store fixture systems

2012

www.panelplus.co

STORE FIXTURE SYSTEMS

pgs. 131-184

CStore Fixture System

s1” Square Aluminum

Tubing & Fitting SystemBrackets &

Standards (Single & Double Slotted),

Bracketspgs. 170-173

pg. 169

Cable Shelving & Signage Hardware

FOGA® - ExhibitBuilding System

pgs. 156-168• Acrylic Sign Holders, Shelves & Display Cube - pg. 137• Ceiling Mount Signage Kit - pg. 134• Channel Mount Ceiling Kit - pg. 136• Channel Mount Floor To Ceiling Set - pg. 136• Floor To Ceiling Kit - pg. 134• LED Crystal Light Box - pg. 141• LED Light w/ Rod - pg. 140• Wall To Floor Kit - pg. 133• Wall To Wall Kit - pg. 133

Slatwall• Accessories / Hardware • Arms - pgs. 148-149 • Baskets - pg. 150 • Bins, Holders, Shelves & Trays - pg. 151 • Brackets - pg. 148 • Hooks - pg. 149• Sheets • Metal - pg. 144 • Plastic - pgs. 142-143, 145 • Textured - pg. 147 • Wood - pg. 146

KLEM® - PanelConnecting

Systempgs. 154-155

Plastic Chain & Accessories

pg. 178

SignageChannel Mount Cable System

pgs. 138-139

Stanchions & Ropes• Merchandising System - pgs. 182-183• Metal - pgs. 180-181• Plastic - pgs. 179, 184• Ropes - pg. 180• Wood - pgs. 174-177

Gridwall & Accessories

pgs. 152-153

Standoff Wall Sign Kit

pg. 139

C-131

Design Conceptsfor Cable Shelving

& Signage Hardware

Acrylic&

GlassSign

Holder

Acrylic &Glass Shelves

C-132

C-133

Wall to Floor Kits

1

2

3

4

1

2

3

Top Fixing (1)

6”or 8”Shelf Stabilizer (2)

Bottom Fixing (1)

13 Ft. Cable (1)

BottomFixing (1)

Top Fixing (1)

13 Ft. Cable (1)

BottomFixing (1)

Top Fixing (1)

1

2

3

4

1

13 Ft. Cable (1)

Note: 2 Sets needed for single unit display

Top Fixing (1)

BottomFixing (2)

13 Ft. Cable (1)

6”or 8”Shelf Stabilizer (1)

Shelf Kit Includes:

Sign & Shelf Clamps sold separately, see page 135

2

• Solid Brass Construction available in: Polished Chrome (PC*) and Satin Chrome (SC*)

• Load Rating 44 lbs. per shelf when mounted properly

• 2 Kit options to choose from – Shelf Kit or Sign Kit• 304 grade stainless steel cable - 1/8” thick

3

Product Features

Note: 2 Sets needed for single unit display

Wall to Wall Kits

Sign Kit Includes:

Shelf Kit Includes: Sign Kit Includes:

Sign Kit

Sign Kit

Shelf Kit

Shelf Kit

CSK-WWSH-* CSK-WWGN-*

CSK-WFSH-*

CSK-WFGN-*

CABLE SHELVING & SIGNAGE HARDWARE

C-134

Note: 2 Sets needed for single sign display 4 Sets needed for single shelf display

This kit accommodates both shelving & sign applications

BottomFixing (1)

Top Fixing (1)

13 Ft. Cable (1)

1

2

3

3

2

1

• 2 Kit options to choose from – Shelf Kit or Sign Kit• 304 grade stainless steel cable - 1/8” thick

• Solid Brass Construction available in: Polished Chrome (PC*) and Satin Chrome (SC*)

• Load Rating 44 lbs. per shelf when mounted properly

Floor to Ceiling Kit

Product Features

Kit Includes:

Sign Application Shelf

Application

Ceiling Mount Signage Set Kit

1

2Note: 2 Sets needed for

single sign display

•Loadrating400lbs.persetof2cables.•Holdspanelthicknessupto:5/16”.•304GradeStainlessSteelCable.•1/8”thickCable.

Product Features

Top Fixing (1)

Sign Connector (1)

13 Ft. Cable (1)(sold separately)

Kit Includes:

CSK-FC-*

CSK-CSF-*


SUSPENDED SIGN CABLE

C-135

Works for Wall to Floor and Wall to Wall Shelving applications

Works for Wall to Wall Shelving applications

CSK-WWBF-*

Top fixings

BoTToM fixings CABLE

sHELf sTABiLiZER BAR

UnDERMoUnT sHELf sUppoRT

Solid Brass Construction available in: Polished Chrome (PC*) and Satin Chrome (SC*) • Works with material up to 5/16” thick

VERTiCALsingLE

sign CLAMp

VERTiCALDoUBLE

sign CLAMp

Components

Shelf Clamps

Sign Clamps

AdjuStABle

AdjuStABle

CSK-dSGC-*

HoRiZonTALDoUBLE sign

CLAMp

CSK-SSGC-*

HoRiZonTALsingLE sign

CLAMp

Solid Brass Construction available in: Polished Chrome (PC*) and Satin Chrome (SC*) • Load Rating 44 lbs. per shelf when mounted properly • 304 grade stainless steel cable - 1/8” thick and in 2 lengths

Product Features

Product Features

267 for Screws266 for Toggler® Anchors

Need a fastener & an anchoring solution?

see page

Works for Floor to Ceiling and Suspended Signage applications

Works with Wall to Wall & Wall to Ceiling signage applications & all Floor to Ceiling applications

Works with all Signage applications, Wall to Floor & Floor to Ceiling shelving applications

1/8” thick cable available in 13 ft. & 26 ft.

HoRiZonTALsingLE sHELf CLAMp

HoRiZonTALDoUBLE sHLf CLAMp

Swivel

Straight

Rotates for sign or shelf applications

Set of 3 hex keysM4, M5 & M6

ADjUsTABLE sign/sHELf CLAMps

HEx KEy

CABLE CUTTER

Material: Aluminum

6” oR 8”

Swivel

Straight

• Hole Size: 5/16” - 3/8” (8-10mm)• Slot Size: 1/8” (3.5mm)

7/16” Gap

180ºRotation

CSK-WWtF-* CSK-CStF-* CSK-tF-*

CSK-BF-*

CSK-SSB-* CSK-uM-*

CSK-SSC-* CSK-dSC-*

CSK-dSSC-*

PART #CSK-HeX

PART #CSK-CUTTER

PART #CSK-Adj-*

PART # leNGtHCSK-CABle 13’

CSK-CABLE-26 26’

CSK-CSSC-*

NEW!

opTionAL ACCEssoRiEs

CABLE sHELVing & signAgE HARDWARE

C-136

1

2

Kit Includes:

Top Fixing (1)

Sign Connector (1)

1

2

Kit Includes:

Top Fixing (1)

Bottom Fixing (1)

top ANd bottoM fixiNgS Slide iNto MouNtiNg chANNel with iNcluded toggleS

coMpAtible with our fogA ModulAr exhibitioN

diSplAy SySteM



Channel (1)(sold separately)

Channel (1)(sold separately)

• Cable Load Rating- 400 lbs per set of two cables when mounting properly• Aluminum Channel Load Rating- 110 lbs. over 6’ 6” length when mounted properly.

• Aluminum mounting channel can also be used for floor to ceiling applications • 304 grade stainless steel cable - 1/8” thick• Holds up to 5/16” thick signs.• Solid brass construction available in two finishes.

Product Features

Channel Mount Ceiling Set

.345”

1.378”

.2345” .0787”

.472”

Channel Mount Floor to Ceiling Set

Sign & Shelf Clamps sold separately, see page 135

Picturedcable hardware• CSK-WFSH-6-SC: See Pg. 133 • CSK-WWSH-6-PC: See Pg. 133• CSK-SSC-SC: See Pg. 135• CSK-SSC-PC: See Pg. 135• CSK-CHWF-SC: See above• CSK-ASH-8L: See Pg. 137• CSK-ASH-11L: See Pg. 137• CSK-SSGC-SC: See Pg. 135fogA• Side- #153: See Pg. 161• top- #92: See Pg. 160• base- #194: See Pg. 160

PARt # deSCRIPtIoN FINISH

CSK-CHSF-* ChannelMountSuspendedSignSet

PC*=PolishedChrome

CSK-CHWF-* ChannelMountFloortoCeilingSet

SC*=Satin

Chrome

CSK-CAbLe13’Longx1/8”

Thick304StainlessSteelCable

-

CSK-ALu 6’6”LongAluminumMountingChannel

ClearAnodized

NEW!

CHANNEL MoUNT SIGNAGE SySTEMfoR 3MM DIAMETER CABLE

C-137

(Non-illuminated)ACRYLIC SIGN HoLdeR CLeAR ACRYLIC ANGLed SHeLVeS

CLeAR ACRYLIC FLAt SHeLVeS CLeAR ACRYLIC dISPLAY CubeS

Product Features• 1/4” thick• Polished edges• Adjust angle to your desired specification.

Product Features• 1/8” thick• Polished edges



other Sizes & colors Available, please inquire

works with 3MM cable Sold on page 135

works withhorizontal Sign clamps

See page 135

polished chromeMounting clamps

included

polished chromeMounting clamps

included

* works with cSK-AdJ-* Adjustable Sign clamp

See page 135

PARt #GRAPHIC

SIZeoVeRALL

SIZeCSK-ASH-8P 8-1/2”Wx11”H 9-3/4”Wx11”HCSK-ASH-8L 11”Wx8-1/2”H 12-1/4”Wx8-1/2”HCSK-ASH-11P 11”Wx17”H 12-1/4”Wx17”HCSK-ASH-11L 17”Wx11”H 18-1/4”Wx11”HCSK-ASH-22P 22”Wx28”H 23-1/4”Wx28”HCSK-ASH-22L 28”Wx22”H 29-1/4”Wx22”HCSK-ASH-7P 7”Wx11”H 8-1/4”Wx11”HCSK-ASH-7L 11”Wx17”H 12-1/4”Wx7”H

PARt # oVeRALL SIZeCSK-ASHF-9 9”Wx11-1/2”Lx1”Lip

*Nominal Size

PARt # oVeRALL SIZeCSK-CUBe 12”Wx12”Lx12”D

PARt # oVeRALL SIZeCSK-FSHF-12 12”Dx12”Lx6”HCSK-FSHF-24 12”Dx24”Lx6”H

*Nominal Size

CABLE SHELVING & SIGNAGE HARWAREoPTIoNAL DISPLAy ACCESSoRIES

NEW!

NEW!NEW!

C-138

MATERIAL: ALL STEEL CONSTRUCTION - CABLE & TOGGLE HOOKPRODUCT FEATURES:• Aluminum channel works with both roller and toggle style hooks• Carbon steel hooks in polished chrome finish include 4’ of 2.5mm steel cable• Hooks have push button adjustment along the length of cable• Load rating of 26 lbs. per cable when properly installed

ROLLER STYLE HOOK for side to side adjustment - ceiling application onlyCSK-P45-01

TOGGLE STYLE HOOK for ceiling or wall mount applicationCSK-P45-02

LOOP END HOOKfor use with ceiling hooks (Sold separately, see page 78)CSK-P45-03

ADJUSTABLE TOGGLE STYLE HOOK for ceiling or wall mount applicationCSK-P45-04

CLEAR ANODIZED ALUMINUM MOUNTING CHANNEL 6’6” length

5/16”5/8”3/4”

7/16

”9/

16”

5/16

”

CSK-P-ALU

Ceiling Mount

Wall Mount

Hold down button to

move hook along cable

Twist knob to lock hook

to cable

267 for Screws266 for Toggler® Anchors


see page

NEW!

