustable adustable air speed machine should mounted with wheel or trolley safety standard class 1 digital display should have dry heat media (cellulose particles) with the machine as accessories

01pc




Finger Goniometer 01pc

12 Goniometer

Goniometer 01pc

13 Peg board Peg board 01pc


Wrist circumductor 01pc

15 Grip exerciser

Grip exerciser 01pc

16 Finger exerciser Table

Finger exerciser Table 01pc


Finger dexterity board 01pc


Hand Gym kit board 01pc


19 Over head pulley

Over head pulley 01pc


Inclined sanding board 01pc

21 Horizontal sanding

Horizontal sanding board 01pc


board

22 Shoulder wheel

Shoulder wheel 01pc

23 Balance board

Balance board 01pc


Foot placement ladder 01pc

25 Bolster set

Bolster set 01pc

26 Wedge board set

Wedge board set 01pc

27 Quadriceps table

Quadriceps table 01pc

28 Stand in frame

Stand in frame 01pc

29 Trampoline

Trampoline 01pc

30 ADL training kit

ADL training kit 01pc


Low rise exercise platform 01pc

32 Cp prone stander

Cp prone stander 01pc

33 Cp chair Cp chair 01pc

34 Wheel Wheel chair for transfer training 01pc


chair for transfer training


Multiple gym exerciser 01pc

Department of Orthopaedic (ESI Hospital , Manicktala)

1 DIGITAL ELECTRONIC TOURNIQUET:-

Cuff pressure range: 10 to

450mmHg. Pressure regulation: +/- 10mmHG

of set point. Online Setting: Increase and

decrease in pressure settings Timer: Timer range from 9hours to


1minute/Internal 1/1000 second. Alarm & Display Indication:- When set pressure is over When pressure goes 25mmHg above

set pressure. When pressure goes 25mmHg below

set pressure. In battery mode, when battery voltage

reaches 9V. Memory: Pressure set in earlier

2 sets


session is stored and displayed, when machine is switched on again.





Stabilizer: Inbuilt. Cuffs: Different Sizes of five

cuffs—washable & easy fitting (Paediatric, small, medium, big & large).


2 Titanium

Elastic Nails

instrument set





The implant should be available in titanium

01 set


alloy (Ti-6AI-7Nb) that gives mechanical stability and elastic property.












The system should have an F-Tool The system should have an Awl that is curved

and has a sharp tip. The system should have an Extraction Pliers

with thread for TEN The system should have a Cutting Pliers for

TEN The system should have a Hammer Guide The system should have an Inserter The system should have a SYNCASE Silicone


Mat 170 x 460 mm The system should have a Lid for no. 675.420 The system should have a Tray, bottom, for


Instruments for 675.420 The system should have a Tray, top, for

Implants for no. 675.420 The system should have a SYNCASE Basic

Tray, height 145mm, neutral The system should have a Transport Case for

Syncase 3 Collinear

Reduction Clamp




The system should have a reduction attachment for reduction against LCP plates for both large and small fragment plates which can be mounted

01 set


on the tip of feed rod. The system should also have a reduction

attachment for reduction against LCP/ LC - DCP plates and for reduction against the bone which can be mounted on the tip of feed rod.



4 PULSE LAVAG

E SYSTE

M


controlled. 2. Autoclavable & reusable tubes of

medical grade silicon. 3. Complete Sterility is maintained. 4. Easy loading of the tube in the

machine. 5. Efficient peristaltic pump. 6. Water Resistance Display. 7. Foot control operate machine. 8. Pre Set features. 9. Four types of irrigation possible. 10. Inbuilt fuse and voltage control

rectifier. 11. Power Supply 230 V AC 50 Hz ± 10%

02 sets


12. Stainless Steel Body

SL. NO.






Total Amount (in

figure)



Department of Pathology & Central Research Laboratory (for ESI PGIMSR, Manicktala)

1 CRYOSTA

T CRYOSTAT

1. Freely standing cryostat with chamber temperature down to -35°C. Actively cooled quick freeze shelf with optional 2 station Peltier unit for freezing down to -40°C with Specimen storage shelf to store up to 8 chucks.

2. Maintenance free microtome with section

thickness setting preferably from 1 to 100 µm. 3. Equipment must be suitable for sectioning of


4. Vertical Specimen Stroke length: 56 mm or

above, Horizontal Specimen feed: Approx. 25 mm

5. Provision must be available for Motorized

(preferably at 600 μm/s &900 μm/s. – as rapid & slow respectively) coarse feed . Machine should have the Trimming facility via motorized coarse feed.

6. Blade holder system to hold both high profile &

low profile blade preferably simultaneously.

01 pc


Disposable Blade holder system must be provided with lateral displacement and integrated glass anti-roll guide.





11 Specimen retraction : 20 μm

12.Specimen orientation : X‐Y axis 8 deg and Z axis 360 deg

13. Instrument should be supplied with disposable blade holder for high and low profile blades, disposable blades (high profile and low profile), Specimen chucks, Brushes, Oil etc. 14. A 2 K.V.A online UPS also to be supplied with the instrument for at least 30 min standard backup.


SEMI-MOTORIZED ROTARY MICROTOME 1. Precision specimen orientation system with

clear zero reference point. 2. Force balancing system should be available for

effortless and uniform hand wheel rotation. 3. Section thickness setting from 0.5 to 100 μm,

with a provision of step-by-step increment.

02 pcs


4. Specimen feed of appx. 28 mm or above and vertical stroke length of 70 mm.

5. Trimming section thickness setting range: 5 – 500 μm with a provision of step-by-step increment

6. Precise specimen orientation of 8° in horizontal and vertical direction.

7. Coarse feed : motorized with variable speeds. 8. Knife holder base with lateral displacement




10.Slot cover to protect the interior of the instrument from sectioning debris. specimen size: 50 X 55 mm

11. Section waste tray must be provided. 12. Section thickness indication-visual display.

13. System should be equipped with both High profile & 14.Low profile disposable blade holder. 15.5 packet of each blade (High profile & Low profile) to be supplied with the instrument.

16.2 K.V.A UPS also to be supplied with the instrument for standard 30 min back‐up.


17.It should be CE/ISO certified .



1. The system must be walk away fully

Automated Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.






7. The system should have a mechanism which

will be able to control evaporation and protect tissue integrity on each slides.

8. The reagents and the antibody should get mixed through air whirlpool and no mechanical

01 pc


part should be involved for mixing the reagents and antibodies.








4 Real-Time PCR

Real-Time PCR:

1. The Real time PCR System must have International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and /or IVD certified.

2. The Real time PCR System should have an open platform system, and

musthave provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases

01 pc


3. Ready to use DNA and RNA master mixes should be available 4. The Real time PCR System must at least have the following In vitro

Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :




single run. 7. System should be able to run both standard mode PCR as also FAST mode

runs.

8. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine. Systems should be supplied with latest Pentium computer with color monitor and printer. It should have an interface to laboratory host computer. System software should be based on Windows XP and validated for IVD application.







14. Any additional step of centrifugation of tubes while performing the assay

should NOT be there.

15. Should come with standard chemistries for gene expression, quantification, mutation scanning, allelic discrimination, genotyping and methylation studies. System should be able to add a melt curve during a run if required. Instrument should be able to distinguish between 5,000-10,000 DNA genome equivalents (a two-fold difference in copy number) with confidence level up to 99.7%.






21. System should use close tube process to avoid any cross contamination. 22.Software: Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine, with additional features of creation of customer genotyping, DNA quantification, gene expression, and pathogen detection assays, resulting in creating template files that can easily be saved and used to run assays that require set protocols.






Inner - 10.1 x 7.3 cm

Outer - 10.1 x 8.2 cm







9.Should come with the facility to run 4 gels together with companion running module.

10.Buffer volume : 700 ml for 2 gels and 1000 ml for 4 gels.

11.Same System Should be compatible with electroelution and western blotting in the same tank

12.Should come with consumables for at least 100 reactions.

01 pc


13.POWER SUPPLY:-




Output Type: Constant voltage, Current or Power with

automatic crossover











• Spring mounted platinum coated titanium

anode and stainless steel cathode plate electrode to provide consistency and reproducibility in results, durability and extended life-span of the equipment.

• Maximum Gel Size should be 24 cm x 16

cm

• The system should be capable of transferring multiple gels simultaneously.

• Current requirement should be upto

3000mA.

• Special agarose gel support frame for performing southern blotting in the same system as an add-on facility would be preferred.

• Should come with consumables for atleast 100 runs

Power pack should have maximum output: 250V, 3.0A, 300W with the programmable facility for each parameters are as follows.


1 pc


• Current Output range (programmable):

0.01 to 3.0 A, fully adjustable in 0.01 A increments

• Power Output range (programmable): 1-

300 W, fully adjustable in 1 W increments

Output Type: Constant voltage, Current or Power

with automatic crossover





Add-on safety features like “No-load” detection,

rapid resistance change detection, ground leak detection; overload / short-

circuit detection; overvoltage protection; over-temperature protection are must.

The system should comply with EN61010 or

equivalent safety compliance.



SL. NO. NAME OF





Unit Cost (to be filled

in by tenderers)

Total Amount

(in figure)


Final amount after reducing buy

back rate

7 Fast

blotting

system


1. Fast blotting system for blotting four

gels simultaneously

2. Should have USB ports for filmware transfer

3. System should have a cooling fan




7. should have user notification with

following features


no load detection


end of run


01 pc

8 ELECTROPORATOR

ELECTROPORATOR

1. Electroporator system with the capability to electroporate eukaryotic

01 pc


cells, prokaryotic cells (bacteria), yeasts and other microorganisms.




5. It should also have required

software, pre-set optimized programmes and other accessories

9 MILLI Q

WATER PURIFICATION SYSTEM

MILLI Q WATER PURIFICATION SYSTEM The complete water purification system should comprise of two stages as below: Stage I Stage 1 of the system must comprise of the following:- The tap water supply generally has a particulate reading of 1200 ppb. A suitable pre-filtration system for bringing the concentration from 1200 ppb to 100 ppb before use with the R.O. System should be provided. RO water system with a dispensing rate of 1 Liter per minute or better and large cartridges of over 20 inches each for a long life. The removal efficiency of the RO water

01 pc


system should be as follows:- Suspended solids- 100%, Bacteria - 99.5%, Viruses -99.5%, Pyrogens - 99.5%, Organic, molecular weight >250 daltons - 97-99.5%, Monovalent inorganics - 94-96%, Divalent Inorganics - 96-98%, Trivalent Inorganics- 98-99%. The water quality should be suitable enough for general microbiology, general immunology and other activities such as glassware washing, deionization systems, glassware rinsing, buffer solution preparation, standard solution preparation etc. 2 extra prefilter, carbon filters ( total 3 each) to be included. Storage tank of around 15 -20 Liter at outlet of RO. System should include automatic flush valve, which extends RO membrane life: It should automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity. STAGE II For Ultra pure water Water quality must be good enough for Inorganic analysis: Ion chromatography, Inductively coupled plasma/mass spectroscopy, Atomic absorption, flame emission spectroscopy, trace metal analysis, Organic analysis such as Liquid chromatography, HPLC, Gas chromatography, Electrophoresis, Total organic carbon, Tissue culture, Clinical, General Microbiology, General Immunology,


Recombinant DNA etc. Purification technique used / filters included to be as follows :- Carbon filtration, De-ionization - 2 no’s of polishing grade mixed bed, Organic adsorption cartridge, Ultrafiltration 0.1 micron, Ultraviolet reactor ( with dual wave length of 185 & 254 nm), hollow fiber filter (optional). Smart independent dispensing system (Dispensing Gun) for low volumes of ultra pure water. In line pressure regulator. Dispensing flow: 1.5 - 2 L /minute of Type I or 1 L/ m with hollow fiber filter Extra membranes to be included within the offer: Pre-filters and Carbon Filters for RO system :- 18 No.’s each R.O. : 2 No.’s Polishing Station / Ultrapure Station : 2 Sets each complete. All items necessary to operate equipments must be quoted.


SL. NO. NAME OF






in by tenderers)

Total Amount

(in figure)



10 LIQUID NITROGEN VAPOUR STORAGE SYSTEM

LIQUID NITROGEN VAPOUR

STORAGE SYSTEM




4. Minimal interior temperature gradient

from bottom of Chamber to below the lid

5. LN2 level indicator and safety relief

valve should be present

Minimum 8000 of 2ml cryovial storage capacity in racks and boxes (all racks and cryoboxes should also be provided with 1 set spare rack and its set of boxes)

6. LN2 system should be safely

mounted on castors for easy and safe mobility when when loaded

7. Automated real time display monitor

below the lid

8. Automatic filling and control of LN2

01 pc


level

9. Alarms for deviations from set values of level and temperatures


11. Program lock to prevent

unauthorized intervention 12.Should have temperature log software for monitoring the parameters continuously and its history 13.Liquid Nitrogen Cylinders (2 in number) to connect to the storage vessel in order to automatically re-fill LN2 in the storage vessel as and when required. Capacity of Cylinders to be minimum 200 litres each, 22 PSI liquid delivery, equipped with LN2 level and pressure gauges and safety relief valve and mounted and restrained on castors for easy mobility.

14.Should be connected through Y connection: 1, LN2 transfer hoses 03.

15.Should have inventory system for 2 ml cryovials

16.Racks should have locking system to prevent fall out of sample storage boxes

17.Should provide 2 sets of LN2 safe cryogloves IQ/OQ/PQ validation documents should be provided


11 BIOSAFETY CABINET( Class II type B2)







6. Single piece stainless steel working

tray without welded joints to collect contamination or rust.

7. Robust dual wall cabinet construction with negative pressure plenums around the work zone.

8. High performance, long life fan

systems (HEPA/ULPA) with efficiency of air filter >99.9%.

9. Average airflow: Inflow – 100fpm or higher, Downflow – 60fpm or higher

10. Low noise level (<60dBA) and

vibration free.


12. Digital display for Air flow, UV, etc

with timer function for UV light. 13. Front window/sash should be made

01 pc


of non-reflecting, laminated safety glass.

14. Should be provided with electrical

outlet, water/media and gas inlet. 15. Should have supporting stand with

wheels, foot-rest and adjustable lab chair

12 CO2

INCUBATOR

CO2 INCUBATOR






6.Temp. Uniformity : ± 0.3ºC or lesser 7.Temp. Control : ± 0.1ºC or better using microprocessor based accuracy technology with digital display 8.Humidity : 95% ± 5% RH 9.CO2 Range : 0-20% with accuracy of ±0.2% or better

01 pc


10.CO2 Sensor : Infra-red based sensor 11.No. of Shelves : 4 or more

12.Other Feature : The system should have International QC certification and be supplied with CO2 cylinder

13 SONICATOR

SONICATOR

1. Model should be probe based, compact, benchtop size, programmable and suitable for cell disruption and homogenization.


3. Piezoelectic based converter with

required converter cable.


5. Programmable timer with adjustable

pulse sonication.


7. Supplied with standard probe (with replaceable tip) along with additional probes for sample volume 0.2ml to 250ml.

8.Digital display for monitoring parameters like wattage, amplitude and energy. 9.Jack stand, mounting system and sound proof box included.

01 pc


10.Inbuilt overload protection. 11.Lead free and ROHS compliant.


SHAKER INCUBATOR (Refrigerated) 1. Model : Refrigerated table top shaker

with provision of stationary tray for incubation of petridish/ culture plates and clamp sets for flask of different sizes (100ml to 2 litre)

2. Body : Exterior : Made of steel

1. Interior : Made of stainless steel

3. Temperature range : 10ºC - 75ºC or

better


5. Shaking Amplitude : 25mm/ 30-350 rpm with ± 2% deviation


7. Other features : Accurate PID control

for temperature reliability.


9. Fluorescent lighting and UV for

decontamination.

01 pc



15 MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATURE


Bench top model with small footprint with heating, cooling and mixing functions Facility for interchangeable block (with automatic block recognition feature) to accommodate plates and tubes ranging from 0.2ml to 50ml, Touch keypad with digital display of time, temperature and mixing speed, All three parameters to be freely programmable.


Temperature: Peltier based system,

temperature range from 150C below ambient to 1000C accuracy of ±0.50C at 20-450C, heating rate of at least 60C/minute and cooling rate of

01 pc


2.50C/minute.

Heated lid to prevent condensation on lid and sides of the tube.

To be supplied with block for 24x1.5ml

Micro Centrifuge tube. 16 AUTOMA

TED NUCLEIC

ACID WORKSTATION/N

A PURIFICATION

SYSTEM

AUTOMATED NUCLEIC ACID WORKSTATION/NA PURIFICATION

SYSTEM

• Should be a complete compact automated nucleic acid

isolation/purification workstation.

• Should be able to process 8

samples at a time.



• Should able to process broad variety of samples types including

whole blood, blood cells, plasma, fresh or FFPE tissue, body fluids, cultured cells, bacteria, clinical sample. (Should free from cross-contamination &can be used for PCR/RT PCR reaction.)

• Run time should be 20-25

minute or less according to batch size.

01 pc


• Should be based on Magnetic

bead technology for isolation of Nucleic acid. (DNA/RNA/TNA)

• There should not be use of any

manual steps & no other external device like vacuum pump or tubing/pumps are required.

• Should have preinstalled

protocols & no external program cards are allowed.

• Should have integrated HEPA

filter, UV decontamination for less


• Should be provided with starter

Nucleic acid (DNA/RNA) purification/isolation kit.

• All international certificates

including CE, CB & original software license should be provided.


10%50/60HZ+/-5% 17 VERTICA

L -80°C FREEZE


1. Temperature range -50°C to -86°C and

01 pc


R

adjustable with a setting accuracy of +1°C





6. Full racks and boxes should be quoted 7. Must maintain -86C° even at ambient

temperature of 32°C 8. Pull down time should be < 5 hrs 9. Microprocessor control for operation

with integrated audio visual temperature alarm function with digital monitoring display.


11.Should have automatic reset function to protect the microprocessor controller from damage by electrical spikes 12. Battery back for display and alarm during power cut. 13. Should provide electronic chart recorder system with integrated alarm and auto-dialer facility. By this, user should be able to access data anytime from anywhere using internet, it should to warn the user about the freezer malfunction through phone and email notification. Historic data recording i.e graph should be viewed by hours, days or months


with atleast three months data displayed at one time 14.Heavy duty hermetically sealed two stage compressor ( 4x¾HP) to maintain inner temperature below -86°C 15.Refrigerant should be CFC free 16.Should have space saving foot print (WxD): 80 x 86cm 17.Should have diagnostic software for fault condition. 18.Should provide C02 back up system with all necessary set ups i.e CO2 cylinder etc

19.Should have heated air vent to ease the door open during vacuum formation within the chamber 20.Power consumption should be < 8.5kWh/day 21.One fan circulation to lower the noise and power consumption 22.Insulation should be of 130mm thick with combination vacuum insulation panel and polyurethane foam. Vacuum insulation should have metal coated polymer film barrier seal to maintain vacuum strongly. 23.Should have lockable castors for free and easy mobility 24.To be operational on 220 to 240 Volts at 50 Hz. Single phase 25.Should have CE and UL certification 26.Should be supplied with compatible voltage stabilizer

18 Binocular LED Microscope



2. Microscope should have right hand

10 pcs


stage Stand with 4 positions Nosepiece, Universal Power Supply, Mechanical stage with non-extending rack and slide holder, Long life LED Illumination with Auto off facility, built in handle and cord wrap. Dust cover, Manual.



5. FOV should be 20mm 6. IPD should range from 52mm –

75mm 7. Abbe Condenser 0.9A dry with

relevant sliders. 8. Should have integrated vertical

handle for easy carrying & easy lifting with integrated cord wrap to eliminate damage to microscope components.







19 PLATELE

T

FUNCTIO

N

ANALYSE

R




3. Detect vWD 4. Detect platelet P2Y12 receptor

blockades in patient undergoing therapy with P2Y12 receptor antagonist

5. Start up reagent and cartridge for 100 tests

6.Test system Principle: High-shear force dynamic flow system • Measuring channel: Single measuring channel • Incubation category: Two incubation wells • Incubation temperature: 37.9 °C ± 1.0 °C • Incubation warm-up time: < 15 minutes (room to operating temperature) • Trigger solution: Illuminated trigger solution viewing area 7. Sample Handling • Type of sample: Citrated whole blood • Sample mechanism: Manual

01 pc


pipette dispensing (800 μL) • Barcode identification: external barcode reader for sample identification 8. Reagent Handling • Type: Single disposable self-contained test cartridges • Reagent recognition: Positive optical coding reagent cartridge identification • Additional reagent: Trigger solution 9. Throughput • Single test: P2Y, Col/EPI, or Col/ADP: 6 tests/hour • Duplicate test: Col/EPI or Col/ADP: 10 tests/hour 10.Software • Interface: Color LCD touchscreen • Host connection: Unidirectional, external RS-232 DB-9 port or ethernet network • Stored patient results, control results, and maintenance events: Last 1,000 results • USB port: Software updates, printer, barcode scanner,and result export • Quality control: Built in • Onboard help • Instrumentation status: Clear status messages (red, yellow, and green) 11. Power Supply • Operating voltage: 100 – 240 VAC • Main frequency: 50 – 60 Hz • Current (maximum): 1.38 A @ 90 VAC 12.Environmental Conditions • Operating temperature: 18 °C – 29 °C


• Non-operating storage: -29 °C – 50 °C • Relative humidity: 20 – 90 % • Operating humidity: 20 – 90 % RH (non-condensing) • Non-operating storage humidity: 0 – 95 % RH (non-condensing) • Degree of protection: according to IEC 60529 • Heat emission: 94 kcal/h (375 BTU/h) 13. Online UPS with 30 minutes backup

20 BLOCK

CABINET

BLOCK CABINET

1. Made of CRC sheet duly powder

coated.

2. Should have index card holder

and handle for each drawer.

3. Should be provided with lock

and key

4. Capacity 20000 blocks

02 pc

21 SLIDE

CABINET

SLIDE CABINET

1. For placing slides in horizontal

manner

2. For safe and easy handling of 75

× 25 mm slides.

3. Made of mild steel sheet.

4. Well designed for performance

and durability.

5. Powder coated paint outer finish

with smoothly working doors

fitted with handle, lock and key.

02 pc


6. The anodized aluminium slide

strays for holding 75 × 25 mm

slides, have been arranged

separately so as not to disturb

other compartments while taking

out or putting in the slides.

7. The size of the tray approx 350

× 210 × 35 mm and nicely fitted

with uniformly slotted aluminium

carrier each holding slides in


8. Fitted with index card holder.

9. Capacity 20000 slides.

22 UV Sterilization cabinet




contamination 4. Protects the user from Biohazard

samples 5. Four powerful, timer controlled

UV tubes, combined with

optimal reflectors, provide efficient irradiation of the

complete work surface 6. Doors equipped with safety

cutouts 7. To be provided with safety

trays and easy to clean tray

liners 8. Safety interlocks on the cabinet

doors prevents the user from

any exposure to the UV light

01 pc


9. To be provided with required

accessories such as height

adjustable stool, etc

23 Micro Centrifuge for 0.2ml PCR

tubes



04 pcs

24 Micro Centrifuge for 1.5

ml/0.5ml PCR Tubes


1. Quiet and Reliable

2. Small foot print 3. Built in power supply 4. Digital display of time and speed



03pcs

25 Vertic

al

Lamin

ar Air

Flow

Cabin

et

Vertical Laminar Air

Flow Cabinet 1. Inner work surface width a

minimum of 2 feet for easy handling of samples

2. Laminar Air Flow Cabinet should be tested for cross-

contamination and product protection using microbiological test methods specified in

02 pcs


EN12469.

3. Sentinel Microprocessor-Based Control & Alarm System

4. ISO Class 4 Air Cleanliness 5. Front Sliding sash

6. Cabinet Construction a. Main Body : 1.2 mm /

0.05”/ 18 gauge electro-galvanised steel with white oven-baked epoxy

powder-coated finish b. Work Zone : 1.2 mm

(0.05") 18 gauge Stainless Steel, grade 304, 4B finish. Single

piece stainless steel work surface with a curved

front edge for maximum operator comfort

a. Side Walls : Colourless

and Transparent UV absorbing tempered glass

to enhance visibility inside the work area.

7)Raised Front edge.

8)Temperature compensated Air velocity sensor.

9)HEPA Filter Typical efficiency - 99.99 % for particles size at 0.3 microns.

10)Additional disposable pre-filter with 80 % arrestance to trap large particles

in the inflow air prior to reaching the main filter, protecting against damage and prolonging filter life.

11)External surfaces should be powder


coated with Isocide Anti-microbial

coating to eliminate 99.9 % of surface bacteria within 24 hours of exposure.

12)Permanently lubricated, high performance, energy efficient,

centrifugal motor/fans. less electrical energy consumption. Completely

integrated assembly to optimize motor cooling. All rotating parts should be balanced for smooth, quiet and vibration-free operation.

13)Sound Emission : < 61 dBA as per IEST-RP-CC002.2

14)Electrical 220-240V, AC.

15)To be provided with additional accessories-

I. Support stand with adjustable height.

II. UV lamp for decontamination.

III. Ergonomic height adjustable Lab chair.


SL. NO. NAME OF






in by tenderers)

Total Amount

(in figure)



26 Class II

Biological Safety Cabinet Type A2

Class II Biological Safety Cabinet Type A2

1. Size atleast 1.2 X 0.6 X 0.6

meters 2. EN 12469 Certified

3. Recirculation 70% & Exhaust 30%

4. Average Air Flow Velocity:

(1)Inflow : 0.45 m/s (90 fpm) at initial setpoint,

audible/visual alarm should activate at 0.40 m/s (80 fpm)

(2) Downflow : 0.30 m/s (60 fpm) at initial setpoint

with uniformity of better than +/- 20%

5. Noise Level < 62 dBA

according to EN 12469 6. Cabinet Construction:

1. Main Body: 1.2 mm (0.06") 16 gauge electrogalvanized steel with

white oven-baked epoxy antimicrobial powder coated

finish Work Zone: 1.5 mm (0.06") 16 gauge stainless

steel, type 304, with 4B finish Interior work area formed from a single piece of

stainless steel with large

03pcs


radius corners to simplify

cleaning. 7. ULPA filters with efficiency

greater than 99.999 % for

superior operator and product protection

8. Standard Compliance : 1. Filter performance - IEST-RP-

CC034.1, IEST-RP-CC007.1, IEST-

RP 2. Electrical Safety - IEC 61010-1 /

EN 61010-1 / UL 3101-1 / hsirig, CSA C22.2 No. 1010.1-92

3. ISO Class 3 air cleanliness in work

zone.

9. Negative pressure plenum should surround

contaminated positive pressure plenum for quiet, uniform airflow

10.Microprocessor Control with temperature compensated

airflow sensor for supervising all cabinet functions.

11.Antimicrobial coating on all

painted surfaces to protect against surface contamination.

12. Advanced separatorless mini-pleated

ULPA filters tested to > 99.999% efficiency for 0.1 - 0.3 micron

particulates.

13.Digital read-out with alpha-numeric display should indicate all input, status and alarm functions.

14.The cabinet work zone should not


have welded joints to collect

contaminants or rust.


16.A recessed central area and stainless

steel drain pan channels for preventing liquids from entering the lower filtration and blower systems

17.Angled viewing window and narrow

profile front grille to improve reach into the work area

18.Front armrest raised above the work

zone to improve comfort and to ensure no airflow blockage

19.Frameless, shatterproof sash for

easier cleaning, and for larger, unobstructed viewing area

20.The Biological Safety Cabinet Should be individually tested, documented by

serial number and validated with the following test methods.

21.Inflow / downflow velocity PAO Aerosol challenge for filter integrity Light, noise and vibration Airflow pattern

visualization Electrical safety to IEC61010-1

22.Electrical 220-240V, AC, 23.To be provided with additional

accessories- a. UV Lamp b. Ergonomic height adjustable

chair.

27 Vortex

Mixer

Vortex Mixer 1. 1200 rpm

2. 220/230 V AC

03pcs


3. Size 12” × 12”

28 Water

Bath

Water Bath 1. Double walled made of stainless

steel.

2. Outer wall powder coated 3. Space between double walls is

filled with glass wool for insulation 4. Provided with drain plug for easy

emptying

5. Reliable immersion heating elements

6. Thermostat controlled temperature from ambient to 100 degree Celsius +/- 0.5

7. Digital Display of temperature with appropriate regulators, on

/off switch, alarm 8. Suitable to operate on 220 V AC

supply

9. To be provided with accessories 1. Stirrer with

S/S rods and blades

2. Test tube

racks of S/S

03 pcs

29 Single channel micropipette

Single channel micropipette 1. Single channel variable volume

0.1µl-2/2.5/5 µl 2. Systematic error should not be

more than 3% at minimum volume

and 1% at maximum volume 3. Minimum resolution of volume

0.001µl 4. Easy digital volume setting 5. Enhanced UV resistance

05 pcs


6. Precise reproducibility for long

hours 7. Tip ejection automatic 8. User technical manual to be

supplied in English 9. Certificate of calibration and

inspection should be provided 10. Spare parts and accessories to be

provided with pipettes.

11. Should provide compatible stands


SL. NO. NAME OF






in by tenderers)




Department of Pathology(For ESIC HOSPITAL, JOKA & Manicktala)



1. The system must be walk

away fully Automated Slide Preparation system to process slides for Immuno Histo Chemistry, In Situ Hybridization, Silver In Situ Hybridization ,Immuno Fluroscence and should be able to process IHC with IVD approved p16 antibody for the stage detection of cervical cancer.








7. The system should have a

mechanism which will be able to control evaporation and protect tissue integrity on each slides.




11. The system should be able to recognize Slide Specific


Barcode label which would provide automatic programming, patient and case identification.


13. Online UPS must be

provided with minimum one hour back.

14.The system should have compatible computer and software of latest technology available during installation. The software should be upgradable.

2 Fully

Automated Urine

Analyzer

Fully Automated Urine Analyzer

1. Random access system for

physical, chemical and

sediment analysis on urine

specimens.

2. Multiparameter Chemistry

analysis of at least 10


a. Specific gravity

b. pH

c. Albumin



d. Glucose

e. Ketone Bodies

f. Bilirubin

g. Urobilinogen

h. Blood/Hemoglobin

i. Micro albumin

j. Nitrite

3. Analysis of standard urinary

sediments consisting of

different cells, casts and

crystals.

4. Throughput-60/hour including

sediment analysis in random

access mode.

5. Microprocessor based

photometric analysis of

chemical parameters and flat

flow cell technology with high

speed and 800-1000 frame

imaging for sediment analysis.

6. Interconnected parallel pc with

appropriate soft ware for –



Image display of formed


elements

Storage of data of results

and others atleast

10,000 in number

7. Bar coded facility for reagent

and sample identification

8. Laser colored printing of results

and data

9. Power back up with UPS for at

least 2 hours

10. Accessories

a. Sample rack to hold 50

samples-05

b. Reagents for start up- 1000

analysis

c. International certification for

medical equipments

3 Bone decalcifier

automated,

electrolytic

decalfication

system




1. Automated system for processing of



Gynaecological and non- gynaecological cytology samples for liquid based cytology along with automated stainer.

2. Should have ability to make single slides which is uniform and reproducible.

3. Should have a controlled membrane transfer technology to make a thin smear with uniform distribution of cells.


5. Should have an automated slide stainer with an ability to run at least 30 slides in half an hour.

6. UPS with two hour power backup.

7. CE certificate Accessories:

1. Microscopic slides- 2 boxes of 100 slides

2. Filter- 2 box to process 200 samples

3. Solution -2 box to process 200 samples

4. Preservative solution -2 box


to process 200 samples 5. Staining kit for staining at

least 200 smears 6. All the standard accessories

to be provided with the equipment.

5 Patient and

data

managemen

t system


1. Fast processing system with

high end security having

several different modules for

patient and data management

of the laboratories.

2. Should have the ability to

generate unique identification

number of the patient starting

from lab registration, sample

collection, testing and report

delivery with generation of bar

code id, and stickers.

3. An integrated token system for

the patients while waiting for

sample collection.

4. Computer with bar code reader

in registration, sample

collection, different labs (

clinical pathology,

Cytopathology, hematology,

histopathology, different



sections of biochemistry and

microbiology)

5. Easy to operate

6. Ability to store data of at least

5000 patients per day.

7. Data to be accessible on

mobile, laptop, tablets etc and

the ability to deliver SMS to

target people(patients as well

as doctors).

8. Result modification before final

report delivery.

9. Can be integrated with other

automated lab equipments.

10. New features can be upgraded

time to time as per

requirements

11. Accessories for the system to

be supplied along with the

software.


Automated Cover Slipper

1. Fully automated unit

with a through put of

400 slides/hr. at least

2. Should be compatible

with different sizes and



thickness of cover slip

as written below.

i. Size – 40mm, 50mm,

55mm, 60mm.

ii. Thickness – 0.13 –

0.17mm.

