Study on modern Blow room line

TOPIC

Presenters

Southeast University Department Of Textile Engineering

I/A 251,252 Tejgaon Dhaka Bangladesh

Prepared By : Mazadul Hasan sheshirID: 201000040000813th Batch Wet Processing Technology Email: mazadulhasan@yahoo.comSoutheast University

A product of substantial length & relatively small cross-section consisting of fibres or filaments with or without twist for produce fabric. By the technology of manufacturing yarn is known Yarn Manufacturing Technology.

In the technology there are some part- Blow room CardingDrawingSimplexRing-spinningWinding

Introduction

1. Bale Breaker2. Mono Cylinder3. Dual Cylinder4. Dedusting unit15. Step Cleaner6. Porcupine Opener17. Dedusting unit28. Porcupine Opener29. Dedusting unit 310. Scutcher

Reference : New Meghna Textile Mills Ltd.

Blow room

A British textile machinery Company.

Crosrol has introduced a completely new range of cotton blowroom

Crosrol

Crosrol- Blow Room line (Modern)

ABO - Automatic Bale Opener

the simplest solution to bale opening; capable of processing up to 4 different material assortments simultaneously.

 Cutting head widths of 1.7M & 2.3M together with un-restricted track lengths enable uses to lay down as many as 200 bales on each side. production rates of up to 1500Kg per hour 

Designed to take advantage of the exceptionally efficient Bale-opening of the Crosrol ABO the Crosrol Pre-Cleaner (CPC) through its unique “single sheet” material processing technique gives not only exceptional Cleaning but also maximum fibre yield with minimal Nep generation when compared to other first stage cleaners currently available.

With multi-blend processing capabilities together with a production rate of up to 2000Kg per hour multiple opening lines can be fed from a single unit.

Crosrol Pre-Cleaner - Unique first-stage Cleaning Technology

Crosrol Blending Opener – Unique Blending Power The Crosrol range of Opening

Blenders with Four & Six chambers.

Blending power in comparison with conventional serial-fill blenders.

the Crosrol Fine cleaner significantly reduces the negative side effects familiar with multi-roll intensive cleaners

This together with a wide range of both Pinned

very high production rates up to 750Kg’s per hour.

Crosrol Fine Cleaner – Precision Cleaning with Optimum Control

Unique principle for the removal of Micro dust and Nep from the Cotton fibre

Rotating disc transfers the fibres through Negative & positive pressure quadrants.

Minimal moving parts ensure simple operating with ultimate reliability.

Insensitivity to pressure differentials negate the need for additional pressure controlling fans thus significantly reducing power consumption.

CDR-Crosrol Dust Remover

Halifax during the past 40 years. Original spare parts manufacturing is undertaken at Crosrol UK’s modern machine facilities in Bradford.The complete range of parts is available for all the machines

A range of performance packs designed to improve the productivity of existing Crosrol cards and blowroom installations.

Mechanical parts include: Aluminium plates Crosrol underscreens Flats (stationary and revolving) Pinned rollers All mechanical parts, belts, gears, coilers and reduction gearboxes. Card wire Filters and fans Electrical components

Advantage