Steel Products Site Specific Buyers Guide
-
Upload
albert0726 -
Category
Documents
-
view
15 -
download
1
Transcript of Steel Products Site Specific Buyers Guide
Site Specific Buyers GuideMTS Wireless ComponentsStep-by-Step Instructions
Steel Products
introduction
This Site Specific Buyers Guide provides you with essential information to identify
the steel products needed for your site specific applications. It takes you step-by-step
through the decision making process of ordering antenna mounting components for
lattice towers, monopoles, and roof-top applications. Since no two sites are exactly
the same, this easy-to-use guide provides the questions and answers you need to
consider for each unique site and product type. Now you can be assured that the
products you order are correct for your wireless component requirements.
Ordering Steel Products has never been easier.
For a complete list of steel products and detailed specifications, visit
www.andrew.com/products/steel or request the Steel Products Catalog
(bulletin CA-101163-EN).
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
tower applications...............................................................................1
quick-tee™ sector frames .....................................................................................2
universal cable ladder kits....................................................................................3
star support brackets ...........................................................................................3
monopole co-location applications ........................................................4
monopole co-location t-frame kits ........................................................................5-6
low-profile co-location platform kits......................................................................6-7
upper support rail kits for co-location platforms ........................................................7
low profile chain mounts......................................................................................8
ex-press™ coaxial mounting band.........................................................................8
roof-top applications ...........................................................................9
non-penetrating roof frames ...........................................................................10-11
cantilever wall mount bracket .............................................................................11
self splicing, coax cover kits ...............................................................................12
z-bracket, wall coax support covers.....................................................................12
horizontal z-brackets .........................................................................................12
two-post waveguide bridge kits ..........................................................................13
four-post waveguide bridge kits ..........................................................................13
equipment platform solutions...............................................................................14
index by part number ........................................................................15
table of contents
Choose the Quik-Tee™ Sector Frame (page 2)
1. What is the face width (determined by the horizontal pipe separation)?Options: 10 ft 6 in or 12 ft 6 in (14 ft 6 in available, not shown)
2. How many antenna pipes are required (determined by the number of antennas per sector)?Options: 2, 3, or 4 pipes
3. What is the antenna pipe length (determined by the size of the antenna specified)Options: 72 in, 96 in, or 126 in
Choose the Cable Support (page 3)
Cable Ladder:
1. How many holes are required (determined by the amount of coaxial cable required, coaxial cable may be stacked using SnapStak™ hangers)Options: 6, 9, or 12 holes
2. What is the section length (determined by the length needed to reach the mount)?Options: 10 ft or 20 ft sections
Star Support Brackets:
1. What is the size of the tower leg?Options: up to 5 in or up to 10 in
Choose the Waveguide Bridge (page 13)
1. What is the bridge width (determined by the amount of coaxial cable required within the three levels)?Options: 12 in or 24 in
2. What is the anchorage type (determined by the ground surface)?Options: direct burial or base shoe
3. How many posts are required (determined by the amount of support required)?Options: 2 or 4 posts
4. What is the post length (determined by the height required)?Options: 10 ft 6 in, 13 ft 4 in, 15 ft, or 21 ft
Choose the Equipment Platform (page 14)
1. What platform size is required (determined by the size of the cabinets for the site,custom designs available)?Options: 10 ft x 10 ft, 10 ft x 15 ft, or 10 ft x 20 ft (for raw land-AL, for roof-top-DF)
1 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
Quik-Tee™ Sector Frame
(page 2)
Cable Ladder(page 3)
WaveguideBridge Kits(page 13)
Equipment Platform(page 14)
Tower Co-location
step-by-step application guide
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 2
Quik-Tee™ Sector FramesApplication: Lattice towers
Size: 10 ft 6 in (3.1 m) to 12 ft 6 in (3.8 m) face
Design: Welded frame with 48 in (1.2 m) stand-off
Feature: Quickly assembled, dual pivoting frame withuniversal taper kit. Patented.
Mounts to: Straight or tapered legs up to 8 in OD, 8 in angle 60°, or 6 in angle 90°
Material: Hot dip galvanized steel
Includes: Frame, clamps, stiff arm, pipes and saddlemounts
Order Separately: Additional stiff arm for increased wind rating
Face Width EPA (no ice, sq ft): EPA (1/2 in radial ice, sq ft):
10 ft 6 in Face 13.6 17.5
12 ft 6 in Face 16.3 20.6
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 90 mph per latest revision of TIA/EIA 222 at 150 ft AGL
*Typical installation of four 72 in x 8 in panel antennas per sector
Wind rating* with use of second stiff arm, (purchased separately)
120 mph per latest revision of TIA/EIA 222
140 mph 3-second gust, Exposure “D” per FBC, at 150 ft AGL
NOTE: 14 ft 6 in Sector Frames available upon request
tower applications
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Quik-Tee™ Sector Frames 10 ft 6 in (3.1 m) wide
QT-SF10-2-72 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 377.97 171.4 EachTwo 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
QT-SF10-2-96 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 402.97 182.8 EachTwo 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
QT-SF10-2-126 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 415.37 188.4 EachTwo 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
QT-SF10-3-72 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 398.97 181 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
QT-SF10-3-96 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 436.47 198 EachThree 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
QT-SF10-3-126 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 455.07 206.4 EachThree 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
QT-SF10-4-72 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 419.97 190.5 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
QT-SF10-4-96 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 469.97 213.2 EachFour 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
QT-SF10-4-126 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 494.77 224.4 EachFour 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
Quik-Tee™ Sector Frames 12 ft 6 in (3.8 m) wide
QT-SF12-2-72 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 392.96 178.2 EachTwo 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
QT-SF12-2-96 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 417.96 189.6 EachTwo 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
QT-SF12-2-126 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 430.36 195.2 EachTwo 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
QT-SF12-3-72 Quik-TeeTM Sector Frame, 12 ft 6 in (3.8 m). 413.96 187.8 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
QT-SF12-3-96 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 451.46 204.8 EachThree 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
QT-SF12-3-126 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 470.06 213.2 EachThree 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
QT-SF12-4-72 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 434.96 197.3 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
QT-SF12-4-96 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 484.96 220 EachFour 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
QT-SF12-4-126 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 509.76 231.2 EachFour 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
Additional Stiff Arm Kit
SA-B10 Stiff Arm Bracket, with two threaded 2-3/8 in 53 24.1 EachOD x 63 in (60.3 mm OD x 1.6 m) pipes
10’-6”
(3.1m)
48” (1.2m)
40”(1m)
10’ -6” or 2’-6”
Stand-off Distance
Dual Pivot Points
(3.1m or 3.8m)
P A R T N U M B E R G U I D E
Q T - S F 1 2 - 3 - 7 2
DESCRIPTIONFACE
WIDTHPIPEQTY
PIPELENGTH
Quick-Tee Sector Frame
12’ 3 AntennaPipes
72”
3 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
2”(50.8mm)
18”
(457.2mm)
tower applications
Universal Cable Ladder Kits ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
10 ft (3 m) Universal Cable Ladder Kits
CL-0610-U Universal Cable Ladder Kit, 20 in wide x 10 ft long 57 25.9 Each(355.6 mm x 3 m), 6-hole rung. Includes universal hardware kit for round and angle members.