LIGHT DUTYCHANNEL MOUNT HANGING SYSTEM

C-139

3/4”

3/4”

3/16” or 5/16”

Kit shown with 6” x 6” sign size267 for Screws

266 for Toggler® Anchors


see page

MATERIAL: 1/8” THICK NON-GLARE CLEAR ACRYLIC

PRODUCT FEATURES:• Can be used for both single sided and double sided applications• Comes complete with all hanging hardware: (Pictured below) - 2 10 ft. length chains - 4 S-hooks (1-3/4” long) - 2 sets of ceiling clips (Right & Left)• 3 sizes available

PRODUCT FEATURES:• Complete sign kit includes: - 2 pieces of 1/8” thick pre-drilled acrylic with polished green edges -4standoffs(3/4”diameterx3/4”)inbrushedstainlessfinish - 4 mounting screws• Premium (-P) and Eco (-E) standoff kits available• Available in a variety of sizes for uses ranging from directory signs to name plates

COMPLETE SYSTEMALLOWS YOU TO HANG

SIGNAGE FROM CEILING, MAXIMIZING VISIBILITY!

Pre-drilled holes at top

PART # SIGN SIZE LOCATION OF STANDOFFSSTD-SIGN-63-* 6” W x 3” H 2 holes centered on short side

PREMIUM *(-P)

ECO *(-E)

STD-SIGN-66-* 6” W x 6” H 4 holes in the cornersSTD-SIGN-82-* 8” W x 2” H 2 holes centered on short sideSTD-SIGN-88-* 8” W x 8” H 4 holes in the cornersSTD-SIGN-811-* 8-1/2” W x 11” H 4 holes in the corners

PART # SIZECHS-2228-K 22” W x 28” HCHS-2436-K 24” W x 36” HCHS-3040-K 30” W x 40” H

NEW!

NEW!

HANG IT SIGN SYSTEM

WALL SIGN KITS

C-140

PRODUCT FEATURES:• 180º Rotation of lamp holder• Adjustable• Bulb Included

Lamp Rotates180° on HoLdeR

sLides & adjusts

sLides & adjusts

LiGHtinG speCiFiCations CoLoR tempeRatuRe Beam spRead LuminesCenCe CoLoR

RendeRinGindeX Average

Rated For50,000Hours

COLOR LUMENSWarm White 150Cool White 21060˚

WW=80CW=75

6000K3000K

CoolWhite

WarmWhite

PureWhite

These power supplies work with both the LED Crystal Box and LED MR16D Rod

poWeR suppLiesa B

C

paRt # CoLoR tempWidtH

adjusts FRom# oF Led

CHipstotaL

WattaGeCsK-mR16-100-WW Warm White 5-7/8” to 7-7/8”

3 3WCsK-mR16-100-CW Cool WhiteCsK-mR16-200-WW Warm White 11-13/16” to 15-3/4”CsK-mR16-200-CW Cool White

paRt # desCRiption WattaGe VoLtaGe amps

a CsK-CLB-pW7 2-1/4”L x 1-7/8”W x 7/8”DPower Supply 7.2W 12V .6A

B CsK-CLB-pW18 3-3/8”L x 1-7/8”W x 1-1/8”DPower Supply 18W 12V 1.5A

C CsK-CLB-pW36 4-5/8”L x 2”W x 1-1/4”DPower Supply 36W 12V 3A


LED MR16 RODNEW!

Power Supply

12 Vsign

material: polished Chrome steel

Super BrightLight OutputSuper BrightLight Output

Cool White

General DutyLight OutputGeneral DutyLight Output

Warm White

C-141

Portrait (P *) orLandscape (L*)

available,please specify

PRODUCT FEATURES:• Super Thin Under 3/8”• U-Shaped cut out in top for easy changing of graphics.

EACh FRAME INCLUDES:a) Light Box withB) Cable Connector

AB

Other sizes available, please inquire*

u-shaped Cut out

LiGHtinG speCiFiCations CoLoR tempeRatuRe LuminesCenCe CoLoR

RendeRinGindeX Average

Rated For50,000Hours

COLOR LUMENSCsK-CLB-8-* 186CsK-CLB-11-* 93CsK-CLB-16-* 102CsK-CLB-22-* 121CsK-CLB-24-* 167

CW=70

6100K

CoolWhite

WarmWhite

PureWhite

These power supplies work with both the LED Crystal Box and LED MR16D Rod

poWeR suppLies

Cable Mount hardware Sold Separately,

See Pages 133-137

a B

GRapHiC siZe

ReVeaL dimensions

oVeRaLL dimensions

# oF LedCHips

totaLWattaGepaRt # CoLoR temp

CsK-CLB-8-*

Cool White

8-1/2” x 11” 7-1/2” x 10-11/32” 11” x 13-1/2” 24 1.8WCsK-CLB-11-* 11” x 17” 10-11/32” x 16-3/8” 13-1/2” x 19-1/2” 42 3.6WCsK-CLB-16-* 16” x 20” 15-3/16” x 19-7/32” 18-11/32 x 22-3/8” 56 6WCsK-CLB-22-* 22” x 28” 21-7/32” x 27-3/16” 22-5/32” x 31-1/8” 60 9WCsK-CLB-24-* 24” x 36” 23-7/32 x 35-3/16” 26-1/2” x 38-1/2” 66 11W

paRt # desCRiption WattaGe VoLtaGe amps

a CsK-CLB-pW7 2-1/4”L x 1-7/8”W x 7/8”DPower Supply 7.2W 12V .6A

B CsK-CLB-pW18 3-3/8”L x 1-7/8”W x 1-1/8”DPower Supply 18W 12V 1.5A

C CsK-CLB-pW36 4-5/8”L x 2”W x 1-1/4”DPower Supply 36W 12V 3A


LED CRYSTAL LIGHT BOXNEW!

Power SupplySuper BrightLight OutputSuper BrightLight Output

12 Vsign

material: Clear Vinyl

C-142

13/16” Thick

Center toCenter3”

UNIQUE INTERLOCKING

DESIGN

• 8 ft. Lengths; runs horizontal• Can be screwed, nailed or glued into place• Installed with standard tools• Holds 20 lbs. per sq. ft.• Furniture grade quality• Grooves are pre-finished• Color through material• Free samples available - please inquire

SUPER LIGHTWEIGHT

BUT STRONG!

E-Z SLATWALLWorld’s Best

Looking Slatwall

The 1st 100% Recycled

Slatwall8 FT. LENGTHS

HIGH DENSITY POLYSTYRENE

• 16 sq. ft. per box• 8 pieces per box• 17 lbs. per box• Ships UPS - No crating fee

AVAILABLE IN 8 FINISHES

OIL RUBBED BRONZE

SNOW WHITE

BURNISHED COPPER

STAINLESS STEEL

EBONY / BLACK

WALNUT / CHESTNUT

CHERRY / MAHOGANY

SILVER

FITS ALL STANDARD HOOKS, BASKETS & BRACKETS

Interlocking Slatwall can be mixed/matched with any color combination

See pages 344-349 for Garage Accessories

PART# FINISHEZ-SLAT3-01 Stainless SteelEZ-SLAT3-02 Ebony/BlackEZ-SLAT3-03 Cherry/MahoganyEZ-SLAT3-04 Oil Rubbed BronzeEZ-SLAT3-05 Walnut/ChestnutEZ-SLAT3-06 Burnished CopperEZ-SLAT3-07 Snow WhiteEZ-SLAT3-08 Silver

SLATWALL

C-143

E-Z SLATWALL8 FT. LENGTHS

HIGH DENSITY POLYSTYRENE

For more Slatwall Inserts, see page 146

Mill Finish Slatwall Insert

8’ Long

XtraBond®9500The “Original” Hybrid Formula

XtraBond®9500 is a high performance, one component, permanently flexible, easy to use, multi-purpose fast cure modified polyurethane sealant. XtraBond®9500 cures rapidly when exposed to atmospheric moisture to form a durable bond.• Use as adhesive or filler• Eco-friendly, low VOC’s• Fast cure• Paintable• Non-yellowing

Turn barren walls into moneymaking opportunities.

• Create More Selling Opportunities• Quickly Remodel• Cut With Hand Saw & Screw• Ships UPS

ANYONECAN DO!

WindowDisplay

STAINLESS STEEL

EBONY / BLACK

CHERRY / MAHOGANY (SHOWN)

OIL RUBBED BRONZE

WALNUT / CHESTNUT

BURNISHED COPPER

SNOW WHITE

SILVER

AVAILABLE IN 8 FINISHES

World’s Best Looking Slatwall

PART #ALU710-M

PART #XB-9500

SLATWALL

C-144

DOUBLE SiDED ALUminUm SLAtwALL PAnELS

.450”

.495”

1.500”

ALU7584-m

5/8”

9/16” 1/16”

1/2”

ALU847-S

• CLEAR ANODIZED & MILL FINISH• 1-1/2” ON CENTER • 5”H X 12’ L PANELS

2 SIDED ULTRA THIN

DURABLE & STRONG

• INNOVATIVE DESIGNALLOWS FOR USE OF BOTH

SIDES OF THE PANEL.

TRIPLE FLANGE

For more Aluminum Tubing & Fitting components,

See pages 170-173

END CHANNEL FOR SLATWALL EDGES

PART # FINISHAt-16CL-8 Clear Anodized

Other colors available, minimums apply, please inquire.

PART # FINISH DESCRIPTION PER CTN.ALU7584-m Mill 5” x 12’ Long Slatwall 6 pcs.ALU7584-S Clear Anodized 5” x 12’ Long Slatwall 6 pcs.

Other colors available, minimums apply, please inquire.

PART # FINISH DESCRIPTIONALU847-m Mill 12’ LongALU847-S Clear Anodized 12’ Long

DOUBLE SIDED ALUMINUM SLATWALL PANELS

C-145

WHITE, DOVE GRAY or BLACK3/8” THICK RIGID PVC6” x 48” PANELS - 1” ON CENTER

• Easy To Install• Light Weight Yet Strong• Acid & Alkali Resistant

Unique Interlocking

Design

PLASTIC SLATWALL PANELS

Dove Grey

Black

White

.67”

.89”

.63”.79”

End Cap

1.38”

.67” .83”

1.06”

.06”

Joint Trim

Mouldings

BlackWhiteAlmond

Maple WoodGrain

Product Features• Strong & Durable.• Easy to install with seamless construction.• Color matching screws & mouldings available.

Great Wall Panels

Material: PVCPanel Sizes: 1’ x 4’ or 1’ x 8’

3” on center11/16” Thick Panel

See Pgs. 344-349For GarageHardware

UNIQUE INTERLOCKING

DESIGN

Standard Duty25 Lbs per Sq. Ft. Load Capacity

Heavy Duty100 Lbs per Sq. Ft. Load Capacity

11/16”

PART # COLORSLAT648 White

SLAT648BK BlackSLAT648DG Dove Grey

PANELSPART # DESCRIPTION

GRW-1X4-WH 1’ x 4’ White Great Wall PanelGRW-1X4-BK 1’ x 4’ Black Great Wall PanelGRW-1X4-AL 1’ x 4’ Almond Great Wall PanelGRW-1X4-MP 1’ x 4’ Maple Great Wall PanelGRW-1X8-WH 1’ x 8’ White Great Wall PanelGRW-1X8-BK 1’ x 8’ Black Great Wall PanelGRW-1X8-AL 1’ x 8’ Almond Great Wall PanelGRW-1X8-MP 1’ x 8’ Maple Great Wall Panel

MOULDINGSPART # DESCRIPTION

GRW-JNR8-WH 8’ White Joint Trim For Great WallGRW-JNR8-BK 8’ Black Joint Trim For Great WallGRW-JNR8-AL 8’ Almond Joint Trim For Great WallGRW-JNR8-MP 8’ Maple Joint Trim For Great WallGRW-END8-WH 8’ White End Cap For Great WallGRW-END8-BK 8’ Black End Cap For Great WallGRW-END8-AL 8’ Almond End Cap For Great WallGRW-END8-MP 8’ Maple End Cap For Great Wall

SCREWSPART # DESCRIPTION

GRW-2500SCR-WH 2-1/2”-L White Screw For Great WallGRW-2500SCR-BK 2-1/2”-L Black Screw For Great WallGRW-2500SCR-AL 2-1/2”-L Almond Screw For Great WallGRW-2500SCR-MP 2-1/2”-L Maple Screw For Great Wall

PANELSPART # DESCRIPTION

GRW-HD1X4-WH 1’ x 4’ White Great Wall PanelGRW-HD1X4-BK 1’ x 4’ Black Great Wall PanelGRW-HD1X4-AL 1’ x 4’ Almond Great Wall PanelGRW-HD1X4-MP 1’ x 4’ Maple Great Wall PanelGRW-HD1X8-WH 1’ x 8’ White Great Wall PanelGRW-HD1X8-BK 1’ x 8’ Black Great Wall PanelGRW-HD1X8-AL 1’ x 8’ Almond Great Wall PanelGRW-HD1X8-MP 1’ x 8’ Maple Great Wall Panel

* Must be ordered in full boxes of8 pcs. x 4 ft. or 4pcs. x 8 ft.

