Structure of the Safety Instructions

5
1.1 Structure of the safety instructions 1.1.1 Safety alert symbol 1.1.2 Signal words of safety messages WARNING CAUTION 1.1.3 Structure of section safety messages Section safety messages provide safety information that pertains to the topic of a particular section, but they are not related to any particular procedural step or message in the section. These instructions have the following structure: Signal Word 1.1.4 Structure of embedded safety messages Embedded safety messages provide safety information within procedures. These instructions have the following structure: SIGNAL WORD! CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this Type and source of the hazard. Possible consequences of failure to observe the safety instructions. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

description

blah

Transcript of Structure of the Safety Instructions

Page 1: Structure of the Safety Instructions

NOTICE

1.1 Structure of the safety instructions

1.1.1 Safety alert symbol

1.1.2 Signal words of safety messages

WARNING

CAUTION

1.1.3 Structure of section safety messages

Section safety messages provide safety information that pertains to the topic of a particular section, but they are not related to any particular procedural step or message in the section.

These instructions have the following structure:

Signal Word

1.1.4 Structure of embedded safety messages

Embedded safety messages provide safety information within procedures.

These instructions have the following structure:

SIGNAL WORD!Type and source of the hazard.Possible consequences of failure to observe the safety instructions.Measures for hazard avoidance.

1.1.5 Signal word of property damage messages

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE indicates a situation which, if not avoided, could result in property damage.

This is the safety alert symbol.It is used to alert you to potential personal injury hazards.Obey all safety messages that follow this symbol to avoid possible injury or death.

Type and source of the hazard.Possible consequences of failure to observe the safety instructions. Measure for hazard avoidance. Measure for hazard avoidance.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Page 2: Structure of the Safety Instructions
Page 3: Structure of the Safety Instructions

1.2 Abbreviations, emphases, text representations

NOTE Important information or tips to make work easier, not relevant to safety

Displayed text Display at the operating panel

List of hazard avoidance measures in safety instructions

Identifies a handling instruction

List of fault and status messages on the display

Page 4: Structure of the Safety Instructions

2 Important Safety Information

2.1 Designated use of the machine

The designated use of the emulsifier is the reduction in size of chopped or minced meat (e.g., for the production of scalded sausages), cheese, vegetables or fruits, and the manufacture of sauces.

No more than 130 liters of product should be placed in the emulsifier's inlet funnel.

The emulsifier may only be used in covered production facilities in the food trade and the food industry, at ambient temperatures of between 0°C and +40°C.

The machine is not suitable for operation in environments where there is a risk of fire or of explosion.

WARNING

The operator bears the full responsibility for any damage that arises from non-designated use, and the manufacturer accepts no liability.

WARNING

2.2 Essential personnel qualifications

WARNING

Non-designated use of the machine.Risk of accidents leading to serious injuries or death. Do not operate the emulsifier in areas that are not

intended for this purpose. Do not use the emulsifier to emulsify unsuitable products. Do not use the emulsifier to process a larger quantity of

product than intended.

Unauthorised modifications to the construction or fittings on the machine.Risk of accidents leading to serious injuries or death. Never modify the construction or fittings on the machine.

Contact INOTEC GmbH if any modifications to the construction or fittings on the machine are necessary.

Never operate the machine when safety equipment has been removed.See Sect. Error: Reference source not found for safety equipment.

Inadequate personnel qualifications.Risk of accidents leading to serious injuries or death. Only persons with the following qualifications may work at

the emulsifier.