CL-0910-U Universal Cable Ladder Kit, 30 in wide x 10 ft long 59 27.0 Each(762 mm x 3 m), 9-hole rung. Includes universal hardware kit for round and angle members.
CL-1210-U Universal Cable Ladder Kit, 38 in wide x 10 ft long 62 28.0 Each(1 m x 3 m), 12-hole rung. Includes universal hardware kit for round and angle members.
20 ft (6 m) Universal Cable Ladder Kits
CL-0620-U Universal Cable Ladder Kit, 20 in wide x 20 ft long 112 50.8 Each(355.6 mm x 6 m), 6-hole rung. Includes universal hardware kit for round and angle members.
CL-0920-U Universal Cable Ladder Kit, 30 in wide x 20 ft long 117 52.9 Each(762 mm x 6 m), 9-hole rung. Includes universal hardware kit for round and angle members.
CL-1220-U Universal Cable Ladder Kit, 38 in wide x 20 ft long 121 55.1 Each(1 m x 6 m), 12-hole rung. Includes universal hardware kit for round and angle members.
Application: Lattice towers
Size: 10 ft (3 m) and 20 ft (6 m) in three widths
Design: Angle rails with bolt-on channel rungs
Feature: Complete ladder kit
Mounts to: Round and angle legs
Material: Hot dip galvanized steel
Includes: Ladder, splice plates, and attachment kits
20”(508mm)
40”(1.0m)
10’(3.0m)
20’(6.1m)
20”(508mm)
40”(1.0m)
20”30”
38”
(508mm)(762mm)
(965.2mm)
Star Support BracketsApplication: Lattice towers
Size: 3/4 in (19.1 mm) and 7/16 in (11.1 mm) holes
Design: Bolt together stand-off mount
Feature: Expandable mounting solution
Mounts to: Round and angle legs (see table)
Material: Hot dip galvanized steel
Includes: Bracket
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Tee Bracket Kits
SS-TB2550 Star Support Tee Bracket for 1-1/2 in to 5-9/16 in 8 3.6 EachOD (38.1 mm to 141.3 mm OD) round members and 2-1/2 in to 5 in (50.8 mm to 127 mm) angle members
SS-TB6080 Star Support Tee Bracket for 4 in to 10-3/4 in 10 4.5 EachOD (101.6 mm to 273.1 mm OD) round members and 4 in to 8 in (101.6 mm to 203.2 mm) angle members
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 4
step-by-step application guide
Low-profile Co-location Platform
(pages 6-7)
Co-location T-frame Kit(pages 5-6)
Ex-Press™ Coax Mounting Bands
(page 8)
Waveguide Bridge Kits(page 13)
Equipment Platform (page 14)
Monopole Co-location
Choose the Monopole Antenna Mount Co-location Kit (pages 5-8)
Co-location T-frame Kits (3 sector with 36 in stand-off)
1. What is the face width (determined by the horizontal separation required)?Options: 12 ft 6 in or 14 ft 6 in
2. What is the ring mount size required (determined by the diameter of the monopole)?Options: 10 in to 30 in or 30 in to 60 in
3. How many antenna pipes are required (determined by the number of antennas per sector)?Options: 6, 9, or 12 pipes
4. What is the antenna pipe length (determined by the size of the antenna specified)?Options: 72 in or 96 in
Low-profile Co-location Platform Kits (3 sector grated platform kit)
1. What is the face width (determined by the horizontal separation required)?Options: 12 ft 6 in or 14 ft 6 in
2. What is the ring mount size required (determined by the diameter of the monopole)?Options: 10 in to 30 in or 30 in to 60 in
3. How many antenna pipes are required (determined by the number of antennas per sector)?Options: 9 or 12 pipes
4. What is the antenna pipe length (determined by the size of the antenna specified)?Options: 72 in, 96 in, or 126 in
Low-profile Chain Mounts (3 or 6 sector kits)
1. How many antenna pipes are required?Options: 3 or 6 pipes
2. What is the antenna pipe length (determined by the size of the antenna specified)?Options: 72 in or 96 in
3. What size mount is required for the monopole?Options: 8 in to 30 in OD or 60 in OD
Upper Support Rail Kit(page 7)
Choose your Ex-Press™ Coaxial Mounting Band (page 8)
1. How many coaxial mounting bands are needed?Option: one band needed every 3 ft or 4 ft
Choose the Waveguide Bridge (page 13)
(See options on Page 1 of this guide)
Choose the Equipment Platform (page 14)
(See options on Page 1 of this guide)
5 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
monopole applications
Monopole Co-location T-frame Kits
Application: Monopoles
Size: 12 ft 6 in (3.8 m) and 14 ft 6 in (4.4 m) face
Design: 3-sector
Feature: Complete co-location kit
Mounts to: 10 in to 60 in (254 mm to 1542 mm) ODmonopole
Material: Hot dip galvanized steel
Includes: Ring mount, support arm, and pipe mounts
Order Separately: Work platforms
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
12 ft 6 in (3.8 m) T-frame Kits, 10 in to 30 in (254 mm to 762 mm) OD
MC-K12S-6-72 Monopole Co-location T-frame Kit, 957.0 434.1 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with six 2-3/8 in OD x 72 in pipe mounts.
MC-K12S-6-96 Monopole Co-location T-frame Kit, 1004.7 455.7 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with six 2-3/8 in OD x 96 in pipe mounts.