* Must be ordered in full carton of 8 pcs. x 4 ft. or4pcs. x 8 ft.- No Broken Cartons.

* Screws packed 100 pcs. per box

LIGHT DUTY SLATWALL PANELS

GREAT WALL SLATWALL SYSTEM

C-146

LOW PRESSURE LAMINATE - 4 FT. x 8 FT. - 3” ON CENTER

with Unfinished Grooves

Mirror

Mahogany PearwoodBrushed Aluminum

White

Almond Hardrock Maple Woodgrain

Fog Gray

Paint GradeOak Woodgrain

T-Metal 8’ Lengths

.53090°

1.272

.330

.328

.408.040

Fits Marlite Brand Slatwall

WOOD SLATWALL PANELS

ALUMINUM INSERT FOR SW48 SLATWALL

VINYL INSERT FOR WOOD SLATWALLFits the SW48 Wood and Marlite Brand Slatwall

ALUMINUM INSERT FOR SLATWALL

8’ Long Length

PART # DESCRIPTIONSW48-WH White LPMSW48-FG Fog Gray LPMSW48-AL Almond LPM

SW48-OAK Oak Woodgrain LPMSW48-MP Maple Woodgrain LPMSW48-PT Paint Grade MDF

SW48-ALU Brushed Aluminum LPLSW48-MAH Mahogany Woodgrain LPLSW48-PE Pearwood Woodgrain LPLSW48-MIR Clear Mirror Acrylic

T-METAL8’L Mill Finish

PART# COLORSLAT-J-BK BlackSLAT-J-WH WhiteSLAT-J-LG Light GraySLAT-J-IV Ivory

ALU710-M8’L Mill Finish

SLATWALL & SLATWALL SYSTEMS

SLATWALL INSERTS

C-147

Paint matChed alUminUm groove inserts

2’ x 8’ sheets have 7 rows of slats

our slat text Panels are a one of a kind innovation for the display market,allowing stores to transform ordinary merchandise setups into a themed decor. they are made from a composite of high density foam and mdf board that are designed to accept slate wall shelving and fixtures.

our 3 dimensional slattex Panels are unrivaled in realism. if you’re looking to break from the traditional laminate slat wall, this is for you.

FEATURES• Made with a polymer plastic surface and

an MDF back.• All grooves are spaced 6” on center.• Custom colors are available upon request.• All panels are reinforced with inserts.• Horizontal configuration only.

Barnwood

white washswP-10 sandstone

BriCk

swP-15 red Brick swP-20 natural

swP-25 white wash

all Panels aPProximately 1” thiCkness

Slatwall accessories available, See pgs. 148-150

Available In: Grey, Beige, & White.Please Inquire.

- Easy to install and expand.- Hi profile dimensional surface- Mulitple “Themed” textures

- Tough, impact resistant surface- Fade resistant colored surface

slate

swP-30 natural swP-35 whitemetal

swP-40 rust swP-45 gray

SLATWALL TEXT PANELS

C-148

Heavy Duty Steel Support Arms are for use with both knife & hangrail brackets on slatwall. 3/8" dia. arm with "U" shaped cup & screws to secure cup to bracket.

HEAVY DUTY SUPPORT ARM FOR SLATWALL

VISION WARE REST

RECTANgULAR DOWN SLANTWITH BALLS

14” Long, with 6 balls

SWIVEL SHOE SHELFWITH TOE STOP

CLEAR POLYCARBONATE ACCESSORIES

CLEAR ROUND SHELF BUMPERS

BRIgHT CHROME ONLY

2-3/4"W x 8-3/4"L - Toe Stop: 1" H

SWIVEL

METAL DISPLAY ARMSHANgRAIL BRACkET WITH RETURN TO FIT

3" O.C. SLATWALLBRIgHT CHROME

STEEL

10” Long, with "O" cup for 1-1/4" diameter tubing

kNIFE BRACkET WOOD SHELF BRACkET

BLACk (Bk), ALMOND (AL), WHITE*(WH)

BLACk (Bk), ALMOND*(AL), WHITE (WH) or

BRIgHT CHROME (BC)

* Almond not available in SW10KB, SW12KB &

SW16KB

*White not available in SW14WB

PART #R21-3

HD/SW-S is recommended for brackets 8"-12" long.

HD/SW-L is recommended for brackets 12" or longer.

PART # SIZE4PkB/SW-CL 4"6PkB/SW-CL 6"8PkB/SW-CL 8"

10PkB/SW-CL 10"12PkB/SW-CL 12"14PkB/SW-CL 14"

PART #BH100CL

PART #P6B/SW-CL

PART #SSH/TSW-CL

PART #SW/RHR12-BC

PART #SW8kB-BCSW8kB-ALSW8kB-BkSW8kB-WHSW10kB-BCSW10kB-BkSW10kB-WHSW12kB-BCSW12kB-WHSW12kB-BkSW14kB-BCSW14kB-ALSW14kB-BkSW14kB-WHSW16kB-BCSW16kB-BkSW16kB-WH

PART #SW10WB-BkSW10WB-ALSW10WB-WHSW14WB-AL

SLATWALL HARDWARE

C-149

METAL DISPLAY ARMS - Black (Bk), White (WH) or Bright Chrome Steel (BC)SqUARE DOWN SLANT WITH BALLS

16” Long, 3/4" square tubular arm with six balls

HOOkS*WHITE (WH), *BLACk (Bk) or

*FASHION gRAY (Fg) gLASS FILLED NYLON

RECTANgULAR DOWN SLANTWITH CUBES

SqUARE DOWN SLANT WITH HOOkS

16” Long, 3/4" square tubular arm with five hooks

RECTANgULAR DOWN SLANTWITH HOOkS

16” Long, 1/2" x 1-1/2" tubular arm with five hooks

SqUARE STRAIgHT OUT

12” Long, 3/4" square tubular arm with ball end stop

RECTANgULAR STRAIgHT OUT

12” Long, 1/2" x 1-1/2" tubular arm with flat end stop

CLEAR POLYCARBONATE HANgERPSW/HF3/8"L

PSW/H15/8"Lw/90°upturn

BRIgHT CHROME METAL HANgER

16” Long, 1/2" x 1-1/2" tubular arm with seven cubes

1/4" DIA. HOOK WITH 30° UPTURN

BRIgHT CHROME METAL

Not available in White

Not available in White

PART #SW/6B-

PART #SW/R7B-BCSW/R7B-Bk

PART #SW/5H-

PART #SW/R5H-

PART #SW/12-

PART #SW/R12-BCSW/R12-BkSW/R12-WH

PART #SW/HF

PART # SIZESW/H1-BC 1"SW/H4-BC 4"SW/H6-BC 6"SW/H8-BC 8"SW/H10-BC 10"SW/H12-BC 12"

PART # SIZESW/H2* 2"SW/H4* 4"SW/H6* 6"SW/H8* 8"SW/H10* 10"

PART #PSW/HFPSW/H1

SLATWALL HARDWARE

C-150

HANgBAR ACCESSORIESBRIgHT CHROME SLATWALL HANgBAR

BLACk, CHROME, WHITE

Adjustable from 26-3/4” to 34-3/4”

SLATWALL SCARECROW

24” long x 12” depthMade with 1-1/4”

round tube

WIRE BASkET ACCESSORIES - Black or White NARROW BASkET

12”W x 6”D x 6”H

SMALL BASkET

12”W x 12”D x 4”H

DEEP BASkET

12”W x 12”D x 8”H

SHALLOW BASkET24”W x 12”D x 4”H

HEAVY DUTY BASkET

CHARCOAL

TICkET HOLDER CLEAR BUTYRATE - 12 FT. LENgTHSFits 1-1/4” Ticket

SIgN HOLDER CLIPFor .060 material

CLEAR BUTYRATE

12 FT. LENgTHS

.392

1.060

.700.165

.625

AVAILABLE IN 1', 2', 4’ OR 8' LENgTHS* Made of Clear Anodized Aluminum

HOLDS UP TO 12" D SHELF x 1/4" OR 3/4" THICk(SCREWS INCLUDED FOR 3/4" THICk ONLY)

EASY AS: 1 - PICK SHELF LENGTH 2 - INSERT SHELF INTO EXTRUSION 3 - HANG ON SLATWALL

12”MAx.

SLATWALL

SHELF BRACKETS

SHELF

1/4” or 3/4”

ALUMINUM SLATWALL SHELF SUPPORT BRACkET

PART #SW/HB-BC

PART # COLORSW/SCW-BC Bright ChromeSW/SCW-Bk BlackSW/SCW-WH White

PART # COLORSWB/12244-Bk BlackSWB/12244-WH White



PART #62-CL

PART # P307-CL

PART # SIZECTN.qTY.

SWB-BSkT-312 3”D x 12”W 6 Pcs.SWB-BSkT-812 8”D x 12”W 4 Pcs.SWB-BSkT-1218 12”D x 18’W 4 Pcs.SWB-BSkT-1224 12”D x 24”W 4 Pcs.

PART # COLORSWB/12128-Bk BlackSWB/12128-WH WhiteSWB/12128-CH Chrome

PART # LENgTH

3/4" THICkSHELF

41790-1 1'41790-2 2'41790-4 4'41790-8 8’

PART # LENgTH1/4"

THICkSHELF

51790-1 1'51790-2 2'51790-4 4'

* THE LENgTH OF THE BRACkET IS 1/4” LESS THAN THE SUggESTED SHELF LENgTH

SLATWALL HARDWARE

SLATWALL ACCESSORIES

C-151

632Z, 9881Z

25% DR CLEAR P.E.T.G.

635Z, 9882Z 634W, 9885W 633W, 9884W

100% DR

“Z” & “W” BarCLEar aCrYLIC - 25% or 100% Dr or CLEar P.E.T.G. - 4 FT. LENGTHS

• MAN MADE IN U.S.A • FLAME POLISHED EDGES • .100 THICK ACRYLIC

PaCKED 12 PCS. PEr CarTON *

CLEar aCrYLIC - nominal 1/8" material **WIDTH aLLOWS CLEaraNCE FOr SIZES SHOWN

LITEraTUrE HOLDErS

PaCKED 6 PCS. PEr CarTON *

CLEar aCrYLIC - nominal 1/8" materialSIGN HOLDErS

SHELVESCLEar aCrYLIC - nominal 1/8"

material

PaCKED 12 PEr CarTON *

PaCKED 6 PEr CarTON *

CLEar aCrYLIC - 3/16" THICK WITH HEaT BENT GUSSETS

FOr EXTra SUPPOrT

SLaTWaLL BINSPerfect for holding merchandise of various sizes on slatwall, made from heavy 3/16” acrylic.

