Steps on the Road to Predictive Medicine Richard Simon, D.Sc. Chief, Biometric Research Branch...

Steps on the Road to Predictive Medicine

Richard Simon, D.Sc.Chief, Biometric Research Branch

National Cancer Institutehttp://brb.nci.nih.gov

BRB Websitebrb.nci.nih.gov

• Powerpoint presentations

• Reprints & Presentations Reports

• BRB-ArrayTools software

• Web based Sample Size Planning – Clinical Trials using predictive biomarkers– Development of gene expression based

predictive classifiers

• Many cancer treatments benefit only a minority of patients to whom they are administered– Particularly true for molecularly targeted drugs

• Being able to predict which patients are likely to benefit would – save patients from unnecessary toxicity, and enhance

their chance of receiving a drug that helps them– Help control medical costs – Improve the success rate of clinical drug development

Biomarkers

• Prognostic– Measured before treatment to indicate long-

term outcome for patients untreated or receiving standard treatment

• Predictive– Measured before treatment to select good

patient candidates for a particular treatment

Prognostic and Predictive Biomarkers in Oncology

• Single gene or protein measurement– HER2 protein staining 2+ or 3+– HER2 amplification– KRAS mutation

• Index or classifier that summarizes contributions of multiple genes/proteins– Empirically determined based on genome-

wide correlating gene expression to patient outcome after treatment

Prospective Co-Development of Drugs and Companion Diagnostics

1. Develop a completely specified genomic classifier of the patients likely to benefit from a new drug

2. Establish analytical validity of the test

3. Design a pivotal RCT evaluating the new treatment with sample size, eligibility, and analysis plan prospectively based on use of the completely specified classifier/test.

Guiding Principle

• The data used to develop the classifier must be distinct from the data used to test hypotheses about treatment effect in subsets determined by the classifier– Developmental studies can be exploratory– Studies on which treatment effectiveness

claims are to be based should be definitive studies that test a treatment hypothesis in a patient population completely pre-specified by the classifier

New Drug Developmental Strategy I

• Restrict entry to the phase III trial based on the binary predictive classifier, i.e. targeted design

Using phase II data, develop predictor of response to new drugDevelop Predictor of Response to New Drug

Patient Predicted Responsive

New Drug Control

Patient Predicted Non-Responsive

Off Study

Applicability of Design I

• Primarily for settings where the classifier is based on a single gene whose protein product is the target of the drug– eg Herceptin

• With substantial biological basis for the classifier, it may be unacceptable ethically to expose classifier negative patients to the new drug

• Strong biological rationale or phase II data on unselected patients needed for approval of test

Evaluating the Efficiency of Strategy (I)

• Simon R and Maitnourim A. Evaluating the efficiency of targeted designs for randomized clinical trials. Clinical Cancer Research 10:6759-63, 2004; Correction and supplement 12:3229, 2006

• Maitnourim A and Simon R. On the efficiency of targeted clinical trials. Statistics in Medicine 24:329-339, 2005

Web Based Software for Comparing Sample Size

Requirements

• http://brb.nci.nih.gov

Developmental Strategy (II)

Develop Predictor of Response to New Rx

Predicted Non-responsive to New Rx

Predicted ResponsiveTo New Rx

ControlNew RX Control

New RX

Developmental Strategy (II)

• Do not use the test to restrict eligibility, but to structure a prospective analysis plan

• Having a prospective analysis plan is essential• “Stratifying” (balancing) the randomization is useful to

ensure that all randomized patients have tissue available but is not a substitute for a prospective analysis plan

• The purpose of the study is to evaluate the new treatment overall and for the pre-defined subsets; not to modify or refine the classifier

• The purpose is not to demonstrate that repeating the classifier development process on independent data results in the same classifier

• R Simon. Using genomics in clinical trial design, Clinical Cancer Research 14:5984-93, 2008

• R Simon. Designs and adaptive analysis plans for pivotal clinical trials of therapeutics and companion diagnostics, Expert Opinion in Medical Diagnostics 2:721-29, 2008

Analysis Plan B

• Compare the new drug to the control overall for all patients ignoring the classifier.– If poverall 0.03 claim effectiveness for the eligible

population as a whole

• Otherwise perform a single subset analysis evaluating the new drug in the classifier + patients– If psubset 0.02 claim effectiveness for the classifier +

patients.

• This analysis strategy is designed to not penalize sponsors for having developed a classifier

• It provides sponsors with an incentive to develop genomic classifiers

Sample size for Analysis Plan B

• To have 90% power for detecting uniform 33% reduction in overall hazard at 3% two-sided level requires 297 events (instead of 263 for similar power at 5% level)

• If 25% of patients are positive, then when there are 297 total events there will be approximately 75 events in positive patients – 75 events provides 75% power for detecting 50%

reduction in hazard at 2% two-sided significance level – By delaying evaluation in test positive patients, 80%

power is achieved with 84 events and 90% power with 109 events

Analysis Plan C

• Test for interaction between treatment effect in test positive patients and treatment effect in test negative patients

• If interaction is significant at level int then compare treatments separately for test positive patients and test negative patients