MC-K12S-9-72 Monopole Co-location T-frame Kit, 1055.4 478.7 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 72 in pipe mounts.
MC-K12S-9-96 Monopole Co-location T-frame Kit, 1127.1 511.3 Each10 in–30 in OD, 36 in sand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 96 in pipe mounts.
MC-K12S-12-72 Monopole Co-location T-frame Kit, 1153.8 523.4 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with twelve 2-3/8 in OD x 72 in pipe mounts.
MC-K12S-12-96 Monopole Co-location T-frame Kit, 1249.5 566.8 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with twelve 2-3/8 in OD x 96 in pipe mounts.
12 ft 6 in (3.8 m) T-frame Kits, 30 in to 60 in (762 mm to 1524 mm) OD
MC-K12L-6-72 Monopole Co-location T-frame Kit, 1076.7 488.4 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with six 2-3/8 in OD x 72 in pipe mounts.
MC-K12L-6-96 Monopole Co-location T-frame Kit, 1124.5 510.1 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with six 2-3/8 in OD x 96 in pipe mounts.
MC-K12L-9-72 Monopole Co-location T-frame Kit, 1175.2 533.1 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 72 in pipe mounts.
MC-K12L-9-96 Monopole Co-location T-frame Kit, 1246.9 565.6 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 96 in pipe mounts.
MC-K12L-12-72 Monopole Co-location T-frame Kit, 1273.7 577.8 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with twelve 2-3/8 in OD x 72 in pipe mounts.
MC-K12L-12-96 Monopole Co-location T-frame Kit, 1369.3 621.1 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with twelve 2-3/8 in OD x 96 in pipe mounts.
14 ft 6 in (4.4 m) T-frame Kits, 16 in to 30 in (330.2 mm to 762 mm) OD
MC-K14S-6-72 Monopole Co-location T-frame Kit, 1028.9 466.7 Each16 in–30 in OD, 36 in stand-off, 14 ft 6 in face, with six 2-3/8 in OD x 72 in pipe mounts.
MC-K14S-6-96 Monopole Co-location T-frame Kit, 1076.7 488.4 Each16 in–30 in OD, 36 in stand-off, 14 ft 6 in face, with six 2-3/8 in OD x 96 in pipe mounts.
MC-K14S-9-72 Monopole Co-location T-frame Kit, 1127.4 511.4 Each16 in–30 in OD, 36 in stand-off, 14 ft 6 in face, with nine 2-3/8 in OD x 72 in pipe mounts.
MC-K14S-9-96 Monopole Co-location T-frame Kit, 1199.1 543.9 Each16 in–30 in OD, 36 in stand-off, 14 ft 6 in face, with nine 2-3/8 in OD x 96 in pipe mounts.
MC-K14S-12-72 Monopole Co-location T-frame Kit, 1225.9 556.1 Each16 in–30 in OD, 36 in stand-off, 14 ft 6 in face, with twelve 2-3/8 in OD x 72 in pipe mounts.
MC-K14S-12-96 Monopole Co-location T-frame Kit, 1321.5 599.4 Each16 in–30 in OD, 36 in stand-off, 14 ft 6 in face, with twelve 2-3/8 in OD x 96 in pipe mounts.
T-frames continued on next page
Face Width EPA (no ice, sq ft): EPA (1/2 in radial ice, sq ft):
12 ft 6 in Face 11.4 14.5
14 ft 6 in Face 12.8 16.3
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222
140 mph 3-second gust, Exposure “D” per FBC, at 150 ft AGL
*Typical installation of four 72 in x 8 in panel antennas per sector
2-3/8” OD(60.3mm)
3-1/2” OD(89mm)
12’-6” or 14’ -6”
(3.8m or 4.4m)
36”(914.4mm)
P A R T N U M B E R G U I D E
M C - K 1 2 S - 9 - 7 2
DESCRIPTIONFACE
WIDTHPIPEQTY
PIPELENGTH
Monopole T-Frame 12’ 10”-30”Ring
Mount
9AntennaPipes
72”
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 6
monopole applications
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
12 ft 6 in (3.8 m) Co-Location Platform Kits, 10 in to 30 in (254 mm to 762 mm) OD
MC-PK12S-9-72 Low-Profile Co-location Platform Kit, 1418.6 643.5 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.
MC-PK12S-9-96 Low-Profile Co-location Platform Kit, 1490.4 676.0 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.
MC-PK12S-9-126 Low-Profile Co-location Platform Kit, 1562.4 708.7 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
MC-PK12S-12-72 Low-Profile Co-location Platform Kit, 1517.1 688.2 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.
MC-PK12S-12-96 Low-Profile Co-location Platform Kit, 1612.8 731.6 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.
MC-PK12S-12-126 Low-Profile Co-location Platform Kit, 1708.8 775.1 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
Low-profile platform kits continued on next page
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
14 ft 6 in (4.4 m) T-frame Kits, 30 in to 60 in (762 mm to 1524 mm) OD
MC-K14L-6-72 Monopole Co-location T-frame Kit, 1148.7 521.1 Each30 in–60 in OD, 36 in stand-off, 14 ft 6 in face, with six 2-3/8 in OD x 72 in pipe mounts.
MC-K14L-6-96 Monopole Co-location T-frame Kit, 1196.5 542.7 Each30 in–60 in OD, 36 in stand-off, 14 ft 6 in face, with six 2-3/8 in OD x 96 in pipe mounts.
MC-K14L-9-72 Monopole Co-location T-frame Kit, 1247.2 565.7 Each30 in–60 in OD, 36 in stand-off, 14 ft 6 in face, with nine 2-3/8 in OD x 72 in pipe mounts.
MC-K14L-9-96 Monopole Co-location T-frame Kit, 1318.9 598.3 Each30 in–60 in OD, 36 in stand-off, 14 ft 6 in face, with nine 2-3/8 in OD x 96 in pipe mounts.
MC-K14L-12-72 Monopole Co-location T-frame Kit, 1345.7 610.4 Each30 in–60 in OD, 36 in stand-off, 14 ft 6 in face, with twelve 2-3/8 in OD x 72 in pipe mounts.