3. Should be compatible

with different solvent

like xylene, d-limonene

and aliphatic

hydrocarban –based

substitute and

mounting medium like

DPX etc.

4. Should be able to

handle both histology

and cytology sample

simultaneously.

5. Should have an in-built

filter to remove any

vapors or fumes.

6. Easy to operate with

different program

setting and a touch

screen panel.

7. Should be able to

accept slides from


different automated

slide stains.

8. UPS for 1hours back

up.

9. International CE

certification for medical

equipment.

Accessories – 1. Cover slips of different

sizes & thickness – 500

each.

2. Dust cover.

3. Standard accessories

with the main

equipment.


materials


For ESIC HOSPITAL, JOKA

Cardio-Vascular

Mitral stenosis Atheroma aorta Lt. ventricular hypertrophy Fibrinous pericarditis Dilated Cardiomyopathy Infective endocarditis

2 each

Respiratory Lobar pneumonia 2 each


Bronchiectasis Emphysema Pulmonary Tuberculosis fibrocaseous & miliary Bronchogenic carcinoma Silicosis Bysinosis

Gastro-Intestinal

Peptic ulcer Typhoid ulcer of S.I.

2 each


2 each

Vascular Syphilitic Aortits 2 each


2 each


2 each


2 each

Female Breast Carcinoma breast 2 each


2 each

Lymph Node TB Lymph Node Hodgkins LN 2 each




2. Vacuum breaker-protected water supply

3. Ventilation system with Two options(outside source or inbuilt)

4. Large sink with mixing faucet

5. Ample lighting 6. Magnetic instrument

holder 7. Washable dissecting

board 8. Must have Service

centre in Kolkata


Grossing board to

accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness

Integrated rulers on the

standard and large boards to

01 pc (for ESI Hospital , Manicktala)


enable gross measurement of specimens.




Dust cover Dictating unit with microphone UPS 1.0 KVA Integrated imaging system Infrared control.

9 GROSSING STATION

Item: : Histopathological Grossing table / Grossing Station elevated floor model with Electrical and mechanical controls with UPS 1.0 KVA . Details: 1. Cutting board with black viewing surface, to accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness. 2. Connecting tubes for water

supply and drainage.



3. Sprinkler system for easy

cleaning of the working area.



6. Electronic scale upto 2000g at

least.

7. Integrated S.S. rulers in cm / mm scale on the standard and large boards. 8. Light tubes and adjustable spot

lights.

9. Filtration system to suck-off polluted air, with easily Replaceable filter, alum oxide. 10. Magnifying Glass with long

handle (flexible).

11. Separate metal table for

grossing with drawers.


13. Dictating Unit with microphone and controlling unit & foot switch Essential Accessories must be

supplied with the main

consignment

Trimming knives and scalpel blades to provide the sharp cuts necessary for exact


grossing techniques. Tissue tampers for allowing a

firm hold on specimens while making horizontal cuts.




Nomenclature: Laboratory Microwave Processor System for Enzyme Retrieval Table- top Model 20 to 30 Litre capacity. Description: Table-top model, capacity 20-30 Litre, convection mode, S.S. body, preferably ceramic enamel inner wall, programmable digital temperature controller and display within a range of 40°C to 108°C, built-in temperature probe, automatically controlled programmable timer setting and digital display, wattage level 800 - 1000 watt : MW leakage proof design, overheating prevented design, audible alarm with user adjustable time delays,



throughput of 80 – 100 slides per run, dewaxing, rehydration and antigen retrieval in approximately 30 minutes,IEC/CE/ISO Certified model. Essential Accessories :

5. Compatible Plastic Rack for holding slides: 5 (five) numbers

6. MW compatible specimen containers assorted sizes: 5 (five) numbers

7. U.P.S. 1 KVA: 1 (one)Number

8. Operator’s Guide

11 pH METER DIGITAL

Nomenclature : pH Meter digital pen type. ( Minor variation of quoted specification may be accepted within a short range as available in the market nearest to the requirement of the consignor) Principle:

05 pcs (04 pcs for ESI Hospital , Joka & 01 pcs for ESI Hospital Manicktala)


Microprocessor controlled pen type equipment.



Resolution: 0.01 pH; 1 mV. Accuracy: ±0.01 pH ± 1 digit; ± mV ± 1 digit Operating temperature: 10˚C to 50˚C. Operating Panel & Display: Panel for different functions with digital LED Display.

12 AUTOMA

TIC PRECISIO

N MICROBA

LANCE

Nomenclature: Electronic precision weighing balance 150g (approx) with display and UPS. (Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Description : Electronic precision microbalance with chemical and moisture proof stainless steel top-

02 pcs (01 pc for ESI Hospital , Joka & 01 pc for ESI Hospital Manicktala)


fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Power cord Indian type. Capacity: Maximum capacity : Approx. 150 g Readability : 0.01 g Repeatability : 0.01 g Linearity : ± 0.02 g ( at ambient temperature) Essential Accessories must be supplied with the main consignment & committed in the bid 1. Calibration weight. 2. Protective cover.

13 Hot plates with digital temperature controller, temperature range upto 300°C, heat-

2 pcs (For

ESI-PGIMSR,


electric proof powder coated cast iron top, spiral heaters, thermostatic heat control

JOKA)


______________________

1 pc (For

ESI-PGIMSR,

JOKA)



1 pc (For

ESI-PGIMSR,

JOKA)



2 pc (For

ESI-PGIMSR,

JOKA)

17 Staining Racks

S.S. horizontal with handle cradle type for 10 slides/ 20 slides

20 pc (For

ESI-PGIMSR,


JOKA)



2 pc, (For

ESI-PGIMSR,

JOKA)

19 Laboratory

Counter Laboratory Counter Clay-Adams 9 keys spring loaded, including eight individual counting keys and one totalizer heavy duty metallic body, good visibility of rotating digits, digit range 0 to 100 for each, audible alarm at 100 count in total,. Options for counting of cell, simple computation and percentage counting. Individual key counting limit of 999 cells. Bilateral sturdy resetting knobs.

6 pcs (For

ESI-PGIMSR,

JOKA)



6 pc(For ESI-

PGIMSR,

JOKA)



2 pc (For

ESI-PGIMSR,

JOKA)

22 Drill for boring glass ______________

2 pcs (For

ESI-PGIMSR,

JOKA)

23 Blow piece with bellow for bending

_____________ 2 pcs(For

ESI-PGIMSR,


glass JOKA)

24 Sternal

Puncture

Needle

Sternal Puncture Needle (Klima and Salah type)Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size:15G, 1 7/8inches Adult size

6 each (For

ESI-PGIMSR,

JOKA)

25 Sternal

Puncture

Needle

Sternal Puncture Needle(Klima and Salah type) Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size: 18G, 1 ½ inches Child size

6 each (For

ESI-PGIMSR,

JOKA)

26 Liver Biopsy Needle Trucut needle s.s.

_____________

6 pcs (For

ESI-PGIMSR,

JOKA)

27 Box weight analytical ______________

1pc (For ESI-

PGIMSR,

JOKA)


_____________

6 pc (For

ESI-PGIMSR,

JOKA)


_____________ 1 pc (For

ESI-PGIMSR,

JOKA)















Forceps Iris

Forceps Sinus

Forceps Specimen

2 sets (For

ESI-PGIMSR,

JOKA)






Mallet S.S.

Needle Teasing S.S.


Probe Straight S.S.








Scissors Surgical Straight


blunt/blunt


Speculum Nasal

Sponge Holder




31 Dark Room Lamp

__________________ 1pc (For ESI-

PGIMSR,

JOKA)

32 Deep Pan S.S.

__________________ 5 pc (For

ESI-PGIMSR,

JOKA)


__________________ 2 pcs (For

ESI-PGIMSR,

JOKA)

34 Sampling __________________ 5 pcs (For


scoop S.S. ESI-PGIMSR,

JOKA)


__________________ 5 pcs (For

ESI-PGIMSR,

JOKA)


__________________ 2 pcs(For

ESI-PGIMSR,

JOKA)


__________________ 2 pcs (For

ESI-PGIMSR,

JOKA)


__________________ 1 pc (For

ESI-PGIMSR,

JOKA)


1 pc (For

ESI-PGIMSR,

JOKA)


5 pcs (For

ESI-PGIMSR,

JOKA)


1 pc (For

ESI-PGIMSR,

JOKA)

42 Leather Strop superfine quality

1 pc (For

ESI-PGIMSR,


double sided JOKA)


1pc (For ESI-

PGIMSR,

JOKA)

44 Post-mortem set




Calipers

Curettes

Cuscoe’s speculum

Dilators

Enterotomes and

2 sets (For

ESI-PGIMSR,

JOKA)


viscerotomes








Forceps Iris

Forceps Sinus

Forceps Specimen

Irrigation device


Knife Brain

Knife Cartilage

Knife Professional

Knife Resection


Nasal speculum

Needle holders

Retractors


Rib shears



Scissors Dissecting



Scissors Iris


Scissors Mayo Dissecting


Straight 5.5 inches


Scissors Metzenbaum




Sternal Saw

Stryker Skull Saw

Surgical


staplerwith reloadable staple cartridges

Tenaculum

Towel forceps

Tray 12 x 12 inches

Tray 12 x 18 inches

Trocars

45 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned

__________________ 2 pcs(For

ESI-PGIMSR,

JOKA)


cannula tip.Adult type, 11G, Stainless steel instrument tray with lid 8 inches x 8 inches

46 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Pediatric type, 13G, Stainless steel instrument tray with lid 8 inches x 8 inches

__________________ 2 pcs (For

ESI-PGIMSR,

JOKA)



__________________ 5 pcs(For ESI-PGIMSR, JOKA)


__________________ 1 pc (For ESI-PGIMSR, JOKA)

49 Class II

Biosafety

Laminar

Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13

1 pc (for

ESI

PGIMSR

Manicktal

a)


Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system

50 Homogenizer

with two

probes


Small dispersing instrument for volumes from 0.1-100 ml Quick-connect coupling for probes Stainless steel probes Option of using with plastic disposable dispersing elements • High performance drive Probe for volume Range (H20): 0.1 to 10 mL, 1-100 ml Speed Range: 8000 to 30,000rpm Maximum Viscosity (cps): 20000 Preferably built-speed control Use Options: Handheld or stand-mounted Motor: 125w Noise Level: 65dB or less Overload Protection: Yes Should be supplied with all the accessories like Stand, boss clamp, clamp etc

1 pc (for

ESI

PGIMSR

Manicktal

a)


CLINICAL LABORATORY (For ESI-PGIMSR, JOKA






12 sets(For

ESI-PGIMSR,

JOKA)





3. Glass Landau’s tubes, class A glass with bulb and precision etched and printed marks at 0 to 50 mm : 5

5 sets(For

ESI-PGIMSR,

JOKA)


(Five) tubes 4. Filling pipette with long stem

and rubber teat : 5(Five) No.s 53 Urinometer

precision glass with mercury bulb and graduated stem with temperature mark

___________________ 20(For ESI-

PGIMSR,

JOKA)


_________________ 20(For ESI-

PGIMSR,

JOKA)


_________________ 2(For ESI-

PGIMSR,

JOKA)

56 Crucible Gooch with

_________________ 2(For ESI-

PGIMSR,


adaptor JOKA)


Electronic precision balance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing;

_________________ 2(For ESI-

PGIMSR,

JOKA)


provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Maximum capacity: Approx. 12000g Readability : 0.1g Repeatability : 0.1g Linearity : ± 0.3g (at ambient temperature) Essential Accessories 1. UPS of capacity 0.5 KVA. 2. Power cord Indian type.


3. Extension cable 5m. 4. Calibration weight. 5. Protective cover.






2(For ESI-

PGIMSR,

JOKA)



60(For ESI-

PGIMSR,

JOKA)


Spectrophotometer



c. 2 point end linear & non linear.






1(For ESI-

PGIMSR,

JOKA)










Calibration: Automatic against standard / calibration.


b.


Levey - Jennings diagram.





Display:

a. Graphic LCD.





Key board:

a. Chemical and moisture prevented single touch alphanumeric membrane


key panel.

Printer:









Peripheral interfacing: a. Parallel ports for external


printer , keyboard and PC. Software PC Compatible.





____________________ 12(For ESI-

PGIMSR,

JOKA)

62 VOLUME DISPENSER



01 pc (For ESI-PGIMSR, JOKA)


SL. NO. NAME OF






in by tenderers)






ULTRA LOW TEMPERATURE LAB DEEP FREEZER Nomenclature : Laboratory deep freezer floor model electrically operated, capacity of approx 550 L- 600 L ( Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Principle: Electrically operated vertical floor model with ultra cooling device, stainless steel interior, 4-5 replaceable storage compartment with stainless steel racks, temperature selector and Temperature Controller, eye- level display and temperature recorder, gasket sealing system to avoid ice formation, calibration mode should be built-in with the system and lock system in door. Temp. range: Selectable range from -400 C to - 80˚C.

Operating Panel & Display: Button/ switch panel for different functions and programmes,viz, start, stop, temperature control, temperature and time setting with LED Display. Battery backup for alarm & display. Display of set and actual running

01 pc


values. Alarm: Acoustic Signal for over or under-temperature, improper locking of door(optional), or error. Essential Accessories must be supplied with the main consignment & committed in the bid 1. Thermometer. 2. UPS 2.0 KVA. 3. Power cord Indian type. 4. Storage boxes.

2 Automated

Immunohematolo

gy detection

system

Specification Automated Immunohematology

detection system by Gel Card Technology.

1. Semi-automated immunohematology analyzer incorporated with centrifugation, reading and interpretation abilities for the tests performs by the column agglutination technology for transfusion related cross matching on anti human globulin and enzyme phase (to detect both IgG & IgM antibodies), blood grouping, partial Rh-D typing, antibody screening &identification in a single step.


(i) ABO Blood grouping with partial D

01 pc


screening.

(ii) Weak anti D test with ICT method.

(iii) Antibody screening and identification.

(iv) Single antigen test cards and antisera for Rh-C/c, E/e, Cw, Kell, Fya, Fyb, Jka, Jkb, Lewisa Lewisb, Lutherana, Lutheranb, MNS, etc.

(v) Special gel cards for antihuman globulin test positive IgG, IgM, IgA, C3d, C3c etc.

(vi) Provision for acid elution method.

(vii) Special blood grouping cards for donor and recipient for DVI variant.

(viii) Syphilis antibody detection.

Detail procedure for all compatible methodologies mention as above must be provided. 3. Automated card reading and report

generation with bar code security.












14.

(i) Provision for 2 and 3 red cell panel for antibody screening, 11 cell panel for antibody identification and pooled ‘O’ cell with known phenotype for donor screening as per NACO Guidelines.

(ii) Provision for NaCl/Enzyme and cold agglutinins cards, modified bromelin solution, papain, cell stab, cell thaw and cell freeze reagent.



SL. NO. NAME OF






in by tenderers)




DEPARTMENT. OF SURGERY ESI-PGIMSR, JOKA 1 OPERATING

HAND

INSTRUME

NTS

OPERATING HAND INSTRUMENTS Set for LAPROSCOPIC SURGERY

01 set


3




3




1






1





1





1




1





2






1





1





1





1





1






1





1



1



1




1




1


1


1




22 Monopolar Cable

1


1


1


1



INSTRUMENT





in by tenderers)

Total Amount (in

figure)


Final amount

after reducing buy

back rate

DEPT OF DERMATOLOGY ESI PGIMSR, JOKA KOLKATA

1 Radiofrequency machine

Radiofrequency machine Number of items: 2 Power required: 230v/50 hz Dimensions 260x300x150 Weight 7kg Electrodes insulated Frequency 0.20-2.93 Mhz Cut: 70%cut, 30% coagulation Coagulation : 60%coagulation, 40% cut Fulguration: available intensity control: Linear

02 pcs


Centrifuge machine Number of items- 2 Capacity in ml: 24x5 Type of head: Angle

02 pcs


No. of tubes: 24 Maximum speed: 3500 rpm Maximum RCF: 1250 W×D×M (MM) : 210×210×250 Supply: 221-240v, 50Hz, single phase


Binocular microscope Optical system: UIS2 (UNIVERSAL INFINITY CORRECTED) CE certified Antifungal treated optical lens Illumination: built in transmitted Koeheler illuminator, 6v/30W halogen bulb 100-120V/220-240V ̴ 0.85/0.45A , 50/60 Hz Focussing: Stage height movement by roller guide (rock & pinion), stroke/rotation=36.8mm Full stroke range: 25mm Revolving nose piece: Fixed, quadruple nose piece with inward tilt Binocular observation: field no. 20, tube inclination:30 degree, interpupillary distance adjustment range: 48mm-75mm Stage: size-188mm x 134mm, movement range: 76mm (X direction) x 50mm (Ydirection) Specimen holder: double size holder Rubber grip: equipped as standard Condenser: type- Abbe condenser, NA: 1.25 with oil immersion, aperture in diaphragm: built in Dimensions & weight: 233mm (W) X 411mm (H) X 367.5 mm (D), 8KG

02 pcs


DEPT OF ENT ESI PGIMSR, JOKA KOLKATA

1 Surgical Operating Microscope


1. Integrated HD monitor to display

surgical steps to students.

2. Integrated HD video recording

system with HD camera system.

3. Integrated HD still photography

enabling system with camera

attachment facility.

4. Data storage, transmission and

documentation facility with

appropriate software.

5. Stereo co-observation tube for

assistant surgeons and students.

6. Lens for ear and laryngeal surgery

(400, 200)

7. Lens covers and microscope covers

for sterility purposes


01 set

2 Rigid Oesophagoscope

Specification for Rigid Oesophagoscope set Adult: 1. 0 degree telescope diameter 5.5mm, length 53 cm, autoclavable with

01 set


set Adult incorporated fibre optic light transmission 2. Telescope guide for use with 50cm esophagoscope 3. fibre optic light carrier for use with 50cm esophagoscope 4.Rigid oval esophagoscope, outer diameter 12 X 16 mm, length 50 cm 5. Rigid oval esophagoscope, outer diameter 10X14 mm, length, 50 cm 6. Prismatic light deflector, autoclavable with fibre optic light cable connection 7. fibre optic light carrier for use with 30cm esophagoscope 8. Rigid oval esophagoscope, outer diameter 12.2X 16.2 mm, length 30 cm 9. Rigid oval esophagoscope, outer diameter 10.2 X14.2 mm, length 30 cm 10. Rigid oval esophagoscope, outer diameter 8.6X 12.1 mm, length 30 cm 11. Fibre optic light carrier for use with 20 cm hypopharyngoscope 12. Rigid Oval Hypopharyngoscope, outer diameter 10X14 mm. length 20 cm 13. handle for Esophagoscopes 14. Adjustable magnifier autoclavable(swivel action) 15. Cotton carrier(55cm) 16. Rigid suction tube with rubber tip, straight, working length 55cm 17.spring handle sponge holder, working length 55cm 18. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 2.5mm,working length 55cm 19. biopsy forceps and foreign bodies, working length 55cm 20. cupped forceps for biopsies, working length 55cm


21. Peanut removal forceps ,working length 55cm 22. Cotton applicator, working length 30cm 23. Straight suction tube with rubber tip, working length 35cm 24. Spring handle sponge holder, working length 35cm 25. Alligator forceps, sheath diameter 2mm,working length 35cm 26. Peanut forceps, working length 35cm 27. Cupped forceps for biopsy ,working length 35cm 28. Universal forceps for biopsy and foreign bodies ,working length 35cm


Specification for rigid oesophagoscopy set , Paediatric 1, Oesophagoscope tube, size 6,length 30 cm 2. Oesophagoscope tube, size 5, length 30 cm 3. Oesophagoscope tube, size 4, length 30 cm 4. Oesophagoscope tube, size 3.5, length 18.5 cm 5. Oesophagoscope tube, size 3, length 18.5 cm 6. Prismatic light deflector ,autoclavable with connection for fibreoptic light cable 7. Rubber telescope guide 8. Adjustable magnifier (swivel action) autoclavable 9. 0 degree telescope, diameter 2.9 mm, autoclavable, fibreoptic light transmission incorporated 10. Optical forceps,2x2 tip, with spring action handle for use with telescope (for

01 set


coins and flat foreign body) to be used with 30 cm oesphagoscope 11. Optical forceps with spring action handle for use with telescope (for peanuts and soft foreign body) to be used with 30 cm oesphagoscope 12. Optical forceps with spring action handle for hard foreign bodies to be used with 30 cm oesphagoscope 13. Peanut removal forceps with double action jaws, sheath diameter 1.5mm,working length 35cm 14. Biopsy and foreign body forceps, double action jaws, sheath diameter 1,5mm, working length 35cm 15. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 1.5mm, working length 35cm 16. Cupped forceps for biopsy, double action jaws, sheath diameter 1.5mm, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Straight cotton applicator working length 35cm - 3 such


Rigid bronchoscopy set, adult 1. 30 degree telescope, diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 2. 90 degree telescope diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 3. Rigid bronchoscope, size 8.5, length 43cm 4. Rigid bronchoscope, size 7.5, length 43cm 5. Rigid bronchoscope, size 6.5, length

01 set


43cm 6. Deflecting device for bronchoscopes and telescopes 7. FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 8. Adapters to respirator - 2 such 9. Rubber telescope guides - 2 such 10. Glass window plug - 2 such 11. Instrument guides for suction catheter - 2 such 12. Injection canula for positive pressure assisted ventilation, LUER lock, outer diameter 3.5 mm for use with bronchoscopes 13. Optical forceps, alligator, large jaws for hard foreign bodies 14. Optical biopsy forceps, circular cup, 4.3mm 15. Flexible forceps for biopsy 16. Alligator forceps for hard foreign bodies, double action jaws, diameter 2.5mm, working length 50cm 17. Peanut removal forceps, double action jaws, sheath diameter 2.5mm, working length 50 cm 18. Cupped forceps for biopsy, double action jaws ,sheath diameter 2.5mm, working length 50 cm 19. Cotton carrier, working length 50cm - 6 such 20. Sponge holder with spring handle, working length 50cm 21. Cytology brush with ring handle, working length 55cm 22. Coagulation suction tube, insulated, working length 50 cm accompanied by unipolar high frequency cord with 5mm


plug, length 300cm 23. Straight suction tube with rubber tip, working length 50cm - 2 such 24. Curved suction tube with rubber tip, working length 50 cm 25. Suction tubes 4mm diameter, length 50 cm - 2 such 26. Aspirator, can be connected to suction tubes or suction catheter 27. Spare glass for aspirator 28. HUZLY Aspirator and bronchial irrigator 29. Laryngeal syringe, 5ccm, LUER lock, with canula 30. Bronchial atomizer, with graduated container and rubber bulb, length 50cm 31. Laryngeal atomizer with bulb, length 50 cm 32. Suction catheter, 7 Fr with connector 33. Suction catheter, 5 Fr with connector


Rigid bronchoscopy set, Paediatric 1. Bronchoscope size 6, length 30cm 2. Bronchoscope size 4.5, length 30cm 3. Bronchoscope size 3.7, length 30cm 4. Bronchoscope size 3.5, length 26cm 5. Bronchoscope size 3, length 26cm 6. . FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 7. Adapters to respirator - 2 such 8. Rubber telescope guides - 2 such 9. Glass window plug - 2 such 10. Instrument guides for suction catheter, short, for children and infants - 2 such 11. Injection canula , only, LUER lock, outer diameter 3.5 mm for use with bronchoscopes - 2 such 12. Prismatic light deflector, autoclavable

01 set


with connection for fibreoptic light cable 13. Cotton applicator, working length 35cm - 3 such 14. Sponge holder with spring handle, working length 35cm 15. Foreign body basket with ring handle, working length 35cm 16. Cytology brush with ring handle, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Curved suction tube with rubber tip, working length 35cm 19. Suction tube, 3mm, working length 35cm, curved 20. Bronchial atomizer, graduated container and rubber bulb, working length 40 cm 21. Graduated containers - 2 such 22. Aspirator with spare glass and cut off hole, can be connected to suction tube or catheter

6 AUDIOMETER

AUDIOMETER REQUIREMENT The audiometer should have the following specifications: *It should be a Clinical PC-based audiometer. *The manufacturer should provide instructions and provision for calibrating the instrument. *The following tests should be able to be performed by the audiometer:

Pure tone audiometry, Speech

audiometry ( Including Speech

reception threshold and speech

discrimination score), SISI, ABLB,

01 set


AUTO THRESHOLD , TONE DECAY


Switch Mode Power Supply

capable of withstanding extreme

voltage fluctuations (115 V to 270

V)

INPUT: Tone, Speech, Tape, Pulse

Tone.

OUTPUT: Left, Right, Bone, L + R.

F/F Left, F/F Right, F/F L+R.



Air : 120 dB Max, 125 Hz to 12

kHz., -20 dB Min.

Bone : 80 dB Max, 250 Hz to 6

kHz., -20dB Min.

Noise : Wide Band, Narrow Band,

Speech Band.

Built-in Mike, Ext. Mike, Mike

Sensitivity Control.

Interrupt Lock.

Printer Facility-Sequential Merged

Graphs.

Memory Review.


Computer Interface.

Storage of the patient data in the

hard disc for future reference.

Connectivity to an external USB

Printer to print the reports.



It should meet the international

standards


3. Tympanometry


Should have facility for producing

printed report


01 set



1. SHEA aural speculum – set of 4,

black finish – 3 sets

2. Tumarkin tapered slotted aural

speculum – set of 4 – 3 set

3. Adsonforcep – plain – S.Steel – 6

such

4. Adsonforcep – 1x2 teeth – S.Steel

– 6such

01 set



6. Lempert endaural speculum –

right – 3 such

7. Mollison self retaining mastoid

retractor 3 such

8. Plester self retaining retractor 2x2

prong – 3 such

9. Plester self retaining retractor 3x3

prong – 3such

10. Plester self retaining retractor –

right solid blade – 3 such

11. Plester self retaining retractor –

left solid blade – 3such

12. Farabeuf periosteum elevator –

straight – 3 such

13. Freer’selevator double ended – 3

such


15. Zollner suction tube with 4

microtips – 3 such

16. Verhoeven suction tubes – no.

12,14,16,18,20,22,24 – 3 sets

17. Verhoeven suction tube adaptor –

3 such

18. Micro aural crocodile serrated –


fine straight – 3 such



21. Micro aural scissors – straight – 3

such

22. House dieter malleus nipper – up –

3such

23. House dieter malleus nipper –

down – 3 such

24. Caw Thorne hook – micro pick 90

degree angled – 3 such

25. Caw Thorne hook – micro pick 45

degree angled – 3 such

26. Wullstein needle – very slight

curved – 3 such

27. Wullstein needle – slight curved –

3 such


29. Rosen curette curved straight

shaft – 3uch



32. Circular cutting knife 60 degree – 3


such


34. Rosen elevator for lifting drum –

3such


36. Curved circular cutting knife – 3

such

37. House curette double ended – 3

such

38. House curette double ended

slightly curved – 3 such



41. Mastoid micromotor drill (30000

rpm) 1

42. Straight hand piece for mastoid

drill 1

43. Contra angle hand piece for

mastoid drill 1

44. SS cutting burrs (

8mm,6mm,4mm,2mm,1mm0.8m

m) 1 each

45. Diamond polishing burrs (6mm,

4mm, 2mm 1mm) 1 each


9 STAPEDECTOMY SET


Round Knife 45° diameter 1

mm, length 16 cm

Flag knife

Micro elevator

Sickle Knife, double-edged,

standard model, slightly


Pick 90°, 16 cm, 0.6 mm

Pick 90°, 16 cm, 0.8 mm

Ear Forceps extra delicate,

serrated, 0.4 x 3.5 mm,

working length 8 cm

Ear Forceps extra delicate,

pointed, serrated, 1 x 4.5 mm,

working length 8 cm

Scissors delicate standard

model, blade length 8 mm,

working length 8 cm

Malleus Nipper, extra delicate,

upbiting, width 0.8 mm,

working length 8 cm

Ear Forceps extra delicate, oval

cupped jaws, 0.6 mm, working

01 set


length 8 cm

Ear Forceps extra delicate, oval

cupped jaws, 0.9 mm, working

length 8 cm

Perforator, 16 cm,diameter: 0.4

mm.

Perforator, 16 cm,diameter: 0.6

mm.

Perforator, length 16 cm,

diameter 0.8 mm

Footplate burr

Measuring Rod, length 16 cm,

Marker pins at 3 mm, 4 mm, 5

mm

Holding Forceps, for holding

Stapes and Total Prostheses,

length 13.5 cm

Crimping Forceps for Total

Prosthesis, length 10.5 cm

Scissors, for Total Prostheses,

length 11 cm

Micro Hook, 2.5 mm, 45°,

length 16 cm

Diamond Straight Shaft Burr,

length 7 cm, Diameter 1.4 mm



Seeker, ball end angled 45°,

15.5 cm, size 3.

Suction Cannula, angular, LUER-

Lock, working length 6 cm,

O.D. 0.7 mm- 2 in number

Suction Cannula, angular, LUER


O.D.: 1.0 mm- 2 in number


Lock, working length 6 cm, 1.3

mm- 2 in number







Adaptor, for suction cannulas- 2

in number

Curette, large, spoon sizes 2 x

3.2 mm and 1.6 x 2.6 mm,

length 15 cm


10 ADENO-ADENO-TONSILLECTOMY

01 set


TONSILLECTOMY

1.BoyleDevis mouth gag- 1 (with full set of tongue blades) 2.Draffin Bipod- 2such 3.Magauran plate-1such 4. Tonsil holding forcep-1such 5. Tonsillar knife with dissector - 1such 6.Mollison’s blunt tonsillar dissector and anterior pillar retractor-1such 7.Serrated tonsillar dissector and anterior pillar retractor- 1such 8.Long straight tonsil hemostatic forceps- 1such 9. Naegus artery replacement forcep- 1such 10.Naegus ligature slipper and knot tier- 1such 11. Eve’s tonsillar snare- 1such 12. Long dissecting scissor- straight- 1such 13.Yankauer’s oral suction- 1such 14. St. clair thomson’s adenoid curette with cage- 3 sizes- 1each 15. Long tooth forcep- 1such 16. Quinsy forcep- 1such


SEPTO-RHINOPLASTY






01 set




8. Tilley’s antral trocar and cannula-

1such






14. 2mm osteotome with guard-1

such


16. 10mm osteotome with gurad-1

such

17. Mallet-1 such









MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY

1. Kleinsasser’smicrolaryngoscope-

1such

2. Anterior commisure laryngoscope-

1 such



5. Microlaryngeal cup forceps-

straight, right turn, left turn, up

turn- 1each


7. Microlaryngeal scissors- straight,

right turn, left turn- 1 each

8. Microlaryngeal blunt dissector

with handle- 1 such

9. Microlaryngeal knife with handle-

1such

10. Vocal cord retractor with handle-1

such


12. Microlaryngeal suction with

diathermy- 1such

01 set

13 GENERAL

GENERAL INSTRUMENTS

01 set


INSTRUMENTS

1. AdsonTooth forceps- (5”)-4

such

2. AdsonNontooth forceps-

(5”)-4 such

3. Needle holder- (6”/5”/4”)- 6

each


5. Mosquito Artery forceps-

curved(4”)- 24

6. Medium artery forceps-

curved(5”/4”)- 6 each

7. Large artery forceps-

curved(7”)- 6

8. Right angle artery forceps-

large/medium(7”)- 4


10. Sinus forceps-2

11. Kocher’s gland holding

forceps(6”)- 2

12. Babcock’s gland holding

forceps(6”)- 6

13. Alle’s tissue holding

forceps(5”)- 12

14. Tissue cutting scissors-


straight/curved(5”)- 2 each

15. Medium dissecting scissors-

curved(6”)-4

16. Small dissecting scissors-

curved(4”)- 4


18. Metal suction cannula- 3

sizes( 2.5mm/3mm/4mm)- 4

each



21. Towel clip- 24


23. Sponge Holding Forceps (8”)-

6

24. Catspaw- 4 pair

25. Gallipot-6




14.


1pc


Main Console




4. Should have inbuilt pumps each for Irrigation and

Cooling.

5. Should have multifunction ergonomically designed foot control with light emission for easy identification.

6. Should be able to control Speed / Mode, Forward /

Reverse toggle, Active hand piece change from the Foot control itself.

7. Should have option for remote control Irrigation to


operate from sterile area.



10. Should have provision to connect facial nerve

monitor with the Otology drill.



Hand piece:












11. Should be compatible with Frontal Trephination System.

Microdebrider blades and burrs

1. Straight Blade 0 Degree 4 mm- 01 pc. 2. 40 Degree Curved Blade 4 mm 01 pc. 3. 60 Degree Curved Blade 4 mm 01 pc. 4. 120 Degree Curved Blade 3.5 mm 01 pc. 5. Inferior Turbinate Blade 2.9 mm 01 pc. 6. 40 Degree Adenoid Blade 4 mm 01 pc. 7. Tonsillectomy Blade 4 mm 01 pc. 8. High Speed Diamond DCR Bur 2.5 mm 03

pcs. 9. Tapered Diamond Bur 4 mm 01 pc. 10. Laryngeal Blade 2.9 mm 22.5 cm Long 01 pc.

