CBM3INSTRUCTION

MANUALSTRAPLESS BAG

CONNECTION

The strapless bag connectors allow you to attach your CBM3 buggy simply and securely without the need for straps. The kit contains: Hook, foot and insert. (fig 45).

Slide insert into foot as indicated. (fig 45).

Fit the hook to the rear rim of your bag by sliding it on firmly, ensuring it is located centrally. (figs 46 & 47).

Strapless bag connection.For Concourse bags.

Fig. 45 Strapless bag connection parts

Fig. 48 Insert and foot Fig. 49 Insert in place

Fig. 46 Fitting hook Fig. 47 Hook in place

Foot

Hook

Insert

Locate the locking pins on the base of the buggy (fig 50). Slide the foot onto the pins until it clicks into place firmly (fig 51).

Looking at the base of the bag, you’ll see a special insert hub. This is where the insert on the foot of your CBM3 will fit, ensuring a perfect fit between bag and buggy (fig 52).

With the CBM3 in an upright position, place the bag onto the foot so that the insert fits into the hub on the base of the bag (fig 53).

Fig. 50 Foot locking pins

Fig. 53 Placing bag onto foot

Fig. 52 Insert hub on base of bag

Fig. 51 Foot secured in place

Locking pins

Insert hub

With the locking lever in the open position (fig 54) apply pressure to buggy towards the bag, and the locking lever will automatically begin to lock. Then push down on lever to lock fully (fig 55).

Your buggy is fitted and ready to unfold (fig 56).

Fig. 54 Locking lever open Fig. 55 Buggy secured to hook

Fig. 56 Buggy fitted to bag

Locking lever

Locking lever

Apply pressure

Fig. 57 Release locking lever

Fig. 59 Place bag on foot

Fig. 58 Separate buggy from bag

Fig. 60 Refitting to bag

Locking lever

Separating from your bag.Unlock the mobiliser by lifting up the locking lever near the hook (fig 57). Hold the buggy in a stable upright position and push the top of your golf bag away from the buggy (fig 58).To refit the buggy to the bag, simply place bag back onto the foot (fig 59) and then bring the mobiliser up to meet the hook and push down on the mobiliser locking lever (fig 60).

The strapless bag connectors allow you to attach your CBM3 buggy simply and securely without the need for straps. The kit contains: Hook, foot and base plate. (fig 61).

Fit base plate and foot together as shown (fig 65).

Fit the hook to the rear rim of your bag by sliding it on firmly, ensuring it is located centrally. (figs 62 & 63).

Strapless bag connection.For non-Concourse bags.

Fig. 61 Strapless bag connection parts

Fig. 64 Base plate Fig. 65 Base plate and foot together

Fig. 62 Fitting hook Fig. 63 Hook in place

Foot

Hook

Base plate

Turn bag upside down, and position base plate and foot to the rear of your bag base, ensuring the foot is snug against the base rim. (fig 66).

Mark the position of the base plate on the base of your bag, before securing in place with double sided tape (fig 67).

For remaining steps, refer to figures 50 to 56 on the previous pages.

Fig. 66 Base plate and foot positioned correctly

Fig. 67 Base plate secured with double sided tape

To see the CBM3 in action visit concoursegolf.com