MC-K14L-12-96 Monopole Co-location T-frame Kit, 1441.3 653.8 Each30 in–60 in OD, 36 in stand-off, 14 ft 6 in face, with twelve 2-3/8 in OD x 96 in pipe mounts.
Low-profile Co-location Platform KitsApplication: Monopoles
Size: 12 ft 6 in (3.8 m) or 14 ft 6 in (4.4 m) face
Design: Corner-grated platform
Feature: Complete kit
Mounts to: 10 in to 60 in OD (254 mm to 1524 mm)
Material: Hot dip galvanized steel
Includes: Platform, ring mount, and pipe mounts.
Order Separately: Support rail kit
Monopole Co-location T-frame Kitscontinued
P A R T N U M B E R G U I D E
M C - P K 1 2 S - 1 2 - 9 6
DESCRIPTIONFACE
WIDTHPIPEQTY
PIPELENGTH
Monopole ColocationPlatform Kit
12’ 10”-30”Ring
Mount
12AntennaPipes
96”
7 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
12' -6" or 14' -6"(3.8m or 4.4m)
monopole applications
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
14 ft 6 in (4.4 m) Co-Location Platform Kits, 10 in to 30 in (254 mm to 762 mm) OD
MC-PK14S-9-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1518.9 689.0 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14S-9-96 Low-Profile Co-location Platform Kit, 14 ft 6 in 1590.7 721.5 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14S-9-126 Low-Profile Co-location Platform Kit, 14 ft 6 in 1662.6 754.2 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 931.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
MC-PK14S-12-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1617.4 733.7 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14S-12-96 Low-Profile Co-location Platform Kit, 14 ft 6 in 1713.0 777.0 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14S-12-126 Low-Profile Co-location Platform Kit, 1809.0 820.6 Each14 ft 6 in (4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
14 ft 6 in (4.4 m) Co-Location Platform Kits, 30 in to 60 in (762 mm to 1524 mm) OD
MC-PK14L-9-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1805.5 819.0 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Nine 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14L-9-96 Low-Profile Co-location Platform Kit, 14 ft 6 in 1877.2 851.5 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Nine 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14L-9-126 Low-Profile Co-location Platform Kit, 14 ft 6 in 1949.2 884.2 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Nine 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
MC-PK14L-12-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1904.0 863.7 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14L-12-96 Low-Profile Co-location Platform Kit, 14 ft 6 in 1999.6 907.0 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Twelve 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14L-12-126 Low-Profile Co-location Platform Kit, 14 ft 6 in 2095.6 950.6 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Twelve 2-3/8 in OD x 126 in (60.3 mm x 3.2 m) pipe mounts included.
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Upper Support Rail Kits for Co-location Platforms
MT-195-12 Upper Support Rail Kit for Co-location Platforms, 244.6 111.0 Each12 ft 6 in face.
MT-195-14 Upper Support Rail Kit for Co-location Platforms, 316.6 143.6 Each14 ft 6 in face.
Face Width EPA (no ice, sq ft): EPA (1/2 in radial ice, sq ft):
12 ft 6 in Face 8.75 11.3
14 ft 6 in Face 10.2 13.1
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222
140 mph 3-second gust, Exposure “D” per FBC, at 150 ft AGL
*Typical installation of four 72 in x 8 in panel antennas per sector
Low-profile Co-location Platform Kitscontinued
12' -6" or 14' -6"(3.8m or 4.4m)
3-1/2" OD(89mm)
Upper Support Rail Kits for Co-location Platforms
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 8
6”To Pipe Face
(153mm)
16’Long Chain
(4.9m)
2-3/8”OD Pipe
(60.3mm)
monopole applications
Low Profile Chain MountsApplication: Monopoles
Size: 2-3/8 in (60.3 mm) OD pipe mounts
Design: 3- or 6- antenna chain mounts
Feature: Universal, low profile mount
Mounts to: 8 in to 60 in (203.2 mm to 1524 mm) OD
Material: Hot dip galvanized steel
Includes: See ordering information
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Triple Chain Mount Kits, 8 in to 30 in (203.2 mm to 711.2 mm) OD, 25 in to 94.2 in (635 mm to 2393 mm) circumference
CM-30T-72 Triple Chain Mount Kit, three 2-3/8 in OD x 113.76 51.6 Each72 in pipes, 8 ft chain
CM-30T-96 Triple Chain Mount Kit, three 2-3/8 in OD x 151.26 68.6 Each96 in pipes, 8 ft chain
Triple Chain Mount Kits, 8 in to 60 in (203.2 mm to 1524 mm) OD, 25 in to 188 in (635 mm to 4785 mm) circumference
CM-60T-72 Triple Chain Mount Kit, three 2-3/8 in OD x 123.76 56.1 Each72 in pipes, 16 ft chain
CM-60T-96 Triple Chain Mount Kit, three 2-3/8 in OD x 163.26 74.1 Each96 in pipes, 16 ft chain
Six Antenna Chain Mount Kits, 14 in to 60 in (356 mm to 1524 mm) OD, 44 in to 188 in (1117 mm to 4785 mm) circumference
CM-606-72 Six Antenna Mount Kit, three 2-3/8 in OD x 231 104.8 Each72 in pipes, 16 ft chain
CM-606-96 Six Antenna Mount Kit, three 2-3/8 in OD x 275 124.7 Each96 in pipes, 16 ft chain
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 120 mph (BWS) 1/2 in radial ice at100 ft AGL per latest revision ofTIA/EIA—222
*Typical installation of one 96 in x 10 in panel antenna per sectorTriple chain mount
Six antenna chain mount
6” to Pipe Face(153mm)
2-3/8” OD Pipe(60.3mm)
8’ or 16’Long Chain
(2.44m or 4.9m)
Ex-Press™ Coaxial Mounting BandApplication: Monopoles
Size: 3/4 in (19.1 mm) and 7/16 in (11.1 mm) holes
Design: Coaxial support for the outside or inside of roundstructures
Feature: Universal expansion/compression band with quickclamp locking features. *Patent Pending
Mounts to: 10 in to 60 in (254 mm to 1524 mm) OD roundor polygon monopole
Material: Aluminum and hot dip galvanized steel
Includes: Bracket and hardware
Order Separately: Snap-in hangers, butterfly hangers, coaxial blocks
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
EX-P1060 Expansion/Compression Coaxial Mounting Band 6.2 2.8 Eachfor 10 in to 60 in (254 mm to 1524 mm) OD round or polygon monopoles or 36 in to 60 in (914.4 mm to 1524 mm) ID access tubes
EX-PH3 3 Hole Coaxial Mounting Bracket for expanding 2.8 1.2 Kit of 10line capacity on Ex-Press™ Band
3”(76.2mm)
2”(50.8mm)
1.25”(31.75mm)
P A R T N U M B E R G U I D E
C M - 6 0 T - 7 2
DESCRIPTIONMONOPOLE
ODPIPEQTY
PIPELENGTH
Chain Mount 60” 3Pipes
72”
9 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
Roof-top Applications
step-by-step application guide
Cantilever Wall Mount Bracket
(page 11)
Equipment Platform
(page 14)
Self-splicing, Coax Cover Kits
for SnapStack™ Hangers
(page 12)
Non-penetratingRoof Frames
(pages 10-11)
Z-bracket, Wall Coax Support Coversfor SnapStak™ Hangers
(page 12)
Choose the Roof-top Antenna Mount (pages 10-11)