High Speed Otology Drill (Motor) 1. Coolant Tubing 02 pcs. 2. 7.5 cm Straight & Angled Attachment 01 pc.

Each 3. 1 mm to 7 mm Cutting Bur 01 pc. Each


4. 1 mm to 7 mm Diamond Bur 01 pc. Each Low Speed Otology Drill (Motor)

1. Crura Saw 0.75 mm 01 pc. 2. Perforator 0.5 mm 01 pc. 3. 0.6 mm to 0.8 mm Diamond Burr 01 pc.

Each Automatic Lens Cleaning System

1. 0 Degree Endoscopic Sheath 05 pcs. 2. 30 Degree Endoscopic Sheath 05 pcs. 3. 45 Degree Endoscopic Sheath 05 pcs. 4. 70 Degree Endoscopic Sheath 05 pcs. 5. Finger Switch 01 pc.



SL. NO. NAME OF






Total Amount (in

figure)


Final amount

after reducing buy

back rate


Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection




c. The Real time PCR System must at least have the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :


01pc









e. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine.



Features Specification


Thermal Cycler Mechanism





Uniformity







Excitation Plexing

Should be minimum 5 plex. Should have capability of further increasing the multiplexing beyond 5-Plex in singe tube.

Dynamic Range Should be of 10 orders of magnitude Reaction Volume

10 µl-100 µl





In vitro diagnostics

Real Time In vitro Diagnostics approved validated kits on quoted model


Approval as mentioned above should be available with instrument manufacturer. Instrument should also be In vitro diagnostics certified for use in diagnostic laboratory.

2 Automated

(Multicapillary)

Capillary Electroph

oresis System




c. System should comewithReady-to-rungelcartridgesallowing samplesto be analyzed replacing laborintensiveagarosegel electrophoresiseliminating the need for handling carcinogenic compounds likeethidium bromide.

d. Post PCR samples should be directly analyzed for fragment analysis using

01pc


the system without prior purification of samples.

e. The instrument should be usable for genotyping, restriction digestion, qualitative monoplex or multiplex PCR, PCR-based cDNA library screening and other routine molecular biology applications.







l. The instrument must eliminate the need for a separate Gel Doc system


after Electrophoresis.


3 Biosafety


with accessorie

s


a. The Biosafety cabinets must have International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI certified.




e. SmartFlow Indicator, with Digital airflow verification technology (The balance of downflow and inflow should control the cleanliness and containment – preventing room

02pc


contamination from reaching the BSC work surface and keeping any biological hazards in the BSC work area from escaping out the front opening.)

f. Ergonomic design with 10° Slopped front, preferably with Armrest.



i. Receptacles in the Rear Wall: load capacity of up to 5A




4 Micropipettes (0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.



i. 0.5 - 10μl

ii. 10 - 100μl

iii. 100 - 1000μl



d. The micropipettes should have Spring Loaded Tip Cone for improved ergonomics which should be tight fit to the tip.



g. Ejector withvery low operating force,

02 sets


positioned for perfect ergonomics.



5 Vortex

Mixer Vortex Mixer (with accessories):


b. Should be ideal for applications demanding repeatable results.





01pc





I. 24 to48 numbers vertical Microtube Holder for mixing 0.25 to 2.0mL microcentrifuge tubes / PCR tubes or high-density foam inserts to accommodate 24 to 60 microtubes.

II. Vertical tube holder for mixing at least four (04) 50 ml tubes together.

III. Vertical tube holder for mixing at least four (04) 5 ml (09 to 13 mm diameter) tubes together.

6 Molecular

grade DNAse RNAse free


a. The entire water purification system

01pc


Water Purification System

should be equipped with three part equipments, quoted together by the same bidder, including:

i. A Pretreatment Water filtration reverse osmosis system

ii. A Pretreatment Iron, hardness and particleremoval system

iii. A Molecular grade Water purification system proper.



d. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to be connected in series connection, directly from the pipeline ground-water feed and should be able to deliver output water quality


compliant to the acceptable limit of the feed water of the Molecular grade Water purification system proper(iii) as mentioned below in tight fitted series connection.

e. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to deliver at least 15litres of water per hour to the Molecular grade Water purification system proper(iii).


a. * 2 Stage pretreatment system

b. * 5 micron and 1 micron wrapped type depth filter

c. * 3 Pressure gauges

d. * Less than 50 Db noise levels

e. * Automatic low/high pressure cut off

f. * DC pump with 0-2 pressure at 120L /hr


g. * Inlet screen filter to DC pump

h. * Optional filters : 0.5 micron

i. * Optional filters : Activated carbon

g.The Molecular grade Water purification system proper (iii) should be able to deliver the required quality of pure and ultrapure water from its feed water acceptance level of:




8) TOC <2000 ppb

h.The Molecular grade Water purification system proper (iii) should beable to deliver reagent Grade Type 2 water (pure quality) and Reagent grade Type 1 standard water (ultrapure quality) as defined by standard international quality control organizations like ISO:3696 standards and / or Clinical and Laboratory Standards Institute-Clinical Laboratory Reagent Water standards and / or ASTM standards.


i) The Molecular grade Water purification system proper (iii) should have two different points of delivery. It should be able to deliver through one point of delivery, reagent Grade Type 2 water (pure quality) bacteria and pyrogen free water, which may be used for basic laboratory needs, such as buffer and reagent preparation, microbiology media preparation, histology and rinsing of glassware of the following grade:


Parameter Value













j.The Type 2 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:

1. Pretreatment cartridge

2. Reverse Osmosis with a high flux polyamide membranewith 94- 99% ion rejection backed by Pump with temperature feedback mechanism so that the flow rate should be 3 ltr/hr at room temperature .

3. Electro Deionization with auto regeneration by electric current, eliminating the need for chemical regeneration or replacement of DI resin cartridges with carbon beads at cathode of the EDI module to prevent scaling inside of the module

4. Activated Carbon cartridge


5. UV lamp with 254 nm Wave lengthbefore entering the tank

6. Recovery loop with capillary tube and diaphragm valve to minimize water wastage

7. Carbon beads at cathode of the EDI module to prevent scaling of the module

8. Permeate divert valve which will divert low quality water to the drain

9. Coaxial resistivity cell with a flow through design and a cell constant of 0.01cm-1

10. Display both compensated and non-compensated temperature accurate within ±0.1°C.

11. The reservoir tankshould be blow moulded, cylindrical PE reservoir with a conical bottom and opaque walls with a minimum of 30 litres capacity.

12. Sensor rod float switch, programmed to have high


and low level cut-off based on water level in the tank.

13. The reservoir tank should possess a tank vent filter made of soda lime, activated carbon and 0.22 micron hydrophobic membrane to trap contaminants present in atmospheric air.

14. The Point of Delivery units should be of adjustable height and rotating arm-adjustable to any glassware.

15. There should be multicolour monitor displaying resistivity, TOC, level of water in reservoir, volume dispensed etc.

k.The Molecular grade Water purification system proper (iii) should also be able to deliver through a different point of delivery, Type 1 water (ultrapure) DNA, RNA, DNAse, RNAse free water for molecular biological applications, suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture of the following grade:



Parameter Value











l).The Type 1 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:

1. Water source feed should be a closed connection from the Type 2 water reservoir tank eliminating any possibilities of contamination.


2. Re-filtration through two stage mixed bed ion exchange and activated carbon cartridge to remove ionic and organic contaminants to trace levels.

3. Low pressure mercury vapour lamp made of quartz with 185/254 nm dual wavelength UV lamp.

4. Should contain high-precision resistivity meters with following features-




5)Should contain a built in TOC monitorwith a Quartz celland UV lamp which should accurately measure online TOC from 1- 999 ppb.

6) To prevent deterioration of water quality during periods of non-use, the ultrapure water system will be


able to recirculate water to maintain high water quality.



m.To avoid maintenance errors and to improve traceability, the internal primary consumable water purification cartridges should have a built-in RFID tag.


7 Automati

c Electronic Laboratory Balance

Automatic Electronic Laboratory Balance

a. The Electronic Laboratory balance should have International and/or National quality and safety certification, e.g. CE and/or UL/cUL-listed

01pc


and/or ISI certified.






8 Carbon

dioxide

Carbon dioxide (CO2) Incubator:

01pc


(CO2)

Incubator

Technical specifications


2. Air jacketed heating system with temperature control by microprocessor.

3. Temperature range from ambient +3 o C to + 55 o C.

4. Temp. Deviation with respect to time is + 0.1K.

5. Continuous air Contamination prevention by in chamber Class 100 HEPA Air Filtration.

6. Event based Decontamination with in-built moist heat High temperature cycle, with ease operability, preferably single switch operation of sterilization cycle. The built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc without removing sensor, fan or any other fitting. The system should employ automatic decontamination routine at moist heat of 90o C or equivalent.

7. CO2 control by Microprocessor based & by heat resistant Thermal Conductivity detector to withstand heat of decontamination.








14. Built-in audible and visual water level alarm should be available when the


water reservoir (water tray less system to avoid contamination) needs to be refilled to ensure a constant high level of humidity and to prevent cultures from drying out.




18. Suitable for 230V, single phase 50Hz operation.

19. Suitable servo voltage stabilizer with high voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc.



9 Hot air oven


02 pcs



2. Corrosion-resistant galvanized steel chambers.

3. Digital display and timer facility 4. Upper temperature cut off ( automatic) 5. Microprocessor temperature control. 6. At least 2 tilt proof wire-mesh shelves 7. Chambers and heating elements should

made of corrosion resistant steel. 8. Chambers should be easy to clean. 9. Volume minimum 75 litres 10. Operating temperatures from 50° to

250°C. 11. Easy to use, microprocessor-controlled

touch button operation.

10 Automatic

Evacuatio

n-

replaceme

nt system

for the

culture of

anaerobes

,

capnophil

es, and

microaero


1. Automatic evacuation-replacement system with at least One to Three (1-3) gas inlet connections: CO2, H2, and O2 and One to Four (1-4) jar outlet connections.


3. The System should have pre-

01pc


phile programmed functions with easy to use, preferably single touch key operations for preparing Anaerobic, Microaerophilic and Capnophilic culture conditions.




c. Two (02) equivalent jars: Diameter and height: Ø =175mm, h=240mm (±10%) Volume: 5.65 L (±10%) Contents: 1 stack of 12 Petri


dishes with Ø 14.5cm (±10%)



f. One (01) equivalent jars: Diameter and height: Ø =230mm, h=240mm (±10%) Volume: 9.66 L (±10%) Contents: 3 stack of 12 Petri dishes with Ø 10cm (±10%)


5. Palladium coated catalyst pouches ideal for the big jars:

a. SIX (06) Sets of catalysts, ideal for the big size jars are to be provided along with,


which can be easily re-used by reactivation in Hot air oven.

6. Reducing valve: To reduce the pressure in the gas cylinder to the system working pressure, a reducing valve has to be provided with the gas cylinder(s). This must be a 2-step reducing valve, preferably calibrated and supplied by the same manufacturer, which has manufactured the Automated evacuation-replacement system. The working pressure should be adjustable to 1.8 Bar or 26 psi.

7. Option of user programming function (free user programming of oxygen level, gas mixture and evacuation level) should be there.

8. Option for Preprogrammed recipe for oxygen level, gas mixture and evacuation level should be there.

9. The bidder should also quote for 18Kg CO2, H2, and O2 Cylinders filled with CO2, H2, and O2 gases 99.5% or better purity required for operation, along with cost of refill should also be quoted.

11 Hot air sterilizer,

Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304

2


160ºC

Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system


12 Venereal

Diseases

Research

Laboratory

(VDRL)

shaker


2

13 Macintosh

fields

anaerobic

jar

Anaerobic system






Petri plate carrier

2

14 Dissecting

microscope


2


SL. NO. NAME OF








Final amount

after reducing buy

back rate



1. Chair Unit :

Electrically

operated

programmable

chair, both hand

and foot control

operation, over

hanging delivery

unit, spittoon with

auto flush, High

and low intensity

operating light,

motorized suction

(with auto drain)

X-ray viewer,

three way syringe,

zero backache

doctor’s stool.

01 each


a. Light cure unit : Light

emitting diode (LED)

b. Air rotar with Controlled

box : along with

(i) Air compressor:

Minimum 1.5 HP, Oil free


2 Dental Electro

Surgery Unit

with multiple

tips

Dental Electro Surgery Unit with

multiple tips

01 pc

3 Automatic

dental X-ray

film developer

–IOPA (Intra

oral Peri

apical

radiograph)

automatic

processor

Automatic dental X-ray film

developer –IOPA (Intra oral Peri

apical radiograph) automatic

processor

01 pc

4 Lead apron

for use along

with dental X-

ray unit

Lead apron for use along with

dental X-ray unit

01 pc

5 Electric High

Speed Micro

Electric High Speed Micro motor of about 35000 RPM with reverse forward switch, foot

01 pc


motor control, with Both straight and contra angle Hand Piece.

6 Ultrasonic

Scalar

Ultrasonic Scalar : with four tips

02 pcs

SL. NO. NAME OF









DEPARTMENT. OF RADIOLOGY ESI-PGIMSR, JOKA

1 500 MA X-

RAY

MACHINE

Technical specification of 500 MA X-RAY MACHINE

A 500 mA. Multipulse High frequency X-Ray machine for Radiography. RATINGS: 50KW High frequency X-Ray generator for radiography . Radiography Parameters: 35 to 125KVor150 KV Multi steps as many as possible Small Focus – 100 mA & 200 mA Large focus – 300mA, 400mA and 500mA mAs – 1.25 to 200 mAs in multiple steps as many as possible. Control: Floor or Wall mountable control panel, ON and OFF switches Automatic safety system to block unwanted exposure factors beyond tube ratings. Digital display of active KVP, mA and mAs. Hand switch with flexible long retractable cord. Compact durable soft touch keypad.

01 set(against condemnation)


Table or Vertical Bucky selection and table top radiography switch. Ready and X-Ray on switch with indications. Tube Unit: Rotating anode tube unit with dual focus x-ray tube insert. Anode Speed:- Minimum 2800 rpm. Focal spot:- Dual focus, Small focus:- 0.6mm to 1 mm Large focus:- 1.2mm to 2.00 mm Protection:- Totally thermal Protection. HV/HT cable compatible with X-ray tube. Motorized tube movement with all round tube angulation preferable Collimater: Manual light beam diaphragm. Tube Stand: Floor to ceiling stand and with counter balanced tube head 360 degree rotation (rotatable+/- 180 degree), tube rotation with column axis all round movement ( Longitudinal, Transversal, UP & Down), mounted on floor ceiling rails for convenient movement. Safety lock in case of wire shortage. Ceiling suspension tube preferable. Table: Motorized table with 6 way movement (table height adjustment) . Motorized bucky with grid ratio 8:1 (80 to 100 lines per inch). Stainless steel cassette tray with electromagnetic brakes. Stain free


laminated table top. Operating Voltage: 400-440 volt AC 50 HZ. Three Phase. Chest Stand: Motorized or manual Vertical Bucky Stand with counter balanced. Head to Toe Vertical travel (455mm to 1900mm). Electromagnetic locking method (lock released when switch is pressed). Also separate Cassette holder attachment with the Vertical Bucky Stand for direct exposures. Accessories:- Compression Band, Hand Grip & foot step. Unit should have the AERB approval.


SL. NO. NAME OF










1 NEONATAL

RESUSCITAT

ION UNIT

WITH

WARMER


a. Controlled Resuscitation

system. Oxygen

Administration facility,

Low Pressure suction and

warming with infrared

Radiant Heat Source.

b. Inline Manometer,

c. Oxygen Administration

Facility: i) Oxygen Flow

control facility with flow

meter (o to 15 lit/min).ii)

Oxygen Pressure

Adjustment valve, iii)

Humidifier Bottle, iv)

Facility to keep Oxygen

02 pcs (against condemnation)


cylinder, v) Connecting

hose for wall Outlet. vi)

Silicon Autocluvable

Resuscitation Bag with 00

and 01 size of Masks.

d. Slow Suction: This is a

specially designed

electrically operated slow

suction. Apart from

others, it is non-

motorized slow suction.

The suction pressure can

be adjusted as per

requirement.(0-110 mm

Hg.)

e. Servo Control System to

maintain an optimum skin

temperature.

f. Precise cradle

Temperature control.

g. Manual Warming Facility.

h. Stop Watch- additional

Facility provided to note

down timings during

monitoring various vital

signs of baby, e.g. temp.


Heat rate, Respiration

Rate.

i. Reminder Timer.

j. Apgar Timer with Birth Time

Recorder.

j) a) Power Source: 230 +/-

10% volts. 50 Hz.

B) Control Method:

Micro-Computer

Controlled intelligent

proportionate Power

Control.

c) Heater Capacity: 600

Watts.

d) Light Source: 60 watts

bulb to examine babies.

e) Power Consumption:

850 watts.

m) Temperature Controller Specifications:-

V. Skin Mode Control: From Body Temperature to 38 C.

VI. Air Mode Control: From Room Temperature to 39 C.

VII. Resolution: 0.1 C.


VIII. Accuracy: +/- 0.2 C. n) Alarms: (Audio visual with auto Reset facility) Alarm Condition

Message on Display

Skin + I.C.

HI

Skin - I.C.

LO

Air +1.5 C

HI

Air - 3 C

LO

Skin >38C

OVER

Air<39C OVER Skin/Air Sensor Failure Fail Heating system Failure HEAT OFF o) Safety Cutoff; When Skin Temperature exceeds 38C. When Cradle Temperature exceeds 39C. p) Power Failure Alarm: Audio –visual. q) Distance between Heater source and Baby: 88 (34.5)


r)Dimensions: Height X Width x Depth-cm (inch) 203 (80) X 63.5(25) X 100 (39.5) s) Baby Tray: Length 72 (28.3) x width 45 (17.7) t) Should have 1 drawer system attached with the equipment for storage facility. w) It should be in compliance with ISO 9001:2000. Should have Q.A. International Certification Limited.



Unit should have blue cool led light

source with wave length of 450-460

nm.



No Heat Generation.




Height and Angle Adjustment

facility.

Mounted on Castor Wheels for Easy

Mobility.

Can be used in Conjunction with any



make radiant Warmer.


Irradiance> 60 u/W/cm2/nm.at 45

cm from the light source.

Wavelength 450-460 nm (peak 455

nm free of UV and IR radiation.

Height adjustable from 1198+/-20

mm to 1680+/-20 mm

UNDER SURFACE SOURCE

UNIT:

Unit should have blue cool led light

source with wave length of 450-460

nm.


Light intensity is variable from 7-60

um/nm/cm2.at a distance of 45 cm.

Infant care Trolley in Stainless Steel

Specification:-


Convenient working level with 6 mm

thick imported acrylic collapsible

side support, accessible from all

sides.

Acrylic Tray with Foam mattress. IV

Pole & Facility to take X-ray.



Stand with separate Infant care

trolley.

Mounted on 4” castor wheels for

easy mobility.

Infant care Trolley with transparent

acrylic bed and bubbles mattress for

baby. Fabrication in mild steel, baby

bed area in Stainless steel.

3 CPAP

MACHINE SPECIFCATION OF CPAP MACHINE SYSTEM: Valve based continuous flow CPAP and IPPR. Bubbler based bubble CPAP. DISPLAYS: Digital and Analog Display of CPAP pressure in CPAP Mode. Continuous Digital display of Delivered pressure in IPPR Mode. ALARMS; CPAP High and low

Alarms (Audio Visual)

PRESSURE GAUGE: -20 to 100 cm

H2O

GAS MIXNG: Air-Oxygen Mixer

using calibrated Rotameters.

AIR SOURCE: Inbuilt Air

Compressor (Optional) (20 to 90

PSI).

O2 SOURCE: Inlet for Oxygen Gas

(20 to 90 PSI).




Asccessories: Warmidifier,

Breathing Circuits(Disposable).

CPAP Interface, Nasal Prongs,

Dummy Test Lung.


SL. NO. NAME OF









Department of Biochemistry 1 SEMI

AUTOMATED

BIOCHEMISTRY

ANALYZER

SPECIFICATION FOR SEMI AUTOMATED BIOCHEMISTRY ANALYZER. I. Item : Semi Automated Biochemistry Analyzer with UPS 0.5 KVA. II. Analysis Option: a. Absorbance b. 1 point end linear & non linear. c. 2 point end linear & non linear. d. Rate linear & non linear. e. Immunoturbidimetry. OPTICAL SYSTEM III. Light Sources: Pre aligned Quartz halogen lamp. IV. Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice. V. Measurement Time : Selectable.

01 pc


CUVETTE SYSTEM Cuvette : a. Flow cell Cuvette. b. External rectangular Cuvette. VII. Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C. VIII. Aspiration System: Motor driven pump. IX. Aspiration Volume: Programmable. X. Cuvette Blanking: Automatic. FUNCTIONS

XIII. Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system, selection through keyboard. XIV. Calibration: Automatic against standard / calibration. XV. Quality control: a. 2 levels of control (at least) b. Levey - Jennings diagram. c. Manual entry of QC result.


XVI. Memory Storage: a. Minimum 200 patients result. b. Calibration result. c. Quality control result for 01 month. XVII. Display: a. Graphic LCD. b. Display of reaction curve, absorbance, temperature. c. Display of result of real time. d. Graphical display of reaction time. e. Calibration curve graphical display. XVIII. Key board: a. Chemical and moisture prevented single touch alphanumeric

membrane key panel.

XIX. Printer: a. Built in thermal printer with full graphic facility. b. Parallel full page ink printer with formatting options. XX. Reporting format: a. Conventional b.SI unit(Optional/Interconvertible).

OPERATOR INTERFACE

SOFTWARE


XXI. Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength. XXII. Automatic Flagging: a. Absorbance and linearity cheek. b. Reagent stability. c. Substrate depletion. XXIII. Peripheral interfacing: a. Parallel ports for external printer , keyboard and PC. Software PC Compatible. XXV .Power Cord : Indian Type 3-pin power cord locally available and replaceable . XXVI: Dust Cover : Washable dust-covers for main unit and key-board, etc. XXVII: Working Manual :

Working Manual by manufacturer in original

2 HbA1c

analyzer Specification for HbA1c analyzer Analytes HbA1c Principle HPLC Technology Sample Volume Less than or equal to 3ml. Sample loading Should load (50-60) samples

01 pc

ADDITIONAL


simultaneously capacity with continuous loading facility. Throughput < 8 minutes per sample Assay time Minimum Assay Time Assay Should be able to detect correct HbA1c values in the presence of commonly occurring abnormal haemoglobin variants. Primary tube sampling Facility should be there Calibrators External /Internal Control Control should provide External /Internal normal and abnormal control. Check facility Should be able to check all system parameters (cartridge, reagent, waste etc) CV < 3% Approvals Any two approval from the following CE / FDA /IFCC/NGSP approvals

3 Test Tube rack

_________________________ 20 pcs


Water Bath Rectangular: Thermostatic control /; Boiling Water baths, with lids having 8-12 Holes with shaker Specification: Temperature range from ambient to 950C. Thermostatic control with an

01 pc


accuracy of +/- 10C. Double walled with inner wall of stainless steel and outer of MS powder coated, with lids of SS. The unit is provided with immersion type heaters to work on 220 V.A.C. The unit is supplied with indicating lamps. Main chord and Plug. Size of the inner chamber- 355x100mm; 1.5kw with shaker.

5 Colorimeter Specification:Photoelectric colorimeter with filter Digital Colorimeter - Highly Stable & accurate Ideal Clinical instruments for Blood & Chemical Analysis. Models Available ME 953 C 5 Filter ME 954 C 8 Filter ME 944 C 8 Filter With Battery Option. Range : 400 nm to 700 nm Filters 5 High Standard Filters, Accuracy ± 0.02 O.D., Reproducibility ± 0.01 O.D., Out Put Optical Density 0 to 1.99, Display 2 ½ Digit LED Display, Detector Selenium Photo Cell, Light Source 6.2 V 0.3 Amp. Tungston Filament Lamp, Min. Volume 1 µl., Power 230 V ± 10% 50 Hz AC, Size (LXBXH) 225 x 230 x 150 mm, Weight 4 kg. (Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.

4 Nos


SL. NO. NAME OF








Final amount after reducing buy back

rate

DEPARTMENT OF PHARMACOLOGY

1. Cannula-made of corning glass (Arterial- hollow bulb with three arms, Venous–hollow glass tube- 4-5cm length & 3-4 mm diameter Syms cannula)

10 each

2. Four Unit isolated organ bath palmer F.67 For Internal Organs with stirring arrangements, made of transparent acrylic sheet, chemically welded to make leak proof. Complete with uprights, organ & oxygen tubes, capillary tubing, and frontal lever etc.Temperature by immersion heater and control by thermostat.

1

3. Dissection instruments and injection syringes as required Sets containing surgical standard scissors-2, curved scissors-2, pointed scissors-2, artery forceps-2, Mosquito artery forceps-2, scalpel handle-2, plain forceps-2, toothed forceps-2, small retractors-2, etc. Probes-2, hooks-2. To be supplied with proper cover and box.

1

4. X-blocks as required(Open and Closed) Machined from solid Brass rod, richly chromium plated to hold 9mm, 6mm and 12.5 mm rods

10 each

5. Hook grip rods as required- Should be suitable to fit in an X-block

25

6. Plain stand 25


7. Hair Aesthesiometer-Palmer W.290 1

8. Copper Trays (10”x8”x1”) 25

9. Microscopes ordinary - With fixed bright filed two lens condenser and iris diaphragm, heavy metal stand with triple nose piece. Coarse adjustment by rack and pinion and fine adjustment by precision grade slow motion arrangement in a beautiful storing cabinet - Total magnification 675 x Eye pieces H10x, H15x Objectives 10x, 45x (spring loaded)

2

10. Chemical Balance – Sensitive Balance beam scale, capacity: 120g/0.01g 220g/0.01g 320g/0.01g 1200g/0.01g 2200g/0.01g 3200g/0.01g. Power AC/DC with lithium battery. Display: LCD/LED with back light. Fan size: diameter 130mm.

1

11. Skin and Rectal Thermometer Barun -

1

12. Starling's or Heart Lever:-This lever is used to record the contraction of heart. The differences between this & other isotonic levers is that fulcrum lies at one end beyond the point of attachment. It consist of a frame carrying a light lever arm with holes and notches supported by a fine adjustable nickel silver spring attached to an adjustable hook.

2

13. Microscope with mechanical Stage and oil immersion

2

14. Frontal writing lever - This lever is designed in such a way that the

2


writing point rotates freely about its axle. This helps in reducing the tension between the smoked paper and the recording tip. The contraction are recorded as straight line

15. Fixit lever - the levers can be fixed to the spindle in the center p f which a vulcanite spindle on one of these pins lever fits, sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustment are made.

2

16. Colorimeters 1

17. Condon’s Drop Recorder-Palmer B-75

1

18. Jacquets graphic chronometer 1

19. Museum drugs specimen boxes rectangular, acrylic with cover. Sizes:- 9”x5”x4”(inch)& 6”x4”x3”(inch)

50 each

20. Microscope lamps - standard quality 2

21. Multimeter 1

22. Operating Table- JKA-172 : Suitable for Rabbits, Rats, Guinea Pigs and such like small animals. Top is of Stainless Steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers.

1

23. Instrument Trolley (30”X18”X30”) 1


24. Instrument Trolley( 48”X24”X30”) 1

25. Manometer mercury glass U-tube (5 mm bore , two vertical limbs 30 mm height half filled with mercury (upto 250 mm of Hg)

2

26. Tracheal cannula metal ( z-shaped & y- shaped)

2 each

27. Bull dog clip 10

28. Rat holder- single u and ring pattern 38 mm with Universal joint

2

29. Mercury manometer –Meriam, All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly, lapped to eliminate leakage and are fitted with feather weight stainless steel capillary. Standard Mercury Mercury Manometers: Without stopcock, with adjustable scale.

2

30. Autoclave electric-small 1

31. Sterilizer electric size 12”x8”x6” 1

32. Stimulator electronic Arthus Thomas- Selectable pulse per second in different steps and pulse with, continuous variable volt in multiple of 1 and 10 with internal, external and single pulse mode

1

33. Flame Photometer 1

34. Manomet

ers

Mercury

All Manometers are

fabricated from true-bore

Borosilicate glass, floats are

perfectly, lapped to

eliminate leakage and are

fitted with feather weight

1


stainless steel capillary.

Standard Mercury

Manometers: Without

stopcock, with adjustable

scale.

35. Marey’s

Tambours Traditional (5cm to 10cm

diameter)

2

36. Physiogra

phs with

transduce

rs,

couples

and other

relevant

accessorie

s

(Earthing chord, chart

paper, ink pen, ink etc.)

Recording system,

amplifier, different couplers

like bio potential, EKG,

strainage, pulse

respiration, temperature

and isotonic couplers,

speed selection is easy and

instantaneous. Channel

width is 70 mm, Ink writing

pen is 120 mm in length to

minimize arc distortion.

Main Amplifier is fitted in

the console having switch

selectable sensitivity range

from 50 microvolt per cm to

100 milli volts per cm in

eleven steps as

50,100,200,500 mv/cm

and 1,2,5,10,20,50,100

mv/cm.

1


37. Kymograp

h

(students)

Electrical

independe

nt unit

Electrically driven

recording drums suitable for use by students for general experiments. Drive

mechanism consists of Constant speed electric motor and accurate Gear-

box contained in the base together with robust plate

clutch. Engagement of various gear ratios are effected by sliding the lever

into the slot marked with surface speed or by a knob

in separate models. Main cylinder and Stainless Steel spindle have been

standardized to make the same universal and interchangeable. Double

electric contact arms are clamped on the main

spindle and a stout double-contact block is fitted on top of the base. Gear ratios

i.e. 640 mm, 320 mm, 25mm, 12.5mm, 2.5mm,

1.2mm, 0.25mm, and 0.12mm per sec, are effected by sliding lever into

the slot marked with 8-surface speeds. Highly accurate speeds

Auto concentration curve (crc) mode and

normal mode.

23


Sturdy body

Corrosion resistant

Low power

consumption


Easy height

adjustment

Writing lever


Isometric Lever

Vibrating read,

variable interrupter Time marking – tuning fork

(100 hz), spring time

marker, electromagnetic

time marker

38. Tracheal

Canula

Metal

Made of Brass with

adjustable Air-vent.

Should be able to use for

endo-tracheal intubation of

big animals like Dog & Cats

4

39. Weighing-

Machine

for small

animals

like rats

and

guinea pig

Animal weighing scale;

Livestock scale: slip proof-

pan, waterproof-design,

with railing and door. High

legs for rough ground

2


40. Weighing-

Machine

for big

animals

like cats

and dogs

Animal weighing scale;

Livestock scale: slip proof-

pan, waterproof-design,

with railing and door. High

legs for rough ground

1

41. Apparatus

for

isolated

rabbit

intestine

A Cylindrical copper bath

with heating element

controlled by thermostat.

Complete unit with

uprights, glass inner vessel

and oxygen tube with

platinum tip frontal lever

from SS capillary tubing,

fitted on teak base board

25

42. Animal

trolley

with 12

cages

Fabricated from 1 square

hollow pipe and angel of

S.S. 304 quality material.

The racks are mounted on

four heavy duty 4, dia

castors for easy handling

and quiet transportation.

Complete with argon arc

joints and mirror finish.

Available to hold 24 animal

cages of size: 29X22X14

cms. (LXBXH). Rack size:

39X12X60 (LXBXH).

1

43. Dissectio

n

Sets containing surgical

standard scissors-2, curved

1


Instrume

nts scissors-2, pointed

scissors-2, artery forceps-2,

Mosquito artery forceps-2,

scalpel handle-2, plain

forceps-2, toothed forceps-

2, small retractors-2 etc.

Probes-2, hooks-2,. To be

supplied with proper cover

and box.

44. Frog

Boards ____________________ 25

45. Stop

watches

Digital – Digital Stop

Watch, Digital Stop Watch

is perfect for any laboratory

applications. The large

LED display, high

resolution enhances the

functionality in several of

situations. These are

available in two ranges as

per specification. Range

1:99:59:59 Hrs:Min:Sec.

Resolution: 1 sec (for range

1) Min:Sec:Milisec. Range

2:99:59:99 Hrs: Min: Sec

Resolution: 10milisec (for

range 2) Display: 6 digit

LED Display Alarm: Buzzer

after set time.

