Steelsucker rods& pony rodsRod Lift Solutions

2

Norris standard:The benchmark for sucker rods

As a world-class leader in sucker rod technologies, the name Norris is synonymous with rod lift. Since 1882, we have set the standard for rods and accessories that incorporate long-lasting materials, stringent manufacturing processes, the highest quality control, and optimized designs. With Norris sucker rods, wells produce at optimum levels longer. For improving ROI, there’s no better choice.

We are constantly striving to develop new products that can carry on a legacy of innovation. Our highly experienced Technical Services team consists of subject matter experts that are capable of providing reliable guidance from the drawing board to the final product installation. Norris stands behind every product that it sells.

Innovative design, unbeatable performance,unmatched valueOur brands are deeply committed to delivering leading-edge technologies with superior quality, world-class manufacturing and unsurpassed support. Each brand brings results in optimized production rates and life-cycle costs for oil-and-gas producers around the globe.

Norris

We guarantee that if any newly manufacturedNorris product fails to comply with API Specification 11B, Norris will replace it at no cost to the customer. A detailed explanation of our Zero Defects Guarantee may be found on our website, www.apergyals.com.

INCREASED OPERATIONAL PROFITOur rods are built with the customer’s bottom line in mind. Quality Norris rods drastically reduce the need for rod replacement, well downtimes and maintenance.

ENHANCED ROD LIFENorris’s unique NOR-PEENING® process greatly enhances rod strength and corrosion tolerance.

LOWEST TOTAL COST OF OWNERSHIPDesigned to significantly outlast any other rods on the market, Norris rods provide the greatest lifetime value available in the industry today.

$

3

Sucker rods and pony rods

Norris steel sucker rods & pony rods

Norris Steel Sucker Rods are manufactured from micro-alloyed, modified special quality hot rolled carbon or alloy steel. Bar and sucker rod dimensions and tolerances conform to API Specification 11B, latest edition, and AISI Steel Products Manual.

All rods are straightened and inspected by Eddy Current for surface defects. Both ends are upset by automatic high-speed hot forging. Rods are full length normalized to relieve residual stresses. Air-quenched and tempered to refine and homogenize grain structure then, any remaining scale is finally removed during the NOR-PEENING® process. Upset pin blanks are machined and dimensions gauged. Pin threads are cold-formed to strengthen the thread from fatigue. An inhibitor-lubricant is applied to each pin and thread protector installed. An oil soluble coating protects Norris rods from atmospheric corrosion in storage. All

rods are bundled to prevent handling damage during transportation to the well site. Quality control inspections are performed at each step of the manufacturing process.

Norris Pony Rods are manufactured to the same chemical and physical properties, dimensions, tolerances and rod body diameters as Norris rods. Pony rods are available in 2 ft. (0,61 m), 4 ft. (1,22 m), 6 ft. (1,83 m), 8 ft. (2,44 m) and 10 ft. (3,05 m) lengths, depending on size and grade. Other lengths are available on special order.

Sucker rods are available in 5/8 inch (15,88 mm), 3/4 inch (19,05 mm), 7/8 inch (22,23 mm), 1 inch (25,4 mm), 1-1/8 inch (25,58 mm) and 1-1/4 inch (31,75 mm) rod body diameters and in both 25 ft. (7,62 m) and 30 ft. (9,144 m) lengths, depending on size and grade.

30 40 54 78 75/90 96 97

White Blue Brown Orange Green PurpleBody6-Point Pin End Socket

5/8”(15,88 mm)

3/4”(19,05 mm)

1”(25,4 mm)

7/8” (22,23 mm)

1-1/8” (28, 58 mm)

1-1/4”(31, 75 mm)

1-3/16”

1-7/16”

1-3/8”

1-3/4”

1-7/8”

1-7/8”

= Standard Availability = Special Order

4

Selection guide

Norris

30TYPE

40TYPE

API GRADE

STEEL SERIES

APPLICATIONDesigned for reciprocating lift applications in shallow-to-medium depth wells, the Type 30 is heat-treated to maximize its fatigue resistance and improve its performance in non-corrosive or effectively inhibited corrosive fluids.