• Otherwise, compare treatments overall

Sample Size Planning for Analysis Plan C

• 88 events in classifier + patients needed to detect 50% reduction in hazard at 5% two-sided significance level with 90% power

• If test is predictive but not prognostic, and if 25% of patients are positive, then when there are 88 events in positive patients there will be about 264 events in negative patients– 264 events provides 90% power for detecting 33%

reduction in hazard at 5% two-sided significance level

Simulation Results for Analysis Plan C

• Using int=0.10, the interaction test has power 93.7% when there is a 50% reduction in hazard in test positive patients and no treatment effect in test negative patients

• A significant interaction and significant treatment effect in test positive patients is obtained in 88% of cases under the above conditions

• If the treatment reduces hazard by 33% uniformly, the interaction test is negative and the overall test is significant in 87% of cases

Biomarker Adaptive Threshold Design

Wenyu Jiang, Boris Freidlin & Richard Simon

JNCI 99:1036-43, 2007

Biomarker Adaptive Threshold Design

• Randomized trial of T vs C

• Have identified a univariate biomarker index B thought to be predictive of patients likely to benefit from T relative to C

• Eligibility not restricted by biomarker

• No threshold for biomarker determined

• Biomarker value scaled to range (0,1)

• Time-to-event data

Procedure A

• Compare T vs C for all patients– If results are significant at level .04 claim

broad effectiveness of T– Otherwise proceed as follows

Procedure A

• Test T vs C restricted to patients with biomarker B > b – Let S(b) be log likelihood ratio statistic

• Repeat for all values of b• Let S* = max{S(b)}• Compute null distribution of S* by permuting

treatment labels• If the data value of S* is significant at 0.01 level,

then claim effectiveness of T for a patient subset• Compute point and interval estimates of the

threshold b

Procedure B

• S(b)=log likelihood ratio statistic for treatment effect in subset of patients with Bb

• S*=max{S(0)+R, max{S(b)}}• Compute null distribution of T by permuting

treatment labels• If the data value of T is significant at 0.05 level,

then reject null hypothesis that T is ineffective • Compute point and interval estimates of the

threshold b

0

*

*

log ( ) log ( ) ( ) ( )

binary treatment indicator

( , , , ) log partial likelihood

( ) max ( , , , )

b̂=argmax{l(b)}

ˆ ˆb value for bootstrap sample of cases

ˆ empirical distribution o

h t h t I B b I B b

l b

l b l b

b

F

*

*

*

ˆf b

ˆ for b based on percentiles of

ˆ ( ) probability patient with biomarker value B will benefit

from treatment with E rather than C

CI F

F B

Estimation of Threshold

Prostate Cancer Data

Covariate # patients with measured covariate

Overall Test

p value

Procedure A

Stage 2

p value

Procedure B

p value

AP 505 .084 .019 .041

SG 494 .110 .025 .050

Prostate Cancer Data

Covariate # patients with measured covariate

Estimated Threshold

95% CI 80% CI

AP 505 36 (9,170) (25,108)

SG 494 11 (10,13) (11,11)

Sample Size Planning (A)

• Standard broad eligibility trial is sized for 80% power to detect reduction in hazard D at significance level 5%

• Biomarker adaptive threshold design is sized for 80% power to detect same reduction in hazard D at significance level 4% for overall analysis

Estimated Power of Broad Eligibility Design (n=386 events) vs Adaptive Design A (n=412 events) 80% power for 30% hazard reduction

Model Broad Eligibility

Design

Biomarker Adaptive

Threshold A40% reduction in 50% of

patients

(22% overall reduction)

.70 .78

60% reduction in 25% of patients


.65 .91

79% reduction in 10% of patients


.35 .93

Sample Size Planning (B)

• Estimate power of procedure B relative to standard broad eligibility trial based on Table 1 for the row corresponding to the expected proportion of sensitive patients ( ) and the target hazard ratio for sensitive patients– e.g. =25% and =.4 gives RE=.429/.641=.67

• When B has power 80%, overall test has power 80*.67=53%

• Use formula B.2 to determine the approximate number of events needed for overall test to have power 53% for detecting =.4 limited to =25% of patients

Events needed to Detect Hazard Ratio With Proportional Hazards

2

1 14log

z zD

Events (D’) Needed for Overall Test to Detect Hazard Ratio

Limited to Fraction

2' /D D

Example Sample Size Planning for Procedure B

• Design a trial to detect =0.4 (60% reduction) limited to =25% of patients– Relative efficiency from Table 1 .429/.641=.67

• When procedure B has power 80%, standard test has power 80%*.67=53%

• Formula B.2 gives D’=230 events to have 53% power for overall test and thus approximate 80% power for B

• Overall test needs D=472 events for 80% power for detecting the diluted treatment effect

Adaptive Signature Design

Boris Freidlin and Richard SimonClinical Cancer Research 11:7872-8, 2005

Adaptive Signature DesignEnd of Trial Analysis

• Compare T to C for all patients at significance level overall

– If overall H0 is rejected, then claim effectiveness of T for eligible patients

– Otherwise

• Otherwise:– Using only the first half of patients accrued during the

trial, develop a binary classifier that predicts the subset of patients most likely to benefit from the new treatment T compared to control C

