Missing internal flash memory and SD card does not mountup vote 3 down vote favorite

Some time ago I installed a custom firmware (YAR28) on my Archos 7HT. This worked fine for a while, until some day when I switched it on it showed the initial startup screen, and after that all my installed apps were gone. So I re-installed the stock firmware from Archos. But then I found out I could no longer access the sd-card. It was not mounted when I inserted it. But when I connected the device to my PC using USB it did show up as drive F: and G:. I could access F:, which was obviously my sd-card, but G: (which should be the internal flash) could not be accessed, and Windows even asked if this should be formatted.When I open the Files on my tablet, and select 'SD Card' it gives the 'SD card is unmounted' error. And when I select 'Internal Memory' it is completely empty. So it looks like the file system is still working, but the internal flash part somehow is no longer accessible.I have a feeling that some low level setting has changed and that I could somehow solve it if I could get access to the underlying Linux system, but I do not have a clue how to proceed.storage archos-gen8shareimprove this question

edited Mar 24 '13 at 12:02Izzy37.1k1463216

asked Feb 25 '12 at 14:32Cees Meijer13615

add comment1 Answeractive oldest votesup vote 2 down vote accepted

Indeed the internal filesystem somehow got damaged. To fix this you need access to the filesystem itself, which can be done using ADB. (Android Debugging Bridge) Instructions for connecting to the Archos Tablets using ADB can be found here:

http://www.archos.com/support/support_tech/updates_adb.html?country=er&lang=en

Although the description is complete this still sometimes can be hard. You might have to restart your computer a few times, but eventually it is possible.

Open a command window in the directory containing the ADB.exe program (it is in the 'platform-tools' directory under the androis-sdk-windows folder)Type:ADB SHELLIf the connection is OK, it will start a server and after e few seconds show the '$' prompt. this means you are connected to the tablet and have direct access to the linux shell. If you type 'ls' you will see a list of folders that contain the operating system and all supporting files that make your tablet work.Now navigate to the folder containing the Flash file system by typing:cd ./dev/block/voldIf you now type 'ls' again you should see three or four folders that have numbered names. One of them is '31:8'. This is the folder that points to the internal flash. Now we can fix our problem by recreating the MS-DOS (FAT32) file system on this partition. Type the following:mkdosfs -F 32 /dev/block/vold/31:8/

This will fix the FAT32 filesystem. Now leave the shell by typing 'exit', disconnect the USB and restart your tablet. On my system this made internal storage re-appear, and after that it also mounted the sd-card. Problem solved.

Many thanks to this post on SlateDroid that contained the answer.