Non-penetrating Roof Frames
1. What is the face width (determined by the horizontal separation required)?
Options: 7 ft 6 in, 10 ft 6 in, 12 ft 6 in, or 14 ft 6 in
2. How many antenna pipes are required (determined by the number of antennas per sector)?
Options: 2, 3, or 4 pipes
3. What is the antenna pipe length (determined by the size of the antenna specified)?
Options: 72 in, 96 in, or 126 in
Cantilever Wall Mount Kit (solid and hollow walls)
1. How many kits are required?
Option: one kit per antenna
2. What is the antenna pipe length (determined by the size of the antenna specified)?
Options: 72 in, 96 in, or 126 in (order separately)
Choose the Cable Support-Roof-top Cover Applications (page 12)
Self-splicing Coaxial Cable Cover Kits
1. How many holes are required (determined by the amount of coaxial cables required, coaxial
cables may be stacked using SnapStak™ hangers)?
Options: 4, 8, or 12 holes
2. What are the stacking configurations available?
Options: 7/8 in cable (triple stacked), 1-1/4 in cable and 1-5/8 in cable (double stacked)
3. What is the section length (determined by the sectional length needed to reach the mount)?
Option: 8 ft
Z-bracket, Wall Coaxial Cable Support Covers (cover and Z-brackets sold separately)
1. How many holes are required (determined by the amount of coaxial cables required,
coaxial cables may be stacked)?
Options: 4, 8, or 12 holes
2. What is the width (determined by the amount of coaxial cables required,
coaxial cables may be stacked using SnapStak™ hangers)?
Options: 11-1/2 in, 23-1/2 in, or 35-1/2 in
3. What are the stacking configurations available?
Options: 7/8 in (triple stacked), 1-1/4 in and 1-5/8 in (double stacked)
4. What is the section length (determined by the sectional
length needed to reach the mount)?
Option: 8 ft
5. What Z-bracket is required (determined by
the cover purchased)?
Options: 4, 8, or 12 hole Z-bracket (2 per cover)
Choose the Equipment Platform (page 14)
(See options on Page 1 of this guide)
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 10
roof-top applications
Non-penetrating Roof FramesApplication: Roof-top
Size: 7 ft (2.1 m) to 14 ft 6 in (4.4 m) face
Design: Single sector roof mount
Feature: Complete kit
Material: Hot dip galvanized steel
Includes: Rubber mats, and pipe mounts
Wind Rating*: 85 mph (BWS) per latest revision of TIA/EIA 222
Exposure "C" per UBC, at 100 ft AGL
*Typical installation of four 120 in x 8 in panel antennas per sectorEngineering data table for ballast available upon request
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Non-Penetrating Roof Frame, 7 ft (2.1 m) wide
RF-N7-2-72 Non-Penetrating Roof Frame, 7 ft (2.1 m). 384.5 174.4 EachTwo 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N7-2-96 Non-Penetrating Roof Frame, 7 ft (2.1 m). 399.0 181.0 EachTwo 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N7-2-126 Non-Penetrating Roof Frame, 7 ft (2.1 m). 416.9 189.1 EachTwo 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m) wide
RF-N10-3-72 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 421.1 191.0 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N10-3-96 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 442.7 200.8 EachThree 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N10-3-126 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 469.7 213.1 EachThree 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
RF-N10-4-72 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 442.7 200.8 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N10-4-96 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 471.5 213.9 EachFour 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N10-4-126 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 507.5 230.2 EachFour 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m) wide
RF-N12-3-72 Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m). 436.8 198.1 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N12-3-96 Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m). 458.4 207.9 EachThree 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N12-3-126 Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m). 485.4 220.2 EachThree 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
RF-N12-4-72 Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m). 458.4 207.9 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N12-4-96 Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m). 487.2 221.0 EachFour 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N12-4-126 Non-Penetrating Roof Frame, 12 ft 6 in (3.8 m). 523.2 237.3 EachFour 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
Non-penetrating roof frames continued on next page
41.5”(1.05m)
33.1”(840.7mm)
74.6”(1894.8mm)
84”(2.1m)
Cinder BlockTrays
7’, 10’-6”, 12’ -6” or 14 -6”(2.1m, 3.1m, 3.8, or 4.4m)
100”
(2540.0mm)
P A R T N U M B E R G U I D E
R F - N 1 0 - 4 - 9 6
DESCRIPTIONFACE
WIDTHPIPEQTY
PIPELENGTH
Non-PenetratingRoof Frame
10’ 4 AntennaPipes
96”
11 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
roof-top applications
Non-penetrating Roof Framescontinued
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m) wide
RF-N14-3-72 Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m). 438.8 199.0 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N14-3-96 Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m). 460.4 208.8 EachThree 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N14-3-126 Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m). 487.4 221.1 EachThree 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
RF-N14-4-72 Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m). 460.4 208.8 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.
RF-N14-4-96 Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m). 489.2 221.9 EachFour 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.
RF-N14-4-126 Non-Penetrating Roof Frame, 14 ft 6 in (4.5 m). 525.2 238.2 EachFour 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.
