StorageTek Enterprise Library Software · RESUME Command 44 3. LCM 7.2 Field Tables 45 ACTION...
Transcript of StorageTek Enterprise Library Software · RESUME Command 44 3. LCM 7.2 Field Tables 45 ACTION...
Submit comments about this document to [email protected].
StorageTekEnterprise Library Software
LCM Quick Reference
Version 7.3
Part Number: E60155-01April 2015
ii April 2015
LCM Quick Reference
E60155-01
Copyright © 2015, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and areprotected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy,reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by anymeans. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please reportthem to us in writing.
If this is software or related software documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S.Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Governmentcustomers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation andagency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to therestrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Governmentcontract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500Oracle Parkway, Redwood City, CA 94065.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended foruse in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software orhardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures toensure the safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware indangerous applications.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Oracle and Java are registered trademarks of Oracle and/or itsaffiliates. Other names may be trademarks of their respective owners.
AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. Intel and IntelXeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks orregistered trademarks of SPARC International, Inc. UNIX is a registered trademark licensed through X/Open Company, Ltd.
This software or hardware and documentation may provide access to or information on content, products, and services from third parties.Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content,products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access toor use of third-party content, products, or services.
Contents
Preface iii
Audience iii
Prerequisites iv
Organization of This Publication iv
1. LCM Control Statements 1
ACTION CONSOLIDATE 2
ACTION DRAIN 3
ACTION EJECT 4
ACTION EXPORT 5
ACTION MIGRATE 6
ACTION MOVE 7
ACTION RECALL 8
ACTION RECLAIM 9
ACTION SCRATCH 10
ACTION UNSCRATCH 11
ACTION VAULT ASSIGN 12
ACTION VAULT RELEASE 13
ACTION VAULT RETURN 14
DATASET 15
LOCATION 15
MANAGE PHYSICAL 16
MANAGE VIRTUAL 17
METHOD 17
OPTIONS 18
E60155-01 • Revision 01 iii
PULLLIST 19
REPORT CELLCNT 19
REPORT CONSOLIDATE 19
REPORT DATASET 20
REPORT EJECT 20
REPORT ENTER 20
REPORT EXPORT 21
REPORT LSM 22
REPORT MVC_VTV 24
REPORT MIGRATE 26
REPORT MULTIPLE 26
REPORT NONSCRCNT 27
REPORT OPERATOR 27
REPORT PHYSICAL 28
REPORT RECALL 29
REPORT SCRCNT 29
REPORT SUMMARY 30
REPORT VAULT 31
REPORT VIRTUAL 32
REPORT VOLUME 33
REPORT VOLUME Continued 34
SET METHOD 35
SUBPOOL 35
TMS CA1 36
TMS COMMON 36
TMS CTT 37
TMS CUSTOM 37
TMS OPEN 38
TMS RMM 39
TMS TLMS 40
UNMANAGED 40
2. LCM Operator Commands 41
Using MVS Commands 41
iv LCM Quick Reference • Revision 01 • E60155-01
Using the MVS MODIFY Command to Monitor and Control LCM Batch Jobs 41
Using the MVS STOP Command to Stop LCM 41
Using the MVS MODIFY Command to Monitor and Control LCM Agent 42
LCM Operator Commands 43
DISPLAY Command 43
PAUSE Command 43
REDIRECT Command 43
RESUME Command 44
3. LCM 7.2 Field Tables 45
ACTION Statement WHEN Fields 46
SET METHOD Statement WHEN Fields 77
REPORT LSM Statement Fields 106
REPORT MVC_VTV Statement Fields 109
REPORT VOLUME Statement Fields 110
General Fields 156
Fields Specific to TMS CA1 189
Fields Specific to TMS CTT 201
Fields Specific to TMS Custom 211
Fields Specific to TMS Open 217
Fields Specific to TMS TLMS 223
E60155-01 • Revision 01 v
vi LCM Quick Reference • Revision 01 • E60155-01
Preface
Oracle’s StorageTek Enterprise Library Software (ELS) is a solution consisting of thefollowing base software:
■ Oracle’s StorageTek Storage Management Component (SMC)(includes the product formerly known as StorageTek HTTP Server)
■ Oracle’s StorageTek Host Software Component (HSC)
■ Oracle’s StorageTek Virtual Tape Control Software (VTCS)
■ Oracle’s StorageTek Concurrent Disaster Recovery Test (CDRT)
Additionally, the following software is provided with the ELS package:
■ ELS Supportive Software:
■ Oracle’s StorageTek Library Content Manager (LCM) (formerly ExLM)(includes the product formerly known as Offsite Vault Feature)
■ Oracle’s StorageTek Enterprise Library Management Station Media Audit Tracker(ELMS MAT)
■ Other Mainframe Software:
■ Oracle’s StorageTek Client System Component for MVS Environments(MVS/CSC)
■ Oracle’s StorageTek LibraryStation
Refer to the publication Introducing ELS for an overview of the ELS solution.
AudienceThis Quick Reference shows command and utility syntax and variable field values.
E60155-01 • Revision 01 vii
PrerequisitesTo perform the tasks described in this guide, you should already understand thefollowing:
■ MVS or OS/390 operating system
■ LCM basic function and operation; for more information, see LCM User’s Guide.
Organization of This PublicationTABLE P-1 describes the contents of this publication.
Documentation AccessibilityFor information about Oracle's commitment to accessibility, visit the OracleAccessibility Program website at
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc
Access to Oracle SupportOracle customers that have purchased support have access to electronic supportthrough My Oracle Support. For information, visithttp://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visithttp://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you arehearing impaired.
TABLE P-1 Organization of this Publication
Section Contents
“LCM ControlStatements” on page 1
LCM control statement syntax
“LCM OperatorCommands” on page 41
LCM operator commands syntax
“LCM 7.2 Field Tables”on page 45
LCM field tables descriptions
viii LCM Quick Reference • Revision 01 • E60155-01
Tables
TABLE P-1 Organization of this Publication viii
TABLE 3-1 ACTION Statement WHEN Fields 46
TABLE 3-2 SET METHOD Statement WHEN Fields 77
TABLE 3-3 REPORT LSM Statement Fields 106
TABLE 3-4 Additional REPORT MVC_VTV Statement Fields 109
TABLE 3-5 REPORT VOLUME Statement Fields 111
TABLE 3-6 General Fields 157
TABLE 3-7 Fields Specific to TMS CA1 189
TABLE 3-8 Fields Specific to TMS CTT 201
TABLE 3-9 Fields Specific to TMS Custom 211
TABLE 3-10 Fields Specific to TMS Open 217
TABLE 3-11 Fields Specific to TMS TLM 223
TABLE 3-12 Valid Formats for Date Fields 236
TABLE 3-13 Valid Formats for Time Fields 236
E60155-01 • Revision 01 ix
x LCM Quick Reference • Revision 01 • E60155-01
CHAPTER 1
LCM Control Statements
E60155-01 • Revision 01 1
ACTION CONSOLIDATE
2 LCM Quick Reference • Revision 01 • E60155-01
ACTION DRAIN
E60155-01 • Revision 01 Chapter 1 3
ACTION EJECT
4 LCM Quick Reference • Revision 01 • E60155-01
ACTION EXPORT
E60155-01 • Revision 01 Chapter 1 5
ACTION MIGRATE
6 LCM Quick Reference • Revision 01 • E60155-01
ACTION MOVE
E60155-01 • Revision 01 Chapter 1 7
ACTION RECALL
8 LCM Quick Reference • Revision 01 • E60155-01
ACTION RECLAIM
E60155-01 • Revision 01 Chapter 1 9
ACTION SCRATCH
10 LCM Quick Reference • Revision 01 • E60155-01
ACTION UNSCRATCH
E60155-01 • Revision 01 Chapter 1 11
ACTION VAULT ASSIGN
12 LCM Quick Reference • Revision 01 • E60155-01
ACTION VAULT RELEASE
E60155-01 • Revision 01 Chapter 1 13
ACTION VAULT RETURN
14 LCM Quick Reference • Revision 01 • E60155-01
DATASET
LOCATION
E60155-01 • Revision 01 Chapter 1 15
MANAGE PHYSICAL
16 LCM Quick Reference • Revision 01 • E60155-01
MANAGE VIRTUAL
METHOD
E60155-01 • Revision 01 Chapter 1 17
OPTIONS
18 LCM Quick Reference • Revision 01 • E60155-01
PULLLIST
REPORT CELLCNT
REPORT CONSOLIDATE
E60155-01 • Revision 01 Chapter 1 19
REPORT DATASET
REPORT EJECT
REPORT ENTER
20 LCM Quick Reference • Revision 01 • E60155-01
REPORT EXPORT
E60155-01 • Revision 01 Chapter 1 21
REPORT LSM
22 LCM Quick Reference • Revision 01 • E60155-01
E60155-01 • Revision 01 Chapter 1 23
REPORT MVC_VTV
24 LCM Quick Reference • Revision 01 • E60155-01
E60155-01 • Revision 01 Chapter 1 25
REPORT MIGRATE
REPORT MULTIPLE
26 LCM Quick Reference • Revision 01 • E60155-01
REPORT NONSCRCNT
REPORT OPERATOR
E60155-01 • Revision 01 Chapter 1 27
REPORT PHYSICAL
28 LCM Quick Reference • Revision 01 • E60155-01
REPORT RECALL
REPORT SCRCNT
E60155-01 • Revision 01 Chapter 1 29
REPORT SUMMARY
30 LCM Quick Reference • Revision 01 • E60155-01
REPORT VAULT
E60155-01 • Revision 01 Chapter 1 31
REPORT VIRTUAL
32 LCM Quick Reference • Revision 01 • E60155-01
REPORT VOLUME
E60155-01 • Revision 01 Chapter 1 33
REPORT VOLUME Continued
34 LCM Quick Reference • Revision 01 • E60155-01
SET METHOD
SUBPOOL
E60155-01 • Revision 01 Chapter 1 35
TMS CA1
TMS COMMON
36 LCM Quick Reference • Revision 01 • E60155-01
TMS CTT
TMS CUSTOM
E60155-01 • Revision 01 Chapter 1 37
TMS OPEN
38 LCM Quick Reference • Revision 01 • E60155-01
TMS RMM
E60155-01 • Revision 01 Chapter 1 39
TMS TLMS
UNMANAGED
40 LCM Quick Reference • Revision 01 • E60155-01
CHAPTER 2
LCM Operator Commands
Using MVS Commands
Using the MVS MODIFY Command to Monitor andControl LCM Batch JobsYou use the MVS MODIFY command to issue the LCM Display, Pause, REDIRect, andResume commands.
For example, to display the status of CAP 000 for jobname LCM, enter:
f lcm,display cap 000
Using the MVS STOP Command to Stop LCMYou can use the MVS STOP command to stop LCM. It will allow in-process operationsto complete as follows:
■ All volumes currently being ejected are placed in a CAP and must be removedbefore LCM stops.
■ All volumes currently being moved are placed their destination cells before LCMwill stop.
■ All currently scheduled consolidations will complete.
For example, to stop jobname LCM:
p lcm
Caution – If you enter the STOP command a second time, LCM terminatesimmediately, without waiting for scheduled actions to complete.
E60155-01 • Revision 01 41
Using the MVS MODIFY Command to Monitor andControl LCM AgentThe LCM Agent also uses the MVS MODIFY command. For example, to display LCMAgent status, enter:
f lcmagent,display
To change the LCM Agent maximum concurrent client connections, enter:
f lcmagent,maxconn nn
42 LCM Quick Reference • Revision 01 • E60155-01
LCM Operator Commands
DISPLAY Command
PAUSE Command
REDIRECT Command
E60155-01 • Revision 01 Chapter 2 43
RESUME Command
44 LCM Quick Reference • Revision 01 • E60155-01
CHAPTER 3
LCM 7.2 Field Tables
The following sections contain information about the LCM 7.1 Field Tables:
■ “ACTION Statement WHEN Fields” on page 46
■ “SET METHOD Statement WHEN Fields” on page 77
■ “REPORT LSM Statement Fields” on page 106
■ “REPORT MVC_VTV Statement Fields” on page 109
■ “REPORT VOLUME Statement Fields” on page 110
■ “General Fields” on page 156
■ “Fields Specific to TMS CA1” on page 189
■ “Fields Specific to TMS CTT” on page 201
■ “Fields Specific to TMS Custom” on page 211
■ “Fields Specific to TMS Open” on page 217
■ “Fields Specific to TMS TLMS” on page 223
E60155-01 • Revision 01 45
ACTION Statement WHEN FieldsTABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
BAAbdflg char TLMS TLMS-specific abend flag.
BAActive int TLMS TLMS-specific active file count.
BAAscbse char TLMS TLMS-specific associated base.
BAAscvol char TLMS TLMS-specific associated volume.
BABlkcnt int TLMS TLMS-specific block count.
BABlksiz int TLMS TLMS-specific block size.
BABuydat date TLMS TLMS-specific purchase date.
BACdsexp date TLMS TLMS-specific highest IBM expiration date on volume.
BACdsflg char TLMS TLMS-specific controlling data set flag.
BACdskep date TLMS TLMS-specific highest keep date on volume.
BACdsseq int TLMS TLMS-specific controlling data set sequence number.
BAChnvol char TLMS TLMS-specific 1st volume in chain.
BACkptkn char TLMS TLMS-specific check point taken (Y=Yes; B=No).
BAClncnt int TLMS TLMS-specific cleanings since certified.
BAClndat date TLMS TLMS-specific clean date.
BACpusmf char TLMS TLMS-specific creation CPU SMF ID.
BACredat date TLMS TLMS-specific create date.
BACreddn char TLMS TLMS-specific creation ddname.
BACredev char (alternate) TLMS TLMS-specific creation drive.
BACrejob char TLMS TLMS-specific creation jobname.
BACrepgm char TLMS TLMS-specific creation program name.
BACrestp char TLMS TLMS-specific creation stepname.
BACretim time TLMS TLMS-specific time of day the volume was created.
46 LCM Quick Reference • Revision 01 • E60155-01
BACrtcnt int TLMS TLMS-specific total certifications.
BACrtdat date TLMS TLMS-specific certification date.
BADamcde char TLMS TLMS-specific damaged code.
BADen char TLMS TLMS-specific density.
BADescde char TLMS TLMS-specific destroyed code.
BADesdat date TLMS TLMS-specific destroyed date.
BADsn char TLMS TLMS-specific data set name.
BAErgcnt int TLMS TLMS-specific current erase gaps on volume.
BAErgmax int TLMS TLMS-specific max erase gaps on volume.
BAExpdat date TLMS TLMS-specific IBM expiration date for data set.
BAFilcnt int TLMS TLMS-specific file count.
BAFilseq int TLMS TLMS-specific file sequence in chain.
BAFlg001 int TLMS TLMS-specific reserved for CA-1 FLG001.
BAFlg003 int TLMS TLMS-specific reserved for CA-1 FLG003.
BAFlg004 int TLMS TLMS-specific reserved for CA-1 FLG004.
BAFlg005 int TLMS TLMS-specific reserved for TLMS FLG005.
BAFlg006 int TLMS TLMS-specific reserved for TLMS FLG006.
BAKepdat date TLMS TLMS-specific keep date for data set.
BALabtyp char TLMS TLMS-specific label type.
BALasdat date TLMS TLMS-specific last used date.
BALasdev char (alternate) TLMS TLMS-specific last used drive.
BALasjob char TLMS TLMS-specific last used jobname.
BALoc char TLMS TLMS-specific volume location.
BALoscde char TLMS TLMS-specific lost code.
BAMds1st char (alternate) TLMS TLMS-specific multi-dataset first chain pointer.
BAMdslst char (alternate) TLMS TLMS-specific multi-dataset last chain pointer.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 47
BAMovdat date TLMS TLMS-specific date volume moved.
BAMvlcnt int TLMS TLMS-specific count of volumes in BAMvltab.
BAMvlseq1 int TLMS TLMS-specific multi-volume sequence number 1.
BAMvlseq2 int TLMS TLMS-specific multi-volume sequence number 2.
BAMvlseq3 int TLMS TLMS-specific multi-volume sequence number 3.
BAMvlseq4 int TLMS TLMS-specific multi-volume sequence number 4.
BAMvlseq5 int TLMS TLMS-specific multi-volume sequence number 5.
BAMvlvol1 char TLMS TLMS-specific multi-volume chain serial number 1.
BAMvlvol2 char TLMS TLMS-specific multi-volume chain serial number 2.
BAMvlvol3 char TLMS TLMS-specific multi-volume chain serial number 3.
BAMvlvol4 char TLMS TLMS-specific multi-volume chain serial number 4.
BAMvlvol5 char TLMS TLMS-specific multi-volume chain serial number 5.
BAOutsrv char TLMS TLMS-specific out of service code. Contains BALoscde,BADamcde, and BADescde.
BARecsiz int TLMS TLMS-specific logical record length.
BARederr int TLMS TLMS-specific current temporary read errors.
BARfm char TLMS TLMS-specific record format.
BARtncnt1 int TLMS TLMS-specific retention count for retention entry 1.
BARtncnt2 int TLMS TLMS-specific retention count for retention entry 2.
BARtncnt3 int TLMS TLMS-specific retention count for retention entry 3.
BARtncnt4 int TLMS TLMS-specific retention count for retention entry 4.
BARtncnt5 int TLMS TLMS-specific retention count for retention entry 5.
BARtncnt6 int TLMS TLMS-specific retention count for retention entry 6.
BARtndev char TLMS TLMS-specific box or cabinet/slot.
BARtnLoc1 char TLMS TLMS-specific user retention location for retention entry1.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
48 LCM Quick Reference • Revision 01 • E60155-01
BARtnLoc2 char TLMS TLMS-specific user retention location for retention entry2.
BARtnLoc3 char TLMS TLMS-specific user retention location for retention entry3.
BARtnLoc4 char TLMS TLMS-specific user retention location for retention entry4.
BARtnLoc5 char TLMS TLMS-specific user retention location for retention entry5.
BARtnLoc6 char TLMS TLMS-specific user retention location for retention entry6.
BARtnptr char TLMS TLMS-specific offset of active retention entry.
BARtnsrc char TLMS TLMS-specific retention source. ' ' (blank) = No retentiondata; '1' = From RMF; '2' = From JCL; '3' = From manualupdate.
BARtntyp1 char TLMS TLMS-specific user retention type for retention entry 1.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used; '9'= Expiration date.
BARtntyp2 char TLMS TLMS-specific user retention type for retention entry 2.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used; '9'= Expiration date.
BARtntyp3 char TLMS TLMS-specific user retention type for retention entry 3.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used; '9'= Expiration date.
BARtntyp4 char TLMS TLMS-specific user retention type for retention entry 4.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used; '9'= Expiration date.
BARtntyp5 char TLMS TLMS-specific user retention type for retention entry 5.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used; '9'= Expiration date.
BARtntyp6 char TLMS TLMS-specific user retention type for retention entry 6.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used; '9'= Expiration date.
BAScrdat date TLMS TLMS-specific date volume scratched.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 49
BAScruid char TLMS TLMS-specific scratched by ID. '1' = TRS; '2' = JCL; '3' =Manual; '4' = External data manager.
BaseName char TMS The controlling data set name of the volume. If the dataset is a member of a Generation Data Group, only thebase name (no .GnnnnVnn) is included.
BASmsmgt char TLMS TLMS-specific SMS management class
BASpcchn char TLMS TLMS-specific special chaining (chained for moves).
BASpnflg char TLMS TLMS-specific spanned data set flag (1=spanned).
BASrvscr char TLMS TLMS-specific service/scratch indicator. '0' = Skippedsegment record; '1' = In service/Non scratch; '2' = Inservice/Scratch; '3' = Out service/Non scratch; '4' = OutService/Scratch.
BATaplen int TLMS TLMS-specific tape length.
BATapmod char TLMS TLMS-specific track recording technique.
BATaptyp char TLMS TLMS-specific tape type.
BATrspro char TLMS TLMS-specific TRS has processed this volume.
BAUnisrt int TLMS TLMS-specific sort unique code.
BAUsebuy int TLMS TLMS-specific uses since purchased.
BAUsecln int TLMS TLMS-specific uses since cleaned.
BAUsecrt int TLMS TLMS-specific uses since certified.
BAUsr001 char TLMS TLMS-specific user data. (Defaults to job accounting -TCB).
BAUsr002 char TLMS TLMS-specific user data. (Defaults to programmer name- TCB).
BAUsr003 char TLMS TLMS-specific user data area.
BAVender char TLMS TLMS-specific user updated manufacturer code.
BAVol1st char (alternate) TLMS TLMS-specific multi-volume first volume serial numberpointer.
BAVolcnt int TLMS TLMS-specific volume count.
BAVollst char (alternate) TLMS TLMS-specific multi-volume last chain pointer.
BAVolown char TLMS TLMS-specific volume owner.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
50 LCM Quick Reference • Revision 01 • E60155-01
BAVolseq int TLMS TLMS-specific volume sequence number.
BAVolser char TLMS TLMS-specific volume serial number
ClassificationCLS
char (alternate) HSC,MVC,TMS,VTV
Classification of the volume.
BadScratchVolumes marked defective and scratch in TMSCleanVolumes with the HSC cleaning prefixExpiredVolumes marked not scratch and expired in TMSNonScratchVolumes not scratch, badscratch, expired, or cleanScratchVolumes available for receiving new tape data sets
CleanCLN
bool LCM This volume is a cleaning cartridge.
Copy int TMS Copy number of the volume. A value of 1 refers to themost recently created copy of the data set according tothe tape management system, 2 refers to the next mostrecently created copy, and so on.
CreatingTMSDriveCTDRIVE
char (alternate) TMS The unit address of the tape drive on which the tape dataset was created, printed as a hexadecimal characterstring.
CreationDateCDATE
date MVC,TMS,VTV
The date the volume was created. The first available fieldof the following determines the creation date:CreationTMSDate, CreationVTVDate, CreationMVCDate.
CreationJobNameCJOBNAMEJOBNAME
char TMS The JCL job name that created the volume.
CreationMVCDateCMDATE
date MVC The date the volume was created as recorded by VSM.
CreationMVCTimeCMTIME
time MVC The time of day the volume was created as recorded byVSM.
CreationStepNameCSTEPNAMESTEPNAME
char TMS The JCL step name that created the volume.
CreationTimeCTIME
time MVC,TMS,VTV
The time of day the volume was created. The firstavailable field of the following determines the creationtime: CreationTMSTime, CreationVTVTime,CreationMVCTime.
CreationTMSDateCTDATE
date TMS The date the volume was created as recorded in theassociated tape management system.
CreationTMSTimeCTTIME
time TMS The time of day the volume was created as recorded inthe associated tape management system.
CreationVTVDateCVDATE
date VTV The date the volume was created as recorded by VSM.
CreationVTVTimeCVTIME
time VTV The time of day the volume was created as recorded byVSM.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 51
CTAccount char ControlT Control-T-specific accounting information
CTActiveds int ControlT Control-T-specific number of active labels on volume.
CTBlksize int ControlT Control-T-specific block size.
CTBlockct int ControlT Control-T-specific block count.
CTBoxid char ControlT Control-T-specific box ID.
CTChkindt date ControlT Control-T-specific volume check-in date.
CTClncount int ControlT Control-T-specific clean count
CTCrecpu char ControlT Control-T-specific creation CPU name.
CTCreddn char ControlT Control-T-specific creation DD name.
CTCredt date ControlT Control-T-specific creation date.
CTCrejbn char ControlT Control-T-specific creation job name.
CTCrepgm char ControlT Control-T-specific creation program name.
CTCrestep char ControlT Control-T-specific creation stepname.
CTCretm time ControlT Control-T-specific creation time
CTCreuad char (alternate) ControlT Control-T-specific creation unit address.
CTDdsexpd1 date ControlT Control-T-specific first expiration date.
CTDdsexpd2 date ControlT Control-T-specific second expiration date.
CTDdsexpd3 date ControlT Control-T-specific third expiration date.
CTDeleted bool ControlT Control-T-specific volume marked as deleted.
CTDsname char ControlT Control-T-specific data set name.
CTDsvolser char ControlT Control-T-specific first data set begins on volume.
CTDyndef bool ControlT Control-T-specific volume dynamically added.
CTEdm bool ControlT Control-T-specific volume managed by an External DataManager.
CTExprtrn date ControlT Control-T-specific expected return date from outlocation.
CTExtdel bool ControlT Control-T-specific volume will be deleted when expired.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
52 LCM Quick Reference • Revision 01 • E60155-01
CTExternal bool ControlT Control-T-specific external volume.
CTFirstvol char ControlT Control-T-specific first volume in the multi-volumegroup.
CTHold bool ControlT Control-T-specific volume is in the main library due torecall operation.
CTInatl bool ControlT Control-T-specific volume resides inside a robotic tapelibrary.
CTInuse bool ControlT Control-T-specific volume currently in use.
CTIoerprm int ControlT Control-T-specific permanent read errors.
CTIoerprmc int ControlT Control-T-specific permanent read errors since last clean.
CTIoertmp int ControlT Control-T-specific temporary read errors.
CTIoertmpc int ControlT Control-T-specific temporary read errors since last clean
CTIoewprm int ControlT Control-T-specific permanent write errors.
CTIoewprmc int ControlT Control-T-specific permanent write errors since lastclean.
CTIoewtmp int ControlT Control-T-specific temporary write errors.
CTIoewtmpc int ControlT Control-T-specific temporary write errors since last clean.
CTLaccdt date ControlT Control-T-specific last access job date.
CTLaccjbn char ControlT Control-T-specific last job name that accessed thevolume.
CTLacctm time ControlT Control-T-specific last access job time.
CTLblnum int ControlT Control-T-specific highest label number on volume.
CTLbltyp char ControlT Control-T-specific label type
AL
AUL
BLP
NL
NSL
SL
SUL
CTLclndt date ControlT Control-T-specific last clean date.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 53
CTLibrary char ControlT Control-T-specific robotic tape library name.
CTLocation char ControlT Control-T-specific current location of volume.
CTLocseq int ControlT Control-T-specific current vault sequence number.
CTLrecl int ControlT Control-T-specific record length.
CTManvlt bool ControlT Control-T-specific volume manually moved to vault.
CTMedia char ControlT Control-T-specific media name
CTMovedate date ControlT Control-T-specific move date.
CTNextvol char ControlT Control-T-specific next volume in the multi-volumegroup.
CTNostack bool ControlT Control-T-specific volume cannot be a candidate fordynamic stacking.
CTOut bool ControlT Control-T-specific volume outside the main library.
CTPendscr bool ControlT Control-T-specific pending scratch status.
CTPendvlt bool ControlT Control-T-specific pending vault.
CTPrevvol char ControlT Control-T-specific previous volume in the multi-volumegroup.
CTPvlt bool ControlT Control-T-specific potential vault.
CTRecall bool ControlT Control-T-specific volume will recall back to mainlibrary.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
54 LCM Quick Reference • Revision 01 • E60155-01
CTRecfm char ControlT Control-T-specific record format.
A
B
D
F
FB
FBA
FBM
FBS
M
S
U
V
VB
VBA
VBM
VBS
VS
CTRecfrom char ControlT Control-T-specific vault name recalled from.
CTRecreate bool ControlT Control-T-specific dataset recreated.
CTReturnvl bool ControlT Control-T-specific volume returned from vault.
CTRetvltdt date ControlT Control-T-specific date to return to vault.
CTScratch bool ControlT Control-T-specific volume scratch status.
CTScrdt date ControlT Control-T-specific volume scratch date.
CTSlname char ControlT Control-T-specific SL name.
CTSlotnum int ControlT Control-T-specific slot number
CTSmsmc char ControlT Control-T-specific SMS management class.
CTSmssg char ControlT Control-T-specific SMS storage group.
CTVabend bool ControlT Control-T-specific incomplete data set on volume.
CTVault char ControlT Control-T-specific first vault name.
CTVault2 char ControlT Control-T-specific second vault name.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 55
CTVault3 char ControlT Control-T-specific third vault name.
CTVaulted bool ControlT Control-T-specific vaulted.
CTVendor char ControlT Control-T-specific volume's vendor name
CTVformat char ControlT Control-T-specific volume format
CTVfreekb int ControlT Control-T-specific free kilo-bytes on volume.
CTVlrstrt bool ControlT Control-T-specific volume processed under MVS restart.
CTVltentdt date ControlT Control-T-specific vault entry date.
CTVltexpdt date ControlT Control-T-specific vault expiration date.
CTVoledmid char ControlT Control-T-specific volume's External Data Manager ID.
CTVolexcp int ControlT Control-T-specific EXCP Count
CTVolexpdt date ControlT Control-T-specific volume expiration date.
CTVolodesc char ControlT Control-T-specific volume user description.
CTVolowner char ControlT Control-T-specific volume owner
CTVolseq int ControlT Control-T-specific volume sequence number in a multi-volume group.
CTVolser char ControlT Control-T-specific volume serial number.
CTVolsnum int ControlT Control-T-specific number volumes data set resides on.
CTVoltype char ControlT Control-T-specific volume type.
L
P
CTVolusect int ControlT Control-T-specific volume use count since last scratch.
CTVolusetc int ControlT Control-T-specific volume use count.
CTVstkgrp char ControlT Control-T-specific stacking group name.
CTVusedkb int ControlT Control-T-specific Used kilo-bytes on volume.
CycleDateCYDATE
date TMS The date used by LCM for CYCLESOON processing. Ifmissing, LCM does not perform CYCLESOONprocessing on this volume.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
56 LCM Quick Reference • Revision 01 • E60155-01
DataSetIdentifierDSID
char TMS The most specific matching data set identifier found forthe data set name on the Data Set tab of the Methodsfolder (Explorer) or a DATASET statement (ParameterFile).
DataSetNameDSN
char TMS The controlling data set name of the volume. If the dataset is a member of a Generation Data Group, the.GnnnnVnn qualifier is included.
DaysSinceCreationCDAYS
int MVC,TMS,VTV
The number of days since the data set was created. Thefirst available field of the following determines the dayssince creation: DaysSinceCreationTMS,DaysSinceCreationMVC, DaysSinceCreationVTV.
DaysSinceCreationMVCCMDAYS
int MVC The number of days since the data set was created asrecorded by VSM.
DaysSinceCreationTMSCTDAYS
int TMS The number of days since the data set was created asrecorded in the associated tape management system.
DaysSinceCreationVTVCVDAYS
int VTV The number of days since the data set was created asrecorded by VSM.
DaysSinceEnterEDAYS
int HSC The number of days since the volume was entered intoan LSM. If all volumes of a multi-volume data set arecovered by the same Management Method, the mostrecent enter day for any volume is used by LCM for allvolumes in the multi-volume data set.
DaysSinceLocationLDAYSLOCDAYS
int TMS The number of days since the tape was moved to a tapestorage location.
DaysSinceMountMDAYS
int HSC The number of days since the HSC last mounted thevolume.
DaysSinceReferenceRDAYS
int HSC,MVC,TMS,VTV
The number of days since reference for the volume asused by LCM. The first available field of the followingdetermines the reference day: DaysSinceReferenceTMS,DaysSinceReferenceVTV, DaysSinceReferenceMVC,DaysSinceMount, DaysSinceSelect. If all volumes of amulti-volume data set are covered by the sameManagement Method, the most recent reference day forany volume is used by LCM for all volumes in the multi-volume data set.
DaysSinceReferenceMVCRMDAYS
int MVC The number of days since reference as recorded by VSMfor an MVC (Multiple Volume Cartridge)
DaysSinceReferenceTMSRTDAYS
int TMS The number of days since reference as recorded in theassociated tape management system for volumes beingtreated as a unit (Multi-volume support).
DaysSinceReferenceVTVRVDAYS
int VTV The number of days since reference as recorded by VSMfor a VTV (Virtual Tape Volume)
DaysSinceSelectSDAYS
int HSC The number of days since the volume was selected bythe HSC.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 57
DaysTillCycleCYDAYSDAYSTILLEXPIREXDAYS
int TMS The number of days LCM uses for CYCLESOONprocessing. If missing, LCM will not performCYCLESOON processing on this volume.
Deleted bool TMS The volume is marked deleted in the tape managementsystem. Note: The value of this field is false for allvolumes known to LCM unless: Explorer: The checkboxon the Deleted tab of the TMS object is not checked;Parameter File: the NODELETECHECK parameter isspecified on the TMS statement.
Encrypted bool HSC This field is valid only if LCM is running with NCS 6.2or later.This volume is encrypted.
EnterDateENDATE
date HSC The date the volume was entered into an LSM. If allvolumes of a multi-volume data set are covered by thesame Management Method, the most recent enter date ofany volume is used by LCM for all volumes in the multi-volume data set.
EnterTimeENTIME
time HSC The time of day the volume was entered.
Errant bool HSC The HSC has marked this volume errant. Requires HSCPTF L1H10CC (HSC 4.0) or L1H10CE (HSC 4.1) toproduce accurate information.
ExLblReadableEXLBLRD
bool HSC The cartridge external label is OCR readable.
ExpireDateEXPDTXDATE
date TMS The date the volume will expire based on the expirationdate in the tape management system. Special expiredates are: AGE/nnn - Expires nnn days from create ormove date; CATLG - Expires when the data set name nolonger exists in the MVS system catalog, regardless of thekeep date; CATLG/nnn - Expires nnn days after creationand the data set no longer resides in the MVS catalog;CYCLE/nnn - Oldest data set expires after nnn cycles;FOREIGN - Foreign volume; LDATE/nnn - Expires nnndays after last used; MSG/nnn - TMS user-defined;PERM - Never expires; STATS/nnn - Never expires;USER/nnn - Never expires; ZEROS - CA-TLMS valuewas zeros; Julian date - Expires on the julian date.
ExternalLabelEXLBL
bool HSC The cartridge has an external label.
ExternallyManagedEXTERNAL
bool TMS The volume is defined to the tape management system,but its use is controlled by some other software system.
GDG bool TMS The volume is a member of a Generation Data Group.
GDGWrap bool TMS The volume is a member of a Generation Data Groupwhere the Gnnnn number has wrapped from 9999 to0001.
GenerationGEN
int TMS The relative generation number + 1, based on the tapemanagement system.
HoursSinceCreationVTVCVHOURS
int VTV The number of hours since creation as recorded by VSMfor a VTV (Virtual Tape Volume).
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
58 LCM Quick Reference • Revision 01 • E60155-01
HoursSinceReferenceVTVRVHOURS
int VTV The number of hours since reference as recorded by VSMfor a VTV (Virtual Tape Volume).
HSCScratchHSCSCR
bool HSC The status recorded by the HSC for the volume isscratch.
InitialACSIDIACSID
char (alternate) HSC,MVC
The ACS ID in which the volume resided at thebeginning of the LCM run.
InitialLSMCellILSMCELL
char (alternate) HSC The coordinates of the LSM Cell where the volumeresided at the beginning of the LCM run.
InitialLSMColumnILSMCOL
int HSC The LSM Column number where the volume resided atthe beginning of the LCM run.
InitialLSMGroupILSMGRP
char (alternate) LCM The name of the LSM Group where the volume residedat the beginning of the LCM run.
InitialLSMIDILSMID
char (alternate) HSC,MVC
The LSM ID where the volume resided at the beginningof the LCM run.
InitialLSMNameILSMNAME
char (alternate) LCM The Name of the LSM where the volume resided at thebeginning of the LCM run.
InitialLSMPanelILSMPNL
int HSC The LSM Panel number where the volume resided at thebeginning of the LCM run.
InitialLSMPanelFrozenILSMPNLFZ
bool HSC The volume resided in a frozen panel at the beginning ofthe LCM run.
InitialLSMRowILSMROW
int HSC The LSM Row number where the volume resided at thebeginning of the LCM run.
InLSM bool HSC,MVC
The volume is in an LSM at the beginning of an LCMrun.
InManagedLSMINMANLSM
bool LCM The volume is in a MANAGEd LSM at the beginning ofan LCM run.
InTMS bool TMS The volume is in a tape management system defined toLCM.
LastUsedTMSDriveLUTDRIVE
char (alternate) TMS The unit address of the tape drive on which the tape waslast used, printed as a hexadecimal character string.
LocationCodeLOCCODE
char TMS The identifier assigned to a tape volume by the tapemanagement system to identify the intended storagelocation for that volume.
LocationDateLDATELOCDATE
date TMS The date the volume was moved to the tape managementsystem's tape storage location.
LocationNameLOCNAME
char (alternate) LCM The name of the tape storage location. Location Namesare not defined to the tape management system, but areassigned by LCM from tape management systeminformation as specified by: Explorer: the Location objectCodes tab; Parameter File: the Location statement Codeparameter.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 59
Managed bool LCM The volume is covered by a MANAGE statement.
ManagementClassMGMTCLAS
char (alternate) TMS The name of the SMS Management Class for the volume.
MaxUseCount int HSC The maximum usage for a cleaning cartridge set by theVOLATTR Maxclean or MNTD Maxclean value.
MediaSourceMEDIAS
char (alternate) LCM The source of information used to determine thevolume's MediaType value.
DFLTThe media type defaulted to Standard.HSCCDSThe HSC Control Data Set.VOLDEFThe VOLATTR statements contained in the file identifiedby the HSC VOLDEF parameter.VSMVTVVSM Virtual Tape Volume information.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
60 LCM Quick Reference • Revision 01 • E60155-01
MediaTypeMEDIAMEDIAT
char (alternate) HSC,MVC,VTV
The media type of the volume.
