storage of wire ropes
1
1 STORAGE On receiving the wire rope check the identification and certification along with the rope & reel condition. Rope should be kept in such a way such that it has no contact with the ground.(Ex: should be kept on cemented floor or on stands) Rope should be kept covered at all times with a protective covering which allows ample ventilation inside it. If rope is supplied with heavy lubrication or stored in warm temperatures for a long period of time, it is advisable to rotate the reel for about 90⁰ every 2 months. Ensure that the rope is stored where it is not likely to get effected by chemical fumes, steam high temperatures or other corrosive agents. It is recommended to always follow First in First Out system while managing wire rope inventory. All details like location, rope identification number, date of entry into the store etc should be maintained in proper records. Handling the rope with forklifts or other equipments should be done carefully avoiding any damage to rope surface.
description
Guidelines for Handling and Storing a Steel Wire Rope
Transcript of storage of wire ropes
1 STORAGE
On receiving the wire rope check the identification and certification along with the rope & reel condition.
Rope should be kept in such a way such that it has no contact with the ground.(Ex: should be kept on cemented floor or on stands)
Rope should be kept covered at all times with a protective covering which allows ample ventilation inside it.
If rope is supplied with heavy lubrication or stored in warm temperatures for a long period of time, it is advisable to rotate the reel for about 90⁰ every 2 months.
Ensure that the rope is stored where it is not likely to get effected by chemical fumes, steam high temperatures or other corrosive agents.
It is recommended to always follow First in First Out system while managing wire rope inventory.
All details like location, rope identification number, date of entry into the store etc should be maintained in proper records.
Handling the rope with forklifts or other equipments should be done carefully avoiding any damage to rope surface.