6


46. Chemical

balance-

ordinary

apothecar

y’s

Best quality with divided

doors show case, capacity

250 gms. Sensivity 1-2

mgm having all stone

agates fitted in open

graduated beam

1

47. Pill tiles ______________ 30

48. Porcelin

dishes

______________ 30

49. Pestle and

Morter

______________ 30

50. Iron

spatula

______________ 30

51. Horn

spatula

______________ 30

52. Galli

pot/oint

ment pot

______________ 30

53. Glass rods ______________ 100

54. Plethysm

ograph

assorted

High Resolution

Volume.

Resolution: 0.01 ml,

Accuracy+/-0.01ml. Easy to use pedal

switch. LCD Graphic

Display

1


55. Antihista

mine

chamber

with

manomet

er

Should be a complete

Histamine aerosol

apparatus having a acrylic

box with nebulizer

sphygmomanometer and

chloroform bellows for

assay of antihistamine

drugs on guinea-pig etc.

1

56. Actophoto

meter

(activity

cage)

The frame is equipped with

32 infrared photocells, 16

placed in axis X and 16

placed in axis Y. The

Photocell work at a

wavelength of 950 nm and

its information is

multiplexed at a rate of

40Hz. Hole board plate is

provided with 16 holes of

diameter and detection

depth. It should contain

incorporated electric facility

(variable) 0 to 100 volts for

activating rats and

indicating on meter.cm

1

57. Rotarod

Assembly Should have 5 chambers, 75 mm width each with a

rotating rod of 25mm diameter having speeds of 5.10 to 15.20 and 25 r.p.m.

Digital rpm indicator and digital time

1


counters.

Each counter runs from the beginning of

the test until the animal falls from the drum to the lane.

Electronic change of speed

from 4-120 rpm.

58 Electro

convulsio

meter

Should be able to use for

producing minimal and

supra minimal seizures

required for assaying of

anti-epileptic and

anticonvulsant drugs.

Should provide minimum

50Hz stimulus current

which can be adjusted

0.15mA to 330mA in steps,

with one pain corneal

electrode 4,6 or 8mm cups.

And one pair of ear clips

work on 220 AC. Should

contain electronic timer

device from 0.1 to 3

seconds in steps to control

the stimulus current and

LED indicator for duration

of stimulus.

1

59 Analgesio

meter

Thick pure aluminum

plate (12mm) provides a very high

1


temperature stability

and even surface distribution.

Plate temperature can

be held at a set point between above

ambient to 70 degree C (+/-0.2 degree C).

A built-in timer

activated by an external foot switch

allows the precise measurement of the

reaction time (0.1 sec resolution).

Remote foot-switch

controls the test start/stop allowing

rapid Hands-free experiments.

Provided with the

calibration certificate of the


60 Cooke’s

pole

climbing

apparatus

Should be having 2 (two)

chambers, an outer

chamber made of thick

plywood sheet with an

observation window and

inner animal chamber

made of clear acrylic sheet

with a brass bar at the

bottom. A built in shock of

200V AC, 50 Hz single

1


phase with min of 0.2mA

and is to be controlled by

min of 11 position solid

state timer up to 30

seconds. Should be having

output terminal for

kymograph recorder.

Animal dropping tray to be

provided to keep the

equipment clean.

61 Metabolic

cage

(diuretic

study)

Classic metabolic cages

with electronics to monitor

the receptacles for food and

water. Each may be

removed without disturbing

the animal. Optional

infrared beam arrays

(similar to those of the

Activity Cages) can be

mounted on either side of

the cage to monitor

coordinate activity and

rearing behavious. Each

cage is comprised of

interchangeable parts

which can be cleaned in a

standard vivarium wash

station.

6

62 Tablet

Disintegra

Hooper diameter of

minimum 2”. Should be

1


tion

machine

glass

tubing

(length of

6ft)

fitted with min 4 steel

hammers fixed to a disc

and Shaft being revolved at

the speed of 3000 RPM.

Rotation in vertical manner

is made by EHP Motor

which carries a specially

designed Basket to hold 6

nos. of Tablets/Capsules

under specified weight,

moving vertically in

temperature controlled

glass vessels/Beakers

placed on Hot Plate.

Having special type of

starter facility operatable

on 220 volts AC supply.


SL. NO. NAME OF






Total Amount (in

figure)


Final amount

after reducing buy

back rate


1 Monitor for Continuous Measurement of Cardiac Function


1. It should be arterial line based continuous

monitoring device for Cardiac output, Cardiac

Index, Systemic Vascular Resistance and

Stroke Volume.

2. It must be supplied with good quality display

device and ten Flotrac and necessary catheter

system.

3. The device should be compatible with Flotrac

sensor system

4. Necessary accessories should be supplied for

systemic vascular resistance measurement


01 pc



1. It should be auto-calibration based arterial-

venous line based measuring device to

provide continuous measurement of ScVO2,

SvO2 , Extra vascular Lung water index and

Ejection fraction as well as End Diastolic

01 pc


volume of heart

2. The monitor should be supplied with 10 (ten)

relevant and related sensors for

measurement of hemodynamic variables

3. Suitable display and storage device for data

should be supplied



D. Instant Hand held blood pH and Lactate monitor:

1. Portable, cartridge based hand held device

capable of measuring blood pH, Lactate and

other variables such as Troponin, Ionised

Calcium, Prothrombine Time, Creatinine

Kinase-MB and Brain Natriuretic Peptide

2. Measurements should be quantitative in

nature

3. It should be supplied with wireless based

printer and electronic simulator for

calibration


01 pc


E. Lumber Puncture Simulator with Epidural block trainer:

1. The device should be a 3D image guided one

suitable for training of epidural needle

insertion

2. It should be based on real time motion

picture based capturing system with display

01 pc


of procedure on screen

3. The system should be capable of evaluation

of trainee’s performance

4. All relevant interfaces and accessories should

be supplied with the simulator


5 Spinal

Injection Trainer

F. Spinal Injection Trainer: 1. Mounted trainer should be able to be used

multiple times

2. It should be supplied with three sets of

accessories like fluid bags and simulators

3. One vertebrae must be visible for proper

identification of performance site

4. Trainee should be able to be guided by

perceptible tissue resistance while going

through different levels of tissues


01 pc


6 Central Venous Catheter Simulator

G. Central Venous Catheter Simulator: 1. Simulator should have life like anatomical

structures for identification of parts related

to central venous catheter insertion

2. It should allow trochar and guide wire

insertion for complete training

3. Device should be supplied with five

replaceable skin pads for each site of training

4. It should be supplied with all accessories like

artificial blood (two units), fluids, spare

vessels (two numbers), battery and other

relevant items

5. Facility to check correct position of catheter

placement should be there


01 pc


H. Cricotracheotomy trainer: 1. It should be able to train routine as well as

percutaneous tracheotomy procedure

2. It should have easily palpable anatomical

land marks for identification of structures

3. Trainer must be steady in nature and should

be supplied with five sets of spare skin for

cricotracheotomy


01pc

8 Peripheral Nerve

I. Peripheral Nerve Stimulator/ Locator: 03 pcs


Stimulator/ Locator

1. The device should be able to locate nerves

percutaneously through electrical stimulation

based technique

2. It should be able to be used with monopolar

as well as bipolar based stimulation

technology

3. Current intensity preferably be between 0 to

60 mA and stimulating impulse upto 1ms

4. Should be able to measure and display actual

current passing through tissues

5. It must be supplied with insulated cannula ,

ten in number each for size 22, 24 & 25 G as

well as re-chargble battery and charger.

6. Needle quality should be able to give best

image under ultrasound guided procedures


9 Multi-

frequency based deep heat generator

J. Multi-frequency based deep heat generator: 1. Equipment should be multi-frequency

based dual outlet heat generator using long waves with a emission frequency range between 450 to 500 KHz

2. It must have coupling system of capacitive and resistive therapy system for heat generation at different depth of application area

3. Electrode pairs and handle tips with various diameters such as 30,50 and 70 mm

01 pc


must be supplied with the equipment




K. Airway management Trainer: 1. Trainer must have good quality land marks

of upper airway and pulmonary structures for proper identification during intubation training.




01 pc



1. It should be able to be applied to patients of

all age groups and necessary

probes/accessories to be supplied in two in

numbers for each age group

2. It should work even in low perfusion status

and should be least interfered by electrical

disturbances

3. It should be able to provide pulse variability

index, blood hemoglobin and methemoglobin

level non-invasively on continuous as well as

01 pc


point of care basis

4. Perfusion index should be between o.o2 to

20%

5. Waveforms and/or digital display mode of

presentation


12 NUCLEO

PLASTY SYSTEM

1. It should work on principle of Co-

ablation

2. It should work through generation of

bipolar Radiofrequency without

requiring grounding

3. Terminal end temperature generation

must not be above 70 degree C

4. It should be capable of being used in

both Lumber and Cervical region

5. Supplied probe must have depth

penetration marks and stop lock for

safety and control.

6. It must be supplied with 17G (6 inch)

and 19G (3inch) accessory needles, 5

needles of each size. Respective size

Probe also to be supplied.

01 pc


SL. NO. NAME OF






Total Amount (in

figure)


Final amount

after reducing buy

back rate


1 Clinical

thermomet

er

Traditional type 2

2 Stykar

autopsy

saw with

accessories

Light weight equipment, 10 feet cord with hospital grade plug -should cut bone easily to minimise operator fatigue - Saw should be attached to HEPA bone dust collector.

2

SL. NO. NAME OF






Total Amount (in

figure)


Final amount

after reducing buy

back rate


1 Horrock’s

Apparatu

s

(Complet

e set with

chemicals

&

_____________________ 01 pc


Manual)


DEPARTMENT OF HUMAN PHYSIOLOGY SL. NO. NAME OF





Unit Cost (to be filled in by

tenderers)

Total Amount (in

figure)




1


Sheet II for Consumables & Accessories and CMC

Please refer to Sl.No. M of Annexure II (Special terms & conditions)

SL. NO.




Consumables & Accessories

Unit Cost For each

item

Expected life of the equipmen

t

CMC rates for Post-Warranty

next 5 consecutive years


Workstation (with multiparameter patient monitor)


a. The unit should have primary connection for central medical gas supply for O2, N2O and Air.

b. Provision for back up emergency supply through pin indexed O2 and N2O small cylinders.

c. Electronically controlled gas mixing and delivery system.

d. In case of O2 failure, the machine should automatically switch over to Air.

e. Audio visual alarm for O2 failure.

f. Accurate control of minimum 25% O2 in fresh gas (through sensitive oxygen ratio controller) up to flow of > 1 L/min, in


presence of N2O. At least 250 mL/min of O2 for low flow and minimal flow applications (fresh gas flow < 1 L/min).

g. Should be capable of accurate fresh gas delivery of up to 500 mL/min for minimal flow applications.

h. Ergonomically located integrated emergency O2 flush with self returning valve.

i. Should have single user-interface of at least 30 cm color display and electronic fresh gas doing for adult, child and neonate modes. The same user-interface should control and display all parameters including control of ventilator modes, display of pipeline and cylinder pressures, FiO2, ETCO2, airway pressures, tidal volume, minute ventilation, fresh gas flow, etc.

j. The user-interface should have configurable screen layouts for individual screen setups.

k. The machine should have fully automatic menu driven self test and user check list. In case of emergency machine startup, it should be possible to bypass the self test completely.

l. The system leak test should be done through the Y-piece of the circle system and should not require user interaction during the test.

m. O2 safety flow adjustable from 0 – 12 L/min,


through the vaporizer for emergency back up use.

n. Machine should also have an independent fresh gas outlet for connection to external circuit (Bain's circuit and Magill's circuit).

o. The machine should have a configurable nitrous-oxide-free operation (in case of necessity).

p. Fresh gas flow setting 50 mL/min to 12 L/min.

q. It should have the indicator to show the efficiency of fresh gas setting while used in low flow and minimal flow.

r. In the event of complete loss of external electric power and internal battery failure, it should be possible to manually ventilate the patient at 100% O2 and deliver anesthetic agent.

s. Major and critical components to be made of corrosion proof and durable metal alloy.


a. Electronically controlled, electrically driven ventilator should not require any driving gas or pneumatic power for its operation.

b. Ventilator should be suitable to ventilate adult, child and neonate without changing


ventilator bellows.

c. Ventilator should have fully automatic calculations and preset of patient specific ventilation settings based on ideal body weight of the patient.

d. Automatic breathing circuit compliance correction. Bellow should be enough light weight as not to offer any constant PEEP.

e. Modes of ventilation: Spontaneous ventilation, Manual ventilation, IPPV with plateau adjustment from 0 – 60 % of inspiratory time, PLV (pressure limited ventilation) with decelerating flow, Pressure controlled ventilation, SIMV-VCV, SIMV-PCV, Pressure Support (PS), PS with CPAP, PS with SIMV (CMV/PCV).

f. Should be upgradeable to Volume assured mode - autoflow – delivering set tidal volume at minimum airway pressure.

g. Peak inspiratory flow up to 150 LPM.

h. Tidal volume adjustments from 20 mL to 1400 mL (upgradeable to minimum 5 mL).

i. PEEP from 0 – 20 mbar, electronically adjustable.

j. Respiratory frequency 3 – 100 /min.

k. I:E ratio: 5:1 to I:99


l. Should have the capability to ventilate with atmospheric O2, in case of O2 and power failure.

3.Circle breathing system, Circle absorber: a. Compact circle breathing system suitable

for standard, low flow and minimal flow with minimum patient circuit volume including circle absorber (approx. 3 L, excluding reservoir bag) for fast response to change in fresh gas compensation.

b. Fresh gas decoupled / compensated breathing system for adult and children.

c. Integrated warmer in circle absorber for breathing gas conditioning and prevention of water condensation inside the circle system.

d. Breathing gas inlet and outlet of the circle system should be fitted with reusable (autoclavable) bacterial-viral filter.

e. Should have facility of gas sampling from the breathing system.

f. Manual APL on circle system valve with direct setting of release pressure.

g. Easy to fit and change circle absorber canister of about 1.5 L capacity.

4. Vaporizers: a. Temperature and pressure compensated


and flow interdependent vaporizer for Sevoflurane (1 such) and Isoflurane (1 such).

b. Vaporizer should have extended delivery range from 0 – 6%.

c. Vaporizers must have selective interlocking safety mechanism to prevent simultaneous operation of two vaporizers.

d. Should have transport lock and provide hermetic sealing of agent chamber during transport and storage.

e. The vaporizer should require no calibration in its life cycle.

5. Safety features and alarms: a. The machine should have adjustable alarm

limits for all the parameters with auto set alarm function.

b. The machine should have automatic display of MAC/MACx values and automatic activation of low agent alarm

c. Airway pressure low limit should automatically change with PEEP setting changes.

d. Continuous monitoring and display of tidal volume, airway pressure, ETCO2, FiO2 (paramagnetic O2 sensor), anesthetic agent


concentration (with automatic identification of anesthetic agent), lung compliance (VCV modes).

e. Graphic display of curves and loops with fast analysis of change in lung mechanics provided by simultaneous display of reference and real time loops.

f. Bar graph display of tidal volume (inspiratory and expiratory volume).

g. Trending for alarms and measured values with graphic trend display.

h. The machine should calculate agent compensation and agent uptake by patient on a case to case basis and display total fresh gas consumption in the electronic logbook of the machine.

6. Accessories to be provided: a. Should have at least 3 pc of RS232 connectivity

port to communicate with patient monitor or HIS for automatic data transfer.

b. Pin indexed yokes for O2 and N2O (one each)

c. The machine should have externally-fitted water and moisture trapping chamber (large capacity) fitted to the medical air pipeline inlet.

d. Trolley with drawer.

e. Floor mounting with durable caster wheels with


brake.

f. Writing surface.

g. Color coded and DISS coded pipeline connections and hoses for O2, N2O and Air.

h. Adult and Child breathing circuits (autoclavable).

i. Anesthetic face masks (silicone, latex free).

j. Water traps and sampling lines for gas analyzer.

k. Semi closed breathing system for adult and child (latex free).

l. Cylinder key (2 such) chained to the machine, near the cylinder yokes.

m. User manual.


a. All the components of the of workstation (anesthesia gas delivery unit, vaporizer, ventilator, circle absorber and circle system), should be manufactured by the same agency to maintain uniformity of parts and efficient after sales service.


c. Physical demonstration of the quoted model is


mandatory.

d. Must have CE certification (EN 60601-2-13) w.r.t the essential requirement for safety and performance of the anesthesia workstation.

e. The comprehensive warranty will be 5 years (including all spares and labor) from the date of satisfactory installation of equipment. Also quote rates for comprehensive CMC (including all spares and labor) for 6th to 10th year, after expiry of warranty period. Cost of spares, accessories and consumables should also be quoted separately.

f. Within the warranty period, substitute working equipment of same model and make must be temporarily provided by the supplier free of cost to cover for any downtime exceeding consecutive 48 hours.

g. Facility for good after sale & service with trained engineers posted in Kolkata.


2 Multi functional Surgical OT table ( C-arm fluoroscope compatible ) with electronic control


Should be a mobile universal operating table with Direct motor driven adjustment of height, lateral tilt, Trendelenburg/anti-Trendelenburg.

It should be 100% oil free. Should have a longitudinal adjustment of 250 mm. Should have pneumatic spring support for leg section

and back section. Adjustment of the column functions should be

electrically Motorised via cable remote control Should have additional operating panel with status

indicators for tabletop orientation on column. Should have built-in electronic interface to allow

remote diagnosis and software updates via modem. Should have maintenance-free battery, integrated in

the column, which can be charged via a separate charging cable that also serves for direct mains operations if needed.



Completely X-ray translucent tabletop.


Pads should be integrally foamed, electrically conductive, soft and detachable, Velcro-free system for optimum hygiene and durability.


Should have foot switch for brake. Should have H – shaped base providing a plenty of

space for the surgical team's feet. Tabletop frame, column cladding, side rails and

running gear frame should be made from disinfectant-resistant, easy to clean stainless steel.




The systems should be quoted with following General accessories :





1. Knee Arthroscopy adapter 2. Radial clamp 3. Leg holder 4. Side rail extension & adapter

5. The table should be USFDA, & CE and UL certified 6. It should be meeting international standards for

medical and electrical safety standards;

3 Cardiac Biomarker

Analyzer (Card-based

Quantitative Assay):


a. The card-based portable Cardiac Biomarker

Analyzer should be able to quantitatively

measure the following parameters: Troponin I,

BNP, CK-MB, Myoglobin, D-Dimer, using

Fluorescence Immunoassay Technology.

b. The analyzer must be small in dimension and

portable system.

c. The analyzer must be easy to operate, intuitive

user interface, requiring minimum technical

training of the operator.


d. The unit should operate on AC adapter and also

on inbuilt Li-ion battery backup.

e. The sample requirement must be less than 300

micro liters for a given panel of test.

f. The single-use test card should be self contained

with all the reagents, sensors & calibrating

solutions required for the test.

g. The system should have inbuilt memory

capacity of at least 500 test results with date and

time.

h. Operating temperature range between 18 and 30

degree Celsius.

i. The system should be provided with an in-built

thermal printer.

j. The system should be able to interface with HIS

and LIS software.

k. Should have built in QC check facility for the

instrument.

l. Should be able to perform all the quantitative tests

of a single sample in less than 20 minutes.

m. Should be US FDA certified and CE marked for

all the main equipment as well as the accessories

and kits used.


4 The Endoscope Drying Cabinet





4. Drying time = 120 minutes or less. 5. Storage time = 160 hours or more. 6. Power supply: 230V x 0.9 A, 50 Hz, AC. 7. Power consumption should be less than 150

watts. 8. Air supply: compressed air pressurized

medical grade dry air, internal pressure 3 – 8 bar, dew point = - 43 degree C.



11. Cabinet doors must be lockable, with user access control to prevent unauthorized access.


5 ELECTRO SURGICAL UNIT


The Micro-processor based isolated Electro Surgical Unit should be compatible with Argon Coagulator system, designed for all kind of General Surgeries with both monopolarand bipolar modes. The following features are required 1. The unit should be entirely microprocessor based. 2. Machine should have LED displays. 3. “Highest power efficiency rating” - have to be

within the range more than 97 %. 4. Real time tissue impedance monitoring technology

to deliver the selected power perfectly into a wide range of tissue types reducing thermal spread, RF interference and Neuro muscular stimulation and spark using feedback technology of sensing tissue types at a rate as high as 200 times in a second.








11. Numerical Error alarming system should be inbuilt. 12. With a single button on the machine, previous

power setting can be recalled. 13. Should be type CF Equipment (IEC 601 – 1 & IEC

601-2-2) defibrillator proof. 14. Unit should be US FDA and CE certified 15. Facilitating under water procedures


16. Unit should have “Spray” mode with Highest Crest Factor (in the range of 7-9) - (*Crest Factor as an indicator of a waveform's ability to coagulate bleeders without cutting effect.)




Input power source; Operating Range : 170-260 VAC Line Frequency : 50-60 Hz Minimum High Frequency Leakage Bipolar Less than 60 mA Monopolar Less than 150 mA OUTPUT CHARACTERISTICS


Highest Powers should be in the below ranges




OUTPUT WAVEFORMS :-


Monopolar Cutting Pure: 393 kHz sinusoid


Blend: 393 kHz bursts of sinusoid recurring of 27 Khz intervals. 50% duty cycle envelope

Monopolar Coagulation: Dessication:- Low 1: 240 +-40 Khz sinusoid recurring at 39 Khz. 8% duty cycle Low 2: 393 kHz sinusoid Low 3: 393 kHz sinusoid Fulguration:- High 1: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 57 Khz High 2: 470+-40KHz damped sinusoidal burstswith a repetition frequency of 30 Khz Spray:- 390 Khz damped sinusoidal bursts with a randomised repetition centered at 28 kHz. Frequency include 21 Khz ‹ f ‹ 35 KHz Output Is further modulated by a random 250 Hz envelope with a variable duty cycle Output power changes by ‹ 15% or 5 Watts, which ever is greater, as the line voltage varies from 90 – 135 volts and 186 – 264 volts (into a 300 ohm load)

6 Forced air warmer

Specifications for Forced air warmer 1. Forced air warmer for patient warming

with adjustable automatic temperature control between 32 - 44 degree Celsius, in steps of 4 degree Celsius; with outlet hose temperature monitoring system. The warmer unit should have the system of securely mounting on any IV pole or bed rail. Non-tipping mounting pole, with caster wheels, and wire basket to be provided with each warmer unit.


7 Forced-air

(convective)

patient-warming

system

Forced-air (convective) patient-warming system Technical Specifications:

a. Servo-controlled forced–air (convective) patient

warming system, using thermistors placed at hose end.

b. Hose end temperature range must be


increments (±1°C).

c. Relative Average Noise Level at 1000 Hz (front

and back) must be less than 45 dBA. d. Air Flow: 55 to 86 cubic feet/min.

e. Must have air filtration system with 0.2 micron

filters.

f. Operating voltage 230V, 50Hz AC.

g. The components and accessories of the convective patient warmer must conform to the

following Quality Standards: Product Safety (EN

60601-1, UL 2601-1); Convective Warming

Blanket Flammability (NFPA 702, 16 CFR

1610); EMC (EN 60601-1-2, FCC 47 CFR Part

15, Class B); Enclosure Protection (IEC 60529 IP Code: IPX1); Convective Warmers (ASTM

F2196-02); Drop Test Compliance (EN 60601-

1), and must have the US-FDA 510(k)

certification.

8 Portable USG

equipment for

vascular imaging and regional

anesthesia

Portable USG equipment for vascular imaging and

regional anesthesia Technical Specifications: a) Portable ultrasound machine with multi-frequency

broadband linear array, curved array and sector array

transducers used for accurate localization of peripheral

nerves, nerve plexuses, and epidural space during

regional anesthesia and also localization of peripheral and central veins and arteries for vascular access.

b) Must have US FDA 510(k) certification for the main


c) Must have the following Internationally approved

safety features & components:

Electromechanical safety standards: EN 60601-1:1997; EN 60601-1-1:2001; EN 60601-2-37:2001 +

Amendment A1:2005; CAN/CSA C22.2, No. 601.1-


M90; CEI/IEC 61157:1992; UL 60601-1

EMC Standards: EN 60601-1-2:2007; CISPR11:2004


9 Ambulatory PCA pump

Ambulatory PCA pump Technical Specifications:

a) Ambulatory microprocessor controlled

programmable patient controlled analgesia (PCA)

pump.


features & components: IEC/EN 60601-1, Class IIIb (according to Directive 93/42 EEC; EMC: IEC/EN

60601-1-2/ 60601-2-24.

c) Must have US FDA 510(k) certification for the main


10 Syringe infusion pump


a) Syringe infusion pump for continuous precise

delivery of intravenous drug infusions.



(according to Directive 93/42 EEC; EMC: IEC/EN 60601-1-2/ 60601-2-24.

11 Volumetric

(piston) infusion pump

Volumetric (piston) infusion pump Technical Specifications: a) Volumetric infusion pump (piston mechanism) for

continuous accurate fluid infusions, with ultrasonic,

adjustable air bubble sensor.

b) Must have inbuilt re-chargable Li-ion battery of at

least 1600 mA. c) Must have the following CE approved safety features

& components: ISO 9001:2000 AND ISO 13485:2003

(in accordance with the Medical Devices Directive

93/42/EEC; Design Standard: EN 60601-1 (safety)

and IEC 601-1-2 (EMC); Electrical Safety Stabdards:

EN 60601-1, IEC 60601-2-24, IEC 60601-1-4.

12 Single chamber

temporary cardiac

pacemaker (VVI,

VOO, AAI, and AOO

modes)

Single chamber temporary cardiac pacemaker (VVI,

VOO, AAI, and AOO modes) Technical Specifications:

a. Single chamber temporary cardiac pacemaker

with VVI, VOO, AAI, and AOO modes.


b. VVI (AAI) modes must be selectable with and

without acoustic signal.

c. Pacing Rate: 30 to 180 ppm

d. Atrial Overdrive Pacing (RAP): 2X (60 to 360 ppm); 4X (120 to 720 ppm)

e. Output Amplitude: 0.3 to 12 V ± 5%

f. Pulse Width: 0.75 ms ± 0.02 ms

g. Sensitivity: 1 to 20 mV, Asynchronous.

h. Refractory period: 250 ms

i. Battery Type: Should accept Standard 9 V, Alkaline or Lithium batteries. Should have

economically long battery lifetime of up to 30

days of operation with a single 9 V Alkaline

battery.

j. Weight must be less than 200g (with battery) k. Connector Compatibility: Must accept standard

connector pins with diameters ranging from 0.9

to 2.0 mm. Must accept all standard myocardial

heart wires and temporary pacing leads for


extension cable. l. Protective cover must be present to safeguard

against accidental changes to settings.

m. Audible warning tone for low battery, including

low battery indicator must be present.

n. Pacing run-away protection feature must be present.

o. Arm Strap must be supplied.

p. The equipment must conform to ISO and CE

stands for safety of operation and quality.

13 Pressure Infuser

Bag (Reusable): 1

L & 0.5 L sizes


a. Heavy duty pressure cuff specially designed for rapid infusion/pressurized infusion of fluids.

b. Suitable for pressure up to 400 mm of Hg.

c. Transparent material to enhance the visibility of

the fluid transfer/flow.

d. Easy to use, hook-and-loop fastener enables easy replacement of Infusion bag without

removal of Pressure Cuff from drip stand.

e. Instant venting through the three way stop cock

enables quick deflation of the cuff.

f. Clear & precise pressure gauge facilitates rapid &


reliable pressure control.

g. Squeeze bulb is supple, faster & easier to

operate for fast inflation.

h. Must conform to BIS / CE safety standards.

14 Percutaneous dilatation

tracheostomy kit

(incorporating the

Seldinger

technique and

reusable “Guidewire


Percutaneous dilatation tracheostomy kit (incorporating the Seldinger technique and reusable

“Guidewire Dilating Forceps”) Technical Specifications:

a) Percutaneous dilatation tracheostomy kit


“Guidewire Dilating Forceps”) with 7.0 mm ID cuffed tracheostomy tube.

b) Must have US-FDA and CE approved safety features

& components.

15 Multimodal ICU

Ventilator

Multimodal ICU Ventilator Technical Specifications:

a) Electric piston / turbine driven multimodal ICU ventilator (Spont-PS, AC-VCV, AC-PCV, SIMV-VCV,

SIMV-PSV, Adaptive-BiPAP, PEEP, invasive and non-

invasive ventilation modes for adult & pediatric

patients.

b) Must conform to the following Standards & Safety Requirements: ISO 10651-2, ISO 10651-3, ASTM

F1100-90, IEC 60601-1, IEC 60601-1-2, IEC 60601-2-

12, UL 94 HB or better.

16 Portable multi-

parameter patient

monitor

Portable multi-parameter patient monitor Technical Specifications:

a) Portable multi-parameter patient monitor with SpO2, ECG, NIBP, and Temperature, with wireless

LAN, and 3 h battery backup each mounted on

adjustable wall bracket.

b) Two (2) sets of standard accessories for ECG, SpO2

(adult, pediatric, neonate), NIBP cuff & hose (adult, pediatric, neonate), temperature probe,

c) Must have US-FDA and CE approved safety features

& components.

17 Patient-transfer

slide-board

Patient-transfer slide-board Technical Specifications:

a) Patient-transfer slide-board for Operation Theater, (approx. dimensions: 1500 mm x 550 mm, L x W) made

of lightweight & resilient radiolucent material of high

impact tolerance, good anti-static properties,


maintenance-free and easy to clean.


18 Adult half body

basic CPR (BLS)

training Manikin


a) Half-body CPR (BLS) Training Manikin with conforming to AHA (American Heart Association) 2015

guideline for CPR and ECC.

b) Must be able to support the performance of opening

the airway, artificial breathing and external cardiac

compression.

c) While performing artificial aspiration, observable chest rise must be present.

d) External chest compression: feedback for correct

compression dept (5-6 cm), correct compression site

with prompt correct buzzing sound.

e) Excessive compression, prompt alarming buzzing sound must be present.


g) Power: battery

19 Adult advanced

CPR (ACLS)

training Manikin

with monitor &

printer

Adult advanced CPR (ACLS) training Manikin with

monitor & printer: Technical Specifications:







c) Anatomical features must be clear, feel real, unified color, realistic shape, and aesthetic appearance.

d) Must simulate vital signs: the initial state, analog






emergency call, pulse check, check breathing, remove

foreign bodies of five operations.


h) Airway open manuvers. I) Modes of operations: CPR training, simulation,

assessment and actual assessment.

j) CPR display functions:Electronically monitored



and the number of errors. 220V power supply.




The printed transcript must cover covers the mode of operation, the sense of judgment, rescue breathing,

pulse check, check breathing, remove foreign bodies,




wrong reasons and frequency of blowing the wrong reasons, set the time, operating time and the

evaluation.



remote control CPR, stop, pupillary changes, with or without pulse, printers, and other functions. Can also

sense of judgment, emergency call, pulse check, check




material and should not distort while decontamination and disassembly.

20 Child advanced CPR (ACLS)

training Manikin

with monitor &

printer:

Child advanced CPR (ACLS) training Manikin with monitor & printer: Technical Specifications:














emergency call, pulse check, check breathing, remove foreign bodies of five operations.




assessment and actual assessment. j) CPR display functions:Electronically monitored




220V power supply.

k) Recording & Printer Features: Choice of operating simultaneously print operation and choice of operation


The printed transcript must cover covers the mode of

operation, the sense of judgment, rescue breathing,

pulse check, check breathing, remove foreign bodies, each cycle of operation the number of compressions




reasons, set the time, operating time and the

evaluation. RF remote control functions:


remote control CPR, stop, pupillary changes, with or

without pulse, printers, and other functions. Can also

sense of judgment, emergency call, pulse check, check breathing, remove foreign bodies to be recorded.




and disassembly.






Unit Cost For each

item

Expected life of the

equipment


next 5 consecutiv

e years

DEPARTMENT. OF OBST. & GYNAE. ESI-PGIMSR, JOKA 1 Cardiotocographi

c fetal monitor

with Maternal

Monitor

Specification of Cardiotocographic fetal monitor

with Maternal Monitor.

Standard size colour TFT screen monitor for display

of wave forms and digital

Automatic fetal movement detection facility in wave

forms.

Standard twin pregnancy monitoring system

Support for external thermal printer or ink jet printer

Built- in rechargeable battery and AC/DC power

supply.


24 hours monitoring, data storage and reload

capacity.


measurement ability


Fetal heart base line beat to beat variation and

acceleration, deceleration analysis capability.

Printing functions with paper for documentation.

Automatic monitoring mode and convenient operation

by manual/digital keys and rotary knob.

Light and auto-alarm ability complying with

international standard.


Maternal monitoring parameters may be present in

addition to fetal monitoring system.

ECG

SPO2

NIBP

Respiratory rate

Temperature

Other parameters


Delivery Bed:

Overall size: 1880L X 900w X600-800H mm.

Tubular Frame work mounted on 125 mm dia

castor two with breaks.

Three Section top made of MS pipe with fixed


cushioned mattress.

Height Adjustment preferably Hydraulic

height adjustment & back section

adjustment through electric actuator

system.