SLaTWaLL CarD raCKS

aCrYLIC SLaTWaLL TraYS

PaCKaGED PrODUCT DISPLaYS

Great for candy, stationery, and other small packaged items.

a B

For our complete line of acrylic products, See pages 108-121

ParT #632Z-4635Z-4633W-4634W-4

ParT #632Z-100-4635Z-100-4633W-100-4634W-100-4

ParT #9881Z-49882Z-49884W-49885W-4

ParT # W x H516-SL 5-1/2” x 7"517-SL 7" x 5-1/2"518-SL 7” x 11"519-SL 11” x 7"520-SL 8-1/2” x 11"521-SL 11” x 8-1/2"522-SL 11” x 14"523-SL 14” x 11"

ParT # WIDTH LENGTH873-SL 8" 24"874-SL 8" 36"878-SL 10" 24"879-SL 10" 36"

ParT # WIDTH HEIGHT662-SL 4" 16"663-SL 4" 20"664-SL 4" 24"665-SL 6" 16"

ParT # W x H47SL-1 3-1/2” x 7"47SL-2 4" x 7"47SL-3 4-7/8" x 7"47SL-5 8-1/2” x 9"

**

ParT # DIMENSIONSaaD-TD-14-SL 4” SquareaaD-TD-15-SL 6” SquareaaD-TD-16-SL 8” SquareaaD-TD-17-SL 10” SquareaaD-TD-18-SL 12” Square

ParT # DIMENSIONSaaD-CD-1-SL 11-3/4”W- Open EndaaD-CD-2-SL 23-3/4”W- Open EndaaD-CD-3-SL 35-3/4”W- Open EndaaD-CD-4-SL 47-3/4”W- Open End

ParT # DIMENSIONSaaD-TD-6-SL 8”W x 4”D x 2”HaaD-TD-7-SL 12”W x 4”D x 2”HaaD-TD-8-SL 12”W x 8”D x 2”HaaD-TD-9-SL 16”W x 8”D x 2”HaaD-TD-10-SL 24”W x 8”D x 2”HaaD-TD-11-SL 12”W x 6”D x 4”HaaD-TD-12-SL 16”W x 8”D x 4”HaaD-TD-13-SL 24”W x 8”D x 4”H

ParT # DIMENSIONSa aaD-TD-19-SL 7-3/4”W x 4-3/4”DB aaD-TD-20-SL 15-1/2”W x 4-3/4”D

SLATWALL HARDWARE

C-152

Bases For Gridwall1/4" steel wire - 3" O.C. Grid.

Vertical sides have double wire.

• NOTE: SHEETS ARE PACKED 2 PER CARTON

Gridwall Hooks

Metal display arMs For Gridwall

USE #12 PANHEAD SCREWS

Bracket Base is 3" W x 3-7/8" HHook is 1" H x 2¾" Projection

3/16" x 1" vertical bar.1/2" x 1-1/2" horizontal tube with 2

adjustable levelers to prevent rocking and 3 nuts & bolts to assure stability.

24"w x 18-1/2"H.levelers included: 3/8" x 1" long.

Note: Casters with same stem will fit into legs.

4 Way Base For Grid Panels Includes Casters

Gridwall panels

steel - 16" lonG

steel - 12" lonG12” roUnd

tUBinG FaCe oUt witH disk

at end

steel

1/2” slots on 1” Centers

7 Ball sqUare

waterFall

roUnd FaCe oUt

reCtanGUlar straiGHt oUt

steel

2” slotted standardBraCket

steel - 17" lonG

5 Hook sqUare

waterFall

2” wall MoUnt BraCketsteel

part # FinisH/Color siZeGw24-BC Bright Chrome 2' W x 4' HGw24-Bk Black 2' W x 4' HGw24-wH White 2' W x 4' HGw25-BC Bright Chrome 2' W x 5' HGw25-Bk Black 2' W x 5' HGw25-wH White 2' W x 5' HGw26-BC Bright Chrome 2' W x 6' HGw26-Bk Black 2' W x 6' HGw26-wH White 2' W x 6' HGw27-BC Bright Chrome 2' W x 7' HGw27-Bk Black 2' W x 7' HGw27-wH White 2' W x 7' H*Gw28-BC Bright Chrome 2' W x 8' H*Gw28-Bk Black 2' W x 8' H*Gw28-wH White 2' W x 8' H

steel - ¼" dia. Gridwall Hookpart # siZe FinisH

Gw/H4-BC 4" Bright Chrome

Gw/H4-Bk 4" Black


Gw/H6-Bk 6" BlackGw/H6-wH 6" White







part # FinisHGw3-BC Bright

ChromeGw3-Bk BlackGw3-wH White

delUxe “t” leGspart # FinisH

Gw/tleG Bright Chrome

Gw/tleG-Bk Black

delUxe “t” leGspart # FinisH

Gw4Ba-BC Bright Chrome

Gw4Ba-Bk Black

part # FinisHGw/s7C-BC Bright

Chrome

part # FinisHGw/r12-BC Bright

Chrome


Chrome


Chrome

part # FinisHGw/r5H-BC Bright

Chrome

GRIDWALL & ACCESSORIES

C-153

wire Baskets & wire sHelves For Gridwall

HandBar aCCessories

(adJ 201/2” - 303/4”)projects 12” out - 2’ long

41/2” H x 8” deep, 3” ring

For securing panels to floor.Clip is 11/16" W x 1" L with 1/4" Dia. Holescrew size: #8 Pan Head Screws

Joins grids for straight or angle position.screw size: ¼-20 x ¾" Long Pan Head Screw

steel

steel

Connects 4 Grip Panels at 90° Angle

Joiners & ConneCtors

Connects 2 Grip Panels at 90° Angle

steel

steel

adJUstaBle Gridwall sCareCrow

part # FinisHGw/t Bright Chrome

FlUsH MoUntinG Clippart # FinisH

Gw1-BC Bright ChromeGw1-Bk BlackGw1-wH White

Joiner Clippart # FinisH

Gw2-BC Bright ChromeGw2-Bk BlackGw2-wH WhiteJoiner Clip

part # FinisHGw/CGw2-BC Bright

ChromeGw/CBlk2-Bk Black

Joiner Clippart # FinisH

Gw/CGw4-BC Bright Chrome

Gw/CBlk4-Bk Black

Hat Holderpart # FinisH

GwHH-Bk BlackGwHH-BC Bright Chrome

U sHaped HanG railpart # FinisH

Gw/kHG681 Bright Chrome

12”w x 6”d x 6” H narrow Basket

part # FinisHGwB1266-BC Bright ChromeGwB1266-Bk Black

12”w x 12”d x 8” H deep Basketpart # FinisH

GwB12128-BC Bright ChromeGwB12128-Bk Black

12”w x 12”d x 4” H sMall Basket


24”w x 12”d x 4” H sHallow Basket


24” w x 5¾” d x 6¾” H video Book sHelFpart # FinisH

Gw/vCs24-Bk Black

15” x 24” slant sHelF witH Front lip 60°part # FinisH

Gw6-BC Bright ChromeGw6-Bk Black

24” x 24” trianGUlar sHelFpart # FinisH

Gw5-BC Bright ChromeGw5-Bk Black

15” x 24” straiGHt sHelF witH Front lip 90°

part # FinisHGw8-BC Bright ChromeGw8-Bk Black

GRIDWALL & ACCESSORIES

Any Angle, Any Panel, Any Display PRODUCT FEATURES:• Join panels in thicknesses ranging

from 1/8" to 3/4"!• The Klem® connector makes it easy

to create angles from 90° to 270°!• Ideal for straight or curved walls,

prisms, squares cubes, pyramids, domes or any type of display!

• Made of nickel plated zinc alloy and synthetic rubber inserts. The Klem® connector provides great strength and long term durability.

• Standard gap between panels Mini = 1/2" Super = 3/4".

• To Close gap between panels, Notch the panels.Mini = 1/4" x 15/16" Super = 5/16" x 1-3/8"

BMW SHOWROOM IN AUSTRIA

SHOWCASE PARTITION

MULTIPLE PANELS

TRADE SHOWS

MUSEUMS & GALLERIES

®

C-154

C-155

MANY CONNECTION OPTIONS!

BODIES ONLYwithout inserts

INSERT PAIRS ONLY

SINGLE INSERTS ONLY

TUBING INSERTS ONLY

BODY WITH LEVELING FOOT

BODY WITH TWIN WHEEL CASTER w/BRAKE

BODY WITH WALL MOUNT

HEX KEY

NUTS AND BOLTS

To be used when connecting panels.

WALL MOUNT

LEVELING FOOT

CASTER

3-WAY PANEL

4-WAY PANEL

TUBE TO PANEL

TUBE TO TUBE

Fits 3/4" Tubing Fits 1-1/8" Tubing

Caster Diameter is 2" - Load Rating = 75 lbs per casterTo be used with a single insert or tubing

To be used when connecting tubes.

To be used with a single insert or tubing

To be used with a single insert or tubing

ANY PANEL! ANY ANGLE! ANY DISPLAY!®

For panel thicknesses from 3/8" to 3/4"

2-7/16"

1-1/4"

1-5/8"

SUPER ®

* Please specify panel size 10=3/8", 12-1/2", 16=5/8", 19=3/4"

Example: for 1/2" panels, Part# is 7123S-12.

1-11/16"

1-1/16"

7/8"MINI ®

For panel thicknesses from 1/8" to 5/16"

* Please specify panel size 2=1/8", 4-3/16", 6=1/4", 8=5/16"

Example: for 1/4" panels, Part# is 7123M-6. Gap Between Panels = 1/2" Gap Between Panels = 3/4"

MINI KLEM7123M

SUPER KLEM7123S

MINI KLEM0802PR = 1/8"0804PR = 3/16"0806PR = 1/4"0808PR = 5/16"

SUPER KLEM0210PR = 3/8"0212PR = 1/2"0216PR = 5/8"0219PR = 3/4"

MINI KLEM0802 = 1/8"0804 = 3/16"0806 = 1/4"0808 = 5/16"

SUPER KLEM0210 = 3/8"0212 = 1/2"0216 = 5/8"0219 = 3/4"

MINI KLEM0713

1/2"ROUND TUBING

SUPER KLEM0320

3/4"ROUND TUBING

MINI KLEM7123M-LF

SUPER KLEM7123S-LF

MINI KLEM7123M-CSTR

SUPER KLEM7123S-CSTR

MINI KLEM7123M-WM

SUPER KLEM7123S-WM

MINI KLEM0160

SUPER KLEM0170

MINI KLEM7123M-NB

SUPER KLEM7123S-NB

PART #7123S-*PART #

7123M-*

A quality range of

highly versatile modular

exhibition display system.

No other way makes it so easy!

Many of the configurations fold up and down in minutes - without tools!

Museums

So Simple To Build!This all inclusive modular system features an extensive range of profiles and components, thus allowing great flexibility in designing and fabricating permanent or demountable fixtures for SIGNAGE, EXHIBITION BOOTHS, DISPLAY CASES, STORE DISPLAYS, MUSEUMS, PARTITIONS, CABINETS, FURNITURE…

. . .THE POSSIBILITIES ARE ENDLESS!

C-156

SHOWN IN USE:Profile 88292 Braces Diagonal 515A ConnectorsT-88 Endcaps

Showbooths

SHOWN IN USE:92C2 Radius & 608B Connector93 Vertical

PartitionsSHOWN IN USE:Our Gridwall Panels and Accessories (See pages 152-153)

These pictures are just some of the designs that our customers have used the FOGA® SYSTEM for. Fax us the drawing of your design and we will quote you a price. We can also cut the FOGA® SYSTEM to size and install the proper connectors so your units are ready to assemble.

