su proveedor de instrumentos para control de calidad ...
Transcript of su proveedor de instrumentos para control de calidad ...
Measure Coating Thickness Early in Your Process
CoatMaster
140 µm coating thickness
5 – 50 cm measurement distance
Powder Coated Parts – before or after curing
Thermal Spray Coatings
Painted Parts – before or after drying
Applications
Process Control – Detect and correct process deviations in real-time
Material Savings – Save up to 30% in material costs
Quality Improvement – Reduce coating defects and improve part quality
Benefits
su proveedor de instrumentos para control de calidad
CoatMaster
su proveedor de instrumentos para control de calidad www.neurtek.com Rev.00 / Pág. 1
NEURTEK Tlf. 902 42 00 8 2
Inspect Without Touching – Our patented Advanced Thermal Optics (ATO) technology allows you to inspect the coating thickness of parts remotely, from a distance of 5 – 50 cm.
Inspect Parts in All Colors – Easily measure the thickness of all colors of coatings, with or without calibration, depending on your accuracy and process requirements.
Inspect Complex, Curved Shaped Parts – Find all coating defects, even in small, hard-to-reach areas of a part, on curved or inner surfaces and in corners.
Inspect In-Line in Real-Time – Instantly measure the coating thickness of parts as they move along your coating line, with real-time feedback for process control.
Inspect Parts Early in Your Process – You can even inspect parts that are coated with uncured powder coating or wet paint, for quality control at the earliest stages.
Inspect More Materials – Measure the thickness of coatings on the widest range of substrates: metal, wood, ceramics, plastic, CFRP, glass, etc.
Courtesy of AkzoNobel
Courtesy of Wagner
su proveedor de instrumentos para control de calidad
CoatMaster
su proveedor de instrumentos para control de calidad www.neurtek.com NEURTEK Tlf. 902 42 00 8 2
Rev.00 / Pág. 2