StandardStandard length 3480 cartridge.Long3490E extended capacity cartridge.DD3A10 Gb capacity helical cartridge.DD3B25 Gb capacity helical cartridge.DD3C50 Gb capacity helical cartridge.DD3DCleaning cartridge for helical drives.STK1R9840 data cartridge.STK1UCleaning cartridge for 9840 transports.STK1YCleaning cartridge for 9840D transports.STK2PT9940A data cartridge.STK2WCleaning cartridge for T9940 transports.T10000TTSmaller-capacity 1TB T10000C cartridge.T10000TST10000 "sport" cartridge.T10000T1Full-capacity 500GB T10000A or 1TB T10000B cartridge.T10000T2Full-capacity 5TB T10000C cartridge.T10000CCT10000C cleaning cartridge.T10000CLT10000A, T10000B, or T10000C cleaning cartridge.T10000CTT10000A or T10000B cleaning cartridge.ZCART9490EE ZCART media cartridge.LTO-100GLTO 100GB capacity cartridge.LTO-200GLTO 200GB capacity cartridge.LTO-35GLTO 35GB capacity cartridge.LTO-400GLTO 400GB capacity cartridge.LTO-400WLTO 400Gb capacity WORM cartridge.LTO-800GLTO 800GB capacity cartridgeLTO-800WLTO 800GB capacity WORM cartridgeLTO-1.5TLTO 1.5TB capacity cartridge.LTO-1.5WLTO Generation 5 WORM cartridge.LTO-2.5TLTO 2.5TB capacity cartridge.LTO-2.5WLTO Generation 5 WORM cartridge.LTO-CLN1LTO cleaning type 1 cartridge.LTO-CLN2LTO cleaning type 2 cartridge.LTO-CLNULTO universal cleaning cartridge.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 61
MediaTypeMEDIAMEDIAT
SDLTSDLT 160GB cartridge.SDLT-1SDLT Generation 1 cartridge.SDLT-4SDLT Generation 4 cartridge.SDLT-S2SDLT Generation S2 cartridge.SDLT-S3SDLT Generation S3 cartridge.SDLT-S4SDLT Generation S4 cartridge.SDLTCSDLT cleaning cartridge.VIRTUALVirtual Tape Volume (VTV) in the StorageTek VirtualStorage Manager system.
MethodNameMETHODMTHMTHNAME
char (alternate) LCM The name of the Management Method assigned to thisvolume.
MountDateMDATE
date HSC The date the volume was last mounted in an LSM.
Mounted bool HSC The volume is currently mounted.
MountTimeMTIME
time HSC The time of day the volume was last mounted in an LSM.
MVC bool MVC The volume is a Multiple Volume Cartridge for VSM.
MVCAudit bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is either being audited or the audit failed. Ifthe audit failed, VTCS will not use the MVC formigration. To clear this condition, rerun the AUDITagainst this MVC.
MVCAvailableMVCAVAIL
int MVC The percentage of the MVC available for use.
MVCBroken bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has an error that should be investigated. Theerror might not make the MVC unusable, but VTCS doesnot select the MVC for migration for 12 hours after thisstatus has been set to true. After the 12 hour period, theMVC is least preferred for subsequent migrations, andrecalls from the MVC can cause VTCS to drain it. Thiserror condition can be accompanied by messagesSLS6686, SLS6687, SLS6688, SLS6690 and/or SLS6693.Any of the following conditions can cause this MVCerror: MVC corrupted by another job (other thanVTCS/VTSS). Attempt to use a read-only MVC formigration. A DDR swap failure. An RTD failure.
MVCConsolidateDate date MVC This field is valid only if LCM is running with NCS 6.2or later.The date on which the MVC was consolidated asrecorded by VSM.
MVCConsolidateTime time MVC This field is valid only if LCM is running with NCS 6.2or later.For a consolidation MVC, this field displays the time ofthe consolidation.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
62 LCM Quick Reference • Revision 01 • E60155-01
MVCConsolidation bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is a consolidation MVC.
MVCDataCheck bool MVC This field is valid only if LCM is running with NCS 6.2or later.A data check was reported for this MVC. VSM will notuse this MVC again for migration.
MVCDraining bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is being drained because of one of: 1) anautomatic drain or demand reclaim. 2) an explicitMVCDRain command, 3) The previous DRAIN requestfailed, in which case VTCS will not use the MVC formigration. To clear this condition, enter MVCDRainagainst MVC without the EJect option.
MVCEject bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is in the process of eject either because youissued MVCDRainEJect or the MVC was ejected forupdate by a RACROUTE call. The MVC will not be usedagain for migration or recall. To clear this condition, useMVCDRain against MVC without the EJect option.
MVCExport bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is an export MVC.
MVCFragmentedMVCFRAG
int MVC The percentage of the MVC that is not available due tofragmentation.
MVCFull bool MVC This field is valid only if LCM is running with NCS 6.2or later.Their is no space available on the MVC.
MVCInitialized bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has been initialized.
MVCInUse int MVC The percentage of the MVC used by valid Virtual TapeVolumes.
MVCInvalidMIR bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has an invalid MIR.
MVCLost bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC was not mounted in response to the last mountrequest. The MVC can still be used for migration, butwill not select the MVC for migration for 12 hours after itis marked lost. After the 12 hour period, the MVC will beleast preferred. This condition will clear itself the nexttime that the MVC is mounted.
MVCMaximumReached bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has reached the maximum VTVs per MVC.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 63
MVCMediaSize int MVC This field is valid only if LCM is running with NCS 6.2or later.The size in MB of the MVC. This is determined only afterVTCS has used an MVC. "UNKNOWN" appears in thisfield until VTCS migrates a VTV to the MVC.
MVCMountDate date MVC This field is valid only if LCM is running with NCS 6.2or later.The date on which the MVC was mounted, as recordedby VTSS.
MVCMountTime time MVC This field is valid only if LCM is running with NCS 6.2or later.The time the MVC was last mounted, as recorded byVTSS.
MVCPoolName char (alternate) MVC This field is valid only if LCM is running with NCS 6.2or later.MVC Pool Name from the VTCS MVCPOOL controlstatement.
MVCReadOnly bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has been marked read-only.
MVCRetired bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is retired. VTCS will recall from, but notmigrate to, the MVC. Replace the MVC as soon aspossible.
MVCStorageClassMVCSTORCLASSSTORAGECLASSSTORCLAS
char MVC This field is valid only if LCM is running with NCS 6.2or later.The VTCS Storage Class for the volume.
MVCUsableForMigration bool MVC This field is valid only if LCM is running with NCS 6.2or later.Indicates whether the MVC can be used for migration.
MVCUsededMVCTimesMount
int MVC The number of times the MVC has been mounted.
MVCVTSS char MVC This field is valid only if LCM is running with NCS 6.2or later.VTSS name where the MVC was last used.
MVCVTVCountMVCVTVCNT
int MVC_VTV The number of valid Virtual Tape Volumes on the MVC.
MVCWarrantyExpired bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC’s warranty has expired. VTCS continues to usethe MVC. You should start making plans to replace theMVC when it reaches Retired state.
NonScratchNONSCR
bool HSC,TMS
The volume is not classified as a scratch volume.
NotuseableNOUSE
bool HSC The HSC has marked this volume as not useable.
OnPullListONPL
bool LCM The volume is on a Pull List.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
64 LCM Quick Reference • Revision 01 • E60155-01
OverMaxCleanOverHSCMAXCLN
bool HSC The cleaning cartridge has exceeded its maximum usagecount.
PermanentReadErrors int TMS The number of permanent read errors for the volume.
PermanentWriteErrors int TMS The number of permanent write errors for the volume.
PullListNamePLNAME
char (alternate) LCM The name of the Pull List for the volume.
RecordingTechniqueRecTech
char HSC The recording technique associated with a volume'smedia This is the method used to record data tracks onthe tape surface for the volume.
ReferenceMVCDateRMDATE
date MVC The date on which the MVC was last referenced, asrecorded by VSM.
ReferenceTMSDateRTDATE
date TMS The date of the last reference, as recorded in theassociated tape management system, for volumes beingtreated as a unit (Multi-volume support).
ReferenceVTVDateRVDATE
date VTV The date on which the VTV was last referenced, asrecorded by VSM.
ReferenceVTVTimeRVTIME
time VTV The time of day the volume was last referenced, asrecorded by VSM.
RunName char (alternate) LCM The name of the Run object from the JCL EXECstatement Run PARM.
RunType char (alternate) LCM The RunType from the JCL EXEC statement RunTypePARM.
ScratchSCR
bool HSC,MVC,Open,TMS,VTV
The volume is classified as a scratch volume by LCM.
ScratchedSCRED
bool LCM LCM marked the volume as scratch in the HSC or VSM.
SelectCountSCOUNT
int HSC The number of times the volume has been selected by theHSC.
SelectDateSDATE
date HSC The date the volume was last selected in an LSM.
Selected bool HSC The volume is currently selected.
SelectTimeSTIME
time HSC The time of day the volume was selected by the HSC.
SerialSERVOLVOLSERVOLUME
char HSC,MVC,TMS,VTV
The 6-character identifier of a tape volume.
Serial1SER1
char TMS The 6-character identifier of the first volume of thevolume set associated with this volume.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 65
Slot char TMS The value assigned to a tape volume by the tapemanagement system to pinpoint the storage place for thevolume.
SubpoolSP
char (alternate) LCM The name of the Subpool managing a group of volumeserial numbers. This is defined in the LCM Subpoolobject (Explorer) or Subpool statement (Parameter File).
SubpoolIdSPID
char (alternate) HSC Volume subpool ID from the HSC. This will be the 13-character name of the pool if using HSC SCRPOOLstatements, or the 3-digit subpool index number if usingSLSUX03.
SubpoolLabelTypeSPLBLTYP
char (alternate) HSC Volume subpool label type from the HSC.
TapeGroupTG
char (alternate) LCM The name of the tape group of a volume. Explorer: Thisis defined on the Media tab of the Subpool object.Parameter File: This is defined in the Media parameter ofthe Subpool statement.
TemporaryReadErrors int TMS The number of temporary read errors for the volume.
TemporaryWriteErrors int TMS The number of temporary write errors for the volume.
TM#Dsnbs int CA1 CA-1-specific number of data set name blocks.
TM128trk bool CA1 CA-1-specific recording technique. x'E8' indicates Trk3590 cartridge tape.
TM18trk bool CA1 CA-1-specific recording technique. x'C0' indicates 3480cartridge tape - 18 tracks.
TM3590 bool CA1 CA-1-specific recording density. x'E8' indicates 3590cartridge tape.
TM36Trk bool CA1 CA-1-specific recording technique. x'E0' indicates 3490cartridge tape - 36 tracks.
TM36trk2 bool CA1 CA-1-specific recording technique. x'E1' indicates 3490Ecartridge tape - 36 tracks (extended length).
TM38000 bool CA1 CA-1-specific recording density. x'E3' indicates 38K bpi(cartridge).
TM38KC bool CA1 CA-1-specific recording density. x'E7' indicates 38K bpi(cartridge-compacted).
TM9trk bool CA1 CA-1-specific recording technique. x'80' indicates ninetrack tape.
TMAbend bool CA1 CA-1-specific internal flag bit x'10'. Volume closed byabend.
TMActvl1 char CA1 CA-1-specific actual internal volser
TMActvl2 char CA1 CA-1-specific actual internal volser
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
66 LCM Quick Reference • Revision 01 • E60155-01
TMAcvoli bool CA1 CA-1-specific internal flag4 bit x'40'. Actual volser in use.
TMAdsnb int CA1 CA-1-specific address (relative to BASE in TMSCTL#2) offirst DSNB record associated with this volume record.
TMAldsnb int CA1 CA-1-specific address (relative to BASE in TMSCTL#2) oflast DSNB record associated with this volume record.
TMB1Dis int CA1 CA-1-specific B1 security disclosure label.
TMB1Int int CA1 CA-1-specific B1 security integrity label.
TMBadtap bool CA1 CA-1-specific internal flag3 bit x'80'. CA-9/R+ indicatedbad tape, do not mount for scratch.
TMBlkcnt int CA1 CA-1-specific data set block count.
TMBlksi int CA1 CA-1-specific maximum block size.
TMBthdt date CA1 CA-1-specific date tape was first used.
TMCatlog bool CA1 CA-1-specific internal flag2 bit x'80'. Data set was onMVS catalog.
TMClean bool CA1 CA-1-specific internal flag bit x'08'. Volume listed to becleaned.
TMClncnt int CA1 CA-1-specific number of times tape cleaned.
TMClosed bool CA1 CA-1-specific internal flag bit x'40'. Volume closednormally.
TMCpgm char CA1 CA-1-specific creating program name.
TMCrtdt date CA1 CA-1-specific creation date.
TMCrtti time CA1 CA-1-specific creation time.
TMCruni char (alternate) CA1 CA-1-specific address of creation unit.
TMDatcln date CA1 CA-1-specific date tape was last cleaned.
TMDdname char CA1 CA-1-specific creating ddname.
TMDegau bool CA1 CA-1-specific internal flag4 bit x'10'. Tape has beendegaussed.
TMDelet bool CA1 CA-1-specific internal flag bit x'02'. Volume in delete(inactive) status
TMDen char (alternate) CA1 CA-1-specific recording density.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 67
TMDfault bool CA1 CA-1-specific internal flag bit x'01'. Volume eligible forRDS override.
TMDfexu bool CA1 CA-1-specific internal flag3 bit x'04'. Default expirationdate used at open output.
TMDsn char CA1 CA-1-specific data set name.
TMDsn17 char CA1 CA-1-specific last 17 bytes of dsn.
TMDynam bool CA1 CA-1-specific internal flag3 bit x'10'. Controlled by CA-DYNAM/T.
TMEcatlg bool CA1 CA-1-specific internal flag2 bit x'08'. Expired fromcatalog control (TMSCTLG).
TMEcycle bool CA1 CA-1-specific internal flag2 bit x'04'. Expired from cyclecontrol (TMSCYCLE).
TMEdmid char CA1 CA-1-specific external data manager id.
TMEdmtap bool CA1 CA-1-specific internal flag3 bit x'20'. Controlled byexternal data manager.
TMEldate bool CA1 CA-1-specific internal flag bit x'02'. Expired from LDATEcontrol (TMSCLEAN).
TMErase bool CA1 CA-1-specific internal flag3 bit x'08'. Data set eraserequired.
TMEsms bool CA1 CA-1-specific internal flag4 bit x'80'. Tape expired bySMS max retention rules.
TMEtms bool CA1 CA-1-specific internal flag bit x'01'. Expired by TMS.
TMExpdt date CA1 CA-1-specific expiration date.
TMFilcpy bool CA1 CA-1-specific internal flag3 bit x'01'. Created by CA-1/Copycat.
TMFlag1 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag2 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag3 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag4 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag5 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag6 char (alternate) CA1 CA-1-specific internal flag byte.
TMFrsvol char CA1 CA-1-specific first volser of data set.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
68 LCM Quick Reference • Revision 01 • E60155-01
TMIntal bool CA1 CA-1-specific internal flag1 bit x'80'. Internal fieldchanged by user.
TMInuse bool CA1 CA-1-specific internal flag4 bit x'02'. Tape is in use forRTS (Real Time Stacking).
TMIscat bool CA1 CA-1-specific internal flag4 bit x'08'. File on OS catalog.
TMJobnm char CA1 CA-1-specific creating job name.
TMLasusd date CA1 CA-1-specific date last used.
TMLasusj char CA1 CA-1-specific job name which last used volume.
TMLasust time CA1 CA-1-specific time last used.
TMLpgm char CA1 CA-1-specific last used program name.
TMLrecl int CA1 CA-1-specific logical record length.
TMLtype char CA1 CA-1-specific tape label type. One of SL, SUL, NL, NSL,BLP, AL1, AU1, AL3, AU3.
TMNostak bool CA1 CA-1-specific internal flag4 bit x'01'. No further stackingallowed.
TMNrs bool CA1 CA-1-specific internal flag4 bit x'04'. Non-resident tape.
TMNxtVol char CA1 CA-1-specific next volser of data set.
TMOutar char CA1 CA-1-specific location id of out-of-area tape.
TMOutdat date CA1 CA-1-specific date tape was marked out-of-area.
TMOutput bool CA1 CA-1-specific internal flag2 bit x'40'. Volume opened foroutput.
TMPrerrc int CA1 CA-1-specific number of permanent read errors sincecleaned.
TMPrerri int CA1 CA-1-specific number of permanent read errors sinceinitialized.
TMPrvvol char CA1 CA-1-specific previous volser of data set.
TMPwerrc int CA1 CA-1-specific number of permanent write errors sincecleaned.
TMPwerri int CA1 CA-1-specific number of permanent write errors sinceinitialized.
TMRecfm char CA1 CA-1-specific record format. One of V, VA, VS, VB, VBM,VBA, VBS, F, FM, FA, FS, FB, FBM, FBA, FBS, U.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 69
TMRedwd1 bool CA1 CA-1-specific recording technique. x'E4' indicatesRedwood 12.5G capacity.
TMRedwd2 bool CA1 CA-1-specific recording technique. x'E5' indicatesRedwood 25G capacity.
TMRedwd3 bool CA1 CA-1-specific recording technique. x'E6' indicatesRedwood 50G capacity.
TMRelevm bool CA1 CA-1-specific internal flag3 bit x'40'. Tape released byexternal vault manager.
TMReuse bool CA1 CA-1-specific internal flag2 bit x'20'. Data set recreated.
TMRobid int CA1 CA-1-specific robotic device indicator.
TMRobty int CA1 CA-1-specific tape in robotic device.
TMSBad bool Open,TMS
The volume has been marked defective in the tapemanagement system.
TMScrtch bool CA1 CA-1-specific internal flag bit x'04'. Volume in scratchstatus.
TMSExpired bool Open,TMS
The volume is marked expired in the tape managementsystem.
TMSlot char CA1 CA-1-specific vault slot number.
TMSmsmc char CA1 CA-1-specific SMS management class.
TMSName char (alternate) LCM The name of the tape management system defined on theTMS statement.
TMSScratchTMSSCR
bool TMS The tape management system has the scratch flag set forthis volume.
TMStack bool CA1 CA-1-specific internal flag5 bit x'80'. Tape has been usedby RTS.
TMStpnam char CA1 CA-1-specific creating step name.
TMSUse int Open,TMS
The number of times the volume has been used.
TMTempds bool CA1 CA-1-specific internal flag2 bit x'10'. Temporary data set.
TMTrerrc int CA1 CA-1-specific number of temporary read errors sincecleaned.
TMTrerri int CA1 CA-1-specific number of temporary read errors sinceinitialized.
TMTrtch char (alternate) CA1 CA-1-specific recording technique.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
70 LCM Quick Reference • Revision 01 • E60155-01
TMTwerrc int CA1 CA-1-specific number of temporary write errors sincecleaned.
TMTwerri int CA1 CA-1-specific number of temporary write errors sinceinitialized.
TMUcount int CA1 CA-1-specific number of times tape opened sincebirthdate.
TMUltif bool CA1 CA-1-specific internal flag3 bit x'02'. Additional filesexist in volume set.
TMUpdate bool CA1 CA-1-specific internal flag bit x'20'. Volume recordupdated by user.
TMUsecln int CA1 CA-1-specific use count at last cleaning.
TMUserTMAcct
char CA1 CA-1-specific user job accounting area.
TMUsuni char (alternate) CA1 CA-1-specific address of unit last used.
TMVabtch int CA1 CA-1-specific id of last CA-1 program to update record.
TMVacode int CA1 CA-1-specific audit code.
TMVacpu char CA1 CA-1-specific id of CPU used for last update.
TMVadate date CA1 CA-1-specific date of last update.
TMVaflg1 int CA1 CA-1-specific audit flag.
TMVahook int CA1 CA-1-specific id of last intercept to update record.
TMVatime time CA1 CA-1-specific time of last update.
TMVauser char CA1 CA-1-specific id of last user to update record.
TMVendor char CA1 CA-1-specific tape vendor name.
TMVolseq int CA1 CA-1-specific volume sequence number.
TMVolser char CA1 CA-1-specific volume serial number.
TMVsr bool CA1 CA-1-specific internal flag4 bit x'20'. Vault specificrequest.
UnscratchedUNSCRED
bool LCM LCM marked the volume as not scratch in the HSC orVSM.
UserBool1 bool Custom,Open
User-defined Boolean field for a volume.
UserBool10 bool Custom,Open
User-defined Boolean field for a volume.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 71
UserBool2 bool Custom,Open
User-defined Boolean field for a volume.
UserBool3 bool Custom,Open
User-defined Boolean field for a volume.
UserBool4 bool Custom,Open
User-defined Boolean field for a volume.
UserBool5 bool Custom,Open
User-defined Boolean field for a volume.
UserBool6 bool Custom,Open
User-defined Boolean field for a volume.
UserBool7 bool Custom,Open
User-defined Boolean field for a volume.
UserBool8 bool Custom,Open
User-defined Boolean field for a volume.
UserBool9 bool Custom,Open
User-defined Boolean field for a volume.
UserChar1 char Custom,Open
User-defined character field for a volume.
UserChar10 char Custom,Open
User-defined character field for a volume.
UserChar2 char Custom,Open
User-defined character field for a volume.
UserChar3 char Custom,Open
User-defined character field for a volume.
UserChar4 char Custom,Open
User-defined character field for a volume.
UserChar5 char Custom,Open
User-defined character field for a volume.
UserChar6 char Custom,Open
User-defined character field for a volume.
UserChar7 char Custom,Open
User-defined character field for a volume.
UserChar8 char Custom,Open
User-defined character field for a volume.
UserChar9 char Custom,Open
User-defined character field for a volume.
UserDate1 date Custom,Open
User-defined date field for a volume.
UserDate10 date Custom,Open
User-defined date field for a volume.
UserDate2 date Custom,Open
User-defined date field for a volume.
UserDate3 date Custom,Open
User-defined date field for a volume.
UserDate4 date Custom,Open
User-defined date field for a volume.
UserDate5 date Custom,Open
User-defined date field for a volume.
UserDate6 date Custom,Open
User-defined date field for a volume.
UserDate7 date Custom,Open
User-defined date field for a volume.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
72 LCM Quick Reference • Revision 01 • E60155-01
UserDate8 date Custom,Open
User-defined date field for a volume.
UserDate9 date Custom,Open
User-defined date field for a volume.
UserInt1 int Custom,Open
User-defined integer field for a volume.
UserInt10 int Custom,Open
User-defined integer field for a volume.
UserInt2 int Custom,Open
User-defined integer field for a volume.
UserInt3 int Custom,Open
User-defined integer field for a volume.
UserInt4 int Custom,Open
User-defined integer field for a volume.
UserInt5 int Custom,Open
User-defined integer field for a volume.
UserInt6 int Custom,Open
User-defined integer field for a volume.
UserInt7 int Custom,Open
User-defined integer field for a volume.
UserInt8 int Custom,Open
User-defined integer field for a volume.
UserInt9 int Custom,Open
User-defined integer field for a volume.
UserTime1 time Custom,Open
User-defined time field for a volume.
UserTime10 time Custom,Open
User-defined time field for a volume.
UserTime2 time Custom,Open
User-defined time field for a volume.
UserTime3 time Custom,Open
User-defined time field for a volume.
UserTime4 time Custom,Open
User-defined time field for a volume.
UserTime5 time Custom,Open
User-defined time field for a volume.
UserTime6 time Custom,Open
User-defined time field for a volume.
UserTime7 time Custom,Open
User-defined time field for a volume.
UserTime8 time Custom,Open
User-defined time field for a volume.
UserTime9 time Custom,Open
User-defined time field for a volume.
VaultAssignmentDate date HSC The Date the volume was first assigned to the ExternalVault.
VaultAssignmentTime time HSC Time the volume was first assigned to the External Vault.
VaultName char HSC The name of the vault.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 73
VaultReturnDate date HSC The Date the volume can be returned to the ExternalVault.
VaultReturnTime time HSC Time the volume can be returned to the External Vault.
VaultSlot char HSC The assigned External Vault Slot value.
VolumeSequenceNumberVOLSEQ
int TMS The volume sequence number of the volume.
VTV bool VTV The volume is a Virtual Tape Volume (VTV), as reportedby VSM.
VTVCompressionPercentage int VTV This field is valid only if LCM is running with NCS 6.2or later.This is the difference between the uncompressed andcompressed VTV size expressed as a percentage of theuncompressed VTV size. For example, if a 100MB VTVcompresses to 40MB, then the compression percentagewill be given as 60%. A compression of 0% indicates thatno compression was possible on the VTV.
VTVConsolidated bool VTV This field is valid only if LCM is running with NCS 6.2or later.Indicates whether a VTV is currently consolidated.
VTVDuplexed bool VTV The VTV has at least 2 copies.
VTVFenced bool VTV This field is valid only if LCM is running with NCS 6.2or later.The VTV's state is unknown to VTSS.
VTVInitialized bool VTV This field is valid only if LCM is running with NCS 6.2or later.The VTV has been initialized by VTSS.
VTVInvalidVTVDELVTVDELETEDVTVINV
bool VTV The VTV is invalid in VSM.
VTVManagementClassVTVMGMTCLASVTVMGTCLASS
char VTV The VSM management class for the VTV.
VTVMaximumSize int VTV This field is valid only if LCM is running with NCS 6.2or later.The maximum size of the VTV is 32GB.
VTVMigratedVTVMIG
bool VTV The VTV is migrated in VSM.
VTVMountedVTVMNTD
bool VTV The VTV is mounted according to VSM.
VTVMVCID1 char VTV The MVC volser on which the VTV resides.
VTVMVCID2 char VTV The MVC volser on which a duplicate or consolidationcopy of the VTV resides. Note: If the VTV is consolidatedduring an LCM run, the value of this field will beupdated after the consolidation is performed. ThePOSTACTION value will reflect the consolidation MVCfor this VTV.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
74 LCM Quick Reference • Revision 01 • E60155-01
VTVMVCID3 char VTV The MVC volser on which a duplicate or consolidationcopy of the VTV resides.
VTVMVCID4 char VTV The MVC volser on which a duplicate or consolidationcopy of the VTV resides.
VTVNewCreate bool VTV This field is valid only if LCM is running with NCS 6.2or later.Indicates whether the VTV was newly created when itwas last resident.
VTVOwningTapePlex char VTV The owning TapePlex for this VTV.
VTVPageSize char VTV The VTV Page Size
Large
Standard
VTVRecallDate date VTV This field is valid only if LCM is running with NCS 6.2or later.Date VTV was recalled to the VTSS buffer.
VTVRecallTime time VTV This field is valid only if LCM is running with NCS 6.2or later.Time VTV was recalled to the VTSS buffer.
VTVReplicationStatus char VTV This field is valid only if LCM is running with NCS 6.2or later.Status of VTV replication.
CReplication has completed.RReplication is required but not startedSReplication has started
VTVResident bool VTV This field is valid only if LCM is running with NCS 6.2or later.Indicates whether a VTV is resident in a VTSS.
VTVScratchVTVSCR
bool VTV The VTV is scratch, as recorded by VSM.
VTVSizeCompressed int VTV This field is valid only if LCM is running with NCS 6.2or later.The actual compressed size of the VTV in megabytes.
VTVSizeUncompressedVTVMediaSize
int VTV This field is valid only if LCM is running with NCS 6.2or later.The actual uncompressed size of the VTV in megabytes.
VTVTimesRead int VTV This field is valid only if LCM is running with NCS 6.2or later.The number of times the VTV has been read.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 75
VTVUnavailableVTVUNAVAIL
bool VTV This field is valid only if LCM is running with NCS 6.2or later.The VTV is unavailable because it is either mounted,resident, or fenced according to VSM.
VTVVTSS char VTV The Virtual Tape SubSystem (VTSS) in which the VTVresides.
WrongScratchStatusWRNGSCRST
bool LCM The scratch status indicator in the HSC CDS is incorrect.For volumes covered by HSCUNSCR (Explorer: "SetHSC-scratch indicators to OFF" on the Scratch tab of theRun object), the WrongScratchStatus flag indicates thatthe HSC UNSCRATCH request failed. For volumes notcovered by HSCUNSCR, the WrongScratchStatus flagindicates that the scratch status recorded in the HSC CDSor in VSM does not agree with the scratch status in theTMS. This may occur for volumes when the Sync orSyncVTV option (Explorer: Sync tab of Run object) is notin effect or when the associated synchronization requestfails. The LCM log file contains a message for eachrequest failure. LCM does not set theWrongScratchStatus flag for volumes that are scratch inthe TMS but are not scratch in the HSC or in VSM if theyare in use at the time LCM attempts the unscratchoperation. This is a normal situation that can occurbetween the time a tape is allocated and the time it is putback in a cell.
TABLE 3-1 ACTION Statement WHEN Fields
Field Type Source Description
76 LCM Quick Reference • Revision 01 • E60155-01
SET METHOD Statement WHEN FieldsTABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
BAAbdflg char TLMS TLMS-specific abend flag.
BAActive int TLMS TLMS-specific active file count.
BAAscbse char TLMS TLMS-specific associated base.
BAAscvol char TLMS TLMS-specific associated volume.
BABlkcnt int TLMS TLMS-specific block count.
BABlksiz int TLMS TLMS-specific block size.
BABuydat date TLMS TLMS-specific purchase date.
BACdsexp date TLMS TLMS-specific highest IBM expiration date on volume.
BACdsflg char TLMS TLMS-specific controlling data set flag.
BACdskep date TLMS TLMS-specific highest keep date on volume.
BACdsseq int TLMS TLMS-specific controlling data set sequence number.
BAChnvol char TLMS TLMS-specific 1st volume in chain.
BACkptkn char TLMS TLMS-specific check point taken (Y=Yes; B=No).
BAClncnt int TLMS TLMS-specific cleanings since certified.
BAClndat date TLMS TLMS-specific clean date.
BACpusmf char TLMS TLMS-specific creation CPU SMF ID.
BACredat date TLMS TLMS-specific create date.
BACreddn char TLMS TLMS-specific creation ddname.
BACredev char (alternate) TLMS TLMS-specific creation drive.
BACrejob char TLMS TLMS-specific creation jobname.
BACrepgm char TLMS TLMS-specific creation program name.
BACrestp char TLMS TLMS-specific creation stepname.
BACretim time TLMS TLMS-specific time of day the volume was created.
E60155-01 • Revision 01 Chapter 3 77
BACrtcnt int TLMS TLMS-specific total certifications.
BACrtdat date TLMS TLMS-specific certification date.
BADamcde char TLMS TLMS-specific damaged code.
BADen char TLMS TLMS-specific density.
BADescde char TLMS TLMS-specific destroyed code.
BADesdat date TLMS TLMS-specific destroyed date.
BADsn char TLMS TLMS-specific data set name.
BAErgcnt int TLMS TLMS-specific current erase gaps on volume.
BAErgmax int TLMS TLMS-specific max erase gaps on volume.
BAExpdat date TLMS TLMS-specific IBM expiration date for data set.
BAFilcnt int TLMS TLMS-specific file count.
BAFilseq int TLMS TLMS-specific file sequence in chain.
BAFlg001 int TLMS TLMS-specific reserved for CA-1 FLG001.
BAFlg003 int TLMS TLMS-specific reserved for CA-1 FLG003.
BAFlg004 int TLMS TLMS-specific reserved for CA-1 FLG004.
BAFlg005 int TLMS TLMS-specific reserved for TLMS FLG005.
BAFlg006 int TLMS TLMS-specific reserved for TLMS FLG006.
BAKepdat date TLMS TLMS-specific keep date for data set.
BALabtyp char TLMS TLMS-specific label type.
BALasdat date TLMS TLMS-specific last used date.
BALasdev char (alternate) TLMS TLMS-specific last used drive.
BALasjob char TLMS TLMS-specific last used jobname.
BALoc char TLMS TLMS-specific volume location.
BALoscde char TLMS TLMS-specific lost code.
BAMds1st char (alternate) TLMS TLMS-specific multi-dataset first chain pointer.
BAMdslst char (alternate) TLMS TLMS-specific multi-dataset last chain pointer.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
78 LCM Quick Reference • Revision 01 • E60155-01
BAMovdat date TLMS TLMS-specific date volume moved.
BAMvlcnt int TLMS TLMS-specific count of volumes in BAMvltab.
BAMvlseq1 int TLMS TLMS-specific multi-volume sequence number 1.
BAMvlseq2 int TLMS TLMS-specific multi-volume sequence number 2.
BAMvlseq3 int TLMS TLMS-specific multi-volume sequence number 3.
BAMvlseq4 int TLMS TLMS-specific multi-volume sequence number 4.
BAMvlseq5 int TLMS TLMS-specific multi-volume sequence number 5.
BAMvlvol1 char TLMS TLMS-specific multi-volume chain serial number 1.
BAMvlvol2 char TLMS TLMS-specific multi-volume chain serial number 2.
BAMvlvol3 char TLMS TLMS-specific multi-volume chain serial number 3.
BAMvlvol4 char TLMS TLMS-specific multi-volume chain serial number 4.
BAMvlvol5 char TLMS TLMS-specific multi-volume chain serial number 5.
BAOutsrv char TLMS TLMS-specific out of service code. Contains BALoscde,BADamcde, and BADescde.
BARecsiz int TLMS TLMS-specific logical record length.
BARederr int TLMS TLMS-specific current temporary read errors.
BARfm char TLMS TLMS-specific record format.
BARtncnt1 int TLMS TLMS-specific retention count for retention entry 1.
BARtncnt2 int TLMS TLMS-specific retention count for retention entry 2.
BARtncnt3 int TLMS TLMS-specific retention count for retention entry 3.
BARtncnt4 int TLMS TLMS-specific retention count for retention entry 4.
BARtncnt5 int TLMS TLMS-specific retention count for retention entry 5.
BARtncnt6 int TLMS TLMS-specific retention count for retention entry 6.
BARtndev char TLMS TLMS-specific box or cabinet/slot.
BARtnLoc1 char TLMS TLMS-specific user retention location for retention entry1.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 79
BARtnLoc2 char TLMS TLMS-specific user retention location for retention entry2.
BARtnLoc3 char TLMS TLMS-specific user retention location for retention entry3.
BARtnLoc4 char TLMS TLMS-specific user retention location for retention entry4.
BARtnLoc5 char TLMS TLMS-specific user retention location for retention entry5.
BARtnLoc6 char TLMS TLMS-specific user retention location for retention entry6.
BARtnptr char TLMS TLMS-specific offset of active retention entry.
BARtnsrc char TLMS TLMS-specific retention source. ' ' (blank) = No retentiondata; '1' = From RMF; '2' = From JCL; '3' = From manualupdate.
BARtntyp1 char TLMS TLMS-specific user retention type for retention entry 1.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used;'9' = Expiration date.
BARtntyp2 char TLMS TLMS-specific user retention type for retention entry 2.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used;'9' = Expiration date.
BARtntyp3 char TLMS TLMS-specific user retention type for retention entry 3.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used;'9' = Expiration date.
BARtntyp4 char TLMS TLMS-specific user retention type for retention entry 4.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used;'9' = Expiration date.
BARtntyp5 char TLMS TLMS-specific user retention type for retention entry 5.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used;'9' = Expiration date.
BARtntyp6 char TLMS TLMS-specific user retention type for retention entry 6.'1' = Catalog control; '2' = Date control; '3' = Catalog andage; '4' = Cycle control; '5' = Age; '6' = Move immediatecontrol; '7' = Manual control; '8' = Days since last used;'9' = Expiration date.
BAScrdat date TLMS TLMS-specific date volume scratched.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
80 LCM Quick Reference • Revision 01 • E60155-01
BAScruid char TLMS TLMS-specific scratched by ID. '1' = TRS; '2' = JCL; '3' =Manual; '4' = External data manager.
BaseName char TMS The controlling data set name of the volume. If the dataset is a member of a Generation Data Group, only thebase name (no .GnnnnVnn) is included.
BASmsmgt char TLMS TLMS-specific SMS management class
BASpcchn char TLMS TLMS-specific special chaining (chained for moves).
BASpnflg char TLMS TLMS-specific spanned data set flag (1=spanned).
BASrvscr char TLMS TLMS-specific service/scratch indicator. '0' = Skippedsegment record; '1' = In service/Non scratch; '2' = Inservice/Scratch; '3' = Out service/Non scratch; '4' = OutService/Scratch.
BATaplen int TLMS TLMS-specific tape length.
BATapmod char TLMS TLMS-specific track recording technique.
BATaptyp char TLMS TLMS-specific tape type.
BATrspro char TLMS TLMS-specific TRS has processed this volume.
BAUnisrt int TLMS TLMS-specific sort unique code.
BAUsebuy int TLMS TLMS-specific uses since purchased.
BAUsecln int TLMS TLMS-specific uses since cleaned.
BAUsecrt int TLMS TLMS-specific uses since certified.
BAUsr001 char TLMS TLMS-specific user data. (Defaults to job accounting -TCB).
BAUsr002 char TLMS TLMS-specific user data. (Defaults to programmer name- TCB).
BAUsr003 char TLMS TLMS-specific user data area.
BAVender char TLMS TLMS-specific user updated manufacturer code.
BAVol1st char (alternate) TLMS TLMS-specific multi-volume first volume serial numberpointer.
BAVolcnt int TLMS TLMS-specific volume count.
BAVollst char (alternate) TLMS TLMS-specific multi-volume last chain pointer.
BAVolown char TLMS TLMS-specific volume owner.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 81
BAVolseq int TLMS TLMS-specific volume sequence number.
BAVolser char TLMS TLMS-specific volume serial number
ClassificationCLS
char (alternate) HSC,MVC,TMS,VTV
Classification of the volume.
BadScratchVolumes marked defective and scratch in TMSCleanVolumes with the HSC cleaning prefixExpiredVolumes marked not scratch and expired in TMSNonScratchVolumes not scratch, badscratch, expired, or cleanScratchVolumes available for receiving new tape data sets
Copy int TMS Copy number of the volume. A value of 1 refers to themost recently created copy of the data set according tothe tape management system, 2 refers to the next mostrecently created copy, and so on.
CreatingTMSDriveCTDRIVE
char (alternate) TMS The unit address of the tape drive on which the tapedata set was created, printed as a hexadecimal characterstring.
CreationDateCDATE
date MVC,TMS,VTV
The date the volume was created. The first availablefield of the following determines the creation date:CreationTMSDate, CreationVTVDate,CreationMVCDate.