SHOWN IN USE:Double 21 pcs. Hinged w/621A HingeSingle 21 End ProfileHorizontals Are 91 Profiles w/615A Connectors* Upper and Lower Sections

Are Stacked Upon Each Other Using 621M Metal Stack Pins

621F Rubber Bumper Foot

SHOWN IN USE:93 Vertical92F Horizontal w/615B Connector92 Horizontal w/615B Connector

92L Horizontal w/92C1 Radius93 Vertical Posts92 Horizontal w/615B Connectors

C-157

FOGA® - truly an affordable solution to enhance your company’s image.

These pictures are just some of the designs that our customers have used the FOGA® SYSTEM for. Fax us the drawing of your design and we will quote you a price. We can also cut the FOGA® SYSTEM to size and install the proper connectors so your units are ready to assemble.

Store Displays

Display Cases • Retail shop or store• Merchandising display• Residential Interior• Exhibition• Concessionaires

SHOWN IN USE:525 Shelf Supports94R Vertical

Signs and Outdoor Structure

92F Horizontal (4 positions)321/322/323 Sliding Door Track System

C-158

C-159

SHOWN IN USE:Light Track - 93 Horizontal Miter Cut 45° End Connects Using 605 Connector. Diagonal Braces Are Profile 90 w/608A-L & 608A-R Connectors.Towers & Case Frames Are Individual Units Connected Together Using Special Hardware. Profile For Tower Are 92R Verticals & 91F Horizontal w/615B Connector.Cases Are 92L or 92R Verticals, 92L & 355 Trim For Horizontal Tops, 92F Center Horizontal Rail, 92L Horizontal Bottom Rail w/615B & 615A Connector.

Kiosk

NEED PANELS FOR YOUR DISPLAYS?

Plain, uncovered Gatorfoam®

panels are also available - please inquire.

We offer panels for your displays. The panels are made from 3/16” thick core Gatorfoam® with Veltex® fabric applied with special adhesive made specially for the fabric. The Veltex® fabric is Velcro® compatible and comes in 13 designer colors. The panels can be cut to custom sizes to fit your needs.

FABRIC COVERED PANELS:

Gatorfoam®

Veltex® fabric

Veltex® fabric

Call our sales staff for design assistance.

NOTE: Due to fading, discoloration & paper aging, the colors on this page may vary from the actual colors. Please request samples before placing your order for color accuracy.

Black 803

Purple 839

Par Green 834

White 819Eggshell 818Beige 817Jungle 814

Pink 822

Royal Blue 807Navy 805Sterling 800

Antique Grey 821Platinum 820

Veltex® Fabric Color Selection

FABRIC BY THE FOOT • Part# VLL40-Our Veltex® fabric is available by the foot. Size - 60” wide x your choice of running feet.Also available is a full bolt of Veltex® fabric. Bolt Size - 60” Wide x approximately 120 Feet Long.

PART # SIZEVLP-316-4896- 48” x 96”VLP-316-4872- 48” x 72”VLP-316-4860- 48” x 60”VLP-316-4848- 48” x 48”VLP-316-4836- 48” x 36”VLP-316-4824- 48” x 24”VLP-316-3096- 30” x 96”VLP-316-3072- 30” x 72”VLP-316-3048- 30” x 48”VLP-316-3036- 30” x 36”VLP-316-3024- 30” x 24”

■End Cap ●Ceiling Jack ▲Adjustable Foot uShelf Holder

60 34 82 90 91 91F 91FF

92 92L 92R 92F 92FF 92LF 92LR

194 194R

92LRF 93

93R 94 94R

CHANNEL SPECS: Channel Widths: 9mm (11/32”) Channel Depths: 10mm (3/8”)CONVERSIONS: MM to IN: (MM ÷ 25.4) IN to MM: (IN x 25.4) MTR to FT: (MTR x 3.281) FT to MTR: (FT ÷ 3.281)

92LC 92LRC

PROFILES MOST ALUMINUM LENGTHS ARE STOCKED IN (5-MTR OR 16.4’) LENGTHS

PART# DESCRIPTION ACCESSORIES60 Horizontal or vertical, beveled two-way 90° corner ■T60 ▲709 u525 950 ■T953B ■T953Z ■T96234 Corner section 120°82 135°, inside shelf support ■T82 ▲707 u52590 Horizontal or vertical, square tube ■T90 ●630 ▲700 ▲70891 Horizontal or vertical, one way ■T91 ●630 ▲700 ▲708

91F Horizontal, one way w/ flange ■T91 ●630 ▲700 ▲70891FF Horizontal, one way w/ twin flanges ■T91 ●630 ▲700 ▲708

92 Horizontal or vertical, two way ■T92 ●630 ▲700 ▲70892L Horizontal or vertical, two-way 90° corner ■T92R ●630 ▲700 ▲708 950 92R Horizontal or vertical, two-way 90° corner ■T92R ●630 ▲700 ▲708 950 ■T964 ■T967 ■T97192F Horizontal or vertical, two way w/ flange ■T92 ●630 ▲700 ▲708 950

92FF Horizontal or vertical, two way w/ twin flange ■T92 ●630 ▲700 ▲70892LF Horizontal or vertical, two-way 90° corner w/ flange ■T92R ●630 ▲700 ▲708 950 ■T964 ■T967 ■T97192LR Horizontal or vertical, two-way 90° corner w/shelf support ■T92LR ▲707 u525 950 ■T952B ■T952Z ■T960

92LRF Horizontal, one way 90° corner w/ flange ■T92LR ▲707 950 ■T952B ■T952Z ■T960 92LC Extra wide profile (e.g. for wall mounted showcases)

92LRC Extra wide profile (e.g. for wall mounted showcases)151 Horizontal or vertical, one way circular profile93 Horizontal or vertical, Three Way ■T93 ●630 ▲700 ▲708 u510

93R Horizontal or vertical,. Three Way w/ shelf support ■T93 ●630 ▲700 ▲708 u52594 Horizontal or vertical, Four Way ■T94 ●630 ▲700 ▲708 u510

94R Horizontal or vertical, Four Way w/ shelf support ■T94 ●630 ▲700 ▲708 u525194 Horizontal or vertical, Four Way Square ■T194 ●630 ▲700 ▲708

194R Horizontal or vertical. two-way 90° corner ■T194R ▲700 ▲708

151

C-160

FOGA® SYSTEMS

w

292

292S 293 294 66 84

85 88

160

51 52 153 154

192 193 01

02

03

04

302 62



100

PART# DESCRIPTION ACCESSORIES100 Horizontal or vertical, two way 100mm deep fascia160 Horizontal or vertical, two way 160mm deep fascia292 Horizontal or vertical, two way ■T92

292S Horizontal or vertical, 4 Way Quadrant, large 90° corner293 Horizontal or vertical, 3 Way Side Channel294 Horizontal or vertical, Eight Way for larger structural designs ■T194 ●630 ▲700 ▲70866 Six Way Pole ■T66 ●631 ▲70584 135°, Four Way Pole (section of 88)85 180°, Five Way Pole (section of 88) ■T85 ●630 ▲70388 Eight Way Pole ■T88 ●630 ▲70351 Horizontal or vertical, one way rounded corners ■T52 ●630 ▲700 ▲70852 Horizontal or vertical, two way rounded corners ■T52 ●630 ▲700 ▲708

153 Horizontal or vertical, three way rounded corners ■T153 ●630 ▲700 ▲708154 Horizontal or vertical, four way rounded corners ■T154 ●630 ▲700 ▲708192 Horizontal or vertical, Two Way193 Horizontal or vertical, Three Way01 Horizontal or vertical, single channel ●610 ●61302 Horizontal or vertical, twin channel ●610 ●61303 Horizontal or vertical, three way channel04 Horizontal or vertical, four way channel

302 Snap fit panel profile 01 (use w/ 313 in-channel clips)62 60° corner profile

93S Profile 93 One Side Closed ■T93 ●630 ▲700 ▲708 u51094S Profile 94 One Side Closed ■T94 ●630 ▲700 ▲708 u510

93S 94S


C-161

FOGA® SYSTEMS

30

75 180A 190

82AE 92LA 92LL 92LRS 92LRV

S100140D 141D

150D

616

200D

W90

650

76

74



164

S01S4080S75S

PART# DESCRIPTION75S Horizontal or vertical, square channel80S Horizontal or vertical, square channelS40 Post profile, specially for signsS01 Aluminum trim for post profile S4074 Upright, four way, small circular profile w/ ribbed finish75 Upright, five way, small circular profile w/ ribbed finish76 Upright, six way, small circular profile w/ ribbed finish

180A Upright, four way, large circular profile w/ ribbed finish164 Upright, four way, large eliptical profile w/ ribbed finish190 Upright, four way, small eliptical profile w/ ribbed finish

82AE Upright, 135° channel w/ outside shelf support92LA Upright, 90° corner w/ outside edge shelf support92LL Horizontal or vertical, double 90° corner channel

92LRS Horizontal or vertical, 90° corner w/ shelf support and screw port92LRV Horizontal or vertical, 90° corner without R-channel

650 Panel corner clamp, holds graphics independent of your infill panels140D Ceiling decor profile (mill finish only)141D Ceiling decor profile (mill finish only)S100 Note holder, wall mounted profile616 90° connector for 140D, 141DW90 Panel Holder Spring150D Horizontal or vertical, flat infill that slides in FOGA channels200D Horizontal or vertical, decorative infill that slides in FOGA channels

C-162

FOGA® SYSTEMS

CURVED PROFILES MOST ALUMINUM LENGTHS ARE STOCKED IN (5-MTR OR 16.4’) LENGTHS


Any radius is available from 15” & up. All are custom bent in house. Please call for a quotation.

40

R

40

40

20

R

40

D

Quartercircle Segment

Semicircle

PART # DESCRIPTION51C2 Radius - 1/4 RD - R=1000MM52C2 Radius - 1/4 RD - R=1000MM91C0 Radius - 1/4 RD - R=250MM91C1 Radius - 1/4 RD - R=500MM91R1 Radius - 1/4 RD - R=600MM91C2 Radius - 1/4 RD - R=1000MM92C0 Radius - 1/4 RD - R=250MM92C1 Radius - 1/4 RD - R=500MM92C2 Radius - 1/4 RD - R=1000MM92C3 Radius - 1/4 RD - R=1500MM92C4 Radius - 1/4 RD - R=2000MM92D1 Radius Segment 1/2 RD - D=1000MM

292C1 Radius - 1/4 RD - R=500mm292C1 Radius - 1/4 RD - R=1000mm

40

20

40

20

30

20 20

40

20

80

51 91 9252

292

PART # DESCRIPTION ACCESSORIES105 Doorstop w/ wool pile 503 506-10150 Clothes rail w/ plastic insert along top edge202 Double channel adaptor, slides down channel end301 Channel adaptor, for panels up to 37mm304 Channel adaptor for slatwall panels312 Spacer, fits to top of sliding glass doors313 In-channel clip for 326 and 327315 Channel infill, anodized aluminum finish318 Plastic Sliding Door Track 16MM - 13’ - 4M Len.319 Plastic Sliding Door Track 6MM - 13’ - 4M Len.

