STEP 1: Identify and Research A Need STEP 3: Make A Prototype STEP 2: Develop Possible Solutions...
-
Upload
colleen-bryant -
Category
Documents
-
view
229 -
download
10
Transcript of STEP 1: Identify and Research A Need STEP 3: Make A Prototype STEP 2: Develop Possible Solutions...
STEP 1: Identify and
Research A Need
STEP 3:Make A
Prototype
STEP 2:Develop Possible
Solutions
STEP 4:Test and Evaluate
STEP 5: Modify and
Retest
Bell Work SPI 0807.T/E.1 to 2Engineering Design Process
Feb 06, 2013
1) A game company is working on a new computer game. Their programmers are now writing the software. What engineeringdesign process (EDP) step is this?2) After the software is written, they will hire gamers to play itlooking for errors in the software. What EDP step will that be?
1
1) Discuss objective and bell work 2) Ask about birthdays 3) Complete EDP activity using the Lego kits See next slide for more details4) COPY IN YOUR AGENDA: No Homework:
PLAN
2
Silly Thought I have a twin brother;
he's identical, but I'm not.
SPI 0807.T/E.1 to 2Engineering Design Process
Mission: Use the EDP and a Lego kit to design and build twomotorized devices.
Need: build a motorized toy car with 4 wheels that can drive up aninclined board at 3 different heights. 1st height: 6 inches, 2nd height: 8 inches, 3rd height: 10 inches
Solutions: Use the provided Lego kit booklet 9686-B,
Prototype: Follow the 13 instructions shown in plan 11B
Test the car on the board at 3 different heights. Record your results!
Change the wheels and test the car again in the same manner
Activity
3
SPI 0807.T/E.1 to 2Engineering Design Process
STEP 1: Identify and Research A Need
STEP 2: Develop Possible Solutions
STEP 3:Make A Prototype
STEP 4:Test and Evaluate
STEP 5: Modify and Retest
(Time Permitting): Go ahead & build plan 12B. Then test it the same way.