– Compare T to C for patients accrued in second stage who are predicted responsive to E based on classifier

• Perform test at significance level 0.05 - overall

• If H0 is rejected, claim effectiveness of T for subset defined by classifier

* * *1log ( ,..., )

1i

i i i iKi

pt t x x

p

True Model

Classifier Development

• Using data from stage 1 patients, fit all single gene logistic models (j=1,…,M)

• Select genes with interaction significant at level

log ( )i j i j ij j i ijit p t x t x

Classification of Stage 2 Patients

• For i’th stage 2 patient, selected gene j votes to classify patient as preferentially sensitive to T if

ˆ ˆexp j j ijx R

Classification of Stage 2 Patients

• Classify i’th stage 2 patient as differentially sensitive to T relative to C if at least G selected genes vote for differential sensitivity of that patient

Simulation Parameters

• Gene expression levels of sensitivity genes MVN – mean m, variance v1 and correlation r in

sensitive patients

– mean 0, variance v2 and correlation r in non-sensitive patients

• Gene expression levels of other genes MVN with mean 0, variance v0 and correlation r in all patients

• Treatment-expression interaction parameters (*) same for all sensitivity genes

* value scaled (depending on K) so that log odds ratio of treatment effect is 5 for hypothetical patient with sensitivity gene expression levels at their expected values– i.e. m *K=5

• Intercept scaled for control response rate of 25%

Treatment effect restricted to subset.10% of patients sensitive, 10 sensitivity genes, 10,000 genes, 400

patients.

Test Power

Overall .05 level test 46.7


Sensitive subset .01 level test(performed only when overall .04 level test is negative)

42.2

Overall adaptive signature design 85.3

Treatment effect restricted to subset.25% of patients sensitive, 10 sensitivity genes, 10,000 genes, 400

patients.

Test Power



Sensitive subset .01 level test(performed only when overall .04 level test is negative)

99.7


Overall treatment effect, no subset effect.10% of patients sensitive, 10 sensitivity genes, 10,000 genes, 400

patients.

Test Power



Sensitive subset .01 level test 1.0


Stronger treatment effect for sensitive subset.10% of patients sensitive, 10 sensitivity genes, 10,000 genes, 400

patients.

Test Power



Sensitive subset .01 level test 45.6


Empirical PowerRR for Control Patients 25%

Response Rate in

Sensitive Subset

Overall .05 Overall .04 Subset .01 Overall Adaptive

98% 49.5 45.4 75.8 85.7

95% 43.0 38.5 63.1 75.0

87% 36.7 31.7 34.5 51.6

80% 31.6 28.4 17.6 38.8

71% 26.0 22.6 6.3 26.3

Cross-Validated Adaptive Signature Design

Wenyu Jiang, Boris Freidlin, Richard Simon

Cross-Validated Adaptive Signature Design

End of Trial Analysis

• Compare T to C for all patients at significance level overall

– If overall H0 is rejected, then claim effectiveness of T for eligible patients

– Otherwise

• Otherwise:– Partition the full data set into K parts– Form a training set by omitting one of the K parts. The omitted part is

the test set• Using the training set, develop a predictive classifier of the subset of patients

who benefit preferentially from the new treatment T compared to control C using the methods developed for the ASD

• Classify the patients in the test set as either sensitive or not sensitive to T relative to C

– Repeat this procedure K times, leaving out a different part each time• After this is completed, all patients in the full dataset are classified as

sensitive or insensitive– Compare T to C for sensitive patients by computing a test statistic S e.g.

the difference in response proportions– Generate the null distribution of S by permuting the treatment labels and

repeating the entire K-fold cross-validation proceedure – Perform test at significance level 0.05 - overall

– If H0 is rejected, claim effectiveness of E for subset defined by classifier• The sensitive subset is determined by developing a classifier using the full

dataset

80% Response to T in Sensitive Patients25% Response to T or C Otherwise

10% Patients SensitiveASD CV-ASD

Overall 0.05 Test 0.223 0.240

Overall 0.04 Test 0.198 0.209

Sensitive Subset 0.01 Test

0.205 0.661

Overall Power 0.351 0.714



Overall 0.05 Test 0.486 0.503

Overall 0.04 Test 0.452 0.471


0.207 0.588




Overall 0.05 Test 0.830 0.838

Overall 0.04 Test 0.794 0.808


0.306 0.723


35% Response to T 25% Response to C

No Subset EffectASD CV-ASD

Overall 0.05 Test 0.586 0.594

Overall 0.04 Test 0.546 0.554


0.009 0


25% Response to T 25% Response to C

No Subset EffectASD CV-ASD

Overall 0.05 Test 0.047 0.056

Overall 0.04 Test 0.04 0.048


0.001 0


Steps on the Road to Predictive Medicine Richard Simon, D.Sc. Chief, Biometric Research Branch...

Documents

Transcript of Steps on the Road to Predictive Medicine Richard Simon, D.Sc. Chief, Biometric Research Branch...