CreationJobNameCJOBNAMEJOBNAME
char TMS The JCL job name that created the volume.
CreationMVCDateCMDATE
date MVC The date the volume was created as recorded by VSM.
CreationMVCTimeCMTIME
time MVC The time of day the volume was created as recorded byVSM.
CreationStepNameCSTEPNAMESTEPNAME
char TMS The JCL step name that created the volume.
CreationTimeCTIME
time MVC,TMS,VTV
The time of day the volume was created. The firstavailable field of the following determines the creationtime: CreationTMSTime, CreationVTVTime,CreationMVCTime.
CreationTMSDateCTDATE
date TMS The date the volume was created as recorded in theassociated tape management system.
CreationTMSTimeCTTIME
time TMS The time of day the volume was created as recorded inthe associated tape management system.
CreationVTVDateCVDATE
date VTV The date the volume was created as recorded by VSM.
CreationVTVTimeCVTIME
time VTV The time of day the volume was created as recorded byVSM.
CTAccount char ControlT Control-T-specific accounting information
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
82 LCM Quick Reference • Revision 01 • E60155-01
CTActiveds int ControlT Control-T-specific number of active labels on volume.
CTBlksize int ControlT Control-T-specific block size.
CTBlockct int ControlT Control-T-specific block count.
CTBoxid char ControlT Control-T-specific box ID.
CTChkindt date ControlT Control-T-specific volume check-in date.
CTClncount int ControlT Control-T-specific clean count
CTCrecpu char ControlT Control-T-specific creation CPU name.
CTCreddn char ControlT Control-T-specific creation DD name.
CTCredt date ControlT Control-T-specific creation date.
CTCrejbn char ControlT Control-T-specific creation job name.
CTCrepgm char ControlT Control-T-specific creation program name.
CTCrestep char ControlT Control-T-specific creation stepname.
CTCretm time ControlT Control-T-specific creation time
CTCreuad char (alternate) ControlT Control-T-specific creation unit address.
CTDdsexpd1 date ControlT Control-T-specific first expiration date.
CTDdsexpd2 date ControlT Control-T-specific second expiration date.
CTDdsexpd3 date ControlT Control-T-specific third expiration date.
CTDeleted bool ControlT Control-T-specific volume marked as deleted.
CTDsname char ControlT Control-T-specific data set name.
CTDsvolser char ControlT Control-T-specific first data set begins on volume.
CTDyndef bool ControlT Control-T-specific volume dynamically added.
CTEdm bool ControlT Control-T-specific volume managed by an External DataManager.
CTExprtrn date ControlT Control-T-specific expected return date from outlocation.
CTExtdel bool ControlT Control-T-specific volume will be deleted when expired.
CTExternal bool ControlT Control-T-specific external volume.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 83
CTFirstvol char ControlT Control-T-specific first volume in the multi-volumegroup.
CTHold bool ControlT Control-T-specific volume is in the main library due torecall operation.
CTInatl bool ControlT Control-T-specific volume resides inside a robotic tapelibrary.
CTInuse bool ControlT Control-T-specific volume currently in use.
CTIoerprm int ControlT Control-T-specific permanent read errors.
CTIoerprmc int ControlT Control-T-specific permanent read errors since lastclean.
CTIoertmp int ControlT Control-T-specific temporary read errors.
CTIoertmpc int ControlT Control-T-specific temporary read errors since last clean
CTIoewprm int ControlT Control-T-specific permanent write errors.
CTIoewprmc int ControlT Control-T-specific permanent write errors since lastclean.
CTIoewtmp int ControlT Control-T-specific temporary write errors.
CTIoewtmpc int ControlT Control-T-specific temporary write errors since lastclean.
CTLaccdt date ControlT Control-T-specific last access job date.
CTLaccjbn char ControlT Control-T-specific last job name that accessed thevolume.
CTLacctm time ControlT Control-T-specific last access job time.
CTLblnum int ControlT Control-T-specific highest label number on volume.
CTLbltyp char ControlT Control-T-specific label type
AL
AUL
BLP
NL
NSL
SL
SUL
CTLclndt date ControlT Control-T-specific last clean date.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
84 LCM Quick Reference • Revision 01 • E60155-01
CTLibrary char ControlT Control-T-specific robotic tape library name.
CTLocation char ControlT Control-T-specific current location of volume.
CTLocseq int ControlT Control-T-specific current vault sequence number.
CTLrecl int ControlT Control-T-specific record length.
CTManvlt bool ControlT Control-T-specific volume manually moved to vault.
CTMedia char ControlT Control-T-specific media name
CTMovedate date ControlT Control-T-specific move date.
CTNextvol char ControlT Control-T-specific next volume in the multi-volumegroup.
CTNostack bool ControlT Control-T-specific volume cannot be a candidate fordynamic stacking.
CTOut bool ControlT Control-T-specific volume outside the main library.
CTPendscr bool ControlT Control-T-specific pending scratch status.
CTPendvlt bool ControlT Control-T-specific pending vault.
CTPrevvol char ControlT Control-T-specific previous volume in the multi-volumegroup.
CTPvlt bool ControlT Control-T-specific potential vault.
CTRecall bool ControlT Control-T-specific volume will recall back to mainlibrary.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 85
CTRecfm char ControlT Control-T-specific record format.
A
B
D
F
FB
FBA
FBM
FBS
M
S
U
V
VB
VBA
VBM
VBS
VS
CTRecfrom char ControlT Control-T-specific vault name recalled from.
CTRecreate bool ControlT Control-T-specific dataset recreated.
CTReturnvl bool ControlT Control-T-specific volume returned from vault.
CTRetvltdt date ControlT Control-T-specific date to return to vault.
CTScratch bool ControlT Control-T-specific volume scratch status.
CTScrdt date ControlT Control-T-specific volume scratch date.
CTSlname char ControlT Control-T-specific SL name.
CTSlotnum int ControlT Control-T-specific slot number
CTSmsmc char ControlT Control-T-specific SMS management class.
CTSmssg char ControlT Control-T-specific SMS storage group.
CTVabend bool ControlT Control-T-specific incomplete data set on volume.
CTVault char ControlT Control-T-specific first vault name.
CTVault2 char ControlT Control-T-specific second vault name.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
86 LCM Quick Reference • Revision 01 • E60155-01
CTVault3 char ControlT Control-T-specific third vault name.
CTVaulted bool ControlT Control-T-specific vaulted.
CTVendor char ControlT Control-T-specific volume's vendor name
CTVformat char ControlT Control-T-specific volume format
CTVfreekb int ControlT Control-T-specific free kilo-bytes on volume.
CTVlrstrt bool ControlT Control-T-specific volume processed under MVS restart.
CTVltentdt date ControlT Control-T-specific vault entry date.
CTVltexpdt date ControlT Control-T-specific vault expiration date.
CTVoledmid char ControlT Control-T-specific volume's External Data Manager ID.
CTVolexcp int ControlT Control-T-specific EXCP Count
CTVolexpdt date ControlT Control-T-specific volume expiration date.
CTVolodesc char ControlT Control-T-specific volume user description.
CTVolowner char ControlT Control-T-specific volume owner
CTVolseq int ControlT Control-T-specific volume sequence number in a multi-volume group.
CTVolser char ControlT Control-T-specific volume serial number.
CTVolsnum int ControlT Control-T-specific number volumes data set resides on.
CTVoltype char ControlT Control-T-specific volume type.
L
P
CTVolusect int ControlT Control-T-specific volume use count since last scratch.
CTVolusetc int ControlT Control-T-specific volume use count.
CTVstkgrp char ControlT Control-T-specific stacking group name.
CTVusedkb int ControlT Control-T-specific Used kilo-bytes on volume.
CycleDateCYDATE
date TMS The date used by LCM for CYCLESOON processing. Ifmissing, LCM does not perform CYCLESOONprocessing on this volume.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 87
DataSetIdentifierDSID
char TMS The most specific matching data set identifier found forthe data set name on the Data Set tab of the Methodsfolder (Explorer) or a DATASET statement (ParameterFile).
DataSetNameDSN
char TMS The controlling data set name of the volume. If the dataset is a member of a Generation Data Group, the.GnnnnVnn qualifier is included.
DaysSinceCreationCDAYS
int MVC,TMS,VTV
The number of days since the data set was created. Thefirst available field of the following determines the dayssince creation: DaysSinceCreationTMS,DaysSinceCreationMVC, DaysSinceCreationVTV.
DaysSinceCreationMVCCMDAYS
int MVC The number of days since the data set was created asrecorded by VSM.
DaysSinceCreationTMSCTDAYS
int TMS The number of days since the data set was created asrecorded in the associated tape management system.
DaysSinceCreationVTVCVDAYS
int VTV The number of days since the data set was created asrecorded by VSM.
DaysSinceEnterEDAYS
int HSC The number of days since the volume was entered intoan LSM. If all volumes of a multi-volume data set arecovered by the same Management Method, the mostrecent enter day for any volume is used by LCM for allvolumes in the multi-volume data set.
DaysSinceLocationLDAYSLOCDAYS
int TMS The number of days since the tape was moved to a tapestorage location.
DaysSinceMountMDAYS
int HSC The number of days since the HSC last mounted thevolume.
DaysSinceReferenceMVCRMDAYS
int MVC The number of days since reference as recorded by VSMfor an MVC (Multiple Volume Cartridge)
DaysSinceReferenceTMSRTDAYS
int TMS The number of days since reference as recorded in theassociated tape management system for volumes beingtreated as a unit (Multi-volume support).
DaysSinceReferenceVTVRVDAYS
int VTV The number of days since reference as recorded by VSMfor a VTV (Virtual Tape Volume)
DaysSinceSelectSDAYS
int HSC The number of days since the volume was selected bythe HSC.
DaysTillCycleCYDAYSDAYSTILLEXPIREXDAYS
int TMS The number of days LCM uses for CYCLESOONprocessing. If missing, LCM will not performCYCLESOON processing on this volume.
Deleted bool TMS The volume is marked deleted in the tape managementsystem. Note: The value of this field is false for allvolumes known to LCM unless: Explorer: The checkboxon the Deleted tab of the TMS object is not checked;Parameter File: the NODELETECHECK parameter isspecified on the TMS statement.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
88 LCM Quick Reference • Revision 01 • E60155-01
Encrypted bool HSC This field is valid only if LCM is running with NCS 6.2or later.This volume is encrypted.
EnterDateENDATE
date HSC The date the volume was entered into an LSM. If allvolumes of a multi-volume data set are covered by thesame Management Method, the most recent enter dateof any volume is used by LCM for all volumes in themulti-volume data set.
EnterTimeENTIME
time HSC The time of day the volume was entered.
Errant bool HSC The HSC has marked this volume errant. Requires HSCPTF L1H10CC (HSC 4.0) or L1H10CE (HSC 4.1) toproduce accurate information.
ExLblReadableEXLBLRD
bool HSC The cartridge external label is OCR readable.
ExpireDateEXPDTXDATE
date TMS The date the volume will expire based on the expirationdate in the tape management system. Special expiredates are: AGE/nnn - Expires nnn days from create ormove date; CATLG - Expires when the data set name nolonger exists in the MVS system catalog, regardless ofthe keep date; CATLG/nnn - Expires nnn days aftercreation and the data set no longer resides in the MVScatalog; CYCLE/nnn - Oldest data set expires after nnncycles; FOREIGN - Foreign volume; LDATE/nnn -Expires nnn days after last used; MSG/nnn - TMS user-defined; PERM - Never expires; STATS/nnn - Neverexpires; USER/nnn - Never expires; ZEROS - CA-TLMSvalue was zeros; Julian date - Expires on the julian date.
ExternalLabelEXLBL
bool HSC The cartridge has an external label.
ExternallyManagedEXTERNAL
bool TMS The volume is defined to the tape management system,but its use is controlled by some other software system.
GDG bool TMS The volume is a member of a Generation Data Group.
GDGWrap bool TMS The volume is a member of a Generation Data Groupwhere the Gnnnn number has wrapped from 9999 to0001.
GenerationGEN
int TMS The relative generation number + 1, based on the tapemanagement system.
HoursSinceCreationVTVCVHOURS
int VTV The number of hours since creation as recorded by VSMfor a VTV (Virtual Tape Volume).
HoursSinceReferenceVTVRVHOURS
int VTV The number of hours since reference as recorded byVSM for a VTV (Virtual Tape Volume).
InitialACSIDIACSID
char (alternate) HSC,MVC
The ACS ID in which the volume resided at thebeginning of the LCM run.
InitialLSMCellILSMCELL
char (alternate) HSC The coordinates of the LSM Cell where the volumeresided at the beginning of the LCM run.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 89
InitialLSMColumnILSMCOL
int HSC The LSM Column number where the volume resided atthe beginning of the LCM run.
InitialLSMGroupILSMGRP
char (alternate) LCM The name of the LSM Group where the volume residedat the beginning of the LCM run.
InitialLSMIDILSMID
char (alternate) HSC,MVC
The LSM ID where the volume resided at the beginningof the LCM run.
InitialLSMNameILSMNAME
char (alternate) LCM The Name of the LSM where the volume resided at thebeginning of the LCM run.
InitialLSMPanelILSMPNL
int HSC The LSM Panel number where the volume resided at thebeginning of the LCM run.
InitialLSMPanelFrozenILSMPNLFZ
bool HSC The volume resided in a frozen panel at the beginningof the LCM run.
InitialLSMRowILSMROW
int HSC The LSM Row number where the volume resided at thebeginning of the LCM run.
InTMS bool TMS The volume is in a tape management system defined toLCM.
LastUsedTMSDriveLUTDRIVE
char (alternate) TMS The unit address of the tape drive on which the tapewas last used, printed as a hexadecimal character string.
LocationCodeLOCCODE
char TMS The identifier assigned to a tape volume by the tapemanagement system to identify the intended storagelocation for that volume.
LocationDateLDATELOCDATE
date TMS The date the volume was moved to the tapemanagement system's tape storage location.
LocationNameLOCNAME
char (alternate) LCM The name of the tape storage location. Location Namesare not defined to the tape management system, but areassigned by LCM from tape management systeminformation as specified by: Explorer: the Locationobject Codes tab; Parameter File: the Location statementCode parameter.
ManagementClassMGMTCLAS
char (alternate) TMS The name of the SMS Management Class for thevolume.
MaxUseCount int HSC The maximum usage for a cleaning cartridge set by theVOLATTR Maxclean or MNTD Maxclean value.
MediaSourceMEDIAS
char (alternate) LCM The source of information used to determine thevolume's MediaType value.
DFLTThe media type defaulted to Standard.HSCCDSThe HSC Control Data Set.VOLDEFThe VOLATTR statements contained in the fileidentified by the HSC VOLDEF parameter.VSMVTVVSM Virtual Tape Volume information.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
90 LCM Quick Reference • Revision 01 • E60155-01
MediaTypeMEDIAMEDIAT
char (alternate) HSC,MVC,VTV
The media type of the volume.
StandardStandard length 3480 cartridge.Long3490E extended capacity cartridge.DD3A10 Gb capacity helical cartridge.DD3B25 Gb capacity helical cartridge.DD3C50 Gb capacity helical cartridge.DD3DCleaning cartridge for helical drives.STK1R9840 data cartridge.STK1UCleaning cartridge for 9840 transports.STK1YCleaning cartridge for 9840D transports.STK2PT9940A data cartridge.STK2WCleaning cartridge for T9940 transports.T10000TTSmaller-capacity 1TB T10000C cartridge.T10000TST10000 "sport" cartridge.T10000T1Full-capacity 500GB T10000A or 1TB T10000B cartridge.T10000T2Full-capacity 5TB T10000C cartridge.T10000CCT10000C cleaning cartridge.T10000CLT10000A, T10000B, or T10000C cleaning cartridge.T10000CTT10000A or T10000B cleaning cartridge.ZCART9490EE ZCART media cartridge.LTO-100GLTO 100GB capacity cartridge.LTO-200GLTO 200GB capacity cartridge.LTO-35GLTO 35GB capacity cartridge.LTO-400GLTO 400GB capacity cartridge.LTO-400WLTO 400Gb capacity WORM cartridge.LTO-800GLTO 800GB capacity cartridgeLTO-800WLTO 800GB capacity WORM cartridgeLTO-1.5TLTO 1.5TB capacity cartridge.LTO-1.5WLTO Generation 5 WORM cartridge.LTO-2.5TLTO 2.5TB capacity cartridge.LTO-2.5WLTO Generation 5 WORM cartridge.LTO-CLN1LTO cleaning type 1 cartridge.LTO-CLN2LTO cleaning type 2 cartridge.LTO-CLNULTO universal cleaning cartridge.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 91
MediaTypeMEDIAMEDIAT
SDLTSDLT 160GB cartridge.SDLT-1SDLT Generation 1 cartridge.SDLT-4SDLT Generation 4 cartridge.SDLT-S2SDLT Generation S2 cartridge.SDLT-S3SDLT Generation S3 cartridge.SDLT-S4SDLT Generation S4 cartridge.SDLTCSDLT cleaning cartridge.VIRTUALVirtual Tape Volume (VTV) in the StorageTek VirtualStorage Manager system.
MethodNameMETHODMTHMTHNAME
char (alternate) LCM The name of the Management Method assigned to thisvolume.
MountDateMDATE
date HSC The date the volume was last mounted in an LSM.
Mounted bool HSC The volume is currently mounted.
MountTimeMTIME
time HSC The time of day the volume was last mounted in anLSM.
MVC bool MVC The volume is a Multiple Volume Cartridge for VSM.
MVCAudit bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is either being audited or the audit failed. Ifthe audit failed, VTCS will not use the MVC formigration. To clear this condition, rerun the AUDITagainst this MVC.
MVCAvailableMVCAVAIL
int MVC The percentage of the MVC available for use.
MVCBroken bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has an error that should be investigated. Theerror might not make the MVC unusable, but VTCSdoes not select the MVC for migration for 12 hours afterthis status has been set to true. After the 12 hour period,the MVC is least preferred for subsequent migrations,and recalls from the MVC can cause VTCS to drain it.This error condition can be accompanied by messagesSLS6686, SLS6687, SLS6688, SLS6690 and/or SLS6693.Any of the following conditions can cause this MVCerror: MVC corrupted by another job (other thanVTCS/VTSS). Attempt to use a read-only MVC formigration. A DDR swap failure. An RTD failure.
MVCConsolidateDate date MVC This field is valid only if LCM is running with NCS 6.2or later.The date on which the MVC was consolidated asrecorded by VSM.
MVCConsolidateTime time MVC This field is valid only if LCM is running with NCS 6.2or later.For a consolidation MVC, this field displays the time ofthe consolidation.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
92 LCM Quick Reference • Revision 01 • E60155-01
MVCConsolidation bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is a consolidation MVC.
MVCDataCheck bool MVC This field is valid only if LCM is running with NCS 6.2or later.A data check was reported for this MVC. VSM will notuse this MVC again for migration.
MVCDraining bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is being drained because of one of: 1) anautomatic drain or demand reclaim. 2) an explicitMVCDRain command, 3) The previous DRAIN requestfailed, in which case VTCS will not use the MVC formigration. To clear this condition, enter MVCDRainagainst MVC without the EJect option.
MVCEject bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is in the process of eject either because youissued MVCDRainEJect or the MVC was ejected forupdate by a RACROUTE call. The MVC will not be usedagain for migration or recall. To clear this condition, useMVCDRain against MVC without the EJect option.
MVCExport bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is an export MVC.
MVCFragmentedMVCFRAG
int MVC The percentage of the MVC that is not available due tofragmentation.
MVCFull bool MVC This field is valid only if LCM is running with NCS 6.2or later.Their is no space available on the MVC.
MVCInitialized bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has been initialized.
MVCInUse int MVC The percentage of the MVC used by valid Virtual TapeVolumes.
MVCInvalidMIR bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has an invalid MIR.
MVCLost bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC was not mounted in response to the lastmount request. The MVC can still be used for migration,but will not select the MVC for migration for 12 hoursafter it is marked lost. After the 12 hour period, theMVC will be least preferred. This condition will clearitself the next time that the MVC is mounted.
MVCMaximumReached bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has reached the maximum VTVs per MVC.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 93
MVCMediaSize int MVC This field is valid only if LCM is running with NCS 6.2or later.The size in MB of the MVC. This is determined onlyafter VTCS has used an MVC. "UNKNOWN" appears inthis field until VTCS migrates a VTV to the MVC.
MVCMountDate date MVC This field is valid only if LCM is running with NCS 6.2or later.The date on which the MVC was mounted, as recordedby VTSS.
MVCMountTime time MVC This field is valid only if LCM is running with NCS 6.2or later.The time the MVC was last mounted, as recorded byVTSS.
MVCPoolName char (alternate) MVC This field is valid only if LCM is running with NCS 6.2or later.MVC Pool Name from the VTCS MVCPOOL controlstatement.
MVCReadOnly bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC has been marked read-only.
MVCRetired bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC is retired. VTCS will recall from, but notmigrate to, the MVC. Replace the MVC as soon aspossible.
MVCStorageClassMVCSTORCLASSSTORAGECLASSSTORCLAS
char MVC This field is valid only if LCM is running with NCS 6.2or later.The VTCS Storage Class for the volume.
MVCUsableForMigration bool MVC This field is valid only if LCM is running with NCS 6.2or later.Indicates whether the MVC can be used for migration.
MVCUsededMVCTimesMount
int MVC The number of times the MVC has been mounted.
MVCVTSS char MVC This field is valid only if LCM is running with NCS 6.2or later.VTSS name where the MVC was last used.
MVCVTVCountMVCVTVCNT
int MVC_VTV The number of valid Virtual Tape Volumes on the MVC.
MVCWarrantyExpired bool MVC This field is valid only if LCM is running with NCS 6.2or later.The MVC’s warranty has expired. VTCS continues touse the MVC. You should start making plans to replacethe MVC when it reaches Retired state.
NotuseableNOUSE
bool HSC The HSC has marked this volume as not useable.
OnPullListONPL
bool LCM The volume is on a Pull List.
OverMaxCleanOverHSCMAXCLN
bool HSC The cleaning cartridge has exceeded its maximum usagecount.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
94 LCM Quick Reference • Revision 01 • E60155-01
PermanentReadErrors int TMS The number of permanent read errors for the volume.
PermanentWriteErrors int TMS The number of permanent write errors for the volume.
PullListNamePLNAME
char (alternate) LCM The name of the Pull List for the volume.
RecordingTechniqueRecTech
char HSC The recording technique associated with a volume'smedia This is the method used to record data tracks onthe tape surface for the volume.
ReferenceMVCDateRMDATE
date MVC The date on which the MVC was last referenced, asrecorded by VSM.
ReferenceTMSDateRTDATE
date TMS The date of the last reference, as recorded in theassociated tape management system, for volumes beingtreated as a unit (Multi-volume support).
ReferenceVTVTimeRVTIME
time VTV The time of day the volume was last referenced, asrecorded by VSM.
RunName char (alternate) LCM The name of the Run object from the JCL EXECstatement Run PARM.
RunType char (alternate) LCM The RunType from the JCL EXEC statement RunTypePARM.
SelectDateSDATE
date HSC The date the volume was last selected in an LSM.
Selected bool HSC The volume is currently selected.
SelectTimeSTIME
time HSC The time of day the volume was selected by the HSC.
SerialSERVOLVOLSERVOLUME
char HSC,MVC,TMS,VTV
The 6-character identifier of a tape volume.
Serial1SER1
char TMS The 6-character identifier of the first volume of thevolume set associated with this volume.
SubpoolSP
char (alternate) LCM The name of the Subpool managing a group of volumeserial numbers. This is defined in the LCM Subpoolobject (Explorer) or Subpool statement (Parameter File).
SubpoolIdSPID
char (alternate) HSC Volume subpool ID from the HSC. This will be the 13-character name of the pool if using HSC SCRPOOLstatements, or the 3-digit subpool index number if usingSLSUX03.
SubpoolLabelTypeSPLBLTYP
char (alternate) HSC Volume subpool label type from the HSC.
TapeGroupTG
char (alternate) LCM The name of the tape group of a volume. Explorer: Thisis defined on the Media tab of the Subpool object.Parameter File: This is defined in the Media parameterof the Subpool statement.
TemporaryReadErrors int TMS The number of temporary read errors for the volume.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 95
TemporaryWriteErrors int TMS The number of temporary write errors for the volume.
TM#Dsnbs int CA1 CA-1-specific number of data set name blocks.
TM128trk bool CA1 CA-1-specific recording technique. x'E8' indicates Trk3590 cartridge tape.
TM18trk bool CA1 CA-1-specific recording technique. x'C0' indicates 3480cartridge tape - 18 tracks.
TM3590 bool CA1 CA-1-specific recording density. x'E8' indicates 3590cartridge tape.
TM36Trk bool CA1 CA-1-specific recording technique. x'E0' indicates 3490cartridge tape - 36 tracks.
TM36trk2 bool CA1 CA-1-specific recording technique. x'E1' indicates 3490Ecartridge tape - 36 tracks (extended length).
TM38000 bool CA1 CA-1-specific recording density. x'E3' indicates 38K bpi(cartridge).
TM38KC bool CA1 CA-1-specific recording density. x'E7' indicates 38K bpi(cartridge-compacted).
TM9trk bool CA1 CA-1-specific recording technique. x'80' indicates ninetrack tape.
TMAbend bool CA1 CA-1-specific internal flag bit x'10'. Volume closed byabend.
TMActvl1 char CA1 CA-1-specific actual internal volser
TMActvl2 char CA1 CA-1-specific actual internal volser
TMAcvoli bool CA1 CA-1-specific internal flag4 bit x'40'. Actual volser inuse.
TMAdsnb int CA1 CA-1-specific address (relative to BASE in TMSCTL#2)of first DSNB record associated with this volume record.
TMAldsnb int CA1 CA-1-specific address (relative to BASE in TMSCTL#2)of last DSNB record associated with this volume record.
TMB1Dis int CA1 CA-1-specific B1 security disclosure label.
TMB1Int int CA1 CA-1-specific B1 security integrity label.
TMBadtap bool CA1 CA-1-specific internal flag3 bit x'80'. CA-9/R+ indicatedbad tape, do not mount for scratch.
TMBlkcnt int CA1 CA-1-specific data set block count.
TMBlksi int CA1 CA-1-specific maximum block size.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
96 LCM Quick Reference • Revision 01 • E60155-01
TMBthdt date CA1 CA-1-specific date tape was first used.
TMCatlog bool CA1 CA-1-specific internal flag2 bit x'80'. Data set was onMVS catalog.
TMClean bool CA1 CA-1-specific internal flag bit x'08'. Volume listed to becleaned.
TMClncnt int CA1 CA-1-specific number of times tape cleaned.
TMClosed bool CA1 CA-1-specific internal flag bit x'40'. Volume closednormally.
TMCpgm char CA1 CA-1-specific creating program name.
TMCrtdt date CA1 CA-1-specific creation date.
TMCrtti time CA1 CA-1-specific creation time.
TMCruni char (alternate) CA1 CA-1-specific address of creation unit.
TMDatcln date CA1 CA-1-specific date tape was last cleaned.
TMDdname char CA1 CA-1-specific creating ddname.
TMDegau bool CA1 CA-1-specific internal flag4 bit x'10'. Tape has beendegaussed.
TMDelet bool CA1 CA-1-specific internal flag bit x'02'. Volume in delete(inactive) status
TMDen char (alternate) CA1 CA-1-specific recording density.
TMDfault bool CA1 CA-1-specific internal flag bit x'01'. Volume eligible forRDS override.
TMDfexu bool CA1 CA-1-specific internal flag3 bit x'04'. Default expirationdate used at open output.
TMDsn char CA1 CA-1-specific data set name.
TMDsn17 char CA1 CA-1-specific last 17 bytes of dsn.
TMDynam bool CA1 CA-1-specific internal flag3 bit x'10'. Controlled by CA-DYNAM/T.
TMEcatlg bool CA1 CA-1-specific internal flag2 bit x'08'. Expired fromcatalog control (TMSCTLG).
TMEcycle bool CA1 CA-1-specific internal flag2 bit x'04'. Expired from cyclecontrol (TMSCYCLE).
TMEdmid char CA1 CA-1-specific external data manager id.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 97
TMEdmtap bool CA1 CA-1-specific internal flag3 bit x'20'. Controlled byexternal data manager.
TMEldate bool CA1 CA-1-specific internal flag bit x'02'. Expired fromLDATE control (TMSCLEAN).
TMErase bool CA1 CA-1-specific internal flag3 bit x'08'. Data set eraserequired.
TMEsms bool CA1 CA-1-specific internal flag4 bit x'80'. Tape expired bySMS max retention rules.
TMEtms bool CA1 CA-1-specific internal flag bit x'01'. Expired by TMS.
TMExpdt date CA1 CA-1-specific expiration date.
TMFilcpy bool CA1 CA-1-specific internal flag3 bit x'01'. Created by CA-1/Copycat.
TMFlag1 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag2 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag3 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag4 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag5 char (alternate) CA1 CA-1-specific internal flag byte.
TMFlag6 char (alternate) CA1 CA-1-specific internal flag byte.
TMFrsvol char CA1 CA-1-specific first volser of data set.
TMIntal bool CA1 CA-1-specific internal flag1 bit x'80'. Internal fieldchanged by user.
TMInuse bool CA1 CA-1-specific internal flag4 bit x'02'. Tape is in use forRTS (Real Time Stacking).
TMIscat bool CA1 CA-1-specific internal flag4 bit x'08'. File on OS catalog.
TMJobnm char CA1 CA-1-specific creating job name.
TMLasusd date CA1 CA-1-specific date last used.
TMLasusj char CA1 CA-1-specific job name which last used volume.
TMLasust time CA1 CA-1-specific time last used.
TMLpgm char CA1 CA-1-specific last used program name.
TMLrecl int CA1 CA-1-specific logical record length.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
98 LCM Quick Reference • Revision 01 • E60155-01
TMLtype char CA1 CA-1-specific tape label type. One of SL, SUL, NL, NSL,BLP, AL1, AU1, AL3, AU3.
TMNostak bool CA1 CA-1-specific internal flag4 bit x'01'. No further stackingallowed.
TMNrs bool CA1 CA-1-specific internal flag4 bit x'04'. Non-resident tape.
TMNxtVol char CA1 CA-1-specific next volser of data set.
TMOutar char CA1 CA-1-specific location id of out-of-area tape.
TMOutdat date CA1 CA-1-specific date tape was marked out-of-area.
TMOutput bool CA1 CA-1-specific internal flag2 bit x'40'. Volume opened foroutput.
TMPrerrc int CA1 CA-1-specific number of permanent read errors sincecleaned.
TMPrerri int CA1 CA-1-specific number of permanent read errors sinceinitialized.
TMPrvvol char CA1 CA-1-specific previous volser of data set.
TMPwerrc int CA1 CA-1-specific number of permanent write errors sincecleaned.
TMPwerri int CA1 CA-1-specific number of permanent write errors sinceinitialized.
TMRecfm char CA1 CA-1-specific record format. One of V, VA, VS, VB,VBM, VBA, VBS, F, FM, FA, FS, FB, FBM, FBA, FBS, U.
TMRedwd1 bool CA1 CA-1-specific recording technique. x'E4' indicatesRedwood 12.5G capacity.
TMRedwd2 bool CA1 CA-1-specific recording technique. x'E5' indicatesRedwood 25G capacity.
TMRedwd3 bool CA1 CA-1-specific recording technique. x'E6' indicatesRedwood 50G capacity.
TMRelevm bool CA1 CA-1-specific internal flag3 bit x'40'. Tape released byexternal vault manager.
TMReuse bool CA1 CA-1-specific internal flag2 bit x'20'. Data set recreated.
TMRobid int CA1 CA-1-specific robotic device indicator.
TMRobty int CA1 CA-1-specific tape in robotic device.
TMScrtch bool CA1 CA-1-specific internal flag bit x'04'. Volume in scratchstatus.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 99
TMSlot char CA1 CA-1-specific vault slot number.
TMSmsmc char CA1 CA-1-specific SMS management class.
TMSName char (alternate) LCM The name of the tape management system defined onthe TMS statement.
TMStack bool CA1 CA-1-specific internal flag5 bit x'80'. Tape has been usedby RTS.
TMStpnam char CA1 CA-1-specific creating step name.
TMTempds bool CA1 CA-1-specific internal flag2 bit x'10'. Temporary data set.
TMTrerrc int CA1 CA-1-specific number of temporary read errors sincecleaned.
TMTrerri int CA1 CA-1-specific number of temporary read errors sinceinitialized.
TMTrtch char (alternate) CA1 CA-1-specific recording technique.
TMTwerrc int CA1 CA-1-specific number of temporary write errors sincecleaned.
TMTwerri int CA1 CA-1-specific number of temporary write errors sinceinitialized.
TMUcount int CA1 CA-1-specific number of times tape opened sincebirthdate.
TMUltif bool CA1 CA-1-specific internal flag3 bit x'02'. Additional filesexist in volume set.
TMUpdate bool CA1 CA-1-specific internal flag bit x'20'. Volume recordupdated by user.
TMUsecln int CA1 CA-1-specific use count at last cleaning.
TMUserTMAcct
char CA1 CA-1-specific user job accounting area.
TMUsuni char (alternate) CA1 CA-1-specific address of unit last used.
TMVabtch int CA1 CA-1-specific id of last CA-1 program to update record.
TMVacode int CA1 CA-1-specific audit code.
TMVacpu char CA1 CA-1-specific id of CPU used for last update.
TMVadate date CA1 CA-1-specific date of last update.
TMVaflg1 int CA1 CA-1-specific audit flag.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
100 LCM Quick Reference • Revision 01 • E60155-01
TMVahook int CA1 CA-1-specific id of last intercept to update record.
TMVatime time CA1 CA-1-specific time of last update.
TMVauser char CA1 CA-1-specific id of last user to update record.
TMVendor char CA1 CA-1-specific tape vendor name.
TMVolseq int CA1 CA-1-specific volume sequence number.
TMVolser char CA1 CA-1-specific volume serial number.
TMVsr bool CA1 CA-1-specific internal flag4 bit x'20'. Vault specificrequest.
UserBool1 bool Custom,Open
User-defined Boolean field for a volume.
UserBool10 bool Custom,Open
User-defined Boolean field for a volume.
UserBool2 bool Custom,Open
User-defined Boolean field for a volume.
UserBool3 bool Custom,Open
User-defined Boolean field for a volume.
UserBool4 bool Custom,Open
User-defined Boolean field for a volume.
UserBool5 bool Custom,Open
User-defined Boolean field for a volume.
UserBool6 bool Custom,Open
User-defined Boolean field for a volume.
UserBool7 bool Custom,Open
User-defined Boolean field for a volume.
UserBool8 bool Custom,Open
User-defined Boolean field for a volume.
UserBool9 bool Custom,Open
User-defined Boolean field for a volume.
UserChar1 char Custom,Open
User-defined character field for a volume.
UserChar10 char Custom,Open
User-defined character field for a volume.
UserChar2 char Custom,Open
User-defined character field for a volume.
UserChar3 char Custom,Open
User-defined character field for a volume.
UserChar4 char Custom,Open
User-defined character field for a volume.
UserChar5 char Custom,Open
User-defined character field for a volume.
UserChar6 char Custom,Open
User-defined character field for a volume.
UserChar7 char Custom,Open
User-defined character field for a volume.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 101
UserChar8 char Custom,Open
User-defined character field for a volume.
UserChar9 char Custom,Open
User-defined character field for a volume.
UserDate1 date Custom,Open
User-defined date field for a volume.
UserDate10 date Custom,Open
User-defined date field for a volume.
UserDate2 date Custom,Open
User-defined date field for a volume.
UserDate3 date Custom,Open
User-defined date field for a volume.
UserDate4 date Custom,Open
User-defined date field for a volume.
UserDate5 date Custom,Open
User-defined date field for a volume.
UserDate6 date Custom,Open
User-defined date field for a volume.
UserDate7 date Custom,Open
User-defined date field for a volume.
UserDate8 date Custom,Open
User-defined date field for a volume.
UserDate9 date Custom,Open
User-defined date field for a volume.
UserInt1 int Custom,Open
User-defined integer field for a volume.
UserInt10 int Custom,Open
User-defined integer field for a volume.
UserInt2 int Custom,Open
User-defined integer field for a volume.
UserInt3 int Custom,Open
User-defined integer field for a volume.
UserInt4 int Custom,Open
User-defined integer field for a volume.
UserInt5 int Custom,Open
User-defined integer field for a volume.
UserInt6 int Custom,Open
User-defined integer field for a volume.
UserInt7 int Custom,Open
User-defined integer field for a volume.
UserInt8 int Custom,Open
User-defined integer field for a volume.
UserInt9 int Custom,Open
User-defined integer field for a volume.
UserTime1 time Custom,Open
User-defined time field for a volume.
UserTime10 time Custom,Open
User-defined time field for a volume.
UserTime2 time Custom,Open
User-defined time field for a volume.
UserTime3 time Custom,Open
User-defined time field for a volume.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
102 LCM Quick Reference • Revision 01 • E60155-01
UserTime4 time Custom,Open
User-defined time field for a volume.
UserTime5 time Custom,Open
User-defined time field for a volume.
UserTime6 time Custom,Open
User-defined time field for a volume.
UserTime7 time Custom,Open
User-defined time field for a volume.
UserTime8 time Custom,Open
User-defined time field for a volume.
UserTime9 time Custom,Open
User-defined time field for a volume.
VaultAssignmentDate date HSC The Date the volume was first assigned to the ExternalVault.
VaultAssignmentTime time HSC Time the volume was first assigned to the ExternalVault.
VaultName char HSC The name of the vault.
VaultReturnDate date HSC The Date the volume can be returned to the ExternalVault.
VaultReturnTime time HSC Time the volume can be returned to the External Vault.
VaultSlot char HSC The assigned External Vault Slot value.
VolumeSequenceNumberVOLSEQ
int TMS The volume sequence number of the volume.
