Strength of Materials - ITUweb.itu.edu.tr/haluk/som/strength_of_materials_week1… · ·...
Transcript of Strength of Materials - ITUweb.itu.edu.tr/haluk/som/strength_of_materials_week1… · ·...
Betonarme Yapılar
Dr. Haluk SesigürI.T.U. Faculty of Architecture
Structural and Earthquake Engineering WG
Strength of Materials
Introduction, Mechanical Properties
of Materials
INTRODUCTION
Reference Books
Mechanics of Materials, SI Edition, 9/E
Russell C. Hibbeler
©2014 • Prentice Hall • Paper, 866 pp
Copyright © 2010 Pearson
Education South Asia Pte Ltd
2
INTRODUCTION
Other References:
Karataş, H Mukavemet 1986 Çağlayan
Copyright © 2010 Pearson
Education South Asia Pte Ltd
3
INTRODUCTION
Course plan:
Strength of Materials
1 Midterm + Final Exam
Theory and Application
4
5
Course Syllabus
Internal forces.
Stress.
Strain.
Tension and compression.
Shear.
Torsion.
Bending moment.
Combined bending and shear.
Combined bending and axial force.
Buckling.
WHAT IS MECHANICS?
Study of what happens to a “thing” (the technical name is
“BODY”) when FORCES are applied to it.
Either the body or the forces can be large or small.
Copyright © 2010 Pearson
Education South Asia Pte Ltd
6
Copyright © 2010 Pearson
Education South Asia Pte Ltd
Mechanics
• Mechanics can be divided into 3 branches:
- Rigid-body Mechanics
- Deformable-body Mechanics
- Fluid Mechanics
• Rigid-body Mechanics deals with
- Statics
- Dynamics
7
TENSION AND COMPRESSION TEST
Copyright ©2014 Pearson Education, All Rights Reserved
APPLICATIONS
Copyright ©2014 Pearson Education, All Rights Reserved
APPLICATIONS (cont)
Copyright ©2014 Pearson Education, All Rights Reserved
STRESS STRAIN DIAGRAM
• Note the critical status for strength specification
proportional limit
elastic limit
yield stress
ultimate stress
fracture stress
Copyright ©2014 Pearson Education, All Rights Reserved
STRENGTH PARAMETERS
• Modulus of elasticity (Hooke’s Law)
• Modulus of Resistance
• Modulus of Toughness
– It measures the enter area
under the stress-strain diagram
E
Eu
pl
plplr
2
2
1
2
1
Copyright ©2014 Pearson Education, All Rights Reserved
(initial slope)
POISSON’s RATIO
long
latv
Copyright ©2014 Pearson Education, All Rights Reserved
SHEAR STRESS-STRAIN DIAGRAM
• Strength parameter G – Shear modulus of elasticity or the
modules of rigidity
• G is related to the modulus of elasticity E and Poisson’s
ratio v.
G
v
EG
12
Copyright ©2014 Pearson Education, All Rights Reserved