STEP MANAGEMENT OVERVIEW CURRENT STATUS OF STEP Module 5 Estimated Viewing Time: 30 Minutes.
-
Upload
phyllis-gaines -
Category
Documents
-
view
216 -
download
1
Transcript of STEP MANAGEMENT OVERVIEW CURRENT STATUS OF STEP Module 5 Estimated Viewing Time: 30 Minutes.
STEP MANAGEMENT OVERVIEW
CURRENT STATUS OF STEP
Module 5
Estimated Viewing Time: 30 Minutes
Sponsored BySponsored By
The NationalThe National Institute of Standards & TechnologyInstitute of Standards & Technology
Developed Under Contract by:
Product Data Integration Technologies, Inc.
100 W. Broadway, Suite 540
Long Beach, CA 90802
NIST/ECRC
Topics for This Module
STEP Current Development Status This section describes the availability of STEP
resources and Application Protocols for use by industry.
STEP Current Implementation Status This section describes the state of industry
implementation of STEP and the availability of supporting development and implementation tools.
NIST/ECRC
STEP Current Development Status
NIST/ECRC
When is STEP available?
Basic STEP capability has been available since December 1994. 12 Parts registered as ISO 10303 international standards in
December 1994. This is the “Initial Release”. This includes 2 AP’s (Part 201) address the exchange of 2D
drawing data and (Part 203) 3D design data under configuration control and included in the 12 parts.
Continuing STEP development schedule is aggressive (as of 1/1/96) 10 AP’s are in different stages of ballot cycle to be
standardized. 7 additional APs have industrial validation and 3 of them are
technically complete. 11 new APs have been approved as active development
projects.
NIST/ECRC
STEP Development Industry-Specific Views (1 of 2)
Discrete Manufacturing Product Design Configuration Management Core Data for Automobile Industry CAD System Shape Geometry for Mechanical Product
Design Engineering Drawing Information Manufacturing Technologies: Composites, NC Process
Planning, Casting, Forging
Electrical and Electronics PCA, PCB and Component Design Electronic Test Diagnostic and Remanufacture Electrotechnical Plant Design and Installation
NIST/ECRC
Architecture and Construction Building Element Shape Design Ship Building Building Construction Core Model Building Services: Heating, Ventilation and AC Building Structural Frame: Steelwork
Process Plants Plant Spatial Configuration Plant Functional Design Process Engineering
STEP Development Industry-Specific Views (2 of 2)
NIST/ECRC
AP Current Development Status (as of 1 Jan 1996)
Sta
nd
ard
ize
Sp
ecif
icat
ion
Req
uir
emen
ts
AAM
ARM
AIM
IS
DIS
CD
20
1 20
2 20
3 20
4 20
5 20
7 20
8 20
9 21
0 21
1 21
2 21
3 21
4 21
5 21
6 21
7 21
8 22
0 22
1 22
2 22
3 22
4 22
5 22
6 22
7 22
8 22
9 23
0 23
1
STEP CURRENT IMPLEMENTATION
STATUS
NIST/ECRC
STEP Usage and Implementation
Many companies are experimenting with various implementations, several are at the pilot or production usage stage.
Some commercial CAD vendor translators are available, with many more are under development: UNIGRAPHICS, CATIA, ProEngineer.
Many commercial software toolkits are available for development, STEP browsing, and implementation.
Training and consulting services are commercially available for STEP development and implementation.
NIST/ECRC
Current Implementation Status
Example Application Protocol Prototype, Demo,
and Pilot Development Projects in the U.S.
AEROSTEP: AP203 (Boeing, GE)
AWS: AP203 (IBM, Lockheed, NG)
GM/EDS Prototype: AP207 (GM/EDS)
PAS-C: AP209 (Lockheed, Vought, Boeing)
PAP-E: AP211 (Intermetrics, TRW, WH)
PDXI: AP 231 (Chevron, DuPont, and others)
PlantSTEP: AP 227 (The top 10 Plant Design Vendors)
PREAMP: AP210,AP 220 (Hughes, MMA, Rockwell, Boeing)
RASP: AP210 (Ford, UTC, Hughes, MMA, TI)
PEP: AP201 and 203 (DoD Joint Center - FCIM/IPDE)
RAMP: AP224 (Grumman)
NIST/ECRC
STEP Centers
PDES, Inc. - US, UK aerospace/automobilePROSTEP - Germany automobileJapan STEP Center - JapanC-STEP - ChinaPISTEP - UK processPlantSTEP - US and Japan process ind.PDXI - US and Europe process ind.Nat’l PDES Testbed - USGOSET - FranceSTEP Data Ex. Ctr. - Australia
Examples of established centers to accelerate the development and implementation of STEP:
NIST/ECRC
STEP Production Software Tools -- (1 of 2)
ORGANIZATION SOFTWARE TOOLS
Cadlab ICE Toolset
Canonical ExWare
CIMIO EXPRESS-M schema mapping
CSTB SPDI Station
DCM DCMem
DEC DECexpress
EPM EDM
Erlangen fedex
Fraunhofer-IGD Xpresso
as of 1/1//96
NIST/ECRC
ORGANIZATION SOFTWARE TOOLS
GE EDEX - EDitor for EXpress
GIDA EXEP Tool Kit
GOPAS ExpressLab
IDA Pstep-CaseLib
ITI(OH) PDE/Lib
NIST NIST STEP Toolset
PDIT FirstSTEP Toolkit
Siemens EXPREME
STEP Tools ST- Toolkit
Theorem AP203 browser, editor, viewer
Versant EXPRESS/STEP
STEP Production Software Tools -- (2 of 2)
as of 1/1//96
NIST/ECRC
Legend
Implementing STEP
No current commitments
Leading CAD/CAM HW & SW MfgrsRanked by 1992 Market Share
Source: Electronic Business, April 93, p 75
Unknown
IBM
Intergraph
Computervision
Cadence Designer Sys,
Autodesk
Mentor Graphics
Hewlett Packard
NIST/ECRC
CAD/CAM Sector's Top 10 in 1994Software Revenue Totaled $4.1B
Hausman, Eric, "CAD/CAM Sector's Top 10," Computer Reseller News, Dec 5, 1994
Autodesk
IBM
IntergraphCadence
Design Sys.
Computervision
Parametric
EDS Unigraphics
SDRC
Mentor Graphics
Synopsys
Unknown
Legend
Implementing STEPNo current
commitments
NIST/ECRC
CAD/CAM/CAE Software MarketProjected Revenue of Top 7 - 1995
Percentages based on $4.6B total market projection.Source: Computer Reseller News, April 10, 95, n625, p 47(1)
Unknown
Autodesk
IBM/Dassault SystemsIntergraph
ParametricTech
Computervision
Synopsys Inc.
Struct. Dynamics
Legend
Implementing STEP
No current commitments
NIST/ECRC
Plant Design CAD Software Vendors
Inte
rgra
ph
CA
DC
entr
e
EA
Sys
tem
s
Das
sau
lt(C
AT
IA)
$0
$5
$10
$15
$20
Mill
ion
$ R
eve
nue
Inte
rgra
ph
CA
DC
entr
e
EA
Sys
tem
s
Das
sau
lt(C
AT
IA)
Com
put
erv
isio
n
Top Five Vendors (and the next three as well) are all implementing STEP.
Source: DARATECH 1995 estimates
NIST/ECRC
CURRENT STATUS OF STEP
End of Module 5