320-20 Alum. Sliding Door Track - 20MM Wide320-24 Alum. Sliding Door Track - 24MM Wide320-28 Aluminum Sliding Door Track

321 Roller rail for sliding door assembly 322 323 325 405322 Roller carriage rail, Ball Bearing for 321323 Plastic end cap for 321325 Mitred corner cleat, for profile 321326 Lower Rail Profile for 321 (use 313)327 Upper Rail Profile for 321 (use 313)

327L Vertical edge Profile for 321 (use 313)405 Sliding door lock for profile 321MTR Roller

150 202 301

313315

312

318 319 320-24320-20

321320-28

326 327

327L MTR

325

405

105

DISPLAY AND SLIDING DOOR FITTINGS

322 323

304


C-163

FOGA® SYSTEMS

403402 408 410 411412

415416

420

630 700703705

707708

710 720

765 766 876

T21L, T21R

T21ALT21AR

T33 T51T52

T60 T66

T82 T85 T88 T90

T91 T92 T92RT92LR

T93 T93R T94 T94R T153T154

T194 T194R

702701PART # DESCRIPTION

402 Pivot w/ grub screws403 Hinge, for 20mm wide profiles w/ screws and bevel nuts408 Hinged door lock, for 20mm profiles410 Full height door lock, for use with for profile 292411 Lock for Glass Door - Gold finish412 Lock for Glass Door - Silver finish415 Hinge for Glass Door - Gold finish416 Hinge for Glass Door - Silver finish420 Gear-edged hinge, 20mm x 20mm630 Ceiling jack, secures top of uprights700 Adjustable Foot, 40mm dia. base, M10 thread, for 90 series, 701 Aluminum foot insert, M8 thread, use w/ 708/profile 90 series702 Aluminum foot insert, M8 thread, use w/ 707/profile 82 or 92LR series703 Adjustable Foot, 40mm dia. base, M10 thread, use w/ 88 705 Adjustable Foot, 40mm dia. base, M10 thread, use w/ 66707 Adjustable Foot, 20mm dia. base, M8 thread, use w/ 82 & 92LR708 Adjustable Foot, 20mm dia. base, M8 thread, for 90 series, 710 Anodized aluminum foot 40 x 10 x 500mm720 Anodized aluminum foot or shelf bracket 20 x 10 x 300mm765 Double caster w/ brake766 Double caster without brake876 Heavy duty hardened steel hand punch

HINGES, LOCKS AND FEET MOST ALUMINUM LENGTHS ARE STOCKED IN (5-MTR OR 16.4’) LENGTHS


END CAPS510 514 520 525

590530 550

PART # DESCRIPTION510 Shelf holder for profiles 92L, 93 & 94514 Shelf holder for profiles 93 & 94

520 Multi-purpose fixing bracket w/screw & 503 nut,mounts to FOGA channel

525 Shelf holder, fastens into R-Channel (92LR)

530 Shelf holder, fixes through pre-drilled hole in panels,two piece design

550 Shelf holder, fixes to the FOGA channel supplied w/screws & 503 bevel nuts

590 Shelf holder, extra long grub screw w/cap that forms shelf holder (for use w/600 connector only)

SHELF HOLDERS

T74 T75S

T91A T92LA

T164*

T180

T190

Grey Plastic Caps, unless noted *-Anodized Aluminum

C-164

FOGA® SYSTEMS

125 126 130 130-30

139 140

310 329230230B

330331

339340

346 347

355 503

145PART# DESCRIPTION

125 Flange adaptor, hooks over channel edge, 20mm126 Flange adaptor, hooks over channel edge, 10mm130 Shelf Bracket - 300mm Horizontal

130-30 30° Angle shelf bracket - 300mm136 Channel infill, use w/ 313 in-channel clips137 Channel infill, use w/ 313 in-channel clips139 Channel infill, slides down channel end, mill finish140 30° Angle shelf bracket, anodized aluminum finish145 Shelf bracket, use w/ profiles painted gray finish230 Adjustable shelf bracket, 300mm

230B Adjustable shelf bracket, 300mm w/edge310 Spring Clip Panel Retainer329 Curtain Glides - 50 pcs.330 Glazing Rigid - Gray - For 3/16” to 1/4” Fill - 100”331 Glazing Rigid - Black- For 3/16” to 1/4” Fill - 100”339 Plastic channel infill, Gray340 Plastic channel infill,Black346 Black rubber gasket, for 3-4mm panels347 Two-piece plastic glazing gasket, Black, 13’ - 4Mtr.355 Flange adaptor, Transparent - 13’ - 4Mtr.503 Beveled Edge Locking Nut, M5 thread504 Beveled Edge Locking Nut (R-Channel)505 Standard Channel Nut, M8 thread551 Panel holder can also be used to hold

graphic panels if rotated through 90°

504

137

136

GLAZING GASKETS, TRIM LOCKING NUTSMOST ALUMINUM LENGTHS ARE STOCKED

IN (5-MTR OR 16.4’) LENGTHS


CORNER COUPLINGS

300mm long

100mm long 140mm long

551

505

135°

PART # DESCRIPTION950 Corner Connector952 Corner Connector - 135° for 92LR953 Corner Connector - 135° for 60

952, 953950 END CAPS - PLASTIC (unless otherwise noted)

PART # DESCRIPTIONT952B Zinc, Glossy Chrome

w/screw 82, 92LR(F)T952Z Zinc, Unfinished

w/screw 82, 92LR(F)

T953B Zinc, Glossy Chrome w/screw 82, 60

T953Z Zinc, Unfinished w/screw 82, 60

T951B Zinc, Glossy Chrome w/screw 92LR(F)

T951M Zinc, Matte Chrome w/screw 92LR(F)

T951Z Zinc, Unfinished w/screw 92LR(F)

T951SB Plastic, Glossy Chrome w/screw 92LR(F)

T951SBG Plastic, Glossy Gold w/screw 92LR(F)

PART # DESCRIPTIONT960 Plastic, Glossy Black, Snap 92LR(F)

T960B Zinc, Glossy Chrome w/screw 60T960Z Zinc, Unfinished w/screw 60

T960SB Plastic, Glossy Chrome w/screw 60T960SBG Plastic, Glossy Gold w/screw 60

T961 Plastic, Matte Chrome, Snap 92LR(F)T962 Plastic, Glossy Chrome, Snap 60T963 Plastic, Matte Chrome, Snap 60T964 Plastic, Glossy Black, Snap 92L, 92RT965 Plastic, Glossy Black, Snap 194RT966 Plastic, Matte Chrome, Snap 194RT967 Plastic, Matte Chrome, Snap 92L, 92RT968 Plastic, Glossy Chrome, Snap 194RT969 Plastic, Glossy Chrome, Snap 92LR(F)T970 Plastic, Glossy Chrome, Snap 60T971 Plastic, Glossy Chrome, Snap 92L, 92R

C-165

FOGA® SYSTEMS

600 600R 601 604 605

607 608 608B 608AR 608AL

609 610 612

613

615A 615B 618

624 540

PART # DESCRIPTION600 Connector, with adjustable head

600R Round-head bolt, for 600 connector600G Pivot-head bolt, for 600 connector601 Joint connector604 Joint Connector Flange605 90° Internal connector, for mitred corner joint607 Multi Purpose Connector608 Connector, expanding jaw locking method (1 pc.)

608B Connector, expanding jaw locking method (2 pc.)608AR Connector - 45° (right)608AL Connector - 45° (left)

609 Joint Connector610 90° connector, for joining mitred corners612 90° connector, for joining mitred corners, use w/ 91A, 92A613 90° connector, for joining mitred corners (flat)

615A Connector-Drawer Type (perpendicular)615B Connector-Drawer Type (parallel)618 Parallel Connector624 Internal adjustable mitred corner coupling625 Internal mitred corner coupling, for 90° Angle540 Hanging clip, to produce butt joints (e.g. on ceiling grids)

70 72

752750

101

102

760

104

764741740

PART # DESCRIPTION70 Single channel sliding door track72 Double channel sliding door track73 Triple Channel Sliding Door Track

101 Threshold rail w/ single channel102 Threshold rail w/ double channel104 U-Profile740 Black rubber seal, for profiles 70 & 72741 Wool Pile For Door Seal750 Roller carriage for profile 70752 Roller carriage for profile 72 & 73760 Stops for profiles 70, 72 & 73764 Steering pin for profiles 70 & 72

73

600G

COUPLINGS MOST ALUMINUM LENGTHS ARE STOCKED IN (5-MTR OR 16.4’) LENGTHS


625

SLIDING DOOR FITTINGS

24

C-166

FOGA® SYSTEMS

21 33

M21

621MD621ME 621F

621P

621A

621PA

21-3 21-A

621L

621AS

91A 600AC92A

621LA 633A

FOGA® MINI

7mm

14mm

M621FM621A

M91 M92

M600AM600B

M610

M318M92LR M319 M525

M707 M950BM950C

M872

PART# DESCRIPTIONM21 Ultralight Gear-edged profileM91 Horizontal or vertical, one way profileM92 Horizontal or vertical, two way profile

M92LR 90° Corner ChannelM318 Plastic Sliding Door Track (12mm deep)M319 Plastic Sliding Door Track(6mm deep)M525 Shelf Holder, for M92LR

M600A Connector For M91 & M92 (horz. head)M600B Connector For M91 & M92 (vert. head)M610 90° in-channel corner coupling

M621A Hinge set for M21M621F Black rubber foot for M21M625 90° Mitred Corner CouplingM707 Black plastic foot for M92LRM872 Drilling Tool For M600A, M600B

M950B Plastic corner knuckle for M92LR, black finishM950C Plastic corner knuckle forM92LR, chrome finish

21-1

M625

PART # DESCRIPTION21 Lightweight gear-edged profile

21-1 Gear-edged profile21-3 Gear-edged profile (3 way)21-A Lightweight gear-edged profile33 Heavy Duty gear-edged profile

91A Horizontal or vertical, one way, use 600AC92A Horizontal or vertical, two way, use 600AC

600AC Slimline design connector for 91A, 92A621A Hinging pins & plate for profile 21

621ME Single spigot621MD Double spigot621AS Plastic Stack Pin for 21A621S Plastic Stack Pin (60mm)

621SK Plastic Stack Pin (30mm)621F Black rubber foot For 21 & 21A621L Snap-on poster

621LA Snap-on poster for profile 21A, 91A & 92A621P Sliding door track for profile 21

621PA Sliding door track for profile 21A & 91A633A Hinging pins & plate for profile 33

FOGA® 21, FOGA® 21A, FOGA® 33 MOST ALUMINUM LENGTHS ARE STOCKED IN (5-MTR OR 16.4’) LENGTHS


621SK621S

C-167

FOGA® SYSTEMS

C-168

FOGA® IS A BUILDING SySTEM FULLy INTEGRATED AND MODULAR. ITS WIDE RANGE OF ALUMINIUM PROFILES AND UNIQUE PATENTED COUPLING MAkES IT A COMPLETE PROGRAM FOR ExHIBITIONS, SHOPFITTING AND INTERIOR DESIGN.

BUILD OFFICE PARTITIONS; BUILD FURNITURE, SHOWCASES, DISPLAy CABINETS, MERCHANDISING UNITS, SALES kIOSkS - THE LIST IS ENDLESS; ALL IT TAkES IS CREATIVITy - THE kIND yOU HAVE WITH FOGA®.

FOGA® IS AESTHETICALLy DESIGNED, PRECISION ENGINEERED ANDANODIZED IN NATURAL ALUMINIUM TO OFFER DESIGNERS COMPLETEFLExIBILITy IN DESIGN AND CREATIVITy.

FOGA®-System... No other way makes it so easy!FOGA®’s wide range of aluminium extrusions and components offers limitlessexpression to both the designer’s dilemma and the craftsman’s creativity. With FOGA® even non-standard designs provide maximum scope for adaption and reuse and the system’s speed and ease of assembly help to minimize construction and installation costs.Superior Strength of the FOGA® SystemThe FOGA® coupling system gains its superior locking strength through two main features:(a) The 3 mm profile shoulders.(b) The double locking faces of the locking which positively engage against both shoulders ensures that profile being coupled are square to each other at all times.The Key to FOGA® AssemblyThe key to FOGA® assembly is the exclusive FOGA® coupling. All extrusions have channels to accept the coupling providing infinite adjustments and flexibility. Thecoupling itself can be fitted to any extrusion which has the 20 mm x 20 mm square built into its shape. The only tool needed to assemble FOGA® is an allen key. Illustrated is FOGA® Profile 91. A 10 mm hole is punched or drilled 28,6 mm from the end of the profile to the center of the hole. The consistency of these measurements allows for the coupling to be inserted in all appropriate FOGA® Profiles and ensures accuracy of performance at all times.