Trendlenburg/ Reverse Trendlenburg

Positions through pneumatic pump.

Leg end section can slide under the main

section. Wheel lock system must be

present.

Provided with a pair of upholstery lithonomy

position.


Detachable SS Tray.

3 MICROSCOPE MICROSCOPE SPECIFICATIONS


Illumination:


Focusing:



Observation Tube: Type: U-CBI30-2, Binocular

U-CTR30-2, Trinocular


Field Number: 20 20

Tube inclination:


30°

48mm-75mm

30°

48mm-75mm



Stage:





Condenser:







4 Portable

Ultrasound

Machine

Specifications of Portable Ultrasound Machine

1. The unit should be compact, light weight,

portable,sturdy and resistant to break & damage..

2. It should be suitable for vascular access (CVC

placement,PICC) Nerve blocks(Lower as well as

upper extremity),E-FAST examination, AAA

Exam, small parts, applications in adults and

paed. patients and also suitable for

echocardiography & interventions. Multiple

preloaded applications presets should be available

for the above.

3. The unit must have real time compound

imaging for improved contrast resolution &

eliminating ultrasound artifacts to achieve

optimum image quality.

4. The unit must have automatic gain adjustment

for B mode imaging

5. Scanning depth must be available up to 35 cm.

6. System should support transducer technologies

like convex, linear and phased array.

7. Imaging modes of real time 2D, color Doppler,


Pulsed wave Doppler, Continuous wave Doppler

and Power Doppler must be available in all

probes.

8. Simultaneous connectivity of at least 2 probes.

9. System must have fast start up to scanning in

less than 60 seconds as essential in critical and

emergency situation in ICU, emergency & OT.


11. DICOM ready system with facility to print

along with printer, store, ready to connect to

PACS

12. Flat LCD/TFT monitor of at least 10” with

flicker free image

13. Alphanumeric soft keys keyboard with easy

access scans controls, facility to sanitize the

system keyboard

14. to avoid cross contamination must be

available

15. Onboard storage of at least 10,000 images

,USB port for connectivity to computer

16. Should be able to operate both on AC and

battery. Battery pack should be self recharging

and should last at least for 2 hours when fully


charged.

17. Transducers to be provide as standard.

High frequency Linear transducer 6-12 MHz

with 60mm size for vascular access, small parts,

vascular, muscuskeltal

interscalene,Supraclavicular,Axillary,Musculocuta

neus,Popliteal,Saphenous.


Convex transducer 2-5 MHz for deep nerve

access specially Celiac,Sciatic


applications.

Broad band phased array transducer,1-5 MHz

for accessing the cardiac function & other related

application.

Needle guide must be supplied for Linear &

Convex probes along with 20 compatible needles

with the unit.

18. System should be supplied with trolley.


certification.

5 Digital Fetal

Doppler


Fetal doppler CE approved, with blue

blacklight for dark sight

Easy operation for everyone, over 10 years


quality satisfaction

Tm-100B Fetal Doppler CE Approved

Ultrasound frequency : 2.5+-0.25Mhz

Ultrasound output power : 10mW/cmDC

Power supply:9.6V rechargeable battery

Working environment temperature : 10-40

6 COLPOSCOPE

TECHNICAL SPECIFICATIONS COLPOSCOPE

1. Should be a basic model with binocular tubes

with inter papillary adjustment and vertical stand.

2. Should have a working range with fine focus of

minimum 40mm.

3. Should have a 12.5x or 13.5x or 15x eye piece.

4. Should have a standard objective of working

distance between 250 to 300mm.

5. The vertical stand should have at least 4

wheels and at least 2 of them should have

breaking facility.

6. The vertical joint should be rotatable and

should have vertical height adjustment.

7. The head should be tiltable and should have

positioning handle.

8. Should use a halogen light source with coaxial

illumination.


SL.

NO. NAME OF EQUIPMENT

& INSTRUMENT




Unit Cost For each

item


t





C-mount

Single Chip camera (Ex-stock)

Color TV (Ex-stock)


SLIT LAMP WITH MOTORIZED STAND Binocular Microscope Eye piece 10x16×25×40× Step magnification


8D compensation of ametropia Interpupilary adjustment : 50-80 mm Slit width: minimum 0-8 mm continuously adjustable Slit length: continuous from 8 mm to 1 mm minimum Slit angle : 0-180 degree continuous Slit Inclination: 5,10, 15,20 degree Filters: Blue, Red free , Grey & heat absorbing Bulb: Tungsten bulb Imaging facility

3 VISUAL FIELD

RECORDING

INSTRUMENT



Stimulus intensity 0.03 -10,000 Asb Stimulus Duration 0.1 – 9.98 secs Stimulus Wavelength Broadband visible light Maximum Bowl illumination 31.5 ASB GPA Software Testing features: Threshold Testing Library Central Field Testing Patterns: 30-2, 24-2, 10-2 Macula Peripheral Field Test Patterns: 60-4, Nasal Step Screening Test Library Central Field Patterns: C-40, C-64, C-76, C-80, C-Armaly Peripheral Field Test Patterns: P-60, DD-81, FF-120, FF-135, FF-246, FF-Armaly, Nasal Step Specialty Test Library Esterman monocular


Esterman binocular Superior 36 Superior 64 Stimulous / background color White on white User defined test storage User features: Fixation Monitoring Heiji Krakau blind spot monitor Video eye monitor Trial lens Holder Remote video eye monitoring capability Operator interface Help Menu Touch screen on CRT Motorized chin rest Printer Printex Thermal printer, table mounted Patient data input Name, Birth Date, ID, Trial Lens, VA, Pupil size IOP, C/D ratio, Diagnosis Code, Procedure Code, Comments

4 Flash Autoclave 1. Size: Minimum 20 Litre 2. Reservoir: 3 to 5 Litre 3. Tray: Minimum 3 in number 4. Air removal: vacuum pump 5. Total sterilization with vacuum dry: shouldn’t

take more than 30 min. 6. Exposure temperature: 121⁰ C/ 134⁰ C 7. Fully automatic, microprocessor controlled 8. Attached printer 9. European ‘B’ class certified


5 PHACOEMULSIFI

ER Based on peristaltic pump technology.

o Crystal phaco hand piece. o Multimode phaco (Continuous /

pulse / burst). o Occlusion mode phaco. o Cool microincision phaco. o In phaco mode.



o Continuous irrigation facility. o Bipolar diathermy with selectable

power. o High speed anterior segment

vitrectomy preferably with electric cutter.



SL. NO.





Unit Cost For each

item

Expected life of

the equipme

nt

CMC rates for

Post-Warranty next 5 consecutive years

DEPARTMENT OF ANATOMY REQUIREMENT OF LIST OF BONES: Technical Specifications: 1 Full skeleton 2 Vertebral column 3 Vertebral column with pelvis 4 Articulated pelvis 5 Full Skeleton Loose bones 6 Full Skull with mandible attached 7 Full Skull without mandible 8 Cut section of skull

SL. NO.





Unit Cost For each

item


t



REQUIREMENT OF ITEMS AND INSTRUMENTS Specifications 9 Tanks(portable)-STEEL(Accommodate at least 3

complete human bodies)

10 Student microscopes (Light)


11 Revolving stools(Steel)

12 Dissection tables(full size) 13 Dissection tables(small size)

14 Student lockers 15 Full model human male and female (detachable)- Vinyl

model

SL. NO.





Unit Cost For each

item

Expected life of

the equipme

nt

CMC rates for


Laminated Histology Charts and models and viscerae and Slides- provided separately MODELS/CHARTS FOR MUSEUM: Specifications 16 Full skeleton 17 Vertebral column

18 Vertebral column with pelvis 19 Articulated pelvis

20 Full Skeleton Loose bones

21 Cardiac muscle 22 Skeletal muscle

23 Smooth muscle 24 Compact bone

25 Spongy bone

26 Spleen 27 Lymph node

28 Tonsil


29 Thymus

30 Trachea 31 Lung

32 Submandibular gland 33 Sublingual gland

34 Parotid gland

35 Tongue 36 Esophagus

37 Stomach(body) 38 Stomach (pylorus)

39 Liver

40 Pancreas 41 Duodenum

42 Jejunum 43 Ileum

44 Large intestine 45 Cecum with APPENDIX

46 Gall bladder

47 Kidney 48 Ureter

49 URINARY BLADDER with prostate 50 TESTIS with vas deferens

51 Ovary

52 UTERUS with uterine tube 53 Vagina

54 Thyroid 55 Suprarenal gland

56 Pituitary gland 57 Skin


58 Mammary gland

59 Spinal cord 60 Cerebrum

61 Cerebellum 62 Eye

63 Placenta

64 Umbilical cord 65 Ear

66 Tongue 67 Zona pellucida

68 Morula

69 Blastocyst 70 Sperm

71 Ovum-matured 72 Ovum-immatured

73 Placenta 74 Placental barrier

75 Turner syndrome

76 Kleinfelter syndrome 77 Fallot’s tetralogy

78 Velamentous placenta 79 Battledore placenta

80 Trilaminar germ disc

81 Bilaminar germ disc 82 Developing notochord

83 Neural tube defects 84 Physiological hernia

85 Developing foregut 86 Developing midgut


87 Developing hndgut

88 Devleoping heart 89 Descent of testis

90 Developing kidney 91 Anatomy of pouch of douglas

92 Developing male reproductive system

93 Developing female reproductive system 94 Developing brain

95 Developing tongue 96 Developing eye

97 Developing lens

98 Devloping inner ear 99 Developing pinna

100 Middle ear 101 Semicircular canals

102 Long bone of child showing blood supply 103 Long bone of adult showing blood supplyand

ossification

104 Developing pituitary 105 Developing suprarenal

106 Neural crest cells and derivatives 107 Karyotyping

108 Development of diaphragm

109 Development of liver 110 Developmnt of spleen

111 Development of lungs 112 Bifurcaion of trachea

113 Larynx 114 Pharynx


115 Mandible 116 Right lung

117 Left lung 118 Heart

119 Heart with pericardium 120 Trachea with oesophagus

121 Trachea

122 Diaphragm 123 Liver

124 Kidney –right and left 125 Kidney (both) + urinary bladder

126 Spleen

127 Duodenum + pancreas + spleen 128 Stomach

129 Jejunum + ileum 130 Caecum with appendix

131 Rectum + anal canal 132 Small intestine

133 Large intestine

134 Male composite viscera 135 Female composite viscera

136 Urinary bladder with prostate gland 137 Urinary bladder

138 Testis right and left

139 Perineum male 140 Perineum female


141 Spinal cord

142 Meninges 143 Whole brain (both the hemispheres)

144 Cerebrum - half brain (one hemisphere) 145 Cerebellum

146 Cerebellum + brain stem

147 Brainstem 148 Cerebrum with brain stem HEAD & NECK(MUSEUM) 149 Sagittal section

(showing pns, pharynx, larynx & nasal cavity)

150 Eyeball 151 Eyeball sagittal section

152 Eyeball coronal section 153 Lens

154 Thyroid gland with isthmus

155 Composite viscera (tongue + larynx+ pharynx) 156 Axilla with arm 157 Cubital fossa

158 Palm 159 Wrist

160 Complete upper limb 161 Complete lower limb

162 Ts forearm

163 Ts arm 164 Femoral triangle with back of thigh

165 Leg with foot


166 Ts thigh

167 Ts leg 168 Cardiac muscle

169 Skeletal muscle

170 Smooth muscle 171 Ts- compact bone

172 Ts-spongy bone 173 Hyaline cartilage

174 Elastic cartilage.

175 Fibro cartilage 176 Artery

177 Vein 178 Spleen

179 Lymph node 180 Tonsil

181 Thymus

182 Trachea 183 Lung

184 Submandibular gland 185 Sublingual gland

186 Parotid gland

187 Tongue 188 Esophagus

189 Stomach(body) 190 Stomach (fundus)

191 Stomach (pylorus) 192 Liver

193 Pancreas


194 Duodenum

195 Jejunum 196 Ileum

197 Submandibular gland 198 Appendix

199 Gall bladder

200 Kidney 201 Ureter

202 Urinary bladder 203 Testis

204 Vas deferens

205 Prostate 206 Ovary

207 Uterine tube 208 Uterus

209 Vagina 210 Thyroid

211 Suprarenal gland

212 Pituitary gland 213 Skin ls (thick)

214 Skin (thin) 215 Mammary gland (active)

216 Mammary gland (inactive)

217 Spinal cord 218 Cerebrum

219 Cerebellum 220 Retina

221 Cornea 222 Placenta


223 Umbilical cord

224 Tongue 225 CADAVER


CADAVER STORAGE TANKS (Full SS) (Accommodate full human cadavers- at least 2 in each tank) Specification

1. OVER ALL SIZE: 72” (L) x 60” (W) x 24” (H)

WITH CASTER




HANDLE-6.






SL. NO.





Unit Cost For each

item

Expected life of the

equipment


next 5 consecutiv

e years

Department of Orthopedics 1

Prone position head rest (gel padded), dimensions: 280 x 240 X 140 mm adult size

2

Universal patient positioner (gel padded) large, 380 X 140 X 80 mm for shoulder, lateral torso and under knees support adult size

3

Dome shape flat bottom gel positoner, large 510 x 150 X 125 mm (semicircular cushion positioner) for chest, pelvis and leg support in prone position, adult size.




720p, 1080i, 1080p Selectable Multiple digital outputs (HD & SD Outputs) Light source communication Electronic zoom (in p-modes only) Autoclavable Camera Head Shockflex prism mounting Resolution 1920X1080p, Light up card edge receptable Progressive scanning, Aspect ratio 16:9 2 Camera Head Buttons for 4 Remote Fuctions

300W Xenon Light Source- 1 No

Automatically adjust to optimal light intensity Auto Bulb saver function Stand by Mode Homogenized Light distribution Light Guide Locking Mechanism OLED Window


24 '' or More Fully High Definition Monitor


Fully compatible with HD and Digital peripherals Sealed front panel in light-weight design with





Shaver Console 230 Volt Capacity to recognize the Hand piece, display of

speed The console should have option for connecting

Large Bone Drill & Saw Handpiece. Shaver Hand Piece-1 No

500- 12,000rpm, 500- 2,500 cpm, Single and Multi-turn Oscillate

Chuck for small drilling (for shoulder anchors etc) -1 No

Shaver Hand Piece should adapt the chuck


Cutters






Easy to setup and use. Flow not less than 2 lt / min. Pressure ranging 30 - 150 mmHg Weight should not more than 7 lbs System should be supplied with auclavable remote

control Inflow / out flow tubing set-10 Nos Arthroscopy Trolley(Indian)-1 No



5 C-ARM MACHINE (IMMAGE INTENSIFIER)




All operation on control panel k-board. Microprocessor based control with feather touch

panel. Generator unisearch IMD unit. Excellent fluoroscopy. Radiography output 25mA. On requirement Fluoroscopy: foot switch & on the control panel. Kvp variation of 40 -110kvp. 3 step mode selection, normal (LIH), PULSE and

LIVE control. Digital kvp metering display. Digital ma metering display. Foot switch.


Duel focus having 0.6mmand 1.8mm focus. Anode heat storage capacity 30kj. Anode cooling rate250 w/hr.


Type of Generator – khz hf X-Ray Tube - Fluro 0.6mm X 0.6mm Focal Spot - 1.5mm X 1.5mm Fluro / Radio KVP - 40-110kvp Fluro mA - 0-4 mA Fluro Timer - 5 Minute MAS - Up to 200 Power Requirement - 220V/50-60 hz & 3.5 kw Image Intensifier - 9 Inch

C-ARM FEATURE Rotation 360Degree Source to II Distance 90Cms Arc orbital Movements 110Degree Pann movements 0-25Degree Horizontal Travel 22 cms Vertical motorized movement 32cms Detachable Cassette Holder (Option) 10” x




6 Orthopaedic Electric Drill System Orthopaedic Electric Drill System:





Drill Chuck Adaptor with Jacob’s Stainless Steel Chuck (USA)

Pistol Grip Sagital Saw (Set of five blades) Flexible Reamers (2 pieces with reaming pieces

6mm – 13mm)

7 DIGITAL ELECTRONIC TOURNIQUET


Cuff pressure range: 10 to 450mmHg. Pressure regulation: +/- 10mmHG of set point. Online Setting: Increase and decrease in pressure

settings Timer: Timer range from 9hours to 59minutes. Internal least count: Timer 1minute/Internal

1/1000 second. Alarm & Display Indication:-

When set pressure is over When pressure goes 25mmHg above set




reaches 9V. Memory: Pressure set in earlier session is stored

and displayed, when machine is switched on again.


Backup: 3hours battery backup. (on full charge) Switch over: Automatic switch over from offline

to online (vise versa). Power: 230V(AC)/50Hz ± 10% (Voltage

fluctuations from 180-270). Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—washable &

easy fitting (Paediatric, small, medium, big & large).


8 SMALL FRAGEMENT INSTRUMENT SET


i. Drill Bit Q.C.End 2.5mm Dia—115mm Length—

2Pcs.,

ii. Drill Bit Q.C.End 3.2mm Dia—130mm Length—

2Pcs.,




v. Tap with T-Handle for 3.5mm Cortical Screw—

2Pcs.,

vi. Tap with T-Handle for 4.0mm Cancellous Screw—

2Pcs.,

vii. Drill & Tap Sleeve combined 2.5/3.5mm—1Pc.,

viii. Insert Drill Sleeve 2.5mm—1Pc.,

ix. Screw Driver Shaft Q.C.End ---2.5mm Tip—1Pc.,

x. Hexagonal Screw Driver 2.5mm tip—1Pc.,

xi. Small Depth Gauge—1Pc., Sharp Hook—1Pc.,

xii. Small Neutral & Loaded Drill Guide—1Pc.,

xiii. Spanner—11mm—1Pc.,

xiv. Small Plate Bender—pair—1Pair.,

xv. Plier Cum Wire Bender—1Pc.,

xvi. K-Wire Bender—1Pc.,

xviii) Reduction Forceps—Serartted---Ratchet


xix) Reduction Forceps—Pointed---Ratchet



xx) Self Centering Bone Holding Forceps—

190mm—1Pc.,

xxi) Hohmann Retractor 8mm wide, short narrow


xxii) Hohmann Retractor 15mm wide, 160mm

Length—2Pcs..,

xxiii) Periosteal Elevator ---Straight—160mm


xxiii) Instrument Box with two trays length 300mm—1Pc.



i. Drill Bit Q.C.End 3.2mm Dia—130mm Length—3

Pcs.,

ii. Drill Bit Q.C.End 4.5mm Dia—130mm Length—

1Pc.,



v. Tap with T-Handle for 4.5mm Cortical Screw—


2Pcs.,

vi. Tap with T-Handle for 6.5mm Cancellous Screw—

1Pc.,

vii. Insert Drill Sleeve 3.2mm—1Pc.,

viii. Drill & Tap Sleeve combined 3.2/4.5mm —1Pc.,

ix. Drill & Tap Sleeve combined 3.2/6.5mm—1Pc.,

x. Screw Driver Shaft Q.C.End ---3.5mm Tip—1Pc.,

xi. Large Hexagonal Screw Driver 3.5mm tip—1Pc.,

xii. Large Depth Gauge—1Pc.,

xiii. Sharp Hook—1Pc.,Spanner—11mm—1Pc.,

xiv. Large Neutral & Loaded Drill Guide—1Pc.,

xv. Pointed Drill Guide with 4.5mm Tap Sleeve &

3.2mm Drill Sleeve—1Pc.,

xvi. Large Plate Bender—pair—1Pair.,

xvii. Instrument Box with two trays length 300mm—

1Pc.


10 BASIC INSTRUMENT SET


i. Universal Open Hand Drill –2Pcs.,

ii. Wire Tightner Cum Wire Twister—1Pc.,

iii. Guide Wire Introducer with Four Pegs—1 Pc.,

iv. Plier Cum Wire Bender Cum Wire Cutter –9” –

1Pc.,

v. Wire Cutter Double Action Length 250mmm-

1Pc.,

vi. Self Centering Bone Holding Forceps 150mm—

1 Pair,

vii. Self Centering Bone Holding Forceps 240mm—

1 Pair,

viii. Self Centering Bone Holding Forceps 280mm—

1 Pair,

ix. Reduction Forceps –Serrated—Speed Lock—

170mm—2 Pair,

x. Reduction Forceps –Serrated—Speed Lock—

200mm—2 Pair,


xi. Reduction Forceps –Serrated—Speed Lock—

240mm—2 Pair,

xii. Pattela Bone Holding Forceps –Four Prongs—1

Pc.,

xiii. Lane Bone Holding Forcep with Ratchet

200mm—2 Pc.,

xiv. Lane Bone Holding Forcep with Ratchet

170mm—2 Pc.,

xv. Lane Bone Holding Forcep with Ratchet

200mm—2 Pc.,

xvi. Bone Cutting Forceps (Straight) Double


xvii. Bone Cutting Forceps (Straight) Double


xviii. Bone Cutting Forceps (Curved) Double


xix. Bone Cutting Forceps (Curved) Double


xxxiii) Chisel with Fibre Handles 5,10,20,30mm


--- 1 Pc. Each.

xxxiv) Osteotome with Fibre Handle Straight

5.10.14.16.20mm—1 Pc. Each.

xxxv) Osteotome with Fibre Handle Curved

5.10.14.16.20mm—1 Pc. Each

xxxvi) Bone Currette Double ended 4mmx6mm

–2Pcs.

xxxvii) Bone Currette Double ended 6mmx9mm

–2Pcs.

xxxviii) Langenback Retractor---Small—1Pc.

xxxix) Langenback Retractor---Large—1Pc.

xl) Bristow Retractor---1Pc.

xli) Self Retaining Retractor—Small—2 pcs.

xlii) Self Retaining Retractor—Medium—2 pcs.

xliii) Self Retaining Retractor—Large—1 pc.

xliv) Periosteal Elevator Curved—6,10,14,20---

1 Pc. Each

xlv) Bone Hammer 200,350,500gms--- 1 pc. Each




Clamp, clip-on self-holding, MR-safe


Aperture for rods 11 mm Schanz screw 5mm with lengths 125 – 200 mm All instruments must be enclosed in a Vario with


Wrench of diameter 11.0mm The instruments should have Socket Wrench of

diameter 11.0mm,cannulated The instruments should have Combination

Clamp, clip-on, self-holding, MR-safe The instruments should have Clamp, clip-on,

self-holding, MR-safe The instruments should have Universal Chuck

with T-Handle The instruments should have Adapter for

Seldrill™ Schanz Screw with diameter 5.0 mm The instruments should have Compressor, open The instruments should have Short Trocar with

diameter 3.5 mm The instruments should have Long Trocar with

diameter 3.5 mm The instruments should have Handle for Drill

Sleeve The instruments should have Short Drill Sleeve

5.0/3.5 The instruments should have Long Drill Sleeve

5.0/3.5 The instruments should have Short Threaded

Drill Sleeve 6.0/5.0 The instruments should have Long Threaded

Drill Sleeve 6.0/5.0 The instruments should have Connecting Rod

5.0 mm, length 150 mm, Stainless Steel


12 Medium External Fixator

Medium External Fixator Rod of dia 8 mm in


Clamp, clip-on self-holding, MR-safe Aperture for rods 8 mm Schanz screw 4mm & 5 mm with lengths 80 –

175 mm All instruments must be enclosed in a Vario with


Wrench with diameter 8.0 mm The instruments should have Wrench, hexagonal

with diameter 3.5 mm with T-Handle The instruments should have Combination

Clamp, medium, clip-on, self-holding, MR-safe The instruments should have Clamp, medium,

clip-on, self-holding, MR-safe The instruments should have Drill Sleeve 4.0/2.5 The instruments should have Adapter for

Seldrill™ Schanz Screw diameter 4.0 mm The instruments should have Adapter for

Seldrill™ Schanz Screw diameter 5.0 mm The instruments should have Universal Chuck,

small, with T-Handle The instruments should have Short Trocar with

diameter 3.5 mm The instruments should have Long Trocar with

diameter 3.5 mm







The instruments should have Threaded Drill Sleeve 4.0


13 Portable X-Ray Machine



RADIOGRAPHIC OUTPUT – mA Max mAs KV 50 250 45-55 40 200 60-75 30 150 80-85

KV SELECTOR – Select KV from 45 to 85 KV in 5 steps each

SUPPLY VOLTAGE COMPENSATOR – Adjust supply voltage from 180 v to 250 v automatically

LIGHT BEAM DIAPHRAGM Electronic DISPLAY – Digital display of mA ,


KVp & mAs OVERLOAD PROTECTOR IN BUILT mAs SELECTOR up to 250 mAs







Unit Cost For each

item

Expected life of

the equipme

nt

CMC rates for


PHYSIOTHERAPY DEPARTMENT 1 T.E.N.S

Therapy unit



Shortwave diathermy atleast 400 watt(micro processor controlled) 1)High performance solid state generator with digital display. 2)High performance multi jointed arm 3)Continuous & pulsed mode(allows thermal & non thermal treatment) 4)Patient safety switch.


5)Must have CE certified. 6)Safety standard class 1 7)Captive & inductive applicator. 8)Frequency 27.12 Mhz 9)Must have disc electrode with adjustable arm. 10)Pad electrodes for larger ,smaller & irregular surface area(small sinus electrode preferable) 11)Strap & other standard accessory preferable(knee jt,low back, upper back.)


3 Suspension frame







Parallel bar adult (height adjustable)

7 Static cycle



Complex exerciser unit should have suitable for shoulder elbow chest abdomen and lower limb exercise should be gradeable and adjustable for resistance foam padded table top on tubular frame the unit should be dimension 185-195 X 70-80 cm wide and the height should be 80 -85


cm complete unit consist of one table pan assembly and following attachement - ankle, hip, wrist,knee,abdominal and back exerciser it should include strap, harness,and over head pulley systems different iron weight plates starting from 0.25 kg and 1 kg total upto 30 kg pelvic rest 1 quadriceps rest 1 supination pronation wheel 1 wooden cabinet for storage



OCCUPATIONAL THERAPY 10 Fluidotherapy

Fluidotherapy it should be used for double extrimity simaltaneously operated in pulse or continious mode treatment time adustable adustable air speed machine should mounted with wheel or trolley safety standard class 1 digital display


should have dry heat media (cellulose particles) with the machine as accessories



Finger Goniometer

12 Goniometer Goniometer 13 Peg board Peg board


Wrist circumductor

15 Grip exerciser Grip exerciser

16 Finger exerciser Table

Finger exerciser Table


Finger dexterity board


Hand Gym kit board


19 Over head pulley

Over head pulley


Inclined sanding board

21 Horizontal sanding board

Horizontal sanding board

22 Shoulder wheel

Shoulder wheel

23 Balance Balance board


board


Foot placement ladder

25 Bolster set Bolster set

26 Wedge board set

Wedge board set

27 Quadriceps table

Quadriceps table

28 Stand in frame

Stand in frame

29 Trampoline Trampoline 30 ADL training

kit ADL training kit


Low rise exercise platform

32 Cp prone stander

Cp prone stander

33 Cp chair Cp chair 34 Wheel chair

for transfer training

Wheel chair for transfer training


Multiple gym exerciser

1 DIGITAL ELECTRON

Cuff pressure range: 10 to 450mmHg.


IC TOURNIQUET:-

Pressure regulation: +/- 10mmHG of set point.

Online Setting: Increase and decrease in pressure settings

Timer: Timer range from 9hours to 59minutes.

Internal least count: Timer 1minute/Internal 1/1000 second.

Alarm & Display Indication:- When set pressure is over When pressure goes 25mmHg above set



reaches 9V. Memory: Pressure set in earlier session

is stored and displayed, when machine is switched on again.






Stabilizer: Inbuilt. Cuffs: Different Sizes of five cuffs—

washable & easy fitting (Paediatric, small, medium, big & large).


2 Titanium Elastic Nails

instrument set





The implant should be available in titanium alloy (Ti-6AI-7Nb) that gives mechanical stability and elastic property.













The system should have an F-Tool The system should have an Awl that is curved and

has a sharp tip. The system should have an Extraction Pliers with

thread for TEN The system should have a Cutting Pliers for TEN The system should have a Hammer Guide The system should have an Inserter The system should have a SYNCASE Silicone Mat

170 x 460 mm The system should have a Lid for no. 675.420 The system should have a Tray, bottom, for


Instruments for 675.420 The system should have a Tray, top, for Implants

for no. 675.420 The system should have a SYNCASE Basic Tray,

height 145mm, neutral The system should have a Transport Case for

Syncase


3 Collinear Reduction

Clamp




The system should have a reduction attachment for reduction against LCP plates for both large and small fragment plates which can be mounted on the tip of feed rod.

The system should also have a reduction attachment for reduction against LCP/ LC - DCP plates and for reduction against the bone which can be mounted on the tip of feed rod.




4 PULSE LAVAGE SYSTEM


controlled. 2. Autoclavable & reusable tubes of medical

grade silicon. 3. Complete Sterility is maintained. 4. Easy loading of the tube in the machine. 5. Efficient peristaltic pump. 6. Water Resistance Display. 7. Foot control operate machine. 8. Pre Set features. 9. Four types of irrigation possible. 10. Inbuilt fuse and voltage control rectifier. 11. Power Supply 230 V AC 50 Hz ± 10% 12. Stainless Steel Body






Unit Cost For each item

Expected life of

the equipm

ent

CMC rates for

Post-Warranty next

5 consecu

tive years

Department of Pathology & Central Research Laboratory (for ESI PGIMSR, Manicktala) 1 CRYOSTAT CRYOSTAT

1. Freely standing cryostat with chamber

temperature down to -35°C. Actively cooled quick freeze shelf with optional 2 station Peltier unit for freezing down to -40°C with Specimen storage shelf to store up to 8 chucks.

2. Maintenance free microtome with section

thickness setting preferably from 1 to 100 µm. 3. Equipment must be suitable for sectioning of


4. Vertical Specimen Stroke length: 56 mm or above,

Horizontal Specimen feed: Approx. 25 mm

5. Provision must be available for Motorized (preferably at 600 μm/s &900 μm/s. – as rapid & slow respectively) coarse feed . Machine should have the Trimming facility via motorized coarse feed.


6. Blade holder system to hold both high profile &

low profile blade preferably simultaneously. Disposable Blade holder system must be provided with lateral displacement and integrated glass anti-roll guide.





11.Specimen retraction : 20 μm

12.Specimen orientation : X‐Y axis 8 deg and Z axis 360 deg

13. Instrument should be supplied with disposable blade holder for high and low profile blades, disposable blades (high profile and low profile), Specimen chucks, Brushes, Oil etc. 14. A 2 K.V.A online UPS also to be supplied with the instrument for at least 30 min standard backup.



SEMI-MOTORIZED ROTARY MICROTOME 1. Precision specimen orientation system with clear

zero reference point. 2. Force balancing system should be available for

effortless and uniform hand wheel rotation. 3. Section thickness setting from 0.5 to 100 μm, with

a provision of step-by-step increment. 4. Specimen feed of appx. 28 mm or above and

vertical stroke length of 70 mm. 5. Trimming section thickness setting range: 5 – 500

μm with a provision of step-by-step increment 6. Precise specimen orientation of 8° in horizontal

and vertical direction. 7. Coarse feed : motorized with variable speeds. 8. Knife holder base with lateral displacement




10.Slot cover to protect the interior of the instrument from sectioning debris. specimen size: 50 X 55 mm

11. Section waste tray must be provided. 12. Section thickness indication-visual display.

13. System should be equipped with both High profile & 14.Low profile disposable blade holder.


15.5 packet of each blade (High profile & Low profile) to be supplied with the instrument.

16.2 K.V.A UPS also to be supplied with the instrument for standard 30 min back‐up.

17.It should be CE/ISO certified .


3 FULLY

AUTOMATED SLIDE PREPARATION SYSTEM









4 Real-Time

PCR Real-Time PCR:

1. The Real time PCR System must have

International and/or National quality and safety certification, e.g. CE and/or UL/cUL and/or ISI certified and /or IVD certified.

2. The Real time PCR System should have an open platform system, and

musthave provisions for using third party kits and reagents for the molecular diagnosis of infectious diseases

3. Ready to use DNA and RNA master mixes should be available 4. The Real time PCR System must at least have the following In vitro

Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :





single run. 7. System should be able to run both standard mode PCR as also FAST mode

runs.

8. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine. Systems should be supplied with latest Pentium computer with color monitor and printer. It should have an interface to laboratory host computer. System software should be based on Windows XP and validated for IVD application.







14. Any additional step of centrifugation of tubes while performing the assay should NOT be there.

15. Should come with standard chemistries for gene expression, quantification,

mutation scanning, allelic discrimination, genotyping and methylation studies. System should be able to add a melt curve during a run if required. Instrument should be able to distinguish between 5,000-10,000 DNA genome equivalents (a two-fold difference in copy number) with confidence level up to 99.7%.