VTV bool VTV The volume is a Virtual Tape Volume (VTV), as reportedby VSM.
VTVCompressionPercentage int VTV This field is valid only if LCM is running with NCS 6.2or later.This is the difference between the uncompressed andcompressed VTV size expressed as a percentage of theuncompressed VTV size. For example, if a 100MB VTVcompresses to 40MB, then the compression percentagewill be given as 60%. A compression of 0% indicates thatno compression was possible on the VTV.
VTVConsolidated bool VTV This field is valid only if LCM is running with NCS 6.2or later.Indicates whether a VTV is currently consolidated.
VTVCopyTapePlex1 char VTV The first copy TapePlex for this VTV.
VTVCopyTapePlex2 char VTV The second copy TapePlex for this VTV.
VTVDuplexed bool VTV The VTV has at least 2 copies.
VTVFenced bool VTV This field is valid only if LCM is running with NCS 6.2or later.The VTV's state is unknown to VTSS.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 103
VTVInitialized bool VTV This field is valid only if LCM is running with NCS 6.2or later.The VTV has been initialized by VTSS.
VTVInvalidVTVDELVTVDELETEDVTVINV
bool VTV The VTV is invalid in VSM.
VTVManagementClassVTVMGMTCLASVTVMGTCLASS
char VTV The VSM management class for the VTV.
VTVMaximumSize int VTV This field is valid only if LCM is running with NCS 6.2or later.The maximum size of the VTV is 32GB.
VTVMigratedVTVMIG
bool VTV The VTV is migrated in VSM.
VTVMountedVTVMNTD
bool VTV The VTV is mounted according to VSM.
VTVMVCID1 char VTV The MVC volser on which the VTV resides.
VTVMVCID2 char VTV The MVC volser on which a duplicate or consolidationcopy of the VTV resides. Note: If the VTV isconsolidated during an LCM run, the value of this fieldwill be updated after the consolidation is performed.The POSTACTION value will reflect the consolidationMVC for this VTV.
VTVMVCID3 char VTV The MVC volser on which a duplicate or consolidationcopy of the VTV resides.
VTVMVCID4 char VTV The MVC volser on which a duplicate or consolidationcopy of the VTV resides.
VTVNewCreate bool VTV This field is valid only if LCM is running with NCS 6.2or later.Indicates whether the VTV was newly created when itwas last resident.
VTVOwningTapePlex char VTV The owning TapePlex for this VTV.
VTVPageSize char VTV The VTV Page Size
Large
Standard
VTVRecallDate date VTV This field is valid only if LCM is running with NCS 6.2or later.Date VTV was recalled to the VTSS buffer.
VTVRecallTime time VTV This field is valid only if LCM is running with NCS 6.2or later.Time VTV was recalled to the VTSS buffer.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
104 LCM Quick Reference • Revision 01 • E60155-01
VTVReplicationStatus char VTV This field is valid only if LCM is running with NCS 6.2or later.Status of VTV replication.
CReplication has completed.RReplication is required but not startedSReplication has started
VTVResident bool VTV This field is valid only if LCM is running with NCS 6.2or later.Indicates whether a VTV is resident in a VTSS.
VTVScratchVTVSCR
bool VTV The VTV is scratch, as recorded by VSM.
VTVSizeCompressed int VTV This field is valid only if LCM is running with NCS 6.2or later.The actual compressed size of the VTV in megabytes.
VTVSizeUncompressedVTVMediaSize
int VTV This field is valid only if LCM is running with NCS 6.2or later.The actual uncompressed size of the VTV in megabytes.
VTVTimesRead int VTV This field is valid only if LCM is running with NCS 6.2or later.The number of times the VTV has been read.
VTVUnavailableVTVUNAVAIL
bool VTV This field is valid only if LCM is running with NCS 6.2or later.The VTV is unavailable because it is either mounted,resident, or fenced according to VSM.
VTVVTSS char VTV The Virtual Tape SubSystem (VTSS) in which the VTVresides.
TABLE 3-2 SET METHOD Statement WHEN Fields
Field Type Source Description
E60155-01 • Revision 01 Chapter 3 105
REPORT LSM Statement FieldsTABLE 3-3 REPORT LSM Statement Fields
Field
TypeSizeSummary Source Report Heading Description
ACSID char (alternate)2none
HSC ACSID
The 2-digit hexadecimal number assigned tothe Automated Cartridge System.
AdditionalEntersADDNLEN
int7sum
HSC AdditionalEnters
The number of scratch volumes that need tobe entered in addition to the number LCMhas picked by volser.
CleanEntersCLNENTERS
int7sum
HSC CleanEnters
The total number of cleaning cartridges thatneed to be entered into the LSM.
Enters int7sum
HSC Enters The total number of volumes that need to beentered into the LSM.
FailedEjectsFEJ
int7sum
HSC FailedEjects
The number of volumes that failed to be beejected from the LSM. This field is onlymeaningful on a POSTACTION report.
FailedMoveInsFMOVEINS
int7sum
HSC FailedMoveIns
The number of volumes that failed to bemoved into the LSM. This field is onlymeaningful on a POSTACTION report.
FailedMoveOutsFMOVEOUTS
int7sum
HSC FailedMoveOuts
The number of volumes that failed to bemoved out of the LSM. This field is onlymeaningful on a POSTACTION report.
InitialAllVolumesIALLVOL
int7sum
HSC InitialAllVolumes
The total number of scratch and nonscratchvolumes in the LSM at the beginning of theLCM run.
InitialCleanICLN
int7sum
HSC InitialClean
The number of cleaning cartridges in theLSM at the beginning of the LCM run.
InitialFreeCellsIFCELL
int7sum
HSC InitialFreeCells
The number of free cells in the LSM at thebeginning of the LCM run.
InitialNonScratchINONSCR
int7sum
HSC InitialNonScratch
The total number of nonscratch volumes inthe LSM at the beginning of the LCM run.
InitialScratchISCR
int7sum
HSC InitialScratch
The total number of scratch volumes in theLSM at the beginning of the LCM run.
LSMGroupLSMGRP
char (alternate)10none
HSC LSMGroup
The LSM Group Name assigned to thevolume by the Management Method.
LSMID char (alternate)5none
HSC LSMID
The AA:LL form identifier (AA is the two-character hexadecimal ACS number and LLis the two-character hexadecimal LSMnumber) that uniquely identifies an LSM to ahost system.
106 LCM Quick Reference • Revision 01 • E60155-01
LSMName char (alternate)10none
HSC LSMName
The name given to the LSM by: Explorer: theLSM Names tab of the ACS object; ParameterFile: the Lsmid parameter of a Manage orUnmanaged statement.
ManagedLSMMANLSM
boolSee notes below.true
HSC ManagedLSM
The LSM is managed by this LCM run. Thisis specified by: Explorer: editing theproperties of an LSM Group listed on theLSM Group tab of a Run object; ParameterFile: coverage by a Manage statement.
PickedEntersPICKEDEN
int7sum
HSC PickedEnters
The number of scratch volumes LCM haspicked by volser to enter into the LSM.
PlannedCleanPCLN
int7sum
HSC PlannedClean
The planned number of cleaning cartridgesin the LSM at the end of the LCM run.
PlannedEjectsPEJ
int7sum
HSC PlannedEjects
The projected number of volumes that willbe ejected from the LSM.
PlannedFreeCellsPFCELL
int7sum
HSC PlannedFreeCells
The total number of free cells projected to bein the LSM after all scheduled cartridgemoves, ejects, and enters have beenperformed.
PlannedMoveInsPMOVEINS
int7sum
HSC PlannedMoveIns
The total number of volumes projected to bemoved into the LSM.
PlannedMoveOutsPMOVEOUTS
int7sum
HSC PlannedMoveOuts
The total number of volumes projected to bemoved out of the LSM.
PlannedNonScratchPNONSCR
int7sum
HSC PlannedNonScratch
The total number of nonscratch volumesLCM has projected to be in the LSM.
PlannedScratchPSCR
int7sum
HSC PlannedScratch
Total number of scratch volumes LCM hasprojected to be in the LSM.
PullListEntersPLENTERS
int7sum
HSC Pull ListEnters
The total number of Pull List volumes thatneed to be entered into the LSM.
ScratchEntersSCRENTERS
int7sum
HSC ScratchEnters
The total number of scratch volumes thatneed to be entered into the LSM.
StatusChangedSTCHG
int7sum
HSC StatusChanged
The total number of volumes whose scratchstatus was changed in the HSC CDS by theLCM run. It is possible for the same volumeto be scratched and unscratched in the sameLCM run. However, this field is onlyincremented once per volume.
StatusErrantSTERRANT
int7sum
HSC StatusErrant
The total number of volumes whose statuswas marked errant in the HSC CDS.
StatusExternalLabelSTEXTLBL
int7sum
HSC StatusExternalLabel
The total number of volumes whose statuswas marked as having an external label inthe HSC CDS.
TABLE 3-3 REPORT LSM Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 107
StatusNoExternalLabelSTNOEXTLBL
int7sum
HSC StatusNo ExternalLabel
The total number of volumes whose statuswas marked as having no external label inthe HSC CDS.
StatusNotUseableSTNTUSBL
int7sum
HSC StatusNotUseable
The total number of volumes whose statuswas marked not useable in the HSC CDS.
StatusOverMaxCleanSTOVRMXCLN
int7sum
HSC StatusOverMaxClean
The total number of volumes whose statuswas marked over max clean in the HSC CDS.
StatusScratchedSTSCRED
int7sum
HSC StatusScratched
The total number of volumes whose statuswas marked scratched in the HSC CDS.
StatusSelectedSTSELECT
int7sum
HSC StatusSelected
The total number of volumes whose statuswas marked selected in the HSC CDS.
StatusUnreadableLabelSTUNRDLBL
int7sum
HSC StatusUnreadableLabel
The total number of volumes whose statuswas marked as having an unreadable label inthe HSC CDS.
StatusUnscratchedSTUNSCRED
int7sum
HSC StatusUnscratched
The total number of volumes whose statuswas marked unscratched in the HSC CDS.
StatusWrongSTWRNG
int7sum
HSC StatusWrong
The total number of volumes whose scratchstatus in the HSC CDS is not correct.
SuccessfulEjectsSUCCEJ
int7sum
HSC SuccessfulEjects
The number of volumes that weresuccessfully ejected from the LSM. This fieldis only meaningful on a POSTACTIONreport.
SuccessfulMoveInsSUCCMOVEINS
int7sum
HSC SuccessfulMoveIns
The total number of volumes moved into theLSM. This field is only meaningful on aPOSTACTION report.
SuccessfulMoveOutsSUCCMOVEOUTS
int7sum
HSC SuccessfulMoveOuts
The total number of volumes moved out ofthe LSM. This field is only meaningful on aPOSTACTION report.
VolumesIgnoredVOLIGNRD
int7sum
HSC VolumesIgnored
The total number of volumes ignored. This isdetermined by: Explorer: the TMS tab of theSubpool object; Parameter File: the Ignoreparameter on the Subpool statement.
TABLE 3-3 REPORT LSM Statement Fields
Field
TypeSizeSummary Source Report Heading Description
108 LCM Quick Reference • Revision 01 • E60155-01
REPORT MVC_VTV Statement FieldsTABLE 3-4 Additional REPORT MVC_VTV Statement Fields
Field
TypeSizeSummary Source
ReportHeading Description
MVCVTVBlockCount int6sum
MVC_VTV MVC VTVBlockCount
The decimal number of blocks ofdata that the VTV occupies on theMVC.
MVCVTVBlockId char (alternate)8none
MVC_VTV MVC VTVBlockID
The logical block ID of the beginningof the VTV on the MVC.
MVCVTVConsolidationDate dateSee notes below.none
MVC_VTV MVC VTVConsolidationDate
The date on which the VTV wasconsolidated to the MVC as recordedby VSM.
MVCVTVMigrationDate dateSee notes below.none
MVC_VTV MVC VTVMigrationDate
The date on which the VTV wasmigrated to the MVC as recorded byVSM.
E60155-01 • Revision 01 Chapter 3 109
REPORT VOLUME Statement Fields
110 LCM Quick Reference • Revision 01 • E60155-01
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
ActionACT
char (alternate)12none
LCM Action The action planned to be taken on thevolume.
ConsolidatePlanned to consolidate the virtual tapevolume.EjectPlanned to eject the volume.EnterPlanned to enter the volume.ExportPlanned to export the virtual tape volume.KeepPlanned to keep the volume in the initialLSM.MigratePlanned to migrate the virtual tapevolume.MovePlanned to move the volume.NoneNo action planned.RecallPlanned to recall the virtual tape volume.ReclaimPlanned to reclaim space on the MVC.ScratchPlanned to set the scratch status for thevolume in the HSC CDS or VTCS toScratch.UnscratchPlanned to set the scratch status for thevolume in the HSC CDS or VTCS to NotScratch.
ActionReasonACTRSN
char (alternate)10none
LCM ActionReason
The reason the action was chosen.
ActionExplorer: Instructed by Action tab of Runobject. Parameter File: Instructed byAction statement.ClrFzPnlExplorer: The Action tab of the Run objectcaused this action to eject volumes frozenby the HSC. Parameter File: AClearFrozenPanels parameter caused thisaction to eject volumes frozen by the HSC.EjBadExplorer: The Action tab of the Run objectcaused this action to eject defectivevolumes. Parameter File: An EjBadparameter caused this action to ejectdefective volumes.MethodExplorer: A Method object conditioncaused LCM to perform this action.Parameter File: A Method statementattribute caused LCM to perform thisaction.NeedLCM planned this action in order to meetcriteria.PullListExplorer: A PullList object caused thisaction. Parameter File: A PullListstatement caused this action.
E60155-01 • Revision 01 Chapter 3 111
ActionStatusACTSTAT
char (alternate)40none
LCM ActionStatus
The final status of an action. This field isonly meaningful on a POSTACTIONreport.
Action performed successfully
Action was not necessary
LCM stop command was entered
No magazines in CAP
No room was available
not processed by VTCS
Reason is not known (see LCMLOG)
Reply to delay WTOR was ABORT orFAIL
Volume is in disconnected ACS
Volume is in manual mode LSM
Volume is in use by another host
Volume was errant when action attempted
Volume was mounted when actionattempted
Volume was recently used or selected
VTCS error (see LCMLOG)
VTCS PGMI (SWSPGMI) not available
VTCS request failed
VTCS task ended unexpectedly
BAAbdflg char1none
TLMS TLMSAbendFlag
TLMS-specific abend flag.
BAActive int5none
TLMS TLMSFileCount
TLMS-specific active file count.
BAAscbse char8none
TLMS TLMSAssociatedBase
TLMS-specific associated base.
BAAscvol char8none
TLMS TLMSAssociatedVolume
TLMS-specific associated volume.
BABlkcnt int5none
TLMS TLMSBlockCount
TLMS-specific block count.
BABlksiz int5none
TLMS TLMSBlockSize
TLMS-specific block size.
BABuydat dateSee notes below.none
TLMS TLMSPurchaseDate
TLMS-specific purchase date.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
112 LCM Quick Reference • Revision 01 • E60155-01
BACdsexp dateSee notes below.none
TLMS TLMSHighestExpire Date
TLMS-specific highest IBM expiration dateon volume.
BACdsflg char1none
TLMS TLMSCDSFlag
TLMS-specific controlling data set flag.
BACdskep dateSee notes below.none
TLMS TLMSHighestKeep Date
TLMS-specific highest keep date onvolume.
BACdsseq int5none
TLMS TLMSCDSSeq Num
TLMS-specific controlling data setsequence number.
BAChnvol char6none
TLMS TLMS1st VolumeIn Chain
TLMS-specific 1st volume in chain.
BACkptkn char1none
TLMS TLMSCheckpointTaken
TLMS-specific check point taken (Y=Yes;B=No).
BAClncnt int5none
TLMS TLMSCleaningsSince Cert
TLMS-specific cleanings since certified.
BAClndat dateSee notes below.none
TLMS TLMSCleanDate
TLMS-specific clean date.
BACpusmf char4none
TLMS TLMSCreationCPU SMFid
TLMS-specific creation CPU SMF ID.
BACredat dateSee notes below.none
TLMS TLMSCreateDate
TLMS-specific create date.
BACreddn char8none
TLMS TLMSCreationDdname
TLMS-specific creation ddname.
BACredev char (alternate)3none
TLMS TLMSCreationDrive
TLMS-specific creation drive.
BACrejob char8none
TLMS TLMSCreationJobname
TLMS-specific creation jobname.
BACrepgm char8none
TLMS TLMSCreationPgm
TLMS-specific creation program name.
BACrestp char8none
TLMS TLMSCreationStepname
TLMS-specific creation stepname.
BACretim timeSee notes below.none
TLMS TLMSCreationTime
TLMS-specific time of day the volume wascreated.
BACrtcnt int5none
TLMS TLMSTotalCerts
TLMS-specific total certifications.
BACrtdat dateSee notes below.none
TLMS TLMSCertificationDate
TLMS-specific certification date.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 113
BADamcde char1none
TLMS TLMSDamagedCode
TLMS-specific damaged code.
BADen char1none
TLMS TLMSDensity
TLMS-specific density.
BADescde char1none
TLMS TLMSDestroyedCode
TLMS-specific destroyed code.
BADesdat dateSee notes below.none
TLMS TLMSDestroyedDate
TLMS-specific destroyed date.
BADsn char44none
TLMS TLMSData SetName
TLMS-specific data set name.
BAErgcnt int5none
TLMS TLMSCurrentErase gaps
TLMS-specific current erase gaps onvolume.
BAErgmax int5none
TLMS TLMSMax EraseGaps
TLMS-specific max erase gaps on volume.
BAExpdat dateSee notes below.none
TLMS TLMSExpireDate
TLMS-specific IBM expiration date fordata set.
BAFilcnt int5none
TLMS TLMSFileCount
TLMS-specific file count.
BAFilseq int5none
TLMS TLMSFile SeqIn Chain
TLMS-specific file sequence in chain.
BAFlg001 int3none
TLMS TLMSReservedCA-1 Flag1
TLMS-specific reserved for CA-1 FLG001.
BAFlg003 int3none
TLMS TLMSReservedCA-1 Flag3
TLMS-specific reserved for CA-1 FLG003.
BAFlg004 int3none
TLMS TLMSReservedCA-1 Flag4
TLMS-specific reserved for CA-1 FLG004.
BAFlg005 int3none
TLMS TLMSReservedTLMS Flag5
TLMS-specific reserved for TLMS FLG005.
BAFlg006 int3none
TLMS TLMSReservedTLMS Flag6
TLMS-specific reserved for TLMS FLG006.
BAKepdat dateSee notes below.none
TLMS TLMSKeepDate
TLMS-specific keep date for data set.
BALabtyp char1none
TLMS TLMSLabelType
TLMS-specific label type.
BALasdat dateSee notes below.none
TLMS TLMSLast UsedDate
TLMS-specific last used date.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
114 LCM Quick Reference • Revision 01 • E60155-01
BALasdev char (alternate)3none
TLMS TLMSLast UsedDrive
TLMS-specific last used drive.
BALasjob char8none
TLMS TLMSLast UsedJobname
TLMS-specific last used jobname.
BALoc char2none
TLMS TLMSVolumeLocation
TLMS-specific volume location.
BALoscde char1none
TLMS TLMSLostCode
TLMS-specific lost code.
BAMds1st char (alternate)8none
TLMS TLMSMulti-dsnFirst Ptr
TLMS-specific multi-dataset first chainpointer.
BAMdslst char (alternate)8none
TLMS TLMSMulti-dsnLast Ptr
TLMS-specific multi-dataset last chainpointer.
BAMovdat dateSee notes below.none
TLMS TLMSDateMoved
TLMS-specific date volume moved.
BAMvlcnt int5none
TLMS TLMSBAMvltabVolume Count
TLMS-specific count of volumes inBAMvltab.
BAMvlseq1 int5none
TLMS TLMSMulti-volSeq Num 1
TLMS-specific multi-volume sequencenumber 1.
BAMvlseq2 int5none
TLMS TLMSMulti-volSeq Num 2
TLMS-specific multi-volume sequencenumber 2.
BAMvlseq3 int5none
TLMS TLMSMulti-volSeq Num 3
TLMS-specific multi-volume sequencenumber 3.
BAMvlseq4 int5none
TLMS TLMSMulti-volSeq Num 4
TLMS-specific multi-volume sequencenumber 4.
BAMvlseq5 int5none
TLMS TLMSMulti-volSeq Num 5
TLMS-specific multi-volume sequencenumber 5.
BAMvlvol1 char6none
TLMS TLMSMulti-volSerial 1
TLMS-specific multi-volume chain serialnumber 1.
BAMvlvol2 char6none
TLMS TLMSMulti-volSerial 2
TLMS-specific multi-volume chain serialnumber 2.
BAMvlvol3 char6none
TLMS TLMSMulti-volSerial 3
TLMS-specific multi-volume chain serialnumber 3.
BAMvlvol4 char6none
TLMS TLMSMulti-volSerial 4
TLMS-specific multi-volume chain serialnumber 4.
BAMvlvol5 char6none
TLMS TLMSMulti-volSerial 5
TLMS-specific multi-volume chain serialnumber 5.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 115
BAOutsrv char4none
TLMS TLMSOut of ServiceCode
TLMS-specific out of service code.Contains BALoscde, BADamcde, andBADescde.
BARecsiz int5none
TLMS TLMSLRECL
TLMS-specific logical record length.
BARederr int5none
TLMS TLMSTemporaryRead Errors
TLMS-specific current temporary readerrors.
BARfm char3none
TLMS TLMSRecordFormat
TLMS-specific record format.
BARtncnt1 int5none
TLMS TLMSRetentionCount - 1
TLMS-specific retention count forretention entry 1.
BARtncnt2 int5none
TLMS TLMSRetentionCount - 2
TLMS-specific retention count forretention entry 2.
BARtncnt3 int5none
TLMS TLMSRetentionCount - 3
TLMS-specific retention count forretention entry 3.
BARtncnt4 int5none
TLMS TLMSRetentionCount - 4
TLMS-specific retention count forretention entry 4.
BARtncnt5 int5none
TLMS TLMSRetentionCount - 5
TLMS-specific retention count forretention entry 5.
BARtncnt6 int5none
TLMS TLMSRetentionCount - 6
TLMS-specific retention count forretention entry 6.
BARtndev char4none
TLMS TLMSCabinetSlot
TLMS-specific box or cabinet/slot.
BARtnLoc1 char2none
TLMS TLMSRetentionLoc - 1
TLMS-specific user retention location forretention entry 1.
BARtnLoc2 char2none
TLMS TLMSRetentionLoc - 2
TLMS-specific user retention location forretention entry 2.
BARtnLoc3 char2none
TLMS TLMSRetentionLoc - 3
TLMS-specific user retention location forretention entry 3.
BARtnLoc4 char2none
TLMS TLMSRetentionLoc - 4
TLMS-specific user retention location forretention entry 4.
BARtnLoc5 char2none
TLMS TLMSRetentionLoc - 5
TLMS-specific user retention location forretention entry 5.
BARtnLoc6 char2none
TLMS TLMSRetentionLoc - 6
TLMS-specific user retention location forretention entry 6.
BARtnptr char1none
TLMS TLMSRetentionEntry
TLMS-specific offset of active retentionentry.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
116 LCM Quick Reference • Revision 01 • E60155-01
BARtnsrc char1none
TLMS TLMSRetentionSource
TLMS-specific retention source. ' ' (blank)= No retention data; '1' = From RMF; '2' =From JCL; '3' = From manual update.
BARtntyp1 char1none
TLMS TLMSRetentionType - 1
TLMS-specific user retention type forretention entry 1. '1' = Catalog control; '2'= Date control; '3' = Catalog and age; '4' =Cycle control; '5' = Age; '6' = Moveimmediate control; '7' = Manual control; '8'= Days since last used; '9' = Expirationdate.
BARtntyp2 char1none
TLMS TLMSRetentionType - 2
TLMS-specific user retention type forretention entry 2. '1' = Catalog control; '2'= Date control; '3' = Catalog and age; '4' =Cycle control; '5' = Age; '6' = Moveimmediate control; '7' = Manual control; '8'= Days since last used; '9' = Expirationdate.
BARtntyp3 char1none
TLMS TLMSRetentionType - 3
TLMS-specific user retention type forretention entry 3. '1' = Catalog control; '2'= Date control; '3' = Catalog and age; '4' =Cycle control; '5' = Age; '6' = Moveimmediate control; '7' = Manual control; '8'= Days since last used; '9' = Expirationdate.
BARtntyp4 char1none
TLMS TLMSRetentionType - 4
TLMS-specific user retention type forretention entry 4. '1' = Catalog control; '2'= Date control; '3' = Catalog and age; '4' =Cycle control; '5' = Age; '6' = Moveimmediate control; '7' = Manual control; '8'= Days since last used; '9' = Expirationdate.
BARtntyp5 char1none
TLMS TLMSRetentionType - 5
TLMS-specific user retention type forretention entry 5. '1' = Catalog control; '2'= Date control; '3' = Catalog and age; '4' =Cycle control; '5' = Age; '6' = Moveimmediate control; '7' = Manual control; '8'= Days since last used; '9' = Expirationdate.
BARtntyp6 char1none
TLMS TLMSRetentionType - 6
TLMS-specific user retention type forretention entry 6. '1' = Catalog control; '2'= Date control; '3' = Catalog and age; '4' =Cycle control; '5' = Age; '6' = Moveimmediate control; '7' = Manual control; '8'= Days since last used; '9' = Expirationdate.
BAScrdat dateSee notes below.none
TLMS TLMSScratchDate
TLMS-specific date volume scratched.
BAScruid char1none
TLMS TLMSScratchedID
TLMS-specific scratched by ID. '1' = TRS;'2' = JCL; '3' = Manual; '4' = External datamanager.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 117
BaseName char44none
TMS Base Name The controlling data set name of thevolume. If the data set is a member of aGeneration Data Group, only the basename (no .GnnnnVnn) is included.
BASmsmgt char8none
TLMS TLMSMgmtClass
TLMS-specific SMS management class
BASpcchn char1none
TLMS TLMSSpecialChaining
TLMS-specific special chaining (chainedfor moves).
BASpnflg char1none
TLMS TLMSSpannedFlag
TLMS-specific spanned data set flag (1=spanned).
BASrvscr char1none
TLMS TLMSServ/ScrIndicator
TLMS-specific service/scratch indicator. '0'= Skipped segment record; '1' = Inservice/Non scratch; '2' = Inservice/Scratch; '3' = Out service/Nonscratch; '4' = Out Service/Scratch.
BATaplen int5none
TLMS TLMSTapeLength
TLMS-specific tape length.
BATapmod char1none
TLMS TLMSRecordingTechnique
TLMS-specific track recording technique.
BATaptyp char2none
TLMS TLMSTapeType
TLMS-specific tape type.
BATrspro char1none
TLMS TLMSTRSProcessed
TLMS-specific TRS has processed thisvolume.
BAUnisrt int5none
TLMS TLMSSortUnique
TLMS-specific sort unique code.
BAUsebuy int5none
TLMS TLMSUses SincePurchased
TLMS-specific uses since purchased.
BAUsecln int5none
TLMS TLMSUses SinceCleaned
TLMS-specific uses since cleaned.
BAUsecrt int5none
TLMS TLMSUses SinceCertified
TLMS-specific uses since certified.
BAUsr001 char15none
TLMS TLMSJobAccounting
TLMS-specific user data. (Defaults to jobaccounting - TCB).
BAUsr002 char15none
TLMS TLMSProgrammerName
TLMS-specific user data. (Defaults toprogrammer name - TCB).
BAUsr003 char29none
TLMS TLMSUserData
TLMS-specific user data area.
BAVender char8none
TLMS TLMSManufacturerCode
TLMS-specific user updated manufacturercode.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
118 LCM Quick Reference • Revision 01 • E60155-01
BAVol1st char (alternate)8none
TLMS TLMSMulti-volFirst Ptr
TLMS-specific multi-volume first volumeserial number pointer.
BAVolcnt int5none
TLMS TLMSVolumeCount
TLMS-specific volume count.
BAVollst char (alternate)8none
TLMS TLMSMulti-VolLast Ptr
TLMS-specific multi-volume last chainpointer.
BAVolown char8none
TLMS TLMSVolumeOwner
TLMS-specific volume owner.
BAVolseq int5none
TLMS TLMSVolumeSeq
TLMS-specific volume sequence number.
BAVolser char6none
TLMS TLMSVolumeSerial
TLMS-specific volume serial number
ClassificationCLS
char (alternate)10none
HSC,MVC,TMS,VTV
Classification Classification of the volume.
BadScratchVolumes marked defective and scratch inTMSCleanVolumes with the HSC cleaning prefixExpiredVolumes marked not scratch and expiredin TMSNonScratchVolumes not scratch, badscratch, expired,or cleanScratchVolumes available for receiving new tapedata sets
CleanCLN
boolSee notes below.true
LCM CleaningCartridge
This volume is a cleaning cartridge.
ConsolidationGroupNameCONSGRPNAME
char8none
MVC,VTV
ConsolidationGroup Name
The consolidation group name for theVTV.
Copy int4none
TMS Copy Copy number of the volume. A value of 1refers to the most recently created copy ofthe data set according to the tapemanagement system, 2 refers to the nextmost recently created copy, and so on.
CreatingTMSDriveCTDRIVE
char (alternate)4none
TMS CreatingDrive
The unit address of the tape drive onwhich the tape data set was created,printed as a hexadecimal character string.
CreationDateCDATE
dateSee notes below.none
MVC,TMS,VTV
CreationDate
The date the volume was created. The firstavailable field of the following determinesthe creation date: CreationTMSDate,CreationVTVDate, CreationMVCDate.
CreationJobNameCJOBNAMEJOBNAME
char8none
TMS CreationJob Name
The JCL job name that created the volume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 119
CreationMVCDateCMDATE
dateSee notes below.none
MVC CreationMVCDate
The date the volume was created asrecorded by VSM.
CreationMVCTimeCMTIME
timeSee notes below.none
MVC CreationMVCTime
The time of day the volume was created asrecorded by VSM.
CreationStepNameCSTEPNAMESTEPNAME
char8none
TMS CreationStep Name
The JCL step name that created thevolume.
CreationTimeCTIME
timeSee notes below.none
MVC,TMS,VTV
CreationTime
The time of day the volume was created.The first available field of the followingdetermines the creation time:CreationTMSTime, CreationVTVTime,CreationMVCTime.
CreationTMSDateCTDATE
dateSee notes below.none
TMS CreationTMSDate
The date the volume was created asrecorded in the associated tapemanagement system.
CreationTMSTimeCTTIME
timeSee notes below.none
TMS CreationTMSTime
The time of day the volume was created asrecorded in the associated tapemanagement system.
CreationVTVDateCVDATE
dateSee notes below.none
VTV CreationVTVDate
The date the volume was created asrecorded by VSM.
CreationVTVTimeCVTIME
timeSee notes below.none
VTV CreationVTVTime
The time of day the volume was created asrecorded by VSM.
CTAccount char50none
ControlT ControlTAccountInformation
Control-T-specific accounting information
CTActiveds int4none
ControlT ControlTActiveLabels
Control-T-specific number of active labelson volume.
CTBlksize int8none
ControlT ControlTBlockSize
Control-T-specific block size.
CTBlockct int8none
ControlT ControlTBlockCount
Control-T-specific block count.
CTBoxid char6none
ControlT ControlTBoxID
Control-T-specific box ID.
CTChkindt dateSee notes below.none
ControlT ControlTCheckinDate
Control-T-specific volume check-in date.
CTClncount int8sum
ControlT ControlTCleanCount
Control-T-specific clean count
CTCrecpu char8none
ControlT ControlTCreateCPU Name
Control-T-specific creation CPU name.
CTCreddn char8none
ControlT ControlTCreateDD Name
Control-T-specific creation DD name.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
120 LCM Quick Reference • Revision 01 • E60155-01
CTCredt dateSee notes below.none
ControlT ControlTCreationDate
Control-T-specific creation date.
CTCrejbn char8none
ControlT ControlTCreateJobname
Control-T-specific creation job name.
CTCrepgm char8none
ControlT ControlTCreateProgram Name
Control-T-specific creation program name.
CTCrestep char8none
ControlT ControlTCreateStepname
Control-T-specific creation stepname.
CTCretm timeSee notes below.none
ControlT ControlTCreationTime
Control-T-specific creation time
CTCreuad char (alternate)4none
ControlT ControlTCreateUnit Address
Control-T-specific creation unit address.
CTDdsexpd1 dateSee notes below.none
ControlT ControlTFirst ExpirationDate
Control-T-specific first expiration date.
CTDdsexpd2 dateSee notes below.none
ControlT ControlTSecond ExpirationDate
Control-T-specific second expiration date.
CTDdsexpd3 dateSee notes below.none
ControlT ControlTThird ExpirationDate
Control-T-specific third expiration date.
CTDeleted boolSee notes below.none
ControlT ControlTDeleted
Control-T-specific volume marked asdeleted.
CTDsname char44none
ControlT ControlTData SetName
Control-T-specific data set name.
CTDsvolser char6none
ControlT ControlTFirstData Set
Control-T-specific first data set begins onvolume.
CTDyndef boolSee notes below.none
ControlT ControlTDynamicallyDefined
Control-T-specific volume dynamicallyadded.
CTEdm boolSee notes below.none
ControlT ControlTEDM
Control-T-specific volume managed by anExternal Data Manager.
CTExprtrn dateSee notes below.none
ControlT ControlTReturnDate
Control-T-specific expected return datefrom out location.
CTExtdel boolSee notes below.none
ControlT ControlTExpireDelete
Control-T-specific volume will be deletedwhen expired.
CTExternal boolSee notes below.none
ControlT ControlTExternalVolume
Control-T-specific external volume.
CTFirstvol char6none
ControlT ControlTFirstVolume
Control-T-specific first volume in themulti-volume group.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 121
CTHold boolSee notes below.none
ControlT ControlTHold
Control-T-specific volume is in the mainlibrary due to recall operation.
CTInatl boolSee notes below.none
ControlT ControlTTapeLibrary
Control-T-specific volume resides inside arobotic tape library.
CTInuse boolSee notes below.none
ControlT ControlTInUse
Control-T-specific volume currently in use.
CTIoerprm int4sum
ControlT ControlTPermanentRead Errors
Control-T-specific permanent read errors.
CTIoerprmc int4sum
ControlT ControlTPerm ReadErrors Clean
Control-T-specific permanent read errorssince last clean.
CTIoertmp int4sum
ControlT ControlTTemporaryRead Errors
Control-T-specific temporary read errors.
CTIoertmpc int4sum
ControlT ControlTTemp ReadErrors Clean
Control-T-specific temporary read errorssince last clean
CTIoewprm int4sum
ControlT ControlTPermanentWrite Errors
Control-T-specific permanent write errors.
CTIoewprmc int4sum
ControlT ControlTPerm WriteErrors Clean
Control-T-specific permanent write errorssince last clean.
CTIoewtmp int4sum
ControlT ControlTTemporaryWrite Errors
Control-T-specific temporary write errors.
CTIoewtmpc int4sum
ControlT ControlTTemp WriteErrors Clean
Control-T-specific temporary write errorssince last clean.
CTLaccdt dateSee notes below.none
ControlT ControlTJobDate
Control-T-specific last access job date.
CTLaccjbn char8none
ControlT ControlTJobname
Control-T-specific last job name thataccessed the volume.
CTLacctm timeSee notes below.none
ControlT ControlTJobTime
Control-T-specific last access job time.
CTLblnum int4none
ControlT ControlTLabelNumber
Control-T-specific highest label number onvolume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
122 LCM Quick Reference • Revision 01 • E60155-01
CTLbltyp char3none
ControlT ControlTLabelType
Control-T-specific label type
AL
AUL
BLP
NL
NSL
SL
SUL
CTLclndt dateSee notes below.none
ControlT ControlTCleanDate
Control-T-specific last clean date.
CTLibrary char8none
ControlT ControlTLibrary
Control-T-specific robotic tape libraryname.
CTLocation char8none
ControlT ControlTLocation
Control-T-specific current location ofvolume.
CTLocseq int4none
ControlT ControlTSequenceNumber
Control-T-specific current vault sequencenumber.
CTLrecl int5none
ControlT ControlTRecordLength
Control-T-specific record length.
CTManvlt boolSee notes below.none
ControlT ControlTManuallyVaulted
Control-T-specific volume manuallymoved to vault.
CTMedia char8none
ControlT ControlTMedia
Control-T-specific media name
CTMovedate dateSee notes below.none
ControlT ControlTMoveDate
Control-T-specific move date.
CTNextvol char6none
ControlT ControlTNextVolume
Control-T-specific next volume in themulti-volume group.
CTNostack boolSee notes below.none
ControlT ControlTNoStacking
Control-T-specific volume cannot be acandidate for dynamic stacking.
CTOut boolSee notes below.none
ControlT ControlTOutsideLibrary
Control-T-specific volume outside themain library.
CTPendscr boolSee notes below.none
ControlT ControlTPendingScratch
Control-T-specific pending scratch status.
CTPendvlt boolSee notes below.none
ControlT ControlTPendingVault
Control-T-specific pending vault.
CTPrevvol char6none
ControlT ControlTPreviousVolume
Control-T-specific previous volume in themulti-volume group.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 123
CTPvlt boolSee notes below.none
ControlT ControlTPotenialVault
Control-T-specific potential vault.
CTRecall boolSee notes below.none
ControlT ControlTRecall
Control-T-specific volume will recall backto main library.
CTRecfm char3none
ControlT ControlTRecordFormat
Control-T-specific record format.
A
B
D
F
FB
FBA
FBM
FBS
M
S
U
V
VB
VBA
VBM
VBS
VS
CTRecfrom char8none
ControlT ControlTRecalledFrom Vault
Control-T-specific vault name recalledfrom.