Standard finish of all profiles is natural anodized to 10 microns. Color anodized or powder coated available to special order. Profiles available in 5 metre stock lengths.All dimensions in mm. SUBJECT TO TECHNICAL ALTERATIONS

A

B

(Back View)(Front View)

FOGA® SHIPPING CASES

Poly Shipping CaseBlack

CUSTOM

ORDER

FSU-SC-4030(Back View)(Front View)

FSU-SC-4131FSU-SC-4925

(Wheels)

(Back View)(Front View)

(Wheels) (Wheels)

A

A

B B

615B

1

2

3

615A

THE PATENT FOGA® COUPLING 6151. The screw should be levelled with the insert. Press the bolt into the case so that the insert drops down and level with the case.2. Push the coupling into the profile and release the press and the insert pops up into the punchhole.Tighten the coupling.

FOGA® System profile 91, already fitted with the patented FOGA® coupling, being engaged simply and speedily into profile 88.Insertion of the coupling bolt (a 90 degree turn and tighting with an alien key) produces a rigid and stable connection in all FOGA® constructions.

PART # SIZE WEIGHTFSU-SC-4925 49” x 25” x 9” I.D. 34 lbs.FSU-SC-4030 40¼” x 30¼” x 6” I.D. 21 lbs.FSU-SC-4131 41½” x 31½” x 8” I.D. 32 lbs.

FSU-SC-CU

FOGA® SYSTEMS

C-169Tightening Screw

STOCKED FINISHES: Almond = AL, Bright Chrome = BC, Black = BK, White = WH

Single Slotted Wall StandardsSingle Slotted “Slim Line” StandardsDouble Slotted StandardsFor Installation, Countersunk Holes Accept #8 Flat Head Wood Screw (Not Included).

.062” Steel With Slots To Accept All RegularBrackets.

1-1/4” Wide x 1/2” Deep Slots are 1” O.C.

For Installation, Countersunk Holes Accept #8 Flat Head Wood Screw (Not Included).

9/16” Slots On 1” Centers, 3/4” Wide x 3/8” Deep x .062” Thick.

Stock Lengths:36”, 48”, 60” & 72” .Inquire about 84” & 96” Lengths.

For Installation, Countersunk Holes Accept #8 Flat Head Wood Screw (Not Included).

Use With Single Blade Bracket, 3/8” Wide x 3/8” Deep,.060” Steel.

Slots are: 9/16” Long x 3/8” Deep.

Slots are 1” O.C.

HEAVY DUTY BRACKETS To accept snap-on attachments & shelf clips

Fits 1” slots on 2” centers, up to .125” thickness

stabilizer screw

Fits slotted standards,1/2”-5/8” slots on 1” centers

For installation, set into standard then tap down with rubber mallet

WEDGE BRACKETS

GENERAL DUTY WOOD SHELF BRACKETSBlack, Almond, White

Fits slotted standards, 1/2”-5/8” slots on 1” centers

INCLINABLE WOOD SHELF BRACKETINCLINABLE GENERAL DUTY SHELF BRACKET Black, Almond, White

Fits slotted standards,1/2”-5/8” slots on 1” centersAdjust up 15° and down every 15° to 60°Black, Almond, White

Fits slotted standards, 1/2”-5/8” slots on 1” centersAdjust up 15° and down every 15° to 60°

STEEL SLOTTED STANDARDS

Bright Chrome Plated Or Powder Coated Black, Almond Or White

9/16”

Tightening Screw

9/16”9/16”

Chrome Only

PART # SIZEDS/84 84”DS/96 96”

PART # SIZETS/36 36”TS/48 48”TS/60 60”TS/72 72”

PART # SIZESS/36 36”SS/48 48”SS/60 60”

PART # SIZEHD10KB-BC 10”HD12KB-BC 12”HD14KB-BC 14”

PART # SIZE6KB- 6”10KB- 10”12KB- 12”14KB- 14”16KB- 16”

PART # SIZEAWB10- 10”AWB14- 14”

PART # SIZEAKB8- 8”AKB10- 10”AKB12- 12”AKB14- 14”

PART # SIZEWKB8- 8”

WKB12-AL 12”

BRACKETS AND STANDARDS

STEEL BRACKETS FOR SLOTTED STANDARDS

LET OUR SIMPLE CONCEPT FORM YOUR GREAT IDEA!

GREAT FOR: H TRADESHOWSH GREENHOUSESH MENUSH SIGNS

IDEAL FOR INDOOR & OUTDOOR USE!

AT TUBING & CONNECTOR SYSTEM

C-170

ALUMINUM FRAMING SYSTEM

C-171

1" SQUARE ALUMINUM TUBING w/FLANGES

.040 WALL THICKNESS for 1/4" PANEL

DOUBLE FLANGE.040 WALL THICKNESS for 1/8" PANEL

TRIPLE FLANGEQUAD FLANGE

.065 WALL THICKNESS

.040 WALL THICKNESS

.065 WALL THICKNESS for 7/32" PANEL

SINGLE FLANGE

TRIPLE FLANGE DOUBLE FLANGE

AT-2CL-8 AT-2BK-8

STANDARD SQUARE ALUMINUM TUBING

PART # FINISHAT-14CL-8 Clear Anodized







PART # FINISHAT-5CL-8 Clear AnodizedAT-5BK-8 Black Anodized




ALUMINUM FRAMING SYSTEM • 8 FT. LENGTHS

C-172

DUPONT™ SUPER TOUGHENED NYLON CONNECTORSAVAILABLE IN BLACK OR GREY

3WAY CORNER CONNECTOR

**3WAY CONNECTORw/HEAVY DUTY CASTER SOCKET

**NOTE: #F533C will accept a 3/8" diameter x 1" long friction fit caster stem (not included).

2WAY RIGHT ANGLE CONNECTOR 3WAY TEE CONNECTOR

6WAY CONNECTOR5WAY CONNECTOR

4WAY CONNECTOR

4WAY CROSS CONNECTOR

ADJUSTABLE 2WAY CONNECTORw/LOCKING NUT

CAPABLE OF

280° RADIUS

PART # COLORF533BK BlackF533GY Grey

PART # COLORF533C/BK BlackF533C/GY Grey







PART # COLORF52AJNBK BlackF52AJNGY Grey


C-173

DUPONT™ SUPER TOUGHENED NYLON CONNECTORSAVAILABLE IN BLACK OR GREY

With BrakeWithout Brake

Top Portion#(11) 3/8" x 1"FRICTION RING STEM

SAMSON (2" Dia.) or HERCULES (2-3/8" Dia.)U CLIP

WHEEL MATERIAL: ALL NYLON CONSTRUCTION

PERPENDICULAR JOINER/SPLICER FOR ANY AT TUBING

w/3/4" LONG SELF TAPPING SCREW

ALLOWS TO ATTACH

ANY TUBING AT A

PERPENDICULAR

ANGLE!

END CAP

FMJ557-4-S

4" LENGTHS ALUMINUM MATERIAL - SATIN FINISH

STRAIGHT BASE CONNECTOR

STACK PLUG FOR USE WITH

F533C CONNECTOR

GREAT FOR

STACKING CASES!

90° BASE CONNECTOR

ALL METAL HEAVY DUTYSHELF REST

for Glass or Wood Shelving

THE INVISIBLE COUPLING STRAIGHT CONNECTOR

1-1/8”

1” 5/16”

w/ith F533C

Fits over AT tubing - will hold fabric,

plastic sheeting and netting in place!

PART #LOAD

CAPACITYWithoutBrake

SAMS-11-BK 75HERC-11-BK 100

With Brake

SAMS-11-BK-BRK 75HERC-11-BK-BRK 100

PART # COLORF5112MCBK BlackF5112MCGY Grey

PART # COLORSHK-32S-BK Black


PART # COLORF4PSPGY Grey

PART # COLORF5323SPBK BlackF5323SPGY Grey

PART # FINISHF514BK Black AnodizedF514CL Clear Anodized




BLACK TWINWHEEL CASTERS

LOAD

PER CASTER

lbs. lbs.TO75 100

NEW!

Braided

WS-222-BRshown

v Furniture Grade Quality

v Solid Red Oak with English Oak Stain

v Durable commercial grade finish

v Handcarved

v Pre-finished & sealed with a hand rubbed teak oil.

v Works with all standard ropes

v Exquisite Craftsmanship

v 72 Combinations

v Ships UPS

Wood Stanchions

Ropes

Crushed Velour

Comes with choice of Brass Ring or Chrome Ring

Round Acanthus Leaf base shown

See page 180 for more information

on ropes

WS-223-BRshown

C-174

C-175


Brass Ring (BR)

Chrome Ring (BC)

WS-413-BRWS-413-BC

Overall Height:39”

Weight: 14 lbs.


Weight: 14 lbs.

WS-223-BRWS-223-BC


Weight: 14 lbs.

WS-133-BRWS-133-BC

12” Square

Ropes attach at a 36 inch height

s

Solid Red oak in a MediuM engliSh oak Stain

WOOD STANCHIONS - Square Egg & Dart Base

C-176


Brass Ring (BR)

Chrome Ring (BC)


Weight: 15 lbs.


Weight: 15 lbs.


Weight: 14 lbs.

WS-312-BRWS-312-BC

WS-222-BRWS-222-BC

WS-132-BRWS-132-BC

Diameter: 13-3/4”


s


WOOD STANCHIONS - Plain Round BaseWOOD STANCHIONS - Plain Round BaseWOOD STANCHIONS - Plain Round BaseWOOD STANCHIONS - Plain Round Base

C-177



Weight: 15 lbs.


Weight: 14 lbs.


Weight: 15 lbs.

WS-121-BRWS-121-BC

WS-211-BRWS-211-BC

WS-331-BRWS-331-BC

Diameter: 13-3/4”


s


Brass Ring (BR)

Chrome Ring (BC)

WOOD STANCHIONS - Round Acanthus Leaf Base

C-178

• All colors stocked in 33 ft. lengths (Polished Chrome stocked in 16 ft. lengths).• Available in 3/4”, 1”, 1-1/2” and 2” links.• Color chains must be purchased in full 33’ lengths. (Polished Chrome must be purchased in 16 ft. lengths).• All plastic chains come bagged except for 2” chain which comes on a reel.

*Color Code=BL (Blue)RD (Red)PK (Pink)GR (Green)OR (Orange)WH (White)BK (Black)PC (Polished Chrome)YE (Yellow)

(ONLY WORKS WITH PLASTIC STANCHIONS)SIGNAGE ADAPTER

PLASTIC CHAINS

SPRING LOADED NYLON RETRACTABLE CONNECTING LINK

PLASTIC CLOTHES PIN

Available Colors

Colors available: Black or White Colors available: Black or White

Colors available: Ivory • Clothes pin attaches to plastic chain.

Colors available: White, Polished Chrome or Black Colors available: White, Polished Chrome or BlackPLASTIC S-HOOKS PLASTIC CONNECTING LINKS

2”

9-1/2” Works with3/8”-5/8” Signage

GREAT FOR P.O.P. DISPLAYS

Other colors available - please inquire

POLISHED CHROME ONLYPART # SIZE

PC32-PC 1”PC48-PC 1-1/2”PC64-PC 2”

PART # SIZEPC24-* 3/4”PC32-* 1”PC48-* 1-1/2”PC64-* 2”

PART # COLORSNAP-BK BlackSNAP-WH White

PART # COLORPC-HANGPIN Ivory

BLACK & WHITE (COLOR CODE* BK=Black, WH=White)PART # SIZESH32-* 1”SH48-* 1-1/2”SH64-* 2”

POLISHED CHROMEPART # SIZE

SH32-PC 1”SH48-PC 1-1/2”SH64-PC 2”

BLACK & WHITE (COLOR CODE* BK=Black, WH=White)PART # SIZECL48-* 1-1/2”CL64-* 2”

POLISHED CHROMEPART # SIZE

CL48-PC 1-1/2”CL64-PC 2”

PART # COLORSN-SIGN-BK BlackSN-SIGN-WH White

PLASTIC & LIGHTED LED STANCHION ACCESSORIES

C-179

PLASTIC STANCHIONS WITH BASE

PRODUCT FEATURES:• Recommended maximum distance should not exceed 8’ between stanchions.• For added support, it is recommended that the base be filled with sand.• One C-hook assembly included with each stanchion. (C-Hook NOT removeable on SNB-40PC)

PLASTIC LANDSCAPE STANCHIONSWITH STAKEGreat For Most Control Needs!