21. System should use close tube process to avoid any cross contamination. 22.Software: Unlimited user Software license with maximum feature should come absolutely free of cost for the life of the machine, with additional features of creation of customer genotyping, DNA quantification, gene expression, and pathogen detection assays, resulting in creating template files that can easily be saved and used to run assays that require set protocols.






Inner - 10.1 x 7.3 cm

Outer - 10.1 x 8.2 cm







9.Should come with the facility to run 4 gels together with companion running module.

10.Buffer volume : 700 ml for 2 gels and 1000 ml for 4 gels.

11.Same System Should be compatible with electroelution and western blotting in the same tank


12.Should come with consumables for at least 100 reactions.

13.POWER SUPPLY:-




Output Type: Constant voltage, Current or Power with

automatic crossover











• Spring mounted platinum coated titanium

anode and stainless steel cathode plate electrode to provide consistency and reproducibility in results, durability and extended life-span of the equipment.

• Maximum Gel Size should be 24 cm x 16 cm

• The system should be capable of transferring

multiple gels simultaneously.

• Current requirement should be upto 3000mA.

• Special agarose gel support frame for

performing southern blotting in the same system as an add-on facility would be preferred.


• Should come with consumables for atleast 100 runs

Power pack should have maximum output: 250V, 3.0A, 300W with the programmable facility for each parameters are as follows.


• Current Output range (programmable): 0.01

to 3.0 A, fully adjustable in 0.01 A increments

• Power Output range (programmable): 1-300

W, fully adjustable in 1 W increments

Output Type: Constant voltage, Current or Power with automatic crossover

Output terminals: 4 pair recessed banana jacks in

parallel





Add-on safety features like “No-load” detection,

rapid resistance change detection, ground leak detection; overload / short-

circuit detection; overvoltage protection; over-temperature protection are must.

The system should comply with EN61010 or

equivalent safety compliance.



7 Fast blotting

system


1. Fast blotting system for blotting four gels

simultaneously

2. Should have USB ports for filmware transfer 3. System should have a cooling fan




7. should have user notification with following

features


no load detection


end of run


8 ELECTROPORATOR

ELECTROPORATOR

1. Electroporator system with the capability to electroporate eukaryotic cells, prokaryotic cells (bacteria), yeasts and other microorganisms.





5. It should also have required software, pre-set optimized programmes and other accessories

9 MILLI Q WATER PURIFICATION SYSTEM

MILLI Q WATER PURIFICATION SYSTEM The complete water purification system should comprise of two stages as below: Stage I Stage 1 of the system must comprise of the following:- The tap water supply generally has a particulate reading of 1200 ppb. A suitable pre-filtration system for bringing the concentration from 1200 ppb to 100 ppb before use with the R.O. System should be provided. RO water system with a dispensing rate of 1 Liter per minute or better and large cartridges of over 20 inches each for a long life. The removal efficiency of the RO water system should be as follows:- Suspended solids- 100%, Bacteria - 99.5%, Viruses -


99.5%, Pyrogens - 99.5%, Organic, molecular weight >250 daltons - 97-99.5%, Monovalent inorganics - 94-96%, Divalent Inorganics - 96-98%, Trivalent Inorganics- 98-99%. The water quality should be suitable enough for general microbiology, general immunology and other activities such as glassware washing, deionization systems, glassware rinsing, buffer solution preparation, standard solution preparation etc. 2 extra prefilter, carbon filters ( total 3 each) to be included. Storage tank of around 15 -20 Liter at outlet of RO. System should include automatic flush valve, which extends RO membrane life: It should automatically initiate the purification process by flushing the RO membrane and tank for three minutes after each 12 hour period of inactivity. STAGE II For Ultra pure water Water quality must be good enough for Inorganic analysis: Ion chromatography, Inductively coupled plasma/mass spectroscopy, Atomic absorption, flame emission spectroscopy, trace metal analysis, Organic analysis such as Liquid chromatography, HPLC, Gas chromatography, Electrophoresis, Total organic carbon, Tissue culture, Clinical, General Microbiology, General Immunology, Recombinant DNA etc. Purification technique used / filters included to be as follows :- Carbon filtration, De-ionization - 2 no’s of polishing grade mixed bed, Organic adsorption cartridge, Ultrafiltration 0.1 micron, Ultraviolet reactor ( with dual wave length of


185 & 254 nm), hollow fiber filter (optional). Smart independent dispensing system (Dispensing Gun) for low volumes of ultra pure water. In line pressure regulator. Dispensing flow: 1.5 - 2 L /minute of Type I or 1 L/ m with hollow fiber filter Extra membranes to be included within the offer: Pre-filters and Carbon Filters for RO system :- 18 No.’s each R.O. : 2 No.’s Polishing Station / Ultrapure Station : 2 Sets each complete. All items necessary to operate equipments must be quoted.


10 LIQUID

NITROGEN VAPOUR STORAGE SYSTEM

LIQUID NITROGEN VAPOUR STORAGE SYSTEM




4. Minimal interior temperature gradient from bottom

of Chamber to below the lid

5. LN2 level indicator and safety relief valve should be present

a. Minimum 8000 of 2ml cryovial storage

capacity in racks and boxes (all racks and cryoboxes should also be provided with 1 set spare rack and its set of boxes)

6. LN2 system should be safely mounted on castors

for easy and safe mobility when when loaded

7. Automated real time display monitor below the lid

8. Automatic filling and control of LN2 level


9. Alarms for deviations from set values of level and temperatures


11. Program lock to prevent unauthorized intervention

12. Should have temperature log software for

monitoring the parameters continuously and its history

13. Liquid Nitrogen Cylinders (2 in number) to connect

to the storage vessel in order to automatically re-fill LN2 in the storage vessel as and when required. Capacity of Cylinders to be minimum 200 litres each, 22 PSI liquid delivery, equipped with LN2 level and pressure gauges and safety relief valve and mounted and restrained on castors for easy mobility.

14. Should be connected through Y connection: 1,

LN2 transfer hoses 03.

15. Should have inventory system for 2 ml cryovials

16. Racks should have locking system to prevent fall out of sample storage boxes

17. Should provide 2 sets of LN2 safe cryogloves

IQ/OQ/PQ validation documents should be provided


11 BIOSAFETY CABINET( Class II type B2)







6. Single piece stainless steel working tray without

welded joints to collect contamination or rust. 7. Robust dual wall cabinet construction with

negative pressure plenums around the work zone.

8. High performance, long life fan systems (HEPA/ULPA) with efficiency of air filter >99.9%.

9. Average airflow: Inflow – 100fpm or higher, Downflow – 60fpm or higher

10. Low noise level (<60dBA) and vibration free.


12. Digital display for Air flow, UV, etc with timer

function for UV light. 13. Front window/sash should be made of non-

reflecting, laminated safety glass.

14. Should be provided with electrical outlet, water/media and gas inlet.

15. Should have supporting stand with wheels, foot-rest and adjustable lab chair


12 CO2 INCUBATOR

CO2 INCUBATOR






6. 6.Temp. Uniformity : ± 0.3ºC or lesser

7. 7.Temp. Control : ± 0.1ºC or better using

microprocessor based accuracy technology with digital display

8. 8.Humidity : 95% ± 5% RH

9. 9.CO2 Range : 0-20% with accuracy of ±0.2% or

better

10. 10.CO2 Sensor : Infra-red based sensor

11. 11.No. of Shelves : 4 or more 12. 12.Other Feature : The system should have

International QC certification and be supplied with CO2 cylinder


13 SONICATOR

SONICATOR

1. Model should be probe based, compact, benchtop size, programmable and suitable for cell disruption and homogenization.


3. Piezoelectic based converter with required

converter cable.


5. Programmable timer with adjustable pulse sonication.


7. Supplied with standard probe (with replaceable

tip) along with additional probes for sample volume 0.2ml to 250ml.

8. 8.Digital display for monitoring parameters like

wattage, amplitude and energy.

9. 9.Jack stand, mounting system and sound proof box included.

10. 10.Inbuilt overload protection.

11. 11.Lead free and ROHS compliant.



SHAKER INCUBATOR (Refrigerated) 1. Model : Refrigerated table top shaker with

provision of stationary tray for incubation of petridish/ culture plates and clamp sets for flask of different sizes (100ml to 2 litre)

2. Body : Exterior : Made of steel 1. Interior : Made of stainless

steel

3. Temperature range : 10ºC - 75ºC or better


5. Shaking Amplitude : 25mm/ 30-350 rpm with ± 2% deviation


7. Other features : Accurate PID control for

temperature reliability.


9. Fluorescent lighting and UV for decontamination.


15 MIXER FOR MOLECULAR ANALYSIS AT VARIED TEMPERATU



RE Bench top model with small footprint with heating, cooling and mixing functions Facility for interchangeable block (with automatic block recognition feature) to accommodate plates and tubes ranging from 0.2ml to 50ml, Touch keypad with digital display of time, temperature and mixing speed, All three parameters to be freely programmable.


Temperature: Peltier based system, temperature

range from 150C below ambient to 1000C accuracy of ±0.50C at 20-450C, heating rate of at least 60C/minute and cooling rate of 2.50C/minute.

Heated lid to prevent condensation on lid and sides

of the tube.

To be supplied with block for 24x1.5ml Micro Centrifuge tube.

16 AUTOMATED NUCLEIC

ACID WORKSTATI

ON/NA PURIFICATIO

N SYSTEM

AUTOMATED NUCLEIC ACID WORKSTATION/NA PURIFICATION SYSTEM

• Should be a complete compact automated

nucleic acid isolation/purification workstation.

• Should be able to process 8 samples at a

time.




• Should able to process broad variety of

samples types including whole blood, blood cells, plasma, fresh or FFPE tissue, body fluids, cultured cells, bacteria, clinical sample. (Should free from cross-contamination &can be used for PCR/RT PCR reaction.)

• Run time should be 20-25 minute or less

according to batch size.

• Should be based on Magnetic bead technology for isolation of Nucleic acid. (DNA/RNA/TNA)

• There should not be use of any manual steps

& no other external device like vacuum pump or tubing/pumps are required.

• Should have preinstalled protocols & no

external program cards are allowed.

• Should have integrated HEPA filter, UV decontamination for less



• Should be provided with starter Nucleic acid

(DNA/RNA) purification/isolation kit.

• All international certificates including CE, CB & original software license should be provided.


10%50/60HZ+/-5%

17 VERTICAL -80°C FREEZER


1. Temperature range -50°C to -86°C and adjustable with a setting accuracy of +1°C





6. Full racks and boxes should be quoted 7. Must maintain -86C° even at ambient temperature of

32°C 8. Pull down time should be < 5 hrs 9. Microprocessor control for operation with integrated

audio visual temperature alarm function with digital monitoring display.


11. 11.Should have automatic reset function to protect the microprocessor controller from damage by electrical spikes

12. Battery back for display and alarm during power cut.


13. Should provide electronic chart recorder system with integrated alarm and auto-dialer facility. By this, user should be able to access data anytime from anywhere using internet, it should to warn the user about the freezer malfunction through phone and email notification. Historic data recording i.e graph should be viewed by hours, days or months with atleast three months data displayed at one time

14. 14.Heavy duty hermetically sealed two stage compressor ( 4x¾HP) to maintain inner temperature below -86°C

15. 15.Refrigerant should be CFC free 16. 16.Should have space saving foot print (WxD): 80 x

86cm 17. 17.Should have diagnostic software for fault

condition. 18. 18.Should provide C02 back up system with all

necessary set ups i.e CO2 cylinder etc

19. 19.Should have heated air vent to ease the door open during vacuum formation within the chamber

20. 20.Power consumption should be < 8.5kWh/day 21. 21.One fan circulation to lower the noise and power

consumption 22. 22.Insulation should be of 130mm thick with

combination vacuum insulation panel and polyurethane foam. Vacuum insulation should have metal coated polymer film barrier seal to maintain vacuum strongly.

23. 23.Should have lockable castors for free and easy mobility

24. 24.To be operational on 220 to 240 Volts at 50 Hz. Single phase

25. 25.Should have CE and UL certification 26. 26.Should be supplied with compatible voltage

stabilizer


18 Binocular LED Microscope



2. Microscope should have right hand stage Stand with 4 positions Nosepiece, Universal Power Supply, Mechanical stage with non-extending rack and slide holder, Long life LED Illumination with Auto off facility, built in handle and cord wrap. Dust cover, Manual.



5. FOV should be 20mm 6. IPD should range from 52mm – 75mm 7. Abbe Condenser 0.9A dry with relevant sliders. 8. Should have integrated vertical handle for easy

carrying & easy lifting with integrated cord wrap to eliminate damage to microscope components.







19 PLATELET

FUNCTION

ANALYSER




3. Detect vWD 4. Detect platelet P2Y12 receptor blockades in

patient undergoing therapy with P2Y12 receptor antagonist

5. Start up reagent and cartridge for 100 tests 6.Test system Principle: High-shear force dynamic flow system • Measuring channel: Single measuring channel • Incubation category: Two incubation wells • Incubation temperature: 37.9 °C ± 1.0 °C • Incubation warm-up time: < 15 minutes (room to operating temperature) • Trigger solution: Illuminated trigger solution viewing area 7. Sample Handling • Type of sample: Citrated whole blood • Sample mechanism: Manual pipette dispensing (800 μL) • Barcode identification: external barcode reader for sample identification 8. Reagent Handling • Type: Single disposable self-contained test cartridges • Reagent recognition: Positive optical coding reagent cartridge identification • Additional reagent: Trigger solution


9. Throughput • Single test: P2Y, Col/EPI, or Col/ADP: 6 tests/hour • Duplicate test: Col/EPI or Col/ADP: 10 tests/hour 10.Software • Interface: Color LCD touchscreen • Host connection: Unidirectional, external RS-232 DB-9 port or ethernet network • Stored patient results, control results, and maintenance events: Last 1,000 results • USB port: Software updates, printer, barcode scanner,and result export • Quality control: Built in • Onboard help • Instrumentation status: Clear status messages (red, yellow, and green) 11. Power Supply • Operating voltage: 100 – 240 VAC • Main frequency: 50 – 60 Hz • Current (maximum): 1.38 A @ 90 VAC 12.Environmental Conditions • Operating temperature: 18 °C – 29 °C • Non-operating storage: -29 °C – 50 °C • Relative humidity: 20 – 90 % • Operating humidity: 20 – 90 % RH (non-condensing) • Non-operating storage humidity: 0 – 95 % RH (non-condensing) • Degree of protection: according to IEC 60529 • Heat emission: 94 kcal/h (375 BTU/h) 13. Online UPS with 30 minutes backup

20 BLOCK

CABINET

BLOCK CABINET


1. Made of CRC sheet duly powder coated.

2. Should have index card holder and handle

for each drawer.

3. Should be provided with lock and key

4. Capacity 20000 blocks

21 SLIDE

CABINET

SLIDE CABINET

1. For placing slides in horizontal manner

2. For safe and easy handling of 75 × 25 mm

slides.

3. Made of mild steel sheet.

4. Well designed for performance and

durability.

5. Powder coated paint outer finish with

smoothly working doors fitted with handle,

lock and key.

6. The anodized aluminium slide strays for

holding 75 × 25 mm slides, have been

arranged separately so as not to disturb

other compartments while taking out or

putting in the slides.

7. The size of the tray approx 350 × 210 × 35

mm and nicely fitted with uniformly slotted

aluminium carrier each holding slides in


8. Fitted with index card holder.

9. Capacity 20000 slides.

22 UV Sterilization

cabinet





contamination 4. Protects the user from Biohazard samples 5. Four powerful, timer controlled UV tubes,

combined with optimal reflectors, provide

efficient irradiation of the complete work surface

6. Doors equipped with safety cutouts 7. To be provided with safety trays and easy

to clean tray liners 8. Safety interlocks on the cabinet doors

prevents the user from any exposure to the

UV light 9. To be provided with required accessories

such as height adjustable stool, etc

23 Micro Centrifuge for

0.2ml PCR tubes



24 Micro Centrifuge for 1.5 ml/0.5ml PCR Tubes


1. Quiet and Reliable

2. Small foot print 3. Built in power supply 4. Digital display of time and speed




25 Vertical

Laminar

Air Flow

Cabinet

Vertical Laminar Air Flow

Cabinet 1. Inner work surface width a minimum of 2

feet for easy handling of samples 2. Laminar Air Flow Cabinet should be tested

for cross-contamination and product

protection using microbiological test methods specified in EN12469.

3. Sentinel Microprocessor-Based Control &

Alarm System 4. ISO Class 4 Air Cleanliness 5. Front Sliding sash

6. Cabinet Construction a. Main Body : 1.2 mm / 0.05”/ 18

gauge electro-galvanised steel with white oven-baked epoxy powder-coated finish

b. Work Zone : 1.2 mm (0.05") 18 gauge Stainless Steel, grade 304, 4B

finish. Single piece stainless steel work surface with a curved front edge for maximum operator comfort

12.Side Walls : Colourless and Transparent UV absorbing tempered glass to enhance

visibility inside the work area. 7)Raised Front edge.

8)Temperature compensated Air velocity sensor.

9)HEPA Filter Typical efficiency - 99.99 % for particles size at 0.3 microns.

10)Additional disposable pre-filter with 80 %

arrestance to trap large particles in the inflow air prior to reaching the main filter, protecting against damage and prolonging filter life.

11)External surfaces should be powder coated


with Isocide Anti-microbial coating to eliminate

99.9 % of surface bacteria within 24 hours of exposure.

12)Permanently lubricated, high performance, energy efficient, centrifugal motor/fans. less

electrical energy consumption. Completely integrated assembly to optimize motor cooling. All

rotating parts should be balanced for smooth, quiet and vibration-free operation.

13)Sound Emission : < 61 dBA as per IEST-RP-CC002.2

14)Electrical 220-240V, AC.

15)To be provided with additional accessories- IV. Support stand with adjustable height.

V. UV lamp for decontamination. VI. Ergonomic height adjustable Lab chair.


SL.


& INSTRUMENT





Expected life of

the equipm

ent



26 Class II Biological

Safety Cabinet Type A2

Class II Biological Safety Cabinet Type A2

1. Size atleast 1.2 X 0.6 X 0.6 meters

2. EN 12469 Certified 3. Recirculation 70% & Exhaust 30%

4. Average Air Flow Velocity: (3) Inflow : 0.45 m/s (90 fpm) at

initial setpoint, audible/visual

alarm should activate at 0.40 m/s (80 fpm)

(4) Downflow : 0.30 m/s (60 fpm) at initial setpoint with uniformity of

better than +/- 20% 5. Noise Level < 62 dBA according to

EN 12469

6. Cabinet Construction: (2) Main Body: 1.2 mm (0.06") 16

gauge electrogalvanized steel with white oven-baked epoxy antimicrobial powder coated finish

Work Zone: 1.5 mm (0.06") 16 gauge stainless steel, type 304,

with 4B finish Interior work area formed from a single piece of stainless steel with large radius

corners to simplify cleaning. 7. ULPA filters with efficiency greater

than 99.999 % for superior operator


and product protection

8. Standard Compliance : 1. Filter performance - IEST-RP-CC034.1,

IEST-RP-CC007.1, IEST-RP

2. Electrical Safety - IEC 61010-1 / EN 61010-1 / UL 3101-1 / hsirig, CSA C22.2

No. 1010.1-92 3. ISO Class 3 air cleanliness in work zone.

9. Negative pressure plenum should surround contaminated positive pressure plenum for quiet,

uniform airflow 10. Microprocessor Control with temperature compensated airflow sensor for supervising all

cabinet functions.

11. Antimicrobial coating on all painted surfaces to protect against surface contamination.

12. Advanced separatorless mini-pleated ULPA

filters tested to > 99.999% efficiency for 0.1 - 0.3 micron particulates.

13. Digital read-out with alpha-numeric display

should indicate all input, status and alarm functions.

14.The cabinet work zone should not have

welded joints to collect contaminants or rust.


16. A recessed central area and stainless steel


drain pan channels for preventing liquids from

entering the lower filtration and blower systems

17.Angled viewing window and narrow profile front grille to improve reach into the work area

18.Front armrest raised above the work zone to

improve comfort and to ensure no airflow blockage

19.Frameless, shatterproof sash for easier cleaning, and for larger, unobstructed viewing

area

20.The Biological Safety Cabinet Should be individually tested, documented by serial number

and validated with the following test methods. 21.Inflow / downflow velocity PAO Aerosol

challenge for filter integrity Light, noise and vibration Airflow pattern visualization Electrical safety to IEC61010-1

22.Electrical 220-240V, AC, 23.To be provided with additional accessories-

(a) UV Lamp (b) Ergonomic height adjustable chair.

27 Vortex

Mixer

Vortex Mixer 1. 1200 rpm 2. 220/230 V AC

3. Size 12” × 12”

28 Water

Bath

Water Bath 1. Double walled made of stainless steel.

2. Outer wall powder coated 3. Space between double walls is filled with

glass wool for insulation


4. Provided with drain plug for easy emptying

5. Reliable immersion heating elements 6. Thermostat controlled temperature from

ambient to 100 degree Celsius +/- 0.5

7. Digital Display of temperature with appropriate regulators, on /off switch,

alarm 8. Suitable to operate on 220 V AC supply 9. To be provided with accessories

1. Stirrer with S/S rods and blades

2. Test tube racks of S/S

29 Single channel micropipette

Single channel micropipette 1. Single channel variable volume 0.1µl-

2/2.5/5 µl

2. Systematic error should not be more than 3% at minimum volume and 1% at maximum

volume 3. Minimum resolution of volume 0.001µl 4. Easy digital volume setting

5. Enhanced UV resistance 6. Precise reproducibility for long hours

7. Tip ejection automatic 8. User technical manual to be supplied in

English

9. Certificate of calibration and inspection should be provided

10. Spare parts and accessories to be provided with pipettes.

11. Should provide compatible stands


SL.


& INSTRUMENT




Unit Cost For each

item

Expected life of

the equipm

ent

CMC rates for

Post-Warranty next

5 consecu

tive years

Department of Pathology(For ESIC HOSPITAL, JOKA & Manicktala)
















11. The system should be able to recognize Slide Specific Barcode label which would provide automatic programming, patient and case


identification.



14.The system should have compatible computer and software of latest technology available during installation. The software should be upgradable.

2 Fully Automated

Urine Analyzer

Fully Automated Urine Analyzer 1. Random access system for physical, chemical and

sediment analysis on urine specimens.

2. Multiparameter Chemistry analysis of at least 10


a. Specific gravity

b. pH

c. Albumin

d. Glucose

e. Ketone Bodies

f. Bilirubin

g. Urobilinogen


h. Blood/Hemoglobin

i. Micro albumin

j. Nitrite

3. Analysis of standard urinary sediments consisting of

different cells, casts and crystals.

4. Throughput-60/hour including sediment analysis in

random access mode.

5. Microprocessor based photometric analysis of

chemical parameters and flat flow cell technology

with high speed and 800-1000 frame imaging for

sediment analysis.

6. Interconnected parallel pc with appropriate soft

ware for –



Image display of formed elements

Storage of data of results and others atleast

10,000 in number

7. Bar coded facility for reagent and sample

identification


8. Laser colored printing of results and data

9. Power back up with UPS for at least 2 hours

10. Accessories

a. Sample rack to hold 50 samples-05

b. Reagents for start up- 1000 analysis

c. International certification for medical equipments

3 Bone decalcifier

automated,

electrolytic

decalfication system



1. Automated system for processing of Gynaecological and non- gynaecological cytology samples for liquid based cytology along with automated stainer.

2. Should have ability to make single slides which is uniform and reproducible.

3. Should have a controlled membrane transfer technology to make a thin smear with uniform distribution of cells.



5. Should have an automated slide stainer with an

ability to run at least 30 slides in half an hour. 6. UPS with two hour power backup. 7. CE certificate

Accessories:

1. Microscopic slides- 2 boxes of 100 slides 2. Filter- 2 box to process 200 samples 3. Solution -2 box to process 200 samples 4. Preservative solution -2 box to process 200

samples 5. Staining kit for staining at least 200 smears 6. All the standard accessories to be provided with

the equipment.

5 Patient and data

management

system


1. Fast processing system with high end security having

several different modules for patient and data

management of the laboratories.

2. Should have the ability to generate unique

identification number of the patient starting from

lab registration, sample collection, testing and

report delivery with generation of bar code id, and

stickers.

3. An integrated token system for the patients while

waiting for sample collection.

4. Computer with bar code reader in registration,

sample collection, different labs ( clinical pathology,

Cytopathology, hematology, histopathology,


different sections of biochemistry and microbiology)

5. Easy to operate

6. Ability to store data of at least 5000 patients per

day.

7. Data to be accessible on mobile, laptop, tablets etc

and the ability to deliver SMS to target

people(patients as well as doctors).

8. Result modification before final report delivery.

9. Can be integrated with other automated lab

equipments.

10. New features can be upgraded time to time as per

requirements

11. Accessories for the system to be supplied along with

the software.


Automated Cover Slipper 1. Fully automated unit with a through

put of 400 slides/hr. at least


sizes and thickness of cover slip as

written below.

3. Size – 40mm, 50mm, 55mm, 60mm.

4. Thickness – 0.13 – 0.17mm.


solvent like xylene, d-limonene and


aliphatic hydrocarban –based

substitute and mounting medium like

DPX etc.

6. Should be able to handle both histology

and cytology sample simultaneously.

7. Should have an in-built filter to remove

any vapors or fumes.

8. Easy to operate with different program

setting and a touch screen panel.

9. Should be able to accept slides from

different automated slide stains.

10.UPS for 1hours back up.

11.International CE certification for

medical equipment.

Accessories – 1. Cover slips of different sizes &

thickness – 500 each.

2. Dust cover.

3. Standard accessories with the main

equipment.




materials

Cardio-Vascular Mitral stenosis Atheroma aorta Lt. ventricular hypertrophy Fibrinous pericarditis Dilated Cardiomyopathy Infective endocarditis

Respiratory Lobar pneumonia Bronchiectasis Emphysema Pulmonary Tuberculosis fibrocaseous & miliary Bronchogenic carcinoma Silicosis Bysinosis

Gastro-Intestinal Peptic ulcer Typhoid ulcer of S.I.


Vascular Syphilitic Aortits




Female Breast Carcinoma breast



Lymph Node TB Lymph Node Hodgkins LN



2. Vacuum breaker-protected water supply 3. Ventilation system with Two

options(outside source or inbuilt) 4. Large sink with mixing faucet 5. Ample lighting 6. Magnetic instrument holder 7. Washable dissecting board 8. Must have Service centre in Kolkata


Grossing board to accommodate a wide range of

tissue types. Should have two adjustable wells to ensure grossing to an exact thickness

Integrated rulers on the standard and large boards

to enable gross measurement of specimens. Trimming knives and scalpel blades to provide the

sharp cuts necessary for exact grossing techniques.


2-4 grossing forks designed to hold specimens including fragile tissue and any specimens with layers, while maintaining perfect specimen form


and integrity. Dust cover Dictating unit with microphone UPS 1.0 KVA Integrated imaging system Infrared control.

9 GROSSING STATION

Item: : Histopathological Grossing table / Grossing Station elevated floor model with Electrical and mechanical controls with UPS 1.0 KVA . Details: 1. Cutting board with black viewing surface, to accommodate a wide range of tissue types. Should have two adjustable wells to ensure grossing to an exact thickness. 2. Connecting tubes for water supply and drainage.

3. Sprinkler system for easy cleaning of the working

area.



6. Electronic scale upto 2000g at least.

7. Integrated S.S. rulers in cm / mm scale on the standard and large boards. 8. Light tubes and adjustable spot lights.

9. Filtration system to suck-off polluted air, with easily Replaceable filter, alum oxide. 10. Magnifying Glass with long handle (flexible).

11. Separate metal table for grossing with drawers.


13. Dictating Unit with microphone and controlling unit & foot switch


Essential Accessories must be supplied with the

main consignment






Nomenclature: Laboratory Microwave Processor System for Enzyme Retrieval Table- top Model 20 to 30 Litre capacity. Description: Table-top model, capacity 20-30 Litre, convection mode, S.S. body, preferably ceramic enamel inner wall, programmable digital temperature controller and display within a range of 40°C to 108°C, built-in temperature probe, automatically controlled programmable timer setting and digital display, wattage level 800 - 1000 watt : MW leakage proof design, overheating prevented design, audible alarm with user adjustable time delays, throughput of 80 – 100 slides per run, dewaxing, rehydration and antigen retrieval in approximately 30 minutes,IEC/CE/ISO Certified model.


Essential Accessories : 9. Compatible Plastic Rack for

holding slides: 5 (five) numbers 10. MW compatible specimen

containers assorted sizes: 5 (five) numbers

11. U.P.S. 1 KVA: 1 (one)Number 12. Operator’s Guide

11 pH METER DIGITAL

Nomenclature : pH Meter digital pen type. ( Minor variation of quoted specification may be accepted within a short range as available in the market nearest to the requirement of the consignor) Principle: Microprocessor controlled pen type equipment.



Resolution: 0.01 pH; 1 mV. Accuracy: ±0.01 pH ± 1 digit; ± mV ± 1 digit Operating temperature: 10˚C to 50˚C.


Operating Panel & Display: Panel for different functions with digital LED Display.

12 AUTOMATIC PRECISION

MICROBALANCE

Nomenclature: Electronic precision weighing balance 150g (approx) with display and UPS. (Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Description : Electronic precision microbalance with chemical and moisture proof stainless steel top-fitted weighing surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Power cord Indian type. Capacity: Maximum capacity : Approx. 150 g Readability : 0.01 g Repeatability : 0.01 g Linearity : ± 0.02 g ( at ambient temperature)


Essential Accessories must be supplied with the main consignment & committed in the bid 1. Calibration weight. 2. Protective cover.

13 Hot plates electric with digital temperature controller, temperature range upto 300°C, heat-proof powder coated cast iron top, spiral heaters, thermostatic heat control


______________________





17 Staining Racks S.S. horizontal with handle cradle type for 10 slides/ 20 slides




19 Laboratory Counter Laboratory Counter Clay-Adams 9 keys spring loaded, including eight individual counting keys and one totalizer heavy duty metallic body, good visibility of rotating digits, digit range 0 to 100 for each, audible alarm at 100 count in total,. Options for counting of cell, simple computation and percentage counting. Individual key counting limit of 999 cells. Bilateral sturdy resetting knobs.





22 Drill for boring glass

______________

23 Blow piece with bellow for bending glass

_____________

24 Sternal Puncture

Needle Sternal Puncture Needle (Klima and Salah type)Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size:15G, 1 7/8inches Adult size

25 Sternal Puncture

Needle Sternal Puncture Needle(Klima and Salah type) Heavy duty stainless steel made, with total assembly comprising of aspiration needle with adjustable guard and trocar, Size: 18G, 1 ½ inches Child size

26 Liver Biopsy _____________


Needle Trucut needle s.s.

27 Box weight analytical

______________


_____________


_____________












Forceps dissecting plain serrated jaws broad tip


7.5.inches


Forceps Iris

Forceps Sinus

Forceps Specimen





Mallet S.S.

Needle Teasing S.S.


Probe Straight S.S.











Speculum Nasal

Sponge Holder




31 Dark Room Lamp __________________

32 Deep Pan S.S. __________________


__________________

34 Sampling scoop S.S.

__________________


__________________


__________________



__________________


__________________


__________________


__________________


__________________

42 Leather Strop superfine quality double sided

__________________


__________________

44 Post-mortem set



Autopsy knife

__________________


blade 325mm with handle

Calipers

Curettes

Cuscoe’s speculum

Dilators

Enterotomes and viscerotomes







Forceps Iris


Forceps Sinus

Forceps Specimen

Irrigation device


Knife Brain

Knife Cartilage

Knife Professional

Knife Resection


Nasal speculum

Needle holders

Retractors

Rib shears



Scissors Dissecting

Scissors Fine


Pointed Curved 5.5 inches


Scissors Iris




Scissors Metzenbaum




Sternal Saw


Stryker Skull Saw

Surgical staplerwith reloadable staple cartridges

Tenaculum

Towel forceps

Tray 12 x 12 inches

Tray 12 x 18 inches

Trocars

45 Bone marrow Biopsy Needle Jamshidi Type Heavy duty stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Adult type, 11G, Stainless steel instrument tray with lid 8 inches x 8 inches

__________________

46 Bone marrow Biopsy Needle Jamshidi Type Heavy duty

__________________


stainless steel made two piece, with light weight T-Handle streamlined and ergonomic design, trocar with tapered stylet point and triple crowned cannula tip.Pediatric type, 13G, Stainless steel instrument tray with lid 8 inches x 8 inches


__________________


__________________

49 Class II Biosafety

Laminar

Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45


Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system

50 Homogenizer with

two probes


Small dispersing instrument for volumes from 0.1-100 ml Quick-connect coupling for probes Stainless steel probes Option of using with plastic disposable dispersing elements • High performance drive Probe for volume Range (H20): 0.1 to 10 mL, 1-100 ml Speed Range: 8000 to 30,000rpm Maximum Viscosity (cps): 20000 Preferably built-speed control Use Options: Handheld or stand-mounted Motor: 125w Noise Level: 65dB or less Overload Protection: Yes Should be supplied with all the accessories like Stand, boss clamp, clamp etc


SL.