AISI C-1541-M Carbon Steel

C

78TYPE

54TYPE

API GRADE

STEEL SERIES

APPLICATIONDesigned for reciprocating lift applications in shallow-to-medium depth wells, the Type 40 is alloyed and effectively heat-treated to maximize its fatigue resistance and improve its corrosion tolerance in effectively inhibited corrosive fluids.

AISI A-4621-M Nickel-Chromium-MolybdenumAlloy Steel

K

API GRADE

STEEL SERIES

APPLICATIONDesigned for reciprocating lift applications at any depth not exceeding the maximum allowable stress rating, the Type 78 is alloyed and effectively heat-treated to maximize its fatigue resistance and improve its performance in non-corrosive or effectively inhibited corrosive fluids. The Type 78 grade is recommended in Progressing Cavity Pump (PCP) applications.

AISI A-4142-M Chromium-Molybdenum Alloy Steel

D AlloyAPI GRADE

STEEL SERIES

APPLICATIONDesigned for reciprocating lift applications at any depth not exceeding the maximum allowable stress rating, the Type 54 is effectively heat-treated to maximize its fatigue resistance and improve its performance in non-corrosive or effectively inhibited corrosive fluids. The Type 54 grade can be utilized in some Progressing Cavity Pump (PCP) applications.

AISI C-1541-M Carbon Steel

D Carbon

5

Sucker Rods and Pony Rods

90TYPE

75TYPE

96TYPE

97TYPE

API GRADE

STEEL SERIES

APPLICATIONDesigned for reciprocating lift applications at any depth not exceeding the maximum allowable stress rating, the Type 90 is alloyed and effectively heat-treated to maximize its fatigue resistance and improve its corrosion tolerance in effectively inhibited corrosive fluids. The Type 90 grade is ideally suited for some Progressing Cavity Pump (PCP) applications.

AISI A-4320-M Nickel-Chromium-MolybdenumAlloy Steel

D Special

API GRADE

STEEL SERIES

APPLICATIONDesigned for heavy load reciprocating lift applicationsat any depth not exceeding the maximum allowable stress rating, the Type 96 is alloyed and effectively heat-treated to maximize its fatigue resistance and improve itsperformance in non-corrosive or effectively inhibited corrosive fluids. The Type 96 grade can be utilized in some Progressing Cavity Pump (PCP) applications.

AISI A-4138-M Chromium-Molybdenum Alloy Steel

High Strength Alloy API GRADE

STEEL SERIES

APPLICATIONDesigned for extremely heavy load reciprocating lift applications at any depth not exceeding the maximum allowable stress rating, the Type 97 is alloyed and effectively heat-treated to maximize its fatigue resistance and improve its corrosion tolerance in effectively inhibited corrosive fluids. The Type 97 grade can be utilized in some Progressing Cavity Pump (PCP) applications

AISI A-4330-M Nickel-Chromium-MolybdenumAlloy Steel

Special Service High Strength

API GRADE

STEEL SERIES

APPLICATIONDesigned for reciprocating lift applications at any depth not exceeding the maximum allowable stress rating, the Type 75 is alloyed and effectively heat-treated to maximize its fatigue resistance and improve its corrosion tolerance in effectively inhibited corrosive fluids. The Type 75 grade is ideally suited for and recommended in Progressing Cavity Pump (PCP) applications.

AISI A-4330-M Nickel-Chromium-MolybdenumAlloy Steel

D Special

6

Norris

Norris sucker rod selection chart

1 Tensile strength and yield strength values are the only steel sucker rod and pony rod physical requirements in API Specification 11B. All other physical properties are expected values only and

may deviate from the listed values shown above. 2 Numerals (in brackets) are HRC values not ordinarily used but are shown here for comparative reference purposes only.

Type

AISI Series

API Grade

Chemical Properties %

Physical PropertiesAs Normalized & Tempered

(Al)Aluminum

(C)Carbon

(Cr)Chromium

(Cu)Copper

(Mn)Manganese

(Mo)Molybdenum

(Ni)Nickel

(Nb)Niobium (Columbium)

(P)Phosphorus

(Si)Silicon

(S)Sulfur

(V)Vanadium

Tensile

ksi

Mpa

Yield, 2% Offset

ksi

Mpa

Elongation, 8”

Reduction, %

Hardness, HRC

30 40 54 75 78 90 96 97

30 40 54 75 78 90 96 97

30 40 54 75 78 90 96 97

C-1541-VM A-4623-M C-1541-VM A-4330-M A-4142-M A-4320-M A-4138-M A-4330-M

C K D Carbon D Special D Alloy D Special HA Alloy HS Special

- - 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max.

