STRUCTURAL SECTIONS FOR OFFSHORE & ONSHORE …
Transcript of STRUCTURAL SECTIONS FOR OFFSHORE & ONSHORE …
STOCK LOCATION PRINCIPAL STOCK SPECIFICATIONS
STRUCTURAL SECTIONSFOR OFFSHORE & ONSHORE APPLICATIONEdgen Murray is a leading supplier of structural sections for both offshore and onshore application throughout the world. This is from either a direct stock supply route or a back-to-back mill route, or indeed a combination of both. A full range of products and sizes is available through various extensive stocks in UK Imperial, Euronorm, American and Australian dimensions.
United Kingdom
United Arab Emirates
Singapore
Azerbaijan
Holland
Imperial, Euronorm
Imperial, Euronorm
Imperial, Australian
Imperial, Euronorm
Euronorm
Beam, Column, Channel, Angle, Flats, Rounds, Squares
Beam, Column, Channel, Angle, Flats
Beam, Column
Beam, Column, Channel, Angle, Flats
Beam, Column, Channel
STOCK LOCATION DIMENSIONAL DESIGNATION PRODUCTS
The principal material specifications held by location are as follows. Additional Grades may also be available from stock and certainly through our mill
contacts. As always please refer your enquiries to your normal contact at all times.
United Kingdom
United Arab Emirates
Singapore
Azerbaijan
Holland
BS 4360 1986 50DEN 10025 S355J2+ARBS 7191 1989 355DBS 7191 1989 355EMEN 10225 S355G4+MEN 10225 S355G12+MEN 10025 S275JREN 10025 S355JRAS/NZS 3679.1 300AS/NZS 3679.1-350EN 10025 S355J2EN 10025 S355K2BS 7191 1989 355DBS 7191 1989 355EMEN 10225 S355G4EN 10225 S355J2+AREN 10225 S355G11+M
Imperial
Euronorm
American
Australian
BeamColumnChannelAngleFlatIPE (Beam & Column)HEA (Beam & Column)HEB (Beam & Column)HEM (Beam & Column)UPN (Channel)AngleW (Beam & Column)C (Channel)BeamColumn
127 x 76 x 13 - 914 x 419 x 388152 x 152 x 23 - 356 x 406 x 393 100 x 50 x 10 - 430 x 100 x 6440 X 40 X 4 - 200 x 200 x 2450 x 5 - 150 x 1580 - 600100 - 1000100 - 1000100 - 100080 - 40040 X 40 X 4 - 200 x 200 x 24W100 x 100 - W1100 x 400 C100 x 8 - C380 x 74150 - 610 100 - 310
DIMENSIONAL DESIGNATION PRODUCT SIZE RANGE
STRUCTURAL SECTIONSFOR OFFSHORE & ONSHORE APPLICATION
For all of your requirements and further information, please speak with your usual point of contact.
Edgen Murray holds as stock the full dimensional range of each Dimensional Designation.
Please call us for full details of each individual size held. In addition, reference should also be made to the applicable standards for their size coverage. However as a guide the following applies. Additional sizes are available through our mill routes of supply and again you should speak with your normal contact for details.
Reference should be made to the appropriate Dimensional Designation Tables for individual weight factors.
www.edgenmurray.comAmericas: +1.713.268.7200
APAC: +65.6223.3334EMEA: +44.131.333.3333