CTRecreate boolSee notes below.none
ControlT ControlTRecreated
Control-T-specific dataset recreated.
CTReturnvl boolSee notes below.none
ControlT ControlTReturn FromVault
Control-T-specific volume returned fromvault.
CTRetvltdt dateSee notes below.none
ControlT ControlTReturn toVault Date
Control-T-specific date to return to vault.
CTScratch boolSee notes below.none
ControlT ControlTScratch
Control-T-specific volume scratch status.
CTScrdt dateSee notes below.none
ControlT ControlTScratchDate
Control-T-specific volume scratch date.
CTSlname char6none
ControlT ControlTSLName
Control-T-specific SL name.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
124 LCM Quick Reference • Revision 01 • E60155-01
CTSlotnum int8none
ControlT ControlTSlotNumber
Control-T-specific slot number
CTSmsmc char8none
ControlT ControlTSMS ManagementClass
Control-T-specific SMS management class.
CTSmssg char8none
ControlT ControlTSMS StorageGroup
Control-T-specific SMS storage group.
CTVabend boolSee notes below.none
ControlT ControlTVolumeAbend
Control-T-specific incomplete data set onvolume.
CTVault char8none
ControlT ControlTFirstVault Name
Control-T-specific first vault name.
CTVault2 char8none
ControlT ControlTSecondVault Name
Control-T-specific second vault name.
CTVault3 char8none
ControlT ControlTThirdVault Name
Control-T-specific third vault name.
CTVaulted boolSee notes below.none
ControlT ControlTVaulted
Control-T-specific vaulted.
CTVendor char8none
ControlT ControlTVendor
Control-T-specific volume's vendor name
CTVformat char8none
ControlT ControlTVolumeFormat
Control-T-specific volume format
CTVfreekb int8none
ControlT ControlTFreeKB
Control-T-specific free kilo-bytes onvolume.
CTVlrstrt boolSee notes below.none
ControlT ControlTRestart
Control-T-specific volume processedunder MVS restart.
CTVltentdt dateSee notes below.none
ControlT ControlTEntryDate
Control-T-specific vault entry date.
CTVltexpdt dateSee notes below.none
ControlT ControlTVault ExpirationDate
Control-T-specific vault expiration date.
CTVoledmid char4none
ControlT ControlTEDMID
Control-T-specific volume's External DataManager ID.
CTVolexcp int8sum
ControlT ControlTEXCPCount
Control-T-specific EXCP Count
CTVolexpdt dateSee notes below.none
ControlT ControlTExpireDate
Control-T-specific volume expiration date.
CTVolodesc char20none
ControlT ControlTDescription
Control-T-specific volume userdescription.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 125
CTVolowner char8none
ControlT ControlTOwner
Control-T-specific volume owner
CTVolseq int5none
ControlT ControlTVolseqNumber
Control-T-specific volume sequencenumber in a multi-volume group.
CTVolser char6none
ControlT ControlTVolumeSerial
Control-T-specific volume serial number.
CTVolsnum int4none
ControlT ControlTNumber OfVolumes
Control-T-specific number volumes dataset resides on.
CTVoltype char1none
ControlT ControlTVolumeType
Control-T-specific volume type.
L
P
CTVolusect int8none
ControlT ControlTUse CountSince Scratch
Control-T-specific volume use count sincelast scratch.
CTVolusetc int8none
ControlT ControlTUseCount
Control-T-specific volume use count.
CTVstkgrp char8none
ControlT ControlTStackingGroup
Control-T-specific stacking group name.
CTVusedkb int8none
ControlT ControlTUsedKB
Control-T-specific Used kilo-bytes onvolume.
CycleDateCYDATE
dateSee notes below.none
TMS CycleDate
The date used by LCM for CYCLESOONprocessing. If missing, LCM does notperform CYCLESOON processing on thisvolume.
DataSetIdentifierDSID
char44none
TMS Data Set Identifier The most specific matching data setidentifier found for the data set name onthe Data Set tab of the Methods folder(Explorer) or a DATASET statement(Parameter File).
DataSetNameDSN
char44none
TMS Data Set Name The controlling data set name of thevolume. If the data set is a member of aGeneration Data Group, the .GnnnnVnnqualifier is included.
DataSetReportDSRPT
boolSee notes below.true
LCM DataSetReport
This volume is covered by the Data Set tabof the Methods folder (Explorer) or aDATASET statement (Parameter File) andis flagged for reporting.
DaysSinceCreationCDAYS
int5avg
MVC,TMS,VTV
DaysSinceCreation
The number of days since the data set wascreated. The first available field of thefollowing determines the days sincecreation: DaysSinceCreationTMS,DaysSinceCreationMVC,DaysSinceCreationVTV.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
126 LCM Quick Reference • Revision 01 • E60155-01
DaysSinceCreationMVCCMDAYS
int5avg
MVC DaysSinceCreation MVC
The number of days since the data set wascreated as recorded by VSM.
DaysSinceCreationTMSCTDAYS
int5avg
TMS DaysSinceCreation TMS
The number of days since the data set wascreated as recorded in the associated tapemanagement system.
DaysSinceCreationVTVCVDAYS
int5avg
VTV DaysSinceCreation VTV
The number of days since the data set wascreated as recorded by VSM.
DaysSinceEnterEDAYS
int5avg
HSC DaysSinceEnter
The number of days since the volume wasentered into an LSM. If all volumes of amulti-volume data set are covered by thesame Management Method, the mostrecent enter day for any volume is used byLCM for all volumes in the multi-volumedata set.
DaysSinceLocationLDAYSLOCDAYS
int5avg
TMS DaysSinceLocation
The number of days since the tape wasmoved to a tape storage location.
DaysSinceMountMDAYS
int5avg
HSC DaysSinceMount
The number of days since the HSC lastmounted the volume.
DaysSinceReferenceRDAYS
int5avg
HSC,MVC,TMS,VTV
DaysSinceRef.
The number of days since reference for thevolume as used by LCM. The firstavailable field of the following determinesthe reference day:DaysSinceReferenceTMS,DaysSinceReferenceVTV,DaysSinceReferenceMVC,DaysSinceMount, DaysSinceSelect. If allvolumes of a multi-volume data set arecovered by the same ManagementMethod, the most recent reference day forany volume is used by LCM for allvolumes in the multi-volume data set.
DaysSinceReferenceMVCRMDAYS
int5avg
MVC DaysSinceRef MVC
The number of days since reference asrecorded by VSM for an MVC (MultipleVolume Cartridge)
DaysSinceReferenceTMSRTDAYS
int5avg
TMS DaysSinceRef TMS
The number of days since reference asrecorded in the associated tapemanagement system for volumes beingtreated as a unit (Multi-volume support).
DaysSinceReferenceVTVRVDAYS
int5avg
VTV DaysSinceRef VTV
The number of days since reference asrecorded by VSM for a VTV (Virtual TapeVolume)
DaysSinceResidentVTV int 5 VTCS Days Since Resident The number of days since the VTV hasbeen resident in the VTSS buffer. Thismay be the number of days since the VTVwas created or the last time it was recalledto the buffer.
DaysSinceSelectSDAYS
int5avg
HSC DaysSinceSelect
The number of days since the volume wasselected by the HSC.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 127
DaysTillCycleCYDAYSDAYSTILLEXPIREXDAYS
int5avg
TMS DaysTillCycle
The number of days LCM uses forCYCLESOON processing. If missing, LCMwill not perform CYCLESOON processingon this volume.
Deleted boolSee notes below.true
TMS Deleted The volume is marked deleted in the tapemanagement system. Note: The value ofthis field is false for all volumes known toLCM unless: Explorer: The checkbox onthe Deleted tab of the TMS object is notchecked; Parameter File: theNODELETECHECK parameter is specifiedon the TMS statement.
EjectViaLSMGroupEJLSMGRP
char (alternate)10none
LCM EjectViaLSM Group
The LSM Group from which LCM plans toeject the volume.
EjectViaLSMIDEJLSMID
char (alternate)5none
LCM EjectViaLSM ID
The LSM ID from which LCM plans toeject the volume.
EjectViaLSMNameEJLSMNAME
char (alternate)10none
LCM EjectViaLSM Name
The Name of the LSM from which LCMplans to eject the volume.
Encrypted char 5 HSC Encrypted A value of 'Yes' indicates this volume isencrypted. 'No' indicates the volume isnot encrypted. 'Unknown' indicates theencrypted status is not able to bedetermined.
EnterDateENDATE
dateSee notes below.none
HSC EnterDate
The date the volume was entered into anLSM. If all volumes of a multi-volumedata set are covered by the sameManagement Method, the most recententer date of any volume is used by LCMfor all volumes in the multi-volume dataset.
EnterTimeENTIME
timeSee notes below.none
HSC EnterTime
The time of day the volume was entered.
Errant boolSee notes below.true
HSC Errant The HSC has marked this volume errant.Requires HSC PTF L1H10CC (HSC 4.0) orL1H10CE (HSC 4.1) to produce accurateinformation.
ExLblReadableEXLBLRD
boolSee notes below.true
HSC External LabelOCR Readable
The cartridge external label is OCRreadable.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
128 LCM Quick Reference • Revision 01 • E60155-01
ExpireDateEXPDTXDATE
dateSee notes below.none
TMS ExpireDate
The date the volume will expire based onthe expiration date in the tapemanagement system. Special expire datesare: AGE/nnn - Expires nnn days fromcreate or move date; CATLG - Expireswhen the data set name no longer exists inthe MVS system catalog, regardless of thekeep date; CATLG/nnn - Expires nnndays after creation and the data set nolonger resides in the MVS catalog;CYCLE/nnn - Oldest data set expires afternnn cycles; FOREIGN - Foreign volume;LDATE/nnn - Expires nnn days after lastused; MSG/nnn - TMS user-defined;PERM - Never expires; STATS/nnn -Never expires; USER/nnn - Never expires;ZEROS - CA-TLMS value was zeros; Juliandate - Expires on the julian date.
ExternalLabelEXLBL
boolSee notes below.true
HSC ExternalLabel
The cartridge has an external label.
ExternallyManagedEXTERNAL
boolSee notes below.true
TMS ExternallyManaged
The volume is defined to the tapemanagement system, but its use iscontrolled by some other software system.
FrozenToLSMGroup boolSee notes below.true
LCM Frozen ToLSM Group
The volume has both EJECT(NO) and aspecific LSMGRP assigned by itsManagement Method.
GDG boolSee notes below.true
TMS GDG The volume is a member of a GenerationData Group.
GDGWrap boolSee notes below.true
TMS GDGWrap
The volume is a member of a GenerationData Group where the Gnnnn number haswrapped from 9999 to 0001.
GenerationGEN
int5none
TMS GenerationNumber
The relative generation number + 1, basedon the tape management system.
Held boolSee notes below.true
HSC,LCM,TMS
Held The nonscratch volume will not be ejectedbecause one of the Held flags was on.Possible held reasons are: Cyclesoon,Minenter, Minref, or Pulllist.
HeldForCycleSoonHCYLSOON
boolSee notes below.true
TMS Held ForCyclesoon
The nonscratch volume will not be ejectedbecause the controlling data set is due toexpire within a specified number of days.Controlled by: Explorer: Methods folderLimits tab; Parameter File: theCYCLESOON parameter on the OPTIONSstatement.
HeldForMinEnterHMINENT
boolSee notes below.true
HSC Held ForMinEnter
The nonscratch volume will not be ejectedbecause it was entered into an LSM withina specified number of days. This isdetermined by: Explorer: Methods folderLimits tab; Parameter File: the MINENTERparameter on the OPTIONS statement.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 129
HeldForMinRefHMINREF
boolSee notes below.true
HSC,MVC,TMS,VTV
Held ForMinRef
The nonscratch volume will not be ejectedbecause it has been referenced within aspecified number of days. This isdetermined by: Explorer: Methods folderLimits tab; Parameter File: the MINREFparameter on the OPTIONS statement.
HeldForPullListHPULLLIST
boolSee notes below.true
LCM Held ForPullList
The nonscratch volume will not be ejectedbecause it was found on a Pull List.
HoursSinceCreationVTVCVHOURS
int5avg
VTV HoursSinceCreation VTV
The number of hours since creation asrecorded by VSM for a VTV (Virtual TapeVolume).
HoursSinceReferenceVTVRVHOURS
int5avg
VTV HoursSinceRef VTV
The number of hours since reference asrecorded by VSM for a VTV (Virtual TapeVolume).
HSCScratchHSCSCR
boolSee notes below.true
HSC HSCScratch
The status recorded by the HSC for thevolume is scratch.
Ignored boolSee notes below.true
LCM Ignored LCM does not retain any tapemanagement system information for thisvolume and will not eject or move thisvolume. This is determined by: Explorer:the TMS tab of the Subpool object;Parameter File: the IGNORE parameter onthe SUBPOOL statement.
InitialACSIDIACSID
char (alternate)2none
HSC,MVC
InitialACS ID
The ACS ID in which the volume residedat the beginning of the LCM run.
InitialLSMCellILSMCELL
char (alternate)14none
HSC InitialLSM Cell
The coordinates of the LSM Cell where thevolume resided at the beginning of theLCM run.
InitialLSMColumnILSMCOL
int2none
HSC InitialLSMColumn
The LSM Column number where thevolume resided at the beginning of theLCM run.
InitialLSMGroupILSMGRP
char (alternate)10none
LCM InitialLSM Group
The name of the LSM Group where thevolume resided at the beginning of theLCM run.
InitialLSMIDILSMID
char (alternate)5none
HSC,MVC
InitialLSM ID
The LSM ID where the volume resided atthe beginning of the LCM run.
InitialLSMNameILSMNAME
char (alternate)10none
LCM InitialLSM Name
The Name of the LSM where the volumeresided at the beginning of the LCM run.
InitialLSMPanelILSMPNL
int2none
HSC InitialLSMPanel
The LSM Panel number where the volumeresided at the beginning of the LCM run.
InitialLSMPanelFrozenILSMPNLFZ
boolSee notes below.true
HSC InitialLSM PanelFrozen
The volume resided in a frozen panel atthe beginning of the LCM run.
InitialLSMRowILSMROW
int2none
HSC InitialLSMRow
The LSM Row number where the volumeresided at the beginning of the LCM run.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
130 LCM Quick Reference • Revision 01 • E60155-01
InLSM boolSee notes below.true
HSC,MVC
InLSM
The volume is in an LSM at the beginningof an LCM run.
InManagedLSMINMANLSM
boolSee notes below.true
LCM InManagedLSM
The volume is in a MANAGEd LSM at thebeginning of an LCM run.
InTMS boolSee notes below.true
TMS InTMS
The volume is in a tape managementsystem defined to LCM.
LastUsedTMSDriveLUTDRIVE
char (alternate)4none
TMS LastUsedDrive
The unit address of the tape drive onwhich the tape was last used, printed as ahexadecimal character string.
LocationCodeLOCCODE
char8none
TMS LocationCode
The identifier assigned to a tape volumeby the tape management system toidentify the intended storage location forthat volume.
LocationDateLDATELOCDATE
dateSee notes below.none
TMS LocationDate
The date the volume was moved to thetape management system's tape storagelocation.
LocationNameLOCNAME
char (alternate)10none
LCM LocationName
The name of the tape storage location.Location Names are not defined to thetape management system, but are assignedby LCM from tape management systeminformation as specified by: Explorer: theLocation object Codes tab; Parameter File:the Location statement Code parameter.
LocationSequenceLOCSEQ
int5none
LCM LocationSequence
The number that LCM assigned to eachlocation to determine the order that tapesat that location are ejected. Controlled by:Explorer: the Locations folder Order tab;Parameter File: the order of Locationstatements in the parameter file.
Managed boolSee notes below.true
LCM Managed The volume is covered by a MANAGEstatement.
ManagedIndividuallyMANIND
boolSee notes below.true
LCM ManagedIndividually
The volume is managed individually, butis part of a multi-volume data set. Thishappens if all of the volumes in thevolume set are not assigned the sameManagement Method.
ManagementClassMGMTCLAS
char (alternate)8none
TMS ManagementClass
The name of the SMS Management Classfor the volume.
MaxUseCount int4none
HSC MaximumUseCount
The maximum usage for a cleaningcartridge set by the VOLATTR Maxcleanor MNTD Maxclean value.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 131
MediaSourceMEDIAS
char (alternate)6none
LCM MediaSource
The source of information used todetermine the volume's MediaType value.
DFLTThe media type defaulted to Standard.HSCCDSThe HSC Control Data Set.VOLDEFThe VOLATTR statements contained inthe file identified by the HSC VOLDEFparameter.VSMVTVVSM Virtual Tape Volume information.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
132 LCM Quick Reference • Revision 01 • E60155-01
MediaTypeMEDIAMEDIAT
char (alternate)8none
HSC,MVC,VTV
MediaTyp
The media type of the volume.
StandardStandard length 3480 cartridge.Long3490E extended capacity cartridge.DD3A10 Gb capacity helical cartridge.DD3B25 Gb capacity helical cartridge.DD3C50 Gb capacity helical cartridge.DD3DCleaning cartridge for helical drives.STK1R9840 data cartridge.STK1UCleaning cartridge for 9840 transports.STK1YCleaning cartridge for 9840D transports.STK2PT9940A data cartridge.STK2WCleaning cartridge for T9940 transports.T10000TTSmaller-capacity 1TB T10000C cartridge.T10000TST10000 "sport" cartridge.T10000T1Full-capacity 500GB T10000A or 1TBT10000B cartridge.T10000T2Full-capacity 5TB T10000C cartridge.T10000CCT10000C cleaning cartridge.T10000CLT10000A, T10000B, or T10000C cleaningcartridge.T10000CTT10000A or T10000B cleaning cartridge.ZCART9490EE ZCART media cartridge.LTO-100GLTO 100GB capacity cartridge.LTO-200GLTO 200GB capacity cartridge.LTO-35GLTO 35GB capacity cartridge.LTO-400GLTO 400GB capacity cartridge.LTO-400WLTO 400Gb capacity WORM cartridge.LTO-800GLTO 800GB capacity cartridgeLTO-800WLTO 800GB capacity WORM cartridgeLTO-1.5TLTO 1.5TB capacity cartridge.LTO-1.5WLTO Generation 5 WORM cartridge.LTO-2.5TLTO 2.5TB capacity cartridge.LTO-2.5WLTO Generation 5 WORM cartridge.LTO-CLN1LTO cleaning type 1 cartridge.LTO-CLN2LTO cleaning type 2 cartridge.LTO-CLNULTO universal cleaning cartridge.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 133
MediaTypeMEDIAMEDIAT
SDLTSDLT 160GB cartridge.SDLT-1SDLT Generation 1 cartridge.SDLT-4SDLT Generation 4 cartridge.SDLT-S2SDLT Generation S2 cartridge.SDLT-S3SDLT Generation S3 cartridge.SDLT-S4SDLT Generation S4 cartridge.SDLTCSDLT cleaning cartridge.VIRTUALVirtual Tape Volume (VTV) in theStorageTek Virtual Storage Managersystem.
MediaWarrantyLifeMWL
int 3 HSC Media Warranty Life Percentage of media warranty life used,expressed in percentage from 0% to 254%.
MethodColumnMTHCOL
int2none
LCM MethodColumn
The column in the LCM parameter file(generated when using the Explorer) inwhich the associated Management Methodwas coded. See also the MethodName andMethodLineNum fields.
MethodCondNumMTHCOND
int4none
LCM MethodCond Num
Explorer: The number of the Condition ofthe Method object that applies to thisvolume. A value of zero indicates that theOTHERWISE attributes for the Methodwere applied. Parameter File: Theoccurrence of the Cond parameter on theMethod statement that applies to thisvolume. A value of zero indicates that thedefault attributes for the Method wereapplied.
MethodEjectMTHEJ
char (alternate)8none
LCM MethodEject
The Eject attribute of the ManagementMethod assigned to this volume.
ASNEEDEDEject this volume only when room isneeded to meet free cell and/or volumemanagement criteria.NONever eject this volume.YESAlways eject this volume.
MethodLineNumMTHLINE
int5none
LCM MethodLine Num
The line in the LCM parameter file(generated when using the Explorer) inwhich the associated Management Methodwas coded. See also the MethodName andMethodColumn fields.
MethodLSMGroupMTHLSMGRP
char (alternate)10none
LCM MethodLSM Group
The LSM Group assigned to this volumeby its Management Method.
MethodNameMETHODMTHMTHNAME
char (alternate)10none
LCM MethodName
The name of the Management Methodassigned to this volume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
134 LCM Quick Reference • Revision 01 • E60155-01
MethodOrderMTHORD
int3none
LCM MethodOrder
The order in which the volume may bepicked for ejection or demotion. This isdetermined by: Explorer: the Pick Order ofthe applicable Condition on theConditions tab of the Method object;Parameter File: the Order(n) parameter ofthe Method statement.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 135
MethodReasonMTHRSN
char (alternate)10none
LCM MethodReason
The reason that the associatedManagement Method was chosen.CleanCleaning cartridge criteria.DatasetExplorer: A Data Set Identifier specifiedon the Methods folder Data Set tabapplied to this volume. Parameter File: ADataset statement applied to this volume.DefaultNo specified condition applied to thisvolume.EjBadThe tape management system indicatedthat this volume is defective and:Explorer: the Bad Scratch option on theAction tab of the Run object was checked;Parameter File: the Ejbad parameter on theOptions statement was specified.ExternalThe volume is marked as externallymanaged in the tape management system.HSCOnlyThe tape volume is not in a tapemanagement system.IgnoreExplorer: The TMS tab of the Subpoolobject specified that LCM should not takeactions such as sync, eject, and move forthis volume's Subpool. Parameter File: TheIgnore parameter on the Subpoolstatement applied to this volume.LocationExplorer: The Location tab of the Methodsfolder specified that the volume should beejected. Parameter File: A Locationstatement applied to this volume andspecified a Management Method with theEject attribute.LSMEjectExplorer: A Method object with theEject(Yes) attribute applied to this volume.Parameter File: An Eject(Yes) parameter ona Method statement applied to thisvolume.LSMNeverEjExplorer: A Method object with theEject(No) attribute applied to this volume.Parameter File: An Eject(No) parameter ona Method statement applied to thisvolume.MethodFileExplorer: The file specified for MethodInput on the File tab of the Run object hadan entry for this volume. Parameter File:The file specified on the Methodfileparameter of the Options statement hadan entry for this volume.ScratchScratch criteria.SetMethodExplorer: The Advanced tab of theMethods folder or a Custom Actionspecified on the Action tab of the Runobject applied to this volume. ParameterFile: A Set Method statement applied tothis volume.SubpoolExplorer: Not applicable. Parameter File:A Subpool statement applied to thisvolume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
136 LCM Quick Reference • Revision 01 • E60155-01
MethodUncondMTHUNCOND
boolSee notes below.true
LCM MethodUNCOND
Explorer: This volume is externallymanaged and the External tab of theMethods folder indicated that the Methodcould not be overridden, or the volume'sMethod was set using the Method InputFile and its entry included the U indicator.Parameter File: This volume's method wasassigned using the Uncond keyword.Uncond may be specified for the Externalor HSCOnly options, and by the Uindicator in the Methodfile.
MountDateMDATE
dateSee notes below.none
HSC MountDate
The date the volume was last mounted inan LSM.
Mounted boolSee notes below.true
HSC VolumeCurrentlyMounted
The volume is currently mounted.
MountTimeMTIME
timeSee notes below.none
HSC MountTime
The time of day the volume was lastmounted in an LSM.
MVC boolSee notes below.true
MVC MVC The volume is a Multiple VolumeCartridge for VSM.
MVCAudit boolSee notes below.true
MVC MVCAudit
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC is either being audited or theaudit failed. If the audit failed, VTCS willnot use the MVC for migration. To clearthis condition, rerun the AUDIT againstthis MVC.
MVCAvailableMVCAVAIL
int3none
MVC MVC%Available
The percentage of the MVC available foruse.
MVCBroken boolSee notes below.true
MVC MVCBroken
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC has an error that should beinvestigated. The error might not make theMVC unusable, but VTCS does not selectthe MVC for migration for 12 hours afterthis status has been set to true. After the12 hour period, the MVC is least preferredfor subsequent migrations, and recallsfrom the MVC can cause VTCS to drain it.This error condition can be accompaniedby messages SLS6686, SLS6687, SLS6688,SLS6690 and/or SLS6693. Any of thefollowing conditions can cause this MVCerror: MVC corrupted by another job(other than VTCS/VTSS). Attempt to use aread-only MVC for migration. A DDRswap failure. An RTD failure.
MVCConsolidateDate dateSee notes below.none
MVC MVCConsolidateDate
This field is valid only if LCM is runningwith NCS 6.2 or later.The date on which the MVC wasconsolidated as recorded by VSM.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 137
MVCConsolidateTime timeSee notes below.none
MVC MVCConsolidateTime
This field is valid only if LCM is runningwith NCS 6.2 or later.For a consolidation MVC, this fielddisplays the time of the consolidation.
MVCConsolidation boolSee notes below.true
MVC MVCConsolidation
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC is a consolidation MVC.
MVCDataCheck boolSee notes below.true
MVC MVCDataCheck
This field is valid only if LCM is runningwith NCS 6.2 or later.A data check was reported for this MVC.VSM will not use this MVC again formigration.
MVCDraining boolSee notes below.true
MVC MVCDrained
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC is being drained because of oneof: 1) an automatic drain or demandreclaim. 2) an explicit MVCDRaincommand, 3) The previous DRAIN requestfailed, in which case VTCS will not use theMVC for migration. To clear thiscondition, enter MVCDRain against MVCwithout the EJect option.
MVCEject boolSee notes below.true
MVC MVCEject
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC is in the process of eject eitherbecause you issued MVCDRainEJect or theMVC was ejected for update by aRACROUTE call. The MVC will not beused again for migration or recall. To clearthis condition, use MVCDRain againstMVC without the EJect option.
MVCExport boolSee notes below.true
MVC MVCExport
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC is an export MVC.
MVCFragmentedMVCFRAG
int3none
MVC MVC%Fragmented
The percentage of the MVC that is notavailable due to fragmentation.
MVCFull boolSee notes below.true
MVC MVCFull
This field is valid only if LCM is runningwith NCS 6.2 or later.Their is no space available on the MVC.
MVCInitialized boolSee notes below.true
MVC MVCInitialized
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC has been initialized.
MVCInUse int3none
MVC MVC%In Use
The percentage of the MVC used by validVirtual Tape Volumes.
MVCInvalidMIR boolSee notes below.true
MVC MVCInvalidMIR
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC has an invalid MIR.
MVCLastDrainReclaimDate date 10 VTCS MVC Drain/Reclaim Date the MVC was last drained orreclaimed.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
138 LCM Quick Reference • Revision 01 • E60155-01
MVCLastDrainReclaimTime time 8 VTCS MVC Drain/Reclaim Time the MVC was last drained orreclaimed.
MVCLost boolSee notes below.true
MVC MVCLost
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC was not mounted in response tothe last mount request. The MVC can stillbe used for migration, but will not selectthe MVC for migration for 12 hours after itis marked lost. After the 12 hour period,the MVC will be least preferred. Thiscondition will clear itself the next timethat the MVC is mounted.
MVCMaximumReached boolSee notes below.true
MVC MVCMaximumVTVs
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC has reached the maximum VTVsper MVC.
MVCMediaSize int9sum
MVC MVCMediaSize (MB)
This field is valid only if LCM is runningwith NCS 6.2 or later.The size in MB of the MVC. This isdetermined only after VTCS has used anMVC. "UNKNOWN" appears in this fielduntil VTCS migrates a VTV to the MVC.
MVCMountDate dateSee notes below.none
MVC MountMVCDate
This field is valid only if LCM is runningwith NCS 6.2 or later.The date on which the MVC wasmounted, as recorded by VTSS.
MVCMountTime timeSee notes below.none
MVC MVCMountTime
This field is valid only if LCM is runningwith NCS 6.2 or later.The time the MVC was last mounted, asrecorded by VTSS.
MVCPoolName char (alternate)13none
MVC MVCPoolName
This field is valid only if LCM is runningwith NCS 6.2 or later.MVC Pool Name from the VTCSMVCPOOL control statement.
MVCProtected bool VTCS MVC Protected MVC is in VTCS protected status.
MVCReadOnly boolSee notes below.true
MVC MVCReadOnly
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC has been marked read-only.
MVCRetired boolSee notes below.true
MVC MVCRetired
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC is retired. VTCS will recall from,but not migrate to, the MVC. Replace theMVC as soon as possible.
MVCStorageClassMVCSTORCLASSSTORAGECLASSSTORCLAS
char8none
MVC MVCStorageClass
This field is valid only if LCM is runningwith NCS 6.2 or later.The VTCS Storage Class for the volume.
MVCUsableForMigration boolSee notes below.true
MVC MVCUsableMigration
This field is valid only if LCM is runningwith NCS 6.2 or later.Indicates whether the MVC can be usedfor migration.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 139
MVCUsededMVCTimesMount
int9sum
MVC MVCUsed(MB)
The number of times the MVC has beenmounted.
MVCVLEName char 8 VTCS MVC VLE Name The Virtual Library Extension subsystemin which the MVC resides.
MVCVirtual bool VTCS MVC Virtual Indicates whether the MVCis virtual(exists as an image in a Virtual LibraryExtension subsystem).
MVCVTSS char8none
MVC MVC VTSSLastMounted
This field is valid only if LCM is runningwith NCS 6.2 or later.VTSS name where the MVC was last used.
MVCVTVCountMVCVTVCNT
int4sum
MVC_VTV MVCVTVCount
The number of valid Virtual Tape Volumeson the MVC.
MVCWarrantyExpired boolSee notes below.true
MVC MVCWarrantyExpired
This field is valid only if LCM is runningwith NCS 6.2 or later.The MVC’s warranty has expired. VTCScontinues to use the MVC. You shouldstart making plans to replace the MVCwhen it reaches Retired state.
NonScratchNONSCR
boolSee notes below.true
HSC,TMS
Non-Scratch
The volume is not classified as a scratchvolume.
NotuseableNOUSE
boolSee notes below.true
HSC NotUseable
The HSC has marked this volume as notuseable.
OnPullListONPL
boolSee notes below.true
LCM On PullList
The volume is on a Pull List.
OverMaxCleanOverHSCMAXCLN
boolSee notes below.true
HSC OverMAXCLN
The cleaning cartridge has exceeded itsmaximum usage count.
PermanentReadErrors int5sum
TMS PermanentRead Errors
The number of permanent read errors forthe volume.
PermanentWriteErrors int5sum
TMS PermanentWrite Errors
The number of permanent write errors forthe volume.
PlannedACSIDPACSID
char (alternate)2none
LCM PlannedACS ID
The ACS ID LCM has determined thevolume should be in at the end of theLCM run. This is planned only. Check theActionStatus field to determine if this isthe final ACS ID.
PlannedLSMGroupPLSMGRP
char (alternate)10none
LCM PlannedLSM Group
The LSM Group LCM has determined thevolume should be in at the end of theLCM run. This is planned only. Check theActionStatus field to determine if this isthe final LSM Group.
PlannedLSMIDPLSMID
char (alternate)5none
LCM PlannedLSM ID
The LSM ID LCM has determined thevolume should be in at the end of theLCM run. This is planned only. Check theActionStatus field to determine if this isthe final LSM ID.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
140 LCM Quick Reference • Revision 01 • E60155-01
PlannedLSMNamePLSMNAME
char (alternate)10none
LCM PlannedLSM Name
The LSM Name LCM has determined thevolume should be in at the end of theLCM run. This is planned only. Check theActionStatus field to determine if this isthe final LSM Name.
PullListNamePLNAME
char (alternate)10none
LCM Pull ListName
The name of the Pull List for the volume.
RecordingTechniqueRecTech
char8none
HSC RecordingTechnique
The recording technique associated with avolume's media This is the method used torecord data tracks on the tape surface forthe volume.
ReferenceDateRDATE
dateSee notes below.none
HSC,TMS
ReferenceDate
The date of last reference for the volume.This is the value used by LCM. The firstavailable field of the following determinesthe reference date: ReferenceTMSDate,ReferenceMVCDate, ReferenceVTVDate,MountDate, SelectDate. If all volumes of amulti-volume data set are covered by thesame Management Method, the mostrecent reference date for any volume willbe used by LCM for all volumes in themulti-volume data set.
ReferenceMVCDateRMDATE
dateSee notes below.none
MVC ReferenceMVCDate
The date on which the MVC was lastreferenced, as recorded by VSM.
ReferenceTMSDateRTDATE
dateSee notes below.none
TMS ReferenceTMSDate
The date of the last reference, as recordedin the associated tape managementsystem, for volumes being treated as a unit(Multi-volume support).
ReferenceVTVDateRVDATE
dateSee notes below.none
VTV ReferenceVTVDate
The date on which the VTV was lastreferenced, as recorded by VSM.
ReferenceVTVTimeRVTIME
timeSee notes below.none
VTV ReferenceVTVTime
The time of day the volume was lastreferenced, as recorded by VSM.
RunDate date 10 LCM Run Date Start date for LCM run.
RunName char (alternate)10none
LCM Run Name The name of the Run object from the JCLEXEC statement Run PARM.
RunTime time 8 LCM Run Time Start time for LCM run.
RunType char (alternate)10none
LCM Run Type The RunType from the JCL EXECstatement RunType PARM.
ScratchSCR
boolSee notes below.true
HSC,MVC,Open,TMS,VTV
Scratch The volume is classified as a scratchvolume by LCM.
ScratchedSCRED
boolSee notes below.true
LCM Scratched LCM marked the volume as scratch in theHSC or VSM.
SelectCountSCOUNT
int5none
HSC SelectCount
The number of times the volume has beenselected by the HSC.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 141
SelectDateSDATE
dateSee notes below.none
HSC SelectDate
The date the volume was last selected inan LSM.
Selected boolSee notes below.true
HSC VolumeCurrentlySelected
The volume is currently selected.
SelectTimeSTIME
timeSee notes below.none
HSC SelectTime
The time of day the volume was selectedby the HSC.
SerialSERVOLVOLSERVOLUME
char6none
HSC,MVC,TMS,VTV
VolumeSerial
The 6-character identifier of a tapevolume.
Serial1SER1
char6none
TMS FirstSerial
The 6-character identifier of the firstvolume of the volume set associated withthis volume.
SL8500Cell char24none
HSC SL8500 Cell The physical cell location of a volume thatresides in an SL8500 library. The value ofthis field is missing for volumes that donot reside in an SL8500.
Slot char8none
TMS Slot The value assigned to a tape volume bythe tape management system to pinpointthe storage place for the volume.
SubpoolSP
char (alternate)16none
LCM Subpool The name of the Subpool managing agroup of volume serial numbers. This isdefined in the LCM Subpool object(Explorer) or Subpool statement(Parameter File).
SubpoolIdSPID
char (alternate)13none
HSC SubpoolID
Volume subpool ID from the HSC. Thiswill be the 13-character name of the pool ifusing HSC SCRPOOL statements, or the 3-digit subpool index number if usingSLSUX03.
SubpoolLabelTypeSPLBLTYP
char (alternate)3none
HSC SubpoolLabel Type
Volume subpool label type from the HSC.
TapeGroupTG
char (alternate)25none
LCM Tape Group The name of the tape group of a volume.Explorer: This is defined on the Media tabof the Subpool object. Parameter File: Thisis defined in the Media parameter of theSubpool statement.
TemporaryReadErrors int5sum
TMS TemporaryRead Errors
The number of temporary read errors forthe volume.
TemporaryWriteErrors int5sum
TMS TemporaryWrite Errors
The number of temporary write errors forthe volume.
TM#Dsnbs int3none
CA1 CA1NumberDSN Blocks
CA-1-specific number of data set nameblocks.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
142 LCM Quick Reference • Revision 01 • E60155-01
TM128trk boolSee notes below.true
CA1 CA1TrtchTm128trk
CA-1-specific recording technique. x'E8'indicates Trk 3590 cartridge tape.
TM18trk boolSee notes below.true
CA1 CA1TrtchTm18trk
CA-1-specific recording technique. x'C0'indicates 3480 cartridge tape - 18 tracks.
TM3590 boolSee notes below.true
CA1 CA1DenTM3590
CA-1-specific recording density. x'E8'indicates 3590 cartridge tape.
TM36Trk boolSee notes below.true
CA1 CA1TrtchTm36trk
CA-1-specific recording technique. x'E0'indicates 3490 cartridge tape - 36 tracks.
TM36trk2 boolSee notes below.true
CA1 CA1TrtchTm36trk2
CA-1-specific recording technique. x'E1'indicates 3490E cartridge tape - 36 tracks(extended length).
TM38000 boolSee notes below.true
CA1 CA1DenTM38000
CA-1-specific recording density. x'E3'indicates 38K bpi (cartridge).
TM38KC boolSee notes below.true
CA1 CA1DenTM38KC
CA-1-specific recording density. x'E7'indicates 38K bpi (cartridge-compacted).
TM9trk boolSee notes below.true
CA1 CA1TrtchTm9trk
CA-1-specific recording technique. x'80'indicates nine track tape.
TMAbend boolSee notes below.true
CA1 CA1Flag1TmAbend
CA-1-specific internal flag bit x'10'.Volume closed by abend.
TMActvl1 char5none
CA1 CA1Actvl1
CA-1-specific actual internal volser
TMActvl2 char1none
CA1 CA1Actvl2
CA-1-specific actual internal volser
TMAcvoli boolSee notes below.true
CA1 CA1Flag4TmAcvoli
CA-1-specific internal flag4 bit x'40'.Actual volser in use.
TMAdsnb int8none
CA1 CA1AddressFirst DSNB
CA-1-specific address (relative to BASE inTMSCTL#2) of first DSNB recordassociated with this volume record.
TMAldsnb int8none
CA1 CA1AddressLast DSNB
CA-1-specific address (relative to BASE inTMSCTL#2) of last DSNB recordassociated with this volume record.