Non-penetrating roof frame
Cantilever Wall Mount Bracket
Application: Roof-top
Size: 14-1/2 in (368.3 mm) wide, 2-3/4 inor 5-1/2 in depth
Design: Z-shaped wall brackets
Feature: Low profile design
Mounts to: Solid or hollow walls
Material: Hot dip galvanized steel
Includes: Two brackets, u-bolts, anchors, and wall mount hardware
Order Separately: 2-3/8 in (60.3 mm) OD pipe
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
MT-250 Cantilever Wall Mount Bracket. Order 2-3/8 in 20.6 9.3 Kit of 2(60.3 mm) OD pipe separately.
MT-250L Cantilever Wall Mount Bracket. 5-1/2 in Stand- 24.5 11.1 Kit of 2off. Order 2-3/8 in (60.3 mm) OD pipe separately.
Pre-Cut Plain End Pipe, Galvanized Steel
MT-651 Plain End Pipe 2-3/8 in OD x 72 in 21 9.53 Each(60.3 mm OD x 1.8 m)
MT-651-96 Plain End Pipe 2-3/8 in OD x 96 in 33.5 15.20 Each(60.3 mm OD x 2.4 m)
MT-537 Plain End Pipe 2-3/8 in OD x 126 in 39.7 18.01 Each(60.3 mm OD x 3.2 m)
12”
(305mm)
2-3/4” or 5-1/2”
(69.9mm or 139.7mm)
3”
(76.2mm)
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 12
roof-top applications
Self Splicing, Coax Cover Kits for SnapStak™ Snap-in HangersApplication: Roof-top
Size: 8 ft (2.4 m) long
Design: Self-splicing cover with PVC sleeper supports and hold-down clamps, simplified cover installation
Feature: Stack up to two 1-5/8 in or three 7/8 in SnapStak™ hangers per hole–three versions
Mounts to: Non-penetrating design
Material: Hot dip galvanized steel
Includes: Channel, three sleepers, hold-down clamps, and hardware
Order Separately: Adjustable splice for roof-top coaxial cable bridge
96”
(2.4m)
4” Square(101.6mm)
11-1/4”, 21-1/4” or 33”(285.8mm, 539.8mm or 838.2mm)
7”(177.8mm)
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
RT-CB4D Roof-Top Cover Kits for SnapStak™ 86.0 39.0 EachSnap-in Hangers, 4 holes
RT-CB8D Roof-Top Cover Kits for SnapStak™ 122.5 55.6 EachSnap-in Hangers, 8 holes
RT-CB12D Roof-Top Cover Kits for SnapStak™ 162.5 73.7 EachSnap-in Hangers, 12 holes
Shown with double 1-5/8 in SnapStak™ hangers.Allows triple stacking of 7/8 in SnapStak™ hangers.
Z-bracket, Wall Coax SupportCovers for SnapStak™ HangersApplication: Roof-top
Size: 8 ft (2.4 m) long
Design: Solid cover for 4-, 8-, and 12-hole z-brackets
Feature: Stack up to two 1-5/8 in or three 7/8 inSnapStak™ hangers per hole – three versions
Mounts to: Penetrating design
Material: Hot dip galvanized steel
Includes: Cover
Order Separately: Z-brackets and anchors
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
WC-SC4D Z-bracket, Wall Coax Support Covers 73.3 33.2 Eachfor SnapStak™ Hangers. ZB-H4 Z-bracketssold separately.
WC-SC8D Z-bracket, Wall Coax Support Covers 99.5 45.1 Eachfor SnapStak™ Hangers. ZB-H8 Z-bracketssold separately.
WC-SC12D Z-bracket, Wall Coax Support Covers 125.8 57.0 Eachfor SnapStak™ Hangers. ZB-H12 Z-bracketssold separately.
Allows double stacking of 1-5/8 in SnapStak™ hangers.Allows triple stacking of 7/8 in SnapStak™ hangers.
96”
(2.4m)
11-1/2”, 23-1/2”, or 35-1/2”(292.1mm, 597mm, or 902mm)
9”(228.6mm)
Horizontal Z-bracketsApplication: Roof-top
Size: 3/4 in (19.1 mm) and 7/16 in (11.1 mm) holes
Design: Z-shaped coaxial cable bracket
Feature: Fits any hanger style
Material: Hot dip galvanized steel
Includes: Z-bracket
Order Separately: Mounting anchors
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
ZB-H4 Horizontal Z-bracket, 11 in (279.4 mm) wide 2.6 1.2 Eachfor seven runs of coaxial cable
ZB-H8 Horizontal Z-bracket, 23 in (584.2 mm) wide 5.3 2.4 Eachfor fourteen runs of coaxial cable
ZB-H12 Horizontal Z-bracket, 35 in (889 mm) wide 8.1 3.7 Eachfor twenty two runs of coaxial cable
5-1/2”
(139.7mm)
2-7/8”
(73mm)
1-9/16”(39.7mm)
3/4”(19.1mm)
7/16”(11.1mm)
13 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
waveguide bridge components
12” or 24”(305 mm or 610 mm)
3-1/2” OD(89 mm)
13’ -4”, 15’ -4”, or 21’(4.1 m, 4.7 m, or 6.4 m)
10’(3.0 m)
Two-Post Waveguide Bridge Kits
Application: Waveguide bridge
Size: Two sizes
Design: Two-post, safety grating
Feature: Complete kit for coaxial cable support
Material: Hot dip galvanized steel
Includes: Channel, posts, support brackets, caps, trapeze, and hardware
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
WB-K110-B Safety Grated Waveguide Bridge Kit, 325.0 147.4 Each12 in x 10 ft (0.3 m x 3.0 m), with two 13 ft 4 in (4.1 m) direct burial posts
WB-K110-S Safety Grated Waveguide Bridge Kit, 308.0 139.7 Each12 in x 10 ft (0.3 m x 3.0 m), with two 10 ft 6 in (3.2 m) base shoe posts
WB-K210-B Safety Grated Waveguide Bridge Kit, 385.0 174.6 Each24 in x 10 ft (0.6 m x 3.0 m), with two 13 ft 4 in (4.1 m) direct burial posts
WB-K210-B15 Safety Grated Waveguide Bridge Kit, 415.3 188.4 Each24 in x 10 ft (0.6 m x 3.0 m), with two 15 ft4 in (4.7 m) direct burial posts
WB-K210-B21 Safety Grated Waveguide Bridge Kit, 501.2 227.3 Each24 in x 10 ft (0.6 m x 3.0 m), with two 21 ft(6.4 m) direct burial posts
WB-K210-S Safety Grated Waveguide Bridge Kit, 367.0 166.5 Each24 in x 10 ft (0.6 m x 3.0 m), with two 10 ft 6 in (3.2 m) base shoe posts
24”(610 mm)
3-1/2” OD(89 mm)
10’
(3.0 m)
13’ -4”, 15’ -4”, or 21’(4.1 m, 4.7 m, or 6.4 m)
Four-Post Waveguide Bridge KitsApplication: Waveguide bridge
Size: 24 in x 10 ft (0.6 m x 3.0 m)
Design: Four-post, safety grating
Feature: Complete kit for coaxial cable support
Material: Hot dip galvanized steel
Includes: Channel, posts, support brackets, caps, trapeze, and hardware
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
WB-K410-B Safety Grated Waveguide Bridge Kit, 596.0 270.3 Each24 in x 10 ft (0.6 m x 3.0 m), with four 13 ft 4 in (4.1 m) direct burial posts
WB-K410-B15 Safety Grated Waveguide Bridge Kit, 656.6 297.8 Each24 in x 10 ft (0.6 m x 3.0 m), with four 15 ft 4 in (4.7 m) direct burial posts
WB-K410-B21 Safety Grated Waveguide Bridge Kit, 828.3 373.7 Each24 in x 10 ft (0.6 m x 3.0 m), with four 21 ft(6.4 m) direct burial posts
WB-K410-S Safety Grated Waveguide Bridge Kit, 560.0 254.0 Each24 in x 10 ft (0.6 m x 3.0 m), with four 10 ft 6 in (3.2 m) base shoe posts
WB-K110-B WB-K210-S
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 14
site related components
4”(101.6mm)
14.50” Min21.50” Max.