& INSTRUMENT




Unit Cost For each

item

Expected life of

the equipm

ent

CMC rates for

Post-Warranty next

5 consecu

tive years

CLINICAL LABORATORY (For ESI-PGIMSR, JOKA)










3. Glass Landau’s tubes, class A glass with bulb and precision etched and printed marks at 0 to 50 mm : 5 (Five) tubes

4. Filling pipette with long stem and rubber teat : 5(Five) No.s


53 Urinometer precision glass with mercury bulb and graduated stem with temperature mark

___________________


_________________


_________________

56 Crucible Gooch with adaptor

_________________


Electronic precision balance with chemical and moisture proof stainless steel top-fitted weighing

_________________


surface; LCD display panel and control panel; interfaced peripheral printer with key-panel; functional for piece counting, % weighing and dynamic weighing; provision of display of weight in mg / gm must be there; easy calibration, cleaning and maintenance; to be supplied with full documentation of precision & accuracy certificate. Maximum capacity: Approx. 12000g Readability : 0.1g Repeatability : 0.1g Linearity : ± 0.3g (at ambient temperature) Essential Accessories 1. UPS of capacity 0.5 KVA. 2. Power cord Indian type.


3. Extension cable 5m. 4. Calibration weight. 5. Protective cover.








Spectrophotometer




c. 2 point end linear & non linear.















Calibration: Automatic against standard / calibration.


b. Levey - Jennings diagram.





Display:

a. Graphic LCD.





Key board:

a. Chemical and moisture prevented single touch alphanumeric membrane key panel.


Printer:









Peripheral interfacing: a. Parallel ports for external printer , keyboard and PC. Software PC Compatible.






____________________

62 VOLUME DISPENSER




SL. NO.







t





ULTRA LOW TEMPERATURE LAB DEEP FREEZER Nomenclature : Laboratory deep freezer floor model electrically operated, capacity of approx 550 L- 600 L ( Variation of capacity may be accepted within a short range available in the market nearest to the requirement of the consignor) Principle: Electrically operated vertical floor model with ultra cooling device, stainless steel interior, 4-5 replaceable storage compartment with stainless steel racks, temperature selector and Temperature Controller, eye- level display and temperature recorder, gasket sealing system to avoid ice formation, calibration mode should be built-in with the system and lock system in door.


Temp. range: Selectable range from -400 C to - 80˚C.

Operating Panel & Display: Button/ switch panel for different functions and programmes,viz, start, stop, temperature control, temperature and time setting with LED Display. Battery backup for alarm & display. Display of set and actual running values. Alarm: Acoustic Signal for over or under-temperature, improper locking of door(optional), or error. Essential Accessories must be supplied with the main consignment & committed in the bid 1. Thermometer. 2. UPS 2.0 KVA. 3. Power cord Indian type. 4. Storage boxes.


2 Automated Immunohem

atology detection system

Specification Automated Immunohematology detection

system by Gel Card Technology. 1. Semi-automated immunohematology analyzer

incorporated with centrifugation, reading and interpretation abilities for the tests performs by the column agglutination technology for transfusion related cross matching on anti human globulin and enzyme phase (to detect both IgG & IgM antibodies), blood grouping, partial Rh-D typing, antibody screening &identification in a single step.


i. ABO Blood grouping with partial D screening.

ii. Weak anti D test with ICT method.

iii. Antibody screening and identification.

iv. Single antigen test cards and antisera for Rh-C/c, E/e, Cw, Kell, Fya, Fyb, Jka, Jkb, Lewisa Lewisb, Lutherana, Lutheranb, MNS, etc.

v. Special gel cards for antihuman globulin test positive


IgG, IgM, IgA, C3d, C3c etc.

vi. Provision for acid elution method.

vii. Special blood grouping cards for donor and recipient for DVI variant.

viii. Syphilis antibody detection.

Detail procedure for all compatible methodologies mention as above must be provided. 3. Automated card reading and report generation with

bar code security.












14.

i. Provision for 2 and 3 red cell panel for antibody screening, 11 cell panel for antibody identification and pooled ‘O’ cell with known phenotype for donor screening as per NACO Guidelines.

ii. Provision for NaCl/Enzyme and cold agglutinins cards, modified bromelin solution, papain, cell stab, cell thaw and cell freeze reagent.



SL. NO.





Unit Cost For each

item

Expected life of

the equipm

ent

CMC rates for

Post-Warranty next

5 consecu

tive years

DEPARTMENT. OF SURGERY ESI-PGIMSR, JOKA 1 OPERATING HAND

INSTRUMENTS OPERATING HAND INSTRUMENTS Set for LAPROSCOPIC SURGERY













22 Monopolar Cable






SL. NO.







t



DEPT OF DERMATOLOGY ESI PGIMSR, JOKA KOLKATA 1 Radiofrequency

machine Radiofrequency machine Number of items: 2 Power required: 230v/50 hz Dimensions 260x300x150 Weight 7kg Electrodes insulated Frequency 0.20-2.93 Mhz Cut: 70%cut, 30% coagulation Coagulation : 60%coagulation, 40% cut Fulguration: available intensity control: Linear


Centrifuge machine Number of items- 2 Capacity in ml: 24x5 Type of head: Angle No. of tubes: 24 Maximum speed: 3500 rpm Maximum RCF: 1250 W×D×M (MM) : 210×210×250 Supply: 221-240v, 50Hz, single phase


Binocular microscope Optical system: UIS2 (UNIVERSAL INFINITY CORRECTED) CE certified


Antifungal treated optical lens Illumination: built in transmitted Koeheler illuminator, 6v/30W halogen bulb 100-120V/220-240V ̴ 0.85/0.45A , 50/60 Hz Focussing: Stage height movement by roller guide (rock & pinion), stroke/rotation=36.8mm Full stroke range: 25mm Revolving nose piece: Fixed, quadruple nose piece with inward tilt Binocular observation: field no. 20, tube inclination:30 degree, interpupillary distance adjustment range: 48mm-75mm Stage: size-188mm x 134mm, movement range: 76mm (X direction) x 50mm (Ydirection) Specimen holder: double size holder Rubber grip: equipped as standard Condenser: type- Abbe condenser, NA: 1.25 with oil immersion, aperture in diaphragm: built in Dimensions & weight: 233mm (W) X 411mm (H) X 367.5 mm (D), 8KG


SL. NO. NAME OF







t



DEPT OF ENT ESI PGIMSR, JOKA KOLKATA 1 Surgical

Operating Microscope


1. Integrated HD monitor to display surgical steps to

students.

2. Integrated HD video recording system with HD camera

system.

3. Integrated HD still photography enabling system with

camera attachment facility.

4. Data storage, transmission and documentation facility

with appropriate software.

5. Stereo co-observation tube for assistant surgeons and

students.

6. Lens for ear and laryngeal surgery (400, 200)

7. Lens covers and microscope covers for sterility

purposes


2 Rigid Oesophagoscope

Specification for Rigid Oesophagoscope set Adult: 1. 0 degree telescope diameter 5.5mm, length 53 cm, autoclavable with incorporated fibre optic light transmission 2. Telescope guide for use with 50cm esophagoscope


set Adult 3. fibre optic light carrier for use with 50cm esophagoscope 4.Rigid oval esophagoscope, outer diameter 12 X 16 mm, length 50 cm 5. Rigid oval esophagoscope, outer diameter 10X14 mm, length, 50 cm 6. Prismatic light deflector, autoclavable with fibre optic light cable connection 7. fibre optic light carrier for use with 30cm esophagoscope 8. Rigid oval esophagoscope, outer diameter 12.2X 16.2 mm, length 30 cm 9. Rigid oval esophagoscope, outer diameter 10.2 X14.2 mm, length 30 cm 10. Rigid oval esophagoscope, outer diameter 8.6X 12.1 mm, length 30 cm 11. Fibre optic light carrier for use with 20 cm hypopharyngoscope 12. Rigid Oval Hypopharyngoscope, outer diameter 10X14 mm. length 20 cm 13. handle for Esophagoscopes 14. Adjustable magnifier autoclavable(swivel action) 15. Cotton carrier(55cm) 16. Rigid suction tube with rubber tip, straight, working length 55cm 17.spring handle sponge holder, working length 55cm 18. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 2.5mm,working length 55cm 19. biopsy forceps and foreign bodies, working length 55cm 20. cupped forceps for biopsies, working length 55cm 21. Peanut removal forceps ,working length 55cm 22. Cotton applicator, working length 30cm 23. Straight suction tube with rubber tip, working length 35cm 24. Spring handle sponge holder, working length 35cm 25. Alligator forceps, sheath diameter 2mm,working length 35cm 26. Peanut forceps, working length 35cm 27. Cupped forceps for biopsy ,working length 35cm 28. Universal forceps for biopsy and foreign bodies ,working length 35cm



Specification for rigid oesophagoscopy set , Paediatric 1, Oesophagoscope tube, size 6,length 30 cm 2. Oesophagoscope tube, size 5, length 30 cm 3. Oesophagoscope tube, size 4, length 30 cm 4. Oesophagoscope tube, size 3.5, length 18.5 cm 5. Oesophagoscope tube, size 3, length 18.5 cm 6. Prismatic light deflector ,autoclavable with connection for fibreoptic light cable 7. Rubber telescope guide 8. Adjustable magnifier (swivel action) autoclavable 9. 0 degree telescope, diameter 2.9 mm, autoclavable, fibreoptic light transmission incorporated 10. Optical forceps,2x2 tip, with spring action handle for use with telescope (for coins and flat foreign body) to be used with 30 cm oesphagoscope 11. Optical forceps with spring action handle for use with telescope (for peanuts and soft foreign body) to be used with 30 cm oesphagoscope 12. Optical forceps with spring action handle for hard foreign bodies to be used with 30 cm oesphagoscope 13. Peanut removal forceps with double action jaws, sheath diameter 1.5mm,working length 35cm 14. Biopsy and foreign body forceps, double action jaws, sheath diameter 1,5mm, working length 35cm 15. Alligator forceps for hard foreign bodies, double action jaws, sheath diameter 1.5mm, working length 35cm 16. Cupped forceps for biopsy, double action jaws, sheath diameter 1.5mm, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Straight cotton applicator working length 35cm - 3 such


Rigid bronchoscopy set, adult 1. 30 degree telescope, diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 2. 90 degree telescope diameter 5.5mm, length 50cm, autoclavable, fibreoptic light transmission incorporated 3. Rigid bronchoscope, size 8.5, length 43cm


4. Rigid bronchoscope, size 7.5, length 43cm 5. Rigid bronchoscope, size 6.5, length 43cm 6. Deflecting device for bronchoscopes and telescopes 7. FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 8. Adapters to respirator - 2 such 9. Rubber telescope guides - 2 such 10. Glass window plug - 2 such 11. Instrument guides for suction catheter - 2 such 12. Injection canula for positive pressure assisted ventilation, LUER lock, outer diameter 3.5 mm for use with bronchoscopes 13. Optical forceps, alligator, large jaws for hard foreign bodies 14. Optical biopsy forceps, circular cup, 4.3mm 15. Flexible forceps for biopsy 16. Alligator forceps for hard foreign bodies, double action jaws, diameter 2.5mm, working length 50cm 17. Peanut removal forceps, double action jaws, sheath diameter 2.5mm, working length 50 cm 18. Cupped forceps for biopsy, double action jaws ,sheath diameter 2.5mm, working length 50 cm 19. Cotton carrier, working length 50cm - 6 such 20. Sponge holder with spring handle, working length 50cm 21. Cytology brush with ring handle, working length 55cm 22. Coagulation suction tube, insulated, working length 50 cm accompanied by unipolar high frequency cord with 5mm plug, length 300cm 23. Straight suction tube with rubber tip, working length 50cm - 2 such 24. Curved suction tube with rubber tip, working length 50 cm 25. Suction tubes 4mm diameter, length 50 cm - 2 such 26. Aspirator, can be connected to suction tubes or suction catheter 27. Spare glass for aspirator 28. HUZLY Aspirator and bronchial irrigator 29. Laryngeal syringe, 5ccm, LUER lock, with canula 30. Bronchial atomizer, with graduated container and rubber bulb, length 50cm 31. Laryngeal atomizer with bulb, length 50 cm


32. Suction catheter, 7 Fr with connector 33. Suction catheter, 5 Fr with connector


Rigid bronchoscopy set, Paediatric 1. Bronchoscope size 6, length 30cm 2. Bronchoscope size 4.5, length 30cm 3. Bronchoscope size 3.7, length 30cm 4. Bronchoscope size 3.5, length 26cm 5. Bronchoscope size 3, length 26cm 6. . FLUVOG Adapter with sliding glass window plug, sealing cap, notched lense and keyhole opening, movable 7. Adapters to respirator - 2 such 8. Rubber telescope guides - 2 such 9. Glass window plug - 2 such 10. Instrument guides for suction catheter, short, for children and infants - 2 such 11. Injection canula , only, LUER lock, outer diameter 3.5 mm for use with bronchoscopes - 2 such 12. Prismatic light deflector, autoclavable with connection for fibreoptic light cable 13. Cotton applicator, working length 35cm - 3 such 14. Sponge holder with spring handle, working length 35cm 15. Foreign body basket with ring handle, working length 35cm 16. Cytology brush with ring handle, working length 35cm 17. Straight suction tube with rubber tip, working length 35cm 18. Curved suction tube with rubber tip, working length 35cm 19. Suction tube, 3mm, working length 35cm, curved 20. Bronchial atomizer, graduated container and rubber bulb, working length 40 cm 21. Graduated containers - 2 such 22. Aspirator with spare glass and cut off hole, can be connected to suction tube or catheter

6 AUDIOMETER

AUDIOMETER REQUIREMENT The audiometer should have the following specifications: *It should be a Clinical PC-based audiometer. *The manufacturer should provide instructions and provision for calibrating the instrument.


*The following tests should be able to be performed by the audiometer:

Pure tone audiometry, Speech audiometry ( Including

Speech reception threshold and speech discrimination

score), SISI, ABLB, AUTO THRESHOLD , TONE DECAY


Switch Mode Power Supply capable of withstanding

extreme

voltage fluctuations (115 V to 270 V)

INPUT: Tone, Speech, Tape, Pulse Tone.

OUTPUT: Left, Right, Bone, L + R. F/F Left, F/F Right, F/F

L+R.



Air : 120 dB Max, 125 Hz to 12 kHz., -20 dB Min.

Bone : 80 dB Max, 250 Hz to 6 kHz., -20dB Min.

Noise : Wide Band, Narrow Band, Speech Band.

Built-in Mike, Ext. Mike, Mike Sensitivity Control.

Interrupt Lock.

Printer Facility-Sequential Merged Graphs.

Memory Review.

Computer Interface.

Storage of the patient data in the hard disc for future


reference.

Connectivity to an external USB Printer to print the

reports.



It should meet the international standards


1. Tympanometry


Should have facility for producing printed report




1. SHEA aural speculum – set of 4, black finish – 3 sets

2. Tumarkin tapered slotted aural speculum – set of 4 – 3

set

3. Adsonforcep – plain – S.Steel – 6 such

4. Adsonforcep – 1x2 teeth – S.Steel – 6such


6. Lempert endaural speculum – right – 3 such

7. Mollison self retaining mastoid retractor 3 such

8. Plester self retaining retractor 2x2 prong – 3 such


9. Plester self retaining retractor 3x3 prong – 3such

10. Plester self retaining retractor – right solid blade – 3

such

11. Plester self retaining retractor – left solid blade – 3such

12. Farabeuf periosteum elevator – straight – 3 such

13. Freer’selevator double ended – 3 such


15. Zollner suction tube with 4 microtips – 3 such

16. Verhoeven suction tubes – no. 12,14,16,18,20,22,24 – 3

sets

17. Verhoeven suction tube adaptor – 3 such

18. Micro aural crocodile serrated – fine straight – 3 such



21. Micro aural scissors – straight – 3 such

22. House dieter malleus nipper – up – 3such

23. House dieter malleus nipper – down – 3 such


such


such


26. Wullstein needle – very slight curved – 3 such

27. Wullstein needle – slight curved – 3 such


29. Rosen curette curved straight shaft – 3uch



32. Circular cutting knife 60 degree – 3 such


34. Rosen elevator for lifting drum – 3such


36. Curved circular cutting knife – 3 such

37. House curette double ended – 3 such

38. House curette double ended slightly curved – 3 such



41. Mastoid micromotor drill (30000 rpm) 1

42. Straight hand piece for mastoid drill 1

43. Contra angle hand piece for mastoid drill 1

44. SS cutting burrs ( 8mm,6mm,4mm,2mm,1mm0.8mm) 1

each

45. Diamond polishing burrs (6mm, 4mm, 2mm 1mm) 1


each

9 STAPEDECTOMY SET


Round Knife 45° diameter 1 mm, length 16 cm

Flag knife

Micro elevator

Sickle Knife, double-edged, standard model, slightly


Pick 90°, 16 cm, 0.6 mm

Pick 90°, 16 cm, 0.8 mm

Ear Forceps extra delicate, serrated, 0.4 x 3.5 mm,

working length 8 cm

Ear Forceps extra delicate, pointed, serrated, 1 x 4.5


Scissors delicate standard model, blade length 8 mm,

working length 8 cm

Malleus Nipper, extra delicate, upbiting, width 0.8









Perforator, length 16 cm, diameter 0.8 mm

Footplate burr

Measuring Rod, length 16 cm, Marker pins at 3 mm,

4 mm, 5 mm

Holding Forceps, for holding Stapes and Total

Prostheses, length 13.5 cm

Crimping Forceps for Total Prosthesis, length 10.5 cm

Scissors, for Total Prostheses, length 11 cm

Micro Hook, 2.5 mm, 45°, length 16 cm

Diamond Straight Shaft Burr, length 7 cm, Diameter

1.4 mm


Seeker, ball end angled 45°, 15.5 cm, size 3.


6 cm, O.D. 0.7 mm- 2 in number

Suction Cannula, angular, LUER Lock, working length



6 cm, 1.3 mm- 2 in number






Adaptor, for suction cannulas- 2 in number

Curette, large, spoon sizes 2 x 3.2 mm and 1.6 x 2.6

mm, length 15 cm


10 ADENO-TONSILLECTOMY

ADENO-TONSILLECTOMY 1.BoyleDevis mouth gag- 1 (with full set of tongue blades) 2.Draffin Bipod- 2such 3.Magauran plate-1such 4. Tonsil holding forcep-1such 5. Tonsillar knife with dissector - 1such 6.Mollison’s blunt tonsillar dissector and anterior pillar retractor-1such 7.Serrated tonsillar dissector and anterior pillar retractor- 1such 8.Long straight tonsil hemostatic forceps- 1such 9. Naegus artery replacement forcep- 1such 10.Naegus ligature slipper and knot tier- 1such 11. Eve’s tonsillar snare- 1such 12. Long dissecting scissor- straight- 1such 13.Yankauer’s oral suction- 1such 14. St. clair thomson’s adenoid curette with cage- 3 sizes- 1each 15. Long tooth forcep- 1such 16. Quinsy forcep- 1such


SEPTO-RHINOPLASTY




01 set






8. Tilley’s antral trocar and cannula-1such






14. 2mm osteotome with guard-1 such


16. 10mm osteotome with gurad-1 such

17. Mallet-1 such









MICROLARYNGOSCOPY AND MICROLARYNGEAL SURGERY 1. Kleinsasser’smicrolaryngoscope- 1such

2. Anterior commisure laryngoscope- 1 such



5. Microlaryngeal cup forceps- straight, right turn, left

turn, up turn- 1each


7. Microlaryngeal scissors- straight, right turn, left turn- 1

each

8. Microlaryngeal blunt dissector with handle- 1 such

9. Microlaryngeal knife with handle- 1such

10. Vocal cord retractor with handle-1 such


12. Microlaryngeal suction with diathermy- 1such

13 GENERAL INSTRUMENTS

GENERAL INSTRUMENTS

1. AdsonTooth forceps- (5”)-4 such

2. AdsonNontooth forceps- (5”)-4 such

3. Needle holder- (6”/5”/4”)- 6 each



5. Mosquito Artery forceps- curved(4”)- 24

6. Medium artery forceps-curved(5”/4”)- 6 each

7. Large artery forceps- curved(7”)- 6

8. Right angle artery forceps- large/medium(7”)- 4


10. Sinus forceps-2

11. Kocher’s gland holding forceps(6”)- 2

12. Babcock’s gland holding forceps(6”)- 6

13. Alle’s tissue holding forceps(5”)- 12

14. Tissue cutting scissors- straight/curved(5”)- 2 each

15. Medium dissecting scissors- curved(6”)-4

16. Small dissecting scissors- curved(4”)- 4


18. Metal suction cannula- 3 sizes(

2.5mm/3mm/4mm)- 4 each



21. Towel clip- 24


23. Sponge Holding Forceps (8”)-6


24. Catspaw- 4 pair

25. Gallipot-6




14.


Main Console




4. Should have inbuilt pumps each for Irrigation and Cooling.

5. Should have multifunction ergonomically designed foot control with


light emission for easy identification.

6. Should be able to control Speed / Mode, Forward / Reverse toggle, Active hand piece change from the Foot control itself.

7. Should have option for remote control Irrigation to operate from sterile

area.



10. Should have provision to connect facial nerve monitor with the

Otology drill.



Hand piece:












11. Should be compatible with Frontal Trephination System. Microdebrider blades and burrs

1. Straight Blade 0 Degree 4 mm- 01 pc. 2. 40 Degree Curved Blade 4 mm 01 pc. 3. 60 Degree Curved Blade 4 mm 01 pc. 4. 120 Degree Curved Blade 3.5 mm 01 pc. 5. Inferior Turbinate Blade 2.9 mm 01 pc. 6. 40 Degree Adenoid Blade 4 mm 01 pc. 7. Tonsillectomy Blade 4 mm 01 pc. 8. High Speed Diamond DCR Bur 2.5 mm 03 pcs. 9. Tapered Diamond Bur 4 mm 01 pc. 10. Laryngeal Blade 2.9 mm 22.5 cm Long 01 pc.

High Speed Otology Drill (Motor) 1. Coolant Tubing 02 pcs. 2. 7.5 cm Straight & Angled Attachment 01 pc. Each 3. 1 mm to 7 mm Cutting Bur 01 pc. Each 4. 1 mm to 7 mm Diamond Bur 01 pc. Each

Low Speed Otology Drill (Motor)


1. Crura Saw 0.75 mm 01 pc. 2. Perforator 0.5 mm 01 pc. 3. 0.6 mm to 0.8 mm Diamond Burr 01 pc. Each

Automatic Lens Cleaning System 1. 0 Degree Endoscopic Sheath 05 pcs. 2. 30 Degree Endoscopic Sheath 05 pcs. 3. 45 Degree Endoscopic Sheath 05 pcs. 4. 70 Degree Endoscopic Sheath 05 pcs. 5. Finger Switch 01 pc.


SL.


& INSTRUMENT SPECFICATION Make/Mod

el No. (to be filled in by tenderers)



Unit Cost For each

item


t




Polymerase Chain Reaction (PCR) System with Qualitative and Quantitative detection




c. The Real time PCR System must at least have


the following In vitro Diagnostics approved kits available from the same manufacturer which are pre-validated on the quoted model :









e. The Automated Real time PCR System should be accompanied with a desktop or laptop computer and printer system (required for the functioning and data storage and printing of reports) with original operating system and free software support for the lifetime of the machine.




Features Specification Thermal Cycler Mechanism





Uniformity







Excitation Plexing

Should be minimum 5 plex. Should have capability of further increasing the multiplexing beyond 5-Plex in singe tube.

Dynamic Range Should be of 10 orders of magnitude Reaction Volume

10 µl-100 µl





In vitro Real Time In vitro Diagnostics approved validated kits on quoted


diagnostics Approval

model as mentioned above should be available with instrument manufacturer. Instrument should also be In vitro diagnostics certified for use in diagnostic laboratory.

2 Automated (Multicapillary

) Capillary Electrophoresis

System




c. System should comewithReady-to-rungelcartridgesallowing samplesto be analyzed replacing laborintensiveagarosegel electrophoresiseliminating the need for handling carcinogenic compounds likeethidium bromide.

d. Post PCR samples should be directly analyzed for fragment analysis using the system without prior purification of samples.

e. The instrument should be usable for genotyping, restriction digestion, qualitative monoplex or multiplex PCR, PCR-based cDNA library screening and other routine molecular


biology applications.







l. The instrument must eliminate the need for a separate Gel Doc system after Electrophoresis.


3 Biosafety


with accessories


a. The Biosafety cabinets must have International and/or National quality and safety certification, e.g. CE and/orUL/cUL-listed and/or ISI


certified.




e. SmartFlow Indicator, with Digital airflow verification technology (The balance of downflow and inflow should control the cleanliness and containment – preventing room contamination from reaching the BSC work surface and keeping any biological hazards in the BSC work area from escaping out the front opening.)

f. Ergonomic design with 10° Slopped front, preferably with Armrest.



i. Receptacles in the Rear Wall: load capacity of


up to 5A



4 Micropipettes

(0.5-10μL set, 10-100μL set, 100-1000μL set) with disposable Tips and autoclavable boxes.



i. 0.5 - 10μl

ii. 10 - 100μl

iii. 100 - 1000μl



d. The micropipettes should have Spring Loaded Tip Cone for improved ergonomics which


should be tight fit to the tip.



g. Ejector withvery low operating force, positioned for perfect ergonomics.



5 Vortex Mixer Vortex Mixer (with accessories):


b. Should be ideal for applications demanding repeatable results.









IV. 24 to48 numbers vertical Microtube Holder for mixing 0.25 to 2.0mL microcentrifuge tubes / PCR tubes or high-density foam inserts to accommodate 24 to 60 microtubes.

V. Vertical tube holder for mixing at least four (04) 50 ml tubes together.

VI. Vertical tube holder for mixing at least four (04) 5 ml (09 to 13 mm diameter) tubes together.

6 Molecular

grade DNAse RNAse free Water Purification System


a. The entire water purification system should be equipped with three part equipments, quoted together by the same bidder, including:


a. A Pretreatment Water filtration reverse osmosis system

b. A Pretreatment Iron, hardness and particleremoval system

c. A Molecular grade Water purification system proper.



d. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should be able to be connected in series connection, directly from the pipeline ground-water feed and should be able to deliver output water quality compliant to the acceptable limit of the feed water of the Molecular grade Water purification system proper(iii) as mentioned below in tight fitted series connection.

e. The Pretreatment Water filtration reverse osmosis system (i) and the Pretreatment Iron, hardness and particle removal system(ii) should


be able to deliver at least 15litres of water per hour to the Molecular grade Water purification system proper(iii).


a. * 2 Stage pretreatment system

b. * 5 micron and 1 micron wrapped type depth filter

c. * 3 Pressure gauges

d. * Less than 50 Db noise levels

e. * Automatic low/high pressure cut off

f. * DC pump with 0-2 pressure at 120L /hr

g. * Inlet screen filter to DC pump

h. * Optional filters : 0.5 micron

i. * Optional filters : Activated carbon

g. The Molecular grade Water purification system proper (iii) should be able to deliver the required quality of pure and ultrapure water from its feed water acceptance level of:





12) TOC <2000 ppb

h. The Molecular grade Water purification system proper (iii) should beable to deliver reagent Grade Type 2 water (pure quality) and Reagent grade Type 1 standard water (ultrapure quality) as defined by standard international quality control organizations like ISO:3696 standards and / or Clinical and Laboratory Standards Institute-Clinical Laboratory Reagent Water standards and / or ASTM standards.

i. The Molecular grade Water purification system proper (iii) should have two different points of delivery. It should be able to deliver through one point of delivery, reagent Grade Type 2 water (pure quality) bacteria and pyrogen free water, which may be used for basic laboratory needs, such as buffer and reagent preparation, microbiology media preparation, histology and rinsing of glassware of the following grade:


Parameter Value













j. The Type 2 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:

1. Pretreatment cartridge

2. Reverse Osmosis with a high flux polyamide membranewith 94- 99% ion rejection backed by Pump with temperature feedback mechanism so that the flow rate should be 3 ltr/hr at room temperature .

3. Electro Deionization with auto regeneration by electric current, eliminating the need for chemical regeneration or replacement of DI


resin cartridges with carbon beads at cathode of the EDI module to prevent scaling inside of the module

4. Activated Carbon cartridge

5. UV lamp with 254 nm Wave lengthbefore entering the tank

6. Recovery loop with capillary tube and diaphragm valve to minimize water wastage

7. Carbon beads at cathode of the EDI module to prevent scaling of the module

8. Permeate divert valve which will divert low quality water to the drain

9. Coaxial resistivity cell with a flow through design and a cell constant of 0.01cm-1

10. Display both compensated and non-compensated temperature accurate within ±0.1°C.

11. The reservoir tankshould be blow moulded, cylindrical PE reservoir with a conical bottom and opaque walls with a minimum of 30 litres capacity.

12. Sensor rod float switch, programmed to have high and low level cut-off


based on water level in the tank.

13. The reservoir tank should possess a tank vent filter made of soda lime, activated carbon and 0.22 micron hydrophobic membrane to trap contaminants present in atmospheric air.

14. The Point of Delivery units should be of adjustable height and rotating arm-adjustable to any glassware.

15. There should be multicolour monitor displaying resistivity, TOC, level of water in reservoir, volume dispensed etc.

k. The Molecular grade Water purification system proper (iii) should also be able to deliver through a different point of delivery, Type 1 water (ultrapure) DNA, RNA, DNAse, RNAse free water for molecular biological applications, suitable for genomics applications (quality at least equivalent to DEPC-treated water) and cell culture of the following grade:


Parameter Value












l. The Type 1 water (pure quality) production system / chamber of the Molecular grade Water purification system proper (iii) should be enabled at least with the following technologies:

9) Water source feed should be a closed connection from the Type 2 water reservoir tank eliminating any possibilities of contamination.

10) Re-filtration through two stage mixed bed ion exchange and activated carbon cartridge to remove ionic and organic contaminants to trace levels.

11) Low pressure mercury vapour lamp made of quartz with 185/254 nm dual wavelength


UV lamp.

12) Should contain high-precision resistivity meters with following features-




13) Should contain a built in TOC monitorwith a Quartz celland UV lamp which should accurately measure online TOC from 1- 999 ppb.

14) To prevent deterioration of water quality during periods of non-use, the ultrapure water system will be able to recirculate water to maintain high water quality.




m. To avoid maintenance errors and to improve traceability, the internal primary consumable water purification cartridges should have a built-in RFID tag.


7 Automatic

Electronic Laboratory Balance

Automatic Electronic Laboratory Balance

a. The Electronic Laboratory balance should have International and/or National quality and safety certification, e.g. CE and/or UL/cUL-listed and/or ISI certified.







8 Carbon dioxide

(CO2) Incubator

Carbon dioxide (CO2) Incubator: Technical specifications


2. Air jacketed heating system with temperature control by microprocessor.

3. Temperature range from ambient +3 o C to + 55 o C.

4. Temp. Deviation with respect to time is + 0.1K. 5. Continuous air Contamination prevention by in

chamber Class 100 HEPA Air Filtration. 6. Event based Decontamination with in-built moist

heat High temperature cycle, with ease operability, preferably single switch operation of sterilization cycle. The built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc without removing sensor, fan or any other fitting. The system should employ automatic decontamination routine at moist heat of 90o C or equivalent.

7. CO2 control by Microprocessor based & by heat resistant Thermal Conductivity detector to


withstand heat of decontamination.







14. Built-in audible and visual water level alarm should be available when the water reservoir (water tray less system to avoid contamination) needs to be refilled to ensure a constant high


level of humidity and to prevent cultures from drying out.




18. Suitable for 230V, single phase 50Hz operation. 19. Suitable servo voltage stabilizer with high

voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc.



9 Hot air oven



2. Corrosion-resistant galvanized steel chambers. 3. Digital display and timer facility 4. Upper temperature cut off ( automatic) 5. Microprocessor temperature control.


6. At least 2 tilt proof wire-mesh shelves 7. Chambers and heating elements should made of

corrosion resistant steel. 8. Chambers should be easy to clean. 9. Volume minimum 75 litres 10. Operating temperatures from 50° to 250°C. 11. Easy to use, microprocessor-controlled touch

button operation.

10 Automatic

Evacuation-

replacement

system for the

culture of

anaerobes,

capnophiles,

and

microaerophile


1. Automatic evacuation-replacement system with at least One to Three (1-3) gas inlet connections: CO2, H2, and O2 and One to Four (1-4) jar outlet connections.