TMB1Dis int9none
CA1 CA1B1Dis
CA-1-specific B1 security disclosure label.
TMB1Int int9none
CA1 CA1B1Int
CA-1-specific B1 security integrity label.
TMBadtap boolSee notes below.true
CA1 CA1Flag3TmBadtap
CA-1-specific internal flag3 bit x'80'. CA-9/R+ indicated bad tape, do not mount forscratch.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 143
TMBlkcnt int10none
CA1 CA1BlockCount
CA-1-specific data set block count.
TMBlksi int5none
CA1 CA1BlockSize
CA-1-specific maximum block size.
TMBthdt dateSee notes below.none
CA1 CA1BirthDate
CA-1-specific date tape was first used.
TMCatlog boolSee notes below.true
CA1 CA1Flag2TmCatlog
CA-1-specific internal flag2 bit x'80'. Dataset was on MVS catalog.
TMClean boolSee notes below.true
CA1 CA1Flag1TmClean
CA-1-specific internal flag bit x'08'.Volume listed to be cleaned.
TMClncnt int3none
CA1 CA1CleanCount
CA-1-specific number of times tapecleaned.
TMClosed boolSee notes below.true
CA1 CA1Flag1TmClosed
CA-1-specific internal flag bit x'40'.Volume closed normally.
TMCpgm char8none
CA1 CA1CreatePGM
CA-1-specific creating program name.
TMCrtdt dateSee notes below.none
CA1 CA1CreateDate
CA-1-specific creation date.
TMCrtti timeSee notes below.none
CA1 CA1CreateTime
CA-1-specific creation time.
TMCruni char (alternate)4none
CA1 CA1CreateUnit
CA-1-specific address of creation unit.
TMDatcln dateSee notes below.none
CA1 CA1Last CleanDate
CA-1-specific date tape was last cleaned.
TMDdname char8none
CA1 CA1CreateDdname
CA-1-specific creating ddname.
TMDegau boolSee notes below.true
CA1 CA1Flag4Degaussed
CA-1-specific internal flag4 bit x'10'. Tapehas been degaussed.
TMDelet boolSee notes below.true
CA1 CA1Flag1Deleted
CA-1-specific internal flag bit x'02'.Volume in delete (inactive) status
TMDen char (alternate)2none
CA1 CA1RecordingDensity
CA-1-specific recording density.
TMDfault boolSee notes below.true
CA1 CA1Flag1Tmdfault
CA-1-specific internal flag bit x'01'.Volume eligible for RDS override.
TMDfexu boolSee notes below.true
CA1 CA1Flag3TmDfexu
CA-1-specific internal flag3 bit x'04'.Default expiration date used at openoutput.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
144 LCM Quick Reference • Revision 01 • E60155-01
TMDsn char44none
CA1 CA1Data SetName
CA-1-specific data set name.
TMDsn17 char17none
CA1 CA1DSN17
CA-1-specific last 17 bytes of dsn.
TMDynam boolSee notes below.true
CA1 CA1Flag3TmDynam
CA-1-specific internal flag3 bit x'10'.Controlled by CA-DYNAM/T.
TMEcatlg boolSee notes below.true
CA1 CA1Flag2TmEcatlg
CA-1-specific internal flag2 bit x'08'.Expired from catalog control (TMSCTLG).
TMEcycle boolSee notes below.true
CA1 CA1Flag2TmEcycle
CA-1-specific internal flag2 bit x'04'.Expired from cycle control (TMSCYCLE).
TMEdmid char4none
CA1 CA1EDMID
CA-1-specific external data manager id.
TMEdmtap boolSee notes below.true
CA1 CA1Flag3TmEdmtap
CA-1-specific internal flag3 bit x'20'.Controlled by external data manager.
TMEldate boolSee notes below.true
CA1 CA1Flag2TmEldate
CA-1-specific internal flag bit x'02'.Expired from LDATE control(TMSCLEAN).
TMErase boolSee notes below.true
CA1 CA1Flag3TmErase
CA-1-specific internal flag3 bit x'08'. Dataset erase required.
TMEsms boolSee notes below.true
CA1 CA1Flag4TmEsms
CA-1-specific internal flag4 bit x'80'. Tapeexpired by SMS max retention rules.
TMEtms boolSee notes below.true
CA1 CA1Flag2TmEtms
CA-1-specific internal flag bit x'01'.Expired by TMS.
TMExpdt dateSee notes below.none
CA1 CA1ExpireDate
CA-1-specific expiration date.
TMFilcpy boolSee notes below.true
CA1 CA1Flag3TmFilcpy
CA-1-specific internal flag3 bit x'01'.Created by CA-1/Copycat.
TMFlag1 char (alternate)2none
CA1 CA1Flag1
CA-1-specific internal flag byte.
TMFlag2 char (alternate)2none
CA1 CA1Flag2
CA-1-specific internal flag byte.
TMFlag3 char (alternate)2none
CA1 CA1Flag3
CA-1-specific internal flag byte.
TMFlag4 char (alternate)2none
CA1 CA1Flag4
CA-1-specific internal flag byte.
TMFlag5 char (alternate)2none
CA1 CA1Flag5
CA-1-specific internal flag byte.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 145
TMFlag6 char (alternate)2none
CA1 CA1Flag6
CA-1-specific internal flag byte.
TMFrsvol char6none
CA1 CA1FirstSerial
CA-1-specific first volser of data set.
TMIntal boolSee notes below.true
CA1 CA1Flag1TmIntal
CA-1-specific internal flag1 bit x'80'.Internal field changed by user.
TMInuse boolSee notes below.true
CA1 CA1Flag4TmInuse
CA-1-specific internal flag4 bit x'02'. Tapeis in use for RTS (Real Time Stacking).
TMIscat boolSee notes below.true
CA1 CA1Flag4TmIscat
CA-1-specific internal flag4 bit x'08'. Fileon OS catalog.
TMJobnm char8none
CA1 CA1CreatingJob Name
CA-1-specific creating job name.
TMLasusd dateSee notes below.none
CA1 CA1LastUsed
CA-1-specific date last used.
TMLasusj char8none
CA1 CA1LastJob
CA-1-specific job name which last usedvolume.
TMLasust timeSee notes below.none
CA1 CA1LastTime
CA-1-specific time last used.
TMLpgm char8none
CA1 CA1LastPGM
CA-1-specific last used program name.
TMLrecl int5none
CA1 CA1LRECL
CA-1-specific logical record length.
TMLtype char3none
CA1 CA1Label
CA-1-specific tape label type. One of SL,SUL, NL, NSL, BLP, AL1, AU1, AL3, AU3.
TMNostak boolSee notes below.true
CA1 CA1Flag4TmNostak
CA-1-specific internal flag4 bit x'01'. Nofurther stacking allowed.
TMNrs boolSee notes below.true
CA1 CA1Flag4TmNrs
CA-1-specific internal flag4 bit x'04'. Non-resident tape.
TMNxtVol char6none
CA1 CA1NextSerial
CA-1-specific next volser of data set.
TMOutar char4none
CA1 CA1Outcode
CA-1-specific location id of out-of-areatape.
TMOutdat dateSee notes below.none
CA1 CA1Outdate
CA-1-specific date tape was marked out-of-area.
TMOutput boolSee notes below.true
CA1 CA1Flag2TmOutput
CA-1-specific internal flag2 bit x'40'.Volume opened for output.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
146 LCM Quick Reference • Revision 01 • E60155-01
TMPrerrc int5none
CA1 CA1Perm ReadSince Clean
CA-1-specific number of permanent readerrors since cleaned.
TMPrerri int5none
CA1 CA1Perm ReadSince Init
CA-1-specific number of permanent readerrors since initialized.
TMPrvvol char6none
CA1 CA1PreviousSerial
CA-1-specific previous volser of data set.
TMPwerrc int5none
CA1 CA1Perm WriteSince Clean
CA-1-specific number of permanent writeerrors since cleaned.
TMPwerri int5none
CA1 CA1Perm WriteSince Init
CA-1-specific number of permanent writeerrors since initialized.
TMRecfm char3none
CA1 CA1RECFM
CA-1-specific record format. One of V, VA,VS, VB, VBM, VBA, VBS, F, FM, FA, FS,FB, FBM, FBA, FBS, U.
TMRedwd1 boolSee notes below.true
CA1 CA1TrtchTmRedwd1
CA-1-specific recording technique. x'E4'indicates Redwood 12.5G capacity.
TMRedwd2 boolSee notes below.true
CA1 CA1TrtchTmRedwd2
CA-1-specific recording technique. x'E5'indicates Redwood 25G capacity.
TMRedwd3 boolSee notes below.true
CA1 CA1TrtchTmRedwd3
CA-1-specific recording technique. x'E6'indicates Redwood 50G capacity.
TMRelevm boolSee notes below.true
CA1 CA1Flag3TmRelevm
CA-1-specific internal flag3 bit x'40'. Tapereleased by external vault manager.
TMReuse boolSee notes below.true
CA1 CA1Flag2TmReuse
CA-1-specific internal flag2 bit x'20'. Dataset recreated.
TMRobid int2none
CA1 CA1Robid
CA-1-specific robotic device indicator.
TMRobty int2none
CA1 CA1Robty
CA-1-specific tape in robotic device.
TMSBad boolSee notes below.true
Open,TMS
TMS Bad The volume has been marked defective inthe tape management system.
TMScrtch boolSee notes below.true
CA1 CA1Flag1Scratch
CA-1-specific internal flag bit x'04'.Volume in scratch status.
TMSExpired boolSee notes below.true
Open,TMS
TMS Expired The volume is marked expired in the tapemanagement system.
TMSlot char8none
CA1 CA1Slot
CA-1-specific vault slot number.
TMSmsmc char8none
CA1 CA1SMS MgtClass
CA-1-specific SMS management class.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 147
TMSName char (alternate)10none
LCM TMSName
The name of the tape management systemdefined on the TMS statement.
TMSReel boolSee notes below.true
Open,TMS
TMS Reel The volume is marked as a 9-track reeltape in the tape management system.
TMSScratchTMSSCR
boolSee notes below.true
TMS TMSScratch
The tape management system has thescratch flag set for this volume.
TMStack boolSee notes below.true
CA1 CA1Flag5TmStack
CA-1-specific internal flag5 bit x'80'. Tapehas been used by RTS.
TMStpnam char8none
CA1 CA1CreatingStep
CA-1-specific creating step name.
TMSUse int5none
Open,TMS
TMS UseCount
The number of times the volume has beenused.
TMTempds boolSee notes below.true
CA1 CA1Flag2Temp DS
CA-1-specific internal flag2 bit x'10'.Temporary data set.
TMTrerrc int5none
CA1 CA1Temp ReadSince Clean
CA-1-specific number of temporary readerrors since cleaned.
TMTrerri int5none
CA1 CA1Temp ReadSince Init
CA-1-specific number of temporary readerrors since initialized.
TMTrtch char (alternate)2none
CA1 CA1TRTCH
CA-1-specific recording technique.
TMTwerrc int5none
CA1 CA1Temp WriteSince Clean
CA-1-specific number of temporary writeerrors since cleaned.
TMTwerri int5none
CA1 CA1Temp WriteSince Init
CA-1-specific number of temporary writeerrors since initialized.
TMUcount int5none
CA1 CA1Uses SinceBirth
CA-1-specific number of times tapeopened since birthdate.
TMUltif boolSee notes below.true
CA1 CA1Flag3TmUltif
CA-1-specific internal flag3 bit x'02'.Additional files exist in volume set.
TMUpdate boolSee notes below.true
CA1 CA1Flag1TmUpdate
CA-1-specific internal flag bit x'20'.Volume record updated by user.
TMUsecln int2none
CA1 CA1Uses SinceClean
CA-1-specific use count at last cleaning.
TMUserTMAcct
char50none
CA1 CA1Acct
CA-1-specific user job accounting area.
TMUsuni char (alternate)4none
CA1 CA1LastUnit
CA-1-specific address of unit last used.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
148 LCM Quick Reference • Revision 01 • E60155-01
TMVabtch int2none
CA1 CA1Batchid
CA-1-specific id of last CA-1 program toupdate record.
TMVacode int2none
CA1 CA1Aucode
CA-1-specific audit code.
TMVacpu char4none
CA1 CA1CPU ID
CA-1-specific id of CPU used for lastupdate.
TMVadate dateSee notes below.none
CA1 CA1Last UpdateDate
CA-1-specific date of last update.
TMVaflg1 int3none
CA1 CA1Auflag1
CA-1-specific audit flag.
TMVahook int3none
CA1 CA1Hookid
CA-1-specific id of last intercept to updaterecord.
TMVatime timeSee notes below.none
CA1 CA1Last UpdateTime
CA-1-specific time of last update.
TMVauser char8none
CA1 CA1Userid
CA-1-specific id of last user to updaterecord.
TMVendor char8none
CA1 CA1Vendor
CA-1-specific tape vendor name.
TMVolseq int3none
CA1 CA1SeqNum
CA-1-specific volume sequence number.
TMVolser char6none
CA1 CA1VolumeSerial
CA-1-specific volume serial number.
TMVsr boolSee notes below.true
CA1 CA1Flag4TmVsr
CA-1-specific internal flag4 bit x'20'. Vaultspecific request.
UnscratchedUNSCRED
boolSee notes below.true
LCM Unscratched LCM marked the volume as not scratch inthe HSC or VSM.
UserBool1 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 1
User-defined Boolean field for a volume.
UserBool10 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 10
User-defined Boolean field for a volume.
UserBool2 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 2
User-defined Boolean field for a volume.
UserBool3 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 3
User-defined Boolean field for a volume.
UserBool4 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 4
User-defined Boolean field for a volume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 149
UserBool5 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 5
User-defined Boolean field for a volume.
UserBool6 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 6
User-defined Boolean field for a volume.
UserBool7 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 7
User-defined Boolean field for a volume.
UserBool8 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 8
User-defined Boolean field for a volume.
UserBool9 boolSee notes below.true
Custom,Open
User-DefinedBooleanField 9
User-defined Boolean field for a volume.
UserChar1 char20none
Custom,Open
User-DefinedCharacterField 1
User-defined character field for a volume.
UserChar10 char20none
Custom,Open
User-DefinedCharacterField 10
User-defined character field for a volume.
UserChar2 char20none
Custom,Open
User-DefinedCharacterField 2
User-defined character field for a volume.
UserChar3 char20none
Custom,Open
User-DefinedCharacterField 3
User-defined character field for a volume.
UserChar4 char20none
Custom,Open
User-DefinedCharacterField 4
User-defined character field for a volume.
UserChar5 char20none
Custom,Open
User-DefinedCharacterField 5
User-defined character field for a volume.
UserChar6 char20none
Custom,Open
User-DefinedCharacterField 6
User-defined character field for a volume.
UserChar7 char20none
Custom,Open
User-DefinedCharacterField 7
User-defined character field for a volume.
UserChar8 char20none
Custom,Open
User-DefinedCharacterField 8
User-defined character field for a volume.
UserChar9 char20none
Custom,Open
User-DefinedCharacterField 9
User-defined character field for a volume.
UserDate1 dateSee notes below.none
Custom,Open
User-DefinedDateField 1
User-defined date field for a volume.
UserDate10 dateSee notes below.none
Custom,Open
User-DefinedDateField 10
User-defined date field for a volume.
UserDate2 dateSee notes below.none
Custom,Open
User-DefinedDateField 2
User-defined date field for a volume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
150 LCM Quick Reference • Revision 01 • E60155-01
UserDate3 dateSee notes below.none
Custom,Open
User-DefinedDateField 3
User-defined date field for a volume.
UserDate4 dateSee notes below.none
Custom,Open
User-DefinedDateField 4
User-defined date field for a volume.
UserDate5 dateSee notes below.none
Custom,Open
User-DefinedDateField 5
User-defined date field for a volume.
UserDate6 dateSee notes below.none
Custom,Open
User-DefinedDateField 6
User-defined date field for a volume.
UserDate7 dateSee notes below.none
Custom,Open
User-DefinedDateField 7
User-defined date field for a volume.
UserDate8 dateSee notes below.none
Custom,Open
User-DefinedDateField 8
User-defined date field for a volume.
UserDate9 dateSee notes below.none
Custom,Open
User-DefinedDateField 9
User-defined date field for a volume.
UserInt1 int7none
Custom,Open
User-DefinedIntegerField 1
User-defined integer field for a volume.
UserInt10 int7none
Custom,Open
User-DefinedIntegerField 10
User-defined integer field for a volume.
UserInt2 int7none
Custom,Open
User-DefinedIntegerField 2
User-defined integer field for a volume.
UserInt3 int7none
Custom,Open
User-DefinedIntegerField 3
User-defined integer field for a volume.
UserInt4 int7none
Custom,Open
User-DefinedIntegerField 4
User-defined integer field for a volume.
UserInt5 int7none
Custom,Open
User-DefinedIntegerField 5
User-defined integer field for a volume.
UserInt6 int7none
Custom,Open
User-DefinedIntegerField 6
User-defined integer field for a volume.
UserInt7 int7none
Custom,Open
User-DefinedIntegerField 7
User-defined integer field for a volume.
UserInt8 int7none
Custom,Open
User-DefinedIntegerField 8
User-defined integer field for a volume.
UserInt9 int7none
Custom,Open
User-DefinedIntegerField 9
User-defined integer field for a volume.
UserTime1 timeSee notes below.none
Custom,Open
User-DefinedTimeField 1
User-defined time field for a volume.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 151
UserTime10 timeSee notes below.none
Custom,Open
User-DefinedTimeField 10
User-defined time field for a volume.
UserTime2 timeSee notes below.none
Custom,Open
User-DefinedTimeField 2
User-defined time field for a volume.
UserTime3 timeSee notes below.none
Custom,Open
User-DefinedTimeField 3
User-defined time field for a volume.
UserTime4 timeSee notes below.none
Custom,Open
User-DefinedTimeField 4
User-defined time field for a volume.
UserTime5 timeSee notes below.none
Custom,Open
User-DefinedTimeField 5
User-defined time field for a volume.
UserTime6 timeSee notes below.none
Custom,Open
User-DefinedTimeField 6
User-defined time field for a volume.
UserTime7 timeSee notes below.none
Custom,Open
User-DefinedTimeField 7
User-defined time field for a volume.
UserTime8 timeSee notes below.none
Custom,Open
User-DefinedTimeField 8
User-defined time field for a volume.
UserTime9 timeSee notes below.none
Custom,Open
User-DefinedTimeField 9
User-defined time field for a volume.
VaultAssignmentDate dateSee notes below.none
HSC VaultAssignmentDate
The Date the volume was first assigned tothe External Vault.
VaultAssignmentTime timeSee notes below.none
HSC VaultAssignmentTime
Time the volume was first assigned to theExternal Vault.
VaultName char8none
HSC VaultName
The name of the vault.
VaultReturnDate dateSee notes below.none
HSC VaultReturnDate
The Date the volume can be returned tothe External Vault.
VaultReturnTime timeSee notes below.none
HSC VaultReturnTime
Time the volume can be returned to theExternal Vault.
VaultSlot char10none
HSC VaultSlot
The assigned External Vault Slot value.
VolumeSequenceNumberVOLSEQ
int3none
TMS SeqNum
The volume sequence number of thevolume.
VTV boolSee notes below.true
VTV VTV The volume is a Virtual Tape Volume(VTV), as reported by VSM.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
152 LCM Quick Reference • Revision 01 • E60155-01
VTVCompressionPercentage int2avg
VTV VTVCompressionPercentage
This field is valid only if LCM is runningwith NCS 6.2 or later.This is the difference between theuncompressed and compressed VTV sizeexpressed as a percentage of theuncompressed VTV size. For example, if a100MB VTV compresses to 40MB, then thecompression percentage will be given as60%. A compression of 0% indicates thatno compression was possible on the VTV.
VTVConsolidated boolSee notes below.true
VTV VTVConsolidated
This field is valid only if LCM is runningwith NCS 6.2 or later.Indicates whether a VTV is currentlyconsolidated.
VTVCopyTapePlex1 char8none
VTV VTVCopyTapePlex 1
The first copy TapePlex for this VTV.
VTVCopyTapePlex2 char8none
VTV VTVCopyTapePlex 2
The second copy TapePlex for this VTV.
VTVDuplexed boolSee notes below.true
VTV VTVDuplexed
The VTV has at least 2 copies.
VTVEExportRejected1 bool VTCS VTV EExportRejected1
Indicates whether the EExport toTapePlex1 was rejected.
VTVEExportRejected2 bool VTCS VTV EExportRejected2
Indicates whether the EExport toTapePlex2 was rejected.
VTVEExportStatus char 12 VTCS VTV EExport Status EExport Status of VTV
VTVEExportTapePlex1 char 8 VTCS VTV EExportTapePlex1
The first EExport TapePlex for this VTV.
VTVEExportTapePlex12 char 8 VTCS VTV EExportTapePlex2
The second EExport TapePlex for this VTV.
VTVFenced boolSee notes below.true
VTV VTVFenced
This field is valid only if LCM is runningwith NCS 6.2 or later.The VTV's state is unknown to VTSS.
VTVInitialized boolSee notes below.true
VTV VTVInitialized
This field is valid only if LCM is runningwith NCS 6.2 or later.The VTV has been initialized by VTSS.
VTVInvalidVTVDELVTVDELETEDVTVINV
boolSee notes below.true
VTV VTVInvalid
The VTV is invalid in VSM.
VTVManagementClassVTVMGMTCLASVTVMGTCLASS
char8none
VTV VTVManagementClass
The VSM management class for the VTV.
VTVMaximumSize int5none
VTV VTVMaximumSize (MB)
This field is valid only if LCM is runningwith NCS 6.2 or later.The maximum size of the VTV is 32GB.
VTVMigratedVTVMIG
boolSee notes below.true
VTV VTVMigrated
The VTV is migrated in VSM.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 153
VTVMountedVTVMNTD
boolSee notes below.true
VTV VTVMounted
The VTV is mounted according to VSM.
VTVMVCID1 char6none
VTV VTVMVC1
The MVC volser on which the VTVresides.
VTVMVCID2 char6none
VTV VTVMVC2
The MVC volser on which a duplicate orconsolidation copy of the VTV resides.Note: If the VTV is consolidated during anLCM run, the value of this field will beupdated after the consolidation isperformed. The POSTACTION value willreflect the consolidation MVC for thisVTV.
VTVMVCID3 char6none
VTV VTVMVC3
The MVC volser on which a duplicate orconsolidation copy of the VTV resides.
VTVMVCID4 char6none
VTV VTVMVC4
The MVC volser on which a duplicate orconsolidation copy of the VTV resides.
VTVNewCreate boolSee notes below.true
VTV VTVNewlyCreated
This field is valid only if LCM is runningwith NCS 6.2 or later.Indicates whether the VTV was newlycreated when it was last resident.
VTVOwningTapePlex char8none
VTV VTVOwningTapePlex
The owning TapePlex for this VTV.
VTVPageSize char8none
VTV VTVPageSize
The VTV Page Size
Large
Standard
VTVRecallDate dateSee notes below.none
VTV VTVRecallDate
This field is valid only if LCM is runningwith NCS 6.2 or later.Date VTV was recalled to the VTSS buffer.
VTVRecallTime timeSee notes below.none
VTV VTVRecallTime
This field is valid only if LCM is runningwith NCS 6.2 or later.Time VTV was recalled to the VTSS buffer.
VTVReplicationStatus char 20 VTCS VTV ReplicationStatus
Status of VTV replication.
VTVReplicaVTSS char 8 VTCS VTV Replica VTSS VTSS used for replication.
VTVResident boolSee notes below.true
VTV VTVResident
This field is valid only if LCM is runningwith NCS 6.2 or later.Indicates whether a VTV is resident in aVTSS.
VTVResidentDate date 10 VTCS VTV Resident Date Date VTV was last resident in the VTSSbuffer. This may be the number of dayssince the VTV was created or the last timeit was recalled to the buffer
VTVScratchVTVSCR
boolSee notes below.true
VTV VTVScratch
The VTV is scratch, as recorded by VSM.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
154 LCM Quick Reference • Revision 01 • E60155-01
VTVSizeCompressed int4sum
VTV VTVSizeCompressed (MB)
This field is valid only if LCM is runningwith NCS 6.2 or later.The actual compressed size of the VTV inmegabytes.
VTVSizeUncompressedVTVMediaSize
int4sum
VTV VTVSizeUncompressed (MB)
This field is valid only if LCM is runningwith NCS 6.2 or later.The actual uncompressed size of the VTVin megabytes.
VTVTimesRead int7none
VTV VTVTimesRead
This field is valid only if LCM is runningwith NCS 6.2 or later.The number of times the VTV has beenread.
VTVUnavailableVTVUNAVAIL
boolSee notes below.true
VTV VTVUnavailable
This field is valid only if LCM is runningwith NCS 6.2 or later.The VTV is unavailable because it is eithermounted, resident, or fenced according toVSM.
VTVVTSS char8none
VTV VTVVTSS
The Virtual Tape SubSystem (VTSS) inwhich the VTV resides.
WrongScratchStatusWRNGSCRST
boolSee notes below.true
LCM WrongScratchStatus
The scratch status indicator in the HSCCDS is incorrect. For volumes covered byHSCUNSCR (Explorer: "Set HSC-scratchindicators to OFF" on the Scratch tab ofthe Run object), the WrongScratchStatusflag indicates that the HSC UNSCRATCHrequest failed. For volumes not covered byHSCUNSCR, the WrongScratchStatus flagindicates that the scratch status recordedin the HSC CDS or in VSM does not agreewith the scratch status in the TMS. Thismay occur for volumes when the Sync orSyncVTV option (Explorer: Sync tab ofRun object) is not in effect or when theassociated synchronization request fails.The LCM log file contains a message foreach request failure. LCM does not set theWrongScratchStatus flag for volumes thatare scratch in the TMS but are not scratchin the HSC or in VSM if they are in use atthe time LCM attempts the unscratchoperation. This is a normal situation thatcan occur between the time a tape isallocated and the time it is put back in acell.
TABLE 3-5 REPORT VOLUME Statement Fields
Field
TypeSizeSummary Source Report Heading Description
E60155-01 • Revision 01 Chapter 3 155
General Fields
156 LCM Quick Reference • Revision 01 • E60155-01
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
ACSID char (alternate)2none
Custom LSM Report ACSID
The 2-digit hexadecimal numberassigned to the Automated CartridgeSystem.
ActionACT
char (alternate)12none
Custom MVC_VTVReportCustom VolumeReport
Action The action planned to be taken on thevolume.
ConsolidatePlanned to consolidate the virtualtape volume.EjectPlanned to eject the volume.EnterPlanned to enter the volume.ExportPlanned to export the virtual tapevolume.KeepPlanned to keep the volume in theinitial LSM.MigratePlanned to migrate the virtual tapevolume.MovePlanned to move the volume.NoneNo action planned.RecallPlanned to recall the virtual tapevolume.ReclaimPlanned to reclaim space on theMVC.ScratchPlanned to set the scratch status forthe volume in the HSC CDS or VTCSto Scratch.UnscratchPlanned to set the scratch status forthe volume in the HSC CDS or VTCSto Not Scratch.
E60155-01 • Revision 01 Chapter 3 157
ActionReasonACTRSN
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
ActionReason
The reason the action was chosen.
ActionExplorer: Instructed by Action tab ofRun object. Parameter File: Instructedby Action statement.ClrFzPnlExplorer: The Action tab of the Runobject caused this action to ejectvolumes frozen by the HSC.Parameter File: A ClearFrozenPanelsparameter caused this action to ejectvolumes frozen by the HSC.EjBadExplorer: The Action tab of the Runobject caused this action to ejectdefective volumes. Parameter File:An EjBad parameter caused thisaction to eject defective volumes.MethodExplorer: A Method object conditioncaused LCM to perform this action.Parameter File: A Method statementattribute caused LCM to perform thisaction.NeedLCM planned this action in order tomeet criteria.PullListExplorer: A PullList object causedthis action. Parameter File: A PullListstatement caused this action.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
158 LCM Quick Reference • Revision 01 • E60155-01
ActionStatusACTSTAT
char (alternate)40none
Custom MVC_VTVReportCustom VolumeReport
ActionStatus
The final status of an action. Thisfield is only meaningful on aPOSTACTION report.
Action performed successfully
Action was not necessary
LCM stop command was entered
No magazines in CAP
No room was available
not processed by VTCS
Reason is not known (see LCMLOG)
Reply to delay WTOR was ABORT orFAIL
Volume is in disconnected ACS
Volume is in manual mode LSM
Volume is in use by another host
Volume was errant when actionattempted
Volume was mounted when actionattempted
Volume was recently used or selected
VTCS error (see LCMLOG)
VTCS PGMI (SWSPGMI) notavailable
VTCS request failed
VTCS task ended unexpectedly
AdditionalEntersADDNLEN
int7sum
Custom LSM Report AdditionalEnters
The number of scratch volumes thatneed to be entered in addition to thenumber LCM has picked by volser.
BaseName char44none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Base Name The controlling data set name of thevolume. If the data set is a member ofa Generation Data Group, only thebase name (no .GnnnnVnn) isincluded.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 159
ClassificationCLS
char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Classification Classification of the volume.
BadScratchVolumes marked defective andscratch in TMSCleanVolumes with the HSC cleaningprefixExpiredVolumes marked not scratch andexpired in TMSNonScratchVolumes not scratch, badscratch,expired, or cleanScratchVolumes available for receiving newtape data sets
CleanCLN
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
CleaningCartridge
This volume is a cleaning cartridge.
CleanEntersCLNENTERS
int7sum
Custom LSM Report CleanEnters
The total number of cleaningcartridges that need to be enteredinto the LSM.
ConsolidationGroupNameCONSGRPNAME
char8none
Custom MVC_VTVReportCustom VolumeReport
ConsolidationGroup Name
The consolidation group name for theVTV.
Copy int4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Copy Copy number of the volume. A valueof 1 refers to the most recentlycreated copy of the data set accordingto the tape management system, 2refers to the next most recentlycreated copy, and so on.
CreatingTMSDriveCTDRIVE
char (alternate)4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreatingDrive
The unit address of the tape drive onwhich the tape data set was created,printed as a hexadecimal characterstring.
CreationDateCDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationDate
The date the volume was created.The first available field of thefollowing determines the creationdate: CreationTMSDate,CreationVTVDate,CreationMVCDate.
CreationJobNameCJOBNAMEJOBNAME
char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationJob Name
The JCL job name that created thevolume.
CreationMVCDateCMDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationMVCDate
The date the volume was created asrecorded by VSM.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
160 LCM Quick Reference • Revision 01 • E60155-01
CreationMVCTimeCMTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationMVCTime
The time of day the volume wascreated as recorded by VSM.
CreationStepNameCSTEPNAMESTEPNAME
char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationStep Name
The JCL step name that created thevolume.
CreationTimeCTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationTime
The time of day the volume wascreated. The first available field of thefollowing determines the creationtime: CreationTMSTime,CreationVTVTime,CreationMVCTime.
CreationTMSDateCTDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationTMSDate
The date the volume was created asrecorded in the associated tapemanagement system.
CreationTMSTimeCTTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationTMSTime
The time of day the volume wascreated as recorded in the associatedtape management system.
CreationVTVDateCVDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationVTVDate
The date the volume was created asrecorded by VSM.
CreationVTVTimeCVTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CreationVTVTime
The time of day the volume wascreated as recorded by VSM.
CycleDateCYDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CycleDate
The date used by LCM forCYCLESOON processing. If missing,LCM does not perform CYCLESOONprocessing on this volume.
DataSetIdentifierDSID
char44none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Data Set Identifier The most specific matching data setidentifier found for the data set nameon the Data Set tab of the Methodsfolder (Explorer) or a DATASETstatement (Parameter File).
DataSetNameDSN
char44none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Data Set Name The controlling data set name of thevolume. If the data set is a member ofa Generation Data Group, the.GnnnnVnn qualifier is included.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 161
DataSetReportDSRPT
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
DataSetReport
This volume is covered by the DataSet tab of the Methods folder(Explorer) or a DATASET statement(Parameter File) and is flagged forreporting.
DaysSinceCreationCDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceCreation
The number of days since the data setwas created. The first available fieldof the following determines the dayssince creation:DaysSinceCreationTMS,DaysSinceCreationMVC,DaysSinceCreationVTV.
DaysSinceCreationMVCCMDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceCreation MVC
The number of days since the data setwas created as recorded by VSM.
DaysSinceCreationTMSCTDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceCreation TMS
The number of days since the data setwas created as recorded in theassociated tape management system.
DaysSinceCreationVTVCVDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceCreation VTV
The number of days since the data setwas created as recorded by VSM.
DaysSinceEnterEDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceEnter
The number of days since the volumewas entered into an LSM. If allvolumes of a multi-volume data setare covered by the same ManagementMethod, the most recent enter day forany volume is used by LCM for allvolumes in the multi-volume dataset.
DaysSinceLocationLDAYSLOCDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceLocation
The number of days since the tapewas moved to a tape storage location.
DaysSinceMountMDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceMount
The number of days since the HSClast mounted the volume.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
162 LCM Quick Reference • Revision 01 • E60155-01
DaysSinceReferenceRDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReport
DaysSinceRef.
The number of days since referencefor the volume as used by LCM. Thefirst available field of the followingdetermines the reference day:DaysSinceReferenceTMS,DaysSinceReferenceVTV,DaysSinceReferenceMVC,DaysSinceMount, DaysSinceSelect. Ifall volumes of a multi-volume dataset are covered by the sameManagement Method, the mostrecent reference day for any volumeis used by LCM for all volumes in themulti-volume data set.
DaysSinceReferenceMVCRMDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceRef MVC
The number of days since referenceas recorded by VSM for an MVC(Multiple Volume Cartridge)
DaysSinceReferenceTMSRTDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceRef TMS
The number of days since referenceas recorded in the associated tapemanagement system for volumesbeing treated as a unit (Multi-volumesupport).
DaysSinceReferenceVTVRVDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceRef VTV
The number of days since referenceas recorded by VSM for a VTV(Virtual Tape Volume)
DaysSinceSelectSDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysSinceSelect
The number of days since the volumewas selected by the HSC.
DaysTillCycleCYDAYSDAYSTILLEXPIREXDAYS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
DaysTillCycle
The number of days LCM uses forCYCLESOON processing. If missing,LCM will not perform CYCLESOONprocessing on this volume.
Deleted boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Deleted The volume is marked deleted in thetape management system. Note: Thevalue of this field is false for allvolumes known to LCM unless:Explorer: The checkbox on theDeleted tab of the TMS object is notchecked; Parameter File: theNODELETECHECK parameter isspecified on the TMS statement.
EjectViaLSMGroupEJLSMGRP
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
EjectViaLSM Group
The LSM Group from which LCMplans to eject the volume.
EjectViaLSMIDEJLSMID
char (alternate)5none
Custom MVC_VTVReportCustom VolumeReport
EjectViaLSM ID
The LSM ID from which LCM plansto eject the volume.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 163
EjectViaLSMNameEJLSMNAME
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
EjectViaLSM Name
The Name of the LSM from whichLCM plans to eject the volume.
Encrypted boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Encrypted This field is valid only if LCM isrunning with NCS 6.2 or later.This volume is encrypted.
EnterDateENDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
EnterDate
The date the volume was entered intoan LSM. If all volumes of a multi-volume data set are covered by thesame Management Method, the mostrecent enter date of any volume isused by LCM for all volumes in themulti-volume data set.
Enters int7sum
Custom LSM Report Enters The total number of volumes thatneed to be entered into the LSM.
EnterTimeENTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
EnterTime
The time of day the volume wasentered.
Errant boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Errant The HSC has marked this volumeerrant. Requires HSC PTF L1H10CC(HSC 4.0) or L1H10CE (HSC 4.1) toproduce accurate information.
ExLblReadableEXLBLRD
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
External LabelOCR Readable
The cartridge external label is OCRreadable.
ExpireDateEXPDTXDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ExpireDate
The date the volume will expirebased on the expiration date in thetape management system. Specialexpire dates are: AGE/nnn - Expiresnnn days from create or move date;CATLG - Expires when the data setname no longer exists in the MVSsystem catalog, regardless of the keepdate; CATLG/nnn - Expires nnn daysafter creation and the data set nolonger resides in the MVS catalog;CYCLE/nnn - Oldest data set expiresafter nnn cycles; FOREIGN - Foreignvolume; LDATE/nnn - Expires nnndays after last used; MSG/nnn - TMSuser-defined; PERM - Never expires;STATS/nnn - Never expires;USER/nnn - Never expires; ZEROS -CA-TLMS value was zeros; Juliandate - Expires on the julian date.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
164 LCM Quick Reference • Revision 01 • E60155-01
ExternalLabelEXLBL
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ExternalLabel
The cartridge has an external label.
ExternallyManagedEXTERNAL
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ExternallyManaged
The volume is defined to the tapemanagement system, but its use iscontrolled by some other softwaresystem.
FailedEjectsFEJ
int7sum
Custom LSM Report FailedEjects
The number of volumes that failed tobe be ejected from the LSM. This fieldis only meaningful on aPOSTACTION report.
FailedMoveInsFMOVEINS
int7sum
Custom LSM Report FailedMoveIns
The number of volumes that failed tobe moved into the LSM. This field isonly meaningful on a POSTACTIONreport.
FailedMoveOutsFMOVEOUTS
int7sum
Custom LSM Report FailedMoveOuts
The number of volumes that failed tobe moved out of the LSM. This fieldis only meaningful on aPOSTACTION report.
FrozenToLSMGroup boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Frozen ToLSM Group
The volume has both EJECT(NO) anda specific LSMGRP assigned by itsManagement Method.
GDG boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
GDG The volume is a member of aGeneration Data Group.
GDGWrap boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
GDGWrap
The volume is a member of aGeneration Data Group where theGnnnn number has wrapped from9999 to 0001.
