The assembly guideline for charcoal stoves

Presentation of pieces

Presentation of pieces : Part 1

The two symetrics sides with handles

The front (Up part)

The front (Bottom part)

Bottom partBack part

12

3

45

Presentation of pieces : Part 2

The …? The …? The …?

Ceramic wool for front

Ceramic wool The…?

67 8

9

10

11

Presentation of pieces

The doors!

12

13 Prakti Design sign

The tools you need

The tools you need

Rivet gun

17

16

15

14

Rivet

Screw

The key screw ?

How to assembly a charcoal stove step

by step

Step 1 : Sides and front

Put in place the two sides ( ) : handles must be on the outside

Take the front part ( up part ) , the raised edge directed to the bottom and the holes in front of those of the two sides

1

2

Step 1 : Sides and front

Step 1 : Sides and front

Put 4 rivets in the 4 holes ( ) : the long part of the rivet must be directed towards you

Take rivet gun( ) to fix the rivets

15

14

Step 1 : Sides and front

As you have done previously for the up part, put 4 rivets in the 4 holes ( ) and use the rivet gun to fix it

15

Put in place the second piece of the front( the bottom part )3

Step 2 : The back

Turn it to have the back in front of you. Take the back part ( ) and put it in place4

Be careful, this .?. Must be directed to the top of the stove.

Step 2 : The back

Then you can fix the rivets in the holes as you have previously done

Step 3 : The bottomTo fix the bottom part, first turn the stoves to have the handles low.

Take the bottom part ( ) and put it in place.

Then, fix it with rivets.

5

Step 4 : The combustion chamber

Take the ..?. ( )

Put it in place inside the stove : the rounded side must be in front of the back side

6

Be careful to the two holes are facing…..? Then put a screw ( ) into

the hole and fix it with the key ( )

16

17

Step 4 : The combustion chamber

Take the ..?.. ( )and put it in place : the side with round print must be turn to the top like in the photo

7

Step 4 : The combustion chamber

Step 4 : The combustion chamber

Take the ..?.. ( )and put it down8

Step 5 : Isolation

Take the big part of ceramic wool ( )and set it up around the combustion chamber.

Then take the little part of ceramic wool ( ) )And put it in place in the front of the stove

9

10

Step 6 : The …?

Take the ..?.. ( )and put it in place.

Put 4 screw into the holes and use the key to fix it.

11

Step 7 : The doors of the combustion chamber

Put the doors ( ) in the sliding.

Fix it with the rivet gun.

12

Step 8 : The Prakti design sign

Fix th Prakti Sign ( ) in the sliding13

The charcoal stove is ready to use!