. (368.3mm)(546.1mm)
10.50” Min.17.50” Max.
(266.7mm)(444.5mm)
10', 15', or 20'
(3.0 m, 4.6 m, or 6.1 m)
10'(3.0 m)
Equipment Platform SolutionsApplication: Equipment solutions
Size: 10 ft x 10 ft (3 m x 3 m), 10 ft x 15 ft (3 m x 4.6 m) or 10 ft x 20 ft (3 m x 6.1 m)
Design: Base kits for raw land or roof-top applications
Feature: Easy-to-assemble bolt together design
Material: Hot dip galvanized steel
Includes: Frame, grating, and hardware
Order Separately: Extra legs when required
ORDERING INFORMATION
Part Number Description Wt. lb Wt. kg Kit Qty.
Equipment Platform Bases
EQ-P1010-B Equipment Platform, 10 ft x 10 ft 1570 712.15 Each(3 m x 3 m) base only.
EQ-P1015-B Equipment Platform, 10 ft x 15 ft 2210 1002.46 Each(3 m x 4.6 m) base only.
EQ-P1020-B Equipment Platform, 10 ft x 20 ft 3006 1363.52 Each(3 m x 6.1 m) base only.
Equipment Platforms for Raw Land Installations
EQ-P1010-AL Equipment Platform, 10 ft x 10 ft 1750 793.80 Each(3 m x 3 m) base with four adjustable legs
EQ-P1015-AL Equipment Platform, 10 ft x 15 ft 2480 1124.93 Each(3 m x 4.6 m) base with six adjustable legs
EQ-P1020-AL Equipment Platform, 10 ft x 20 ft 3366 1526.82 Each(3 m x 6.1 m) base with eight adjustable legs
Equipment Platforms for Roof-top Installations
EQ-P1010-DF Equipment Platform, 10 ft x 10 ft 1870 850 Each(3 m x 3 m) base with twelve displacement legs
EQ-P1015-DF Equipment Platform, 10 ft x 15 ft 2610 1186.4 Each(3 m x 4.6 m) base with sixteen displacement legs
EQ-P1020-DF Equipment Platform, 10 ft x 20 ft 3506 1593.6 Each(3 m x 6.1 m) base with twenty displacement legs
Equipment Platform Feet
EQ-P-AL Adjustable Leg for Equipment Platform for 45 20.41 Eachraw land installations
EQ-P-DF Weight Dispersement Leg for Equipment Platform 38 17.24 Each
Note: Equipment platforms in additional sizes available.Contact the Customer Support Center for details.
EQ-P-DF
16” Min.27” Max.
(406.4mm)(685.8mm)
8-1/4” Min. (209.6mm)19-1/4” Max. (489mm)
EQ-P-AL
customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
CL-0610-U TW 3
CL-0620-U TW 3
CL-0910-U TW 3
CL-0920-U TW 3
CL-1210-U TW 3
CL-1220-U TW 3
CM-30T-72 MO 8
CM-30T-96 MO 8
CM-606-72 MO 8
CM-606-96 MO 8
CM-60T-72 MO 8
CM-60T-96 MO 8
EQ-P1010-AL SRC 14
EQ-P1010-B SRC 14
EQ-P1010-DF SRC 14
EQ-P1015-AL SRC 14
EQ-P1015-B SRC 14
EQ-P1015-DF SRC 14
EQ-P1020-AL SRC 14
EQ-P1020-B SRC 14
EQ-P1020-DF SRC 14
EQ-P-AL SRC 14
EQ-P-DF SRC 14
EX-P1060 MO 8
EX-PH3 MO 8
MC-K12L-12-72 MO 5
MC-K12L-12-96 MO 5
MC-K12L-6-72 MO 5
MC-K12L-6-96 MO 5
MC-K12L-9-72 MO 5
MC-K12L-9-96 MO 5
MC-K12S-12-72 MO 5
MC-K12S-12-96 MO 5
MC-K12S-6-72 MO 5
MC-K12S-6-96 MO 5
MC-K12S-9-72 MO 5
MC-K12S-9-96 MO 5
MC-K14L-12-72 MO 6
MC-K14L-12-96 MO 6
MC-K14L-6-72 MO 6
MC-K14L-6-96 MO 6
MC-K14L-9-72 MO 6
MC-K14L-9-96 MO 6
MC-K14S-12-72 MO 5
MC-K14S-12-96 MO 5
MC-K14S-6-72 MO 5
MC-K14S-6-96 MO 5
MC-K14S-9-72 MO 5
MC-K14S-9-96 MO 5
MC-PK12S-12-126 MO 6
MC-PK12S-12-72 MO 6
MC-PK12S-12-96 MO 6
MC-PK12S-9-126 MO 6
MC-PK12S-9-72 MO 6
MC-PK12S-9-96 MO 6
MC-PK14L-12-126 MO 7
MC-PK14L-12-72 MO 7
MC-PK14L-12-96 MO 7
MC-PK14L-9-126 MO 7
MC-PK14L-9-72 MO 7
MC-PK14L-9-96 MO 7
MC-PK14S-12-126 MO 7
MC-PK14S-12-72 MO 7
MC-PK14S-12-96 MO 7
MC-PK14S-9-126 MO 7
MC-PK14S-9-72 MO 7
MC-PK14S-9-96 MO 7
MT-195-12 MO 7
MT-195-14 MO 7
MT-250 RT 11