GenerationGEN
int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
GenerationNumber
The relative generation number + 1,based on the tape managementsystem.
Held boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Held The nonscratch volume will not beejected because one of the Held flagswas on. Possible held reasons are:Cyclesoon, Minenter, Minref, orPulllist.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 165
HeldForCycleSoonHCYLSOON
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Held ForCyclesoon
The nonscratch volume will not beejected because the controlling dataset is due to expire within a specifiednumber of days. Controlled by:Explorer: Methods folder Limits tab;Parameter File: the CYCLESOONparameter on the OPTIONSstatement.
HeldForMinEnterHMINENT
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Held ForMinEnter
The nonscratch volume will not beejected because it was entered into anLSM within a specified number ofdays. This is determined by:Explorer: Methods folder Limits tab;Parameter File: the MINENTERparameter on the OPTIONSstatement.
HeldForMinRefHMINREF
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Held ForMinRef
The nonscratch volume will not beejected because it has been referencedwithin a specified number of days.This is determined by: Explorer:Methods folder Limits tab; ParameterFile: the MINREF parameter on theOPTIONS statement.
HeldForPullListHPULLLIST
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Held ForPullList
The nonscratch volume will not beejected because it was found on aPull List.
HoursSinceCreationVTVCVHOURS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
HoursSinceCreation VTV
The number of hours since creationas recorded by VSM for a VTV(Virtual Tape Volume).
HoursSinceReferenceVTVRVHOURS
int5avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
HoursSinceRef VTV
The number of hours since referenceas recorded by VSM for a VTV(Virtual Tape Volume).
HSCScratchHSCSCR
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
HSCScratch
The status recorded by the HSC forthe volume is scratch.
Ignored boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
Ignored LCM does not retain any tapemanagement system information forthis volume and will not eject ormove this volume. This is determinedby: Explorer: the TMS tab of theSubpool object; Parameter File: theIGNORE parameter on the SUBPOOLstatement.
InitialACSIDIACSID
char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialACS ID
The ACS ID in which the volumeresided at the beginning of the LCMrun.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
166 LCM Quick Reference • Revision 01 • E60155-01
InitialAllVolumesIALLVOL
int7sum
Custom LSM Report InitialAllVolumes
The total number of scratch andnonscratch volumes in the LSM at thebeginning of the LCM run.
InitialCleanICLN
int7sum
Custom LSM Report InitialClean
The number of cleaning cartridges inthe LSM at the beginning of the LCMrun.
InitialFreeCellsIFCELL
int7sum
Custom LSM Report InitialFreeCells
The number of free cells in the LSMat the beginning of the LCM run.
InitialLSMCellILSMCELL
char (alternate)14none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSM Cell
The coordinates of the LSM Cellwhere the volume resided at thebeginning of the LCM run.
InitialLSMColumnILSMCOL
int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSMColumn
The LSM Column number where thevolume resided at the beginning ofthe LCM run.
InitialLSMGroupILSMGRP
char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSM Group
The name of the LSM Group wherethe volume resided at the beginningof the LCM run.
InitialLSMIDILSMID
char (alternate)5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSM ID
The LSM ID where the volumeresided at the beginning of the LCMrun.
InitialLSMNameILSMNAME
char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSM Name
The Name of the LSM where thevolume resided at the beginning ofthe LCM run.
InitialLSMPanelILSMPNL
int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSMPanel
The LSM Panel number where thevolume resided at the beginning ofthe LCM run.
InitialLSMPanelFrozenILSMPNLFZ
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSM PanelFrozen
The volume resided in a frozen panelat the beginning of the LCM run.
InitialLSMRowILSMROW
int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InitialLSMRow
The LSM Row number where thevolume resided at the beginning ofthe LCM run.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 167
InitialNonScratchINONSCR
int7sum
Custom LSM Report InitialNonScratch
The total number of nonscratchvolumes in the LSM at the beginningof the LCM run.
InitialScratchISCR
int7sum
Custom LSM Report InitialScratch
The total number of scratch volumesin the LSM at the beginning of theLCM run.
InLSM boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
InLSM
The volume is in an LSM at thebeginning of an LCM run.
InManagedLSMINMANLSM
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
InManagedLSM
The volume is in a MANAGEd LSMat the beginning of an LCM run.
InTMS boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
InTMS
The volume is in a tape managementsystem defined to LCM.
LastUsedTMSDriveLUTDRIVE
char (alternate)4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
LastUsedDrive
The unit address of the tape drive onwhich the tape was last used, printedas a hexadecimal character string.
LocationCodeLOCCODE
char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
LocationCode
The identifier assigned to a tapevolume by the tape managementsystem to identify the intendedstorage location for that volume.
LocationDateLDATELOCDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
LocationDate
The date the volume was moved tothe tape management system's tapestorage location.
LocationNameLOCNAME
char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
LocationName
The name of the tape storagelocation. Location Names are notdefined to the tape managementsystem, but are assigned by LCMfrom tape management systeminformation as specified by: Explorer:the Location object Codes tab;Parameter File: the Locationstatement Code parameter.
LocationSequenceLOCSEQ
int5none
Custom MVC_VTVReportCustom VolumeReport
LocationSequence
The number that LCM assigned toeach location to determine the orderthat tapes at that location are ejected.Controlled by: Explorer: theLocations folder Order tab;Parameter File: the order of Locationstatements in the parameter file.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
168 LCM Quick Reference • Revision 01 • E60155-01
LSMGroupLSMGRP
char (alternate)10none
Custom LSM Report LSMGroup
The LSM Group Name assigned tothe volume by the ManagementMethod.
LSMID char (alternate)5none
Custom LSM Report LSMID
The AA:LL form identifier (AA is thetwo-character hexadecimal ACSnumber and LL is the two-characterhexadecimal LSM number) thatuniquely identifies an LSM to a hostsystem.
LSMName char (alternate)10none
Custom LSM Report LSMName
The name given to the LSM by:Explorer: the LSM Names tab of theACS object; Parameter File: the Lsmidparameter of a Manage orUnmanaged statement.
Managed boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
Managed The volume is covered by aMANAGE statement.
ManagedIndividuallyMANIND
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
ManagedIndividually
The volume is managed individually,but is part of a multi-volume data set.This happens if all of the volumes inthe volume set are not assigned thesame Management Method.
ManagedLSMMANLSM
boolSee notes below.true
Custom LSM Report ManagedLSM
The LSM is managed by this LCMrun. This is specified by: Explorer:editing the properties of an LSMGroup listed on the LSM Group tabof a Run object; Parameter File:coverage by a Manage statement.
ManagementClassMGMTCLAS
char (alternate)8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ManagementClass
The name of the SMS ManagementClass for the volume.
MaxUseCount int4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MaximumUseCount
The maximum usage for a cleaningcartridge set by the VOLATTRMaxclean or MNTD Maxclean value.
MediaSourceMEDIAS
char (alternate)6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MediaSource
The source of information used todetermine the volume's MediaTypevalue.
DFLTThe media type defaulted toStandard.HSCCDSThe HSC Control Data Set.VOLDEFThe VOLATTR statements containedin the file identified by the HSCVOLDEF parameter.VSMVTVVSM Virtual Tape Volumeinformation.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 169
MediaTypeMEDIAMEDIAT
char (alternate)8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MediaType
The media type of the volume.
StandardStandard length 3480 cartridge.Long3490E extended capacity cartridge.DD3A10 Gb capacity helical cartridge.DD3B25 Gb capacity helical cartridge.DD3C50 Gb capacity helical cartridge.DD3DCleaning cartridge for helical drives.STK1R9840 data cartridge.STK1UCleaning cartridge for 9840transports.STK1YCleaning cartridge for 9840Dtransports.STK2PT9940A data cartridge.STK2WCleaning cartridge for T9940transports.T10000TTSmaller-capacity 1TB T10000Ccartridge.T10000TST10000 "sport" cartridge.T10000T1Full-capacity 500GB T10000A or 1TBT10000B cartridge.T10000T2Full-capacity 5TB T10000C cartridge.T10000CCT10000C cleaning cartridge.T10000CLT10000A, T10000B, or T10000Ccleaning cartridge.T10000CTT10000A or T10000B cleaningcartridge.ZCART9490EE ZCART media cartridge.LTO-100GLTO 100GB capacity cartridge.LTO-200GLTO 200GB capacity cartridge.LTO-35GLTO 35GB capacity cartridge.LTO-400GLTO 400GB capacity cartridge.LTO-400WLTO 400Gb capacity WORMcartridge.LTO-800GLTO 800GB capacity cartridgeLTO-800WLTO 800GB capacity WORMcartridgeLTO-1.5TLTO 1.5TB capacity cartridge.LTO-1.5WLTO Generation 5 WORM cartridge.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
170 LCM Quick Reference • Revision 01 • E60155-01
MediaTypeMEDIAMEDIAT
LTO-2.5TLTO 2.5TB capacity cartridge.LTO-2.5WLTO Generation 5 WORM cartridge.LTO-CLN1LTO cleaning type 1 cartridge.LTO-CLN2LTO cleaning type 2 cartridge.LTO-CLNULTO universal cleaning cartridge.SDLTSDLT 160GB cartridge.SDLT-1SDLT Generation 1 cartridge.SDLT-4SDLT Generation 4 cartridge.SDLT-S2SDLT Generation S2 cartridge.SDLT-S3SDLT Generation S3 cartridge.SDLT-S4SDLT Generation S4 cartridge.SDLTCSDLT cleaning cartridge.VIRTUALVirtual Tape Volume (VTV) in theStorageTek Virtual Storage Managersystem.
MethodColumnMTHCOL
int2none
Custom MVC_VTVReportCustom VolumeReport
MethodColumn
The column in the LCM parameterfile (generated when using theExplorer) in which the associatedManagement Method was coded. Seealso the MethodName andMethodLineNum fields.
MethodCondNumMTHCOND
int4none
Custom MVC_VTVReportCustom VolumeReport
MethodCond Num
Explorer: The number of theCondition of the Method object thatapplies to this volume. A value ofzero indicates that the OTHERWISEattributes for the Method wereapplied. Parameter File: Theoccurrence of the Cond parameter onthe Method statement that applies tothis volume. A value of zero indicatesthat the default attributes for theMethod were applied.
MethodEjectMTHEJ
char (alternate)8none
Custom MVC_VTVReportCustom VolumeReport
MethodEject
The Eject attribute of theManagement Method assigned to thisvolume.
ASNEEDEDEject this volume only when room isneeded to meet free cell and/orvolume management criteria.NONever eject this volume.YESAlways eject this volume.
MethodLineNumMTHLINE
int5none
Custom MVC_VTVReportCustom VolumeReport
MethodLine Num
The line in the LCM parameter file(generated when using the Explorer)in which the associated ManagementMethod was coded. See also theMethodName and MethodColumnfields.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 171
MethodLSMGroupMTHLSMGRP
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
MethodLSM Group
The LSM Group assigned to thisvolume by its Management Method.
MethodNameMETHODMTHMTHNAME
char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MethodName
The name of the ManagementMethod assigned to this volume.
MethodOrderMTHORD
int3none
Custom MVC_VTVReportCustom VolumeReport
MethodOrder
The order in which the volume maybe picked for ejection or demotion.This is determined by: Explorer: thePick Order of the applicableCondition on the Conditions tab ofthe Method object; Parameter File:the Order(n) parameter of theMethod statement.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
172 LCM Quick Reference • Revision 01 • E60155-01
MethodReasonMTHRSN
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
MethodReason
The reason that the associatedManagement Method was chosen.
CleanCleaning cartridge criteria.DatasetExplorer: A Data Set Identifierspecified on the Methods folder DataSet tab applied to this volume.Parameter File: A Dataset statementapplied to this volume.DefaultNo specified condition applied to thisvolume.EjBadThe tape management systemindicated that this volume isdefective and: Explorer: the BadScratch option on the Action tab ofthe Run object was checked;Parameter File: the Ejbad parameteron the Options statement wasspecified.ExternalThe volume is marked as externallymanaged in the tape managementsystem.HSCOnlyThe tape volume is not in a tapemanagement system.IgnoreExplorer: The TMS tab of the Subpoolobject specified that LCM should nottake actions such as sync, eject, andmove for this volume's Subpool.Parameter File: The Ignore parameteron the Subpool statement applied tothis volume.LocationExplorer: The Location tab of theMethods folder specified that thevolume should be ejected. ParameterFile: A Location statement applied tothis volume and specified aManagement Method with the Ejectattribute.LSMEjectExplorer: A Method object with theEject(Yes) attribute applied to thisvolume. Parameter File: An Eject(Yes)parameter on a Method statementapplied to this volume.LSMNeverEjExplorer: A Method object with theEject(No) attribute applied to thisvolume. Parameter File: An Eject(No)parameter on a Method statementapplied to this volume.MethodFileExplorer: The file specified forMethod Input on the File tab of theRun object had an entry for thisvolume. Parameter File: The filespecified on the Methodfileparameter of the Options statementhad an entry for this volume.ScratchScratch criteria.SetMethodExplorer: The Advanced tab of theMethods folder or a Custom Actionspecified on the Action tab of the Runobject applied to this volume.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 173Parameter File: A Set Methodstatement applied to this volume.SubpoolExplorer: Not applicable. ParameterFile: A Subpool statement applied tothis volume.
MethodUncondMTHUNCOND
boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
MethodUNCOND
Explorer: This volume is externallymanaged and the External tab of theMethods folder indicated that theMethod could not be overridden, orthe volume's Method was set usingthe Method Input File and its entryincluded the U indicator. ParameterFile: This volume's method wasassigned using the Uncond keyword.Uncond may be specified for theExternal or HSCOnly options, and bythe U indicator in the Methodfile.
MountDateMDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MountDate
The date the volume was lastmounted in an LSM.
Mounted boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VolumeCurrentlyMounted
The volume is currently mounted.
MountTimeMTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MountTime
The time of day the volume was lastmounted in an LSM.
MVC boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVC The volume is a Multiple VolumeCartridge for VSM.
MVCAudit boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCAudit
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC is either being audited orthe audit failed. If the audit failed,VTCS will not use the MVC formigration. To clear this condition,rerun the AUDIT against this MVC.
MVCAvailableMVCAVAIL
int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVC%Available
The percentage of the MVC availablefor use.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
174 LCM Quick Reference • Revision 01 • E60155-01
MVCBroken boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCBroken
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC has an error that should beinvestigated. The error might notmake the MVC unusable, but VTCSdoes not select the MVC formigration for 12 hours after thisstatus has been set to true. After the12 hour period, the MVC is leastpreferred for subsequent migrations,and recalls from the MVC can causeVTCS to drain it. This error conditioncan be accompanied by messagesSLS6686, SLS6687, SLS6688, SLS6690and/or SLS6693. Any of thefollowing conditions can cause thisMVC error: MVC corrupted byanother job (other than VTCS/VTSS).Attempt to use a read-only MVC formigration. A DDR swap failure. AnRTD failure.
MVCConsolidateDate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCConsolidateDate
This field is valid only if LCM isrunning with NCS 6.2 or later.The date on which the MVC wasconsolidated as recorded by VSM.
MVCConsolidateTime timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCConsolidateTime
This field is valid only if LCM isrunning with NCS 6.2 or later.For a consolidation MVC, this fielddisplays the time of theconsolidation.
MVCConsolidation boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCConsolidation
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC is a consolidation MVC.
MVCDataCheck boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCDataCheck
This field is valid only if LCM isrunning with NCS 6.2 or later.A data check was reported for thisMVC. VSM will not use this MVCagain for migration.
MVCDraining boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCDrained
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC is being drained because ofone of: 1) an automatic drain ordemand reclaim. 2) an explicitMVCDRain command, 3) Theprevious DRAIN request failed, inwhich case VTCS will not use theMVC for migration. To clear thiscondition, enter MVCDRain againstMVC without the EJect option.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 175
MVCEject boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCEject
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC is in the process of ejecteither because you issuedMVCDRainEJect or the MVC wasejected for update by a RACROUTEcall. The MVC will not be used againfor migration or recall. To clear thiscondition, use MVCDRain againstMVC without the EJect option.
MVCExport boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCExport
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC is an export MVC.
MVCFragmentedMVCFRAG
int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVC%Fragmented
The percentage of the MVC that isnot available due to fragmentation.
MVCFull boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCFull
This field is valid only if LCM isrunning with NCS 6.2 or later.Their is no space available on theMVC.
MVCInitialized boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCInitialized
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC has been initialized.
MVCInUse int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVC%In Use
The percentage of the MVC used byvalid Virtual Tape Volumes.
MVCInvalidMIR boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCInvalidMIR
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC has an invalid MIR.
MVCLastMigrateDate Date MVC Migrate Date Last MVC Migrate Date
MVCLastMigrateTime Time MVC Migrate Time Last MVC Migrate Time
MVCLost boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCLost
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC was not mounted inresponse to the last mount request.The MVC can still be used formigration, but will not select theMVC for migration for 12 hours afterit is marked lost. After the 12 hourperiod, the MVC will be leastpreferred. This condition will clearitself the next time that the MVC ismounted.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
176 LCM Quick Reference • Revision 01 • E60155-01
MVCMaximumReached boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCMaximumVTVs
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC has reached the maximumVTVs per MVC.
MVCMediaSize int9sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCMediaSize (MB)
This field is valid only if LCM isrunning with NCS 6.2 or later.The size in MB of the MVC. This isdetermined only after VTCS has usedan MVC. "UNKNOWN" appears inthis field until VTCS migrates a VTVto the MVC.
MVCMountDate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MountMVCDate
This field is valid only if LCM isrunning with NCS 6.2 or later.The date on which the MVC wasmounted, as recorded by VTSS.
MVCMountTime timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCMountTime
This field is valid only if LCM isrunning with NCS 6.2 or later.The time the MVC was last mounted,as recorded by VTSS.
MVCPoolName char (alternate)13none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCPoolName
This field is valid only if LCM isrunning with NCS 6.2 or later.MVC Pool Name from the VTCSMVCPOOL control statement.
MVCReadOnly boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCReadOnly
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC has been marked read-only.
MVCRetired boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCRetired
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC is retired. VTCS will recallfrom, but not migrate to, the MVC.Replace the MVC as soon as possible.
MVCStorageClassMVCSTORCLASSSTORAGECLASSSTORCLAS
char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCStorageClass
This field is valid only if LCM isrunning with NCS 6.2 or later.The VTCS Storage Class for thevolume.
MVCUsableForMigration boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCUsableMigration
This field is valid only if LCM isrunning with NCS 6.2 or later.Indicates whether the MVC can beused for migration.
MVCUsededMVCTimesMount
int9sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCUsed(MB)
The number of times the MVC hasbeen mounted.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 177
MVCVTSS char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVC VTSSLastMounted
This field is valid only if LCM isrunning with NCS 6.2 or later.VTSS name where the MVC was lastused.
MVCWarrantyExpired boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
MVCWarrantyExpired
This field is valid only if LCM isrunning with NCS 6.2 or later.The MVC’s warranty has expired.VTCS continues to use the MVC. Youshould start making plans to replacethe MVC when it reaches Retiredstate.
NonScratchNONSCR
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
Non-Scratch
The volume is not classified as ascratch volume.
NotuseableNOUSE
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
NotUseable
The HSC has marked this volume asnot useable.
OnPullListONPL
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
On PullList
The volume is on a Pull List.
OverMaxCleanOverHSCMAXCLN
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
OverMAXCLN
The cleaning cartridge has exceededits maximum usage count.
PermanentReadErrors int5sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
PermanentRead Errors
The number of permanent read errorsfor the volume.
PermanentWriteErrors int5sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
PermanentWrite Errors
The number of permanent writeerrors for the volume.
PickedEntersPICKEDEN
int7sum
Custom LSM Report PickedEnters
The number of scratch volumes LCMhas picked by volser to enter into theLSM.
PlannedACSIDPACSID
char (alternate)2none
Custom MVC_VTVReportCustom VolumeReport
PlannedACS ID
The ACS ID LCM has determined thevolume should be in at the end of theLCM run. This is planned only.Check the ActionStatus field todetermine if this is the final ACS ID.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
178 LCM Quick Reference • Revision 01 • E60155-01
PlannedCleanPCLN
int7sum
Custom LSM Report PlannedClean
The planned number of cleaningcartridges in the LSM at the end ofthe LCM run.
PlannedEjectsPEJ
int7sum
Custom LSM Report PlannedEjects
The projected number of volumesthat will be ejected from the LSM.
PlannedFreeCellsPFCELL
int7sum
Custom LSM Report PlannedFreeCells
The total number of free cellsprojected to be in the LSM after allscheduled cartridge moves, ejects,and enters have been performed.
PlannedLSMGroupPLSMGRP
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
PlannedLSM Group
The LSM Group LCM hasdetermined the volume should be inat the end of the LCM run. This isplanned only. Check the ActionStatusfield to determine if this is the finalLSM Group.
PlannedLSMIDPLSMID
char (alternate)5none
Custom MVC_VTVReportCustom VolumeReport
PlannedLSM ID
The LSM ID LCM has determined thevolume should be in at the end of theLCM run. This is planned only.Check the ActionStatus field todetermine if this is the final LSM ID.
PlannedLSMNamePLSMNAME
char (alternate)10none
Custom MVC_VTVReportCustom VolumeReport
PlannedLSM Name
The LSM Name LCM has determinedthe volume should be in at the end ofthe LCM run. This is planned only.Check the ActionStatus field todetermine if this is the final LSMName.
PlannedMoveInsPMOVEINS
int7sum
Custom LSM Report PlannedMoveIns
The total number of volumesprojected to be moved into the LSM.
PlannedMoveOutsPMOVEOUTS
int7sum
Custom LSM Report PlannedMoveOuts
The total number of volumesprojected to be moved out of theLSM.
PlannedNonScratchPNONSCR
int7sum
Custom LSM Report PlannedNonScratch
The total number of nonscratchvolumes LCM has projected to be inthe LSM.
PlannedScratchPSCR
int7sum
Custom LSM Report PlannedScratch
Total number of scratch volumesLCM has projected to be in the LSM.
PullListEntersPLENTERS
int7sum
Custom LSM Report Pull ListEnters
The total number of Pull Listvolumes that need to be entered intothe LSM.
PullListNamePLNAME
char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Pull ListName
The name of the Pull List for thevolume.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 179
RecordingTechniqueRecTech
char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
RecordingTechnique
The recording technique associatedwith a volume's media This is themethod used to record data tracks onthe tape surface for the volume.
ReferenceDateRDATE
dateSee notes below.none
Custom MVC_VTVReportCustom VolumeReport
ReferenceDate
The date of last reference for thevolume. This is the value used byLCM. The first available field of thefollowing determines the referencedate: ReferenceTMSDate,ReferenceMVCDate,ReferenceVTVDate, MountDate,SelectDate. If all volumes of a multi-volume data set are covered by thesame Management Method, the mostrecent reference date for any volumewill be used by LCM for all volumesin the multi-volume data set.
ReferenceMVCDateRMDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ReferenceMVCDate
The date on which the MVC was lastreferenced, as recorded by VSM.
ReferenceTMSDateRTDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ReferenceTMSDate
The date of the last reference, asrecorded in the associated tapemanagement system, for volumesbeing treated as a unit (Multi-volumesupport).
ReferenceVTVDateRVDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReport
ReferenceVTVDate
The date on which the VTV was lastreferenced, as recorded by VSM.
ReferenceVTVTimeRVTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ReferenceVTVTime
The time of day the volume was lastreferenced, as recorded by VSM.
RunName char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Run Name The name of the Run object from theJCL EXEC statement Run PARM.
RunType char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Run Type The RunType from the JCL EXECstatement RunType PARM.
ScratchSCR
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
Scratch The volume is classified as a scratchvolume by LCM.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
180 LCM Quick Reference • Revision 01 • E60155-01
ScratchedSCRED
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
Scratched LCM marked the volume as scratchin the HSC or VSM.
ScratchEntersSCRENTERS
int7sum
Custom LSM Report ScratchEnters
The total number of scratch volumesthat need to be entered into the LSM.
SelectCountSCOUNT
int5none
ActionCustom MVC_VTVReportCustom VolumeReport
SelectCount
The number of times the volume hasbeen selected by the HSC.
SelectDateSDATE
dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
SelectDate
The date the volume was last selectedin an LSM.
Selected boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VolumeCurrentlySelected
The volume is currently selected.
SelectTimeSTIME
timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
SelectTime
The time of day the volume wasselected by the HSC.
SerialSERVOLVOLSERVOLUME
char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VolumeSerial
The 6-character identifier of a tapevolume.
Serial1SER1
char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
FirstSerial
The 6-character identifier of the firstvolume of the volume set associatedwith this volume.
SL8500Cell char24none
Custom MVC_VTVReportCustom VolumeReport
SL8500 Cell The physical cell location of a volumethat resides in an SL8500 library. Thevalue of this field is missing forvolumes that do not reside in anSL8500.
Slot char8none
ActionCustom MVC_VTVReportCustom VolumeReport
Slot The value assigned to a tape volumeby the tape management system topinpoint the storage place for thevolume.
StatusChangedSTCHG
int7sum
Custom LSM Report StatusChanged
The total number of volumes whosescratch status was changed in theHSC CDS by the LCM run. It ispossible for the same volume to bescratched and unscratched in thesame LCM run. However, this field isonly incremented once per volume.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 181
StatusErrantSTERRANT
int7sum
Custom LSM Report StatusErrant
The total number of volumes whosestatus was marked errant in the HSCCDS.
StatusExternalLabelSTEXTLBL
int7sum
Custom LSM Report StatusExternalLabel
The total number of volumes whosestatus was marked as having anexternal label in the HSC CDS.
StatusNoExternalLabelSTNOEXTLBL
int7sum
Custom LSM Report StatusNo ExternalLabel
The total number of volumes whosestatus was marked as having noexternal label in the HSC CDS.
StatusNotUseableSTNTUSBL
int7sum
Custom LSM Report StatusNotUseable
The total number of volumes whosestatus was marked not useable in theHSC CDS.
StatusOverMaxCleanSTOVRMXCLN
int7sum
Custom LSM Report StatusOverMaxClean
The total number of volumes whosestatus was marked over max clean inthe HSC CDS.
StatusScratchedSTSCRED
int7sum
Custom LSM Report StatusScratched
The total number of volumes whosestatus was marked scratched in theHSC CDS.
StatusSelectedSTSELECT
int7sum
Custom LSM Report StatusSelected
The total number of volumes whosestatus was marked selected in theHSC CDS.
StatusUnreadableLabelSTUNRDLBL
int7sum
Custom LSM Report StatusUnreadableLabel
The total number of volumes whosestatus was marked as having anunreadable label in the HSC CDS.
StatusUnscratchedSTUNSCRED
int7sum
Custom LSM Report StatusUnscratched
The total number of volumes whosestatus was marked unscratched in theHSC CDS.
StatusWrongSTWRNG
int7sum
Custom LSM Report StatusWrong
The total number of volumes whosescratch status in the HSC CDS is notcorrect.
SubpoolSP
char (alternate)16none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Subpool The name of the Subpool managing agroup of volume serial numbers. Thisis defined in the LCM Subpool object(Explorer) or Subpool statement(Parameter File).
SubpoolIdSPID
char (alternate)13none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
SubpoolID
Volume subpool ID from the HSC.This will be the 13-character name ofthe pool if using HSC SCRPOOLstatements, or the 3-digit subpoolindex number if using SLSUX03.
SubpoolLabelTypeSPLBLTYP
char (alternate)3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
SubpoolLabel Type
Volume subpool label type from theHSC.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
182 LCM Quick Reference • Revision 01 • E60155-01
SuccessfulEjectsSUCCEJ
int7sum
Custom LSM Report SuccessfulEjects
The number of volumes that weresuccessfully ejected from the LSM.This field is only meaningful on aPOSTACTION report.
SuccessfulMoveInsSUCCMOVEINS
int7sum
Custom LSM Report SuccessfulMoveIns
The total number of volumes movedinto the LSM. This field is onlymeaningful on a POSTACTIONreport.
SuccessfulMoveOutsSUCCMOVEOUTS
int7sum
Custom LSM Report SuccessfulMoveOuts
The total number of volumes movedout of the LSM. This field is onlymeaningful on a POSTACTIONreport.
TapeGroupTG
char (alternate)25none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
Tape Group The name of the tape group of avolume. Explorer: This is defined onthe Media tab of the Subpool object.Parameter File: This is defined in theMedia parameter of the Subpoolstatement.
TemporaryReadErrors int5sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TemporaryRead Errors
The number of temporary read errorsfor the volume.
TemporaryWriteErrors int5sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TemporaryWrite Errors
The number of temporary writeerrors for the volume.
TMSBad boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
TMS Bad The volume has been markeddefective in the tape managementsystem.
TMSExpired boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
TMS Expired The volume is marked expired in thetape management system.
TMSName char (alternate)10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TMSName
The name of the tape managementsystem defined on the TMSstatement.
TMSReel boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
TMS Reel The volume is marked as a 9-trackreel tape in the tape managementsystem.
TMSScratchTMSSCR
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
TMSScratch
The tape management system has thescratch flag set for this volume.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 183
TMSUse int5none
ActionCustom MVC_VTVReportCustom VolumeReport
TMS UseCount
The number of times the volume hasbeen used.
UnscratchedUNSCRED
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
Unscratched LCM marked the volume as notscratch in the HSC or VSM.
VaultAssignmentDate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultAssignmentDate
The Date the volume was firstassigned to the External Vault.
VaultAssignmentTime timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultAssignmentTime
Time the volume was first assignedto the External Vault.
VaultName char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultName
The name of the vault.
VaultReturnDate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultReturnDate
The Date the volume can be returnedto the External Vault.
VaultReturnTime timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultReturnTime
Time the volume can be returned tothe External Vault.
VaultSlot char10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultSlot
The assigned External Vault Slotvalue.
VaultSlotsAvailable int ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultSlots Available
Vault slots available for vaultname asreported by ELS.
VaultSlotsInUse int ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VaultSlots In Use
Vault slots available for vaultname asreported by ELS.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
184 LCM Quick Reference • Revision 01 • E60155-01
VolumeSequenceNumberVOLSEQ
int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
SeqNum
The volume sequence number of thevolume.
VolumesIgnoredVOLIGNRD
int7sum
Custom LSM Report VolumesIgnored
The total number of volumesignored. This is determined by:Explorer: the TMS tab of the Subpoolobject; Parameter File: the Ignoreparameter on the Subpool statement.
VTV boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTV The volume is a Virtual Tape Volume(VTV), as reported by VSM.
VTVCompressionPercentage
int2avg
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVCompressionPercentage
This field is valid only if LCM isrunning with NCS 6.2 or later.This is the difference between theuncompressed and compressed VTVsize expressed as a percentage of theuncompressed VTV size. Forexample, if a 100MB VTV compressesto 40MB, then the compressionpercentage will be given as 60%. Acompression of 0% indicates that nocompression was possible on theVTV.
VTVConsolidated boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVConsolidated
This field is valid only if LCM isrunning with NCS 6.2 or later.Indicates whether a VTV is currentlyconsolidated.
VTVCopyTapePlex1 char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVCopyTapePlex 1
The first copy TapePlex for this VTV.
VTVCopyTapePlex2 char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVCopyTapePlex 2
The second copy TapePlex for thisVTV.
VTVDuplexed boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVDuplexed
The VTV has at least 2 copies.
VTVFenced boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVFenced
This field is valid only if LCM isrunning with NCS 6.2 or later.The VTV's state is unknown to VTSS.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 185
VTVInitialized boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVInitialized
This field is valid only if LCM isrunning with NCS 6.2 or later.The VTV has been initialized byVTSS.
VTVInvalidVTVDELVTVDELETEDVTVINV
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVInvalid
The VTV is invalid in VSM.
VTVManagementClassVTVMGMTCLASVTVMGTCLASS
char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVManagementClass
The VSM management class for theVTV.
VTVMaximumSize int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMaximumSize (MB)
This field is valid only if LCM isrunning with NCS 6.2 or later.The maximum size of the VTV is32GB.
VTVMigratedVTVMIG
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMigrated
The VTV is migrated in VSM.
VTVMountedVTVMNTD
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMounted
The VTV is mounted according toVSM.
VTVMVCID1 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMVC1
The MVC volser on which the VTVresides.
VTVMVCID2 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMVC2
The MVC volser on which aduplicate or consolidation copy ofthe VTV resides. Note: If the VTV isconsolidated during an LCM run, thevalue of this field will be updatedafter the consolidation is performed.The POSTACTION value will reflectthe consolidation MVC for this VTV.
VTVMVCID3 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMVC3
The MVC volser on which aduplicate or consolidation copy ofthe VTV resides.
VTVMVCID4 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVMVC4
The MVC volser on which aduplicate or consolidation copy ofthe VTV resides.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
186 LCM Quick Reference • Revision 01 • E60155-01
VTVNewCreate boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVNewlyCreated
This field is valid only if LCM isrunning with NCS 6.2 or later.Indicates whether the VTV wasnewly created when it was lastresident.
VTVOwningTapePlex char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVOwningTapePlex
The owning TapePlex for this VTV.
VTVPageSize char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVPageSize
The VTV Page Size
Large
Standard
VTVRecallDate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVRecallDate
This field is valid only if LCM isrunning with NCS 6.2 or later.Date VTV was recalled to the VTSSbuffer.
VTVRecallTime timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVRecallTime
This field is valid only if LCM isrunning with NCS 6.2 or later.Time VTV was recalled to the VTSSbuffer.
VTVReplicationStatus char14none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVReplicationStatus
This field is valid only if LCM isrunning with NCS 6.2 or later.Status of VTV replication.
CReplication has completed.RReplication is required but notstartedSReplication has started
VTVResident boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVResident
This field is valid only if LCM isrunning with NCS 6.2 or later.Indicates whether a VTV is residentin a VTSS.
VTVScratchVTVSCR
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVScratch
The VTV is scratch, as recorded byVSM.
VTVSizeCompressed int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVSizeCompressed (MB)
This field is valid only if LCM isrunning with NCS 6.2 or later.The actual compressed size of theVTV in megabytes.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 187
VTVSizeUncompressedVTVMediaSize
int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVSizeUncompressed (MB)
This field is valid only if LCM isrunning with NCS 6.2 or later.The actual uncompressed size of theVTV in megabytes.
VTVTimesRead int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVTimesRead
This field is valid only if LCM isrunning with NCS 6.2 or later.The number of times the VTV hasbeen read.
VTVUnavailableVTVUNAVAIL
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVUnavailable
This field is valid only if LCM isrunning with NCS 6.2 or later.The VTV is unavailable because it iseither mounted, resident, or fencedaccording to VSM.
VTVVTSS char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
VTVVTSS
The Virtual Tape SubSystem (VTSS)in which the VTV resides.
WrongScratchStatusWRNGSCRST
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
WrongScratchStatus
The scratch status indicator in theHSC CDS is incorrect. For volumescovered by HSCUNSCR (Explorer:"Set HSC-scratch indicators to OFF"on the Scratch tab of the Run object),the WrongScratchStatus flag indicatesthat the HSC UNSCRATCH requestfailed. For volumes not covered byHSCUNSCR, the WrongScratchStatusflag indicates that the scratch statusrecorded in the HSC CDS or in VSMdoes not agree with the scratch statusin the TMS. This may occur forvolumes when the Sync or SyncVTVoption (Explorer: Sync tab of Runobject) is not in effect or when theassociated synchronization requestfails. The LCM log file contains amessage for each request failure.LCM does not set theWrongScratchStatus flag for volumesthat are scratch in the TMS but arenot scratch in the HSC or in VSM ifthey are in use at the time LCMattempts the unscratch operation.This is a normal situation that canoccur between the time a tape isallocated and the time it is put backin a cell.
TABLE 3-6 General Fields
Field
TypeSizeSummary Where Available Report Heading Description
188 LCM Quick Reference • Revision 01 • E60155-01
Fields Specific to TMS CA1TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
TM#Dsnbs int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1NumberDSN Blocks
CA-1-specific number of data set name blocks.
TM128trk boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTm128trk
CA-1-specific recording technique. x'E8' indicatesTrk 3590 cartridge tape.
TM18trk boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTm18trk
CA-1-specific recording technique. x'C0' indicates3480 cartridge tape - 18 tracks.
TM3590 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1DenTM3590
CA-1-specific recording density. x'E8' indicates3590 cartridge tape.
TM36Trk boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTm36trk
CA-1-specific recording technique. x'E0' indicates3490 cartridge tape - 36 tracks.
TM36trk2 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTm36trk2
CA-1-specific recording technique. x'E1' indicates3490E cartridge tape - 36 tracks (extended length).
TM38000 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1DenTM38000
CA-1-specific recording density. x'E3' indicates38K bpi (cartridge).
TM38KC boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1DenTM38KC
CA-1-specific recording density. x'E7' indicates38K bpi (cartridge-compacted).
TM9trk boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTm9trk
CA-1-specific recording technique. x'80' indicatesnine track tape.
E60155-01 • Revision 01 Chapter 3 189
TMAbend boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1TmAbend
CA-1-specific internal flag bit x'10'. Volume closedby abend.
TMActvl1 char5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Actvl1
CA-1-specific actual internal volser
TMActvl2 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Actvl2
CA-1-specific actual internal volser
TMAcvoli boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmAcvoli
CA-1-specific internal flag4 bit x'40'. Actual volserin use.
TMAdsnb int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1AddressFirst DSNB
CA-1-specific address (relative to BASE inTMSCTL#2) of first DSNB record associated withthis volume record.
TMAldsnb int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1AddressLast DSNB
CA-1-specific address (relative to BASE inTMSCTL#2) of last DSNB record associated withthis volume record.
TMB1Dis int9none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1B1Dis
CA-1-specific B1 security disclosure label.
TMB1Int int9none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1B1Int
CA-1-specific B1 security integrity label.