Great For Outdoor Events, Landscapes & Gardens!

Other colors available - please inquire Other colors available - please inquire

3-1/4”

35”H

2-5/8” Dia.

C-Hook

16”H

PRODUCT FEATURES:• Recommended maximum distance should not exceed 8’ between stanchions.• One C-hook assembly included with each stanchion.

3-1/4”

40H”

14”Fill with sand

C-Hook

2-1/2” Dia.

Accepts Optional Sign Adaptor

OPTIONAL SIGNAGE ADAPTER OPTIONAL SIGNAGE ADAPTER

PLASTIC STANCHIONS WITH BASE“Crowd Control In A Box”

PRODUCT FEATURES:• Kit Includes: - 4 plastic stanchions (2-1/2” diameter x 40” high with 14” diameter base). (3” diameter for polished chrome). - 1 c-hook assembly included with each stanchion. - 33’ x 1-1/2” plastic chain (*32’ in polished chrome).• Recommended maximum distance should not exceed 8’ between stanchions.• For added support, it is recommended that the base be filled with sand.

VALUE PACK4Plastic chain easily connects to c-hook assembly.

Remove cap to slip chain

through or to connect

the optional signage adaptor.

3-1/4”

40H”

14”Fill with sand

C-Hook

2-1/2” Dia.

Accepts Optional Sign Adaptor

* 33 feet of chain included.

OPTIONAL SIGNAGE ADAPTER

See page 178 for more details on sign adaptor.



PART # COLOR DESCRIPTIONSNB-40BK Black 40”H x 2-1/2 Dia. SNB-40WH White 40”H x 2-1/2 Dia. SNB-40PC Polished Chrome 40”H x 3” Dia.

PART # COLOR DESCRIPTIONSNS-40BK Black 35”H x 2-5/8” SNS-40WH White 35”H x 2-5/8”



PART # COLORSNB-40BK-KIT BlackSNB-40WH-KIT WhiteSNB-40PC-KIT Polished Chrome


PUBLIC GUIDANCE SYSTEMS

C-180

Polished Stainless

Steel

Polished Brass

Satin Stainless

Steel

SNAPHOOKFINISH

CRUSHED VELOUR BRAIDED

Base Diameter 12½”

1 ” BaseHeight

Total Weight of stanchion: 23 lbs.Base Weight: 19 lbs.

PostDiameter

2”OverallHeight39 ”

₃⁄₈

½

Urn Top Finial

Product FeaturesWALL PLAtE

screws with anchors Included

NOtE: Please add appropriate color code & finish code to part # when ordering.(example: cLs-rP4-BrG-Br = 4 ft. Velvet rope, Burgundy with Brass Hooks)

Polished Chrome

(CH)

Polished Brass

(BR)

Black (BLK) Yellow (YEL) Blue (BLU) Red (RED) Burgundy (BRG) Black (BLK) Cream (CRE) Red (RED) Gold (GOL) Blue (BLU)

ROPES

WItH CRUSHED VELOUR OR BRAIDED ROPE

GUIDANCE

PREMIUM ROPES WITH WEIGHTED CHAINPART # StYLE LENGTH

CLS-RP4- Velvet 4 ft.CLS-RP6- Velvet 6 ft.

ECONOMY ROPESPART # StYLE LENGTH

*CLS-RP6E- Velvet 6 ft.* Available in Black, Blue & Burgundy

PART # StYLE LENGTHCLS-BRD4- Braided 4 ft.CLS-BRD6- Braided 6 ft.

PART # FINISHCLS-WP-BR Polished BrassCLS-WP-CH Polished Chrome

PART # FINISHCLS-609-SS Satin StainlessCLS-609-BR Polished BrassCLS-609-CH Polished Chrome

CLASSIC URN STANCHIONS

C-181

★ BUILT-IN 4-WAY ADAPTOR EXPANDS YOUR CONFIGURATION POSSIBILITIES

BLACK

BLUE

RED

BELT COLORS:

RETRACT-IT IIBlack Powder Coated or Chrome Plated Stanchions

with Polyester Retractable Belt

40”

Accepts OptionalSign Adaptor

2” Dia.

Polyester belt extends up to 76”

14½”

2” BaseHeight

2” Belt Width

Overall Weight of each stanchion: 20 lbs.

Base Weight: 16 lbs.

Top Width 2½”

Black Powder Coated

Polished Chrome

To be used w/ stanchions2-SIDED SIGN HOLDER

WORKS WITH RETRACT-IT IIHolds 8.5” x 11” sign

3”

2¾”

WALL MOUNT PLATE

*-(Red, Black & Blue)SET DOES NOT

INCLUDERCT2-PLATE

4½”

5”

Wall Distance

Expands up to 76”Long

2”

★ NON-MARRING RUBBERIZED FLOOR RING WITH A CORROSION RESISTANT GALVANIZED STEEL BASE

★ PRODUCT FEATURES:

★ ANTI-TAMPERSECURITY LATCH

BONUS FEATURE

★ WORKS WITH ALL MAJOR BRANDS OF STANCHIONS, ADD ON & SAVE!

★ SHIPS KNOCK DOWN IN A UPS SIZE CARTON!

with no-glare plastic protective plastic sheet

WALL MOUNT BELT POP BOWLWORKS WITH RETRACT-IT II

Perfect for impulse

buy items

IN STOCK TODAY!!!

“Thank You, Come Again”

PART# POST FINISH BELT COLORRCT2-BLK-BLK Black Powder Coated BlackRCT2-BLK-RED Black Powder Coated RedRCT2-BLK-BLU Black Powder Coated BlueRCT2-CHR-BLK Polished Chrome BlackRCT2-CHR-RED Polished Chrome RedRCT2-CHR-BLU Polished Chrome Blue

RCT2-PLATERCT2-SIGN

RCT2-WALL-*RCT2-BOWL

IN LINE QUEUE MANAGEMENT SYSTEM

Increase Your P.O.P.portunity®!Increase your POP opportunities while keeping your customers in line with our new In Line Queue Management System. Now you can mix and match the components within the system as required to suit your specific needs. The system

SEE PAGES 108-117

SEE PAGE 150

SEE PAGES 108-109

Maximize your P.O.P. space.

SEE PAGE 149

SEE PAGE 181

BLACK

BLUE

RED

ACCESSORIES

=

CREATE YOUR OWN IN LINE QUEUE MANAGEMENT SYSTEM

YOUR COMPLEtEIMPULSE PAth

GUIDAnCE SYStEM

comprises the following items: A. Stanchions & B. Slatwall.

++POLIShED ChROME POSt

YOUR ChOICE OF BELt COLORS

CLEAR AnODIZEDSLAtWALL

Impulse Path Maximize P.O.P.portunity® to sell

Increase impulse

purchases

“thank You, Come Again”

tOP EDGE OF SLAtWALL IS 34”

FROM BASE.

SEE PAGE 181

C-182

IMPULSE PATH - GUIDANCE SYSTEM

C-183

40”

Accepts OptionalSign Adaptor

2” Dia.

Polyester belt extends up to 76”

14½”

2” BaseHeight

2” Belt Width

Overall Weight of each stanchion: 20 lbs.

Base Weight: 16 lbs.

Top Width 2½”

A. POST OPTIONS• Offered in Polished Chrome.• Sturdy and versatile, the stanchions are shipped “knocked down” for reduced freight costs, and easily assemble by connecting the 38” post to its 2” high base.• Features easy-to-use 7-1/2 ft. retractable belts in Black, Blue or Red.• Each post includes your choice of a 90°, 180°, 3-way or 4-way locking channel mechanism to hold 1/2” material for on the spot crowd control adaptability.• Other finishes available, please inquire.

B. POP WALL OPTIONS• 15” Slimline Impulse Panel (3 panels @5” High) or

25” Standard Impulse Panel (5 panels @5” High), SHIPS KNOCKED DOWN.

• Available in 2 lengths: 48” or 72”.• Offered in Clear Anodized finish.• Slats are on both sides of the slatwall, enabling added POP opportunities.• 15” has 9 usable slots on one side, 8 on the other side, to hang products

from.• 25” has 15 usable slots on one side, 14 on the other side, to hang products

from.• Slats measure 1-1/2” on center.• Accepts most industry standard fittings and hardware.• Less than half the weight yet twice

as strong as conventional and cumbersome MDF Slatwall panels.

ShIPS KnOCKED DOWn

BLACK *(BLK)

BELt COLORS:(Choose appropriate color code)

2 SIDED

UNIVERSAL POST STARTER / END

RCT2-UNV-CHR-*

180° CENTER

RCT2-180-CHR-*

90° CORNER

RCT2-90-CHR-*

3 WAY 90° CORNER

RCT2-3WY-CHR-*

4 WAY CORNER

RCT2-4WY-CHR-*

For Slatwall products, see pages 142-151

.450”

.495”

1.500”

2 SIDEDPOP WALL

90°CORNERS

4-WAYCORNER

3-WAY 90°CORNERS

180°CENTER

ENDPOST

ExpressLane

EnterHere

PleaseStop Here

Checkout ExpressCheckout

PleaseStop Here

STANCHIONW/BELT

RCT2-CHR-*

DESIGn COnCEPt:

BLUE *(BLU)

RED *(RED)

PART# LENGTH15” Slimline Impulse Panel (3 panels @5” High)

PAN-154-S 15” Ht. x 4’ LongPAN-156-S 15” Ht. x 6’ Long

25” Standard Impulse Panel (5 panels @5” High)PAN-254-S 25” Ht. x 4’ LongPAN-256-S 25” Ht. x 6’ Long

IMPULSE PATH - GUIDANCE SYSTEM

C-184

3-1/4”

40H”

14”Fill with water

C-Hook

2-1/2” Dia.

Great For Nightclubs! Parking Lots! Restaurants!

Portable Lighted Plastic Stanchion with red, green, blue LED light. Continuous or flashing option. Requires 1 x 9v battery, (not included) or can run off the included power Adaptor (AC in DC out). Not for outdoor use when using AC/DC power adaptor.

• Average light time 1-2 hours with 9V battery.• Color: Red, Green, Blue Mix.• 21 Diodes = 420 m.A (Amper) Ideal for Decoration & Caution areas.• 4 Option Light Speed Control Switch (under cap finial).

Each post is 40 inches high including the cap finial. The base is 14” in diameter, and the post is 2-1/2” in Diameter. Each LED post weighs 4 lbs.

Great For Construction Sites and Parking Lots!HEAVY DUTY PLASTIC STANCHIONS

LIGHTED LED PLASTIC STANCHIONS

3-1/4”

40H”

14”

2-1/2” Dia.

C-Hook

PRODUCT FEATURES:• Recommended maximum distance should not exceed 20’ between stanchions.• When the base is completely filled with water, the stanchion weight increases to 16 lbs., thus providing additional support.• One C-hook assembly included with each stanchion.

PRODUCT FEATURES:• Recommended maximum distance should not exceed 8’ between stanchions.• One C-hook assembly included with each stanchion.


OPTIONAL SIGNAGE ADAPTER

STURDY!

PART #SN-LED

PART # DESCRIPTION SNB-40HD Yellow w/black stripes w/black base

SNB-40HD-KIT 4 pcs. Yellow w/black stripes w/black base


PUBLIC GUIDANCE SYSTEMS

store fixture systems

Documents

Transcript of store fixture systems