0.40/0.44 0.20/0.25 0.36/0.45 0.30/0.34 0.38/0.45 0.18/0.24 0.36/0.45 0.28/0.35

0.20 Max. 0.20 Max. 0.30 Max. 0.80/1.00 0.80/1.10 0.70/0.90 0.52/0.88 0.70/1.00

0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max. 0.35 Max.

1.40/1.60 0.60/0.80 1.35/1.65 0.80/1.00 0.80/1.00 0.80/1.00 0.88/1.52 0.70/1.00

0.06 Max. 0.15/0.25 0.06 Max. 0.20/0.30 0.15/0.25 0.20/0.30 0.25/0.35 0.20/0.30

0.25 Max. 1.85/2.00 0.35 Max. 1.65/2.00 0.45 Max. 1.15/1.50 0.30 Max. 1.65/2.00

- - - - - - 0.02/0.045 -

0.04 Max. 0.035 Max. 0.04 Max. 0.035 Max 0.035 Max. 0.025 Max. 0.035 0.035 Max

0.15/0.35 0.15/0.35 0.15/0.35 0.15/0.35 0.15/0.35 0.15/0.35 0.20/0.35 0.15/0.35

0.040 Max 0.035 0.04 Max 0.04 Max 0.035 Max. 0.025 Max. 0.04 Max. 0.04 Max

0.05/0.07 0.05/0.07 0.04/0.09 0.04/0.09 0.02/0.07 0.04/0.09 0.04/0.09 0.04/0.09

90/115 90/115 115/140 125/140 120/140 120/140 140/150 140/150

621/793 621/793 793/965 861/965 827/965 827/965 965/1034 965/1034

60 Min. 60 Min. 85 Min. 100 Min. 95 Min. 95 Min. 115 Min 115 Min

414 Min 414 Min. 586 Min. 689 Min. 655 Min. 655 Min. 793 Min 793 Min.

13 Min. 16 Min 15 Min. 10 Min. 10 Min. 10 Min. 10 Min 10 Min

40 Min. 55 Min. 50 Min. 45 Min. 45 Min. 45 Min. 45 Min. 45 Min.

(9)2/23 (9)2/23 22/30 23/31 23/31 23/31 30/34 30/34

1

7

Sucker Rods and Pony Rods

Proven brands. Proven performance.Apergy’s Rod Lift Solutions unites four of the industry’s iconic brands. All are deeply committed to delivering leading-edge technologies, superior quality, world-class manufacturing, and unsurpassed technical and customer support that results in optimized production rates and life-cycle costs for oil-and-gas producers around the globe.

Norris products and services are available in the following locations:

Unsurpassed customer supportOur relationship with the oilfield operator does not end when our sucker rod products enter the wellbore. In fact, that relationship will continue to grow over the product’s complete life-cycle, with our highly trained Technical Service and Sales staffs just a phone call or email away should you require any assistance, from system design to troubleshooting to completing a product’s delivery and installation.

HeadquartersTulsa, OK.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 918.445.7600

CaliforniaShafter, CA . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 251.866.7099

InternationalTulsa, OK.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 1.800.GET.RODS

New MexicoHobbs, NM . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 575.393.7032

North DakotaWilliston, ND . .. .. .. .. .. .. .. .. .. .. .. .. .. .. 701.774.8691

OklahomaOklahoma City, OK .. .. .. .. .. .. .. .. .. .. .. 405.799.7270

TexasMidland, TX .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 432.561.8101 Pleasanton, TX . .. .. .. .. .. .. .. .. .. .. .. .. .. 830.224.6400

Stocking locations:

For general inquires and to contact our stocking locations please call

1-800-GET RODS.

ColoradoHudson, CO

KansasGreat Bend, KSHugoton, KS

MississippiHeidelberg, MS

MontanaBaker, MT

New MexicoFarmington, NM

TexasKilgore, TX

WyomingCasper, WY

RL 1119©2019 Apergy Corporation. All Rights Reserved. apergyals.com