MT-250L RT 11
MT-537 RT 11
MT-651 RT 11
MT-651-96 RT 11
QT-SF10-2-126 TW 2
QT-SF10-2-72 TW 2
QT-SF10-2-96 TW 2
QT-SF10-3-126 TW 2
QT-SF10-3-72 TW 2
QT-SF10-3-96 TW 2
QT-SF10-4-126 TW 2
QT-SF10-4-72 TW 2
QT-SF10-4-96 TW 2
QT-SF12-2-126 TW 2
QT-SF12-2-72 TW 2
QT-SF12-2-96 TW 2
QT-SF12-3-126 TW 2
QT-SF12-3-72 TW 2
QT-SF12-3-96 TW 2
QT-SF12-4-126 TW 2
QT-SF12-4-72 TW 2
QT-SF12-4-96 TW 2
RF-N10-3-126 RT 10
RF-N10-3-72 RT 10
RF-N10-3-96 RT 10
RF-N10-4-126 RT 10
RF-N10-4-72 RT 10
RF-N10-4-96 RT 10
RF-N12-3-126 RT 10
RF-N12-3-72 RT 10
RF-N12-3-96 RT 10
RF-N12-4-126 RT 10
RF-N12-4-72 RT 10
RF-N12-4-96 RT 10
RF-N14-3-126 RT 11
RF-N14-3-72 RT 11
RF-N14-3-96 RT 11
RF-N14-4-126 RT 11
RF-N14-4-72 RT 11
RF-N14-4-96 RT 11
RF-N7-2-126 RT 10
RF-N7-2-72 RT 10
RF-N7-2-96 RT 10
RT-CB12D RT 12
RT-CB4D RT 12
RT-CB8D RT 12
SA-B10 TW 2
SS-TB2550 TW 3
SS-TB6080 TW 3
WB-K110-B WB 13
WB-K110-S WB 13
WB-K210-B WB 13
WB-K210-B15 WB 13
WB-K210-B21 WB 13
WB-K210-S WB 13
WB-K410-B WB 13
WB-K410-B15 WB 13
WB-K410-B21 WB 13
WB-K410-S WB 13
WC-SC12D RT 12
WC-SC4D RT 12
WC-SC8D RT 12
ZB-H12 RT 12
ZB-H4 RT 12
ZB-H8 RT 12
index by part number
15
Inches Fraction Inches Decimal Millimeters
1/16 0.0625 1.61/8 0.1250 3.23/16 0.1875 4.81/4 0.2500 6.45/16 0.3125 7.93/8 0.3750 9.57/16 0.4375 11.11/2 0.5000 12.79/16 0.5625 14.35/8 0.6250 15.9
11/16 0.6875 17.53/4 0.7500 19.1
13/16 0.8125 20.67/8 0.8750 22.2
15/16 0.9375 23.81 1.0000 25.4
Convert From Convert To Multiply By
Length
foot (ft) meter (m) 0.3048
inch (in) meter (m) 0.0254
inch (in) centimeter (cm) 2.5400
meter (m) foot (ft) 3.2808
meter (m) inch (in) 39.3700
centimeter (cm) inch (in) 0.3937
millimeter (mm) inch (in) 0.0393
Area
square foot (ft≈) square meter (m≈) 0.0929
square meter (m≈) square foot (ft≈) 10.7639
Circle
radius diameter 2.0000
diameter radius 0.5000
diameter circumference 3.1416
radius circumference 6.2832
Weight
pound (lb) kilogram (kg) 0.4536
kilogram (kg) pound (lb) 2.2046
reference and conversion chart
Gage Thickness (inches) Thickness (mm)
10 0.1345 3.416
11 0.1196 3.038
12 0.1046 2.657
13 0.0897 2.278
14 0.0747 1.897
15 0.0673 1.709
16 0.0598 1.519
Pipe Size OD (inches) OD (mm)
1/2” 0.84 21.34
3/4” 1.05 26.67
1” 1.32 33.40
1-1/4” 1.66 42.16
1-1/2” 1.90 48.26
2” 2.38 60.33
2-1/2” 2.88 73.03
3” 3.50 88.90
3-1/2” 4.00 101.60
4” 4.50 114.30
5” 5.56 141.30
6” 6.63 168.30
8” 8.63 219.08
AWG SizeStranded, OD (overall) Solid, OD
Inch Millimeter Inch Millimeter
4/0 0.528 13.41 0.460 11.68
2/0 0.419 10.64 0.409 10.39
1/0 0.373 9.47 0.324 8.23
2 0.292 7.42 0.257 6.53
4 0.232 5.88 0.204 5.18
6 0.184 4.66 0.162 4.11
8 0.146 3.70 0.128 3.25
10 0.116 2.94 0.102 2.59
pipe dimensions
steel thicknesses
AWG wire sizes
fraction/decimal/metric chart
conversion factors
NOTE: Not applicable to coaxial cables
All designs, specifications and availabilities of products and services presented in thisbulletin are subject to change without notice.
Bulletin BR-101198-EN (1/07)© 2007 Andrew Corporation, Westchester, IL 60154 USA
Customer Support CenterFrom North AmericaTelephone: 1-800-255-1479Fax: 1-800-349-5444
InternationalTelephone: +1-708-873-2307Fax: +1-708-349-5444
Internet: www.andrew.com
Andrew Corporation3 Westbrook Corporate CenterSuite 900Westchester, Illinois 60154 US
One Company. A World of Solutions.