TMBadtap boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmBadtap
CA-1-specific internal flag3 bit x'80'. CA-9/R+indicated bad tape, do not mount for scratch.
TMBlkcnt int10none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1BlockCount
CA-1-specific data set block count.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
190 LCM Quick Reference • Revision 01 • E60155-01
TMBlksi int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1BlockSize
CA-1-specific maximum block size.
TMBthdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1BirthDate
CA-1-specific date tape was first used.
TMCatlog boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmCatlog
CA-1-specific internal flag2 bit x'80'. Data set wason MVS catalog.
TMClean boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1TmClean
CA-1-specific internal flag bit x'08'. Volume listedto be cleaned.
TMClncnt int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CleanCount
CA-1-specific number of times tape cleaned.
TMClosed boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1TmClosed
CA-1-specific internal flag bit x'40'. Volume closednormally.
TMCpgm char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreatePGM
CA-1-specific creating program name.
TMCrtdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreateDate
CA-1-specific creation date.
TMCrtti timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreateTime
CA-1-specific creation time.
TMCruni char (alternate)4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreateUnit
CA-1-specific address of creation unit.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 191
TMDatcln dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Last CleanDate
CA-1-specific date tape was last cleaned.
TMDdname char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreateDdname
CA-1-specific creating ddname.
TMDegau boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4Degaussed
CA-1-specific internal flag4 bit x'10'. Tape hasbeen degaussed.
TMDelet boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1Deleted
CA-1-specific internal flag bit x'02'. Volume indelete (inactive) status
TMDen char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1RecordingDensity
CA-1-specific recording density.
TMDfault boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1Tmdfault
CA-1-specific internal flag bit x'01'. Volumeeligible for RDS override.
TMDfexu boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmDfexu
CA-1-specific internal flag3 bit x'04'. Defaultexpiration date used at open output.
TMDsn char44none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Data SetName
CA-1-specific data set name.
TMDsn17 char17none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1DSN17
CA-1-specific last 17 bytes of dsn.
TMDynam boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmDynam
CA-1-specific internal flag3 bit x'10'. Controlledby CA-DYNAM/T.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
192 LCM Quick Reference • Revision 01 • E60155-01
TMEcatlg boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmEcatlg
CA-1-specific internal flag2 bit x'08'. Expired fromcatalog control (TMSCTLG).
TMEcycle boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmEcycle
CA-1-specific internal flag2 bit x'04'. Expired fromcycle control (TMSCYCLE).
TMEdmid char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1EDMID
CA-1-specific external data manager id.
TMEdmtap boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmEdmtap
CA-1-specific internal flag3 bit x'20'. Controlledby external data manager.
TMEldate boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmEldate
CA-1-specific internal flag bit x'02'. Expired fromLDATE control (TMSCLEAN).
TMErase boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmErase
CA-1-specific internal flag3 bit x'08'. Data seterase required.
TMEsms boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmEsms
CA-1-specific internal flag4 bit x'80'. Tape expiredby SMS max retention rules.
TMEtms boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmEtms
CA-1-specific internal flag bit x'01'. Expired byTMS.
TMExpdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1ExpireDate
CA-1-specific expiration date.
TMFilcpy boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmFilcpy
CA-1-specific internal flag3 bit x'01'. Created byCA-1/Copycat.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 193
TMFlag1 char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1
CA-1-specific internal flag byte.
TMFlag2 char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2
CA-1-specific internal flag byte.
TMFlag3 char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3
CA-1-specific internal flag byte.
TMFlag4 char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4
CA-1-specific internal flag byte.
TMFlag5 char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag5
CA-1-specific internal flag byte.
TMFlag6 char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag6
CA-1-specific internal flag byte.
TMFrsvol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1FirstSerial
CA-1-specific first volser of data set.
TMIntal boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1TmIntal
CA-1-specific internal flag1 bit x'80'. Internal fieldchanged by user.
TMInuse boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmInuse
CA-1-specific internal flag4 bit x'02'. Tape is in usefor RTS (Real Time Stacking).
TMIscat boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmIscat
CA-1-specific internal flag4 bit x'08'. File on OScatalog.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
194 LCM Quick Reference • Revision 01 • E60155-01
TMJobnm char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreatingJob Name
CA-1-specific creating job name.
TMLasusd dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1LastUsed
CA-1-specific date last used.
TMLasusj char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1LastJob
CA-1-specific job name which last used volume.
TMLasust timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1LastTime
CA-1-specific time last used.
TMLpgm char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1LastPGM
CA-1-specific last used program name.
TMLrecl int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1LRECL
CA-1-specific logical record length.
TMLtype char3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Label
CA-1-specific tape label type. One of SL, SUL, NL,NSL, BLP, AL1, AU1, AL3, AU3.
TMNostak boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmNostak
CA-1-specific internal flag4 bit x'01'. No furtherstacking allowed.
TMNrs boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmNrs
CA-1-specific internal flag4 bit x'04'. Non-residenttape.
TMNxtVol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1NextSerial
CA-1-specific next volser of data set.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 195
TMOutar char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Outcode
CA-1-specific location id of out-of-area tape.
TMOutdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Outdate
CA-1-specific date tape was marked out-of-area.
TMOutput boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmOutput
CA-1-specific internal flag2 bit x'40'. Volumeopened for output.
TMPrerrc int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Perm ReadSince Clean
CA-1-specific number of permanent read errorssince cleaned.
TMPrerri int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Perm ReadSince Init
CA-1-specific number of permanent read errorssince initialized.
TMPrvvol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1PreviousSerial
CA-1-specific previous volser of data set.
TMPwerrc int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Perm WriteSince Clean
CA-1-specific number of permanent write errorssince cleaned.
TMPwerri int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Perm WriteSince Init
CA-1-specific number of permanent write errorssince initialized.
TMRecfm char3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1RECFM
CA-1-specific record format. One of V, VA, VS,VB, VBM, VBA, VBS, F, FM, FA, FS, FB, FBM,FBA, FBS, U.
TMRedwd1 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTmRedwd1
CA-1-specific recording technique. x'E4' indicatesRedwood 12.5G capacity.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
196 LCM Quick Reference • Revision 01 • E60155-01
TMRedwd2 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTmRedwd2
CA-1-specific recording technique. x'E5' indicatesRedwood 25G capacity.
TMRedwd3 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TrtchTmRedwd3
CA-1-specific recording technique. x'E6' indicatesRedwood 50G capacity.
TMRelevm boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmRelevm
CA-1-specific internal flag3 bit x'40'. Tape releasedby external vault manager.
TMReuse boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2TmReuse
CA-1-specific internal flag2 bit x'20'. Data setrecreated.
TMRobid int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Robid
CA-1-specific robotic device indicator.
TMRobty int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Robty
CA-1-specific tape in robotic device.
TMScrtch boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1Scratch
CA-1-specific internal flag bit x'04'. Volume inscratch status.
TMSlot char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Slot
CA-1-specific vault slot number.
TMSmsmc char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1SMS MgtClass
CA-1-specific SMS management class.
TMStack boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag5TmStack
CA-1-specific internal flag5 bit x'80'. Tape hasbeen used by RTS.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 197
TMStpnam char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CreatingStep
CA-1-specific creating step name.
TMTempds boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag2Temp DS
CA-1-specific internal flag2 bit x'10'. Temporarydata set.
TMTrerrc int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Temp ReadSince Clean
CA-1-specific number of temporary read errorssince cleaned.
TMTrerri int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Temp ReadSince Init
CA-1-specific number of temporary read errorssince initialized.
TMTrtch char (alternate)2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1TRTCH
CA-1-specific recording technique.
TMTwerrc int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Temp WriteSince Clean
CA-1-specific number of temporary write errorssince cleaned.
TMTwerri int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Temp WriteSince Init
CA-1-specific number of temporary write errorssince initialized.
TMUcount int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Uses SinceBirth
CA-1-specific number of times tape opened sincebirthdate.
TMUltif boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag3TmUltif
CA-1-specific internal flag3 bit x'02'. Additionalfiles exist in volume set.
TMUpdate boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag1TmUpdate
CA-1-specific internal flag bit x'20'. Volume recordupdated by user.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
198 LCM Quick Reference • Revision 01 • E60155-01
TMUsecln int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Uses SinceClean
CA-1-specific use count at last cleaning.
TMUserTMAcct
char50none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Acct
CA-1-specific user job accounting area.
TMUsuni char (alternate)4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1LastUnit
CA-1-specific address of unit last used.
TMVabtch int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Batchid
CA-1-specific id of last CA-1 program to updaterecord.
TMVacode int2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Aucode
CA-1-specific audit code.
TMVacpu char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1CPU ID
CA-1-specific id of CPU used for last update.
TMVadate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Last UpdateDate
CA-1-specific date of last update.
TMVaflg1 int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Auflag1
CA-1-specific audit flag.
TMVahook int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Hookid
CA-1-specific id of last intercept to update record.
TMVatime timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Last UpdateTime
CA-1-specific time of last update.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 199
TMVauser char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Userid
CA-1-specific id of last user to update record.
TMVendor char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Vendor
CA-1-specific tape vendor name.
TMVolseq int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1SeqNum
CA-1-specific volume sequence number.
TMVolser char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1VolumeSerial
CA-1-specific volume serial number.
TMVsr boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
CA1Flag4TmVsr
CA-1-specific internal flag4 bit x'20'. Vault specificrequest.
TABLE 3-7 Fields Specific to TMS CA1
Field
TypeSizeSummary Where Available Report Heading Description
200 LCM Quick Reference • Revision 01 • E60155-01
Fields Specific to TMS CTTTABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
CTAccount char50none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTAccountInformation
Control-T-specific accounting information
CTActiveds int4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTActiveLabels
Control-T-specific number of active labels onvolume.
CTBlksize int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTBlockSize
Control-T-specific block size.
CTBlockct int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTBlockCount
Control-T-specific block count.
CTBoxid char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTBoxID
Control-T-specific box ID.
CTChkindt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCheckinDate
Control-T-specific volume check-in date.
CTClncount int8sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCleanCount
Control-T-specific clean count
CTCrecpu char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreateCPU Name
Control-T-specific creation CPU name.
CTCreddn char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreateDD Name
Control-T-specific creation DD name.
E60155-01 • Revision 01 Chapter 3 201
CTCredt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreationDate
Control-T-specific creation date.
CTCrejbn char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreateJobname
Control-T-specific creation job name.
CTCrepgm char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreateProgram Name
Control-T-specific creation program name.
CTCrestep char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreateStepname
Control-T-specific creation stepname.
CTCretm timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreationTime
Control-T-specific creation time
CTCreuad char (alternate)4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCreateUnit Address
Control-T-specific creation unit address.
CTDdsexpd1 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTFirst ExpirationDate
Control-T-specific first expiration date.
CTDdsexpd2 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSecond ExpirationDate
Control-T-specific second expiration date.
CTDdsexpd3 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTThird ExpirationDate
Control-T-specific third expiration date.
CTDeleted boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTDeleted
Control-T-specific volume marked as deleted.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
202 LCM Quick Reference • Revision 01 • E60155-01
CTDsname char44none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTData SetName
Control-T-specific data set name.
CTDsvolser char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTFirstData Set
Control-T-specific first data set begins onvolume.
CTDyndef boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTDynamicallyDefined
Control-T-specific volume dynamically added.
CTEdm boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTEDM
Control-T-specific volume managed by anExternal Data Manager.
CTExprtrn dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTReturnDate
Control-T-specific expected return date from outlocation.
CTExtdel boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTExpireDelete
Control-T-specific volume will be deleted whenexpired.
CTExternal boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTExternalVolume
Control-T-specific external volume.
CTFirstvol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTFirstVolume
Control-T-specific first volume in the multi-volume group.
CTHold boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTHold
Control-T-specific volume is in the main librarydue to recall operation.
CTInatl boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTTapeLibrary
Control-T-specific volume resides inside arobotic tape library.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 203
CTInuse boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTInUse
Control-T-specific volume currently in use.
CTIoerprm int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPermanentRead Errors
Control-T-specific permanent read errors.
CTIoerprmc int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPerm ReadErrors Clean
Control-T-specific permanent read errors sincelast clean.
CTIoertmp int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTTemporaryRead Errors
Control-T-specific temporary read errors.
CTIoertmpc int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTTemp ReadErrors Clean
Control-T-specific temporary read errors sincelast clean
CTIoewprm int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPermanentWrite Errors
Control-T-specific permanent write errors.
CTIoewprmc int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPerm WriteErrors Clean
Control-T-specific permanent write errors sincelast clean.
CTIoewtmp int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTTemporaryWrite Errors
Control-T-specific temporary write errors.
CTIoewtmpc int4sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTTemp WriteErrors Clean
Control-T-specific temporary write errors sincelast clean.
CTLaccdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTJobDate
Control-T-specific last access job date.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
204 LCM Quick Reference • Revision 01 • E60155-01
CTLaccjbn char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTJobname
Control-T-specific last job name that accessedthe volume.
CTLacctm timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTJobTime
Control-T-specific last access job time.
CTLblnum int4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTLabelNumber
Control-T-specific highest label number onvolume.
CTLbltyp char3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTLabelType
Control-T-specific label type
AL
AUL
BLP
NL
NSL
SL
SUL
CTLclndt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTCleanDate
Control-T-specific last clean date.
CTLibrary char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTLibrary
Control-T-specific robotic tape library name.
CTLocation char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTLocation
Control-T-specific current location of volume.
CTLocseq int4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSequenceNumber
Control-T-specific current vault sequencenumber.
CTLrecl int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTRecordLength
Control-T-specific record length.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 205
CTManvlt boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTManuallyVaulted
Control-T-specific volume manually moved tovault.
CTMedia char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTMedia
Control-T-specific media name
CTMovedate dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTMoveDate
Control-T-specific move date.
CTNextvol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTNextVolume
Control-T-specific next volume in the multi-volume group.
CTNostack boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTNoStacking
Control-T-specific volume cannot be a candidatefor dynamic stacking.
CTOut boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTOutsideLibrary
Control-T-specific volume outside the mainlibrary.
CTPendscr boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPendingScratch
Control-T-specific pending scratch status.
CTPendvlt boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPendingVault
Control-T-specific pending vault.
CTPrevvol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPreviousVolume
Control-T-specific previous volume in the multi-volume group.
CTPvlt boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTPotenialVault
Control-T-specific potential vault.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
206 LCM Quick Reference • Revision 01 • E60155-01
CTRecall boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTRecall
Control-T-specific volume will recall back tomain library.
CTRecfm char3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTRecordFormat
Control-T-specific record format.
A
B
D
F
FB
FBA
FBM
FBS
M
S
U
V
VB
VBA
VBM
VBS
VS
CTRecfrom char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTRecalledFrom Vault
Control-T-specific vault name recalled from.
CTRecreate boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTRecreated
Control-T-specific dataset recreated.
CTReturnvl boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTReturn FromVault
Control-T-specific volume returned from vault.
CTRetvltdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTReturn toVault Date
Control-T-specific date to return to vault.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 207
CTScratch boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTScratch
Control-T-specific volume scratch status.
CTScrdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTScratchDate
Control-T-specific volume scratch date.
CTSlname char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSLName
Control-T-specific SL name.
CTSlotnum int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSlotNumber
Control-T-specific slot number
CTSmsmc char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSMS ManagementClass
Control-T-specific SMS management class.
CTSmssg char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSMS StorageGroup
Control-T-specific SMS storage group.
CTVabend boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVolumeAbend
Control-T-specific incomplete data set onvolume.
CTVault char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTFirstVault Name
Control-T-specific first vault name.
CTVault2 char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTSecondVault Name
Control-T-specific second vault name.
CTVault3 char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTThirdVault Name
Control-T-specific third vault name.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
208 LCM Quick Reference • Revision 01 • E60155-01
CTVaulted boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVaulted
Control-T-specific vaulted.
CTVendor char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVendor
Control-T-specific volume's vendor name
CTVformat char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVolumeFormat
Control-T-specific volume format
CTVfreekb int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTFreeKB
Control-T-specific free kilo-bytes on volume.
CTVlrstrt boolSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTRestart
Control-T-specific volume processed under MVSrestart.
CTVltentdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTEntryDate
Control-T-specific vault entry date.
CTVltexpdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVault ExpirationDate
Control-T-specific vault expiration date.
CTVoledmid char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTEDMID
Control-T-specific volume's External DataManager ID.
CTVolexcp int8sum
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTEXCPCount
Control-T-specific EXCP Count
CTVolexpdt dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTExpireDate
Control-T-specific volume expiration date.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 209
CTVolodesc char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTDescription
Control-T-specific volume user description.
CTVolowner char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTOwner
Control-T-specific volume owner
CTVolseq int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVolseqNumber
Control-T-specific volume sequence number in amulti-volume group.
CTVolser char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVolumeSerial
Control-T-specific volume serial number.
CTVolsnum int4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTNumber OfVolumes
Control-T-specific number volumes data setresides on.
CTVoltype char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTVolumeType
Control-T-specific volume type.
L
P
CTVolusect int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTUse CountSince Scratch
Control-T-specific volume use count since lastscratch.
CTVolusetc int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTUseCount
Control-T-specific volume use count.
CTVstkgrp char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTStackingGroup
Control-T-specific stacking group name.
CTVusedkb int8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
ControlTUsedKB
Control-T-specific Used kilo-bytes on volume.
TABLE 3-8 Fields Specific to TMS CTT
Field
TypeSizeSummary Where Available Report Heading Description
210 LCM Quick Reference • Revision 01 • E60155-01
Fields Specific to TMS CustomTABLE 3-9 Fields Specific to TMS Custom
Field
TypeSizeSummary Where Available Report Heading Description
UserBool1 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 1
User-defined Boolean field for a volume.
UserBool10 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 10
User-defined Boolean field for a volume.
UserBool2 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 2
User-defined Boolean field for a volume.
UserBool3 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 3
User-defined Boolean field for a volume.
UserBool4 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 4
User-defined Boolean field for a volume.
UserBool5 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 5
User-defined Boolean field for a volume.
UserBool6 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 6
User-defined Boolean field for a volume.
UserBool7 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 7
User-defined Boolean field for a volume.
UserBool8 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 8
User-defined Boolean field for a volume.
E60155-01 • Revision 01 Chapter 3 211
UserBool9 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 9
User-defined Boolean field for a volume.
UserChar1 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 1
User-defined character field for a volume.
UserChar10 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 10
User-defined character field for a volume.
UserChar2 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 2
User-defined character field for a volume.
UserChar3 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 3
User-defined character field for a volume.
UserChar4 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 4
User-defined character field for a volume.
UserChar5 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 5
User-defined character field for a volume.
UserChar6 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 6
User-defined character field for a volume.
UserChar7 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 7
User-defined character field for a volume.
UserChar8 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 8
User-defined character field for a volume.
TABLE 3-9 Fields Specific to TMS Custom
Field
TypeSizeSummary Where Available Report Heading Description
212 LCM Quick Reference • Revision 01 • E60155-01
UserChar9 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 9
User-defined character field for a volume.
UserDate1 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 1
User-defined date field for a volume.
UserDate10 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 10
User-defined date field for a volume.
UserDate2 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 2
User-defined date field for a volume.
UserDate3 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 3
User-defined date field for a volume.
UserDate4 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 4
User-defined date field for a volume.
UserDate5 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 5
User-defined date field for a volume.
UserDate6 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 6
User-defined date field for a volume.
UserDate7 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 7
User-defined date field for a volume.
UserDate8 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 8
User-defined date field for a volume.
TABLE 3-9 Fields Specific to TMS Custom
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 213
UserDate9 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 9
User-defined date field for a volume.
UserInt1 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 1
User-defined integer field for a volume.
UserInt10 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 10
User-defined integer field for a volume.
UserInt2 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 2
User-defined integer field for a volume.
UserInt3 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 3
User-defined integer field for a volume.
UserInt4 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 4
User-defined integer field for a volume.
UserInt5 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 5
User-defined integer field for a volume.
UserInt6 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 6
User-defined integer field for a volume.
UserInt7 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 7
User-defined integer field for a volume.
UserInt8 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 8
User-defined integer field for a volume.
TABLE 3-9 Fields Specific to TMS Custom
Field
TypeSizeSummary Where Available Report Heading Description
214 LCM Quick Reference • Revision 01 • E60155-01
UserInt9 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 9
User-defined integer field for a volume.
UserTime1 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 1
User-defined time field for a volume.
UserTime10 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 10
User-defined time field for a volume.
UserTime2 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 2
User-defined time field for a volume.
UserTime3 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 3
User-defined time field for a volume.
UserTime4 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 4
User-defined time field for a volume.
UserTime5 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 5
User-defined time field for a volume.
UserTime6 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 6
User-defined time field for a volume.
TABLE 3-9 Fields Specific to TMS Custom
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 215
UserTime7 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 7
User-defined time field for a volume.
UserTime8 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 8
User-defined time field for a volume.
UserTime9 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 9
User-defined time field for a volume.
TABLE 3-9 Fields Specific to TMS Custom
Field
TypeSizeSummary Where Available Report Heading Description
216 LCM Quick Reference • Revision 01 • E60155-01
Fields Specific to TMS OpenTABLE 3-10 Fields Specific to TMS Open
Field
TypeSizeSummary Where Available Report Heading Description
ScratchSCR
boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
Scratch The volume is classified as a scratch volume byLCM.
TMSBad boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
TMS Bad The volume has been marked defective in thetape management system.
TMSExpired boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReport
TMS Expired The volume is marked expired in the tapemanagement system.
TMSReel boolSee notes below.true
Custom MVC_VTVReportCustom VolumeReport
TMS Reel The volume is marked as a 9-track reel tape inthe tape management system.
TMSUse int5none
ActionCustom MVC_VTVReportCustom VolumeReport
TMS UseCount
The number of times the volume has been used.
UserBool1 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 1
User-defined Boolean field for a volume.
UserBool10 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 10
User-defined Boolean field for a volume.
UserBool2 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 2
User-defined Boolean field for a volume.
UserBool3 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 3
User-defined Boolean field for a volume.
UserBool4 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 4
User-defined Boolean field for a volume.
E60155-01 • Revision 01 Chapter 3 217
UserBool5 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 5
User-defined Boolean field for a volume.
UserBool6 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 6
User-defined Boolean field for a volume.
UserBool7 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 7
User-defined Boolean field for a volume.
UserBool8 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 8
User-defined Boolean field for a volume.
UserBool9 boolSee notes below.true
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedBooleanField 9
User-defined Boolean field for a volume.
UserChar1 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 1
User-defined character field for a volume.
UserChar10 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 10
User-defined character field for a volume.
UserChar2 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 2
User-defined character field for a volume.
UserChar3 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 3
User-defined character field for a volume.
UserChar4 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 4
User-defined character field for a volume.
TABLE 3-10 Fields Specific to TMS Open
Field
TypeSizeSummary Where Available Report Heading Description
218 LCM Quick Reference • Revision 01 • E60155-01
UserChar5 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 5
User-defined character field for a volume.
UserChar6 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 6
User-defined character field for a volume.
UserChar7 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 7
User-defined character field for a volume.
UserChar8 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 8
User-defined character field for a volume.
UserChar9 char20none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedCharacterField 9
User-defined character field for a volume.
UserDate1 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 1
User-defined date field for a volume.
UserDate10 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 10
User-defined date field for a volume.
UserDate2 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 2
User-defined date field for a volume.
UserDate3 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 3
User-defined date field for a volume.
UserDate4 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 4
User-defined date field for a volume.
TABLE 3-10 Fields Specific to TMS Open
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 219
UserDate5 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 5
User-defined date field for a volume.
UserDate6 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 6
User-defined date field for a volume.
UserDate7 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 7
User-defined date field for a volume.
UserDate8 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 8
User-defined date field for a volume.
UserDate9 dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedDateField 9
User-defined date field for a volume.
UserInt1 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 1
User-defined integer field for a volume.
UserInt10 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 10
User-defined integer field for a volume.
UserInt2 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 2
User-defined integer field for a volume.
UserInt3 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 3
User-defined integer field for a volume.
UserInt4 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 4
User-defined integer field for a volume.
TABLE 3-10 Fields Specific to TMS Open
Field
TypeSizeSummary Where Available Report Heading Description
220 LCM Quick Reference • Revision 01 • E60155-01
UserInt5 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 5
User-defined integer field for a volume.
UserInt6 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 6
User-defined integer field for a volume.
UserInt7 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 7
User-defined integer field for a volume.
UserInt8 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 8
User-defined integer field for a volume.
UserInt9 int7none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedIntegerField 9
User-defined integer field for a volume.
UserTime1 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 1
User-defined time field for a volume.
UserTime10 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 10
User-defined time field for a volume.
UserTime2 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 2
User-defined time field for a volume.
UserTime3 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 3
User-defined time field for a volume.
UserTime4 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 4
User-defined time field for a volume.
TABLE 3-10 Fields Specific to TMS Open
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 221
UserTime5 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 5
User-defined time field for a volume.
UserTime6 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 6
User-defined time field for a volume.
UserTime7 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 7
User-defined time field for a volume.
UserTime8 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 8
User-defined time field for a volume.
UserTime9 timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
User-DefinedTimeField 9
User-defined time field for a volume.
TABLE 3-10 Fields Specific to TMS Open
Field
TypeSizeSummary Where Available Report Heading Description
222 LCM Quick Reference • Revision 01 • E60155-01
Fields Specific to TMS TLMSTABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
BAAbdflg char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSAbendFlag
TLMS-specific abend flag.
BAActive int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSFileCount
TLMS-specific active file count.
BAAscbse char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSAssociatedBase
TLMS-specific associated base.
BAAscvol char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSAssociatedVolume
TLMS-specific associated volume.
BABlkcnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSBlockCount
TLMS-specific block count.
BABlksiz int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSBlockSize
TLMS-specific block size.
BABuydat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSPurchaseDate
TLMS-specific purchase date.
BACdsexp dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSHighestExpire Date
TLMS-specific highest IBM expiration date onvolume.
BACdsflg char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCDSFlag
TLMS-specific controlling data set flag.
E60155-01 • Revision 01 Chapter 3 223
BACdskep dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSHighestKeep Date
TLMS-specific highest keep date on volume.
BACdsseq int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCDSSeq Num
TLMS-specific controlling data set sequencenumber.
BAChnvol char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMS1st VolumeIn Chain
TLMS-specific 1st volume in chain.
BACkptkn char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCheckpointTaken
TLMS-specific check point taken (Y=Yes; B=No).
BAClncnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCleaningsSince Cert
TLMS-specific cleanings since certified.
BAClndat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCleanDate
TLMS-specific clean date.
BACpusmf char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationCPU SMFid
TLMS-specific creation CPU SMF ID.
BACredat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreateDate
TLMS-specific create date.
BACreddn char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationDdname
TLMS-specific creation ddname.
BACredev char (alternate)3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationDrive
TLMS-specific creation drive.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
224 LCM Quick Reference • Revision 01 • E60155-01
BACrejob char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationJobname
TLMS-specific creation jobname.
BACrepgm char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationPgm
TLMS-specific creation program name.
BACrestp char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationStepname
TLMS-specific creation stepname.
BACretim timeSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCreationTime
TLMS-specific time of day the volume wascreated.
BACrtcnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSTotalCerts
TLMS-specific total certifications.
BACrtdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCertificationDate
TLMS-specific certification date.
BADamcde char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSDamagedCode
TLMS-specific damaged code.
BADen char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSDensity
TLMS-specific density.
BADescde char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSDestroyedCode
TLMS-specific destroyed code.
BADesdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSDestroyedDate
TLMS-specific destroyed date.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 225
BADsn char44none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSData SetName
TLMS-specific data set name.
BAErgcnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCurrentErase gaps
TLMS-specific current erase gaps on volume.
BAErgmax int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMax EraseGaps
TLMS-specific max erase gaps on volume.
BAExpdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSExpireDate
TLMS-specific IBM expiration date for dataset.
BAFilcnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSFileCount
TLMS-specific file count.
BAFilseq int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSFile SeqIn Chain
TLMS-specific file sequence in chain.
BAFlg001 int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSReservedCA-1 Flag1
TLMS-specific reserved for CA-1 FLG001.
BAFlg003 int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSReservedCA-1 Flag3
TLMS-specific reserved for CA-1 FLG003.
BAFlg004 int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSReservedCA-1 Flag4
TLMS-specific reserved for CA-1 FLG004.
BAFlg005 int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSReservedTLMS Flag5
TLMS-specific reserved for TLMS FLG005.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
226 LCM Quick Reference • Revision 01 • E60155-01
BAFlg006 int3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSReservedTLMS Flag6
TLMS-specific reserved for TLMS FLG006.
BAKepdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSKeepDate
TLMS-specific keep date for data set.
BALabtyp char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSLabelType
TLMS-specific label type.
BALasdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSLast UsedDate
TLMS-specific last used date.
BALasdev char (alternate)3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSLast UsedDrive
TLMS-specific last used drive.
BALasjob char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSLast UsedJobname
TLMS-specific last used jobname.
BALoc char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSVolumeLocation
TLMS-specific volume location.
BALoscde char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSLostCode
TLMS-specific lost code.
BAMds1st char (alternate)8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-dsnFirst Ptr
TLMS-specific multi-dataset first chain pointer.
BAMdslst char (alternate)8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-dsnLast Ptr
TLMS-specific multi-dataset last chain pointer.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 227
BAMovdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSDateMoved
TLMS-specific date volume moved.
BAMvlcnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSBAMvltabVolume Count
TLMS-specific count of volumes in BAMvltab.
BAMvlseq1 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSeq Num 1
TLMS-specific multi-volume sequence number1.
BAMvlseq2 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSeq Num 2
TLMS-specific multi-volume sequence number2.
BAMvlseq3 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSeq Num 3
TLMS-specific multi-volume sequence number3.
BAMvlseq4 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSeq Num 4
TLMS-specific multi-volume sequence number4.
BAMvlseq5 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSeq Num 5
TLMS-specific multi-volume sequence number5.
BAMvlvol1 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSerial 1
TLMS-specific multi-volume chain serialnumber 1.
BAMvlvol2 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSerial 2
TLMS-specific multi-volume chain serialnumber 2.
BAMvlvol3 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSerial 3
TLMS-specific multi-volume chain serialnumber 3.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
228 LCM Quick Reference • Revision 01 • E60155-01
BAMvlvol4 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSerial 4
TLMS-specific multi-volume chain serialnumber 4.
BAMvlvol5 char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volSerial 5
TLMS-specific multi-volume chain serialnumber 5.
BAOutsrv char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSOut of ServiceCode
TLMS-specific out of service code. ContainsBALoscde, BADamcde, and BADescde.
BARecsiz int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSLRECL
TLMS-specific logical record length.
BARederr int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSTemporaryRead Errors
TLMS-specific current temporary read errors.
BARfm char3none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRecordFormat
TLMS-specific record format.
BARtncnt1 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionCount - 1
TLMS-specific retention count for retentionentry 1.
BARtncnt2 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionCount - 2
TLMS-specific retention count for retentionentry 2.
BARtncnt3 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionCount - 3
TLMS-specific retention count for retentionentry 3.
BARtncnt4 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionCount - 4
TLMS-specific retention count for retentionentry 4.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 229
BARtncnt5 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionCount - 5
TLMS-specific retention count for retentionentry 5.
BARtncnt6 int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionCount - 6
TLMS-specific retention count for retentionentry 6.
BARtndev char4none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSCabinetSlot
TLMS-specific box or cabinet/slot.
BARtnLoc1 char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionLoc - 1
TLMS-specific user retention location forretention entry 1.
BARtnLoc2 char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionLoc - 2
TLMS-specific user retention location forretention entry 2.
BARtnLoc3 char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionLoc - 3
TLMS-specific user retention location forretention entry 3.
BARtnLoc4 char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionLoc - 4
TLMS-specific user retention location forretention entry 4.
BARtnLoc5 char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionLoc - 5
TLMS-specific user retention location forretention entry 5.
BARtnLoc6 char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionLoc - 6
TLMS-specific user retention location forretention entry 6.
BARtnptr char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionEntry
TLMS-specific offset of active retention entry.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
230 LCM Quick Reference • Revision 01 • E60155-01
BARtnsrc char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionSource
TLMS-specific retention source. ' ' (blank) = Noretention data; '1' = From RMF; '2' = From JCL;'3' = From manual update.
BARtntyp1 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionType - 1
TLMS-specific user retention type for retentionentry 1. '1' = Catalog control; '2' = Date control;'3' = Catalog and age; '4' = Cycle control; '5' =Age; '6' = Move immediate control; '7' =Manual control; '8' = Days since last used; '9' =Expiration date.
BARtntyp2 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionType - 2
TLMS-specific user retention type for retentionentry 2. '1' = Catalog control; '2' = Date control;'3' = Catalog and age; '4' = Cycle control; '5' =Age; '6' = Move immediate control; '7' =Manual control; '8' = Days since last used; '9' =Expiration date.
BARtntyp3 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionType - 3
TLMS-specific user retention type for retentionentry 3. '1' = Catalog control; '2' = Date control;'3' = Catalog and age; '4' = Cycle control; '5' =Age; '6' = Move immediate control; '7' =Manual control; '8' = Days since last used; '9' =Expiration date.
BARtntyp4 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionType - 4
TLMS-specific user retention type for retentionentry 4. '1' = Catalog control; '2' = Date control;'3' = Catalog and age; '4' = Cycle control; '5' =Age; '6' = Move immediate control; '7' =Manual control; '8' = Days since last used; '9' =Expiration date.
BARtntyp5 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionType - 5
TLMS-specific user retention type for retentionentry 5. '1' = Catalog control; '2' = Date control;'3' = Catalog and age; '4' = Cycle control; '5' =Age; '6' = Move immediate control; '7' =Manual control; '8' = Days since last used; '9' =Expiration date.
BARtntyp6 char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRetentionType - 6
TLMS-specific user retention type for retentionentry 6. '1' = Catalog control; '2' = Date control;'3' = Catalog and age; '4' = Cycle control; '5' =Age; '6' = Move immediate control; '7' =Manual control; '8' = Days since last used; '9' =Expiration date.
BAScrdat dateSee notes below.none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSScratchDate
TLMS-specific date volume scratched.
BAScruid char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSScratchedID
TLMS-specific scratched by ID. '1' = TRS; '2' =JCL; '3' = Manual; '4' = External data manager.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 231
BASmsmgt char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMgmtClass
TLMS-specific SMS management class
BASpcchn char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSSpecialChaining
TLMS-specific special chaining (chained formoves).
BASpnflg char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSSpannedFlag
TLMS-specific spanned data set flag (1=spanned).
BASrvscr char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSServ/ScrIndicator
TLMS-specific service/scratch indicator. '0' =Skipped segment record; '1' = In service/Nonscratch; '2' = In service/Scratch; '3' = Outservice/Non scratch; '4' = Out Service/Scratch.
BATaplen int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSTapeLength
TLMS-specific tape length.
BATapmod char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSRecordingTechnique
TLMS-specific track recording technique.
BATaptyp char2none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSTapeType
TLMS-specific tape type.
BATrspro char1none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSTRSProcessed
TLMS-specific TRS has processed this volume.
BAUnisrt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSSortUnique
TLMS-specific sort unique code.
BAUsebuy int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSUses SincePurchased
TLMS-specific uses since purchased.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
232 LCM Quick Reference • Revision 01 • E60155-01
BAUsecln int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSUses SinceCleaned
TLMS-specific uses since cleaned.
BAUsecrt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSUses SinceCertified
TLMS-specific uses since certified.
BAUsr001 char15none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSJobAccounting
TLMS-specific user data. (Defaults to jobaccounting - TCB).
BAUsr002 char15none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSProgrammerName
TLMS-specific user data. (Defaults toprogrammer name - TCB).
BAUsr003 char29none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSUserData
TLMS-specific user data area.
BAVender char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSManufacturerCode
TLMS-specific user updated manufacturercode.
BAVol1st char (alternate)8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-volFirst Ptr
TLMS-specific multi-volume first volumeserial number pointer.
BAVolcnt int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSVolumeCount
TLMS-specific volume count.
BAVollst char (alternate)8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSMulti-VolLast Ptr
TLMS-specific multi-volume last chain pointer.
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
E60155-01 • Revision 01 Chapter 3 233
BAVolown char8none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSVolumeOwner
TLMS-specific volume owner.
BAVolseq int5none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSVolumeSeq
TLMS-specific volume sequence number.
BAVolser char6none
ActionCustom MVC_VTVReportCustom VolumeReportMethod Assignment
TLMSVolumeSerial
TLMS-specific volume serial number
TABLE 3-11 Fields Specific to TMS TLM
Field
TypeSizeSummary Where Available Report Heading Description
234 LCM Quick Reference • Revision 01 • E60155-01
E60155-01 • Revision 01 Chapter 3 235
Valid Formats for Date/Time Fields
TABLE 3-12 Valid Formats for Date Fields
Type Size Example
yyddd 5 97248
ccyyddd 7 1997248
yy.ddd 6 97.248
ccyy.ddd 8 1997.248
mm/dd/yy 8 09/05/97
mm/dd/ccyy 10 09/05/1997
yy-mm-dd 8 97-09-05
yyyy-mm-dd 10 2000-09-05This is the default.
dd_mmm_yy 9 09 Sep 97
dd_mmm_ccyy 11 09 Sep 1997
ddmmmyy 7 09Sep98
ddmmmccyy 9 09Sep1997
textdate 18 September 9, 1997
textdaydate 29 Wednesday, September 10, 1997
TABLE 3-13 Valid Formats for Time Fields
Type Size Example
hh:mm 5 22:21
hh:mm:ss 8 22:21:32This is the default.
hh:mm:ss_pm 11 10:21:32 PM
236 LCM Quick Reference • Revision 01 • E60155-01