3. The System should have pre-programmed functions with easy to use, preferably single touch key operations for preparing Anaerobic, Microaerophilic and Capnophilic culture conditions.





c. Two (02) equivalent jars: Diameter and height: Ø =175mm, h=240mm (±10%) Volume: 5.65 L (±10%) Contents: 1 stack of 12 Petri dishes with Ø 14.5cm (±10%)



f. One (01) equivalent jars: Diameter and height: Ø =230mm, h=240mm (±10%) Volume: 9.66 L (±10%)


Contents: 3 stack of 12 Petri dishes with Ø 10cm (±10%)


5.Palladium coated catalyst pouches ideal for the big jars:

h. SIX (06) Sets of catalysts, ideal for the big size jars are to be provided along with, which can be easily re-used by reactivation in Hot air oven.

6.Reducing valve: To reduce the pressure in the gas cylinder to the system working pressure, a reducing valve has to be provided with the gas cylinder(s). This must be a 2-step reducing valve, preferably calibrated and supplied by the same manufacturer, which has manufactured the Automated evacuation-replacement system. The working pressure should be adjustable to 1.8 Bar or 26 psi.

7. Option of user programming function (free user programming of oxygen level, gas mixture and evacuation level) should be there. 8. Option for Preprogrammed recipe for oxygen level, gas mixture and evacuation level should be there. 9. The bidder should also quote for 18Kg CO2, H2, and O2 Cylinders filled with CO2, H2, and O2 gases 99.5%


or better purity required for operation, along with cost of refill should also be quoted.

11 Hot air sterilizer, 160ºC

Power supply: 440 V,AC, 3 Phase Material of Construction: SS 304 Motor : Supply: 0.5 HP: 1440 RPM: 1-0, 230 V AC: 50 Hz Exhaust: 2 HP 2800 RPM Blower (Impeller) : Supply: 210 x 117 Wmm Exhaust : ---- Dimensions: (W x D X H): 1060 x 1040 x 2150(Approximate) Bioclean work space: 877 x 660 x 610 Filters (W x D X H): Pre filter: size : 305 x 380 x 45 Fresh Air Filter: Type: EU-6 Intermediate: Size: 915 x 610 x 45 Type: EU-13 Final Filter: Size: 915 x 610 x 75 (ANTIMICROBIAL) Type: EU-13 Intermediate: Size: 915 x 610 x 100 (ANTIMICROBIAL) Type: EU-13 Exhaust filter: Size: 915 x 457 x 100 Type: EU-13 Differential pressure gauge : Magnehelic pressure gauge Across HEPA filter wrt. ambient: 0-25 mm Across work space wrt. ambient: 0-10 mm Illumination: UV light: 1.5' L & 30W FLU light: 1.5' L & 20W Special features: Virus burnout system


12 Venereal Diseases

Research

Laboratory (VDRL)

shaker


13 Macintosh fields

anaerobic jar

Anaerobic system






Petri plate carrier

14 Dissecting

microscope



SL. NO.





Unit Cost For each

item


t





1. Chair Unit : Electrically operated

programmable chair, both hand and foot

control operation, over hanging delivery

unit, spittoon with auto flush, High and

low intensity operating light, motorized

suction (with auto drain) X-ray viewer,

three way syringe, zero backache

doctor’s stool.

a. Light cure unit : Light emitting diode (LED)

b. Air rotar with Controlled box : along with

(i) Air compressor: Minimum 1.5 HP, Oil free


2 Dental Electro Surgery

Unit with multiple

Dental Electro Surgery Unit with multiple tips


tips

3 Automatic dental X-

ray film developer –

IOPA (Intra oral Peri

apical radiograph)

automatic processor

Automatic dental X-ray film developer –IOPA (Intra oral

Peri apical radiograph) automatic processor

4 Lead apron for use

along with dental X-

ray unit

Lead apron for use along with dental X-ray unit

5 Electric High Speed

Micro motor

Electric High Speed Micro motor of about 35000 RPM with reverse forward switch, foot control, with Both straight and contra angle Hand Piece.

6 Ultrasonic Scalar Ultrasonic Scalar : with four tips


SL.


& INSTRUMENT




Unit Cost For each

item


t



DEPARTMENT. OF RADIOLOGY ESI-PGIMSR, JOKA 1 500 MA X-RAY

MACHINE Technical specification of 500 MA X-RAY MACHINE

A 500 mA. Multipulse High frequency X-Ray machine for Radiography. RATINGS: 50KW High frequency X-Ray generator for radiography . Radiography Parameters: 35 to 125KVor150 KV Multi steps as many as possible Small Focus – 100 mA & 200 mA Large focus – 300mA, 400mA and 500mA mAs – 1.25 to 200 mAs in multiple steps as many as possible. Control: Floor or Wall mountable control panel, ON and OFF switches Automatic safety system to block unwanted exposure factors beyond tube ratings. Digital display of active KVP, mA and mAs. Hand switch with flexible long retractable cord. Compact durable soft touch keypad. Table or Vertical Bucky selection and table top radiography switch. Ready and X-Ray on switch with indications. Tube Unit: Rotating anode tube unit with dual focus x-ray tube insert. Anode Speed:- Minimum 2800 rpm. Focal spot:- Dual focus, Small focus:- 0.6mm to 1 mm Large focus:- 1.2mm to 2.00 mm Protection:- Totally thermal Protection. HV/HT cable compatible with X-ray tube. Motorized tube movement with all round tube angulation preferable


Collimater: Manual light beam diaphragm. Tube Stand: Floor to ceiling stand and with counter balanced tube head 360 degree rotation (rotatable+/- 180 degree), tube rotation with column axis all round movement ( Longitudinal, Transversal, UP & Down), mounted on floor ceiling rails for convenient movement. Safety lock in case of wire shortage. Ceiling suspension tube preferable. Table: Motorized table with 6 way movement (table height adjustment) . Motorized bucky with grid ratio 8:1 (80 to 100 lines per inch). Stainless steel cassette tray with electromagnetic brakes. Stain free laminated table top. Operating Voltage: 400-440 volt AC 50 HZ. Three Phase. Chest Stand: Motorized or manual Vertical Bucky Stand with counter balanced. Head to Toe Vertical travel (455mm to 1900mm). Electromagnetic locking method (lock released when switch is pressed). Also separate Cassette holder attachment with the Vertical Bucky Stand for direct exposures. Accessories:- Compression Band, Hand Grip & foot step. Unit should have the AERB approval.


SL. NO. NAME OF





Unit Cost For each

item


t




1 NEONATAL

RESUSCITATION

UNIT WITH

WARMER


a. Controlled Resuscitation system. Oxygen

Administration facility, Low Pressure suction and

warming with infrared Radiant Heat Source.

b. Inline Manometer,

c. Oxygen Administration Facility: i) Oxygen Flow

control facility with flow meter (o to 15

lit/min).ii) Oxygen Pressure Adjustment valve, iii)

Humidifier Bottle, iv) Facility to keep Oxygen

cylinder, v) Connecting hose for wall Outlet. vi)

Silicon Autocluvable Resuscitation Bag with 00

and 01 size of Masks.

d. Slow Suction: This is a specially designed

electrically operated slow suction. Apart from

others, it is non-motorized slow suction. The

suction pressure can be adjusted as per


requirement.(0-110 mm Hg.)

e. Servo Control System to maintain an optimum

skin temperature.

f. Precise cradle Temperature control.

g. Manual Warming Facility.

h. Stop Watch- additional Facility provided to note

down timings during monitoring various vital

signs of baby, e.g. temp. Heat rate, Respiration

Rate.

i. Reminder Timer.

j. Apgar Timer with Birth Time Recorder.

k) a) Power Source: 230 +/- 10% volts. 50 Hz.

B) Control Method: Micro-Computer Controlled

intelligent proportionate Power Control.

c) Heater Capacity: 600 Watts.

d) Light Source: 60 watts bulb to examine

babies.

e) Power Consumption: 850 watts.

l) Temperature Controller Specifications:- i. Skin Mode Control: From Body Temperature to 38

C. ii. Air Mode Control: From Room Temperature to 39

C. iii. Resolution: 0.1 C.


iv. Accuracy: +/- 0.2 C. n) Alarms: (Audio visual with auto Reset facility) Alarm Condition Message on Display

Skin + I.C. HI

Skin - I.C. LO

Air +1.5 C HI

Air - 3 C LO

Skin >38C OVER

Air<39C OVER Skin/Air Sensor Failure Fail Heating system Failure HEAT OFF o) Safety Cutoff; When Skin Temperature exceeds 38C. When Cradle Temperature exceeds 39C. p) Power Failure Alarm: Audio –visual. q) Distance between Heater source and Baby: 88 (34.5) r)Dimensions: Height X Width x Depth-cm (inch) 203 (80) X 63.5(25) X 100 (39.5) s) Baby Tray: Length 72 (28.3) x width 45 (17.7) t) Should have 1 drawer system attached with the equipment for storage facility. w) It should be in compliance with ISO 9001:2000. Should have Q.A. International Certification Limited.



Unit should have blue cool led light source with wave length

of 450-460 nm.




No Heat Generation.




Height and Angle Adjustment facility.

Mounted on Castor Wheels for Easy Mobility.

Can be used in Conjunction with any make radiant Warmer.


Irradiance> 60 u/W/cm2/nm.at 45 cm from the light source.

Wavelength 450-460 nm (peak 455 nm free of UV and IR

radiation.

Height adjustable from 1198+/-20 mm to 1680+/-20 mm

UNDER SURFACE SOURCE UNIT:

Unit should have blue cool led light source with wave length

of 450-460 nm.


Light intensity is variable from 7-60 um/nm/cm2.at a distance

of 45 cm.

Infant care Trolley in Stainless Steel Specification:-


Convenient working level with 6 mm thick imported acrylic

collapsible side support, accessible from all sides.

Acrylic Tray with Foam mattress. IV Pole & Facility to take

X-ray.



Stand with separate Infant care trolley.

Mounted on 4” castor wheels for easy mobility.

Infant care Trolley with transparent acrylic bed and bubbles

mattress for baby. Fabrication in mild steel, baby bed area in

Stainless steel.

3 CPAP MACHINE SPECIFCATION OF CPAP MACHINE SYSTEM: Valve based continuous flow CPAP and IPPR. Bubbler based bubble CPAP. DISPLAYS: Digital and Analog Display of CPAP pressure in CPAP Mode. Continuous Digital display of Delivered pressure in IPPR Mode. ALARMS; CPAP High and low Alarms (Audio Visual)

PRESSURE GAUGE: -20 to 100 cm H2O

GAS MIXNG: Air-Oxygen Mixer using calibrated

Rotameters.

AIR SOURCE: Inbuilt Air Compressor (Optional) (20 to 90

PSI).

O2 SOURCE: Inlet for Oxygen Gas (20 to 90 PSI).


Asccessories: Warmidifier, Breathing Circuits(Disposable).

CPAP Interface, Nasal Prongs, Dummy Test Lung.


SL. NO. NAME OF





Unit Cost For each

item


t



Department of Biochemistry 1 SEMI

AUTOMATED BIOCHEMISTRY

ANALYZER

SPECIFICATION FOR SEMI AUTOMATED BIOCHEMISTRY ANALYZER. I. Item : Semi Automated Biochemistry Analyzer with UPS 0.5 KVA. II. Analysis Option: a. Absorbance b. 1 point end linear & non linear. c. 2 point end linear & non linear. d. Rate linear & non linear. e. Immunoturbidimetry. OPTICAL SYSTEM III. Light Sources: Pre aligned Quartz halogen lamp. IV. Wave Length: Automatically Selectable narrow band interference quartz filter within wavelength of 340 -700 nm -- fixed seven or eight filters and two optional filters as per users choice. V. Measurement Time : Selectable. CUVETTE SYSTEM Cuvette : a. Flow cell Cuvette. b. External rectangular Cuvette. VII. Cuvette Temperature: Peltier control & programmable at 25˚C, 30˚C and 37˚C. VIII. Aspiration System: Motor driven pump.


IX. Aspiration Volume: Programmable. X. Cuvette Blanking: Automatic. FUNCTIONS

XIII. Programmable Parameter: About 100 user defined test programs including routine biochemical parameters, enzymes, immunological markers, truly open system, selection through keyboard. XIV. Calibration: Automatic against standard / calibration. XV. Quality control: a. 2 levels of control (at least) b. Levey - Jennings diagram. c. Manual entry of QC result. XVI. Memory Storage: a. Minimum 200 patients result. b. Calibration result. c. Quality control result for 01 month. XVII. Display: a. Graphic LCD. b. Display of reaction curve, absorbance, temperature. c. Display of result of real time. d. Graphical display of reaction time. e. Calibration curve graphical display. XVIII. Key board: a. Chemical and moisture prevented single touch alphanumeric membrane key panel. XIX. Printer: a. Built in thermal printer with full graphic facility. b. Parallel full page ink printer with formatting options.

OPERATOR INTERFACE


XX. Reporting format: a. Conventional b.SI unit(Optional/Interconvertible). XXI. Recalculation : Recalculation of result following modification of calibration, measurement timings and wavelength. XXII. Automatic Flagging: a. Absorbance and linearity cheek. b. Reagent stability. c. Substrate depletion. XXIII. Peripheral interfacing: a. Parallel ports for external printer , keyboard and PC. Software PC Compatible. XXV .Power Cord : Indian Type 3-pin power cord locally available and replaceable . XXVI: Dust Cover : Washable dust-covers for main unit and key-board, etc. XXVII: Working Manual : Working Manual by

manufacturer in original

2 HbA1c analyzer Specification for HbA1c analyzer Analytes HbA1c Principle HPLC Technology Sample Volume Less than or equal to 3ml. Sample loading Should load (50-60) samples simultaneously capacity with continuous loading facility. Throughput < 8 minutes per sample Assay time Minimum Assay Time Assay Should be able to detect correct HbA1c values in the presence of

SOFTWARE

ADDITIONAL


commonly occurring abnormal haemoglobin variants. Primary tube sampling Facility should be there Calibrators External /Internal Control Control should provide External /Internal normal and abnormal control. Check facility Should be able to check all system parameters (cartridge, reagent, waste etc) CV < 3% Approvals Any two approval from the following CE / FDA /IFCC/NGSP approvals

3 Test Tube rack _________________________


Water Bath Rectangular: Thermostatic control /; Boiling Water baths, with lids having 8-12 Holes with shaker Specification: Temperature range from ambient to 950C. Thermostatic control with an accuracy of +/- 10C. Double walled with inner wall of stainless steel and outer of MS powder coated, with lids of SS. The unit is provided with immersion type heaters to work on 220 V.A.C. The unit is supplied with indicating lamps. Main chord and Plug. Size of the inner chamber- 355x100mm; 1.5kw with shaker.

5 Colorimeter Specification:Photoelectric colorimeter with filter Digital Colorimeter - Highly Stable & accurate Ideal Clinical instruments for Blood & Chemical Analysis. Models Available ME 953 C 5 Filter ME 954 C 8 Filter ME 944 C 8 Filter With Battery Option. Range : 400 nm to 700 nm Filters 5 High Standard Filters, Accuracy ± 0.02 O.D., Reproducibility ± 0.01 O.D., Out Put Optical Density 0 to 1.99, Display 2 ½ Digit LED Display, Detector Selenium Photo Cell, Light Source 6.2 V 0.3 Amp. Tungston Filament Lamp, Min. Volume 1 µl., Power 230


V ± 10% 50 Hz AC, Size (LXBXH) 225 x 230 x 150 mm, Weight 4 kg. (Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.


SL. NO. NAME OF





Unit Cost For each

item

Expected life of the equipment



DEPARTMENT OF PHARMACOLOGY

1. Cannula-made of corning glass (Arterial- hollow bulb with three arms, Venous–hollow glass tube- 4-5cm length & 3-4 mm diameter Syms cannula)

2. Four Unit isolated organ bath palmer F.67 For Internal Organs with stirring arrangements, made of transparent acrylic sheet, chemically welded to make leak proof. Complete with uprights, organ & oxygen tubes, capillary tubing, and frontal lever etc.Temperature by immersion heater and control by thermostat.

3. Dissection instruments and injection syringes as required Sets containing surgical standard scissors-2, curved scissors-2, pointed scissors-2, artery forceps-2, Mosquito artery forceps-2, scalpel handle-2, plain forceps-2, toothed forceps-2, small retractors-2, etc. Probes-2, hooks-2. To be supplied with proper cover and box.

4. X-blocks as required(Open and Closed) Machined from solid Brass rod, richly chromium plated to hold 9mm, 6mm and 12.5 mm rods

5. Hook grip rods as required- Should be suitable to fit in an X-block

6. Plain stand

7. Hair Aesthesiometer-Palmer W.290

8. Copper Trays (10”x8”x1”)

9. Microscopes ordinary - With fixed bright filed two lens condenser and iris diaphragm, heavy metal stand with triple nose piece. Coarse adjustment by rack and pinion and fine adjustment by precision grade slow motion arrangement in a beautiful storing cabinet - Total magnification 675 x Eye pieces H10x, H15x Objectives 10x, 45x (spring loaded)


10. Chemical Balance – Sensitive Balance beam scale, capacity: 120g/0.01g 220g/0.01g 320g/0.01g 1200g/0.01g 2200g/0.01g 3200g/0.01g. Power AC/DC with lithium battery. Display: LCD/LED with back light. Fan size: diameter 130mm.

11. Skin and Rectal Thermometer Barun -

12. Starling's or Heart Lever:-This lever is used to record the contraction of heart. The differences between this & other isotonic levers is that fulcrum lies at one end beyond the point of attachment. It consist of a frame carrying a light lever arm with holes and notches supported by a fine adjustable nickel silver spring attached to an adjustable hook.

13. Microscope with mechanical Stage and oil immersion

14. Frontal writing lever - This lever is designed in such a way that the writing point rotates freely about its axle. This helps in reducing the tension between the smoked paper and the recording tip. The contraction are recorded as straight line

15. Fixit lever - the levers can be fixed to the spindle in the center p f which a vulcanite spindle on one of these pins lever fits, sliding through the frame is a rod carrying a spring that can be caused to bear against the roller its turning while other adjustment are made.

16. Colorimeters

17. Condon’s Drop Recorder-Palmer B-75

18. Jacquets graphic chronometer

19. Museum drugs specimen boxes rectangular, acrylic with cover. Sizes:- 9”x5”x4”(inch)& 6”x4”x3”(inch)

20. Microscope lamps - standard quality

21. Multimeter

22. Operating Table- JKA-172 : Suitable for Rabbits, Rats, Guinea Pigs and such like small animals. Top is of Stainless Steel and provided with adjustable head holder, tie-cleats, cut-back at the head-end with warming chambers.

23. Instrument Trolley (30”X18”X30”)


24. Instrument Trolley( 48”X24”X30”)

25. Manometer mercury glass U-tube (5 mm bore , two vertical limbs 30 mm height half filled with mercury (upto 250 mm of Hg)

26. Tracheal cannula metal ( z-shaped & y- shaped)

27. Bull dog clip

28. Rat holder- single u and ring pattern 38 mm with Universal joint

29. Mercury manometer –Meriam, All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly, lapped to eliminate leakage and are fitted with feather weight stainless steel capillary. Standard Mercury Mercury Manometers: Without stopcock, with adjustable scale.

30. Autoclave electric-small

31. Sterilizer electric size 12”x8”x6”

32. Stimulator electronic Arthus Thomas- Selectable pulse per second in different steps and pulse with, continuous variable volt in multiple of 1 and 10 with internal, external and single pulse mode

33. Flame Photometer

34. Manom

eters

Mercur

y

All Manometers are fabricated from true-bore

Borosilicate glass, floats are perfectly, lapped to

eliminate leakage and are fitted with feather weight

stainless steel capillary. Standard Mercury

Manometers: Without stopcock, with adjustable scale.

35. Marey’

s

Tambo

urs

Traditional (5cm to 10cm diameter)

36. Physio

graphs

with

(Earthing chord, chart paper, ink pen, ink etc.)

Recording system, amplifier, different couplers like bio

potential, EKG, strainage, pulse respiration,


transd

ucers,

couples

and

other

relevan

t

access

ories

temperature and isotonic couplers, speed selection is

easy and instantaneous. Channel width is 70 mm,

Ink writing pen is 120 mm in length to minimize arc

distortion. Main Amplifier is fitted in the console

having switch selectable sensitivity range from 50

microvolt per cm to 100 milli volts per cm in eleven

steps as 50,100,200,500 mv/cm and

1,2,5,10,20,50,100 mv/cm.

37 Kymog

raph

(studen

ts)

Electri

cal

indepe

ndent

unit

Electrically driven recording drums suitable for use by students for general experiments. Drive mechanism consists of Constant speed electric motor and accurate

Gear-box contained in the base together with robust plate clutch. Engagement of various gear ratios are effected by sliding the lever into the slot marked with

surface speed or by a knob in separate models. Main cylinder and Stainless Steel spindle have been

standardized to make the same universal and interchangeable. Double electric contact arms are clamped on the main spindle and a stout double-

contact block is fitted on top of the base. Gear ratios i.e. 640 mm, 320 mm, 25mm, 12.5mm, 2.5mm,

1.2mm, 0.25mm, and 0.12mm per sec, are effected by sliding lever into the slot marked with 8-surface speeds. Highly accurate speeds

Auto concentration curve (crc) mode and normal mode.

Sturdy body

Corrosion resistant

Low power consumption


Easy height adjustment

Writing lever



Isometric Lever

Vibrating read, variable interrupter Time marking – tuning fork (100 hz), spring time

marker, electromagnetic time marker

38 Trache

al

Canula

Metal

Made of Brass with adjustable Air-vent. Should be

able to use for endo-tracheal intubation of big animals

like Dog & Cats

39 Weighi

ng-

Machin

e for

small

animal

s like

rats

and

guinea

pig

Animal weighing scale; Livestock scale: slip proof-pan,

waterproof-design, with railing and door. High legs for

rough ground

40 Weighi

ng-

Machin

e for

big

animal

s like

cats

and

Animal weighing scale; Livestock scale: slip proof-pan,

waterproof-design, with railing and door. High legs for

rough ground


dogs

41 Appara

tus for

isolate

d

rabbit

intesti

ne

A Cylindrical copper bath with heating element

controlled by thermostat. Complete unit with

uprights, glass inner vessel and oxygen tube with

platinum tip frontal lever from SS capillary tubing,

fitted on teak base board

42 Animal

trolley

with 12

cages

Fabricated from 1 square hollow pipe and angel of S.S.

304 quality material. The racks are mounted on four

heavy duty 4, dia castors for easy handling and quiet

transportation. Complete with argon arc joints and

mirror finish. Available to hold 24 animal cages of

size: 29X22X14 cms. (LXBXH). Rack size: 39X12X60

(LXBXH).

43 Dissect

ion

Instru

ments

Sets containing surgical standard scissors-2, curved

scissors-2, pointed scissors-2, artery forceps-2,

Mosquito artery forceps-2, scalpel handle-2, plain

forceps-2, toothed forceps-2, small retractors-2 etc.

Probes-2, hooks-2,. To be supplied with proper cover

and box.

44 Frog

Boards ____________________

45 Stop

watche

s

Digital – Digital Stop Watch, Digital Stop Watch is

perfect for any laboratory applications. The large LED

display, high resolution enhances the functionality in

several of situations. These are available in two

ranges as per specification. Range 1:99:59:59


Hrs:Min:Sec. Resolution: 1 sec (for range 1)

Min:Sec:Milisec. Range 2:99:59:99 Hrs: Min: Sec

Resolution: 10milisec (for range 2) Display: 6 digit

LED Display Alarm: Buzzer after set time.

46 Chemic

al

balance

-

ordinar

y

apothe

cary’s

Best quality with divided doors show case, capacity

250 gms. Sensivity 1-2 mgm having all stone agates

fitted in open graduated beam

47 Pill

tiles

______________

48 Porceli

n

dishes

______________

49 Pestle

and

Morter

______________

50 Iron

spatula

______________

51 Horn

spatula

______________

52 Galli

pot/oi

ntment

______________


pot

53 Glass

rods

______________

54 Plethys

mograp

h

assorte

d

High Resolution Volume.

Resolution: 0.01 ml, Accuracy+/-0.01ml. Easy to use pedal switch. LCD Graphic Display

55 Antihis

tamine

chamb

er with

manom

eter

Should be a complete Histamine aerosol apparatus

having a acrylic box with nebulizer

sphygmomanometer and chloroform bellows for assay

of antihistamine drugs on guinea-pig etc.

56 Actoph

otomet

er

(activit

y cage)

The frame is equipped with 32 infrared photocells, 16

placed in axis X and 16 placed in axis Y. The

Photocell work at a wavelength of 950 nm and its

information is multiplexed at a rate of 40Hz. Hole

board plate is provided with 16 holes of diameter and

detection depth. It should contain incorporated

electric facility (variable) 0 to 100 volts for activating

rats and indicating on meter.cm

57 Rotaro

d

Assemb

ly

Should have 5 chambers, 75 mm width each with a rotating rod of 25mm diameter having speeds of 5.10

to 15.20 and 25 r.p.m.

Digital rpm indicator and digital time counters.

Each counter runs from the beginning of the test until the animal falls from the drum to the lane.


Electronic change of speed from 4-120 rpm.

58 Electro

convul

siomet

er

Should be able to use for producing minimal and

supra minimal seizures required for assaying of anti-

epileptic and anticonvulsant drugs. Should provide

minimum 50Hz stimulus current which can be

adjusted 0.15mA to 330mA in steps, with one pain

corneal electrode 4,6 or 8mm cups. And one pair of

ear clips work on 220 AC. Should contain electronic

timer device from 0.1 to 3 seconds in steps to control

the stimulus current and LED indicator for duration of

stimulus.

59 Analge

siomet

er

Thick pure aluminum plate (12mm) provides a

very high temperature stability and even surface distribution.

Plate temperature can be held at a set point

between above ambient to 70 degree C (+/-0.2 degree C).

A built-in timer activated by an external foot switch allows the precise measurement of the

reaction time (0.1 sec resolution).

Remote foot-switch controls the test start/stop

allowing rapid Hands-free experiments. Provided with the calibration certificate of the



60 Cooke’

s pole

climbin

g

apparat

us

Should be having 2 (two) chambers, an outer chamber

made of thick plywood sheet with an observation

window and inner animal chamber made of clear

acrylic sheet with a brass bar at the bottom. A built

in shock of 200V AC, 50 Hz single phase with min of

0.2mA and is to be controlled by min of 11 position

solid state timer up to 30 seconds. Should be having

output terminal for kymograph recorder. Animal

dropping tray to be provided to keep the equipment

clean.

61 Metabo

lic cage

(diureti

c

study)

Classic metabolic cages with electronics to monitor the

receptacles for food and water. Each may be removed

without disturbing the animal. Optional infrared

beam arrays (similar to those of the Activity Cages)

can be mounted on either side of the cage to monitor

coordinate activity and rearing behavious. Each cage

is comprised of interchangeable parts which can be

cleaned in a standard vivarium wash station.

62 Tablet

Disinte

gration

machin

e glass

tubing

(length

of 6ft)

Hooper diameter of minimum 2”. Should be fitted

with min 4 steel hammers fixed to a disc and Shaft

being revolved at the speed of 3000 RPM. Rotation in

vertical manner is made by EHP Motor which carries a

specially designed Basket to hold 6 nos. of

Tablets/Capsules under specified weight, moving

vertically in temperature controlled glass

vessels/Beakers placed on Hot Plate. Having special

type of starter facility operatable on 220 volts AC

supply.


SL. NO. NAME OF





Unit Cost For each

item

Expected life of

the equipme

nt

CMC rates for



1 Monitor for Continuous Measurement of Cardiac Function


1. It should be arterial line based continuous monitoring device

for Cardiac output, Cardiac Index, Systemic Vascular Resistance

and Stroke Volume.

2. It must be supplied with good quality display device and ten

Flotrac and necessary catheter system.

3. The device should be compatible with Flotrac sensor system

4. Necessary accessories should be supplied for systemic vascular

resistance measurement




1. It should be auto-calibration based arterial-venous line based

measuring device to provide continuous measurement of

ScVO2, SvO2 , Extra vascular Lung water index and Ejection

fraction as well as End Diastolic volume of heart

2. The monitor should be supplied with 10 (ten) relevant and

related sensors for measurement of hemodynamic variables


3. Suitable display and storage device for data should be supplied



D. Instant Hand held blood pH and Lactate monitor: 1. Portable, cartridge based hand held device capable of

measuring blood pH, Lactate and other variables such as

Troponin, Ionised Calcium, Prothrombine Time, Creatinine

Kinase-MB and Brain Natriuretic Peptide

2. Measurements should be quantitative in nature

3. It should be supplied with wireless based printer and electronic

simulator for calibration



E. Lumber Puncture Simulator with Epidural block trainer: 1. The device should be a 3D image guided one suitable for

training of epidural needle insertion

2. It should be based on real time motion picture based capturing

system with display of procedure on screen

3. The system should be capable of evaluation of trainee’s

performance

4. All relevant interfaces and accessories should be supplied with

the simulator


5 Spinal Injection Trainer

F. Spinal Injection Trainer: 1. Mounted trainer should be able to be used multiple times

2. It should be supplied with three sets of accessories like fluid


bags and simulators

3. One vertebrae must be visible for proper identification of

performance site

4. Trainee should be able to be guided by perceptible tissue

resistance while going through different levels of tissues


6 Central

Venous Catheter Simulator

G. Central Venous Catheter Simulator: 1. Simulator should have life like anatomical structures for

identification of parts related to central venous catheter

insertion

2. It should allow trochar and guide wire insertion for complete

training

3. Device should be supplied with five replaceable skin pads for

each site of training

4. It should be supplied with all accessories like artificial blood

(two units), fluids, spare vessels (two numbers), battery and

other relevant items

5. Facility to check correct position of catheter placement should

be there



H. Cricotracheotomy trainer: 1. It should be able to train routine as well as percutaneous

tracheotomy procedure

2. It should have easily palpable anatomical land marks for


identification of structures

3. Trainer must be steady in nature and should be supplied with

five sets of spare skin for cricotracheotomy


8 Peripheral

Nerve Stimulator/ Locator

I. Peripheral Nerve Stimulator/ Locator: 1. The device should be able to locate nerves percutaneously

through electrical stimulation based technique

2. It should be able to be used with monopolar as well as bipolar

based stimulation technology

3. Current intensity preferably be between 0 to 60 mA and

stimulating impulse upto 1ms

4. Should be able to measure and display actual current passing

through tissues

5. It must be supplied with insulated cannula , ten in number

each for size 22, 24 & 25 G as well as re-chargble battery and

charger.

6. Needle quality should be able to give best image under

ultrasound guided procedures


9 Multi-frequency based deep heat generator

J. Multi-frequency based deep heat generator: 1. Equipment should be multi-frequency based dual outlet

heat generator using long waves with a emission frequency range between 450 to 500 KHz

2. It must have coupling system of capacitive and resistive therapy system for heat generation at different depth of


application area

3. Electrode pairs and handle tips with various diameters such as 30,50 and 70 mm must be supplied with the equipment




K. Airway management Trainer: 1. Trainer must have good quality land marks of upper airway

and pulmonary structures for proper identification during intubation training.






1. It should be able to be applied to patients of all age groups and

necessary probes/accessories to be supplied in two in numbers

for each age group

2. It should work even in low perfusion status and should be least

interfered by electrical disturbances

3. It should be able to provide pulse variability index, blood

hemoglobin and methemoglobin level non-invasively on

continuous as well as point of care basis

4. Perfusion index should be between o.o2 to 20%


5. Waveforms and/or digital display mode of presentation


12 NUCLEO

PLASTY SYSTEM

1. It should work on principle of Co-ablation

2. It should work through generation of bipolar

Radiofrequency without requiring grounding

3. Terminal end temperature generation must not be

above 70 degree C

4. It should be capable of being used in both Lumber

and Cervical region

5. Supplied probe must have depth penetration marks

and stop lock for safety and control.

6. It must be supplied with 17G (6 inch) and 19G (3inch)

accessory needles, 5 needles of each size.

Respective size Probe also to be supplied.


SL.


& INSTRUMENT




Unit Cost For each

item


t




1 Clinical thermometer Traditional type

2 Stykar autopsy saw

with accessories Light weight equipment, 10 feet cord with hospital grade plug -should cut bone easily to minimise operator fatigue - Saw should be attached to HEPA bone dust collector.


SL.


& INSTRUMENT




Unit Cost For each

item


t


next 5 consecutive

years


1 Horrock’s

Apparatus

(Complete set

with chemicals &

Manual)

_____________________


DEPARTMENT OF HUMAN PHYSIOLOGY SL.

NO. NAME OF





Unit Cost For each

item

Expected life of

the equipm

ent


next 5 consecutive

years



Total 526 items

Sub: Invitation of RE-E-tender for procurement of Medical...

Documents

Transcript of Sub: Invitation of RE-E-tender for procurement of Medical...